Computing transformations
Download as PPTX, PDF2 likes3,469 views
The document discusses various transformations that can be applied to variables in SPSS to satisfy assumptions of normality, homogeneity of variance, and linearity. It describes logarithmic, square root, inverse, and square transformations and how to compute them in SPSS. Adjustments may need to be made to variable values depending on minimum/maximum values and distribution skew. The document provides examples of computing each transformation for a variable measuring time spent online.
Computing transformations
- 1. Computing Transformations BY TARUNGEHLOT Transforming variables Transformations for normality Transformations for linearity
- 2. Transforming variables to satisfy assumptions When a metric variable fails to satisfy the assumption of normality, homogeneity of variance, or linearity, we may be able to correct the deficiency by using a transformation. We will consider three transformations for normality, homogeneity of variance, and linearity: the logarithmic transformation the square root transformation, and the inverse transformation plus a fourth that is useful for problems of linearity: the square transformation
- 3. Computing transformations in SPSS In SPSS, transformations are obtained by computing a new variable. SPSS functions are available for the logarithmic (LG10) and square root (SQRT) transformations. The inverse transformation uses a formula which divides one by the original value for each case. For each of these calculations, there may be data values which are not mathematically permissible. For example, the log of zero is not defined mathematically, division by zero is not permitted, and the square root of a negative number results in an “imaginary” value. We will usually adjust the values passed to the function to make certain that these illegal operations do not occur.
- 4. Two forms for computing transformations There are two forms for each of the transformations to induce normality, depending on whether the distribution is skewed negatively to the left or skewed positively to the right. Both forms use the same SPSS functions and formula to calculate the transformations. The two forms differ in the value or argument passed to the functions and formula. The argument to the functions is an adjustment to the original value of the variable to make certain that all of the calculations are mathematically correct.
- 5. Functions and formulas for transformations Symbolically, if we let x stand for the argument passes to the function or formula, the calculations for the transformations are: Logarithmic transformation: compute log = LG10(x) Square root transformation: compute sqrt = SQRT(x) Inverse transformation: compute inv = 1 / (x) Square transformation: compute s2 = x * x For all transformations, the argument must be greater than zero to guarantee that the calculations are mathematically legitimate.
- 6. Transformation of positively skewed variables For positively skewed variables, the argument is an adjustment to the original value based on the minimum value for the variable. If the minimum value for a variable is zero, the adjustment requires that we add one to each value, e.g. x + 1. If the minimum value for a variable is a negative number (e.g., –6), the adjustment requires that we add the absolute value of the minimum value (e.g. 6) plus one (e.g. x + 6 + 1, which equals x +7).
- 7. Example of positively skewed variable Suppose our dataset contains the number of books read (books) for 5 subjects: 1, 3, 0, 5, and 2, and the distribution is positively skewed. The minimum value for the variable books is 0. The adjustment for each case is books + 1. The transformations would be calculated as follows: Compute logBooks = LG10(books + 1) Compute sqrBooks = SQRT(books + 1) Compute invBooks = 1 / (books + 1)
- 8. Transformation of negatively skewed variables If the distribution of a variable is negatively skewed, the adjustment of the values reverses, or reflects, the distribution so that it becomes positively skewed. The transformations are then computed on the values in the positively skewed distribution. Reflection is computed by subtracting all of the values for a variable from one plus the absolute value of maximum value for the variable. This results in a positively skewed distribution with all values larger than zero.
- 9. Example of negatively skewed variable Suppose our dataset contains the number of books read (books) for 5 subjects: 1, 3, 0, 5, and 2, and the distribution is negatively skewed. The maximum value for the variable books is 5. The adjustment for each case is 6 - books. The transformations would be calculated as follows: Compute logBooks = LG10(6 - books) Compute sqrBooks = SQRT(6 - books) Compute invBooks = 1 / (6 - books)
- 10. The Square Transformation for Linearity The square transformation is computed by multiplying the value for the variable by itself. It does not matter whether the distribution is positively or negatively skewed. It does matter if the variable has negative values, since we would not be able to distinguish their squares from the square of a comparable positive value (e.g. the square of -4 is equal to the square of +4). If the variable has negative values, we add the absolute value of the minimum value to each score before squaring it.
- 11. Example of the square transformation Suppose our dataset contains change scores (chg) for 5 subjects that indicate the difference between test scores at the end of a semester and test scores at mid-term: -10, 0, 10, 20, and 30. The minimum score is -10. The absolute value of the minimum score is 10. The transformation would be calculated as follows: Compute squarChg = (chg + 10) * (chg + 10)
- 12. Transformations for normality Both the histogram and the normality plot for Total Time Spent on the Internet (netime) indicate that the variable is not normally distributed. Histogram 50 Normal Q-Q Plot of TOTAL TIME SPENT ON THE IN 3 40 2 1 30 0 20 Expected Normal -1 Frequency 10 Std. Dev = 15.35 -2 Mean = 10.7 N = 93.00 -3 0 -40 -20 0 20 40 60 80 100 120 0.0 20.0 40.0 60.0 80.0 100.0 10.0 30.0 50.0 70.0 90.0 Observed Value TOTAL TIME SPENT ON THE INTERNET
- 13. Determine whether reflection is required Descriptives Stat istic Std. Error TOTAL TIME SPENT Mean 10.73 1.59 ON THE INTERNET 95% Confidence Lower Bound 7.57 Interval for Mean Upper Bound 13.89 5% Trimmed Mean 8.29 Median 5.50 Variance 235. 655 Std. Deviation 15.35 Minimum 0 Maximum 102 Range 102 Interquartile Range 10.20 Skewness 3.532 .250 Kurt osis 15.614 .495 Skewness, in the table of Descriptive Statistics, indicates whether or not reflection (reversing the values) is required in the transformation. If Skewness is positive, as it is in this problem, reflection is not required. If Skewness is negative, reflection is required.
- 14. Compute the adjustment to the argument Descriptives Stat istic Std. Error TOTAL TIME SPENT Mean 10.73 1.59 ON THE INTERNET 95% Confidence Lower Bound 7.57 Interval for Mean Upper Bound 13.89 5% Trimmed Mean 8.29 Median 5.50 Variance 235. 655 Std. Deviation 15.35 Minimum 0 Maximum 102 Range 102 Interquartile Range 10.20 Skewness 3.532 .250 Kurt osis 15.614 .495 In this problem, the minimum value is 0, so 1 will be added to each value in the formula, i.e. the argument to the SPSS functions and formula for the inverse will be: netime + 1.
- 15. Computing the logarithmic transformation To compute the transformation, select the Compute… command from the Transform menu.
- 16. Specifying the transform variable name and function First, in the Target Variable text box, type a name for the log transformation variable, e.g. “lgnetime“. Third, click on the up arrow button to move the highlighted function to Second, scroll down the list of functions to the Numeric find LG10, which calculates logarithmic Expression values use a base of 10. (The logarithmic text box. values are the power to which 10 is raised to produce the original number.)
- 17. Adding the variable name to the function Second, click on the right arrow button. SPSS will replace the highlighted text in the function (?) with the name of the variable. First, scroll down the list of variables to locate the variable we want to transform. Click on its name so that it is highlighted.
- 18. Adding the constant to the function Following the rules stated for determining the constant that needs to be included in the function either to prevent mathematical errors, or to do reflection, we include the constant in the function argument. In this case, we add 1 to the netime variable. Click on the OK button to complete the compute request.
- 19. The transformed variable The transformed variable which we requested SPSS compute is shown in the data editor in a column to the right of the other variables in the dataset.
- 20. Computing the square root transformation To compute the transformation, select the Compute… command from the Transform menu.
- 21. Specifying the transform variable name and function First, in the Target Variable text box, type a name for the square root transformation variable, e.g. “sqnetime“. Third, click on the up arrow button to move the highlighted function to the Numeric Second, scroll down the list of functions to Expression find SQRT, which calculates the square root text box. of a variable.
- 22. Adding the variable name to the function Second, click on the right arrow button. SPSS will replace the highlighted text in the function (?) with the name of the variable. First, scroll down the list of variables to locate the variable we want to transform. Click on its name so that it is highlighted.
- 23. Adding the constant to the function Following the rules stated for determining the constant that needs to be included in the function either to prevent mathematical errors, or to do reflection, we include the constant in the function argument. In this case, we add 1 to the netime variable. Click on the OK button to complete the compute request.
- 24. The transformed variable The transformed variable which we requested SPSS compute is shown in the data editor in a column to the right of the other variables in the dataset.
- 25. Computing the inverse transformation To compute the transformation, select the Compute… command from the Transform menu.
- 26. Specifying the transform variable name and formula First, in the Target Variable text box, type a Second, there is not a function for name for the inverse computing the inverse, so we type transformation variable, the formula directly into the e.g. “innetime“. Numeric Expression text box. Third, click on the OK button to complete the compute request.
- 27. The transformed variable The transformed variable which we requested SPSS compute is shown in the data editor in a column to the right of the other variables in the dataset.
- 28. Adjustment to the argument for the square transformation It is mathematically correct to square a value of zero, so the adjustment to the argument for the square transformation is different. What we need to avoid are negative numbers, since the square of a negative number produces the same value as the square of a positive number. Descriptives Stat istic Std. Error TOTAL TIME SPENT Mean 10.73 1.59 ON THE INTERNET 95% Confidence Lower Bound 7.57 Interval for Mean Upper Bound 13.89 5% Trimmed Mean 8.29 Median 5.50 Variance 235. 655 Std. Deviation 15.35 Minimum 0 Maximum 102 Range 102 Interquartile Range 10.20 In this problem, the minimum value is 0, no adjustment Skewness 3.532 .250 is needed for computing the square. If the minimum Kurt osis 15.614 .495 was a number less than zero, we would add the absolute value of the minimum (dropping the sign) as an adjustment to the variable.
- 29. Computing the square transformation To compute the transformation, select the Compute… command from the Transform menu.
- 30. Specifying the transform variable name and formula First, in the Target Variable text box, type a Second, there is not a function for name for the inverse computing the square, so we type transformation the formula directly into the variable, e.g. Numeric Expression text box. “s2netime“. Third, click on the OK button to complete the compute request.
- 31. The transformed variable The transformed variable which we requested SPSS compute is shown in the data editor in a column to the right of the other variables in the dataset.