unit 213 ppt 4
- 1. Level 2 Diploma in Bench Joinery © 2013 City and Guilds of London Institute. All rights reserved. 1 of 10 PowerPointpresentation Presentation 4 Unit 213: Mark out from setting out details for bench joinery products
- 2. Level 2 Diploma in Bench Joinery © 2013 City and Guilds of London Institute. All rights reserved. 2 of 10 Learning outcomes • Carry out risk assessment for marking out bench joinery products. • Follow current environmental and relevant health and safety regulations relating to marking out for bench joinery products.
- 3. Level 2 Diploma in Bench Joinery © 2013 City and Guilds of London Institute. All rights reserved. 3 of 10 Health and safety regulations Do you know what the following stand for and what they mean in terms of your work as a bench joiner? HASAWA EPA COSHH BAR PUWER EWR 1989 RIDDOR TCT PAT TP1 HSE HSS MHor 1997 WAHR 2005 CDM LABC LAPD
- 4. Level 2 Diploma in Bench Joinery © 2013 City and Guilds of London Institute. All rights reserved. 4 of 10 Health and safety regulations continued HASAWA Health and Safety at Work Act 1974 COSHH Control of Substances Hazardous to Health PUWER Provision and Use of Work Equipment Regulations 1998 RIDDOR Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 1995 PAT Portable appliance test HSE Health and Safety Executive MHOR 1997 Manual Handling Operations 1997 CDM 2007 Construction Design Management Regulations 2007 WAHR 2005 Working at Height Regulations 2005 LABC Local Authority Building Control LAPD Local Authority Planning Department
- 5. Level 2 Diploma in Bench Joinery © 2013 City and Guilds of London Institute. All rights reserved. 5 of 10 Health and safety regulations continued EPA Environmental Protection Agency BAR British Adhesives Regulations EWR 1989 Electricity at Work Regulations 1989 TCT Tungsten carbide tipped TPI Teeth per inch HSS High-speed steel
- 6. Level 2 Diploma in Bench Joinery © 2013 City and Guilds of London Institute. All rights reserved. 6 of 10 PAT Which items are covered by PAT? • All electrical items that are used or are in the workplace, including mobile phone chargers. Where would you find confirmation of the PAT having taken place? • On a label signed, dated and stuck on the electrical item. How often does the PAT take place? • Once a year by a qualified electrician.
- 7. Level 2 Diploma in Bench Joinery © 2013 City and Guilds of London Institute. All rights reserved. 7 of 10 Accidents How many days off work must a worker have following an accident on site before the Health and Safety Executive has to be notified? • Three days.
- 8. Level 2 Diploma in Bench Joinery © 2013 City and Guilds of London Institute. All rights reserved. 8 of 10 Working at height At which height must a protective handrail be provided around a working platform? • At any height at which there is a possibility of falling. This could mean as low as a few inches off the ground.
- 9. Level 2 Diploma in Bench Joinery © 2013 City and Guilds of London Institute. All rights reserved. 9 of 10 Whose responsibility is site safety? Every body that works on the site. Discussion to follow on the roles and responsibilities of the employer and employee.
- 10. Level 2 Diploma in Bench Joinery © 2013 City and Guilds of London Institute. All rights reserved. 10 of 10 Any questions?