Automate high-touch server lifecycle management tasks

Automate high-touch server
lifecycle management tasks
with Dell EMC OpenManage Enterprise
integrations and plugins
IT admins have a long list of responsibilities. Tasks like manual
server management, maintenance, and troubleshooting can
consume huge quantities of their time and energy. Dell EMC™
OpenManage™
Enterprise (OME) 3.5 contains features and
capabilities designed to lighten their load.
In our hands-on evaluation, we found OME systems
management automations shaved valuable time and effort off
our manual server discovery and firmware update workflows.
Plus, when we used OME in conjunction with Power Manager
and OpenManage Integration with ServiceNow®
(OMISNOW),
event tracking and monitoring was completely automatic after
our initial policy creation process
. We also found that once
our servers under test completed server-initiated discovery
(an OME feature where servers automatically notify OME
of their presence1
), discovering and monitoring them for
actionable hardware issues through the OME console with the
SupportAssist Enterprise (SAE) plugin required zero additional
steps and no additional time.
Read on to see how OME automations can dramatically
reduce the amount of IT admin time and effort required
on high-touch, routine management tasks throughout the
server lifecycle.
with server-initiated
discovery*
Streamline
server discovery
and profile
deployment
*vs. a manual approach
with Power Manager
and OMISNOW*
Remove the
middleman for
critical alerts and
warnings
with SAE*
Proactively identify
hardware and
software issues
in multiple servers
Update firmware
in as little as
46 seconds of
admin time*
Automate high-touch server lifecycle management tasks March 2021
A Principled Technologies report: Hands-on testing. Real-world results.

Automations that scale
By automating high-touch, routine tasks, Dell EMC OME
plugins and integrations empower IT admins to deliver
effective and efficient systems management from a
single console.
For this study, we completed a variety of common
sever lifecycle management tasks on three Dell EMC
PowerEdge™
R740 servers using the OpenManage
Enterprise console, OpenManage Enterprise Power
Manager, OMISNOW, and the SAE plugin. Then we
compared the time and effort each task required with
automation versus with a manual method that utilized Dell
iDRAC9. The following sections show how the Dell EMC
OpenManage Enterprise portfolio can save considerable
admin time and effort with server-initiated discovery,
policy-based automation, automatic server onboarding for
SupportAssist Enterprise, and one-to-many management.
About Dell EMC OpenManage Enterprise 3.5
Dell EMC OpenManage Enterprise 3.5 is the newest version of the Dell EMC systems management and
monitoring console. With it, IT admins get a comprehensive view of Dell EMC PowerEdge servers as well as
any network-connected storage and network switches. In addition to the server lifecycle management tasks we
tested, Dell EMC notes that IT admins can use this console to:
• View and monitor device health
• Create custom alert policies and perform
automated actions
• Detect and rectify configuration anomalies
• Update firmware; Detect and rectify drift2
Automate high-touch server lifecycle management tasks March 2021 | 2

Automatic server-initiated discovery
When customers purchase servers, Dell EMC can provide each server’s unique credentials in advance, and
IT admins can import them before the servers arrive, setting themselves up for easier deployment. With
OpenManage Enterprise server-initiated discovery, all we had to do was upload a file containing the servers’
service tags and credentials. Once we uploaded the file, the server announced itself to OME, initiating the
discovery process required to manage the server.
With manual, network scan-based discovery, we had to enter the credentials and the known IP addresses of the
target systems and wait for the management console to connect with and complete the discovery process. While
you can perform bulk discovery jobs within a network segment, each server must use the same management
credentials—an impossibility if you’ve ordered your servers with secured unique credentials. Automatic server-
initiated discovery not only saves IT admins time and effort on day zero, but it could also potentially decrease
large-scale deployment time and reduce the chance for human error.
Next, we compared using OpenManage Enterprise profile deployment, which is template-based and assigned
to individual servers, to the time and effort needed to capture a profile from iDRAC, clone it, and redistribute
it to the other servers. Not only was the OME automated workflow faster, but we found OME profiles provided
portable configuration items and settings, so we could move workloads to another server with ease.
Figure 1: Time and effort required to find three servers with known IP addresses and deploy
template-based baseline server profiles. Source: Principled Technologies.
About Dell EMC OpenManage Enterprise Power Manager
According to Dell EMC, in addition to viewing, monitoring, and measuring power usage and server health, IT
admins can use this extension to control server power consumption through policy-based automations.3
Dell EMC OpenManage Enterprise server-initiated discovery and profile deployment Manual effort
Streamline
server
setup
Discover three servers and deploy server proﬁles on them
Time (mm:ss), lower is better
Steps, lower is better
0:56
3:31
13
17

Policy-based automation
For this comparison, we used OpenManage Enterprise Power Manager and OMISNOW to evaluate the
OpenManage Enterprise portfolio’s automatic event monitoring and service ticket tracking capabilities. There
was a one-time setup for the policy-based automation we created, which took 31 seconds and 7 steps. After
that, both workflows we discuss below were automated.
In our hands-on evaluation, the Power Manager plugin and ServiceNow integration made it easy to monitor a
temperature-based incident as well as proactively throttle power in a temperature-triggered EPR (Emergency
Power Reduction) test scenario. In our tests, OME automatically generated incident reports for human
follow-up. Once we fixed the problems, alerts on both consoles notified us that the incidents were resolved. By
implementing policy-based automations to set limits for power usage or throttle server power and performance
based on server temperature, IT admins can reduce the number of incidents they have to manage manually.
Table 1: Admin time and effort needed to monitor a temperature-based incident and create the incident resolution using
Power Manager with OMISNOW (after the one-time policy-based automation setup) and a manual event-monitoring and
incident creation method. Lower is better. Source: Principled Technologies.
Monitor and create incident resolutions Time (seconds) Steps
Power Manager with OMISNOW 0 0
Manual effort per incident 98 19
About OMISNOW
OpenManage Integration with ServiceNow (OMISNOW) acts
as a go-between for the OpenManage Enterprise console and
ServiceNow—transferring data between both platforms and
helping IT admins detect issues in less time.4

About SAE
Dell SupportAssist Enterprise (SAE) proactively detects hardware and software issues, notifies you about
the issue, and automatically generates a support request with server hardware logs to Dell EMC.5
In a
Principled Technologies report from September 2020, we found that ProSupport™
Plus with SupportAssist
reduced the amount of IT administrator involvement in drive failure resolution by up to 90 percent
compared to Basic Hardware Support (6 minutes vs. 30 minutes and 45 seconds).6
Automatic server onboarding for SupportAssist Enterprise
For this comparison, we used the SupportAssist Enterprise plugin versus the full, stand-alone version of
SupportAssist Enterprise. Both solutions can detect hardware issues and create cases for Dell technical
support. In our hands-on testing, the main difference between the two options was server onboarding.
The table below shows the time and steps it took using each approach to onboard a SupportAssist-
entitled server. We found that discovering and monitoring the server for actionable hardware issues
through the OME console with the SupportAssist plugin required zero additional steps and no
additional time when we checked the SupportAssist-entitled box during the automated server-initiated
discovery process.
By contrast, an IT admin using OME and the full version of SAE would have to switch over to the SAE
console and perform an additional discovery of the target server, which increases the onboarding time
for every server.
Table 2: Admin time and effort needed to onboard a SupportAssist-entitled server using the SAE plugin
(after server-initiated discovery) and the full version of SAE. Lower is better. Source: Principled Technologies.
Manual effort per server Time (seconds) Steps Single pane for easy management?
SAE plugin 0 0 Yes
SAE – full version 235 8 No

Centralized one-to-many management
For this comparison, we performed firmware updates on the three servers in our monitored group. By using the
OpenManage Enterprise one-to-many management capabilities on these important yet monotonous tasks, the
likelihood of human error decreases, and the likelihood of firmware updates happening on schedule increases.
Figure 2: Time and effort required to update firmware on three Dell EMC PowerEdge R740 servers.
Source: Principled Technologies.
Dell EMC OpenManage Enterprise Manual effort
Update ﬁrmware
Time (mm:ss), lower is better
Steps, lower is better
0:46
42:04
9
16
Time savings
that scale

Conclusion
We found that Dell EMC OpenManage Enterprise automations can free up costly admin
time for other urgent data center matters. Consider an organization that leverages the
server-initiated discovery feature, template-based server profile deployment, and one-
to-many server firmware updating capabilities we tested alongside single console event
management and hardware incident support that OMISNOW and SupportAssist plugins
enable. Based on our results, for a single server that receives monthly firmware updates and
has at least three events during a three-year period, our fictional organization would free up
approximately 25 hours and 26 minutes in IT admins time in a single server lifecycle, which
could translate to over $1,234 in server management cost savings if a Senior Systems Admin
is the one doing the manual labor.7

1 Dell Technologies, “Server-Initiated Discovery with OpenManage Enterprise 3.4,” accessed March 3, 2021, https://
downloads.dell.com/manuals/all-products/esuprt_software_int/esuprt_software_ent_systems_mgmt/dell-openmanage-
enterprise_white-papers15_en-us.pdf.
2 Dell Technologies, “Dell EMC OpenManage Enterprise Version 3.5 User’s Guide,” accessed February 9, 2021,
https://www.dell.com/support/manuals/en-us/dell-openmanage-enterprise/ome_3.5_ug/about-dell-emc-openmanage-
enterprise?guid=guid-72dc4319-05e8-4b62-902b-1b49a7a61488.
3 Dell, Support for Dell EMC OpenManage Enterprise Power Manager,” accessed February 10, 2021, https://www.dell.
com/support/kbdoc/en-us/000176254/support-for-dell-emc-openmanage-enterprise-power-manager-and-power-center.
4 Dell, “Support for Dell EMC OpenManage Integration with ServiceNow,” accessed February 10, 2021, https://www.dell.
com/support/kbdoc/en-us/000177827/support-for-dell-emc-openmanage-integration-with-servicenow.
5 Dell Technologies, “Dell EMC SupportAssist Enterprise 2.x – Guide and Download,” accessed March 1, 2021, https://
www.dell.com/support/kbdoc/en-us/000179530/dell-emc-supportassist-enterprise-2-x-guide-and-download#how.
6 Principled Technologies, “Minimize server support hassle using Dell EMC ProSupport Plus for Enterprise with Dell EMC
SupportAssist,” accessed March 2, 2021, https://www.principledtechnologies.com/Dell/ProSupport-Plus-SupportAs-
sist-vs-Basic-Hardware-Support-0920.pdf.
7 On March 3, 2021, the average pay for a Senior Systems Administrator in the U.S. was $48.54 per hour. ZipRecruiter,
“Senior Systems Administrator Salary,” accessed March 3, 2021, https://www.ziprecruiter.com/Salaries/Senior-Sys-
tems-Administrator-Salary.
Principled Technologies is a registered trademark of Principled Technologies, Inc.
All other product names are the trademarks of their respective owners.
For additional information, review the science behind this report.
Principled
Technologies®
Facts matter.®
Principled
Technologies®
Facts matter.®
This project was commissioned by Dell EMC.
Read the science behind this report at http://facts.pt/G0i5yNZ

Automate high-touch server lifecycle management tasks

More Related Content

What's hot (20)

Similar to Automate high-touch server lifecycle management tasks (20)

More from Principled Technologies (20)

Recently uploaded (20)

Automate high-touch server lifecycle management tasks