E-Passport Using RFID Tag and Finger Print Sensor

International Journal of Scientific Research and Engineering Development-– Volume 2 Issue 5, Sep – Oct 2019
Available at www.ijsred.com
ISSN : 2581-7175 ©IJSRED: All Rights are Reserved Page 776
E-Passport Using RFID Tag and Fingerprint Sensor
Shubham Kailas khairnar, Prasad Prakash Bhamare, Abhishek Sharad Hire,
Junaid Moinuddin Khan
Department of Computer Engineering, Late G.N. Sapkal College of Engineering, University of Pune, Nashik, India.
----------------------------------------************************----------------------------------
I. Abstract:
Advancements in technology have created the chance of larger assurance of correct travel document
possession, however, some issues relating to security and effectiveness stay unaddressed. Electronic
passports have notable a good and quick readying all around the world since the International Civil
Aviation Organization the globe have adopted standards whereby passports will store biometric identifiers.
The employment of life science for identification has the potential to create the lives easier, and therefore
the world folks board a safer place. The aim of biometric with RFID Tag suggests that e-passports are to
stop the misappropriated entry of a person into a selected country and limit the employment of counterfeit
documents by a lot of correct identification of a person. This paper analyses the fingerprint biometric e-
passport style. These papers concentrate on the privacy and private security of bearers of e-passports, the
particular security profit countries obtained by the introduction of e-passports victimization fingerprint
recognition systems. The research worker analysed its main crypto graphical features; the fingerprint life
science presently used with e-passports and regarded the encompassing procedures. Research worker-
centered on vulnerabilities since anyone willing to bypass the system would select a constant approach. On
the contrary, only wishing on them could create a risk that didn't exist with previous passports and border
controls. The paper conjointly provides a security analysis of the e-passport victimization fingerprint
biometric with RFID tags that are supposed to produce improved security in protective biometric info of
the e-passport bearer.
Keywords — RFID reader, RFID tag, Microcontroller, Arduino UNO, Fingerprint, E-passport.
----------------------------------------************************----------------------------------
II. INTRODUCTION
An E-Passport is an ID document that possesses connected biometric data of its bearer. It’s embedded in
the RFID tag that is accomplished by crypto graphical practicality. The triple-crown implementation of
biometric techniques in documents like E-Passports aims to the strength of border security by decreasing
the chance of the document's holder.
The e-passport additionally offers substantial edges to the rightful holder by providing a lot of refined
suggests that of confirming that the passport belongs thereto person which it's authentic, while not privacy.
The states square measure presently supplying e-Passports, which corresponds to quite five-hundredths of
all passports being issued worldwide. This represents an excellent sweetening in national and international
RESEARCH ARTICLE OPEN ACCESS

security because it improves the integrity of passports by the one written within the document and to the
physical characteristics of the holders, and permits machine-assisted verification of biometric and account
data to verify the identity of travellers.
III. RELATED WORK
Problem Statement:
Physical passport verification is time intense and error-prone. This project eliminates forgery and time
wastage in confirming passports. RFID tags and fingerprint scanner stores a singular code with a special
coding that's wont to access the user knowledge hold on the info.
Literature survey:
An E-Passport holder holds an electronic chip like RFIDs and fingerprints. The chip holds similar
information that's written on the passport info page like the passport holder's name and different info. An
E-Passport holds a biometric authentication. The United States wants that the chip ought to contain a
digital photograph of the passport owner. All E-passport issued by Visa discharge Program countries and
also u. s. have safety features to stop the unauthorized analysis or "scanning" of knowledge keep on the E-
passport chip.
This RFID and biometry technologies were projected in the paper "The study of recent technologies
utilized in the E-passport system". Personal credentials and bearers biometric information is kept on RFID
chip that is employed in a verification method by border security officers. consecutive generation of e-
passports can implement additional advanced science mechanism, conjointly referred to as Extended
Access management, and especially a protocol cited as Chop Authentication that protects an e-passport
can implement additional advanced science mechanism, conjointly referred to as Extended Access
management, and especially a protocol cited as Chip Authentication that protects an e-passport against
biological research and exchangeability attacks. The Extended Access management Suite of Protocols has
found minor attention within the literature as yet.
OBJECTIVE:
1. To analyse and verify the benefits of e-passport.
2. To build a recommendation on improvement on the
present used a passport.
3. To style, associate degrees construct an RFID and
biometric passport system example.
IV. METHODOLOGY
RFID Technology:
Radio Frequency Identification (RFID) is an automatic identification method whose concept is based on
retrieving data from radio waves embedded onto a label-style material using devices called RFID tags or
transponders, Readers, and antennas. The RFID technology is used in many different Identification
systems in the form of barcodes and embedded chips. The RFID tag is a small microchip designed for

wireless data transmission. It contains the same information as a passport's data page—the passport
holder's name, nationality, gender, date of birth, place of birth and digitized photo. RFID tags can be one
of two types: active or passive. Active tags are those which are run by battery, while passive does not have
batteries. So they supply their power by using the power obtained from radio signals emitted by the RFID
readers to operate. To read the information on the chip, the RFID reader energizes the chip circuitry by
wirelessly emanating power and communicating through its antenna which is usually built into the RFID
Reader and the RFID Tag to improve the signal. The designed-in operation vary of the chip electronic
equipment is incredibly small; it should be command among ten centimetres of the reader.
Fingerprint Identification:
A fingerprint in its slender sense is a control left by the friction ridges of a personality's finger. In a wider
use of the term, fingerprints are the traces of control from the friction ridges of any a part of a personality's
or different primate hand. A print from the foot may leave control of friction ridges. A friction ridge could
be a raised portion of the cuticle on the digits (fingers and toes), the palm or the only of the foot,
consisting of one or more connected ridge units of friction ridge skin. These are usually referred to as
"epidermal ridges" that are caused by the underlying interface between the dermal papillae of the derma
and also the interpapillary (rete) pegs of the stratum. These dermal ridges serve to amplify vibrations
triggered, for example, when fingertips brush across Associate in a nursing uneven surface, better
transmitting the signals to sensory nerves involved in fine texture perception. These ridges conjointly
assist in fascinating rough surfaces, as well as smooth wet surfaces.
ARCHITECTURE:
Figure 1.Architecture of the proposed methodology

V. CONCLUSION
The project has analysed the key current and
potential uses of RFID in distinguishing documents.
The vital feature of this project is security and time
wastage concerned invalidation of passports. The
inclusion of RFID technology into computer-
readable documents can improve their lustiness
against fraud.
ACKNOWLEDGMENT
We are very great thankful to our guide Prof.
Jayshree Shinde, project Co-ordinatar Prof.
Prashant kale & H.O.D Dr.(Prof.) Nilesh
Wankhede, Computer Department & Library, Late
G.N. Sapkal College of Engineering for guidance
and advice which helped to improve the present
Paper and for reading the paper and giving
valuable suggestions to improve the paper.
REFERENCES
[1] A.K.Jian, “Biometrics personal identification in networked society”
Technical report 1999.
[2] HOME AFFAIRS JUSTICE (2006), “EU standard specifications for
security features and biometrics in passports and travel documents”,
Technical report, European Union.
[3] ICAO (2006), “Machine-readable travel documents”, Technical
report, ICAO.
[4] KLUGLER, D. (2005), “Advance security mechanisms for machine
readable travel documents, Technical report”, Federal Office for
Information Security (BSI), Germany.
[5] ICAO, “Machine-Readable Travel Documents”, Part 1 Machine
Readable Passports, 5th Edition, 2003
[6] Riscure Security Lab, “E-passport privacy attack”, Cards Asia
Singapore, April 2006.
[7] D. Wagner, “Security and privacy problems in e-passports”,
Cryptology ePrint, Report 2005.
[8] ICAO, “Biometrics Deployment of Machine Readable Travel
Documents”, Version 2.0, May 2004.

E-Passport Using RFID Tag and Finger Print Sensor

More Related Content

What's hot (19)

Similar to E-Passport Using RFID Tag and Finger Print Sensor (20)

More from IJSRED (20)

Recently uploaded (20)

E-Passport Using RFID Tag and Finger Print Sensor