Consolidate and upgrade to save up to $172K: Dell PowerEdge R620 and Microsoft SQL Server 2014

JULY 2014
A PRINCIPLED TECHNOLOGIES TEST REPORT
Commissioned by Dell Inc.
CONSOLIDATE AND UPGRADE TO SAVE UP TO $172K:
DELL POWEREDGE R620 AND MICROSOFT SQL SERVER 2014
For every growing business, there will come a time when your infrastructure is
too outdated to keep up. You can upgrade your four-year-old servers to the maximum
memory and CPU capacity, but they will still be nearing end of life and may still not be
fast enough to keep up with your growing user base. Upgrading your hardware
infrastructure can be an expensive and challenging task, and it can be difficult to know if
you are making the right choice. You need a solution that will be space-efficient, cost-
effective, and high performing. The Dell PowerEdge R620 can provide these
characteristics, providing cost savings and providing high performance. The Dell
PowerEdge R620 is also a very space-efficient design, allowing your business to
consolidate 8U worth of legacy servers into 1U, saving your business valuable rack
space.
In the Principled Technologies labs, we tested the performance of a legacy
server running older software and of the Dell PowerEdge R620 using Microsoft Windows
Server 2012 R2 with Hyper-V and SQL Server 2014. We found that 16 VMs on the Dell
PowerEdge R620, each running Microsoft Windows Server 2012 R2 with SQL Server
2014, achieved the same or greater performance than that of four VMs on a four-year-
old dual-socket server, with each VM running Windows Server 2008 R2 and SQL Server
2008 R2.

A Principled Technologies test report 2Consolidate and upgrade to save up to $172K:
Dell PowerEdge R620 and Microsoft SQL Server 2014
We also compared the cost of both solutions. We found that replacing four of
the four-year-old servers with the Dell PowerEdge R620 could save a business $172,573
over three years.
SAVING WITH THE POWEREDGE R620: TCO COMPARISON
In addition to delivering the same performance of four four-year-old servers
using just one 1U rack server, the Dell PowerEdge R620 can save you money when you
upgrade. We found that the Dell PowerEdge R620 could save up to $172,573 over three
years compared to continuing to run four four-year-old dual-socket servers.
For our cost comparison, we calculated the total cost of ownership (TCO) of a
Dell PowerEdge R620 running Microsoft Windows Server 2012 R2 and SQL Server 2014
against four four-year-old dual-socket servers running Windows Server 2008 R2 and SQL
Server 2008 R2. The large difference in costs over three years is mainly due to the
software licensing savings achieved by the lower core count of the Dell PowerEdge R620
solution, over the higher core count of the older four-server solution.
The Dell PowerEdge R620 can save space in your datacenter. In a scenario
where the Dell PowerEdge R620 replaces four four-year-old dual-socket 2U servers, you
could save 7U of rack space and the switch and cabling costs for three servers. The
innovative design of the Dell PowerEdge R620 allows it to pack a lot of power into just
1U of space, potentially saving your business power and cooling costs.
Figure 1 compares the total three-year costs for each solution.
Figure 1: Three-year TCO
comparison for four four-year-
old dual-socket servers versus
the Dell PowerEdge R620
solution. Lower numbers are
better.
Figure 2 summarizes the projected costs for operating the two solutions over
three years. For details on how we calculated at these numbers, see Appendix D.
$130,046
$302,619
$0
$50,000
$100,000
$150,000
$200,000
$250,000
$300,000
$350,000
Dell PowerEdge R620 solution Four-year-old dual-socket server
solution
Three-year TCO

Dell PowerEdge R620
solution
Four-year-old dual-
socket server solution
Dell PowerEdge R620
solution savings
Hardware expenses
R620 hardware and support $36,657 N/A ($36,657)
Support for existing HP servers N/A $10,344 $10,344
Software expenses
SQL Server and Windows Server $87,105 $265,932 $178,827
Data center expenses
Power and cooling $1,629 $6,703 $5,074
Data center space and ports $1,155 $5,240 $4,085
Labor expenses
Deployment $800 $0 ($800)
Management $2,700 $14,400 $11,700
Total three-year TCO $130,046 $302,619 $172,573
Figure 2: Summary of three-year TCO for the Dell PowerEdge R620 solution and the four-year-old dual-socket solution.
WHAT WE TESTED
We compared the performance of two solutions running different versions of
SQL Server on these two solutions:
 Dell PowerEdge R620 with Microsoft Windows Server 2012 R2 that hosted
16 Windows Server 2012 R2 VMs each running SQL Server 2014.
 A single four-year-old dual-socket server with Windows Server 2008 R2
that hosted four Windows Server 2008 R2 VMs running SQL Server 2008 R2.
As a growing business would have likely upgraded their aging server during its
life span, we tested a four-year-old dual-socket server solution with upgrades over the
stock configuration. Our configuration of the four-year-old dual-socket server included
48 GB of memory and six-core processors. We created four VMs with 8 GB of memory
and two vCPUs each to mimic a business that would have increased its VM count and
VM configuration over time.
On the Dell PowerEdge R620, we created 16 VMs with 8 GB of memory and two
vCPUs to match the VMs created in the legacy environment. All VMs in both
environments used a 50GB VHD for the guest OS and two separate 30GB VHDs for the
SQL Server database files and log files.
To create our real-world ecommerce workload, we used the DVD Store Version
2.1 benchmarking tool. We used a 20-millisecond think time for both servers to
generate a database workload that achieved at least 15,000 orders per minute (OPM)
per VM. The DVD Store 2.1 benchmark measured database performance with a 10GB
Microsoft SQL Server 2008 R2 database on the four-year-old dual-socket server and the
same database upgraded to Microsoft SQL Server 2014 on the Dell PowerEdge R620.

For detailed configuration information of the servers, see Appendix A. See
Appendix B for detailed information on how we tested the servers and see Appendix C
for more hardware, software, and benchmark information.
WHAT WE FOUND
The Dell PowerEdge R620 supported 16 VMs running the SQL Server 2014
database workload, which was four times more than the four VMs on the four-year-old
dual-socket server. In this configuration, the R620 can consolidate four times the VMs of
the older server. Figure 3 shows the number of VMs each server supported. For OPM
results per VM, see Appendix E.
Figure 3: One Dell PowerEdge
R620 did four times the work
(16 VMs) of a single legacy
solution (4 VMs), while
maintaining the same level of
performance in each VM.
4
16
0
2
4
6
8
10
12
14
16
18
Legacy solution Dell PowerEdge R620
Number of VMs supported

IN CONCLUSION
Your growing business needs upgraded infrastructure to keep up with increased
users and demand on your hardware. Adding memory and upgrading processors does
not provide the same benefits to your infrastructure as a consolidation and upgrade
can. Upgrading and consolidating your IT infrastructure to the Dell PowerEdge R620
running Microsoft Windows Server 2012 R2 and SQL Server 2014 can improve
performance while saving money and rack space.
Based on our findings, a single Dell PowerEdge R620 can replace four four-year-
old dual-socket servers with VMs running heavy SQL Server database workloads. We
found that consolidating four older servers onto a Dell PowerEdge R620 and upgrading
to Microsoft Windows Server 2012 R2 with Hyper-V and SQL Server 2014 could save up
to $172,573 over three years, compared to keeping the four-year-old dual-socket
servers. The Dell PowerEdge R620 can also consolidate 8U worth of legacy servers into
1U of space. If your business runs older versions of Microsoft SQL Server on end-of-life
dual-socket servers, the Dell PowerEdge R620 with Microsoft Windows Server 2012 R2
with Hyper-V and SQL Server 2014 could save your company these costs while delivering
better performance than the aging hardware and software.

APPENDIX A – SYSTEM CONFIGURATION INFORMATION
Figure 4 provides detailed configuration information for the test systems.
System Dell PowerEdge R620 HP ProLiant DL380 G6
Power supplies
Total number 2 2
Vendor and model number Dell E750E-S0 HP 499249-001
Wattage of each (W) 750 460
Cooling fans
Total number 7 6
Vendor and model number Delta® GFC0412DS Nidec® V60E12BS1A7-09A032
Dimensions (h × w) of each 1-1/2″ × 1-3/4″ 76mm × 64mm
Volts 12 12
General
Number of processor packages 2 2
Number of cores per processor 8 6
Number of hardware threads per
core
2 2
System power management policy Default Performance
CPU
Vendor Intel® Intel
Name Xeon® Xeon
Model number E5-2660 X5670
Socket type FCLGA2011 FCLGA1366
Core frequency (GHz) 2.20 2.93
Bus frequency 8 6.4 GT/s
L1 cache 32 KB + 32 KB (per core) 32 KB + 32 KB (per core)
L2 cache 256 KB (per core) 256 KB (per core)
L3 cache 20 MB 12 MB
Platform
Vendor and model number Dell PowerEdge R620 HP ProLiant DL380 G6
BIOS name and version Dell 2.2.3 ProLiant P62
BIOS settings Default Performance
Memory module(s)
Total RAM in system (GB) 160 48
Vendor and model number Micron® MT36KSF1G72PZ Micron MT36JSZF51272PY
Type PC3-12800R PC3-10600R
Speed (MHz) 1,600 1,333
Speed running in the system (MHz) 1,600 1,333
Timing/Latency (tCL-tRCD-tRP-
tRASmin)
9-9-9-24 9-9-9-24
Size (GB) 8 4
Number of RAM module(s) 20 12
Chip organization Double-sided Double-sided
Rank Dual Dual

System Dell PowerEdge R620 HP ProLiant DL380 G6
Operating system
Name Microsoft Windows Server 2012 R2 Microsoft Windows Server 2008 R2
Build number 9600 7601
File system NTFS NTFS
Kernel 6.2.9600.16452 6.1.7601.18409
Language English English
RAID controller
Vendor and model number Dell PERC H710P HP Smart Array P410i
Firmware version 21.2.1-0000 2.74
Driver version 6.802.19.0 12/5/2013 6.28.0.64 2/18/2014
Cache size (MB) 1024 1024
Local storage
Vendor and model number Dell LB400M / Dell ST9900805SS
HP EH0146FARWD / Seagate
ST900205SS
Number of drives 6 (Data) / 2 (OS) 6 (Data) / 2 (OS)
Size (GB) 400 / 900 146 / 600
RPM SSD / 10k 15k / 10k
Type SAS / SAS SAS / SAS
Ethernet adapters
Vendor and model number Intel Gigabit I350 4-port HP NC382i 1GbE 2-port
Type Integrated Integrated
Driver 12.11.97.0 5/20/2014 7.10.6.0 3/11/2014
Figure 4: System configuration information for the test systems.

APPENDIX B – HOW WE TESTED
Configuring the Dell PowerEdge R620
Configuring the local storage
These steps outline how we configured the local storage in the R620. In our testing, we had two high-capacity
hard disks and six medium-capacity solid-state drives. We configured the two HDDs in a RAID1 group and installed the
host OS there. We also used the HDDs for guest OS and SQL Server Log VHDs. We configured the six SSDs in a RAID10
group and used that volume for the SQL Server Data VHDs.
1. Power on the Dell PowerEdge R620, and press Ctrl-R at the Dell PERC Configuration Utility prompt.
2. Select the storage controller, and press F2.
3. Select Create New VD, and press Enter.
4. Select the RAID type, physical disks needed, and any advanced settings. For the HDDs, we used RAID1 and left
the default cache settings. For the SSDs, we disabled the cache by selecting No Read Ahead and Write Through.
Select OK, and press Enter.
5. Press OK at the initialization warning.
6. Select the newly created VD, and press F2. Select Initialization→Start, and press Enter.
7. When the VD has finished initializing, exit the utility, and reboot the server.
Installing Microsoft Windows Server 2012 R2
These steps outline how we installed Microsoft Windows Server 2012 R2 onto the Dell PowerEdge R620 as well
as on the VMs used in testing.
1. Attach the installation media to the host or VM.
2. Power on the host or VM, and boot into the Windows installer.
3. Once the installation files have been copied into memory, select the appropriate language, time and currency
format, and keyboard layout, and click Next.
4. Click Install Now.
5. Enter the product key, and click Next.
6. Choose Windows Server 2012 R2 Datacenter (Server with a GUI), and click Next.
7. Check the I accept the license terms box, and click Next.
8. Choose Custom: Install Windows only (advanced).
9. Select the OS hard drive from the list, and click Next. This begins the installation.
10. Run Windows Update on the server until the operating system is completely up to date.
Building the virtual machines
1. Use Server Manager to add the Hyper-V role to the host.
2. Use Hyper-V Manager to create a new virtual machine with two vCPUs and 8 GB of memory. Give the OS VHD 50
GB, and place it on the HDDs.
3. Create two more VHDs with 30 GB each for data and logs. Place the Log VHD on the HDDs and the Data VHD on
the SSDs.

4. Create a virtual switch connected to the client network, and attach it to the VM.
5. Attach the OS installation media to the VM, and install the guest OS.
Installing Microsoft SQL Server 2014
These steps describe how we installed Microsoft SQL Server 2014 onto the test VMs.
1. Attach the installation media to the virtual optical drive for the VM.
2. Connect to the VM, and launch setup.exe from the installation media.
3. Choose the Installation section on the left, and click New SQL Server stand-alone installation or add features to
an existing installation.
4. At the Product Key screen, enter the product key, and click Next.
5. At the License Terms screen, check the I accept the license terms box, and click Next.
6. At the Global Rules screen, allow the Global Rules check to finish, and click Next.
7. At the Microsoft Update screen, check the use Microsoft Update to check for updates (recommended) box, and
click Next.
8. Once the updates have been downloaded and installed, click Next.
9. At the Install Setup Files screen, allow the setup files to install, and click Next.
10. At the Install Rules screen, allow the Install Rules check to run, and click Next.
11. At the Setup Role screen, select the SQL Server Feature Installation radio button, and click Next.
12. At the Feature Selection screen, select the features required for your installation. We selected Database Engine
Services, Full-Text and Semantic Extractions for Search, Client Tools Connectivity, Client Tool Backwards
Compatibility, Management Tools - Basic, and Management Tools - Complete.
13. At the Feature Rules screen, allow the Feature Rules check to run, and click Next.
14. At the Instance Configuration screen, click Next to use the default instance named MSSQLSERVER.
15. At the Server Configuration screen, click Next.
16. At the Database Engine Configuration screen, select the radio button for Mixed Mode (SQL Server
authentication and Windows authentication) and enter a password for the SQL Server system administrator (sa)
account.
17. Click Add Current User.
18. In the Data Directories tab, enter the directories to be used for SQL data and logs. We used E: and F:,
respectively, to place the data and logs on their appropriate VHDs. Click Next.
19. At the Feature Configuration Rules screen, allow the Feature Configuration Rules check to finish, and click Next.
20. At the Ready to Install screen, click Install.
21. After the installation has completed, close the wizard.
Configuring the legacy server
Installing Windows Server 2008 R2
Prior to installing Windows Server 2008 R2 on the HP ProLiant DL380 G6, we used the Smart Array configuration
utility to create a RAID1 drive pair for the operating system and used the remaining six drives in RAID10 for the VM
VHDs.

1. Insert the installation DVD for Windows Server 2008 R2 SP1 Enterprise into the DVD drive or attach the disk
image to the VM, and boot into the installation media.
2. At the Language Selection Screen, click Next.
3. Click Install Now.
4. Select Windows Server 2008 R2 Datacenter (Full Installation), and click Next.
5. Click the I accept the license terms checkbox, and click Next.
6. Click Custom.
7. Click Next.
8. At the User’s password must be changed before logging on warning screen, click OK.
9. Enter the desired password for the administrator in both fields, and click the arrow to continue.
10. At the Your password has been changed screen, click OK.
11. Connect the machine to the Internet, and install all available Windows updates. Restart as necessary.
Installing SQL Server 2008 R2
1. Attach the installation media to the VM.
2. In the VM guest operating system, run setup.exe.
3. If the installer prompts you with a .NET installation prompt, click Yes to enable the .NET Framework Core role.
4. In the left pane, click Installation.
5. Click New SQL Server stand-alone installation or add features to an existing installation.
6. At the Setup Support Rules screen, wait for the rule check to complete. If there are no failures or relevant
warnings, click OK.
7. Enter your license key, and click Next.
8. Choose to accept the license terms, and click Next.
9. If no failures are displayed after the setup support files are installed, click Next.
10. At the Setup Role screen, choose SQL Server Feature Installation.
11. At the Feature Selection screen, select Database Engine Services, Full-Text and Semantic Extractions for Search,
Client Tools Connectivity, Client Tools Backwards Compatibility, Management Tools – Basic, and Management
Tools – Complete. Click Next.
12. At the Installation Rules screen, click Next after the check completes.
13. At the Instance configuration screen, leave the default selection of default instance, and click Next.
14. At the Disk Space Requirements screen, click Next.
15. At the Server Configuration screen, check that NT AUTHORITYSYSTEM is selected for SQL Server Agent and SQL
Server Database Engine. Click Next.
16. Assuming there are no failures, click Next.
17. At the Database Engine Configuration screen, select Mixed Mode.
18. Enter and confirm a password for the system administrator account.
19. Click Add Current user. This may take several seconds.
20. Click the Data Directories tab, and enter the appropriate drive and folders for database and logs.
21. Click Next.

22. At the Error and usage reporting screen, click Next.
23. At the Installation Configuration Rules screen, check that there are no failures or relevant warnings, and click
Next.
24. At the Ready to Install screen, click Install.
25. After installation completes, click Close.
Configuring the database
We generated the data using the Install.pl script included with DVD Store version 2.1 (DS2), providing the
parameters for our 10GB database size and the database platform on which we ran (Microsoft SQL Server). We ran the
Install.pl script on a utility system running Linux. The Install.pl script generated the database schema.
After processing the data generation, we transferred the data files and schema creation files to a Windows-
based system running SQL Server. We built the 10GB database in SQL Server, and then performed a full backup, storing
the backup file on the C: drive for quick access. We used that backup file to restore the server between test runs.
The only modification we made to the schema creation scripts were the specified file sizes for our database. We
explicitly set the file sizes higher than necessary to ensure that no file-growth activity would affect the outputs of the
test. Other than this file size modification, we created and loaded the database in accordance to the DVD Store
documentation. Specifically, we followed these steps:
1. We generated the data, and created the database and file structure using database creation scripts in the DS2
download. We made size modifications specific to our 10GB database, and made the appropriate changes to
drive letters.
2. We transferred the files from our Linux data generation system to a Windows system running SQL Server.
3. We created database tables and stored procedures and objects using the provided DVD Store scripts.
4. We set the database recovery model to bulk-logged to prevent excess logging.
5. We loaded the data we generated into the database. For data loading, we used the import wizard in SQL Server
Management Studio. Where necessary, we retained options from the original scripts, such as Enable Identity
Insert.
6. We created indices, full-text catalogs, primary keys, and foreign keys using the database-creation scripts.
7. We updated statistics on each table according to database-creation scripts, which sample 18 percent of the
table data.
8. On the SQL Server instance, we created a ds2user SQL Server login using the following Transact SQL (TSQL)
script:
USE [master]
GO
CREATE LOGIN [ds2user] WITH PASSWORD=N’’,
DEFAULT_DATABASE=[master],
DEFAULT_LANGUAGE=[us_english],
CHECK_EXPIRATION=OFF,
CHECK_POLICY=OFF
GO

9. We set the database recovery model back to full.
10. We created the necessary full text index using SQL Server Management Studio.
11. We created a database user, and mapped this user to the SQL Server login.
12. We then performed a full backup of the database. This backup allowed us to restore the databases to a pristine
state relatively quickly between tests.
Running the DVD Store tests
We created a series of batch files, SQL scripts, and shell scripts to automate the complete test cycle. DVD Store
outputs an orders-per-minute metric, which is a running average calculated through the test. In this report, we report
the last OPM reported by each client/target pair.
Each complete test cycle consisted of the following general steps:
1. Clean up prior outputs from the target system and the client driver system.
2. Drop the database from the target.
3. Restore the database on the target.
4. Shut down the target.
5. Reboot the host and client system.
6. Wait for a ping response from the server under test (the hypervisor system), the client system, and the target.
7. Let the test server idle for 20 minutes.
8. Start the DVD Store driver on the client.
We used the following DVD Store parameters for testing:
ds2sqlserverdriver.exe --target=<target_IP> --ramp_rate=10 --run_time=30 --
n_threads=28 --db_size=10GB --think_time=0.02 --detailed_view=Y --
warmup_time=5 --csv_output=<drive path>

APPENDIX C – WHAT WE TESTED
About the Dell PowerEdge R620
The Dell PowerEdge R620 is a 1U, dual-socket server that packs great power into a small space. The Dell
PowerEdge R620 incorporates all of the Dell 12G technologies including the iDRAC remote management, versatile
storage capacity, operation efficiency, and outstanding I/O. With space for up to 384 GB of memory and 12.8 TB of local
storage, the Dell PowerEdge R620 can handle the workloads of much larger servers.
For more information about the Dell PowerEdge R620, visit www.dell.com/us/business/p/poweredge-r620/pd.
About the Intel Xeon processor E5 family
The new Intel Xeon processor E5 family, which comes standard in new Dell PowerEdge servers, incorporates
new technology and features to meet the computing demands of the present and future. The Intel Xeon processor E5
family delivers intelligent and adaptive performance using such features as Intel Turbo Boost Technology 2.0, Intel
Advanced Vector Extension, Intel Integrated I/O, and Intel Data Direct I/O Technology. These new processors also
feature Intel Trusted Execution Technology (Intel TXT) and utilize Intel Advance Encryption Standard New Instructions
(Intel AES-NI) to help keep your data safe.
For more information about the Intel Xeon processor E5 family, visit www.intel.com.
About Microsoft Windows Server 2012
Windows Server 2012, the latest release of this server OS from Microsoft, includes many new features and
enhancements. According to Microsoft, Windows Server 2012 focuses on four core areas:
1. Beyond virtualization. Windows Server 2012 provides a robust and dynamic virtualization platform through
Hyper-V, and includes new features that provide flexible options for delivering cloud services.
2. The power of many servers, the simplicity of one. Windows Server 2012 offers features that allow for high
availability and ease of management for multiple-server infrastructures.
3. Every app, any cloud. Windows Server 2012 delivers a scalable and flexible Web and application platform by
providing a consistent and open set of tools and frameworks that apply to applications on premises, in the
cloud, or in a hybrid environment.
4. Modern work style, enabled. Microsoft Windows Server 2012 empowers users and IT staff with remote access
to data, applications, and simpler management tools while strengthening security and compliance.
About Microsoft SQL Server 2014
This latest iteration of the Microsoft SQL Server family is a next-generation data platform that includes many
new features oriented to enterprise users focused on transactional performance and speed, time-to-insight, business
analytics, high availability, and integration of their data streams into public and private cloud environments. Microsoft
highlights the following key features:
Support for in-memory OLTP, via a memory and OLTP-optimized database engine integrated into the platform’s
data engine, and enhancements to the in-memory column store already present in Microsoft SQL 2012.
Ease of integration with Microsoft Azure, making SQL Server 2014 a platform for hybrid cloud, supporting
scenarios such as cloud backup and cloud disaster recovery.

Better redundancy with AlwaysOn Availability Groups, allowing up to eight secondary replicas to be placed in
different locations for high availability, read-access efficiency, and backup and data recovery.
For more information about Microsoft SQL Server 2014, visit www.microsoft.com/en-us/sqlserver/default.aspx.
About DVD Store Version 2.1
To create our real-world ecommerce workload, we used the DVD Store Version 2.1 benchmarking tool. DS2
models an online DVD store, where customers log in, search for movies, and make purchases. DS2 reports these actions
in orders per minute that the system could handle. The DS2 workload also performs other actions, such as adding new
customers, to exercise the wide range of database functions you would need to run your ecommerce environment.

APPENDIX D – PRICING DETAILS
To calculate the cost of consolidating with the Dell PowerEdge R620 compared to adding existing four-year-old
dual-socket servers, we used the following costs:
Hardware
We used the MSRP for a Dell PowerEdge R620 with the following upgrades:
1. Chassis with up to eight drive bays and three PCIe slots
2. Dell PERC H710P RAID controller with 1GB cache
3. Two 900GB 10K RPM SAS 6Gbps 2.5in hot-plug hard drives
4. Six 400GB SLC SSD SAS 6Gbps 2.5in hot-plug solid-state drives
5. VFlash, 8GB SD Card for iDRAC Enterprise
6. Two Intel Xeon processors E5-2660
7. 20 8GB RDIMM 1600MT/s
8. ProSupport Plus: Mission Critical 4-Hour 7x24 On-Site Service with Emergency Dispatch for 3 years
We also included post-warranty support costs over three years for the four four-year-old dual-socket servers.
Figure 5 shows the hardware costs for the configurations.
Dell PowerEdge R620
solution
Four-year-old dual-
socket server
Dell PowerEdge R620
solution savings
R620 hardware and support $36,657 N/A ($36,657)
Support for existing HP servers N/A $10,344 $10,344
Total hardware expenses $36,657 $10,344 ($26,313)
Figure 5: Summary of hardware and hardware support costs for the Dell PowerEdge R620 solution and the four-year-old dual-
socket solution.
Software
The Dell PowerEdge R620 contained 16 cores total. The legacy solution we tested had 12 cores; therefore, four
of those servers would have 48 cores. The Dell PowerEdge R620 solution and the legacy server we tested contained two
processors, so four of the legacy servers would contain eight processors. Figure 6 shows a summary of these costs.

Cost per
unit
Four older servers with two
six-core processors each
Dell PowerEdge R620 with two
eight-core processors
Number Total Number Total
Microsoft SQL Server Enterprise
Software Assurance, two-core pack
$6,874 24 $164,976 8 $54,992
Microsoft Windows Server Datacenter
Software Assurance, two-processor
pack
$3,078 4 $12,312 1 $3,078
Two-year total $177, 288 $58,070
Three-year total (1.5 * two-year total) $265,932 $87,105
Three-year savings for the Dell R620
solution
$178,827
Figure 6: Summary of software and software support costs for the Dell PowerEdge R620 solution and the four-year-old dual-
socket solution.
Data center expenses
Data center expenses can vary depending on many factors. Actual costs may be higher or lower for your
environment. We entered the server configuration information into tools provided by each vendor to estimate the
power usage of a workload with 80 percent CPU utilization. The Dell Energy Smart Solution Advisor calculated the Dell
PowerEdge R620 power usage at 348 watts. The HP Power Advisor calculated the power usage for the HP ProLiant
DL380 G6 at 358 watts. We calculated costs based on an energy cost of $.1047 per KwH.1
We estimated the cost of
cooling at .7 times the cost of power.2
Power and cooling Dell PowerEdge R620
Four-year-old dual-socket server
solution
Power usage (W) 348 1432
Power cost $319.39 $1,314.29
Power and cooling cost $542.96 $2,234.29
Three-year cost for power and
cooling $1,629.00 $6,703.00
Figure7: Summary of power and cooling costs for the Dell PowerEdge R620 solution and the four-year-old dual-socket
solution.
1
Average commercial rate for year ending April, 2014 in dollars per KwH
www.eia.gov/electricity/monthly/epm_table_grapher.cfm?t=epmt_5_3.
2
www.datacenterknowledge.com/archives/2014/06/02/survey-industry-average-data-center-pue-stays-nearly-flat-four-years/

We estimated the cost for the data center space used by each solution at $155 per U over three years. That
estimate assumed a 42U rack fills 7 square feet of data center space at a cost of $310 per year per square foot for a total
of $2,170 for the rack.3
We used this assumption to calculate the costs for the 8U used by the four-year-old dual-socket
server solution and the 1U used by the Dell PowerEdge R620 server.
We included a cost per server for data center ports based on an estimate of $24,000 to purchase a 10Gbe
networking switch and cables that support 48 connections at an average cost per connection of $500. We assumed two
data center ports per server for a one-time cost per server of $1,000.
Labor
For management costs, we estimated the time required for each and multiplied it by a flat hourly cost. Figure 8
shows a summary of these costs.
Management
Hours per
month per
server
Number
servers
Total
Annual
total
Cost per
hour
Annual cost Three-year cost
HP legacy servers 2 4 8 96 $50 $4,800 $14,400
Dell PowerEdge R620 1.5 1 1.5 18 $50 $1,800 $2,700
Savings $11,700
Figure 8: Summary of management costs for the Dell PowerEdge R620 solution and the four-year-old dual-socket solution.
Based on our experience, we estimated a deployment time of 16 hours for the Dell PowerEdge R620 at a rate of
$50 an hour and a total cost of $800.
3
www.vmware.com/go/tcocalculator/newIndex.html?numvirtualMacin=40&productEdition=vSphere+Essentials+Plus&nummacinDep
loy=40&virtualizationHost=Server+B+%28HP+DL380e+Gen8%2C+2+CPU%2C+128GB+RAM%29&networkedStorage=iSCSI+SAN&net
workedStorageComparison=iSCSI+SAN&virtualizationManagement=Virtual+Machines&costofElectricity=Average&costofRealestate=
Average&BaselinevmPerCpu=6&additionalvmPercpu=1&index_submit=See+Results

APPENDIX E – PERFORMANCE RESULTS
During our performance testing, we set a goal of achieving at least 15,000 OPM per VM in order to reflect an
even level of workload distribution and service. Figure 9 lists the OPM results for each VM on each solution.
Dell PowerEdge R620 Legacy solution
VM1 18,447 16,608
VM2 16,496 17,001
VM3 18,455 17,109
VM4 16,931 15,757
VM5 18,450 N/A
VM6 16,704 N/A
VM7 18,484 N/A
VM8 16,928 N/A
VM9 18,426 N/A
VM10 16,629 N/A
VM11 18,519 N/A
VM12 17,084 N/A
VM13 18,559 N/A
VM14 16,637 N/A
VM15 18,612 N/A
VM16 17,056 N/A
Figure 9: DVD Store 2 results for each VM in each solution. Higher numbers are better.

ABOUT PRINCIPLED TECHNOLOGIES
Principled Technologies, Inc.
1007 Slater Road, Suite 300
Durham, NC, 27703
www.principledtechnologies.com
We provide industry-leading technology assessment and fact-based
marketing services. We bring to every assignment extensive experience
with and expertise in all aspects of technology testing and analysis, from
researching new technologies, to developing new methodologies, to
testing with existing and new tools.
When the assessment is complete, we know how to present the results to
a broad range of target audiences. We provide our clients with the
materials they need, from market-focused data to use in their own
collateral to custom sales aids, such as test reports, performance
assessments, and white papers. Every document reflects the results of
our trusted independent analysis.
We provide customized services that focus on our clients’ individual
requirements. Whether the technology involves hardware, software, Web
sites, or services, we offer the experience, expertise, and tools to help our
clients assess how it will fare against its competition, its performance, its
market readiness, and its quality and reliability.
Our founders, Mark L. Van Name and Bill Catchings, have worked
together in technology assessment for over 20 years. As journalists, they
published over a thousand articles on a wide array of technology subjects.
They created and led the Ziff-Davis Benchmark Operation, which
developed such industry-standard benchmarks as Ziff Davis Media’s
Winstone and WebBench. They founded and led eTesting Labs, and after
the acquisition of that company by Lionbridge Technologies were the
head and CTO of VeriTest.
Principled Technologies is a registered trademark of Principled Technologies, Inc.
All other product names are the trademarks of their respective owners.
Disclaimer of Warranties; Limitation of Liability:
PRINCIPLED TECHNOLOGIES, INC. HAS MADE REASONABLE EFFORTS TO ENSURE THE ACCURACY AND VALIDITY OF ITS TESTING, HOWEVER,
PRINCIPLED TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTY, EXPRESSED OR IMPLIED, RELATING TO THE TEST RESULTS AND
ANALYSIS, THEIR ACCURACY, COMPLETENESS OR QUALITY, INCLUDING ANY IMPLIED WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE.
ALL PERSONS OR ENTITIES RELYING ON THE RESULTS OF ANY TESTING DO SO AT THEIR OWN RISK, AND AGREE THAT PRINCIPLED
TECHNOLOGIES, INC., ITS EMPLOYEES AND ITS SUBCONTRACTORS SHALL HAVE NO LIABILITY WHATSOEVER FROM ANY CLAIM OF LOSS OR
DAMAGE ON ACCOUNT OF ANY ALLEGED ERROR OR DEFECT IN ANY TESTING PROCEDURE OR RESULT.
IN NO EVENT SHALL PRINCIPLED TECHNOLOGIES, INC. BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH ITS TESTING, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL PRINCIPLED TECHNOLOGIES,
INC.’S LIABILITY, INCLUDING FOR DIRECT DAMAGES, EXCEED THE AMOUNTS PAID IN CONNECTION WITH PRINCIPLED TECHNOLOGIES, INC.’S
TESTING. CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES ARE AS SET FORTH HEREIN.

Consolidate and upgrade to save up to $172K: Dell PowerEdge R620 and Microsoft SQL Server 2014

More Related Content

What's hot (20)

Similar to Consolidate and upgrade to save up to $172K: Dell PowerEdge R620 and Microsoft SQL Server 2014 (20)

More from Principled Technologies (20)

Recently uploaded (20)

Consolidate and upgrade to save up to $172K: Dell PowerEdge R620 and Microsoft SQL Server 2014