CNC1 (1).ppt

Motivation and uses
To manufacture complex curved geometries in 2D or 3D
was extremely expensive by mechanical means (which
usually would require complex jigs to control the cutter
motions)
Machining components with repeatable accuracy
Unmanned machining operations

Advantages of CNC
- Easier to program;
- Easy storage of existing programs;
- Easy to change a program
- Avoids human errors
- safer to operate
- Complex geometry is produced as cheaply as simple ones
- Usually generates closer tolerances than manual machines

Vertical Milling machine architecture
Conventional milling machines

Types of CNC machines
Based on Motion Type:
Point-to-Point or Continuous path
Based on Control Loops:
Open loop or Closed loop
Based on Power Supply:
Electric or Hydraulic or Pneumatic
Based on Positioning System
Incremental or Absolute

Basic CNC Principles
• Using a vertical mill
machining center as an
example, there are typically
three linear axes of motion.
Each is given an alphabetic
designation or address. The
machine table motion side
to side is called the “X”
axis. Table movement in
and out is the “Y” axis,
while head movement up
and down the column is the
“Z” axis.

Coordinates System
Absolute Coordinate System
Incremental Coordinate System

All computer controlled machines are able to accurately and
repeatedly control motion in various directions. Each of these
directions of motion is called an axis. Depending on the machine type
there are commonly two to five axes.
Additionally, a CNC axis may be either a linear axis in which movement
is in a straight line, or a rotary axis with motion following a circular
path.

If a rotary table is added to the machine table, then
the fourth axis is designated the “b” axis.

How CNC Works
• Controlled by G and M codes.
• These are number values and co-ordinates.
• Each number or code is assigned to a particular
operation.
• Typed in manually to CAD by machine
operators.
• G&M codes are automatically generated by the
computer software.

Features of CNC Machinery
• The tool or material moves.
• Tools can operate in 1-5 axes.
• Larger machines have a machine control unit
(MCU) which manages operations.
• Movement is controlled by a motors
(actuators).
• Feedback is provided by sensors (transducers)
• Tool magazines are used to change tools
automatically.

Tools
• Most are made from
high speed steel (HSS),
tungsten carbide or ceramics.
• Tools are designed to direct waste away from
the material.
• Some tools need coolant such as oil to protect
the tool and work.

Tool Paths, Cutting
and Plotting Motions
• Tool paths describes the route the cutting tool takes.
• Motion can be described as point to point, straight cutting or
contouring.
• Speeds are the rate at which the tool operates e.g. rpm.
• Feeds are the rate at which the cutting tool and work piece
move in relation to each other.
• Feeds and speeds are determined by cutting depth, material
and quality of finish needed. e.g. harder materials need slower
feeds and speeds.
• Rouging cuts remove larger amounts of material than finishing
cuts.
• Rapid traversing allows the tool or work piece to move rapidly
when no machining is taking place.

Manual NC programming
Part program: A computer program to specify
- Which tool should be loaded on the machine spindle;
- What are the cutting conditions (speed, feed, coolant ON/OFF etc)
- The start point and end point of a motion segment
- how to move the tool with respect to the machine.
Standard Part programming language: RS 274-D (Gerber, GN-code)

History of CNC
The RS274-D is a word address format
Each line of program == 1 block
Each block is composed of several instructions, or (words)
Sequence and format of words:
N3 G2 X+1.4 Y+1.4 Z+1.4 I1.4 J1.4 K1.4 F3.2 S4 T4 M2
sequence no
preparatory function
destination coordinates dist to center of circle
feed rate spindle speed
tool
Other function

Manual Part Programming Example
Tool size = 0.25 inch,
Feed rate = 6 inch per minute,
Cutting speed = 300 rpm,
Tool start position: 2.0, 2.0
Programming in inches
(4, 4)
(2, 2)
5”
p0
p1
p2
5”
2.5”
1”
45°
p3
p4
p5
Motion of tool:
p0  p1  p2  p3  p4  p5  p1  p0

Spindle CCW
(4, 4)
(2, 2)
5”
p0
p1
p2
5”
2.5”
1”
45°
p3
p4
p5
1. Set up the programming parameters
N010 G70 G90 G94 G97 M04
Programming in inches
Use absolute coordinates
Spindle speed in rpm
Feed in ipm

Flood coolant ON
(4, 4)
(2, 2)
5”
p0
p1
p2
5”
2.5”
1”
45°
p3
p4
p5
2. Set up the machining conditions
N020 G17 G75 F6.0 S300 T1001 M08
Machine moves in XY-plane
Feed rate
Tool no.
Spindle speed
Use full-circle interpolation

(4, 4)
(2, 2)
5”
p0
p1
p2
5”
2.5”
1”
45°
p3
p4
p5
3. Move tool from p0 to p1 in straight line
N030 G01 X3.875 Y3.698
Linear interpolation
target coordinates

(4, 4)
(2, 2)
5”
p0
p1
p2
5”
2.5”
1”
45°
p3
p4
p5
4. Cut profile from p1 to p2
N040 G01 X3.875 Y9.125
target coordinates
N040 G01 Y9.125
X-coordinate does not change  no need to program it
or

(4, 4)
(2, 2)
5”
p0
p1
p2
5”
2.5”
1”
45°
p3
p4
p5
5. Cut profile from p2 to p3
N050 G01 X5.634 Y9.125
target coordinates
1”
p3
.125
(x, y)
(6.5, 9)
y = 9 + 0.125 = 9.125
(6.5 - x)2 + 0.1252 = (1 - 0.125)2
x = 5.634

coordinates of center of circle
(4, 4)
(2, 2)
5”
p0
p1
p2
5”
2.5”
1”
45°
p3
p4
p5
6. Cut along circle from p3 to p4
N060 G03 X7.366 Y9.125 I6.5 J9.0
circular interpolation, CCW motion
target coordinates

(4, 4)
(2, 2)
5”
p0
p1
p2
5”
2.5”
1”
45°
p3
p4
p5
7. Cut from p4 to p5
N070 G01 X9.302
target coordinates (Y is unchanged)

(4, 4)
(2, 2)
5”
p0
p1
p2
5”
2.5”
1”
45°
p3
p4
p5
8. Cut from p5 to p1
N080 G01 X3.875 Y3.698
target coordinates (see step 3)

(4, 4)
(2, 2)
5”
p0
p1
p2
5”
2.5”
1”
45°
p3
p4
p5
9. Return to home position, stop program
N090 G01 X2.0 Y2.0 M30
end of data
target coordinates (see step 3)
N100 M00
program stop

CNC Programming Basics
• CNC instructions are called part program commands.
• When running, a part program is interpreted one command line
at a time until all lines are completed.
• Commands, which are also referred to as blocks, are made up
of words which each begin with a letter address and end with a
numerical value.

CNC Programming Basics
• Each letter address relates to a specific machine function. “G”
and “M” letter addresses are two of the most common. A “G”
letter specifies certain machine preparations such as inch or
metric modes, or absolutes versus incremental modes.
• A “M” letter specifies miscellaneous machine functions and
work like on/off switches for coolant flow, tool changing, or
spindle rotation. Other letter addresses are used to direct a
wide variety of other machine commands.

CNC programming
Important things to know:
• Coordinate System
• Units, incremental or absolute positioning
• Coordinates: X,Y,Z, RX,RY,RZ
• Feed rate and spindle speed
• Coolant Control: On/Off, Flood, Mist
• Tool Control: Tool and tool parameters

• Programming consists of a series of instructions in form of letter codes
• Preparatory Codes:
• G codes- Initial machining setup and establishing operating conditions
• N codes- specify program line number to executed by the MCU
• Axis Codes: X,Y,Z - Used to specify motion of the slide along X, Y, Z
direction
• Feed and Speed Codes: F and S- Specify feed and spindle speed
• Tool codes: T – specify tool number
• Miscellaneous codes – M codes For coolant control and other activities
CNC programming

Programming Key Letters
• O - Program number (Used for program identification)
• N - Sequence number (Used for line identification)
• G - Preparatory function
• X - X axis designation
• Y - Y axis designation
• Z - Z axis designation
• R - Radius designation
• F – Feed rate designation
• S - Spindle speed designation
• H - Tool length offset designation
• D - Tool radius offset designation
• T - Tool Designation
• M - Miscellaneous function

Explanation of commonly used G
codes
• G00 – Preparatory code to control final position of the tool and
not concerned with the path that is followed in arriving at the
final destination.
• G01 – Tool is required to move in a straight line connecting
current position and final position. Used for tool movement
without any machining- point to point control. (linear
interpolation)
• G02 – Tool path followed is along an arc specified by I, J and
K codes.( circular interpolation)

Table of Important G codes
G00 Rapid Transverse
G01 Linear Interpolation
G02 Circular Interpolation, CW
G03 Circular Interpolation, CCW
G17 XY Plane,G18 XZ Plane,G19 YZ Plane
G20/G70 Inch units
G21/G71 Metric Units
G40 Cutter compensation cancel
G41 Cutter compensation left
G42 Cutter compensation right
G43 Tool length compensation (plus)
G43 Tool length compensation (plus)
G44 Tool length compensation (minus)
G49 Tool length compensation cancel
G80 Cancel canned cycles
G81 Drilling cycle
G82 Counter boring cycle
G83 Deep hole drilling cycle

Table of Important M codes
• M00 Program stop
• M01 Optional program stop
• M02 Program end
• M03 Spindle on clockwise
• M04 Spindle on counterclockwise
• M05 Spindle stop
• M06 Tool change
• M08 Coolant on
• M09 Coolant off
• M10 Clamps on
• M11 Clamps off
• M30 Program stop, reset to start

Optimum machine programming requires consideration of certain
machine operating parameters including:
• Positioning control
• Compensations
• Special machine features
Positioning control is the ability to program tool and machine slide
movement simultaneously along two or more axes. Positioning may be
for point-to-point movement or for contouring movement along a
continuous path. Contouring requires tool movement along multiple axes
simultaneously. This movement is referred to as “Interpolation” which is
the process of calculating intermediate values between specific points
along a programmed path and outputting those values as a precise
motion. Interpolation may be linear having just a start and end point
along a straight line, or circular which requires an end point, a center and
a direction around the arc.
Program Command Parameters

Rules for programming
Block Format
N135 G01 X1.0 Y1.0 Z0.125 F5
Sample Block
• Restrictions on CNC blocks
• Each may contain only one tool move
• Each may contain any number of non-tool move G-codes
• Each may contain only one feed rate
• Each may contain only one specified tool or spindle speed
• The block numbers should be sequential
• Both the program start flag and the program number must be
independent of all other commands (on separate lines)
• The data within a block should follow the sequence shown
in the above sample block

APT Programming Example
Cylindrical Part
F
25
F
22.5
F
17.5
20
Raw Material
Finished Part
70
30

APT Programming Example (Cylindrical Part)
O0013
N0005 G53
N0010 T0303
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
N0040 G00 Z2.0
N0050 X50.0 Z50.0
N0060 T0404
N0070 G57 G00 X22.50 Z2.0 S500
N0080 G01 Z-30.0 F100
N0090 G00 X23.0 Z2.0 S500
N0100 G84 X17.5 Z-20.0 D0=200 D2=200 D3=650
N0110 G00 Z2.0
N0120 X50.0 Z50.0
N0130 M30

APT Program Interpretation
O0013
Program identification number

O0013
N0005 G53
To cancel any previous working zero point

O0013
N0005 G53
N0010 T0303
N0010 Sequence number
T0303 Select tool number 303

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.0 Z0.0 S500 M04
G57 To set the working zero point as saved
G00 Rapid movement (no cutting)
X26.0 X location (as a diameter; 13 form zero)
Z0.0 Z location
S500 Spindle speed is 500 rpm
M04 Rotate spindle counterclockwise
x
z
(0,0) +ve
+ve

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
G01 Linear interpolation (cutting)
X-0.20 Move only in x direction until you pass
the center by 0.1 mm (facing)
F100 Set feed rate to 100 mm/min.

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
N0040 G00 Z2.0
G00 Move rapidly away from work piece (no cutting)
Z2.0 the movement is 2 mm away from the face.

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
N0040 G00 Z2.0
N0050 X50.0 Z50.0
Go to a safe location away from the
workpiece [x = 50 (25 from zero), z = 50] to
change the tool.

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
N0040 G00 Z2.0
N0050 X50.0 Z50.0
N0060 T0404
T0404 Select tool number 404

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
N0040 G00 Z2.0
N0050 X50.0 Z50.0
N0060 T0404
N0070 G57 G00 X22.50 Z2.0 S500
G57 PS0
G00 Rapid movement (no cutting)
X22.50 X location (as a diameter; 11.25 form zero)
Z2.0 Z location
S500 Spindle speed is 500 rpm

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
N0040 G00 Z2.0
N0050 X50.0 Z50.0
N0060 T0404
N0070 G57 G00 X25.00 Z2.0 S500 M04
N0080 G01 Z-30.0 F100
G01 Linear interpolation (cutting)
Z-30 Move only in z direction (external turning)
F100 Set feed rate to 100 mm/min.

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
N0040 G00 Z2.0
N0050 X50.0 Z50.0
N0060 T0404
N0070 G57 G00 X25.00 Z2.0 S500 M04
N0080 G01 X22.5 Z-70.0 F100
N0090 G00 X23.0 Z2.0 S500
G00 Move rapidly away from work piece (no cutting) to
location x= 23.0 (11.50 from zero) and z = 2.0.

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
N0040 G00 Z2.0
N0050 X50.0 Z50.0
N0060 T0404
N0070 G57 G00 X25.00 Z2.0 S500 M04
N0080 G01 X22.5 Z-70.0 F100
N0090 G00 X26.0 Z2.0 S500
N0100 G84 X17.5 Z-20.0 D0=200 D2=200 D3=650
G84 Turning cycle for machining the step
X17.5 final diameter
Z-20 length of step is 20 mm
D0=200 Finish allowance in X direction (0.2 mm) D2=200 Finish
allowance in Z direction (0.2 mm)
D3=650 Depth of cut in each pass (0.65 mm)

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
N0040 G00 Z2.0
N0050 X50.0 Z50.0
N0060 T0404
N0070 G57 G00 X25.00 Z2.0 S500 M04
N0080 G01 X22.5 Z-70.0 F100
N0090 G00 X26.0 Z2.0 S500
N0100 G84 X17.5 Z-20.0 D0=200 D2=200 D3=650
N0110 G00 Z2.0
G00 Move rapidly away from workpiece (no cutting)
Z2.0 the movement is 2 mm away from the face.

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
N0040 G00 Z2.0
N0050 X50.0 Z50.0
N0060 T0404
N0070 G57 G00 X25.00 Z2.0 S500 M04
N0080 G01 X22.5 Z-70.0 F100
N0090 G00 X26.0 Z2.0 S500
N0100 G84 X17.5 Z-20.0 D0=200 D2=200 D3=650
N0110 G00 Z2.0
N0120 X50.0 Z50.0
X50.0 Z50.0 Move to the tool changing location

O0013
N0005 G53
N0010 T0404
N0020 G57 G00 X26.00 Z0.0 S500 M04
N0030 G01 X-0.20 F100
N0040 G00 Z2.0
N0050 X50.0 Z50.0
N0060 T0404
N0070 G57 G00 X25.00 Z2.0 S500 M04
N0080 G01 X22.5 Z-70.0 F100
N0090 G00 X26.0 Z2.0 S500
N0100 G84 X17.5 Z-20.0 D0=200 D2=200 D3=650
N0110 G00 Z2.0
N0120 X50.0 Z50.0 T00
N0130 M30
M30 Program End

Programming Example
Raw Material Finished Part

Programming Example
G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X-8 Y0 Z-0.5 ZFeed 150
N005 G01 X70 Y0 Z-0.5 XYFeed 75
N006 G01 X70 Y60 Z-0.5 XYFeed 75
N007 G01 X30 Y60 Z-0.5 XYFeed 75
N008 G01 X0 Y40 Z-0.5 XYFeed 75
N009 G01 X0 Y0 Z-0.5 XYFeed 75
N010 G81 R3 E9 N7 Z-0.5
N011 M05
N012 M02
x
y

Programming Example
Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X20 Y15 Z10 XYFeed 150 ZFeed 150
N005 G01 X20 Y15 Z-10 ZFeed 75
N006 G01 X20 Y15 Z10 ZFeed 150
N007 G01 X50 Y15 Z10 ZFeed 150
N008 G01 X50 Y15 Z-10 ZFeed 75
N009 G01 X50 Y15 Z10 ZFeed 150
N010 G01 X50 Y45 Z10 ZFeed 150
N011 G01 X50 Y45 Z-10 ZFeed 75
N012 G01 X50 Y45 Z10 ZFeed 150
N013 M05
N014 M02
x
y

Program Interpretation
G55 X200 Y80
Setting the datum to the lower left corner of the work piece

G55 X200 Y80
Program 1
Program Identification Number

G55 X200 Y80
Program 1
N001 M06 T1
N001 Sequence Number
M06 Tool Change (End Mill with
Diameter=12mm
T1 Tool Number

G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
Start rotating the spindle clockwise with 400
rpm

G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
Go to Safe Position with feed 150mm/min

G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X-8 Y0 Z-0.5 ZFeed 150
Lower the end mill to determine the depth of
cut

G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X-8 Y0 Z-0.5 ZFeed 150
N005 G01 X70 Y0 Z-0.5 XYFeed 75
Move from the lower left corner
of the work piece to the right
lower one cutting with
feed=75mm/min

G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X-8 Y0 Z-0.5 ZFeed 150
N005 G01 X70 Y0 Z-0.5 XYFeed 75
N006 G01 X70 Y60 Z-0.5 XYFeed 75
Move from the lower left corner of the
work piece to the right lower one
cutting with feed=75mm/min

G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X-8 Y0 Z-0.5 ZFeed 150
N005 G01 X70 Y0 Z-0.5 XYFeed 75
N006 G01 X70 Y60 Z-0.5 XYFeed 75
N007 G01 X30 Y60 Z-0.5 XYFeed 75
Cutting the horizontally up to
X=30

G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X-8 Y0 Z-0.5 ZFeed 150
N005 G01 X70 Y0 Z-0.5 XYFeed 75
N006 G01 X70 Y60 Z-0.5 XYFeed 75
N007 G01 X30 Y60 Z-0.5 XYFeed 75
N008 G01 X0 Y40 Z-0.5 XYFeed 75
Cutting to X=0 & Y=40

G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X-8 Y0 Z-0.5 ZFeed 150
N005 G01 X70 Y0 Z-0.5 XYFeed 75
N006 G01 X70 Y60 Z-0.5 XYFeed 75
N007 G01 X30 Y60 Z-0.5 XYFeed 75
N008 G01 X0 Y40 Z-0.5 XYFeed 75
N009 G01 X0 Y0 Z-0.5 XYFeed 75
Complete the countering

G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X-8 Y0 Z-0.5 ZFeed 150
N005 G01 X70 Y0 Z-0.5 XYFeed 75
N006 G01 X70 Y60 Z-0.5 XYFeed 75
N007 G01 X30 Y60 Z-0.5 XYFeed 75
N008 G01 X0 Y40 Z-0.5 XYFeed 75
N009 G01 X0 Y0 Z-0.5 XYFeed 75
N010 G81 R3 E9 N7 Z-0.5
Repeat 7 times blocks from N003 to N009
with incremental offset of Z=-0.5

G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X-8 Y0 Z-0.5 ZFeed 150
N005 G01 X70 Y0 Z-0.5 XYFeed 75
N006 G01 X70 Y60 Z-0.5 XYFeed 75
N007 G01 X30 Y60 Z-0.5 XYFeed 75
N008 G01 X0 Y40 Z-0.5 XYFeed 75
N009 G01 X0 Y0 Z-0.5 XYFeed 75
N010 G81 R3 E9 N7 Z-0.5
N011 M05
Spindle Off

G55 X200 Y80
Program 1
N001 M06 T1
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X-8 Y0 Z-0.5 ZFeed 150
N005 G01 X70 Y0 Z-0.5 XYFeed 75
N006 G01 X70 Y60 Z-0.5 XYFeed 75
N007 G01 X30 Y60 Z-0.5 XYFeed 75
N008 G01 X0 Y40 Z-0.5 XYFeed 75
N009 G01 X0 Y0 Z-0.5 XYFeed 75
N010 G81 R3 E9 N7 Z-0.5
N011 M05
N012 M02
End Program

Tool Change
Changing the tool

Tool Change
G55 X200 Y80
Setting the datum to the lower left corner of the work piece

Tool Change
G55 X200 Y80
Program 2
Program Identification Number

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N001 Sequence Number
M06 Tool Change (Drill with
Diameter=6mm
T2 Tool Number

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
Start rotating the spindle clockwise with 400
rpm

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
Go to Safe Position with feed 150mm/min

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
Stop above the center of the first hole

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X20 Y15 Z10 XYFeed 150
ZFeed 150
N005 G01 X20 Y15 Z-10 ZFeed 75
Start Drill the first hole

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N005 G01 X20 Y15 Z-10 ZFeed 75
N006 G01 X20 Y15 Z10 ZFeed 150
Retract to a position above the hole

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N005 G01 X20 Y15 Z-10 ZFeed 75
N006 G01 X20 Y15 Z10 ZFeed 150
N007 G01 X50 Y15 Z10 ZFeed 150
Stop above the center of the second hole

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N004 G01 X20 Y15 Z10 XYFeed 150 ZFeed
150
N005 G01 X20 Y15 Z-10 ZFeed 75
N006 G01 X20 Y15 Z10 ZFeed 150
N007 G01 X50 Y15 Z10 ZFeed 150
N008 G01 X50 Y15 Z-10 ZFeed 75
Drill the second hole

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N005 G01 X20 Y15 Z-10 ZFeed 75
N006 G01 X20 Y15 Z10 ZFeed 150
N007 G01 X50 Y15 Z10 ZFeed 150
N008 G01 X50 Y15 Z-10 ZFeed 75
N009 G01 X50 Y15 Z10 ZFeed 150
Retract to a position above the second hole

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N005 G01 X20 Y15 Z-10 ZFeed 75
N006 G01 X20 Y15 Z10 ZFeed 150
N007 G01 X50 Y15 Z10 ZFeed 150
N008 G01 X50 Y15 Z-10 ZFeed 75
N009 G01 X50 Y15 Z10 ZFeed 150
N010 G01 X50 Y45 Z10 ZFeed 150
Stop above the center of the third hole

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N005 G01 X20 Y15 Z-10 ZFeed 75
N006 G01 X20 Y15 Z10 ZFeed 150
N007 G01 X50 Y15 Z10 ZFeed 150
N008 G01 X50 Y15 Z-10 ZFeed 75
N009 G01 X50 Y15 Z10 ZFeed 150
N010 G01 X50 Y45 Z10 ZFeed 150
N011 G01 X50 Y45 Z-10 ZFeed 75
Drill the third hole

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N005 G01 X20 Y15 Z-10 ZFeed 75
N006 G01 X20 Y15 Z10 ZFeed 150
N007 G01 X50 Y15 Z10 ZFeed 150
N008 G01 X50 Y15 Z-10 ZFeed 75
N009 G01 X50 Y15 Z10 ZFeed 150
N010 G01 X50 Y45 Z10 ZFeed 150
N011 G01 X50 Y45 Z-10 ZFeed 75
N012 G01 X50 Y45 Z10 ZFeed 150
Retract to a position above the third hole

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N005 G01 X20 Y15 Z-10 ZFeed 75
N006 G01 X20 Y15 Z10 ZFeed 150
N007 G01 X50 Y15 Z10 ZFeed 150
N008 G01 X50 Y15 Z-10 ZFeed 75
N009 G01 X50 Y15 Z10 ZFeed 150
N010 G01 X50 Y45 Z10 ZFeed 150
N011 G01 X50 Y45 Z-10 ZFeed 75
N012 G01 X50 Y45 Z10 ZFeed 150
N013 M05
Spindle off

Tool Change
G55 X200 Y80
Program 2
N001 M06 T2
N002 M03 rpm 400
N003 G01 X-8 Y0 Z0 XYFeed 150
N005 G01 X20 Y15 Z-10 ZFeed 75
N006 G01 X20 Y15 Z10 ZFeed 150
N007 G01 X50 Y15 Z10 ZFeed 150
N008 G01 X50 Y15 Z-10 ZFeed 75
N009 G01 X50 Y15 Z10 ZFeed 150
N010 G01 X50 Y45 Z10 ZFeed 150
N011 G01 X50 Y45 Z-10 ZFeed 75
N012 G01 X50 Y45 Z10 ZFeed 150
N013 M05
N014 M02
End Program

Two computer-based systems which impact the use of CNC technology are
computer aided design and computer aided manufacturing.
A computer aided design, or CAD, system uses computers to graphically create
product designs and models. These designs can be reviewed, revised, and
refined for optimum end use and application. Once finalized, the CAD design is
then exported to a computer aided manufacturing, or CAM, system.
CAM systems assist in all phases of manufacturing a product, including process
planning, production planning, machining, scheduling, management and quality
control.
CAD/CAM

Automatic Part Programming
Software programs can automatic generation of CNC data
Make 3D model
Define Tool
CNC data
Simulate
cutting

Automatic part programming and DNC
Very complex part shapes  very large NC program
NC controller memory may not handle HUGE part program
computer feeds few blocks of
NC program to controller
When almost all blocks executed,
controller requests more blocks

Summary
CNC machines allow precise and repeatable control in machining
CNC lathes, Milling machines, etc. are all controlled by NC programs
NC programs can be generated manually, automatically
Additional references: RS274D code descriptions

CNC1 (1).ppt

More Related Content

Similar to CNC1 (1).ppt (20)

More from WondererBack (13)

Recently uploaded (20)

CNC1 (1).ppt