Application of Geogebra In Mathmatics Teaching

© 2021, IJMSIT All Rights Reserved 1
International Journal of Management, Sciences, Innovation, and Technology
Research Casestudy.
Vol.2, Issue.1, pp.15-26, Jan (2021) ISSN: 0000-0000
Application of Geogebra In Mathmatics Teaching
Dr. Dragan Obradovic1, Dr. Lakshmi Narayan Mishra, Dr. Vishnu Narayan Mishra
Elementary school "Jovan Cvijic", Kostolac-Pozarevac, teacher of Мathematics, Serbia
Department of Mathematics, School of Advanced Sciences, Vellore Institute of Technology (VIT) University,
Vellore 632 014, Tamil Nadu, India
Department of Mathematics, Indira Gandhi National Tribal University, Lalpur, Amarkantak, Anuppur 484 887, Madhya
Pradesh, India
Corresponding Author 1:e-mail: dragishaobradovic@yahoo.com ,Corresponding Author 2: e-mail:
lakshminarayanmishra04@gmail.com Corresponding Author 3:e-mail: vishnunarayanmishra@gmail.com
Available online at: https://ijmsit.com/volume-2-issue-1
Received: 17 Nov 2020 Revised: 21 Nov., 2020 Accepted: 27 Dec, 2020
Abstract— Mathematical education software is designed for innovative, interactive and dynamic teaching in various areas
of mathematics. Their application would be best in distance education, which implies the spatial distance between teachers
and students. In this paper, the focus will be on GeoGebra, software that mathematically connects geometry, algebra and
analysis. The method of software application and integration with the Moodle platform will be explained. Advantages of
using it for students in the process of visual mastering of mathematical material. Increasing the interactivity between teachers
and students, all with the aim of improving the quality of teaching. The work was created with the aim of popularizing the
free GeoGebra software and the distance learning platform Moodle.
Keywords— GeoGebra, dynamic mathematics software, faculty mathematics, creative environment, didactic experiment,
geometric concepts.
I. INTRODUCTION
GeoGebra is dynamic mathematics open source software for
learning and teaching mathematics in schools. It was
developed by Markus Hohenwarter and an international
team of programmers[1]. They, followed by many other
GeoGebra specialists, have done a brilliant work. Since the
time that GeoGebra was introduced are done a great number
of progressive steps by many mathematics teachers and
lecturers throughout the world. GeoGebra combines
geometry, algebra, statistics and calculus. GeoGebra
provides the basic features of Computer Algebra System to
bridge gaps between Geometry, Algebra and Calculus. The
software links the geometric constructions shown in
Geometry window to the analytic equations and coordinates
representations and graphs shown in Algebra window.
The default GeoGebra view is consisted of the
Algebra View, the Graphics View, the Input Bar, and the
Tool Bar. There are two ways to construct an object in
GeoGebra: use of the Tools in the Toolbar, or use of the
corresponding Command entered in the Input Bar. In every
case an object is constructed, its algebraic representation
appears in Algebra View, whereas its geometrical
representation appears in Graphic View. It is this dual
representation of objects – visually in the Graphics View
and Algebraically in the Algebra View –which makes
GeoGebra so powerful.
We can do geometric constructions on the drawing
pad of the graphics window and, on the other hand, we can
directly enter algebraic input, commands, and functions into
the Input field by using the keyboard. To do geometric
constructions are used the main virtual tools, which are
found in the set of the toolboxes that require from the user
to open them, select, activate and use during the
construction process. In the toolboxes are found the virtual
tools with their names linked with their functions like: New
point, Move, Line through two points, Segment between
two points etc., alongside is their picture as well. There are
also buttons like: Delete object, Move, drawing pad, Zoom
in / Zoom out, Undo / Redo buttons etc… The number of
commands that GeoGebra offers is greater than the number
of geometry tools. GeoGebra environment is very pleasant
and attractive because it has game features. The virtual tools
of GeoGebra can be easily used and played with by anyone
of the whole school system[2]. According to Hohenwarter
and Preiner, GeoGebra appears to be friendly software that
can be operated intuitively and does not require advanced
skills to get started.
II. GEOGEBRA - A TOOL FOR DYNAMIC
MATHEMATICS
GeoGebra was created with the goal of helping students
better understand mathematics. Students can easily

International Journal of Management, Sciences, Innovation, and Technology Vol.2, Issue.1, Jan 2021
manipulate variables, simply drag "free" objects along the
plane of the drawing, or use sliders [3]. Students use the
technique of manipulating free objects to generate changes,
and then notice how this reflects on the legality of the
behavior of dependent objects. In that way, students were
given the opportunity to solve and notice some problems
through dynamic research of these mathematical relations.
GeoGebra provides good opportunities for cooperative
learning. Cooperative learning is a good choice of ways to
work in many areas of mathematics. Classical lectures
should be replaced by thematically oriented interactive
ones. The primary role of the teacher is not to teach, explain
or some other type of attempt to "transfer" mathematical
knowledge, but to create situations that will enable students
to "make" the necessary mental constructions faster. In this
sense, GeoGebra provides multiple opportunities for
cooperative learning, for example working in small groups,
or interactive teaching for the whole class, or
Individual/group presentations of students[4].
GeoGebra is a dynamic math software for use in
elementary and high schools that combines geometry,
algebra, analysis, table usage, and statistics. The name of the
program is composed of parts of the words geometry and
algebra. Its creator is Marcus Hohenwarter, but the further
development of this software is the result of the joint work
of hundreds of experts in computer science, mathematics
and education involved in the work of the GeoGebra
Institute around the world[5]. On the one hand, GeoGebra is
DGS, which means that it allows the use of interactive
geometry. In addition to the classic elements obtained by
combinations and intersections of lines and circles, ellipses,
hyperbolas and parabolas can also be drawn. On the other
hand, GeoGebra allows direct entry of coordinates and
equations that will be geometrically interpreted. It is
possible to assign conic sections and lines to explicit and
implicit equations, and lines can also be given
parametrically. GeoGebra uses Cartesian and polar
coordinates. Since this program uses work with numbers,
angles, vectors, points, straight and conical sections, we can
consider GeoGebra as one of the CAS. The numerical
capabilities of this software also enable more diverse
geometric commands: center of length, focus, vertices, main
axes and diameter of conical sections, direction coefficients,
direction vectors and normal line vectors, etc. Graphic,
algebraic and tabular parts are interconnected and dynamic.
Figure 1. GeoGebra work environment
Communication between GeoGebra and the user
takes place through an interface that, if necessary, can be
presented in different forms - perspectives. The perspective
whose two main parts are the algebraic and geometric
window is the most suitable for displaying and learning
analytical geometry in a plane. The algebra window shows
the coordinates of the points, as well as the equations of the
curves we work on, as well as all other numerical values
(angles, lengths, areas, etc.). It can be visible or hidden. The
geometric window is similar to other DGS[6]. The figures
in it can be drawn directly, using the mouse or the input
field. Later, these figures can be manipulated with a mouse
or keyboard. Algebraic expressions that follow all changes
in a geometric window can be seen in an algebraic window.
The very purpose of this software - its use for educational
purposes - has dictated the way in which data entry is
determined. It is the input of data in natural notation, almost
identical to the way of writing in a notebook or on the board,
that attracts students and teachers and makes it much easier
for them to work with GeoGebra[7].
GeoGebra is written in Java, which allows it to be
used regardless of what is in use: Windows, Linux, MacOS
or Unix. In addition, it can be launched through an Internet
browser. Versions for iPad, Windows and Android tablets
are also available. In October 2014, a version of GeoGebra
for mobile phones was announced. If the program is
installed on a computer, it can still be used regardless of
whether the computer is currently connected to the Internet.
GeoGebra allows you to directly print the resulting drawing,
as well as display a dynamic drawing or description of the
structure as a web page or drawing surface as images.
Version GeoGebra 5 allows you to create new tools and
manipulate the toolbar. A special advantage when creating
worksheets for the presentation of teaching units is the
conditional display of the text, which enables the display of
parts of the material that the teacher wants to emphasize at
a given moment. By the way, most of the geometric
representations in this paper were done with the help of
GeoGebra.

On the other hand, GeoGebra offers teachers significant
opportunities to create interactive educational materials that
can also be accessed online. GeoGebra stimulates teachers
to use technologies in teaching, in the fields of: visualization
of mathematics; "research" in mathematics; interactive
classes via the site, or remotely; various forms of application
of mathematics, etc.
III. USER INTERFACE AND BASIC COMMANDS
3.1. Multiplicity of representations of mathematical objects.
GeoGebra has three different ways of observing
mathematical objects: a graphical representation, an
algebraic representation, and a tabular representation. They
allow mathematical objects to be represented in three
different ways: graphically (e.g. point, graph function),
algebraically (e.g. point coordinates, equations) or in table
view cells [8]. All views of a single object are dynamically
linked and will change automatically if you change any
view, regardless of how the object was originally created
[Ggb].
Figure 2. GeoGebra interface
3.2. Graphic display
Using the construction tools available in the toolbar
with the mouse, geometric constructions can be performed
in a graphical representation. Select any construction tool
from the toolbar and read the toolbar help (located next to
it) to find out how the selected tool is used. Any object
created in a graphical representation has its representation
in an algebraic representation. Each icon in the toolbar
represents a toolbox that contains similar construction tools.
To open the toolbox, click the small arrow in the lower-right
corner of the toolbar icon.
3.2.1. Getting to know the graphic display
The Graphics View always displays the graphical
representation of objects created in GeoGebra. In addition,
the Graphics View Toolbar is displayed at the top of the
GeoGebra window, with the Undo / Redo buttons in the
top right corner. The Graphics View is part of almost all
Perspectives.
The purpose of this first activity is to practice using the Tool
Bar and to get comfortable working with objects in the
Graphics View.
1. To begin with, hide the Algebra View. There are three
ways you can do this:
• You can go to the View Menu → Algebra, or
• Ctrl + Shift + A or
• You can click on the small icon in the upper right
corner of the Algebra View Window.
2. Next, show the Coordinate Grid . There are two ways you
can do this:
• You can go to the View Menu → Grid, or
• Now that the Algebra View is closed, you can click on
the small grid icon in the upper left corner.
Note: The Tools of the Graphics View Toolbar are organized
by the nature of resulting objects or the functionality of the
Tools. You will find Tools that create different types of
points in the Points Toolbox (default icon ) and Tools that
allow you to apply geometric transformations in the
Transformations Toolbox (default icon).
3.3. Algebraic representation
Using the input bar, you can enter an algebraic expression
directly in GeoGebra. When you press the Enter key, your
algebraic entry appears in the algebra view, while the
graphical view is automatically displayed in the graphical
view. For example, entering a function: f (x) = x + 3 will
write a function f in algebraic representation and display a
graph of that function in graphical representation. In the
algebraic representation, mathematical objects are organized
as independent and dependent objects. If you create a new
object without using one of the existing objects, it is
classified as an independent object. If a new object is created
using an existing object, it is classified as a dependent object.
It is also possible to change an object in the algebra view: it
is important that the Move tool is selected before double-
clicking an independent object in the algebra view. In the
input box that appears, you can directly change the algebraic
representation of the objects. When you press the Enter key,
the graphic display of the objects will change automatically.
If you double-click a dependent object in the algebra view, a
dialog box will appear that allows you to redefine the objects.
GeoGebra offers a wide list of commands that can be entered

into the input bar. You can open the list of commands in the
right corner of the input bar by clicking the Commands drop-
down menu. After selecting a command from the list (or
typing the command directly into the input bar) you can press
F1 to get information about how to use the command (syntax
and command arguments).
3.3.1. Algebra Input Commands
By default, the Algebra View is opened next to the
Graphics View. In addition, either the Input Bar is displayed
at the bottom of the GeoGebra window (GeoGebra Desktop),
or an Input Field is integrated directly in the Algebra View
(GeoGebra Web and Tablet Apps). The Graphics View
Toolbar is displayed at the top of the GeoGebra window,
with the Undo / Redo buttons in the top right corner.
GeoGebra contains a set of internal commands and
functions. These can be entered directly by using the box
beside the word Input.
The Input bar is by default located in the bottomof GeoGebra
window.
There are other commands available also that you can
examine at your leisure in the GeoGebra help file. With these
commands you can draw many types of graph that are not
possible by just using the Geometry toolbar.
For example if you enter sin(x) into the Input bar and press
the Enter/Return key you will find that the graph of sin x is
drawn on the screen. The command Function[sin(x),0,2 pi]
will draw the graph of sin x from 0 to 2π. Note the use of the
square brackets and the space between the number 2 and the
constant pi. We are now going to look at the ways that we
can use direct input, entered into the Input bar, to perform
many different constructions and operations.
3.4. Table view
In GeoGebra, each table view cell has a specific name, which
allows each cell to be addressed directly. For example, the
cell in column A and row 1 is called cell A1. The cell name
can be used in expressions and commands to address the
contents of the corresponding cell. You can enter not only
numbers in cells, but all types of mathematical objects (for
example, point coordinates, functions, commands). If
possible, GeoGebra will display a graphical representation of
that object immediately after entering the object. With such
an entry, the name of the object will correspond to the name
of the cell in which the object was originally created (eg A5,
C1).
3.4.1. Graphics View Toolbar
The Graphics View Toolbar provides a wide range of Tools
that allow you to create the graphical representations of
objects directly in the Graphics View. Every icon in the
Toolbar represents a Toolbox that contains a selection of
related construction Tools. In order to open a Toolbox, you
need to click on the corresponding default Tool shown in the
Graphics View Toolbar (GeoGebra Web and Tablet Apps)
or on the small arrow in the lower right corner of the Toolbar
icon (GeoGebra Desktop).
Note: The Tools of the Graphics View Toolbar are
organized by the nature of resulting objects or the
functionality of the Tools. You will find Tools that create
different types of points in the Points Toolbox (default
icon ) and Tools that allow you to apply geometric
transformations in the Transformations Toolbox (default
icon ).
IV. GETTING STARTED WITH GEOGEBRO
There are two views shown by default when you start
GeoGebra, the algebra view and the graphics view. In the
upper right corner of each view there are icons to show the
view in a new window or to close the view. You can find all
views under the menu Views. The program has a user-
friendly design which lets the user try it out by clicking on
icons to create objects. Every object can also be created by
writing a command in the input box.
Figure 3. GeoGebra Classic

Figure 4. GeoGebra 5
4.1.1. The tool bar
Each icon in the toolbar will show a drop-down list of
tools if you click on the small arrow in the lower right corner
of the icon.
Each tool will let you enter an object in the graphics
view, the toolbar help describes what is needed to make the
object. If the toolbar help gives the hint to "select a point",
you can either select an existing point by clicking on it, or
click anywhere in the graphics view to make a new point.
Some objects require other existing objects; as an example,
you cannot make a parallel line if you don't already have a
line in the graphics view.
As long as a tool is selected in the toolbar, clicking in the
graphics view will make a new object. Select the Move-
tool to move an object (it takes a while for beginners to
get used to this).
4.1.2. Properties
All objects have properties that you can change. The most
common properties can be changed by using the styling bar.
If no object is selected, the styling bar will show common
properties for the graphics view. You toggle the styling bar
by using the styling bar icon in the upper left corner of the
graphics view. If you want to change the details of the
coordinate system, click on the small wheel in the upper
right corner and choose "Graphics". In the window that pops
up, you find all the properties of the graphics view.
When an object is selected, the styling bar for that object
will be shown. In order to change the styles of the points
defining a circle, you must first select a point. Note that the
opacity of circles is set to 0 by default, i.e. they are
transparent. You can change the opacity in the styling bar.
If you want to see all properties of an object, start by
selecting it, then right-click and choose Object Properties;
the Object Properties window will pop up.
Names and labels.
Each object in GeoGebra is given a name (you can name it
yourself or change the given name). The names of all objects
are shown in the algebra view. If the algebra is shown when
creating an object, the label will be shown by default. If you
don't want to show any labels, close the algebra view! After
an object has been created you can choose to show or hide
the label. Right-click on the object or use the styling bar.

4.1.4. Handle many objects
If you for instance want to hide all points, you can select all
points by clicking on the heading Point in the algebra view.
Then right-click on the selection and uncheck Show object.
You can also select many objects by holding
down Shift while selecting objects in the algebra view.
4.2. Characteristics of GeoGebra
The main feature of GeoGebra is not to use it as a tool
for making pictures, but rather to use it as a tool for making
dynamic constructions. In order to learn GeoGebra
however, it may be a good idea to start by making pictures.
Exercise 1
Create, change and delete objects
Check out how to create objects. Make sure you know how
to create following objects:
 Circles in two different ways; use the tools
Circle with Center through Point and Circle
with Center and Radius.
 Polygons in two different ways; use the
tools Polygon and Regular Polygon.
 Perpendicular and parallel lines.
 Reflections in lines.
 Intersection points.
Also make sure you know how to:
 change the appearance of the objects you created
and how to move them around,
 change the appearance of the graphics view,
 show text in the graphics view.
Also try to:
 regret by clicking ctrl+z or cmd+z, or by using the
icons in the upper right corner of the GeoGebra
window, zoom in and out using the mouse wheel
or trackpad.
4.3. Characteristic of dynamic (or interactive) geometry
The main feature of dynamic (or interactive)
geometry is that you should be able change a geometrical
object without changing the significant properties of the
object.
If you draw a rectangle on a paper, your rectangle is merely
one example of a rectangle. If you draw a rectangle in
GeoGebra by placing four points, you can destroy the
rectangle by dragging one of these points.
If you want to make a rectangle as a construction, you
must consider the significant properties of a rectangle.
When the construction is done, you should be able to drag
some of the vertices to change the rectangle without
destroying the properties of the rectangle; your construction
should pass the dragging test.
Figure 5. See all steps of the construction of a rectangle.
Click on the play-icon.
4.3.1.Free and dependent objects
objects that depend on other objects. There is a
difference between free and dependent objects.
Try out creating following objects:
Figure 6. Object construction
 Make a circle using points A and B.
 Make a point C on the circle.
 Make a point D not on the circle.
 Move all points
You can move the point D freely. If you
move A or B you change the circle, these points define the
circle. The points A and B are free but the circle is a
dependent object, it depends on the points.
If you move C it moves along the circle. C is defined to be
a point on the circle and is hence dependent.
Observe the algebra view and choose Sort by:
Dependency; the point C and the circle c are dependent
objects.

4.3.2.Intersection points
An intersection point is a dependent object that depends on
the two objects it intersects. Unlike a point on a circle, an
intersection point cannot be moved at all and it is by default
colored black. When making constructions keep an eye out
on the color of the points. If an intended intersection point
isn't black, you have failed intersecting two objects.
In most cases you can use the tool Point when making
an intersection point. Sometimes, however, you want an
intersection point where several objects intersect. In that
case it may be easier to use the tool Intersect.
Figure 7. Display of the intersection point
If you, as in the picture, have three segments intersecting at
approximately the same point, don't click on the intersection
of the segments but click twice, first on one segments and
then on the other using the Intersect tool. You can
click on the segments either in the graphics view or the
algebra view.
4.3.3. Ruler and compass
A geometric construction is often understood as a
construction made using only a ruler and compass. Here we
use the word construction as a construction you can make
using all GeoGebra tools.
It is possible to use GeoGebra for classical ruler-and-
compass-constructions. Choose Tools - > Customize toolbar
to pick out the tools corresponding to a classical ruler and
compass.
Figure 8. A customized tool bar for ruler and compass
exercises.
4.3.4. Exercises
Exercise 1
Peaucellier-Lipkins linkage
The first mechanical linkage that transforms rotary motion
into straight-line motion (and vice versa) is the Peaucellier-
Lipkin linkage that was invented in 1864.
The linkage can be modelled using GeoGebra, such a model
is shown below.
Figure 9. Drag the blue point.
In the figure below some points that are needed are shown.
The point C should be draggable along a circular path. When
dragging C the point F should move along a line.
There are three distances in the model that should not
change when dragging CC. Following equalities must hold:
AB = AC

BD = BE
CD = CE = DF = EF
Since these distances should not change, you should use the
tool Circle with Center and Radius. The three radii
needed can be represented by sliders.
Make an interactive GeoGebra model of the
Peaucellier-Lipkin linkage by following these steps:
Step 1
Construct the three first points, the points called
A,B,C in the figure. The points B and A must not move
when you drag C.
Step 2
Construct the points called D and E in the figure.
These two points have the same distance to C and the same
distance to B. How to you make this happen?
Step 3
Construct the point called F in the figure. How do you
do this and still maintain the equalities CD=CE=DF= EF?
Step 4
When your construction works you can show the
rotary path and the straight-line path by letting the
corresponding points show a trace. Right-click on a point
and check Trace on.
V. PROOF OF THALES'S THEOREM ON THE
PERFORMANCE ANGLE USING GEOGEBR
Before the construction itself, we will recall Thales' theorem
on the circumferential angle and present its formal proof.
Theorem: Every circumferential angle over the diameter of
a circle is a right angle.
Figure 10. Construction of Thales' theorem
Proof: Let's look at the picture.
Figure 11. Proof of Thales' theorem
It should be proved that α + β = 90 °. We see that the
lengths AS, BS and CS are equal (because these are the radii
of the circle). It follows that we have two isosceles triangles,
ΔASC and ΔBCS. Therefore, the angles along vertices A
and C are the same, ie the angles along vertices B and C are
equal. Furthermore, it is also true that α '+ β' = 180° (because
these angles are complementary). In our proof we will also
take advantage of the fact that the sum of the interior angles
of a triangle is always 180 °.
13
2α + α' = 180° [2]
2β + β' = 180° [3]
Adding [2] and [3] follows:
2α + 2β + α' + β' = 360° [4]
2α + 2β +180° = 360° [5]
2α + 2β = 180° [6]
After dividing equation [5] by 2 it follows as in the
assumption:
α + β = 90° [7]
Such a formal proof of Thales' theorem would not be
clear to all students, in fact only a few would understand it,
and that is why this proof is processed in additional classes
and with more advanced students. However, if we still want
to convince students of the accuracy of Thales' theorem, we
will use GeoGebra and its property of dynamism.

Tool selection Procedure
We draw an arbitrary length AB
We draw a bisector over the length
AB using a tool
Determine the point S (intersection
of the length AB and its bisectors)
We construct a circle c with center in
S and radius AS
On the circle c we construct an
arbitrary point C and connect in
ΔABC
At vertex C we construct a right
angle
Use this tool on the drawing to mark
the top C ΔABC and drag on the
work surface
With the last step in the construction algorithm when
drawing the vertex C on the circle c, all students will notice
that the value of the circumferential angle over the diameter
of the circle c did not change at any time and was 90° and
that was the goal to show.
VI. STUDENT MOTIVATION FOR WORK WITH
GEOGEBROME
The first impression is sometimes the most important, so it
is with the mathematical software GeoGebra. The
opportunity should be taken when students meet GeoGebra
for the first time and the lesson should be designed to take
advantage of the interesting side of the program.
Depending on which
14
grade of primary school it is (fifth, sixth, seventh or eighth)
and regardless of whether students will use the software on
the school computer or will present the program and its
capabilities teacher there are interesting assignments for the
first lesson in which GeoGebra is used. Motivation is a term
used to denote all those psychological factors that govern
people's behavior. The most important aspects of motivation
include intention to learn, interest in the material, striving
for achievement, level of aspiration, success and failure in
learning, knowledge of learning outcomes, intrinsic and
extrinsic motives [9].
Students are differently motivated to learn
mathematics which largely depends on both internal and
external factors. For some students, sufficient motivation is
just learning with which they satisfy the need to know
external reality, which is accompanied to a large extent by
the presence of intellectual emotions. In other students,
internal motivation is insufficiently developed and in them
learning is related to the external reward to which learning
leads them (assessment, practical application of what has
been learned, etc.). In addition to a favorable motivating
factor for effective learning of mathematics in students, it is
important to develop desirable habits and attitudes towards
the subject of Mathematics.
Research has shown that students' attitudes and
habits, related to mathematics, significantly influence their
learning styles, understandings related to the nature of
mathematical knowledge and the construction of cognitive
style in students. Building desirable attitudes toward the
subject of mathematics and mathematics as a science makes
all of life’s learning much more likely. Students develop a
sense of creativity and make it easier for them to build
compact, functional knowledge structures.[10]
One of the most important tasks of teachers is to
develop students' interest in teaching materials. Since the
interest develops more easily for the activity in which we
have success, the teacher should occasionally allow weaker
students to experience a sense of success.
Bruner (1966) believes that the "desire to learn" can
be managed in teaching through discovery, provided that:
1. Motive of curiosity - teaching should be organized
in such a way that it encourages and develops students'
searching curiosity, which makes them satisfied and even
more curious;
2. Motive of competence - teaching should be
organized in such a way that each subsequent task requires
a higher level of knowledge or habits than was achieved in
the previous stage. This will satisfy the child's aspiration to
reach the ability to interact effectively with his environment;
3. Motive of identification - the child has a strong
desire to model his I in relation to some role models. The
teacher is often that role model and this fact should be taken
into account in the educational process;
4. Motive of interaction (cooperation) - the school
should ensure that the student is not the object of learning
but the subject of the teaching process[11].
Piaget (1980) also believes that the development of a
child's cognitive abilities is favorably influenced by research
procedures and methods of active learning. He believes that
cognition and motivation are two aspects of the same
process.
The most important reason for learning is natural
human curiosity, the desire for knowledge, the need to deal
with what interests us. Students will be happy to learn what
is interesting to them and will not even ask where they will
need this knowledge, if they have the material and way of
learning interesting. It is important that the teacher presents
the material as interestingly as possible. It is good that the
lessons are dynamic, which can be achieved by applying
various methods and teaching technologies. Independent
activities are always more interesting to the student than dry
transmission teaching. If students find the subject or way of
teaching interesting, it will be easy to motivate them to
learn[12].
GeoGebra in teaching mathematics allows students to gain
direct experience of mathematical problems, motivate
students and with their help students develop their own
mental models, which allow more efficient hypotheses.

Experimentally, students can further consolidate their
existing knowledge or directly correct unsustainable
assumptions, depending on whether their hypotheses have
withstood the test or not.
VII. ANALYSIS
Mathematical subjects today are difficult to realize through
distance learning. It is difficult to write formulas, draw
graphs or analyze necessary points. Geogebra is one of the
ways to realize mathematics
15
via the Internet. GeoGebra software is free and customizable
to noon students. Incorporating into MOODLE is very easy.
By getting acquainted with relatively new software,
professors will better understand and explain it to students.
I can place my ideas to other professors, which undoubtedly
improves the quality of the material. This way, professors
can more easily resolve their software concerns. GeoGebra
is written in the Java programming language, which makes
it easier to export files as dynamic Web pages. This feature
allows you to easily and modestly create online math
content (math applets). To create more complex content,
knowledge of the basics of the Java programming language
is necessary. The design of the GeoGebra user interface is
also reflected in the intention to encourage efficient learning
realized according to the principles of distance learning. The
principle of multimedia prefers to use words and graphics
instead of the words themselves - it is implemented in
several ways in the GeoGebre user interface by combining
text (in this case numerical and algebraic expressions) with
graphic presentations. Technical support is another
important factor when it comes to successful professional
development with technology. On the one hand, the faculty
must provide an appropriate technological and technical
infrastructure consisting of hardware components, such as
computers and projectors, software packages, which include
certain general software tools and available online learning
content, as well as a reliable Internet connection
VIII. CONCLUSION
Learning mathematics by discovery with the help of
computers and dynamic geometry programs Geogebra,
along with methodically designed and didactically designed
interactive digital educational materials, ensures the activity
of all students in the class, increases the motivation to learn
mathematics, encourages independent drawing of
conclusions, but also cooperation among students.
Through the above examples, this paper shows the
great usefulness of the dynamic program GeoGebra in the
teaching process. It is important that the student learns alone
or in pairs on his computer, that he tries to discover new
knowledge. The knowledge thus acquired will remain in the
memory longer, and the student will learn to think. This will
make each new problem much easier to solve and master the
art of discovery.
However, whether this is feasible in teaching practice
depends largely on school conditions. It has been shown that
students are willing to cooperate in introducing changes in
teaching, but if a mathematics teacher is unable to use the
computer room for the purposes of their teaching, then they
will not be able to implement the ideas described in this
paper. Nevertheless, I hope that reading the paper will
encourage other teachers to try to make changes in their
pedagogical practice in accordance with the school
conditions in which they work.
IX. REFERENCES
1. [1] Hohenwarter J, Hohenwarter M. Introduction
to GeoGebra. 2008; 3-20.
2. [2] Hohenwarter M and Preiner J. Dynamic
mathematics with GeoGebra. The Journal of
Online Mathematics and its Applications. 2007; 7:
1448
3. [3] Technology, Informatics, Education 3,
Belgrade: Institute for Pedagogical Research, Novi
Sad: Center for Development and Application of
Science, Technology and Informatics, Novi Sad /
Belgrade, 2004.
4. [4] Hohenwarter, M .; Preiner, J., “Dynamic
Mathematics with GeoGebra”, Journal for Online
Mathematics and its Applications, Volume 7,
Article ID 1448.
5. [5] Hohenwarter, M .; Preiner, J., Taeil Yi,
Incorporating GeoGebra into Teaching
Mathematics at the College Level, Proceedings of
ICTCM 2007, Boston, MA, 2007.
6. [6] BMUK Arbeitsgruppe. New techniques in
geometric paintings, volume III.
Bundesministerium für Unterricht und Kunst,
1991.
7. [7] Bruno Buchberger and Tudor Jebelean.
Teaching of Mathematics using Theorema.
International Journal of Computer Algebra in
Mathematics Education, (6): 25–50, 1999.
8. [8] Maric, M., Radojicic, M., Arsic, A., and
Radovic, S. (2011). "GeoGebra - modeling and
dynamic construction tool". Symposium
Mathematics and Applications, Faculty of
Mathematics, Belgrade.
9. 16
10. [9] Herceg, D., Herceg, Ђ. (2009), GeoGebra - in
mathematics teaching, Republic seminars on
mathematics and computer science teaching in
primary and secondary schools, Belgrade, January
17 and 18, 2009.
11. [10] Alderman, M. K (1990). Motivation for at-risk
students. Educational Leadership, 481, 27-30.
12. [11] Bojovic I. (2016). Indicators of application of
motivational strategies in planning and preparation
of the teaching process; in L. Miškeljin, Z. Saljic
and J. Miljković (eds.): Meetings of pedagogues -
Scientific conference "Evaluation in the
educational process". Belgrade: Pedagogical
Society of Serbia and the Institute for Pedagogy
and Andragogy of the Faculty of Philosophy.
13. [12] Glasnović Gracin D. (2008), Computer in
Mathematics Teaching - Theoretical Background

and Methodological Guidelines. Mathematics and
School, Volume X, No. 46, p. 10-15.
Authors Profile
[1] Dr. Dragan Obradovic1
[2] Dr. Lakshmi Narayan Mishra
[3] Dr. Vishnu Narayan Mishra
1- Elementary school "Jovan Cvijic", Kostolac-
Pozarevac, teacher of Мathematics, Serbia
2- Department of Mathematics, School of Advanced
Sciences, Vellore Institute of Technology (VIT)
University, Vellore 632 014, Tamil Nadu, India.
3- Department of Mathematics, Indira Gandhi National
Tribal University, Lalpur, Amarkantak, Anuppur 484
887, Madhya Pradesh, India.

Application of Geogebra In Mathmatics Teaching

More Related Content

What's hot (20)

Similar to Application of Geogebra In Mathmatics Teaching (20)

More from International Journal of Management, Sciences, Innovation, and Technology IJMSIT (6)

Recently uploaded (20)

Application of Geogebra In Mathmatics Teaching