![REFERENCES
• [1]. Sinha, A., Singh, A., Singh, D., Singh, P., Maurya, A., Singh, M. K. (2017). "Automatic Room
Light Controller with Visitor Counter." International Journal on Emerging Technologies, vol. 8, no.
1, pp. 172-175.
• [2]. Adjardjah, W., Essien, G., & Ackar-Arthur, H. (2016). Design and Construction of a
Bidirectional Digital Visitor Counter. Computer Engineering and Intelligent Systems, 7(2), 50-67.
• [3]. Joshi, R. (2021, May). "Room Light Controller With Bidirectional Visitor Counter." Maker Pro.
Retrieved from https://maker.pro/arduino/projects/room-light-controller-with-bidirectional-
visitor-counter.
• [4]. Saddam. (2015, October). "Automatic Room Light Controller With Bidirectional Visitor
Counter Using Arduino." Circuit Digest. Retrieved from https://circuitdigest.com/microcontroller-
projects/automatic-room-light-controller-with-bidirectionalvisitor-counter-using-arduino.
• [5]. Dawson, R. (2001). Programming in ANSI C. Loughborough: Group D Publications.
• [6]. Mazidi, M. A., Mazidi, J. G., & McKinlay, R. D. (2005). The 8051 Microcontroller and
Embedded Using Assembly and C. National Cheng Kung University, TAIWAN: Pearson Prentice
Hall.](https://image.slidesharecdn.com/finalppt1-231228204134-a0eb0ccd/85/Automatic-Room-Light-Controller-with-Bidirectional-Visitor-Counter-10-320.jpg)
Automatic Room Light Controller with Bidirectional Visitor Counter
- 1. AUTOMATIC ROOM LIGHT CONTROLLER AND VISITOR COUNTER USING MICROCONTROLLER Paper Id: RP-ICABEC- 2023/23 Presented By: Amit Kumar 24 Aman kr Yadav 22 Amritraj Singh 27 Amit Kumar 25 Amritanshu Singh 30 5th International Conference (Hybrid) on Advances in AI for Biomedical Instrumentation, Electronics and Computing (ICABEC- 2023) Organized by Department of Electronics and Communication Engineering KIET Group of Institutions, Delhi-NCR, Ghaziabad
- 2. STATEMENT OF THE PROBLEM Electricity is one of the most important resources in this country, the electricity must be conserved, but many time people come outside the room/hall forgetting to turn off the lights/fan, therefore the electricity is wasted. The concept behind this project is to cut power supply when there is no one in the room, thus reducing energy consumption. AIMS : Limiting power waste in School, Colleges, Offices and Conference halls. Making a controller which means can sense if any person enters the room and light up automatically.
- 3. OBJECTIVES: • Incorporate transmitters, receivers and relay to detect the presence and absence of persons and do the switching automatically. • To design and construct an automatic room light controller with bidirectional visitor counter. • SIGNIFICANCE : This system will not only look at controlling the room light circuit, it will also help to know the number of persons in a room at a particular time.
- 4. COMPONENTS • Arduino UNO • Relay • Resistors • IR sensor module • 16 x 2 module • Bread Board • Connecting wires • LED • BC 547 Transistors
- 5. WORKING • 1 -> Design the Circuit: The first step is to design the circuit for the automatic room light controller and visitor counter. You can use Tinkercad's drag-and-drop interface to add components such as sensors, LEDs, and microcontrollers, and connect them together to form the circuit. • 2 -> Add the Sensors: Add sensors such as PIR (Passive Infrared) sensors to detect human presence, and LDR (Light Dependent Resistors) to detect the ambient light level. You can use these sensors to control the lights in the room automatically based on the presence and absence of people and the light level. • 3 -> Add the LED Lights: Add LED lights to the circuit, which will be controlled by the microcontroller. You can use a relay or transistor to switch the lights on and off based on the input from the sensors. • 4 -> Add the Visitor Counter: Add a visitor counter to the circuit, which will count the number of people entering and exiting the room. You can use a simple IR (Infrared) sensor or an ultrasonic sensor to detect the movement of people and count them. 5 -> Program the Microcontroller: Program the microcontroller to control the sensors, lights, and visitor counter. You can use Arduino.
- 6. 5 -> Program the Microcontroller: Program the microcontroller to control the sensors, lights, and visitor counter. You can use Arduino or other compatible microcontrollers and write the code in the Arduino IDE or other programming tools. 6 -> Test and Simulate: Once you have assembled the circuit and programmed the microcontroller, you can use Tinkercad's simulation tools to test and validate the behavior of the automatic room light controller and visitor counter. You can simulate different scenarios such as varying light levels, different numbers of people in the room, and different time periods to ensure that the system behaves as expected. 7 -> Deploy and Refine: Once you are satisfied with the behavior of the automatic room light controller and visitor counter, you can deploy it in a real- world application. You can monitor the system and refine it based on the feedback and performance data.
- 7. METHODOLOGY • The main goal of this paper is to come up with a model for a visitor counter. The system architecture is outlined in the figure below
- 8. CIRCUIT DIAGRAM ON TINKERCAD
- 9. ADVANCEMENT OF PROJECT • There are various ways to take the automatic room light controller and visitor counter to an advanced level. Here are some ideas: • 1 -> Use Machine Learning: You can use machine learning techniques to improve the accuracy of the visitor counter. For example, you can train a machine learning model to distinguish between different types of visitors, such as adults, children, or pets. This can help you to get a more accurate count and make more informed decisions based on the data. • 2 -> Integrate with Other Smart Home Devices: You can integrate the automatic room light controller and visitor counter with other smart home devices such as thermostats, security cameras, or voice assistants. This can create a more comprehensive and intelligent home automation system that can adapt to your preferences and needs. • 3 -> Incorporate IoT Technology: You can use IoT (Internet of Things) technology to connect the automatic room light controller and visitor counter to the internet. This can enable remote monitoring and control of the devices, as well as the ability to receive alerts and notifications based on the data collected.
- 10. REFERENCES • [1]. Sinha, A., Singh, A., Singh, D., Singh, P., Maurya, A., Singh, M. K. (2017). "Automatic Room Light Controller with Visitor Counter." International Journal on Emerging Technologies, vol. 8, no. 1, pp. 172-175. • [2]. Adjardjah, W., Essien, G., & Ackar-Arthur, H. (2016). Design and Construction of a Bidirectional Digital Visitor Counter. Computer Engineering and Intelligent Systems, 7(2), 50-67. • [3]. Joshi, R. (2021, May). "Room Light Controller With Bidirectional Visitor Counter." Maker Pro. Retrieved from https://maker.pro/arduino/projects/room-light-controller-with-bidirectional- visitor-counter. • [4]. Saddam. (2015, October). "Automatic Room Light Controller With Bidirectional Visitor Counter Using Arduino." Circuit Digest. Retrieved from https://circuitdigest.com/microcontroller- projects/automatic-room-light-controller-with-bidirectionalvisitor-counter-using-arduino. • [5]. Dawson, R. (2001). Programming in ANSI C. Loughborough: Group D Publications. • [6]. Mazidi, M. A., Mazidi, J. G., & McKinlay, R. D. (2005). The 8051 Microcontroller and Embedded Using Assembly and C. National Cheng Kung University, TAIWAN: Pearson Prentice Hall.
- 11. THANK YOU