Camden 419W Instruction Manual
0 likes146 views
The document provides product details for the Camden CM-419 passive infrared request-to-exit motion detector. The detector is designed for indoor use at door thresholds for access control, door strike release, and alarm system applications. It has adjustable detection zones, sensitivity levels, and relay operation times. The detector operates on 12-24V DC or AC power and has a 3-year warranty against manufacturing defects.
Camden 419W Instruction Manual
- 1. 5151 Everest Drive, Unit #6 Mississauga, ON L4W 2Z3 Tel: 905-366-3377 Fax: 905-366-3378 Web Site: www.camdencontrols.com E-Mail: info@camdencontrols.com CM-419 Request to Exit Motion Detector (Indoor Use Only) PRODUCT DESCRIPTION The Camden CM-419 passive infared « request-to-exit » sensor is specifically designed for applications involving coverage at the threshold of a doorway. A number of field selectable options and adjustments make it a compatable choice for access control applications, door strike release and alarm system shunting. 1. PARTS DESCRIPTION
- 2. 2. CAUTIONS 3. DETECTION AREAS - 2 -
- 3. 4. INSTALLATION 5. WIRING - 3 -
- 4. 6.OPERATION AND FUNCTION 7. OPERATION CHECK (1) After wiring, set the LED to the on mode and check the operation. It takes aprox. 1 minute for warm up after turning the power on. (2) Confirm the detection zone by walk testing the unit. (3) Check the operation of the connected equipment. (4) If necessary, make fine adjustments. - 4 -
- 5. 8. TROUBLESHOOTING 9. SPECIFICATION PRODUCT NAME REX SENSOR (REQUEST TO EXIT SENSOR) DETECTION SYSTEM Passive Infrared MOUNTING HEIGHT 13 ft. (4m) Max PATTERN Single door or double door selectable ADJUSTMENT RANGE Wall mount : Vertically 35 Degrees (8 steps) Overhead mount : Vertically 20 degrees (5 steps) DETECTION AREA SENSITIVITY Adjustable POWER SUPPLY 12 to 24VDC (Non polarity) or -AC 20 to 24V use 12 to 24VAC (50Hz/60Hz) resister supplied POWER CONSUMPTION 40mA or less /DC 70mA or less /AC OUTPUT Dry contact relay 2C - 30V (DC) 1A or less / 125V (AC) 0.6A or less Operation : One Shot Hold time : Adjustable Approx. 0.25sec. to 60 sec. *Selectable relay operation LED Green Operation : Synchronous dry contact relay (LED )disabled WIRING CONNECTION Terminals TEMPERATURE RANGE +14 deg. F to +122 Deg. F (-10 Deg. C to +50 Deg. C) MOUNTING POSITION Wall ceiling, on or under frame (Indoor) WEIGHT 5.95 oz (170g) COVER White or Silver APPEARANCE WINDOW White ACCESSORIES • Tapping screws : 2 pc. • Resister (82ohms, 3W) : 1pcs for AC 20 to 24V • Cover locking screw : 1 pc. - 5 -
- 6. 10. EXTERNAL DIMENSIONS CAUTION • Follow the voltage of the indicated power supply and wiring instruction. Incorrect voltage and wiring may cause fire, electrical shock etc. • Do not connect equipment that exceeds the indicated output capacity. It may cause fire. • Do not modify this product. It may cause fire, electric shock etc. WARRANTY Camden Door Controls guarantees the CM- 419 to be free from manufacturing defects for 3 years from date of sale. If during the first 3 years the CM-419 fails to perform correctly, it may be returned prepaid to our factory where it will be repaired or replaced (at our discretion) without charge. Except as stated herein, Camden extends no warranties expressed or implied regarding function, performance or service. Questions ? Call us toll-free at : 1-877-226-3369 Filename: CM-419_new Instructions. ocd Revision Date: 12/01/2004 10:26 AM - 6 -