25 creativity toolkit for new product development

Creativity Toolkit for New Product
Development
Olivia Hennelly1
Kathryn Cormican2
Computer Integrated Manufacturing Research Unit (CIMRU)
Nun’s Island, National University of Ireland, Galway,
Olivia.Hennelly@NUIGalway.ie 1
, Kathryn.Cormican@NUIGalway.ie 2
Abstract
In the past few years of this 21st century, innovation has become one of the most important and effective ways of
obtaining and sustaining competitive dominance in the market place. Many firms are engaging cross-functional
teams, composed of individuals from a variety of functional areas, to spearhead new product development. The
aim of this paper is to examine the critical success factors involved in the area of creativity and knowledge
communication within cross-functional product development in R&D departments. To facilitate this, existing
literature was reviewed and organisational case studies were conducted, to understand the social and cultural
contexts within which people in an R&D department of medical device and pharmaceutical companies work.
Some of the key findings from the investigation included topics involving knowledge management, project
management, employee selection and departmental systems.
Keywords
Product Development, Creativity, Innovation, R&D Departments
1 Introduction
According to Gupta and Singhal [1993] successful organisations create competitive
advantage through innovation and creativity. In today’s marketplace organisations’ emphasis
is changing from visible assets (such as equipment or technology) to invisible assets (like
creativity and capability). Companies of all sizes increasingly recognise that ideas are their
most precious commodity and employees who produce them are sought-after resources.
Competitive advantage depends heavily on their ability to capitalise on employees’ ideas and
unleash creativity within their working environments. An organisations success is often
measured by the annual profits, level of sales and/or position adjacent to competitors.
Without a product to market an organisations position becomes untenable. Products stem
from innovation, which in turn stems from creativity. There are numerous forms of
innovation, which exist, in modern organisations incremental to radical, product or process
[Wheelwrigt and Chark, 1992], [Cooper and Kleinschmidt, 1996]. The main focus of
organisations has initially been product innovation as this yields the maximum opportunity to
develop competitive advantage. However, in order to maintain and capitalise upon this
opportunity an organisation must develop the innovation process. In other words, they must
focus on the processes and systems that enable systematic product innovation to occur. Most
large-scale product related innovation occurs within a structured environment of a Research
and Development (R&D) Department. This department usually consists of technically
competent individuals who work in team structures on product specific projects. The
involvement of individuals from other departments is determined by company policy and
project requirements. Organisations are constantly faced with the need to alter their systems,
following external developments as “change is the very essence of business growth; … and is
inevitable and unavoidable” [Clarke 1994]. The proficiency within an organisation to
effectively encourage creativity within innovation does not diminish over time, but instead

grows in importance for organisational success. Organisations must adopt proactive practices
in order to mobilise creativity within their working environments. As a result the aims of this
paper are to establish current innovation practices and procedures and investigate the
common shortfalls between the ‘ideal’ scenario and the ‘actual’ working environment.
People drive creativity and creativity drives innovation. Therefore enhancing the creative
output of individuals involved in an innovative working environment will increase the level
of innovation.
2 Existing Theories and Work
The innovation process in an R&D department begins with the idea generation process or
problem recognition stage, which is where creativity primarily occurs [West and Farr, 1990].
Creative ideas, which are generated by the human resources within the organisation, are the
seed of innovation [Ettlie, 2000]. Thus, the organisation that neglects the importance of
creativity, risks a future of no new products or process improvements and will possibly
depends on buying in the methods of others. There is a cycle, which occurs between
creativity, knowledge and communication. This is illustrated in figure 1.
Knowledge
Communication Creativity
Figure 1: Creativity Cycle
All innovation generates knowledge and this knowledge is reused for subsequent creative
ideas [Tidd et al., 1997; Cormican and O’Sullivan, 2003]. Thus the transfer of knowledge
within an innovation environment becomes a critical factor. As such the methods of
communication and knowledge sharing between the cross functional product development
teams, which is a composition selected by many organisations becomes vital [McDonough et
al., 2001]. To achieve innovation there must be ideas and these initially appear from the
individuals in the team. Cross functional work teams provide increased flexibility and
creativeness stemming form the dispersed nature of the skills of the members involved
[Takeuchi and Nonaka 1986]. However, personal inhibitions and environmental pressures
can prevent employees in the organisation from utilising their latent capability for creativity,
which in turn curbs the innovation process [Drucker, 1993; Amabile, 1988]. The ability of an
organisation to recognise and unleash its creative power and deploy the resulting innovation
as a competitive, profitable strength depends on the structure of the organisation. In other
words it is responsibility of the organisation to ensure a culture, which encourages creativity,
is established. Rapid change means quicker knowledge obsolescence and entails constant
internal adaptation including new strategies, structures, processes and tools.
Knowledge management concerns innovating, spreading, sharing and using of knowledge.
Research on knowledge management concerns the management aspect including
organisational learning, personal management, cultural, etc. [Drucker 1998] and the technical
aspect including models, support tools and environments [Zhuge, 2002]. Knowledge
management must ensure that those who know, can share their knowledge with those who do
not have this knowledge, yet need it, and that both personal and tacit knowledge is
maintained within the organisation, in the event that the people with the valuable ideas,

information and knowledge move on and take it with them [Drucker, 1993; Davenport and
Prusak, 2000]. Through effective communication, teams facilitate the exchange of
information and create new knowledge and insights [Tidd et al., 1997]. There is a tendency to
assume that what is relayed through the spoken word in communication with others is fully
understood. However, there exists distortion in meaning as communication occurs such as the
understanding of the terms ‘goals’, ‘actions’ [Cummings and Ting, 2003]. The job of
achieving understanding and insight in mental processes of others is actually quite difficult.
Technical change, product life cycles, market shifts and global competition affect some
industries more than others. Effective communication is essential to the timely availability of
information required by the various members from the different functions and disciplines
present in the team.
3 Research Approach
The research approach selected for this study was field-based research, which is deemed to
be a method of gathering rapidly changing technical and managerial processes [Lewis, 1998].
Case studies are considered to be a form of field based research and are also a form of
research considered to be useful in studying the product innovation process [Workman, 1993;
Dougherty, 1992]. This approach is suitable for exploratory, theory building research where
the emphasis is on sense making and meaning. The strength of case study research is that it
employs various sources of evidence to improve the accuracy and comprehensiveness of
resulting theory [McCutcheon and Meredith, 1993]. The case studies involved in this study,
were compiled from information collected in a selection of semi-structured interviews. This
form of interview is conducted on individuals who are quiet clear about the research
objectives; the questions are usually more open ended to allow for the collection of as much
information as possible through the elaboration of the interviewee. The interviews were
conducted with the directors of research and development departments of three medical
device and pharmaceutical companies based in Ireland, resulting in the completion of a
survey and a company profile. It was important to get a clear image of the methods of project
team selection, task and resource delegation and administration of the research and
development department from the actual person in charge of these duties.
4 Research Findings
Each of the companies involved expressed difficulties in developing a culture of creativity
within their R&D departments. Each company admitted that the focus is directed towards
problem solving instead of encouraging an atmosphere of creativity. The R&D departmental
structure is such that the emphasis is placed on the individual to develop creativity. The
organisations that participated in the case studies stated that there are no formal systems
departmentally to encourage creativity. It fell to each individual core team leader to select an
approach. Some held structured brainstorming sessions, however these were based on an
invitation only system and as a result the same few individuals always attended. There are
individual innovators employed by the organisations, however when they leave there is a
void left within the development section of the innovation process.
There is open access, for all employees to project information. Upon completion a successful
project is scrutinised for all knowledge. Retrieval of this information is seen to be important
as it may add to future projects, however since information from failed projects is not
collected employees often waste time on repeating the same mistakes. Another factor, which
impedes the employee access to important within the department, are the storage methods
selected by the organisations.

There is no effort made to identify possible creative personality types at the recruitment stage
of employment positions within the R&D department. The emphasis is placed on technical
skills and abilities. If an employee is hired for their creative ability, this is based on years of
experience, past inventions and revenue from products developed. This person then takes
responsibility for all creative idea generation within the department.
All of the organisations involved expressed difficulties managing project resources. Often the
organisation will suffer from resource shortages, in terms of people, time and equipment, due
to the prioritisation and size of certain projects. The projects are often timed so as not to
collide with each other with regard to resources, however if there are any problem or delays
there is often a pressure in spreading resources. There are often difficulties in the semantic
language chosen by each department. There are conflicting priorities allocating resources
(staff and equipment) when attempting to coordinate with other functional departments. All
of the key practices and issues are illustrated in table 1.
Practices/Issues Company A Company B Company C
Employment No system to identify
possible creative
personality types at the
recruitment stage.
Will employ one key
innovative person with
experience for the entire
department.
Employees hired based
on technical ability
only.
Structure Employees are
encouraged to utilise the
expertise of employees
from other departments if
required
Team structure rigidly
adhered to, to the point of
hindering interaction.
Loose team structure
with emphasis on
openness.
Knowledge
Retrieval
Difficulty tracking past
project team members to
access information.
Past project members’
identity stored in database
in project finance forms.
No centralised method
of accessing past
project employees.
Information
Analysis
There is no analysis
conducted on
unsuccessful projects.
Unsuccessful projects
analysed for mistakes;
information not reused.
There is no analysis of
conducted on
unsuccessful projects.
Idea Generation Encourage use of
creative tools, ideas
consistently stems from
the same few individuals
All managers adopt
different approaches
towards idea generation
Cannibalise other
organisations to gain
new products and
processes.
Idea generation
vs. problem
solving
Proactive towards idea
generation, experiencing
difficulty selecting
methods to encourage in
all R&D employees
Reactive approach of
problem solving except for
the one innovative
employee
Effort on incorporating
best practices from
cannibalised
organisations
Management Resource shortages due
to mismanagement of
project deadlines
Resource shortages due to
language differences and
possessiveness between
departments
Resource shortages due
to mismanagement of
project deadlines
Table 1: Company Findings
5 Research Analysis
Innovation is a key-determining factor in the success of modern organisations and creativity
is a key aspect of innovation. As such the importance of managing individual creativity
supported by the acquisition, dissemination and use of knowledge is a critical factor in the
innovation process. For the purposes of this paper the organisational procedures of each
organisation were captured in the form of structured interviews. The purpose of the

interviews was to generate a sample of the practices of the population being researched to
identify some characteristics, attitudes or behaviours, this enabled a direct comparison of the
findings from each organisation to highlight either similarities or differences if they appeared.
It was imperative to establish a clear representation of the methods of project team selection,
task and resource delegation and administration of the R&D department from the
management perspective. The preliminary research findings indicate that innovation is an
activity, which cannibalises information from various sources and transforms it into a
marketable new concept. The superlative asset of the innovative process is the human
resource involved but these have to be encouraged and nurtured. The entire process depends
on the transfer and understanding of knowledge and as such it is imperative to facilitate and
enhance this. Given the importance of creativity and innovation in the realm of today’s
organisations, the development of a creativity toolkit to aid in this process was deemed to be
appropriate. A useful starting point for considering a toolkit for creativity is to consider
characteristics of the individuals involved. Examples of personal qualities of creative
individuals have been collated by and described as: openness to experience; independence;
self-confidence; willingness to take risk; sense of humour or playfulness; enjoyment of
experimentation; sensitivity; lack of a feeling of being threatened; personal courage;
unconventionality; flexibility; preference for complexity; goal orientation; internal control;
originality; self-reliance; persistence [Gardner 1993], [Sternberg and Lubart 1999]. The
cognitive repairs literature suggests that organisations can institute practices and procedures
that can overcome these cognitive limitations [Heath et al. 1998]. Thus, although individual
and organisational creativity mechanisms can individually impact innovation performance,
the hypothesis is that the effectiveness at making innovation happen will be greater when
both individual and organisational creativity mechanisms occur simultaneously. The findings
of this study revealed that the key to successfully managing creativity in innovation in
organisations is multifaceted. However, an organisations’ attributes or characteristics can
have a significant impact on creativity initiatives. Therefore organisations must purposefully
construct strategies and structures so as to enhance creativity.
The toolkit will support the organisational effort to manage the creative process more
effectively and maximise its output. The function of the toolkit is to develop a structure that
traps the potential creative drivers and nurtures a creative culture. It also strives to bring
together supporting elements of creativity and provide an infrastructure that will prevent
potential creative ideas being lost. The ultimate aim of this approach is to provide an
organisation with a method for both enhancing the creative abilities of its employees and
allowing the organisation itself to develop a corporate attitude with respect to ongoing
product innovations. Through such a consciousness, an organisation may remember and learn
from past experiences, and thus enhance the likely success of creative initiatives within the
innovation process. The toolkit will utilise information technology to facilitate its objectives.
6 Creativity Toolkit
The toolkit has been designed to provide organisations with an infrastructure for managing
and enhancing their creative output. It is a customisable portal that allows the knowledge
worker access repositories of knowledge, support tools and communication channels that will
facilitate their creative efforts. The toolkit utilises the power of information technology
applications such as intranets, notice boards and email to achieve its objectives. The
homepage, as seen in figure 2, is the main page the application and allows the user access to
all modules and sub-modules in the application. The content of the page is divided into three
main areas; the logo of the application, the name of the Toolkit and the mission statement and
imaginary organisation name. On the left hand side of the page a ‘Quick Launch’ toolbar is
shown. This toolbar contains hyperlinks to homepage, contact list, schedule and Internet
links. There is also the capacity to search for relevant documents.

The right hand side is divided into two sections. On the top the main menu is displayed. This
menu comprises of four modules: Orientation, Repository, Creativity and Community. This
space is aimed at the entire R&D department. There is the ability in each module to filter the
information so that only the topics relevant to the user appear on screen. Each user can input
creative thoughts and possible product development suggestions, the effective development
of the emerging concepts and secondly as a knowledge repository to facilitate the
development of the concept to an idea for the innovation process.
Figure 2: Toolkit Homepage
6.1 Procedures
The aim of developing a climate is to codify team efforts and build an open and supportive
atmosphere. This module documents the organisational vision, requirements, strategies and
targets that have been defined. This allows individuals understand where the organisation is
striving to get to and thus to align their creative efforts to coincide with the demands of the
organisation. This sub-module consists of a list of departmental procedures and ethics to
enable new team members to understand the approach adopted by the organisation.
Establishing a set of norms, attitudes, and expectations that individuals perceive to operate in
a specific social context develops a team climate. Thus individuals are knowledgeable as to
organisational direction but also have an avenue for having their ‘alternative’ creative acts
considered.
6.2 Tools
This sub-module consists of a collection of tools that are available to the individual to
facilitate the development of idea concepts. These tools include such techniques as
brainstorming, mind mapping, affinity diagrams and cause and effect. The purpose is to
generate ideas, which feed the strict development phase of the innovation process. This area
contains all of the information to develop and links to the tools. The user is free to play with
any of these tools that they feel may facilitate in progressing the concept development. It is
possible to add and edit the items in the tools section, this will enable team members to
enhance to the list with other methods and tools that they may encounter or which may have
proven successful.
6.3 Product Development Problems
This sub-module allows the user to record problems that they have encountered, either within
their concept development or just within their day-to-day environment. The user is allowed to
post this problem to one of their Discussion Groups or else to the ProblemsIssues space for
comment and suggested solutions. Thus, the individual is broadening their network and
attracting individuals of similar interest towards their creative nodes. Thus, over time groups

will tend toward a collective and enhance the creative output through cross-functional
benefits.
6.4 Developing Ideas
This is a module that details the status of the developing ideas and highlights when their time
window has been exceeded. The purpose of this functionality is to remind the user of their
developing ideas within the think tank and to flag up when these ideas are being neglected.
This feature also has inbuilt functionality to send the user a message via email that ideas are
exceeding their time window and require attention. The functionality allows the user extend
the time window but hopefully succeeds in focusing their creative effort without applying too
much negative pressure.
6.5 Contacts
This module allows for access with team members for past projects or on current product
development projects. There are various views available such as my items and Product
Involvement. It is possible through the contacts section of the toolkit to receive notification of
any changes that may occur. The contacts area can be filtered to generate only specific views.
This allows team members to track previous project members to access information. The
contact list can be viewed a project ‘yellow pages’, possible sources of tacit knowledge are at
team members fingertips. One of the issues that the organisations that partook in the case
studies stated was their inability to access past team members quickly. The majority of past
project team members identities are stored in the project budget forms for the purposes of
payment.
6.6 Lessons Learnt
This section of the toolkit allows the user to read and submit lesson learnt while working on
projects. Knowledge is a crucial element of creativity and affects areas of the creative process
such as idea generation. New knowledge is created within an organisation by converting
between the tacit, explicit and cultural knowledge. Thus, through the sharing of tacit and
explicit knowledge with other team members, creativity can be enhanced.
6.7 Discussion Group
This provides a list of all discussion groups ongoing within the department, their area of
interest and their members. Thus an individual can apply to a particular group convenor to
participate in their discussion group. This functionality helps in overcoming organisational
boundaries and ensuring that the individuals comfort zone is constantly being stretch by
alternative perspectives. This functionality also succeeds in widening the individual’s
creative network, which is advantageous for future creative potential. This module allows the
user establish networks of individuals around common themes, with whom they can discuss
issues. This functionality encourages individuals to stretch ‘outside of their comfort zones’
and to avoid ‘concept myopia’ by discussion their thoughts with others. The application of
technologies such as email, notice board and chat rooms overcomes geographical boundaries
and allows creative individuals interact through cyberspace to develop concepts.
7 Conclusion
Innovation is a key-determining factor in the success of modern organisations. As such the
importance of managing individual creativity supported by the acquisition, dissemination and
use of knowledge is a critical factor in the innovation process. The research findings indicate
that innovation is an activity, which is based on the collection, dissemination and
regeneration of information from an assortment of sources, which morphs into a novel viable

idea. The human resources involved in the innovative process are impulsive and perceptive
and therefore have to be motivated and encouraged. The goal of this research was to focus on
the element of creativity involved in new product development process. The aim is improve
the success rate of creativity involved in innovation efforts. The focus of the research
incorporated all aspects of creativity. It analysed the role of the individual, the management
employees and of the innovation process and finally the Research and Development
Departmental Structures. The creativity toolkit software demonstrates the key findings of the
research.
References
Amabile, T. M. (1988). "A model of creativity and innovation in organizations." Research and Organizational
Behavior 10: 123-167
Clarke, L. (1994). The Essence of Change. London, Prentice Hall
Cooper. R.G. and Kleinschmidt. E.J. “Winning Business in Product Development: Critical Success Factor,”
Research Technology Management, July-August 1996, Vol.39 No.4, pp.18-29
Cormican. K and O’Sullivan, D. (2003) A Scorecard for Supporting Enterprise Knowledge Management.
International Journal for Information and Knowledge Management, 2, 3, pp 191-201.
Cummings, J. L. and Teng, B.-S. (2003). "Transferring R&D knowledge: the key factors affecting knowledge
transfer success." Journal of Engineering and Technology Management 20(1-2): 39-68
Davenport, T. H. and Prusak, L. (2000). Working Knowledge: How organisations manage what they know.
Boston, Massachusetts, Harvard Business School Press.
Dougherty, D. (1992). "Interpretive barriers to successful product innovation in large firms." Organization
Science 3: 179–202
Drucker, P.F. (ed) (1998) Harvard Business Review on Knowledge Management, Boston, MA: Harvard
Business School Press
Drucker, P. F. (1993). Innovation and Entrepreneurship: Practice and Principles, Haper business.
Ettlie, J., E. (2000). Managing Technology Innovation. New York, John Wiley & Sons Inc.
Gardner, J.W. (1993). How to prevent organisational dry rot, in Management and Organizational Classics,
M.T. Matteson and J.M. Ivancevich, Editors, Irwin: Boston
Gupta, A.K. and Singhal, A. (1993). Managing Human Resources for Innovation and Creativity, Research
Technology Management. (May-June): p. 41-48
Heath, C, Larrick, R. P., and Klayman, J. Cognitive repairs: How organizational practices can compensate for
individual shortcomings. Research in Organizational Behavior 1–37 (1998).
Lewis, M.W. (1998) Iterative triangulation: A theory development process using existing case studies, Journal
of Operations Management, 16, 455-469
McCutcheon, D.M. and Meredith, J. (1993) Conducting case study research in operations management, Journal
of Operations Management, 11, 239-256
McDonough, E. F., Kahn, K. B. and Braczak, G., (2001). "An investigation of the use of global, virtual, and
collocated new product development teams." The Journal of Product Innovation Management 18: 110-
120.
Sternberg, RJ and Lubart, TI (1999). The concept of creativity: prospects and paradigms. Handbook of
Creativity. R. J. Sternberg. Cambridge, UK: Cambridge University Press
Takeuchi, H. and Nonaka, I. (1986). "The new product development game." Harvard Business Review 64(1):
137-146.
Tidd, J., Bessant, J. and Pavitt, K.., (1997). Managing Innovation:Integrating technological, market and
organizational change. Chichester, John Wiley & Sons Ltd.
West, M. A. and Farr, J. (1990). Innovation and Creativity at Work. Chichester, Wiley.
Wheelwright, S. C. and Clark, KB. (1992). "Creating project plans to focus product development." Harvard
Business Review (March - April): 70-82.
Workman, J.P.J. (1993) Marketing’s limited role in new product development in one computer systems firm.
Journal of Marketing Research, 405-421
Zhuge, H. (2002). "A knowledge flow model for peer-to-peer team knowledge sharing and management."
Expert Systems with Applications 23(1): 23-30

25 creativity toolkit for new product development

More Related Content

What's hot (19)

Similar to 25 creativity toolkit for new product development (20)

More from Jupira Silva (20)

Recently uploaded (20)

25 creativity toolkit for new product development