2018 FRSecure CISSP Mentor Program- Session 5

CISSP® MENTOR
PROGRAM SESSION #5
EVAN FRANCEN, CEO & CO-FOUNDER,FRSECURE
BRAD NIGH, DIRECTOR OF CONSULTING SERVICES, FRSECURE
2018 – CLASS #5

CISSP® MENTOR PROGRAM – SESSION #5
Great job so far! Keep it up, you can do this! We’re through Chapters 1, 2,
3, and part way into Chapter 4!
• Check-in.
• How many have read Chapter 1, 2 & 3?
• Questions?
CISSP® MENTOR PROGRAM
We’re going to go fast tonight.We’ve got 157 slides!

Quiz!
1.What model should you use if you are primarily concerned with confidentiality
of information?
A. Brewer-Nash
B. Bell-LaPadula
C. Biba
D. Clark-Wilson

Quiz!
2. On Intel ×86 systems, the kernel normally runs in which CPU ring?
A. Ring 0
B. Ring 1
C. Ring 2
D. Ring 3

Quiz!
3. Which type of cloud service level would Linux hosting be offered under?
A. IaaS
B. IDaaS
C. PaaS
D. SaaS

Quiz!
4. Nonrepudiation is best described as what?
A. Proving a user performed a transaction
B. Proving a transaction did not change
C. Authenticating a transaction
D. Proving a user performed a transaction that did not change

Where we left off…

Agenda – Domain 3: Security Engineering
• Cornerstone Cryptographic Concepts
• History of Cryptography
• Types of Cryptography
• Cryptographic Attacks
• Implementing Cryptography
• Perimeter Defenses
• Site Selection, Design, and Configuration
• System Defenses
• Environmental Controls
Formerly separate domains: Security Architecture, Cryptography, and Physical Security
Starting on page 160 this evening
This is the last class for this domain! Then you breathe.

Symmetric Encryption
• Uses one key to encrypt and decrypt
• Also called “Secret key” encryption
• Strengths include speed and cryptographic strength per bit of key
• Major weakness is that the key must be securely shared before two parties may communicate securely
• Keys are often shared via an out-of-band method
Stream and Block Ciphers
• Stream mode means each bit is independently encrypted in a “stream.”
• Block mode ciphers encrypt blocks of data each round:
• 56 bits for the Data Encryption Standard (DES)
• 128, 192,or 256 bits for AES
• Some block ciphers can emulate stream ciphers by setting the block size to 1 bit; they are still considered
block ciphers.

Initialization Vectors and Chaining
• Initialization vector is used in some symmetric ciphers to ensure that the first
encrypted block of data is random.
• Ensures that identical plaintexts encrypt to different ciphertexts
• Two messages that begin the same will encrypt the same way up to the first
difference. Some messages have a common header: a letterhead, or a ‘From’ line, or
whatever.”
• Chaining (called feedback in stream modes) seeds the previous encrypted
block into the next block to be encrypted
• Destroys patterns in the resulting ciphertext

Data Encryption Standard (DES)
• DES is the Data Encryption Standard
• Describes the Data Encryption Algorithm (DEA)
• Made a United States federal standard symmetric cipher in 1976
• Designed by IBM, based on their older Lucifer symmetric cipher
• Uses a 64-bit block size (meaning it encrypts 64 bits each round) and a
56-bit key.

Data Encryption Standard (DES) - Modes
• DES can use five different modes to encrypt data
• The modes’ primary difference is block versus (emulated) stream, the use of initialization vectors, and whether errors in
encryption will propagate to subsequent blocks.
• The five modes of DES are:
• Electronic Code Book (ECB)
• Cipher Block Chaining (CBC)
• Cipher Feedback (CFB)
• Output Feedback (OFB)
• Counter Mode (CTR)
• ECB is the original mode of DES
• CBC, CFB, and OFB were later added in FIPS Publication 81 (see http://www.itl.nist.gov/fipspubs/fip81.htm)
• CTR mode is the newest mode, described in NIST Special Publication 800-38a (see:
http://csrc.nist.gov/publications/nistpubs/800-38a/sp800-38a.pdf)

Data Encryption Standard (DES) - Electronic Code Book (ECB)
• The simplest and weakest form of DES
• No initialization vector or chaining
• Identical plaintexts with identical keys encrypt to identical ciphertexts

Data Encryption Standard (DES) - Cipher Block Chaining (CBC)
• A block mode of DES
• XORs the previous encrypted block of ciphertext to the next block of plaintext to be encrypted
• First encrypted block is an initialization vector that contains random data
• The “chaining” destroys patterns
• One limitation of CBC mode is that encryption errors will propagate: an encryption error in one block will
cascade through subsequent blocks due to the chaining, destroying their integrity.

Data Encryption Standard (DES) - Cipher Feedback (CFB)
• Very similar to CBC; the primary difference is CFB is a stream mode
• Uses feedback (the name for chaining when used in stream modes) to destroy
patterns
• Like CBC, CFB uses an initialization vector and destroys patterns, and errors
propagate

Data Encryption Standard (DES) - Output Feedback (OFB)
• Differs from CFB in the way feedback is accomplished
• CFB uses the previous ciphertext for feedback.The previous ciphertext is the
subkey XORed to the plaintext.
• OFB uses the subkey before it is XORed to the plaintext.
• Since the subkey is not affected by encryption errors, errors will not propagate.

Data Encryption Standard (DES) - Counter (CTR)
• Like OFB; the difference again is the feedback: CTRmode uses a counter
• Shares the same advantages as OFB (patterns are destroyed and errors
do not propagate) with an additional advantage: since the feedback can
be as simple as an ascending number, CTR mode encryption can be
done in parallel

Data Encryption Standard (DES) – Modes Comparison Table

Data Encryption Standard (DES) – Single DES
• Original implementation of DES
• Encrypts 64-bit blocks of data with a 56-bit key, using 16 rounds of encryption
• Work factor required to break DES was reasonable in 1976
• Massively parallel computers such as COPACOBANA (Cost-Optimized Parallel
COde Breaker, given as a nontestable example, see:
http://www.copacobana.org for more information), which uses over 100 CPUs
in parallel, can break 56-bit DES in a week or so (and faster with more CPUs), at
a cost of under $10,000.

Data Encryption Standard (DES) – Triple DES
• Applies single DES encryption three times per block
• Became a recommended standard in 1999 by the United States Federal Information
Processing Standard (FIPS) Publication 46-3 (see:
http://csrc.nist.gov/publications/fips/fips46-3/fips46-3.pdf)
• The primary weakness is that it is slow and complex compared to newer symmetric
algorithms such as AES or Twofish
NOTE:“Double DES” (applying DES encryption twice using two keys) is not used due to
a meet-in-the-middle attack

Symmetric
Encryption
FIPS Publication 46-3

Data Encryption Standard (DES) – Triple DES encryption order and keying options
• Applies DES encryption three times per block
• FIPS 46-3 describes “Encrypt, Decrypt, Encrypt” (EDE) order using three keying options: one, two, or
three unique keys (called 1TDES EDE, 2TDES EDE, and 3TDES EDE, respectively)
• Applying triple DES EDE with the same key each time results in the same ciphertext as single DES
• 2TDES EDE uses key 1 to encrypt, key 2 to “decrypt,” and key 1 to encrypt.This results in 112 bits of key
length. It is commonly used for legacy hardware applications with limited memory
• 3TDES EDE (three different keys) is the strongest form, with 168 bits of key length
• Two- and three-key TDES EDE remain a FIPS-approved standard until 2030 (sort of)

Data Encryption Standard (DES) – Triple DES encryption order and
keying options

International Data Encryption Algorithm (IDEA)
• A symmetric block cipher designed as an international replacement to
DES
• Patented in many countries
• Uses a 128-bit key and 64-bit block size
• Held up to cryptanalysis
• Primary drawbacks are patent encumbrance and its slow speed
compared to newer symmetric ciphers such as AES

Advanced Encryption Standard (AES)
• Current United States standard symmetric block cipher
• Federal Information Processing Standard (FIPS) 197 (see:
http://csrc.nist.gov/publications/fips/fips197/fips-197.pdf)
• Uses 128-bit (with 10 rounds of encryption), 192-bit (12 rounds of encryption),
or 256-bit (14 rounds of encryption) keys to encrypt 128-bit blocks of data
• Open algorithm, free to use, and free of any intellectual property restrictions
• Designed to replace DES

Advanced Encryption Standard (AES) - Choosing AES
• National Institute of Standards and Technology (NIST) solicited input on a replacement
for DES in the Federal Register in January 1997
• Fifteen AES candidates were announced in August 1998
• List was reduced to five in August 1999
• Rijndael was chosen and became AES

Advanced Encryption Standard (AES) - AES functions
• AES has four functions:
• SubBytes
• ShiftRows
• MixColumns
• AddRoundKey
• Operates on data called a “State” – 4 rows of 4 16 byte blocks

Advanced Encryption Standard (AES) - AES functions - SubBytes
• Provides confusion by substituting the bytes of the State
• Bytes are substituted according to a substitution table (also called an S-Box)

Advanced Encryption Standard (AES) - AES functions - ShiftRows
• Provides diffusion by shifting rows of the State (block of data that is
being encrypted via AES)

Advanced Encryption Standard (AES) - AES functions - MixColumns
• Provides diffusion by “mixing” the columns of the State via finite field
mathematics

Advanced Encryption Standard (AES) - AES functions - AddRoundKey
• Final function applied in each round
• XORS the State with the subkey
• Subkey is derived from the key, and is different for each round of AES

Blowfish and Twofish
• Symmetric block ciphers created by teams lead by Bruce Schneier
• Blowfish uses from 32 through 448 bit (the default is 128) keys to encrypt
64 bits of data
• Twofish was an AES finalist, encrypting 128-bit blocks using 128 through
256 bit keys
• Both are open algorithms, unpatented and freely available

Blowfish and Twofish

RC5 and RC6
• Symmetric block ciphers by RSA Laboratories
• RC5 uses 32 (testing purposes), 64 (replacement for DES), or 128-
bit blocks.The key size ranges from zero to 2040 bits.
• RC6 was an AES finalist. It is based on RC5, altered to meet the
AES requirements. It is also stronger than RC5, encrypting 128-bit
blocks using 128-, 192-, or 256-bit keys.

Asymmetric Encryption
• Solves the age-old challenge of preshared keys
• Whitfield Diffie and Martin Hellman, who created the Diffie-Hellman key exchange in 1976
• RSA algorithm was invented in 1977 (RSA stands for “Rivest, Shamir, and Adleman,” the
authors’ names)
• Uses two keys: if you encrypt with one key, you may decrypt with the other
• Also called public key encryption
• Public – Private key pair
• Math lies behind the asymmetric encryption - methods use “one-way functions,” which are
easy to compute “one way,” and difficult to compute in the reverse direction.

Methods
Math lies behind the asymmetric encryption - methods use “one-way functions,” which are easy to compute “one way,” and
difficult to compute in the reverse direction.
Factoring Prime Numbers
• Factoring a composite number into its primes
• Prime number is a number evenly divisible only by one and itself
• Composite number is evenly divisible by numbers other than 1 and itself.
• Multiplying the prime number 6269 by the prime number 7883 results in the composite number 49,418,527.That “way” is
quite easy to compute, taking milliseconds on a calculator. Answering the question “which prime number times which
prime number equals 49,418,527”is much more difficult.
• The problem is called factoring, and no shortcut has been found for hundreds of years
• Basis of the RSA algorithm
• Factoring a large composite number (one thousands of bits long) is so difficult that the composite number can be safely
publicly posted (this is the public key).
• The primes that are multiplied to create the public key must be kept private (they are the private key).

Methods
Math lies behind the asymmetric encryption - methods use “one-way functions,”
which are easy to compute “one way,” and difficult to compute in the reverse
direction.
Discrete Logarithm
• A logarithm is the opposite of exponentiation
• Computing 7 to the 13th power (exponentiation) is easy on a modern
calculator: 96,889,010,407. Asking the question “96,889,010,407 is 7 to what
power” (finding the logarithm) is more difficult
• Basis of the Diffie-Helmann and ElGamal asymmetric algorithms

Diffie-Hellman key agreement protocol
• Allows two parties to securely agree on a symmetric key via a public channel
• Also called the Diffie-Hellman Key Exchange

Elliptic Curve Cryptography (ECC)
• One-way function that uses discrete logarithms as applied to elliptic curves
• Solving this problem is harder than solving discrete logarithms, so algorithms
based on Elliptic Curve Cryptography (ECC) are much stronger per bit than
systems using discrete logarithms (and also stronger than factoring prime
numbers)
• Requires less computational resources because shorter keys can be used
compared to other asymmetric methods
• Often used in lower power devices

Asymmetric and Symmetric Tradeoffs
• Asymmetric encryption is far slower than symmetric encryption
• Asymmetric encryption is weaker per bit of key length
• Asymmetric and symmetric encryption are typically used
together: use an asymmetric algorithm such as RSA to securely
send someone an AES (symmetric) key

Hash Functions
• Provides encryption using an algorithm and no key
• Called “one-way hash functions” because there is no way to reverse the
encryption
• A variable-length plaintext is “hashed” into a fixed-length hash value (often
called a “message digest” or a “hash”)
• Primarily used to provide integrity: if the hash of a plaintext changes, the
plaintext itself has changed
• Older hash functions include Secure Hash Algorithm 1 (SHA-1), which creates a
160-bit hash and Message Digest 5 (MD5), which creates a 128-bit hash
• Newer alternatives such as SHA-2 are recommended

Hash Functions
Collisions
• Hashes are not unique, because the number
of possible plaintexts is far larger than the
number of possible hashes
• More than one document could have the
same hash: this is called a collision
• Collisions are always possible (assuming the
plaintext is longer than the hash), they should
be very difficult to find

Hash Functions
MD5
• Message Digest algorithm 5, created by Ronald Rivest
• Creates a 128-bit hash value based on any input length
• Weaknesses have been discovered where collisions could be
found in a practical amount of time
• MD6 is the newest version of the MD family of hash algorithms,
first published in 2008

Hash Functions
Secure Hash Algorithm (SHA)
• Name of a series of hash algorithms
• SHA-1 was announced in 1993 in the United States Federal Information
Processing Standard 180 (see http://www.itl.nist.gov/fipspubs/fip180-1.htm)
• SHA-1 creates a 160-bit hash value
• SHA-2 is recommended over SHA-1 or MD5
• The SHA-3 competition was announced in the Federal Register in 2007; SHA-3
was announced as a standard in the Fall of 2015 - Keccak algorithm
(http://csrc.nist.gov/publications/drafts/fips-202/fips_202_draft.pdf)

Hash Functions
HAVAL
• Hash of Variable Length
• Creates message digests of 128, 160, 192, 224, or 256 bits in
length, using 3, 4, or 5 rounds
• Uses some of the design principles behind the MD family of hash
algorithms, and is faster than MD5

Cryptographic Attacks
Used by cryptanalysts to recover the plaintext without the key or
to recover the key itself
Brute Force
• Generates the entire keyspace, which is every possible key
• Given enough time, the plaintext will be recovered
• Effective attack against all key-based ciphers, except for the one-time
pad

Used by cryptanalysts to recover the plaintext without the key or to recover the key
itself
Known Plaintext
• Relies on recovering and analyzing a matching plaintext and ciphertext pair
• The goal is to derive the key which was used
Chosen Plaintext and Adaptive Chosen Plaintext
• Cryptanalyst chooses the plaintext to be encrypted
• Goal is to derive the key
• Adaptive-chosen plaintext begins with a chosen plaintext attack in round 1.The cryptanalyst
then “adapts” further rounds of encryption based on the previous round

Used by cryptanalysts to recover the plaintext without the key or to recover the key itself
Chosen Ciphertext and Adaptive Chosen Ciphertext
• Mirror chosen plaintext attacks: the difference is that the cryptanalyst chooses the ciphertext to be
decrypted
• Usually launched against asymmetric cryptosystems
Meet-in-the-middle Attack
• Meet-in-the-middle attack encrypts on one side, decrypts on the other side, and meets in the middle
• Common attack is against “double DES”
• Attack is a known plaintext attack: the attacker has a copy of a matching plaintext and ciphertext, and
seeks to recover the two keys used to encrypt.

Known Key
• Known key means the cryptanalyst knows something about the key, to reduce the efforts used to attack it.
• If the cryptanalyst knows that the key is an uppercase letter and a number only, other characters may be
omitted in the attack.
Differential Cryptanalysis
• Seeks to find the “difference” between related plaintexts that are encrypted
• Usually launched as an adaptive chosen plaintext attack
• The cryptanalyst uses statistical analysis to search for signs of nonrandomness in the ciphertexts

Used by cryptanalysts to recover the plaintext without the key or to recover
the key itself
Linear Cryptanalysis
• A known plaintext attack where the cryptanalyst finds large amounts of
plaintext/ciphertext pairs created with the same key
• The pairs are studied to derive information about the key used to create them
Side-channel Attacks
Use physical data to break a cryptosystem, such as monitoring CPU cycles or power
consumption used while encrypting or decrypting

Birthday Attack
• Named after the birthday paradox
• Based on fact that in a room with 23 people or more, the odds are greater than 50% that two will share
the same birthday
• The birthday paradox illustrates why many people’s instinct on probability (and risk) is wrong.You are
not trying to match a specific birthday (such as yours); you are trying to match any birthday.
• Used to create hash collisions
Key Clustering
Occurs when two different symmetric keys applied to the same plaintext produce the same ciphertext

Implementing Cryptography
Digital Signatures
• Used to cryptographically sign documents
• Provide nonrepudiation, which includes authentication of the identity of the signer,
and proof of the document’s integrity (proving the document did not change)
• Use a hash function to generate a hash value of the plaintext
• Create the digital signature by encrypting the hash with a private key
• Digital signatures provide authentication and integrity, which forms
nonrepudiation.They do not provide confidentiality: the plaintext remains
unencrypted.

Implementing Cryptography
HMAC
• Combines symmetric encryption with hashing
• Similar to a digital signature, except that it uses symmetric encryption instead of
asymmetric
• HMACs are used by IPsec
• Two parties must preshare a secret key (such as a DES key). Once shared, the sender may
generate a HMAC by hashing the message with an algorithm such as MD5 or SHA-1, and
then encrypting the hash with the preshared key via symmetric cipher such as DES
• The receiver hashes the plaintext locally and also decrypts the HMAC with his/her copy of
the private key, recovering the sender’s hash. If the two hashes match, the sender is
authenticated, and the message’s integrity is assured.

Public Key Infrastructure (PKI)
• Leverages all three forms of encryption to provide and manage digital
certificates
• A digital certificate is a public key signed with a digital signature
• Digital certificates may be server-based (used for SSL Web sites such
as https://www.ebay.com, for example) or client-based (bound to a
person).
• If the two are used together, they provide mutual authentication and
encryption.
• The standard digital certificate format is X.509.

Public Key Infrastructure (PKI)
Certificate Authorities
• Digital certificates are issued by Certificate Authorities (CAs)
• Authenticate the identity of a person or organization before issuing a
certificate to them
• CAs may be private (run internally) or public (such as Verisign or Thawte)
Certificate Revocation Lists
• Certificate Authorities maintain Certificate Revocation Lists (CRL)
• List certificates that have been revoked

IPSec
• Suite of protocols that provide a cryptographic layer to both IPv4 and
IPv6
• One of the methods used to provide Virtual Private Networks (VPN)
• Includes two primary protocols: Authentication Header (AH) and
Encapsulating Security Payload (ESP).
• AH and ESP provide different, and sometimes overlapping functionality
• Supporting IPsec protocols include Internet Security Association and
Key Management Protocol (ISAKMP) and Internet Key Exchange (IKE)

IPSec
AH and ESP
• Authentication Header provides authentication and integrity for each
packet of network data
• AH provides no confidentiality; it acts as a digital signature for the data
• AH also protects against replay attacks
• Encapsulating Security Payload primarily provides confidentiality by
encrypting packet data

IPSec
Security Association and ISAKMP
• An IPsec Security Association (SA) is a simplex (one-way) connection which
may be used to negotiate ESP or AH parameters
• If two systems communicate via ESP, they use two SAs (one for each direction).
If the systems leverage AH in addition to ESP, they use two more SAs, for a total
of four
• Each simplex SA connection is identified by a unique 32-bit number called the
Security Parameter Index (SPI)
• The SA process is managed by the Internet Security Association and Key
Management Protocol (ISAKMP)

IPSec
Tunnel and Transport Mode
• IPsec can be used in tunnel mode or transport mode
• Tunnel mode is used by security gateways (which can provide point-to-
point IPsec tunnels)
• ESP Tunnel mode encrypts the entire packet, including the original
packet headers
• ESP Transport mode only encrypts the data (and not the original
headers); this is commonly used when the sending and receiving
system can “speak” IPsec natively

IPSec
IKE
• IPsec can use a variety of encryption algorithms, such as MD5 or SHA-1
for integrity, and triple DES or AES for confidentiality
• The algorithm selection process is negotiated by the Internet Key
Exchange
• Two sides of an IPsec tunnel will typically use IKE to negotiate to the
highest and fastest level of security, selecting AES over single DES for
confidentiality if both sides support AES, for example

SSL and TLS
• SSL authenticates and provides confidentiality to Web traffic
• Transport Layer Security (TLS) is the successor to SSL
• SSL and TLS are commonly used as part of HTTPS (Hypertext Transfer Protocol Secure)
• When you connect to a Web site such as https://www.isc2.org/, the data is encrypted.This is true even if
you have not preshared a key: the data is encrypted out of the gate.This is done via asymmetric
encryption: your browser downloads the digital certificate of www.isc2.org, which includes the site’s
public key, signed by the Certificate Authority’s private key. If your browser trusts the CA (such as
Verisign), then this signature authenticates the site: you know its isc2.org and not a rogue site.Your
browser then uses that public key to securely exchange a symmetric session key.The private key is
stored on the isc2.org Web server, which allows it to decrypt anything encrypted with the public key.The
symmetric key is then used to encrypt the rest of the session.
• SSL was developed for the Netscape Web browser in the 1990s. SSL 2.0 was the first released version; SSL
3.0 fixed a number of security issues with version 2.

PGP
• Pretty Good Privacy – Asymmetric Encryption
• Released by Phil Zimmerman in 1991
• Uses a Web of trust model to authenticate digital certificates,
instead of relying on a central certificate authority (CA) - If you
trust that my digital certificate authenticates my identity, the Web
of trust means you trust all the digital certificates that I trust.

S/MIME
• MIME (Multipurpose Internet Mail Extensions)
• S/MIME (Secure/MIME) leverages PKI to encrypt and
authenticate MIME-encoded email
• Encryption may be done by the client or client’s email server
(called an S/MIME gateway)

Escrowed Encryption
• Takes a private key and divides it into two or more parts
• The parts are held in escrow by different trusted third-party organizations, which will only release their
portion of the key with proper authorization, such as a court order
• Balance between an individual’s privacy, and the needs of law enforcement
Clipper Chip
• The name of the technology used in the Escrowed Encryption Standard (EES)
• Announced in 1993 by the United States government to deploy escrowed encryption in
telecommunications devices
• Created a media firestorm, and was abandoned by 1996
• Used the Skipjack algorithm, a symmetric cipher that uses an 80-bit key, an algorithm that was originally
classified as secret
• Skipjack was later declassified in 1998

Steganography
• Steganography is the science of hidden communication
• Hides the fact that communication is taking place
• The first use of steganography was documented by the ancient Greek
historian Herodotus in the Histories of Herodotus. Herodotus described
shaving a slave’s head, tattooing instructions on it, waiting for the hair to grow
back, and sending the slave across enemy lines.
• Modern steganography hides information inside data files, such as images
• Messages that are hidden via steganography are often encrypted first,
providing both confidentiality of the data and secrecy of the communication

DigitalWatermarks
• Digital Watermarks encode data into a file
• The watermark may be hidden, using steganography
• Good story from the book…
An example of real-world digital watermark use is the watermarking of DVDs by the Academy of Motion Picture Arts and
Sciences. Members of the academy (who decide the recipients of Oscar awards) receive DVD “screeners” of nominated films.
The films are often still being shown in movie theaters and not yet available on DVD (publicly).When the DVD system was first
implemented, illegal copies of the screeners would appear on peer-to-peer filesharing networks. These copies were “ripped”
(digitally copied) from the screeners. In response, the Academy of Motion Picture Arts and Sciences began watermarking each
screener. Each DVD is customized for the recipient: every frame of every DVD contains a hidden watermark, tying the DVD to
the recipient. Should the DVD appear on a P2P network, the academy can track the copy down the source DVD (and member
who received it). In 2007,Salvador Nunez Jr. was arrested for posting the movie Flushed Away online, copied from an academy
screener. Investigators used the watermark to track the copy to a screener received by his sister, who was a member of the
academy.

We’re done with Encryption!
Now onto Physical Security…
Remember our definition of information security:
The application of administrative, physical, and technical
controls to protect the confidentiality, integrity, and availability of
information.

Physical Security – Unique Terms and Definitions
• Mantrap - A preventive physical control with two doors. Each door
requires a separate form of authentication to open
• Bollard—A post designed to stop a car, typically deployed in front of
building entrances
• Smart card—A physical access control device containing an integrated
circuit
• Tailgating—Following an authorized person into a building without
providing credentials

Physical Security – Introduction
• Physical assets: people, buildings, systems, and data
• CISSP® exam considers human safety as the most critical
concern of this domain - trumps all other concerns
• Physical security protects against threats such as unauthorized
access and disasters, both man-made and natural

Physical Security
Perimeter Defenses
• Help prevent, detect, and correct unauthorized physical access
• Should employ defense-in-depth
• Fences, doors, walls, locks, etc.
Fences
• May range from deterrents (such as 3-foot/1 meter-tall fencing) to preventive
devices (8-foot/2.4 meter)
• Should be designed to steer ingress and egress to controlled points, such as
exterior doors and gates

Physical Security
Gates
• Range in strength from ornamental (a class I gate designed to deter access) to a class IV gate designed
to prevent a car from crashing through (such as gates at airports and prisons)
• ASTM International's “ASTM F2200” Standard Specification for Automated Vehicular Gate Construction at
http://www.astm.org/Standards/F2200.htm
• Types of Vehicle Gates:
• Class I Residential (home use)
• Class II Commercial/General Access (parking garage)
• Class III Industrial/Limited Access (loading dock for 18-wheeler trucks)
• Class IV Restricted Access (airport or prison)
• Gates should be placed at controlled points at the perimeter - Secure sites use fences and topography to
steer traffic to these points.

Physical Security
Bollards
• A traffic bollard is a strong post designed to stop a car
• Term derives from the short/strong posts (called mooring bollards) used to tie
ships to piers when docked
• Often installed in front of convenience stores, to prevent a confused driver who
mixes up the accelerator and brake from driving into the store.
• Used in secure facilities to prevent cars from entering (whether intentionally or
not)
• Can use large concrete planters for the same effect
• Usually placed in front of physically weak areas of a building, such as entryways

Physical Security
Lights
• Can act as both a detective and deterrent control
• Criminals will usually favor a poorly lighted target over a more visible one
• Should be bright enough to illuminate the desired field of vision (the area being protected)
• Fresnel (pronounced fray-NELL) lights - Same type originally used in lighthouses, use
Fresnel lenses to aim light in a specific direction
• Light measurement:
• Lumen, the amount of light one candle creates
• Footcandles;one footcandle is one lumen per square foot
• Lux, based on the metric system, more commonly used now: one lux is one lumen per square meter.

Physical Security
CCTV
• Closed Circuit Television (CCTV)
• Detective device used to aid in detecting the presence of
intruders in restricted areas
• Can also be used as a deterrent device/control
• CCTVs using the normal light spectrum require sufficient
visibility to illuminate the field of view

Physical Security
CCTV
• Infrared devices can “see in the dark” by displaying heat
• Older “tube cameras” are analog devices
• Modern cameras use CCD (Charged Couple Discharge), which is digital
• Cameras have mechanical irises that act as human irises, controlling the amount of light that
enters the lens by changing the size of the aperture
• Key issues include depth of field (the area that is in focus) and field of view (the entire area
viewed by the camera)
• More light allows a larger depth of field because a smaller aperture places more of the
image in focus
• A wide aperture (used in lower light conditions) lowers the depth of field

Physical Security
• Features such as pan and tilt (moving horizontally and vertically)
• Displays may display:
• Fixed camera view
• Autoscan (show a given camera for a few seconds before moving to the next)
• Multiplexing (where multiple camera feeds are fed into one display)
• Magnetic tape such as VHS is used to back up images from tube cameras
• CCD cameras use DVR (Digital Video Recorder) or NVR (Network Video
Recorder) for backups
• NVR has the advantage of allowing centralized storage of all video data

Physical Security
CCTV
• Features such as pan and tilt (moving horizontally and vertically)
• Displays may display:
• Fixed camera view
• Autoscan (show a given camera for a few seconds before moving to the next)
• Multiplexing (where multiple camera feeds are fed into one display)
• Magnetic tape such as VHS is used to back up images from tube cameras
• CCD cameras use DVR (Digital Video Recorder) or NVR (Network Video Recorder)
for backups
• NVR has the advantage of allowing centralized storage of all video data

Physical Security - Locks
• Preventive physical security control
• Used on doors and windows to prevent unauthorized physical access
• May be mechanical, such as key locks or combination locks
• May be electronic - often used with smart cards or magnetic stripe cards
Key locks
• Require a physical key to unlock
• Keys may be shared or sometimes copied, which lowers the accountability of key locks
• A common type is the pin tumbler lock, which has two sets of pins: driver pins and key pins.
• The correct key makes the pins line up with the shear line, allowing the lock tumbler (plug)
to turn

Key locks
• Using an incorrect key results in misaligned pins, jamming the lock plug
• Ward or Warded locks must turn a key through channels (called wards); a
“skeleton key” is designed to open varieties of warded locks
• A spring-bolt lock is a locking mechanism which “springs” in and out of the
door jamb
• The door may be closed with the spring bolt exposed
• A deadbolt is rigid; the door cannot be closed when the deadbolt is unlocked
• Both spring-bolt and deadbolts extend into the strike plate in the door jamb

Lock Picking
• The art of opening a lock without a key
• A set of lock picks can be used to lift the pins in a pin tumbler lock, allowing
the attacker to open the lock without a key
• A technique called lock bumping uses a shaved-down key which will
physically fit into the lock.The attacker inserts the shaved key and “bumps”
the exposed portion (sometimes with the handle of a screwdriver).This causes
the pins to jump, and the attacker quickly turns the key and opens the lock.
• All key locks can be picked or bumped: the only question is how long it will
take

Master and Core Keys
• Opens any lock for a given security zone in a building
• Access to the master key should be tightly controlled
• Core keys are used to remove the lock core in interchangeable core locks
(where the lock core may be easily removed and replaced with another core)
• Once the lock core is removed, the door may often be opened with a screwdriver
• Functional equivalent to the master key, core keys should be kept equally secure

Combination Locks
• Have dials that must be turned to specific numbers, in a specific order (alternating clockwise and counterclockwise
turns) to unlock
• A weak form of physical access control for production environments such as data centers
• Button or keypad locks also use numeric combinations
• Limited accountability due to shared combinations
• Button or keypad locks are also vulnerable because prolonged use can cause wear on the most used buttons or keys
• Combinations may be discovered via a brute-force attack, where every possible combination is attempted
• Locks may also be compromised via shoulder surfing
• Simple locks such as pushbutton locks with limited combinations do not qualify as preventive devices; they are deterrent
ONLY
• Can be used for low-security applications such as locking an employee restroom, but should not be used to protect
sensitive data or assets

Physical Security
Smart Cards and Magnetic Stripe Cards
• A physical access control device which is often
used for electronic locks, credit card purchases,
or dual-factor authentication systems
• “Smart” means the card contains a computer
circuit
• Smart card is also known as “Integrated Circuit
Card” (ICC).
• May be “contact” or “contactless”

Physical Security
• Contact cards must be inserted into a smart card reader
• Contactless cards are read wirelessly
• One type of contactless card technology is Radio-Frequency Identification (RFID)
• Contain RFID tags (also called transponders) which are read by RFID transceivers
• Magnetic stripe card contains a magnetic stripe which stores information
• Passive devices that contain no circuits
• Sometimes called swipe cards: they are used by swiping through a card reader
• Many international credit cards are smart cards, while magnetic stripe cards are
more commonly used as credit cards in the United States

Physical Security
• The “Common Access Card” (CAC) is an example of a worldwide smart card deployment by
the U.S. Department of Defense (DoD)
• Used for physical access control, to provide dual-factor authentication to critical systems, to
digitally sign documents, and others
• CAC cards store data including cryptographic certificates as part of the DoD's Public Key
Infrastructure (PKI)
• Both smart and magnetic stripe may be used in combination with electronic locks to provide
physical access control
• Better accountability when compared with mechanical locks: audit data can be collected
electronically

Physical Security
Tailgating/piggybacking
• Occurs when an unauthorized person follows an authorized person into
a building after the authorized person unlocks and opens the door
• Policy should forbid employees from allowing tailgating and security
awareness efforts
• Attackers attempting to tailgate often combine social engineering
techniques, such as carrying large boxes, increasing the chances an
authorized user will “help out” by holding the door open

Physical Security
Mantraps and Turnstiles
• Mantraps are a preventive physical control with two doors
• The first door must close and lock before the second door may be opened
• Each door typically requires a separate form of authentication to open
• The intruder is trapped between the doors after entering the mantrap
• Turnstiles are designed to prevent tailgating by enforcing a “one person per authentication”
rule
• Secure data centers may use floor-to-ceiling turnstiles with interlocking blades to prevent an
attacker from going over or under the turnstile
• Both mantraps and turnstiles must be designed to allow safe egress in case of emergency
• No system should require authentication for egress during emergencies

Physical Security
Contraband Checks
• Seek to identify objects that are prohibited to enter a secure perimeter
(such as an airplane)
• Secure buildings such as government or military buildings may employ
contraband checks
• Often used to detect metals, weapons, or explosives
• May also be used to detect controlled substances such as illegal drugs,
portable cameras or storage media

Physical Security
Motion Detectors and Other Perimeter Alarms
• Ultrasonic and microwave motion detectors work like “Doppler radar”
used to predict the weather
• A wave of energy is sent out, and the “echo” is returned when it bounces
off an object
• A motion detector that is 20 ft away from a wall will consistently receive an
echo in the time it takes for the wave to hit the wall and bounce back to the
receiver, for example.The echo will be returned more quickly when a new
object (such as a person walking in range of the sensor) reflects the wave
• Active sensors - means they actively send energy

Physical Security
• A photoelectric motion sensor sends a beam of light across a monitored
space to a photoelectric sensor
• The sensor alerts when the light beam is broken
• Also an active sensor
• A passive sensor is a “read-only” device; example is a passive infrared
(PIR) sensor that detects infrared energy created by body heat.

Physical Security
• Perimeter alarms include magnetic door and window alarms
• Include matched pairs of sensors on the wall, as well as window/door
• An electrical circuit flows through the sensor pairs as long as the door or
window is closed; the circuit breaks when either is opened
• Often armed for secured areas as well as in general areas during off hours
such as nights or weekends
• Once armed, a central alarm system will alert when any door or window is
opened

Physical Security
Doors and Windows
• Attackers will often target the “weakest link in the chain”
• Examples of “weakest link” design include a concrete wall with a
hollow-core door, or a gypsum wall with a steel door.
• Door hinges should face inward, or be otherwise protected
• Doors with internal motion sensors should never include mail
slots

Physical Security
Doors and Windows
• Externally-facing emergency doors should be marked for emergency use only and
equipped with panic bars.The use of a panic bar should trigger an alarm.
• Glass windows are structurally weak and can be dangerous when shattered. Bullet-
proof or explosive-resistant glass can be used for secured areas.Wire mesh or
security film can lower the danger of shattered glass and provide additional
strength. Use of simple glass windows in a secure perimeter requires a
compensating control such as window burglar alarms.
• Alternatives to glass windows include polycarbonate such as Lexan and acrylic
such as Plexiglass. Lexan is used in race cars and airplanes for is strength and
shatter resistance.

Physical Security
Walls, floors, and ceilings
• Walls around any internal secure perimeter such as a data center should be “slab to slab”
• Raised floors and drop ceilings can obscure where the walls truly start and stop
• Any wall protecting a secure perimeter (whether internal or external) should be strong
enough to resist cutting
• Simple gypsum “sheetrock” walls can be cut open with a sharp tool such as a carpet knife,
and should not be used for secure perimeters
• Walls should have an appropriate fire rating (the amount of time required to fail due to a fire)
• The National Fire Protection Agency (NFPA) 75: Standard for the Protection of Information Technology Equipment states “The computer
room shall be separated from other occupancies within the building by fire-resistant rated walls, floor, and ceiling constructed of
noncombustible or limited combustible materials. The fire resistant rating shall be commensurate with the exposure, but not less than
one hour.”

Physical Security
Guards
• A dynamic control
• May aid in inspection of access credentials, monitor CCTVs, monitor environmental controls,
respond to incidents, act as a deterrent (all things being equal, criminals are more likely to
target an unguarded building over a guarded building), and more
• Professional guards have attended advanced training and/or schooling; amateur guards
(sometimes derogatively called “Mall Cops”) have not
• Term “pseudo guard” means an unarmed security guard
• Guard's orders should be complete and clear
• Guards are often attacked via social engineering, so this threat should be directly addressed
via security awareness and training.

Physical Security
Dogs
• Often used in controlled areas, such as between the exterior building
wall and a perimeter fence
• Primarily serve as both deterrent and detective controls
• A site without dogs is more likely to be physically attacked than a site
with dogs (deterrent), and dogs alert security guards through barking
(detective)
• The primary drawback to using dogs as a perimeter control is legal
liability

Physical Security
Site selection, design, and configuration
• Describes the process of building a secure facility such as a data center,
from the site selection process through the final design
• The exam could pose a scenario where you are asked about any part of
the site selection process, beginning with the land the data center will
be built on
• Site selection is the “greenfield” process of choosing a site to construct
a building or data center. A “greenfield” is an undeveloped lot of land.

Physical Security
Topography
• The physical shape of the land: hills, valleys, trees, etc.
• Highly secure sites such as military installations will leverage (and sometimes alter) the topography of
the site as a defensive measure
• Can be used to steer ingress and egress to controlled points
Utility Reliability
• Electrical outages are among the most common of all failures and disasters
• Uninterruptible Power Supplies (UPSs) will provide protection against electrical failure for a short period
(usually hours or less)
• Generators provide longer protection, but will require refueling in order to operate for extended
periods.

Physical Security
Crime
• Local crime rates also factor into site selection
• The primary issue is employee safety: all employees have the
right to a safe working environment
• Additional issues include theft of company assets

Physical Security
Site Design and Configuration Issues
Site design cannot compensate for poor site selection decisions
Site Marking
• Data centers are not externally marked
• Attention-avoiding details such as muted building design
The Netflix DVD service avoids site marking of its service centers, which look like nondescript warehouses in
regular office parks.There are no Netflix signs or corporate logos to be seen.
Assuming a low profile avoids drawing unwanted attention to the warehouses, which adds defense-in-depth
protection to the valuable contents inside. As an additional bonus, this encourages subscribers to return DVDs
via postal mail (as opposed to attempting to return DVDs by dropping them off in person).

Physical Security
Shared Tenancy and Adjacent Buildings
• Other tenants in a building can pose security issues: they are already behind the physical security
perimeter
• Their physical security controls will impact yours: a tenant's poor visitor security practices can endanger
your security
• Adjacent buildings pose a similar risk
• Attackers can enter a less secure adjacent building and use that as a base to attack an adjacent building,
often breaking in through a shared wall
• Many bank heists have been pulled off this way; including the theft of over $20 million dollars from British
Bank of the Middle East in 1976 (the attackers blasted a hole through the shared wall of an adjacent
church) http://www.dailymail.co.uk/home/moslive/article-459185/Soldiers-Fortune.html
• Another security risk associated with shared tenancy (or neighbors who are physically close) is wireless
security

Physical Security
Shared Demarc
• demarc (the demarcation point, where the ISP's (Internet Service Provider)
responsibility ends and the customer's begins)
• Most buildings have one demarc area, where all external circuits enter the
building
• Should employ strong physical access control, including identifying,
authenticating, and authorizing all access
• For very secure sites, construction of multiple segregated demarcs is
recommended.

Physical Security
System Defenses
• One of the last lines of defense in a defense-in-depth strategy
• Assume an attacker has physical access to a device or media containing sensitive information
Asset Tracking
• You cannot protect your data unless you know where (and what) it is
• Data such as serial numbers and model numbers are useful in cases of loss due to theft or disaster.
Port Controls
• Computers may contain multiple “ports” which may allow copying data to or from a system
• USB drives can be small (some are smaller than a piece of chewing gum) and inexpensive and may hold dozens of gigabytes or more
• Small enough to evade perimeter contraband checks
• Ports can be physically disabled
• Ports may also be electronically locked via system policy

Physical Security
Drive and Tape Encryption
• Drive and tape encryption protect data at rest
• One of the few controls which will protect data after physical security has been
breached
• Recommended for all mobile devices and media containing sensitive information
which may physically leave a site or security zone
• Whole-disk encryption of mobile device hard drives is recommended
• Disk encryption/decryption may occur in software or hardware
• Many breach notification laws concerning Personally Identifiable Information (PII)
contain exclusions for lost data that is encrypted

Physical Security
Media Storage and Transportation
• All sensitive backup data should be stored offsite, whether transmitted offsite via
networks, or physically moved as backup media
• Sites using backup media should follow strict procedures for rotating media offsite
• Always use bonded and insured company for offsite media storage
• The company should employ secure vehicles and store media at a secure site
• Ensure that the storage site is unlikely to be impacted by the same disaster that
may strike the primary site, such as a flood, earthquake, or fire
• Never use informal practices, which as storing backup media at employee's houses

Physical Security
Media Cleaning and Destruction
• All forms of media should be securely cleaned or destroyed before disposal to prevent
object reuse
• Objects may be physical (such as paper files in manila folders) or electronic (data on a hard
drive)
• Attacks range from nontechnical attacks such as dumpster diving (searching for information
by rummaging through unsecured trash) to technical attacks such as recovering information
from unallocated blocks on a disk drive
• All cleaning and destruction actions should follow a formal policy, and all such activity
should be documented, including the serial numbers of any hard disks, type of data they
contained, date of cleaning or destruction, and personnel performing these actions

Physical Security
Environmental Controls
• Designed to provide a safe environment for personnel and equipment
• Power, HVAC, and fire safety are considered environmental controls
Electricity
• Reliable electricity is critical for any data center
• One of the top priorities when selecting, building, and designing a site

Physical Security
Types of Electrical Faults
• All types of electrical faults can impact availability and integrity
• The following are common types of electrical faults:
• Blackout: prolonged loss of power
• Brownout: prolonged low voltage
• Fault: short loss of power
• Surge: prolonged high voltage
• Spike: temporary high voltage
• Sag: temporary low voltage
 Memorize

Physical Security
Surge Protectors, UPSs, and Generators
Provide protection against electrical failures
Surge Protectors
• Protect equipment from damage due to electrical surges
• Contain a circuit or fuse which is tripped during a power spike or surge, shorting the power or regulating it down to
acceptable levels
Uninterruptible Power Supplies
• Provide temporary backup power in the event of a power outage
• May also “clean” the power, protecting against surges, spikes, and other forms of electrical faults
• Backup power is provided via batteries or fuel cells
• Provide power for a limited period of time, and can be used as a bridge to generator power; generators typically take a
short period of time to start up and begin providing power

Physical Security
Surge Protectors, UPSs, and Generators
Provide protection against electrical failures
Generators
• Designed to provide power for longer periods of times than UPSs
• Will run as long as fuel is available
• Sufficient fuel should be stored onsite for the period the generator is expected to provide power
• Refueling strategies should consider a disaster's effect on fuel supply and delivery
• Generators should not be placed in areas which may flood or otherwise be impacted by weather events
• Should be tested and serviced regularly.
• http://www.cumminspower.com/www/literature/technicalpapers/PT-7006-Standby-Katrina-en.pdf

Physical Security
EMI
• All electricity generates magnetism, so any electrical conductor emits
Electromagnetic Interference (EMI)
• Network cables that are poorly shielded or run too closely together may
suffer crosstalk, where magnetism from one cable “crosses” over to
another nearby cable
• Crosstalk can be mitigated via proper network cable management
• Never route power cables close to network cables

Physical Security
HVAC
• Keep the air at a reasonable temperature and humidity
• Operate in a closed loop, recirculating treated air (helps reduce dust and other airborne contaminants)
Positive Pressure and Drains
• All HVAC units should employ positive pressure and drainage
• Means air and water should be expelled from the building
• Untreated air should never be “inhaled” into the building, and water should drain away from the building
• A common malfunction of HVAC units is condensation of water pooling into the building, often going
under raised floors where it may not be detected
• Positive drains are designed to avoid this problem
• Location of all gas and water lines, as well as all drains, should be formally documented.

Physical Security
Heat and Humidity
• Humidity levels of 40-55% are recommended
• A commonly recommended “set point” temperature range for a data center is 68-77 °F (20-25 °C)
• With sufficient data center airflow, higher temperatures can be used
• Can result in energy savings; however, the data center may heat to dangerous levels more quickly in the event
of HVAC failure
Note - Many sources cite 68-72 °F (20-22 °C) as the optimum data center temperature range; in 2004, the
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) recommended up to 77
°F/25 °C.
• (Green) As a result, the 2008 ASHRAE recommendations allow a much wider range: temperature of 18 °C
(64.4 °F) to 27 °C (80.6 °F) and humidity from 25% to 60%, depending on the dew point. Higher set points
require adequate airflow. Details may be found at http://tc99.ashraetcs.org

Physical Security
Static and Corrosion
• Sudden static discharge can cause damage from system reboots to chip or disk
damage
• Static is mitigated by maintaining proper humidity, proper grounding all circuits in
a proper manner, and using antistatic sprays, wrist straps, and work surfaces
• Personnel working with sensitive computer equipment such as boards, modules, or
memory chips should ground themselves before performing any work.
• High humidity levels can allow the water in the air to condense onto (and into)
equipment, which may lead to corrosion.
• Both static and corrosion are mitigated by maintaining proper humidity levels.

Physical Security
Airborne Contaminants
• Dust is a common problem: airborne dust particles can be drawn into
computer enclosures, where they become trapped
• Built-up dust can cause overheating and static buildup
• CPU fans can be impeded by dust buildup, which can lead to CPU
failure due to overheating
• Other contaminants can cause corrosion or damaging chemical
reactions.

Physical Security
Heat, Flame, and Smoke Detectors
• Three methods for detecting fire
• Typically alert locally, and may also be centrally monitored by a fire alarm system
• An audible alarm and flashing lights should be used, so that both deaf and blind
personnel will be aware of the alarm
Heat Detectors
• Alert when temperature exceeds an established safe baseline
• May trigger when a specific temperature is exceeded or when temperature
changes at a specific rate (such as “10 °F in less than 5 minutes”)

Physical Security
Smoke Detectors
• Work through two primary methods: ionization and photoelectric
• Ionization-based smoke detectors contain a small radioactive source which creates a small electric charge
• Photoelectric sensors work in a similar fashion, except that they contain an LED (Light Emitting Diode) and a
photoelectric sensor that generates a small charge while receiving light
• Both types of alarm alert when smoke interrupts the radioactivity or light,lowering or blocking the electric charge
• Dust should always be avoided in data centers. Small airborne dust particles can trigger smoke detectors just as smoke
does, leading to false alarms.
Flame Detectors
• Detect infrared or ultraviolet light emitted in fire
• One drawback to this type of detection is that the detector usually requires line-of-site to detect the flame; smoke
detectors do not have this limitation

Physical Security
Safety Training and Awareness
• Training provides a skill set such as learning to operate an emergency power system
• Awareness changes user behavior (“Don't let anyone follow you into the building after you
swipe your access card”)
Evacuation Routes
• Evacuation routes should be prominently posted
• All personnel should be advised of the quickest evacuation route from their areas
• Guests should be advised of evacuation routes as well
• All sites should use a meeting point, where all personnel will meet in the event of emergency

Physical Security
Evacuation Roles and Procedures
• The two primary evacuation roles are safety warden and meeting point leader
• The safety warden ensures that all personnel safely evacuate the building in the
event of an emergency or drill
• The meeting point leader assures that all personnel are accounted for at the
emergency meeting point
• Special care should be given to any personnel with handicaps, which could affect
egress during an emergency
• Elevators should never be used during a fire
• All sites should have mitigating controls to allow safe egress for all personnel

Physical Security
ABCD Fires and Suppression
• Fire suppression systems are used to extinguish fires
• Different types of fires require different suppressive agents
• Class K fires are kitchen fires, such as burning oil or grease.Wet
chemicals are used to extinguish class K fires.

Physical Security
Types of Fire Suppression Agents
• Always consult local fire code before implementing a fire suppression system
• All fire suppression agents work via four methods (sometimes in combination):
• reducing the temperature of the fire,
• reducing the supply of oxygen,
• reducing the supply of fuel,
• interfering with the chemical reaction within fire

Physical Security
Water
• Suppresses fire by lowering the temperature below the kindling point
(also called the ignition point)
• Safest of all suppressive agents, and recommended for extinguishing
common combustible fires such as burning paper or wood
• It is important to cut electrical power when extinguishing a fire with
water to reduce the risk of electrocution

Physical Security
Soda Acid
• Old giant brass fire extinguishers
• Suppress fire by lowering temperature, soda acid also has additional
suppressive properties beyond plain water: it creates foam which can
float on the surface of some liquid fires, starving the oxygen supply

Physical Security
Dry Powder
• Dry powder (such as sodium chloride) works by lowering
temperature and smothering the fire, starving it of oxygen.
• Dry powder is primarily used to extinguish metal fires
(flammable metals include sodium, magnesium, and many others)

Physical Security
CO2
• Fires may be smothered by removing the oxygen: this is how CO2 fire suppression works.
• A risk associated with CO2 is it is odorless and colorless, and our bodies will breathe it as
air. By the time we begin suffocating due to lack of oxygen, it is often too late.
• CO2 is dangerous suppressive agent, which is only recommended in unstaffed areas such as
electrical substations
• Any personnel entering a CO2-protected area should be trained for CO2 safety; additional
safety controls (such as oxygen tanks) are usually recommended

Physical Security
Halon and Halon Substitutes
• Extinguishes fire via a chemical reaction that consumes energy and lowers the temperature of the fire
• Halon is being phased out, and a number of replacements with similar properties are now used
Montreal Accord
• Halon has ozone-depleting properties
• The 1989 Montreal Protocol (formally called the “Montreal Protocol on Substances That Deplete the Ozone Layer”)
banned production and consumption of new halon in developed countries by January 1, 1994.
• Existing halon systems may be used.While new halon is not being produced, recycled halon may be used
• There are exceptions for certain critical uses, such as airplanes and submarines. See http://ozone.unep.org for more
information on the Montreal Protocol.

Physical Security
Halon Replacements
Recommended replacements for halon include the following systems:
• Argon
• FE-13
• FM-200
• Inergen
FE-13 is the newest of these agents, and comparatively safe. It may be breathed in concentrations
of up to 30%. Other halon replacements are typically only safe up to 10-15% concentration.

Physical Security
Sprinkler Systems
• All sprinkler systems should be combined with a fire alarm that alerts people to evacuate
• Safe evacuation is the primary goal of fire safety.
Wet Pipe
• Wet pipes have water right up to the sprinkler heads: the pipes are “wet.”
• The sprinkler head contains a metal (common in older sprinklers) or small glass bulb
designed to melt or break at a specific temperature
• The sprinkler head opens and water flows
• Each head will open independently as the trigger temperature is exceeded.

Physical Security
Wet Pipe
• Bulbs come in different colors, which indicate the ceiling temperature which will trigger the bulb to burst
and open the sprinkler head
• The colors used are
• orange (135 °F/57 °C),
• red (155 °F/68 °C),
• yellow (175 °F/79 °C),
• green (200 °F/93 °C),
• blue (286 °F/141 °C)
NFPA 13: Standard for the Installation of Sprinkler Systems describes the color conventions used for these
sprinkler heads. See: http://www.nfpa.org/aboutthecodes/AboutTheCodes.asp?DocNum=13

Physical Security
Pre-Action
• Combination of wet, dry, or deluge systems, and require two separate triggers to release
water
• Single interlock systems release water into the pipes when a fire alarm triggers
• The water releases once the head opens
• Double interlock systems use compressed air (same as dry pipes): the water will not fill the
pipes until both the fire alarm triggers and the sprinkler head opens
• Preaction systems are used in areas such as museums, where accidental discharge would be
expensive.
• Double-interlock systems are used in cold areas such as freezers to avoid frozen pipes

Physical Security
Portable Fire Extinguishers
• Should be marked with the type of fire they are designed to extinguish
• Should be small enough to be operated by any personnel who may need to use
one
• Use the “PASS” method to extinguish a fire with a portable fire extinguisher:
• Pull the pin
• Aim low
• Squeeze the pin
• Sweep the fire

We made it through Class #5!
HOLY MOLY! That was a long Domain with a lot of information!
Please try to catch up in your reading.You’ve got the weekend and a day
off next week.
• We left off on page 212 in the book.
• Tuesday (5/1) gets technical.
• Come with questions!
Have a great evening, talk to you Tuesday!

2018 FRSecure CISSP Mentor Program- Session 5

More Related Content

What's hot (20)

Similar to 2018 FRSecure CISSP Mentor Program- Session 5 (20)

More from FRSecure (15)

Recently uploaded (20)

2018 FRSecure CISSP Mentor Program- Session 5