Computer conversions products_catalog
0 likes195 views
This document describes various products for converting between analog angular position signals and digital values, including synchro/resolver to digital converters, digital to synchro/resolver converters, encoders that provide both absolute and incremental position outputs, and related accessories like indicators and simulators. The products come in a variety of form factors from small modules to rack-mounted systems and support different resolutions, accuracy levels, and interface options.
Computer conversions products_catalog
- 1. PCI-SYNCHRO™ Series Synchro - Resolver - Ac LVDT I/O PC Compatible ISA Bus Cards Synchro - Resolver - Ac LVDT I/O VME Bus Cards Synchro - Resolver - Ac LVDT I/O 4 to 8 Channel PC104 Bus Cards Synchro - Resolver - Ac LVDT I/O STD BUS One to two Channel cards, any function per card. Lowest cost I/O Bus. High/Low Byte priority Selectable. Double Buffered Outputs. Terminal Blocks or Mil spec. connectors on I/O. Synchro Amplifiers and High Power Digital to Synchro Converters Multispeed High Accuracy Angle Indicators Input: 11.8V/90V rms. L-L, 47 to 10,000 Hz. Ref.: 26V/115V rms. & 115V 60 Hz. power. Speed Ratio: 1,8,10,16,18,32,36,64, & 128. Output: 5 or 6 digit .5” LED display (unipolar or bipolar) and 5 or 6 digit BCD digital data (optional). Accuracy: +/-.002, +/-.005, or +/-.01 degree. 1 of 5 Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 2. Package: a.) 9.5” x 8” x 2” H. b.) 19” x 12” x 3.5” H. Options: Choice of scale factor, other speed ratios, watchdog timer, tristate, binary, and BCD output data simultaneously, dimmer. Programmable Limit Switch Series PLS1000 Input: Single, Multiturn or Linear Resolver.. Resolution: Field Scalable to 1 part in 4096/turn Outputs: 16 & 1 fault, field select TTL or DC to 50V, Solid State and Electromechanical relay boards. Display: 8 character and status LEDs Speed: 5 us throuput fully loaded, 3000 RPM. Functions: Hi/Low set points, dwells, timers, tach, cycle count, RS232 I/O, force outputs, offsets, 5 speed advance. Memory: Nonvolatile EEPROM 10-100 programs, serial buffer. Size: 7.4”x6.2”x4.5” panel mount or 14”x12”x10” Nema 13. Shaft Tracker™ Absolute & Incremental Outputs. No External Electronics, Ultra-Reliable electromagnetic encoder with Real-time Incremental Quadrature Square & Serial/Shifted Absolute Position Data in one. Resolution: 1024-4096 parts/turn. Nema 12, Size 25 std. Flange Mount. Single +5VDC, or 10-30VDC power-in. Isolated Multidrop RS485 Differential outputs. Replaces Disposable Opticals. MultiTurn Shaft Tracker™ Same features as above. Available -40degree C to +85 degree C and Military Grade Extended Temperature -55 degree C to +105 degree C. 4 to 128 turn variations. Resolution: up to 22 bits. Snaptrak™ Encoders Resolution 100 to 65,536 parts/turn. Basic full function system, =12 or +15VDC power in, buffered 5v TTL or Open Collector 5-30VDC logic outputs. All digital output formats, BIN, BCD, Gray Code, Absolute & Incremental available. Remote offset Option DC Snaptrak units feature analog 0-10VDC, +/-10VDC, and 4-20ma. current loop outputs. +12 or 24VDC power in. High reliability electromagnetic (no wear) pot replacers. 1000’ long cables. Rotary differentials available too. Track II™ Encoders Value added system, 24VDC power in, field selectable 5, 15, or 24VDC logic level outputs. Opto-Isolated PLC Handshake, Position status LEDs & Remote Zero set Std. BCD, Binary, Gray Code outputs, Incremental output option. Rotary differentials & Limit Switch available. Resolution: 4096 parts/turn Multitrak™ Encoders Multiturn absolute encoder systems. Resolution 65,536 representing 1-128 turns full absolute range of travel. All features Std. +24VDC power in, field selectable 5, 15, or 24VDC logic level outputs, binary data, Opto-Isolated PLC handshakes for data latch, watchdog, and multiplex enable. Real-time incremental outputs too. Status LEDs & remote zero set. Built in test & cable disconnect. 2 of 5 Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 3. Synchro / Resolver Simulators Input: Up to 18 bits digital parallel binary or 6 digits BCD, or manual 6 digit thumb wheel switches. Power: 115V 60 Hz. Output: 11.8V or 90V rms. L-L 47 to 10,000 Hz. capable of driving up to 25 VA loads. Dynamic Range: .125 to 16 rps/ Display: 5 or 5 digit .5”H LED of input or output angle. Accuracy: +/- .002, +/-.005, or +/-.01 degrees. Package: Bench mount 12”x13”x3.25”H, or Portable case 9”x12”x12” (splash proof). Options: Multispeed synchro input and bus card interface. Multiturn Absolute Encoder Systems and Readouts Convert 1 to 1024 turns of shaft rotation input into 1,000 to 4,194,304 unique position locations. These true absolute encoders that retain their position information forever, regardless of any motion during a power outage. TMDS-PC Series: PC card 4.5”x6.5” & 64, 128, or 1024 turn position transducer, resolution 1024 to 16,384 parts/turn. Buffered +5VDC TTl logic, parallel binary formats, three state & data latch control lines, separated dual data ports opt. +12 or +15VDC power. TMSAI Series: 5 digit scaled panel mount LED readout, 9.5”Wx2.5”Hx8”D and with a size 23 Nema 12 transducer. Scaled BCD output & 16 bit binary output. 10, 36, 64, 100, 128 turns. 115VAC power. TMRE-CIM Series: (shown) 1 million part full function readout system, 10,000 parts/turn, 100 turns full range, excellent for rack & pinion systems, adjustable datum point, push button offsets, 5-30VDC BCD outputs, 115VAC power. TMDS Series: 2-1024 turns, Resolution 100 to 65,536 per turn. Outputs optional 4,5, or 6 digit scaled readouts, operator offset options, panel or rack mount decoders. BCD, binary, analog, gray code, RS232/422/485 serial, pulse width or bus compatible outputs, units with incremental & absolute outputs, multichannel systems too! Multiturn Transducers available in: Small size 23, heavy duty NEMA 12-4, IP65, explosion proof, water tight, submersibles, motor tach & multiturn resolver assemblies. Radiation resistant units to 1x109 Rads. Series AI540 Low Cost Angle Indicator Input: 11.8/90V RMS. L-L, 47 to 10,000 Hz. Reference: 26/115V RMS Power: 115V 60 Hz. Output: 3, 4, or 5 Digit .5” H LED Display (Unipolar or Bipolar) Accuracy: +/-3, +/-6, or +/-30 minutes of arc, +/-1 LSB Package: (A) 5.5”Wx7.5”Lx2.0”H panel mount (DC supplies included) (B) 9.5”Wx1.75”H half rack mounting (DC supplies included) Options: Choice of scale factors, Zero offset adjustment (+/-5 degrees) 3 of 5 Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 4. Transformer Isolated Multiplexed Synchro to Digital Converter - Series MSI Input: 11.8/90V RMS. L-L, 47 to 10,000 Hz. Reference: 26/115V RMS., up to 128 channels Output: 14 Bits parallel binary or 4 decade BCD Accuracy: +/-4.6 minutes of arc +/-5LSB. Package: (A) Central Converter 2.6”x3.1”x43”H module (B) Four channel input module 2.6”x3.1”x43”H module Options: (A) Scale Factor Choice on BCD output. (B) Linear DC output. (C) System mounted on PC boards or racks High Accuracy Synchro to Digital - Series USD Input: 11.8/90V RMS. L-L, 47 to 10,000 Hz. Reference: 26/115V RMS. (optional) Output: 20 bits parallel binary Accuracy: +/-.005 Degrees Package: 2.6”x3.1”x.8H module Options: 6 digit BCD output High Accuracy Digital to Resolver - Series UDR Input: 18 bits parallel binary and 26/115V 47 to 10,000 Hz. reference Output: 7V rms., 60 or 400 Hz, capable of driving 2k ohm load Accuracy: +/-.005 Degrees Package: 2.6”x3.1”x.8H module Options: 1.) 6 digit BCD output 2.) Separate power amplifier modules Multispeed Synchro to Digital in one Module Series SDT Input: 11.8/90V RMS. L-L, 47 to 10,000 Hz., 26/115V rms. reference Speeds: 10, 16, 18, 32, 36, 64 Output: 16 bits parallel binary and velocity Accuracy: +/-.01 or +/-.005 Degrees Package: One 2.6”x3.1”x.82H module Options: (A) Systems packaged on PC cards and racks (B) 6 Digit Display Miniature Synchro/Resolver to Digital Series HSDC Input: 11.8/90V RMS. L-L, 47 to 10,000 Hz., 26/115V rms. reference Output: 16, 14, or 12 bits parallel binary Accuracy: +/-2, +/-4, or +/-8.5 minutes or arc Package: (A) 2.23”x.78”x.6”H module (B) 1.1”x2.1”x.7”H module (C) 1.9”x2.1”x.4”H Transformer Isolation Available Miniature Synchro to Resolver Converters (Scott T Transformers) Series - ST Input: 11.8/90V RMS. L-L, 47 to 10,000 Hz., 26/115V rms. reference (optional) 4 of 5 Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com
- 5. Output: 6V or 2V rms. Accuracy: +/-1, +/-2, +/-4 minutes of arc Package: 1.3”x1.3”x.4”H Compatible with all Monolithic Resolver to Digital Converters Reference Powered Digital to Synchro/Resolver Series DSP Input: 14 or 12 bits parallel binary and 115V rms. reference 47 to 10,000 Hz. Output: 90V L-L 47 to 10,000 Hz. capable of driving 4.5 VA. Accuracy: +4 minutes of arc Package: 2.6”x3.1”x.82”H No external transformer required Digital to Synchro/Resolver Series DSC Input: 10 to 16 bits parallel binary and 26/115V rms. reference Output: 11.8/90V rms. L-L, 47 to 10,000 Hz. capable of driving 1VA, 2VA, 5VA (up to 3 TRS) or 25VA loads. Accuracy: 2 to 30 arc minutes Package: (A) 2.6”x3.1”x.6”H (B) 2.6”x3.1”x.82”H (C) PC card with edge connector (5VA and 25VA units) Vector Generator - Series DVG Input: 14 or 18 bits parallel binary, Reference 10VDC or 7V rms., and power +/-15VDC Output: +/-10VDC sine & cosine, DC to 10,000 Hz., 2K ohms minimum load Reference Output: 10VDC Accuracy: to +/-10 arc seconds Package: 2.6”x3.1”x.43”H module Option: Dynamic Vector Rotators with programmable acceleration & decelerations HSDC/HRDC Series Isolated Synchro/Resolver to digital converters with built-in test and force test 5 of 5 Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com