Dvr user manual

User Manual
1/57
Menu
1. Production Introduction........................................................................................................................................................3
2. Installation.............................................................................................................................................................................. 3
2.1. HDD Installation..............................................................................................................................................................3
2.2. 2.1 Front panel................................................................................................................................................................3
2.2 2.2Rear panel..................................................................................................................................................................4
2.3. Remote Operation..............................................................................................................................................................5
2.4. Previewing window Icon Description..........................................................................................................................5
3. Fast Operation.......................................................................................................................................................................5
3.1. Login.................................................................................................................................................................................... 5
3.1.1. Normal Login...................................................................................................................................................................6
3.1.2. Temporary Login............................................................................................................................................................ 7
3.2. Menu Operation..................................................................................................................................................................7
3.2.1. View Layout.....................................................................................................................................................................8
3.2.2. Sequence Interval.......................................................................................................................................................... 8
3.2.3. Video Adjust.................................................................................................................................................................... 8
3.2.4. PTZ................................................................................................................................................................................... 9
3.2.5. Clients.............................................................................................................................................................................11
3.2.6. Snapshot........................................................................................................................................................................11
3.2.7. Record Function........................................................................................................................................................... 13
3.2.8 Clear Alarm.....................................................................................................................................................................18
3.2.9 Shutdown........................................................................................................................................................................18
4 System Setup........................................................................................................................................................................18
4.1 Functional Structure.....................................................................................................................................................19
4.2 General............................................................................................................................................................................... 19
4.2.2 Time.................................................................................................................................................................................20
4.2.3 User................................................................................................................................................................................. 21
4.3 Channel............................................................................................................................................................................... 23
4.3.1 Preview setting...............................................................................................................................................................25
4.3.2 Stream setting................................................................................................................................................................26
4.3.3 Audio setting...................................................................................................................................................................30
4.4.1 Network setting.............................................................................................................................................................. 33
4.4.2 Network service............................................................................................................................................................. 33
4.5 Alarm................................................................................................................................................................................... 36
4.5.1 Motion detection............................................................................................................................................................ 36
4.5.2 No video..........................................................................................................................................................................39
4.5.3 Alarm device...................................................................................................................................................................40
4.5.4 Alarm task.......................................................................................................................................................................43
4.5.5 E-mail alert......................................................................................................................................................................43
4.6 System................................................................................................................................................................................. 44
4.6.1 Log:.................................................................................................................................................................................. 44
4.6.2 Maintenance...................................................................................................................................................................47
4.6.3 Information:.....................................................................................................................................................................49
4.7 Device................................................................................................................................................................................. 50

User Manual
2/57
4.7.1 Storage............................................................................................................................................................................51
4.7.2 PTZ.................................................................................................................................................................................. 51
4.7.3 Other devices.................................................................................................................................................................53
6 Appendices............................................................................................................................................................................56
6.5 Calculate hard disk capacity.....................................................................................................................................57
6.5.1 Hard disk capacity convert...........................................................................................................................................57
6.5.2 Required capacity for video recording.......................................................................................................................57

User Manual
3/57
1.Production Introduction
Network DVR is a monitoring product that allows audio and video synchronized. It adopts embedded and
micro processor, so system runs more steadily. This product integrates functions such as video & audio,
network transmission, alarming management, etc. Meanwhile, it has the features of DVR and DVS. It can not
only work alone, but also can be networked to a powerful security monitoring network. It is widely used in
school, factory, supermarket, bank, traffic, water conservancy facilities, residential area, and warehouse
department, etc.
2.Installation
2.1.HDD Installation
1． Ensure Power supply has been disconnected, open the case cover;
2． Connect HDD data line, power line first , then fix the HDD in the case;
3． Install the cover, connect the power, which with adaptor, press the power switch;
4． Formatting the HDD (Please check details from : System Setup—Peripheral—Storage
Device—Formatting );
5． Network DVR can normally make snapshot and video.
2.2.2.1 Front panel
The front panel of A series
(1) Search (2) PTZ (3) INFO (4) REC
(5) Shift (6) Power (7)Direction (8) Menu
(9) ESC (10)Play/Pause (11)Back/Pause (12)Fast
(13) Play (14)Next (15)Back

User Manual
4/57
2.2 2.2Rear panel
The rear panel of 4CH series
1 Fan 2 Video Input 3 Audio
Output
4 HDMI 5 Audio Input 6 USB
7 PTZ
RS485
8 DC 12V 9 Power
Switch
10 LAN 1
1
VGA 1
2
Video
Output
2.3 Remote Operation
No. Name Description
1 POWER Press for about 3-5 seconds to shut down the DVR.
2 DEV
Device match ID, can make the Remote and DVR one-to-one control, take
【4.6.3.2 Device No.】for reference.
3 No. Key
1.can make the channel full screen
2.can input numbers and English character.
4 ALL Switch to multi-channels mode
5 MENU
Press this key , it will recycling show Right Click Menu, Main Menu and
Status Menu
6 ESC Close the upper operation interface;
7
Direction
Keys
1. To simulate mouse moving;
2. Select PTZ channel, while no interface can make PTZ turning.
OK is confirm/select function
8 FN Popup system settings screen
9
Playback
Key
In turns:
Play/back Play Pause
Frame play Fast Forward Fast Backward
Play Slowly Stop REC
10 PTZ
ZOOM+/-: Adjust PTZ camera lens distance;
Cruise: open/close cruise line
11 SHIFT Switch between English uppercase letters and lowercase letters

User Manual
5/57
2.4 Previewing window Icon Description
Icon Description
Means recording
Means client-end is linking this channel.
(Yellow) means that this channel is set alarm, but is not triggered
(Red) Means the alarm is triggered.
Means this window voice monitoring close.
Means this window voice monitoring open.
3.Fast Operation
3.1 Login
3.1.1 Normal Login
After starting system, it will popup [Login] screen, after user login can make other operation.
Remarks: If cancel [System Setup/General/General/Display Wizard] function, the login prompt won’t
given unless users operate the DVR.
Steps:
1. [User Name] input default user name ‘admin’;
2. [Password] is empty, that is nothing input;
3. Single click [Login], then finish login operation.
Remarks: If login failure for 3 times, mouse will be locked for 10 seconds, DVR will alarm until
login successfully .
3.1.2 Temporary Login
If forget user name and password and make login failure, can use temporary login.
Steps:

User Manual
6/57
a) Error login again, note [Errcode],
b) Contact with customer service, they will tell a temporary user name and password.
3.2 Menu Operation
Menu Operation is functions at [Right Click Menu] and [Main Menu],in order to make operation
more easily.
Menu function as follows:
Right Click Menu: System Setup, View Layout , Video Adjust, PTZ, Clients, Snapshot, Photos,
Record Setup, Playback, Clear Alarm
Main Menu: ：System Setup, View Layout(3 layout), Sequence Interval, Zoom, Video Adjust, PTZ,
Snapshot, Photos, Record Setup, Playback, Shutdown.

User Manual
7/57
3.2.1 View Layout
Function Location: Right Click Menu:
Main Menu:
Function Summary: while previewing, it can adjust screen distribution mode, can choose View1,
View2 (Picture in Picture), View4, etc.
Function Introduction:
3.2.2 Sequence Interval
Function Location: Main Menu:
Function Summary: [Sequence interval] can show the previewing screen in turns, after finishing
Sequence Interval, the screen layout will be the same with that before this function.
Steps:
1. Single click at main menu to start Sequence Interval function ;
2. Setup how time interval ;
3. Single click [OK], then start ‘Sequence Interval’
4. Single click button, can stop Sequence interval function.
5.
Mode
Screen
No.
Picture Changes Display Order Full Screen Remark
1View 1 Select ‘Channel No.’ 1，2，3…16 / /
2View
（Picture in
Picture）
2
Click ‘Picture in
Picture’
1+2，3+4…
13+14，15+16
Double click
Press on the small
picture for a little long
time , then can drag the
picture
4View 4 Click ‘View4’
1～4，5～8，
9～12，13～16
Double click /

User Manual
8/57
3.2.3 Video Adjust
Main Menu:
Function Summary: can setup different video effects during different time range.
For Example: Session1 can setup as Day effect, Session2 setup as Night effect.
3.2.3.1 Session1
Steps:
1. From Right Click Menu or Main Menu, Single click video Adjust Icon;
2. Select channel need adjusting ;
3. Mode select [Session 1], setup the effective time range;
Remarks: Session 1 default as the whole day
4. Manually Adjust [Contrast, Chroma, Hue, Sharpness] ;
Remarks: Also can single click [Standard, Soft, Bright] for speedy settings.
5. Single Click [Save] to take effect.
Remarks: [Copy] can copy this setup to all channels.
3.2.3.2 Session 2
Steps:

User Manual
9/57
Setup steps of Session2 is the same with Session1.
Remarks: change Session2 valid time range into Night (for example 17:30～06:00), it will be
night mode.
3.2.4 PTZ
Main Menu:
Function Summary:
1. [PTZ Adjust] can adjust PTZ lens direction, Iris, Focus, Zoom, Speed.
2. [Preset positions Cruise] can adjust Preset Positions, Cruise Line, Aux.
3.2..4.1 PTZ Adjust
PTZ Adjust Steps:
1. Right Click Menu or Main Menu select [PTZ Control];
2. Change Channel No. into PTZ Channel;
Remarks: After selecting, it will be full screen showing; single click [16 View] can get
multi-screen;
3. Change PTZ moving speed;
4. Single click up/down/right/left button to adjust PTZ lens direction;
Remarket: [Auto] can make PTZ Horizontal roll.
5. Single click [Iris/Focus/Zoom] can adjust brightness, focus, and image resizing.
Single Click [More] enter ‘3.4.5.2 Preset point Cruise’
3.2.4.2 Preset Point Cruise
Include Aux function, Preset, Patrol.
3.2.4.3 Aux Function

User Manual
10/57
1. Choose ‘AUX’ function No;
2. Single click [AUX OPEN] can open corresponding function, for example wiper;
3. Single click [AUX CLOSE] can close the function.
3.2.4.4 Preset
1. Choose ‘Preset No.’ , for example :1;
2. Single click [Goto] can invoke the preset point.
3.2.4.5 Patrol
1. Single click [Patrol] , PTZ enter cruising condition;
2. Single click [Stop] , PTZ stop cruising.
3.2.5 Clients
Function Summary:
1. Count client-end numbers that connecting with the DVR;
2. Disconnect any connection, or disconnect all connections.

User Manual
11/57
All client-end connection information: channel, IP, Port, and Connections all information can check
here.
Disconnect Steps:
1. From the list, select any channel to connect;
2. Single click [Disconnect] , can disconnect the remote connection;
3. Single click [Disconnect All], can disconnect all remote connection.
3.2.6 Snapshot
Snapshot function includes [Snapshot], [Photos] two functions.
3.2.6.1 Snapshot
Main Menu:
Function Summary: ：can make snapshot of object image and store into the HDD.
Steps:
1. Right click Right Click Menu or Main Menu [Snapshot];
Remarks: enter snapshot condition; the mouse icon will change into camera icon.
2. Move into snapshot screen, single left click can get the snapshot, check the picture for

User Manual
12/57
prompt;
3. Right click can cancel snapshot condition.
3.2.6.2 Photos
Main Menu:
Function Summary：
1. Can query the snapshot stored in the DVR, include Manual Snapshot, Alarm Snapshot, Record
Snapshot.
2. Can copy the snapshot into USB disk.
3.2.6.3 Snapshot Query
Steps：
1. [Search Type] choose snapshot type, default is All Picture;
2. [Channel] choose the channel for snapshot, default is All channels;
3. [Start] ~[End] is snapshot time range (Longest is 1 month), default is ‘today’ ;
4. [Search] button, single click, then the right list can show the eligible snapshot.
Remarks: single click can show the snapshot contents.

User Manual
13/57
3.2.6.4 Picture Backup
Steps:
1. Connect FAT32 format U disk into the DVR USB port;
2. Single click to choose a picture and it can only choose one;
3. Single click [Backup to USB], after the prompt shown backup successfully can take away
the U disk.
3.2.7. Record Function
Record function includes:
1. Record Setup: open/close Manual Record (default is open ), open/close
Scheduled Record;
2. Playback: Query, Playback, Backup.
3.2.7.1 Record Setup
Main Menu:
Function Summary:
1. Can open/close each channel Manual Record;
2. Can open/close each channel Scheduled Record?
3.2.7.2 Manual Record

User Manual
14/57
Step I: Open Manual Record
1. Right Click Menu or Main Menu .Select [Record Setup];
2. Select channel, and choose ‘Manual’ option;
Remarks: [Copy] can make the settings apply to all channels
3. Single click [OK] to open Manual Record ;
Remarks: Recording channel has the icon: , Manual Record default is open .
Steps II: Close Manual Record
1. Choose the channel, cancel ‘Manual’ Option;
Remarks: [Copy] can apply the settings to all channels.
2. Single click [OK] TO CLOSE Manual Record function.
3.2.7.3 Scheduled Record
Step I: Open and Setup Scheduled Record
1. Right Click Menu or Main Menu. Select [Record Setup];
2. Select channel, and choose ‘Scheduled’ option;
Remarks: [Copy] can make the settings apply to all channels
3. Single click [Set] to modify Scheduled Record time range;
Remarks: Scheduled Record can be divided into 2 time ranges.
4. Single click [OK] to OPEN Scheduled Record
Remarks: channel has the icon: .
3.2.7.4 Playback

User Manual
15/57
Main Menu:
Function Summary:
1. It can query, playback record file of any channel;
2. It can backup file into U disk.
3.2.7.4.1 Query Playback
Operation Steps:
1. Right Click Menu or Main Menu[Playback] ;
2. Modify playback starting date and time
Remark: Also can click to choose playback position, double click open minute view as
follows, double click again back to hour view.
3. Choose video type: Scheduled/ Manual/ Alarm/ Motion Detection ;
4. Choose playback channel , can multi-select or all select;
5. Single click [Play] button, can display the video.

User Manual
16/57
3.2.7.4.2 Playback Adjusting
When playback, users can adjust the speed and progress.
Serial
No.
Name Description
Seri
al
No.
Name Description

User Manual
17/57
1
Playback
time
Current playback time 9
Fast
Backwa
rd
Fast backward display, single click
to switch X8/X16
2
Progress
Bar
Progress of the current
playback file in 1 hour
10
Snapsh
ot
Snapshot for object screen
3 Sound Open/close sound playback 11 Pause Pause display
4
Conditio
n
Playback Condition 12 Display
Display the video
5 Window Choose the operation window 13
Fast
Display
Accelerate display , single click to
switch X2/X4/X8/X16
6
Shutdow
n
Exit the playback 14
Slow
Display
Decelerate display, single click to
switch X1/2 X1/4 X1/8 X1/16
7
A Hour
Ago
Choose the window and
playback the video a hour ago
15
Single
Frame
Each single click can go ahead
1frame
8
Backwar
d
Each single click chosen
widow ,it will back up 2S
16
Next a
Hour
Choose the window and display the
video next hour
3.2.7.5 Backup
It can backup the record file into U disk.
Operation Steps:
1. Single click [Backup] , open the backup interface;

User Manual
18/57
2. Modify the backup start time;
3. Modify the backup time range;
4. Choose Record Type, Scheduled/ Manual/Alarm/ Motion detection record;
5. Choose backup channel;
6. Single click [Backup] to backup the file selected into U disk;
7. Install the display plug-in, then can use Media Player to display the backup file.
3.2.8Clear Alarm
Function Summary: can clear some channel or all channel Alarm effect.
Operation Steps:
1. Right click alarming channel, choose [Clear Alarm/ Current] can clear alarming of
current channel;
2. Right click all channels, choose [Clear Alarm/ Clear All] can clear alarming of all
channels.
3.2.9Shutdown
Function Location: Main Menu:
Function Summary: can Logout, Shutdown and Restart.
4 System Setup

User Manual
19/57
4.1 Functional Structure
Category Group Function Point
General
General
Language, NTSC/PAL, Transparency, VGA Resolution, Wizard, Speedy
Function
Time Date, Time, Auto Synchronize Time, Time zone Setting
User Local user, Network User, Automatic Logout
Channel
Preview Ch Name, OSD Position, Hide Video, Privacy Mask
Stream Main Stream, Minor Stream
Audio Audio Compress, Audio Monitoring, Bind with Video
Network
Setting Dialing Setting, IP Setting
Service WebCC, Bi-directional Talk
Alarm
Motion
Detection
Motion Detection Alarm Setup, Alarm Output
No Video Video Loss Alarm Setup, Alarm Output
Alarm Device Alarm Device Alarm Input Setup, Alarm Output
Alarm Task
Motion Detection, No Video, Alarm Device, Start Time/ End Time Setting of
Alarm input
E-mail Alarming E-mail Server, Sender Setting, Receiver Setting
System
Log Log Query, Backup
Maintenance Reboot Setup, Update, Reset Factory, Import Setting, Export Setting
Information
Product Model, Serial Number, Software Version, Hardware Version
Software Release Time
Device
Storage Storage device condition, Format
PTZ PTZ Setting, Preset, Patrol
Other Device Width of Monitor, Height of Monitor, Device ID, Main Display Device
4.2 General
Functions:
General: for example: Language, NTSC/PAL, Transparency, VGA Resolution, Display
Device ID, Wizard, etc.;
Time: for example date format, Set Date/Set Time, Auto Synchronize Time, Time zone
setting;
User: Local User, Network User Add/Delete/ Edit.
4.2.1.1 NTSC/PAL
Function Location: General—General—NTSC/PAL
Function Summary: change the current video standard, supports standard PAL/NTSC.
Remark: It takes effect after restarting.

User Manual
20/57
4.2.1.2 VGA Resolution
Function Location: General/General/VGA Resolution
Function Summary: Modify resolution of the DVR output to display.
Remarks: After modifying the resolution, if not confirm in 10 seconds, it will automatically cancel in
order to avoid problem of display doesn’t support large resolution
4.2.1.3 Wizard
Function Location: General/General/Wizard
Function Summary: choose this function, while starting the DVR, it will display as startup
Remarks: click Wizard button can enter wizard screen at any time.
4.2.1.4 Function Demo
Function Location: General/General/Function Demo
Function Summary: display as a demo, guide the user to make speedy setup
4.2.2 Time
Function Location: General/Time
Function Summary: Setup system time, for example Set date, Set Time, Timezone Setting, Auto

User Manual
21/57
Synchronize Time, etc.
4.2.3 User
4.2.3.1 Local User
Function Location: General/ User/ Local User
Function Summary:
1. It allows local users login the DVR and make allowed operation;
2. It allows add/edit/delete local users.

User Manual
22/57
4.2.3.1.1 Automatic Logout
Function Location: General/ User/ Automatic Logout
Function Summary:
1. As User operation upto the duration set, it will automatically logout (1-99 mins);
2. Users need to login again to continue the operation t, this function in order to improve
the safety.
4.2.3.2 Network User
Function Location: General/ User/ Network User
Function Summary: while remote monitoring, this setting will be as the user name and password in
client-end.

User Manual
23/57
4.3 Channel
Function：1.Preview setting：Channel name, OSD position, Hide video, Privacy mark；
2.Code stream setting：Main code stream image size and code rate; minor code stream
image size, kbps, fluency 3.Audio setting：Audio compression, Audio
monitoring
4.3.1 Preview setting
4.3.1.1 Preview adjustment
Function position：Channel| Preview setting
Function introduction: 1.Modify channel name；
2. Modify OSD position
3. Hide video

User Manual
24/57
4.3.1.1.1 Modify channel name
4.3.1.1.2 Modify OSD position

User Manual
25/57
4.3.1.1.3 Hide video
Steps：
1. Left lick the box after “Hide Video”
Click【Apply】or【ok】,then preview the selected channel, that has been hided。
4.3.1.1.4 Analog Port
Steps：

User Manual
26/57
1. Left lick the box after“Analog port”；
Click【Sort chn】Preview the channel 1,that show “Sort chn 1”,then drag the channel to sort
4.3.1.2 Privacy mask
Function position: Channel| Preview setting| Privacy mark
Function introduction： Hide the part of channel, max 4 privacy mark.
Step 1： Open privacy market, and start this function

User Manual
27/57
1. Click 【Privacy mark】；
2. Choose“Enable”；
Note：【Copy】,other channels can have same setting。
3. Click【setting】
Step 2：Setting part of privacy mask
Step 3：Ok; Apply
1. Click【ok】，then【Apply】or【ok】。

User Manual
28/57
4.3.2 Stream setting
Function position：Channel| Stream setting
Function introduction： 1.Main stream setting—stream for local record；
2. Minor stream setting—stream for network transmission
4.3.2.1 Main stream
Function position：Channel| stream| Main stream
Function：Main stream： stream for local record；Resolution can choose No/D1/CIF,kbps can be
adjusted。

User Manual
29/57
Name Choice Introduction
Resolution D1/CIF
D1： PAL video standard—image resolution 704*576；
NTSC video standard，image resolution 640*480。
CIF：PAL video standard—image resolution 352*288；
kbps
D1(600kbps)
CIF(400kbps)
The more the number, the higher the image quality, the
larger HDD it will take
Steps：
1. Modify” Resolution”：NO/CIF/D1；
2. Modify“Kbps”；
Note：【Copy】,other channels can have same setting
3. Click【Apply】or【ok】
Note: Please take compression frame rate in parameter form for reference to setting local
Compression frame rate
4.3.2.2 Minor stream
Function position：Channel| stream| Minor stream
Function introduction：Minor stream： stream for network transmission；resolution choice
No/QCIF/CIF，kbps can be adjusted，fluency choice High/Middle/low

User Manual
30/57
Name Choice Instruction
Resolu
tion
No/QCIF/CI
F
No：Close minor code stream，and make net work transmission by main
stream
QCIF：PAL video standard—image resolution 176*144；
CIF：PAL video standard—image resolution 352*288；
(kbps)
Close
QCIF(200kb
ps)
CIF(200kbp
s)
The more kbps, the higher image quality, the more network source that
will be took up
Fluenc
y
High/Middl
e/low
The more fluency, the higher image quality, the more network source
that will be took up
Please take compression frame rate in parameter form for reference
Note：Default fluency “low”，support 14 D1 playback
Fluency “Close”， support 16 D1 playback
Fluency “High”， support only 12 D1 playback
Steps：
1. Modify“Resolution”No/QCIF/CIF；
2. Modify“kbps”；
3. Modify” Fluency” High/Middle/low
4.3.3 Audio setting
Function position：Channel| Audio setting
Function introduction： 1.Audio monitoring：Hear channel sound locally
2.Audio compression：Audio/video record, network monitoring. Remote view.

User Manual
31/57
4.3.3.1 Audio compression
Function position：Channel| Audio| Audio compression
Function introduction： 1.Chooose“Audio compression”, will record both sound and video
2. Choose “Audio compression” Network monitoring and remote record will be audio
and video
Step：
1. Choose” Audio compress”, “open”；
3. local record, network monitoring and remote record will be audio and video
4.3.3.2 Audio monitoring
Function position：Channel| Audio| Audio monitoring
Function introduction： 1.Choose“Audio monitoring”, support local audio；
2. Audio volume can be adjusted

User Manual
32/57
Steps：
1.Choose“Audio monitoring”, “open”；
2.Click【Apply】or【ok】,connect audio out, can hear sound
3. Audio volume can be adjusted。
4.3.3.3 Bind with video
Function position：Channel| Audio| Bind with video
Function introduction： 1.Choose“Bind with video”，when see video, can hear the bind
audio
2.Audio volume can be adjusted

User Manual
33/57
Steps：
1. Choose” Bind with video”, then choose“CH01”；
Click【Apply】or【ok】when see channel 1 video, can hear the bind audio accordingly.
4.4 Network
Function：1.Network setting：Choose ADSL dial-up, wireless dial-up, DHCP gets IP automatically
in LAN, Manual setting IP in LAN.
2. Network service: WebCC, Bi-directional talk function
4.4.1 Network setting
Function：Network| network setting
Function introduction： 1.Dial-up setting；
2. DHCP gets IP automatically，Manual setting IP；
4.4.1.1 Dial-up
ADSL dial-up，or 3G card dial-up。
4.4.1.2 ADSL dial-up
Function position：Network| Network setting| PPPoE
Function introduction： ADSL dial-up；

User Manual
34/57
Step 1：ADSL dial-up
2. Write ADSL dial-up account name and password；
3. Click【connect】
Note: After successful dial-up, it can dial-up automatically after restart DVR or outage.
Step 2：Disconnect ADSL dial-up
1. Click【disconnect】
4.4.1.3 3G card dial-up
Function position：Network| Network setting|PPPoE
Function introduction： 3G card dial-up
Step 1：3G card dial-up
2. Write card number/account/password
Please take 5.2 3G card dial-up for reference for number/account/password setting
4. Click【connect】
Note: After successful dial-up, it can dial-up automatically after restart DVR or outage.
Step 2：Disconnect 3G network card dial-up
1. Click【disconnected】。
4.4.1.4 DHCP gets IP automatically
Function position：Network| network setting
Function introduction：DHCP gets IP automatically in LAN
Open DHCP steps：
1. Confirm route to open DHCP, that can be used normally
2. Choose” Automatic IP（DHCP）”；
3. Click【Apply】or【ok】 It can get IP automatically
Note: when using DHCP function, it can not make manual IP etc parameters setting
4.4.1.5 Manual setting IP
Function position：Network| network setting
Function introduction：Manual setting IP in LAN.
Manual setting steps：
1. Cancel” Automatic IP（DHCP）”function；
2. Manual writing IP/ NetMask / Gateway/DNS
4.4.2 Network service
Function position：Network| network service
Function introduction： 1. Realize web monitoring by WebCC

User Manual
35/57
2. Realize Bi-directional talk between local and remote monitoring
4.4.2.1 WebCC
Function position：Network|Network service|WebCC
Function introduction： Realize web monitoring by WebCC; Connect with DVR by device IP
Step 1：Open WebCC function
1. Choose“WebCC”；
If 80 port has been took up, pls Modify port number。
2. Click【Apply】or【ok】to save setting
Step 2： Client-end use Webccc to connect with DVR
1. The users open IE browser, and write DVR IP and port number
Note: IE setting: Tool/internet choice/Safe/Internet/ customization, open ActiveX plug-in
4.4.2.2 Bi-directional talk

User Manual
36/57
Function position：Network|Network service| Bi-directional talk
Function introduction：Realize Bi-directional talk between local and remote monitoring
Step 1：Open Bi-directional talk
1. Choose“Bi-directional talk”；
2. choose“channel”,example“CH04”；
Step 2：Client-end open bi-directional talk
1. Client-end connect with DVR
2. Right click the linking window, choose Bi-directional talk
Note: Click in WebCC, and can do Bi-directional talk
4.5 Alarm
Function position：System setup| Alarm
Function introduction： 1. Open motion detection alarm, and set alarm out
2. Open No video alarm, and set alarm out
3. Open alarm device, and set alarm out
4. Set Alarm task
5. Set E-mail alert
6. Set Alarm pre-record
4.5.1 Motion detection
Function position：System setup| Alarm| Motion detection

User Manual
37/57
Function introduction： When there is a move object, it can alarm and send alarm-out
Step 1： Choose channel, open motion detection
1. Choose” Enable”；

User Manual
38/57
Step 2： Set motion detection part
1. Left click image as starting
2. Left click and move mouse at the same time to choose motion detection part
3. Release left click to finish setting
Note: It only can make motion detection in selected part.
4. Repeat 1—3,and the Max motion detection parts are 4
5. Click【ok】,save setting
Step 3： Adjust sensibility of motion detection
1. Left click can adjust “Sensibility”
Note: The more number, the more sensible, the much easier to detect the move object
Step 4：Choose Alarm out
1. Click Alarm output【setting】
2. Setting parameters：
◆Keep Alarm:1-999s available
◆Turn on the Buzzer: DVR will send out buzzer alarm
◆Send to Client: It will send alarm to Client-end
◇Video channel: the Client-end connect with this channel
◆E-mail alert: It will send emails to collection box
◇Send picture in attachment
◆Start record: It will record the selected channels
◆Call preset: It will adjust selected preset of PTZ channel
◆Snapshot: It will snapshot the selected channel and save images.

User Manual
39/57
◆Output Module: It will open alarm for the relative device (normal close)
3. Click【ok】,save setting
Step 5：Detect alarm setting
1. Touch selected channel motion detection, and it can send out alarm alert
2. Selected alarm out parameter setting work normally
3. Top menu will popup alarm coin, and record log at same time
4.5.2 No video
Function position：System setup| Alarm| No video
Function introduction： When detect no video, it will send alarm alert
Step 1： Choose channel, and open no video detection
1. Choose” Enable”；
2. Click【set】
Step 2：Setting parameter

User Manual
40/57
1.Setting parameters：
2.Click【ok】,save setting
Step 3：Detect Alarm setting
1. Disconnected with the selected channel
4.5.3 Alarm device
Function position：System setup| Alarm| Alarm device
Function introduction：When touch alarm device, it will send alarm out.
Step 1：Choose “Alarm output”

User Manual
41/57
1. Choose “Addr”
Note: Please choose the relative addr of alarm device
2. Choose “BR” type
Note: Please write the relative BR of alarm device
Step 2：Setting alarm output parameter 1
Choose “addr”
Note: Please choose the relative addr of alarm device
Click【set】

User Manual
42/57
Step 3：Setting alarm output parameter 2
1. Click【set】
2. Setting Alarm output parameters：
2.Click【ok】,save setting
Step 4：Detect Alarm device
1. Touch alarm device

User Manual
43/57
4.5.4 Alarm task
Function position：System setup| Alarm| Alarm task
Function introduction：It only send alarm output in preset time
Steps：
1. Choose” Alarm types”；”Motion detect/no video/Alarm Device” are available
2. Choose” Enable”
3. Modify” Start time”,” End time”；
Note: It only send alarm output in preset time.
4. Click【Apply】or【ok】,save setting
4.5.5 E-mail alert
Function position：System setup| Alarm| E-mail
Function introduction: setting email alert parameters: sender setting, receiver setting, Interval etc
Step 1：Sender setting

User Manual
44/57
1. Choose“SMTP”；
Note: can manual writing or choose exist email server
2. Write user name and password
3. Modify” Interval”（1～99Min）；
4. Click【Apply】,save setting
Step 2：Receiver setting
1. Write email address in “Receiver Site”
2. Click【Add】，then can add new receiver into list
3. Click【Apply】or【ok】,save setting
Step 3：Mail Testing
1. Click【Mail Testing】；
2. Detect the emails in collection box
4.6 System
Function position：System setup| System
Function introduction： 1.Log：Search, DVR log backup；Log:
2. Maintenance: Reboot setup, software update, import/export setting
3.Informatoin： Search DVR hardware/software information
4.6.1 Log:
Function position：System| Log
Function introduction： 1. Search DVR operation log
2. Save the eligible logs into U disk

User Manual
45/57
4.6.1.1 Log query
Step: Query this DVR’s log
1. Select log type, eg system operation, login, etc.
2. Change query time
Note: Don’t select above “Time”, it will query all logs.
3. Click and select log, Single-click” Detail” to read more information.
4.6.1.2 Log backup
Step: Backup log into U-disk.
1. Insert FAT32 format U-Disk
2. Query qualified log.
3. Click “Backup” button to backup the log into U-Disk.
4.6.2 Maintenance
Function:
1. Time reboot: This DVR can be set reboot.
2. Software update: U-Disk, FTP server or website can be selected for update.
3. Import/Export setting: Export this DVR’s setting into U-Disk. Import U-Disk’ setting into this
DVR.
4.6.2.1 Time Reboot
Location:System Setup|Maintenance|Reboot
Function: The reboot function is used to prevent from overmuch file fragments. There will be lots of
file fragments at DVR system when it is in long-time running.

User Manual
46/57
Step: Enable Time Reboot function
1. Select reboot date at”Reboot Setup”. It takes week as standard.
2. Set reboot time,eg,23:00.
3. Click“Apply”or “OK”to save setting.
4.6.2.2 Software update
Location:System Setup|Mantenace|UPdate
Function: The software can be updated through USB, FTP or online update.
Note: When it is updated, the electric power can not be powered off , otherwise it will
make the DVR unable to work..
4.6.2.2.1 USB update
Step:
1. Put updated files at FAT32 format U-Disk. These two files should be placed at
root directory at U-Disk. Then insert the U-Disk into DVR’s USB port.
2. Select USB at “Update type”.
3. Click “Update” button to finish this work.
Note: After update is finished, it will automatically reboot the DVR. When the DVR
is started, it is the latest version.

User Manual
47/57
4.6.2.2.2 FTP update
Step:
1. Place updated file at root directory at FTP server.
2. Select FTP at “Update type”.
3. Modify “Server”address into FTP server’s IP address.
4. Click “Update”button to finish this work.
Note: After update is finished, it will automatically reboot the DVR. When the
DVR is started, it shall be the latest version.
4.6.2.3 HTTP online update

User Manual
48/57
Step:1. Make sure the DVR is connected with internet.
2. Select” HTTP” at” Update type”.
3. Select update server at “Server”.
4. Click “Update” button to finish this work
Note: After update is finished, it will automatically reboot the DVR. When the DVR is started,
it shall be the latest version.
4.6.2.3 Reset factory
Location: System Setup |Maintenance| Reset factory
Function: All setting at this DVR can be restore factory setting.
Step: 1. Click “Reset Factory”.
2. Click”Ok” at confirmation interface to reboot the DVR and then all original factory
settings are restored.
4.6.2.4 Setting import/export
Location: Location: System Setup| Maintenance| export/import Setting
Function: 1.Export DVR’s setting to U-Disk for backup.
2. Import the same setting from U-Disk to this DVR.

User Manual
49/57
Step of Exporting:
1. Insert U-Disk with FAT32 format into DVR
2. .Click export setting
Step of Importing:
1. Insert U-Disk with FAT32 format into DVR and there are the settings of same
model DVR at U-Disk.
2. Click” Import setting” button to import the setting from U-Disk to this DVR.
Note: The imported setting will be valid after the DVR is rebooting.
4.6.3 Information:
Location: System Setup|Maintenance|Information
Function: It can be used to query this DVR’s serial number, software version’s information or
hardware version’s information.

User Manual
50/57
4.7 Device
4.7.1 Storage
Location: Device|Storage
Function: 1.Query the inserted magnetic disk or hard disk’s working mode.
2.Formate inserted hard disk or U-Disk.
4.7.1.1 Hard disk(Hdisk is named in interface) working mode

User Manual
51/57
When it is“Hdisk is full”, please select “Overlay”or “Stop Recording”.
Explaination of Hard disk working model
Working
mode
explaination
Overlay When capacity is not enough, delete earlier video files.
Stop
recordin
g
The reserved capacity can be set. When it is not enough,
the video recording will be stopped.
4.7.1.2 Format
Step:
1. Click and select magnetic disk in the list.
2. Click “Format”.
3. Click”OK”at confirmation interface.
4. The formatted magnetic disk can be used for storage or backup.
4.7.2 PTZ
4.7.2.1 PTZ adjustment
Step 1:
1. Click “Seting” at each channel to open the setting interface.
2. Input PTZ’s address, protocol and BP.

User Manual
52/57
3. Click “OK”to save above setting.
Step2: PTZ control interchange
4.7.2.2 Presetting point
Step1:Open presetting interface.
1. Select PTZ channel.
2. Click”Setting” |”Preset” to open presetting interface.
Step 2:Add presetting point

User Manual
53/57
1. Click PTZ direction button and select visual angle.
2. Input new preset series number at “Preset”.
3. Click “Add” to add new preset point into the list.
Note:Click existing preset point in the list. Click“Delete” to delete selected
point.
Step3:Call preset point(Menu function)
1. righ-click menu or main menu to open “PTZ control” |”More”.
2. Select preset point from preset point list.
3. Click”Goto”to make PZT visual angle turn to this point location.
4.7.2.3 Patrol
Step 1: Open patrol setting interface.

User Manual
54/57
1. Select PTZ channel
2. Click”Set” |”Patrol” to open patrol interface.
Step 2: Add preset point into patrol
1. Select preset point from preset point list.
Adjust detention time at this preset point
2. Click”Add” to add this preset point into patrol.
3. Note:Click existing preset point in the list. Click“Delete” to delete selected point.
4. Click”Save”to save above setting.
Step 3:Call patrol to cruise
4.7.3 Other devices

User Manual
55/57
4.7.3.1 Monitor’s width and height
Location:Other Device| video ouput
Function: Width or height of output image can be adjusted on monitor
4.7.3.2 Device ID
Location ：Device |Other Device|Device ID
Function：This DVR’s device ID can be modified at range of 1～255. When the ID is matched with
controller, the controller can control this DVR one to one.

User Manual
56/57
Step of match device ID
1. Modify this DVR’S device ID.
2. Match device ID: Press following keys on controller gradually: 【DEV】+
【5】+【OK】.
Note: At the time, the controller can only be used to control this DVR and
it is invalid to others.
5 Cancel match ID: Press following keys on controller gradually: DEV】+【5】+【ESC】to cancel the
matched ID.
5.5.1.1 Main disply device
Location: Device|Other Device| Main disply device
Function: The DVR can only be adjusted at the selected display device while other device can be
used for monitoring.
Step:
1. Select main monitor type:
2. Click ”Apply”or”OK”to change output display device.
3. Confirm this operation at new display device in 15 seconds, or it will still
use previous device.
Note: Press “F1”button at front panel to change output display device
too.
6.Appendices

User Manual
57/57
5.6 Calculate hard disk capacity
Code rate Video file capacity /hour
Min 113kbps 51MB
Default 600kbps 270MB
Max 1365kbps 614MB
5.6.1 Hard disk capacity convert
capacity convert at this DVR
capacity convert at operational
system
B 1 B ＝ 8 b B 1 B ＝ 8 b
MB 1 MB ＝ 1000 KB MB 1 MB ＝ 1024 KB
GB 1 GB ＝ 1000 MB GB 1 GB ＝ 1024 MB
TB 1 TB ＝ 1000 GB TB 1 TB ＝ 1024 GB
Note: On capacity convert at this DVR, hard disk manufacturer must be the same one and both
adopt 1GB＝1000MB mode. It is not 1GB＝1024MB mode which is used on operational system.
5.6.2 Required capacity for video recording.
1. The video file for one channel’s image at each hour.
A＝B÷8÷1000×3600
2. The video file for N channels’ image at each day.
A＝B÷8÷1000×3600×24×N
3. Video file for N channels’ image for D days
A＝B÷8÷1000×3600×24×D×N
Note: A indicates the required hard disk capacity. N indicates channel’s quantity. D indicates days
for video recording.
5.2 3G Network card dial-up
Numbe
r
User
name
password
Unic
om
*99#
Tele
com
#777 card card
<The End>

Dvr user manual

More Related Content

What's hot (15)

Viewers also liked (11)

Similar to Dvr user manual (20)

Recently uploaded (20)

Dvr user manual