MEMS Packaging Reverse Technology review 2017 teardown reverse costing report published by Yole Developpement
1 like1,868 views
The document is a comprehensive MEMS packaging reverse technology review providing insights into over 100 consumer and 20 automotive MEMS components, including their structures, technologies, and manufacturing processes. It analyzes various types of sensors—environmental, inertial, optical, and RF—focusing on encapsulation methods, interconnection strategies, and manufacturer innovations. The report serves as a detailed resource for understanding MEMS packaging evolution and is accompanied by extensive comparative analyses for market actors.
![Performed by
TERMS AND CONDITIONS OF SALES
. Definitions: “Acceptance”: Action by which the Buyer accepts the terms and conditions of sale in their entirety. It is done by signing the purchase order which mentions “I hereby accept Yole’s Terms and Conditions of
Sale”.
“Buyer”: Any business user (i.e. any person acting in the course of its business activities, for its business needs) entering into the following general conditions to the exclusion of consumers acting in their personal
interests.
“Contracting Parties” or “Parties”: The Seller on the one hand and the Buyer on the other hand.
“Intellectual Property Rights” (“IPR”) means any rights held by the Seller in its Products, including any patents, trademarks, registered models, designs, copyrights, inventions, commercial secrets and know-how, technical
information, company or trading names and any other intellectual property rights or similar in any part of the world, notwithstanding the fact that they have been registered or not and including any pending registration of
one of the above mentioned rights.
“License”: For the reports and databases, 3 different licenses are proposed. The buyer has to choose one license:
• One user license: one person at the company can use the report.
• Multi-user license: the report can be used by unlimited users within the company. Subsidiaries and Joint-Ventures are not included.
• Corporate license: purchased under “Annual Subscription” program, the report can be used by unlimited users within the company. Joint-Ventures are not included.
“Products”: Depending on the purchase order, reports or database on MEMS, CSC, Optics/MOEMS, Nano, bio… to be bought either on a unit basis or as an annual subscription. (i.e. subscription for a period of 12
calendar months). The annual subscription to a package (i.e. a global discount based on the number of reports that the Buyer orders or accesses via the service, a global search service on line on I-micronews and a
consulting approach), is defined in the order. Reports are established in PowerPoint and delivered on a PDF format and the database may include Excel files.
“Seller”: Based in Lyon (France headquarters), Yole Développement is a market research and business development consultancy company, facilitating market access for advanced technology industrial projects. With
more than 20 market analysts, Yole works worldwide with the key industrial companies, R&D institutes and investors to help them understand the markets and technology trends.
1. Scope
1.1 The Contracting Parties undertake to observe the following general conditions when agreed by the Buyer and the Seller. ANY ADDITIONAL, DIFFERENT, OR CONFLICTING TERMS AND CONDITIONS IN ANY
OTHER DOCUMENTS ISSUED BY THE BUYER AT ANY TIME ARE HEREBY OBJECTED TO BY THE SELLER, SHALL BE WHOLLY INAPPLICABLE TO ANY SALE MADE HEREUNDER AND SHALL NOT BE
BINDING IN ANY WAY ON THE SELLER.
1.2 This agreement becomes valid and enforceable between the Contracting Parties after clear and non-equivocal consent by any duly authorized person representing the Buyer. For these purposes, the Buyer accepts
these conditions of sales when signing the purchase order which mentions “I hereby accept Yole’s Terms and Conditions of Sale”. This results in acceptance by the Buyer.
1.3 Orders are deemed to be accepted only upon written acceptance and confirmation by the Seller, within [7 days] from the date of order, to be sent either by email or to the Buyer’s address. In the absence of any
confirmation in writing, orders shall be deemed to have been accepted.
2. Mailing of the Products
2.1 Products are sent by email to the Buyer:
- within [1] month from the order for Products already released; or
- within a reasonable time for Products ordered prior to their effective release. In this case, the Seller shall use its best endeavours to inform the Buyer of an indicative release date and the evolution of the work in
progress.
2.2 Some weeks prior to the release date the Seller can propose a pre-release discount to the Buyer
The Seller shall by no means be responsible for any delay in respect of article 2.2 above, and including incases where a new event or access to new contradictory information would require for the analyst extra time to
compute or compare the data in order to enable the Seller to deliver a high quality Products.
2.3 The mailing of the Product will occur only upon payment by the Buyer, in accordance with the conditions contained in article 3.
2.4. The mailing is operated through electronic means either by email via the sales department or automatically online via an email/password. If the Product’s electronic delivery format is defective, the Seller undertakes to
replace it at no charge to the Buyer provided that it is informed of the defective formatting within 90 days from the date of the original download or receipt of the Product.
2.5 The person receiving the Products on behalf of the Buyer shall immediately verify the quality of the Products and their conformity to the order. Any claim for apparent defects or for non-conformity shall be sent in
writing to the Seller within 8 days of receipt of the Products. For this purpose, the Buyer agrees to produce sufficient evidence of such defects. .
2.6 No return of Products shall be accepted without prior information to the Seller, even in case of delayed delivery. Any Product returned to the Seller without providing prior information to the Seller as required under
article 2.5 shall remain at the Buyer’s risk.
3. Price, invoicing and payment
3.1 Prices are given in the orders corresponding to each Product sold on a unit basis or corresponding to annual subscriptions. They are expressed to be inclusive of all taxes. The prices may be reevaluated from time
to time. The effective price is deemed to be the one applicable at the time of the order.
3.2 Yole may offer a pre release discount for the companies willing to acquire in the future the specific report and agreeing on the fact that the report may be release later than the anticipated release date. In exchange
to this uncertainty, the company will get a discount that can vary from 15% to 10%.
3.3 Payments due by the Buyer shall be sent by cheque payable to Yole Développement, credit card or by electronic transfer to the following account:
HSBC, 1 place de la Bourse 69002 Lyon France
Bank code: 30056
Branch code: 00170
Account n°: 0170 200 1565 87
BIC or SWIFT code: CCFRFRPP
IBAN: FR76 3005 6001 7001 7020 0156 587
To ensure the payments, the Seller reserves the right to request down payments from the Buyer. In this case, the need of down payments will be mentioned on the order.
3.4 Payment is due by the Buyer to the Seller within 30 days from invoice date, except in the case of a particular written agreement. If the Buyer fails to pay within this time and fails to contact the Seller, the latter shall be
entitled to invoice interest in arrears based on the annual rate Refi of the «BCE» + 7 points, in accordance with article L. 441-6 of the French Commercial Code. Our publications (report, database, tool...) are delivered
only after reception of the payment.
3.5 In the event of termination of the contract, or of misconduct, during the contract, the Seller will have the right to invoice at the stage in progress, and to take legal action for damages.
4. Liabilities
4.1 The Buyer or any other individual or legal person acting on its behalf, being a business user buying the Products for its business activities, shall be solely responsible for choosing the Products and for the use and
interpretations he makes of the documents it purchases, of the results he obtains, and of the advice and acts it deduces thereof.
4.2 The Seller shall only be liable for (i) direct and (ii) foreseeable pecuniary loss, caused by the Products or arising from a material breach of this agreement
4.3 In no event shall the Seller be liable for:
a) damages of any kind, including without limitation, incidental or consequential damages (including, but not limited to, damages for loss of profits, business interruption and loss of programs or information) arising out of
the use of or inability to use the Seller’s website or the Products, or any information provided on the website, or in the Products;
b) any claim attributable to errors, omissions or other inaccuracies in the Product or interpretations thereof.
4.4All the information contained in the Products has been obtained from sources believed to be reliable. The Seller does not warrant the accuracy, completeness adequacy or reliability of such information, which cannot
be guaranteed to be free from errors.
4.5 All the Products that the Seller sells may, upon prior notice to the Buyer from time to time be modified by or substituted with similar Products meeting the needs of the Buyer. This modification shall not lead to the
liability of the Seller, provided that the Seller ensures the substituted Product is similar to the Product initially ordered.
4.6 In the case where, after inspection, it is acknowledged that the Products contain defects, the Seller undertakes to replace the defective products as far as the supplies allow and without indemnities or compensation of
any kind for labor costs, delays, loss caused or any other reason. The replacement is guaranteed for a maximum of two months starting from the delivery date. Any replacement is excluded for any event as set out in
article 5 below.
4.7 The deadlines that the Seller is asked to state for the mailing of the Products are given for information only and are not guaranteed. If such deadlines are not met, it shall not lead to any damages or cancellation of the
orders, except for non acceptable delays exceeding [4] months from the stated deadline, without information from the Seller. In such case only, the Buyer shall be entitled to ask for a reimbursement of its first down
payment to the exclusion of any further damages.
4.8 The Seller does not make any warranties, express or implied, including, without limitation, those of sale ability and fitness for a particular purpose, with respect to the Products. Although the Seller shall take
reasonable steps to screen Products for infection of viruses, worms, Trojan horses or other codes containing contaminating or destructive properties before making the Products available, the Seller cannot guarantee that
any Product will be free from infection.
5. Force majeure
The Seller shall not be liable for any delay in performance directly or indirectly caused by or resulting from acts of nature, fire, flood, accident, riot, war, government intervention, embargoes, strikes, labor difficulties,
equipment failure, late deliveries by suppliers or other difficulties which are beyond the control, and not the fault of the Seller.
6. Protection of the Seller’s IPR
6.1 All the IPR attached to the Products are and remain the property of the Seller and are protected under French and international copyright law and conventions.
6.2 The Buyer agreed not to disclose, copy, reproduce, redistribute, resell or publish the Product, or any part of it to any other party other than employees of its company. The Buyer shall have the right to use the
Products solely for its own internal information purposes. In particular, the Buyer shall therefore not use the Product for purposes such as:
- Information storage and retrieval systems;
- Recordings and re-transmittals over any network (including any local area network);
- Use in any timesharing, service bureau, bulletin board or similar arrangement or public display;
- Posting any Product to any other online service (including bulletin boards or the Internet);
- Licensing, leasing, selling, offering for sale or assigning the Product.
6.3 The Buyer shall be solely responsible towards the Seller of all infringements of this obligation, whether this infringement comes from its employees or any person to whom the Buyer has sent the Products and shall
personally take care of any related proceedings, and the Buyer shall bear related financial consequences in their entirety.
6.4 The Buyer shall define within its company point of contact for the needs of the contract. This person will be the recipient of each new report in PDF format. This person shall also be responsible for respect of the
copyrights and will guaranty that the Products are not disseminated out of the company.
6.5 In the context of annual subscriptions, the person of contact shall decide who within the Buyer, shall be entitled to access on line the reports on I-micronews.com. In this respect, the Seller will give the Buyer a
maximum of 10 password, unless the multiple sites organization of the Buyer requires more passwords. The Seller reserves the right to check from time to time the correct use of this password.
6.6 In the case of a multisite, multi license, only the employee of the buyer can access the report or the employee of the companies in which the buyer have 100% shares. As a matter of fact the investor of a company,
the joint venture done with a third party etc..cannot access the report and should pay a full license price.
7. Termination
7.1 If the Buyer cancels the order in whole or in part or postpones the date of mailing, the Buyer shall indemnify the Seller for the entire costs that have been incurred as at the date of notification by the Buyer of such
delay or cancellation. This may also apply for any other direct or indirect consequential loss that may be borne by the Seller, following this decision.
7.2 In the event of breach by one Party under these conditions or the order, the non-breaching Party may send a notification to the other by recorded delivery letter upon which, after a period of thirty (30) days without
solving the problem, the non-breaching Party shall be entitled to terminate all the pending orders, without being liable for any compensation.
8. Miscellaneous
All the provisions of these Terms and Conditions are for the benefit of the Seller itself, but also for its licensors, employees and agents. Each of them is entitled to assert and enforce those provisions against the Buyer.
Any notices under these Terms and Conditions shall be given in writing. They shall be effective upon receipt by the other Party.
The Seller may, from time to time, update these Terms and Conditions and the Buyer, is deemed to have accepted the latest version of these terms and conditions, provided they have been communicated to him in due
time.
9. Governing law and jurisdiction
9.1 Any dispute arising out or linked to these Terms and Conditions or to any contract (orders) entered into in application of these Terms and Conditions shall be settled by the French Commercial Courts of Lyon, which
shall have exclusive jurisdiction upon such issues.
9.2 French law shall govern the relation between the Buyer and the Seller, in accordance with these Terms and Conditions.
Distributed by](https://image.slidesharecdn.com/yolememspackagingreversetechnologyreviewsamplesp17352-171025133250/85/MEMS-Packaging-Reverse-Technology-review-2017-teardown-reverse-costing-report-published-by-Yole-Developpement-21-320.jpg)
MEMS Packaging Reverse Technology review 2017 teardown reverse costing report published by Yole Developpement
- 1. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 1 21 rue la Noue Bras de Fer 44200 NANTES - FRANCE +33 2 40 18 09 16 info@systemplus.fr www.systemplus.fr MEMS Packaging Reverse Technology Review Environmental Sensor, Inertial, Optical Sensor, Microphones & RF MEMS report by Audrey LAHRACH October 2017 – Version 1
- 2. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 2 Table of Contents Overview / Introduction 4 o Executive Summary o Analyzed Devices o Reverse Costing Methodology Technology Review 14 o Environmental Sensor o Pressure Sensors o Consumer (x5) o Automotive (4) o TPMS (x2) o Humidity Sensors o Consumer (x10) o Gas Sensors o Consumer (x4) o Combo Sensors o Consumer (x2) o Inertial Sensors o Accelerometer o Consumer (x7) o Automotive (x7) o Gyroscopes o Consumer (User Motion) (x5) o Consumer (OIS) (x2) o Automotive (x2) o Magnetometers o Consumer (x16) o Combo + Sensor Hubs o Consumer (x13) o Automotive (x6) o Optical MEMS o Microbolometers o Consumer (x3) o Micromirrors o Consumer (x2) o Industrial/ Medical (x1) o Acoustic Sensors o Microphones o Consumer (x6) o RF Components o Antenna Tuners o Consumer (x2) o RF Filters o Consumer (x5) o Oscillators o Consumer (x2) Company services 300
- 3. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 3 Overview / Introduction o Executive Summary o Analyzed Devices o MEMS Packaging Matrix o Reverse Costing Methodology Technologies Review About System Plus Executive Summary This comparative technology review has been conducted to provide insight on structure and technology for over 80 Consumer and 20 Automotive MEMS from the main suppliers (Bosch, TI, Broadcom, STMicroelectronics, Knowles…). We analyze and compare several types of device: Environmental sensors, including pressure, humidity, gas and combo sensors; Inertial devices including accelerometers, gyroscopes, magnetometers and sensor hubs; Optical MEMS including microbolometers and micromirrors; Microphones; and Radio frequency (RF) MEMS including antenna tuners, RF filters and oscillators. We look at their package dimensions and internal structures, substrate types, die numbers and dimensions and package cross-sections to answer key questions about MEMS packaging, including: - What are the main encapsulation processes used by manufacturers, single-chip wafer level packages or multi-chip molded packages? - What is the preferred interconnection method, wire bonding, flip chip, or through-silicon vias (TSVs)? - Which innovations can we observe for each manufacturer, and what differences are there between the main competitors? - Which manufacturers offer the best component integration and which one offers the maximum functionality inside one component? This 300 page report includes multiple comparisons based on physical analyses of over 100 MEMS components. It offers buyers the unique possibility of seeing MEMS package technology evolution, tracked by manufacturer.
- 4. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 4 Overview / Introduction o Executive Summary o Analyzed Devices o MEMS Packaging Matrix o Reverse Costing Methodology Technologies Review About System Plus Analyzed Devices Type Manufacturer Reference Application Pressure Infineon DPS310 Consumer Pressure STMicroelectronics LPS331AP Consumer Pressure STMicroelectronics LPS22HB Consumer Pressure Bosch BMP280 Consumer Pressure Bosch BMP380 Consumer Pressure Infineon KP200 Automotive Pressure Bosch #1 Automotive Pressure Bosch #2 Automotive Pressure Melexis MLX90809 Automotive TPMS Infineon SP37 Automotive TPMS Freescale FXTH87 Automotive • Environmental Sensors Type Manufacturer Reference Application Humidity Sensirion SHT21 Consumer Humidity Sensirion SHTC1 Consumer Humidity Sensirion SHT31 Consumer Humidity STMicroelectronics HTS221 Consumer Humidity Bosch BME680 Consumer Humidity ALPS HSHCAA006A Consumer Humidity SiLabs Si7021 Consumer Humidity SiLabs Si7034 Consumer Humidity MEAS HPP845E031R4 Consumer Humidity TI HDC1000 Consumer Gas Cambridge (ams) CCS801 Consumer Gas Ams AS-MLV-P2 Consumer Gas Sensirion SGP30 Consumer Gas Sensirion SGPC3 Consumer Gas Bosch BME680 Consumer Combo Sensor Bosch BME280 Consumer Combo Sensor Bosch BME680 Consumer
- 5. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 5 Overview / Introduction o Executive Summary o Analyzed Devices o MEMS Packaging Matrix o Reverse Costing Methodology Technologies Review About System Plus Analyzed Devices Type Manufacturer Reference Application Accelerometer mCube MC3413 Consumer mCube MC3635 Consumer mCube MC3672 Consumer Bosch Sensortec BMA280 Consumer Bosch Sensortec BMA355 Consumer STMicroelectronics LIS2DHI2 Consumer STMicroelectronics LIS302DL Consumer STMicroelectronics AISxxx Automotive Bosch SMA582 Automotive Analog Devices ADXL278 Automotive Analog Devices ADXL189 Automotive Murata SCA3100 Automotive Murata SCA2120 Automotive NXP (Freescale) MMA5248 Automotive • Inertial Sensors Type Manufacturer Reference Application Gyroscope Bosch BMG160 Consumer (User Motion) Bosch BMG250 Consumer (User Motion) STMicroelectronics L3GD20H Consumer (User Motion) NXP FXAS21002CQR 1 Consumer (User Motion) Maxim MAX210000 Consumer (User Motion) Invensense IDG-2030 Consumer (OIS) STMicroelectronics L2G2IS Consumer (OIS) Bosch SMG550 Automotive STMicroelectronics A3G4250D (Navigation) Automotive
- 6. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 6 Overview / Introduction o Executive Summary o Analyzed Devices o MEMS Packaging Matrix o Reverse Costing Methodology Technologies Review About System Plus Analyzed Devices Type Manufacturer Reference Application Magnetometer AKM AK8973 Consumer AKM AK8975 Consumer AKM AK8963 Consumer AKM AK09911 Consumer AKM AK09918C Consumer Yamaha YAS529 Consumer Yamaha YAS532B Consumer Yamaha YAS537 Consumer STMicroelectronics LIS3MDL Consumer STMicroelectronics LSM303D Consumer Bosch BMM150 Consumer ALPS BMC150 Consumer ALPS HSCDTD008A Consumer MEMSIC MMC3316xMT Consumer Honeywell HMC5883 Consumer Freescale MAG3110 Consumer • Inertial Sensors Type Manufacturer Reference Application Combo/Sensor Hub Bosch BMI160 Consumer Bosch BMF055 Consumer Bosch BMX055 Consumer Bosch iPhone 8 Consumer Bosch Apple Watch 3 Consumer STMicroelectronics LSM6DS3 Consumer STMicroelectronics LSM6DSL/M Consumer STMicroelectronics LSM9DS0 Consumer STMicroelectronics LSM9DS1 Consumer On Semi (Fairchild) FIS110 Consumer Invensense iPhone 7 (6-axis) Consumer Invensense ICM-30630 Consumer Invensense MPU-9250 Consumer Murata SCC2000 Automotive Murata SCC1300 Automotive Bosch SMI540 Automotive Bosch SMI500/510 Automotive Silicon Sensing CMS300 Automotive Bosch SMI130 (Navigation) Automotive
- 7. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 7 Overview / Introduction o Executive Summary o Analyzed Devices o MEMS Packaging Matrix o Reverse Costing Methodology Technologies Review About System Plus Analyzed Devices Type Manufacturer Reference Application Microphone Invensense ICS43432 Consumer Knowles iPhone 5S (x2) Consumer Knowles iPhone 7 (x3) Consumer Vesper VM1000 Consumer Wolfson WM7121 Consumer Wolfson WM7132 Consumer • Acoustic Sensors
- 8. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 8 Overview / Introduction o Executive Summary o Analyzed Devices o MEMS Packaging Matrix o Reverse Costing Methodology Technologies Review About System Plus Analyzed Devices Type Manufacturer Reference Application Microbolometer Ulis PICO384P Consumer Raytheon EXC001 Consumer Flir ISC1406L Consumer • Optical Sensors Type Manufacturer Reference Application Micromirror DLP TI DLP1700 Consumer Micromirror DLP TI DLP3000 Industrial/Medical Resonant Mirror STMicroelectronics PM53A Consumer
- 9. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 9 Overview / Introduction o Executive Summary o Analyzed Devices o MEMS Packaging Matrix o Reverse Costing Methodology Technologies Review About System Plus Analyzed Devices Type Manufacturer Reference Application Antenna Tuner Cavendish 32CK417R Consumer Antenna Tuner Wispry A2101 Consumer Filter Broadcom BAW Filters Consumer Filter Qorvo BAW & SAW Filters Consumer Filter Murata SAW Filters Consumer Filter Tayio Yuden SAW Filters Consumer Oscillator SiTime Si1552 Consumer Oscillator Microchip DSC6003 Consumer • RF Sensors
- 10. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 10 Overview / Introduction o Executive Summary o Analyzed Devices o MEMS Packaging Matrix o Reverse Costing Methodology Technologies Review About System Plus The analysis is conducted in 3 phases: Teardown analysis • Package is analyzed and measured Die •The dies are extracted in order to get overall data: dimensions, main blocks, pad number and pin out, die marking Comparison •Innovations we can observe for each manufacturer, and differences between the main competitors Executive Summary
- 11. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 11 TECHNOLOGIES R E V I E W
- 12. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 12 Overview / Introduction Technologies Review o Environmental Sensor o Pressure Sensor o TPMS o Humidity Sensor o Gas Sensor o Combo Sensor o Inertial Sensor o Accelerometer o Gyroscope o Magnetometer o Combo + Sensor Hub o Microbolometer o Micromirror o Microphone o RF Components o Antenna Tuner o RF Filter o Oscillators About System Plus Pressure Sensor - Technology Summary • 9 references from 4 companies of pressure sensor component manufacturer has been analyzed.
- 13. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 13 Overview / Introduction Technologies Review o Environmental Sensor o Pressure Sensor o TPMS o Humidity Sensor o Gas Sensor o Combo Sensor o Inertial Sensor o Accelerometer o Gyroscope o Magnetometer o Combo + Sensor Hub o Microbolometer o Micromirror o Microphone o RF Components o Antenna Tuner o RF Filter o Oscillators About System Plus Infineon – DPS310 – Package View & Dimensions
- 14. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 14 Overview / Introduction Technologies Review o Environmental Sensor o Pressure Sensor o TPMS o Humidity Sensor o Gas Sensor o Combo Sensor o Inertial Sensor o Accelerometer o Gyroscope o Magnetometer o Combo + Sensor Hub o Microbolometer o Micromirror o Microphone o RF Components o Antenna Tuner o RF Filter o Oscillators About System Plus Infineon – DPS310 – Package Cross-Section
- 15. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 15 Overview / Introduction Technologies Review o Environmental Sensor o Pressure Sensor o TPMS o Humidity Sensor o Gas Sensor o Combo Sensor o Inertial Sensor o Accelerometer o Gyroscope o Magnetometer o Combo + Sensor Hub o Microbolometer o Micromirror o Microphone o RF Components o Antenna Tuner o RF Filter o Oscillators About System Plus Pressure Sensor - Comparison
- 16. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 16 Overview / Introduction Technologies Review About System Plus o Company services o Related reports o Feedbacks o Contact o Legal Related Reports MARKET AND TECHNOLOGY REPORTS - YOLE DÉVELOPPEMENT MEMS & SENSORS • MEMS Packaging Market and Technology Trends 2017 • Status of the MEMS industry 2017 • Status of Advanced Packaging Industry 2017 REVERSE COSTING ANALYSES - SYSTEM PLUS CONSULTING MEMS & SENSORS
- 17. COMPLETE TEARDOWN WITH: • Detailed photos • Precise measurements • Internal packaging structures • Package cross- sections • More than 80 consumer MEMS components • More than 20 automotive MEMS components MEMS Packaging: Reverse Technology Review Title: MEMS Packaging Reverse Technology Review Pages: Over 300 Date: October 2017 Format: PDF & Excel file Price: Full report: EUR 4,990 Bundle offer: EUR 8,890 with MEMS Packaging Market and Technology Report by Yole Développement Comparative packaging analysis of over 100 inertial, environmental, acoustic, optical and radio-frequency MEMS components from major manufacturers of around 80 consumer and 20 automotive MEMS products from leading suppliers, including Bosch, Texas Instruments, Broadcom, STMicroelectronics, Knowles… Several types of device are compared: Environmental sensors, including pressure, humidity, gas and combo sensors; Inertial devices including accelerometers, gyroscopes, magnetometers and sensor hubs; Optical MEMS including microbolometers and micromirrors; Microphones; and Radio frequency (RF) MEMS including antenna tuners, RF filters and oscillators. We look at their package dimensions and internal structures, substrate types, die numbers and dimensions and package cross-sections to answer key questions about MEMS packaging, including: - What are the main encapsulation processes used by manufacturers, single-chip wafer level packages or multi-chip molded packages? - What is the preferred interconnection method, wire bonding, flip chip, or through- silicon vias (TSVs)? - Which innovations can we observe for each manufacturer, and what differences are there between the main competitors? - Which manufacturers offer the best component integration and which one offers the maximum functionality inside one component? This 300 page report includes multiple comparisons based on physical analyses of over 100 MEMS components. It offers buyers the unique possibility of seeing MEMS package technology evolution, tracked by manufacturer. MEMS device manufacturers have to choose between shrinking their products, or adding functionality. This leads to certain categories of components slowing down packaging integration and evolution. To complement Yole Développe- ment’s MEMS Packaging 2017 Market report, System Plus Consulting has conducted a comparative technology review to provide insights into the packaging structure and technology
- 18. TABLE OF CONTENTS Overview / Introduction • Executive Summary • Reverse Technology Methodology Packaging Technology Review • Environmental Sensors Pressure Sensors TPMS Humidity Sensors Gas Sensors Combo Sensors • Inertial Sensors Accelerometers Gyroscopes Magnetometers Combo and Sensor Hubs • Optical MEMS Microbolometers Micromirrors • Acoustic Sensors Microphones • RF Components Antenna Tuners RF Filters Oscillators 3D Package CoSim+ ANALYSIS PERFORMED WITH OUR COSTING TOOLS MEMS COSIM+ AND 3D PACKAGE COSIM+ System Plus Consulting offers powerful costing tools to evaluate the production cost and selling price from single chip to complex structures. MEMS CoSim+ Cost simulation tool to evaluate the cost of any MEMS process or device. 3D Package Cosim+ Cost simulation tool to evaluate the cost of any Packaging process: Wafer- level packaging, TSV, 3D integration… AUTHORS: ting in 2011 to setup its laboratory. He previously worked for 25 years at Atmel Nantes Technological Analysis Laboratory as fab support in physical analysis, and for three years at Hirex Engineering in Toulouse, in a destructive physical analysis lab. With the help of Véronique Le Troadec and Nicolas Radufe. Yvon Le Goff (Lab) Yvon has joined System Plus Consul- for ICs, LCD and OLED displays and sensor devices. She holds a master’s degree in micro- electronics from the University of Nantes. With the help of Stéphane Elisabeth and Sylvain Hallereau. Audrey Lahrach Audrey is in charge of costing analyses EXAMPLES OF MANUFACTURERS COVERED MEMS CoSim+ Performed by Distributed by
- 19. RELATED REPORTS ANNUAL SUBSCRIPTION OFFER You can choose to buy over 12 months a set of 3, 4, 5, 7, 10 or 15 Reverse Costing® reports. Up to 47% discount! • MEMS & Sensors: Accelerometer - Compass - Display / Optics - Environment - Fingerprint - Gyroscope - IMU/Combo - Light - Microphone - Oscillator - Pressure sensor • Power: GaN - IGBT - MOSFET - Si Diode - SiC • Systems: Automotive - Consumer - Energy - Medical - Telecom Each year System Plus Consulting releases a comprehensive collection of new reverse engineering & costing analyses in various domains. • Imaging: Infrared - Visible • Integrated Circuits & RF: Integrated Circuit (IC) - RF IC • LEDs: LED Lamp - UV LED - White/blue LED • Packaging: 3D Packaging - Embedded - SIP - WLP More than 60 reports released each year on the following topics (considered for 2017): MEMS Packaging Market and Technology Trends 2017 By Yole Développement InvenSense ICM-20789: High Performance 6-Axis Motion Sensor and Pressure Sensor Combo Bosch BME680 Environmental Sensor with Integrated Gas Sensor How is the evolution of MEMS devices driving packaging and test strategies? World’s first ‘7-Axis’ motion tracking device targeting drone applications. The world's 1st environmental sensor combining gas, pressure, humidity and temperature sensing functions in a 3mm x 3mm footprint package. Pages: 210+ Date: October 2017 Full report: EUR 6,490* Bundle: EUR 8,890 with the report MEMS Packaging: Reverse Technology Review Pages: 175 Date: October 2017 Full report: EUR 3,490* Pages: 152 Date: July 2017 Full report: EUR 3,490* Performed by Distributed by
- 20. ORDER FORM Please process my order for “MEMS Packaging Reverse Technology Review” Report MEMS Packaging Reverse Technology Review: EUR 4,990* Bundle Offer with MEMS Packaging Market and Technology Report 2017 by Yole Développement: EUR 8,890* Ref.: SP17352 *For price in dollars please use the day’s exchange rate. All reports are delivered electronically in pdf format. For French customer, add 20 % for VAT. Performed by DELIVERY on receipt of payment: By credit card: Number: |__|__|__|__| |__|__|__|__| |__|__|__|__| |__|__|__|__| Expiration date: |__|__|/|__|__| Card Verification Value: |__|__|__| By bank transfer: BANK INFO: HSBC, 1 place de la Bourse, F-69002 Lyon, France, Bank code : 30056, Branch code : 00170 Account No : 0170 200 1565 87, SWIFT or BIC code : CCFRFRPP, IBAN : FR76 3005 6001 7001 7020 0156 587 Return order by: • FAX: +33 (0)472 83 01 83 • MAIL: YOLE DEVELOPPEMENT, 75 Cours Emile Zola, F - 69100 Lyon - Villeurbanne Contact: • Japan: Miho - Ohtake@yole.fr • Greater China: Mavis - Wang@yole.fr • Asia: Takashi - Onozawa@yole.fr • EMEA: Lizzie - Levenez@yole.fr • North America: Steve – laferriere@yole.fr • General: info@yole.fr The present document is valid till April 15, 2018 SHIP TO PAYMENT BILLING CONTACT ABOUT YOLE DEVELOPPEMENT Distributed by Founded in 1998, Yole Développement has grown to become a group of companies providing marketing, technology and strategy consulting, media and corporate finance services. With a strong focus on emerging applications using silicon and/or micro manufacturing, the Yole Développement group has expanded to include more than 50 collaborators worldwide covering MEMS, Compound Semiconductors, LED, Image Sensors, Optoelectronics, Microfluidics & Medical, Advanced Packaging, Manufacturing, Nanomaterials, Power Electronics and Batteries & Energy Management. The “More than Moore” company Yole, along with its partners System Plus Consulting, Blumorpho and KnowMade, support industrial companies, investors and R&D organizations worldwide to help them understand markets and follow technology trends to grow their business. CUSTOM STUDIES • Market data & research, marketing analysis • Technology analysis • Reverse engineering & costing services • Strategy consulting • Patent analysis More information on www.yole.fr MEDIA • i-Micronews.com, online disruptive technologies website and its weekly e- newsletter, @Micronews • Communication & webcasts services • Events: Yole Seminars, Market Briefings More information on http://www.i-micronews.com/media-kit.html TECHNOLOGY & MARKET REPORTS • Collection of technology & market reports • Manufacturing cost simulation tools • Component reverse engineering & costing analysis • Patent investigation More information on http://www.i- micronews.com/reports.html
- 21. Performed by TERMS AND CONDITIONS OF SALES . Definitions: “Acceptance”: Action by which the Buyer accepts the terms and conditions of sale in their entirety. It is done by signing the purchase order which mentions “I hereby accept Yole’s Terms and Conditions of Sale”. “Buyer”: Any business user (i.e. any person acting in the course of its business activities, for its business needs) entering into the following general conditions to the exclusion of consumers acting in their personal interests. “Contracting Parties” or “Parties”: The Seller on the one hand and the Buyer on the other hand. “Intellectual Property Rights” (“IPR”) means any rights held by the Seller in its Products, including any patents, trademarks, registered models, designs, copyrights, inventions, commercial secrets and know-how, technical information, company or trading names and any other intellectual property rights or similar in any part of the world, notwithstanding the fact that they have been registered or not and including any pending registration of one of the above mentioned rights. “License”: For the reports and databases, 3 different licenses are proposed. The buyer has to choose one license: • One user license: one person at the company can use the report. • Multi-user license: the report can be used by unlimited users within the company. Subsidiaries and Joint-Ventures are not included. • Corporate license: purchased under “Annual Subscription” program, the report can be used by unlimited users within the company. Joint-Ventures are not included. “Products”: Depending on the purchase order, reports or database on MEMS, CSC, Optics/MOEMS, Nano, bio… to be bought either on a unit basis or as an annual subscription. (i.e. subscription for a period of 12 calendar months). The annual subscription to a package (i.e. a global discount based on the number of reports that the Buyer orders or accesses via the service, a global search service on line on I-micronews and a consulting approach), is defined in the order. Reports are established in PowerPoint and delivered on a PDF format and the database may include Excel files. “Seller”: Based in Lyon (France headquarters), Yole Développement is a market research and business development consultancy company, facilitating market access for advanced technology industrial projects. With more than 20 market analysts, Yole works worldwide with the key industrial companies, R&D institutes and investors to help them understand the markets and technology trends. 1. Scope 1.1 The Contracting Parties undertake to observe the following general conditions when agreed by the Buyer and the Seller. ANY ADDITIONAL, DIFFERENT, OR CONFLICTING TERMS AND CONDITIONS IN ANY OTHER DOCUMENTS ISSUED BY THE BUYER AT ANY TIME ARE HEREBY OBJECTED TO BY THE SELLER, SHALL BE WHOLLY INAPPLICABLE TO ANY SALE MADE HEREUNDER AND SHALL NOT BE BINDING IN ANY WAY ON THE SELLER. 1.2 This agreement becomes valid and enforceable between the Contracting Parties after clear and non-equivocal consent by any duly authorized person representing the Buyer. For these purposes, the Buyer accepts these conditions of sales when signing the purchase order which mentions “I hereby accept Yole’s Terms and Conditions of Sale”. This results in acceptance by the Buyer. 1.3 Orders are deemed to be accepted only upon written acceptance and confirmation by the Seller, within [7 days] from the date of order, to be sent either by email or to the Buyer’s address. In the absence of any confirmation in writing, orders shall be deemed to have been accepted. 2. Mailing of the Products 2.1 Products are sent by email to the Buyer: - within [1] month from the order for Products already released; or - within a reasonable time for Products ordered prior to their effective release. In this case, the Seller shall use its best endeavours to inform the Buyer of an indicative release date and the evolution of the work in progress. 2.2 Some weeks prior to the release date the Seller can propose a pre-release discount to the Buyer The Seller shall by no means be responsible for any delay in respect of article 2.2 above, and including incases where a new event or access to new contradictory information would require for the analyst extra time to compute or compare the data in order to enable the Seller to deliver a high quality Products. 2.3 The mailing of the Product will occur only upon payment by the Buyer, in accordance with the conditions contained in article 3. 2.4. The mailing is operated through electronic means either by email via the sales department or automatically online via an email/password. If the Product’s electronic delivery format is defective, the Seller undertakes to replace it at no charge to the Buyer provided that it is informed of the defective formatting within 90 days from the date of the original download or receipt of the Product. 2.5 The person receiving the Products on behalf of the Buyer shall immediately verify the quality of the Products and their conformity to the order. Any claim for apparent defects or for non-conformity shall be sent in writing to the Seller within 8 days of receipt of the Products. For this purpose, the Buyer agrees to produce sufficient evidence of such defects. . 2.6 No return of Products shall be accepted without prior information to the Seller, even in case of delayed delivery. Any Product returned to the Seller without providing prior information to the Seller as required under article 2.5 shall remain at the Buyer’s risk. 3. Price, invoicing and payment 3.1 Prices are given in the orders corresponding to each Product sold on a unit basis or corresponding to annual subscriptions. They are expressed to be inclusive of all taxes. The prices may be reevaluated from time to time. The effective price is deemed to be the one applicable at the time of the order. 3.2 Yole may offer a pre release discount for the companies willing to acquire in the future the specific report and agreeing on the fact that the report may be release later than the anticipated release date. In exchange to this uncertainty, the company will get a discount that can vary from 15% to 10%. 3.3 Payments due by the Buyer shall be sent by cheque payable to Yole Développement, credit card or by electronic transfer to the following account: HSBC, 1 place de la Bourse 69002 Lyon France Bank code: 30056 Branch code: 00170 Account n°: 0170 200 1565 87 BIC or SWIFT code: CCFRFRPP IBAN: FR76 3005 6001 7001 7020 0156 587 To ensure the payments, the Seller reserves the right to request down payments from the Buyer. In this case, the need of down payments will be mentioned on the order. 3.4 Payment is due by the Buyer to the Seller within 30 days from invoice date, except in the case of a particular written agreement. If the Buyer fails to pay within this time and fails to contact the Seller, the latter shall be entitled to invoice interest in arrears based on the annual rate Refi of the «BCE» + 7 points, in accordance with article L. 441-6 of the French Commercial Code. Our publications (report, database, tool...) are delivered only after reception of the payment. 3.5 In the event of termination of the contract, or of misconduct, during the contract, the Seller will have the right to invoice at the stage in progress, and to take legal action for damages. 4. Liabilities 4.1 The Buyer or any other individual or legal person acting on its behalf, being a business user buying the Products for its business activities, shall be solely responsible for choosing the Products and for the use and interpretations he makes of the documents it purchases, of the results he obtains, and of the advice and acts it deduces thereof. 4.2 The Seller shall only be liable for (i) direct and (ii) foreseeable pecuniary loss, caused by the Products or arising from a material breach of this agreement 4.3 In no event shall the Seller be liable for: a) damages of any kind, including without limitation, incidental or consequential damages (including, but not limited to, damages for loss of profits, business interruption and loss of programs or information) arising out of the use of or inability to use the Seller’s website or the Products, or any information provided on the website, or in the Products; b) any claim attributable to errors, omissions or other inaccuracies in the Product or interpretations thereof. 4.4All the information contained in the Products has been obtained from sources believed to be reliable. The Seller does not warrant the accuracy, completeness adequacy or reliability of such information, which cannot be guaranteed to be free from errors. 4.5 All the Products that the Seller sells may, upon prior notice to the Buyer from time to time be modified by or substituted with similar Products meeting the needs of the Buyer. This modification shall not lead to the liability of the Seller, provided that the Seller ensures the substituted Product is similar to the Product initially ordered. 4.6 In the case where, after inspection, it is acknowledged that the Products contain defects, the Seller undertakes to replace the defective products as far as the supplies allow and without indemnities or compensation of any kind for labor costs, delays, loss caused or any other reason. The replacement is guaranteed for a maximum of two months starting from the delivery date. Any replacement is excluded for any event as set out in article 5 below. 4.7 The deadlines that the Seller is asked to state for the mailing of the Products are given for information only and are not guaranteed. If such deadlines are not met, it shall not lead to any damages or cancellation of the orders, except for non acceptable delays exceeding [4] months from the stated deadline, without information from the Seller. In such case only, the Buyer shall be entitled to ask for a reimbursement of its first down payment to the exclusion of any further damages. 4.8 The Seller does not make any warranties, express or implied, including, without limitation, those of sale ability and fitness for a particular purpose, with respect to the Products. Although the Seller shall take reasonable steps to screen Products for infection of viruses, worms, Trojan horses or other codes containing contaminating or destructive properties before making the Products available, the Seller cannot guarantee that any Product will be free from infection. 5. Force majeure The Seller shall not be liable for any delay in performance directly or indirectly caused by or resulting from acts of nature, fire, flood, accident, riot, war, government intervention, embargoes, strikes, labor difficulties, equipment failure, late deliveries by suppliers or other difficulties which are beyond the control, and not the fault of the Seller. 6. Protection of the Seller’s IPR 6.1 All the IPR attached to the Products are and remain the property of the Seller and are protected under French and international copyright law and conventions. 6.2 The Buyer agreed not to disclose, copy, reproduce, redistribute, resell or publish the Product, or any part of it to any other party other than employees of its company. The Buyer shall have the right to use the Products solely for its own internal information purposes. In particular, the Buyer shall therefore not use the Product for purposes such as: - Information storage and retrieval systems; - Recordings and re-transmittals over any network (including any local area network); - Use in any timesharing, service bureau, bulletin board or similar arrangement or public display; - Posting any Product to any other online service (including bulletin boards or the Internet); - Licensing, leasing, selling, offering for sale or assigning the Product. 6.3 The Buyer shall be solely responsible towards the Seller of all infringements of this obligation, whether this infringement comes from its employees or any person to whom the Buyer has sent the Products and shall personally take care of any related proceedings, and the Buyer shall bear related financial consequences in their entirety. 6.4 The Buyer shall define within its company point of contact for the needs of the contract. This person will be the recipient of each new report in PDF format. This person shall also be responsible for respect of the copyrights and will guaranty that the Products are not disseminated out of the company. 6.5 In the context of annual subscriptions, the person of contact shall decide who within the Buyer, shall be entitled to access on line the reports on I-micronews.com. In this respect, the Seller will give the Buyer a maximum of 10 password, unless the multiple sites organization of the Buyer requires more passwords. The Seller reserves the right to check from time to time the correct use of this password. 6.6 In the case of a multisite, multi license, only the employee of the buyer can access the report or the employee of the companies in which the buyer have 100% shares. As a matter of fact the investor of a company, the joint venture done with a third party etc..cannot access the report and should pay a full license price. 7. Termination 7.1 If the Buyer cancels the order in whole or in part or postpones the date of mailing, the Buyer shall indemnify the Seller for the entire costs that have been incurred as at the date of notification by the Buyer of such delay or cancellation. This may also apply for any other direct or indirect consequential loss that may be borne by the Seller, following this decision. 7.2 In the event of breach by one Party under these conditions or the order, the non-breaching Party may send a notification to the other by recorded delivery letter upon which, after a period of thirty (30) days without solving the problem, the non-breaching Party shall be entitled to terminate all the pending orders, without being liable for any compensation. 8. Miscellaneous All the provisions of these Terms and Conditions are for the benefit of the Seller itself, but also for its licensors, employees and agents. Each of them is entitled to assert and enforce those provisions against the Buyer. Any notices under these Terms and Conditions shall be given in writing. They shall be effective upon receipt by the other Party. The Seller may, from time to time, update these Terms and Conditions and the Buyer, is deemed to have accepted the latest version of these terms and conditions, provided they have been communicated to him in due time. 9. Governing law and jurisdiction 9.1 Any dispute arising out or linked to these Terms and Conditions or to any contract (orders) entered into in application of these Terms and Conditions shall be settled by the French Commercial Courts of Lyon, which shall have exclusive jurisdiction upon such issues. 9.2 French law shall govern the relation between the Buyer and the Seller, in accordance with these Terms and Conditions. Distributed by
- 22. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 17 COMPANY SERVICES
- 23. ©2017 by System Plus Consulting | MEMS Packaging – Reverse Costing Review 18 Overview / Introduction Technologies Review About System Plus o Company services o Related reports o Feedbacks o Contact o Legal Business Models Fields of Expertise Custom Analyses (>130 analyses per year) Reports (>40 reports per year) Costing Tools Trainings