SEM 6 : PROJECT MANAGEMENT MODULE OUTLINE

BACHELOR OF SCIENCE (HONOURS) IN ARCHITECTURE
PROJECT MANAGEMENT
(MGT60403 / ARC 3612 / ARC 3614)
MODULE OUTLINE
AUGUST 2017
http://www.nationalboiler.com/project-management-services

Project Management (MGT60403//ARC 3612): Module Outline, August 2017
Semester 6
2 | P a g e
Programme Bachelor of Science (Honours) in Architecture
Module PROJECT MANAGEMENT (MGT60403)
Prerequisite None
Credit Hours 2/4
Classification Core
Instructors: Ar. Sateerah Hassan (email : Sateerah.Hassan@taylors.edu.my)
Nurul Alia Ahamad (email : NurulAlia.Ahamad@taylors.edu.my)
Emmanuel O. Canlas (email : EmmanuelO.Canlas@taylors.edu.my)
Module Synopsis
“Any Management Activity that introduces a new objective or causes change and has a definite
start and finish time is a project” – BS 6079 (2002): Project Management
This module’s aim is to develop management skills for the students in the ever growing subject called
Project Management. Informally been practiced in many aspects of work, but began to emerge as a
distinct profession in the mid- 20th century.
The module introduces students to the principle, techniques and managerial issues, which form the
process of project management. The area of study will focus in particular on project management in a
construction context but will also make considerable reference to the activity in other fields of
commercial and business activity to emphasize the broad applicability of the principle.
Project Management is an application of knowledge, skills and techniques for which to execute
projects effectively and efficiently using strategic competency for organizations, enabling them to
connect project results to business goals.
Module Teaching Objectives
The teaching objectives of the module are:
1. To appreciate the roles and functions of project participants and organizational forms.
2. To develop an awareness of the form and influence of leadership in the project process and
the relationship to a project’s success.
3. To understand the application of management techniques in the control and direction of project
resources.
4. To evaluate the dynamic changes which occur during a project’s life cycle and the nature of a
project’s success.
5. To understand the means of evaluating success and failure in a project’s performance.
Module Learning Outcomes (MLO)
The objectives of the module are translated into a number of Module Learning Outcomes (MLO),
mapped to Program Learning Outcomes (PLO) and Taylor’s Graduate Capabilities (TGC).
No. MLO PLO TGC
1 Define project characteristics, objectives, organizations and success. 4 1
2 Summarize strategies for the execution of the development process in
response to the client's objectives.
4 1
3 Explain the professional roles, duties and responsibilities of the Project
Manager, including the range and scope of the activities of a Project
Manager within the development process.
4 1
4 Compile a framework of personal qualities needed by the Project
Manager in discharging his/her duties.
4 3
SCHOOL OF ARCHITECTURE, BUILDING AND DESIGN
Centre for Modern Architecture Studies in Southeast Asia

Semester 6
3 | P a g e
Modes of Delivery
This is a 2 / 4 credit hour module conducted over a period of 14 weeks. The modes of delivery will be
in the form of lectures, tutorials, and self-directed study. The breakdown of the contact hours for the
module is as follows:
 Lecture: 2 hours per week
 Tutorial: 2 hours per week
 Self-directed study: 5 / 6 / 8 hours per week
Office Hours
You are encouraged to visit the instructor/lecturer/tutor concerned for assistance during office hours. If
the office hours do not meet your schedule, notify the instructor and set appointment times as needed.
TIMeS
TIMeS will be used as a communication tool and information portal for students to access module
materials, project briefs, assignments and announcements.
Programme Learning Outcomes (PLO)*
The Bachelor of Science (Honours) in Architecture programme has as its objectives that graduates
exemplify the following Programme Learning Outcomes (PLO) that will enable them to:
No. Programme Learning Outcomes (PLO)
1
Engage in inquiry-based learning, primarily in Architectural Design Studio, where students
learn to acquire skills to research, analyze and evaluate material which is relevant to a
particular project
2
Introductory knowledge of urban design, planning and the skills involved in the planning
process;
3
Adequate knowledge of the history and theories of architecture and related arts, technologies
and human sciences
4
Ability to create architectural designs that satisfy both aesthetics and technical requirements
and which aim to be environmentally sustainable;
5
Understanding of relationship between people and buildings and between buildings and their
environments and of the need to relate buildings and the spaces between them to human
needs and scale;
6
Understanding of the structural design, construction and engineering problems associated with
building design;
7
Adequate knowledge of physical problems and technologies and of the function of buildings
so as to provide them with internal conditions of comfort and protection against climate
8
Basic knowledge of the industries, organisations, regulations and procedures involved in
translating design concepts into buildings and integrating plans into overall planning
9 Basic knowledge of project management
10 Convey results of work effectively both orally and in writing
*Source: The Manual of Accreditation for Architecture Programmes, Board of Architects Malaysia,
2013

Semester 6
4 | P a g e
Taylor’s Graduate Capabilities (TGC)
The teaching and learning approach at Taylor’s University is focused on developing the Taylor’s
Graduate Capabilities (TGC) in its students; capabilities that encompass the knowledge, cognitive
capabilities and soft skills of its graduates.
Taylor’s Graduate Capabilities (TGC)
1. Discipline Specific Knowledge
1.1 Able to put theories into practice
1.2 Understand ethical issues in the context of the field of study
1.3 Understand professional practice within the field of study
2. Lifelong Learning
2.1 Learn independently
2.2 Locate, extract, synthesize and utilize information effectively
2.3 Be intellectual engaged
3. Thinking and Problem Solving skills
3.1 Think critically and creatively
3.2 Define and analyze problems to arrive at effective solutions
4. Communication Skills
4.1 Communicate appropriately in various settings and modes
5. Interpersonal Skills
5.1 Understand team dynamics and mobilize the power of teams
5.2 Understand and assume leadership
6. Intrapersonal Skills
6.1 Manage oneself and be self–reliant
6.2 Reflection one’s action and learning
6.3 Embody Taylor’s core values
7. Citizenship and Global Perspectives
7.1 Be aware of and form opinions from diverse perspectives
7.2 Understand the value of civic responsibility and community engagement
8. Digital Literacy
8.1 Effective use of ICT and related technology
Types of Assessments and Feedback
You will be graded in the form of formative and summative assessments. Formative assessment
involves participation in discussions and feedback sessions. Summative assessment will inform you
about the level of understanding and performance capabilities achieved at the end of the module.
No. Assessment Components Type MLO Weightage
1 Project 1 : Defining and Documenting a Project (Group) Summative 1, 2 30%
2 Mid-Term Test Summative 1-4 40%
3 Final Project Management Report (Individual) Summative 3, 4 30%
4 Taylor’s Graduate Capabilities Portfolio Summative 1-4 Pass/Fail
Total 100%

Semester 6
5 | P a g e
Assessment Components
1. Assignment 1: Defining and Documenting a Project (Group)
This project introduces students to the definition of project management by working on a simple
construction project. The students will be introduced to the roles of a project manager, client and
other stakeholders involved in a project life cycle. They will learn how to identify project objectives
and goals and strategize them to achieve a satisfactory project completion.
Students will be divided into groups to form their own organizations. They will be engaged in weekly
mock Client-Consultant Meetings (CCM) where each member will be tasked to handle their job
scope as well as learn how to organize and conduct meetings. Group performance will look into the
effectiveness of roles played by each members and the outcome of client-consultant minutes of
meeting.
Each individual needs to perform their roles progressively as evaluation will be done weekly based
on the student’s participation in the project they are in. At the end of the assignment, each group will
submit a compilation report of what they have documented through-out the initiation and execution
of the project.
2. Mid-Term Test
The Mid-Term test will seek to assess the students’ understanding on the principles, terminologies,
application of project management in general and on the implementation of project management
specific to construction projects.
3. Assignment 2: Final Project Management Report (Individual)
This project requires students to document the project management aspects of their final design
project in their respective studios. The report will reflect the students’ understanding in the
terminologies, knowledge areas, application of the tools and systems, planning whilst demonstrating
their capabilities in discharging their duties as a project manager.
This assignment will utilize the knowledge areas that are taught previously where each student will
be asked to demonstrate their leadership qualities in managing their projects based on the discipline
of project management.
4. Taylor’s Graduate Capabilities Portfolio
The Taylor’s Graduate Capabilities (TGC) Portfolio is a document that collates all assessments
produced in a module and reflects a student’s acquisition of the Module Learning Outcomes and
Taylor’s Graduate Capabilities.
 For students enrolled in the 2011 Program Structure
The TGC portfolio is an edited A3-size bound document that includes all the assessments
produced in the module. Visual diary and process of work (packaged) are to be included as part
of the portfolio submission. Students must reflect on their learning through the TGC Portfolio
Form.
 For students enrolled in the 2012 Program Structure onwards
Each student is to develop an e-Portfolio, a web-based portfolio in the form of a personal
academic blog. The e-Portfolio is developed progressively for all modules taken throughout
Semesters 1 to 5 and culminates with a final Portfolio in printed form produced in the final
semester. The printed Portfolio must encapsulate the acquisition of Programme Learning
Outcomes and Taylor’s Graduate Capabilities, and showcases the distinctiveness and identity of
the student as a graduate of the programme.

Semester 6
6 | P a g e
Marks and Grading Table
Assessments and grades will be returned within two weeks of your submission. You will be given grades
and necessary feedback for each submission. The grading system is shown below:
Grade Marks
Grade
Points
Definition Description
A 80 – 100 4.00 Excellent
Evidence of original thinking; demonstrated outstanding
capacity to analyze and synthesize; outstanding grasp of
module matter; evidence of extensive knowledge base.
A- 75 – 79 3.67 Very Good
Evidence of good grasp of module matter; critical capacity
and analytical ability; understanding of relevant issues;
evidence of familiarity with the literature.
B+ 70 – 74 3.33
Good
Evidence of grasp of module matter; critical capacity and
analytical ability, reasonable understanding of relevant
issues; evidence of familiarity with the literature.B 65 – 69 3.00
B- 60 – 64 2.67
Pass
Evidence of some understanding of the module matter;
ability to develop solutions to simple problems; benefitting
from his/her university experience.
C+ 55 – 59 2.33
C 50 – 54 2.00
D+ 47 – 49 1.67
Marginal Fail
Evidence of nearly but not quite acceptable familiarity with
module matter, weak in critical and analytical skills.
D 44 – 46 1.33
D- 40 – 43 1.00
F 0 – 39 0.00 Fail
Insufficient evidence of understanding of the module matter;
weakness in critical and analytical skills; limited or irrelevant
use of the literature.
WD - - Withdrawn
Withdrawn from a module before census date, typically mid-
semester [refer to Description 1 below].
F(W) 0 0.00 Fail
Withdrawn after census date, typically mid-semester [refer
to Description 2 below].
IN - - Incomplete
An interim notation given for a module where a student has
not completed certain requirements with valid reason or it is
not possible to finalise the grade by the published deadline.
P - - Pass Given for satisfactory completion of practicum.
AU - - Audit
Given for a module where attendance is for information only
without earning academic credit.
Description 1: Week 3 to week 7 (inclusive) for long semester, or week 3 to week 5 (inclusive) for short
semester. A short semester is less than 14 weeks. Not applicable for audit and internship.
Description 2: After week 7 for long semester, or after week 5 for short semester. A short semester is
less than 14 weeks. Not applicable for audit and internship.
Coursework Assessments and Final Examination
Any student who fails to attempt all assessment components worth 20% or more, including final exam
and final presentation, will result in failing the module irrespective of the marks earned, even though
he/she has achieved 50% or more in the overall assessment. Students will not be allowed to re-sit the
examination or resubmit an assessment.

Semester 6
7 | P a g e
Module Schedule
Date/Week
(2016)
Lecture/Presentation Discussion/Tutorial
Self-directed
Study
Hours Hours Hours
30 August
Lecture 1:
- Introduction to Project Management
- What is a Project?
- What is Project Management?
- Project Life Cycle
Project 1 (Group)
- Briefing
- Site visit
Briefing of Module Info. retrieval
Week 1 2 2 4
6 September
(Last Friday of
the week to
add/drop a
module)
Lecture 2:
- Project Management Process
(Plan, Execution, Controlling, Closing)
- Knowledge & Skills
- Communication
- Success Criteria
Project 1
CCM - FORMING
Info retrieval
Week 2 2 2 4
13 September
Lecture 3:
- Role of Project Manager
- Role and Responsibilities of the
Project Team (Project Manager,
Architect, Engineers, QS, other
consultants)
- Role of Architect in Project
Management
Project 1
CCM - STORMING Info retrieval
Week 3 2 2 4
20 September
Lecture 4:
- Elements of Effective Project
Management
- Leadership in Projects
- Teamwork
- Organizational types
Project 1
CCM - STORMING
Info retrieval
Week 4 2 2 4
27 September
Lecture 5:
- Project Success or Failure
- Project Planning/ Scheduling
- Project Management Tools
(Work Breakdown Structure (WBS),
Gantt Charts, Critical Paths, Float)
Project 1
CCM - NORMING
Info Retrieval
Week 5 2 2 2
4 October
Lecture 6:
- Project Procurements
- Resource Planning
- Cost Control
Project 1
CCM -
PERFORMING
Info Retrieval
Week 6 2 2 4
11 October
(Last Friday of
the week for
module
withdrawal
with WD
grade)
Submission of Project 1
(Group Presentation + submission of
report)
Project 1
CCM -
ADJOURNING
Info Retrieval
Week 7 2 2 4
16-20 October SEMESTER BREAK

Semester 6
8 | P a g e
Date/Week
Lecture/Presentation Discussion/Tutorial
Self-directed
Study
Hours Hours Hours
25 October
Lecture 7:
- Risk Management
- Maintenance Strategy
Project 2 Briefing
Project 2 Info Retrieval
Week 8 2 2 4
1 November
Lecture 8:
- Change Management
- Negotiations
- Conflict Management
Project 2 Info Retrieval
Week 9 2 2 4
8 November MID TERM TEST – Written test Exam Exam
Week 10 2 - -
15 November
(Last Friday of
the week for
subject module
withdrawal with
F(W) grade)
Tutorials – Final Report Project 2 Info Retrieval
Week 11 2 2 4
22 November Tutorials – Final Report Project 2 Info Retrieval
Week 12 2 2 4
29 November Submission of Final Report Submission -
Week 13 - - -
6 December e-Portfolio - TGC Portfolio
Week 14 - - -
**Note: The Module Schedule above is subject to change at short notice
References
Main References:
1. Harris, Frank & Mccaffer, Ronald, “Modern Construction Management”, Blackwell Science.
2. J. Bennet, “International Construction Project Management: General Theory and Practice”,
Butterworths-Heinemann.
3. L. Andrew, “Project Management in Malaysia”, Synergy Books International, 1996.
Secondary References
1. C., Hendrickson & T., Au, “Project Management for Construction”, Prentice-Hall, 1986.
2. D., Burstein & F., Stasiowski, “Project Management for Design Professional”, Whitney Library
of Design.
3. D. I. Cleland, “Project Management: Strategic Design and Implementation”, McGraw-Hill, 1991.
4. D. W. J., Day, “Project Management and Control”, MacMilan, 1994.
5. R.H., Clough & G.A., Sears, “Construction Project Management”, John Wiley & Sons, 1991
6. W. B., Foxfall, “Professional Construction Management and Project Administration
Architectural”, Record Books & AIA.
General Rules and Regulations

Semester 6
9 | P a g e
Late Submission Penalty
The School imposes a late submission penalty for work submitted late without a valid reason e.g. a
medical certificate. Any work submitted after the deadline (which may have been extended) shall have
the percentage grade assigned to the work on face value reduced by 10% for the first day and 5% for
each subsequent day late. A weekend counts as one (1) day.
Individual members of staff shall be permitted to grant extensions for assessed work that they have set
if they are satisfied that a student has given good reasons.
Absenteeism at intermediate or final presentation will result in zero mark for that presentation.
The Board of Examiners may over-rule any penalty imposed and allow the actual mark achieved to be
used if the late submission was for a good reason.
Attendance, Participation and Submission of Assessment Components
Attendance is compulsory. Any student who arrives late after the first half-hour of class will be
considered as absent. The lectures and tutorials will assist you in expanding your ideas and your
assessments. A minimum of 80% attendance is required to pass the module and/or be eligible for the
final examination and/or presentation.
Students will be assessed based on their performance throughout the semester. Students are expected
to attend and participate actively in class. Class participation is an important component of every
module.
Students must attempt all assessment components. Failure to attempt assessment components worth
20% or more, including final exam and final presentation, will result in failing the module irrespective of
the marks earned, even though the student has achieved more than 50% in the overall assessment.
Plagiarism (Excerpt from Taylor’s University Student Handbook 2013, page 59)
Plagiarism, which is an attempt to present another person’s work as your own by not acknowledging
the source, is a serious case of misconduct which is deemed unacceptable by the University.
"Work" includes written materials such as books, journals and magazine articles or other papers and
also includes films and computer programs. The two most common types of plagiarism are from
published materials and other students’ works.
1. Published Materials
In general, whenever anything from someone else’s work is used, whether it is an idea, an opinion
or the results of a study or review, a standard system of referencing should be used. Examples of
plagiarism may include a sentence or two, or a table or a diagram from a book or an article used
without acknowledgement.
Serious cases of plagiarism can be seen in cases where the entire paper presented by the student
is copied from another book, with an addition of only a sentence or two by the student.
While the former can be treated as a simple failure to cite references, the latter is likely to be viewed
as cheating in an examination.
Though most assignments require the need for reference to other peoples’ works, in order to avoid
plagiarism, students should keep a detailed record of the sources of ideas and findings and ensure
that these sources are clearly quoted in their assignment. Note that plagiarism also refers to
materials obtained from the Internet too.

Semester 6
10 | P a g e
2. Other Students’ Work
Circulating relevant articles and discussing ideas before writing an assignment is a common
practice. However, with the exception of group assignments, students should write their own papers.
Plagiarising the work of other students into assignments includes using identical or very similar
sentences, paragraphs or sections. When two students submit papers that are very similar in tone
and content, both are likely to be penalised.
Student Participation
Your participation in the module is encouraged. You have the opportunity to participate in the following
ways:
 Your ideas and questions are welcomed, valued and encouraged.
 Your input is sought to understand your perspectives, ideas and needs in planning subject
revision.
 You have opportunities to give feedback and issues will be addressed in response to that
feedback.
 Do reflect on your performance in Portfolios.
 Student evaluation on your views and experiences about the module are actively sought and
used as an integral part of improvement in teaching and continuous improvement.
Student-centered Learning (SCL)
The module uses the Student-centered Learning (SCL) approach. Utilization of SCL embodies most of
the principles known to improve learning and to encourage student’s participation. SCL requires
students to be active, responsible participants in their own learning and instructors are to facilitate the
learning process. Various teaching and learning strategies such as experiential learning, problem-
based learning, site visits, group discussions, presentations, working in group and etc. can be employed
to facilitate the learning process. In SCL, students are expected to be:
 active in their own learning;
 self-directed to be responsible to enhance their learning abilities;
 able to cultivate skills that are useful in today’s workplace;
 active knowledge seekers;
 active players in a team.
Prepared by: Checked by: Approved by:
……………………………. ……………………………. …………………………….
(Ar. Hjh. Sateerah Hj. Hassan) (Ar. Zahari Zubir) (Mohd. Adib Ramli)
Module Coordinator Stream Coordinator Programme Director
DL: 035625352 Professional Studies B. Sc. Architecture (Hons)
Office: Academic Suite C9
Date: Date: Date:
Remarks:
1. The Module Outline is to be distributed to the students in the first week of the semester.
2. Any changes to the Module Outline shall be communicated (in writing) to the Programme Director
and the approved revised version must be communicated to the students

SEM 6 : PROJECT MANAGEMENT MODULE OUTLINE

More Related Content

What's hot (10)

Similar to SEM 6 : PROJECT MANAGEMENT MODULE OUTLINE (20)

More from Darshiini Vig (20)

Recently uploaded (20)

SEM 6 : PROJECT MANAGEMENT MODULE OUTLINE