05 pmp scope management exam

you are here 4 219
scope management
Exam Questions
1. Which of the following is TRUE about a work breakdown structure?
It contains work packages that are described in a linear, unstructured listA.
Each item in the WBS represents a feature in the product scopeB.
The WBS represents all of the work that must be done on the projectC.
The WBS is created by the product sponsor and stakeholdersD.
2. Which is NOT an output of a scope management process?
Business CaseA.
B. WBS Dictionary
Requested changesC.
Accepted deliverablesD.
3. Which of the following is NOT TRUE about a work breakdown structure?
It describes processes to define the scope, verify work, and manage scope changesA.
It contains a graphical, hierarchical list of all work to be performedB.
It can be broken down byC. project phase or deliverable
It is an important element of theD. scope baseline
4. What is the correct order of the scope management processes?
Define Scope, Create WBS,A. Collect Requirements, Scope Verification
Collect Requirements,B. Control Scope, Create WBS, Scope Verification
Collect Requirements, Define Scope, Create WBS, Scope VerificationC.
D. Collect Requirements, Scope Baseline, Define Scope, Control Scope
5. You are managing a software project. Your team has been working for eight weeks, and
so far the project is on track. The lead programmer comes to you with a problem: there is a
work package that is causing trouble. Nobody seems to know who is responsible for it, the
accounting department does not know what cost center to bill it against, and it’s not even
clear exactly what work should be performed. Which of the following would BEST help this
situation?
Alternatives AnalysisA.
WBS DictionaryB.
Scope Management PlanC.
Scope VerificationD.
Download at Boykma.Com

220 Chapter 5
Exam Questions
6. The goal of Verify Scope is:
To inspect the scope statement for defects so that it is correctA.
To gain formal acceptance of the project deliverables from the sponsor and stakeholdersB.
To get everyone in the project working together towards a common goalC.
To verify that all PMBOK® Guide processes are complied withD.
7. Historical information and lessons learned are part of:
Organizational process assetsA.
Enterprise environmental factorsB.
Project management information system (PMIS)C.
Work performance informationD.
8. You’ve taken over as a project manager on a highway construction project, and the execution is already underway.
Your sponsor tells you that moving forward, all asphalt should be laid down with a 12” thickness. The scope
statement and the WBS call for 9” thick asphalt. What is the BEST course of action?
Look for a cheaper supplier so the cost impact is minimizedA.
Tell the sponsor that the work is already underway, so you can’t accommodate his requestB.
Refuse to alter the plans until the change control system has been usedC.
Tell the team to accommodate the request immediatelyD.
9. Which of the following BEST describes the purpose of a traceability matrix?
It describes how WBS Dictionary entries are traced to work packages, and how work packages are decomposedA.
from deliverables
It’s used to make sure that all of the sub-plans of the Project Management Plan have been createdB.
It helps you understand the source of each requirement, and how that requirement was verified in a later deliverableC.
It’s used to trace the source of every change, so that you can keep track of them through the entire Control ScopeD.
process and verify that the change was properly implemented
10. It’s the end of execution for a large highway construction project. The work has been done, and the workers are
ready to pack up their equipment. The project manager and project sponsor have come by with specialists to check
that each requirement has been met, and that all of the work in the WBS has been performed. What process is being
done?
Control ScopeA.
Verify ScopeB.
Scope TestingC.
Define ScopeD.
exam questions

you are here 4 221
scope management
Exam Questions
11. You have just been put in charge of a project that is already executing. While reviewing the project
documentation, you discover that there is no WBS. You check the Scope Management Plan and discover that
there should be one for this project. What is the BEST thing for you to do:
Immediately alert the sponsor and make sure the project work doesn’t stopA.
Stop project work and create the WBS, and don’t let work continue until it’s createdB.
Make sure you closely manage communications to ensure the team doesn’t miss any undocumented workC.
Mark it down in the lessons learned so it doesn’t happen on future projectsD.
12. A project manager on an industrial design project finds that the sponsor wants to make a change to the
scope after it has been added to the baseline, and needs to know the procedure for managing changes. What
is the BEST place to look for this information?
WBSA.
Scope management planB.
Change request form templateC.
Business CaseD.
13. You have just started work on the Project Scope Statement. You are analyzing the expected deliverables,
when you discover that one of them could be delivered in three different ways. You select the best method
for creating that deliverable. What is the BEST way to describe what you are doing?
Alternatives AnalysisA.
DecompositionB.
Define ScopeC.
Stakeholder AnalysisD.
14. You’re the project manager on a software project. Your team has only completed half of the work, when
the sponsor informs you that the project has been terminated. What is the BEST action for you to take?
Verify the deliverables produced by the team against the scope, and document any place they do not matchA.
Call a team meeting to figure out how to spend the rest of the budgetB.
Work with the sponsor to see if there is any way to bring the project backC.
Tell the team to stop working immediatelyD.
15. You are managing an industrial design project. One of your team members comes to you with a
suggestion that will let you do more work while at the same time saving the project 15% of the budget. What
is the BEST way for you to proceed?
Tell the team to make the change because it will deliver more work for less moneyA.
Refuse to make the change until aB. change request is documented and change control is performed
Refuse to consider the change because it will affect the baselineC.
Do a cost-benefit analysis and then make sure to inform the sponsor that the project scope changedD.

222 Chapter 5
Exam Questions
16. You are the project manager for a telecommunications project. You are working on the project scope statement.
Which of the following is NOT included in this document?
Authorization for the project manager to work on the projectA.
Requirements that the deliverables must meetB.
A description of the project objectivesC.
The list of deliverables that must be createdD.
17. Which of the following is NOT an input to Control Scope?
WBS DictionaryA.
Approved change requestsB.
Requested changesC.
Project scope statementD.
18. Which of these processes is not a part of Scope Management?
Scope IdentificationA.
Collect RequirementsB.
Control ScopeC.
Scope VerificationD.
19. You are the project manager for a new project, and you want to save time creating the WBS. Which is the BEST
way to do this?
MakeA. decomposition go faster by cutting down the number of deliverables
Use a WBS from a previous project as a templateB.
Don’t create the WBS DictionaryC.
Ask the sponsor to provide the work packages for each deliverableD.
20. The project manager for a design project is using the Define Scope process. Which BEST describes this?
Creating a document that lists all of the features of the productA.
Creating a plan for managing changes to theB. scope baseline
Creating a document that describes all of the work the team does to make the deliverablesC.
Creating a graphical representation of how the phases or deliverables decompose into work packagesD.
21. You are the project manager for a construction project. You have completed project initiation activities, and you
are now creating a document that describes processes to document the scope, decompose deliverables into work
packages, verify that all work is complete, and manage changes to the baseline. What process are you performing?
Develop Project Management PlanA.
Define ScopeB.
Create WBSC.
Develop Project CharterD.
exam questions

you are here 4 223
scope management
Exam Questions
22. You are a project manager working on a project. Your sponsor wants to know who a certain work package is
assigned to, what control account to bill it against, and what work is involved. What document do you refer her
to?
Scope Management PlanA.
WBSB.
WBS DictionaryC.
D. Scope Statement
24. You are the project manager for a software project. One of the teams discovers that if they deviate from the
plan, they can actually skip one of the deliverables because it’s no longer necessary. They do the calculations,
and realize they can save the customer 10% of the cost of the project without compromising the features in the
product. They take this approach, and inform you the following week what they did during the status meeting.
What is the BEST way to describe this situation?
The project team has taken initiative and saved the customer moneyA.
A dispute is resolved in favor of the customerB.
The team informed the project manager of the change, but they should have informed the customer tooC.
The team did not follow the Control Scope processD.
25. Which of the following BEST describes the purpose of the project scope statement?
It describes the features of the product of the projectA.
It is created before theB. scope management plan
It decomposes deliverables into work packagesC.
It describes the objectives, requirements, and deliverables of the project, and the work needed to create themD.
26. A project manager at a cable and networking company is gathering requirements for a project to build a new
version of their telecommunications equipment. Which of the following is NOT something that she will use?
Specific descriptions of work packages that will be developedA.
One-on-one interviews with the senior executives who need the new equipment for their teamsB.
An early working model of the telecommunications equipment to help get feedback from stakeholdersC.
Notes that she took while being “embedded” with the team that will eventually use the equipment beingD.
developed
27. Which of the following is NOT an output of Collect Requirements?
Requirements ObservationsA.
Requirements Traceability MatrixB.
Requirements DocumentationC.
Requirements Management PlanD.

224 Chapter 5
Exam Questions
Answers
1. Answer: C
The work breakdown structure is all about breaking down the work that your team needs to do. The WBS is graphical
and hierarchical, not linear and unstructured. Did you notice that answer B was about product scope, not project scope?
2. Answer: A
There are two ways you can get to the right answer for this question. You can recognize that the WBS Dictionary,
Change Requests, and Accepted Deliverables are all Scope Management process outputs. (You’ll see Change
Requests in every knowledge area!) But you can also recognize that the Business Case was created by the Develop
Projct Charter which is part of the Initiating process group.
3. Answer: A
Did you recognize that answer A was describing the scope management plan? Once you know what the WBS is used
for and how to make one, questions like this make sense.
4. Answer: C
You’ll need to know what order processes come in, and one good way to do that is to think
about how the outputs of some processes are used as inputs for another. For example, you
can’t create the WBS until the scope is defined, which is why A is wrong. And you can’t do
change control until you have a baseline WBS, which is why B is wrong.
5. Answer: B
An important tactic for a lot of exam questions is to be able to recognize a particular tool, technique, input, or output
from a description. What have you learned about that tells you who is responsible for a work package, what control
account to associate with it, and describes the work associated with it? That’s a good description of the WBS Dictionary.
6. Answer: B
There are some questions where you’ll just have to know what a process is all about, and this is one of them. That’s
why it’s really helpful to know why Verify Scope is so helpful to you on a project. You use Verify Scope to check that all
of the work packages were completed, and get the stakeholders and sponsor to formally accept the deliverables.
Take a minute and think about how there’s no “right” order for Scope Verification
and Control Scope. You could have a scope change at the beginning of the project, so
Control Scope would come first. But a change could happen late in the project, too! If
there’s a major change to the project after the scope’s verified, you need to redo it.
exam answers
Inspection isn’t just done at the end of the
project. You do Scope Verification on every
single deliverable made by you and the team.

you are here 4 225
scope management
Exam Questions
Answers
The PMBOK® Guide says this stuff
is stored in a “corporate knowledge
base,” but that’s just another word
for a file cabinet or a folder on your
network
7. Answer: A
It’s easy to forget that Organizational Process Assets is more than just an input. It’s a real thing that’s part of your
company. Take a second and think about what assets are in your organization that help you with carry out each
process. Get it? Good! So what is historical information, anyway? It’s stuff like reports and data that you or another
project manager wrote down on a previous project and stored in a file cabinet or a database. That’s an asset you can
use now! What are lessons learned? Those are lessons you wrote down at the end of a previous project and stuck in
a file cabinet or a database. And now those lessons are another asset you can use.
8. Answer: C
One thing to remember about change control is that if you want to make the sponsor and stakeholders happy with
the project in the end, sometimes you have to tell them “no” right now. When you’re doing Control Scope, the most
important tool you use is the change control system. It tells you how to take an approved change and put it in place on
a project, and there’s no other way that you should ever make a change to any part of the baseline. That means that
once everyone has approved the scope statement and WBS, if you want to make any change to them, then you need
to get that change approved and put it through the change control system.
9. Answer: C
The Requirements Traceability Matrix is a tool that you use to trace each requirement back to a specific business case,
and then forward to the rest of the scope deliverables (like specific WBS work packages), as well as other parts of the
project: the product design (like specific levels in Cows Gone Wild) or test strategy (like test plans that the Ranch Hand
Games testers use to make sure that the game works).
These inputs and outputs make
sense when I think about how I’d
use them on a project. Organizational
Process Assets are just things that my
organization keeps track of to help me do
my job, like information from old projects
and procedures that help me do my job.
The idea is that you’re tracing a deliverable
from its initial description all the way
through the project through testing, so that
you can make sure that every single deliverable
meets all of its requirements.

226 Chapter 5
10. Answer: B
When you’re getting the sponsor and stakeholders to formally accept the results of the project, you’re doing scope
verification. There’s only one tool for it: inspection. That means carefully checking the deliverables (in this case,
what the workers built on the highway) to make sure they match the WBS.
11. Answer: B
This question is a little tricky. The most important thing about a WBS is that if your Scope Management Plan says it
should be there, then your project absolutely cannot be done without it. And a general rule is that if you ever find that
there is no WBS, you should always check the Scope Management Plan to find out why.
12. Answer: B
This is another question that is testing you on the definition of a specific document, in this case the Scope
Management Plan, which is one of the subsidiary plans of the Project Management Plan. Think about what you
use a Scope Management Plan for. It gives you specific procedures for defining the scope, breaking down the work,
verifying the deliverables, and managing scope changes—which is what this question is asking. All of the other
answers don’t have anything to do with managing changes.
Exam Questions
Answers
Answer D is a good idea, but it’s notas important as creating a new WBS.
That way, if I need to
restart the project later or
reuse some of its deliverables, I’ll
know exactly where my team left
off when it ended.
13. Answer: A
Here’s another example of how there are two correct answers but only one
BEST one. Answer C is true – you are doing scope definition. But is that
really the best way to describe this situation? Alternatives analysis is part
of scope definition, and it’s a more accurate way to describe what’s going
on here.
14. Answer: A
This question is an example of how you need to rely on more than just
common sense to pass the PMP exam. All four of these answers could be
good ways to handle a terminated project, but there’s only one of those
answers that corresponds to what the PMBOK® Guide says. When a
project is terminated, you still need to complete the Verify Scope process.
That way, you can document all of the work that has been completed, and
the work that has not been completed.
When you look at a few ways to createa deliverable and then decide on thebest one, that’s alternatives analysis.
exam answers

you are here 4 227
scope management
Exam Questions
Answers
15. Answer: B
Are you starting to get the hang of how this change control stuff works? The baseline isn’t etched in stone, and
you need to be able to change it, but you can’t just go ahead and make changes whenever you want. You need
to document the change request and then put that request through change control. If it’s approved, then you can
update the baseline so that it incorporates the change.
16. Answer: A
When a question asks you about what a particular document, input, or output contains, be on the lookout for
answers that talk about a different document. What document do you know about that gives the project manager
authorization to do the work? That’s what the project charter is for.
17. Answer: C
Sometimes Control Scope is easiest to think about if you think of it as a kind of machine that turns approved
changes into updates. It sucks in the approved changes and all of the other Scope Management stuff (the Scope
Statement, WBS, and WBS Dictionary), does all the stuff that it needs to do to update those things, and then spits
out updates. And sometimes it spits out new requested changes because when you’re making changes to the
WBS or Scope Statement you realize that you need to make even more changes.
18. Answer: A
Scope Identification is a made-up process. It
didn’t appear in this chapter, and even though it
sounds real, it’s wrong.
19. Answer: B
WBS templates are a great way to speed up
creating the WBS, and the easiest way to create
a template is to use one from a previous project.
It is not a good idea to cut out deliverables, skip
important outputs like the WBS Dictionary, or
make the sponsor do your job for you.
You definitely can’t just makethe change and inform thesponsor later. All changes needto be approved.
I think of Perform Integrated
Change Control as a machine
that turns change requests into
approved changes, and Control
Scope as the machine that turns
approved changes into updates
to the scope baseline.
You can also use a
template for the scope
management plan.

228 Chapter 5
Exam Questions
Answers
20. Answer: C
This question asked you about the Define Scope process, but all of the answers describe various outputs. Which of
these outputs matches Define Scope? Well, the main output of Define Scope is the Scope Statement, and answer
C is a good description of the scope statement.
21. Answer: A
This question asked you where you defined the procedures for doing all of the Scope Management Processes.
Where do you find those procedures? You find them in the Project Management Plan—specifically, the Scope
Management Plan sub-plan. And you build that in the Develop Project Management Plan process.
22. Answer: C
There’s only one document you’ve seen that shows you details of individual work packages and contains a control
account, a statement of work, and a resource assignment. It’s the WBS Dictionary.
23. Answer: D
Here’s another question where you need to know how to describe an important tool. In this case, you need to know
what the change control system is used for. Luckily, answer D is a pretty good description.
Hey, I’ll bet a good way to study for
the exam is to look at answers A, B, and C
in question 23 and figure out what each of
them is describing. It’ll be great practice
identifying an output from a description!
exam answers
Did you guess “Create WBS” because it was a ScopeManagement process and the question mentioneddecomposing deliverables into work packages?

you are here 4 229
scope management
Exam Questions
Answers
24. Answer: D
When you read the question, it looks like the team really helped the project, right? But think about what happened: the
team abandoned the plan, and then they made a change to the project without getting approval from the sponsor or
stakeholders. Maybe they discovered a useful shortcut. But isn’t it possible that the shortcut the team found was already
considered and rejected by the sponsor? That’s why change control is so important.
25. Answer: D
Some questions are just definition questions. When that definition is a “Which-is-BEST” question, there could be an
answer that makes some sense, and it’s tempting to stop with it. In this case, answer A sounds like it might be right. But if
you read answer D, it’s much more accurate.
26. Answer: A
The question asked about the tools and techniques for Collect Requirements, and answer A is the only answer that has to
do with the Create WBS process. The rest of the answers were descriptions of Collect Requirements tools and techniques:
Interviews (answer B), Prototypes (answer C), and Observations (answer D).
27. Answer: A
The three outputs of Collect Requirements are Requirements Documentation, the Requirements Management Plan, and
the Requirements Traceability Matrix. “Requirements Observations” isn’t really an output.
Keep an eye out for questions that describe an input
or output and then ask you to name it. Look at each
answer and think up own descriptions for them—one
of them will match the question.
Did you notice how the question made it sound like the team
did a good thing by ignoring Control Scope and making changes
that were never approved?
The easiest way to make sure you get questionslike this right is to think about how each of thoseoutputs are actually used later in the project.

05 pmp scope management exam

More Related Content

What's hot (20)

Similar to 05 pmp scope management exam (20)

More from Jamil Faraj , PMP (12)

Recently uploaded (20)

05 pmp scope management exam