IoT.pptx .in this we can see about more details

INTRODUCTION TO INTERNET OF THINGS

 Internet of Things (IoT) comprises things that have unique identities and
are connected to the internet.
 Experts forecast that by the year 2020 there will be a total of 50 billion
devices/ things connected to the internet.
 The scope of IoT is not limited to just connected things(Devices,
appliance, machines) to the Internet.
 Applications on IoT networks extract and create information from lower
level data by filtering, processing , categorizing, condensing and
contextualizing the data.

 Definition
 A dynamic global network infrastructure with self – configuring based on
standard and interoperable communication protocols where physical and
virtual “things” have identified, physical attributes, and virtual personalities
and use intelligent interfaces, often communicate data associated with users
and their environment

 Dynamic and self-Adapting:
◦ Ex: Surveillance cameras can adapt their modes based on whether it is day or
night.
 Self – Configuring:
◦ IoT devices may have self-Configuring capability allowing a large number of
devices to work together to provide certain functionality .
 Interoperable communication protocols:
◦ IoT Devices may support a number of interoperable communication protocols and
can communicate with other devices and also with the infrastructure.

 Unique Identity:
◦ Each IoT devices has a unique identity and a unique identifier. IP address, URI).
 Integrated into information network:
◦ IoT devices are usually integrated into the information network that allows them to
communicate and exchange data with other devices and systems.

 Things of IoT
◦ The “Things” in IoT usually refers to IoT devices which have unique identities and
can perform remote sensing, Actuating and monitoring capabilities.
◦ An IoT device may consist of several interfaces connections to other devices, both
wired and wireless.
◦ These include
◦ I)IoT interfaces for sensors
◦ II) interfaces for internet connectivity
◦ III) memory and storage interfaces
◦ IV) audio video interfaces.

 IoT Protocol :
◦ Link Layer:
 Link Layer protocols determine how the data is physically sent over the
networks physical layer or medium(example copper wire, electrical cable, or
radio wave).
 The Scope of The Link Layer is the Last Local Network connections to
which host is attached.
802.3 Ethernet:
 802.3 is a collections of wired Ethernet standards for the link layer.
 For example 802.3 10BASE5 Ethernet that uses coaxial cable as a shared
medium, 802.3.i is standard for 10 BASET Ethernet over copper twisted pair
connection, Standards provide data rates from 10 Mb/s to 40 gigabits per
second and the higher.

 802.1- WI-FI:
◦ IEEE 802.3 is a collections of wireless Local area network.(WLAN)
communication standards, including extensive descriptions of the link layer.
◦ For example 802.11a operate in the 5 GHz band, 802.11b and 802.11g operate in
the 2.4 GHz band. 802.11ac operates in the 5G hertz band.
 802.16 wiMAX:
◦ IEEE 802.16 is a collection of wireless broadband and Standards, including
extensive descriptions for the link layer also called WiMAX wimax standard
provides a data rates from 1.5 Mb/s to 1Gb/s the recent update provides data rates
of hundred megabits per second for mobile station.

 802.15.4 LR-WPAN:
◦ IEEE 802.1 5.4 is a collections of standard for low rate wireless
personal area network(LR-WPAN).
◦ These standard form the basis of specifications for high level
communication Zigbee.
◦ LR-WPAN standards provide data rates from 40 k b/ s.
◦ These standards provide low cost and low speed Communications
for power constrained devices.

 Network / internet layer :
◦ The network layer are responsible for sending of IP data grams from the source network to
the destination network.
◦ This layer Performs the host addressing and packet routing.
 IPV4: Internet protocol versions for open parents close (IPV4) is there most deployed internet
protocol.
 As more and more devices got connected to the internet.
 IPv6: It is the newest versions of internet protocol and successor to IPv4.
 6LoWPAN:
 IPv6 over low power wireless personal area networks brings IP protocol to the low power device which
have limited processing capability it operate in the 2.4 GHz frequency range and provide the data
transfer rate off to 50 kb/s.

 Transport layer :
◦ The Transport layer protocols provides end-to-end message transfer capability
independent of the underlying network.
◦ The message transfer capability can be set up on connections, either using handshake or
without handshake acknowledgements. Provides functions such as error control ,
segmentation, flow control and congestion control.
◦ TCP: Transmission control protocol is the most widely used to transport layer protocol
that is used by the web browsers along with HTTP , HTTPS application layer protocols
email program (SMTP application layer protocol) and file transfer protocol.
◦ TCP is a connection Oriented and statefull protocol while IP protocol deals with sending
packets, TCP ensures reliable transmissions of packets in order.

 Application layer :
◦ Application layer protocol define how the application interfaces with the lower layer
protocols to send the data over the network.
◦ Data are typically in files, is encoded by the application layer protocol and encapsulated in
the transport layer protocol .
◦ Application layer protocol enable process-to-process connection using ports.
◦ Http: Hypertext transfer protocol is the application layer protocol that forms the
foundations of world wide web http includes, ,commands such as GET, PUT, POST,
DELETE, HEAD, TRACE, OPTIONS etc.
◦ CoAP: Constrained application protocol is an application layer protocol for machine to
machine application M2M meant for constrained environment with constrained devices
and constrained networks.
◦ Websocket:Websocket protocol allows full duplex communication over a single socket
connections for sending message between client and server. Websocket is based on TCP
and Allows streams of messages to be sent back and forth between the client and server
while keeping the TCP connection open.

◦ MQTT :Message Queue Telemetry Transport it is a lightweight message protocol based on
public -subscribe model MQTT uses a client server Architecture by the clients such as an
IoT device connect to the server also called the MQTT broker and publishers message to
topic on the server.
◦ XMPP: Extensible Messaging and Presence Protocol it is a protocol for real-time
communication and streaming XML data between network entities XMPP powers wide
range of applications including messaging, presence, data syndication, gaming multiparty
chat and voice / voice calls.
◦ DDS: Data distribution service is the date centric middleware standard for device-to-
device machine to machine communication DDS uses a publish subscribe model where
publisher example device that generate data create topics to which subscribers per can
subscribe publisher is an object responsible for data distributions and the subscriber
responsible for receiving published data.

 AMQP:
◦ Advanced Message Queuing protocols. it is an open application layer protocol for
business messaging.
◦ AMQP support point to point and publish - subscribe model routing and queuing.

 Def:
 Logical design of an IoT system refers to an abstract representation of the
entities and process without going into low level specification of the
implementations .

 IoT functional block:
◦ An IoT system comprises of a number of functional blocks that provide the system the
capabilities for identification , sensing, actuation ,communication and Management.
◦ The function blocks are described as follows

 Devices:
◦ An IoT system comprises of the devices that provide sensing, actuation, monitoring and control
function
 Communication:
◦ communication block handle the communication systems
 Services :
◦ An IoT system uses various types of IoT services such as services for device monitoring ,device
control services ,data publishing services and services for device Discovery.
 Management:
◦ Functional blocks provide various functions to govern the IoT system
 Security:
◦ Security functional block security IoT system and by providing functions such as application
authorization message and content integrity and data security.
 Application:
◦ IoT application provides and interface that the user can used to control and monitor various aspects
of the IoT system. Application also allow users to view the system status and view or analyze the
processed to data.

 IoT communication model
 Request response:
◦ Request-response is a Communications model in which the client sends request to the
server and the server responds to the requests.
◦ when the server receives a request it decides how to respond,
 Publish - Subscribe:
◦ Respect is a communication model that involve Publishers brokers and consumers.
◦ Publishers are the source of data.
◦ Publishers send the data to the topics which is managed by the broker. Publishers are
not aware of the consumer.
◦ Consumers Subscribe to the topic which are managed by the broker.
◦ When the broker receives the data for a topic from the publisher, it send the data to all
the subscribed consumers.

 Push pull:
◦ Push pull is communication model in which the data producers push the data to queues
and the consumers pull the data from the queues. Producers do not need to be aware of
the consumer.
◦ Queues help in decoupling the messaging between the Producers and Consumers .
 Exclusive pair:
◦ Exclusive pair is a bi directional, fully duplex communication model that uses a
persistent connections between the client and the server.
◦ once the condition is setup it remains open until the client sends a request to close the
connection.
◦ client and server can send messages to each other after connection setup.
◦ Exclusive pair is a stateful Communications model and the server is aware of all the
open connections

 IoT communication APIs
 REST- based communication API:
◦ Representational state transfer is a set of architectural principles by which you
can design web service and Web API that focus on a system resources and how
resources states and addressed the transferred.
◦ REST API follow the request- response communication model.
 The REST architectural constraints apply to the components, connectors,
and data elements .
 Client server:
◦ The principle behind the client-server conference separations of concerns for
example client should not be concerned with the storage of data which is their
concern of the server.
◦ Similarly the server should not be concerned about the user interface which is a
concern of the client.
◦ separation allows client and server to be independently deployed and updated.

 Stateless:
◦ Each request from client to server must contain all the information necessary to understand the
request , and cannot take advantage of any stored context on the server .
 Catchable:
◦ Catch constrain requires that the data within the response to a request be implicitly or
explicitly labeled as catchable or non-catchable.
◦ Then a client cache is given the right to reuse that response data for later, equivalent requests.
◦ completely eliminate some attractions and improve efficiency and scalability.
 Layered system:
◦ System constraint come off constraints, constrains the behavior of components such that each
component cannot see beyond the immediate layer with which they are interacting.
◦ Example client cannot tell whether it is connected directly to the end server or to an
intermediary along the way system scalability can be improved allowing intermediaries to
respond to request instead of tender server.

 Uniform interface:
◦ Uniform interface constraints requires that the method of communication between
client and server must be uniform.
◦ Resources are identified in the request and separate from the representation of the
resource that are returned to the client.
◦ When climbing holds a representation of your resource it has all the information
required to update or delete the resource
 Code on demand :
◦ Service can provide executable code script for clients to execute in their context.

 Web Socket based communication API:
◦ Web Socket API allow bi directional, full duplex communication between client and
server.
◦ Unlike request-response API allow full duplex communication and do not require new
connection to be set up for each message to be sent.
◦ Web socket communication begins with connection setup request send by the client to
the server.
◦ The request is sent over http and the server interprets it as an upgrade request.
◦ If the server support protocol response to the website handshake response after the
connection setup the client and the server can send data or messages to each other in
full duplex model.
◦ Web Socket API reduce network traffic and latency as there is no overhead for
connection setup and determination records to each message.

 Def:
◦ It is enabled by several Technologies including wireless sensor networks, cloud
computing big Data Analytics, embedded system, security protocols and architectures,
communication protocols, web service, mobile internet and semantic search engine .

 wireless sensor network :
◦ Wireless sensor network ( wsn) comprise of distributed devices with the sensor which
are used to monitor the environmental and physical conditions.
◦ A WSN consists of a number of end nodes and routers and a coordinator. End nodes
have several sensors attached to them. End node can also act as a routers.
◦ Routers are responsible for routing the data packet from end nodes to the coordinator.
The coordinator node collect the data from all the notes coordinator also act as a
Gateway that connects the WSN to the internet

 IoT systems are described as follows
◦ Weather monitoring system using WSN in which the nodes collect temperature,
humidity and other data which is aggregated and analyzed .
◦ Indoor air quality monitoring system using WSN to collect data on the indoor air
quality and connections of various gases.
◦ Soil moisture monitoring system using WSN to monitor soil moisture at various
location.
◦ Surveillance systems use WSN for collecting surveillance data(motion detection data)
◦ Smart grid use wireless sensor network for monitoring the grid at various point.
◦ Structural health monitoring systems use WSN to monitor the health of structure by
writing vibration data from sensor nodes deployed at various points in the structure.

 Cloud computing:
◦ Cloud Computing is a transformative computing paradigm that involves delivering
applications and services over the internet.
◦ Cloud Computing involves provisioning of computing networking and storage resources on
demand and providing these resources as metered services to the users, in a “ pay as you go”
model.
◦ cloud Computing resources can be provisioned on demand by the user without requiring
interactions with the Cloud Service Provider.
◦ The process of provisioning resources used automatic Cloud Computing resources can be
accessed then it worked using standard access mechanism that provide platform-independent
access through the use of heterogeneous client platforms such as workstations laptops tablets
and Smartphones the computing and storage resources provided by Cloud Service Provider our
food to serve multiple user using multi Tenancy.
◦ Multi-tenant aspects on the multiple users to be served by the same physical hardware .

 Cloud Computing services are offered to user in different forms
 Infrastructure as a service(IAAS) :
 IaaS provides the user the ability provision computing and storage resources. These
resources are provided to the users as virtual machine instances and virtual storage.
Users can start, stop configure and manage the virtual machines instance on the virtual
storage using can deploy operating systems and applications on their choice on the
actual resources provisions in the cloud . Cloud Service Provider manages the underlying
infrastructure.
 Platform as a service(PaaS) :
 platform as a service provides the user the ability to develop and deploy application in
the cloud using the deployment tool application programming interfaces API, software
libraries and services provided by the Cloud Service Provider. The Cloud Service Provider
manages the underlying cloud infrastructure including servers, network, operating
systems and storage .
 Software as a service(SaaS) :
 Provide the user a complete software applications of the user interface to the application
itself . The Cloud Service Provider manage the underlying cloud infrastructure including
server, network storage and application software, and the user is unaware of the
underlying architecture of the cloud. Applications are provided to the user through a
thin client interface example Browser application. SaaS applications are accessed from
various client smartphones running different operating system.

 In this section we define various levels of IoT systems with increasing
completely.
 IoT system comprises of the following components:
 Device : An IoT device allow identification, remote sensing, actuating and
remote monitoring capabilities.
 Resources : Resources are software components on the device for
accessing and storing information for controlling actuator connected to the
device also include software components that enable network access for the
device .

 Controller service: Controller Service is a native service that runs on the
device and interact with the web services. Controller service sends data
from the device to the web service receive command from the application
from controlling the device.
 Database: Database can be either local or in the cloud and stores the data
generated by the IoT device.
 Web service: Serve as a link between the device, application database and
analysis components. Web Services can be implemented using HTTP and
REST principles or using website protocol.

 A comparison of restaurant website is provided below:
◦ Stateless/stateful:
 Rest services stateless in nature.
 Each request contain all the information needed to process it.
 Request are independent of each other.
- Directional / Bi- directional:
- REST service operate over http and unidirectional.
- Request is always sent by a client and the server response to the request.

 Request response / full duplex:
◦ REST service follower request response Communications model where the client
sends request and the server response to the request
 TCP connections:
◦ For REST Service each http request involves setting up in a new TCP connections
Websocket on the other hand involves a single TCP connection over which the client
and server communicate in a full duplex mode.
 Headache Overhead:
◦ REST service operate over http , and each request is independent of others . Thus each
request carries http header which is an overhead.

 Scalability:
◦ Scalability is easier in this case of the REST services of request are independent And
no state information needs to be maintained by the server.
◦ Thus both horizontal out and vertical scaling solutions are possible for REST services.
 Analysis component:
◦ The analysis component is responsible for analyzing the IoT data and generate results
in the form which are easy for the user to understand.
 Application:
◦ IoT applications provide an interface that the user can use to control and monitor
various aspects of the IoT system.
◦ Applications also allow user to view the system status and view the processed data.

IoT.pptx .in this we can see about more details

More Related Content

Similar to IoT.pptx .in this we can see about more details (20)

Recently uploaded (20)

IoT.pptx .in this we can see about more details