unit 213 ppt 2
- 1. © 2013 City and Guilds of London Institute. All rights reserved. 1 of 15 Level 2 Diploma in Bench Joinery PowerPointpresentation Presentation 2 Unit 213: Mark out from setting out details for bench joinery products
- 2. © 2013 City and Guilds of London Institute. All rights reserved. 2 of 15 Level 2 Diploma in Bench Joinery Learning outcomes • Identify tools required for marking out for bench joinery products. • State the purpose of using face side and face edge marks. • State how joints and sections are marked out on timber components. • Select and use tools required for marking out for bench joinery products. • Select face side and face edge. • Mark out bench joinery products.
- 3. © 2013 City and Guilds of London Institute. All rights reserved. 3 of 15 Level 2 Diploma in Bench Joinery Tutor guidance Following is all about naming parts of a bench joinery product and naming tools required for marking out. The drawing is the same but each slide is dedicated to small sections of the whole. Discuss each slide in depth as each answer is revealed.
- 4. © 2013 City and Guilds of London Institute. All rights reserved. 4 of 15 Level 2 Diploma in Bench Joinery On the following slide is a picture of a small garden gate, can you identify: • face side and edge marks • width measurement • height measurement • thickness measurement • end grain • diagonal brace • dovetail • half lap • tee bridal joint • the horns • stiles • rails • centre brace
- 5. © 2013 City and Guilds of London Institute. All rights reserved. 5 of 15 Level 2 Diploma in Bench Joinery Face side and edge marks Face side and edge marks
- 6. © 2013 City and Guilds of London Institute. All rights reserved. 6 of 15 Level 2 Diploma in Bench Joinery Width Height Thickness Core measurements
- 7. © 2013 City and Guilds of London Institute. All rights reserved. 7 of 15 Level 2 Diploma in Bench Joinery End grain Diagonal brace End grain and diagonal brace
- 8. © 2013 City and Guilds of London Institute. All rights reserved. 8 of 15 Level 2 Diploma in Bench Joinery Dovetail Half lap Tee bridal Horns Tee bridal, half lap, dovetail, horns
- 9. © 2013 City and Guilds of London Institute. All rights reserved. 9 of 15 Level 2 Diploma in Bench Joinery Stiles, rails, strutt Stiles Rails Centre strutt
- 10. © 2013 City and Guilds of London Institute. All rights reserved. 10 of 15 Level 2 Diploma in Bench Joinery Which tools? Now that you have identified some marking out features. How many marking out tools can you name for each joint? On the following slides, name the tools required to mark out each joint or shape on the material.
- 11. © 2013 City and Guilds of London Institute. All rights reserved. 11 of 15 Level 2 Diploma in Bench Joinery Which tools do you need here? • Square • Pencil • Sliding bevel • Tape measure Can you think of any others? End grain Diagonal brace
- 12. © 2013 City and Guilds of London Institute. All rights reserved. 12 of 15 Level 2 Diploma in Bench Joinery Which tools do you need here? • Marking gauge • Sliding bevel • Dovetail template • Pencil • Set square • Tape measure Can you think of any others? Dovetail half lap
- 13. © 2013 City and Guilds of London Institute. All rights reserved. 13 of 15 Level 2 Diploma in Bench Joinery Which tools do you need here? • Marking gauge • Pencil • Set square • Tape measure Can you think of any others? Half lap
- 14. © 2013 City and Guilds of London Institute. All rights reserved. 14 of 15 Level 2 Diploma in Bench Joinery Which tools do you need here? • Mortice gauge • Pencil • Set square • Tape measure Can you think of any others? Tee bridal
- 15. © 2013 City and Guilds of London Institute. All rights reserved. 15 of 15 Level 2 Diploma in Bench Joinery Any questions?