RIGOL Real-time spectrum analyzer RSA5000 Series

RSA5000
Ultra-Real technology
Frequency: up to 6.5 GHz
Displayed average noise level (DANL): <-165 dBm (typical)
Phase noise: <-108 dBc/Hz (typical)
Level measurement uncertainty: <0.8 dB
6.5 GHz tracking generator
Min. RBW 1 Hz
Up to 40 MHz real-time analysis bandwidth
Multiple measurement modes
Various advanced measurement functions
Vector signal analysis measurement application (option)
EMI measurement application (option)
Vector network analyzer application
Multiple trigger modes and trigger masks
Density, spectrogram, and other display modes
PC software options
10.1'' capacitive multi-touch screen, supporting touch gestures
USB, LAN, HDMI and other communication and display interfaces
Real-time Spectrum Analyzer
Series

2
RSA5000 Series Real-time Spectrum Analyzer
Product Dimensions: Width × Height × Depth = 410 mm × 224 mm × 135 mm
The Ultra-Real technology has the following features:
Seamless analysis
◎ Seamless I/Q data acquisition in the analysis bandwidth
◎ Gap-free spectrum analysis
Based on the Ultra-Real technology, the high-speed real-time measurement mode allows you to acquire the signals in
the analysis bandwidth seamlessly and make data analysis. It also provides various display modes, such as Spectrogram,
Density, and PVT. Besides, FMT function is also available.
Built-in Linux operating system reliable and stable interface
10.1-inch capacitive
multi-touch screen
supporting touch
gestures
Support keyboard and
mouse operation RF: 9kHz to 3.2/6.5GHz
TG : 100kHz to 3.2/6.5GHz
-40 to 0dBm
Built-in quad-core
processor
high processing speed

3
RSA5000 Series Real-Time Spectrum Analyzer
FMT
Composite displays
Frequency mask trigger (FMT) to trigger the measurement by
sporadic or transient events in the spectrum
Spectrogram for gap-free display of the spectrum Density spectrum for you to visualize how frequently signals occur
Integrates five measurement modes to address the challenges for multiple RF test requirements with
one single instrument
RSA5000 series provides EMI, RTSA, VSA, and VNA modes in addition to the traditional GPSA mode. Engineers may find it convenient to
address multiple RF test challenges with just one instrument, effectively reducing their time and costs, greatly improving their working
efficiency.
Advanced measurement mode provides test items required
for the transmitter test such as multichannel power, ACP, and
occupied BW.
Quickly recall the limit line compliant with the CISPR standard
(e.g. EN55011, EN55012, etc.) to carry out pre-test and monitor
the target point with three different detectors.

4
With the Density spectrum, you can find out the exceptional
signals hidden behind the high-level signals, and capture them
accurately with the FMT.
In VNA mode, you can make S11, S21, and DTF measurements
for the components and circuit networks. The network
characteristics of the components under test can be accurately
demonstrated in Smith chart, Polar chart, and other formats.
You can freely set the way to display the measurement results,
demonstrate multiple views of the signals at one time to
obtain a clearer display effect through flexible adjustment of
the display layout.
Various operation modes to improve your
operation experience
The 10.1-inch capacitive multi-touch screen supports various
touch gestures, making it always keep up with the mainstream
development trend for screen operation. The gesture-enabled
operation such as tapping, dragging, pinching & stretching makes
the measurement action smooth and convenient, easy for you to
operate the instrument. Meanwhile, the instrument still keeps the
knob and key operation as what RIGOL traditional instruments
have, optimizing the user-friendly interactive experience to a large
extent. It also supports keyboard and mouse operation.
 Multiple interfaces to improve the connectivity
of the instruments
The instrument can be connected to a larger display/monitor via
the HDMI interface for better display effects. The Web Control
function allows you to directly control the device by accessing the
device IP address, improving the experience of remote control.

5
Specifications
Measurement Mode
All Measurement Modes
Specifications are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours
at 0℃ to 50℃ temperature, and is warmed up for 40 minutes. Unless otherwise noted, the specifications in this manual include the
measurement uncertainty.
Typical: characteristic performance, which 80 percent of the measurement results will meet at room temperature (approximately 25℃).
This data is not warranted and does not include the measurement uncertainty.
Nominal: the expected mean or average performance or a designed attribute (such as the 50 Ω connector). This data is not warranted
and is measured at room temperature (approximately 25℃).
Measured: an attribute measured during the design phase which can be compared to the expected performance, such as the amplitude
drift variation with time. This data is not warranted and is measured at room temperature (approximately 25℃).
NOTE: All charts in this manual are the measurement results of multiple instruments at room temperature unless otherwise noted. The specifications
(except the tracking generator specifications) listed in this manual are those when the tracking generator is off.
Frequency
RSA5032/-TG/N RSA5065/-TG/N
Frequency Range 9 kHz to 3.2 GHz 9 kHz to 6.5 GHz
Internal Reference Frequency
Reference Frequency 10 MHz
Accuracy
±[(time since last calibration × aging rate) + temperature stability + calibration
accuracy]
Initial Calibration
Accuracy
Standard <1 ppm
Option OCXO-C08 <0.1 ppm
Temperature
Stability
0℃ to 50℃ , with the reference 25℃
Standard <0.5 ppm
Option OCXO-C08 <0.005 ppm
Aging Rate
Standard <1 ppm/year
Option OCXO-C08 <0.03 ppm/year
Measurement Mode
General-Purpose Spectrum Analyzer (GPSA)
Real-time Spectrum Analyzer (RTSA)
Vector Signal Analysis Measurement Application (VSA)
EMI Measurement Application (EMI)
Vector Network Analyzer Application（VNA）
Measurement Mode and Product Model Adaptation Table
RSA5032 RSA5032-TG RSA5032N RSA5065 RSA5065-TG RSA5065N
GPSA √ √ √ √ √ √
RTSA √ √ √ √ √ √
VSA O O O O O O
EMI O O O O O O
VNA × × √ × × √
Tracking Generator × √ √ × √ √
Note: x indicates not supported; √ indicates standard configuration; O indicates optional configuration.
The RSA5000N models include hardware capability not in the RSA5000-TG. The RSA5000-TG models cannot be used in VNA mode.

6
GPSA Mode
Frequency
Frequency Readout Accuracy
Marker Frequency Resolution span/(number of sweep points - 1)
Marker Frequency Uncertainty
±(marker frequency readout × reference frequency accuracy + 1% × span + 10% ×
resolution bandwidth + marker frequency resolution)
Frequency Counter
Resolution 1 Hz
Uncertainty ±(marker frequency readout × reference frequency accuracy + counter resolution)
Frequency Span
Range 0 Hz, 10 Hz to maximum frequency
Resolution 2 Hz
Uncertainty ±span/(number of sweep points - 1)
SSB Phase Noise
20℃ to 30℃，fc = 500 MHz
Carrier Offset
1 kHz <-95 dBc/Hz (typical)
10 kHz <-106 dBc/Hz, <-108 dBc/Hz (typical)
100 kHz <-106 dBc/Hz, <-108 dBc/Hz (typical)
1 MHz <-115 dBc/Hz, <-117 dBc/Hz (typical)
Note: [1] When the tracking generator is enabled or in zero span mode, the available range of RBW is from 1 kHz to 10 MHz.
Measured phase noise @ 10kHz offset of RSA5032/RSA5032-TG/RSA5032N/RSA5065/
RSA5065-TG/RSA5065N
Residual FM
20℃ to 30℃ , RBW = VBW = 1 kHz
Residual FM <10 Hz (nominal)
Bandwidth
Set "Sweep Time Rule" to "Accy"
Resolution Bandwidth (-3 dB)[1] 1 Hz to 10 MHz, in 1-3-10 sequence
RBW Accuracy
3 kHz to 10 MHz, <5% (nominal)
10 Hz to 1 kHz, <15% (nominal)
Resolution Filter Shape Factor (60 dB: 3 dB) <5 (nominal)
Video Bandwidth (-3 dB) 1 Hz to 10 MHz, in 1-3-10 sequence
Resolution Bandwidth (-6 dB) 200 Hz, 9 kHz, 120 kHz, 1 MHz

7
Amplitude
Measurement Range
Range
fc ≥ 10 MHz
DANL to +30 dBm
Maximum Safe Input Level[1]
DC Voltage 50 V
CW RF Power
+30 dBm, attenuation ≥ 40 dB, preamp off.
-10 dBm, attenuation = 20 dB, preamp on.
Maximum Damage Level
CW RF Power +33 dBm (2 W)
Note: [1] When fc < 10 MHz, the maximum safe input level is decreased.
Displayed Average Noise Level (DANL)
attenuation = 0 dB, sample detector, trace averages ≥ 50, tracking generator off,
normalized to 1 Hz, 20℃ to 30℃ , input impedance = 50 Ω.
Preamp off
9 kHz to 100 kHz <-120 dBm (typical) <-120 dBm (typical)
100 kHz to 20 MHz <-135 dBm, <-140 dBm (typical) <-135 dBm, <-140 dBm (typical)
20 MHz to 1.5 GHz <-142 dBm, <-145 dBm (typical) <-142 dBm, <-145 dBm (typical)
1.5 GHz to 2.7 GHz <-140 dBm, <-143 dBm (typical) <-140 dBm, <-143 dBm (typical)
3.2 GHz to 5.5 GHz <-138 dBm, <-143 dBm (typical)
Preamp on
100 kHz to 20 MHz <-152 dBm, <-160 dBm (typical) <-152 dBm, <-160 dBm (typical)
20 MHz to 1.5 GHz <-162 dBm, <-165 dBm (typical) <-162 dBm, <-165 dBm (typical)
Measured frequency VS maximum input power
of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N
Measured frequency VS maximum input power

8
Measured Displayed Average Noise Level of RSA5032/RSA5032-TG/RSA5032N
Measured frequency response of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N
Measured frequency response of RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N
Level Display
Logarithmic Scale 1 dB to 200 dB
Linear Scale 0 to reference level
Number of Display Points 801
Number of Traces 6
Trace Detector normal, pos-peak, neg-peak, sample, RMS average, voltage average, and quasi-peak
Trace Function clear write, max hold, min hold, average, view, blank
Scale Unit dBm, dBmV, dBμV, nV, μV, mV, V, nW, μW, mW, W
Frequency Response
attenuation = 10 dB, relative to 50 MHz, 20℃ to 30℃
Preamp off
100 kHz to 3.2 GHz <0.5 dB, <0.3 dB (typical) <0.5 dB, <0.3 dB (typical)
3.2 GHz to 6.5 GHz <0.7 dB, <0.5 dB (typical)
attenuation = 0 dB, relative to 50 MHz, 20℃ to 30℃
Preamp on
100 kHz to 3.2 GHz <0.7 dB, <0.3 dB (typical) <0.7 dB, <0.3 dB (typical)
3.2 GHz to 6.5 GHz <0.9 dB, <0.5 dB (typical)
Measured Displayed Average Noise Level of RSA5065/RSA5065-TG/RSA5065N

9
Input Attenuation Switching Uncertainty
Setting Range 0 dB to 50 dB, in 1 dB step
Switching Uncertainty
fc = 50 MHz, relative to 10 dB, preamp off, 20℃ to 30℃
<0.3 dB
Absolute Amplitude Accuracy
Uncertainty
fc = 50 MHz, peak detector, preamp off, attenuation = 10 dB, input signal level = -10 dBm, 20℃
to 30℃
<0.3 dB
Reference Level
Range
Logarithmic Scale -170 dBm to +30 dBm, in 0.01 dB step
Linear Scale 707 pV to 7.07 V, 0.11% (0.01 dB) resolution
RBW Switching
Uncertainty
Set "Sweep Time Rule" to "Accy", relative to 30 kHz RBW
1 Hz to 1 MHz <0.1 dB
3 MHz, 10 MHz <0.3 dB
Preamp (Option RSA5000-PA)
Gain 20 dB (nominal)
Level Measurement Uncertainty
95% confidence level, S/N > 20 dB, RBW = VBW = 1 kHz, preamp off, attenuation = 10 dB, -50
dBm < input level ≤ 0 dBm, fc > 10 MHz, 20℃ to 30℃
Level Measurement Uncertainty <0.8 dB (nominal)
Measured level measurement uncertainty VS temperature @-10dBm of
RSA5032/RSA5032-TG/RSA5032N/RSA5065/RSA5065-TG/RSA5065N
Measured attenuation switching uncertainty of
Measured attenuation switching uncertainty VS temperature of

10
RF Input VSWR
attenuation ≥ 10 dB, preamp off
VSWR
300 kHz to 3.2 GHz <1.6 (nominal) <1.6 (nominal)
3.2 GHz to 6.5 GHz <1.8 (nominal)
Distortion
Second Harmonic Intercept (SHI)
fc ≥ 50 MHz, input signal level = -20 dBm, attenuation = 0 dB, preamp off.
+45 dBm
Third-order Intercept (TOI)
fc ≥ 50 MHz, two -20 dBm tones at input mixer spaced by 200 kHz, attenuation = 0 dB,
preamp off.
+11 dBm, +15 dBm (typical)
1 dB Gain Compression (P1dB)[1]
fc ≥ 50 MHz, attenuation = 0 dB, preamp off.
0 dBm (nominal)
Note: [1] The frequency interval of the two-tone signals should be greater than 10 MHz.
Spurious Response
Residual Response
input terminated with a 50 Ω load, attenuation = 0 dB, 20℃ to 30℃
<-90 dBm, <-100 dBm (typical)
Intermediate Frequency <-60 dBc
System-related Sideband
referenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of
first LO, referenced to harmonic of first LO
<-60 dBc
Input-related Spurious
mixer level = -30 dBm
<-60 dBc
Measured VSWR of RSA5032/RSA5032-TG/RSA5032N Measured VSWR of RSA5065/RSA5065-TG/RSA5065N

11
Sweep
Sweep
Sweep Time
span ≥ 10 Hz 1 ms to 4,000 s
zero span 1 μs to 6,000 s
Sweep Time
Uncertainty
span ≥ 10 Hz, RBW ≥ 1 kHz 5% (nominal)
zero span (sweep time > 1
ms)
5% (nominal)
Sweep Mode continue, single
Trigger
Trigger
Trigger Source free run, external 1, external 2, video
Trigger Delay
span ≥ 10 Hz 0 to 500 ms
zero span 0 to 500 ms
Tracking Generator
Tracking Generator Output
RSA5032-TG/N RSA5065-TG/N
Output Level Range -40 dBm to 0 dBm
Output Level Resolution 1 dB
Output Flatness
relative to 50 MHz
±3 dB (nominal)
@0dBm of RSA5032-TG/RSA5032N/RSA5065-TG/RSA5065N @0dBm of RSA5032-TG/RSA5032N/RSA5065-TG/RSA5065N

12
Min. Signal Duration for 100% POI at Different RBWs
Duration Time (μs)
Span RBW1 RBW2 RBW3 RBW4 RBW5 RBW6
40 MHz 26.9 16.9 11.9 9.32 8.07 7.45
25 MHz 38.9 22.9 14.9 10.9 8.82 7.82
10 MHz 86.8 46.8 26.8 16.8 11.8 9.30
1 MHz 807 407 207 107 56.3 31.3
Amplitude
Amplitude Flatness ±0.5 dB[1]
(nominal)
SFDR <-60 dBc (typical)
Density
Probability Range 0 to 100% (with a step of 0.1%)
Min. Span 5 kHz
Persistence Duration 32 ms to 10 s
Spectrogram
History Depth 8,192
Dynamic Range Covered by Bitmap
Color
200 dB
PVT
Min. Acquisition Time 187.9 μs
Max. Acquisition Time 40 s
Trigger
Trigger Source free run, external 1, external 2, power (time), FMT
FMT
Trigger Diagram density, spectrogram, normal, PVT
Trigger Resolution 0.5 dB (nominal)
Trigger Criteria enter, leave, inside, outside, enter-leave, leave-enter
Real-time Analysis Bandwidth
25 MHz
40 MHz (Option RSA5000-B40)
Min. Signal Duration for 100% POI at
the Full-Scale Accuracy
maximum span, default Kaiser window
7.45 μs
Trace Detector pos-peak, neg-peak, sample, average
Number of Traces 6
Window Type Hanning, Blackman-Harris, Rectangular, Flattop, Kaiser, and Gaussian
Resolution Bandwidth
provides 6 RBWs for each window, except the Rectangular;
for Kaiser window
Span Min. bandwidth Max. bandwidth
40 MHz 100 kHz 3.21 MHz
25 MHz 62.8 kHz 2.01 MHz
10 MHz 25.1 kHz 804 kHz
1 MHz 2.51 kHz 80.4 kHz
100 kHz 251 Hz 8.04 kHz
Max. Sample Rate 51.2 MSa/s
FFT Rate 146,484/s (norminal)
Number of Markers 8
Amplitude Resolution 0.01 dB
Frequency Point 801
Acquisition Time
Max. sample rate
>156.5 μs
RTSA Mode
Note: [1] Only applicable to the Normal measurement.

13
VSA Mode (Option RSA5000-VSA)
Capture Oversampling
Capture Oversampling 4, 8, 16
Capture Length
Capture Oversampling = 4 Maximum 4096
Sample Rate
Maximum Sample Rate
32 MHz
51.2 MHz (Option RSA5000-B40)
Symbol Rate
Symbol Rate
depends on capture oversampling
= sample rate/capture oversampling, ≥1 kHz
Usable I/Q Bandwidth
Usable I/Q Bandwidth symbol rate × capture oversampling / 1.28
Trigger Mode
Trigger Mode free run, external1, external2, power (time), FMT
Modulation Format
FSK 2FSK, 4FSK, 8FSK,
MSK including GMSK, can select differential coding or not
PSK BPSK, QPSK, OQPSK, DQPSK, π/4-DQPSK, 8PSK, D8PSK, π/8-D8PSK
QAM 16QAM, 32QAM, 64QAM
ASK 2ASK, 4ASK
Filter Type
Measurement Filter Type No Filter, RRC, Gaussian, Rectangular, User Defined
Reference Filter Type Raised Cosine, RRC, Gaussian, Rectangular, Half Sine, User Defined
Predefined standard
Cellular GSM, NADC, WCDMA, PDC, PHP (PHS)
Wireless Networking Bluetooth, WLAN (802.11b), ZigBee
Others TETRA, DECT, APCO-25
Measurement Uncertainty
Specifications apply under the following conditions:
temperature from +20 °C to +30 °C
signal level ≥ –25 dBm
properly adjusted reference level
offset between device’
s center frequency and signal’
s center frequency smaller than 5 % of
symbol rate
Random data sequence
Capture oversampling is set to 4.
Residual Error for QPSK
Test Signal
The reference filter is RRC with rolloff factor 0.22. The measurement filter is RRC with rolloff
factor 0.22. The result length is 150 symbol. The center frequency is 1 GHz.
Residual EVM RMS
Symbol Rate
100 kHz < 1.5% (nominal)
1 MHz < 2% (nominal)
Residual Error for FSK
Test Signal
The reference filter is RRC with rolloff factor 0.22. The measurement filter is RRC with rolloff
factor 0.22. The FSK reference deviation is a quarter of the symbol rate. The result length is
150 symbols. The center frequency is 1 GHz.
Residual Frequency Error RMS
Symbol Rate
100 kHz < 2% (nominal)
1 MHz < 2.5% (nominal)
EMI Mode (Option RSA5000-EMI)
EMI Resolution Bandwidth
Resolution Bandwidth (-3 dB) 100 Hz to 10 MHz, in 1-3-10 sequence
Resolution Bandwidth (-6 dB) 200 Hz, 9 kHz, 120 kHz, 1 MHz
EMI Detector
Detector pos-peak, neg-peak, average, quasi-peak, CISPR average, RMS average

14
VNA Mode
Measurement Setup
Frequency Range[1]
RSA5032N RSA5065N
100 kHz~3.2 GHz 100 kHz~6.5 GHz
Measurement Type Reflection(S11), Transmission(S21), Distance-to-fault (DTF)
Measurement Bandwidth 1 kHz~10 MHz（in 1-3-10 sequence）
Data Points 101~10001; default 201
Trace Type mem, math, clear write, average, max hold, min hold,
Number of Markers 8
Mechanical Calibration Kit Open, Short, Load, Through; User Calibration Kit
Transmission Measurement S21
Port Output Power -10 dBm (nom.)
Format Lin Mag, Log Mag, Phase, Group Delay
Magnitude Range -500 G to 500 G
Magnitude Resolution Log: 100f; Lin 1a
Dynamic Range
S21, RBW=10 kHz, Port1 level=0 dBm, Log Mag, Average=50
80 dB (nom.)
Reflection Measurement S11
Port Output Power -10 dBm (nom.)
Format
Lin Mag, Log Mag, Phase, Group Delay, SWR,
Smith Chart (Lin/Phase, Log/Phase, Real/Imag, R+j*X, G+j*B),
Polar Chart (Lin/Phase, Log/Phase, Real/Imag)
Magnitude Range -500 G to 500 G
Magnitude Resolution Log: 100f; Lin 1a
VSWR Range -500 G to 500 G
Corrected Directivity
(With CK106A)
S11, Log Mag, Average=50
＞ 40 dB (nom.)
Note: [1] In S11 measurement, the performance becomes worse when the carrier frequency is smaller than 10 MHz.
Measured return loss of RSA5000N port 1 Measured return loss of RSA5000N port 1
EMI Key Feature
Key Feature
CISPR 16-1-1 detectors
CISPR 16-1-1 bandwidths
log and linear display
signal table
scan table
simultaneous detectors
automatic limit testing
measure at marker
delta to limit
step and swept scans
report generation

15
General Specifications
Display
Type capacitive multi-touch screen
Resolution 1024 × 600 pixels
Size 10.1''
Color 24-bit color
Printer Supported
Protocol network printer
Mass Memory
Mass Memory
Internal Storage 512 MB (nominal)
External Storage USB storage device (not supplied)
Power
Input Voltage Range, AC 100 V to 240 V (nominal)
AC Frequency 45 Hz to 440 Hz
Power Consumption 55 W (typical), max. 90 W with all options
Environment
Temperature
Operating Temperature
Range
0℃ to 50℃
Storage Temperature
Range
-20℃ to 70℃
Humidity
0℃ to 30℃ ≤ 95% RH
30℃ to 40℃ ≤ 75% RH
Altitude Operating Height below 3,048 m (10,000 feet)
Electromagnetic Compatibility and Safety
EMC
complies with EMC Directive 2014/30/EU,
complies with or above the standard specified in IEC61326-1:2013/EN61326-1:2013 Group 1 Class A
CISPR 11/EN 55011
IEC 61000-4-2:2008/EN
61000-4-2
±4.0 kV (contact discharge), ±8.0 kV (air discharge)
IEC 61000-4-3:2002/EN
61000-4-3
3V/m (80 MHz to 1 GHz); 3V/m (1.4 GHz to 2 GHz); 1V/m (2.0 GHz to 2.7 GHz)
IEC 61000-4-4:2004/EN
61000-4-4
1 kV power
IEC 61000-4-5:2001/EN
61000-4-5
0.5 kV (phase-to-neutral voltage); 1 kV (phase-to-earth voltage);
1 kV (neutral-to-earth voltage)
IEC 61000-4-6:2003/EN
61000-4-6
3 V, 0.15 to 80 MHz
IEC 61000-4-11:2004/
EN 61000-4-11
voltage dip: 0% UT during half cycle; 0% UT during 1 cycle; 70% UT during 25 cycles
short interruption: 0% UT during 250 cycles
Safety
complies with IEC 61010-1:2010 (Third Edition)/EN 61010-1:2010, UL 61010-1:2012 R4.16
and CAN/CSA-C22.2 No. 61010-1-12+ GI1+ GI2
Environmental Stress
Samples of this product have been type tested in accordance with RIGOL's reliability
test regulations and verified to be robust against the environmental stresses of
storage, transportation, and end-use; those stresses include, but are not limited to,
temperature, humidity, shock, and vibration. The test methods are compliant with
standards specified in GB/T6587 Class 2 and MILPRF-28800F Class 3.
Distance to Fault（DTF）
Port Output Power 0 dBm (nom.)
Format Lin Mag, Log Mag, SWR
Maximum Distance (meters) 8.0X1010
x Velocity Factor/Span
Fault Resolution in meters 1.5x108
x Velocity Factor/Span
Windows Gaussian, Flattop, Rectangular, Hanning, Hamming
Velocity Factor 0.1~1

16
Input/Output
Front Panel Connector
RF Input
Impedance 50 Ω (nominal)
Connector N-type female
TG Output
Connector N-type female
Internal/External Reference
Internal Reference
Frequency 10 MHz
Output Level +3 dBm to +10 dBm, +7 dBm (typical)
Connector BNC female
External Reference
Frequency 10 MHz ± 5 ppm
Input Level 0 dBm to +10 dBm
External Trigger Input/Output
External Trigger Input 1
Impedance ≥ 1 kΩ (nominal)
Level 5 V TTL level
External Trigger Input 2/Trigger Output
Impedance
on trigger input ≥ 1 kΩ (nominal)
on trigger output 50 Ω (nominal)
Level 5 V TTL level
IF Output
IF Output
Frequency 430 MHz ± 20 MHz (nominal)
Amplitude
RF input power (PRFin) ≤ -10 dBm, attenuation = 0,
preamp off.
50MHz, PRFin ± 4 dB (nominal)
other frequency, PRFin ± 4 dB + RF frequency
response (nominal)
Connector SMB male
Communication Interface
USB Host (4 ports)
Connector A plug
Protocol version 2.0
USB Device
Connector B plug
Protocol version 2.0
LAN
Connector 100/1000Base, RJ-45
Protocol LXI Core 2011 Device
HDMI
Connector A plug
Protocol HDMI 1.4b
Size
(W x H x D)
410 mm × 224 mm × 135 mm
(16.14'' × 8.82'' × 5.32'')
Weight
Without Tracking Generator 4.65 kg (10.25 lb)
With Tracking Generator 4.95 kg (10.91 lb)
Calibration Interval
Recommended Calibration Interval 18 months

17
Description Order No .
Model
Real-time Spectrum Analyzer, 9 kHz to 3.2 GHz RSA5032
Real-time Spectrum Analyzer, 9 kHz to 6.5 GHz RSA5065
Real-time Spectrum Analyzer, 9 kHz to 3.2 GHz (include TG) RSA5032-TG
Real-time Spectrum Analyzer, 9 kHz to 6.5 GHz (include TG) RSA5065-TG
Real-time Spectrum Analyzer, 9 kHz to 3.2 GHz (include TG and VNA) RSA5032N
Real-time Spectrum Analyzer, 9 kHz to 6.5 GHz (include TG and VNA) RSA5065N
Standard
Accessories
Quick Guide (hard copy) -
Power Cable -
Option
Vector Signal Analysis Measurement Application RSA5000-VSA
EMI Measurement Application RSA5000-EMI
Preamplifier (PA) RSA5000-PA
High Stability Clock OCXO-C08
Real-time/Analysis Bandwidth 40 MHz RSA5000-B40
Advanced Measurement Kit RSA5000-AMK
Spectrum Analyzer PC Software Ultra Spectrum
EMI Pre-compliance Test Software
S1210 EMI Pre-compliance
Software
Optional
Accessories
High-performance Network Analysis Calibration Kit(frequency range: DC to 6.5 GHz) CK106A
Economical Network Analysis Calibration Kit(frequency range: DC to 1.5 GHz) CK106E
Include: N-SMA cable, BNC-BNC cable, N-BNC adaptor, N-SMA adaptor, 75 Ω-50 Ω adaptor,
900 MHz/1.8 GHz antenna (2pcs), 2.4 GHz antenna (2pcs)
DSA Utility Kit
Include: N(F)-N(F) adaptor (1pcs), N(M)-N(M) adaptor (1pcs), N(M)-SMA(F) adaptor (2pcs),
N(M)-BNC(F) adaptor (2pcs), SMA(F)-SMA(F) adaptor (1pcs), SMA(M)-SMA(M) adaptor (1pcs),
BNC T type adaptor (1pcs), 50 Ω SMA load (1pcs), 50 Ω BNC impedance adaptor (1pcs)
RF Adaptor Kit
Include: 50 Ω to 75 Ω adaptor (2pcs) RF CATV Kit
Include: 6 dB attenuator (1pcs), 10 dB attenuator (2pcs) RF Attenuator Kit
30 dB high-power attenuator, with the max power of 100 W ATT03301H
N(M)-N(M) RF Cable CB-NM-NM-75-L-12G
N(M)-SMA(M) RF Cable CB-NM-SMAM-75-L-12G
VSWR Bridge, 1 MHz to 3.2 GHz VB1032
VSWR Bridge, 2 GHz to 8 GHz VB1080
Near-field Probe NFP-3
Rack Mount Kit RM6041
USB Cable CB-USBA-USBB-FF-150
Three years for the mainframe.
Warranty
Order Information

DSD07100-2021-05
RIGOL®
is the trademark of RIGOL TECHNOLOGIES CO., LTD. Product information in this document subject to update without notice. For
the latest information about RIGOL's products, applications and services, please contact local RIGOL Channel Partners or access RIGOL
official website: www.rigol.com
HEADQUARTER
RIGOL TECHNOLOGIES CO., LTD.
No.8 Keling Road, New District,Suzhou,
JiangSu,P.R.China
Tel:+86-400620002
Email:info@rigol.com
EUROPE
RIGOL TECHNOLOGIES EU GmbH
Lindbergh str. 4
82178 Puchheim
Germany
Tel: +49-89/89418950
Email: info-europe@rigol.com
NORTH AMERICA
RIGOL TECHNOLOGIES, USA INC.
8140 SW Nimbus Ave.
Beaverton, OR 97008
Tel: +1-877-4-RIGOL-1
Fax: +1-877-4-RIGOL-1
Email: info@rigol.com
JAPAN
RIGOL TECHNOLOGIES JAPAN, LLC
MJ Bldg. 3F, 1-7-4 Minato, Chuou-ku,
Tokyo, Japan 104-0043
Tel: +81-3-6262-8932
Fax: +81-3-6262-8933
Email: info-japan@rigol.com

RIGOL Real-time spectrum analyzer RSA5000 Series

More Related Content

What's hot (20)

Similar to RIGOL Real-time spectrum analyzer RSA5000 Series (20)

More from NIHON DENKEI SINGAPORE (20)

Recently uploaded (20)

RIGOL Real-time spectrum analyzer RSA5000 Series