Calling Connections, setting up Sametime (SUT Light) calls from Connections
4 likes1,706 views
The document discusses the integration of Sametime Unified Telephony Lite (SUT Lite) with IBM Connections, elaborating on capabilities, client requirements, and server configuration. It highlights limitations such as point-to-point calls only and the necessity for specific client versions. The document also provides instructions for enabling users and configuring SIP proxies for effective telephony integration.
Calling Connections, setting up Sametime (SUT Light) calls from Connections
- 1. Calling Sametime Adding telephony to IBM Connections ? Social Connections IV - 30/11/2012 - Amsterdam
- 2. Introduction What is SUT Lite Sametime and Connections SUT Lite and Connections
- 3. “What can I do with Sametime Unified Telefony Lite within IBM Connections”
- 4. Introduction What is SUT Lite Sametime and Connections SUT Lite and Connections
- 5. What is SUT Lite
- 6. Certified equipment http://www- 10.lotus.com/ldd/stwiki.nsf/dx/Sametime_Unified_Telephony_Lite_Int eroperability_Testing_Program
- 7. Architecture
- 8. Limitations • Only point-to-point calls • Only Sametime Connect Client is supported • Users cannot dial into a Sametime meeting • NAT traversal is not supported.
- 9. SUT vs. SUT Lite
- 10. Introduction What is SUT Lite Sametime and Connections SUT Lite and Connections
- 11. Awareness Server Based Using Sametime Proxy Server Client Based Using the Sametime Connect Client
- 12. Client requirements • Sametime Client 8.0.2 + • When using SSL: • Sametime Connect 8.5 + • Lotus Notes 8.5.1 + • Users must be logged into Sametime from the same machine as where they access Connections and with the same account
- 13. Check the Client
- 14. Server configuration • Open the file profiles-config.xml • Locate the sametimeAwareness element • Set enabled to true • Restart Profiles
- 15. The Result
- 16. Introduction What is SUT Lite Sametime and Connections SUT Lite and Connections
- 17. Start a call
- 18. Calling
- 19. “What can I do with Sametime Unified Telefony Lite within IBM Connections”
- 20. ?
- 21. Introduction What is SUT Lite Sametime and Connections SUT Lite and Connections Configuring SUT Lite
- 22. Configure the server • Install the SUT Lite license • Enable SUT Lite on the Media Manager from the System Console • Optional: disable encryption
- 23. Enable users • Enable SIP Trunk capability on the Media Manager policy
- 24. Dialplan Dial String SIP endpoint Phone/Device 3118255517X Sametime Sametime Softphone 316XXXXXXXX FreePBX PBX (soft)phone @mcu.silverside.nl MCU Media Server Video Conferencing
- 25. Configure the SIP Proxy • In the System Console open the configuration of the SIP Proxies and Registrars of the Media Server • Open the Proxy Administration
- 26. Define the rules Configure the conditions
- 27. Define the rules Set the destination
- 28. Define the rules Example: Route all calls where the SIP Request URI starts with “+316” to 192.168.0.214 via TCP
- 29. Define the rules Example: Route all incoming calls from 192.168.0.214 to the Media Manager via TCP.
- 30. ?