Load Test Methodology: Server Load Testing

Rethink Server Load Testing

Guidelines to measure the performance, security, and stability of application and web servers under
real-world network conditions

www.breakingpoint.com
© 2005 - 2010. BreakingPoint Systems, Inc. All rights reserved. The BreakingPoint logo is a trademark of BreakingPoint Systems, Inc. 1
All other trademarks are the property of their respective owners.


Table of Contents
Introduction .................................................................................................................................................................................................................... 3

Load Generator: HTTP Status Codes ...................................................................................................................................................................... 5

Load Generator: HTTP Client Login ........................................................................................................................................................................ 25

Load Generator: HTTP Verify Page .......................................................................................................................................................................... 39

Load Generator: SMB Login, Create, Read and Delete Files........................................................................................................................... 53

Load Generator: Sending and Retrieving Email using SMTP and IMAP .................................................................................................... 69

Load Generator: Sending and Retrieving Email using SMTP and POP3.................................................................................................... 93

Load Generator: Using MS SQL to add and query a database...................................................................................................................... 111

Load Generator: Using MySQL to add and query a database ....................................................................................................................... 128

About BreakingPoint ................................................................................................................................................................................................... 144



Introduction
What is the capacity of your data center? Will it withstand peak user load? What about attack? Will a simple distributed denial-of-service
attack disrupt critical business transactions? And what about those new high-performance enterprise servers you are evaluating? Will they
really live up to the promises promoted in the vendor’s data sheet?

If you cannot properly measure your servers’ performance, security and stability, you won’t have any defensible answers to these questions.
Your business performance and reputation are at risk, and it’s time to take a new approach to hardening your data center and establishing
server load resiliency.

Measuring server resiliency is about knowing how they will weather hostile conditions, including attack and extreme load, and optimizing
your overall performance to drive business results. Understanding the resiliency of your data center or cloud infrastructure, in the face of
high-stress traffic and cyberattack, requires the ability to simulate user behavior and load at incredibly high performance and throughput
levels. Software-based server load testing, developed more than a decade ago, no longer meets today’s mega-data-center requirements.

The BreakingPoint Server Load Resiliency Methodology provides a guideline for measuring server and data center resiliency in the face of
real-world application traffic, live security attacks and the stress from millions of users. With the ability to simulate these real-world hostile
conditions using the BreakingPoint Cyber Tomography Machine, you can pinpoint hidden stress fractures and calculate a defensible
resiliency score for the certainty you need to mitigate IT risks and drastically reduce costs.

With the breakthrough power of cyber tomography, BreakingPoint provides realistic network simulation of millions of simultaneous user
sessions with blended, realistic application traffic from a small footprint product, eliminating costly racks of servers and software licenses.
BreakingPoint products can help you stress and score your critical network infrastructure with real-world network conditions to:

• Reduce risks associated with data center consolidation or migration
• Improve availability and performance to reduce outages and prevent lost customers, revenue and productivity
• Measure and optimize capacity to deliver the right balance of performance, security and stability in the face of escalating traffic
volume
• Assess resiliency against attack and data loss to mitigate security breaches
• Make better IT investment decisions and eliminate the need for sprawling performance and security test labs

The BreakingPoint Server Load Resiliency Methodology includes the following simulations:

Load Generator: HTTP Status Codes
Determine the ability of the Web server to correctly respond to Web page requests. This will help validate the performance of the Web
server and verify whether it is able to correctly handle the number of requests. A Client Simulator component will be used, along with Perl
Regular Expressions, to determine the returned HTTP status codes from the Web server.

Load Generator: HTTP Client Login
Determine the ability of the Web server to correctly handle restricted Web space and still be able to respond to Web page requests cor-
rectly. This will help validate the performance of the Web server while it is also performing other tasks, and verify whether it is able to still
handle a high volume of requests. A ClientSim component will be used, along with Perl Regular Expressions, to determine the returned HTTP
status codes.

Load Generator: HTTP Verify Page
This verifies whether the Web server is correctly responding and whether the Web page is correctly being transmitted. A Web page that
resides on the Web server will be uploaded to the BreakingPoint Storm CTM. The Client Simulator component will request this page and it will
be verified as being either correct or incorrect.



Load Generator: SMB Login, Create, Read and Delete Files
This determines the ability of an SMB share. The SMB share will be stressed by having multiple files created, read and deleted. If any of these
actions fail, the SMB share is either not configured correctly or unable to support the required load. A Client Simulator component will be used
and the SMB results will be verified.

Load Generator: Sending and Retrieving Email using SMTP and IMAP
This is a two-step process involving both SMTP and IMAP. This simulation will determine the ability of the SMTP server to successfully trans-
mit emails. After emails have been sent to a valid email address, IMAP will be used to retrieve those newly received emails. To verify that the
simulation was successful, the email server will be checked to make sure that the emails have been received and opened.

Load Generator: Sending and Retrieving Email using SMTP and POP3
This is a two-step process involving both SMTP and POP3. This simulation will determine the ability of the SMTP server to successfully trans-
mit emails. After emails have been sent to a valid email address, POP3 will be used to retrieve those newly received emails. To verify that the
simulation was successful, the email server will be checked to make sure that the emails have been received and opened.

Load Generator: Using MS SQL to add and query a database
This will determine the ability and configuration of an MS SQL database. The simulation involves first adding new content to an empty data-
base. Once new content has successfully been added, it will be queried. The database will be viewed to make sure that the data added to it is
actually present in the database.

Load Generator: Using MySQL to add and query a database
This will determine the ability and configuration of a MySQL database. The simulation involves first adding new content to an empty data-
base. Once new content has successfully been added, it will be queried. The database will be viewed to make sure that the data added to it is
actually present in the database.

The following methodology was performed using BreakingPoint OS version 1.4.1 and ATI Pack 59235. For more information on BreakingPoint
products, solutions and services visit www.breakingpoint.com.



Load Generator: HTTP Status Codes
RFC:
• RFC 2616 – Hypertext Transfer Protocol

Overview:
A new Super Flow will be created on the BreakingPoint Storm CTM. The Super Flow will be configured to download a single Web page from
the Web server and then a conditional request will be used to track the HTTP status codes returned. The results from the returned HTTP
status codes will be analyzed.

Objective:
To evaluate the ability of the HTTP server to respond to multiple requests.

Setup:



1. Launch your favorite Web browser and connect to the BreakingPoint Storm CTM. Click Start BreakingPoint Systems Control
Center once the page loads.

2. In the new window that appears, type your Login ID and Password. Click Login.



3. Reserve the required port to run the test.

4. Select Control Center  Network Neighborhood.



5. Under the Network Neighborhoods heading, click the Create a new network neighborhood button.

6. In the Give the new network neighborhood a name box, enter Load Generator as the name and click Ok.



7. Notice multiple Interface tabs are available for configuration. Only one is required for the tests. The first interface tab should
be selected. Click the X to delete this interface. When prompted about removing the interface, click Yes. The remaining
interfaces will be renamed. Repeat this process until only one interface remains.

8. With Interface 1 selected, click the Show subnet details button.



9. Configure the Network IP Address, Network Mask, Gateway IP Address (if required); use the Type drop-down menu to select
Host, and then configure the Minimum IP Address, and the Maximum IP Address. Click Accept.

10. Select the External tab and then click the Delete range button.



11. When prompted about being sure about deleting the subnet, click Yes.

12. Click the Create a new range button.



13. Enter the Minimum IP Address. The Maximum IP Address should automatically be filled in. Click Create once completed.

14. Finally, click Save Network.



15. Now that the Network Neighborhood has been created, the Super Flow can be configured. Select Managers à Application
Manager.

16. Select the Super Flows tab and click the create a new Super Flow button.



17. Enter HTTP Status as the name of the new Super Flow and click Ok.

18. In the Define Flows section, use the Protocol drop-down menu and select HTTP. Click Add Flow once completed.

19. Make sure that the new flow has been selected in the Define Flows field. In the Define Actions field using the Action drop-
down menu, select Client: GET.

Click the Add Action button once completed.



20. Again, using the Action drop-down menu, select Client: Conditional Request. Click the Add Action button once completed.

21. Select the first action in the Define Actions section. Click the Edit the selected actions parameters button.

22. Enable Request path (e.g., /dir/page.htm) and enter a known Web page on your server, i.e. /index.html. Click Apply Changes
once completed.



23. Next, select the second action in the Define Actions section. Click the Edit the selected actions parameters button.

24. The Conditional Request window allows for regular expressions (regex). The syntax of the regex follows the Perl standard.
This test is going to verify status codes sent by the server. The first Match field should contain a regex that will match a 200-
page response, while the second Match should match any 300-page responses, and the third Match should match any 500-
page responses. Make sure the Regex radio button is selected for each Match field. Click Apply Changes once completed.



25. Once completed, click Save Super Flow.

26. Select Test  New Test.

27. Under the Test Quick Steps, click Select the DUT/Network.



28. In the Choose a device under test and network neighborhood window under the Device Under Test(s) section, verify that
BreakingPoint Default is selected. Under Network Neighborhood(s), verify that the newly created one is selected. Click
Accept.

29. When prompted about switching Network Neighborhoods because the current setup contains more interfaces, click Yes.



30. Under Test Quick Steps, click Add a Test Component.

31. In the Select a component type window, click Client Simulator (L7).

32. Under the Information tab, enter HTTP Status Codes as the name and click Apply Changes.



33. Select the Interfaces tab. Verify that only External Server and Interface 1 Client are enabled and click Apply Changes.

34. Select the Parameters tab. Several parameters will be changed in this section. The first parameter that needs to be updated
is the Minimum data rate. Enter a value of 1000 (if your server supports gigabit Ethernet) and click Apply Changes.

35. The next parameter to be changed is the Steady-State Seconds. Update this to a run time of 5 minutes and click Apply
Changes.



36. Next, both Maximum Simultaneous Sessions and Maximum Sessions Per Second will be updated. Enter values that your
server is expected to be able to handle and click Apply Changes.

37. The last parameter that needs to be changed is selecting the Super Flow that was created earlier. Using the Super Flow drop-
down menu select HTTP Status and click Apply Changes.

38. Under Test Quick Steps select Save and Run.



39. When prompted for a name to save the test as, enter Load Generator HTTP Status and click Save.

The Summary tab initially will be displayed. A great amount of information is seen on this screen, from the TCP Connection Rate to the
Cumulative TCP Connections to the Bandwidth being used.



40. Select the Client tab. This displays information about the client’s connections and if they are successful or not. Verify that
connections are successfully being made.

41. Once the test completes, a window will appear stating the test passed. Click Close to continue.



42. Next, select the View the report button.

43. Expand the Test Results for HTTP Status Codes folder, and then expand the Details folder. Select Response Summary.
Determine what code pages were sent. Every page should have responded with an HTTP/1.1 200.



Load Generator: HTTP Client Login
RFC:

Overview:
The BreakingPoint Storm CTM will be configured to access a single Web page that is password protected. A Super Flow will be created that
provides the ability to log in to the Web page. The HTTP status codes will be viewed to determine if the logins were successful.

Objective:
To evaluate the ability of the HTTP server to handle password restricted pages and respond to multiple requests.

Setup:




4. Select Managers  Application Manager to configure a new Super Flow for this test.



5. Select the Super Flows tab and click the Create a new Super Flow button.

6. Enter HTTP Client Login as the name of the new Super Flow and click Ok.



7. In the Define Flows section, use the Protocol drop-down menu and select HTTP. Click Add Flow once completed.

8. Make sure the new flow has been selected in the Define Flows field. In the Define Actions field using the Action drop-down
menu, select Client: GET (authenticated). Click the Add Action button once completed.

9. Again, using the Action drop-down menu, select Client: Conditional Request. Click the Add Action button once completed.



10. Select the first action in the Define Actions section. Click the Edit the selected actions parameters button.

11. Using the HTTP Auth Scheme drop-down menu, choose the correct type of authentication. Next, enable both Username and
Password making sure to enter a valid username and password in those fields. Finally, enable Request path (e.g., /dir/page.
htm) and enter a known Web page on your server and click Apply Changes once completed.

12. Next, select the second action in the Define Actions section. Click the Edit the selected actions parameters button.



13. The Conditional Request window allows for regular expressions. The syntax of the regular expressions follows the Perl
standard. This test will verify status codes sent by the server. The first Match field should contain a regex that will match
a 200-page response, while the second Match should match any 300-page responses, and the third Match should match
any 500-page responses. Make sure the Regex radio button is selected for each Match field. Click Apply Changes once
completed.




15. Select Test à New Test.


Accept.



21. Under the Information tab, enter HTTP Login as the Name and click Apply Changes.

22. Select the Interfaces tab. Verify that only External Server and Interface 1 Client are enabled.




Changes.


down menu select HTTP Client Login and click Apply Changes.




28. When prompted for a name to save the test as, enter Load Generator HTTP Login and click Save.





30. Once the test completes, a window will appear stating that the test passed. Click Close to continue.




32. Expand the Test Results for HTTP Login folder, and then expand the Details folder. Select Response Summary. Determine
what code pages were sent—every page should have responded with an HTTP/1.1 200.



Load Generator: HTTP Verify Page
RFC:

Overview:
A new Super Flow will be created on the BreakingPoint Storm CTM. The Super Flow will be configured to download a single Web page
from the Web server and then a conditional request will be used to track the HTTP status codes returned. The page then will be verified to
determine that it was correctly received.

Objective:
To evaluate the ability of the HTTP server to respond to multiple requests and successfully transmit the Web page correctly.

Setup:



5. Select the Super Flows tab and locate HTTP Status Super Flow and click Save As.

6. Enter HTTP Verify File as the name of the new Super Flow and click Ok.



7. Make sure the flow has been selected in the Define Flows field. In the Define Actions field using the Action drop-down
menu, select Server: Verify File.

Click the Add Action button once completed.

8. Select the newly added action in the Define Actions section. Click the Edit the selected actions parameters button.



9. Click the Import File to verify link.

10. Locate the correct file using the Browse button. Click the Upload button once the file has been selected.



11. Enable File to verify and using the drop-down menu, select the newly uploaded file. Click Apply Changes once completed.






Accept.



19. Under the Information tab, enter HTTP Verify as the name and click Apply Changes.





Changes.


down menu, select HTTP Verify File and click Apply Changes.



25. Under Test Quick Steps, select Save and Run.

26. When prompted for a name to save the test as, enter Load Generator HTTP Verify and click Save.





28. Once the test completes, a window will appear, stating that the test either passed or failed. If the test failed, it is because
not enough pages were verified as being correct. Click Close to continue.




30. Expand the Test Results for HTTP Verify folder, and then expand the Details folder. Select Response Summary. Determine
what code pages were sent—every page should have been responded with an HTTP/1.1 200. This step is just a way to verify
that pages were received with the correct status code.



Load Generator: SMB Login, Create, Read and Delete Files
RFC:
• RFC 1001 – Protocol Standard for a NetBIOS service on a TCP/UDP transport: Concepts and Methods
• RFC 1002 – Protocol Standard for a NetBIOS service on a TCP/UDP transport: Detailed specifications
• RFC 1088 – Standard for the transmission of IP datagrams over NetBIOS networks

Overview:
A new Super Flow will be created that logs into a SMB share. Once logged into the SMB share, the Super Flow will create new files on the
share, and read the files to make sure they were correctly created and finally delete the files. If the share being tested does not allow for
some of these actions to be performed, then that part of the test can be removed. This test will help verify that the SMB server is correctly
configured and able to support the required load.

Objective:
To evaluate the ability of the SMB server to accept logins and create, read and delete multiple files.

Setup:



5. Select the Super Flows tab and click the Create a new Super Flow button.

6. Enter SMB Client Actions as the name of the new Super Flow and click Ok.



7. In the Define Flows section use the Protocol drop-down menu and select SMB File Stress. Click Add Flow once completed.

8. Make sure the new flow has been selected in the Define Flows field. In the Define Actions field using the Action drop-down
menu, select Client: Authenticate. Click the Add Action button once completed.

9. Using the Action drop-down menu select Client: Write file to share, Client: Read file from share, Client: Delete file from
share, Client: Goto and Client: Disconnect. Click the Add Action button to add each one individually.



10. Select the Client: Authenticate action in the Define Actions section. Click the Edit the selected actions parameters button.

11. Enable Share Name, Username, and Password. Enter a valued share in the Share Name field. Also, enter a valid username
and password in the respective fields. Make sure the user being used has full read and write permissions on the share.
Finally, the Protocol Version drop-down menu can be used to select either SMB or SMBv2. Click Apply Changes once
completed.



12. Select Client: Write file to share in the Define Actions section. Click the Edit the selected actions parameters button.

13. Enable File Name and enter smb-test%f-%g.txt. The %f is a wild card for the flow ID and the %g is a wild card for the Goto
loop iteration number. If desired, enter values for the Minimum Random Filesize and the Maximum Random Filesize
parameters. Once completed, click Apply Changes.

14. Select Client: Read file from share in the Define Actions section. Click the Edit the selected actions parameters button.



15. Enable File Name and enter the same string of text as before, smb-test%f-%g.txt.

16. Select Client: Delete file from share in the Define Actions section. Click the Edit the selected actions parameters button.

17. Enable File Name and enter the same string of text as before, smb-test%f-%g.txt.



18. Select Client: Goto in the Define Actions section. Click the Edit the selected actions parameters button.

19. Using the Goto Action drop-down menu, select 2:Write file to share. Enter a value of 5 in the Iterations field. This will loop
over the write, read and delete actions five times.






Accept.



27. Under the Information tab, enter SMB File Stress as the name and click Apply Changes.





Changes.


down menu select SMB Client Actions and click Apply Changes.




34. When prompted for a name to save the test as, enter Load Generator SMB and click Save.





36. Once the test completes, a window will appear, stating that the test passed. Click Close to continue.




38. Expand the Test Results for SMB File Stress Login folder. Select SMB Summary. Determine that files were successfully
written, read and deleted. Also, log in to the share or check on the server that the files were deleted too.



Load Generator: Sending and Retrieving Email using SMTP and IMAP
RFC:
• RFC 2060 – Internet Message Access Protocol
• RFC 821 – Simple Mail Transfer Protocol

Overview:
A new Super Flow will be created that sends emails using the SMTP server. These emails will then be retrieved using IMAP. The emails will
be deleted to help keep the mailbox clean. This will help to verify that the SMTP and IMAP servers are both able to handle the required load
and are correctly configured to allow emails to be sent, received and retrieved without any troubles.

Objective:
To evaluate the ability of the SMTP server to send and receive emails and the ability of the IMAP server to handle the requests to retrieve
emails.

Setup:



5. Select the Super Flows tab. Locate the BreakingPoint ClientSim SMTP and click the Save As link.

6. Enter Load Generator SMTPIMAP as the name and click the Ok button.



7. In the Define Actions sections, select the first item and click the Edit the selected actions parameters button.

8. In the Conditional Request window, make sure that the first Match field is the only field that has data in it. Delete any other
information. Also, make sure that the first Match field has Regex enabled. Once completed, click the Apply Changes button.



9. Select the third item, Client: Send email and click the Edit the selected parameters button.

10. Change both the Protocol FROM Username and the Protocol RCPT Username to valid email addresses. Click Apply Changes
once completed.

11. Click the Create a new flow button in the Define Flows section.



12. Using the Server drop-down menu, select SMTP Server. As the SMTP server and the IMAPv4 Server reside on the same
system, another server does not need to be created. Using the Protocol drop-down menu, select IMAPv4-Advanced. Click
Add Flow.

13. With the newly added flow selected in the Define Actions field using the Action drop-down menu, select Client: Conditional
Request. Click Add Action.



14. Using the Action drop-down menu select Client: Login and click the Add Action button.

15. Again, using the Action drop-down menu, add another Client: Conditional Requests.

16. Using the Action drop-down menu, select Client: Fetch and click the Add Action button.



17. Using the Action drop-down menu, select Client: Logout and click the Add Action button.

18. Using the Action drop-down menu, select Server: Bye and click the Add Action button.

19. Locate the first IMAPv4-Advanced action. Click the Edit the selected action parameters button.



20. Disable the Transaction Flag box and enter * OK in the first Match field and OK in the second. Scroll down to the Mismatch
section. Locate Client: Goto in the Actions drop-down menu. Click Add Action.



21. Select the newly added action and click Edit the selected action parameters.

22. Change the Goto Action to 11: Logout and click Apply Changes.

23. Again, back in the Conditional Request window, click Apply Changes.



24. Select the Client: Login action and click the Edit the select action parameters button.

25. Disable Transaction Flag and Starting Tag Value (0 == Random). Enable both Username and Password entering in the correct
value for both. Click Apply Changes once completed.

26. Select the third item, Client: Conditional Request and click the Edit the select action parameters button.



27. Disable Transaction Flag and for the first Match enable Regex and enter [x21-x7f] OK as the value.

28. Scroll down and locate Mismatch. Locate Client: Goto in the Actions drop-down menu. Click Add Action.

29. Select the newly added action and click Edit the selected action parameters.



30. Change the Goto Action to 11: Logout and click Apply Changes.

31. In the Conditional Request window, click Apply Changes.

32. Select Client: Fetch from the Define Actions list. Click the Edit the select parameters button.



33. Enable Message UID (0 == Random) and enter a value of 0. Click Apply Changes once completed.

34. Select Client: Logout from the Define Actions list. Click the Edit the select parameters button.



35. Disable Command Tag Value (0 == Random) and click Apply Changes once competed.

36. Select Server: Bye from the Define Actions list. Click the Edit the select parameters button.

37. Disable the Command Tag Value (0 == Random) and click Apply Changes once competed.



38. Click the Save Super Flow button.





Accept.




45. Under the Information tab enter SMTP IMAP as the name and click Apply Changes.





Changes.


down menu, select Load Generator SMTPIMAP and click Apply Changes.




52. When prompted for a name to save the test as, enter Load Generator SMTP IMAP and click Save.




53. Select the Client tab and make sure TCP connections are being established.




55. Log in to the mail server and verify that new mail is present and that it has been opened.



Load Generator: Sending and Retrieving Email using SMTP and POP3
RFC:
• RFC 2060 – Internet Message Access Protocol
• RFC 1939 – Post Office Protocol – Version 3

Overview:
A new Super Flow will be created that sends emails using the SMTP server. These emails will then be retrieved using POP3. The emails will
be deleted to help keep the mailbox clean. This will help to verify that the SMTP and POP3 servers are both able to handle the required load
and are correctly configured to allow emails to be sent, received and retrieved without any troubles.

Objective:
To evaluate the ability of the SMTP server to send and receive emails and the ability of the POP3 server to handle the requests to retrieve
emails.

Setup:



5. Select the Super Flows tab. Locate the BreakingPoint ClientSim SMTP and click the Save As link.

6. Enter Load Generator SMTPPOP3 as the name and click the Ok button.



7. In the Define Actions sections select the first item and click the Edit the selected actions parameters button.

8. In the Conditional Request window, make sure that the first Match field is the only field that contains data. Delete any other
information. Also, make sure that the first Match field has Regex enabled. Once completed, click the Apply Changes button.



9. Select the third item, Client: Send email and click the Edit the selected parameters button.

10. Change both the Protocol FROM Username and the Protocol RCPT Username to valid email addresses. Click Apply Changes
once completed.

11. Click the Create a new Super Flow button in the Define Flows section.



12. Using the Server drop-down menu, select SMTP Server. Because the SMTP server and the POP3 Server reside on the same
system, there is no need to create another server. Using the Protocol drop-down menu, select POP3-Advanced. Click Add
Flow.

13. With the newly added flow selected in the Define Actions section, use the Action drop-down menu and select Client:
Conditional Request. Click Add Action once completed.



14. From the Action drop-down menu, select Client: RETR (Command Loop). Click the Add Action button once completed.

15. Using the Action drop-down menu, select Client: Quit. Once completed click the Add Action button.

16. Select the first POP3-Advanced action and click the Edit the selected action parameters button.



17. In the Conditional Request window, disable the Transaction Flag and in the first Match field enter +OK. Using the Actions
drop-down menu, select Client: Login. Click the Add Action button once completed.

18. Select the newly added action and click the Edit the selected action parameters button.

19. Enable both Username and Constant Password. Enter appropriate values for both. Click Apply Changes once completed.



20. Click Apply Changes once on the Conditional Request window.

21. Select the RETR (Command Loop) in the Define Actions section. Click the Edit the selected action parameters button.



22. In the RETR (Command Loop) window, make sure that only Transaction Flag and Number of Messages are enabled. Leave
Transaction Flag set to Continue and enter a realistic value for Number of Messages. Click Apply Changes once completed.

23. Nothing needs to be changed with the Client: Quit action. Click Save Super Flow.





Accept.



30. Under the Information tab, enter SMTP POP3 as the name and click Apply Changes.





Changes.


down menu select Load Generator SMTPPOP3 and click Apply Changes.




37. When prompted for a name to save the test as, enter Load Generator SMTP POP3 and click Save.




38. Select the Client tab and make sure TCP connections are being established.




40. As the mail was just retrieved and not deleted from the mail server, as is typical with POP3, mail should still reside on the
server. Login and check the contents of the inbox and verify that new mail is present and has been opened.



Load Generator: Using MS SQL to add and query a database
Overview:
A new Super Flow will be created that adds content into the MS SQL database. This content will then be queried to verify that it has correctly
been added into the database. The final part of the Super Flow will delete the content from the database to keep it clean without content.
This will help determine whether the configuration is correct and allows addition of content, querying of the content and deletion.

Objective:
To evaluate the ability of the MS SQL server to handle the addition of new content, queries for content and the deletion of content.

Setup:



5. Select the Super Flows tab and locate BreakingPoint ClientSim MS-SQL and click the Save As link.

6. Enter Load Generator MS SQL as the name of the new Super Flow and click Ok.



7. Almost everything in this Super Flow has been configured. Changes will have to be made in the Define Actions sections to
specify the database and add some new SQL statements. Select the first item, Client: Login Request, and click the Edit the
selected actions parameters button.

8. In the Login Request window, update the Username, Password and Server Name to match your MS SQL configuration. Also,
disable Client Name and Client Application. Click Apply Changes once completed.

9. Select the third item, Client: Conditional Request, and click the Edit the selected actions parameters button.



10. In the Conditional Request window click the Edit the selected actions parameters button.

11. Change the Database Name to a configured database on your MS SQL Server and click Apply Changes.



12. In the Conditional Request window, click Apply Changes.

13. Select the fourth item, Client: Conditional Request, and click the Edit the selected actions parameters button.



14. In the Conditional Request window, edit the Match field to include your database and then click the Edit the selected
actions parameters button.

15. Change the SQL Query field to an SQL statement that will update the tables in the database. For example, INSERT INTO
bpoint VALUES (‘Rams’, ‘Cardinals’). Once completed, click the Apply Changes button.

16. Using the Actions drop-down menu select Client: Query: Select Request and click the Add Action button.



17. Select the newly added item and click the Edit the selected actions parameters button.

18. Enable the SQL Query field and enter an SQL Select statement to select data from a table. For example: SELECT footballs_
teams, baseball_teams FROM bpoint. Click the Apply Changes button once completed.



19. From the Conditional Request window, click the Apply Changes button.

20. From the main Super Flow configuration screen, select the sixth item in the Define Actions sections and click the Delete
button. Once completed, click Save Super Flow.





Accept.



27. Under the Information tab, enter MS SQL as the name and click Apply Changes.





Changes.


down menu select Load Generator MS SQL and click Apply Changes.




34. When prompted for a name to save the test as, enter Load Generator MS SQL and click Save.





38. Expand Test Results for MS SQL folder, and then expand the Details folder. Select Response Summary. Determine if the
matches were successful or not.

39. On the MS SQL Server, verify that the database contains the data that was pushed to it. If the data is not present, check the
SQL statements or the configuration of MS SQL.

40. If multiple tests are going to be performed in the Super Flow, add a delete SQL statement to remove the items from the
database.



Load Generator: Using MySQL to add and query a database
Overview:
A new Super Flow will be created that adds content into the MySQL database. This content will then be queried to verify that it has correctly
been added into the database. The final part of the Super Flow will delete the content from the database to keep it clean without content.
This will help determine that the configuration is correct and allows addition of content, querying of the content, and deletion.

Objective:
To evaluate the ability of the MySQL server to handle the addition of new content, queries for content and the deletion of content.

Setup:



5. Select the Super Flows tab, locate BreakingPoint ClientSim MySQL (Authenticated) and click the Save As link.

6. Enter Load Generator MySQL as the name of the new Super Flow and click Ok.



7. Almost everything in this Super Flow has been configured. Changes will have to be made in the Define Actions sections
to specify the database and add some SQL statements. Select the first item, Client: Authenticate, and click the Edit the
selected actions parameters button.

8. In the Authenticate window, enter the correct Database Username and Database Password that your MySQL server is
configured to use. Click Apply Changes once completed.

9. Select the second item, Client: Conditional Request, and click the Edit the selected actions parameters button.



10. In the Conditional Request window, click the Edit the selected actions parameters button.

11. Change the SQL Statement field to an SQL statement that will update the tables in the database. For example, INSERT INTO
test.bpoint VALUES (‘Giants’, ‘Mets’). Once completed click the Apply Changes button.

12. Using the Actions drop-down menu, select Client: Query and click the Add Action button.



13. Select the newly added item and click the Edit the selected actions parameters button.

14. Enable the SQL Statement field and enter an SQL Select statement to select data from a table. For example: SELECT * FROM
test.bpoint. Click the Apply Changes button once completed.



15. From the Conditional Request window, click the Apply Changes button.

16. From the main Super Flow configuration screen, click the Save Super Flow button.





Accept.



23. Under the Information tab enter MySQL as the name and click Apply Changes.





Changes.


down menu select Load Generator MS SQL and click Apply Changes.




30. When prompted for a name to save the test as, enter Load Generator MySQL and click Save.





34. Expand Test Results for MySQL folder, then expand the Details folder. Select Response Summary. Determine if the matches
were successful or not.

35. On the MySQL Server, verify that the database contains the data that was pushed to it. If the data is not present, check the
SQL statements or the configuration of the MySQL server.



36. If multiple tests are going to be performed add in a delete SQL statement into the Super Flow to remove the items from the
database.



About BreakingPoint
BreakingPoint pioneered the first and only Cyber Tomography Machine Contact BreakingPoint
(CTM) to expose previously impossible-to-detect stress fractures within Learn more about BreakingPoint
cyber infrastructure components before they are exploited to compromise products and services by contacting a
customer data, corporate assets, brand reputation and even national security. representative in your area.
BreakingPoint products are the standard by which the world’s governments, 1.866.352.6691 U.S. Toll Free
enterprises, and service providers optimize the resiliency of their cyber www.breakingpoint.com
infrastructures. For more information, visit www.breakingpoint.com.
BreakingPoint Global Headquarters
BreakingPoint Storm CTM 3900 North Capital of Texas Highway
BreakingPoint has pioneered Cyber Tomography with the introduction of Austin, TX 78746
the BreakingPoint Storm CTM, enabling users to see for the first time the email: salesinfo@breakingpoint.com
virtual stress fractures lurking within their cyber infrastructure through the tel: 512.821.6000
simulation of crippling attacks, high-stress traffic load and millions of users. toll-free: 866.352.6691

BreakingPoint Storm CTM is a three-slot chassis that provides the equivalent BreakingPoint EMEA Sales Office
performance and simulation of racks and racks of servers, including: Paris, France
email: emea_sales@breakingpoint.com
• 40 Gigabits per second of blended stateful application traffic tel: + 33 6 08 40 43 93
• 30 million concurrent TCP sessions
BreakingPoint APAC Sales Office
• 1.5 million TCP sessions per second
Suite 2901, Building #5, Wanda Plaza
• 600,000+ complete TCP sessions per second No. 93 Jianguo Road
• 80,000+ SSL sessions per second Chaoyang District, Beijing, 100022, China
• 100+ stateful applications email: apac_sales@breakingpoint.com
• 4,500+ live security strikes tel: + 86 10 5960 3162

BreakingPoint Resources
Hardening cyber infrastructure is not easy work, but nothing that is this
important has ever been easy. Enterprises, service providers, government
agencies and equipment vendors are under pressure to establish a cyber
infrastructure that can not only repel attack but is resilient to application
sprawl and maximum load. BreakingPoint’s CTM provides the technology
and solutions that allow these organizations to create a hardened and
resilient cyber infrastructure. BreakingPoint also provides the very latest
industry resources to make this process that much easier, including Resiliency
Methodologies, How-to Guides, white papers, webcasts, and a newsletter. To
learn more, visit
www.breakingpoint.com/resources.

BreakingPoint Labs Community
Join discussions on the latest developments in hardening cyber
infrastructure. BreakingPoint Labs brings together a diverse community of
people leveraging the most current insight to harden cyber infrastructure to
withstand crippling attack and high-stress application load.
Visit www.breakingpointlabs.com.


Load Test Methodology: Server Load Testing

More Related Content

What's hot (20)

Similar to Load Test Methodology: Server Load Testing (20)

More from Ixia (19)

Recently uploaded (20)

Load Test Methodology: Server Load Testing