Wired robotics Boot Camp
Download as PPTX, PDF0 likes806 views
The document introduces a wired robotics workshop covering the fundamentals of robotics, including various types of robots such as wired, wireless, autonomous, and semi-autonomous. It outlines the components provided in the Level 1 bot kit, such as motors and chassis, and describes key parts like dpdt switches and power supplies. The workshop aims to provide hands-on understanding through assembly and connection tasks.
Wired robotics Boot Camp
- 1. IEEE-KCCOE Presents Wired Robotics Workshop
- 2. Introduction • Robotics is a branch of engineering that involves the conception, design, manufacture, and operation of robots. This field overlaps with electronics, computer science, artificial intelligence , mechatronics, nanotechnology , and bioengineering • Robotics brings together several very different engineering areas and skills.
- 3. Types • Wired Robot (Level 1) • Wireless • Autonomous • Semi-autonomous • IC Engine • Robotics arms
- 4. Wired Robot (Level 1) • Level 1 Robot is completely manual . A robot that must be controlled manually by someone or something. It needs to be told what to do, how to do it, and when to do it.
- 5. Wireless Robot • Wireless Robot has a system so that it can be controlled with a wireless joystick or controller
- 6. Autonomous • Autonomous robots are robots that can perform desired tasks in unstructured environments without continuous human guidance.
- 7. Semi – Autonomous • A semiautonomous robot is controlled by its programming and is restricted to what its programming tells it. It can not learn further than a certain point
- 8. IC Engine • The internal combustion engine is an engine in which the combustion of a fuel (normally a fossil fuel) occurs with an oxidizer (usually air) in a combustion chamber that is an integral part of the working fluid flow circuit.
- 9. Robotic Arms • A typical robotic arm is made up of metal segments and can be joined by number of joints. The computer controls the robot by rotating individual step motors connected to each joint (some larger arms use hydraulics or pneumatics).
- 11. Workshop Details • Understanding the basics of robotics (Level 1) • Assembly • Connection Level 1 Bot
- 12. KIT CONTENT • These are following components provided in your kit :- Power Supply (12 volt , 4.5 Ah) - 1 DPDT Switch- 2 Ribbon wire strip- 5 meters+ DC Geared Motors 4 Chassis(having holes for motor) - 1 Remote box 1 Wheels 4 Soldering wire - as required
- 13. Chassis • A chassis acts as an mainframe body support for man-made object in its construction and use. It is analogous to an animal's skeleton • Base on which other components are attached
- 14. Chassis
- 15. Motor • Internal Diagram of DC Motor • Types- Geared motors and Stepper motors
- 16. Wires Types :- On the basis of the structure Single Strand Multiple strand On the basis of thickness 1mm2 4mm2 6mm2 …..etc
- 17. Remote Box
- 18. Power Supply 12 V , 4.5 Ah
- 19. DPDT Switches Double Pole Double Throw • A DPDT switch allows the electrical relays to operate an electrical structure. The transistor devices use an electromagnet that produces a low voltage control circuit. • The way in which the DPDT switch works is through electrical voltage.
- 21. FUTURE MODIFICATIONS • Showcase • Videos • Pictures • Detroix Event bots
- 22. www.ieee-kccoe.org Join our Facebook group IEEE KCCOE Facebook page: https://www.facebook.com/official.ieee.kccoe IEEE360DEG : https://www.facebook.com/Ieee360DegreesKccoe
- 23. THANK YOU!