DCMS AKCP Product Presentation

Intelligent Monitoring Solutions for Your Enterprise Resources
Intelligent Monitoring Solutions for Your
Enterprise Resources

Intelligent Monitoring Solutions for Your Enterprise ResourcesIntelligent Monitoring Solutions for Your Enterprise Resources
About AKCP
AKCP established in the USA in 1981, created the market for networked
temperature, environmental and power monitoring solutions. Today with over
100 employees and 130,000 installations, AKCP is the world’s oldest and
largest manufacturer of SNMP enabled networked sensors for the data center.

About AKCP
Client base of 120,000
Offices in Philippines and Thailand
R & D in Bangkok, Thailand
Driven by innovation

AKCP SOLUTIONS
Environmental Monitoring
Security Monitoring
Power Monitoring
Access Control
Full SNMP compliant

AKCP Main Units
SensorProbe
SensorProbe+
SecurityProbe
Door Control Units
Intellegents Sensors

AKCP Features
Full integration with NMS
Intelligent Autosense function for
automatic configuration of sensors
Built-in logging
Built-in graphing of data

AKCP Features
Plug and Play
Ready to use out of the box
Web-based administration (no software)
Designed to run forever on its own
Cost effective
World-wide, unlimited life time support

Intelligent Notifications
Email
SMS
MMS
SNMP Trap
Text to Speech
Phone call with voice notification

sensorProbe2
• Includes Temperature Sensor (SP2T01), SNMP MIB and Integrated Software
• Supports all Major Communications Protocols
• Embedded Web Server
• Supports up to 2 Intelligent Sensors
• Supports up to 10 Dry Contact Inputs *Use two 5DCS sensors and the
DCUPGSP2 Code.
• Full SNMP v1 compliance
• Includes SNMP MIB
• Includes SNMP Utilities for setting and getting parameters
• Supports SNMP polling to allow sensor values to be collected and graphed
• Send Trap Notifications
• Send Email Notifications
• Include Sensor Description and current Sensor Values in Notifications
• User configurable Sensor Thresholds
• Use the built in “Continuous Time” feature to eliminating false alerts and
notifications
• Optional PoE (Power over Ethernet) that is IEEE 802.3af compliant
• 100MB Full Duplex Ethernet port

sensorProbe2+
sensorProbe with options
• IP based, including SNMPv3, HTTPS, VPN
• Send encrypted SNMP Trap and Email Notifications
• Supports 4 Intelligent Sensors or up to 20 Dry Contacts
• Optional cellular modem with external antenna
• Notification Wizards
• Front and Rear Thermal Mapping for any server cabinet
• Low Cost Daisy Chained Temperature sensors
• Optional Expansion Module connectivity
• Virtual Sensors

sensorProbe4
• Fully embedded TCP/IP and web-server.
• Built-in notification features – Email and SNMP traps.
• 4 auto-sense ports for connecting any AKCess Pro sensors.
• A new improved web-based interface for easy configuration and
monitoring.
• Continuous time feature on every sensor port to eliminate false
warning alerts.
• Login for User and Administrator for better security.
• Battery backed time of day clock for an accurate system date and
time.
• A standalone product without any external hardware and software
dependencies.
• Micro code firmware update over the Internet.
• Customized color configuration for displaying alerts.
• Network Management System Integration.

sensorProbe8
• Fully embedded TCP/IP and web-server.
• Built-in notification features – Email and SNMP traps.
• 8 auto-sense ports for connecting any AKCess Pro sensors.
• A new improved web-based interface for easy configuration and
monitoring.
• Continuous time feature on every sensor port to eliminate false
warning alerts.
• Login for User and Administrator for better security.
time.
dependencies.
• Micro code firmware update over the Internet.
• Customized color configuration for displaying alerts.
• Network Management System Integration

sensorProbe8-X20
• Fully embedded TCP / IP and Web Server
• Built-in notification Suite
• 8 autoSense ports for AKCess Pro sensors
• Web-Based Interface for easy configuration and monitoring
• Login for User and Administrator for increased security
time
dependencies
• Microcode firmware updates over the Internet
• Customized color configuration for displaying alerts
• Network Management System integration
• An additional 20, 2 wire dry contact input ports are provided, giving
a total of up to 28 dry contact ports

sensorProbe8-X60
• Fully embedded TCP / IP and Web Server
• Built-in notification Suite
• 8 autoSense ports for AKCess Pro sensors
• Web-Based Interface for easy configuration and monitoring
• Login for User and Administrator for increased security
time
dependencies
• Microcode firmware updates over the Internet
• Customized color configuration for displaying alerts
• Network Management System integration
• An additional 60, 2 wire dry contact input ports are provided, giving
a total of up to 68 dry contact ports

4x Sensor Ports for connecting AKCP sensors or swing handle cabinet locks
1x Expansion Out Port (Optionally used for Modbus)
1x 10/100 Ethernet Port
Max Sensors : Maximum of 150 onlined sensors, including Expansion Units and
virtual sensors.
Reduced to 50 if VPN is enabled
SPX+ Modules : GSM or CDMA 3G cellular data modem with external antenna
4x Sensor Ports module for connecting AKCP sensors or swing handle cabinet locks
10x or 20x Dry Contacts module, available in 3 configurations :
Configurable I/O dry Contact (0VDC/5VDC)
Input only 5V Dry Contact, opto-coupled input
Isolated input Dry Contact, from 5V to 20V voltage input signal
SensorProbeX

AKCP securityProbe 5E
• Embedded web server displays sensor information and live video from connected
cameras
• Control PTDZ cameras directly from the web interface
• Record digital video to remote servers or internal memory, or send live images to
your own website
• Connect Digital Cameras, and simultaneously display images up to 640×480
resolution
• Receive notifications of anomalous events via email, SMS / MMS, SNMP traps, and
many more
• Integrates with network management systems via SNMPv1 and Encrypted SNMPv3
• Stream video and sensor information directly to your cellphone or PDA
• Ability to connect external GPRS / GSM modem, Bluetooth and WiFi USB adapters
• Uses Linux operating system for maximum stability and flexibility
• Virtual Sensors monitor power, Modbus, network devices, and other SNMP based
equipment
• Built-in graphing and data logging, internally or to a remote PC
• Platform independent; free firmware upgrades and utilities from AKCess Pro
• Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16 and E-
Sensor 8 )
• Compatible with complete range of AKCess Pro Intelligent Sensors
• Full Modbus support : Modbus Master / Slave, Modbus RTU, Modbus over TCP / IP

AKCP securityProbe 5E-X20
• Embedded web server displays sensor information and live video from connected cameras
• Record digital video to remote servers or internal memory, or send live images to your own
website
• Connect Digital Cameras, and simultaneously display images up to 640×480 resolution
• Receive notifications of anomalous events via email, SMS / MMS, SNMP traps, and many
more
equipment
• Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16 and E-Sensor 8 )

AKCP securityProbe 5E-X60
• Embedded web server displays sensor information and live video from connected cameras
• Record digital video to remote servers or internal memory, or send live images to your own
website
• Connect Digital Cameras, and simultaneously display images up to 640×480 resolution
more
equipment
• Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16 and E-Sensor 8 )

AKCP securityProbe 5ES
• Receive notifications of anomalous events via email, SMS / MMS, SNMP traps,
and many more
• Integrates with network management systems via SNMPv1 and Encrypted
SNMPv3
• Ability to connect external GPRS / GSM modem, Bluetooth and WiFi USB
adapters
• Virtual Sensors monitor power, Modbus, network devices, and other SNMP
based equipment
• Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16 and
E-Sensor 8 )
• Full Modbus support : Modbus Master / Slave, Modbus RTU, Modbus over TCP /
IP

AKCP securityProbe 5ES-X20
• Embedded web server displays sensor information
and many more
SNMPv3
adapters
based equipment
E-Sensor 8 )
IP

AKCP securityProbe 5ES-X60
and many more
SNMPv3
adapters
based equipment
E-Sensor 8 )
IP

AKCP securityProbe 5ESV
cameras
• Record digital video to remote servers or internal memory, or send live images to
your own website
• Connect up to 4 High Definition Digital Cameras, and simultaneously display images
up to 640×480 resolution
• Receive notifications of anomalous events via email, SMS / MMS, SNMP traps, and
many more
equipment
Sensor 8 )

AKCP securityProbe 5ESV-X20
cameras
• Record digital video to remote servers or internal memory, or send live images to your
own website
• Connect up to 2 High Definition Digital Cameras, and simultaneously display images up
to 640×480 resolution
more
equipment
Sensor 8 )

AKCP securityProbe 5ESV-X60
and many more
SNMPv3
adapters
based equipment
E-Sensor 8 )
IP

AKCP E-Sensor8
• Expansion unit for SensorProbe, SecurityProbe Series
• Inputs:
• 8x RJ-45 ports for connecting AKCess Pro sensors
• 1x RJ-45 expansion module input (E-in)
• Output:
• Configurable output signals (0VDC/5VDC) on any of the
8 RJ-45 sensor ports
• 1 RJ-45 expansion module output (E-out)

AKCP E-Opto16
• The E-opto16 is an expansion board that adds 16 opto isolated dry
contact inputs to the securityProbe 5E.
The E-opto16 can be connected to any of the 4 RJ-45 expansion ports
located on the front panel of the securityProbe 5E base unit using
standard CAT5 LAN cable.

AKCP SecIO64/128/192
AKCP’s popular expansion units are now available in 64, 128, and 192 dry
contact versions making expansion easier than ever. The SECIO offers an
efficient and cost effective expansion solution with the lowest cost per
dry contact on the market today.
Inputs: 16 / 32 / 48 RJ-45 ports for connecting 4 Dry Contacts each (up to
5VDC) & 1x RJ-45 expansion module input (Expansion In)
The SECIO64/128/192 may also be daisy chained
using the E-Out / E-In Ports on other expansion
boards.
The SECIO modules can be extended up to 300
meters from the securityProbe base unit. There is
no limit to how many SECIO modules can be
connected to a single securityProbe. It depends
only on the number of sensors connected. A
maximum of 512 IO data points can be monitored
by the securityProbe base unit.

AKCP Environmental Sensors
Temperature Sensor
Temperature & Humidity Sensor
Thermocouple Sensor
Thermal Map
Rope Water Sensor
Locate Water Sensor
Airflow Sensor

Monitoring Thermal Map
Compatible only
for SensorProbeX

SNMP Temperature Sensor
Measurement
range
-55ºC to +75ºC
-67ºF to +167ºF
Measurement
accuracy
securityProbe series
±0.5°C accuracy from -10°C to +75°C
±0.9°F accuracy from +14°F to
+167°FsensorProbe series
±1°C accuracy from -10°C to +75°C
±1°F accuracy from +14°F to +167°F
Measurement
resolution
securityProbe series
0.5ºC increments
0.9ºF incrementssensorProbe series
1ºC increments
1ºF increments
• Semiconductor,
microprocessor
controlled type
temperature sensor
• Can be extended up to
1,000ft with standard
CAT5 cable
• Own SNMP OID for data
collection over a network
• 0.5ºC resolution Water resistant

daisyTemp Sensor
Up to 8 temperature sensors on one port
Measurement Range
Celsius
-55°C to +75°C
Measurement Resolution
Celsius
1°C increments
Measurement Accuracy
Celsius
±0.5°C accuracy from -10°C
to +75°C
Measurement Range
Fahrenheit
-67°F to +167°F
Measurement Resolution
Fahrenheit
1°F increments
Measurement Accuracy
Fahrenheit
±0.9°F accuracy from +14°F
to +167°F
One reading every
second
Daisy-chainable
temperature sensor with
free 5 ft cable
Never needs calibration
securityProbe auto
detects the presence of
the daisyTemp
Up to 8 daisyTemp
sensors per intelligent
sensor port, 64 sensors
per securityProbe
Flexible sensor cable
length using standard
CAT5e cable (maximum
500 ft for the total daisy-
chain)

SpotWater Detection
Measurement
Range
Wet or Dry ( -20°C +60°C)
Measurement
Accuracy
Able to measure distilled water
Sensor Type
Patent pending, microprocessor controlled,
capacitance measurement technology
Power source
Powered by the sensorProbe. No additional power
needed
Communication
s Cable
RJ-45 jack to sensor using UTP Cat 5 wire,
Maximum extension cable length 150m (500 ft.)
with approved low capacitance shielded cable or
UTP
Measurement
Rate
Multiple readings every second
sensorProbe auto detects the presence of the water
sensor
Up to 2 spotWater detectors per sensorProbe2, 8
per sensorProbe8 and securityProbe
Full autosense including disconnect alarm

RopeWater Sensor
Measurement
Range
Wet or Dry (-20 degrees C- +60 degrees C)
Measurement
Accuracy
Able to detect the presence or non-presence of water
Sensor Type Patent pending, capacitance measurement technology
Power
Consumption
Typical 125 mWatt, 25 mA
Communications
Cable
RJ-45 jack to main sensor module using UTP CAT5
cable. Maximum extension cable run length is 30 meters
(100 feet).Comes fully assembled including the Water
sensing rope, the non-sensing cable that connects the
rope to the sensing module and the main sensing
module that connects via CAT5 LAN cable to the
sensorProbe / securityProbe 5E.Sensing rope cable can
be pre-ordered from a 10 foot minimum to any custom
run length of up to 165 feet or 50 meters.

LocateWater Sensor
Find the specific position of water leaks over large area
Measurement Range Wet or Dry (-20 degrees C- +60 degrees C)
Measurement
Accuracy
Able to detect the presence of water at a specific location
Sensor Type Patent pending, capacitance measurement technology
Power Consumption Typical 125 mWatt, 25 mA
Communications
Cable
RJ-45 jack to main sensor module using UTP CAT5 cable. Maximum
extension cable length is 30 meters or 100 feet
Power Source
Powered by the sensorProbe, or securityProbe. No additional power
needed. Both units autodetects the presence of the ropeWater
sensor
Comes fully assembled and includes the rope portion that is the
water sensing cable, the non-sensing area cable (from the rope to
the sensing module) and the main sensing module
Sensing rope cable can be pre-ordered from a 10 foot minimum to
any custom run length (in multiples of 10 feet) of up to 160 feet
Non-sensing cable comes in a standard 20 foot run length

RopeFuel Sensor
The ropeFuel sensor detects the presence of liquid
hydrocarbon fuels at any point along its length
Cable Diameter 0.28 in. (7 mm) nominal
Operating
Temperature Range
-20°C to 60°C (-4° F to 140° F)
Pull Force Limit Not to exceed 50 lb
Bend Radius 2 in. (50 mm) minimum
Pressure
Loads greater than 20 lb (9 kg) per linear inch at 20°C (68°F) may
immediately trigger an alarm
Measurement
Accuracy
Capable of detecting the presence of fuel and oil at a specific
location within 1 meter, or 1 foot along the length of the sensing
rope
Sensor Type
Patent pending, microprocessor controlled capacitance
measurement technology
Nonresettable Must be replaced after exposure to hydrocarbon liquids
Power Consumption Typical 125 mWatt, 25 mA

J-K Thermocouple Adapters
Integrate third party thermocouple with your
securityProbe and sensorProbe+
Measurement
Rate
One reading every second
Accepts All Standard Size Male Connectors for Thermocouple
Types J and K
Designed to work with the securityProbe and securityProbe 5E
and E-sensor8 expansion modules only
Maximum
cable length
Up to 100 feet

Thermocouple Sensor
Industrial strength temperature sensor
Measurement
Rate
One reading every second
Measurement
Range Celsius
-200°C to +900°C
Measurement
Resolution
Celsius
+5°C/ -5°C
Measurement
Range
Fahrenheit
-328°F to 1472°F
Thermocouple
Type
K
Dimensions 0.61m x 4.5mm (sheath diameter)

Measurement
range :
0 to 100% Relative humidity
Resolution : 1%
Accuracy at : 25°C ±3%
Communication
s cable :
UTP Cat 5 cable
Power source :
Powered by the sensorProbe.
No additional power needed
Power
Consumption :
Typical 7.25 mWatt, 1.45mA
Sensor element wettable without
damage
sensorProbe auto detects the
presence of the dual sensor
Up to 2 dual sensors per
sensorProbe2, 8 per
sensorProbe8 and securityProbe
Humidity
Measurement
Range Celsius :
-40°C to +75°C
Measurement
Resolution
Celsius :
1°C
Measurement
Accuracy
Celsius :
Maximum ±2.3 at -40ºC,
minimum ±0.4 at +25ºC and
±1.7 at +75ºC
Measurement
Range
Fahrenheit :
-40°F to +167°F
Measurement
Resolution
Fahrenheit :
1°F increments
Measurement
Accuracy
Fahrenheit :
Maximum ±4.1 at -40ºF,
minimum ±0.9 at +25ºC and
±4 at +167ºF
Temperature
Single Port Temperature
and Humidity Sensor

Single Port Temperature and Humidity
Sensor (Water Resistant)
Water resistant dual sensor for damp environments
Measurement
Range Celsius
-40°C to +75°
Measurement
Resolution
Celsius
1°C
Measurement
Accuracy Celsius
Maximum ±2.3 at -40ºC, minimum
±0.4 at +25ºC and ±1.7 at +75ºC
Measurement
Range Fahrenheit
-40°F to +167°F
Measurement
Resolution
Fahrenheit
1°F increments
Measurement
Accuracy
Fahrenheit
Maximum ±4.1 at -40ºF, minimum
±0.9 at +25ºC and ±4 at +167ºF
Measurement
range
0 to 100% Relative humidity
Resolution 1%
Accuracy at 25°C ±3%
Communications
cable
UTP Cat 5 cable
Power source
Powered by the sensorProbe.
No additional power needed
Power
Consumption
Sensor element wettable without
damage
sensorProbe auto detects the
presence of the dual sensor
Up to 2 dual sensors per
sensorProbe2, 8 per
sensorProbe8 and
securityProbe
Humidity
Temperature

Air Velocity Transmitter
The Air Velocity Transmitter is designed for systems
that generate heat, and a steady flow of air is
necessary to dissipate this in order to maintain system
reliability and safety
Data Collection via Network Management
Measurement
Rate
one reading each second, data logging once per
minute
Communication
Cable
RJ45 jack to sensorProbe
Sensor Type Thermal Flow Chip
Sensor Power 24 VDC ±10% (power adapter included)
Current
Consumption
Typical 150mA
Installation
Method
For Duct-mounting
Housing Material PC fire-proof type
Housing
Dimensions
80mm x 80mm x 38mm
Weight 147g
Probe Length 224mm
Probe Material Stainless Steel
Trap Information
Warning sensor number, Sensor description,
Airflow(%)
• On/off and % thresholds alarm signal of
airflow
• Airflow data graphically displayed of
over time
• Accurate, cost effective flow sensing
• Includes Duct mounting bracket
• Base unit auto detects the presence of
the airflow sensor
• Up to 2 airflow sensors per
sensorProbe2, 8 per sensorProbe8 and
securityProbe
• Air Velocity Transmitter can be extended
to your desired cable length using one
of our CAT5 extension cables, CABXX,
or you can provide your own cable of
any length up to 60 feet

Airflow Sensor
The Airflow Sensor is designed for systems that
generate heat in the course of their operation and a
steady flow of air is necessary to dissipate this heat
generated
Power source
Powered by the
sensorProbe. No
additional power
needed
Power Consumption
Typical 429.50
mWatt, 85.90mA
Sensor type Thermistor / On or Off
Sensor power
Line power from
sensorProbe
Communication
Cable
RJ-45 jack to
sensorProbe
Trap Information
Warning sensor
number, Sensor
description, On or Off
condition.
Operating
temperature
-20°C to 60° C
• On/off alarm signal of airflow
• Accurate, cost effective flow sensing
• Operates from a single +5 V DC Power
Supply which powered by the sensorProbe
• 2 LEDs indicate the status of Airflow and that
the sensor is securely plugged into the
sensorProbe
• Electronics mounted in a small plastic case
• Sensor type – open/closed contact switch
• sensorProbe auto detects the presence of
the airflow sensor
• Up to 2 airflow sensors per sensorProbe2, 8
per sensorProbe8 and securityProbe
• Full autosense including disconnect alarm
• Data graphically displayed via a web page
• AFS00 can be extended to your desired
cable length using one of our CAT5 extension
cables, CABXX, or you can provide your own
cable of any length up to 60 feet

AKCP Security Sensors
Security Sensor
Motion Detector Sensor
Siren & Strobe Light
Universal Mount Camera
Pan-Tilt-Zoom Camera Interface

Security Sensor
Secure your doors and windows
Measurement Range Alarm or Normal
Communications
Cable
RJ45 jack to sensor using UTP Cat 5 wire
Sensor Type Open/closed contact switch
Power source Powered by the sensorProbe. No additional power needed
Power Consumption Typical 8.95 mWatt, 1.79mA
Measurement Rate Multiple readings every second
Maximum extension cable length 305m (1000 ft.) with approved
low capacitance shielded cable or UTP
sensorProbe auto detects the presence of the security sensor
Up to 2 security sensors per sensorProbe2, 8 per sensorProbe8
and securityProbe

RFID Swing Handle Lock
Supported
Cards :
EM-Card, 125Khz Proximity cards, 26bits
K4100/EM4100/EM4200/T5577
Proximity
Reading
Range :
0-3cm
Access
Control :
Up to 500 users
Ambient
Temperature :
-25°C to 75°C
Ambient
Humidity :
10%-90%
Built-in : RFID Antenna, Motor
Fail-Secure : Integrated key lock for manual override
LED Indicator : RGB Color LED : Lock status and Access Control status
Locking
Control :
Remote lock and unlock from the sensorProbe+ unit via Web
Interface, SNMP or AKCess Pro Server
Calendar enabled locking and unlocking control
Notification locking and unlocking control
Compatible
SensorProbe+
only

vibrationDetect Sensor
The AKCess Pro vibrationDetect sensor is designed
for protecting against forced entry
Circuit Normally-closed contact, momentary open when activated.
Contact
Pressure
Adjustable from 1 to 50 grams but recommended setting between 5
and 25 grams only. Supplied with pressure of approximately 6
grams.
Rated 1A at 50VDC
Contact Break
Time
Approximately 45ms maximum (at 6-grams of pressure)
Life Over 100,000 contacts
Contacts Pure silver
Case ABS resin.
Size 15mm(H) x 21mm(W) x 60mm(L)
Weight 20 grams.

PIR Hardware Motion Sensor
A Passive Infrared Motion Detector for your security
needs
Power Supply : Powered by sensorProbe / securityProbe
Power Consumption : Typical 51.40 mWatt, 10.28mA
Infrared sensor dual element
High sensitivity
Temperature : -20 °C~50 °C (4 °F~122 °F)
Dimensions : 65 mm × 60 mm x 35 mm
Detection angle : 60°
•Maximum working distance is 3 m (9 f)
•Maximum cable length of single motion detector sensor is 300 m
(1K f)
•Maximum total cable length of a string of 10 motion sensors is 46
m (150 f)
•Maximum length of cable between each motion sensor should
less
than 6 m (20 f)

Siren Strobe Light
Audio and visual alarm notification
Measurement Range Alarm or Normal
Communications
Cable
RJ45 jack to sensor using UTP Cat 5 wire
Sensor Type Open/closed contact switch
Power source Powered by the sensorProbe. No additional power needed
Measurement Rate Multiple readings every second
Alarmsound 100±3db@100cm
Strobe Flash
Frequency
“400 Times/Minute
Light Source Super bright LEDs x8
Maximum extension cable length 30m (100 ft.) with approved
low capacitance shielded cable or UTP
Up to 2 Siren Strobe sensors per sensorProbe2, 8 per

Smoke Detector
Accurate, cost effective Smoke Detector
Dry Contact Output 0.045mA
Main Housing Diameter 100mm, height 28mm
Battery lifetime
•Zinc Carbon battery: approx. 1 year
•Alkaline Energizer: approx. 4 years
•Lithium battery: approx. 10 years
Photoelectric Detector Type
Suitable for installation to BS 5839 pt 6
Grade F
Powered by sensor/securityProbe unit
and/or 9V Battery
Loud piercing 85db alarm at 3m
Full function test button
Alarm auto-reset
Insect resistant chamber
Missing battery lockout

AKCP Power Monitoring
4-20mA Current-to-Voltage Converter
DC Voltage Sensor
AC Voltage Monitor Sensor
Sensor Controlled Relay
Dry Contact Sensor

Dry Contact Sensors
Dry contact sensors are user definable
and can be used to detect many
different inputs
Measurement Range
:
Alarm or Normal
Communications
Cable :
RJ-45 jack to sensor using UTP Cat 5 wire
Sensor Type : Open/closed contact switch
Measurement Rate : Multiple readings every second
Current Range : Can sink up to 20 mAmps
Power Source : powered by the sensorProbe. No additional power needed
Input voltage range. 0 to 5 volts.
Normal input voltage is settable under software
Normally open, normally closed is settable under software
Up to 2 dry contact sensors per sensorProbe2, 8 per

Isolated DC Voltage Sensor
The Isolated Digital Voltmeter can be used by OEMs
and engineers to create their own custom data
collection systems
Isolation Voltage :1600 VDC
2 hardware
setting modes:
Wide Range Mode is -60 to +60 VDC with 0.01 V
resolution and 1% accuracy
High Resolution Mode is -5 to +5 VDC with 0.001 V
resolution and 1% accuracy
Communications
Cable :
RJ-45 jack to sensor using UTP CAT5/6 cable
Input Impedance :
1.6 MOhm when set at the high scale ( 60 Volt
maximum ) and 1.1 MOhm when set at the low scale
(5 volt maximum)
Maximum
Extension Cable :
run length is 60 feet with approved low capacitance
shielded cable or UTP
Measurement
Rate :
Multiple readings every second
Power Source :
Powered by the sensorProbe or securityProbe. No
additional power is needed. Up to 2 Digital Voltmeter
sensors per sensorProbe2, up to 8 per
sensorProbe8 and up to 8 per securityProbe and up
to 600 per securityProbe 5E (8 per E-sensor8
expansion board).
•Create custom data collection systems
•Powered by the securityProbe, no additional
power required
•The unit of a measured entity can be
customized to any text, e.g. Lbs for
measuring the pressure
•Send advanced alerts from the securityProbe
or AKCess Pro Server based upon set
thresholds
•Send SNMP traps and or email alerts from
the sensorProbe units based upon set
thresholds:
• SNMP interface for alarm/normal
status
• SNMP traps sent when status
changes
• SNMP polling via get available
• When an alarm condition is
activated, the description and
location of the fault can be sent via
email

4-20 mAmp Sensor
The 4-20 mAmp signal converter is used to integrate
the sensorProbe with a 4-20 mAmp transmitter
Input Current Range
:
+4 mA to +20 mA
Output Voltage
Range :
+0.8 V to +4.0 V
Linearity : ± 0.09 % Full Scale, Maximum
Accuracy : ± 0.15% Full Scale (± 0.3% Full Scale, Maximum)
Power Supply : +5 V DC
Power Consumption
:
Operating
Temperature :
-40°C to 85°C
Input Connector : Two terminal, Iin(+) and Iin(-), for current loop
Output Connector : RJ45 jack to converter using UTP Cat 5 wire
Mechanical
Dimensions :
65(W) x 62(H) x 15(D) mm Weight: 80 grams

5 Dry Contact Inputs
Ability to have up to 5 dry contact inputs per RJ45
on the SP2
Measurement Range
:
Alarm or Normal
Communications
cable :
RJ-45 jack to sensor using UTP Cat 5 wire
Sensor Type : Open / Closed contact switch
Input Voltage Range
:
0 to 5 volts
Power Source : Powered by the sensorProbe. No additional power needed
Normal input voltage is settable under software
Normally open, normally closed is settable under software
Up to 5 dry contact inputs per RJ-45 making upto 10 Dry
Contact Inputs in sensorProbe2

AC Voltage Sensor
The AC voltage detector is used to indicate
the presence or absence of line voltage
Measurement Range : Detects voltage at 50V AC to 250 VAC
Measurement Indication : Alarm or Normal
Communications Cable : RJ45 jack to sensor using UTP Cat 5 wire
Sensor Type : Open/closed contact switch
Power Source :
Powered by the sensorProbe. No additional
power needed
Power Consumption : Typical 11.35 mWatt, 2.27mA
LED indicator on sensor shows if voltage
present
sensorProbe auto detects the presence of
the voltage sensor
Up to 2 voltage detector per sensorProbe2,
up to 8 on the sensorProbe8

AC Controlled Relay
The Sensor Controlled Relay can control the electrical
power to devices managed over the Internet
• Relay designed to control mains line voltage –
110 VAC, in the US, 220 VAC in the EU
• IEC connector rating is 10 Amps for 220 VAC and
10 Amps for 110 VAC
• Operates from a single +5 V DC Power Supply
from the sensorProbe. Power cords supplied
support maximum 6 A
• Metal Oxide Varistors (MOVs) and snubber
circuit protect the open contacts of the relays
from high voltage spikes
• 4 LEDs indicate the status of the Relay, Power
Supply, AC Line Voltage and AC Load Voltage
• Up to 2 Sensor Controlled Relays per
sensorProbe2. Up to 8 Sensor Controlled Relays
per sensorProbe8, securityProbe, securityProbe
5E or E-sensor8 expansion module
• Full auto-sense including disconnect alarm
• IEC connector rating is 10
Amps for 220 VAC and 10
Amps for 110 VAC
• Contact Material AgCdO
• Carry Current 10 Amps
• Max. Operating Voltage 380
VAC, 125 VDC
• Max. Operating Current 10
Amps
• Max. Switching Capacity 4,000
VA, 480W with Resistive Load
2,000 VA, 240W with Inductive
Load (P.F=0.4)
• Power Consumption: Typical
471.00 mWatt, 94.20 mA
• 10 Amps Fuse 380 VAC, 125
VDC

8 Ports Sensor Controlled
Relay
The 8 Port Sensor Relay is specially designed multiport
relay for advanced process control
Power
Supply :
7.5VDC 3A (optional, needed if there are
more than 1 relay being used)
Dimensions
:
10.83″ x 5.43″ x 1.80″
Operating
Temperature
:
-40°C to 85°C
Storage
Temperature
:
-40°C to 85°C

IO-Digital8 Sensor
IO-Digital8 sensor with 8 ALARM/NORMAL indication
• SNMP interface for alarm/normal
status
• SNMP traps sent when critical
• SNMP polling via get command
• When an alarm condition is activated
the description and location of the
fault can be sent via email, SMS,
MMS, Skype, phone calls and other
advanced notifications from the
securityProbe 5E’s web interface
• Each of the 8 dry contacts on the IO-
digital8 sensor can also be
configured as outputs either 0 VDC
or 5 VDC and can sink up to 20 mA
of current when connected to a load
Measurem
ent range:
Alarm or Normal
Communi
cations
cable :
RJ45 jack to sensor using UTP Cat 5
wire, Maximum extension cable length
305m (1000 ft.) with approved low
capacitance shielded cable or UTP
Sensor
type :
Open/closed or cycles contact
switches
Input
voltage
range :
0 to 5 volts on each of the 8 dry
contacts
Current
Range :
Can sink up to 20 mAmps on each of
the 8 dry contacts

DC Sensor Controlled
Relay
The Sensor Controlled Relay can control the electrical
power to devices managed over the Internet
• Relay designed to control DC voltage up
to 250 VDC
• Operates from a single +5 V DC Power
Supply from the sensorProbe
• Metal Oxide Varistors (MOVs) and
snubber circuit protect the open
contacts of the relays from high voltage
spikes
• 4 LEDs indicate the status of the Relay,
Power Supply and DC Voltage
• Up to 2 Sensor Controlled Relays per
sensorProbe2. Up to 8 Sensor
Controlled Relays per sensorProbe8,
securityProbe 5E or E-sensor8
expansion module
• Full auto-sense including disconnect
alarm
Input
Voltage
Maximum 250 VDC
Output
Voltage
Maximum 250 VDC
Dimensions 115 x 80 x 40 mm
Operating
Temperature
-40°C to 85°C

Power Monitoring Sensor
Single Phase
Meter
Three Phase
Meter
Three Phase
Meter – CT
Type
Voltage(V)
Rated Voltage (Un) 230 VAC
230/400V AC
(3~)
230/400V AC
(3~)
Voltage range 0.7~1.3Un
161/279 –
300/520V AC
(3~)
161/279 –
300/520V AC
(3~)
Current(A)
Basic current (lb) 10A 10A 1.5A
Maximum current 100A 100A 6A
Operational Current
Range
0.4% Ib- lmax 0.4% Ib- lmax 0.4% Ib- lmax
Over Current
Withstand
30Imax for
0.01s
30Imax for
0.01s
30Imax for
0.01s
Internal Power
Consumption
≤2W / 10VA
≤2W / 10VA
per phase
≤2W / 10VA
per phase
Frequency(Hz)
50～60Hz
±10%
50Hz ±10% 50Hz ±10%
Standards IEC 62053-21 IEC 62053-21 IEC 62053-21
monitoring capable of
monitoring /
measuring :
• Phase Line
Voltages
• Current
• Power Factor
• Active Energy
• Active Power

Current Transformer
Monitoring :
• Sensing Overload
Currents
• Ground fault
detection
• Metering
• Analog to Digital
circuits
• Facilities and
building
management
Primary current : 100A-5000A
Secondary
current :
5A, 1A
Standard
approval :
IEC44-1, BS7626
Maximum
voltage :
0.72/3Kv
Frequency : 50/60Hz
Rated load : 1VA-30VA
Class : 0.5, 1.0, 3.0
Short-time
thermal current :
1th=100xln
Rated security
coefficient :
FS<5

AKCP Networks

AKCP Pro Server
The ultimate central dashboard control system
Monitor and control all your sensors and devices
Compatible with all AKCP devices
Easy and quick to install
Intuitive flexible interface
Add cameras for video security monitoring and
recording
Comprehensive Notification and Action/Alert
system

Data Centre Monitoring
Air-conditioning
Airflow
UPS
Power
Security – Visual, Motion, Entry Access
Siren & Strobe light Warnings
Water detection

SmartRack - ThermalMap

SmartRack – RFID Swing Lock

Door Control Unit
• Unlock doors remotely using software control.
• Connect a wide variety of electronic lock types.
• Expand using AKCP’s Door or Cabinet Expansion Modules.
• In / Out EM Card Reader ports granting one or two way access control.
• Connect up to two USB Fingerprint Readers for high security applications.
• Time and Attendance integration with AKCess Pro Server.
• Embedded web server displays sensor information. AKCess Pro Server (included free of charge)
can be used to view connected cameras.
• Control PTDZ cameras from AKCess Pro Server.
• Record digital video to remote servers or picture logs to internal memory. Alternatively send live
images to your own website or FTP.
• Receive notifications of anomalous events via email, SMS / MMS, SNMP traps, and many more.
• Integrates with network management systems via SNMPv1 and Encrypted SNMPv3.
• Ability to connect external cellular modems, Bluetooth and WiFi USB adapters.
• Uses Linux operating system for maximum stability and flexibility.
• Virtual Sensors monitor power, Modbus, network devices, and other SNMP based equipment.
• Built-in graphing and data logging, internally or to a remote PC.
• Platform independent; free firmware upgrades and utilities from AKCess Pro.
• Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16, E-Sensor 8, SECIO or
Cabinet Control Units )

Secure access to
data center
Access door and video review

Door Control Unit
RFID
Reader
Magnetic
Door
Lock
Door Release Keyswitch
Infra Red Exit
RFID Cards

Cabinet Control
Unit
• Arrange access by site, floors, rooms, or cabinets.
• Restrict access for certain times, days, users or security levels.
• Set up adjustable user groups with virtually any customizable preference
your company, group, or organization may need.
• AKCess Pro Server Management Software provides you with User /
Groups Management, User Access Schedules, Advanced Analytics,
Notifications, Real time video, Time-Stamped Video playback and much
more…Unlock doors remotely using software control.
• Connect a wide variety of electronic lock types.
• Time and Attendance integration with AKCess Pro Server.
AKCP’s Cabinet Control Unit
allows for card reader access to
be added to your server
cabinets.

ProbeSwitch
Turn off all notifications with a simple
turn of a key switch
• Works as a Dry Contact
• Connects to the securityProbe Series
• Saves time in maintenance situations
• Small and unobtrusive
• Powered by the securityProbe Units. No
additional power is needed.
• Full autosense feature including
disconnect alarm
Settings : Enabled or Disabled
Communications
Cable :
RJ45 jack to sensor using UTP Cat-5 wire
Maximum
Extension Cable :
305m (1000 ft.) with approved low
capacitance shielded cable or UTP.
Sensor Type : Key Lock Switch

Ultrasonic Fuel Level Sensor
By using the Ultrasonic Fuel Level
sensor you can ensure that your fuel
tanks are filled and ready for the most
critical moments.
• Ideal for remote sites that depend on backup generator power
• Normal, Low and Critical alerting
• Easy setup and installation
• Can monitor several liquids
• Monitor your tanks for critically low levels of liquid
• Requires 12V external power supply (included)
• Extremely low profile only 20mm high once mounted
• Operating distance of 0 mm to 2000 mm maximum
• Programmable tank dimensions via windows application
• Linear and non linear tank calibration at 5 levels
• Supports metal and plastic tanks
• Supports tanks wall thickness up to 6mm (or larger if spacer is used and top limit
adjusted)
• Industry standard SAE-5 stud mounting pattern with gasket seal and washers

Certification & Compatibility
Platform independent
Network Management System compatible
HP Openview
CA TNG Unicenter
IBM Tivoli
WhatsUp Gold
AdRem NetCrunch
Quest Software’s Big Brother

Contact Information
PT. DAYA CIPTA MANDIRI SOLUSI
Jalan Utan Kayu Raya No.26A
Jakarta Timur
Telp. 021-29622097
www.dayaciptamandiri.com
Email : askme@dayaciptamandiri.com
Mobile / WA : 0881-8857333

DCMS AKCP Product Presentation

More Related Content

What's hot (20)

Similar to DCMS AKCP Product Presentation (15)

More from Fanky Christian (20)

Recently uploaded (20)

DCMS AKCP Product Presentation