Wbs For Building Project

Preparing a WBS This WBS structure is designed to control scope by chapters, unlike the original WBS which was developed to control scope by writing and editing.

Preparing a WBS This WBS structure is taking into consideration that the writing and editing will be executed by a contractor. It still requires the contractor to control scope by writing and editing by chapter.

Building a WBS Armed with the basics of the WBS, it is time to examine them in more detail and to begin to understand how to build one. To do this, let’s look at building a WBS for the construction of a single family home. First, take a moment to familiarize yourself with some background information about the construction company, which appears on the next page.

WBS: Structure The ACME Housing Corporation, which you own, has been contracted to build its first house. You want to be able to manage your projects effectively and efficiently, so you charge your project managers to develop an appropriate WBS. You decide to manage the project by the individual tasks necessary to complete the house. You hope that this is the first of many houses that ACME will build, so you start the WBS with ACME in the highest position, or Level 1. Accordingly, Level 1 is given a WBS code of 1. You assign the WBS code of 1 to the highest level because all future projects (houses) will be summarized at Level 1 . Level 1  NOTE: For ease of explanation, our example will assume the following: Design is complete All permits issued All Material ordered Inspection happens

WBS: Structure With Level 1 established, you can begin to complete the WBS. But what should the next level be? The logical next level for ACME is the project level. Level 2 is the level for each individual project, or house, that ACME undertakes. As the chart shows below, Level 2 is identified at the project level: House. Appropriately, the code for Level 2 corresponds to Level 1. In this case, the code is 1.1. Level 1  Level 2 

WBS: Structure Now the WBS for the housing project is complete, right? Actually, no, the WBS is not complete. At this point you determine that you want to divide the work into the major elements needed to build a house. You choose to divide Level 3 into six elements: concrete, framing, plumbing, electrical, interior and roofing. You realize that these are both major deliverables and milestones for managing the project. They also enable you to get to your goal of managing the project by task. Notice the WBS codes at level 3. Each is unique to the project and starts with the WBS code from the level above (1  1.1  1.1.1). Now lets look and see if another level is needed. Level 1  Level 2  Level 3 

WBS: Structure The ACME WBS is taking shape, but it does not quite define the project at a level that shows needed tasks for completion. To do this, one more level needs to be included. Level 4 of the WBS will enable us to manage the project as desired. All of our contractors fit into specific elements at level 4, and so do all specific departments. As with the previous Levels, note the WBS codes that have been assigned to the tasks and their relationship to the previous Level . Level 4  Level 3   Level 1  Level 2

WBS: Structure What do you think? Is the WBS complete? Does it enable the manager to manage at the task level? After a review to make sure that only approved scope is included, our WBS is complete. It does include the necessary components to manage the project by task.

Work Breakdown Structure (WBS) Tree The graphical structure of the WBS is an easy way to identify the project components and relationships of those components; however, the WBS can be displayed in another format as well: the Tree format. Both formats are acceptable. The graphical format is at times easier to understand, but can take up considerable space in a report. The tree is not as easy to understand but is more easily incorporated into a report format. Note the WBS codes and the structure of the Levels in the Tree format mirror the graphical format. The content has not changed; only the way the content is presented has changed. 1 ACME Housing Corporation 1.1 New Home Construction 1.1.1 Concrete 1.1.1.1 Pour Foundation 1.1.1.2 Install Patio 1.1.1.3 Pour Stairway 1.1.2 Framing 1.1.2.1 Frame Exterior Walls 1.1.2.2 Frame Interior Walls 1.1.2.3 Install Roofing Trusses 1.1.3 Plumbing 1.1.3.1 Install Water Lines 1.1.3.2 Install Gas Lines 1.1.3.3 Install B/K Fixtures 1.1.4 Electrical 1.1.4.1 Install Wiring 1.1.4.2 Install Outlets/Switches 1.1.4.3 Install Fixtures 1.1.5 Interior 1.1.5.1 Install Drywall 1.1.5.2 Install Carpets 1.1.5.3 Install Painting 1.1.6 Roofing 1.1.6.1 Install Felt 1.1.6.2 Install Shingles 1.1.6.3 Install Vents

WBS and Earned Value Now that you understand the WBS and how to assemble one, let’s examine how it relates to earned value. In Module 1, we discussed that in implementing earned value, a project manager must have control of the project’s “triple constraint” (scope, schedule and cost). Unlike traditional management, which tracks two components (budget and expenditures), earned value considers three and provides a more robust understanding of a project’s overall progress and health. The WBS is the most important item in defining and controlling the project scope. How does it control the scope? If the WBS is not developed correctly and does not capture all the project scope and only the project scope, then the “earned value” system built using the WBS will be inaccurate. The project manager will lose control of the project before it even begins. Now that you have your WBS, let’s take a look on the next page at the other item needed to properly organize your project.

WBS Dictionary Once the WBS is complete , the WBS dictionary needs to be the next item developed. The WBS dictionary is a narrative documentation of the effort needed to accomplish all work defined in the WBS. The WBS dictionary is developed for the lowest level element in the WBS only. To better understand how a WBS and a WBS dictionary work, let ’ s compare it to a book and the book’s table of contents: The WBS is the table of contents for the project. It captures the contents in an organized fashion (chapters, subchapter). The WBS dictionary is the book itself. It tells the story. In our case the story is what work will be accomplished and what outputs will be produced in each of the WBS elements. The total of these descriptions is how a house will be built and what is needed to build the house. The WBS dictionary will often lead to the development of the statements of work (SOW) for the project. SOWs will be discussed in later modules.

Organization Breakdown Structure (OBS) Now that our WBS is developed, the appropriate resources and responsibilities need to assigned. The first step in doing this is developing the Organizational Breakdown Structure (OBS) for the project. The OBS indicates the organizational relationships and is used as the framework for assigning work responsibilities. Below is an example of the OBS for the ACME house building project. The OBS is structured by Responsible Department and then by Performing Department at the lowest level. This Performing Department level is were the responsibility and resource needed to accomplish the project will be assigned. With the relationships and responsibilities defined, the second and final step is to merge the WBS and OBS. Take a look on the next page. CONCRETE PERF DEPT 6010 M. Manning MASONRY PERF DEPT 6020 T. Greams TEST PERF DEPT 6030 K. Neumann CIVIL RESP DEPT R. Kelly CARPENTRY PERF DEPT 5010 R. Sites ROOFING PERF DEPT 5020 Y. Taylor DRYWALL PERF DEPT 5030 D. Smith STRUCTURAL RESP DEPT P. Tate PERF DEPT 4010 S. Johnson HOOKUP/TIE-IN PERF DEPT 4020 P. Ottis ELECTICAL RESP DEPT J. Sims WATER/SEWER PERF DEPT 3010 K. Wells GAS PERF DEPT 3020 R. Oriely PLUMBING RESP DEPT R. Lee PROJECT OFFICE RESP DEPT B. Smithers WIRING

Responsibility Assignment Matrix (RAM) Merging the WBS and OBS, the project manager creates a Responsibility Assignment Matrix (RAM). The RAM displays the lowest level of both the WBS and the OBS. The integration identifies specific responsibility for Responsibility Assignment Matrix Responsibility Assignment Matrix specific project tasks. It is at this point that the project manager develops control accounts or work package. Control accounts and work packages will be discussed in Module 4. Lets look at what the RAM may look like on the ACME house construction project on the next page.

Responsibility Assignment Matrix (RAM) Below is part of the RAM for the ACME housing project. The lowest level of the WBS appears across the top The lowest level of the OBS appears on the vertical axis An “X” appears at the intersection of the WBS task and OBS personnel. The “X” defines the specific performing department (from the OBS) assigned to complete a task (from the WBS).

Responsibility Assignment Matrix (RAM) To better understand the RAM, consider the ACME housing project. The OBS specifies Mr. Sites and the carpentry department as responsible for framing the exterior walls. Therefore, in the RAM, an X appears at the cross-section between the task, framing the exterior walls, and the responsible party, Mr. Sites. Additionally, Mr. Sites is also responsible for framing the interior walls and installing the roofing trusses .

Responsibility Assignment Matrix (RAM) Alternatively, hours and dollars may be used in the RAM rather than an “X”. Using our ACME House example, the “X” was replaced with the hours needed to complete the task. Now we see that Mr. Sites has 300 hours to frame the exterior walls, 250 hours to frame the interior walls and 175 hours to install the roofing trusses.

Wbs For Building Project

More Related Content

What's hot (20)

Similar to Wbs For Building Project (20)

More from project management (11)

Recently uploaded (20)

Wbs For Building Project

Editor's Notes