![Changed AP Commands in APG43L 2.0
The table below lists all AP commands that have changed their behavior on APG43L 2.0 when compared to APG43W (in bold the changes
introduced in APG43L 2.0 after APG43L 1.X)
Command Comment
acease: AP Alarms Ceasing added new option –p to cease alarm on passive node
afpls: Adjunct Processor File Processing, Files, List Added following diagnostics: - The combination transfer queue and destination set does not exist
alist: AP Alarms Listing Added new option -p to list the alarms on partner node
Added following diagnostics: - Command interrupted by the operator
alogpchg: Audit Log Protected Item, Change Removed following diagnostics:
• Co a d ot allo ed o AP2
• This is the passi e ode, ou ust e e ute the o a d o the a ti e ode
Added following diagnostics:
• Co a d ot e e uted, AP a kup i progress
alogpls: Audit Log Protected Item, List Removed following diagnostics:
• Co a d ot allo ed o AP2
• This is the passi e ode, ou ust e e ute the o a d o the a ti e ode
• Illegal optio <optio a e>
Added following diagnostics:
• Co a d ot e e uted, AP a kup i progress
alogset: Audit Log, Set Attributes Removed format 1: [-d –s] [-i] [-f]
Removed –s in format 3
Removed following diagnostics:
• AES_AFP_Server ot respo di g
• Cha gi g file size ot allo ed he a Tra sfer Queue alread is defi ed
• Co a d ot allo ed o AP2
• I orre t file size
• U reaso a le alue
Added following diagnostics:
• aes_afpd ot responding
• Co a d ot e e uted, AP a kup i progress](https://image.slidesharecdn.com/apg43linuxintroductionandcommands-240812220509-78c1e7d7/85/APG43_Linux_Introduction_and_commands-pdf-102-320.jpg)
![aloglist: Audit Log Attributes, List Removed use of [-d] in format 1
Removed following diagnostics:
• Co a d ot allo ed o AP2
• This is the passi e ode, ou ust e e ute the o a d o the a ti e ode
Added following diagnostics:
• Co a d ot e e uted, AP a kup i progress
The printouts format changed: aloglist prints only protected logs
bios_set Removed following diagnostics: - unable to connect server - illegal system configuration - snmp failure
- Illegal value for slot parameter: legal values are in the range [0-25]
- Incorrect Usage
Added following diagnostics:
- Unable to fetch SCXB IP from CS - Local magazine number expected in this system configuration - Illegal value
for BIOS POINTER - Illegal value for BIOS IMAGE - Illegal choice - SNMP failure: error in sending request to SNMP
Agent - SNMP failure: no response received from SNMP Agent - SNMP failure: error in response received from
SNMP Agent - SNMP Failure: generic error - SNMP failure: information unavailable for the selected board. - SNMP
failure: unable to fetch master status - Illegal value for slot parameter: legal values are in the range [0-25] -
Missing value for Bios Pointer.
- Missing value for Bios Image - Missing value for slot parameter. - Illegal value for magazine number parameter -
SNMP failure: selected board is unavailable
- Illegal value for slot parameter: legal values are in the range [0-26|28]
- Incorrect Usage
Usage: bios_set -m [-C COMPORT | -B [MAGADDR:]SLOT]
Usage: bios_set -p [-C COMPORT | -B [MAGADDR:]SLOT]
Usage: bios_set -P BIOS_pointer [-C COMPORT | -B [MAGADDR:]SLOT]
Usage: bios_set -i [-C COMPORT | -B [MAGADDR:]SLOT
Usage: bios_set -I BIOS_image [-C COMPORT | -B [MAGADDR:]SLOT]
- NETCONF failure: error in sending request to NETCONF Agent
- NETCONF Failure: generic error
- NETCONF failure: no response received from
- NETCONF Agent
- NETCONF failure: selected board is unavailable
The command cannot be performed for the selected board](https://image.slidesharecdn.com/apg43linuxintroductionandcommands-240812220509-78c1e7d7/85/APG43_Linux_Introduction_and_commands-pdf-103-320.jpg)
![cpdtest: IO Device, Test Removed diagnostic:
CP name or CP group is not defined
Added diagnostic:
CP name is not defined
cqrhils: Individual Quorum Log, List Added following diagnostics:
- Illegal command in this system configuration
- Unable to connect to server
- This command must be executed from IO APG.
Removed following diagnostics:
- Cannot connect other node
- No multiple CP system
Added ipaddress 2 pri tout para eter
cqrhlls: Quorum Log, List Added following diagnostics:
- Illegal command in this system configuration
- Unable to connect to server
- This command must be executed from IO APG.
Removed following diagnostics:
- Cannot connect other node
- No multiple CP system
Added ipaddress 2 pri tout para eter
crdls: CP Cluster Recovery Data, List Added following diagnostic:
This command must be executed from IO APG.
csadm: Communication Security, Administer Two new formats have been added to allow specifying the protocol type
(ftp/Telnet/mts) to block or unblock via the options –b and –a, respectively.
The option –u is not supported any more.
dsdls: Directory Service Listing Removed following diagnostics: - Communication error. Illegal message length from
DSD - Configuration Server Error
ipnaadm: IPNA Administration Added following options and formats: ipnaadm -osdump –list ipnaadm -osdump -get
file ipnaadm -copy srcfile dstfile ipnaadm -del filename ipnaadm -ren oldfile newfile
ipnaadm –show
Removed following options and formats: ipnaadm —fcend ipnaadm —osdump [—list |
—get file]
Added following diagnostics: - Read of signal header failed with error <errno> - File
<file> is not a configuration file - Show configuration files failed with error: <errno
message> - Copy file failed with error: <errno message> - Delete file failed with error:
<errno message> - Rename file failed with error: <errno message>
Removed following diagnostics: - Start of explorer in directory <dir> failed with error
<errno> - Read of signal header failed with WSA error <error> -
WSAEnumNetworkEvents failed with error <error>](https://image.slidesharecdn.com/apg43linuxintroductionandcommands-240812220509-78c1e7d7/85/APG43_Linux_Introduction_and_commands-pdf-106-320.jpg)
APG43_Linux_Introduction_and_commands.pdf
- 87. New AP Commands in APG43L 2.0 Command Comment bioschg It is used to update the BIOS UPG Image date It is used to print or set the system date and time fwprint It is used to print firmware version of some specific boards supporting the function Change between APG43L1.1 and APG43L 2.0: Added following diganostics: • U a le to o e t to the ser er Renoved following diagnostics: • O l allo ed fro IO APG fwupgexec It is used to upgrade firmware of boards supporting the function Change between APG43L1.1 and APG43L 2.0: Added following diganostics: • FW alread i stalled • Not allo ed CP hcstart It is used to to check the sanity of an APG node. Change between APG43L1.1 and APG43L 2.0: • Ne pri tout for at he o a d gi e ith optio -t RESTORE –v
- 88. fixerls It is used to print the Infrastructure event record log file (not present in APG43L 1.X) ipmifwprint It is used to print IPMI firmware version of some specific boards supporting the function Change between APG43L1.1 and APG43L 2.0: Added following diganostics: • No repl fro Co figuratio “er i e • U a le to o e t to the ser er ipmiupgexec It is used to upgrade IPMI firmware of boards supporting the function Change between APG43L1.1 and APG43L 2.0: Added following diagnostics: • Illegal o a d i this s ste configuration • No repl fro Co figuratio “er i e • Not allo ed CP • Not allo ed for this Fu tio al Board Name • Not allo ed, Neigh or “CX is ot defined or not reachable • Wro g Pa kage ipsecdef It is used to configure the IPSec function (not present in APG43L 1.X) ipsecrm It is used to configure the defined IPSec configurations (not present in APG43L 1.X) ipsecls It is used to configure the list the IPSec configurations (not present in APG43L 1.X) ldapdef It is used to define the IP address of LDAP server and its common name related to specified LDAP certificate. ncdef It is used to define APG node credential netls It is used to print network configuration Change between APG43L1.1 and APG43L 2.0:
- 89. opensession This command establishes an AP session with AP2 within an AP session opened with AP1. (not present in APG43L 1.X) pfmfwprint It is used to print the firmware version of Power and Fan Module Change between APG43L1.1 and APG43L 2.0: Added Diagnostic: Illegal command in this system configuration pfmupgexec It is used to upgrade the firmware of Power and Fan Module ping It is used to verify a host is reachable rifdef It is used to define the Reliable Public Interface function (not present in APG43L 1.X) rifrm It is used to remove the Reliable Public Interface function (not present in APG43L 1.X) rifls It is used to list the sttus of Reliable Public Interface function (not present in APG43L 1.X) rpls It is used to list RP log files stored on the AP (not present in APG43L 1.X) rptran It is used to copy all RP dump/log files from the AP file system and transfers them to a removable media, or to the local directory /support_data (not present in APG43L 1.X) snrinit It is used to start a single node recovery after a disaster. Change between APG43L1.1 and APG43L 2.0: Added option - I and correspondent printout. stmpts It is used to generate and display on the screen the encoded form of the statistical data Change between APG43L1.1 and APG43L 2.0: Added option - w Added following diagnostic: Illegal option in this system configuration -<option>
- 90. tcdef It is used to define a trusted certificate traceroute It is used to trace route of packets to destination host tzch It is used to change time zone wssadm It is used to configure AP web server
- 91. New COM CLI commands in APG43L 2.0 The table below lists all COM CLI commands valid on APG43L 2.0 (in bold those ones not present in APG43L 1.X) Command Comment abort It is used to abort configuration changes in a configuration session commit It is used to Commit configuration changes in a configuration session configure It is used to enter in a configuration session (i.e. changing configuration and executing actions) dn It is used to navigate to any existing location in the Model end It is used to commit and finish a configuration session exit It is used to move to the parent Managed Object in a configuration session <cmdOrActionName> | filter It is used to filter the output of any command or action. The filter command is a pipe extension command help It is used to provide information on current CLI mode and allowed standard COM commands. Also the CLI state diagram is also displayed
- 92. insert It is used to insert value before the specified value in a configuration session no It is used to delete an object/attribute from a specific managed information model in a configuration session. scriptmode It is used to print the scriptmode status in the ongoing CLI session. With parameter on/off, the scriptmode can be disabled/enabled show It is used to display information show-config It is used to display the output in configuration format. show-dn It is used to display the current location of the user in the MOM show-mib It is used to display the MO instance information show-table It is used to display the show verbose information without metadata in table format top It is used to move to the top of the managed object tree in a configuration session up It is used to move to the parent Managed Object in a configuration session width It is used to display the number of CLI output characters printed on a line until the line is broken
- 93. TS commands in APG43L 2.0 TS commands valid in APG43L 2.0 (no difference between APG43L 1.X and 2.0) The table below lists all TS commands valid on APG43L 2.0 Command Comment addtsuser It is used to create a Troubleshooting (TS) user account listtsuser It is used to list the existing TS users modtsuser It is used to update the TS user account expiry information pwdmodtsuser It is used to change the password for their own TS user account pwdresettsuser It is used to unlock the TS user account or to set new password for the TS user account
- 94. Discontinued AP Commands in APG43L 2.0 The table below lists all AP commands that are not available any more on APG43L 2.0 (in bold the changes introduced in APG43L 2.0 after APG43L 1.X) Command Comment aehevls: AP, OS EventLog, List Function not supported afpchd: Adjunct Processor File Processing, File Definition, Change Replaced by Data Transfer function MOM afpdef: Adjunct Processor File Processing, File, Define Replaced by Data Transfer function MOM afprm: Adjunct Processor File Processing, File, Delete Replaced by Data Transfer function MOM afpfte: Adjunct Processor File Processing, Manual Transfer, End Replaced by Data Transfer function MOM afpfti: Adjunct Processor File Processing, Manual Transfer, Initiate Replaced by Data Transfer function MOM aldblk: Alarm-Display, Block Replaced by Alarm Display function MOM alddeblk: Alarm-Display, Deblock Replaced by Alarm Display function MOM alddef: Alarm-Display Data, Define Replaced by Alarm Display function MOM aldls: Alarm-Display Data, List Replaced by Alarm Display function MOM aldpdef: Alarm-Display Property, Define Replaced by Alarm Display function MOM aldpls: Alarm-Display Property, List Replaced by Alarm Display function MOM aldprm : Alarm-Display Property, Delete Replaced by Alarm Display function MOM aldquiet: Alarm-Display, Quiet Replaced by Alarm Display function MOM aldrm: Alarm-Display Data, Define Replaced by Alarm Display function MOM aldtest: Alarm-Display, Test Replaced by Alarm Display function MOM alogact: Audit Log, Activate Replaced by Audit Logging function MOM alogdeact: Audit Log, Deactivate Replaced by Audit Logging function MOM
- 95. alogexcl: Audit Log Exclusion, Insert or End Replaced by Audit Logging function MOM alogexls: Audit Log, Excluded Items, List Replaced by Audit Logging function MOM apzvlanls: APZ VLAN, List Function not supported boardblock: EGEM and EGEM2, Board, Block Replaced by AXE Equipment function MOM boarddeblock: EGEM and EGEM2, Board, Deblock Replaced by AXE Equipment function MOM boardreset: EGEM and EGEM2, Board, Reset Replaced by AXE Equipment function MOM bupdef: Backup Parameters, Define Replaced by CP Reload Management function MOM bupls: Backup Parameters, List Replaced by CP Reload Management function MOM bupset: Backup Parameters, Set Replaced by CP Reload Management function MOM bupprint: Backup Parameters, Print Replaced by CP Reload Management function MOM burbackupstatus: AP, Backup, Status Replaced by Backup and Restore function MOM burrestorestatus: AP, Restore, Initiate Replaced by Backup and Restore function MOM burpart: AP, Burpart, Initiate Replaced by Backup and Restore function MOM burstartdate: AP, Backup, Start Date Replaced by Backup and Restore function MOM burverify: AP, Backup, Verify Replaced by Backup and Restore function MOM capdef: Command Authority Profile, Define Replaced by AXE MML Authorization function MOM capls: Command Authority Profile, List Replaced by AXE MML Authorization function MOM caprm: Command Authority Profile, Remove Replaced by AXE MML Authorization function MOM cdhch: Common Destination Handling, Destination, Change Replaced by Data Transfer Management function MOM cdhdef: Common Destination Handling, Destination, Define Replaced by Data Transfer Management function MOM cdhdsls: Common Destination Handling, Destination Set, List Replaced by Data Transfer Management function MOM cdhdsch: Common Destination Handling, Destination Set, Change Replaced by Data Transfer Management function MOM cdhdsdef: Common Destination Handling, Destination Set, Define Replaced by Data Transfer Management function MOM cdhdsrm: Common Destination Handling, Destination Set, Remove Replaced by Data Transfer Management function MOM
- 96. cdhdssw: Common Destination Handling, Destination Set, Switch Replaced by Data Transfer Management function MOM cdhls: Common Destination Handling, Destination, List Replaced by Data Transfer Management function MOM cdhrm: Common Destination Handling, Destination, Remove Replaced by Data Transfer Management function MOM cdhver: Common Destination Handling, Destination Connection, Verify Replaced by Data Transfer Management function MOM configap: Access Control List and User Groups Definition Function not supported cpch: CP Identification, Change Replaced by AXE Equipment function MOM cpdchange: IO Device, Attribute, Change Replaced by Alphanumeric Device Management function MOM cpdinsert: IO Device, Insert Replaced by Alphanumeric Device Management function MOM cpdlist: IO Device, Attribute, List Replaced by Alphanumeric Device Management function MOM cpdremove: IO Device, remove Replaced by Alphanumeric Device Management function MOM cpfchange: Central Processor File System, File Attributes, Change Replaced by CP File System Management function MOM cpfcp: Central Processor File System, File, Copy Replaced by CP File System Management function MOM cpfdf: Central Processor File System, Volumes, List Replaced by CP File System Management function MOM cpfife: Central Processor File System, Infinite File, End Replaced by CP File System Management function MOM cpfmkfile: Central Processor File System, File, Create Replaced by CP File System Management function MOM cpfmkvol: Central Processor File System, Volumes, Create Replaced by CP File System Management function MOM cpfmv: Central Processor File System, File, Move Replaced by CP File System Management function MOM cpfport: Central Processor File System, File, Transfer Replaced by CP File System Management function MOM cpfrename: Central Processor File System, File, Rename Replaced by CP File System Management function MOM cpgdef: CP Group, Define Replaced by AXE Equipment function MOM
- 97. cpgls: CP Group, List Replaced by AXE Equipment function MOM cpgrm: CP Group, Remove Replaced by AXE Equipment function MOM cpls: CP Identification, List Replaced by AXE Equipment function MOM cslremove: Cluster Session Lock, Remove Replaced by Alphanumeric Device Management function MOM cuadef: Central Processor User Association, Define Replaced by AXE Mml Authorization function MOM cuals: Central Processor User Association, List Replaced by AXE Mml Authorization function MOM cuarm: Central Processor User Association, Remove Replaced by AXE Mml Authorization function MOM dacdef: Disable Inactive User Accounts, Define Function not supported dacls: Disable Inactive User Accounts, Attributes, List Function not supported dboch: Direct Block Output, Transfer Queue Definition, Change Replaced by Data Transfer Management function MOM dbodef: Direct Block Output, Transfer Queue, Define Replaced by Data Transfer Management function MOM dbols: Direct Block Output, Transfer Queue Definition, List Replaced by Data Transfer Management function MOM dborm: Direct Block Output, Transfer Queue, Delete Replaced by Data Transfer Management function MOM emfcopy: External Media Functions, Media, Copy Replaced by External Media Management function MOM emfget: External Media Functions, Media, Assign Replaced by External Media Management function MOM emfinfo: External Media Functions, Media, Info Replaced by External Media Management function MOM exalblk: External Alarm Receiver Data, Block Replaced by External Media Management function MOM exalch: External Alarm Receiver Data, Change Replaced by External Media Management function MOM exalclear: External Alarm Receiver Data, Manually Clear Replaced by External Media Management function MOM exaldeblk: External Alarm Receiver Data, Deblock Replaced by External Media Management function MOM exaldef: External Alarm Receiver Data, Define Replaced by External Media Management function MOM exalls: External Alarm Receiver Data, List Replaced by External Media Management function MOM exalrm: External Alarm Receiver Data, Delete Replaced by External Media Management function MOM
- 98. fchcommit: Function Change Commit Function not supported fchdump: Function Change, Dump Function not supported fchend: Function Change End Function not supported fchfb: Function Change, Fallback Function not supported. fchrst: Function Change, Restore Function not supported fchstart: Function Change, Start Function not supported fchstate: Function Change, State Function not supported fcractivate: Function Change Reference Package, Activate Function not supported fcrcontinue: Function Change Reference Package, Continue Function not supported fcrend: Function Change Reference Package, End Function not supported fcrfb: Function Change Reference Package, Fallback Function not supported fcrstart: Function Change Reference Package, Start Function not supported fcrstate: Function Change Reference Package, State Function not supported fddef: Function Distribution, Define Replaced by Function Distribution Management function MOM fdls: Function Distribution, List Replaced by Function Distribution Management function MOM fdrm: Function Distribution, Remove Replaced by Function Distribution Management function MOM ftpcreate: FTP Site Create Function not supported ftpls: FTP Site List Function not supported ftprm: FTP Site Remove Function not supported hcjls: AP, Health Check, Job, List. Replaced by Health Check Management function MOM hcrfls: AP, Health Check, Report File, List. Replaced by Health Check Management function MOM hcrsls: AP, Health Check, Rule Set File, List Replaced by Health Check Management function MOM hcjdef: AP, Health Check, Job, Define Replaced by Health Check Management function MOM hcjrm: AP, Health Check, Job, Remove Replaced by Health Check Management function MOM
- 99. hwcadd: Hardware Configuration, Add Replaced by AXE Equipment function MOM hwcrm: Hardware Configuration, Remove Replaced by AXE Equipment function MOM hwcsync: Hardware Configuration. Synch Function not supported hwiconf: AXE Hardware Inventory, Configure Replaced by AXE Equipment function MOM hwiset: Node Position, Set Replaced by AXE Hardware function MOM hwmblk: HW manager Blocking, Initiate Replaced by AXE Hardware function MOM hwmdeblk: HW manager Blocking, End Replaced by AXE Hardware function MOM hwmls: HW manager, List Replaced by AXE Hardware function MOM hwmreset: HW manager, Reset Replaced by AXE Hardware function MOM hwmset: HW manager, Set Replaced by AXE Hardware function MOM hwver: Ap Hardware Version, List Function not supported Integrityap Function not supported ipmi_upg: IPMI Firmware Upgrade, Handle Replaced by ipmifwupgexec and ipmifwprint ispconf: ISP Configuration Tool Function not supported lmemstart: License Manager Emergency Mode, Start Replaced by AXE License Management function MOM lmfpprint: License Manager Fingerprint, Print Replaced by AXE License Management function MOM lminst: License Manager License Key, Install Replaced by AXE License Management information model lmlkls: License Manager License Key, List Replaced by AXE License Management function MOM nech: Network Element Data, Change Replaced by AXE Equipment function MOM nels: Network Element Data, List Replaced by AXE Functions Management function MOM nsfreset: AP, Network Surveillance, Reset Replaced by External Network Surveillance Management Function MOM nsfstart: AP, Network Surveillance, Start Replaced by External Network Surveillance Management Function MOM nsfstop: AP, Network Surveillance, Stop Replaced by External Network Surveillance Management Function MOM phacreate: Parameter Handling, Create Function not supported phaedit: Parameter Handling, Edit Function not supported phaprint: Parameter Handling, Print Function not supported
- 100. pharm: Parameter Handling, Remove Function not supported phatrans: Parameter Handling, Transfer Function not supported pfm_upg: Power and Fan Firmware, Upgrade Replaced by pfmfwupgexec and pfmfwprint sfcend: Soft Function Change, End Function not supported sfcexec: Soft Function Change, Execute Function not supported sfcfb: Soft Function Change, Fallback Function not supported sfgen: Security File Generator Function not supported ssucfg: System Supervisor, Configuration, Change Command not supported ssuls: System Supervisor, Configuration, List Command not supported Replaced by File Management model stmcc: Statistics and Traffic Measurement, Counter Collection Replaced by Statistical Counter Management function MOM stmcrc: Statistics and Traffic Measurement, Counter Rule, Change Replaced by Statistical Counter Management function MOM stmdbrt: Statistics and Traffic Measurement, Database Retainment Time Function not supported stmfo: Statistics and Traffic Measurement, File Output Function not supported stmfo –z SCREEN replaced by stmpts stmfols: Statistics and Traffic Measurement, Output Requests List Replaced by Statistical Counter Management function MOM stmmp: Statistics and Traffic Measurement, Measuring Program Replaced by Statistical Counter Management function MOM stmotls: Statistics and Traffic Measurement, Configuration and Status, List Replaced by Statistical Counter Management function MOM stmrp: Statistics and Traffic Measurement, Report Replaced by Statistical Counter Management function MOM stmttu: Statistics and Traffic Measurement, Translation Tables Update Replaced by Statistical Counter Management function MOM swlist: Software List Function not supported swmanage: Software Manage Function not supported swrprint: Software Records, Print Replaced by Software Inventory Management function MOM swrprod: Software Records, Specify, Change and Retrieve Products Identity Function not supported swrsid: Software Records, Change or Retrieve Function not supported
- 101. The Name of AP System teamdef: Teaming, Define Replaced by new AP command rifdef teamrm: Teaming, Remove Replaced by new AP command rifrm teamls: Teaming, List Replaced by new AP command rifls timerefadd: Time Reference, Add Replaced by AXE Time Reference Configuration function MOM timerefls: Time Reference, List Replaced by AXE Time Reference Configuration function MOM timerefrm: Time Reference, Remove Replaced by AXE Time Reference Configuration function MOM timerefscxconf: SCX, Configure External IP Address Replaced by AXE Time Reference Configuration function MOM timerefstart: Time Service, Start Replaced by AXE Time Reference Configuration function MOM timerefstop: Time Service, Stop Replaced by AXE Time Reference Configuration function MOM upgpkg: Upgrade Package, Handle Replaced by AXE Blade Software Management function MOM userdump: User Information Function not supported vdcreate: Virtual Directory Create Function not supported vdls: Virtual Directory List Function not supported vdrm: Virtual Directory Remove Function not supported zipc: AP, File Compression and Decompression Function not supported
- 102. Changed AP Commands in APG43L 2.0 The table below lists all AP commands that have changed their behavior on APG43L 2.0 when compared to APG43W (in bold the changes introduced in APG43L 2.0 after APG43L 1.X) Command Comment acease: AP Alarms Ceasing added new option –p to cease alarm on passive node afpls: Adjunct Processor File Processing, Files, List Added following diagnostics: - The combination transfer queue and destination set does not exist alist: AP Alarms Listing Added new option -p to list the alarms on partner node Added following diagnostics: - Command interrupted by the operator alogpchg: Audit Log Protected Item, Change Removed following diagnostics: • Co a d ot allo ed o AP2 • This is the passi e ode, ou ust e e ute the o a d o the a ti e ode Added following diagnostics: • Co a d ot e e uted, AP a kup i progress alogpls: Audit Log Protected Item, List Removed following diagnostics: • Co a d ot allo ed o AP2 • This is the passi e ode, ou ust e e ute the o a d o the a ti e ode • Illegal optio <optio a e> Added following diagnostics: • Co a d ot e e uted, AP a kup i progress alogset: Audit Log, Set Attributes Removed format 1: [-d –s] [-i] [-f] Removed –s in format 3 Removed following diagnostics: • AES_AFP_Server ot respo di g • Cha gi g file size ot allo ed he a Tra sfer Queue alread is defi ed • Co a d ot allo ed o AP2 • I orre t file size • U reaso a le alue Added following diagnostics: • aes_afpd ot responding • Co a d ot e e uted, AP a kup i progress
- 103. aloglist: Audit Log Attributes, List Removed use of [-d] in format 1 Removed following diagnostics: • Co a d ot allo ed o AP2 • This is the passi e ode, ou ust e e ute the o a d o the a ti e ode Added following diagnostics: • Co a d ot e e uted, AP a kup i progress The printouts format changed: aloglist prints only protected logs bios_set Removed following diagnostics: - unable to connect server - illegal system configuration - snmp failure - Illegal value for slot parameter: legal values are in the range [0-25] - Incorrect Usage Added following diagnostics: - Unable to fetch SCXB IP from CS - Local magazine number expected in this system configuration - Illegal value for BIOS POINTER - Illegal value for BIOS IMAGE - Illegal choice - SNMP failure: error in sending request to SNMP Agent - SNMP failure: no response received from SNMP Agent - SNMP failure: error in response received from SNMP Agent - SNMP Failure: generic error - SNMP failure: information unavailable for the selected board. - SNMP failure: unable to fetch master status - Illegal value for slot parameter: legal values are in the range [0-25] - Missing value for Bios Pointer. - Missing value for Bios Image - Missing value for slot parameter. - Illegal value for magazine number parameter - SNMP failure: selected board is unavailable - Illegal value for slot parameter: legal values are in the range [0-26|28] - Incorrect Usage Usage: bios_set -m [-C COMPORT | -B [MAGADDR:]SLOT] Usage: bios_set -p [-C COMPORT | -B [MAGADDR:]SLOT] Usage: bios_set -P BIOS_pointer [-C COMPORT | -B [MAGADDR:]SLOT] Usage: bios_set -i [-C COMPORT | -B [MAGADDR:]SLOT Usage: bios_set -I BIOS_image [-C COMPORT | -B [MAGADDR:]SLOT] - NETCONF failure: error in sending request to NETCONF Agent - NETCONF Failure: generic error - NETCONF failure: no response received from - NETCONF Agent - NETCONF failure: selected board is unavailable The command cannot be performed for the selected board
- 104. Bupidls: Backup, Product Identities, List Option –a added burbackup: AP, Backup, Initiate Options -g, -p, -v are not supported any more Added option –o to perform a complete backup of both AP nodes All diagnotistic printouts have been changed. Refer to MAN of Burbackup command. burrestore: AP, Restore, Initiate Options -r, -s, -d, -g are not supported any more All diagnotistic printouts have been changed. Refer to MAN of Burbackup command.
- 105. cfeted: Configuration Editing Tool, Edit Added following diagnostics: - Command must be executed on the active node. - Wrong dump: <detailed error description>. - Wrong dump path: <detailed error description> Options -x added Added following diagnostic: • Missi g default file. • No i put o li e. • I alid CP a e. Removed following diagnostics: • Wro g du p: <detailed error des riptio >. • Wro g du p path: <detailed error des riptio >. clhls: Central Log Handler, Log, List •Added diagnostic: - Log type '<logtype>' is not valid for this APZ type • This o a d ust e e e uted fro IO APG. clhtran: Central Log Handler, Log, Transfer Removed option –q Added following answer printout: - No file to compress Added following diagnostics: - Log type '<logtype>' is not valid for this APZ type - Not able to transfer to DVD: <detailed error description> - XM numbers are not allowed for log type '<logtype>' Removed following diagnostics: - File access error - No connection with PES_CLH_server - Command busy - CLH server is closing down - Transfer queue name '<transqueue>' is not valid - XM number is only allowed for XPU log types - XM number '<xmno>' is erroneous: <detailed error description>. - Disk full - Not able to transfer file - Not able to transfer to backup media - Not able to create zip archive - No file to compress - Not able to find zip program - Transfer queue not defined - EMF server not responding - No media in device - Media write protected - Device busy - CLH server is initializing. Please wait a moment and try again Removed following diagnostic: • Not a le to tra sfer to DVD: <detailed error des riptio > Added following diagnostic: • Not a le to tra sfer to edia: <detailed error des riptio > • This o a d ust e e e uted fro IO APG. • A edia tra sfer is alread o goi g. “ee attri ute Result Of Operatio i MO E ter al Media M for more details • A file tra sfer is alread o goi g. • A error has o urred duri g the file tra sfer to edia .“ee attri ute Result Of Operation in MO External Media M for more details.
- 106. cpdtest: IO Device, Test Removed diagnostic: CP name or CP group is not defined Added diagnostic: CP name is not defined cqrhils: Individual Quorum Log, List Added following diagnostics: - Illegal command in this system configuration - Unable to connect to server - This command must be executed from IO APG. Removed following diagnostics: - Cannot connect other node - No multiple CP system Added ipaddress 2 pri tout para eter cqrhlls: Quorum Log, List Added following diagnostics: - Illegal command in this system configuration - Unable to connect to server - This command must be executed from IO APG. Removed following diagnostics: - Cannot connect other node - No multiple CP system Added ipaddress 2 pri tout para eter crdls: CP Cluster Recovery Data, List Added following diagnostic: This command must be executed from IO APG. csadm: Communication Security, Administer Two new formats have been added to allow specifying the protocol type (ftp/Telnet/mts) to block or unblock via the options –b and –a, respectively. The option –u is not supported any more. dsdls: Directory Service Listing Removed following diagnostics: - Communication error. Illegal message length from DSD - Configuration Server Error ipnaadm: IPNA Administration Added following options and formats: ipnaadm -osdump –list ipnaadm -osdump -get file ipnaadm -copy srcfile dstfile ipnaadm -del filename ipnaadm -ren oldfile newfile ipnaadm –show Removed following options and formats: ipnaadm —fcend ipnaadm —osdump [—list | —get file] Added following diagnostics: - Read of signal header failed with error <errno> - File <file> is not a configuration file - Show configuration files failed with error: <errno message> - Copy file failed with error: <errno message> - Delete file failed with error: <errno message> - Rename file failed with error: <errno message> Removed following diagnostics: - Start of explorer in directory <dir> failed with error <errno> - Read of signal header failed with WSA error <error> - WSAEnumNetworkEvents failed with error <error>
- 107. ispprint: ISP Print Tool Added options –m and –z misclhls: Cluster CP Event Record Log, List Added following diagnostics: - The AP node is in an undefined state,cannot connect to server. - Unable to connect to server - This command must be executed from IO APG. Removed following diagnostics: - MISCLH_Server not responding - Not possible to connect to server mktr: Make Trouble Report Removed options –p and –d Added new diagnostics: - Another instance of this command is running on the node - Failed to create MKTR final output file in /support_data/mktr msdls: Messge Store listing Removed options: -d, -n, -s, -S, -t (in Single CP System) -d, -n, -s, -t (in Multi-CP system) mtzln: Multiple Time Zone Link Removed following diagnostics: - ERROR : Illegal operand XX Added the following diagnostics: - ERROR : Can not access the datadisk. - ERROR : Operand TZ_name too long - ERROR : TMZ_value not defined - TMZ_value already bound No action performed - Error : Unable to connect to server - ERROR : Operand TMZ_value should be an integer between 0–23
- 108. netdef: AP, Network, Define Removed options –i and –n Added options –a, -b, –c, –d and –s Removed following diagnostics - Illegal option Added following diagnostics - Command aborted by user - Unable to add/modify MIP address - Error when executing (immfind fault) - Vlan <Vlanalias> not found - Network <network address> not found - Destination Network <network address> already exists - Destination network Limit reached - Unable to add destination network - Unable to add/modify IP address - Unable to add/modify gateway address - Gateway address <gw_addr> already exists - Gateway Limit reached. - Unable to create Alias name prcboot: Process Control, Reboot Removed option –o prcstate: Process Control, Determine State Cha ged A s er Pri tout repla i g FCHI fo, FCRI fo a d “FCI fo ith “oft are Upgrade I Progress psdef: AP, Physical Separation Support, Define Removed following diagnostics: - Incorrect number of options - Physical Separation is already Configured - Unreasonable value <value> Added following diagnostics: - Invalid Subnetmask IP address - Route already defined Remove option –p (metric option not supported) psls: AP, Physical Separation Support, List Removed following diagnostics: - Permanent route information missing or incomplete Added following diagnostics: - Error when executing (immlist unreasonable value) - Error when executing (immlist fault) -Error when executing (immfind fault)
- 109. psrm: AP, Physical Separation Support, Remove Removed following diagnostics: - Illegal option - Incorrect number of options raidmgr: RAID Manager, Administer Added options –c –d –e –s –u Added options –h -S All diagnostic completely changed. Refer to MAN raidmgr rtrdef: Data Record, Define - Opera d site re o ed - All diagnostics printouts changed (see MAN retdef) rtrls: Data Record, List - Opera d site re o ed - Removed following printout parameters: Attachtogoh Number of connection attempts to GOH. Conntoms Number of connection attempts to MS. noofprrestarts Number of process restarts. prtimestamp Process timestamp. This parameter specifies when the running process was started. resetflag File holding time. Stattimestamp Statistics timestamp. gentime Generation time. - All diagnostics printouts changed (see MAN rtrls) rtrch: Data Record, change - Opera d a tio re o ed - removed options – k, -l All diagnostics printouts changed (see MAN rtrch)
- 110. rtrfe, Data Record, File End - Opera d site re o ed - -All diagnostics printouts changed (see MAN rtrfe) rtrrm, Data Record, Remove - Opera d site re o ed - -All diagnostics printouts changed (see MAN rtrrm) sells: Central Log Handler, System Event Log, List Added following diagnostics: - Subrack '<subrack>' is invalid. - Slot '<slot>' is invalid. - This command must be executed from IO APG. seltran: Central Log Handler, System Event Log, Transfer Removed option –q Added following answer printout: - No file to compress. Added following diagnostics: - Not able to transfer to DVD: <detailed error description>. Removed following diagnostics: - File access error - No connection with PES_CLH_server - Command busy - CLH server is closing down - Transfer queue name '<transqueue>' is not valid - Disk full - Not able to transfer file - Not able to transfer to backup media - Not able to create zip archive. - No file to compress - Not able to find zip program - Transfer queue not defined - EMF server not responding - No media in device - Media write protected - Device busy - CLH server is initializing. Please wait a moment and try again Remove following diagnostics; • Not a le to tra sfer to DVD: <detailed error des riptio > Added following diagnostics: • This o a d ust e e e uted fro IO APG. • Not a le to tra sfer to edia: <detailed error des riptio > • A edia tra sfer is alread o goi g. Refer to attri ute Result Of Operation in MO External Media M for more • A file tra sfer is alread o goi g. • A error has o urred duri g the file tra sfer to edia. Refer to attribute Result Of Operation in MO External Media M for more
- 111. stmotd: Statistics and Traffic Measurement, Object Type Configuration Removed options -i, -e, -q Added following diagnostics: - Invalid object type(s): <object_type1 object_type2 ...> - Command not executed, AP backup in progress Removed following diagnostics: - Error: Server is busy - Error: No correction area - Error: Correction area already exists - Error: Invalid Priority - Error: No such object types(s) <List of unknown object types> - stmotd: too many parameters - stmotd: remote function undefined in server - stmotd: timeout on command - stmotd: Registry Entry Missing <Environment Variable> - Error: Unable to connect to server tesrvls: Test System TraceLog Handler, List Change format of answer printout when using command with option –d Added following diagnostics: - Start time greater than stop time - CP side is not allowed - Illegal command in this system configuration Removed following diagnostics: - Illegal option - Node is passive, Please execute on active node - This command must be executed in the active node - File access error
- 112. tesrvtran: Test System TraceLog Handler, Transfer Removed operand transferqueue Added following diagnostics: - Start time greater than stop time - Not able to transfer to DVD: <detailed error description> - Illegal command in this system configuration - An error has occurred during the file transfer to media. See attribute resultOfOperation in MO ExternalMediaM for more details. - A media transfer is already ongoing. See attribute resultOfOperation in MO ExternalMediaM for more details. - This command must be executed from AP1 - A file transfer is already ongoing. Removed following diagnostics: - Illegal option - Node is passive, Please execute on active node - This command must be executed in the active node - File access error - Command busy - Disk full - Not able to transfer to DVD - Not able to create PKZIP archive - Not able to find PKZIP program - ACS_EMF_Server is not responding - No media has been inserted in drive - The media is write-protected - The device is busy - Not able to transfer to DVD: <detailed error description> tzls: Time Zone List Added option –h to get help and option -c to list the current time zone Removed following diagnostics: - ERROR : Illegal Operands X - ERROR : Illegal Operand X - ERROR : Illegal Option X - ERROR : To many arguments Added following diagnostics: - ERROR : Illegal Operand - ERROR : Illegal Option
- 113. vlanch: AP, VLAN, Change Removed option –n Removed following diagnostics: - Error when executing (general fault) <error description> - Error when executing (general fault) <error description> <object> (Error code:<Windows error code>) <error text> Added following diagnostics: - Error when executing (general fault) - INFO: No changes done - ERROR: Error creating vlan, no changes done - ERROR: Cluster Configuration updation failed vlandef: AP, VLAN, Define Removed option –n Removed following diagnostics: - Error when executing (general fault) <error description> Added following diagnostics: - Error when executing (general fault) - INFO: No changes done - ERROR: Error creating vlan, no changes done - ERROR: Cluster Configuration updation failed - Error when executing <VLAN with name <VLAN name> already exists> INFO: No VLAN added - Error when executing <VLAN with ID <VLAN TAG> already exists> INFO: No VLAN added vlanrm: AP, VLAN, Remove Removed option –n Removed following diagnostics - VLAN Public not allowed to be deleted - Error when executing (general fault) <error description> - Error when executing (general fault) <error description> <object> (Error code:<Windows error code>) <error text> Added following diagnostics - Error when executing (general fault) - VLAN Public is not allowed to delete - ERROR: Cluster Configuration updation failed - ERROR: Error Removing vlan, no changes done - Error when executing <VLAN with name <VLAN name> already deleted> INFO: No VLAN deleted - INFO: No changes done - Unreasonable value <value> - VLAN information in the cluster is not sync - VLAN <VLAN name> can not be deleted
- 114. xpuls: Central Log Handler, XPU Log, List Added following diagnostics: - Log type '<logtype>' is not valid for this APZ type. Removed following diagnostics: - File access error. - XM number '<xmno>' is erroneous: <detailed error description>. Removed option –s Added following diagnostic: This command must be executed from IO APG. xputran: Central Log Handler, XPU Log, Transfer Removed option –q Added following answer printout: - No file to compress. Added following diagnostics: - Log type '<logtype>' is not valid for this APZ type. - Not able to transfer to DVD: <detailed error description>. Removed following diagnostics: - File access error - No connection with PES_CLH_server - Command busy - CLH server is closing down. - Transfer queue name '<transqueue>' is not valid - XM number '<xmno>' is erroneous: <detailed error description> - Disk full - Not able to transfer file - Not able to transfer to backup media - Not able to create zip archive - No file to compress - Not able to find zip program - Transfer queue not defined - EMF server not responding - No media in device - Media write protected - Device busy - CLH server is initializing. Please wait a moment and try again Removed following diagnostic: • Not a le to tra sfer to DVD: <detailed error des riptio >. Added following diagnostics: • Not a le to tra sfer to edia: <detailed error des riptio >. • This o a d ust e e e uted fro IO APG. • A edia tra sfer is alread o goi g. “ee attri ute ResultOfOperation in MO ExternalMediaM for more details. • A file tra sfer is alread o goi g. • A error has o urred duri g the file tra sfer to edia. “ee attri ute ResultOfOperation in MO ExternalMediaM for more details
- 115. New Alarms Printout Comment AP FUNCTION NOT AVAILABLE This is a new alarm indicating a software fault or configuration problem in third party software in the AP. It replaces AP PROCESS STOPPED DATA OUTPUT, AP TRANSMISSION FAULT This is a new alarm indicating a failure in data transfer. It replaces the following alarms: - AP FILE PROCESSING FAULT - AUDIT LOG FAULT - CHARGING DESTINATION FAULT - CP FILE OUTPUT, AP CP FILE SYSTEM, TRANSFER QUEUE FAULT - DATA OUTPUT, AP COMMON DESTINATION HANDLING, DESTINATION FAULT - DATA OUTPUT, AP COMMON DESTINATION HANDLING, DESTINATION SET FAULT - DATA OUTPUT, AP DIRECT BLOCK OUTPUT, TRANSFER FAULT LICENSE MANAGEMENT, AP, MAINTENANCE MODE ACTIVATED This is a new observation alarm printout. It indicates that Maintenance mode of License Management function is activated. The duration of the Maintenance mode is 25 days and is displayed in the alarm printout. RELIABLE PUBLIC INTERFACE, AP, FAULT This is a new alarm that indicates a network issue related to one or both of the public NICs of the active AP node when the reliable public interface support is defined in APG43L.
- 116. Removed Alarms Printout Comment AP ANTIVIRUS FUNCTION FAULT Function not supported AP DIAGNOSTIC FAULT Not applicable AP EXTERNAL NETWORK TEAM Function not supported AP FILE PROCESSING FAULT Replaced by DATA OUTPUT, AP TRANSMISSION FAULT AP FUNCTION CHANGE FAILED Function not supported AP FUNCTION CHANGE IN PROGRESS Function not supported AP FUNCTION CHANGE REFERENCE PACKAGE FAILED Function not supported AP FUNCTION CHANGE REFERENCE PACKAGE IN PROGRESS Function not supported AP PROCESS STOPPED Replaced be AP FUNCTION NOT AVAILABLE AP SCHEDULED BACKUP FAILURE Function not supported AP SOFT FUNCTION CHANGE FAILED Function not supported AP SOFT FUNCTION CHANGE IN PROGRESS Function not supported AP VIRUS Function not supported CHARGING DESTINATION FAULT (valid for APG40) Replaced by DATA OUTPUT, AP TRANSMISSION FAULT CP FILE OUTPUT, AP CP FILE SYSTEM, TRANSFER QUEUE FAULT Replaced by DATA OUTPUT, AP TRANSMISSION FAULT DATA OUTPUT, AP COMMON DESTINATION Replaced by DATA HANDLING, DESTINATION FAULT OUTPUT, AP TRANSMISSION FAULT DATA OUTPUT, AP COMMON DESTINATION HANDLING, DESTINATION SET FAULT Replaced by DATA OUTPUT, AP TRANSMISSION FAULT DATA OUTPUT, AP DIRECT BLOCK OUTPUT, TRANSFER FAULT Replaced by DATA OUTPUT, AP TRANSMISSION FAULT ILLEGAL LOGON ATTEMPT Function not supported IO STORAGE SPACE WARNING Not applicable
- 117. Changeable Parameters Mapping All APG43L changeable parameters are part of the information model as attributes of related information model. The Table shows a mapping among APG43W parameters and APG43L 2.0 attributes on Managed Object (MO) for the parameters still applicable for APG43 Linux System. APG43W parameter APG43L ACS_ACABIN_MessageStores ManagedElement=<MeId>,SystemFunctions=1,AxeFunctions=1, DataOutputHandling=1, DataRecordM=1,MessageStore=1 Attributes: messageStoreName, numberOfFiles, numberOfRecords, recordSize, alarmLevel (not present in APG43L 1.X) ACS_ALOGBIN_BigEventsAllowed ManagedElement=<MeId>,SystemFunctions=1,AxeFunctions=1,SecurityHandling=1,AuditLoggingM=1 Attribute: largeEventDataSkipped ACS_NSF_activeFlag MO: ManagedElement=<MeId>,SystemFunctions=1,AxeFunctions=1, SupervisionHandling=1, ExternalNetworkSurveillanceM=1 Attribute: isSurveillanceActive ACS_NSF_failoverPriority MO: ManagedElement=<MeId>,SystemFunctions=1,AxeFunctions=1, SupervisionHandling=1, ExternalNetworkSurveillanceM=1 Attribute: failoverPriority StatisticalCounterM=1 Attribute: uniqueIdentityOfNode STS_STSCBIN_VendorName MO: ManagedElement=<MeId>,SystemFunctions=1,AxeFunctions=1, DataOutputHandling=1, StatisticalCounterM=1 Attribute: vendorName
- 120. Collected By : Tamer Ajaj MATERIAL Palestine