Project SYNOPSIS
- 2. GROUP MEMBERS 1. Raza Ishtiaq. (Group Leader) 2. Nikhil Nishant. 3. Nikhil Mayank. 4. Piyush Kumar. 5. Pradeep Kumar. 6. Pratit Rajak. 7. Rishav Kumar. 8. Rohit Kumar. 9. Devendra Bansal. 10.Devendra Chaurasia. Mentor: Prof. V.G. Mehendale
- 3. INTRODUCTION The current situation of power shortage in the world is nothing but grim. So, this is our small step to try to improve this situation by our project. In India alone ,there are more than 60 million vehicles on the roads everyday. The project makes use of potential energy of the vehicle passing over the speed breaker and converts it into electrical energy with the help of various gears and spring systems .
- 4. OBJECTIVES • To develop clean & green source of electricity. • To tap the potentially useful potential energy from vehicles plying on the roads. • To make an alternative for developing a unique & cheap method of producing energy.
- 5. Scope, Merits and Uses : Low Budget electricity production. Less floor area. No obstruction to traffic. Easy maintenance. Suitable at parking of multiplexes, malls, toll booths, signals, etc. Uses: Charging batteries and using them to light up the streets, etc.
- 6. Materials Required Serial No. Part Type Quantity Estimated Cost 1 Springs Helical 04 5000 2 Gears Rack & Pinion 01 1500 3 Gears 02 1000 4 Bearings Ball 04 2000 5 Motor P.M.D.C. 01 7000 6 Steel Plates - 02 1500 7 Speed Breaker Pads 02 3000 8 Support Guides 04 2000
- 7. Estimated Objective On completion of the project • We will be able to generate 72 watts of D.C. power when a single vehicle passes over the speed breaker. • This energy can be tapped and stored in a battery or a capacitor-bank , which can then be used whenever required. • Specific options on power usage include using in Vehicle-counters entering the campus , In Rooms illuminated by L.E.D.s or in RFID Sensors on vehicles.
- 8. THANK YOU