A Technical Seminar on OSI model
Download as PPT, PDF9 likes5,565 views
The document discusses a technical seminar on the OSI model. It describes the seven layers of the OSI model, including the physical, data link, network, transport, session, presentation and application layers. It explains the functions of each layer and how they interact to exchange data and deliver messages from source to destination across networks.
A Technical Seminar on OSI model
- 2. OSI modelOSI model OSI LayersOSI Layers InteractionInteraction between layers in the OSI modelbetween layers in the OSI model Data Exchange Using OSI ModelData Exchange Using OSI Model Headers and TrailersHeaders and Trailers Physical LayerPhysical Layer Data Link LayerData Link Layer Network LayerNetwork Layer Transport LayerTransport Layer Session LayerSession Layer Presentation LayerPresentation Layer Application LayerApplication Layer Summary of LayersSummary of Layers ConclusionConclusion CONTENTSCONTENTS
- 3. OSI Model • OSI or Open Systems Interconnection model is an ISO standard that covers all aspects of network communications. • Open system: allows different systems to communicate regardless of their underlying architecture or supplier • OSI model allows complete transparency between otherwise incompatible systems.
- 4. OSI Model • OSI model consists of seven separate layers, each defines a segment of the process of moving information across a network – physical (layer 1) – data link (layer 2) – network (layer 3) – transport (layer 4) – session (layer 5) – presentation (layer 6) – application (layer 7)
- 5. SEVEN LAYERS OF THE OSI MODEL
- 6. Interaction between layers in the OSI model
- 7. Data Exchange Using OSI Model
- 8. Headers and Trailers I • Each layer adds own information to the message it receives from the layer just above it • On the receive side, layers strip information added on peer layer of transmit side before passing the message to next higher layer • Added “control data” is placed to the beginning (header) or/and end of a data packet (trailer)
- 9. Headers and Trailers II • The whole package (packet or frame) is passed to the layer just below it. • Headers are added to the message at layers 6, 5, 4, 3, and 2. A trailer is added only at layer 2. • Examples of header info: checksum, sender/receiver address, service type
- 10. Physical Layer
- 11. Physical Layer • Purpose: Coordinates the functions required to transmit and receive streams of bits, over physical communication medium • Major issues: · what type of signals? · how are bits represented by signals? · what physical medium to use? · interface: electrical and mechanical · How bits are synchronized in Tx and Rx?
- 12. Data Link Layer
- 14. Data Link layer (1) • Purpose: error-free delivery of frames between two systems on the same network (Node-to-Node) Major issues: • what information goes into header/trailer? • how are stations addressed? Physical Address • how are transmission errors detected and corrected (Error Control)
- 15. Data Link layer (2) • how is transmission flow between stations regulated? Flow Control • how is access to “shared transmission channel” regulated? Access Control • For LANs, this layer has been subdivided into two sub-layers: “logical link control” (LLC) and “media access control” (MAC) sub-layers
- 16. Data Link Layer Example
- 17. Network Layer
- 19. Network Layer • Purpose: source to destination delivery of packet , possibly across multiple networks Major Issues: • what info goes into header? (e.g. end-to- end (logical) addresses: source and destination) • how is packet routed from source to destination? • regulation transmission flow between network nodes
- 22. Transport layer • Purpose: error free source to destination delivery of (entire) messages • how is message segmented into packets? • how are packets reassembled into messages? • how are packets delivered to correct application (port address)? • how is the connection between source and destination? connectionless or connection oriented
- 23. Transport Layer
- 24. Reliable process-to-process delivery of a message
- 25. Session Layer
- 27. Application Layer FTP FTPSMTP TelnetSMTPTelnet
- 28. Summary of Layer Functions
- 29. Conclusion The International Standard Organization created a model called the open system interconnection, which allows diverse system to communicate. The seven layer OSI model provides guidelines for the developments universally compatible networking protocol.