SlideShare a Scribd company logo
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 795
A generalized metric space and related fixed point theorems
Dr C Vijender
Dept of Mathematics,
Sreenidhi Institute of Sciece and Technology, Hyderabad.
------------------------------------------------------------------***-----------------------------------------------------------------
Abstract:
We introduce a new concept of generalized metric spaces for which we extend some well-known fixed point results including
Banach contraction principle, Ćirić’s fixed point theorem, a fixed point result due to Ran and Reurings, and a fixed point result
due to Nieto and Rodríguez-López. This new concept of generalized metric spaces recover various topological spaces including
standard metric spaces, b-metric spaces, dislocated metric spaces, and modular spaces.
Keywords:generalized metric, b-metric, dislocated metric, modular spacefixed point, partial order.
1. Introduction:
The concept of standard metric spaces is a fundamental tool in topology, functional analysis and nonlinear analysis. This
structure has attracted a considerable attention from mathematicians because of the development of the fixed point theory
in standard metric spaces.
In this work, we present a new generalization of metric spaces that recovers a large class of topological spaces including
standard metric spaces, b-metric spaces, dislocated metric spaces, and modular spaces. In such spaces, we establish new
versions of some known fixed point theorems in standard metric spaces including Banach contraction principle, Ćirić’s fixed
point theorem, a fixed point result due to Ran and Reurings, and a fixed point result due to Nieto and Rodíguez-López.
2. A generalized metric space:
Let X be a nonempty set and D:X×X→[0,+∞] be a given mapping. For every x∈X, let us define the set
C(D,X,x)={{xn}⊂X:limn→∞D(xn,x)=0}.
2.1 General definition
Definition 2.1
We say that D is a generalized metric on X if it satisfies the following conditions:
(D1)for every (x,y)∈X×X, we have
D(x,y)=0⟹x=y;
(D2)for every (x,y)∈X×X, we have
D(x,y)=D(y,x);
(D3)there exists C>0 such that
if (x,y)∈X×X,{xn}∈C(D,X,x),then D(x,y)≤Climn→∞ supD(xn,y).
In this case, we say the pair (X,D) is a generalized metric space.
Remark 2.2
Obviously, if the set C(D,X,x) is empty for every x∈X, then (X,D) is a generalized metric space if and only if (D1) and (D2) are
satisfied.
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 796
Topological concepts
Definition 2.3
Let (X,D) be a generalized metric space. Let {xn} be a sequence in X and x∈X. We say that {xn} D-converges to x if
{xn} ∈C(D,X,x).
Proposition 2.4
Let(X,D)be a generalized metric space. Let{xn} be a sequence inXand(x,y)∈X×X. If{xn} D-converges toxand{xn} D-converges
toy, thenx=y.
Proof
Using the property (D3), we have
D(x,y)≤limn→∞ supD(xn,y)=0,
which implies from the property (D1) that x=y.
Definition 2.5
Let (X,D) be a generalized metric space. Let {xn} be a sequence in X. We say that {xn} is a D-Cauchy sequence if
limm,n→∞D(xn,xn+m)=0.
Definition 2.6
Let (X,D) be a generalized metric space. It is said to be D-complete if every Cauchy sequence in X is convergent to some
element in X.
Standard metric spaces
Recall that a standard metric on a nonempty set X is a mapping d:X×X→[0,+∞)satisfying the following conditions:
(d1)for every (x,y)∈X×X, we have
d(x,y)=0⟺x=y;
(d2)for every (x,y)∈X×X, we have
d(x,y)=d(y,x);
(d3)for every (x,y,z)∈X×X×X, we have
d(x,y)≤d(x,z)+d(z,y).
It is not difficult to observe that d satisfies all the conditions (D1)-(D3) with C=1.
b-Metric spaces
In 1993, Czerwik [1] introduced the concept of b-metric spaces by relaxing the triangle inequality as follows.
Definition 2.7
Let X be a nonempty set and d:X×X→[0,+∞) be a given mapping. We say that d is a b-metric on X if it satisfies the following
conditions:
(b1)for every (x,y)∈X×X, we have
d(x,y)=0⟺x=y;
(b2)for every (x,y)∈X×X, we have
d(x,y)=d(y,x);
(b3)there exists s≥1 such that, for every (x,y,z)∈X×X×X, we have
d(x,y)≤s[d(x,z)+d(z,y)].
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 797
In this case, (X,d) is said to be a b-metric space.
The concept of convergence in such spaces is similar to that of standard metric spaces.
Proposition 2.8
Anyb-metric onXis a generalized metric onX.
Proof
Let d be a b-metric on X. We have just to proof that d satisfies the property (D3). Let x∈X and {xn} }∈C(d,X,x). For every y∈X,
by the property (b3), we have
d(x,y)≤sd(x,xn)+sd(xn,y),for every natural number n. Thus we have
d(x,y)≤slimn→∞ supd(xn,y).
The property (D3) is then satisfied with C=s.
Hitzler-Seda metric spaces
Hitzler and Seda [8] introduced the notion of dislocated metric spaces as follows.
Definition 2.9
Let X be a nonempty set and d:X×X→[0,+∞) be a given mapping. We say that d is a dislocated metric on X if it satisfies the
following conditions:
(HS1)for every (x,y)∈X×X, we have
d(x,y)=0⟹x=y;
(HS2)for every (x,y)∈X×X, we have
d(x,y)=d(y,x);
(HS3)for every (x,y,z)∈X×X×X, we have
d(x,y)≤d(x,z)+d(z,y).
In this case, (X,d) is said to be a dislocated metric space.
The motivation of defining this new notion is to get better results in logic programming semantics.
The concept of convergence in such spaces is similar to that of standard metric spaces.
The following result can easily be established, so we omit its proof.
Proposition 2.10
Any dislocated metric onXis a generalized metric onX.
Modular spaces with the Fatou property
Definition 2.11
Let X be a linear space over R. A functional ρ:X→[0,+∞] is said to be modular if the following conditions hold:
(ρ1)for every x∈X, we have
ρ(x)=0⟺x=0;
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 798
(ρ2)for every x∈X, we have
ρ(−x)=ρ(x);
(ρ3)for every (x,y)∈X×X, we have
ρ(αx+βy)≤ρ(x)+ρ(y),
whenever α, β≥0, and α+β=1.
Definition 2.12
If ρ is a modular on X, then the set
Xρ={x∈X:limλ→0ρ(λx)=0}
is called a modular space.
The concept of convergence in such spaces is defined as follows.
Definition 2.13
Let (X,ρ) be a modular space.
1. (i)A sequence {xn}n∈N⊂Xρ is said to be ρ-convergent to x∈Xρ if limn→∞ρ(xn−x)=0.
2. (ii)A sequence {xn}n∈N⊂Xρ is said to be ρ-Cauchy if limn,m→∞ρ(xn−xn+m)=0.
3. (iii)Xρ is said to be ρ-complete if any ρ-Cauchy sequence is ρ-convergent.
Definition 2.14
The modular ρ has the Fatou property if, for every y∈Xρ, we have
ρ(x−y)≤lim n→∞infρ(xn−y),
whenever {xn}n∈N⊂Xρ is ρ-convergent to x∈Xρ.
Let (X,ρ) be a modular space. Define the mapping Dρ:Xρ×Xρ→[0,+∞] by
Dρ(x,y)=ρ(x−y),for every (x,y)∈X×X.
We have the following result.
Proposition 2.15
Ifρhas the Fatou property, thenDρis a generalized metric onXρ.
Proof
We have just to proof that Dρ satisfies the property (D3). Let x∈Xρ and {xn}∈C(Dρ,Xρ,x), which means that
limn→∞ρ(xn−x)=0.
Using the Fatou property, for all y∈Xρ, we have
ρ(x−y)≤limn→∞ infρ(xn−y),
which yields
Dρ(x,y)≤lim n→∞infDρ(xn,y)≤lim n→∞supDρ(xn,y).
Then (D3) is satisfied with C=1 and Dρ is a generalized metric on Xρ.
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 799
The following result is immediate.
We have the following extension of the Banach contraction principle.
3. MAIN RESULT:
The Banach contraction principle in a generalized metric space:
In this section, we present an extension of the Banach contraction principle to the setting of generalized metric spaces
introduced previously.
Let (X,D) be a generalized metric space and f:X→X be a mapping.
Definition 3.1
Let k∈(0,1). We say that f is a k-contraction if
D(f(x),f(y))≤kD(x,y),for every (x,y)∈X×X.
First, we have the following observation.
Proposition 3.2
Suppose that f is a k-contraction for some k∈(0,1). Then any fixed point ω∈X of f satisfies
D(ω,ω)<∞⟹D(ω,ω)=0.
Proof
Let ω∈X be a fixed point of f such that D(ω,ω)<∞. Since f is a k-contraction, we have
D(ω,ω)=D(f(ω),f(ω))≤kD(ω,ω),
which implies that D(ω,ω)=0 since k∈(0,1) and D(ω,ω)<∞.
For everyx∈X, let
δ(D,f,x)=sup{D(fi(x),fj(x)):i,j∈N}.
We have the following extension of the Banach contraction principle.
Theorem 3.3
Suppose that the following conditions hold:
(i) (X,D)is complete;
(ii) f is ak-contraction for somek∈(0,1);
(iii) there existsx0∈Xsuch thatδ(D,f,x0)<∞.
Then{fn(x0)}converges toω∈X, a fixed point off. Moreover, ifω′∈Xis another fixed point offsuch thatD(ω,ω′)<∞, thenω=ω′.
Proof
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 800
Let n∈N (n≥1). Since f is a k-contraction, for all i,j∈N, we have
D(fn+i(x0),fn+j(x0))≤kD(fn−1+i(x0),fn−1+j(x0)),
which implies that
δ(D,f,fn(x0))≤kδ(D,f,fn−1(x0)).
Then, for every n∈N, we have
δ(D,f,fn(x0))≤knδ(D,f,x0).
Using the above inequality, for every n,m∈N, we have
D(fn(x0),fn+m(x0))≤δ(D,f,fn(x0))≤knδ(D,f,x0).
Since δ(D,f,x0)<∞and k∈(0,1), we obtain
limn,m→∞D(fn(x0),fn+m(x0))=0,
which implies that {fn(x0)} is a D-Cauchy sequence.
Since (X,D) is D-complete, there exists some ω∈X such that {fn(x0)} is D-convergent to ω.
On the other hand, since f is a k-contraction, for all n∈N, we have
D(fn+1(x0),f(ω))≤kD(fn(x0),ω).
Letting n→∞ in the above inequality, we get
limn→∞D(fn+1(x0),f(ω))=0.
Then {fn(x0)} is D-convergent to f(ω). By the uniqueness of the limit (see Proposition 2.4), we get ω=f(ω), that is, ω is a fixed
point of f.
Now, suppose that ω′∈X is a fixed point of f such that D(ω,ω′)<∞. Since f is a k-contraction, we have
D(ω,ω′)=D(f(ω),f(ω′))≤kD(ω,ω′),
which implies by the property (D1) that ω=ω′.
Observe that we can replace condition (iii) in Theorem 3.3 by(iii)′
there exists x0∈X such that sup{D(x0,fr(x0)):r∈N}<∞.
In fact, since f is a k-contraction, we obtain easily that
δ(D,f,x0)≤sup{D(x0,fr(x0)):r∈N}.
So condition (iii)′ implies condition (iii).
The following result (see Kirk and Shahzad [6]) is an immediate consequence of Proposition 2.8and Theorem 3.3.
Corollary 3.4
Let(X,d)be a completeb-metric space andf:X→X be a mapping. Suppose that for somek∈(0,1), we have
d(f(x),f(y))≤kd(x,y),for every (x,y)∈X×X.
If there existsx0∈Xsuch that
sup{d(fi(x0),fj(x0)):i,j∈N}<∞,
then the sequence{fn(x0)}converges to a fixed point off. Moreover, fhas one and only one fixed point.
Note that in [1], there is a better result than this given by Corollary 3.4.
The next result is an immediate consequence of Proposition 2.10 and Theorem 3.3.
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072
© 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 801
Corollary 3.5
Let(X,d)be a complete dislocated metric space andf:X→Xbe a mapping. Suppose that for somek∈(0,1), we have
d(f(x),f(y))≤kd(x,y),for every (x,y)∈X×X.
If there existsx0∈Xsuch that
sup{d(fi(x0),fj(x0)):i,j∈N}<∞,
then the sequence{fn(x0)}converges to a fixed point off. Moreover, fhas one and only one fixed point.
The following result is an immediate consequence of Proposition 2.15, and Theorem 3.3.
Corollary 3.6
Let(Xρ,ρ)be a complete modular space andf:X→Xbe a mapping. Suppose that for somek∈(0,1), we have
ρ(f(x)−f(y))≤kρ(x−y),for every (x,y)∈Xρ×Xρ.
Suppose also thatρsatisfies the Fatou property. If there exists0∈Xρsuch that
sup{ρ(fi(x0)−fj(x0)):i,j∈N}<∞,
then the sequence{fn(x0)}ρ-converges to someω∈Xρ, a fixed point off. Moreover, ifω′∈Xρis another fixed point offsuch
thatρ(ω−ω′)<∞, thenω=ω′.
References:
1.Czerwik, S: Contraction mappings in b-metric spaces. Acta Math. Inform. Univ. Ostrav. 1, 5-11 (1993)
2.Akkouchi, M: Common fixed point theorems for two self-mappings of a b-metric space under an implicit relation. Hacet. J.
Math. Stat. 40(6), 805-810 (2011)
3.Berinde, V: Sequences of operators and fixed points in quasimetric spaces. Stud. Univ. Babeş-Bolyai, Math. 41, 23-27 (1996)
4.Boriceanu, M, Bota, M, Petrusel, A: Multivalued fractals in b-metric spaces. Cent. Eur. J. Math. 8(2), 367-377 (2010)
5.Czerwik, S, Dlutek, K, Singh, SL: Round-off stability of iteration procedures for set-valued operators in b-metric spaces. J.
Natur. Phys. Sci. 11, 87-94 (2007)
6.Kirk, W, Shahzad, N: b-Metric spaces. In: Fixed Point Theory in Distance Spaces, pp. 113-131. Springer, Berlin (2014)
7.Popovic, B, Radenovic, S, Shukla, S: Fixed point results to tvs-cone b-metric spaces. Gulf J. Math. 1, 51-64 (2013)8.
8. Hitzler, P, Seda, AK: Dislocated topologies. J. Electr. Eng. 51(12), 3-7 (2000)9.
9. Aage, CT, Salunke, JN: The results on fixed points in dislocated and dislocated quasi-metric space. Appl. Math. Sci. 2(59),
2941-2948 (2008)
10.Ahamad, MA, Zeyada, FM, Hasan, GF: Fixed point theorems in generalized types of dislocated metric spaces and its
applications. Thai J. Math. 11, 67-73 (2013)

More Related Content

PDF
The Kernel Trick
PDF
Coincidence points for mappings under generalized contraction
PDF
Lecture 2: linear SVM in the Dual
PPT
1574 multiple integral
PDF
Lesson 19: Double Integrals over General Regions
PDF
Caims 2009
PDF
Lesson18 Double Integrals Over Rectangles Slides
PDF
11.on generalized dislocated quasi metrics
The Kernel Trick
Coincidence points for mappings under generalized contraction
Lecture 2: linear SVM in the Dual
1574 multiple integral
Lesson 19: Double Integrals over General Regions
Caims 2009
Lesson18 Double Integrals Over Rectangles Slides
11.on generalized dislocated quasi metrics

What's hot (20)

PDF
On generalized dislocated quasi metrics
PDF
Lecture6 svdd
PDF
Kernels and Support Vector Machines
PPTX
Applied Calculus Chapter 4 multiple integrals
 
PDF
Hierarchical matrices for approximating large covariance matries and computin...
PPT
DOUBLE INTEGRALS PPT GTU CALCULUS (2110014)
PDF
Fixed Point Theorems for Weak K-Quasi Contractions on a Generalized Metric Sp...
PDF
Double integration
PDF
somenath_fixedpoint_dasguptaIMF17-20-2013
PDF
QMC Error SAMSI Tutorial Aug 2017
PDF
Metric Embeddings and Expanders
PDF
Crib Sheet AP Calculus AB and BC exams
PDF
A common fixed point theorem in cone metric spaces
PDF
Conformable Chebyshev differential equation of first kind
PDF
Program on Quasi-Monte Carlo and High-Dimensional Sampling Methods for Applie...
PDF
Third-kind Chebyshev Polynomials Vr(x) in Collocation Methods of Solving Boun...
PDF
A Study on Intuitionistic Multi-Anti Fuzzy Subgroups
PDF
SOLVING BVPs OF SINGULARLY PERTURBED DISCRETE SYSTEMS
PDF
(α ψ)- Construction with q- function for coupled fixed point
PDF
Minimum mean square error estimation and approximation of the Bayesian update
On generalized dislocated quasi metrics
Lecture6 svdd
Kernels and Support Vector Machines
Applied Calculus Chapter 4 multiple integrals
 
Hierarchical matrices for approximating large covariance matries and computin...
DOUBLE INTEGRALS PPT GTU CALCULUS (2110014)
Fixed Point Theorems for Weak K-Quasi Contractions on a Generalized Metric Sp...
Double integration
somenath_fixedpoint_dasguptaIMF17-20-2013
QMC Error SAMSI Tutorial Aug 2017
Metric Embeddings and Expanders
Crib Sheet AP Calculus AB and BC exams
A common fixed point theorem in cone metric spaces
Conformable Chebyshev differential equation of first kind
Program on Quasi-Monte Carlo and High-Dimensional Sampling Methods for Applie...
Third-kind Chebyshev Polynomials Vr(x) in Collocation Methods of Solving Boun...
A Study on Intuitionistic Multi-Anti Fuzzy Subgroups
SOLVING BVPs OF SINGULARLY PERTURBED DISCRETE SYSTEMS
(α ψ)- Construction with q- function for coupled fixed point
Minimum mean square error estimation and approximation of the Bayesian update
Ad

Similar to A Generalized Metric Space and Related Fixed Point Theorems (20)

PDF
Some fixed point theorems of expansion mapping in g-metric spaces
PDF
Some Fixed Point Theorems of Expansion Mapping In G-Metric Spaces
DOCX
2. Prasad_Komal JNU2015 (1)
PDF
ON SOME FIXED POINT RESULTS IN GENERALIZED METRIC SPACE WITH SELF MAPPINGS UN...
PDF
Stability criterion of periodic oscillations in a (14)
PDF
International Journal of Computational Engineering Research(IJCER)
PDF
Some Fixed Point Theorems in b G -cone Metric Space
PDF
A common fixed point of integral type contraction in generalized metric spacess
PDF
A unique common fixed point theorems in generalized d
PDF
A unique common fixed point theorems in generalized d
PDF
Contribution of Fixed Point Theorem in Quasi Metric Spaces
PDF
TOPOLOGY 541Let M be a set with two members a and b. Define the fu.pdf
PDF
8 fixed point theorem in complete fuzzy metric space 8 megha shrivastava
PDF
Some common Fixed Point Theorems for compatible  - contractions in G-metric ...
PDF
Generalized fixed point theorems for compatible mapping in fuzzy 3 metric spa...
PDF
Fixed Point Results for Weakly Compatible Mappings in Convex G-Metric Space
PDF
metric spaces
PDF
Generalized fixed point theorems for compatible mapping in fuzzy 2 metric spa...
PDF
The existence of common fixed point theorems of generalized contractive mappi...
PDF
Some Common Fixed Point Results for Expansive Mappings in a Cone Metric Space
Some fixed point theorems of expansion mapping in g-metric spaces
Some Fixed Point Theorems of Expansion Mapping In G-Metric Spaces
2. Prasad_Komal JNU2015 (1)
ON SOME FIXED POINT RESULTS IN GENERALIZED METRIC SPACE WITH SELF MAPPINGS UN...
Stability criterion of periodic oscillations in a (14)
International Journal of Computational Engineering Research(IJCER)
Some Fixed Point Theorems in b G -cone Metric Space
A common fixed point of integral type contraction in generalized metric spacess
A unique common fixed point theorems in generalized d
A unique common fixed point theorems in generalized d
Contribution of Fixed Point Theorem in Quasi Metric Spaces
TOPOLOGY 541Let M be a set with two members a and b. Define the fu.pdf
8 fixed point theorem in complete fuzzy metric space 8 megha shrivastava
Some common Fixed Point Theorems for compatible  - contractions in G-metric ...
Generalized fixed point theorems for compatible mapping in fuzzy 3 metric spa...
Fixed Point Results for Weakly Compatible Mappings in Convex G-Metric Space
metric spaces
Generalized fixed point theorems for compatible mapping in fuzzy 2 metric spa...
The existence of common fixed point theorems of generalized contractive mappi...
Some Common Fixed Point Results for Expansive Mappings in a Cone Metric Space
Ad

More from IRJET Journal (20)

PDF
Enhanced heart disease prediction using SKNDGR ensemble Machine Learning Model
PDF
Utilizing Biomedical Waste for Sustainable Brick Manufacturing: A Novel Appro...
PDF
Kiona – A Smart Society Automation Project
PDF
DESIGN AND DEVELOPMENT OF BATTERY THERMAL MANAGEMENT SYSTEM USING PHASE CHANG...
PDF
Invest in Innovation: Empowering Ideas through Blockchain Based Crowdfunding
PDF
SPACE WATCH YOUR REAL-TIME SPACE INFORMATION HUB
PDF
A Review on Influence of Fluid Viscous Damper on The Behaviour of Multi-store...
PDF
Wireless Arduino Control via Mobile: Eliminating the Need for a Dedicated Wir...
PDF
Explainable AI(XAI) using LIME and Disease Detection in Mango Leaf by Transfe...
PDF
BRAIN TUMOUR DETECTION AND CLASSIFICATION
PDF
The Project Manager as an ambassador of the contract. The case of NEC4 ECC co...
PDF
"Enhanced Heat Transfer Performance in Shell and Tube Heat Exchangers: A CFD ...
PDF
Advancements in CFD Analysis of Shell and Tube Heat Exchangers with Nanofluid...
PDF
Breast Cancer Detection using Computer Vision
PDF
Auto-Charging E-Vehicle with its battery Management.
PDF
Analysis of high energy charge particle in the Heliosphere
PDF
A Novel System for Recommending Agricultural Crops Using Machine Learning App...
PDF
Auto-Charging E-Vehicle with its battery Management.
PDF
Analysis of high energy charge particle in the Heliosphere
PDF
Wireless Arduino Control via Mobile: Eliminating the Need for a Dedicated Wir...
Enhanced heart disease prediction using SKNDGR ensemble Machine Learning Model
Utilizing Biomedical Waste for Sustainable Brick Manufacturing: A Novel Appro...
Kiona – A Smart Society Automation Project
DESIGN AND DEVELOPMENT OF BATTERY THERMAL MANAGEMENT SYSTEM USING PHASE CHANG...
Invest in Innovation: Empowering Ideas through Blockchain Based Crowdfunding
SPACE WATCH YOUR REAL-TIME SPACE INFORMATION HUB
A Review on Influence of Fluid Viscous Damper on The Behaviour of Multi-store...
Wireless Arduino Control via Mobile: Eliminating the Need for a Dedicated Wir...
Explainable AI(XAI) using LIME and Disease Detection in Mango Leaf by Transfe...
BRAIN TUMOUR DETECTION AND CLASSIFICATION
The Project Manager as an ambassador of the contract. The case of NEC4 ECC co...
"Enhanced Heat Transfer Performance in Shell and Tube Heat Exchangers: A CFD ...
Advancements in CFD Analysis of Shell and Tube Heat Exchangers with Nanofluid...
Breast Cancer Detection using Computer Vision
Auto-Charging E-Vehicle with its battery Management.
Analysis of high energy charge particle in the Heliosphere
A Novel System for Recommending Agricultural Crops Using Machine Learning App...
Auto-Charging E-Vehicle with its battery Management.
Analysis of high energy charge particle in the Heliosphere
Wireless Arduino Control via Mobile: Eliminating the Need for a Dedicated Wir...

Recently uploaded (20)

PPTX
Lecture Notes Electrical Wiring System Components
PDF
composite construction of structures.pdf
PPTX
UNIT-1 - COAL BASED THERMAL POWER PLANTS
PDF
Mohammad Mahdi Farshadian CV - Prospective PhD Student 2026
PPTX
KTU 2019 -S7-MCN 401 MODULE 2-VINAY.pptx
PPTX
CYBER-CRIMES AND SECURITY A guide to understanding
PPTX
Infosys Presentation by1.Riyan Bagwan 2.Samadhan Naiknavare 3.Gaurav Shinde 4...
PDF
Evaluating the Democratization of the Turkish Armed Forces from a Normative P...
PDF
BMEC211 - INTRODUCTION TO MECHATRONICS-1.pdf
PPTX
web development for engineering and engineering
PPTX
additive manufacturing of ss316l using mig welding
PPTX
OOP with Java - Java Introduction (Basics)
PDF
R24 SURVEYING LAB MANUAL for civil enggi
PDF
PPT on Performance Review to get promotions
DOCX
ASol_English-Language-Literature-Set-1-27-02-2023-converted.docx
PDF
July 2025 - Top 10 Read Articles in International Journal of Software Enginee...
PDF
Digital Logic Computer Design lecture notes
DOCX
573137875-Attendance-Management-System-original
PPTX
IOT PPTs Week 10 Lecture Material.pptx of NPTEL Smart Cities contd
PDF
Automation-in-Manufacturing-Chapter-Introduction.pdf
Lecture Notes Electrical Wiring System Components
composite construction of structures.pdf
UNIT-1 - COAL BASED THERMAL POWER PLANTS
Mohammad Mahdi Farshadian CV - Prospective PhD Student 2026
KTU 2019 -S7-MCN 401 MODULE 2-VINAY.pptx
CYBER-CRIMES AND SECURITY A guide to understanding
Infosys Presentation by1.Riyan Bagwan 2.Samadhan Naiknavare 3.Gaurav Shinde 4...
Evaluating the Democratization of the Turkish Armed Forces from a Normative P...
BMEC211 - INTRODUCTION TO MECHATRONICS-1.pdf
web development for engineering and engineering
additive manufacturing of ss316l using mig welding
OOP with Java - Java Introduction (Basics)
R24 SURVEYING LAB MANUAL for civil enggi
PPT on Performance Review to get promotions
ASol_English-Language-Literature-Set-1-27-02-2023-converted.docx
July 2025 - Top 10 Read Articles in International Journal of Software Enginee...
Digital Logic Computer Design lecture notes
573137875-Attendance-Management-System-original
IOT PPTs Week 10 Lecture Material.pptx of NPTEL Smart Cities contd
Automation-in-Manufacturing-Chapter-Introduction.pdf

A Generalized Metric Space and Related Fixed Point Theorems

  • 1. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072 © 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 795 A generalized metric space and related fixed point theorems Dr C Vijender Dept of Mathematics, Sreenidhi Institute of Sciece and Technology, Hyderabad. ------------------------------------------------------------------***----------------------------------------------------------------- Abstract: We introduce a new concept of generalized metric spaces for which we extend some well-known fixed point results including Banach contraction principle, Ćirić’s fixed point theorem, a fixed point result due to Ran and Reurings, and a fixed point result due to Nieto and Rodríguez-López. This new concept of generalized metric spaces recover various topological spaces including standard metric spaces, b-metric spaces, dislocated metric spaces, and modular spaces. Keywords:generalized metric, b-metric, dislocated metric, modular spacefixed point, partial order. 1. Introduction: The concept of standard metric spaces is a fundamental tool in topology, functional analysis and nonlinear analysis. This structure has attracted a considerable attention from mathematicians because of the development of the fixed point theory in standard metric spaces. In this work, we present a new generalization of metric spaces that recovers a large class of topological spaces including standard metric spaces, b-metric spaces, dislocated metric spaces, and modular spaces. In such spaces, we establish new versions of some known fixed point theorems in standard metric spaces including Banach contraction principle, Ćirić’s fixed point theorem, a fixed point result due to Ran and Reurings, and a fixed point result due to Nieto and Rodíguez-López. 2. A generalized metric space: Let X be a nonempty set and D:X×X→[0,+∞] be a given mapping. For every x∈X, let us define the set C(D,X,x)={{xn}⊂X:limn→∞D(xn,x)=0}. 2.1 General definition Definition 2.1 We say that D is a generalized metric on X if it satisfies the following conditions: (D1)for every (x,y)∈X×X, we have D(x,y)=0⟹x=y; (D2)for every (x,y)∈X×X, we have D(x,y)=D(y,x); (D3)there exists C>0 such that if (x,y)∈X×X,{xn}∈C(D,X,x),then D(x,y)≤Climn→∞ supD(xn,y). In this case, we say the pair (X,D) is a generalized metric space. Remark 2.2 Obviously, if the set C(D,X,x) is empty for every x∈X, then (X,D) is a generalized metric space if and only if (D1) and (D2) are satisfied.
  • 2. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072 © 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 796 Topological concepts Definition 2.3 Let (X,D) be a generalized metric space. Let {xn} be a sequence in X and x∈X. We say that {xn} D-converges to x if {xn} ∈C(D,X,x). Proposition 2.4 Let(X,D)be a generalized metric space. Let{xn} be a sequence inXand(x,y)∈X×X. If{xn} D-converges toxand{xn} D-converges toy, thenx=y. Proof Using the property (D3), we have D(x,y)≤limn→∞ supD(xn,y)=0, which implies from the property (D1) that x=y. Definition 2.5 Let (X,D) be a generalized metric space. Let {xn} be a sequence in X. We say that {xn} is a D-Cauchy sequence if limm,n→∞D(xn,xn+m)=0. Definition 2.6 Let (X,D) be a generalized metric space. It is said to be D-complete if every Cauchy sequence in X is convergent to some element in X. Standard metric spaces Recall that a standard metric on a nonempty set X is a mapping d:X×X→[0,+∞)satisfying the following conditions: (d1)for every (x,y)∈X×X, we have d(x,y)=0⟺x=y; (d2)for every (x,y)∈X×X, we have d(x,y)=d(y,x); (d3)for every (x,y,z)∈X×X×X, we have d(x,y)≤d(x,z)+d(z,y). It is not difficult to observe that d satisfies all the conditions (D1)-(D3) with C=1. b-Metric spaces In 1993, Czerwik [1] introduced the concept of b-metric spaces by relaxing the triangle inequality as follows. Definition 2.7 Let X be a nonempty set and d:X×X→[0,+∞) be a given mapping. We say that d is a b-metric on X if it satisfies the following conditions: (b1)for every (x,y)∈X×X, we have d(x,y)=0⟺x=y; (b2)for every (x,y)∈X×X, we have d(x,y)=d(y,x); (b3)there exists s≥1 such that, for every (x,y,z)∈X×X×X, we have d(x,y)≤s[d(x,z)+d(z,y)].
  • 3. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072 © 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 797 In this case, (X,d) is said to be a b-metric space. The concept of convergence in such spaces is similar to that of standard metric spaces. Proposition 2.8 Anyb-metric onXis a generalized metric onX. Proof Let d be a b-metric on X. We have just to proof that d satisfies the property (D3). Let x∈X and {xn} }∈C(d,X,x). For every y∈X, by the property (b3), we have d(x,y)≤sd(x,xn)+sd(xn,y),for every natural number n. Thus we have d(x,y)≤slimn→∞ supd(xn,y). The property (D3) is then satisfied with C=s. Hitzler-Seda metric spaces Hitzler and Seda [8] introduced the notion of dislocated metric spaces as follows. Definition 2.9 Let X be a nonempty set and d:X×X→[0,+∞) be a given mapping. We say that d is a dislocated metric on X if it satisfies the following conditions: (HS1)for every (x,y)∈X×X, we have d(x,y)=0⟹x=y; (HS2)for every (x,y)∈X×X, we have d(x,y)=d(y,x); (HS3)for every (x,y,z)∈X×X×X, we have d(x,y)≤d(x,z)+d(z,y). In this case, (X,d) is said to be a dislocated metric space. The motivation of defining this new notion is to get better results in logic programming semantics. The concept of convergence in such spaces is similar to that of standard metric spaces. The following result can easily be established, so we omit its proof. Proposition 2.10 Any dislocated metric onXis a generalized metric onX. Modular spaces with the Fatou property Definition 2.11 Let X be a linear space over R. A functional ρ:X→[0,+∞] is said to be modular if the following conditions hold: (ρ1)for every x∈X, we have ρ(x)=0⟺x=0;
  • 4. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072 © 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 798 (ρ2)for every x∈X, we have ρ(−x)=ρ(x); (ρ3)for every (x,y)∈X×X, we have ρ(αx+βy)≤ρ(x)+ρ(y), whenever α, β≥0, and α+β=1. Definition 2.12 If ρ is a modular on X, then the set Xρ={x∈X:limλ→0ρ(λx)=0} is called a modular space. The concept of convergence in such spaces is defined as follows. Definition 2.13 Let (X,ρ) be a modular space. 1. (i)A sequence {xn}n∈N⊂Xρ is said to be ρ-convergent to x∈Xρ if limn→∞ρ(xn−x)=0. 2. (ii)A sequence {xn}n∈N⊂Xρ is said to be ρ-Cauchy if limn,m→∞ρ(xn−xn+m)=0. 3. (iii)Xρ is said to be ρ-complete if any ρ-Cauchy sequence is ρ-convergent. Definition 2.14 The modular ρ has the Fatou property if, for every y∈Xρ, we have ρ(x−y)≤lim n→∞infρ(xn−y), whenever {xn}n∈N⊂Xρ is ρ-convergent to x∈Xρ. Let (X,ρ) be a modular space. Define the mapping Dρ:Xρ×Xρ→[0,+∞] by Dρ(x,y)=ρ(x−y),for every (x,y)∈X×X. We have the following result. Proposition 2.15 Ifρhas the Fatou property, thenDρis a generalized metric onXρ. Proof We have just to proof that Dρ satisfies the property (D3). Let x∈Xρ and {xn}∈C(Dρ,Xρ,x), which means that limn→∞ρ(xn−x)=0. Using the Fatou property, for all y∈Xρ, we have ρ(x−y)≤limn→∞ infρ(xn−y), which yields Dρ(x,y)≤lim n→∞infDρ(xn,y)≤lim n→∞supDρ(xn,y). Then (D3) is satisfied with C=1 and Dρ is a generalized metric on Xρ.
  • 5. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072 © 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 799 The following result is immediate. We have the following extension of the Banach contraction principle. 3. MAIN RESULT: The Banach contraction principle in a generalized metric space: In this section, we present an extension of the Banach contraction principle to the setting of generalized metric spaces introduced previously. Let (X,D) be a generalized metric space and f:X→X be a mapping. Definition 3.1 Let k∈(0,1). We say that f is a k-contraction if D(f(x),f(y))≤kD(x,y),for every (x,y)∈X×X. First, we have the following observation. Proposition 3.2 Suppose that f is a k-contraction for some k∈(0,1). Then any fixed point ω∈X of f satisfies D(ω,ω)<∞⟹D(ω,ω)=0. Proof Let ω∈X be a fixed point of f such that D(ω,ω)<∞. Since f is a k-contraction, we have D(ω,ω)=D(f(ω),f(ω))≤kD(ω,ω), which implies that D(ω,ω)=0 since k∈(0,1) and D(ω,ω)<∞. For everyx∈X, let δ(D,f,x)=sup{D(fi(x),fj(x)):i,j∈N}. We have the following extension of the Banach contraction principle. Theorem 3.3 Suppose that the following conditions hold: (i) (X,D)is complete; (ii) f is ak-contraction for somek∈(0,1); (iii) there existsx0∈Xsuch thatδ(D,f,x0)<∞. Then{fn(x0)}converges toω∈X, a fixed point off. Moreover, ifω′∈Xis another fixed point offsuch thatD(ω,ω′)<∞, thenω=ω′. Proof
  • 6. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072 © 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 800 Let n∈N (n≥1). Since f is a k-contraction, for all i,j∈N, we have D(fn+i(x0),fn+j(x0))≤kD(fn−1+i(x0),fn−1+j(x0)), which implies that δ(D,f,fn(x0))≤kδ(D,f,fn−1(x0)). Then, for every n∈N, we have δ(D,f,fn(x0))≤knδ(D,f,x0). Using the above inequality, for every n,m∈N, we have D(fn(x0),fn+m(x0))≤δ(D,f,fn(x0))≤knδ(D,f,x0). Since δ(D,f,x0)<∞and k∈(0,1), we obtain limn,m→∞D(fn(x0),fn+m(x0))=0, which implies that {fn(x0)} is a D-Cauchy sequence. Since (X,D) is D-complete, there exists some ω∈X such that {fn(x0)} is D-convergent to ω. On the other hand, since f is a k-contraction, for all n∈N, we have D(fn+1(x0),f(ω))≤kD(fn(x0),ω). Letting n→∞ in the above inequality, we get limn→∞D(fn+1(x0),f(ω))=0. Then {fn(x0)} is D-convergent to f(ω). By the uniqueness of the limit (see Proposition 2.4), we get ω=f(ω), that is, ω is a fixed point of f. Now, suppose that ω′∈X is a fixed point of f such that D(ω,ω′)<∞. Since f is a k-contraction, we have D(ω,ω′)=D(f(ω),f(ω′))≤kD(ω,ω′), which implies by the property (D1) that ω=ω′. Observe that we can replace condition (iii) in Theorem 3.3 by(iii)′ there exists x0∈X such that sup{D(x0,fr(x0)):r∈N}<∞. In fact, since f is a k-contraction, we obtain easily that δ(D,f,x0)≤sup{D(x0,fr(x0)):r∈N}. So condition (iii)′ implies condition (iii). The following result (see Kirk and Shahzad [6]) is an immediate consequence of Proposition 2.8and Theorem 3.3. Corollary 3.4 Let(X,d)be a completeb-metric space andf:X→X be a mapping. Suppose that for somek∈(0,1), we have d(f(x),f(y))≤kd(x,y),for every (x,y)∈X×X. If there existsx0∈Xsuch that sup{d(fi(x0),fj(x0)):i,j∈N}<∞, then the sequence{fn(x0)}converges to a fixed point off. Moreover, fhas one and only one fixed point. Note that in [1], there is a better result than this given by Corollary 3.4. The next result is an immediate consequence of Proposition 2.10 and Theorem 3.3.
  • 7. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 04 Issue: 07 | July -2017 www.irjet.net p-ISSN: 2395-0072 © 2017, IRJET | Impact Factor value: 5.181 | ISO 9001:2008 Certified Journal | Page 801 Corollary 3.5 Let(X,d)be a complete dislocated metric space andf:X→Xbe a mapping. Suppose that for somek∈(0,1), we have d(f(x),f(y))≤kd(x,y),for every (x,y)∈X×X. If there existsx0∈Xsuch that sup{d(fi(x0),fj(x0)):i,j∈N}<∞, then the sequence{fn(x0)}converges to a fixed point off. Moreover, fhas one and only one fixed point. The following result is an immediate consequence of Proposition 2.15, and Theorem 3.3. Corollary 3.6 Let(Xρ,ρ)be a complete modular space andf:X→Xbe a mapping. Suppose that for somek∈(0,1), we have ρ(f(x)−f(y))≤kρ(x−y),for every (x,y)∈Xρ×Xρ. Suppose also thatρsatisfies the Fatou property. If there exists0∈Xρsuch that sup{ρ(fi(x0)−fj(x0)):i,j∈N}<∞, then the sequence{fn(x0)}ρ-converges to someω∈Xρ, a fixed point off. Moreover, ifω′∈Xρis another fixed point offsuch thatρ(ω−ω′)<∞, thenω=ω′. References: 1.Czerwik, S: Contraction mappings in b-metric spaces. Acta Math. Inform. Univ. Ostrav. 1, 5-11 (1993) 2.Akkouchi, M: Common fixed point theorems for two self-mappings of a b-metric space under an implicit relation. Hacet. J. Math. Stat. 40(6), 805-810 (2011) 3.Berinde, V: Sequences of operators and fixed points in quasimetric spaces. Stud. Univ. Babeş-Bolyai, Math. 41, 23-27 (1996) 4.Boriceanu, M, Bota, M, Petrusel, A: Multivalued fractals in b-metric spaces. Cent. Eur. J. Math. 8(2), 367-377 (2010) 5.Czerwik, S, Dlutek, K, Singh, SL: Round-off stability of iteration procedures for set-valued operators in b-metric spaces. J. Natur. Phys. Sci. 11, 87-94 (2007) 6.Kirk, W, Shahzad, N: b-Metric spaces. In: Fixed Point Theory in Distance Spaces, pp. 113-131. Springer, Berlin (2014) 7.Popovic, B, Radenovic, S, Shukla, S: Fixed point results to tvs-cone b-metric spaces. Gulf J. Math. 1, 51-64 (2013)8. 8. Hitzler, P, Seda, AK: Dislocated topologies. J. Electr. Eng. 51(12), 3-7 (2000)9. 9. Aage, CT, Salunke, JN: The results on fixed points in dislocated and dislocated quasi-metric space. Appl. Math. Sci. 2(59), 2941-2948 (2008) 10.Ahamad, MA, Zeyada, FM, Hasan, GF: Fixed point theorems in generalized types of dislocated metric spaces and its applications. Thai J. Math. 11, 67-73 (2013)