FINGERPRINT BASED LICENSING SYSTEM FOR DRIVING
- 1. FINGERPRINT BASED LICENSING SYSTEM FOR DRIVING
- 2. ABSTRACT: Driving without license is a major issue in many countries. Survey says that the accidents happened mostly by unlicensed drivers. So, a new system is proposed. i.e., FINGER PRINT IDENTIFICATION. Ifthe finger print stored in the controller &finger print swiped in the device matches, he/she can proceed for ignition and otherwise ignition will not work. Moreover the seatbelt detector verifies and then prompts the user to wear the seatbelt before driving
- 3. EXISTING SYSTEM: • Unlicensed driving is a matter of concern for several reasons. • It is possible that drivers who have not undergone appropriate training and testing may be deficient in some aspect of knowledge & skills required to drive safely & efficiently. • To avoid this we proposed a new system.
- 4. FINGERPRINT BASED LICENSING SYSTEM • Fingerprint based car ignition system is a system that is based on biometrics. • The system replaces the existing manual ignition system of a vehicle with the fingerprint recognition of the user.
- 5. WHAT IS BIOMETRICS? A technology of using human body characteristics such as fingerprints, eye retinas and irises, voice patterns, facial patterns and hand measurement for authentication purposes.
- 8. FINGERPRINT SYSTEM • A fingerprint is an impression left by the friction ridges of a human finger • Friction ridge a raised portion of the skin on the fingers.
- 9. FINGRPRINT MODULE SM630 integrated fingerprint verification module Optical fingerprint sensor High performance processor
- 10. SMART CARD • The license issued by the govt. is a smart card which stores different fields such as name, license no., date of expiry, type of license, blocked status as well as fingerprint templates.
- 12. SMART CARD READER • The smart card is inserted into the slot of the reader. • The card reader integrates with it a fingerprint scanner. • This setup increases security by adding “something you are” along with “something you have”. • When a fingerprint impression is received, it is analyzed for its minutiae information and is matched with the template stored in the card to find out if the fingerprints match.
- 14. CONTROLLER The role of the controller is to enable the logic flow.
- 16. FINGERPRINT RECOGNITION • Refers to the automated method of verifying a match between two human fingerprints • Fingerprint matching consists of the comparison of several features of the print pattern, which include: Patterns, which are aggregate characteristics of ridges • Minutia points, which are unique features found within the patterns
- 17. IMAGE-BASED ALGORITHM • compares the basic fingerprint patterns (arch, whorl, and loop) between a previously stored template and a candidate fingerprint • the algorithm finds a central point in the fingerprint image and centers on that • the template contains the type, size, and orientation of patterns within the aligned fingerprint image • the candidate fingerprint image is graphically compared with the template to determine the degree to which they match
- 18. IGNITION CONTROL • comprise of three wires connected to the key system. • when the key is turned first, the two wires are bridged causing current to flow from the car batteries to all parts of the car. • When the key is turned again, the third wire bridges momentarily with the two wires already connected. • This causes the cranking of the engine, which ignites the vehicle. • For these relays are employed.
- 20. CONCLUSION • The proposed system ensures that only authorized person drives the car • It ensures that the seat belt is worn by the driver • Though implementation of the proposed system may take time, it would be of great use for the safety of drivers & irregularities can be kept at check.