Arc runner 0317_post
0 likes115 views
The Steelmax Arc Runner is a portable, programmable welding carriage that can produce consistent, high-quality welds through stored welding programs. It uses a magnetic base and electronic speed control to stabilize welding speed. Operators can program welding patterns, lengths, and speeds through two buttons. The carriage repeats optimal welds and improves productivity over manual welding. Optional accessories allow for dual-torch, extended reach, and guided welding on various joint geometries.
Arc runner 0317_post
- 1. 877-833-5629 www.steelmax.com PROGRAMMABLEWELDING CARRIAGE FROM STEELMAX ® ARC RUNNER PORTABLE & PROGRAMMABLE WELDING CARRIAGE REPEATS OPTIMUM WELD PROCEDURE The Steelmax® Arc Runner is a portable, programmable welding carriage designed to produce consistent, high-quality welds. The powerful magnetic base and closed loop electronic speed control provide speed stabilization in all positions. The unit enables weld bead geometry that is exact to the required specifications, substantially reducing costly over welding and decreasing filler metal usage. The Arc Runner can be programmed in continuous or stitch welding modes. Two easy-to-use function buttons enable programming of weld length, distance between welds, reverse fill, crater fill time and other required patterns and parameters. The Arc Runner travels at full speed between stitches, which saves valuable welding time. An optional pendulum torch oscillator is available for the Arc Runner to produce weave welds. The oscillator allows for precise control of weave width, weave speed and left/right side wall dwell. Arc Runner’s microprocessor allows for development, storage and reproduction of up to 40 different welding programs for various joint configurations and multi-pass, multi-layer welds. Once an optimum weld procedure is developed, stored and programmed, Arc Runner will repeat it over and over again. The Arc Runner can be used with the innovative Steelmax flexible guide rail system.
- 2. 877-833-5629 STEELMAX.COM sales@Steelmax.com Fax: 303-690-9172 ARC RUNNER FROM STEELMAX® FEATURES • Compact, lightweight design with durable cast aluminum housing • Permanent magnet clamping system with on/off lever ensures positive magnetic traction • Maintenance free, 4-wheel planetary gear drive system • Standard torch holder for welding torches with diameters of 5/8" – 7/8" (16-22 mm); optional large holder for diameters up to 1-3/8" (35 mm) • Precise cross-slide torch adjustment • Multifunctional LED display and 2 function buttons for welding pattern programming • Closed-loop speed control system stabilizes travel speed to reduce weld defects and costly repair work • Consistent heat input reduces distortion • Automatic ARC ON/OFF system initiates welding and travel, simultaneously • Self-guiding roller arms eliminate the need for track • Improves work environment – reduces fatigue and repetitive stress – removes operator from heat and fumes • Capable of carrying and controlling 2 torches (without oscillation) • Up to 40 complete programs may be stored in non-volatile memory 1 2 3 4 5 6 7 8 9 1. Drive unit with control panel 2. Main Supply Switch (0/I) 3. Cross slide assembly 4. Guide arm assembly with brass roller wheel 5. Quick release torch holder (optional accessory) 6. Power supply socket 7. Arc control cable socket 8. Magnetic adhesion release lever 9. Cable holder
- 3. 877-833-5629 www.steelmax.com 2 . Dual Torch Mount enables mounting of second torch for dual-sided fillet welding Product Code: SM-PDT-0466-40-00-00-0 3. Torch Extension Arm enables extended reach for torch placement Product Code: SM-PRD-0466-43-00-00-0 4. Edge Following Guide Arms enables guiding off an outside edge Product Code: SM-PRW-0476-21-00-00-1 5. Adjustable Guide Arms enables guiding on lap joints and templates Product Code: SM-PRW-0476-22-00-00-1 6. Flexible Guide Rail 72” Long for LR and AR Product Code: SM-PRW-0466-50-01-01-0 7. Flexible Guide Rail Alignment Tool quickly aligns the flexible guide rail to the appropriate distance from the joint Product Code: SM-UST-0466-53-00-00-0 8. Rail Guide Arms for Arc Runner (set of 2) Product Code: SM-PRW-0476-50-01-00-1 9. Magnet for Flex Rail (LR and AR) - 10 required Product Code: SM-BLO-0466-50-01-10-0 10. Quick Connect Torch Holder quick connect/release torch holder Product Code: SM-ZRZ-0466-04-01-00-0 11. Magnet Guide Arms for Arc Runner (set of 2) enables guiding on overhead profiles and permits bi-directional movement Product Code: SM-PRW-0476-52-00-00-0 12. Low Guide Arms for Arc Runner (set of 2) enables guiding on short profiles and edges Product Code: SM-PRW-0476-54-00-00-1 13. High Guide Arms for Arc Runner (set of 2) enables guiding on plates and stiffeners with cut outs and holes Product Code: SM-PRW-0476-55-00-00-1 Oscillator Technical Specifications Oscillation type Pendulum Amplitude R-150 mm 0.08-1.2” (2-30 mm) Frequency 12-115 cycles/min Dwells 0-3 s. Weight 5.5 lbs (2.5 kg) Product Code SM-WC-AR-OSC OPTIONAL ACCESSORIES: 1. Oscillator
- 4. 877-833-5629 STEELMAX.COM sales@Steelmax.com Fax: 303-690-9172 For ordering and customer service, or to request detailed product information or demonstration videos, contact: All information is subject to change without notice. ARC 03/2017 ©2017 STEELMAX PROGRAMMABLEWELDING CARRIAGE FROM STEELMAX ® Arc Runner Technical Specifications Part Number SM-WC-AR or SM-WC-AR-230 Power supply 115-230VAC / 50-60 Hz (separate units due to plug interface) Welding positions Vertical / Horizontal Chassis to material clearance 3/16" (5 mm) minimum Drive system Friction drive with worm gear reduction Four wheel drive, heat resistant silicone wheels Tracking method 2 roller guides in various configurations Towing force Vertical: 33.7 ft. lbs (150 Nm) Horizontal: 49.5 ft. lbs (220 Nm) Torch Up-Down 1-3/8" (35 mm) adjustment Left-Right 1-3/8" (35 mm) Guide roller adjustment 3" (75 mm) Travel direction switch program start, direction left / stop / program start, direction right Control Function button F1 Continuous welding, dash, crater fill, backweld panel Function button F2 Value change “+” or “-” Arc ignition switch TEST / 0 / I Speed knob Horizontal speed: 0 – 47-1/4"/min (0-1200 mm/min) Vertical speed: 0 – 43-3/8"/min (0-1100 mm/min) Automatic stop Limit switches at both ends Noise Level < 70 dB Dimensions (LxWxH) 15" x 14-5/8" x 15-3/8" (382 mm x 372 mm x 390 mm) Weight 29.8 lbs (13.5 kg)