Con ed project-based-learning--model

Project-based Learning Model

ucation I
d

ns

titute

Pa cific E

Relevant Learning for the 21st Century


du

cation

I

ns
titute

Pa cific E

Relevant Learning for the 21st Century

Developed By
Pacific Education Institute
Margaret Tudor, Ph.D.
Lynne Ferguson
Co-Executive Directors

Developed for
Association of Fish and
Wildlife Agencies’
North American
Conservation Education
Strategy

Funded by a
Multistate Grant of the
Sport Fish and Wildlife
Restoration Program

Written by
Erica Baker, Breanna Trygg, Patricia Otto, Margaret Tudor, Ph.D. and Lynne Ferguson
Pacific Education Institute
2011
Project-based Learning Model, Relevant Learning for the 21st Century,
©Pacific Education Institute, 2011, www.pacificeducationinstitute.org

Layout and Design: GoodCatnapping@gmail.com

Acknowledgments
The following organizations provided support for
Project-based Learning Model, Relevant Learning for the 21st Century:
Sport Fish and Wildlife Restoration Program
Association of Fish and Wildlife Agencies

(AFWA) North American Conservation Education Strategy

AFWA North American Conservation Education Committees
Working Group:

K-12 Committee:
(*participating on K-12 and Working Group Committees)

Gregg Losinski, Idaho Department of Fish and
Game

Carrie Morgan, Wisconsin DNR
Leslie Burger, Mississippi State University

Lucy Moreland (retired), Arkansas Game and Fish
Commission

Lisa Flowers, Boone and Crockett Club

Judy Gillan, Florida Fish and Wildlife Conservation
Commission

Mary Kay Salwey, Wisconsin DNR
Michelle Kelly, Minnesota DNR

Judy Stokes, New Hampshire Fish and Game
Department

Natalie Elkins, Michigan DNR
Theresa Alberici, Pennsylvania Game Commission

Kevin Frailey, Michigan DNR

Justin Marschell, Oklahoma Department of Wildlife
Conservation

Cindy Etgen, Maryland DNR
Jeff Rawlinson, Nebraska Game and Parks
Commission

Barb Gigar*, Iowa DNR
Kellie Tharp*, Arizona Game and Fish Commission

Warren Gartner, Indiana Division of Fish and
Wildlife

Judy Silverberg*, New Hampshire Fish and Game
Department

Thomas Baumeister, Montana Fish, Wildlife and
Parks

Suzie Gilley*, Virginia Department of Game and
Inland Fisheries
Margaret Tudor*, Washington Department of Fish
and Wildlife, Pacific Education Institute

Project-based Learning Model, Relevant Learning for the 21st Century was made possible by the
Pacific Education Institute and University of Washington’s Dr. Catherine Taylor facilitating multiple
stakeholders to develop Environmental Education Frameworks that describe the expected student
performance through projects. The integration of systems thinking was facilitated by the valuable
insight of Nalani Linder. We would like to give a special thanks to all of the Washington State
educators (formal and non-formal) and students who provided us the opportunity to refine this model
through their hands on involvement with projects to improve their local environments.
Visionaries at the Washington Department of Fish and Wildlife, including Michael O’Malley,
Watchable Wildlife Program Manager and Rocky Beach, Wildlife Diversity Program Manager.
The Board of Directors of the Pacific Education Institute, consisting of leaders in the formal education
sector and natural resource agencies and organizations, recognized the need to provide guidelines for
field studies. Their support was essential to making the Project-based Learning Model a reality.
Margaret Tudor, Ph.D.
Executive Director, Pacific Education Institute

Table of Contents
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Science and Engineering Practices . . . . . . . . . . . . . . . . . . . . . . . . . 2
Project-Based Learning Model Overview . . . . . . . . . . . . . . . . . . . . 4
Project Journals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Documentation of Sources: The Annotated Bibliography . . . . . . . . . 6
Step 1: Describe the Ecosystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Step 2: Determine and define the Problem . . . . . . . . . . . . . . . . . . . . 15
Step 3: Research the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Step 4: Stakeholder Description . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Step 5: Propose Possible Solutions . . . . . . . . . . . . . . . . . . . . . . . . . 28
Step 6: Develop a Plan: Identify, Plan and Reflect on Your Project . . . . . 35
Step 7: Implement the Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Step 8: Summarize, Evaluate and Reflect . . . . . . . . . . . . . . . . . . . . . 41
Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Appendix A: Distinguishing Practices in Science from
Those in Engineering: Framework for K-12 Science
Education (NRC, 2011) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Appendix B: Preparing Students to Conduct Field Investigations . . . . . 49
Appendix C: What is a Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Appendix D: Change Over Time Activity . . . . . . . . . . . . . . . . . . . . . . 61

ii

Project-based Learning Model: Relevant Learning for the 21st Century

Introduction

Introduction

The Pacific Education Institute’s Project-Based Learning Model
engages students in relevant learning that positively impacts their local
communities and ecosystems. Teachers or mentors facilitate, rather than
direct, students as they explore a system, ask questions, look at problems
within that system, determine solutions, plan and ultimately implement a
project.
Through the Pacific Education Institute’s Project-Based Learning Model,
students take ownership for their learning, structure and organize an
action project, and inform others about an environmental issue. In other
words, students become empowered and educated citizens of the 21st
century.
The projects themselves can be pre-determined by an educator or can be
completely determined by the students. For example, a teacher or mentor
may have the funding and/or desire to work with students to design and
install a rain garden on the school campus. Or the educator may know
he or she would like to conduct a project on the school campus, but does
not know what project would have the greatest impact on the students
and the environment. Either way, the teacher and students collaborate
as they work through the Project-Based Learning Model process. The
result is a student-guided service learning project that involves students
in the technological design process while building and enhancing
content knowledge, problem solving abilities, systems thinking and
communication skills.
PEI’s Project Based Learning Model aligns with the Framework for K-12
Science Education that emphasizes scientific and engineering practices
using cross-cutting concepts (e.g. patterns, stability and change, systems)
to apply science to disciplinary core ideas. In the Project-based Learning
Model, the disciplinary core ideas of focus are the macro-worlds of Life
Sciences and Earth Sciences. In addition, the model provides a framework
that facilitates curriculum integration, environment-oriented action
projects, and opportunities for students to showcase their achievements. It
encourages systems thinking skills—such as seeing the big picture, looking
for interdependencies within a system, and considering both short- and
long-term consequences of actions—all of which are critical for effectively
dealing with the complex and interconnected issues in our environment
today (Environmental Education Framework, 2001).
In order to explain some of the steps, we used the example of constructing
a rain garden. When you see references to rain gardens, use as a guide to
inform your project.


Science and Engineering Practices
The Project-Based Learning Model applies science and engineering
practices to address a problem of a human need or want. The Framework
for K-12 Science Education describes the three human enterprises of
science, technology and engineering in the following way:
Technology is any modification of the natural world made to fulfill
human needs or desires. (NAS, 2011)
Engineering is a systematic and often iterative approach to
designing objects, processes, and systems to meet human needs
and wants. (NAS, 2011)
An application of science is any use of scientific knowledge for a
specific purpose, whether to do more science: to design a product,
process, or medical treatment, to develop a new technology; or to
predict the impacts of human actions. (NAS, 2011)
Students engaging in the science and engineering design process need
to follow a set of engineering practices that engineers use as they design
and build systems. The National Academy of Sciences uses the term
“practices” instead of skills to emphasize that students need not only skill
but also knowledge that is specific to each practice. Students need to be
engaged directly in these scientific and engineering practices in order to
fully understand how to apply scientific knowledge to problems through
engineering solutions. The science and engineering practices essential for
K-12 science and engineering (see Appendix A for full description) are:
(NAS, 2011)
1. Asking questions (for science) and defining problems (for engineering)
2. Developing and using models
3. Planning and carrying out investigations
4. Analyzing and interpreting data
5. Using mathematics, information and computer technology, and
computational thinking.
6. Constructing explanations (for science) and designing solutions (for
engineering)
7. Engaging in argument from evidence.
8. Obtaining, evaluating, and communicating information.
The Project-based Learning Model provides a scaffold or structure for
students to engage in each of these practices by taking the steps to develop
and implement a project.



This structure provides students a process to follow to design
investigations, helping them learn how to observe, design, determine
variables to measure, plus record and evaluate data using appropriate
tools and instruments. For example, in middle school, students can apply
their scientific knowledge of ecology concepts to solve problems related
to a school garden through engineering design (NRC, 2011 3017). In high
school students can undertake more complex engineering design projects
that address major local, national and global issues (NRC, 2011).
The Frameworks (NRC, 2011) expect students to write accounts of their
work, using journals to record observations, thoughts, ideas and models.
In addition, students in scientific investigation and applying science
through engineering are encouraged to create diagrams, sketches and
models and represent data and observations with plots and tables, plus
written text, to communicate detailed plans in the journals. Students
need access to complex texts, such as technical reports and scientific and
technological/engineering literature on the Internet. Students developing
engineering projects need to develop systems thinking and systems
models, that support critical steps in developing, sharing, testing and
refining design ideas. Teachers can use the “Sustainable Tomorrow: A
Teachers’ Guidebook for Applying Systems Thinking to Environmental
Education Curricula for Grades 9-12” to develop the habits of systems
thinking and model, through graphic representations of behavior over
time, input and output flow, and causal loops showing negative and
positive feedback, using mathematical thinking.

PEI’s Project-based Learning Model

The Pacific Education Institute’s
Project-Based Learning Model Overview
Through PEI’s Project-Based Learning Model, students:
Role of Teachers
Step 1: Describe the Ecosystem
Describe the biological, geological, and physical properties of the
local ecosystem and how it interacts with and connects to the larger
system.
Step 2: Define the Problem
Identify a local problem that involves the system.
Curriculum Integration

Step 3: Research the Problem
Gain deeper insight into the problem while establishing criteria for
measuring a solution’s effectiveness in addressing the problem.
Step 4: Understand Stakeholders
Identify the perspectives, interests and positions of the major groups
and individuals that may influence or be impacted by the problem
and/or potential solutions.
Step 5: Determine Possible Solutions
Determine and compare solutions in relation to possible impacts,
stakeholder perspectives, limitations and feasibility.
Step 6: Develop a Plan
Work collaboratively to develop a plan to solve the problem - identify
required resources and steps needed for implementation, and reflect
on the potential outcomes of the solution.

Action Projects
Stewardship

Step 7: Implement the Plan
Carry out the plan in collaboration with others, and keep records of the
process and results.
Step 8: Summarize, Evaluate and Reflect
Evaluate, reflect upon and communicate the plan’s results, including
intended and unintended consequences, and its effectiveness based on
the criteria for success.

Showcase Project


Project Journals

Project Journals
As each student works through his/her project, whether he/she is working
with the class, a small group or individually, the Journal serves as a means
of project organization. Any materials or resources used, as well as any
hard-copy document produced, should be placed in this journal. Providing
project guidelines, including the journal layout, helps students learn
valuable organization skills, while ensuring all components of a project are
completed.
Upon completion, the journal then becomes a student portfolio that
communicates the progression and depth of a project, as well as a means
for showcasing student work.

Recommended Layout
Work with students to obtain a 3-ring binder and create a title page for
the project journal (including project name, student name, school, mentor
name and affiliation, and dates).
The contents of the journal can be organized into sections (dividers) using
the steps of the Project Based Learning Model:
Ecosystem Description
The Problem*
Stakeholders
Possible Solutions
Project Plan
Plan Implementation
Evaluation/Reflection
Bibliography
* The Problem section combines Step 2: Define the Problem and Step 3:
Research the Problem.

Documentation of Sources

Documentation of Sources: The Annotated
Bibliography
In the professional world, documentation of resources for any published
work is a necessity. Ensuring that students record information in their
own words has always been a challenge for teachers. With the advent of
the Internet, the copy and paste means of gathering information is all too
common. Frequently, students fail to note the source, much less check to
see if the source is valid and reliable.
Combined with teacher guidance and classroom discussions about the
assessment of sources, the compilation of an annotated bibliography
ensures that each student not only determines general statistics about
sources, such as the author and date, but also the quality and value of
information presented. Looking closer at documents and webpages used
for research helps students develop heightened awareness about the types,
quality and potential bias of sources and the information presented within
those sources.
For younger students, a simple bibliography can be required, particularly
if the teacher provides the websites and/or written materials for
students to utilize during research and project preparations. However, a
discussion about how to analyze and determine the quality of sources is
recommended.


Documentation of Sources

Student Page:

Annotated Bibliography

Collect and record information for ALL of the sources you access throughout your project. This includes
web pages, magazines, books, newspapers and even people you interview. The Annotated Bibliography will
be placed at the back of your Project Journal.

Follow the criteria below:
• Format may be in either APA (American Psychological Association) or MLA (Modern Language
Association) format.
• Include at least 10 sources.

• Cite sources from a variety of formats. Include at least three different types.








Books
Magazines/scientific journals
Movies/documentaries
On-line/electronic sources*
Pamphlets or brochures
Personal interviews
Newspaper articles or editorials

• Annotation:
Following each citation (author, title, etc.) add a short paragraph (between 50 and 100 words) that:
 Summarizes the information found within the source.
 Describes the usefulness of the source to your project. (If it is useful, describe how it is useful. If not,
explain why it is not useful.)
* Be sure you accurately determine the author of a webpage or web-based document. The web-hosting
company is not necessarily the author.

Step 1 | Describe the Ecosystem

Step 1: Describe the Ecosystem

Practices in Science and Engineering
2. Develop and Using Models
See Appendix A

Whether a project is pre-determined or to-be-determined (as discussed in
the Introduction), students must understand the ecosystem in which they
will be working. Through the Ecosystem Description, students visit and
explore a site to make observations about the components and interactions
taking place within that system. During this process, students not only
gain insight into the potential problems at that site, but also develop
a frame of reference which is further developed as students conduct
additional research on the Internet, in a library or in the classroom.
Before exploring a site, teachers can provide specific background
information (and even mention the pre-determined project, if desired) or
simply show the students a digital map of the site, utilizing Geographic
Information Systems (GIS) resources such as Google Maps, Google Earth
or even ArcGIS, so that they develop a general understanding of the site
and the surrounding area.*
Additionally, a teacher or mentor may wish to revise the Ecosystem
Description Notes document prior to the Ecosystem Description field
experience to ensure students make more specific observations related to
a particular topic or issue. For example, if a teacher has pre-determined
that she would like her students to design and install a rain garden (the
project), the student observations would include a focus on finding areas
of standing water, saturated ground and large non-pervious surfaces.
While visiting a site with their teacher or a guest expert, students are
given the opportunity to explore the area and thoroughly describe their
observations and predictions related to changes over time (Step 1 Student
Page (A): Ecosystem Description Notes) either independently or with a
small team. Additionally, they are encouraged to ask questions** related
to their observations (Step 1 Student Page (B): Ecosystem Questions). To
further enhance student observations in the field, each student also creates
a simple technical drawing that communicates both his/her observations
of the components and interactions he/she observes within that ecosystem
(Step 1 Student Page (C): Sketch and Label Your Ecosystem).
After the site visit, students conduct further research about the
components of the Ecosystem, possibly adding more complex components
such as the Nutrient Cycles and/or Energy Transfers and Transformations,
if desired. Additionally, students are encouraged to find the answers to
some of their questions, if possible.



The final product of the Ecosystem Description can be a collection of
field notes and drawings, a formal write up describing the ecosystem
(components and interactions), a Changes over Time graph and/or a
detailed technical drawing that depicts the components and interactions
in that system.

* See Landscape Investigation Guide, (PEI 2011)
**For more information related to types of questions and how to guide
students to ask quality questions, see Appendix B or Field Investigation
Guide – Section 2, Parts 1 and 2 (PEI, 2007).

What is causing the squishy, muddy area next to the basketball
court?
When is there standing water or muddy ground next to the
court?
Where do the birds go if they can’t make nests at our school?
How can we stop the wearing down of the grass?
Note: During Ecosystem Description research, teachers may need to
remind students to record all the sources they use for research on their
Annotated Bibliographies.

Student Page:

Step 1 INSTRUCTIONS

Step 1: Ecosystem Description Instructions
1. Write down your observations on the Step 1 Student Page (A): Ecosystem Description Notes
page.
• Use all of your senses to observe and describe the vegetation (plants), animals, water,
human impacts and topography/geology at your site.
• Be sure to include any observations about how these features affect each other and/or your
site, or how your site affects the features.
2. Write down the questions you think of while making observations on the Step 1 Student Page
(B): Ecosystem Questions.
3. Continue making observations and asking questions until all of the components of the
Ecosystem Description have been described.
4. Then, find a place to sit.
5. Draw and label a picture on the Step 1 Student Page (C): Sketch and Label your Ecosystem
page that shows the features, or components, of the site, as well as any connections or
interactions between the features.
6. Then think about what the area will look like in the future. Below your sketch, be sure to:
• Choose one feature you have observed, such as the trees, birds or buildings.
• Write about what might change and what might stay the same.
(For example, a student is observing an area that has a playground with old equipment and a
number of puddles. The student decides to predict how the puddles might change over time.
The student writes that in 1 year, the site will have 4 more puddles. In 10 years, the puddles will
have merged into a single, shallow puddle. And in 100 years, the single puddle will grow wider
and deeper - becoming more like a pond.)
7. When you are done, follow your teacher’s instructions.

10



Student Page (A) EXAMPLE:

Step 1. Ecosystem Description Notes
Name

Ollie Observer

Location and Date:

PGS Elementary, 4/11/2010

1. Vegetation – what types, quantity, invasive species, etc.
A Douglas fir tree has caused cracks in the sidewalk along side Mr. M’s class because
one of its roots is trying to grow through it. One scotch broom growing by the back
fence. 3 Cherry trees, 4 Douglas fir trees
2. Animals – species, status, diversity, etc.
Swallow nests up under the edges of the roof that keep being knocked down. Birds
spotted: 2 Stellar’s jays, 4 juncos, 6 crows, and 3 swallows. Lots of ants. Dog walking on
front sidewalk.
3. Water – sources, locations, currents, etc.

A big area next to the basketball court is “mushy” and muddy with large puddles. 10
puddles on playground

4. Human impacts – settlements/activities and technologies being used/behaviors
The students have created a trail between Portable A and B where no grass can grow.
The basketball court is in the middle of a big grassy area. The school has roads on all 4
sides and a big parking lot on one side.
5. Topography/Geology – elevation, formation history, features, etc.

The school is not in the mountains, but is on a slight hill with some low spots on the
playground and near the basketball court. The school dirt is clay with some gravel.

6. How does this ecosystem interact with/connect to your local environment?
The water that comes off of our sidewalks and parking lots goes into drains at the
edge of the school property. This water goes into a creek and to the Puget Sound

7. Do you notice any situations that should be dealt with in the ecosystem or things that are affecting the
ecosystem? Be specific.

The squishy ground and standing water next to the basketball court might need to be dealt
with. There are no places for birds to put their nests. Also, there isn’t much habitat for
animals. I’d love to see a garden somewhere. Kids seem to be wearing down a path in the grass
(so there’s only dirt) next to the C building

11

Step 1. Student Page (A):

Ecosystem Description Notes
Name

Location and Date:

1. Vegetation – what types, quantity, invasive species, etc.

2. Animals – species, status, diversity, etc.

3. Water – sources, locations, currents, etc.

4. Human impacts – settlements/activities and technologies being used/behaviors

5. Topography/Geology – elevation, formation history, features, etc.

6. How does this ecosystem interact with/connect to your local environment?

7. Do you notice any situations that should be dealt with in the ecosystem or things that are affecting the
ecosystem? Be specific.

12



Step 1. Student Page (B):

Ecosystem Questions
As you make observations and research the components of the ecosystem, record any questions
you may have in the space below.
Think about:
• sources (Who___? or What___? or Where___?)
• causes (How___?)
• effects or impacts (What would happen if___?)
• reasons (Why___?)
• timing (When___?)
• numbers (How many___?)
• or any other question you think about.

13

14

In 100 years:

In 10 years:

In 1 year:

Choose one feature of this site (such as the trees, birds, buildings, etc.). Predict what it might be like in the future. Be sure to
think about what might stay the same and what might change.

Location and Date

Name:


Step 1. Student Page (C):

Sketch and Label Your Ecosystem
Once you have explored the site, find a place to sit, draw and label an image
that shows the components and interactions you observed in that ecosystem.


Step 2 | Determine and Define the Problem

Step 2: Determine and Define the Problem
1. Asking Questions Defining Problems
See Appendix A

The term problem has a variety of definitions and connotations. Most
likely, when students hear the word problem, they assume something is
wrong. However, in the case of Project-Based Learning, the problem is
simply a challenge that can be solved through the design process, a series
of steps used to design and solve a problem. In other words, the problem is
the purpose or reason for a project.

Examples of Problems:
• Building a bridge
• Decreasing a certain type
of pollution in a stream
• Constructing a more
aerodynamic car
• Reducing erosion
• Attracting birds to a site
• Installing a rain garden
• Increasing the production
of a garden
• Reducing animal damage
on crops
• Getting rid of (or
preventing the growth of )
non-native and/or invasive
plants
• Determining the
population and/or
distribution of an animal
population
• Constructing a new soccer
field that will not flood

Prior to Step 2, teachers or mentors must first work with students to
define the term problem in the context of Project-Based Learning. (For
the activity: What is a Problem? see Appendix C.) This process clarifies
student misconceptions and provides students with examples to build
from as they begin to determine their potential projects.
Once the term problem has been defined, the teacher or mentor works
with students through Step 2 to either:

1. Clearly define the problem for a pre-selected project. (See Version 1)
or
2. Determine and define a problem by looking through the Ecosystem
Description observations and conducting further research or
investigations as needed. (See Version 2)

Version 1: Determining the Problem for an Existing Project
If the project is already known, the teacher or mentor works with students
as they revisit their observations (Step 1: Ecosystem Description) related
to the project topic. Through a discussion of these observations the
teacher can introduce key concepts and explain the project focus.
In the example of an existing project to design and install a
rain garden (discussed in Step 1: Ecosystem Description), the
teacher or mentor works with students as they look through
their observations related to stormwater: areas of standing water,
saturated ground, and large non-pervious surfaces. Through a
discussion of observations, the teacher introduces the concepts of
stormwater runoff and rain gardens and explains that the students’
project will focus on designing and installing a rain garden on the
school campus.
The students then define the problem by writing a clear problem
statement. This statement will be entered on the Step 3 Student Page A:
Researching the Problem document.
Example: Design and install a rain garden that will reduce
stormwater runoff.

15


Note: Throughout the
process of Determine and
Define a Problem, students
continually revisit their
Ecosystem Description
documents - writing new
observations in the appropriate
sections, collecting data on
any investigation forms and
continuing to write down
questions they have about
their observations. Posting
observations and data, as
well as creating a classroom
“parking lot” for questions,
validates and encourages
students to think inquisitively
as they investigate a site.

Version 2: Determining a Problem at a Site
If the project is already known, the teacher or mentor works with students
as they revisit their observations (Step 1: Ecosystem Description) related
to the project topic. Through a discussion of these observations the
teacher Version 2: Determining a Problem at a Site
Other times, a teacher or mentor may not have a project in mind. The
students must determine a problem and, eventually, a project.
In this instance, as students review their Ecosystem Descriptions, they
must collaborate and communicate with one another while sorting and
evaluating their observations and questions to determine a problem (see
Step 2 Student Page: Determine the Problem). Through this process,
students may realize that one or more problems are obvious or that further
observations of the site and/or a field investigation related to the site may
be needed before they can clearly define a problem. For an idea of what
this process could look like in the classroom, please see the example below.
Returning to the example of the school campus observations,
students review their Step 1 Student Page (A): Ecosystem
Description Notes pages, they discover that a number of students
wrote observations about the area of the schoolyard right next
to the basketball court that was “mushy” and muddy with large
puddles. Additionally, several students recorded questions related
to the standing water. As a result, the class may determine that the
area next to the basketball court is too wet and muddy.
The students (with teacher guidance) then work to clearly define
the problem as: Reduce the standing water (creating the mud)
in the area next to the basketball court.
However, in some situations, not all students agree on a problem.
In the schoolyard example, some students believe that a lack of
habitat/nesting areas is also a problem. At this point, the teacher
encourages the class to come to a consensus or allows several
projects to take place. If a group of students cannot decide as to
which problem should become their project, further research and/
or observations of the site should take place. Frequently, a class
may also need to vote to determine the “top problem.”
In some cases, students may not believe that any problems exist.
The teacher or mentor must provide the students with focused
questions or have the students return to the site to record more
specific observations until students have enough information to
determine a problem for their project.
Returning to the example of the school campus observations
(see Step 1: Describing an Ecosystem), students are aware of
standing water on the school site, but they may be unsure if

16


it could be considered a problem. The teacher or mentor can
encourage further research (about topics including standing
water, stormwater runoff, non-pervious surfaces and flooding),
have the students observe the site after/during a rain or guide
students as they conduct an investigation by running water
through a sprinkler (simulated rain) for a designated period of
time in the area to see what happens. After any of these activities,
students can utilize the Step 2 Student Page: Defining a Problem
document and participate in guided discussions related to the
impact of water runoff on the campus, the surrounding area and
even student activities. Students may then come to the conclusion
that the problem is too much stormwater runoff is causing the
muddy areas and standing water by the basketball court.
Once the problem is determined, students define the problem by writing
a problem statement, which will be entered on the Step 3 Student Page
A: Research the Problem document. Once the problem is determined,
students write the problem statement on the Step 3 Student Page (A):
Research the Problem document.

17

Step 2 Student Page:

Define the Problem
Before you can define and describe a problem, you must first determine the problem. After
completing all observations and research for your Ecosystem Description, look through your written
observations, notes, data and questions as you use the process below to determine one problem
that exists on your site.
1. Mark any observations or notes that indicate an obvious problem(s) – one that you know exists
– with a star or other symbol you will remember.
2. Next, eliminate (cross a line through) or revise any notes or questions that are vague or unclear.
3. Group the remaining questions and observations either using color highlighters, symbols, or
other means of marking. (Or even by typing them on a blank document, cutting, pasting and
moving them around.)
4. Look within each group for any themes or concepts that show there is a problem – something
that could be solved (completed, fixed or changed).
5. If you are still unsure and cannot find a possible problem that could be investigated or solved,
work with your teacher and/or peers to further sort through your information. (You may need
to revisit your site and/or gather more information.)
6. Once you have determined a problem (the purpose of or reason for your project), define
that problem clearly in writing on your Step 3 Student Page (A): Researching the Problem
document.

18


Step 3 | Research the Problem

Step 3: Research the Problem

2. Developing Using Models
3. Planning Carrying Out Investigations
See Appendix A

The focus during Step 3 is the problem itself, not the potential solutions.
Students must gain background information as to the causes, effects and
the interconnectedness of their problem with the larger system before
they can begin to evaluate and/or design solutions. However, through
this process students will undoubtedly come across potential solutions as
they research factors that impact the problem. This information can be
recorded in the students’ notes to be used later during Step 5: Propose
Possible Solutions.
As students begin researching the problem, they work cooperatively with
their peers to not only determine what they already know, but also what
they need to know (see Step 3 Student Page (A): Research the Problem). The
students also designate the resources that they need, how they will gather
information and if further investigations are needed (see Step 3 Student
Page (B): Planning the Research). Students can use Step 3 Student Page (C):
Project Journal Notes Page while researching their problem.
The role of the teacher or mentor during this process is one of facilitator.
Students are encouraged to take charge of their own learning. However,
teachers and mentors can help equip students with the necessary tools
for success. Research and questioning skills can be taught during the
project-based learning process or through prior activities. Guidance can
be provided as students look for information, fine-tune their questions and
connect with experts.
For example, as students begin to research the problem of too much
stormwater runoff on their school campus, they first record the
information they already know about water and how it behaves.
They think about past experiences with water, drainage and flooding.
Students also begin to write questions or statements about what
they do not know. Throughout the process, the teacher or mentor
may guide the students to think about the types of information and
questions the students might research: What is drainage? How does it
work? What does non-pervious mean? Where does the water go when
it drains? Is there water underground? Additionally, the teacher may
provide lists of resources/websites and/or expert contact information
to enable students to more effectively plan their research, determine
the resources they will use and design how they might conduct further
investigations.

19


Why Focus on
Change Over Time?
Stepping back to consider how
a system can change over days/
months/years is an important
systems thinking skill. It can
help students think about
long-term and short-term
consequences of actions, and
to see patterns or cycles less
discernible when analyzing a
system through a single point in
time. By having students create
Change Over Time graphs, they
can demonstrate higher level
thinking skills by predicting
whether a particular part of
the analysis under study might
increase, decrease or oscillate
over time.

Change Over Time Prediction Graph
Once the students have a more thorough understanding of the
problem, they can participate in an optional activity (see Appendix
D) through which they look beyond today and consider the problem
over time – both short-term and long-term. Equipped with new
information, the students are able to create Change Over Time
Prediction Graphs to communicate how they think the problem will
change over a given period of time if they do not attempt to solve the
problem.
This activity enables students to consider the impacts of the problem
on the bigger system, both now and in the future.

To illustrate the difference,
consider a scenario where new
species of fish was introduced
into a lake, causing a native
species population to decrease.
A single-point-in-time question
might be, ‘what was the native
fish population before the
new species and/or after the
introduction of the new species?’
In contrast, a Change Over Time
question might ask: what might
the happen to the native fish
population over 1 year? 5 years?
10 years? Why?
With Change Over Time
graphs, different units of time
are considered to help think
about the ever-changing nature
of systems, and students focus
on thinking about the patterns
rather than graphing precise
data points. This type of analysis
often offers rich insights that
might otherwise be overlooked.
-Nalani Linder, MA

20



Step 3 Student Page (A):

Research the Problem
*This is a research planning document. Your notes and information should be recorded in your
Project Journal Notes pages.
Once you have determined your problem, write a statement that describes the problem in your own
words. Then, begin the research process by determining what you already know, what you need to
know and where you might find the information to help you get an in-depth understanding of the
problem.
The Problem:

Why is this problem important?

I already know:

I need to know:

21

Step 3 Student Page (B):

Planning the Research
I will find information from:
(Explain in detail: further investigations and/or data collection needed, resources such websites or books to be used,
individuals/groups to contact, etc.)

22

Step 3 Student Page (C):

Project Journal Notes Page
My Notes:

Resource Citation:

Topics Covered

23


Step 4 | Stakeholder Description

Step 4: Stakeholder Description

2. Developing Using Models
3. Planning Carrying Out Investigations
4. Using Mathematics Computational Thinking
See Appendix A

Stakeholders are individuals or groups with interests related to an issue or
outcome. Every public policy decision, from funding priorities to laws, has
an impact on multiple stakeholders, and thus, is frequently influenced by
those stakeholders.
As students research the individuals and groups that are connected to
their project, they see firsthand that most issues or problems have more
than just one or two stakeholders, each of whom may have a different view
point in relation to a problem and its potential solutions.
Through the Stakeholder Description, students research at least 2
stakeholders to gain a deeper understanding of the different perspectives
surrounding the problem. The more stakeholders they research, the
better their understanding of any issues related to the problem. Students
should contact Tribes, local, state and federal governments, business and
industries, community groups and landowners.
As students gather information about stakeholders, they can look at
stakeholder websites*, newsletters or they can even interview individuals
and/or group representatives. Information gathered can be compiled and
shared/presented to fellow students in a written format, or if desired, as
commercials or advertisements. The key is for students to finish Step 4
with an enhanced understanding of the stakeholders’ perspectives related
to the project problem.
After completing the Stakeholder Description, students will then be able
to take into account the different stakeholder concerns and interests, as
well as any points of contention among stakeholders, as they research
and determine the best possible solution(s) for a problem. While students
do not necessarily need to cater to every stakeholder group, more often
than not, they do need to seek approval, funding and/or land access from
a stakeholder or multiple stakeholders to carry out a solution. Awareness
of stakeholder perspectives will enhance the students’ abilities to design
their solution/project plans, requests and/or presentations so that they
accomplish their goals while also addressing stakeholder interests and/or
concerns.
Students should make sure they are looking at the stakeholder’s website,
not a third party website with information about the stakeholder.

24



For example, if students determined that poor drainage next to the basketball courts was the problem, their
stakeholders would be those individuals and groups connected to the school campus. Such stakeholders
would include the district office, principal, school staff, custodian and even students who use the basketball
court and/or field next to the court.
As students begin researching the stakeholders, they gain an increased understanding about various interests
and concerns:
• The school district is concerned that drastically changing the school grounds (such as putting in drains
or a rain garden) would be expensive and difficult to maintain long-term. As a result, the district would
rather just leave the soggy area (and puddle when it rains) next to the basketball court alone.
• The principal and staff are frustrated with the poor drainage problem. An increased amount of time must
be spent roping off the area, re-directing students and retrieving basketballs. However, they do not want
to see funds for school programs and field trips redirected to pay to fix the problem.
• The custodian is also concerned about the poor drainage. Before school and during recesses, some
students get very muddy and track it into the school, making more clean-up necessary. He likes the idea
of fixing the problem, but is concerned that long-term maintenance will become his responsibility, thus
resulting in more work.
• The students who enjoy playing on the basketball court also express frustration about continually having
to stop playing their game to fish the ball out of the mushy area/puddle. They want the area fixed as long
as they can still play basketball.
As students continue their project by looking for potential solutions, their knowledge of stakeholder
perspectives will assist with determining the benefits, limitations and feasibility of each possible solution.
Note: Teachers and mentors may need to remind students to record all the sources they use for research on their
Annotated Bibliographies.

25


Stakeholder Description Notes, Page 1
• Stakeholder Group/Name (Person, Agency/Organization/Business):
• Web address:
• Phone Number:
• Representative Name (if business/agency/organization contacted):
• How is this stakeholder connected to the problem? Has the stakeholder been affected or
impacted by the problem? (For example: owns the land where the problem is occurring, works
where the problem exists, etc.)

• Is the stakeholder aware of the problem? If so, does the stakeholder have any opinions (concerns
or positive comments) related to the problem?

• How might the problem affect or impact the stakeholder now and in the future? Give details.

• How might the stakeholder affect or impact the problem and/or possible solutions now and in
the future? Give details.

• Would the stakeholder like to play a role this project, such as sharing their knowledge of the
problem or helping with finding a solution to the problem? If so, what role? (speaking to the
class, helping provide resources, participating in field work or data collection, etc.)

26




Stakeholder Description Notes, Page 2
• Stakeholder Group/Name (Person, Agency/Organization/Business):
• If the stakeholder owns land where the project is taking place:
 How does the stakeholder currently use the land? (If the land is leased to another group for
use, please list the group and how that group uses the land.)

 Does the use of the land impact the problem? How?

 Are any efforts taken to ensure environmentally-friendly practices on the land? If so, what
are they?

 Are there any laws that affect the way the stakeholder can use/impact the land?

 If the stakeholder is an individual or family group, are there any cultural or family
connections that tie him/her/them to the land? Please describe. (Retell a story, explain the
connection, etc.)

27

Step 5 | Propose Possible Solutions

Step 5: Propose Possible Solutions

6. Constructing Explanations Designing Solutions
7. Engaging in Argument from Evidence
See Appendix A

Frequently, problems that students discover on their school campus
or a local site will not be completely new. Someone may have already
addressed and solved or attempted to solve the same, or at least a similar,
problem. In fact, as students research possible solutions to a problem,
they will most likely find a number of different alternatives, each with its
own set of benefits and consequences.
This information can be of great value to students during Step 5: Propose
Possible Solutions. Students complete the Step 5 Student Page: Comparison
Table of Possible Solutions by researching and recording what others have
proposed or done in similar situations and/or write up original ideas while
evaluating each solution based on the following criteria:
• Summary of the possible solution
(Describe the solution in terms of who, what, how, when and where.)
• Positive impacts on the environment
(What will the solution do for a local ecosystem and/or the Puget
Sound/Pacific ocean?)
• Potential negative consequences (Trade-offs)
(What might result from the solution that would be damaging, harmful
or not desired?)
• Stakeholder perspectives
(How might stakeholders view the solution? What might they like or
dislike?)
• Limitations
(What might hold back or make the solution difficult? Consider cost,
time, liability, etc.)
• Feasibility (Reasonableness)
(Rate the solution on a scale from 1 to 5, with 1 being not possible to
complete and 5 being a realistic and doable project.)
Upon completion of the Comparison Table of Possible Solutions
document, students then narrow down their list of possible solutions
by rating and comparing the evaluation criteria. Through this
evaluation process, each student develops an increased awareness of
the interconnectedness of actions, as well as the complexity of decision
making in relation to the environment. He or she also determines the best
possible solution to the problem, and as a result, the project.
Note: You can use Sustainable Tomorrow (PEI, 2011) to develop models
for analysis.
28




Determine Possible Solutions
Now that you know have a clear understanding of the problem you are trying to solve (including
stakeholder opinions), you are ready to brainstorm possible solutions to the problem and to
determine your project.
During your research to learn more about the problem, you probably discovered that someone may
have already solved, or attempted to solve, a similar problem. You may also have some of your own
ideas as to a possible solution to the problem. Each possible solution will have its own set of positive
benefits and negative consequences.
To determine the best possible solution to the problem you wish to solve, follow this process using
the Step 5 Student Page: Comparison Table of Possible Solutions. Keep in mind that no solution
is perfect!
1. Create a Possible Solutions list.
Write down all possible solutions on the student page that you learned about during your
research as well as any original ideas. You may need to do more research about the problem and
its possible solutions. Be sure to document all of the sources you use on your Bibliography.
2. Narrow your list.
Read through your list and cross off any ideas on your Possible Solutions that do not interest you
or that seem unrealistic* (for example, solutions that would be way too expensive, require way
too much expertise, or would take longer than the time you have available).
*Keep in mind that many projects will require some money for purchasing equipment
and/or experts to provide help. This does not mean a project is not doable. Many groups
and businesses are willing to donate materials and/or their time to help students complete
meaningful projects!
3. Determine top 3 or 4 solutions.
Continue to narrow your list until you have 3 or 4 possible solutions. Summarize those solutions
in the first column (one on each row) of the Step 5 Student Page: Comparison Table of
Possible Solutions.
4. Compare solutions.
Briefly describe the details of each solution for the following categories:
Summary of the possible solution
(Describe the solution in terms of who, what, how, when and where.)
Positive impacts on the environment
(What will the solution do for a local ecosystem and/or the Puget Sound?)
Potential negative consequences (Trade-offs)
(What might result from the solution that would be damaging, harmful or not desired?)

29


Determine Possible Solutions
Stakeholder perspectives
(How might stakeholders view the solution? What might they like or dislike?)
Limitations
(What might hold back or make the solution difficult? Consider cost, time, liability, etc.)
5. Rate the solutions.
Once you have described each solution, give each a Feasibility Rating that determines if it is
reasonable and realistic for you to complete. The ratings should be on a scale from 1 to 5,
with 1 being not possible to complete and 5 being a realistic and doable project. (Remember,
perfect solutions do not exist!)
6. Choose the best solution for your project.
Look over the comparison table. Choose the solution with the highest rating and/or a highly
rated solution that seems most interesting. Once you have approval from your teacher, that
solution will be your project.

30

31

-After the rainy
season

-We would work
with the school
district

Install French
Drains below the
basketball court

-During Science
classes, in the
spring

-We students will
plan, gather plants
and create it

The water would
be captured
underground and
would eventually go
into the earth or
water table.

-It cleans out
pollution from
the water as it
soaks in. So, it
protects the Puget
Sound.

-It captures
water and allows
it to return to the
water cycle slowly.

-Students might
not get to play
where there are
drains.

-The drains could
clog and cause
more flooding.

-The plants might
die and we’d have
to buy more.

-Could be
vandalized

-Could flood onto
playground if not
built correctly.

What might result from
the solution that would be
damaging, harmful or not
desired both now
and in the future?

What will the solution do
for a local ecosystem and/
or the Puget Sound/Pacific
Ocean both now and in
the future?

Describe the solution
in terms of who, what,
how, when and where.

Put in a rain
garden by the
basketball court:

Potential Negative
Consequences
(Trade-offs)

Positive Impacts on
the Environment

Summary of Possible
Solutions

-District and
school people
worried the rest
of the playground
will get damaged
while installing the
drains.

-Teachers and
students like the
idea of doing
something for the
environment.

-District people
are not sure who
will take care of it
when we move on
to other schools.

How might stakeholders
view the solution?
What might they like or
dislike?

Stakeholder
Perspectives

-We would need
to get permits
and pay someone
to put in the
drains.

-French Drains
are very
expensive.

-We need
equipment like an
excavator – need
to find someone
to help.

-Expensive – we
would need to
get some plants
and soil donated

What might hold back
or make
the solution difficult?
Consider cost, time,
liability, etc.

Limitations

1

4

Rate on a
scale
from 1 to 5

Feasibility
Rating


Example: Step 5 Student Page: Comparison Table of Possible Solutions

How might stakeholders
view the solution?
What might they like or dislike?

What might result from
the solution that would be
damaging, harmful or not
desired both now
and in the future?

What will the solution do for
a local ecosystem and/or the
Puget Sound/Pacific Ocean both
now and in the future?

Describe the solution
in terms of who, what, how,
when and where.

3.

2.

1.

Stakeholder
Perspectives

Potential Negative
Consequences
(Trade-offs)

Positive Impacts on the
Environment

Summary of Possible
Solutions
What might hold back or
make the solution difficult?
Consider cost, time,
liability, etc.

Limitations

Rate on a scale
from 1 to 5

Feasibility
Rating


Step 5 Student Pages:

Comparison Table of Possible Solutions

32



Step 5 Student Pages:

Comparison Table of Possible Solutions, Version 2
Define the Problem:
Why is this Problem Important?
Summary of Possible Solutions

Positive Impacts on the
Environment

Potential Negative Consequences
(Trade-offs)

Describe the solution in terms of who,
what, how, when and where.

What will the solution do for a local ecosystem
and/or the Puget Sound/Pacific Ocean
both now and in the future?

What might result from the solution that would be
damaging, harmful or not desired
both now and in the future?

1.

2.

3.

33


Stakeholder
Perspectives

Limitations

Feasibility
Rating

How might stakeholders view the solution?
What might they like or dislike?

What might hold back or make the solution difficult?
Consider cost, time, liability, etc.

Rate on a scale
from 1 to 5

34


Step 6 | Develop a Plan

Step 6: Develop a Plan: Identify, Plan and Reflect on Your Project
5. Using Mathematics Computational Thinking
See Appendix A

During Step 6, students work collaboratively to develop a Project Plan
to address the problem - identifying required resources and steps needed
for implementation, as well as reflecting on the potential outcomes of the
solution.
While some of this information is communicated during Step 5: Propose
Possible Solutions, students will need to conduct additional research to
further describe the project in terms of connections to the bigger picture,
costs, procedures, limitations, and evaluation criteria. Additionally, as
students gather information, they should record the names and contact
information of local experts (including stakeholders) that may be available
to provide valuable input during the plan writing process, as well as
resources or expertise during the project implementation.
The Step 6 Student Page (A): Project Plan is the document students will
use to guide their project. It must be well thought-out and thorough.
Teacher or mentor oversight and monitoring of the plan development are
crucial. Small group or class meetings to discuss components of the plan
are beneficial for students in that they receive specific guidance, as well
as to teachers in that they can gauge student understanding and progress.
Additionally, if small groups within a class are working on the same
project, class meetings allow for student communication and collaboration
to create a master Project Plan for the class.
A separate, but equally important, component of the Project Plan is
the Step 6 Student Page (B): Pre-Project Reflection. Through this simple
reflection, teachers are able to assess student understanding and comfort
levels, and provide additional guidance and/or project adjustments as
needed.
While the Pre-Project Reflection is a useful tool for student communication
with the teacher or mentor, the Project Plan is a valuable tool for student
communication with stakeholders, particularly stakeholders that must
approve a project. The components of the Plan can be presented easily
as slides within a PowerPoint or other presentation program*. After the
students present to the teacher, mentor and/or stakeholders, they should
make adjustments and/or corrections, as needed. Once the Project Plan is
complete and approved, the students are ready to implement the project.
*If students present to stakeholders, they should be provided ample
opportunities for practice and review by the teacher or mentor before
their presentation.

35


Project Plan
Now that you have determined the best possible solution to the problem, you have determined your
project. While filling out the Step 5 Student Page: Comparison Table of Possible Solutions, you
gave a brief description of your project. Use the details from that table, plus additional information
gathered through further research, to identify and plan your project.
Notes
Purpose: What is the problem?

Location: Where is the problem? Be as specific as possible.

Summary: In one to three sentences, summarize your project (the solution to the problem).

Connections: Describe how this project connects to the bigger picture: the Puget Sound. How will
it impact the region (both positively and negatively)?

Costs/Budget: If needed, create a table of predicted costs/expenses.

36




Identify and Plan Your Project
Project Plan Notes - continued
Procedure: Create a timeline (with or without actual dates) of the key steps you will take to complete
your project. (Keep in mind any further research and/or investigations you will need to complete. In
addition, plan for time to evaluate, and possibly adjust, your project plan during the process.)

Limitations and Challenges: What might interfere with or cause problems during your project?
How will you prepare for these limitations/challenges?

Evaluation: How will you measure the success of your project? In other words, how will you prove
it turned out like you planned? Develop a list of criteria (or standards) that you will use at the end of
your project to prove it was successful. The criteria can include measurements and/or statements.
For example, if your project was to install a rain garden, the criteria could include simple criteria – During an
actual or simulated rain, the rain garden will prevent puddles from forming by the basketball court. Or more specific
criteria - During an actual or a simulated rain, the rain garden will capture and hold all of the water coming off the
basketball court. OR The rain garden will capture and hold the stormwater runoff from 4,200 square feet of asphalt
(the basketball court) and will completely drain within 24 hours.

Contacts: List all contacts (name, title/job, business/organization, email, and phone) for this project.
Be sure to include project teammates, experts and stakeholders.

37

Step 6 Student Page (B):

Pre-Project Reflection
After you complete Step 6 Student Page (A): Identify and Plan your Project, spend some time
thinking about your plan and the following questions:
1. hat role will you play with this project?
W
2. hat excites you?
W
3. hat worries you?
W
Share your responses through one of the following options:
• Writing: Write a one paragraph summary (5-6 sentences) that answers the questions above.

• Art: Create an original work of art in any medium of choice (such as painting, drawing or
sculpture). Be sure to communicate your responses to the questions above.

• Creative writing: Create a skit, commercial, or persuasive letter to yourself that communicates
your responses to the questions above.
Notes/Draft:

38


Step 7 | Implement the Plan

Step 7: Implement the Plan:
Tracking Progress through Field Notes
5. Using mathematics Computational Thinking
See Appendix A

Throughout the implementation of a project, students must continually
monitor and communicate their progress not only to their peers, but
also to teachers, mentors and/or stakeholders. The Step 7 Student Page:
Field Notes document is used by students as they report on their projects
daily, weekly or after each major task. It provides a structured format for
communicating about recent activities, recording any changes made to the
Step 6 Student Page (A): Project Plan and reflecting upon the impact and
value of each step of the process.
Prior to any project, the Field Notes page should be altered by teachers,
mentors and/or students to accurately depict the components of
the project. For example, students may need to record specific data/
measurements or create diagrams/drawings to thoroughly communicate
the project’s progress. In addition, the Field Notes document should
always include questions that allow students to reflect upon the value of a
project and how it impacts the “bigger picture”.
Upon completion of the project, the Field Notes documents are compiled
into a chronological record of activities, challenges and impacts of the
project and are utilized as the students summarize, evaluate and present a
project.

39

Step 7 | Implement the Plan

Field Notes
As you implement or carry out your plan, fill out a Field Notes page daily, weekly or each time you
complete a major task related to your project.
Field Notes
Date:
Who: List the individual(s) you worked with.

Location: Be as specific and include latitude and longitude, if needed.

Activity: Describe what you did.

Role of Activity: Write a brief description of how your participation in today’s activity will impact
your project and/or the Puget Sound.

Process: Is your project going the way you planned? Do you need to change your Project Plan in
any way? If so, how (modify schedule – more or less time, changes in equipment/materials list,
different process steps needed)? Be sure to record changes on your actual Project Plan.

Next Steps: What are the next steps in your process?

40


Step 8 | Summarize, Evaluate and Reflect

Step 8:
Summarize, Evaluate and Reflect
8. Obtaining, Evaluating, and Communicating Information
See Appendix A

The culmination of the Pacific Education Institute’s Project-Based Learning
Model is the presentation of a Step 8 Student Page: Project Summary,
Evaluation and Reflection. Students communicate their experiences
while summarizing and assessing a project’s process and outcomes. They
consider the criteria for success described in the Project Plan as they
determine the project’s effectiveness. In addition, students reflect upon the
environmental impacts of the project, intended and unintended, as well as
the influence the project had upon themselves.
The Project Summary, Evaluation and Reflection is designed so students
can easily and effectively develop a presentation with each section serving
as a separate visual (such as a PowerPoint slide) and/or major talking
point. As in the case of the Step 6 Student Page: Project Plan, teachers and/
or mentors should provide students with ample opportunities for practice
and review before public presentations.
Once prepared, students present to their peers, stakeholders and/or
community members, communicating the reasons, structure and positive
environmental impacts of their project. The students further internalize
the value of their project and the audience learns about efforts to restore
or protect natural components of their community.

41


Project Summary, Evaluation and Reflection
Use the statements and questions below to prepare a presentation about your project. (Refer to the
documents and Field Notes that you created during your project, as needed.)
1. Team Members
List the individuals you worked with to complete this project.

2. Briefly describe the Problem you worked to solve.

3. Explain the importance of this problem and how it connects to/affects the larger region (such as
the Puget Sound or Columbia River Basin).

4. Identify the stakeholders you worked with, as well as other stakeholders who had an interest in
your project.

5. Summarize your project, including any unexpected challenges, changes made to your original
plan and major activities.

42




Project Summary, Evaluation and Reflection, p. 2
6. Describe the success of the project. Look back at the Evaluation section of your Project Plan and
discuss how the end result of your project met or didn’t meet those criteria.

7. Describe any unintended consequences that resulted from your project. (Did anything happen as
a result of your project that you didn’t expect or plan?)

8. Did your opinions and/or perspectives change related to your project? How? Why or why not?

9. Acknowledge any other individuals you worked with or who assisted you during this project/
experience.

10. If you are presenting this summary, be prepared for questions from your audience.

43

Bibliography

Bibliography
Association for Supervision and Curriculum Development. (2010).
Curriculum 21: Essential Education for a Changing World. Edited by Heidi
Hayes Jacobs. ASCD, Alexandria, VA.
Buck Institute for Education – http://www.bie.org
Michaels, S., Shouse, A.W., and Schweingruber, H.A. (2008). Ready, Set,
Science! Putting Research to Work in K-8 Science Classrooms. Board on
Science Education, Center for Education, Division of Behavioral and Social
Sciences and Education. Washington, D.C: The National Academies Press.
Moursund, D. (1999). Project-Based Learning Using Information Technology.
International society for Technology in Education, Eugene, OR.
National Academy of Engineering National Research Council. (2009).
Engineering in K-12 Education. National Academies Press, Washington,
D.C..
National Research Council. (2011). A Framework for K-12 Science Education:
Practices, Crosscutting Concepts, and Core Ideas. National Academies Press,
Washington DC
Office of the Superintendent of Public Instruction. (2009). Washington State
K-12 Science Learning Standards: www.k12.wa.us/publications
Office of the Superintendent of Public Instruction. (2009). Powerful
Classroom Assessments. http://www.k12.wa.us/Science/PCAs/PCAs/
PrintingPCADocuments.pdf
Ponto, C., and Linder, N. (2011). Sustainable Tomorrow: A Teacher’s
Guidebook for Applying Systems Thinking to Environmental Education
Curricula. Pacific Education Institute and Association of Fish and Wildlife
Agencies.
Ryken, A., Otto, P., Pritchard, K., and Owens, K. (2007). Field Investigation:
Using Outdoor Environments to Foster Student Learning of Scientific
Processes. Pacific Education Institute and Association of Fish and Wildlife
Agencies.
Taylor, C., Ferguson, L., Tudor, M., and Angell, T. (2001). Environmental
Education Frameworks that Integrate Washington State’s Standards.
Revised 2004 by O. Bartosh. Pacific Education Institute Technical Report
Number 1.
Torp, L and Sage, S. (1998). Problems as possibilities: problem-based
learning for K-12 education. Association for Supervision and Curriculum
Development, Alexandria, VA
Wheeler, G., Bergsman, K., Thumlet, C. and Kelly, B. (2010) Sustainable Design
Project Teacher Manual. Olympia, WA: Office of the Superintendent of
Public Instruction.
Windschitl, M., Ryken, A., Tudor, M., Koehler, G., and Dvornich, K. (2007). A
Comparative Model of field Investigations: Aligning Standards for School
Science Inquiry with the Practices of Contemporary Science. Volume 107,
Number 1, January. School Science and Mathematics.

44


Glossary

Glossary

Analysis: A systematic, detailed examination intended to a (1) define
or clarify problems, (2) inform design decisions, (3) predict or
assess performance, (4) determine economic feasibility, (5) evaluate
alternatives, or (6) investigate failures. (NSE NRC 2009).
Changes Over Time Graph: A change-over-time graph shows the
pattern of how one or more parts in a system is changing over time.
Components: Distinct parts of an object or system.
Design Process: The process of originating and developing a plan for
product, structure, system, or component to meet a human need or
want.
Ecosystem: A natural unit consisting of all pants, animals, and
microorganism (biotic factors) in an area functioning together with all
of the nonliving physical (abiotic) factors of the environment.
Engineering Design: A purposeful, iterative process with the explicit goal
governed by specifications and constraints.
Evaluation: To make judgments or appraisals based on collected data.
Feasibility (for project solution): Reasonable and realistic to complete.
Geographic Information System: A geographic information system
(GIS) integrates hardware, software, and data for capturing, managing,
analyzing, and displaying all forms of geographically referenced
information (ESRI).
Interactions: The mutual influences among variables in a system or
between subsystems, which may be correlational or causal.
Modeling: A graphical, physical, or mathematical representation of the
essential features of a system or process that facilitates engineering
design. (NAE NRC 2009).
Problem: A challenge that can be solved through the design process.
Solution: A device or process created through technological design to
meet a human need or want.
Stakeholders: Individual or groups with interests related to an issue or
outcome.

45

Glossary

Systems Thinking: Seeing the world as a whole and interconnected.
Systems thinking looks at how parts of a system are connected
together and how changes in one part of a system can affect changes in
other parts over time.
Technology: Any modification of the natural world made to fulfill human
needs or desires (NAS, 2011).
Trade Offs: Decisions made to relinquish or reduce one attribute of a
design on order to maximize another attribute (NAE NRC 2009).
Unintended Consequences: Unplanned or unexpected events or
situations occurring as a result of an action taken.

46


Appendix A : Distinguishing Practices in Science from those in
Engineering: Framework for K-12 Science Education (NRC, 2011)
1. Asking Questions and Defining Problems

Science begins with a question about a phenomenon,
such as “Why is the sky blue?” or “What causes
cancer?” and seeks to develop theories that can provide
explanatory answers to such questions. A basic practice
of the scientist is formulating empirically answerable
questions about phenomena, establishing what is already
known, and determining what questions have yet to be
satisfactorily answered.

Engineering begins with a problem, need or desire
that suggests an engineering problem that needs to be
solved. A societal problem such as reducing the nation’s
dependence on fossil fuels may engender a variety of
engineering problems ,such as designing more efficient
transportation systems, or alternative power generation
devices such as improved solar cells. Engineers ask
questions to define the engineering problem, determine
criteria for a successful solution, and identify constraints.

2. Developing and Using Models

Science often involves the construction and use of a
wide variety of models and simulations to help develop
explanations about natural phenomena. Models make it
possible to go beyond observables and imagine a world
not yet seen. Models enable predictions of the form
“if . . . then . . . therefore” to be made in order to test
hypothetical explanations.

Engineering makes use of models and simulations to
analyze existing systems so as to see where flaws might
occur or to test possible solutions to a new problem.
Engineers also call on models of various sorts to test
proposed systems and to recognize the strengths and
limitations of their designs.

3. Planning and Carrying Out Investigations

Scientific investigation may be conducted in the field or
the laboratory. A major practice of scientists is planning
and carrying out a systematic investigation, which
requires the identification of what is to be recorded and,
if applicable, what are to be treated as the dependent
and independent variables (control of variables).
Observations and data collected from such work are used
to test existing theories and explanations or to revise and
develop new ones.

4. Analyzing and Interpreting Data

Engineers use investigation both to gain data essential
for specifying design criteria or parameters and to test
their designs. Like scientists, engineers must identify
relevant variables, decide how they will be measured, and
collect data for analysis. Their investigations help them to
identify how effective, efficient, and durable their designs
may be under a range of conditions.

Scientific investigations produce data that must be
analyzed in order to derive meaning. Because data
usually do not speak for themselves, scientists use a range
of tools—including tabulation, graphical interpretation,
visualization, and statistical analysis—to identify the
significant features and patterns in the data. Sources of
error are identified and the degree of certainty calculated.
Modern technology makes the collection of large data
sets much easier, thus providing many secondary sources
for analysis.

Engineers analyze data collected in the tests of their
designs and investigations; this allows them to compare
different solutions and determine how well each one
meets specific design criteria—that is, which design best
solves the problem within the given constraints. Like
scientists, engineers require a range of tools to identify
the major patterns and interpret the results.

5. Using Mathematics and Computational Thinking

47

Appendix A | Distinguishing Practices in Science from those in Engineering

In science, mathematics and computation are
fundamental tools for representing physical variables
and their relationships. They are used for a range of
tasks, such as constructing simulations, statistically
analyzing data, and recognizing, expressing, and
applying quantitative relationships. Mathematical and
computational approaches enable predictions of the
behavior of physical systems, along with the testing of
such predictions. Moreover, statistical techniques are
invaluable for assessing the significance of patterns or
correlational.

In engineering, mathematical and computational
representations of established relationships and
principles are an integral part of design. For example,
structural engineers create mathematically-based
analyses of designs to calculate whether they can
stand up to the expected stresses of use and if they can
be completed within acceptable budgets. Moreover,
simulations of designs provide an effective test bed for
the development of designs and their improvement.

6. Constructing Explanations and Designing Solutions

The goal of science is the construction of theories that
can provide explanatory accounts of features of the
world. A theory becomes accepted when it has been
shown to be superior to other explanations, in the
breadth of phenomena it accounts for, and its explanatory
coherence and parsimony. Scientific explanations are
explicit applications of theory to a specific situation or
phenomenon, perhaps with the intermediary of a theorybased model for the system under study. The goal for
students is to construct logically coherent explanations of
phenomena that incorporate their current understanding
of science, or a model that represents it, and are
consistent with the available evidence.

Engineering design, a systematic process for solving
engineering problems, is based on scientific knowledge
and models of the material world. Each proposed solution
results from a process of balancing competing criteria of
desired functions, technological feasibility, cost, safety,
esthetics, and compliance with legal requirements. There
is usually no single best solution but rather a range of
solutions. Which one is the optimal choice depends on
the criteria used for making evaluations.


In science, reasoning and argument, are essential for
identifying the strengths and weaknesses of a line of
reasoning and for finding the best explanation for a
natural phenomenon. Scientists must defend their
explanations, formulate evidence based on a solid
foundation of data, examine their own understanding in
light of the evidence and comments offered by others,
and collaborate with peers in searching for the best
explanation In engineering, reasoning and argument
are essential for finding the best possible solution to a
problem.

Engineers collaborate with their peers throughout the
design process, with a critical stage being the selection of
the most promising solution among a field of competing
ideas. Engineers use systematic methods to compare
alternatives, formulate evidence based on test data, make
arguments from evidence to defend their conclusions,
evaluate critically the ideas of others, and revise their
designs in order to achieve the best solution to the
problem at hand.

8. Obtaining, Evaluating, and Communicating Information

Science cannot advance if scientists are unable to
communicate their findings clearly and persuasively or
to learn about the findings of others. A major practice
of science is thus the communication of ideas and the
results of inquiry—orally, in writing, with the use of
tables, diagrams, graphs, and equations, and by engaging
in extended discussions with scientific peers. Science
requires the ability to derive meaning from scientific texts
(such as papers, the Internet, symposia, and lectures),
to evaluate the scientific validity of the information thus
acquired, and to integrate that information.

Engineers cannot produce new or improved
technologies if the advantages of their designs are not
communicated clearly and persuasively. Engineers need
to be able to express their ideas, orally and in writing,
with the use of tables, graphs, drawings, or models and by
engaging in extended discussions with peers. Moreover,
as with scientists, they need to be able to derive meaning
from colleagues’ texts, evaluate the information, and
apply it usefully. In engineering and science alike, new
technologies are now routinely available that extend the
possibilities for collaboration and communication.

48


Appendix B: Preparing Students to Conduct Field Investigations
Excerpt from Field Investigations: Using Outdoor Environments to Foster Student Learning of Scientific Processes (PEI 2007)

Part 1: What Questions Can I Investigate?
Objectives

Learning Experience

Students will:

Students sort investigative questions into three
categories (descriptive questions, comparative
questions, and correlative questions).

1) distinguish between three different types of
investigative questions, and
2) suggest questions that can be asked about the
natural world.

Materials
• Sets of Investigative Questions (one set per

three students). Copy questions onto card
stock and cut into sentence strips; lace in an
envelope.

Science Grade Level Expectation
Questioning: Understand how to ask a
question about objects, organisms, and events
in the environment.

• Handout. Three types of field investigation

questions.

• Question on Board: Given the categories

Thinking Skills

descriptive, comparative, and correlative, how
would you categorize the set of questions in
your envelope?

Comparing/Contrasting, Classifying

Background
What defines my environment? What is a healthy environment? What is humans’ relationship to the
environment? How can our community sustain our environment? What is my role in the preservation and use of
environmental resources? These essential questions about the relationships between humans and the environment
cannot be answered with one field investigation.
Asking a testable question is central to scientific inquiry. The following lesson is geared to help students think
about the ways questions are asked and the types of questions field investigators research. There are three types of
field investigations—descriptive, comparative, and correlative.
Descriptive field investigations involve describing parts of a natural system. Scientists might try to answer
descriptive questions such as, “Where do cougars go when their habitat gives way to a new housing
development?” or “What areas do cougars select for den locations?”
In comparative field investigations, data is collected on different populations, or under different conditions (e.g.,
times of year, locations), to make a comparison. A researcher might ask a comparative question such as, “Is there a
difference in lichen growth in areas of high pollution and areas of low pollution?”
Correlative field investigations involve measuring or observing two variables and searching for a pattern. These
types of investigations are typically not explored until high school. Correlative questions focus on two variables to
be measured together and tested for a relationship: “Do animal tracks increase with greater forest canopy cover?”
“Does the salmon population go down when dissolved oxygen concentrations go down?”
There are many types of questions. In addition to the three types of investigative questions, students may ask
essential questions, why questions and book/internet research questions.

49

Appendix B | Preparing Student to Conduct Field Investigations

Lesson
Focus
1. Review the essential questions. These big picture questions are why we conduct field investigations. What
defines my environment? What is a healthy environment? What is humans’ relationship to the environment?
How can our community sustain our environment? What is my role in the preservation and use of
environmental resources?
2. Distribute the handout and discuss the three types of field investigation questions. You might ask students
questions to help them notice differences in the three types of questions.
· What patterns do you notice in each type of question?
· What words are important to look for when identifying each type of question?

Explore
3. Divide the class into teams of three. Hand each team an envelope set of investigative questions, and ask them
to sort the questions into three categories—descriptive, comparative, and correlative.

Reflect
4. Give the teams time to think about each question and agree on the categories. You can facilitate this process
by asking the questions below as you circulate the room.
· Did you all agree to this category? Explain how you came to this decision.
· Can each one of you come up with a justification as to why these questions fall into the categories they do?
· Do you have an uncertainty pile…if so, why? What more do you need to know?
· What questions do you have about your categories?
· Can you write your own examples of each type of question?
5. After about 10 minutes, have the class share their categories by asking about a sample of the questions you
handed out. With a chart at the front of the class, have students from various groups place a question in the
category they selected and have them say why they chose that category.
6. Discuss why scientists need to think about the questions they pose before working in the field.

Assessment
As students categorize the questions ask them to justify how they classified each question, and ask them to
identify the patterns they notice in each type of question (e.g., descriptive questions often begin with “how
many,” “when,” or “where”).
Some questions may fit more than one category; what is important is that students can justify their thinking
for each category. For example, students may identify the question, “What is the air temperature at your
school throughout the year?” as descriptive, because they would be documenting the temperature of a specific
location. Other students may call it a comparative question, because they could use the collected temperature
data to compare two different times of year.

50


Three Types of Field Investigation Questions
Descriptive Questions
Descriptive field investigations involve describing parts of a natural system. Descriptive questions focus
on measurable or observable variables that can be represented spatially in maps or as written descriptions,
estimations, averages, medians, or ranges.
· How many _____ are there in a given area?
· How frequently does _____ happen in a given period?
· What is the [temperature, speed, height, mass, density, force, distance, pH, dissolved oxygen,
light density, depth, etc.] of ______?
· When does _____ happen during the year? (flowering, fruit, babies born)
· Where does_____ travel over time? (What is an animal’s range?)

Comparative Questions
In comparative field investigations data is collected on different groups to make a comparison. Comparative
questions focus on one measured variable in at least two different (manipulated variable) locations, times,
organisms, or populations.
· Is there a difference in ______ between group (or condition) A and group B?
· Is there a difference in ______ between (or among) different locations?
· Is there a difference in ______ at different times?

Correlative Questions
Correlative field investigations involve measuring or observing two variables and searching for a pattern.
Correlative questions focus on two variables to be measured and tested for a relationship.
· What is the relationship between variable #1 and variable #2?
· Does _____ go up when _____ goes down?
· How does _____ change as _____ changes?

51


Investigative Questions for Sorting
Copy these questions on to card stock and cut into sentence strips

Does more salal (type of plant) grow in riparian, forest, or field habitats?
Are more insects found in the schoolyard in September, October, or
November?
Is wind speed greater near the building or out on the playground in March?
Where do you find the most pill bugs (isopods): under a log, under a pot, or
under bushes?
Which habitat (in the forest, in a field, or by a stream) has the greatest
percentage of sand in the soil?
Are soil temperatures the coolest at a depth of 5cm, 10cm, or 15cm?
In April, which twigs grow faster, those on maple trees or those on sweet gum
trees?
Are traffic sounds louder in front of the school or behind the school?
How many Pileated Woodpeckers live in Schmitz Park?
How many deer live in Olympic National Park?
How many eggs does a salmon lay in the fall in Longfellow Creek?
How often do Swallowtail Butterflies lay eggs in a season in Eastern
Washington?

52


What is the depth of McLane Creek at Delphi Road in September?
What is the air temperature at your school throughout the school year?
What kinds of plants grow in ___ Forest?
What types of birds use the school habitat during the school year?
When do robins in western Washington nest?
When do hemlock trees pollinate?
What is the range of black bears living in Snoqualmie Pass?
What is the number and range of cougars in the Cle Elum, Roslyn area?
Is there a difference in the size of the range of a screech owl or barred owl in
Washington’s lowland forests?
Are mature (greater than 30 cm diameter) conifer trees taller than mature
deciduous trees in the Olympic Rain Forest?
Which location (under bushes, open grass, or on black top) has the highest
temperature at 7:00 a.m. at Cedar River Middle School?
Are there more black bears per acre on Snoqualmie Pass or Olympic National
Forest?
Are there more snowberry bushes near streams or away from streams in the
Grasslands/Steppe in eastern Washington?
Are deer more active during the dawn or the dusk in____?
53


Do more ferns grow close to the water or away from the water?
Do tree species, tree density, tree diameter, or tree height differ between north
and south facing slopes in ___?
Do temperatures differ between forested and non-forested streams in____?
Do birds sing more from 8:30-9:00 a.m. or from 3:00-3:30 p.m.?
How does Douglas-fir seed production time change as elevation changes in
the North Cascade Mountains?
How does dissolved oxygen change as water temperature goes up in ___
stream?
How do mouse populations change as hawk populations increase in Puget
Sound area?
How do heron populations change as eagle populations increase in the Puget
Sound watershed?
As elevations increase, how does the number of Grand Fir trees per acre
change in the South Cascades?
What is the relationship between number of days over 60 F in the spring and
germination of _____ seeds (or time of flowering)?
What is the relationship between the amount of sunshine and red color in
leaves in fall?
How does pH affect the number of salmon eggs hatching in a stream?
54


Section 2: Preparing Students to Conduct Field Investigations

Part 2: Descriptive Field Investigation
What Plants and Animals Use the Schoolyard Habitat?
Objectives

Learning Experience

Students will:

Students will conduct a descriptive investigation
by observing a particular outdoor area.

1) observe an outdoor area,
2) represent their observations using pictures,
numbers, words, labeled diagrams, and

Materials
Per Class
Field Guides

3) pose descriptive and comparative questions
based on their observations.

Per Pair of Students
Hula Hoops
Yard or Meter sticks
Tape Measures
Colored Pencils
Paint Chips (to help name as many different
forms of the “same” color, e.g., green)

Science Grade Level Expectation
Characteristics of Living Matter: Observe and
describe characteristics of living organisms.
Planning and Conducting Safe Investigations:
Plan and conduct an observational investigation
that collects information about characteristics or
properties.

Per Student
Clipboards
Ruler
Hand Lenses

Thinking Skills
Observing, Finding Evidence

Background
In descriptive field investigations researchers describe parts of a natural system. This lesson helps students
learn how to conduct a descriptive field investigation of a specific site. Although it is not a long-term study
focused on identification of organisms, students observe a large area and a small study area. Allowing
students to make observations multiple times helps them notice detail and ask investigative questions based
on their own observations of a habitat. By systematically collecting data over time at the same site, students
can begin to see patterns.
Breaking a large area into parts can help students consider different aspects of a larger ecosystem. Students
need multiple observation sessions outdoors in order to pose meaningful questions. Students could spend
multiple sessions observing a large study area, first noting their overall observations, then focusing on looking
up, looking down, and looking in the middle. Finally, students can select a much smaller study area for their
focused observation.

55


Lesson
Focus

1. Write the investigative question on the board: “What plants and animals use the school yard habitat?” Discuss
strategies for observing—using four of the five senses (sight, hearing, touch, smell) and recording observations
(drawing, using numbers, labeled diagrams writing). Hold up an object (e.g., pinecone, leaf, twig, rock) and
ask students to describe its physical properties and characteristics. To prompt student thinking you might
model drawing and/or writing observations as you ask:
· What does it look like? (e.g., size, shape, color)
· What does it feel like? (e.g. texture, temperature)
· What does it smell like?
· What does it sound like?

Large Study Area
Explore
2. Divide the class into pairs before going outside. Students spend multiple lesson sessions journaling
observations. Students can record measurements. They can use paint chips to name colors they observe in
nature. Providing a wide range of green paint chips for example helps to expand students’ color vocabulary
beyond “green.” Below are sentence starters that will help students generate questions about the system
(Fulwiler, 2007).
•

I am curious about . . .

•

It surprised me that . . .

•

I wonder how this part effects another part of the system . . .

•

Questions I could investigate are . . .

Day 1: Overall Observations. Students record general observations and questions.
Day 2: Looking Up. Students look up (above eye level) and record observations and questions.
Day 3: Looking Down. Students look down (to the ground) and record observations and questions.
Day 4: Looking in the Middle. Students look at eye level and record observations and questions.

Reflect
3. After each observation session ask students to share their findings and questions.
4. Categorize the questions students pose (descriptive, comparative, correlative, essential, why, researchable).

56


Type of Question

Examples

Book/Internet Research

What is the name of this tree or shrub?
How tall does this tree grow?
Where does this tree grow?

Essential-Life Pondering, Always Wonder

How do trees alter climate?

Descriptive

What do twigs look like in winter?
What plants live on this tree?
What animals use this tree for their habitat?
How does this tree produce seeds?

Comparative

Which type (species of tree) grows the fastest?
Are deciduous or broadleaf evergreen leaves stronger?

Correlative

How is tree fall leaf color related to the number of sunny days in
fall?
How is hot weather related to disease in pine trees?

Why Questions

Why are there deciduous and evergreen trees?

Special Study Area
Explore

5. Divide the class into pairs and give each pair a hula hoop and yard stick.
6. Students select a study area and place the yard stick in the middle of the hula hoop to create transect line
and two observation quadrats. Model this set up in the classroom before going outside; show students how
to record locations of plants and animals by noting the nearest inch on the yard stick (e.g. there are three
acorns, one at 4 inches, one at 15 inches and one at 22 inches).
7. Students record observations using written words/phrases, drawings, labeled diagrams, and numbers to
describe the area within the hula hoop, to contrast the two observation quadrats, or to note items along the
transect line.
8. Students use field guides to identify plants and animals.

Reflect
9. Students discuss the relationship they have noticed between the large study area and smaller special study
area. Ask students, what similarities and differences did you notice?
10. Students formulate two descriptive questions and two comparative questions about the larger study site
based upon their observations.
11. Ask students to reflect on the investigative question by writing or discussing, “What plants and animals use
the school yard habitat?”

57


Assessment
Review students’ observations for a range of representational forms including numbers, words, labeled
diagrams, and drawings. Descriptions might include size, shape, color texture, or smell. As you review student
work you can look for
 drawings fill the notebook page
 small objects/organisms are enlarged
 drawings are detailed
 parts of an organism/object are labeled
 color is added as appropriate
 drawings have captions or titles and note the date and place recorded

In addition, in discussion with students as they observe, you can assess their
insights and what they reflect about the quality of the observations.
5th grade students at Arlington Elementary School in Tacoma, Washington recorded counts of the animals in
Oak Tree Park and then generated questions based on their observations:
What is the most occurring plant at Oak Tree Park?
What are the life styles of the birds at Oak Tree Park?
What is the lifecycle of each species?
What are the eatable plants?
What mammals (not birds) do we see at Oak Tree Park in the spring?
How big is Oak Tree Park?
How many different kinds of trees are there?
What the most common tree?
What part of the forest do most birds live in during the spring time?
Why is Oak Tree Park a good habitat for plants and animals?
What kind of bird is not commonly seen in Oak Tree Park?
Is there water at the park during spring?
How many different animals live in the forest?
What is the most common plant you see at Oak Tree Park?
How many different types of birds are in Oak Tree Park?
How many different types of ants are there in Oak Tree Park?
What is the least common bird you see at Oak Tree Park?
How many total square miles is Oak Tree Park?
What kind of bird do we see in Oak Tree Park?
How many different species of plants are in Oak Tree Park.

58


Educator Insights
Below are insights shared by pre-service teachers who conducted the special study area investigation. The insights
are accompanied by comments about their observations.
“We measured the circumference of this tree and discovered the circumference is equal to our
height. We were really surprised; it looks so different in a circle.
”
Quantitative observations were used; numbers describe the physical characteristics of a tree and
demonstrate understanding of comparative measurement by comparing human height to tree
circumference.
“We’ve seen the effects of time in our space; things fly in and out of our space and the amount of
shade in our space has decreased.
”
This observation demonstrated awareness that places are not static, but instead are constantly
changing by citing two pieces of evidence (“things fly in and out” and amount of shade) to support a
claim that time effects what is observed.
“What is this—pollen or a seed? What is this tree that is dropping berries on us?”
By posing questions, pre-service teachers demonstrated a desire to identify the objects they observed.
By making detailed observations they could later conduct research to identify the object.
“Look at all the different green colors on this fern. We can’t just call them all green.
”
This careful observation demonstrated attention to nuanced color differences, rather than just labeling
an entire plant as green. They recognized a need for a larger color vocabulary to make accurate
descriptions.

59

Appendix C | What is a Problem Activity

Appendix C: What is a Problem? Activity

1. Write or post word problem on the board. Ask the students work with partners/small groups to define
problem.
2. Have students share their definitions, either by writing them on large paper (such as sentence strips) and
posting them or by writing them directly on the board.
3. Work with the students to compare the different definitions while discussing the common words/themes
present.
4. Ask the students if they have ever solved a problem? Have them explain to a neighbor the problem they
solved (briefly).
5. Discuss how scientists and engineers also solve problems. However, they define problem in a different way
(Post and share this definition):
A problem is a challenge that can be solved through the design process (which is a series of steps
used to define and solve a problem).
6. Compare the definition with the student definitions. Discuss as needed.
7. Explain that the students are actually going through the design process, called Project-Based Learning.
Then, work with the students to brainstorm a list of possible problems that engineers and/or scientists
(and even students) might use the design process to solve. For example:
• Building a bridge
• Reducing a certain type of pollution in a stream
• Constructing a more aerodynamic car
• Attracting birds to a site
• Reducing erosion
• Increasing the production of a garden
• Reducing animal damage on crops
• Getting rid of (or preventing the growth of ) non-native and/or invasive plants
• Determining the population and/or distribution of an animal population
• Constructing a new soccer field that will not flood
8. Conclude by revisiting the definition of problem (keeping it posted for the duration of the Project-Based
Learning Model process) and reminding the students that they will be defining and solving a problem with
their teams as they continue to work through the Project-Based Learning Model.

60


Appendix D: Change Over Time Activity

Student Instructions for Creating a Change Over Time Prediction Graph
If you were to watch a time-lapse video related to the problem you intend to solve, what would change over
time? Would something increase or decrease? To understand how the problem might impact other parts of the
ecosystem, you must first determine how the problem will change over a period of time. To predict these changes,
you can create a Change Over Time Prediction Graph:
1) Identify the part or characteristic of the problem (within the ecosystem) that you think is increasing
(growing) or decreasing (shrinking) over time.
Examples:
- the population (number) of invasive species plants in a location
- the number of students who play basketball during recess
- the diversity of birds that visit a birdfeeder
- the amount of garbage that gets dumped into a creek
2) Work with your team and/or teacher to determine the length of time you will use as you graph the
predicted changes within the ecosystem (1 year, 10 years, 100 years…).
3) Then, on your paper, write a title for your graph. Be as specific as possible, and be sure to include the
item/characteristic you think will change (what you are graphing), the location and the length of time.
For example, if you are predicting the change in the population of invasive species plants in a particular
location, your title could be: Predicted Changes in the Population of Invasive Species Plants on Weir
Prairie over 100 Years.
4) Draw an L-shaped graph and label the Y (vertical) axis with
what you’re graphing (such as Numbers of Invasive Species Plants). At the top of the line, label it ‘high’ or
‘many’ (or whatever fits your example). At the bottom of the line, of the line, label it ‘low’ or ‘none’ (or
whatever fits your example).
5) Then, label the X (horizontal) axis with the word ‘Time’, a dash and a clarification word such as ‘Days’ or
‘Years.’ Then add the numbers, such as 0 years on the left and 100 years on the right end of the line.

61

Appendix D | Change Over Time Activity

Predicted Changes in the Population of Invasive
Species Plants on Weir Prairie over 100 Year
high
Numbers of
invasive
species plants
low

0

Time - Years

100

6) You are now ready to create your graph, communicating what you think will happen over time. Draw a
line starting at 0 on the Time axis that shows how you think the item/characteristic of the ecosystem will
change. Will it increase in number? Decrease in number? Fluctuate?
Predicted Changes in the Population of Invasive
Species Plants on Weir Prairie over 100 Years
high
Numbers of
invasive
species plants
low

0

Time - Years

100

7) Once you have completed your graph, discuss the following with your team or class:
a. What do you predict will happen over time: In the short-term? In the long term?
b. What are the potential impacts on the ecosystem as a result of the changes you predict?
c. How might the item/characteristic of the ecosystem change if you DO influence the system (i.e.
attempt to solve the problem)?

62


65

Con ed project-based-learning--model

More Related Content

Similar to Con ed project-based-learning--model (20)

Recently uploaded (20)

Con ed project-based-learning--model