Project no.9
Download as DOCX, PDF0 likes290 views
1) The document describes the design and analysis of a commercial building using ETABS software, AutoCAD, and manual calculations according to Indian codes and standards. 2) Key aspects of the building include a flat slab design for all floors, an RCC basement and retaining walls, a parking basement, showrooms on the ground floor, and commercial and office space on upper floors. 3) Manual calculations were done to verify the results from ETABS for slabs and to cross-check the software outputs.
Project no.9
- 1. ABSTRACT About Designand Analysis of a (C+G+5)CommercialBuilding (R.C.C): The Design and Analysis of slabs, beams, columns and footings were completed using theory from Reinforced Concrete Design and Structural Analysis by ETABS software which uses limit state method conforming to Indian Standard Code of Practice. Drawings were done using AUTO-CAD. To prevent the misuse of these software applications, the Limit State Design was exclusively used as a hand calculation method to verify the output from ETABS. Manual design calculations were done to double-check the software results. In this project we design the slabs only with ETABS software; the remaining will be designed as manual. Tasks: 1. The structural design and analysis of commercial building with R.C.C frame structure in which, ALL floor slab designed as FLAT slab and basement retaining walls with R.C.C 2. Basement is planned for Parking. 3. Ground floor for Showrooms. 4. Upper frame for Commercial and Office Space. 5. The drawing and design of the structure is done on AUTO-CAD and ETABS software’s respectively. 6. Manual design calculations of slabs were done to cross-check the ETABS results. Description: The Design of Commercial Building with both software and manual interfaces helps in reducing economy in construction without reducing the strength and serviceability of the structure as a whole. The software’s used are ETABS and AUTO-CAD and manual designing in carried out by LIMIT-STATE METHOD. Ground floor which are provided with wider entrances are designed for showrooms, whereas as typical floors is designed for office use and other commercial purposes. The Basement is designed for a sufficient & comfortable parking space.