SlideShare a Scribd company logo
2
Most read
4
Most read
10
Most read
Design and Analyses of Polar,
Delta and Cartesian 3D printer
Submitted By:-
Shashank kapoor
Polar, Delta and Cartesian 3D Printer
Construction of Polar, Delta and Cartesian 3D Printer
Polar 3D Printer
• Structural frame of Cantilever
Type.
• Home position orientation is at
Center of the bed (0,0,0).
• Number of stepper Motors used
is 4.
• Works on the Polar
Coordinate System.
• Extruding mechanism consist of
GT2 Pulley.
• Consisting of a Circular Bed
type.
• Number of EndStops used 2.
• Polar use Smooth rod as a
Guiding Mechanism.
• Z-axis Movement use Lead
Screw .
• Y-axis Movement use Gear
Train .
Delta 3D Printer
• Structural frame of Hanging
Type.
• Home position orientation is at
Center of the bed (0,0,0).
• Number of stepper Motors used
is 4.
• Works on the Cartesian
Coordinate System.
• Extruding mechanism consist of
Spring Mechanism.
• Consisting of a Circular Bed
type.
• Number of EndStops used 4.
• Delta use Guiding Rails
as a Guiding Mechanism.
• Z-axis Movement use Belt
drive.
• Y-axis Movement use Belt
drive.
Cartesian 3D Printer
• Structural frame of Beam
Type.
• Home position orientation is at
Vertices of the bed
(0,0,0).
• Number of stepper Motors used
is 5.
• Works on the Cartesian
Coordinate System.
• Extruding mechanism consist of
GT2 Pulley.
• Consisting of a Rectangular
Bed type.
• Number of EndStops used 2+
Pinda Probe.
• Cartesian use Smooth rod as
a Guiding Mechanism.
• Z-axis Movement use Lead
Screw.
• Y-axis Movement use Belt
drive.
Contd…
• X-axis Movement use Rack
and Pinon arrangement.
• Smooth Rod used in Z-axis and
Radius in case of polar 3D
Printer.
• Total number of common parts:-
1 Fan
1 Printer Board
3 End Stops
1 Thermistor
1 Extruder
Contd…
• X-axis Movement use Belt
drive arrangement.
• Smooth Rod used in Z-axis ,Y-
axis and X-axis in case of delta
3D Printer.
• Total number of common parts:-
2 Fan
1 Printer Board
4 End Stops
1 Thermistor
1 Extruder
Contd…
• X-axis Movement use Belt
drive arrangement.
• Smooth Rod used in Z-axis ,Y-
axis and X-axis in case of
Cartesian 3D Printer.
• Total number of common parts:-
2 Fan
1 Printer Board
3 End Stops
2 Thermistor
1 Extruder
Comparative Study and analyses of Polar, Delta
and Cartesian 3D Printer
• The material used Red, Green and White PLA filament of 1.75mm diameter .
•The machines printing prameters:-
# Extruder nozzles size 0.4 mm diameter
# Printing Speed - 60 mm/s
# Layer Thickness - 0.2 mm
# Infill Density- 100%
# Extrusion Temperature- 195°C
# Bed temperature of prusa MK2S is 60°C
# Bed temperature of Micro make D1 and Polar3D was room temperature as
these model not contain heating element.
Design and analysis of polar, cartesian and delta 3d printer
Contd…
60 min
34 min
52 min
0
10
20
30
40
50
60
70
Cartesian Polar Delta
Printing Time for
Experimental Job
Cartesian
Polar
Delta
Cartesian 60 min
Polar 34 min
Delta 52 min
Contd….
Contd….
Printing Time for Different System of Printers
System infill 20% infill 40% infill 60% infill 80% infill
Cartesian Printer 31 min 37 min 41 min 39 min
Delta Printer 47 min 48 min 45 min 47 min
Polar Printer 17 min 20 min 26 min 30 min
31 min
37 min
41 min 39 min
47 min 48 min
45 min 47 min
17 min
20 min
26 min
30 min
0
10
20
30
40
50
60
20% infill 40% infill 60% infill 80% infill
Printing
time
in
(min)
Printing Time for different system of printers
Cartesian Printer
Delta Printer
Polar Printer
Contd…
Actal size of Percentage Error for Different System of Printers
Specimen System infill 20% infill 40% infill 60% infill 80% infill
Cartesian Printer
(%Δ in length) -0.24% -1.02% -1.42% -1.34%
( %Δ in width) -0.24% 0.47% 0.47% 0.31%
(%Δ in height) -0.51% -0.24% 0.32% 0.20%
l=12.7mm (%Δ in volume) -0.96% -0.78% -0.62% -0.83%
b=12.7mm
Delta Printer
(%Δ in length) -1.34% -0.39% -0.24% -0.47%
h= 25.4 mm ( %Δ in width) 1.34% 0.79% 0.55% 0.79%
volume=4.096 cm^3 (%Δ in height) 0.08% -0.35% -0.08% -0.35%
(%Δ in volume) 0.08% 0.05% 0.25% -0.03%
Polar Printer
(%Δ in length) 2.52% 4.02% 3.39% 4.57%
( %Δ in width) 2.05% 2.52% 2.76% 3.07%
(%Δ in height) -4.96% -3.58% -3.54% -3.70%
(%Δ in volume) -0.55% 2.83% 2.49% 3.81%
Contd….
Contd…..
Printing time of Different System of Printers
40 mm/sec 60 mm/sec 80 mm/sec 100 mm/sec
20% infill
Cartesian Printer 31 min 31 min 31 min 31 min
Delta Printer 42 min 46 min 46 min 42 min
Polar Printer 19 min 19 min 19 min 21 min
On the Basis of printing speed
31 min 31 min 31min 31 min
42min
46 min 46 min
42 min
19 min 19 min 19 min
21 min
0
5
10
15
20
25
30
35
40
45
50
40 mm/sec 60 mm/sec 80 mm/sec 100 mm/sec
Printing
time
in
(min)
Printing Time for different system of printers
Cartesian Printer
Delta Printer
Polar Printer
Contd…
Actal size of Percentage Error for Different System of Printers
Specimen System infill 40 mm/sec 60 mm/sec 80 mm/sec 100 mm/sec
Cartesian Printer
(%Δ in length) -1.97% -2.05% -0.79% -1.97%
( %Δ in width) 0.39% 0.47% 0.16% 0.39%
(%Δ in height) 0.63% -0.67% 0.24% -0.08%
l=12.7mm (%Δ in volume) -0.94% -2.22% -0.38% -1.64%
b=12.7mm
Delta Printer
(%Δ in length) 0.39% 0.87% 0.71% -0.08%
h= 25.4 mm ( %Δ in width) 0.08% 0.08% 0.39% 0.94%
volume=4.096 cm^3 (%Δ in height) -0.16% -0.39% -0.04% -0.83%
(%Δ in volume) 0.33% 0.57% 1.08% 0.05%
Polar Printer
(%Δ in length) 1.89% 1.42% 1.65% 2.68%
( %Δ in width) 2.20% 2.36% 1.73% 2.60%
(%Δ in height) -3.46% -3.07% -2.83% -3.31%
(%Δ in volume) 0.55% 0.64% 0.50% 1.88%
Contd….
Thank you

More Related Content

PPTX
Principle of regenerative braking and chopper configuration
PDF
MACHINE DESIGN QUESTION BANK ...
PDF
ME6601 - DESIGN OF TRANSMISSION SYSTEM NOTES AND QUESTION BANK
PDF
Summer Training Report on Indian Railways , C& W Workshop, NBQ, Assam
PPTX
Standards & Codes An Overview to Materials and Machine design
PDF
Adoption of Park’s Transformation for Inverter Fed Drive
PDF
Theory of machines solution ch 11
DOCX
MOMENT INERTIA OF A FLYWHEEL LAB REPORT
Principle of regenerative braking and chopper configuration
MACHINE DESIGN QUESTION BANK ...
ME6601 - DESIGN OF TRANSMISSION SYSTEM NOTES AND QUESTION BANK
Summer Training Report on Indian Railways , C& W Workshop, NBQ, Assam
Standards & Codes An Overview to Materials and Machine design
Adoption of Park’s Transformation for Inverter Fed Drive
Theory of machines solution ch 11
MOMENT INERTIA OF A FLYWHEEL LAB REPORT

What's hot (20)

PDF
BHEL summer internship report
PDF
Unit 2.3 Design of Coupling
PPTX
Power factor
DOCX
Undeterminate problems
PDF
Numerical examples
PDF
Study and Analysis of Automotive Seating System Riser Design & Development fo...
PPTX
Vacuum chamber design
PDF
Regenerative Braking of BLDC Motors
PDF
Swep report
PDF
BHEL SUMMER TRAINING REPORT
PPTX
Multi quadrant Dynamics
PDF
ME6603 - FINITE ELEMENT ANALYSIS UNIT - I NOTES AND QUESTION BANK
PPT
Industrial training ppt.
PPTX
Fundamentals of Electric Drives and its applications.pptx
DOCX
Electric Loco Shed, Tughlakabad, New Delhi
PDF
ME6503 - DESIGN OF MACHINE ELEMENTS UNIT - V NOTES
PPTX
22564 emd 1.9 numericals
DOC
EEE graduates career options
PDF
Design and Fabrication of Pneumatic Bar Bending Machine
PDF
Internship Report_Jyoti CNC Automation Pvt Ltd
BHEL summer internship report
Unit 2.3 Design of Coupling
Power factor
Undeterminate problems
Numerical examples
Study and Analysis of Automotive Seating System Riser Design & Development fo...
Vacuum chamber design
Regenerative Braking of BLDC Motors
Swep report
BHEL SUMMER TRAINING REPORT
Multi quadrant Dynamics
ME6603 - FINITE ELEMENT ANALYSIS UNIT - I NOTES AND QUESTION BANK
Industrial training ppt.
Fundamentals of Electric Drives and its applications.pptx
Electric Loco Shed, Tughlakabad, New Delhi
ME6503 - DESIGN OF MACHINE ELEMENTS UNIT - V NOTES
22564 emd 1.9 numericals
EEE graduates career options
Design and Fabrication of Pneumatic Bar Bending Machine
Internship Report_Jyoti CNC Automation Pvt Ltd
Ad

Similar to Design and analysis of polar, cartesian and delta 3d printer (20)

PDF
3d printer
PDF
Introduction to Manufacturing Systemsshaping machine.pdf
PPT
Tapers and taper_turning
PDF
Production Technology, chapter 5.pdf
PPTX
3d Printing technology, materials and slicer
DOCX
Carding (1)
PPTX
Manufacturimg of comressor blade presentation 4 - copy
PPTX
Shaper Machine(1) by aksah saha and masud .pptx
PDF
Cutting Room Capacity Planning and Apparel Production Process
PPTX
Introduction to Lathe Machine basic to advance.pptx
PPTX
A presentation on Lathe Machine working .pptx
PDF
Cutting
PPTX
Internet of Things, TYBSC IT, Semester 5, Unit III
PPTX
AMP\AMP 2nd chapter.pptx
PPT
Cutting Machines
PPTX
More 3D Printer Stuff
PPTX
Fabric cutting
PDF
Manufacturing systems milling operation.pdf
PPT
Lathe Machine Tool - A comprehensive study of the tool
PPTX
Cutting technology in garment industry
3d printer
Introduction to Manufacturing Systemsshaping machine.pdf
Tapers and taper_turning
Production Technology, chapter 5.pdf
3d Printing technology, materials and slicer
Carding (1)
Manufacturimg of comressor blade presentation 4 - copy
Shaper Machine(1) by aksah saha and masud .pptx
Cutting Room Capacity Planning and Apparel Production Process
Introduction to Lathe Machine basic to advance.pptx
A presentation on Lathe Machine working .pptx
Cutting
Internet of Things, TYBSC IT, Semester 5, Unit III
AMP\AMP 2nd chapter.pptx
Cutting Machines
More 3D Printer Stuff
Fabric cutting
Manufacturing systems milling operation.pdf
Lathe Machine Tool - A comprehensive study of the tool
Cutting technology in garment industry
Ad

More from Shashank Kapoor (17)

PPTX
Foldable 3d Printer for fused deposition modelling
PPTX
DETD Polar 3d Printer for Additive Manufacturing
PDF
Rural engineering process : Development of farms by automation
PPTX
Cfc’s and hcfc’s
PPTX
Multi processor scheduling
PPTX
Nano 3d printing : Two Photon lithography
PDF
MQTT Protocol: IOT Technology
PDF
Real time Canny edge detection
DOCX
Training report of C language
PDF
Real time heart monitoring system
DOCX
IFTTT: If This Then That
DOCX
Project management : Pert and Cpm
PDF
Bushed pin flange coupling
PPTX
Jigs and there application
PPTX
Pert and cpm
PPTX
Air cooling of electrical equipments
PPTX
Mach Number and Shock waves
Foldable 3d Printer for fused deposition modelling
DETD Polar 3d Printer for Additive Manufacturing
Rural engineering process : Development of farms by automation
Cfc’s and hcfc’s
Multi processor scheduling
Nano 3d printing : Two Photon lithography
MQTT Protocol: IOT Technology
Real time Canny edge detection
Training report of C language
Real time heart monitoring system
IFTTT: If This Then That
Project management : Pert and Cpm
Bushed pin flange coupling
Jigs and there application
Pert and cpm
Air cooling of electrical equipments
Mach Number and Shock waves

Recently uploaded (20)

PPTX
web development for engineering and engineering
PDF
Model Code of Practice - Construction Work - 21102022 .pdf
PDF
BMEC211 - INTRODUCTION TO MECHATRONICS-1.pdf
PPTX
Construction Project Organization Group 2.pptx
PDF
Mitigating Risks through Effective Management for Enhancing Organizational Pe...
PDF
The CXO Playbook 2025 – Future-Ready Strategies for C-Suite Leaders Cerebrai...
PPTX
Geodesy 1.pptx...............................................
PDF
Mohammad Mahdi Farshadian CV - Prospective PhD Student 2026
PPTX
Sustainable Sites - Green Building Construction
PPTX
M Tech Sem 1 Civil Engineering Environmental Sciences.pptx
DOCX
573137875-Attendance-Management-System-original
PDF
Embodied AI: Ushering in the Next Era of Intelligent Systems
PPTX
KTU 2019 -S7-MCN 401 MODULE 2-VINAY.pptx
PPTX
Engineering Ethics, Safety and Environment [Autosaved] (1).pptx
PPTX
UNIT 4 Total Quality Management .pptx
PPTX
Internet of Things (IOT) - A guide to understanding
PDF
SM_6th-Sem__Cse_Internet-of-Things.pdf IOT
PDF
July 2025 - Top 10 Read Articles in International Journal of Software Enginee...
PDF
Well-logging-methods_new................
PDF
PPT on Performance Review to get promotions
web development for engineering and engineering
Model Code of Practice - Construction Work - 21102022 .pdf
BMEC211 - INTRODUCTION TO MECHATRONICS-1.pdf
Construction Project Organization Group 2.pptx
Mitigating Risks through Effective Management for Enhancing Organizational Pe...
The CXO Playbook 2025 – Future-Ready Strategies for C-Suite Leaders Cerebrai...
Geodesy 1.pptx...............................................
Mohammad Mahdi Farshadian CV - Prospective PhD Student 2026
Sustainable Sites - Green Building Construction
M Tech Sem 1 Civil Engineering Environmental Sciences.pptx
573137875-Attendance-Management-System-original
Embodied AI: Ushering in the Next Era of Intelligent Systems
KTU 2019 -S7-MCN 401 MODULE 2-VINAY.pptx
Engineering Ethics, Safety and Environment [Autosaved] (1).pptx
UNIT 4 Total Quality Management .pptx
Internet of Things (IOT) - A guide to understanding
SM_6th-Sem__Cse_Internet-of-Things.pdf IOT
July 2025 - Top 10 Read Articles in International Journal of Software Enginee...
Well-logging-methods_new................
PPT on Performance Review to get promotions

Design and analysis of polar, cartesian and delta 3d printer

  • 1. Design and Analyses of Polar, Delta and Cartesian 3D printer Submitted By:- Shashank kapoor
  • 2. Polar, Delta and Cartesian 3D Printer
  • 3. Construction of Polar, Delta and Cartesian 3D Printer Polar 3D Printer • Structural frame of Cantilever Type. • Home position orientation is at Center of the bed (0,0,0). • Number of stepper Motors used is 4. • Works on the Polar Coordinate System. • Extruding mechanism consist of GT2 Pulley. • Consisting of a Circular Bed type. • Number of EndStops used 2. • Polar use Smooth rod as a Guiding Mechanism. • Z-axis Movement use Lead Screw . • Y-axis Movement use Gear Train . Delta 3D Printer • Structural frame of Hanging Type. • Home position orientation is at Center of the bed (0,0,0). • Number of stepper Motors used is 4. • Works on the Cartesian Coordinate System. • Extruding mechanism consist of Spring Mechanism. • Consisting of a Circular Bed type. • Number of EndStops used 4. • Delta use Guiding Rails as a Guiding Mechanism. • Z-axis Movement use Belt drive. • Y-axis Movement use Belt drive. Cartesian 3D Printer • Structural frame of Beam Type. • Home position orientation is at Vertices of the bed (0,0,0). • Number of stepper Motors used is 5. • Works on the Cartesian Coordinate System. • Extruding mechanism consist of GT2 Pulley. • Consisting of a Rectangular Bed type. • Number of EndStops used 2+ Pinda Probe. • Cartesian use Smooth rod as a Guiding Mechanism. • Z-axis Movement use Lead Screw. • Y-axis Movement use Belt drive.
  • 4. Contd… • X-axis Movement use Rack and Pinon arrangement. • Smooth Rod used in Z-axis and Radius in case of polar 3D Printer. • Total number of common parts:- 1 Fan 1 Printer Board 3 End Stops 1 Thermistor 1 Extruder Contd… • X-axis Movement use Belt drive arrangement. • Smooth Rod used in Z-axis ,Y- axis and X-axis in case of delta 3D Printer. • Total number of common parts:- 2 Fan 1 Printer Board 4 End Stops 1 Thermistor 1 Extruder Contd… • X-axis Movement use Belt drive arrangement. • Smooth Rod used in Z-axis ,Y- axis and X-axis in case of Cartesian 3D Printer. • Total number of common parts:- 2 Fan 1 Printer Board 3 End Stops 2 Thermistor 1 Extruder
  • 5. Comparative Study and analyses of Polar, Delta and Cartesian 3D Printer • The material used Red, Green and White PLA filament of 1.75mm diameter . •The machines printing prameters:- # Extruder nozzles size 0.4 mm diameter # Printing Speed - 60 mm/s # Layer Thickness - 0.2 mm # Infill Density- 100% # Extrusion Temperature- 195°C # Bed temperature of prusa MK2S is 60°C # Bed temperature of Micro make D1 and Polar3D was room temperature as these model not contain heating element.
  • 7. Contd… 60 min 34 min 52 min 0 10 20 30 40 50 60 70 Cartesian Polar Delta Printing Time for Experimental Job Cartesian Polar Delta Cartesian 60 min Polar 34 min Delta 52 min
  • 9. Contd…. Printing Time for Different System of Printers System infill 20% infill 40% infill 60% infill 80% infill Cartesian Printer 31 min 37 min 41 min 39 min Delta Printer 47 min 48 min 45 min 47 min Polar Printer 17 min 20 min 26 min 30 min 31 min 37 min 41 min 39 min 47 min 48 min 45 min 47 min 17 min 20 min 26 min 30 min 0 10 20 30 40 50 60 20% infill 40% infill 60% infill 80% infill Printing time in (min) Printing Time for different system of printers Cartesian Printer Delta Printer Polar Printer
  • 10. Contd… Actal size of Percentage Error for Different System of Printers Specimen System infill 20% infill 40% infill 60% infill 80% infill Cartesian Printer (%Δ in length) -0.24% -1.02% -1.42% -1.34% ( %Δ in width) -0.24% 0.47% 0.47% 0.31% (%Δ in height) -0.51% -0.24% 0.32% 0.20% l=12.7mm (%Δ in volume) -0.96% -0.78% -0.62% -0.83% b=12.7mm Delta Printer (%Δ in length) -1.34% -0.39% -0.24% -0.47% h= 25.4 mm ( %Δ in width) 1.34% 0.79% 0.55% 0.79% volume=4.096 cm^3 (%Δ in height) 0.08% -0.35% -0.08% -0.35% (%Δ in volume) 0.08% 0.05% 0.25% -0.03% Polar Printer (%Δ in length) 2.52% 4.02% 3.39% 4.57% ( %Δ in width) 2.05% 2.52% 2.76% 3.07% (%Δ in height) -4.96% -3.58% -3.54% -3.70% (%Δ in volume) -0.55% 2.83% 2.49% 3.81%
  • 12. Contd….. Printing time of Different System of Printers 40 mm/sec 60 mm/sec 80 mm/sec 100 mm/sec 20% infill Cartesian Printer 31 min 31 min 31 min 31 min Delta Printer 42 min 46 min 46 min 42 min Polar Printer 19 min 19 min 19 min 21 min On the Basis of printing speed 31 min 31 min 31min 31 min 42min 46 min 46 min 42 min 19 min 19 min 19 min 21 min 0 5 10 15 20 25 30 35 40 45 50 40 mm/sec 60 mm/sec 80 mm/sec 100 mm/sec Printing time in (min) Printing Time for different system of printers Cartesian Printer Delta Printer Polar Printer
  • 13. Contd… Actal size of Percentage Error for Different System of Printers Specimen System infill 40 mm/sec 60 mm/sec 80 mm/sec 100 mm/sec Cartesian Printer (%Δ in length) -1.97% -2.05% -0.79% -1.97% ( %Δ in width) 0.39% 0.47% 0.16% 0.39% (%Δ in height) 0.63% -0.67% 0.24% -0.08% l=12.7mm (%Δ in volume) -0.94% -2.22% -0.38% -1.64% b=12.7mm Delta Printer (%Δ in length) 0.39% 0.87% 0.71% -0.08% h= 25.4 mm ( %Δ in width) 0.08% 0.08% 0.39% 0.94% volume=4.096 cm^3 (%Δ in height) -0.16% -0.39% -0.04% -0.83% (%Δ in volume) 0.33% 0.57% 1.08% 0.05% Polar Printer (%Δ in length) 1.89% 1.42% 1.65% 2.68% ( %Δ in width) 2.20% 2.36% 1.73% 2.60% (%Δ in height) -3.46% -3.07% -2.83% -3.31% (%Δ in volume) 0.55% 0.64% 0.50% 1.88%