SlideShare a Scribd company logo

IMPRESS BIM Methodology (iBIMm) and Façade Retrofit Methodology using Cloud Based Open Source BIM

IES VE, profile picture
IES VE

The Impress project, funded by the EU's Horizon 2020 program, aims to develop prefabricated concrete panels for building facade retrofitting, including energy-efficient designs and innovative manufacturing processes. The project focuses on an iterative design methodology that encompasses the entire design-process cycle, while validating performance outcomes against initial designs on two buildings. Additionally, it addresses challenges in BIM standards and practices, employing various collaborative approaches across multiple countries.

Technology
1 of 53
Downloaded 15 times
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
IMPRESS BIM Methodology (iBIMm) and Façade Retrofit Methodology using Cloud Based Open Source BIM
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre–fabricated Concrete Panels Adalberto Guerra Cabrera
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels About IMPRESS • IMPRESS is a H2020 collaborative project that is developing three different prefabricated panels for the over and re cladding of building facades: (i) a polyurethane based insulated panel (ii) a thin, lightweight pre-cast concrete sandwich panel and (iii) a lightweight pre-cast concrete sandwich panel incorporating Phase Change Materials (PCM). • To create the panels, an innovative manufacturing process is being created that includes Reconfigurable Moulding (RM) techniques, 3D laser scanning and 3D printed technology and 3D printed microstructured formworks. • The overall manufacturing process will take into account complex architectural and aesthetic issues and will allow for faster production while lowering prefabrication costs. • IMPRESS has also developed a new Iterative Design Methodology, which incorporates all stages of the Design-Construct-Install-Operate process and brings energy efficiency in as early as possible in the design process. • The result will be demonstrated on two existing buildings where final as-built product performance will be validated against the initial design. http://www.project-impress.eu/
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Research methodology and sources of information IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels iBIM overview Iterative design methodology BIM Standards, protocols and guidelines. Manufacturer’s product data. IMPRESS software Online management platform Interoperable data server Decision support softwareCase studies. Interview research (Face-to-face, virtual meetings, e-mail, knowledge sharing) Desktop research (Documentation, recorded conferences, peer-reviewed papers) Information management iBIM
Research methodology & sources of information
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Continent Country Organisation/Champion Protocol / Guidelines Collaborative production of information standards Information/work flow standards Europe Czech Republic Czech BIM Council Expert Council for BIM France FFB (Fédération Française du Bâtiment), buildingSMART (France) BIM Road Map: Plan for the digital transition in the building industry, June 2015. Germany Federal Office for Building and Regional Planning Planenbauen 4.0 DIN VDI buildingSMART (Germany) BIM guide for Germany: Road Map for Digital Design and Construction Hungary Hungarian BIM Council buildingSMART (Hungary) Lithuania Founded public body "Skaitmeninė statyba" (Digital Construction), established by Lietuvos Architektu Sajunga (a Lithuanian architects body). Norway Statsbygg buildingSMART Norway Norwegian Homebuilders Association Statsbygg BIM Manual 1.2.1 (2013) Norwegian Home Builders Manual Version 1.0 (2011) Slovakia BIM Association of Slovakia, "BIMaS", (There are neither standards nor legislative requirements to deliver projects in BIM)[0] Spain Ministry of Infrastructure Current Guide adapted from CoBIM from Finland Comisión para la implantación de la metodología BIM buildingSMART Spain Standardization Committees AEN/CTN 41/SC13 DTIE 7.07. BIM Methodology for HVAC. BuildingSmart UBIM Guides 1-13 Switzerland ETH Zurich university, Swiss Society for Engineers and Architects, SIA. Digital Construction Switzerland Syndicate buildingSMART Switzerland SwissBIMalliance Open BIM Guide for Switzerland The Netherlands The Rijksgebouwendienst BIM Loket Building Information Council TNO Boun Informatie Raad buildingSMART (Benelux) Nationaal Model BIM Uitvoeringsplan Information Modelling BIM Project Specifi cation United Kingdom The Construction Project, Information Committee (CPIC), UK BIM Task Group, The Royal Institute of British Architects (RIBA), Construction Industry Council, buildingSMART UKI CIC/BIM Protocol, Product Data Definition document CPIx Protocols IFC: BS ISO 16739:2013, IDM: BS ISO 29481-1:2010, IFD: BS ISO 12006-3:2007, COBie: BS 1192-4:2014, BS 1192-4:2014 BIM LEVEL2: BS 1192:2007 +A2:2016 BS 7000-4:2013 EU-level The technical committee 442 CEN/TC 442 WG4 CEN/TC 442: IFD (ISO 12006-3:2007), IFC (ISO 16739:2013) and IDM (ISO 29481-2:2012)
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Continent Country Organisation/Champion Protocol / Guidelines Collaborative production of information standards Information/ work flow standards Asia Hong Kong The Hong Kong Institute of Building Information Modelling (HKIBIM) Hong Kong Housing Authority (HKHA) Real Estate Developer Association buildingSMART (Hong Kong) Hong Kong Institute of Building Information Modelling BIM Project Specification, HKIBIM (Rev 3.0) India Professionals implementing this technology in Indian construction projects Iran The Iran Building Information Modelling Association (IBIMA) South Korea buildingSMART (South Korea) IFC Road bSI SPEC China Ministry of Science and Technology China BIM Union IFC Rail bSI SPEC National BIM Standard Singapore The Building and Construction Authority (BCA) buildingSMART Singapore Singapore BIM Guide Version 2.0 North America Canada The Institute for BIM in Canada (IBC), The Canada BIM Council, buildingSMART (Canada). AEC(CAN) BIM Protocol Canadian BIM Practice Manual United States of America The Associated General Contractors of America and U.S. contracting firms, The American Institute of Architects, GSA, USACE, National Institute of Building Science, buildingSMART USA. GSA BIM Guide 01 to 08, National BIM Standard-United States, Penn State Project Execution Planning Guide V 2.1 US COBie Version 2.26, US BIM Standard for Precast Concrete, BIM steel initiatives Oceania New Zealand BIM Acceleration Committee New Zealand BIM Handbook, A guide to enabling BIM on building projects Open IFC Model Repository International Building SMART alliance IFC: ISO 16739:2013 BIM Collaboration Format XML, BIM Collaboration Format API
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 BIM case studies for retrofitting documented BIM challenges areas BIM methodologies and collaboration format Cost of hardware and software licenses; Lack of knowledge and technical skills Knowledge and training Demonstrating benefits Standardisation challenges Software and ICT related Business challenges
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Manufacturer’s product data of IMPRESS panels Product data definition • Share panel product information using a standard terminology • Define information requirements on product performance, availability and logistics. • Exchanged through standards including IS 16739 IFC 4 and BS 1192-4 COBie • Products to comply with European Construction Product Regulation (Regulation (EU) No 305/2011) • Include product lifecycle Date of creation Date of completion Parameters Description Classification Template revision Completion revision Responsibility fields Template author Defining Selections Template status Relevant Authority / client Completion fields Template reference Parameter identifier List of unique parameters included in the template including parameter name, description, entry field, data type, units, measure.
The iterative design methodology
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 The iterative design methodology • Energy design considerations early in the design process; • Incorporation of all stages of the Design-Construct-Install-Operate process
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Efforts allocated per stage • Iterative and incremental; • Risk-focused; • Model based decision- making; • Replicable for future façade renovation projects.
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 I- Initiation & Viability Detailed Design I-1 I-2 I-3 I-4 I-5 I-6 I-7 I-8 I-9 I-10 Identificatio n of Need and Awareness of Possible Solutions Use IMPRESS website and Decision Support Software Contacted by IMPRESS Commercial Service Building Assessment Agree Project Performance Brief Evaluate and Cost Project Resource Requirement s Establish an in-house Project Team Finalise IMPRESS Design Solutions Provide Costed Options Agree and sign contract Project Performance Brief Contract
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 II-1 II-2 II-3 II-4 II-5 II-6 II-7 II-8 II-9 Implement QHSEE Management Policy and Procedures Define communication plan Undertake 3rd Party Consultation- Site Development Issues Develop and Agree Project Execution Plan 3D Building Survey Generate BIM Model Develop panel design and structural support system Energy Performance Simulation Complete and Approve BIM generated design documents Design Documents Iterative BIM Model Continue to undertake 3rd Party Consultation Implement Communication Plan Continue implementation of QHSEE Management System Contract Project Performance Brief Initiation & Viability Manufacturing II- Detailed Design
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Installation III - Manufacturing Detailed Design III-1 III-2 III-3 III-4 III-5 III-6 3D Reconfigurable Formwork, 3D Printed Soluble Formwork and Standard Formwork Incorporate monitoring sensors Panel Casting Demoulding/Curing Installation of External Wall Completions Transport 3D Reconfigurable, 3D Printed Soluble & Standard Formworks Design Documents Iterative BIM Model Continue to undertake 3rd Party Consultation Implement Communication Plan Continue implementation of QHSEE Management System Contract Project Performance Brief
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 O&M IV - Installation ManufacturingDetailed Design IV-1 IV-2 Site installation Install and Commission Panel Sensors into BMS Design Documents Iterative BIM Model Continue to undertake 3rd Party Consultation Implement Communication Plan Continue implementation of QHSEE Management System Contract Project Performance Brief
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 V – Operations and Maintenance Manufacturing Installation Detailed Design Initiation & Viability V-1 V-2 Ongoing BMS Sensor Monitoring and Data Collection Life Cycle Analysis (LCA) End of life plan Energy Performance Assessment Design Documents Iterative BIM Model Continue implementation of QHSE Management System Contract- 1 year Warranty & O&M
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Central model evolution
The Information management in BIM
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 IMPRESS BIM Process Map • BIM Execution planning guide • Defines information exchanges
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Information pull-outs IMPRESS BIM Process Map • Information pull- outs for each stage clearly defined
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 BIM methodology and IMPRESS software
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 IMPRESS and 3rd party software
Software – Decision Support Software
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 DSS welcome • Free tool for early assessment of the energy savings by using IMPRESS panels; • Web-based.
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Building footprint • Uses footprint information from openstreetmap. • Assigns location- specific weather data https://www.openstreetmap.org
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 DSS: Survey • General information including: • Construction year; • Ownership; • Schedules.
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 DSS: Survey • Add relevant information about the use of the building: • Window to wall ration; • Fuel used for heating; • Construction type • Type of heating system; • Façade finish; • Roof type; • Ventilation type; • Building height and stories.
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 DSS: Survey • Add relevant information about any existing improvements. • Boiler upgrades • Co-generation • Chillers COPs • Room thermostats; • Speed control; • Air tightness; • Heat recovery.
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 DSS: Survey • Add relevant information about the thermal comfort in the building. • Humidity inside the building • Airflow inside the building; • Room temperature; • “Cold” coming from the wall.
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 • Façade conditions • Orientation; • Existing coating materials; • Heritage protection; • Structural status; • Damp patches; • Vegetation and mould. DSS: Survey
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Suggested panels • A list of applicable panels is displayed; • Simulation will be carried out for these options.
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Early stage results • Potential energy savings for each suggested panel; • Validation of results against energy certificates and detailed models. 155 156 136 0 50 100 150 200 Display Energy Certificate (2012) Detailed IES VE Model Concept Model (DSS) Annual Heating Energy Consumption (kWh/m2/year)
Software – Online management platform (OMP)
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Online management platform • Interactive HTML based web application; • Hosted on a secure web server; • Predefined tasks according to the iterative methodology; • Guidance attached to each task; • Rolling feed and Gantt chart;
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Online management platform • Central repository of shared files; • Status and version control of uploads as suggested by BIM Level 2 guidance
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717
Software - Interoperable Data Exchange Server
IMPRESS BIM Methodology (iBIMm) and Façade Retrofit Methodology using Cloud Based Open Source BIM
IMPRESS BIM Methodology (iBIMm) and Façade Retrofit Methodology using Cloud Based Open Source BIM
IMPRESS BIM Methodology (iBIMm) and Façade Retrofit Methodology using Cloud Based Open Source BIM
Existing conditions model, available metered data. Façade design options integrated in the baseline model. Façade 3D scans Retrofitting stage
Upload baseline models in IFC
Upload simulated data from baseline model
Upload façade models in native format
Upload design models (baseline + façade) in IFC
Download models in IFC and data in CSV
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Conclusions • The iterative design methodology is incremental, risk-focused, and model based decision- making; • The DSS is an early stage energy simulation tool that help non-expert users to decide whether IMPRESS pre-fabricated panels are a suitable refurbishment option for their building, and when this is the case, the DSS creates a report with the potential energy savings for each panel; • The OMP contains all the tasks from the Iterative design methodology allowing visualising and following up each of the required tasks. Also works as a file management platform. • The IDES is a web-based tool that enables model based collaboration between different disciplines through federated models • iBIMm consist on the seamless integration of the Iterative Design Methodology and three pieces of IMPRESS software that enable energy efficiency considerations in the early stage of the design process. • During later stages of the project, further validation work on the two case-studies will be carried out to ensure that the iBIMm is taking full advantage of the developed web tools.
IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Adalberto Guerra Cabrera – R&D Consultant

More Related Content

PDF
The Role of Simulation in BIM
IES VE
 
PPTX
IES BIM Faculty - Digitisation of Construction in 2017 and the role of IESVE
IES VE
 
PDF
Money and the Role of Building Physics Software in the Valuation Chain
IES VE
 
PPTX
IES BIM Faculty - New IESVE Interoperability Navigator
IES VE
 
PPTX
IES BIM Faculty - BIM4Analysis Update
IES VE
 
PDF
M Simpson coursework
Milton Simpson
 
PDF
BIM and Building Performance Simulation – From Single Building to Urban Scale...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PDF
BIM Algorithmic Workflow Case Study - Mr. Eugenio FONTAN BIM Director and Co...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
The Role of Simulation in BIM
IES VE
 
IES BIM Faculty - Digitisation of Construction in 2017 and the role of IESVE
IES VE
 
Money and the Role of Building Physics Software in the Valuation Chain
IES VE
 
IES BIM Faculty - New IESVE Interoperability Navigator
IES VE
 
IES BIM Faculty - BIM4Analysis Update
IES VE
 
M Simpson coursework
Milton Simpson
 
BIM and Building Performance Simulation – From Single Building to Urban Scale...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
BIM Algorithmic Workflow Case Study - Mr. Eugenio FONTAN BIM Director and Co...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 

What's hot (20)

PDF
One Click LCA & IES Integration
IES VE
 
PDF
BIM Workflows: from Products to Practice - Mr. Peter KONCZ Business Developm...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PDF
IMPACT & Life Cycle Assessment
IES VE
 
PDF
Streamlining bim workflow by standardising design process - Desmond Leung
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PDF
A New World of BIM by Ir Francis Leung – Construction Department New World De...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PDF
A Holistic BIM Framework for Structural Engineering Practices in Hong Kong - ...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PPSX
BIM SHOW LIVE 14 - Story of BIM from design to use
BuiltEnvironmentUBM
 
PDF
A Case Study of Using Combined BIM and GIS Model for Building Energy Conserva...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PDF
The future of BIM is open - or - Is proprietary BIM unsustainable
Be2camp Admin
 
PDF
Digital & BIM in Total Architecture
Green Initiatives 绿色倡议
 
PDF
Architype - Green BIM UK Perspective, NTU Taipei, 13 February 2014
Elrond Burrell
 
PPTX
BIM (Building Information Modeling) for digital construction
Sailish Cephas
 
PPTX
Webinar: BIM for MEP engineers | 23 March 2017
Stabiplan
 
PDF
Revit Projects 1
Donald Fillmore PMP
 
PDF
Bim
Mohammad AL-ja'afreh
 
PDF
Architype - Delivering Radical Low Energy Performance with BIM
Elrond Burrell
 
PDF
Green BIM
nagham ali hasan
 
PPT
BIM - A New Concept in Practice
rondellaria
 
PPTX
Revit and Building Information Modeling (BIM) Presentation
ryanabarton
 
PPT
Labs 21 BIM & Sustainability
The Design Partnership
 
One Click LCA & IES Integration
IES VE
 
BIM Workflows: from Products to Practice - Mr. Peter KONCZ Business Developm...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
IMPACT & Life Cycle Assessment
IES VE
 
Streamlining bim workflow by standardising design process - Desmond Leung
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
A New World of BIM by Ir Francis Leung – Construction Department New World De...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
A Holistic BIM Framework for Structural Engineering Practices in Hong Kong - ...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
BIM SHOW LIVE 14 - Story of BIM from design to use
BuiltEnvironmentUBM
 
A Case Study of Using Combined BIM and GIS Model for Building Energy Conserva...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
The future of BIM is open - or - Is proprietary BIM unsustainable
Be2camp Admin
 
Digital & BIM in Total Architecture
Green Initiatives 绿色倡议
 
Architype - Green BIM UK Perspective, NTU Taipei, 13 February 2014
Elrond Burrell
 
BIM (Building Information Modeling) for digital construction
Sailish Cephas
 
Webinar: BIM for MEP engineers | 23 March 2017
Stabiplan
 
Revit Projects 1
Donald Fillmore PMP
 
Bim
Mohammad AL-ja'afreh
 
Architype - Delivering Radical Low Energy Performance with BIM
Elrond Burrell
 
Green BIM
nagham ali hasan
 
BIM - A New Concept in Practice
rondellaria
 
Revit and Building Information Modeling (BIM) Presentation
ryanabarton
 
Labs 21 BIM & Sustainability
The Design Partnership
 
Ad

Similar to IMPRESS BIM Methodology (iBIMm) and Façade Retrofit Methodology using Cloud Based Open Source BIM (20)

PDF
How to Create a Rock Star BIM Execution Plan (BEP) and MPDT* (Responsibility ...
Fabio Roberti
 
PPT
Intro to buildingsmart and COBie - Nick Tune at Ecobuild 2015
The NBS
 
PPT
BIM in Project Management: Keynote Speech by Mr. Kevin POOLE
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PDF
Salah Yousif, module 1, introduction to bim and the business case of bim
Salah Yousif
 
PDF
Bim lod
anandkc77
 
PPTX
Bim and building life cycle
Abdoul-Aziz Gansonre
 
PDF
Opening Keynote Speech (By Video) Ms. Ada Fung, JP Chairperson, The Construct...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PDF
381783 efca flipbook_bim_basic
Tran Anh Vinh
 
PDF
STANDARD TO BE FOLLOWED WHILE EXECUTING BIM
VigneshWaran770976
 
PDF
The Role of CIC on BIM Development
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PDF
Collaboration - Open Opportunities & Bring Possibilities - Mr. Alex HO Senior...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PDF
UNNC and BSI BIM Management Training I & II - September 2017
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PDF
Marcin Klocek - Architecture + BIM portfolio.pdf
Marcin Klocek
 
PPT
The Impact of Digital Engineering – Tim Broyd (ICE) #COMIT2016
Comit Projects Ltd
 
PPTX
Change Management For Building Information Modelling (BIM)
Ir. Abdul Aziz Abas
 
PDF
BIM Project Execution Plans and Open BIM via IFC2x3
Alfredo Carrato
 
PDF
BIM Networking Seminar: Documentation from BIM - Tips for GBP Submission to BD
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
PPTX
BIM for ABU DHABI AIRPORT (1).pptx
RachitJain690950
 
PDF
Citation- Enchanted Storybrook Castle2
Christian Munoz
 
PPTX
BIM Assignment Presentation BIM Assignment Presentation BIM Assignment Presen...
MohamedElHamrawy2
 
How to Create a Rock Star BIM Execution Plan (BEP) and MPDT* (Responsibility ...
Fabio Roberti
 
Intro to buildingsmart and COBie - Nick Tune at Ecobuild 2015
The NBS
 
BIM in Project Management: Keynote Speech by Mr. Kevin POOLE
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
Salah Yousif, module 1, introduction to bim and the business case of bim
Salah Yousif
 
Bim lod
anandkc77
 
Bim and building life cycle
Abdoul-Aziz Gansonre
 
Opening Keynote Speech (By Video) Ms. Ada Fung, JP Chairperson, The Construct...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
381783 efca flipbook_bim_basic
Tran Anh Vinh
 
STANDARD TO BE FOLLOWED WHILE EXECUTING BIM
VigneshWaran770976
 
The Role of CIC on BIM Development
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
Collaboration - Open Opportunities & Bring Possibilities - Mr. Alex HO Senior...
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
UNNC and BSI BIM Management Training I & II - September 2017
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
Marcin Klocek - Architecture + BIM portfolio.pdf
Marcin Klocek
 
The Impact of Digital Engineering – Tim Broyd (ICE) #COMIT2016
Comit Projects Ltd
 
Change Management For Building Information Modelling (BIM)
Ir. Abdul Aziz Abas
 
BIM Project Execution Plans and Open BIM via IFC2x3
Alfredo Carrato
 
BIM Networking Seminar: Documentation from BIM - Tips for GBP Submission to BD
The Hong Kong Institute of Building Information Modelling (HKIBIM)
 
BIM for ABU DHABI AIRPORT (1).pptx
RachitJain690950
 
Citation- Enchanted Storybrook Castle2
Christian Munoz
 
BIM Assignment Presentation BIM Assignment Presentation BIM Assignment Presen...
MohamedElHamrawy2
 
Ad

More from IES VE (20)

PPTX
Passive House Canada Conference 2025 Presentation [Final]_v4.ppt
IES VE
 
PPTX
The Importance of Indoor Air Quality | IES and Octopus Lab
IES VE
 
PPTX
From buy-in to monitoring: Executing the plan for a long-lasting successful r...
IES VE
 
PDF
Incorporating Operational Data into Your VE Workflows
IES VE
 
PPTX
Closing the Performance Gap with Detailed HVAC Modelling & In-Use Performance...
IES VE
 
PDF
Building Performance for Architects with IES
IES VE
 
PPTX
Energy Modelling and Data Analytics for Net-Zero Retrofit
IES VE
 
PDF
Using IESVE for ASHRAE 90.1-2019 Compliance – Energy Cost Budget Method
IES VE
 
PPTX
The Role of Performance Digital Twins in Achieving Net-Zero Campus Estates - IES
IES VE
 
PPTX
Introducing the New IESVE Passivent Tool
IES VE
 
PDF
Parametric Simulation with IESVE Software
IES VE
 
PPTX
Automated Internal Condensation Prediction Using the VE Scripting Tool
IES VE
 
PDF
Using IESVE for Room Loads Analysis - Australia & New Zealand
IES VE
 
PDF
IESVE for Early Stage Design and Planning
IES VE
 
PDF
Using IESVE for Room Loads Analysis - UK & Ireland
IES VE
 
PPTX
Decarbonising Commercial Real Estate: The Role of Operational Performance
IES VE
 
PPTX
Decarbonising Buildings: Making a net-zero built environment a reality
IES VE
 
PPTX
Retrofitting for the Built Environment - IES
IES VE
 
PDF
IESVE Software for Florida Code Compliance Using ASHRAE 90.1-2019
IES VE
 
PDF
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve Decarbonization
IES VE
 
Passive House Canada Conference 2025 Presentation [Final]_v4.ppt
IES VE
 
The Importance of Indoor Air Quality | IES and Octopus Lab
IES VE
 
From buy-in to monitoring: Executing the plan for a long-lasting successful r...
IES VE
 
Incorporating Operational Data into Your VE Workflows
IES VE
 
Closing the Performance Gap with Detailed HVAC Modelling & In-Use Performance...
IES VE
 
Building Performance for Architects with IES
IES VE
 
Energy Modelling and Data Analytics for Net-Zero Retrofit
IES VE
 
Using IESVE for ASHRAE 90.1-2019 Compliance – Energy Cost Budget Method
IES VE
 
The Role of Performance Digital Twins in Achieving Net-Zero Campus Estates - IES
IES VE
 
Introducing the New IESVE Passivent Tool
IES VE
 
Parametric Simulation with IESVE Software
IES VE
 
Automated Internal Condensation Prediction Using the VE Scripting Tool
IES VE
 
Using IESVE for Room Loads Analysis - Australia & New Zealand
IES VE
 
IESVE for Early Stage Design and Planning
IES VE
 
Using IESVE for Room Loads Analysis - UK & Ireland
IES VE
 
Decarbonising Commercial Real Estate: The Role of Operational Performance
IES VE
 
Decarbonising Buildings: Making a net-zero built environment a reality
IES VE
 
Retrofitting for the Built Environment - IES
IES VE
 
IESVE Software for Florida Code Compliance Using ASHRAE 90.1-2019
IES VE
 
Using IESVE for Loads, Sizing and Heat Pump Modeling to Achieve Decarbonization
IES VE
 

Recently uploaded (20)

PPTX
Machine Learning_overview_presentation.pptx
kondavamsidharreddy2
 
PDF
Spectral efficient network and resource selection model in 5G networks
IAESIJAI
 
PDF
Optimiser vos workloads AI/ML sur Amazon EC2 et AWS Graviton
Julien SIMON
 
PDF
Profit Center Accounting in SAP S/4HANA, S4F28 Col11
Libreria ERP
 
PDF
Build a system with the filesystem maintained by OSTree @ COSCUP 2025
Jian-Hong Pan
 
PPTX
Spectroscopy.pptx food analysis technology
nawahassan45
 
PDF
Electronic commerce courselecture one. Pdf
OmerMohamed64
 
PDF
Dropbox Q2 2025 Financial Results & Investor Presentation
Dropbox
 
PDF
Assigned Numbers - 2025 - Bluetooth® Document
Bloombase
 
PDF
Empathic Computing: Creating Shared Understanding
Mark Billinghurst
 
PPTX
VMware vSphere Foundation How to Sell Presentation-Ver1.4-2-14-2024.pptx
blackmambaettijean
 
PPTX
20250228 LYD VKU AI Blended-Learning.pptx
DatVoNgoc
 
PDF
Peak of Data & AI Encore- AI for Metadata and Smarter Workflows
Safe Software
 
PDF
Agricultural_Statistics_at_a_Glance_2022_0.pdf
SandeepSingh286037
 
PPTX
ACSFv1EN-58255 AWS Academy Cloud Security Foundations.pptx
23bcla24
 
PDF
Architecting across the Boundaries of two Complex Domains - Healthcare & Tech...
Peter Tan
 
PDF
Chapter 3 Spatial Domain Image Processing.pdf
Getnet Tigabie Askale -(GM)
 
PPTX
Digital-Transformation-Roadmap-for-Companies.pptx
David Malick Dieng
 
PDF
Mobile App Security Testing_ A Comprehensive Guide.pdf
flufftailshop
 
PDF
Reach Out and Touch Someone: Haptics and Empathic Computing
Mark Billinghurst
 
Machine Learning_overview_presentation.pptx
kondavamsidharreddy2
 
Spectral efficient network and resource selection model in 5G networks
IAESIJAI
 
Optimiser vos workloads AI/ML sur Amazon EC2 et AWS Graviton
Julien SIMON
 
Profit Center Accounting in SAP S/4HANA, S4F28 Col11
Libreria ERP
 
Build a system with the filesystem maintained by OSTree @ COSCUP 2025
Jian-Hong Pan
 
Spectroscopy.pptx food analysis technology
nawahassan45
 
Electronic commerce courselecture one. Pdf
OmerMohamed64
 
Dropbox Q2 2025 Financial Results & Investor Presentation
Dropbox
 
Assigned Numbers - 2025 - Bluetooth® Document
Bloombase
 
Empathic Computing: Creating Shared Understanding
Mark Billinghurst
 
VMware vSphere Foundation How to Sell Presentation-Ver1.4-2-14-2024.pptx
blackmambaettijean
 
20250228 LYD VKU AI Blended-Learning.pptx
DatVoNgoc
 
Peak of Data & AI Encore- AI for Metadata and Smarter Workflows
Safe Software
 
Agricultural_Statistics_at_a_Glance_2022_0.pdf
SandeepSingh286037
 
ACSFv1EN-58255 AWS Academy Cloud Security Foundations.pptx
23bcla24
 
Architecting across the Boundaries of two Complex Domains - Healthcare & Tech...
Peter Tan
 
Chapter 3 Spatial Domain Image Processing.pdf
Getnet Tigabie Askale -(GM)
 
Digital-Transformation-Roadmap-for-Companies.pptx
David Malick Dieng
 
Mobile App Security Testing_ A Comprehensive Guide.pdf
flufftailshop
 
Reach Out and Touch Someone: Haptics and Empathic Computing
Mark Billinghurst
 

IMPRESS BIM Methodology (iBIMm) and Façade Retrofit Methodology using Cloud Based Open Source BIM

  • 2. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre–fabricated Concrete Panels Adalberto Guerra Cabrera
  • 3. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels About IMPRESS • IMPRESS is a H2020 collaborative project that is developing three different prefabricated panels for the over and re cladding of building facades: (i) a polyurethane based insulated panel (ii) a thin, lightweight pre-cast concrete sandwich panel and (iii) a lightweight pre-cast concrete sandwich panel incorporating Phase Change Materials (PCM). • To create the panels, an innovative manufacturing process is being created that includes Reconfigurable Moulding (RM) techniques, 3D laser scanning and 3D printed technology and 3D printed microstructured formworks. • The overall manufacturing process will take into account complex architectural and aesthetic issues and will allow for faster production while lowering prefabrication costs. • IMPRESS has also developed a new Iterative Design Methodology, which incorporates all stages of the Design-Construct-Install-Operate process and brings energy efficiency in as early as possible in the design process. • The result will be demonstrated on two existing buildings where final as-built product performance will be validated against the initial design. http://www.project-impress.eu/
  • 4. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Research methodology and sources of information IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels iBIM overview Iterative design methodology BIM Standards, protocols and guidelines. Manufacturer’s product data. IMPRESS software Online management platform Interoperable data server Decision support softwareCase studies. Interview research (Face-to-face, virtual meetings, e-mail, knowledge sharing) Desktop research (Documentation, recorded conferences, peer-reviewed papers) Information management iBIM
  • 5. Research methodology & sources of information
  • 6. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Continent Country Organisation/Champion Protocol / Guidelines Collaborative production of information standards Information/work flow standards Europe Czech Republic Czech BIM Council Expert Council for BIM France FFB (Fédération Française du Bâtiment), buildingSMART (France) BIM Road Map: Plan for the digital transition in the building industry, June 2015. Germany Federal Office for Building and Regional Planning Planenbauen 4.0 DIN VDI buildingSMART (Germany) BIM guide for Germany: Road Map for Digital Design and Construction Hungary Hungarian BIM Council buildingSMART (Hungary) Lithuania Founded public body "Skaitmeninė statyba" (Digital Construction), established by Lietuvos Architektu Sajunga (a Lithuanian architects body). Norway Statsbygg buildingSMART Norway Norwegian Homebuilders Association Statsbygg BIM Manual 1.2.1 (2013) Norwegian Home Builders Manual Version 1.0 (2011) Slovakia BIM Association of Slovakia, "BIMaS", (There are neither standards nor legislative requirements to deliver projects in BIM)[0] Spain Ministry of Infrastructure Current Guide adapted from CoBIM from Finland Comisión para la implantación de la metodología BIM buildingSMART Spain Standardization Committees AEN/CTN 41/SC13 DTIE 7.07. BIM Methodology for HVAC. BuildingSmart UBIM Guides 1-13 Switzerland ETH Zurich university, Swiss Society for Engineers and Architects, SIA. Digital Construction Switzerland Syndicate buildingSMART Switzerland SwissBIMalliance Open BIM Guide for Switzerland The Netherlands The Rijksgebouwendienst BIM Loket Building Information Council TNO Boun Informatie Raad buildingSMART (Benelux) Nationaal Model BIM Uitvoeringsplan Information Modelling BIM Project Specifi cation United Kingdom The Construction Project, Information Committee (CPIC), UK BIM Task Group, The Royal Institute of British Architects (RIBA), Construction Industry Council, buildingSMART UKI CIC/BIM Protocol, Product Data Definition document CPIx Protocols IFC: BS ISO 16739:2013, IDM: BS ISO 29481-1:2010, IFD: BS ISO 12006-3:2007, COBie: BS 1192-4:2014, BS 1192-4:2014 BIM LEVEL2: BS 1192:2007 +A2:2016 BS 7000-4:2013 EU-level The technical committee 442 CEN/TC 442 WG4 CEN/TC 442: IFD (ISO 12006-3:2007), IFC (ISO 16739:2013) and IDM (ISO 29481-2:2012)
  • 7. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Continent Country Organisation/Champion Protocol / Guidelines Collaborative production of information standards Information/ work flow standards Asia Hong Kong The Hong Kong Institute of Building Information Modelling (HKIBIM) Hong Kong Housing Authority (HKHA) Real Estate Developer Association buildingSMART (Hong Kong) Hong Kong Institute of Building Information Modelling BIM Project Specification, HKIBIM (Rev 3.0) India Professionals implementing this technology in Indian construction projects Iran The Iran Building Information Modelling Association (IBIMA) South Korea buildingSMART (South Korea) IFC Road bSI SPEC China Ministry of Science and Technology China BIM Union IFC Rail bSI SPEC National BIM Standard Singapore The Building and Construction Authority (BCA) buildingSMART Singapore Singapore BIM Guide Version 2.0 North America Canada The Institute for BIM in Canada (IBC), The Canada BIM Council, buildingSMART (Canada). AEC(CAN) BIM Protocol Canadian BIM Practice Manual United States of America The Associated General Contractors of America and U.S. contracting firms, The American Institute of Architects, GSA, USACE, National Institute of Building Science, buildingSMART USA. GSA BIM Guide 01 to 08, National BIM Standard-United States, Penn State Project Execution Planning Guide V 2.1 US COBie Version 2.26, US BIM Standard for Precast Concrete, BIM steel initiatives Oceania New Zealand BIM Acceleration Committee New Zealand BIM Handbook, A guide to enabling BIM on building projects Open IFC Model Repository International Building SMART alliance IFC: ISO 16739:2013 BIM Collaboration Format XML, BIM Collaboration Format API
  • 8. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 BIM case studies for retrofitting documented BIM challenges areas BIM methodologies and collaboration format Cost of hardware and software licenses; Lack of knowledge and technical skills Knowledge and training Demonstrating benefits Standardisation challenges Software and ICT related Business challenges
  • 9. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Manufacturer’s product data of IMPRESS panels Product data definition • Share panel product information using a standard terminology • Define information requirements on product performance, availability and logistics. • Exchanged through standards including IS 16739 IFC 4 and BS 1192-4 COBie • Products to comply with European Construction Product Regulation (Regulation (EU) No 305/2011) • Include product lifecycle Date of creation Date of completion Parameters Description Classification Template revision Completion revision Responsibility fields Template author Defining Selections Template status Relevant Authority / client Completion fields Template reference Parameter identifier List of unique parameters included in the template including parameter name, description, entry field, data type, units, measure.
  • 10. The iterative design methodology
  • 11. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 The iterative design methodology • Energy design considerations early in the design process; • Incorporation of all stages of the Design-Construct-Install-Operate process
  • 12. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Efforts allocated per stage • Iterative and incremental; • Risk-focused; • Model based decision- making; • Replicable for future façade renovation projects.
  • 13. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 I- Initiation & Viability Detailed Design I-1 I-2 I-3 I-4 I-5 I-6 I-7 I-8 I-9 I-10 Identificatio n of Need and Awareness of Possible Solutions Use IMPRESS website and Decision Support Software Contacted by IMPRESS Commercial Service Building Assessment Agree Project Performance Brief Evaluate and Cost Project Resource Requirement s Establish an in-house Project Team Finalise IMPRESS Design Solutions Provide Costed Options Agree and sign contract Project Performance Brief Contract
  • 14. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 II-1 II-2 II-3 II-4 II-5 II-6 II-7 II-8 II-9 Implement QHSEE Management Policy and Procedures Define communication plan Undertake 3rd Party Consultation- Site Development Issues Develop and Agree Project Execution Plan 3D Building Survey Generate BIM Model Develop panel design and structural support system Energy Performance Simulation Complete and Approve BIM generated design documents Design Documents Iterative BIM Model Continue to undertake 3rd Party Consultation Implement Communication Plan Continue implementation of QHSEE Management System Contract Project Performance Brief Initiation & Viability Manufacturing II- Detailed Design
  • 15. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Installation III - Manufacturing Detailed Design III-1 III-2 III-3 III-4 III-5 III-6 3D Reconfigurable Formwork, 3D Printed Soluble Formwork and Standard Formwork Incorporate monitoring sensors Panel Casting Demoulding/Curing Installation of External Wall Completions Transport 3D Reconfigurable, 3D Printed Soluble & Standard Formworks Design Documents Iterative BIM Model Continue to undertake 3rd Party Consultation Implement Communication Plan Continue implementation of QHSEE Management System Contract Project Performance Brief
  • 16. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 O&M IV - Installation ManufacturingDetailed Design IV-1 IV-2 Site installation Install and Commission Panel Sensors into BMS Design Documents Iterative BIM Model Continue to undertake 3rd Party Consultation Implement Communication Plan Continue implementation of QHSEE Management System Contract Project Performance Brief
  • 17. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 V – Operations and Maintenance Manufacturing Installation Detailed Design Initiation & Viability V-1 V-2 Ongoing BMS Sensor Monitoring and Data Collection Life Cycle Analysis (LCA) End of life plan Energy Performance Assessment Design Documents Iterative BIM Model Continue implementation of QHSE Management System Contract- 1 year Warranty & O&M
  • 18. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Central model evolution
  • 20. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 IMPRESS BIM Process Map • BIM Execution planning guide • Defines information exchanges
  • 21. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Information pull-outs IMPRESS BIM Process Map • Information pull- outs for each stage clearly defined
  • 22. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 BIM methodology and IMPRESS software
  • 23. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 IMPRESS and 3rd party software
  • 24. Software – Decision Support Software
  • 25. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 DSS welcome • Free tool for early assessment of the energy savings by using IMPRESS panels; • Web-based.
  • 26. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Building footprint • Uses footprint information from openstreetmap. • Assigns location- specific weather data https://www.openstreetmap.org
  • 27. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 DSS: Survey • General information including: • Construction year; • Ownership; • Schedules.
  • 28. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 DSS: Survey • Add relevant information about the use of the building: • Window to wall ration; • Fuel used for heating; • Construction type • Type of heating system; • Façade finish; • Roof type; • Ventilation type; • Building height and stories.
  • 29. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 DSS: Survey • Add relevant information about any existing improvements. • Boiler upgrades • Co-generation • Chillers COPs • Room thermostats; • Speed control; • Air tightness; • Heat recovery.
  • 30. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 DSS: Survey • Add relevant information about the thermal comfort in the building. • Humidity inside the building • Airflow inside the building; • Room temperature; • “Cold” coming from the wall.
  • 31. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 • Façade conditions • Orientation; • Existing coating materials; • Heritage protection; • Structural status; • Damp patches; • Vegetation and mould. DSS: Survey
  • 32. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Suggested panels • A list of applicable panels is displayed; • Simulation will be carried out for these options.
  • 33. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Early stage results • Potential energy savings for each suggested panel; • Validation of results against energy certificates and detailed models. 155 156 136 0 50 100 150 200 Display Energy Certificate (2012) Detailed IES VE Model Concept Model (DSS) Annual Heating Energy Consumption (kWh/m2/year)
  • 34. Software – Online management platform (OMP)
  • 35. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Online management platform • Interactive HTML based web application; • Hosted on a secure web server; • Predefined tasks according to the iterative methodology; • Guidance attached to each task; • Rolling feed and Gantt chart;
  • 36. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717
  • 37. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717
  • 38. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717
  • 39. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717
  • 40. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Online management platform • Central repository of shared files; • Status and version control of uploads as suggested by BIM Level 2 guidance
  • 41. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717
  • 42. Software - Interoperable Data Exchange Server
  • 46. Existing conditions model, available metered data. Façade design options integrated in the baseline model. Façade 3D scans Retrofitting stage
  • 49. Upload façade models in native format
  • 52. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Conclusions • The iterative design methodology is incremental, risk-focused, and model based decision- making; • The DSS is an early stage energy simulation tool that help non-expert users to decide whether IMPRESS pre-fabricated panels are a suitable refurbishment option for their building, and when this is the case, the DSS creates a report with the potential energy savings for each panel; • The OMP contains all the tasks from the Iterative design methodology allowing visualising and following up each of the required tasks. Also works as a file management platform. • The IDES is a web-based tool that enables model based collaboration between different disciplines through federated models • iBIMm consist on the seamless integration of the Iterative Design Methodology and three pieces of IMPRESS software that enable energy efficiency considerations in the early stage of the design process. • During later stages of the project, further validation work on the two case-studies will be carried out to ensure that the iBIMm is taking full advantage of the developed web tools.
  • 53. IMPRESS BIM Methodology & Software Tools (iBIMm) for Façade Retrofitting Using Pre– fabricated Concrete Panels This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 636717 Adalberto Guerra Cabrera – R&D Consultant