Abs guide
0 likes219 views
This document is the Advanced Bash Scripting Guide which provides an in-depth exploration of shell scripting using Bash. It assumes no previous knowledge and progresses from basic to intermediate/advanced topics through examples and exercises. The guide can be used as a textbook for learning shell scripting.
![Chapter 1. Shell Programming!
No programming language is perfect. There is
not even a single best language; there are only
languages well suited or perhaps poorly suited
for particular purposes.
--Herbert Mayer
A working knowledge of shell scripting is essential to anyone wishing to become reasonably proficient at
system administration, even if they do not anticipate ever having to actually write a script. Consider that as a
Linux machine boots up, it executes the shell scripts in /etc/rc.d to restore the system configuration and
set up services. A detailed understanding of these startup scripts is important for analyzing the behavior of a
system, and possibly modifying it.
The craft of scripting is not hard to master, since the scripts can be built in bite-sized sections and there is only
a fairly small set of shell-specific operators and options [1] to learn. The syntax is simple and straightforward,
similar to that of invoking and chaining together utilities at the command line, and there are only a few "rules"
governing their use. Most short scripts work right the first time, and debugging even the longer ones is
straightforward.
In the 1970s, the BASIC language enabled anyone reasonably computer
to write programs on an early generation of microcomputers. Decades
scripting language enables anyone with a rudimentary knowledge of L
on much more powerful machines.
A shell script is a quick-and-dirty method of prototyping a complex application. Getting even a limited subset
of the functionality to work in a script is often a useful first stage in project development. This way, the
structure of the application can be tested and played with, and the major pitfalls found before proceeding to
the final coding in C, C++, Java, Perl, or Python.
Shell scripting hearkens back to the classic UNIX philosophy of breaking complex projects into simpler
subtasks, of chaining together components and utilities. Many consider this a better, or at least more
esthetically pleasing approach to problem solving than using one of the new generation of high powered
all-in-one languages, such as Perl, which attempt to be all things to all people, but at the cost of forcing you to
alter your thinking processes to fit the tool.
According to Herbert Mayer, "a useful language needs arrays, pointers, and a generic mechanism for building
data structures." By these criteria, shell scripting falls somewhat short of being "useful." Or, perhaps not. . . .
When not to use shell scripts
• Resource-intensive tasks, especially where speed is a factor (sorting, hashing, recursion [2] ...)
• Procedures involving heavy-duty math operations, especially floating point arithmetic, arbitrary
precision calculations, or complex numbers (use C++ or FORTRAN instead)
• Cross-platform portability required (use C or Java instead)
Chapter 1. Shell Programming! 1](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-7-320.jpg)
![Advanced Bash-Scripting Guide
• Complex applications, where structured programming is a necessity (type-checking of variables,
function prototypes, etc.)
• Mission-critical applications upon which you are betting the future of the company
• Situations where security is important, where you need to guarantee the integrity of your system and
protect against intrusion, cracking, and vandalism
• Project consists of subcomponents with interlocking dependencies
• Extensive file operations required (Bash is limited to serial file access, and that only in a
particularly clumsy and inefficient line-by-line fashion.)
• Need native support for multi-dimensional arrays
• Need data structures, such as linked lists or trees
• Need to generate / manipulate graphics or GUIs
• Need direct access to system hardware
• Need port or socket I/O
• Need to use libraries or interface with legacy code
• Proprietary, closed-source applications (Shell scripts put the source code right out in the open for all
the world to see.)
If any of the above applies, consider a more powerful scripting language -- perhaps Perl, Tcl, Python, Ruby
-- or possibly a compiled language such as C, C++, or Java. Even then, prototyping the application as a
shell script might still be a useful development step.
We will be using Bash, an acronym for "Bourne-Again shell" and a pun on Stephen Bourne's now classic
Bourne shell. Bash has become a de facto standard for shell scripting on most flavors of UNIX. Most of the
principles this book covers apply equally well to scripting with other shells, such as the Korn Shell, from
which Bash derives some of its features, [3] and the C Shell and its variants. (Note that C Shell programming
is not recommended due to certain inherent problems, as pointed out in an October, 1993 Usenet post by Tom
Christiansen.)
What follows is a tutorial on shell scripting. It relies heavily on examples to illustrate various features of the
shell. The example scripts work -- they've been tested, insofar as was possible -- and some of them are even
useful in real life. The reader can play with the actual working code of the examples in the source archive
(scriptname.sh or scriptname.bash), [4] give them execute permission (chmod u+rx
scriptname), then run them to see what happens. Should the source archive not be available, then
cut-and-paste from the HTML or pdf rendered versions. Be aware that some of the scripts presented here
introduce features before they are explained, and this may require the reader to temporarily skip ahead for
enlightenment.
Unless otherwise noted, the author of this book wrote the example scripts that follow.
His countenance was bold and bashed not.
--Edmund Spenser
Chapter 1. Shell Programming! 2](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-8-320.jpg)
![Advanced Bash-Scripting Guide
# This script uses quite a number of features that will be explained
#+ later on.
# By the time you've finished the first half of the book,
#+ there should be nothing mysterious about it.
LOG_DIR=/var/log
ROOT_UID=0 # Only users with $UID 0 have root privileges.
LINES=50 # Default number of lines saved.
E_XCD=86 # Can't change directory?
E_NOTROOT=87 # Non-root exit error.
# Run as root, of course.
if [ "$UID" -ne "$ROOT_UID" ]
then
echo "Must be root to run this script."
exit $E_NOTROOT
fi
if [ -n "$1" ]
# Test whether command-line argument is present (non-empty).
then
lines=$1
else
lines=$LINES # Default, if not specified on command-line.
fi
# Stephane Chazelas suggests the following,
#+ as a better way of checking command-line arguments,
#+ but this is still a bit advanced for this stage of the tutorial.
#
# E_WRONGARGS=85 # Non-numerical argument (bad argument format).
#
# case "$1" in
# "" ) lines=50;;
# *[!0-9]*) echo "Usage: `basename $0` file-to-cleanup"; exit $E_WRONGARGS;;
# * ) lines=$1;;
# esac
#
#* Skip ahead to "Loops" chapter to decipher all this.
cd $LOG_DIR
if [ `pwd` != "$LOG_DIR" ] # or if [ "$PWD" != "$LOG_DIR" ]
# Not in /var/log?
then
echo "Can't change to $LOG_DIR."
exit $E_XCD
fi # Doublecheck if in right directory before messing with log file.
# Far more efficient is:
#
# cd /var/log || {
# echo "Cannot change to necessary directory." >&2
# exit $E_XCD;
# }
Chapter 2. Starting Off With a Sha-Bang 4](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-10-320.jpg)
![Advanced Bash-Scripting Guide
tail -n $lines messages > mesg.temp # Save last section of message log file.
mv mesg.temp messages # Becomes new log directory.
# cat /dev/null > messages
#* No longer needed, as the above method is safer.
cat /dev/null > wtmp # ': > wtmp' and '> wtmp' have the same effect.
echo "Logs cleaned up."
exit 0
# A zero return value from the script upon exit indicates success
#+ to the shell.
Since you may not wish to wipe out the entire system log, this version of the script keeps the last section of
the message log intact. You will constantly discover ways of fine-tuning previously written scripts for
increased effectiveness.
***
The sha-bang ( #!) [5] at the head of a script tells your system that this file is a set of commands to be fed to
the command interpreter indicated. The #! is actually a two-byte [6] magic number, a special marker that
designates a file type, or in this case an executable shell script (type man magic for more details on this
fascinating topic). Immediately following the sha-bang is a path name. This is the path to the program that
interprets the commands in the script, whether it be a shell, a programming language, or a utility. This
command interpreter then executes the commands in the script, starting at the top (the line following the
sha-bang line), and ignoring comments. [7]
#!/bin/sh
#!/bin/bash
#!/usr/bin/perl
#!/usr/bin/tcl
#!/bin/sed -f
#!/usr/awk -f
Each of the above script header lines calls a different command interpreter, be it /bin/sh, the default shell
(bash in a Linux system) or otherwise. [8] Using #!/bin/sh, the default Bourne shell in most commercial
variants of UNIX, makes the script portable to non-Linux machines, though you sacrifice Bash-specific
features. The script will, however, conform to the POSIX [9] sh standard.
Note that the path given at the "sha-bang" must be correct, otherwise an error message -- usually "Command
not found." -- will be the only result of running the script. [10]
#! can be omitted if the script consists only of a set of generic system commands, using no internal shell
directives. The second example, above, requires the initial #!, since the variable assignment line, lines=50,
uses a shell-specific construct. [11] Note again that #!/bin/sh invokes the default shell interpreter, which
defaults to /bin/bash on a Linux machine.
This tutorial encourages a modular approach to constructing a script. Make note of and collect
"boilerplate" code snippets that might be useful in future scripts. Eventually you will build quite an
extensive library of nifty routines. As an example, the following script prolog tests whether the script has
been invoked with the correct number of parameters.
E_WRONG_ARGS=85
Chapter 2. Starting Off With a Sha-Bang 5](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-11-320.jpg)
![Advanced Bash-Scripting Guide
script_parameters="-a -h -m -z"
# -a = all, -h = help, etc.
if [ $# -ne $Number_of_expected_args ]
then
echo "Usage: `basename $0` $script_parameters"
# `basename $0` is the script's filename.
exit $E_WRONG_ARGS
fi
Many times, you will write a script that carries out one particular task. The first script in this chapter is
an example. Later, it might occur to you to generalize the script to do other, similar tasks. Replacing the
literal ("hard-wired") constants by variables is a step in that direction, as is replacing repetitive code
blocks by functions.
2.1. Invoking the script
Having written the script, you can invoke it by sh scriptname, [12] or alternatively bash
scriptname. (Not recommended is using sh <scriptname, since this effectively disables reading from
stdin within the script.) Much more convenient is to make the script itself directly executable with a chmod.
Either:
chmod 555 scriptname (gives everyone read/execute permission) [13]
or
chmod +rx scriptname (gives everyone read/execute permission)
chmod u+rx scriptname (gives only the script owner read/execute permission)
Having made the script executable, you may now test it by ./scriptname. [14] If it begins with a
"sha-bang" line, invoking the script calls the correct command interpreter to run it.
As a final step, after testing and debugging, you would likely want to move it to /usr/local/bin (as root,
of course), to make the script available to yourself and all other users as a systemwide executable. The script
could then be invoked by simply typing scriptname [ENTER] from the command-line.
2.2. Preliminary Exercises
1. System administrators often write scripts to automate common tasks. Give several instances where
such scripts would be useful.
2. Write a script that upon invocation shows the time and date, lists all logged-in users, and gives the
system uptime. The script then saves this information to a logfile.
Chapter 2. Starting Off With a Sha-Bang 6](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-12-320.jpg)
![Chapter 3. Special Characters
What makes a character special? If it has a meaning beyond its literal meaning, a meta-meaning, then we refer
to it as a special character.
Special Characters Found In Scripts and Elsewhere
#
Comments. Lines beginning with a # (with the exception of #!) are comments and will not be
executed.
# This line is a comment.
Comments may also occur following the end of a command.
echo "A comment will follow." # Comment here.
# ^ Note whitespace before #
Comments may also follow whitespace at the beginning of a line.
# A tab precedes this comment.
Comments may even be embedded within a pipe.
initial=( `cat "$startfile" | sed -e '/#/d' | tr -d 'n' |
# Delete lines containing '#' comment character.
sed -e 's/./. /g' -e 's/_/_ /g'` )
# Excerpted from life.sh script
A command may not follow a comment on the same line. There is no method of
terminating the comment, in order for "live code" to begin on the same line. Use a new
line for the next command.
Of course, a quoted or an escaped # in an echo statement does not begin a comment.
Likewise, a # appears in certain parameter-substitution constructs and in numerical
constant expressions.
echo "The # here does not begin a comment."
echo 'The # here does not begin a comment.'
echo The # here does not begin a comment.
echo The # here begins a comment.
echo ${PATH#*:} # Parameter substitution, not a comment.
echo $(( 2#101011 )) # Base conversion, not a comment.
# Thanks, S.C.
The standard quoting and escape characters (" ' ) escape the #.
Certain pattern matching operations also use the #.
;
Command separator [semicolon]. Permits putting two or more commands on the same line.
echo hello; echo there
if [ -x "$filename" ]; then # Note the space after the semicolon.
Chapter 3. Special Characters 8](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-14-320.jpg)
![Advanced Bash-Scripting Guide
#+ ^^
echo "File $filename exists."; cp $filename $filename.bak
else # ^^
echo "File $filename not found."; touch $filename
fi; echo "File test complete."
Note that the ";" sometimes needs to be escaped.
;;
Terminator in a case option [double semicolon].
case "$variable" in
abc) echo "$variable = abc" ;;
xyz) echo "$variable = xyz" ;;
esac
;;&, ;&
Terminators in a case option (version 4+ of Bash).
.
"dot" command [period]. Equivalent to source (see Example 14-22). This is a bash builtin.
.
"dot", as a component of a filename. When working with filenames, a leading dot is the prefix of a
"hidden" file, a file that an ls will not normally show.
bash$ touch .hidden-file
bash$ ls -l
total 10
-rw-r--r-- 1 bozo 4034 Jul 18 22:04 data1.addressbook
-rw-r--r-- 1 bozo 4602 May 25 13:58 data1.addressbook.bak
-rw-r--r-- 1 bozo 877 Dec 17 2000 employment.addressbook
bash$ ls -al
total 14
drwxrwxr-x 2 bozo bozo 1024 Aug 29 20:54 ./
drwx------ 52 bozo bozo 3072 Aug 29 20:51 ../
-rw-r--r-- 1 bozo bozo 4034 Jul 18 22:04 data1.addressbook
-rw-r--r-- 1 bozo bozo 4602 May 25 13:58 data1.addressbook.bak
-rw-r--r-- 1 bozo bozo 877 Dec 17 2000 employment.addressbook
-rw-rw-r-- 1 bozo bozo 0 Aug 29 20:54 .hidden-file
When considering directory names, a single dot represents the current working directory, and two dots
denote the parent directory.
bash$ pwd
/home/bozo/projects
bash$ cd .
bash$ pwd
/home/bozo/projects
bash$ cd ..
bash$ pwd
/home/bozo/
The dot often appears as the destination (directory) of a file movement command, in this context
meaning current directory.
Chapter 3. Special Characters 9](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-15-320.jpg)
![Advanced Bash-Scripting Guide
bash$ cp /home/bozo/current_work/junk/* .
Copy all the "junk" files to $PWD.
.
"dot" character match. When matching characters, as part of a regular expression, a "dot" matches a
single character.
"
partial quoting [double quote]. "STRING" preserves (from interpretation) most of the special
characters within STRING. See Chapter 5.
'
full quoting [single quote]. 'STRING' preserves all special characters within STRING. This is a
stronger form of quoting than "STRING". See Chapter 5.
,
comma operator. The comma operator [15] links together a series of arithmetic operations. All are
evaluated, but only the last one is returned.
let "t2 = ((a = 9, 15 / 3))" # Set "a =
9" and "t2 = 15 / 3"
The comma operator can also concatenate strings.
for file in /{,usr/}bin/*calc
# ^ Find all executable files ending in "calc"
#+ in /bin and /usr/bin directories.
do
if [ -x "$file" ]
then
echo $file
fi
done
# /bin/ipcalc
# /usr/bin/kcalc
# /usr/bin/oidcalc
# /usr/bin/oocalc
# Thank you, Rory Winston, for pointing this out.
,, ,
Lowercase conversion in parameter substitution (added in version 4 of Bash).
escape [backslash]. A quoting mechanism for single characters.
X escapes the character X. This has the effect of "quoting" X, equivalent to 'X'. The may be used to
quote " and ', so they are expressed literally.
See Chapter 5 for an in-depth explanation of escaped characters.
/
Filename path separator [forward slash]. Separates the components of a filename (as in
/home/bozo/projects/Makefile).
This is also the division arithmetic operator.
`
command substitution. The `command` construct makes available the output of command for
assignment to a variable. This is also known as backquotes or backticks.
Chapter 3. Special Characters 10](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-16-320.jpg)
![Advanced Bash-Scripting Guide
:
null command [colon]. This is the shell equivalent of a "NOP" (no op, a do-nothing operation). It
may be considered a synonym for the shell builtin true. The ":" command is itself a Bash builtin, and
its exit status is true (0).
:
echo $? # 0
Endless loop:
while :
do
operation-1
operation-2
...
operation-n
done
# Same as:
# while true
# do
# ...
# done
Placeholder in if/then test:
if condition
then : # Do nothing and branch ahead
else # Or else ...
take-some-action
fi
Provide a placeholder where a binary operation is expected, see Example 8-2 and default parameters.
: ${username=`whoami`}
# ${username=`whoami`} Gives an error without the leading :
# unless "username" is a command or builtin...
Provide a placeholder where a command is expected in a here document. See Example 18-10.
Evaluate string of variables using parameter substitution (as in Example 9-16).
: ${HOSTNAME?} ${USER?} ${MAIL?}
# Prints error message
#+ if one or more of essential environmental variables not set.
Variable expansion / substring replacement.
In combination with the > redirection operator, truncates a file to zero length, without changing its
permissions. If the file did not previously exist, creates it.
: > data.xxx # File "data.xxx" now empty.
# Same effect as cat /dev/null >data.xxx
# However, this does not fork a new process, since ":" is a builtin.
See also Example 15-15.
In combination with the >> redirection operator, has no effect on a pre-existing target file (: >>
target_file). If the file did not previously exist, creates it.
Chapter 3. Special Characters 11](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-17-320.jpg)
![Advanced Bash-Scripting Guide
This applies to regular files, not pipes, symlinks, and certain special files.
May be used to begin a comment line, although this is not recommended. Using # for a comment
turns off error checking for the remainder of that line, so almost anything may appear in a comment.
However, this is not the case with :.
: This is a comment that generates an error, ( if [ $x -eq 3] ).
The ":" also serves as a field separator, in /etc/passwd, and in the $PATH variable.
bash$ echo $PATH
/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/sbin:/usr/sbin:/usr/games
!
reverse (or negate) the sense of a test or exit status [bang]. The ! operator inverts the exit status of
the command to which it is applied (see Example 6-2). It also inverts the meaning of a test operator.
This can, for example, change the sense of equal ( = ) to not-equal ( != ). The ! operator is a Bash
keyword.
In a different context, the ! also appears in indirect variable references.
In yet another context, from the command line, the ! invokes the Bash history mechanism (see
Appendix K). Note that within a script, the history mechanism is disabled.
*
wild card [asterisk]. The * character serves as a "wild card" for filename expansion in globbing. By
itself, it matches every filename in a given directory.
bash$ echo *
abs-book.sgml add-drive.sh agram.sh alias.sh
The * also represents any number (or zero) characters in a regular expression.
*
arithmetic operator. In the context of arithmetic operations, the * denotes multiplication.
** A double asterisk can represent the exponentiation operator or extended file-match globbing.
?
test operator. Within certain expressions, the ? indicates a test for a condition.
In a double-parentheses construct, the ? can serve as an element of a C-style trinary operator, ?:.
(( var0 = var1<98?9:21 ))
# ^ ^
# if [ "$var1" -lt 98 ]
# then
# var0=9
# else
# var0=21
# fi
In a parameter substitution expression, the ? tests whether a variable has been set.
?
wild card. The ? character serves as a single-character "wild card" for filename expansion in
globbing, as well as representing one character in an extended regular expression.
Chapter 3. Special Characters 12](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-18-320.jpg)
![Advanced Bash-Scripting Guide
$
Variable substitution (contents of a variable).
var1=5
var2=23skidoo
echo $var1 # 5
echo $var2 # 23skidoo
A $ prefixing a variable name indicates the value the variable holds.
$
end-of-line. In a regular expression, a "$" addresses the end of a line of text.
${}
Parameter substitution.
$*, $@
positional parameters.
$?
exit status variable. The $? variable holds the exit status of a command, a function, or of the script
itself.
$$
process ID variable. The $$ variable holds the process ID [16] of the script in which it appears.
()
command group.
(a=hello; echo $a)
A listing of commands within parentheses starts a subshell.
Variables inside parentheses, within the subshell, are not visible to the rest of the
script. The parent process, the script, cannot read variables created in the child
process, the subshell.
a=123
( a=321; )
echo "a = $a" # a = 123
# "a" within parentheses acts like a local variable.
array initialization.
Array=(element1 element2 element3)
{xxx,yyy,zzz,...}
Brace expansion.
echo "{These,words,are,quoted}" # " prefix and suffix
# "These" "words" "are" "quoted"
cat {file1,file2,file3} > combined_file
# Concatenates the files file1, file2, and file3 into combined_file.
cp file22.{txt,backup}
# Copies "file22.txt" to "file22.backup"
Chapter 3. Special Characters 13](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-19-320.jpg)
![Advanced Bash-Scripting Guide
A command may act upon a comma-separated list of file specs within braces. [17] Filename
expansion (globbing) applies to the file specs between the braces.
No spaces allowed within the braces unless the spaces are quoted or escaped.
echo {file1,file2} :{ A," B",' C'}
file1 : A file1 : B file1 : C file2 : A file2 : B file2 :
C
{a..z}
Extended Brace expansion.
echo {a..z} # a b c d e f g h i j k l m n o p q r s t u v w x y z
# Echoes characters between a and z.
echo {0..3} # 0 1 2 3
# Echoes characters between 0 and 3.
The {a..z} extended brace expansion construction is a feature introduced in version 3 of Bash.
{}
Block of code [curly brackets]. Also referred to as an inline group, this construct, in effect, creates
an anonymous function (a function without a name). However, unlike in a "standard" function, the
variables inside a code block remain visible to the remainder of the script.
bash$ { local a;
a=123; }
bash: local: can only be used in a
function
a=123
{ a=321; }
echo "a = $a" # a = 321 (value inside code block)
# Thanks, S.C.
The code block enclosed in braces may have I/O redirected to and from it.
Example 3-1. Code blocks and I/O redirection
#!/bin/bash
# Reading lines in /etc/fstab.
File=/etc/fstab
{
read line1
read line2
} < $File
echo "First line in $File is:"
echo "$line1"
echo
echo "Second line in $File is:"
echo "$line2"
Chapter 3. Special Characters 14](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-20-320.jpg)
![Advanced Bash-Scripting Guide
exit 0
# Now, how do you parse the separate fields of each line?
# Hint: use awk, or . . .
# . . . Hans-Joerg Diers suggests using the "set" Bash builtin.
Example 3-2. Saving the output of a code block to a file
#!/bin/bash
# rpm-check.sh
# Queries an rpm file for description, listing,
#+ and whether it can be installed.
# Saves output to a file.
#
# This script illustrates using a code block.
SUCCESS=0
E_NOARGS=65
if [ -z "$1" ]
then
echo "Usage: `basename $0` rpm-file"
exit $E_NOARGS
fi
{ # Begin code block.
echo
echo "Archive Description:"
rpm -qpi $1 # Query description.
echo
echo "Archive Listing:"
rpm -qpl $1 # Query listing.
echo
rpm -i --test $1 # Query whether rpm file can be installed.
if [ "$?" -eq $SUCCESS ]
then
echo "$1 can be installed."
else
echo "$1 cannot be installed."
fi
echo # End code block.
} > "$1.test" # Redirects output of everything in block to file.
echo "Results of rpm test in file $1.test"
# See rpm man page for explanation of options.
exit 0
Unlike a command group within (parentheses), as above, a code block enclosed by
{braces} will not normally launch a subshell. [18]
{}
placeholder for text. Used after xargs -i (replace strings option). The {} double curly brackets are a
placeholder for output text.
Chapter 3. Special Characters 15](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-21-320.jpg)
![Advanced Bash-Scripting Guide
ls . | xargs -i -t cp ./{} $1
# ^^ ^^
# From "ex42.sh" (copydir.sh) example.
anchor id="semicolonesc">
{} ;
pathname. Mostly used in find constructs. This is not a shell builtin.
The ";" ends the -exec option of a find command sequence. It needs to be escaped to
protect it from interpretation by the shell.
[]
test.
Test expression between [ ]. Note that [ is part of the shell builtin test (and a synonym for it), not a
link to the external command /usr/bin/test.
[[ ]]
test.
Test expression between [[ ]]. More flexible than the single-bracket [ ] test, this is a shell keyword.
See the discussion on the [[ ... ]] construct.
[]
array element.
In the context of an array, brackets set off the numbering of each element of that array.
Array[1]=slot_1
echo ${Array[1]}
[]
range of characters.
As part of a regular expression, brackets delineate a range of characters to match.
$[ ... ]
integer expansion.
Evaluate integer expression between $[ ].
a=3
b=7
echo $[$a+$b] # 10
echo $[$a*$b] # 21
Note that this usage is deprecated, and has been replaced by the (( ... )) construct.
(( ))
integer expansion.
Expand and evaluate integer expression between (( )).
See the discussion on the (( ... )) construct.
> &> >& >> < <>
redirection.
Chapter 3. Special Characters 16](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-22-320.jpg)
![Advanced Bash-Scripting Guide
scriptname >filename redirects the output of scriptname to file filename. Overwrite
filename if it already exists.
command &>filename redirects both the stdout and the stderr of command to filename.
This is useful for suppressing output when testing for a condition. For example, let us
test whether a certain command exists.
bash$ type bogus_command &>/dev/null
bash$ echo $?
1
Or in a script:
command_test () { type "$1" &>/dev/null; }
# ^
cmd=rmdir # Legitimate command.
command_test $cmd; echo $? # 0
cmd=bogus_command # Illegitimate command
command_test $cmd; echo $? # 1
command >&2 redirects stdout of command to stderr.
scriptname >>filename appends the output of scriptname to file filename. If
filename does not already exist, it is created.
[i]<>filename opens file filename for reading and writing, and assigns file descriptor i to it. If
filename does not exist, it is created.
process substitution.
(command)>
<(command)
In a different context, the "<" and ">" characters act as string comparison operators.
In yet another context, the "<" and ">" characters act as integer comparison operators. See also
Example 15-9.
<<
redirection used in a here document.
<<<
redirection used in a here string.
<, >
ASCII comparison.
Chapter 3. Special Characters 17](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-23-320.jpg)
![Advanced Bash-Scripting Guide
veg1=carrots
veg2=tomatoes
if [[ "$veg1" < "$veg2" ]]
then
echo "Although $veg1 precede $veg2 in the dictionary,"
echo -n "this does not necessarily imply anything "
echo "about my culinary preferences."
else
echo "What kind of dictionary are you using, anyhow?"
fi
<, >
word boundary in a regular expression.
bash$ grep '<the>' textfile
|
pipe. Passes the output (stdout of a previous command to the input (stdin) of the next one, or to
the shell. This is a method of chaining commands together.
echo ls -l | sh
# Passes the output of "echo ls -l" to the shell,
#+ with the same result as a simple "ls -l".
cat *.lst | sort | uniq
# Merges and sorts all ".lst" files, then deletes duplicate lines.
A pipe, as a classic method of interprocess communication, sends the stdout of one process to the
stdin of another. In a typical case, a command, such as cat or echo, pipes a stream of data to a
filter, a command that transforms its input for processing. [19]
cat $filename1 $filename2 | grep $search_word
For an interesting note on the complexity of using UNIX pipes, see the UNIX FAQ, Part 3.
The output of a command or commands may be piped to a script.
#!/bin/bash
# uppercase.sh : Changes input to uppercase.
tr 'a-z' 'A-Z'
# Letter ranges must be quoted
#+ to prevent filename generation from single-letter filenames.
exit 0
Now, let us pipe the output of ls -l to this script.
bash$ ls -l | ./uppercase.sh
-RW-RW-R-- 1 BOZO BOZO 109 APR 7 19:49 1.TXT
-RW-RW-R-- 1 BOZO BOZO 109 APR 14 16:48 2.TXT
-RW-R--R-- 1 BOZO BOZO 725 APR 20 20:56 DATA-FILE
The stdout of each process in a pipe must be read as the stdin of the next. If this
is not the case, the data stream will block, and the pipe will not behave as expected.
Chapter 3. Special Characters 18](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-24-320.jpg)
![Advanced Bash-Scripting Guide
cat file1 file2 | ls -l | sort
# The output from "cat file1 file2" disappears.
A pipe runs as a child process, and therefore cannot alter script variables.
variable="initial_value"
echo "new_value" | read variable
echo "variable = $variable" # variable = initial_value
If one of the commands in the pipe aborts, this prematurely terminates execution of the
pipe. Called a broken pipe, this condition sends a SIGPIPE signal.
>|
force redirection (even if the noclobber option is set). This will forcibly overwrite an existing file.
||
OR logical operator. In a test construct, the || operator causes a return of 0 (success) if either of the
linked test conditions is true.
&
Run job in background. A command followed by an & will run in the background.
bash$ sleep 10 &
[1] 850
[1]+ Done sleep 10
Within a script, commands and even loops may run in the background.
Example 3-3. Running a loop in the background
#!/bin/bash
# background-loop.sh
for i in 1 2 3 4 5 6 7 8 9 10 # First loop.
do
echo -n "$i "
done & # Run this loop in background.
# Will sometimes execute after second loop.
echo # This 'echo' sometimes will not display.
for i in 11 12 13 14 15 16 17 18 19 20 # Second loop.
do
echo -n "$i "
done
echo # This 'echo' sometimes will not display.
# ======================================================
# The expected output from the script:
# 1 2 3 4 5 6 7 8 9 10
# 11 12 13 14 15 16 17 18 19 20
# Sometimes, though, you get:
# 11 12 13 14 15 16 17 18 19 20
# 1 2 3 4 5 6 7 8 9 10 bozo $
# (The second 'echo' doesn't execute. Why?)
# Occasionally also:
Chapter 3. Special Characters 19](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-25-320.jpg)
![Advanced Bash-Scripting Guide
# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
# (The first 'echo' doesn't execute. Why?)
# Very rarely something like:
# 11 12 13 1 2 3 4 5 6 7 8 9 10 14 15 16 17 18 19 20
# The foreground loop preempts the background one.
exit 0
# Nasimuddin Ansari suggests adding sleep 1
#+ after the echo -n "$i" in lines 6 and 14,
#+ for some real fun.
A command run in the background within a script may cause the script to hang,
waiting for a keystroke. Fortunately, there is a remedy for this.
&&
AND logical operator. In a test construct, the && operator causes a return of 0 (success) only if both
the linked test conditions are true.
-
option, prefix. Option flag for a command or filter. Prefix for an operator. Prefix for a default
parameter in parameter substitution.
COMMAND -[Option1][Option2][...]
ls -al
sort -dfu $filename
if [ $file1 -ot $file2 ]
then # ^
echo "File $file1 is older than $file2."
fi
if [ "$a" -eq "$b" ]
then ^
echo "$a is equal to $b."
fi
if [ "$c" -eq 24 -a "$d" -eq 47 ]
then ^ ^
echo "$c equals 24 and $d equals 47."
fi
param2=${param1:-$DEFAULTVAL}
# ^
--
The double-dash -- prefixes long (verbatim) options to commands.
sort --ignore-leading-blanks
Used with a Bash builtin, it means the end of options to that particular command.
Chapter 3. Special Characters 20](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-26-320.jpg)
![Advanced Bash-Scripting Guide
This provides a handy means of removing files whose names begin with a dash.
bash$ ls -l
-rw-r--r-- 1 bozo bozo 0 Nov 25 12:29 -badname
bash$ rm -- -badname
bash$ ls -l
total 0
The double-dash is also used in conjunction with set.
set -- $variable (as in Example 14-18)
-
redirection from/to stdin or stdout [dash].
bash$ cat -
abc
abc
...
Ctl-D
As expected, cat - echoes stdin, in this case keyboarded user input, to stdout. But, does I/O
redirection using - have real-world applications?
(cd /source/directory && tar cf - . ) | (cd /dest/directory && tar xpvf -)
# Move entire file tree from one directory to another
# [courtesy Alan Cox <a.cox@swansea.ac.uk>, with a minor change]
# 1) cd /source/directory
# Source directory, where the files to be moved are.
# 2) &&
# "And-list": if the 'cd' operation successful,
# then execute the next command.
# 3) tar cf - .
# The 'c' option 'tar' archiving command creates a new archive,
# the 'f' (file) option, followed by '-' designates the target file
# as stdout, and do it in current directory tree ('.').
# 4) |
# Piped to ...
# 5) ( ... )
# a subshell
# 6) cd /dest/directory
# Change to the destination directory.
# 7) &&
# "And-list", as above
# 8) tar xpvf -
# Unarchive ('x'), preserve ownership and file permissions ('p'),
# and send verbose messages to stdout ('v'),
# reading data from stdin ('f' followed by '-').
#
# Note that 'x' is a command, and 'p', 'v', 'f' are options.
#
# Whew!
# More elegant than, but equivalent to:
Chapter 3. Special Characters 21](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-27-320.jpg)
![Advanced Bash-Scripting Guide
# cd source/directory
# tar cf - . | (cd ../dest/directory; tar xpvf -)
#
# Also having same effect:
# cp -a /source/directory/* /dest/directory
# Or:
# cp -a /source/directory/* /source/directory/.[^.]* /dest/directory
# If there are hidden files in /source/directory.
bunzip2 -c linux-2.6.16.tar.bz2 | tar xvf -
# --uncompress tar file-- | --then pass it to "tar"--
# If "tar" has not been patched to handle "bunzip2",
#+ this needs to be done in two discrete steps, using a pipe.
# The purpose of the exercise is to unarchive "bzipped" kernel source.
Note that in this context the "-" is not itself a Bash operator, but rather an option recognized by certain
UNIX utilities that write to stdout, such as tar, cat, etc.
bash$ echo "whatever" | cat -
whatever
Where a filename is expected, - redirects output to stdout (sometimes seen with tar cf), or
accepts input from stdin, rather than from a file. This is a method of using a file-oriented utility as
a filter in a pipe.
bash$ file
Usage: file [-bciknvzL] [-f namefile] [-m magicfiles] file...
By itself on the command-line, file fails with an error message.
Add a "-" for a more useful result. This causes the shell to await user input.
bash$ file -
abc
standard input: ASCII text
bash$ file -
#!/bin/bash
standard input: Bourne-Again shell script text executable
Now the command accepts input from stdin and analyzes it.
The "-" can be used to pipe stdout to other commands. This permits such stunts as prepending lines
to a file.
Using diff to compare a file with a section of another:
grep Linux file1 | diff file2 -
Finally, a real-world example using - with tar.
Example 3-4. Backup of all files changed in last day
#!/bin/bash
Chapter 3. Special Characters 22](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-28-320.jpg)
![Advanced Bash-Scripting Guide
In a different context, the "=" is a string comparison operator.
+
Plus. Addition arithmetic operator.
In a different context, the + is a Regular Expression operator.
+
Option. Option flag for a command or filter.
Certain commands and builtins use the + to enable certain options and the - to disable them. In
parameter substitution, the + prefixes an alternate value that a variable expands to.
%
modulo. Modulo (remainder of a division) arithmetic operation.
let "z = 5 % 3"
echo $z # 2
In a different context, the % is a pattern matching operator.
~
home directory [tilde]. This corresponds to the $HOME internal variable. ~bozo is bozo's home
directory, and ls ~bozo lists the contents of it. ~/ is the current user's home directory, and ls ~/ lists the
contents of it.
bash$ echo ~bozo
/home/bozo
bash$ echo ~
/home/bozo
bash$ echo ~/
/home/bozo/
bash$ echo ~:
/home/bozo:
bash$ echo ~nonexistent-user
~nonexistent-user
~+
current working directory. This corresponds to the $PWD internal variable.
~-
previous working directory. This corresponds to the $OLDPWD internal variable.
=~
regular expression match. This operator was introduced with version 3 of Bash.
^
beginning-of-line. In a regular expression, a "^" addresses the beginning of a line of text.
^, ^^
Uppercase conversion in parameter substitution (added in version 4 of Bash).
Control Characters
change the behavior of the terminal or text display. A control character is a CONTROL + key
combination (pressed simultaneously). A control character may also be written in octal or
hexadecimal notation, following an escape.
Control characters are not normally useful inside a script.
Chapter 3. Special Characters 24](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-30-320.jpg)
![Advanced Bash-Scripting Guide
# In the [first vertical tab example] . . . the vertical tab
#+ makes the printing go straight down without a carriage return.
# This is true only on devices, such as the Linux console,
#+ that can't go "backward."
# The real purpose of VT is to go straight UP, not down.
# It can be used to print superscripts on a printer.
# The col utility can be used to emulate the proper behavior of VT.
exit 0
◊ Ctl-N
Erases a line of text recalled from history buffer [20] (on the command-line).
◊ Ctl-O
Issues a newline (on the command-line).
◊ Ctl-P
Recalls last command from history buffer (on the command-line).
◊ Ctl-Q
Resume (XON).
This resumes stdin in a terminal.
◊ Ctl-R
Backwards search for text in history buffer (on the command-line).
◊ Ctl-S
Suspend (XOFF).
This freezes stdin in a terminal. (Use Ctl-Q to restore input.)
◊ Ctl-T
Reverses the position of the character the cursor is on with the previous character (on the
command-line).
◊ Ctl-U
Erase a line of input, from the cursor backward to beginning of line. In some settings, Ctl-U
erases the entire line of input, regardless of cursor position.
◊ Ctl-V
When inputting text, Ctl-V permits inserting control characters. For example, the following
two are equivalent:
echo -e 'x0a'
echo <Ctl-V><Ctl-J>
Ctl-V is primarily useful from within a text editor.
◊ Ctl-W
When typing text on the console or in an xterm window, Ctl-W erases from the character
under the cursor backwards to the first instance of whitespace. In some settings, Ctl-W
erases backwards to first non-alphanumeric character.
Chapter 3. Special Characters 27](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-33-320.jpg)
![Advanced Bash-Scripting Guide
◊ Ctl-X
In certain word processing programs, Cuts highlighted text and copies to clipboard.
◊ Ctl-Y
Pastes back text previously erased (with Ctl-K or Ctl-U).
◊ Ctl-Z
Pauses a foreground job.
Substitute operation in certain word processing applications.
EOF (end-of-file) character in the MSDOS filesystem.
Whitespace
functions as a separator between commands and/or variables. Whitespace consists of either
spaces, tabs, blank lines, or any combination thereof. [21] In some contexts, such as variable
assignment, whitespace is not permitted, and results in a syntax error.
Blank lines have no effect on the action of a script, and are therefore useful for visually separating
functional sections.
$IFS, the special variable separating fields of input to certain commands. It defaults to whitespace.
Definition: A field is a discrete chunk of data expressed as a string of consecutive characters.
Separating each field from adjacent fields is either whitespace or some other designated character
(often determined by the $IFS). In some contexts, a field may be called a record.
To preserve whitespace within a string or in a variable, use quoting.
UNIX filters can target and operate on whitespace using the POSIX character class [:space:].
Chapter 3. Special Characters 28](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-34-320.jpg)
![Chapter 4. Introduction to Variables and
Parameters
Variables are how programming and scripting languages represent data. A variable is nothing more than a
label, a name assigned to a location or set of locations in computer memory holding an item of data.
Variables appear in arithmetic operations and manipulation of quantities, and in string parsing.
4.1. Variable Substitution
The name of a variable is a placeholder for its value, the data it holds. Referencing (retrieving) its value is
called variable substitution.
$
Let us carefully distinguish between the name of a variable and its value. If variable1 is the name
of a variable, then $variable1 is a reference to its value, the data item it contains. [22]
bash$ variable1=23
bash$ echo variable1
variable1
bash$ echo $variable1
23
The only time a variable appears "naked" -- without the $ prefix -- is when declared or assigned, when
unset, when exported, or in the special case of a variable representing a signal (see Example 29-5).
Assignment may be with an = (as in var1=27), in a read statement, and at the head of a loop (for
var2 in 1 2 3).
Enclosing a referenced value in double quotes (" ... ") does not interfere with variable substitution.
This is called partial quoting, sometimes referred to as "weak quoting." Using single quotes (' ... ')
causes the variable name to be used literally, and no substitution will take place. This is full quoting,
sometimes referred to as 'strong quoting.' See Chapter 5 for a detailed discussion.
Note that $variable is actually a simplified form of ${variable}. In contexts where the
$variable syntax causes an error, the longer form may work (see Section 9.3, below).
Example 4-1. Variable assignment and substitution
#!/bin/bash
# ex9.sh
# Variables: assignment and substitution
a=375
hello=$a
Chapter 4. Introduction to Variables and Parameters 29](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-35-320.jpg)
![Advanced Bash-Scripting Guide
# May cause problems with older versions of "sh" . . .
# --------------------------------------------------------------
echo; echo
numbers="one two three"
# ^ ^
other_numbers="1 2 3"
# ^ ^
# If there is whitespace embedded within a variable,
#+ then quotes are necessary.
# other_numbers=1 2 3 # Gives an error message.
echo "numbers = $numbers"
echo "other_numbers = $other_numbers" # other_numbers = 1 2 3
# Escaping the whitespace also works.
mixed_bag=2 --- Whatever
# ^ ^ Space after escape ().
echo "$mixed_bag" # 2 --- Whatever
echo; echo
echo "uninitialized_variable = $uninitialized_variable"
# Uninitialized variable has null value (no value at all!).
uninitialized_variable= # Declaring, but not initializing it --
#+ same as setting it to a null value, as above.
echo "uninitialized_variable = $uninitialized_variable"
# It still has a null value.
uninitialized_variable=23 # Set it.
unset uninitialized_variable # Unset it.
echo "uninitialized_variable = $uninitialized_variable"
# It still has a null value.
echo
exit 0
An uninitialized variable has a "null" value -- no assigned value at all (not zero!).
if [ -z "$unassigned" ]
then
echo "$unassigned is NULL."
fi # $unassigned is NULL.
Using a variable before assigning a value to it may cause problems. It is nevertheless
possible to perform arithmetic operations on an uninitialized variable.
echo "$uninitialized" # (blank line)
let "uninitialized += 5" # Add 5 to it.
echo "$uninitialized" # 5
# Conclusion:
# An uninitialized variable has no value,
#+ however it acts as if it were 0 in an arithmetic operation.
# This is undocumented (and probably non-portable) behavior,
#+ and should not be used in a script.
See also Example 14-23.
Chapter 4. Introduction to Variables and Parameters 31](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-37-320.jpg)
![Advanced Bash-Scripting Guide
variables that the process may reference. In this sense, the shell behaves like any other
process.
Every time a shell starts, it creates shell variables that correspond to its own
environmental variables. Updating or adding new environmental variables causes the
shell to update its environment, and all the shell's child processes (the commands it
executes) inherit this environment.
The space allotted to the environment is limited. Creating too many environmental
variables or ones that use up excessive space may cause problems.
bash$ eval "`seq 10000 | sed -e 's/.*/export var&=ZZZZZZZZZZZZZZ/'`"
bash$ du
bash: /usr/bin/du: Argument list too long
Note: this "error" has been fixed, as of kernel version 2.6.23.
(Thank you, Stéphane Chazelas for the clarification, and for providing the above
example.)
If a script sets environmental variables, they need to be "exported," that is, reported to the
environment local to the script. This is the function of the export command.
A script can export variables only to child processes, that is, only to commands or
processes which that particular script initiates. A script invoked from the
command-line cannot export variables back to the command-line environment.
Child processes cannot export variables back to the parent processes that spawned
them.
Definition: A child process is a subprocess launched by another process, its
parent.
Positional parameters
Arguments passed to the script from the command line [23] : $0, $1, $2, $3 . . .
$0 is the name of the script itself, $1 is the first argument, $2 the second, $3 the third, and so forth.
[24] After $9, the arguments must be enclosed in brackets, for example, ${10}, ${11}, ${12}.
The special variables $* and $@ denote all the positional parameters.
Example 4-5. Positional Parameters
#!/bin/bash
# Call this script with at least 10 parameters, for example
# ./scriptname 1 2 3 4 5 6 7 8 9 10
MINPARAMS=10
echo
echo "The name of this script is "$0"."
Chapter 4. Introduction to Variables and Parameters 35](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-41-320.jpg)
![Advanced Bash-Scripting Guide
# Adds ./ for current directory
echo "The name of this script is "`basename $0`"."
# Strips out path name info (see 'basename')
echo
if [ -n "$1" ] # Tested variable is quoted.
then
echo "Parameter #1 is $1" # Need quotes to escape #
fi
if [ -n "$2" ]
then
echo "Parameter #2 is $2"
fi
if [ -n "$3" ]
then
echo "Parameter #3 is $3"
fi
# ...
if [ -n "${10}" ] # Parameters > $9 must be enclosed in {brackets}.
then
echo "Parameter #10 is ${10}"
fi
echo "-----------------------------------"
echo "All the command-line parameters are: "$*""
if [ $# -lt "$MINPARAMS" ]
then
echo
echo "This script needs at least $MINPARAMS command-line arguments!"
fi
echo
exit 0
Bracket notation for positional parameters leads to a fairly simple way of referencing the last
argument passed to a script on the command-line. This also requires indirect referencing.
args=$# # Number of args passed.
lastarg=${!args}
# Note: This is an *indirect reference* to $args ...
# Or: lastarg=${!#} (Thanks, Chris Monson.)
# This is an *indirect reference* to the $# variable.
# Note that lastarg=${!$#} doesn't work.
Some scripts can perform different operations, depending on which name they are invoked with. For
this to work, the script needs to check $0, the name it was invoked by. There must also exist symbolic
links to all the alternate names of the script. See Example 15-2.
Chapter 4. Introduction to Variables and Parameters 36](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-42-320.jpg)
![Advanced Bash-Scripting Guide
If a script expects a command-line parameter but is invoked without one, this may
cause a null variable assignment, generally an undesirable result. One way to prevent
this is to append an extra character to both sides of the assignment statement using the
expected positional parameter.
variable1_=$1_ # Rather than variable1=$1
# This will prevent an error, even if positional parameter is absent.
critical_argument01=$variable1_
# The extra character can be stripped off later, like so.
variable1=${variable1_/_/}
# Side effects only if $variable1_ begins with an underscore.
# This uses one of the parameter substitution templates discussed later.
# (Leaving out the replacement pattern results in a deletion.)
# A more straightforward way of dealing with this is
#+ to simply test whether expected positional parameters have been passed.
if [ -z $1 ]
then
exit $E_MISSING_POS_PARAM
fi
# However, as Fabian Kreutz points out,
#+ the above method may have unexpected side-effects.
# A better method is parameter substitution:
# ${1:-$DefaultVal}
# See the "Parameter Substition" section
#+ in the "Variables Revisited" chapter.
---
Example 4-6. wh, whois domain name lookup
#!/bin/bash
# ex18.sh
# Does a 'whois domain-name' lookup on any of 3 alternate servers:
# ripe.net, cw.net, radb.net
# Place this script -- renamed 'wh' -- in /usr/local/bin
# Requires symbolic links:
# ln -s /usr/local/bin/wh /usr/local/bin/wh-ripe
# ln -s /usr/local/bin/wh /usr/local/bin/wh-cw
# ln -s /usr/local/bin/wh /usr/local/bin/wh-radb
E_NOARGS=65
if [ -z "$1" ]
then
echo "Usage: `basename $0` [domain-name]"
exit $E_NOARGS
fi
# Check script name and call proper server.
case `basename $0` in # Or: case ${0##*/} in
"wh" ) whois $1@whois.ripe.net;;
Chapter 4. Introduction to Variables and Parameters 37](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-43-320.jpg)
![Advanced Bash-Scripting Guide
"wh-ripe") whois $1@whois.ripe.net;;
"wh-radb") whois $1@whois.radb.net;;
"wh-cw" ) whois $1@whois.cw.net;;
* ) echo "Usage: `basename $0` [domain-name]";;
esac
exit $?
---
The shift command reassigns the positional parameters, in effect shifting them to the left one notch.
$1 <--- $2, $2 <--- $3, $3 <--- $4, etc.
The old $1 disappears, but $0 (the script name) does not change. If you use a large number of
positional parameters to a script, shift lets you access those past 10, although {bracket} notation also
permits this.
Example 4-7. Using shift
#!/bin/bash
# shft.sh: Using 'shift' to step through all the positional parameters.
# Name this script something like shft.sh,
#+ and invoke it with some parameters.
#+ For example:
# sh shft.sh a b c def 23 Skidoo
until [ -z "$1" ] # Until all parameters used up . . .
do
echo -n "$1 "
shift
done
echo # Extra linefeed.
# But, what happens to the "used-up" parameters?
echo "$2"
# Nothing echoes!
# When $2 shifts into $1 (and there is no $3 to shift into $2)
#+ then $2 remains empty.
# So, it is not a parameter *copy*, but a *move*.
exit
# See also the echo-params.sh script for a "shiftless"
#+ alternative method of stepping through the positional params.
The shift command can take a numerical parameter indicating how many positions to shift.
#!/bin/bash
# shift-past.sh
shift 3 # Shift 3 positions.
# n=3; shift $n
# Has the same effect.
echo "$1"
Chapter 4. Introduction to Variables and Parameters 38](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-44-320.jpg)
![Advanced Bash-Scripting Guide
exit 0
# ======================== #
$ sh shift-past.sh 1 2 3 4 5
4
# However, as Eleni Fragkiadaki, points out,
#+ attempting a 'shift' past the number of
#+ positional parameters ($#) returns an exit status of 1,
#+ and the positional parameters themselves do not change.
# This means possibly getting stuck in an endless loop. . . .
# For example:
# until [ -z "$1" ]
# do
# echo -n "$1 "
# shift 20 # If less than 20 pos params,
# done #+ then loop never ends!
#
# When in doubt, add a sanity check. . . .
# shift 20 || break
# ^^^^^^^^
The shift command works in a similar fashion on parameters passed to a function. See
Example 33-16.
Chapter 4. Introduction to Variables and Parameters 39](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-45-320.jpg)
![Chapter 5. Quoting
Quoting means just that, bracketing a string in quotes. This has the effect of protecting special characters in
the string from reinterpretation or expansion by the shell or shell script. (A character is "special" if it has an
interpretation other than its literal meaning. For example, the asterisk * represents a wild card character in
globbing and Regular Expressions).
bash$ ls -l [Vv]*
-rw-rw-r-- 1 bozo bozo 324 Apr 2 15:05 VIEWDATA.BAT
-rw-rw-r-- 1 bozo bozo 507 May 4 14:25 vartrace.sh
-rw-rw-r-- 1 bozo bozo 539 Apr 14 17:11 viewdata.sh
bash$ ls -l '[Vv]*'
ls: [Vv]*: No such file or directory
In everyday speech or writing, when we "quote" a phrase, we set it apart and give it special meaning. In a
Bash script, when we quote a string, we set it apart and protect its literal meaning.
Certain programs and utilities reinterpret or expand special characters in a quoted string. An important use of
quoting is protecting a command-line parameter from the shell, but still letting the calling program expand it.
bash$ grep '[Ff]irst' *.txt
file1.txt:This is the first line of file1.txt.
file2.txt:This is the First line of file2.txt.
Note that the unquoted grep [Ff]irst *.txt works under the Bash shell. [25]
Quoting can also suppress echo's "appetite" for newlines.
bash$ echo $(ls -l)
total 8 -rw-rw-r-- 1 bo bo 13 Aug 21 12:57 t.sh -rw-rw-r-- 1 bo bo 78 Aug 21 12:57 u.sh
bash$ echo "$(ls -l)"
total 8
-rw-rw-r-- 1 bo bo 13 Aug 21 12:57 t.sh
-rw-rw-r-- 1 bo bo 78 Aug 21 12:57 u.sh
5.1. Quoting Variables
When referencing a variable, it is generally advisable to enclose its name in double quotes. This prevents
reinterpretation of all special characters within the quoted string -- except $, ` (backquote), and (escape). [26]
Keeping $ as a special character within double quotes permits referencing a quoted variable
("$variable"), that is, replacing the variable with its value (see Example 4-1, above).
Use double quotes to prevent word splitting. [27] An argument enclosed in double quotes presents itself as a
single word, even if it contains whitespace separators.
List="one two three"
Chapter 5. Quoting 40](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-46-320.jpg)
![Advanced Bash-Scripting Guide
for a in $List # Splits the variable in parts at whitespace.
do
echo "$a"
done
# one
# two
# three
echo "---"
for a in "$List" # Preserves whitespace in a single variable.
do # ^ ^
echo "$a"
done
# one two three
A more elaborate example:
variable1="a variable containing five words"
COMMAND This is $variable1 # Executes COMMAND with 7 arguments:
# "This" "is" "a" "variable" "containing" "five" "words"
COMMAND "This is $variable1" # Executes COMMAND with 1 argument:
# "This is a variable containing five words"
variable2="" # Empty.
COMMAND $variable2 $variable2 $variable2
# Executes COMMAND with no arguments.
COMMAND "$variable2" "$variable2" "$variable2"
# Executes COMMAND with 3 empty arguments.
COMMAND "$variable2 $variable2 $variable2"
# Executes COMMAND with 1 argument (2 spaces).
# Thanks, Stéphane Chazelas.
Enclosing the arguments to an echo statement in double quotes is necessary only when word splitting or
preservation of whitespace is an issue.
Example 5-1. Echoing Weird Variables
#!/bin/bash
# weirdvars.sh: Echoing weird variables.
echo
var="'(]{}$""
echo $var # '(]{}$"
echo "$var" # '(]{}$" Doesn't make a difference.
echo
IFS=''
echo $var # '(] {}$" converted to space. Why?
echo "$var" # '(]{}$"
# Examples above supplied by Stephane Chazelas.
Chapter 5. Quoting 41](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-47-320.jpg)
![Advanced Bash-Scripting Guide
# Will exit with status of last command.
$? reads the exit status of the last command executed. After a function returns, $? gives the exit status of the
last command executed in the function. This is Bash's way of giving functions a "return value." [28]
Following the execution of a pipe, a $? gives the exit status of the last command executed.
After a script terminates, a $? from the command-line gives the exit status of the script, that is, the last
command executed in the script, which is, by convention, 0 on success or an integer in the range 1 - 255 on
error.
Example 6-1. exit / exit status
#!/bin/bash
echo hello
echo $? # Exit status 0 returned because command executed successfully.
lskdf # Unrecognized command.
echo $? # Non-zero exit status returned because command failed to execute.
echo
exit 113 # Will return 113 to shell.
# To verify this, type "echo $?" after script terminates.
# By convention, an 'exit 0' indicates success,
#+ while a non-zero exit value means an error or anomalous condition.
$? is especially useful for testing the result of a command in a script (see Example 15-35 and Example 15-20).
The !, the logical not qualifier, reverses the outcome of a test or command, and this affects its exit status.
Example 6-2. Negating a condition using !
true # The "true" builtin.
echo "exit status of "true" = $?" # 0
! true
echo "exit status of "! true" = $?" # 1
# Note that the "!" needs a space between it and the command.
# !true leads to a "command not found" error
#
# The '!' operator prefixing a command invokes the Bash history mechanism.
true
!true
# No error this time, but no negation either.
# It just repeats the previous command (true).
# =========================================================== #
# Preceding a _pipe_ with ! inverts the exit status returned.
ls | bogus_command # bash: bogus_command: command not found
echo $? # 127
! ls | bogus_command # bash: bogus_command: command not found
Chapter 6. Exit and Exit Status 49](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-55-320.jpg)
![Chapter 7. Tests
Every reasonably complete programming language can test for a condition, then act according to the result of
the test. Bash has the test command, various bracket and parenthesis operators, and the if/then construct.
7.1. Test Constructs
• An if/then construct tests whether the exit status of a list of commands is 0 (since 0 means "success"
by UNIX convention), and if so, executes one or more commands.
• There exists a dedicated command called [ (left bracket special character). It is a synonym for test,
and a builtin for efficiency reasons. This command considers its arguments as comparison expressions
or file tests and returns an exit status corresponding to the result of the comparison (0 for true, 1 for
false).
• With version 2.02, Bash introduced the [[ ... ]] extended test command, which performs comparisons
in a manner more familiar to programmers from other languages. Note that [[ is a keyword, not a
command.
Bash sees [[ $a -lt $b ]] as a single element, which returns an exit status.
•
The (( ... )) and let ... constructs also return an exit status, according to whether the arithmetic
expressions they evaluate expand to a non-zero value. These arithmetic-expansion constructs may
therefore be used to perform arithmetic comparisons.
(( 0 && 1 )) # Logical AND
echo $? # 1 ***
# And so ...
let "num = (( 0 && 1 ))"
echo $num # 0
# But ...
let "num = (( 0 && 1 ))"
echo $? # 1 ***
(( 200 || 11 )) # Logical OR
echo $? # 0 ***
# ...
let "num = (( 200 || 11 ))"
echo $num # 1
let "num = (( 200 || 11 ))"
echo $? # 0 ***
(( 200 | 11 )) # Bitwise OR
echo $? # 0 ***
# ...
let "num = (( 200 | 11 ))"
echo $num # 203
let "num = (( 200 | 11 ))"
echo $? # 0 ***
# The "let" construct returns the same exit status
#+ as the double-parentheses arithmetic expansion.
Chapter 7. Tests 51](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-57-320.jpg)
![Advanced Bash-Scripting Guide
• An if can test any command, not just conditions enclosed within brackets.
if cmp a b &> /dev/null # Suppress output.
then echo "Files a and b are identical."
else echo "Files a and b differ."
fi
# The very useful "if-grep" construct:
# -----------------------------------
if grep -q Bash file
then echo "File contains at least one occurrence of Bash."
fi
word=Linux
letter_sequence=inu
if echo "$word" | grep -q "$letter_sequence"
# The "-q" option to grep suppresses output.
then
echo "$letter_sequence found in $word"
else
echo "$letter_sequence not found in $word"
fi
if COMMAND_WHOSE_EXIT_STATUS_IS_0_UNLESS_ERROR_OCCURRED
then echo "Command succeeded."
else echo "Command failed."
fi
• These last two examples courtesy of Stéphane Chazelas.
Example 7-1. What is truth?
#!/bin/bash
# Tip:
# If you're unsure of how a certain condition would evaluate,
#+ test it in an if-test.
echo
echo "Testing "0""
if [ 0 ] # zero
then
echo "0 is true."
else # Or else ...
echo "0 is false."
fi # 0 is true.
echo
echo "Testing "1""
if [ 1 ] # one
then
echo "1 is true."
else
echo "1 is false."
fi # 1 is true.
echo
Chapter 7. Tests 52](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-58-320.jpg)
![Advanced Bash-Scripting Guide
echo "Testing "-1""
if [ -1 ] # minus one
then
echo "-1 is true."
else
echo "-1 is false."
fi # -1 is true.
echo
echo "Testing "NULL""
if [ ] # NULL (empty condition)
then
echo "NULL is true."
else
echo "NULL is false."
fi # NULL is false.
echo
echo "Testing "xyz""
if [ xyz ] # string
then
echo "Random string is true."
else
echo "Random string is false."
fi # Random string is true.
echo
echo "Testing "$xyz""
if [ $xyz ] # Tests if $xyz is null, but...
# it's only an uninitialized variable.
then
echo "Uninitialized variable is true."
else
echo "Uninitialized variable is false."
fi # Uninitialized variable is false.
echo
echo "Testing "-n $xyz""
if [ -n "$xyz" ] # More pedantically correct.
then
echo "Uninitialized variable is true."
else
echo "Uninitialized variable is false."
fi # Uninitialized variable is false.
echo
xyz= # Initialized, but set to null value.
echo "Testing "-n $xyz""
if [ -n "$xyz" ]
then
echo "Null variable is true."
else
echo "Null variable is false."
fi # Null variable is false.
Chapter 7. Tests 53](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-59-320.jpg)
![Advanced Bash-Scripting Guide
echo
# When is "false" true?
echo "Testing "false""
if [ "false" ] # It seems that "false" is just a string.
then
echo ""false" is true." #+ and it tests true.
else
echo ""false" is false."
fi # "false" is true.
echo
echo "Testing "$false"" # Again, uninitialized variable.
if [ "$false" ]
then
echo ""$false" is true."
else
echo ""$false" is false."
fi # "$false" is false.
# Now, we get the expected result.
# What would happen if we tested the uninitialized variable "$true"?
echo
exit 0
Exercise. Explain the behavior of Example 7-1, above.
if [ condition-true ]
then
command 1
command 2
...
else # Or else ...
# Adds default code block executing if original condition tests false.
command 3
command 4
...
fi
When if and then are on same line in a condition test, a semicolon must terminate the if statement. Both if
and then are keywords. Keywords (or commands) begin statements, and before a new statement on the
same line begins, the old one must terminate.
if [ -x "$filename" ]; then
Else if and elif
elif
elif is a contraction for else if. The effect is to nest an inner if/then construct within an outer one.
Chapter 7. Tests 54](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-60-320.jpg)
![Advanced Bash-Scripting Guide
if [ condition1 ]
then
command1
command2
command3
elif [ condition2 ]
# Same as else if
then
command4
command5
else
default-command
fi
The if test condition-true construct is the exact equivalent of if [ condition-true ]. As
it happens, the left bracket, [ , is a token [29] which invokes the test command. The closing right bracket, ] , in
an if/test should not therefore be strictly necessary, however newer versions of Bash require it.
The test command is a Bash builtin which tests file types and compares strings. Therefore, in a Bash
script, test does not call the external /usr/bin/test binary, which is part of the sh-utils package.
Likewise, [ does not call /usr/bin/[, which is linked to /usr/bin/test.
bash$ type test
test is a shell builtin
bash$ type '['
[ is a shell builtin
bash$ type '[['
[[ is a shell keyword
bash$ type ']]'
]] is a shell keyword
bash$ type ']'
bash: type: ]: not found
If, for some reason, you wish to use /usr/bin/test in a Bash script, then specify it by full
pathname.
Example 7-2. Equivalence of test, /usr/bin/test, [ ], and /usr/bin/[
#!/bin/bash
echo
if test -z "$1"
then
echo "No command-line arguments."
else
echo "First command-line argument is $1."
fi
echo
if /usr/bin/test -z "$1" # Equivalent to "test" builtin.
# ^^^^^^^^^^^^^ # Specifying full pathname.
then
echo "No command-line arguments."
else
Chapter 7. Tests 55](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-61-320.jpg)
![Advanced Bash-Scripting Guide
echo "First command-line argument is $1."
fi
echo
if [ -z "$1" ] # Functionally identical to above code blocks.
# if [ -z "$1" should work, but...
#+ Bash responds to a missing close-bracket with an error message.
then
echo "No command-line arguments."
else
echo "First command-line argument is $1."
fi
echo
if /usr/bin/[ -z "$1" ] # Again, functionally identical to above.
# if /usr/bin/[ -z "$1" # Works, but gives an error message.
# # Note:
# This has been fixed in Bash, version 3.x.
then
echo "No command-line arguments."
else
echo "First command-line argument is $1."
fi
echo
exit 0
The [[ ]] construct is the more versatile Bash version of [ ]. This is the extended test command, adopted from
ksh88.
***
No filename expansion or word splitting takes place between [[ and ]], but there is parameter expansion and
command substitution.
file=/etc/passwd
if [[ -e $file ]]
then
echo "Password file exists."
fi
Using the [[ ... ]] test construct, rather than [ ... ] can prevent many logic errors in scripts. For example, the
&&, ||, <, and > operators work within a [[ ]] test, despite giving an error within a [ ] construct.
Arithmetic evaluation of octal / hexadecimal constants takes place automatically within a [[ ... ]] construct.
# [[ Octal and hexadecimal evaluation ]]
# Thank you, Moritz Gronbach, for pointing this out.
decimal=15
octal=017 # = 15 (decimal)
Chapter 7. Tests 56](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-62-320.jpg)
![Advanced Bash-Scripting Guide
hex=0x0f # = 15 (decimal)
if [ "$decimal" -eq "$octal" ]
then
echo "$decimal equals $octal"
else
echo "$decimal is not equal to $octal" # 15 is not equal to 017
fi # Doesn't evaluate within [ single brackets ]!
if [[ "$decimal" -eq "$octal" ]]
then
echo "$decimal equals $octal" # 15 equals 017
else
echo "$decimal is not equal to $octal"
fi # Evaluates within [[ double brackets ]]!
if [[ "$decimal" -eq "$hex" ]]
then
echo "$decimal equals $hex" # 15 equals 0x0f
else
echo "$decimal is not equal to $hex"
fi # [[ $hexadecimal ]] also evaluates!
Following an if, neither the test command nor the test brackets ( [ ] or [[ ]] ) are strictly necessary.
dir=/home/bozo
if cd "$dir" 2>/dev/null; then # "2>/dev/null" hides error message.
echo "Now in $dir."
else
echo "Can't change to $dir."
fi
The "if COMMAND" construct returns the exit status of COMMAND.
Similarly, a condition within test brackets may stand alone without an if, when used in combination with
a list construct.
var1=20
var2=22
[ "$var1" -ne "$var2" ] && echo "$var1 is not equal to $var2"
home=/home/bozo
[ -d "$home" ] || echo "$home directory does not exist."
The (( )) construct expands and evaluates an arithmetic expression. If the expression evaluates as zero, it
returns an exit status of 1, or "false". A non-zero expression returns an exit status of 0, or "true". This is in
marked contrast to using the test and [ ] constructs previously discussed.
Example 7-3. Arithmetic Tests using (( ))
#!/bin/bash
# Arithmetic tests.
# The (( ... )) construct evaluates and tests numerical expressions.
# Exit status opposite from [ ... ] construct!
Chapter 7. Tests 57](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-63-320.jpg)
![Advanced Bash-Scripting Guide
(( 0 ))
echo "Exit status of "(( 0 ))" is $?." # 1
(( 1 ))
echo "Exit status of "(( 1 ))" is $?." # 0
(( 5 > 4 )) # true
echo "Exit status of "(( 5 > 4 ))" is $?." # 0
(( 5 > 9 )) # false
echo "Exit status of "(( 5 > 9 ))" is $?." # 1
(( 5 - 5 )) # 0
echo "Exit status of "(( 5 - 5 ))" is $?." # 1
(( 5 / 4 )) # Division o.k.
echo "Exit status of "(( 5 / 4 ))" is $?." # 0
(( 1 / 2 )) # Division result < 1.
echo "Exit status of "(( 1 / 2 ))" is $?." # Rounded off to 0.
# 1
(( 1 / 0 )) 2>/dev/null # Illegal division by 0.
# ^^^^^^^^^^^
echo "Exit status of "(( 1 / 0 ))" is $?." # 1
# What effect does the "2>/dev/null" have?
# What would happen if it were removed?
# Try removing it, then rerunning the script.
# ======================================= #
# (( ... )) also useful in an if-then test.
var1=5
var2=4
if (( var1 > var2 ))
then #^ ^ Note: Not $var1, $var2. Why?
echo "$var1 is greater than $var2"
fi # 5 is greater than 4
exit 0
7.2. File test operators
Returns true if...
-e
file exists
-a
file exists
This is identical in effect to -e. It has been "deprecated," [30] and its use is discouraged.
-f
file is a regular file (not a directory or device file)
-s
file is not zero size
Chapter 7. Tests 58](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-64-320.jpg)
![Advanced Bash-Scripting Guide
-d
file is a directory
-b
file is a block device
-c
file is a character device
device0="/dev/sda2" # / (root directory)
if [ -b "$device0" ]
then
echo "$device0 is a block device."
fi
# /dev/sda2 is a block device.
device1="/dev/ttyS1" # PCMCIA modem card.
if [ -c "$device1" ]
then
echo "$device1 is a character device."
fi
# /dev/ttyS1 is a character device.
-p
file is a pipe
-h
file is a symbolic link
-L
file is a symbolic link
-S
file is a socket
-t
file (descriptor) is associated with a terminal device
This test option may be used to check whether the stdin [ -t 0 ] or stdout [ -t 1 ] in a
given script is a terminal.
-r
file has read permission (for the user running the test)
-w
file has write permission (for the user running the test)
-x
file has execute permission (for the user running the test)
-g
set-group-id (sgid) flag set on file or directory
If a directory has the sgid flag set, then a file created within that directory belongs to the group that
owns the directory, not necessarily to the group of the user who created the file. This may be useful
for a directory shared by a workgroup.
-u
set-user-id (suid) flag set on file
Chapter 7. Tests 59](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-65-320.jpg)
![Advanced Bash-Scripting Guide
A binary owned by root with set-user-id flag set runs with root privileges, even when an
ordinary user invokes it. [31] This is useful for executables (such as pppd and cdrecord) that need to
access system hardware. Lacking the suid flag, these binaries could not be invoked by a non-root
user.
-rwsr-xr-t 1 root 178236 Oct 2 2000 /usr/sbin/pppd
A file with the suid flag set shows an s in its permissions.
-k
sticky bit set
Commonly known as the sticky bit, the save-text-mode flag is a special type of file permission. If a
file has this flag set, that file will be kept in cache memory, for quicker access. [32] If set on a
directory, it restricts write permission. Setting the sticky bit adds a t to the permissions on the file or
directory listing.
drwxrwxrwt 7 root 1024 May 19 21:26 tmp/
If a user does not own a directory that has the sticky bit set, but has write permission in that directory,
she can only delete those files that she owns in it. This keeps users from inadvertently overwriting or
deleting each other's files in a publicly accessible directory, such as /tmp. (The owner of the
directory or root can, of course, delete or rename files there.)
-O
you are owner of file
-G
group-id of file same as yours
-N
file modified since it was last read
f1 -nt f2
file f1 is newer than f2
f1 -ot f2
file f1 is older than f2
f1 -ef f2
files f1 and f2 are hard links to the same file
!
"not" -- reverses the sense of the tests above (returns true if condition absent).
Example 7-4. Testing for broken links
#!/bin/bash
# broken-link.sh
# Written by Lee bigelow <ligelowbee@yahoo.com>
# Used in ABS Guide with permission.
# A pure shell script to find dead symlinks and output them quoted
#+ so they can be fed to xargs and dealt with :)
#+ eg. sh broken-link.sh /somedir /someotherdir|xargs rm
#
# This, however, is a better method:
#
# find "somedir" -type l -print0|
# xargs -r0 file|
Chapter 7. Tests 60](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-66-320.jpg)
![Advanced Bash-Scripting Guide
# grep "broken symbolic"|
# sed -e 's/^|: *broken symbolic.*$/"/g'
#
#+ but that wouldn't be pure Bash, now would it.
# Caution: beware the /proc file system and any circular links!
################################################################
# If no args are passed to the script set directories-to-search
#+ to current directory. Otherwise set the directories-to-search
#+ to the args passed.
######################
[ $# -eq 0 ] && directorys=`pwd` || directorys=$@
# Setup the function linkchk to check the directory it is passed
#+ for files that are links and don't exist, then print them quoted.
# If one of the elements in the directory is a subdirectory then
#+ send that subdirectory to the linkcheck function.
##########
linkchk () {
for element in $1/*; do
[ -h "$element" -a ! -e "$element" ] && echo "$element"
[ -d "$element" ] && linkchk $element
# Of course, '-h' tests for symbolic link, '-d' for directory.
done
}
# Send each arg that was passed to the script to the linkchk() function
#+ if it is a valid directoy. If not, then print the error message
#+ and usage info.
##################
for directory in $directorys; do
if [ -d $directory ]
then linkchk $directory
else
echo "$directory is not a directory"
echo "Usage: $0 dir1 dir2 ..."
fi
done
exit $?
Example 28-1, Example 10-7, Example 10-3, Example 28-3, and Example A-1 also illustrate uses of the file
test operators.
7.3. Other Comparison Operators
A binary comparison operator compares two variables or quantities. Note that integer and string comparison
use a different set of operators.
integer comparison
-eq
is equal to
if [ "$a" -eq "$b" ]
Chapter 7. Tests 61](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-67-320.jpg)
![Advanced Bash-Scripting Guide
-ne
is not equal to
if [ "$a" -ne "$b" ]
-gt
is greater than
if [ "$a" -gt "$b" ]
-ge
is greater than or equal to
if [ "$a" -ge "$b" ]
-lt
is less than
if [ "$a" -lt "$b" ]
-le
is less than or equal to
if [ "$a" -le "$b" ]
<
is less than (within double parentheses)
(("$a" < "$b"))
<=
is less than or equal to (within double parentheses)
(("$a" <= "$b"))
>
is greater than (within double parentheses)
(("$a" > "$b"))
>=
is greater than or equal to (within double parentheses)
(("$a" >= "$b"))
string comparison
=
is equal to
if [ "$a" = "$b" ]
==
is equal to
if [ "$a" == "$b" ]
This is a synonym for =.
Chapter 7. Tests 62](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-68-320.jpg)
![Advanced Bash-Scripting Guide
The == comparison operator behaves differently within a double-brackets test than within
single brackets.
[[ $a == z* ]] # True if $a starts with an "z" (regex pattern matching).
[[ $a == "z*" ]] # True if $a is equal to z* (literal matching).
[ $a == z* ] # File globbing and word splitting take place.
[ "$a" == "z*" ] # True if $a is equal to z* (literal matching).
# Thanks, Stéphane Chazelas
!=
is not equal to
if [ "$a" != "$b" ]
This operator uses pattern matching within a [[ ... ]] construct.
<
is less than, in ASCII alphabetical order
if [[ "$a" < "$b" ]]
if [ "$a" < "$b" ]
Note that the "<" needs to be escaped within a [ ] construct.
>
is greater than, in ASCII alphabetical order
if [[ "$a" > "$b" ]]
if [ "$a" > "$b" ]
Note that the ">" needs to be escaped within a [ ] construct.
See Example 26-11 for an application of this comparison operator.
-z
string is null, that is, has zero length
String='' # Zero-length ("null") string variable.
if [ -z "$String" ]
then
echo "$String is null."
else
echo "$String is NOT null."
fi # $String is null.
-n
string is not null.
The -n test requires that the string be quoted within the test brackets. Using an
unquoted string with ! -z, or even just the unquoted string alone within test brackets
(see Example 7-6) normally works, however, this is an unsafe practice. Always quote a
tested string. [33]
Chapter 7. Tests 63](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-69-320.jpg)
![Advanced Bash-Scripting Guide
Example 7-5. Arithmetic and string comparisons
#!/bin/bash
a=4
b=5
# Here "a" and "b" can be treated either as integers or strings.
# There is some blurring between the arithmetic and string comparisons,
#+ since Bash variables are not strongly typed.
# Bash permits integer operations and comparisons on variables
#+ whose value consists of all-integer characters.
# Caution advised, however.
echo
if [ "$a" -ne "$b" ]
then
echo "$a is not equal to $b"
echo "(arithmetic comparison)"
fi
echo
if [ "$a" != "$b" ]
then
echo "$a is not equal to $b."
echo "(string comparison)"
# "4" != "5"
# ASCII 52 != ASCII 53
fi
# In this particular instance, both "-ne" and "!=" work.
echo
exit 0
Example 7-6. Testing whether a string is null
#!/bin/bash
# str-test.sh: Testing null strings and unquoted strings,
#+ but not strings and sealing wax, not to mention cabbages and kings . . .
# Using if [ ... ]
# If a string has not been initialized, it has no defined value.
# This state is called "null" (not the same as zero!).
if [ -n $string1 ] # string1 has not been declared or initialized.
then
echo "String "string1" is not null."
else
echo "String "string1" is null."
fi # Wrong result.
# Shows $string1 as not null, although it was not initialized.
echo
# Let's try it again.
Chapter 7. Tests 64](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-70-320.jpg)
![Advanced Bash-Scripting Guide
if [ -n "$string1" ] # This time, $string1 is quoted.
then
echo "String "string1" is not null."
else
echo "String "string1" is null."
fi # Quote strings within test brackets!
echo
if [ $string1 ] # This time, $string1 stands naked.
then
echo "String "string1" is not null."
else
echo "String "string1" is null."
fi # This works fine.
# The [ ... ] test operator alone detects whether the string is null.
# However it is good practice to quote it (if [ "$string1" ]).
#
# As Stephane Chazelas points out,
# if [ $string1 ] has one argument, "]"
# if [ "$string1" ] has two arguments, the empty "$string1" and "]"
echo
string1=initialized
if [ $string1 ] # Again, $string1 stands unquoted.
then
echo "String "string1" is not null."
else
echo "String "string1" is null."
fi # Again, gives correct result.
# Still, it is better to quote it ("$string1"), because . . .
string1="a = b"
if [ $string1 ] # Again, $string1 stands unquoted.
then
echo "String "string1" is not null."
else
echo "String "string1" is null."
fi # Not quoting "$string1" now gives wrong result!
exit 0 # Thank you, also, Florian Wisser, for the "heads-up".
Example 7-7. zmore
#!/bin/bash
# zmore
# View gzipped files with 'more' filter.
E_NOARGS=65
E_NOTFOUND=66
E_NOTGZIP=67
if [ $# -eq 0 ] # same effect as: if [ -z "$1" ]
Chapter 7. Tests 65](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-71-320.jpg)
![Advanced Bash-Scripting Guide
# $1 can exist, but be empty: zmore "" arg2 arg3
then
echo "Usage: `basename $0` filename" >&2
# Error message to stderr.
exit $E_NOARGS
# Returns 65 as exit status of script (error code).
fi
filename=$1
if [ ! -f "$filename" ] # Quoting $filename allows for possible spaces.
then
echo "File $filename not found!" >&2 # Error message to stderr.
exit $E_NOTFOUND
fi
if [ ${filename##*.} != "gz" ]
# Using bracket in variable substitution.
then
echo "File $1 is not a gzipped file!"
exit $E_NOTGZIP
fi
zcat $1 | more
# Uses the 'more' filter.
# May substitute 'less' if desired.
exit $? # Script returns exit status of pipe.
# Actually "exit $?" is unnecessary, as the script will, in any case,
#+ return the exit status of the last command executed.
compound comparison
-a
logical and
exp1 -a exp2 returns true if both exp1 and exp2 are true.
-o
logical or
exp1 -o exp2 returns true if either exp1 or exp2 is true.
These are similar to the Bash comparison operators && and ||, used within double brackets.
[[ condition1 && condition2 ]]
The -o and -a operators work with the test command or occur within single test brackets.
if [ "$expr1" -a "$expr2" ]
then
echo "Both expr1 and expr2 are true."
else
echo "Either expr1 or expr2 is false."
fi
But, as rihad points out:
Chapter 7. Tests 66](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-72-320.jpg)
![Advanced Bash-Scripting Guide
[ 1 -eq 1 ] && [ -n "`echo true 1>&2`" ] # true
[ 1 -eq 2 ] && [ -n "`echo true 1>&2`" ] # (no output)
# ^^^^^^^ False condition. So far, everything as expected.
# However ...
[ 1 -eq 2 -a -n "`echo true 1>&2`" ] # true
# ^^^^^^^ False condition. So, why "true" output?
# Is it because both condition clauses within brackets evaluate?
[[ 1 -eq 2 && -n "`echo true 1>&2`" ]] # (no output)
# No, that's not it.
# Apparently && and || "short-circuit" while -a and -o do not.
Refer to Example 8-3, Example 26-17, and Example A-29 to see compound comparison operators in action.
7.4. Nested if/then Condition Tests
Condition tests using the if/then construct may be nested. The net result is equivalent to using the &&
compound comparison operator.
a=3
if [ "$a" -gt 0 ]
then
if [ "$a" -lt 5 ]
then
echo "The value of "a" lies somewhere between 0 and 5."
fi
fi
# Same result as:
if [ "$a" -gt 0 ] && [ "$a" -lt 5 ]
then
echo "The value of "a" lies somewhere between 0 and 5."
fi
Example 34-4 demonstrates a nested if/then condition test.
7.5. Testing Your Knowledge of Tests
The systemwide xinitrc file can be used to launch the X server. This file contains quite a number of if/then
tests. The following is excerpted from an "ancient" version of xinitrc (Red Hat 7.1, or thereabouts).
if [ -f $HOME/.Xclients ]; then
exec $HOME/.Xclients
elif [ -f /etc/X11/xinit/Xclients ]; then
exec /etc/X11/xinit/Xclients
else
# failsafe settings. Although we should never get here
# (we provide fallbacks in Xclients as well) it can't hurt.
xclock -geometry 100x100-5+5 &
xterm -geometry 80x50-50+150 &
if [ -f /usr/bin/netscape -a -f /usr/share/doc/HTML/index.html ]; then
netscape /usr/share/doc/HTML/index.html &
fi
fi
Chapter 7. Tests 67](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-73-320.jpg)
![Chapter 8. Operations and Related Topics
8.1. Operators
assignment
variable assignment
Initializing or changing the value of a variable
=
All-purpose assignment operator, which works for both arithmetic and string assignments.
var=27
category=minerals # No spaces allowed after the "=".
Do not confuse the "=" assignment operator with the = test operator.
# = as a test operator
if [ "$string1" = "$string2" ]
then
command
fi
# if [ "X$string1" = "X$string2" ] is safer,
#+ to prevent an error message should one of the variables be empty.
# (The prepended "X" characters cancel out.)
arithmetic operators
+
plus
-
minus
*
multiplication
/
division
**
exponentiation
# Bash, version 2.02, introduced the "**" exponentiation operator.
let "z=5**3" # 5 * 5 * 5
echo "z = $z" # z = 125
%
modulo, or mod (returns the remainder of an integer division operation)
bash$ expr 5 % 3
2
5/3 = 1, with remainder 2
Chapter 8. Operations and Related Topics 69](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-75-320.jpg)
![Advanced Bash-Scripting Guide
This operator finds use in, among other things, generating numbers within a specific range (see
Example 9-26 and Example 9-30) and formatting program output (see Example 26-16 and Example
A-6). It can even be used to generate prime numbers, (see Example A-15). Modulo turns up
surprisingly often in numerical recipes.
Example 8-1. Greatest common divisor
#!/bin/bash
# gcd.sh: greatest common divisor
# Uses Euclid's algorithm
# The "greatest common divisor" (gcd) of two integers
#+ is the largest integer that will divide both, leaving no remainder.
# Euclid's algorithm uses successive division.
# In each pass,
#+ dividend <--- divisor
#+ divisor <--- remainder
#+ until remainder = 0.
# The gcd = dividend, on the final pass.
#
# For an excellent discussion of Euclid's algorithm, see
#+ Jim Loy's site, http://www.jimloy.com/number/euclids.htm.
# ------------------------------------------------------
# Argument check
ARGS=2
E_BADARGS=85
if [ $# -ne "$ARGS" ]
then
echo "Usage: `basename $0` first-number second-number"
exit $E_BADARGS
fi
# ------------------------------------------------------
gcd ()
{
dividend=$1 # Arbitrary assignment.
divisor=$2 #! It doesn't matter which of the two is larger.
# Why not?
remainder=1 # If an uninitialized variable is used inside
#+ test brackets, an error message results.
until [ "$remainder" -eq 0 ]
do # ^^^^^^^^^^ Must be previously initialized!
let "remainder = $dividend % $divisor"
dividend=$divisor # Now repeat with 2 smallest numbers.
divisor=$remainder
done # Euclid's algorithm
} # Last $dividend is the gcd.
gcd $1 $2
Chapter 8. Operations and Related Topics 70](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-76-320.jpg)
![Advanced Bash-Scripting Guide
echo; echo "GCD of $1 and $2 = $dividend"; echo
# Exercises :
# ---------
# 1) Check command-line arguments to make sure they are integers,
#+ and exit the script with an appropriate error message if not.
# 2) Rewrite the gcd () function to use local variables.
exit 0
+=
plus-equal (increment variable by a constant)
let "var += 5" results in var being incremented by 5.
-=
minus-equal (decrement variable by a constant)
*=
times-equal (multiply variable by a constant)
let "var *= 4" results in var being multiplied by 4.
/=
slash-equal (divide variable by a constant)
%=
mod-equal (remainder of dividing variable by a constant)
Arithmetic operators often occur in an expr or let expression.
Example 8-2. Using Arithmetic Operations
#!/bin/bash
# Counting to 11 in 10 different ways.
n=1; echo -n "$n "
let "n = $n + 1" # let "n = n + 1" also works.
echo -n "$n "
: $((n = $n + 1))
# ":" necessary because otherwise Bash attempts
#+ to interpret "$((n = $n + 1))" as a command.
echo -n "$n "
(( n = n + 1 ))
# A simpler alternative to the method above.
# Thanks, David Lombard, for pointing this out.
echo -n "$n "
n=$(($n + 1))
echo -n "$n "
: $[ n = $n + 1 ]
# ":" necessary because otherwise Bash attempts
#+ to interpret "$[ n = $n + 1 ]" as a command.
# Works even if "n" was initialized as a string.
Chapter 8. Operations and Related Topics 71](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-77-320.jpg)
![Advanced Bash-Scripting Guide
echo -n "$n "
n=$[ $n + 1 ]
# Works even if "n" was initialized as a string.
#* Avoid this type of construct, since it is obsolete and nonportable.
# Thanks, Stephane Chazelas.
echo -n "$n "
# Now for C-style increment operators.
# Thanks, Frank Wang, for pointing this out.
let "n++" # let "++n" also works.
echo -n "$n "
(( n++ )) # (( ++n ) also works.
echo -n "$n "
: $(( n++ )) # : $(( ++n )) also works.
echo -n "$n "
: $[ n++ ] # : $[ ++n ]] also works
echo -n "$n "
echo
exit 0
Integer variables in older versions of Bash were signed long (32-bit) integers, in the range of
-2147483648 to 2147483647. An operation that took a variable outside these limits gave an erroneous
result.
echo $BASH_VERSION # 1.14
a=2147483646
echo "a = $a" # a = 2147483646
let "a+=1" # Increment "a".
echo "a = $a" # a = 2147483647
let "a+=1" # increment "a" again, past the limit.
echo "a = $a" # a = -2147483648
# ERROR: out of range,
# + and the leftmost bit, the sign bit,
# + has been set, making the result negative.
As of version >= 2.05b, Bash supports 64-bit integers.
Bash does not understand floating point arithmetic. It treats numbers containing a decimal point as
strings.
a=1.5
let "b = $a + 1.3" # Error.
# t2.sh: let: b = 1.5 + 1.3: syntax error in expression
# (error token is ".5 + 1.3")
echo "b = $b" # b=1
Use bc in scripts that that need floating point calculations or math library functions.
Chapter 8. Operations and Related Topics 72](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-78-320.jpg)
![Advanced Bash-Scripting Guide
bitwise operators. The bitwise operators seldom make an appearance in shell scripts. Their chief use seems to
be manipulating and testing values read from ports or sockets. "Bit flipping" is more relevant to compiled
languages, such as C and C++, which provide direct access to system hardware.
bitwise operators
<<
bitwise left shift (multiplies by 2 for each shift position)
<<=
left-shift-equal
let "var <<= 2" results in var left-shifted 2 bits (multiplied by 4)
>>
bitwise right shift (divides by 2 for each shift position)
>>=
right-shift-equal (inverse of <<=)
&
bitwise AND
&=
bitwise AND-equal
|
bitwise OR
|=
bitwise OR-equal
~
bitwise NOT
^
bitwise XOR
^=
bitwise XOR-equal
logical (boolean) operators
!
NOT
if [ ! -f $FILENAME ]
then
...
&&
AND
if [ $condition1 ] && [ $condition2 ]
# Same as: if [ $condition1 -a $condition2 ]
# Returns true if both condition1 and condition2 hold true...
if [[ $condition1 && $condition2 ]] # Also works.
# Note that && operator not permitted inside brackets
#+ of [ ... ] construct.
&& may also be used, depending on context, in an and list to concatenate commands.
||
Chapter 8. Operations and Related Topics 73](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-79-320.jpg)
![Advanced Bash-Scripting Guide
OR
if [ $condition1 ] || [ $condition2 ]
# Same as: if [ $condition1 -o $condition2 ]
# Returns true if either condition1 or condition2 holds true...
if [[ $condition1 || $condition2 ]] # Also works.
# Note that || operator not permitted inside brackets
#+ of a [ ... ] construct.
Bash tests the exit status of each statement linked with a logical operator.
Example 8-3. Compound Condition Tests Using && and ||
#!/bin/bash
a=24
b=47
if [ "$a" -eq 24 ] && [ "$b" -eq 47 ]
then
echo "Test #1 succeeds."
else
echo "Test #1 fails."
fi
# ERROR: if [ "$a" -eq 24 && "$b" -eq 47 ]
#+ attempts to execute ' [ "$a" -eq 24 '
#+ and fails to finding matching ']'.
#
# Note: if [[ $a -eq 24 && $b -eq 24 ]] works.
# The double-bracket if-test is more flexible
#+ than the single-bracket version.
# (The "&&" has a different meaning in line 17 than in line 6.)
# Thanks, Stephane Chazelas, for pointing this out.
if [ "$a" -eq 98 ] || [ "$b" -eq 47 ]
then
echo "Test #2 succeeds."
else
echo "Test #2 fails."
fi
# The -a and -o options provide
#+ an alternative compound condition test.
# Thanks to Patrick Callahan for pointing this out.
if [ "$a" -eq 24 -a "$b" -eq 47 ]
then
echo "Test #3 succeeds."
else
echo "Test #3 fails."
fi
if [ "$a" -eq 98 -o "$b" -eq 47 ]
then
Chapter 8. Operations and Related Topics 74](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-80-320.jpg)
![Advanced Bash-Scripting Guide
echo "Test #4 succeeds."
else
echo "Test #4 fails."
fi
a=rhino
b=crocodile
if [ "$a" = rhino ] && [ "$b" = crocodile ]
then
echo "Test #5 succeeds."
else
echo "Test #5 fails."
fi
exit 0
The && and || operators also find use in an arithmetic context.
bash$ echo $(( 1 && 2 )) $((3 && 0)) $((4 || 0)) $((0 || 0))
1 0 1 0
miscellaneous operators
,
Comma operator
The comma operator chains together two or more arithmetic operations. All the operations are
evaluated (with possible side effects. [34]
let "t1 = ((5 + 3, 7 - 1, 15 - 4))"
echo "t1 = $t1" ^^^^^^ # t1 = 11
# Here t1 is set to the result of the last operation. Why?
let "t2 = ((a = 9, 15 / 3))" # Set "a" and calculate "t2".
echo "t2 = $t2 a = $a" # t2 = 5 a = 9
The comma operator finds use mainly in for loops. See Example 10-12.
8.2. Numerical Constants
A shell script interprets a number as decimal (base 10), unless that number has a special prefix or notation. A
number preceded by a 0 is octal (base 8). A number preceded by 0x is hexadecimal (base 16). A
number with an embedded # evaluates as BASE#NUMBER (with range and notational restrictions).
Example 8-4. Representation of numerical constants
#!/bin/bash
# numbers.sh: Representation of numbers in different bases.
# Decimal: the default
let "dec = 32"
echo "decimal number = $dec" # 32
# Nothing out of the ordinary here.
Chapter 8. Operations and Related Topics 75](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-81-320.jpg)
![Chapter 9. Variables Revisited
Used properly, variables can add power and flexibility to scripts. This requires learning their subtleties and
nuances.
9.1. Internal Variables
Builtin variables:
variables affecting bash script behavior
$BASH
The path to the Bash binary itself
bash$ echo $BASH
/bin/bash
$BASH_ENV
An environmental variable pointing to a Bash startup file to be read when a script is invoked
$BASH_SUBSHELL
A variable indicating the subshell level. This is a new addition to Bash, version 3.
See Example 20-1 for usage.
$BASHPID
Process ID of the current instance of Bash. This is not the same as the $$ variable, but it often gives
the same result.
bash4$ echo $$
11015
bash4$ echo $BASHPID
11015
bash4$ ps ax | grep bash4
11015 pts/2 R 0:00 bash4
But ...
#!/bin/bash4
echo "$$ outside of subshell = $$" # 9602
echo "$BASH_SUBSHELL outside of subshell = $BASH_SUBSHELL" # 0
echo "$BASHPID outside of subshell = $BASHPID" # 9602
echo
( echo "$$ inside of subshell = $$" # 9602
echo "$BASH_SUBSHELL inside of subshell = $BASH_SUBSHELL" # 1
echo "$BASHPID inside of subshell = $BASHPID" ) # 9603
# Note that $$ returns PID of parent process.
$BASH_VERSINFO[n]
A 6-element array containing version information about the installed release of Bash. This is similar
to $BASH_VERSION, below, but a bit more detailed.
Chapter 9. Variables Revisited 78](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-84-320.jpg)
![Advanced Bash-Scripting Guide
# Bash version info:
for n in 0 1 2 3 4 5
do
echo "BASH_VERSINFO[$n] = ${BASH_VERSINFO[$n]}"
done
# BASH_VERSINFO[0] = 3 # Major version no.
# BASH_VERSINFO[1] = 00 # Minor version no.
# BASH_VERSINFO[2] = 14 # Patch level.
# BASH_VERSINFO[3] = 1 # Build version.
# BASH_VERSINFO[4] = release # Release status.
# BASH_VERSINFO[5] = i386-redhat-linux-gnu # Architecture
# (same as $MACHTYPE).
$BASH_VERSION
The version of Bash installed on the system
bash$ echo $BASH_VERSION
3.2.25(1)-release
tcsh% echo $BASH_VERSION
BASH_VERSION: Undefined variable.
Checking $BASH_VERSION is a good method of determining which shell is running. $SHELL does
not necessarily give the correct answer.
$CDPATH
A colon-separated list of search paths available to the cd command, similar in function to the $PATH
variable for binaries. The $CDPATH variable may be set in the local ~/.bashrc file.
bash$ cd bash-doc
bash: cd: bash-doc: No such file or directory
bash$ CDPATH=/usr/share/doc
bash$ cd bash-doc
/usr/share/doc/bash-doc
bash$ echo $PWD
/usr/share/doc/bash-doc
$DIRSTACK
The top value in the directory stack [35] (affected by pushd and popd)
This builtin variable corresponds to the dirs command, however dirs shows the entire contents of the
directory stack.
$EDITOR
The default editor invoked by a script, usually vi or emacs.
$EUID
"effective" user ID number
Identification number of whatever identity the current user has assumed, perhaps by means of su.
The $EUID is not necessarily the same as the $UID.
Chapter 9. Variables Revisited 79](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-85-320.jpg)
![Advanced Bash-Scripting Guide
$FUNCNAME
Name of the current function
xyz23 ()
{
echo "$FUNCNAME now executing." # xyz23 now executing.
}
xyz23
echo "FUNCNAME = $FUNCNAME" # FUNCNAME =
# Null value outside a function.
See also Example A-50.
$GLOBIGNORE
A list of filename patterns to be excluded from matching in globbing.
$GROUPS
Groups current user belongs to
This is a listing (array) of the group id numbers for current user, as recorded in /etc/passwd and
/etc/group.
root# echo $GROUPS
0
root# echo ${GROUPS[1]}
1
root# echo ${GROUPS[5]}
6
$HOME
Home directory of the user, usually /home/username (see Example 9-16)
$HOSTNAME
The hostname command assigns the system host name at bootup in an init script. However, the
gethostname() function sets the Bash internal variable $HOSTNAME. See also Example 9-16.
$HOSTTYPE
host type
Like $MACHTYPE, identifies the system hardware.
bash$ echo $HOSTTYPE
i686
$IFS
internal field separator
This variable determines how Bash recognizes fields, or word boundaries, when it interprets character
strings.
$IFS defaults to whitespace (space, tab, and newline), but may be changed, for example, to parse a
comma-separated data file. Note that $* uses the first character held in $IFS. See Example 5-1.
Chapter 9. Variables Revisited 80](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-86-320.jpg)
![Advanced Bash-Scripting Guide
bash$ echo "$IFS"
(With $IFS set to default, a blank line displays.)
bash$ echo "$IFS" | cat -vte
^I$
$
(Show whitespace: here a single space, ^I [horizontal tab],
and newline, and display "$" at end-of-line.)
bash$ bash -c 'set w x y z; IFS=":-;"; echo "$*"'
w:x:y:z
(Read commands from string and assign any arguments to pos params.)
$IFS does not handle whitespace the same as it does other characters.
Example 9-1. $IFS and whitespace
#!/bin/bash
# ifs.sh
# $IFS treats whitespace differently than other characters.
output_args_one_per_line()
{
for arg
do
echo "[$arg]"
done # ^ ^ Embed within brackets, for your viewing pleasure.
}
echo; echo "IFS=" ""
echo "-------"
IFS=" "
var=" a b c "
# ^ ^^ ^^^
output_args_one_per_line $var # output_args_one_per_line `echo " a b c "`
# [a]
# [b]
# [c]
echo; echo "IFS=:"
echo "-----"
IFS=:
var=":a::b:c:::" # Same pattern as above,
# ^ ^^ ^^^ #+ but substituting ":" for " " ...
output_args_one_per_line $var
# []
# [a]
# []
# [b]
# [c]
Chapter 9. Variables Revisited 81](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-87-320.jpg)
![Advanced Bash-Scripting Guide
# []
# []
# Note "empty" brackets.
# The same thing happens with the "FS" field separator in awk.
echo
exit
(Many thanks, Stéphane Chazelas, for clarification and above examples.)
See also Example 15-41, Example 10-7, and Example 18-14 for instructive examples of using $IFS.
$IGNOREEOF
Ignore EOF: how many end-of-files (control-D) the shell will ignore before logging out.
$LC_COLLATE
Often set in the .bashrc or /etc/profile files, this variable controls collation order in filename
expansion and pattern matching. If mishandled, LC_COLLATE can cause unexpected results in
filename globbing.
As of version 2.05 of Bash, filename globbing no longer distinguishes between
lowercase and uppercase letters in a character range between brackets. For example, ls
[A-M]* would match both File1.txt and file1.txt. To revert to the customary
behavior of bracket matching, set LC_COLLATE to C by an export
LC_COLLATE=C in /etc/profile and/or ~/.bashrc.
$LC_CTYPE
This internal variable controls character interpretation in globbing and pattern matching.
$LINENO
This variable is the line number of the shell script in which this variable appears. It has significance
only within the script in which it appears, and is chiefly useful for debugging purposes.
# *** BEGIN DEBUG BLOCK ***
last_cmd_arg=$_ # Save it.
echo "At line number $LINENO, variable "v1" = $v1"
echo "Last command argument processed = $last_cmd_arg"
# *** END DEBUG BLOCK ***
$MACHTYPE
machine type
Identifies the system hardware.
bash$ echo $MACHTYPE
i686
$OLDPWD
Old working directory ("OLD-Print-Working-Directory", previous directory you were in).
$OSTYPE
operating system type
bash$ echo $OSTYPE
linux
$PATH
Path to binaries, usually /usr/bin/, /usr/X11R6/bin/, /usr/local/bin, etc.
Chapter 9. Variables Revisited 82](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-88-320.jpg)
![Advanced Bash-Scripting Guide
When given a command, the shell automatically does a hash table search on the directories listed in
the path for the executable. The path is stored in the environmental variable, $PATH, a list of
directories, separated by colons. Normally, the system stores the $PATH definition in
/etc/profile and/or ~/.bashrc (see Appendix G).
bash$ echo $PATH
/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/sbin:/usr/sbin
PATH=${PATH}:/opt/bin appends the /opt/bin directory to the current path. In a script, it
may be expedient to temporarily add a directory to the path in this way. When the script exits, this
restores the original $PATH (a child process, such as a script, may not change the environment of the
parent process, the shell).
The current "working directory", ./, is usually omitted from the $PATH as a security
measure.
$PIPESTATUS
Array variable holding exit status(es) of last executed foreground pipe.
bash$ echo $PIPESTATUS
0
bash$ ls -al | bogus_command
bash: bogus_command: command not found
bash$ echo ${PIPESTATUS[1]}
127
bash$ ls -al | bogus_command
bash: bogus_command: command not found
bash$ echo $?
127
The members of the $PIPESTATUS array hold the exit status of each respective command executed
in a pipe. $PIPESTATUS[0] holds the exit status of the first command in the pipe,
$PIPESTATUS[1] the exit status of the second command, and so on.
The $PIPESTATUS variable may contain an erroneous 0 value in a login shell (in
releases prior to 3.0 of Bash).
tcsh% bash
bash$ who | grep nobody | sort
bash$ echo ${PIPESTATUS[*]}
0
The above lines contained in a script would produce the expected 0 1 0 output.
Thank you, Wayne Pollock for pointing this out and supplying the above example.
The $PIPESTATUS variable gives unexpected results in some contexts.
bash$ echo $BASH_VERSION
3.00.14(1)-release
bash$ $ ls | bogus_command | wc
Chapter 9. Variables Revisited 83](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-89-320.jpg)
![Advanced Bash-Scripting Guide
bash: bogus_command: command not found
0 0 0
bash$ echo ${PIPESTATUS[@]}
141 127 0
Chet Ramey attributes the above output to the behavior of ls. If ls writes to a pipe
whose output is not read, then SIGPIPE kills it, and its exit status is 141. Otherwise
its exit status is 0, as expected. This likewise is the case for tr.
$PIPESTATUS is a "volatile" variable. It needs to be captured immediately after the
pipe in question, before any other command intervenes.
bash$ $ ls | bogus_command | wc
bash: bogus_command: command not found
0 0 0
bash$ echo ${PIPESTATUS[@]}
0 127 0
bash$ echo ${PIPESTATUS[@]}
0
The pipefail option may be useful in cases where $PIPESTATUS does not give the
desired information.
$PPID
The $PPID of a process is the process ID (pid) of its parent process. [36]
Compare this with the pidof command.
$PROMPT_COMMAND
A variable holding a command to be executed just before the primary prompt, $PS1 is to be
displayed.
$PS1
This is the main prompt, seen at the command-line.
$PS2
The secondary prompt, seen when additional input is expected. It displays as ">".
$PS3
The tertiary prompt, displayed in a select loop (see Example 10-29).
$PS4
The quartenary prompt, shown at the beginning of each line of output when invoking a script with the
-x option. It displays as "+".
$PWD
Working directory (directory you are in at the time)
This is the analog to the pwd builtin command.
#!/bin/bash
E_WRONG_DIRECTORY=83
clear # Clear screen.
Chapter 9. Variables Revisited 84](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-90-320.jpg)
![Advanced Bash-Scripting Guide
TargetDirectory=/home/bozo/projects/GreatAmericanNovel
cd $TargetDirectory
echo "Deleting stale files in $TargetDirectory."
if [ "$PWD" != "$TargetDirectory" ]
then # Keep from wiping out wrong directory by accident.
echo "Wrong directory!"
echo "In $PWD, rather than $TargetDirectory!"
echo "Bailing out!"
exit $E_WRONG_DIRECTORY
fi
rm -rf *
rm .[A-Za-z0-9]* # Delete dotfiles.
# rm -f .[^.]* ..?* to remove filenames beginning with multiple dots.
# (shopt -s dotglob; rm -f *) will also work.
# Thanks, S.C. for pointing this out.
# A filename (`basename`) may contain all characters in the 0 - 255 range,
#+ except "/".
# Deleting files beginning with weird characters, such as -
#+ is left as an exercise.
echo
echo "Done."
echo "Old files deleted in $TargetDirectory."
echo
# Various other operations here, as necessary.
exit $?
$REPLY
The default value when a variable is not supplied to read. Also applicable to select menus, but only
supplies the item number of the variable chosen, not the value of the variable itself.
#!/bin/bash
# reply.sh
# REPLY is the default value for a 'read' command.
echo
echo -n "What is your favorite vegetable? "
read
echo "Your favorite vegetable is $REPLY."
# REPLY holds the value of last "read" if and only if
#+ no variable supplied.
echo
echo -n "What is your favorite fruit? "
read fruit
echo "Your favorite fruit is $fruit."
echo "but..."
echo "Value of $REPLY is still $REPLY."
# $REPLY is still set to its previous value because
#+ the variable $fruit absorbed the new "read" value.
echo
exit 0
Chapter 9. Variables Revisited 85](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-91-320.jpg)
![Advanced Bash-Scripting Guide
$SECONDS
The number of seconds the script has been running.
#!/bin/bash
TIME_LIMIT=10
INTERVAL=1
echo
echo "Hit Control-C to exit before $TIME_LIMIT seconds."
echo
while [ "$SECONDS" -le "$TIME_LIMIT" ]
do
if [ "$SECONDS" -eq 1 ]
then
units=second
else
units=seconds
fi
echo "This script has been running $SECONDS $units."
# On a slow or overburdened machine, the script may skip a count
#+ every once in a while.
sleep $INTERVAL
done
echo -e "a" # Beep!
exit 0
$SHELLOPTS
The list of enabled shell options, a readonly variable.
bash$ echo $SHELLOPTS
braceexpand:hashall:histexpand:monitor:history:interactive-comments:emacs
$SHLVL
Shell level, how deeply Bash is nested. [37] If, at the command-line, $SHLVL is 1, then in a script it
will increment to 2.
This variable is not affected by subshells. Use $BASH_SUBSHELL when you need
an indication of subshell nesting.
$TMOUT
If the $TMOUT environmental variable is set to a non-zero value time, then the shell prompt will
time out after $time seconds. This will cause a logout.
As of version 2.05b of Bash, it is now possible to use $TMOUT in a script in combination with read.
# Works in scripts for Bash, versions 2.05b and later.
TMOUT=3 # Prompt times out at three seconds.
echo "What is your favorite song?"
echo "Quickly now, you only have $TMOUT seconds to answer!"
read song
if [ -z "$song" ]
Chapter 9. Variables Revisited 86](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-92-320.jpg)
![Advanced Bash-Scripting Guide
then
song="(no answer)"
# Default response.
fi
echo "Your favorite song is $song."
There are other, more complex, ways of implementing timed input in a script. One alternative is to set
up a timing loop to signal the script when it times out. This also requires a signal handling routine to
trap (see Example 29-5) the interrupt generated by the timing loop (whew!).
Example 9-2. Timed Input
#!/bin/bash
# timed-input.sh
# TMOUT=3 Also works, as of newer versions of Bash.
TIMER_INTERRUPT=14
TIMELIMIT=3 # Three seconds in this instance.
# May be set to different value.
PrintAnswer()
{
if [ "$answer" = TIMEOUT ]
then
echo $answer
else # Don't want to mix up the two instances.
echo "Your favorite veggie is $answer"
kill $! # Kills no-longer-needed TimerOn function
#+ running in background.
# $! is PID of last job running in background.
fi
}
TimerOn()
{
sleep $TIMELIMIT && kill -s 14 $$ &
# Waits 3 seconds, then sends sigalarm to script.
}
Int14Vector()
{
answer="TIMEOUT"
PrintAnswer
exit $TIMER_INTERRUPT
}
trap Int14Vector $TIMER_INTERRUPT
# Timer interrupt (14) subverted for our purposes.
echo "What is your favorite vegetable "
TimerOn
read answer
PrintAnswer
Chapter 9. Variables Revisited 87](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-93-320.jpg)
![Advanced Bash-Scripting Guide
# Admittedly, this is a kludgy implementation of timed input.
# However, the "-t" option to "read" simplifies this task.
# See the "t-out.sh" script.
# However, what about timing not just single user input,
#+ but an entire script?
# If you need something really elegant ...
#+ consider writing the application in C or C++,
#+ using appropriate library functions, such as 'alarm' and 'setitimer.'
exit 0
An alternative is using stty.
Example 9-3. Once more, timed input
#!/bin/bash
# timeout.sh
# Written by Stephane Chazelas,
#+ and modified by the document author.
INTERVAL=5 # timeout interval
timedout_read() {
timeout=$1
varname=$2
old_tty_settings=`stty -g`
stty -icanon min 0 time ${timeout}0
eval read $varname # or just read $varname
stty "$old_tty_settings"
# See man page for "stty."
}
echo; echo -n "What's your name? Quick! "
timedout_read $INTERVAL your_name
# This may not work on every terminal type.
# The maximum timeout depends on the terminal.
#+ (it is often 25.5 seconds).
echo
if [ ! -z "$your_name" ] # If name input before timeout ...
then
echo "Your name is $your_name."
else
echo "Timed out."
fi
echo
# The behavior of this script differs somewhat from "timed-input.sh."
# At each keystroke, the counter resets.
exit 0
Perhaps the simplest method is using the -t option to read.
Chapter 9. Variables Revisited 88](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-94-320.jpg)
![Advanced Bash-Scripting Guide
Example 9-4. Timed read
#!/bin/bash
# t-out.sh
# Inspired by a suggestion from "syngin seven" (thanks).
TIMELIMIT=4 # 4 seconds
read -t $TIMELIMIT variable <&1
# ^^^
# In this instance, "<&1" is needed for Bash 1.x and 2.x,
# but unnecessary for Bash 3.x.
echo
if [ -z "$variable" ] # Is null?
then
echo "Timed out, variable still unset."
else
echo "variable = $variable"
fi
exit 0
$UID
User ID number
Current user's user identification number, as recorded in /etc/passwd
This is the current user's real id, even if she has temporarily assumed another identity through su.
$UID is a readonly variable, not subject to change from the command line or within a script, and is
the counterpart to the id builtin.
Example 9-5. Am I root?
#!/bin/bash
# am-i-root.sh: Am I root or not?
ROOT_UID=0 # Root has $UID 0.
if [ "$UID" -eq "$ROOT_UID" ] # Will the real "root" please stand up?
then
echo "You are root."
else
echo "You are just an ordinary user (but mom loves you just the same)."
fi
exit 0
# ============================================================= #
# Code below will not execute, because the script already exited.
# An alternate method of getting to the root of matters:
ROOTUSER_NAME=root
username=`id -nu` # Or... username=`whoami`
Chapter 9. Variables Revisited 89](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-95-320.jpg)
![Advanced Bash-Scripting Guide
if [ "$username" = "$ROOTUSER_NAME" ]
then
echo "Rooty, toot, toot. You are root."
else
echo "You are just a regular fella."
fi
See also Example 2-3.
The variables $ENV, $LOGNAME, $MAIL, $TERM, $USER, and $USERNAME are not
Bash builtins. These are, however, often set as environmental variables in one of the
Bash startup files. $SHELL, the name of the user's login shell, may be set from
/etc/passwd or in an "init" script, and it is likewise not a Bash builtin.
tcsh% echo $LOGNAME
bozo
tcsh% echo $SHELL
/bin/tcsh
tcsh% echo $TERM
rxvt
bash$ echo $LOGNAME
bozo
bash$ echo $SHELL
/bin/tcsh
bash$ echo $TERM
rxvt
Positional Parameters
$0, $1, $2, etc.
Positional parameters, passed from command line to script, passed to a function, or set to a variable
(see Example 4-5 and Example 14-16)
$#
Number of command-line arguments [38] or positional parameters (see Example 33-2)
$*
All of the positional parameters, seen as a single word
"$*" must be quoted.
$@
Same as $*, but each parameter is a quoted string, that is, the parameters are passed on intact, without
interpretation or expansion. This means, among other things, that each parameter in the argument list
is seen as a separate word.
Of course, "$@" should be quoted.
Example 9-6. arglist: Listing arguments with $* and $@
#!/bin/bash
# arglist.sh
# Invoke this script with several arguments, such as "one two three".
E_BADARGS=65
Chapter 9. Variables Revisited 90](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-96-320.jpg)
![Advanced Bash-Scripting Guide
if [ ! -n "$1" ]
then
echo "Usage: `basename $0` argument1 argument2 etc."
exit $E_BADARGS
fi
echo
index=1 # Initialize count.
echo "Listing args with "$*":"
for arg in "$*" # Doesn't work properly if "$*" isn't quoted.
do
echo "Arg #$index = $arg"
let "index+=1"
done # $* sees all arguments as single word.
echo "Entire arg list seen as single word."
echo
index=1 # Reset count.
# What happens if you forget to do this?
echo "Listing args with "$@":"
for arg in "$@"
do
echo "Arg #$index = $arg"
let "index+=1"
done # $@ sees arguments as separate words.
echo "Arg list seen as separate words."
echo
index=1 # Reset count.
echo "Listing args with $* (unquoted):"
for arg in $*
do
echo "Arg #$index = $arg"
let "index+=1"
done # Unquoted $* sees arguments as separate words.
echo "Arg list seen as separate words."
exit 0
Following a shift, the $@ holds the remaining command-line parameters, lacking the previous $1,
which was lost.
#!/bin/bash
# Invoke with ./scriptname 1 2 3 4 5
echo "$@" # 1 2 3 4 5
shift
echo "$@" # 2 3 4 5
shift
echo "$@" # 3 4 5
# Each "shift" loses parameter $1.
# "$@" then contains the remaining parameters.
The $@ special parameter finds use as a tool for filtering input into shell scripts. The cat "$@"
construction accepts input to a script either from stdin or from files given as parameters to the
Chapter 9. Variables Revisited 91](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-97-320.jpg)
![Advanced Bash-Scripting Guide
script. See Example 15-24 and Example 15-25.
The $* and $@ parameters sometimes display inconsistent and puzzling behavior,
depending on the setting of $IFS.
Example 9-7. Inconsistent $* and $@ behavior
#!/bin/bash
# Erratic behavior of the "$*" and "$@" internal Bash variables,
#+ depending on whether they are quoted or not.
# Inconsistent handling of word splitting and linefeeds.
set -- "First one" "second" "third:one" "" "Fifth: :one"
# Setting the script arguments, $1, $2, etc.
echo
echo 'IFS unchanged, using "$*"'
c=0
for i in "$*" # quoted
do echo "$((c+=1)): [$i]" # This line remains the same in every instance.
# Echo args.
done
echo ---
echo 'IFS unchanged, using $*'
c=0
for i in $* # unquoted
do echo "$((c+=1)): [$i]"
done
echo ---
echo 'IFS unchanged, using "$@"'
c=0
for i in "$@"
do echo "$((c+=1)): [$i]"
done
echo ---
echo 'IFS unchanged, using $@'
c=0
for i in $@
do echo "$((c+=1)): [$i]"
done
echo ---
IFS=:
echo 'IFS=":", using "$*"'
c=0
for i in "$*"
do echo "$((c+=1)): [$i]"
done
echo ---
echo 'IFS=":", using $*'
c=0
for i in $*
do echo "$((c+=1)): [$i]"
Chapter 9. Variables Revisited 92](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-98-320.jpg)
![Advanced Bash-Scripting Guide
done
echo ---
var=$*
echo 'IFS=":", using "$var" (var=$*)'
c=0
for i in "$var"
do echo "$((c+=1)): [$i]"
done
echo ---
echo 'IFS=":", using $var (var=$*)'
c=0
for i in $var
do echo "$((c+=1)): [$i]"
done
echo ---
var="$*"
echo 'IFS=":", using $var (var="$*")'
c=0
for i in $var
do echo "$((c+=1)): [$i]"
done
echo ---
echo 'IFS=":", using "$var" (var="$*")'
c=0
for i in "$var"
do echo "$((c+=1)): [$i]"
done
echo ---
echo 'IFS=":", using "$@"'
c=0
for i in "$@"
do echo "$((c+=1)): [$i]"
done
echo ---
echo 'IFS=":", using $@'
c=0
for i in $@
do echo "$((c+=1)): [$i]"
done
echo ---
var=$@
echo 'IFS=":", using $var (var=$@)'
c=0
for i in $var
do echo "$((c+=1)): [$i]"
done
echo ---
echo 'IFS=":", using "$var" (var=$@)'
c=0
for i in "$var"
do echo "$((c+=1)): [$i]"
done
echo ---
Chapter 9. Variables Revisited 93](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-99-320.jpg)
![Advanced Bash-Scripting Guide
var="$@"
echo 'IFS=":", using "$var" (var="$@")'
c=0
for i in "$var"
do echo "$((c+=1)): [$i]"
done
echo ---
echo 'IFS=":", using $var (var="$@")'
c=0
for i in $var
do echo "$((c+=1)): [$i]"
done
echo
# Try this script with ksh or zsh -y.
exit 0
# This example script by Stephane Chazelas,
# and slightly modified by the document author.
The $@ and $* parameters differ only when between double quotes.
Example 9-8. $* and $@ when $IFS is empty
#!/bin/bash
# If $IFS set, but empty,
#+ then "$*" and "$@" do not echo positional params as expected.
mecho () # Echo positional parameters.
{
echo "$1,$2,$3";
}
IFS="" # Set, but empty.
set a b c # Positional parameters.
mecho "$*" # abc,,
# ^^
mecho $* # a,b,c
mecho $@ # a,b,c
mecho "$@" # a,b,c
# The behavior of $* and $@ when $IFS is empty depends
#+ on which Bash or sh version being run.
# It is therefore inadvisable to depend on this "feature" in a script.
# Thanks, Stephane Chazelas.
exit
Other Special Parameters
Chapter 9. Variables Revisited 94](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-100-320.jpg)
![Advanced Bash-Scripting Guide
$-
Flags passed to script (using set). See Example 14-16.
This was originally a ksh construct adopted into Bash, and unfortunately it does not
seem to work reliably in Bash scripts. One possible use for it is to have a script
self-test whether it is interactive.
$!
PID (process ID) of last job run in background
LOG=$0.log
COMMAND1="sleep 100"
echo "Logging PIDs background commands for script: $0" >> "$LOG"
# So they can be monitored, and killed as necessary.
echo >> "$LOG"
# Logging commands.
echo -n "PID of "$COMMAND1": " >> "$LOG"
${COMMAND1} &
echo $! >> "$LOG"
# PID of "sleep 100": 1506
# Thank you, Jacques Lederer, for suggesting this.
Using $! for job control:
possibly_hanging_job & { sleep ${TIMEOUT}; eval 'kill -9 $!' &> /dev/null; }
# Forces completion of an ill-behaved program.
# Useful, for example, in init scripts.
# Thank you, Sylvain Fourmanoit, for this creative use of the "!" variable.
Or, alternately:
# This example by Matthew Sage.
# Used with permission.
TIMEOUT=30 # Timeout value in seconds
count=0
possibly_hanging_job & {
while ((count < TIMEOUT )); do
eval '[ ! -d "/proc/$!" ] && ((count = TIMEOUT))'
# /proc is where information about running processes is found.
# "-d" tests whether it exists (whether directory exists).
# So, we're waiting for the job in question to show up.
((count++))
sleep 1
done
eval '[ -d "/proc/$!" ] && kill -15 $!'
# If the hanging job is running, kill it.
}
$_
Special variable set to final argument of previous command executed.
Example 9-9. Underscore variable
Chapter 9. Variables Revisited 95](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-101-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
echo $_ # /bin/bash
# Just called /bin/bash to run the script.
# Note that this will vary according to
#+ how the script is invoked.
du >/dev/null # So no output from command.
echo $_ # du
ls -al >/dev/null # So no output from command.
echo $_ # -al (last argument)
:
echo $_ # :
$?
Exit status of a command, function, or the script itself (see Example 23-7)
$$
Process ID (PID) of the script itself. [39] The $$ variable often finds use in scripts to construct
"unique" temp file names (see Example 29-6, Example 15-31, and Example 14-27). This is usually
simpler than invoking mktemp.
9.2. Manipulating Strings
Bash supports a surprising number of string manipulation operations. Unfortunately, these tools lack a unified
focus. Some are a subset of parameter substitution, and others fall under the functionality of the UNIX expr
command. This results in inconsistent command syntax and overlap of functionality, not to mention
confusion.
String Length
${#string}
expr length $string
These are the equivalent of strlen() in C.
expr "$string" : '.*'
stringZ=abcABC123ABCabc
echo ${#stringZ} # 15
echo `expr length $stringZ` # 15
echo `expr "$stringZ" : '.*'` # 15
Example 9-10. Inserting a blank line between paragraphs in a text file
#!/bin/bash
# paragraph-space.sh
# Ver. 2.0, Reldate 05Aug08
# Inserts a blank line between paragraphs of a single-spaced text file.
# Usage: $0 <FILENAME
MINLEN=60 # May need to change this value.
# Assume lines shorter than $MINLEN characters ending in a period
Chapter 9. Variables Revisited 96](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-102-320.jpg)
![Advanced Bash-Scripting Guide
#+ terminate a paragraph. See exercises at end of script.
while read line # For as many lines as the input file has...
do
echo "$line" # Output the line itself.
len=${#line}
if [[ "$len" -lt "$MINLEN" && "$line" =~ [*.] ]]
then echo # Add a blank line immediately
fi #+ after short line terminated by a period.
done
exit
# Exercises:
# ---------
# 1) The script usually inserts a blank line at the end
#+ of the target file. Fix this.
# 2) Line 17 only considers periods as sentence terminators.
# Modify this to include other common end-of-sentence characters,
#+ such as ?, !, and ".
Length of Matching Substring at Beginning of String
expr match "$string" '$substring'
$substring is a regular expression.
expr "$string" : '$substring'
$substring is a regular expression.
stringZ=abcABC123ABCabc
# |------|
# 12345678
echo `expr match "$stringZ" 'abc[A-Z]*.2'` # 8
echo `expr "$stringZ" : 'abc[A-Z]*.2'` # 8
Index
expr index $string $substring
Numerical position in $string of first character in $substring that matches.
stringZ=abcABC123ABCabc
# 123456 ...
echo `expr index "$stringZ" C12` # 6
# C position.
echo `expr index "$stringZ" 1c` # 3
# 'c' (in #3 position) matches before '1'.
This is the near equivalent of strchr() in C.
Substring Extraction
${string:position}
Extracts substring from $string at $position.
Chapter 9. Variables Revisited 97](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-103-320.jpg)
![Advanced Bash-Scripting Guide
If the $string parameter is "*" or "@", then this extracts the positional parameters, [40] starting at
$position.
${string:position:length}
Extracts $length characters of substring from $string at $position.
stringZ=abcABC123ABCabc
# 0123456789.....
# 0-based indexing.
echo ${stringZ:0} # abcABC123ABCabc
echo ${stringZ:1} # bcABC123ABCabc
echo ${stringZ:7} # 23ABCabc
echo ${stringZ:7:3} # 23A
# Three characters of substring.
# Is it possible to index from the right end of the string?
echo ${stringZ:-4} # abcABC123ABCabc
# Defaults to full string, as in ${parameter:-default}.
# However . . .
echo ${stringZ:(-4)} # Cabc
echo ${stringZ: -4} # Cabc
# Now, it works.
# Parentheses or added space "escape" the position parameter.
# Thank you, Dan Jacobson, for pointing this out.
The position and length arguments can be "parameterized," that is, represented as a variable, rather
than as a numerical constant.
Example 9-11. Generating an 8-character "random" string
#!/bin/bash
# rand-string.sh
# Generating an 8-character "random" string.
if [ -n "$1" ] # If command-line argument present,
then #+ then set start-string to it.
str0="$1"
else # Else use PID of script as start-string.
str0="$$"
fi
POS=2 # Starting from position 2 in the string.
LEN=8 # Extract eight characters.
str1=$( echo "$str0" | md5sum | md5sum )
# Doubly scramble: ^^^^^^ ^^^^^^
randstring="${str1:$POS:$LEN}"
# Can parameterize ^^^^ ^^^^
echo "$randstring"
Chapter 9. Variables Revisited 98](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-104-320.jpg)
![Advanced Bash-Scripting Guide
exit $?
# bozo$ ./rand-string.sh my-password
# 1bdd88c4
# No, this is is not recommended
#+ as a method of generating hack-proof passwords.
If the $string parameter is "*" or "@", then this extracts a maximum of $length positional
parameters, starting at $position.
echo ${*:2} # Echoes second and following positional parameters.
echo ${@:2} # Same as above.
echo ${*:2:3} # Echoes three positional parameters, starting at second.
expr substr $string $position $length
Extracts $length characters from $string starting at $position.
stringZ=abcABC123ABCabc
# 123456789......
# 1-based indexing.
echo `expr substr $stringZ 1 2` # ab
echo `expr substr $stringZ 4 3` # ABC
expr match "$string" '($substring)'
Extracts $substring at beginning of $string, where $substring is a regular expression.
expr "$string" : '($substring)'
Extracts $substring at beginning of $string, where $substring is a regular expression.
stringZ=abcABC123ABCabc
# =======
echo `expr match "$stringZ" '(.[b-c]*[A-Z]..[0-9])'` # abcABC1
echo `expr "$stringZ" : '(.[b-c]*[A-Z]..[0-9])'` # abcABC1
echo `expr "$stringZ" : '(.......)'` # abcABC1
# All of the above forms give an identical result.
expr match "$string" '.*($substring)'
Extracts $substring at end of $string, where $substring is a regular expression.
expr "$string" : '.*($substring)'
Extracts $substring at end of $string, where $substring is a regular expression.
stringZ=abcABC123ABCabc
# ======
echo `expr match "$stringZ" '.*([A-C][A-C][A-C][a-c]*)'` # ABCabc
echo `expr "$stringZ" : '.*(......)'` # ABCabc
Substring Removal
${string#substring}
Deletes shortest match of $substring from front of $string.
${string##substring}
Deletes longest match of $substring from front of $string.
stringZ=abcABC123ABCabc
Chapter 9. Variables Revisited 99](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-105-320.jpg)
![Advanced Bash-Scripting Guide
# |----| shortest
# |----------| longest
echo ${stringZ#a*C} # 123ABCabc
# Strip out shortest match between 'a' and 'C'.
echo ${stringZ##a*C} # abc
# Strip out longest match between 'a' and 'C'.
${string%substring}
Deletes shortest match of $substring from back of $string.
For example:
# Rename all filenames in $PWD with "TXT" suffix to a "txt" suffix.
# For example, "file1.TXT" becomes "file1.txt" . . .
SUFF=TXT
suff=txt
for i in $(ls *.$SUFF)
do
mv -f $i ${i%.$SUFF}.$suff
# Leave unchanged everything *except* the shortest pattern match
#+ starting from the right-hand-side of the variable $i . . .
done ### This could be condensed into a "one-liner" if desired.
# Thank you, Rory Winston.
${string%%substring}
Deletes longest match of $substring from back of $string.
stringZ=abcABC123ABCabc
# || shortest
# |------------| longest
echo ${stringZ%b*c} # abcABC123ABCa
# Strip out shortest match between 'b' and 'c', from back of $stringZ.
echo ${stringZ%%b*c} # a
# Strip out longest match between 'b' and 'c', from back of $stringZ.
This operator is useful for generating filenames.
Example 9-12. Converting graphic file formats, with filename change
#!/bin/bash
# cvt.sh:
# Converts all the MacPaint image files in a directory to "pbm" format.
# Uses the "macptopbm" binary from the "netpbm" package,
#+ which is maintained by Brian Henderson (bryanh@giraffe-data.com).
# Netpbm is a standard part of most Linux distros.
OPERATION=macptopbm
SUFFIX=pbm # New filename suffix.
if [ -n "$1" ]
then
directory=$1 # If directory name given as a script argument...
Chapter 9. Variables Revisited 100](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-106-320.jpg)
![Advanced Bash-Scripting Guide
else
directory=$PWD # Otherwise use current working directory.
fi
# Assumes all files in the target directory are MacPaint image files,
#+ with a ".mac" filename suffix.
for file in $directory/* # Filename globbing.
do
filename=${file%.*c} # Strip ".mac" suffix off filename
#+ ('.*c' matches everything
#+ between '.' and 'c', inclusive).
$OPERATION $file > "$filename.$SUFFIX"
# Redirect conversion to new filename.
rm -f $file # Delete original files after converting.
echo "$filename.$SUFFIX" # Log what is happening to stdout.
done
exit 0
# Exercise:
# --------
# As it stands, this script converts *all* the files in the current
#+ working directory.
# Modify it to work *only* on files with a ".mac" suffix.
Example 9-13. Converting streaming audio files to ogg
#!/bin/bash
# ra2ogg.sh: Convert streaming audio files (*.ra) to ogg.
# Uses the "mplayer" media player program:
# http://www.mplayerhq.hu/homepage
# Uses the "ogg" library and "oggenc":
# http://www.xiph.org/
#
# This script may need appropriate codecs installed, such as sipr.so ...
# Possibly also the compat-libstdc++ package.
OFILEPREF=${1%%ra} # Strip off the "ra" suffix.
OFILESUFF=wav # Suffix for wav file.
OUTFILE="$OFILEPREF""$OFILESUFF"
E_NOARGS=85
if [ -z "$1" ] # Must specify a filename to convert.
then
echo "Usage: `basename $0` [filename]"
exit $E_NOARGS
fi
##########################################################################
mplayer "$1" -ao pcm:file=$OUTFILE
oggenc "$OUTFILE" # Correct file extension automatically added by oggenc.
##########################################################################
rm "$OUTFILE" # Delete intermediate *.wav file.
# If you want to keep it, comment out above line.
exit $?
Chapter 9. Variables Revisited 101](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-107-320.jpg)
![Advanced Bash-Scripting Guide
# Note:
# ----
# On a Website, simply clicking on a *.ram streaming audio file
#+ usually only downloads the URL of the actual *.ra audio file.
# You can then use "wget" or something similar
#+ to download the *.ra file itself.
# Exercises:
# ---------
# As is, this script converts only *.ra filenames.
# Add flexibility by permitting use of *.ram and other filenames.
#
# If you're really ambitious, expand the script
#+ to do automatic downloads and conversions of streaming audio files.
# Given a URL, batch download streaming audio files (using "wget")
#+ and convert them on the fly.
A simple emulation of getopt using substring-extraction constructs.
Example 9-14. Emulating getopt
#!/bin/bash
# getopt-simple.sh
# Author: Chris Morgan
# Used in the ABS Guide with permission.
getopt_simple()
{
echo "getopt_simple()"
echo "Parameters are '$*'"
until [ -z "$1" ]
do
echo "Processing parameter of: '$1'"
if [ ${1:0:1} = '/' ]
then
tmp=${1:1} # Strip off leading '/' . . .
parameter=${tmp%%=*} # Extract name.
value=${tmp##*=} # Extract value.
echo "Parameter: '$parameter', value: '$value'"
eval $parameter=$value
fi
shift
done
}
# Pass all options to getopt_simple().
getopt_simple $*
echo "test is '$test'"
echo "test2 is '$test2'"
exit 0 # See also, UseGetOpt.sh, a modified versio of this script.
---
sh getopt_example.sh /test=value1 /test2=value2
Chapter 9. Variables Revisited 102](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-108-320.jpg)
![Advanced Bash-Scripting Guide
Parameters are '/test=value1 /test2=value2'
Processing parameter of: '/test=value1'
Parameter: 'test', value: 'value1'
Processing parameter of: '/test2=value2'
Parameter: 'test2', value: 'value2'
test is 'value1'
test2 is 'value2'
Substring Replacement
${string/substring/replacement}
Replace first match of $substring with $replacement. [41]
${string//substring/replacement}
Replace all matches of $substring with $replacement.
stringZ=abcABC123ABCabc
echo ${stringZ/abc/xyz} # xyzABC123ABCabc
# Replaces first match of 'abc' with 'xyz'.
echo ${stringZ//abc/xyz} # xyzABC123ABCxyz
# Replaces all matches of 'abc' with # 'xyz'.
echo ---------------
echo "$stringZ" # abcABC123ABCabc
echo ---------------
# The string itself is not altered!
# Can the match and replacement strings be parameterized?
match=abc
repl=000
echo ${stringZ/$match/$repl} # 000ABC123ABCabc
# ^ ^ ^^^
echo ${stringZ//$match/$repl} # 000ABC123ABC000
# Yes! ^ ^ ^^^ ^^^
echo
# What happens if no $replacement string is supplied?
echo ${stringZ/abc} # ABC123ABCabc
echo ${stringZ//abc} # ABC123ABC
# A simple deletion takes place.
${string/#substring/replacement}
If $substring matches front end of $string, substitute $replacement for $substring.
${string/%substring/replacement}
If $substring matches back end of $string, substitute $replacement for $substring.
stringZ=abcABC123ABCabc
echo ${stringZ/#abc/XYZ} # XYZABC123ABCabc
# Replaces front-end match of 'abc' with 'XYZ'.
echo ${stringZ/%abc/XYZ} # abcABC123ABCXYZ
# Replaces back-end match of 'abc' with 'XYZ'.
Chapter 9. Variables Revisited 103](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-109-320.jpg)
![Advanced Bash-Scripting Guide
# Once again:
variable=
# variable has been declared, but is set to null.
echo "${variable-0}" # (no output)
echo "${variable:-1}" # 1
# ^
unset variable
echo "${variable-2}" # 2
echo "${variable:-3}" # 3
exit 0
The default parameter construct finds use in providing "missing" command-line arguments in scripts.
DEFAULT_FILENAME=generic.data
filename=${1:-$DEFAULT_FILENAME}
# If not otherwise specified, the following command block operates
#+ on the file "generic.data".
# Begin-Command-Block
# ...
# ...
# ...
# End-Command-Block
# From "hanoi2.bash" example:
DISKS=${1:-E_NOPARAM} # Must specify how many disks.
# Set $DISKS to $1 command-line-parameter,
#+ or to $E_NOPARAM if that is unset.
See also Example 3-4, Example 28-2, and Example A-6.
Compare this method with using an and list to supply a default command-line argument.
${parameter=default}, ${parameter:=default}
If parameter not set, set it to default.
Both forms nearly equivalent. The : makes a difference only when $parameter has been declared
and is null, [42] as above.
echo ${username=`whoami`}
# Variable "username" is now set to `whoami`.
${parameter+alt_value}, ${parameter:+alt_value}
If parameter set, use alt_value, else use null string.
Both forms nearly equivalent. The : makes a difference only when parameter has been declared
and is null, see below.
echo "###### ${parameter+alt_value} ########"
echo
a=${param1+xyz}
echo "a = $a" # a =
Chapter 9. Variables Revisited 106](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-112-320.jpg)
![Advanced Bash-Scripting Guide
◊ ${#*} and ${#@} give the number of positional parameters.
◊ For an array, ${#array[*]} and ${#array[@]} give the number of elements in
the array.
Example 9-18. Length of a variable
#!/bin/bash
# length.sh
E_NO_ARGS=65
if [ $# -eq 0 ] # Must have command-line args to demo script.
then
echo "Please invoke this script with one or more command-line arguments."
exit $E_NO_ARGS
fi
var01=abcdEFGH28ij
echo "var01 = ${var01}"
echo "Length of var01 = ${#var01}"
# Now, let's try embedding a space.
var02="abcd EFGH28ij"
echo "var02 = ${var02}"
echo "Length of var02 = ${#var02}"
echo "Number of command-line arguments passed to script = ${#@}"
echo "Number of command-line arguments passed to script = ${#*}"
exit 0
${var#Pattern}, ${var##Pattern}
${var#Pattern} Remove from $var the shortest part of $Pattern that matches the front end
of $var.
${var##Pattern} Remove from $var the longest part of $Pattern that matches the front end
of $var.
A usage illustration from Example A-7:
# Function from "days-between.sh" example. # Strips
leading zero(s) from argument passed.
strip_leading_zero () # Strip possible leading zero(s)
{ #+ from argument passed.
return=${1#0} # The "1" refers to "$1" -- passed arg.
} # The "0" is what to remove from "$1" -- strips zeros.
Manfred Schwarb's more elaborate variation of the above:
strip_leading_zero2 () # Strip possible leading zero(s), since otherwise
{ # Bash will interpret such numbers as octal values.
shopt -s extglob # Turn on extended globbing.
local val=${1##+(0)} # Use local variable, longest matching series of 0's.
shopt -u extglob # Turn off extended globbing.
_strip_leading_zero2=${val:-0}
# If input was 0, return 0 instead of "".
}
Chapter 9. Variables Revisited 109](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-115-320.jpg)
![Advanced Bash-Scripting Guide
a=${!xyz*} # Expands to *names* of declared variables
# ^ ^ ^ + beginning with "xyz".
echo "a = $a" # a = xyz23 xyz24
a=${!xyz@} # Same as above.
echo "a = $a" # a = xyz23 xyz24
echo "---"
abc23=something_else
b=${!abc*}
echo "b = $b" # b = abc23
c=${!b} # Now, the more familiar type of indirect reference.
echo $c # something_else
9.4. Typing variables: declare or typeset
The declare or typeset builtins, which are exact synonyms, permit modifying the properties of variables. This
is a very weak form of the typing [43] available in certain programming languages. The declare command is
specific to version 2 or later of Bash. The typeset command also works in ksh scripts.
declare/typeset options
-r readonly
(declare -r var1 works the same as readonly var1)
This is the rough equivalent of the C const type qualifier. An attempt to change the value of a
readonly variable fails with an error message.
declare -r var1=1
echo "var1 = $var1" # var1 = 1
(( var1++ )) # x.sh: line 4: var1: readonly variable
-i integer
declare -i number
# The script will treat subsequent occurrences of "number" as an integer.
number=3
echo "Number = $number" # Number = 3
number=three
echo "Number = $number" # Number = 0
# Tries to evaluate the string "three" as an integer.
Certain arithmetic operations are permitted for declared integer variables without the need for expr or
let.
n=6/3
echo "n = $n" # n = 6/3
declare -i n
n=6/3
echo "n = $n" # n = 2
-a array
Chapter 9. Variables Revisited 114](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-120-320.jpg)
![Advanced Bash-Scripting Guide
Using the declare builtin restricts the scope of a variable.
foo ()
{
FOO="bar"
}
bar ()
{
foo
echo $FOO
}
bar # Prints bar.
However . . .
foo (){
declare FOO="bar"
}
bar ()
{
foo
echo $FOO
}
bar # Prints nothing.
# Thank you, Michael Iatrou, for pointing this out.
9.4.1. Another use for declare
The declare command can be helpful in identifying variables, environmental or otherwise. This can be
especially useful with arrays.
bash$ declare | grep HOME
/home/bozo
bash$ zzy=68
bash$ declare | grep zzy
zzy=68
bash$ Colors=([0]="purple" [1]="reddish-orange" [2]="light green")
bash$ echo ${Colors[@]}
purple reddish-orange light green
bash$ declare | grep Colors
Colors=([0]="purple" [1]="reddish-orange" [2]="light green")
9.5. Indirect References
Chapter 9. Variables Revisited 116](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-122-320.jpg)
![Advanced Bash-Scripting Guide
# And, it gets even better.
# Consider the following snippet given a variable named getSparc,
#+ but no such variable getIa64:
chkMirrorArchs () {
arch="$1";
if [ "$(eval "echo ${$(echo get$(echo -ne $arch |
sed 's/^(.).*/1/g' | tr 'a-z' 'A-Z'; echo $arch |
sed 's/^.(.*)/1/g')):-false}")" = true ]
then
return 0;
else
return 1;
fi;
}
getSparc="true"
unset getIa64
chkMirrorArchs sparc
echo $? # 0
# True
chkMirrorArchs Ia64
echo $? # 1
# False
# Notes:
# -----
# Even the to-be-substituted variable name part is built explicitly.
# The parameters to the chkMirrorArchs calls are all lower case.
# The variable name is composed of two parts: "get" and "Sparc" . . .
Example 9-25. Passing an indirect reference to awk
#!/bin/bash
# Another version of the "column totaler" script
#+ that adds up a specified column (of numbers) in the target file.
# This one uses indirect references.
ARGS=2
E_WRONGARGS=85
if [ $# -ne "$ARGS" ] # Check for proper number of command-line args.
then
echo "Usage: `basename $0` filename column-number"
exit $E_WRONGARGS
fi
filename=$1 # Name of file to operate on.
column_number=$2 # Which column to total up.
#===== Same as original script, up to this point =====#
# A multi-line awk script is invoked by
# awk "
# ...
# ...
Chapter 9. Variables Revisited 119](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-125-320.jpg)
![Advanced Bash-Scripting Guide
# ...
# "
# Begin awk script.
# -------------------------------------------------
awk "
{ total += $${column_number} # Indirect reference
}
END {
print total
}
" "$filename"
# Note that awk doesn't need an eval preceding $$.
# -------------------------------------------------
# End awk script.
# Indirect variable reference avoids the hassles
#+ of referencing a shell variable within the embedded awk script.
# Thanks, Stephane Chazelas.
exit $?
This method of indirect referencing is a bit tricky. If the second order variable changes its value,
then the first order variable must be properly dereferenced (as in the above example).
Fortunately, the ${!variable} notation introduced with version 2 of Bash (see Example
34-2 and Example A-22) makes indirect referencing more intuitive.
Bash does not support pointer arithmetic, and this severely limits the usefulness of indirect referencing. In
fact, indirect referencing in a scripting language is, at best, something of an afterthought.
9.6. $RANDOM: generate random integer
$RANDOM is an internal Bash function (not a constant) that returns a pseudorandom [44] integer in the range 0
- 32767. It should not be used to generate an encryption key.
Example 9-26. Generating random numbers
#!/bin/bash
# $RANDOM returns a different random integer at each invocation.
# Nominal range: 0 - 32767 (signed 16-bit integer).
MAXCOUNT=10
count=1
echo
echo "$MAXCOUNT random numbers:"
echo "-----------------"
while [ "$count" -le $MAXCOUNT ] # Generate 10 ($MAXCOUNT) random integers.
do
Chapter 9. Variables Revisited 120](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-126-320.jpg)
![Advanced Bash-Scripting Guide
number=$RANDOM
echo $number
let "count += 1" # Increment count.
done
echo "-----------------"
# If you need a random int within a certain range, use the 'modulo' operator.
# This returns the remainder of a division operation.
RANGE=500
echo
number=$RANDOM
let "number %= $RANGE"
# ^^
echo "Random number less than $RANGE --- $number"
echo
# If you need a random integer greater than a lower bound,
#+ then set up a test to discard all numbers below that.
FLOOR=200
number=0 #initialize
while [ "$number" -le $FLOOR ]
do
number=$RANDOM
done
echo "Random number greater than $FLOOR --- $number"
echo
# Let's examine a simple alternative to the above loop, namely
# let "number = $RANDOM + $FLOOR"
# That would eliminate the while-loop and run faster.
# But, there might be a problem with that. What is it?
# Combine above two techniques to retrieve random number between two limits.
number=0 #initialize
while [ "$number" -le $FLOOR ]
do
number=$RANDOM
let "number %= $RANGE" # Scales $number down within $RANGE.
done
echo "Random number between $FLOOR and $RANGE --- $number"
echo
# Generate binary choice, that is, "true" or "false" value.
BINARY=2
T=1
number=$RANDOM
let "number %= $BINARY"
# Note that let "number >>= 14" gives a better random distribution
#+ (right shifts out everything except last binary digit).
Chapter 9. Variables Revisited 121](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-127-320.jpg)
![Advanced Bash-Scripting Guide
if [ "$number" -eq $T ]
then
echo "TRUE"
else
echo "FALSE"
fi
echo
# Generate a toss of the dice.
SPOTS=6 # Modulo 6 gives range 0 - 5.
# Incrementing by 1 gives desired range of 1 - 6.
# Thanks, Paulo Marcel Coelho Aragao, for the simplification.
die1=0
die2=0
# Would it be better to just set SPOTS=7 and not add 1? Why or why not?
# Tosses each die separately, and so gives correct odds.
let "die1 = $RANDOM % $SPOTS +1" # Roll first one.
let "die2 = $RANDOM % $SPOTS +1" # Roll second one.
# Which arithmetic operation, above, has greater precedence --
#+ modulo (%) or addition (+)?
let "throw = $die1 + $die2"
echo "Throw of the dice = $throw"
echo
exit 0
Example 9-27. Picking a random card from a deck
#!/bin/bash
# pick-card.sh
# This is an example of choosing random elements of an array.
# Pick a card, any card.
Suites="Clubs
Diamonds
Hearts
Spades"
Denominations="2
3
4
5
6
7
8
9
10
Jack
Queen
King
Ace"
Chapter 9. Variables Revisited 122](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-128-320.jpg)
![Advanced Bash-Scripting Guide
# Note variables spread over multiple lines.
suite=($Suites) # Read into array variable.
denomination=($Denominations)
num_suites=${#suite[*]} # Count how many elements.
num_denominations=${#denomination[*]}
echo -n "${denomination[$((RANDOM%num_denominations))]} of "
echo ${suite[$((RANDOM%num_suites))]}
# $bozo sh pick-cards.sh
# Jack of Clubs
# Thank you, "jipe," for pointing out this use of $RANDOM.
exit 0
Example 9-28. Brownian Motion Simulation
#!/bin/bash
# brownian.sh
# Author: Mendel Cooper
# Reldate: 10/26/07
# License: GPL3
# ----------------------------------------------------------------
# This script models Brownian motion:
#+ the random wanderings of tiny particles in a fluid,
#+ as they are buffeted by random currents and collisions.
#+ This is colloquially known as the "Drunkard's Walk."
# It can also be considered as a stripped-down simulation of a
#+ Galton Board, a slanted board with a pattern of pegs,
#+ down which rolls a succession of marbles, one at a time.
#+ At the bottom is a row of slots or catch basins in which
#+ the marbles come to rest at the end of their journey.
# Think of it as a kind of bare-bones Pachinko game.
# As you see by running the script,
#+ most of the marbles cluster around the center slot.
#+ This is consistent with the expected binomial distribution.
# As a Galton Board simulation, the script
#+ disregards such parameters as
#+ board tilt-angle, rolling friction of the marbles,
#+ angles of impact, and elasticity of the pegs.
# To what extent does this affect the accuracy of the simulation?
# ----------------------------------------------------------------
PASSES=500 # Number of particle interactions / marbles.
ROWS=10 # Number of "collisions" (or horiz. peg rows).
RANGE=3 # 0 - 2 output range from $RANDOM.
POS=0 # Left/right position.
RANDOM=$$ # Seeds the random number generator from PID
#+ of script.
declare -a Slots # Array holding cumulative results of passes.
NUMSLOTS=21 # Number of slots at bottom of board.
Chapter 9. Variables Revisited 123](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-129-320.jpg)
![Advanced Bash-Scripting Guide
Initialize_Slots () { # Zero out all elements of the array.
for i in $( seq $NUMSLOTS )
do
Slots[$i]=0
done
echo # Blank line at beginning of run.
}
Show_Slots () {
echo -n " "
for i in $( seq $NUMSLOTS ) # Pretty-print array elements.
do
printf "%3d" ${Slots[$i]} # Allot three spaces per result.
done
echo # Row of slots:
echo " |__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|"
echo " ^^"
echo # Note that if the count within any particular slot exceeds 99,
#+ it messes up the display.
# Running only(!) 500 passes usually avoids this.
}
Move () { # Move one unit right / left, or stay put.
Move=$RANDOM # How random is $RANDOM? Well, let's see ...
let "Move %= RANGE" # Normalize into range of 0 - 2.
case "$Move" in
0 ) ;; # Do nothing, i.e., stay in place.
1 ) ((POS--));; # Left.
2 ) ((POS++));; # Right.
* ) echo -n "Error ";; # Anomaly! (Should never occur.)
esac
}
Play () { # Single pass (inner loop).
i=0
while [ "$i" -lt "$ROWS" ] # One event per row.
do
Move
((i++));
done
SHIFT=11 # Why 11, and not 10?
let "POS += $SHIFT" # Shift "zero position" to center.
(( Slots[$POS]++ )) # DEBUG: echo $POS
}
Run () { # Outer loop.
p=0
while [ "$p" -lt "$PASSES" ]
do
Play
(( p++ ))
POS=0 # Reset to zero. Why?
done
Chapter 9. Variables Revisited 124](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-130-320.jpg)
![Advanced Bash-Scripting Guide
}
# --------------
# main ()
Initialize_Slots
Run
Show_Slots
# --------------
exit $?
# Exercises:
# ---------
# 1) Show the results in a vertical bar graph, or as an alternative,
#+ a scattergram.
# 2) Alter the script to use /dev/urandom instead of $RANDOM.
# Will this make the results more random?
Jipe points out a set of techniques for generating random numbers within a range.
# Generate random number between 6 and 30.
rnumber=$((RANDOM%25+6))
# Generate random number in the same 6 - 30 range,
#+ but the number must be evenly divisible by 3.
rnumber=$(((RANDOM%30/3+1)*3))
# Note that this will not work all the time.
# It fails if $RANDOM%30 returns 0.
# Frank Wang suggests the following alternative:
rnumber=$(( RANDOM%27/3*3+6 ))
Bill Gradwohl came up with an improved formula that works for positive numbers.
rnumber=$(((RANDOM%(max-min+divisibleBy))/divisibleBy*divisibleBy+min))
Here Bill presents a versatile function that returns a random number between two specified values.
Example 9-29. Random between values
#!/bin/bash
# random-between.sh
# Random number between two specified values.
# Script by Bill Gradwohl, with minor modifications by the document author.
# Used with permission.
randomBetween() {
# Generates a positive or negative random number
#+ between $min and $max
#+ and divisible by $divisibleBy.
# Gives a "reasonably random" distribution of return values.
#
# Bill Gradwohl - Oct 1, 2003
syntax() {
# Function embedded within function.
echo
echo "Syntax: randomBetween [min] [max] [multiple]"
Chapter 9. Variables Revisited 125](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-131-320.jpg)
![Advanced Bash-Scripting Guide
echo
echo -n "Expects up to 3 passed parameters, "
echo "but all are completely optional."
echo "min is the minimum value"
echo "max is the maximum value"
echo -n "multiple specifies that the answer must be "
echo "a multiple of this value."
echo " i.e. answer must be evenly divisible by this number."
echo
echo "If any value is missing, defaults area supplied as: 0 32767 1"
echo -n "Successful completion returns 0, "
echo "unsuccessful completion returns"
echo "function syntax and 1."
echo -n "The answer is returned in the global variable "
echo "randomBetweenAnswer"
echo -n "Negative values for any passed parameter are "
echo "handled correctly."
}
local min=${1:-0}
local max=${2:-32767}
local divisibleBy=${3:-1}
# Default values assigned, in case parameters not passed to function.
local x
local spread
# Let's make sure the divisibleBy value is positive.
[ ${divisibleBy} -lt 0 ] && divisibleBy=$((0-divisibleBy))
# Sanity check.
if [ $# -gt 3 -o ${divisibleBy} -eq 0 -o ${min} -eq ${max} ]; then
syntax
return 1
fi
# See if the min and max are reversed.
if [ ${min} -gt ${max} ]; then
# Swap them.
x=${min}
min=${max}
max=${x}
fi
# If min is itself not evenly divisible by $divisibleBy,
#+ then fix the min to be within range.
if [ $((min/divisibleBy*divisibleBy)) -ne ${min} ]; then
if [ ${min} -lt 0 ]; then
min=$((min/divisibleBy*divisibleBy))
else
min=$((((min/divisibleBy)+1)*divisibleBy))
fi
fi
# If max is itself not evenly divisible by $divisibleBy,
#+ then fix the max to be within range.
if [ $((max/divisibleBy*divisibleBy)) -ne ${max} ]; then
if [ ${max} -lt 0 ]; then
max=$((((max/divisibleBy)-1)*divisibleBy))
else
max=$((max/divisibleBy*divisibleBy))
fi
Chapter 9. Variables Revisited 126](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-132-320.jpg)
![Advanced Bash-Scripting Guide
fi
# ---------------------------------------------------------------------
# Now, to do the real work.
# Note that to get a proper distribution for the end points,
#+ the range of random values has to be allowed to go between
#+ 0 and abs(max-min)+divisibleBy, not just abs(max-min)+1.
# The slight increase will produce the proper distribution for the
#+ end points.
# Changing the formula to use abs(max-min)+1 will still produce
#+ correct answers, but the randomness of those answers is faulty in
#+ that the number of times the end points ($min and $max) are returned
#+ is considerably lower than when the correct formula is used.
# ---------------------------------------------------------------------
spread=$((max-min))
# Omair Eshkenazi points out that this test is unnecessary,
#+ since max and min have already been switched around.
[ ${spread} -lt 0 ] && spread=$((0-spread))
let spread+=divisibleBy
randomBetweenAnswer=$(((RANDOM%spread)/divisibleBy*divisibleBy+min))
return 0
# However, Paulo Marcel Coelho Aragao points out that
#+ when $max and $min are not divisible by $divisibleBy,
#+ the formula fails.
#
# He suggests instead the following formula:
# rnumber = $(((RANDOM%(max-min+1)+min)/divisibleBy*divisibleBy))
}
# Let's test the function.
min=-14
max=20
divisibleBy=3
# Generate an array of expected answers and check to make sure we get
#+ at least one of each answer if we loop long enough.
declare -a answer
minimum=${min}
maximum=${max}
if [ $((minimum/divisibleBy*divisibleBy)) -ne ${minimum} ]; then
if [ ${minimum} -lt 0 ]; then
minimum=$((minimum/divisibleBy*divisibleBy))
else
minimum=$((((minimum/divisibleBy)+1)*divisibleBy))
fi
fi
# If max is itself not evenly divisible by $divisibleBy,
#+ then fix the max to be within range.
if [ $((maximum/divisibleBy*divisibleBy)) -ne ${maximum} ]; then
if [ ${maximum} -lt 0 ]; then
Chapter 9. Variables Revisited 127](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-133-320.jpg)
![Advanced Bash-Scripting Guide
maximum=$((((maximum/divisibleBy)-1)*divisibleBy))
else
maximum=$((maximum/divisibleBy*divisibleBy))
fi
fi
# We need to generate only positive array subscripts,
#+ so we need a displacement that that will guarantee
#+ positive results.
disp=$((0-minimum))
for ((i=${minimum}; i<=${maximum}; i+=divisibleBy)); do
answer[i+disp]=0
done
# Now loop a large number of times to see what we get.
loopIt=1000 # The script author suggests 100000,
#+ but that takes a good long while.
for ((i=0; i<${loopIt}; ++i)); do
# Note that we are specifying min and max in reversed order here to
#+ make the function correct for this case.
randomBetween ${max} ${min} ${divisibleBy}
# Report an error if an answer is unexpected.
[ ${randomBetweenAnswer} -lt ${min} -o ${randomBetweenAnswer} -gt ${max} ]
&& echo MIN or MAX error - ${randomBetweenAnswer}!
[ $((randomBetweenAnswer%${divisibleBy})) -ne 0 ]
&& echo DIVISIBLE BY error - ${randomBetweenAnswer}!
# Store the answer away statistically.
answer[randomBetweenAnswer+disp]=$((answer[randomBetweenAnswer+disp]+1))
done
# Let's check the results
for ((i=${minimum}; i<=${maximum}; i+=divisibleBy)); do
[ ${answer[i+displacement]} -eq 0 ]
&& echo "We never got an answer of $i."
|| echo "${i} occurred ${answer[i+displacement]} times."
done
exit 0
Just how random is $RANDOM? The best way to test this is to write a script that tracks the distribution of
"random" numbers generated by $RANDOM. Let's roll a $RANDOM die a few times . . .
Example 9-30. Rolling a single die with RANDOM
#!/bin/bash
# How random is RANDOM?
RANDOM=$$ # Reseed the random number generator using script process ID.
Chapter 9. Variables Revisited 128](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-134-320.jpg)
![Advanced Bash-Scripting Guide
PIPS=6 # A die has 6 pips.
MAXTHROWS=600 # Increase this if you have nothing better to do with your time.
throw=0 # Throw count.
ones=0 # Must initialize counts to zero,
twos=0 #+ since an uninitialized variable is null, not zero.
threes=0
fours=0
fives=0
sixes=0
print_result ()
{
echo
echo "ones = $ones"
echo "twos = $twos"
echo "threes = $threes"
echo "fours = $fours"
echo "fives = $fives"
echo "sixes = $sixes"
echo
}
update_count()
{
case "$1" in
0) let "ones += 1";; # Since die has no "zero", this corresponds to 1.
1) let "twos += 1";; # And this to 2, etc.
2) let "threes += 1";;
3) let "fours += 1";;
4) let "fives += 1";;
5) let "sixes += 1";;
esac
}
echo
while [ "$throw" -lt "$MAXTHROWS" ]
do
let "die1 = RANDOM % $PIPS"
update_count $die1
let "throw += 1"
done
print_result
exit 0
# The scores should distribute fairly evenly, assuming RANDOM is fairly random.
# With $MAXTHROWS at 600, all should cluster around 100, plus-or-minus 20 or so.
#
# Keep in mind that RANDOM is a pseudorandom generator,
#+ and not a spectacularly good one at that.
# Randomness is a deep and complex subject.
# Sufficiently long "random" sequences may exhibit
#+ chaotic and other "non-random" behavior.
# Exercise (easy):
# ---------------
Chapter 9. Variables Revisited 129](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-135-320.jpg)
![Advanced Bash-Scripting Guide
# Rewrite this script to flip a coin 1000 times.
# Choices are "HEADS" and "TAILS".
As we have seen in the last example, it is best to reseed the RANDOM generator each time it is invoked. Using
the same seed for RANDOM repeats the same series of numbers. [45] (This mirrors the behavior of the
random() function in C.)
Example 9-31. Reseeding RANDOM
#!/bin/bash
# seeding-random.sh: Seeding the RANDOM variable.
MAXCOUNT=25 # How many numbers to generate.
random_numbers ()
{
count=0
while [ "$count" -lt "$MAXCOUNT" ]
do
number=$RANDOM
echo -n "$number "
let "count += 1"
done
}
echo; echo
RANDOM=1 # Setting RANDOM seeds the random number generator.
random_numbers
echo; echo
RANDOM=1 # Same seed for RANDOM...
random_numbers # ...reproduces the exact same number series.
#
# When is it useful to duplicate a "random" number series?
echo; echo
RANDOM=2 # Trying again, but with a different seed...
random_numbers # gives a different number series.
echo; echo
# RANDOM=$$ seeds RANDOM from process id of script.
# It is also possible to seed RANDOM from 'time' or 'date' commands.
# Getting fancy...
SEED=$(head -1 /dev/urandom | od -N 1 | awk '{ print $2 }')
# Pseudo-random output fetched
#+ from /dev/urandom (system pseudo-random device-file),
#+ then converted to line of printable (octal) numbers by "od",
#+ finally "awk" retrieves just one number for SEED.
RANDOM=$SEED
random_numbers
echo; echo
exit 0
Chapter 9. Variables Revisited 130](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-136-320.jpg)
![Chapter 10. Loops and Branches
What needs this iteration, woman?
--Shakespeare, Othello
Operations on code blocks are the key to structured and organized shell scripts. Looping and branching
constructs provide the tools for accomplishing this.
10.1. Loops
A loop is a block of code that iterates [46] a list of commands as long as the loop control condition is true.
for loops
for arg in [list]
This is the basic looping construct. It differs significantly from its C counterpart.
for arg in [list]
do
command(s)...
done
During each pass through the loop, arg takes on the value of each successive variable
in the list.
for arg in "$var1" "$var2" "$var3" ... "$varN"
# In pass 1 of the loop, arg = $var1
# In pass 2 of the loop, arg = $var2
# In pass 3 of the loop, arg = $var3
# ...
# In pass N of the loop, arg = $varN
# Arguments in [list] quoted to prevent possible word splitting.
The argument list may contain wild cards.
If do is on same line as for, there needs to be a semicolon after list.
for arg in [list] ; do
Example 10-1. Simple for loops
#!/bin/bash
# Listing the planets.
for planet in Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune Pluto
do
echo $planet # Each planet on a separate line.
Chapter 10. Loops and Branches 134](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-140-320.jpg)
![Advanced Bash-Scripting Guide
done
echo; echo
for planet in "Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune Pluto"
# All planets on same line.
# Entire 'list' enclosed in quotes creates a single variable.
# Why? Whitespace incorporated into the variable.
do
echo $planet
done
echo; echo "Whoops! Pluto is no longer a planet!"
exit 0
Each [list] element may contain multiple parameters. This is useful when processing parameters
in groups. In such cases, use the set command (see Example 14-16) to force parsing of each [list]
element and assignment of each component to the positional parameters.
Example 10-2. for loop with two parameters in each [list] element
#!/bin/bash
# Planets revisited.
# Associate the name of each planet with its distance from the sun.
for planet in "Mercury 36" "Venus 67" "Earth 93" "Mars 142" "Jupiter 483"
do
set -- $planet # Parses variable "planet"
#+ and sets positional parameters.
# The "--" prevents nasty surprises if $planet is null or
#+ begins with a dash.
# May need to save original positional parameters,
#+ since they get overwritten.
# One way of doing this is to use an array,
# original_params=("$@")
echo "$1 $2,000,000 miles from the sun"
#-------two tabs---concatenate zeroes onto parameter $2
done
# (Thanks, S.C., for additional clarification.)
exit 0
A variable may supply the [list] in a for loop.
Example 10-3. Fileinfo: operating on a file list contained in a variable
#!/bin/bash
# fileinfo.sh
FILES="/usr/sbin/accept
/usr/sbin/pwck
Chapter 10. Loops and Branches 135](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-141-320.jpg)
![Advanced Bash-Scripting Guide
/usr/sbin/chroot
/usr/bin/fakefile
/sbin/badblocks
/sbin/ypbind" # List of files you are curious about.
# Threw in a dummy file, /usr/bin/fakefile.
echo
for file in $FILES
do
if [ ! -e "$file" ] # Check if file exists.
then
echo "$file does not exist."; echo
continue # On to next.
fi
ls -l $file | awk '{ print $8 " file size: " $5 }' # Print 2 fields.
whatis `basename $file` # File info.
# Note that the whatis database needs to have been set up for this to work.
# To do this, as root run /usr/bin/makewhatis.
echo
done
exit 0
If the [list] in a for loop contains wild cards (* and ?) used in filename expansion, then globbing
takes place.
Example 10-4. Operating on files with a for loop
#!/bin/bash
# list-glob.sh: Generating [list] in a for-loop, using "globbing"
echo
for file in *
# ^ Bash performs filename expansion
#+ on expressions that globbing recognizes.
do
ls -l "$file" # Lists all files in $PWD (current directory).
# Recall that the wild card character "*" matches every filename,
#+ however, in "globbing," it doesn't match dot-files.
# If the pattern matches no file, it is expanded to itself.
# To prevent this, set the nullglob option
#+ (shopt -s nullglob).
# Thanks, S.C.
done
echo; echo
for file in [jx]*
do
rm -f $file # Removes only files beginning with "j" or "x" in $PWD.
echo "Removed file "$file"".
done
echo
Chapter 10. Loops and Branches 136](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-142-320.jpg)
![Advanced Bash-Scripting Guide
exit 0
Omitting the in [list] part of a for loop causes the loop to operate on $@ -- the positional
parameters. A particularly clever illustration of this is Example A-15. See also Example 14-17.
Example 10-5. Missing in [list] in a for loop
#!/bin/bash
# Invoke this script both with and without arguments,
#+ and see what happens.
for a
do
echo -n "$a "
done
# The 'in list' missing, therefore the loop operates on '$@'
#+ (command-line argument list, including whitespace).
echo
exit 0
It is possible to use command substitution to generate the [list] in a for loop. See also Example
15-54, Example 10-10 and Example 15-48.
Example 10-6. Generating the [list] in a for loop with command substitution
#!/bin/bash
# for-loopcmd.sh: for-loop with [list]
#+ generated by command substitution.
NUMBERS="9 7 3 8 37.53"
for number in `echo $NUMBERS` # for number in 9 7 3 8 37.53
do
echo -n "$number "
done
echo
exit 0
Here is a somewhat more complex example of using command substitution to create the [list].
Example 10-7. A grep replacement for binary files
#!/bin/bash
# bin-grep.sh: Locates matching strings in a binary file.
# A "grep" replacement for binary files.
# Similar effect to "grep -a"
E_BADARGS=65
Chapter 10. Loops and Branches 137](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-143-320.jpg)
![Advanced Bash-Scripting Guide
E_NOFILE=66
if [ $# -ne 2 ]
then
echo "Usage: `basename $0` search_string filename"
exit $E_BADARGS
fi
if [ ! -f "$2" ]
then
echo "File "$2" does not exist."
exit $E_NOFILE
fi
IFS=$'012' # Per suggestion of Anton Filippov.
# was: IFS="n"
for word in $( strings "$2" | grep "$1" )
# The "strings" command lists strings in binary files.
# Output then piped to "grep", which tests for desired string.
do
echo $word
done
# As S.C. points out, lines 23 - 30 could be replaced with the simpler
# strings "$2" | grep "$1" | tr -s "$IFS" '[n*]'
# Try something like "./bin-grep.sh mem /bin/ls"
#+ to exercise this script.
exit 0
More of the same.
Example 10-8. Listing all users on the system
#!/bin/bash
# userlist.sh
PASSWORD_FILE=/etc/passwd
n=1 # User number
for name in $(awk 'BEGIN{FS=":"}{print $1}' < "$PASSWORD_FILE" )
# Field separator = : ^^^^^^
# Print first field ^^^^^^^^
# Get input from password file ^^^^^^^^^^^^^^^^^
do
echo "USER #$n = $name"
let "n += 1"
done
# USER #1 = root
# USER #2 = bin
# USER #3 = daemon
# ...
# USER #30 = bozo
exit 0
Chapter 10. Loops and Branches 138](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-144-320.jpg)
![Advanced Bash-Scripting Guide
# Exercise:
# --------
# How is it that an ordinary user (or a script run by same)
#+ can read /etc/passwd?
# Isn't this a security hole? Why or why not?
Yet another example of the [list] resulting from command substitution.
Example 10-9. Checking all the binaries in a directory for authorship
#!/bin/bash
# findstring.sh:
# Find a particular string in the binaries in a specified directory.
directory=/usr/bin/
fstring="Free Software Foundation" # See which files come from the FSF.
for file in $( find $directory -type f -name '*' | sort )
do
strings -f $file | grep "$fstring" | sed -e "s%$directory%%"
# In the "sed" expression,
#+ it is necessary to substitute for the normal "/" delimiter
#+ because "/" happens to be one of the characters filtered out.
# Failure to do so gives an error message. (Try it.)
done
exit $?
# Exercise (easy):
# ---------------
# Convert this script to take command-line parameters
#+ for $directory and $fstring.
A final example of [list] / command substitution, but this time the "command" is a function.
generate_list ()
{
echo "one two three"
}
for word in $(generate_list) # Let "word" grab output of function.
do
echo "$word"
done
# one
# two
# three
The output of a for loop may be piped to a command or commands.
Example 10-10. Listing the symbolic links in a directory
#!/bin/bash
# symlinks.sh: Lists symbolic links in a directory.
directory=${1-`pwd`}
Chapter 10. Loops and Branches 139](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-145-320.jpg)
![Advanced Bash-Scripting Guide
# Defaults to current working directory,
#+ if not otherwise specified.
# Equivalent to code block below.
# ----------------------------------------------------------
# ARGS=1 # Expect one command-line argument.
#
# if [ $# -ne "$ARGS" ] # If not 1 arg...
# then
# directory=`pwd` # current working directory
# else
# directory=$1
# fi
# ----------------------------------------------------------
echo "symbolic links in directory "$directory""
for file in "$( find $directory -type l )" # -type l = symbolic links
do
echo "$file"
done | sort # Otherwise file list is unsorted.
# Strictly speaking, a loop isn't really necessary here,
#+ since the output of the "find" command is expanded into a single word.
# However, it's easy to understand and illustrative this way.
# As Dominik 'Aeneas' Schnitzer points out,
#+ failing to quote $( find $directory -type l )
#+ will choke on filenames with embedded whitespace.
# containing whitespace.
exit 0
# --------------------------------------------------------
# Jean Helou proposes the following alternative:
echo "symbolic links in directory "$directory""
# Backup of the current IFS. One can never be too cautious.
OLDIFS=$IFS
IFS=:
for file in $(find $directory -type l -printf "%p$IFS")
do # ^^^^^^^^^^^^^^^^
echo "$file"
done|sort
# And, James "Mike" Conley suggests modifying Helou's code thusly:
OLDIFS=$IFS
IFS='' # Null IFS means no word breaks
for file in $( find $directory -type l )
do
echo $file
done | sort
# This works in the "pathological" case of a directory name having
#+ an embedded colon.
# "This also fixes the pathological case of the directory name having
#+ a colon (or space in earlier example) as well."
The stdout of a loop may be redirected to a file, as this slight modification to the previous example
shows.
Chapter 10. Loops and Branches 140](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-146-320.jpg)
![Advanced Bash-Scripting Guide
echo; echo
# +==========================================+
# Now, let's do the same, using C-like syntax.
LIMIT=10
for ((a=1; a <= LIMIT ; a++)) # Double parentheses, and "LIMIT" with no "$".
do
echo -n "$a "
done # A construct borrowed from 'ksh93'.
echo; echo
# +=========================================================================+
# Let's use the C "comma operator" to increment two variables simultaneously.
for ((a=1, b=1; a <= LIMIT ; a++, b++))
do # The comma chains together operations.
echo -n "$a-$b "
done
echo; echo
exit 0
See also Example 26-16, Example 26-17, and Example A-6.
---
Now, a for loop used in a "real-life" context.
Example 10-13. Using efax in batch mode
#!/bin/bash
# Faxing (must have 'efax' package installed).
EXPECTED_ARGS=2
E_BADARGS=85
MODEM_PORT="/dev/ttyS2" # May be different on your machine.
# ^^^^^ PCMCIA modem card default port.
if [ $# -ne $EXPECTED_ARGS ]
# Check for proper number of command-line args.
then
echo "Usage: `basename $0` phone# text-file"
exit $E_BADARGS
fi
if [ ! -f "$2" ]
then
echo "File $2 is not a text file."
# File is not a regular file, or does not exist.
exit $E_BADARGS
fi
Chapter 10. Loops and Branches 142](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-148-320.jpg)
![Advanced Bash-Scripting Guide
fax make $2 # Create fax-formatted files from text files.
for file in $(ls $2.0*) # Concatenate the converted files.
# Uses wild card (filename "globbing")
#+ in variable list.
do
fil="$fil $file"
done
efax -d "$MODEM_PORT" -t "T$1" $fil # Finally, do the work.
# Trying adding -o1 if above line fails.
# As S.C. points out, the for-loop can be eliminated with
# efax -d /dev/ttyS2 -o1 -t "T$1" $2.0*
#+ but it's not quite as instructive [grin].
exit $? # Also, efax sends diagnostic messages to stdout.
while
This construct tests for a condition at the top of a loop, and keeps looping as long as that condition is
true (returns a 0 exit status). In contrast to a for loop, a while loop finds use in situations where the
number of loop repetitions is not known beforehand.
while [ condition ]
do
command(s)...
done
The bracket construct in a while loop is nothing more than our old friend, the test brackets used in an
if/then test. In fact, a while loop can legally use the more versatile double-brackets construct (while [[
condition ]]).
As is the case with for loops, placing the do on the same line as the condition test requires a
semicolon.
while [ condition ] ; do
Note that the test brackets are not mandatory in a while loop. See, for example, the getopts construct.
Example 10-14. Simple while loop
#!/bin/bash
var0=0
LIMIT=10
while [ "$var0" -lt "$LIMIT" ]
# ^ ^
# Spaces, because these are "test-brackets" . . .
do
echo -n "$var0 " # -n suppresses newline.
# ^ Space, to separate printed out numbers.
Chapter 10. Loops and Branches 143](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-149-320.jpg)
![Advanced Bash-Scripting Guide
var0=`expr $var0 + 1` # var0=$(($var0+1)) also works.
# var0=$((var0 + 1)) also works.
# let "var0 += 1" also works.
done # Various other methods also work.
echo
exit 0
Example 10-15. Another while loop
#!/bin/bash
echo
# Equivalent to:
while [ "$var1" != "end" ] # while test "$var1" != "end"
do
echo "Input variable #1 (end to exit) "
read var1 # Not 'read $var1' (why?).
echo "variable #1 = $var1" # Need quotes because of "#" . . .
# If input is 'end', echoes it here.
# Does not test for termination condition until top of loop.
echo
done
exit 0
A while loop may have multiple conditions. Only the final condition determines when the loop
terminates. This necessitates a slightly different loop syntax, however.
Example 10-16. while loop with multiple conditions
#!/bin/bash
var1=unset
previous=$var1
while echo "previous-variable = $previous"
echo
previous=$var1
[ "$var1" != end ] # Keeps track of what $var1 was previously.
# Four conditions on "while", but only last one controls loop.
# The *last* exit status is the one that counts.
do
echo "Input variable #1 (end to exit) "
read var1
echo "variable #1 = $var1"
done
# Try to figure out how this all works.
# It's a wee bit tricky.
exit 0
As with a for loop, a while loop may employ C-style syntax by using the double-parentheses construct
(see also Example 9-33).
Chapter 10. Loops and Branches 144](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-150-320.jpg)
![Advanced Bash-Scripting Guide
Example 10-17. C-style syntax in a while loop
#!/bin/bash
# wh-loopc.sh: Count to 10 in a "while" loop.
LIMIT=10
a=1
while [ "$a" -le $LIMIT ]
do
echo -n "$a "
let "a+=1"
done # No surprises, so far.
echo; echo
# +=================================================================+
# Now, repeat with C-like syntax.
((a = 1)) # a=1
# Double parentheses permit space when setting a variable, as in C.
while (( a <= LIMIT )) # Double parentheses, and no "$" preceding variables.
do
echo -n "$a "
((a += 1)) # let "a+=1"
# Yes, indeed.
# Double parentheses permit incrementing a variable with C-like syntax.
done
echo
# C programmers can feel right at home in Bash.
exit 0
Inside its test brackets, a while loop can call a function.
t=0
condition ()
{
((t++))
if [ $t -lt 5 ]
then
return 0 # true
else
return 1 # false
fi
}
while condition
# ^^^^^^^^^
# Function call -- four loop iterations.
do
echo "Still going: t = $t"
done
# Still going: t = 1
Chapter 10. Loops and Branches 145](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-151-320.jpg)
![Advanced Bash-Scripting Guide
# Still going: t = 2
# Still going: t = 3
# Still going: t = 4
Similar to the if-test construct, a while loop can omit the test brackets.
while condition
do
command(s) ...
done
By coupling the power of the read command with a while loop, we get the handy while read construct,
useful for reading and parsing files.
cat $filename | # Supply input from a file.
while read line # As long as there is another line to read ...
do
...
done
# =========== Snippet from "sd.sh" example script ========== #
while read value # Read one data point at a time.
do
rt=$(echo "scale=$SC; $rt + $value" | bc)
(( ct++ ))
done
am=$(echo "scale=$SC; $rt / $ct" | bc)
echo $am; return $ct # This function "returns" TWO values!
# Caution: This little trick will not work if $ct > 255!
# To handle a larger number of data points,
#+ simply comment out the "return $ct" above.
} <"$datafile" # Feed in data file.
A while loop may have its stdin redirected to a file by a < at its end.
A while loop may have its stdin supplied by a pipe.
until
This construct tests for a condition at the top of a loop, and keeps looping as long as that condition is
false (opposite of while loop).
until [ condition-is-true ]
do
command(s)...
done
Note that an until loop tests for the terminating condition at the top of the loop, differing from a
similar construct in some programming languages.
As is the case with for loops, placing the do on the same line as the condition test requires a
semicolon.
Chapter 10. Loops and Branches 146](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-152-320.jpg)
![Advanced Bash-Scripting Guide
until [ condition-is-true ] ; do
Example 10-18. until loop
#!/bin/bash
END_CONDITION=end
until [ "$var1" = "$END_CONDITION" ]
# Tests condition here, at top of loop.
do
echo "Input variable #1 "
echo "($END_CONDITION to exit)"
read var1
echo "variable #1 = $var1"
echo
done
# ------------------------------------------- #
# As with "for" and "while" loops,
#+ an "until" loop permits C-like test constructs.
LIMIT=10
var=0
until (( var > LIMIT ))
do # ^^ ^ ^ ^^ No brackets, no $ prefixing variables.
echo -n "$var "
(( var++ ))
done # 0 1 2 3 4 5 6 7 8 9 10
exit 0
How to choose between a for loop or a while loop or until loop? In C, you would typically use a for loop
when the number of loop iterations is known beforehand. With Bash, however, the situation is fuzzier. The
Bash for loop is more loosely structured and more flexible than its equivalent in other languages. Therefore,
feel free to use whatever type of loop gets the job done in the simplest way.
10.2. Nested Loops
A nested loop is a loop within a loop, an inner loop within the body of an outer one. How this works is that
the first pass of the outer loop triggers the inner loop, which executes to completion. Then the second pass of
the outer loop triggers the inner loop again. This repeats until the outer loop finishes. Of course, a break
within either the inner or outer loop would interrupt this process.
Example 10-19. Nested Loop
#!/bin/bash
# nested-loop.sh: Nested "for" loops.
outer=1 # Set outer loop counter.
Chapter 10. Loops and Branches 147](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-153-320.jpg)
![Advanced Bash-Scripting Guide
# Beginning of outer loop.
for a in 1 2 3 4 5
do
echo "Pass $outer in outer loop."
echo "---------------------"
inner=1 # Reset inner loop counter.
# ===============================================
# Beginning of inner loop.
for b in 1 2 3 4 5
do
echo "Pass $inner in inner loop."
let "inner+=1" # Increment inner loop counter.
done
# End of inner loop.
# ===============================================
let "outer+=1" # Increment outer loop counter.
echo # Space between output blocks in pass of outer loop.
done
# End of outer loop.
exit 0
See Example 26-11 for an illustration of nested while loops, and Example 26-13 to see a while loop nested
inside an until loop.
10.3. Loop Control
Tournez cent tours, tournez mille tours,
Tournez souvent et tournez toujours . . .
--Verlaine, "Chevaux de bois"
Commands affecting loop behavior
break, continue
The break and continue loop control commands [47] correspond exactly to their counterparts in other
programming languages. The break command terminates the loop (breaks out of it), while continue
causes a jump to the next iteration of the loop, skipping all the remaining commands in that particular
loop cycle.
Example 10-20. Effects of break and continue in a loop
#!/bin/bash
LIMIT=19 # Upper limit
echo
echo "Printing Numbers 1 through 20 (but not 3 and 11)."
a=0
while [ $a -le "$LIMIT" ]
Chapter 10. Loops and Branches 148](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-154-320.jpg)
![Advanced Bash-Scripting Guide
do
a=$(($a+1))
if [ "$a" -eq 3 ] || [ "$a" -eq 11 ] # Excludes 3 and 11.
then
continue # Skip rest of this particular loop iteration.
fi
echo -n "$a " # This will not execute for 3 and 11.
done
# Exercise:
# Why does the loop print up to 20?
echo; echo
echo Printing Numbers 1 through 20, but something happens after 2.
##################################################################
# Same loop, but substituting 'break' for 'continue'.
a=0
while [ "$a" -le "$LIMIT" ]
do
a=$(($a+1))
if [ "$a" -gt 2 ]
then
break # Skip entire rest of loop.
fi
echo -n "$a "
done
echo; echo; echo
exit 0
The break command may optionally take a parameter. A plain break terminates only the innermost
loop in which it is embedded, but a break N breaks out of N levels of loop.
Example 10-21. Breaking out of multiple loop levels
#!/bin/bash
# break-levels.sh: Breaking out of loops.
# "break N" breaks out of N level loops.
for outerloop in 1 2 3 4 5
do
echo -n "Group $outerloop: "
# --------------------------------------------------------
for innerloop in 1 2 3 4 5
do
echo -n "$innerloop "
Chapter 10. Loops and Branches 149](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-155-320.jpg)
![Advanced Bash-Scripting Guide
if [ "$innerloop" -eq 3 ]
then
break # Try break 2 to see what happens.
# ("Breaks" out of both inner and outer loops.)
fi
done
# --------------------------------------------------------
echo
done
echo
exit 0
The continue command, similar to break, optionally takes a parameter. A plain continue cuts short
the current iteration within its loop and begins the next. A continue N terminates all remaining
iterations at its loop level and continues with the next iteration at the loop, N levels above.
Example 10-22. Continuing at a higher loop level
#!/bin/bash
# The "continue N" command, continuing at the Nth level loop.
for outer in I II III IV V # outer loop
do
echo; echo -n "Group $outer: "
# --------------------------------------------------------------------
for inner in 1 2 3 4 5 6 7 8 9 10 # inner loop
do
if [[ "$inner" -eq 7 && "$outer" = "III" ]]
then
continue 2 # Continue at loop on 2nd level, that is "outer loop".
# Replace above line with a simple "continue"
# to see normal loop behavior.
fi
echo -n "$inner " # 7 8 9 10 will not echo on "Group III."
done
# --------------------------------------------------------------------
done
echo; echo
# Exercise:
# Come up with a meaningful use for "continue N" in a script.
exit 0
Example 10-23. Using continue N in an actual task
# Albert Reiner gives an example of how to use "continue N":
# ---------------------------------------------------------
# Suppose I have a large number of jobs that need to be run, with
#+ any data that is to be treated in files of a given name pattern in a
Chapter 10. Loops and Branches 150](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-156-320.jpg)
![Advanced Bash-Scripting Guide
#+ directory. There are several machines that access this directory, and
#+ I want to distribute the work over these different boxen. Then I
#+ usually nohup something like the following on every box:
while true
do
for n in .iso.*
do
[ "$n" = ".iso.opts" ] && continue
beta=${n#.iso.}
[ -r .Iso.$beta ] && continue
[ -r .lock.$beta ] && sleep 10 && continue
lockfile -r0 .lock.$beta || continue
echo -n "$beta: " `date`
run-isotherm $beta
date
ls -alF .Iso.$beta
[ -r .Iso.$beta ] && rm -f .lock.$beta
continue 2
done
break
done
# The details, in particular the sleep N, are particular to my
#+ application, but the general pattern is:
while true
do
for job in {pattern}
do
{job already done or running} && continue
{mark job as running, do job, mark job as done}
continue 2
done
break # Or something like `sleep 600' to avoid termination.
done
# This way the script will stop only when there are no more jobs to do
#+ (including jobs that were added during runtime). Through the use
#+ of appropriate lockfiles it can be run on several machines
#+ concurrently without duplication of calculations [which run a couple
#+ of hours in my case, so I really want to avoid this]. Also, as search
#+ always starts again from the beginning, one can encode priorities in
#+ the file names. Of course, one could also do this without `continue 2',
#+ but then one would have to actually check whether or not some job
#+ was done (so that we should immediately look for the next job) or not
#+ (in which case we terminate or sleep for a long time before checking
#+ for a new job).
The continue N construct is difficult to understand and tricky to use in any
meaningful context. It is probably best avoided.
10.4. Testing and Branching
The case and select constructs are technically not loops, since they do not iterate the execution of a code
block. Like loops, however, they direct program flow according to conditions at the top or bottom of the
block.
Chapter 10. Loops and Branches 151](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-157-320.jpg)
![Advanced Bash-Scripting Guide
Controlling program flow in a code block
case (in) / esac
The case construct is the shell scripting analog to switch in C/C++. It permits branching to one of a
number of code blocks, depending on condition tests. It serves as a kind of shorthand for multiple
if/then/else statements and is an appropriate tool for creating menus.
case "$variable" in
"$condition1" )
command...
;;
"$condition2" )
command...
;;
esac
◊ Quoting the variables is not mandatory, since word splitting does not take
place.
◊ Each test line ends with a right paren ).
◊ Each condition block ends with a double semicolon ;;.
◊ If a condition tests true, then the associated commands execute and the case
block terminates.
◊ The entire case block ends with an esac (case spelled backwards).
Example 10-24. Using case
#!/bin/bash
# Testing ranges of characters.
echo; echo "Hit a key, then hit return."
read Keypress
case "$Keypress" in
[[:lower:]] ) echo "Lowercase letter";;
[[:upper:]] ) echo "Uppercase letter";;
[0-9] ) echo "Digit";;
* ) echo "Punctuation, whitespace, or other";;
esac # Allows ranges of characters in [square brackets],
#+ or POSIX ranges in [[double square brackets.
# In the first version of this example,
#+ the tests for lowercase and uppercase characters were
#+ [a-z] and [A-Z].
# This no longer works in certain locales and/or Linux distros.
# POSIX is more portable.
# Thanks to Frank Wang for pointing this out.
# Exercise:
# --------
# As the script stands, it accepts a single keystroke, then terminates.
Chapter 10. Loops and Branches 152](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-158-320.jpg)
![Advanced Bash-Scripting Guide
# Change the script so it accepts repeated input,
#+ reports on each keystroke, and terminates only when "X" is hit.
# Hint: enclose everything in a "while" loop.
exit 0
Example 10-25. Creating menus using case
#!/bin/bash
# Crude address database
clear # Clear the screen.
echo " Contact List"
echo " ------- ----"
echo "Choose one of the following persons:"
echo
echo "[E]vans, Roland"
echo "[J]ones, Mildred"
echo "[S]mith, Julie"
echo "[Z]ane, Morris"
echo
read person
case "$person" in
# Note variable is quoted.
"E" | "e" )
# Accept upper or lowercase input.
echo
echo "Roland Evans"
echo "4321 Flash Dr."
echo "Hardscrabble, CO 80753"
echo "(303) 734-9874"
echo "(303) 734-9892 fax"
echo "revans@zzy.net"
echo "Business partner & old friend"
;;
# Note double semicolon to terminate each option.
"J" | "j" )
echo
echo "Mildred Jones"
echo "249 E. 7th St., Apt. 19"
echo "New York, NY 10009"
echo "(212) 533-2814"
echo "(212) 533-9972 fax"
echo "milliej@loisaida.com"
echo "Ex-girlfriend"
echo "Birthday: Feb. 11"
;;
# Add info for Smith & Zane later.
* )
# Default option.
# Empty input (hitting RETURN) fits here, too.
echo
echo "Not yet in database."
Chapter 10. Loops and Branches 153](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-159-320.jpg)
![Advanced Bash-Scripting Guide
;;
esac
echo
# Exercise:
# --------
# Change the script so it accepts multiple inputs,
#+ instead of terminating after displaying just one address.
exit 0
An exceptionally clever use of case involves testing for command-line parameters.
#! /bin/bash
case "$1" in
"") echo "Usage: ${0##*/} <filename>"; exit $E_PARAM;;
# No command-line parameters,
# or first parameter empty.
# Note that ${0##*/} is ${var##pattern} param substitution.
# Net result is $0.
-*) FILENAME=./$1;; # If filename passed as argument ($1)
#+ starts with a dash,
#+ replace it with ./$1
#+ so further commands don't interpret it
#+ as an option.
* ) FILENAME=$1;; # Otherwise, $1.
esac
Here is an more straightforward example of command-line parameter handling:
#! /bin/bash
while [ $# -gt 0 ]; do # Until you run out of parameters . . .
case "$1" in
-d|--debug)
# "-d" or "--debug" parameter?
DEBUG=1
;;
-c|--conf)
CONFFILE="$2"
shift
if [ ! -f $CONFFILE ]; then
echo "Error: Supplied file doesn't exist!"
exit $E_CONFFILE # File not found error.
fi
;;
esac
shift # Check next set of parameters.
done
# From Stefano Falsetto's "Log2Rot" script,
#+ part of his "rottlog" package.
# Used with permission.
Example 10-26. Using command substitution to generate the case variable
Chapter 10. Loops and Branches 154](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-160-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
# case-cmd.sh: Using command substitution to generate a "case" variable.
case $( arch ) in # "arch" returns machine architecture.
# Equivalent to 'uname -m' ...
i386 ) echo "80386-based machine";;
i486 ) echo "80486-based machine";;
i586 ) echo "Pentium-based machine";;
i686 ) echo "Pentium2+-based machine";;
* ) echo "Other type of machine";;
esac
exit 0
A case construct can filter strings for globbing patterns.
Example 10-27. Simple string matching
#!/bin/bash
# match-string.sh: Simple string matching.
match_string ()
{ # Exact string match.
MATCH=0
E_NOMATCH=90
PARAMS=2 # Function requires 2 arguments.
E_BAD_PARAMS=91
[ $# -eq $PARAMS ] || return $E_BAD_PARAMS
case "$1" in
"$2") return $MATCH;;
* ) return $E_NOMATCH;;
esac
}
a=one
b=two
c=three
d=two
match_string $a # wrong number of parameters
echo $? # 91
match_string $a $b # no match
echo $? # 90
match_string $b $d # match
echo $? # 0
exit 0
Example 10-28. Checking for alphabetic input
Chapter 10. Loops and Branches 155](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-161-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
# isalpha.sh: Using a "case" structure to filter a string.
SUCCESS=0
FAILURE=-1
isalpha () # Tests whether *first character* of input string is alphabetic.
{
if [ -z "$1" ] # No argument passed?
then
return $FAILURE
fi
case "$1" in
[a-zA-Z]*) return $SUCCESS;; # Begins with a letter?
* ) return $FAILURE;;
esac
} # Compare this with "isalpha ()" function in C.
isalpha2 () # Tests whether *entire string* is alphabetic.
{
[ $# -eq 1 ] || return $FAILURE
case $1 in
*[!a-zA-Z]*|"") return $FAILURE;;
*) return $SUCCESS;;
esac
}
isdigit () # Tests whether *entire string* is numerical.
{ # In other words, tests for integer variable.
[ $# -eq 1 ] || return $FAILURE
case $1 in
*[!0-9]*|"") return $FAILURE;;
*) return $SUCCESS;;
esac
}
check_var () # Front-end to isalpha ().
{
if isalpha "$@"
then
echo ""$*" begins with an alpha character."
if isalpha2 "$@"
then # No point in testing if first char is non-alpha.
echo ""$*" contains only alpha characters."
else
echo ""$*" contains at least one non-alpha character."
fi
else
echo ""$*" begins with a non-alpha character."
# Also "non-alpha" if no argument passed.
fi
echo
}
Chapter 10. Loops and Branches 156](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-162-320.jpg)
![Advanced Bash-Scripting Guide
digit_check () # Front-end to isdigit ().
{
if isdigit "$@"
then
echo ""$*" contains only digits [0 - 9]."
else
echo ""$*" has at least one non-digit character."
fi
echo
}
a=23skidoo
b=H3llo
c=-What?
d=What?
e=`echo $b` # Command substitution.
f=AbcDef
g=27234
h=27a34
i=27.34
check_var $a
check_var $b
check_var $c
check_var $d
check_var $e
check_var $f
check_var # No argument passed, so what happens?
#
digit_check $g
digit_check $h
digit_check $i
exit 0 # Script improved by S.C.
# Exercise:
# --------
# Write an 'isfloat ()' function that tests for floating point numbers.
# Hint: The function duplicates 'isdigit ()',
#+ but adds a test for a mandatory decimal point.
select
The select construct, adopted from the Korn Shell, is yet another tool for building menus.
select variable [in list]
do
command...
break
done
This prompts the user to enter one of the choices presented in the variable list. Note that select uses
the $PS3 prompt (#? ) by default, but this may be changed.
Example 10-29. Creating menus using select
Chapter 10. Loops and Branches 157](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-163-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
PS3='Choose your favorite vegetable: ' # Sets the prompt string.
# Otherwise it defaults to #? .
echo
select vegetable in "beans" "carrots" "potatoes" "onions" "rutabagas"
do
echo
echo "Your favorite veggie is $vegetable."
echo "Yuck!"
echo
break # What happens if there is no 'break' here?
done
exit
# Exercise:
# --------
# Fix this script to accept user input not specified in
#+ the "select" statement.
# For example, if the user inputs "peas,"
#+ The script would respond "Sorry. That is not on the menu."
If in list is omitted, then select uses the list of command line arguments ($@) passed to the script
or to the function in which the select construct is embedded.
Compare this to the behavior of a
for variable [in list]
construct with the in list omitted.
Example 10-30. Creating menus using select in a function
#!/bin/bash
PS3='Choose your favorite vegetable: '
echo
choice_of()
{
select vegetable
# [in list] omitted, so 'select' uses arguments passed to function.
do
echo
echo "Your favorite veggie is $vegetable."
echo "Yuck!"
echo
break
done
}
choice_of beans rice carrots radishes tomatoes spinach
# $1 $2 $3 $4 $5 $6
# passed to choice_of() function
Chapter 10. Loops and Branches 158](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-164-320.jpg)
![Chapter 11. Command Substitution
Command substitution reassigns the output of a command [48] or even multiple commands; it literally plugs
the command output into another context. [49]
The classic form of command substitution uses backquotes (`...`). Commands within backquotes (backticks)
generate command-line text.
script_name=`basename $0`
echo "The name of this script is $script_name."
The output of commands can be used as arguments to another command, to set a variable, and even for
generating the argument list in a for loop.
rm `cat filename` # "filename" contains a list of files to delete.
#
# S. C. points out that "arg list too long" error might result.
# Better is xargs rm -- < filename
# ( -- covers those cases where "filename" begins with a "-" )
textfile_listing=`ls *.txt`
# Variable contains names of all *.txt files in current working directory.
echo $textfile_listing
textfile_listing2=$(ls *.txt) # The alternative form of command substitution.
echo $textfile_listing2
# Same result.
# A possible problem with putting a list of files into a single string
# is that a newline may creep in.
#
# A safer way to assign a list of files to a parameter is with an array.
# shopt -s nullglob # If no match, filename expands to nothing.
# textfile_listing=( *.txt )
#
# Thanks, S.C.
Command substitution invokes a subshell.
Command substitution may result in word splitting.
COMMAND `echo a b` # 2 args: a and b
COMMAND "`echo a b`" # 1 arg: "a b"
COMMAND `echo` # no arg
COMMAND "`echo`" # one empty arg
# Thanks, S.C.
Even when there is no word splitting, command substitution can remove trailing newlines.
# cd "`pwd`" # This should always work.
# However...
Chapter 11. Command Substitution 160](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-166-320.jpg)
![Advanced Bash-Scripting Guide
# It is not necessary to explicitly assign a variable.
echo "` <$0`" # Echoes the script itself to stdout.
# Excerpts from system file, /etc/rc.d/rc.sysinit
#+ (on a Red Hat Linux installation)
if [ -f /fsckoptions ]; then
fsckoptions=`cat /fsckoptions`
...
fi
#
#
if [ -e "/proc/ide/${disk[$device]}/media" ] ; then
hdmedia=`cat /proc/ide/${disk[$device]}/media`
...
fi
#
#
if [ ! -n "`uname -r | grep -- "-"`" ]; then
ktag="`cat /proc/version`"
...
fi
#
#
if [ $usb = "1" ]; then
sleep 5
mouseoutput=`cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=02"`
kbdoutput=`cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=01"`
...
fi
Do not set a variable to the contents of a long text file unless you have a very good reason for doing so.
Do not set a variable to the contents of a binary file, even as a joke.
Example 11-1. Stupid script tricks
#!/bin/bash
# stupid-script-tricks.sh: Don't try this at home, folks.
# From "Stupid Script Tricks," Volume I.
dangerous_variable=`cat /boot/vmlinuz` # The compressed Linux kernel itself.
echo "string-length of $dangerous_variable = ${#dangerous_variable}"
# string-length of $dangerous_variable = 794151
# (Does not give same count as 'wc -c /boot/vmlinuz'.)
# echo "$dangerous_variable"
# Don't try this! It would hang the script.
# The document author is aware of no useful applications for
#+ setting a variable to the contents of a binary file.
exit 0
Chapter 11. Command Substitution 162](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-168-320.jpg)
![Advanced Bash-Scripting Guide
Notice that a buffer overrun does not occur. This is one instance where an interpreted language, such as
Bash, provides more protection from programmer mistakes than a compiled language.
Command substitution permits setting a variable to the output of a loop. The key to this is grabbing the output
of an echo command within the loop.
Example 11-2. Generating a variable from a loop
#!/bin/bash
# csubloop.sh: Setting a variable to the output of a loop.
variable1=`for i in 1 2 3 4 5
do
echo -n "$i" # The 'echo' command is critical
done` #+ to command substitution here.
echo "variable1 = $variable1" # variable1 = 12345
i=0
variable2=`while [ "$i" -lt 10 ]
do
echo -n "$i" # Again, the necessary 'echo'.
let "i += 1" # Increment.
done`
echo "variable2 = $variable2" # variable2 = 0123456789
# Demonstrates that it's possible to embed a loop
#+ within a variable declaration.
exit 0
Command substitution makes it possible to extend the toolset available to Bash. It is simply a matter of
writing a program or script that outputs to stdout (like a well-behaved UNIX tool should) and assigning
that output to a variable.
#include <stdio.h>
/* "Hello, world." C program */
int main()
{
printf( "Hello, world." );
return (0);
}
bash$ gcc -o hello hello.c
#!/bin/bash
# hello.sh
greeting=`./hello`
echo $greeting
Chapter 11. Command Substitution 163](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-169-320.jpg)
![Advanced Bash-Scripting Guide
bash$ sh hello.sh
Hello, world.
The $(...) form has superseded backticks for command substitution.
output=$(sed -n /"$1"/p $file) # From "grp.sh" example.
# Setting a variable to the contents of a text file.
File_contents1=$(cat $file1)
File_contents2=$(<$file2) # Bash permits this also.
The $(...) form of command substitution treats a double backslash in a different way than `...`.
bash$ echo `echo `
bash$ echo $(echo )
The $(...) form of command substitution permits nesting. [50]
word_count=$( wc -w $(echo * | awk '{print $8}') )
Or, for something a bit more elaborate . . .
Example 11-3. Finding anagrams
#!/bin/bash
# agram2.sh
# Example of nested command substitution.
# Uses "anagram" utility
#+ that is part of the author's "yawl" word list package.
# http://ibiblio.org/pub/Linux/libs/yawl-0.3.2.tar.gz
# http://bash.neuralshortcircuit.com/yawl-0.3.2.tar.gz
E_NOARGS=66
E_BADARG=67
MINLEN=7
if [ -z "$1" ]
then
echo "Usage $0 LETTERSET"
exit $E_NOARGS # Script needs a command-line argument.
elif [ ${#1} -lt $MINLEN ]
then
echo "Argument must have at least $MINLEN letters."
exit $E_BADARG
fi
FILTER='.......' # Must have at least 7 letters.
# 1234567
Anagrams=( $(echo $(anagram $1 | grep $FILTER) ) )
# $( $( nested command sub. ) )
Chapter 11. Command Substitution 164](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-170-320.jpg)
![Advanced Bash-Scripting Guide
# ( array assignment )
echo
echo "${#Anagrams[*]} 7+ letter anagrams found"
echo
echo ${Anagrams[0]} # First anagram.
echo ${Anagrams[1]} # Second anagram.
# Etc.
# echo "${Anagrams[*]}" # To list all the anagrams in a single line . . .
# Look ahead to the "Arrays" chapter for enlightenment on
#+ what's going on here.
# See also the agram.sh script for an example of anagram finding.
exit $?
Examples of command substitution in shell scripts:
1. Example 10-7
2. Example 10-26
3. Example 9-31
4. Example 15-3
5. Example 15-22
6. Example 15-17
7. Example 15-54
8. Example 10-13
9. Example 10-10
10. Example 15-32
11. Example 19-8
12. Example A-16
13. Example 27-3
14. Example 15-47
15. Example 15-48
16. Example 15-49
Chapter 11. Command Substitution 165](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-171-320.jpg)
![Chapter 14. Internal Commands and Builtins
A builtin is a command contained within the Bash tool set, literally built in. This is either for performance
reasons -- builtins execute faster than external commands, which usually require forking off [51] a separate
process -- or because a particular builtin needs direct access to the shell internals.
When a command or the shell itself initiates (or spawns) a new subprocess to carry out a task, this is called
forking. This new process is the child, and the process that forked it off is the parent. While the child
process is doing its work, the parent process is still executing.
Note that while a parent process gets the process ID of the child process, and can thus pass arguments to it,
the reverse is not true. This can create problems that are subtle and hard to track down.
Example 14-1. A script that spawns multiple instances of itself
#!/bin/bash
# spawn.sh
PIDS=$(pidof sh $0) # Process IDs of the various instances of this script.
P_array=( $PIDS ) # Put them in an array (why?).
echo $PIDS # Show process IDs of parent and child processes.
let "instances = ${#P_array[*]} - 1" # Count elements, less 1.
# Why subtract 1?
echo "$instances instance(s) of this script running."
echo "[Hit Ctl-C to exit.]"; echo
sleep 1 # Wait.
sh $0 # Play it again, Sam.
exit 0 # Not necessary; script will never get to here.
# Why not?
# After exiting with a Ctl-C,
#+ do all the spawned instances of the script die?
# If so, why?
# Note:
# ----
# Be careful not to run this script too long.
# It will eventually eat up too many system resources.
# Is having a script spawn multiple instances of itself
#+ an advisable scripting technique.
# Why or why not?
Generally, a Bash builtin does not fork a subprocess when it executes within a script. An external system
command or filter in a script usually will fork a subprocess.
A builtin may be a synonym to a system command of the same name, but Bash reimplements it internally. For
example, the Bash echo command is not the same as /bin/echo, although their behavior is almost
identical.
Chapter 14. Internal Commands and Builtins 176](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-182-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
echo "This line uses the "echo" builtin."
/bin/echo "This line uses the /bin/echo system command."
A keyword is a reserved word, token or operator. Keywords have a special meaning to the shell, and indeed
are the building blocks of the shell's syntax. As examples, for, while, do, and ! are keywords. Similar to a
builtin, a keyword is hard-coded into Bash, but unlike a builtin, a keyword is not in itself a command, but a
subunit of a command construct. [52]
I/O
echo
prints (to stdout) an expression or variable (see Example 4-1).
echo Hello
echo $a
An echo requires the -e option to print escaped characters. See Example 5-2.
Normally, each echo command prints a terminal newline, but the -n option suppresses this.
An echo can be used to feed a sequence of commands down a pipe.
if echo "$VAR" | grep -q txt # if [[ $VAR = *txt* ]]
then
echo "$VAR contains the substring sequence "txt""
fi
An echo, in combination with command substitution can set a variable.
a=`echo "HELLO" | tr A-Z a-z`
See also Example 15-22, Example 15-3, Example 15-47, and Example 15-48.
Be aware that echo `command` deletes any linefeeds that the output of command generates.
The $IFS (internal field separator) variable normally contains n (linefeed) as one of its set of
whitespace characters. Bash therefore splits the output of command at linefeeds into arguments to
echo. Then echo outputs these arguments, separated by spaces.
bash$ ls -l /usr/share/apps/kjezz/sounds
-rw-r--r-- 1 root root 1407 Nov 7 2000 reflect.au
-rw-r--r-- 1 root root 362 Nov 7 2000 seconds.au
bash$ echo `ls -l /usr/share/apps/kjezz/sounds`
total 40 -rw-r--r-- 1 root root 716 Nov 7 2000 reflect.au -rw-r--r-- 1 root root ...
So, how can we embed a linefeed within an echoed character string?
# Embedding a linefeed?
echo "Why doesn't this string n split on two lines?"
# Doesn't split.
Chapter 14. Internal Commands and Builtins 177](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-183-320.jpg)
![Advanced Bash-Scripting Guide
# Data entry terminates with the first <ENTER>.
echo
exit 0
The read command has some interesting options that permit echoing a prompt and even reading
keystrokes without hitting ENTER.
# Read a keypress without hitting ENTER.
read -s -n1 -p "Hit a key " keypress
echo; echo "Keypress was ""$keypress""."
# -s option means do not echo input.
# -n N option means accept only N characters of input.
# -p option means echo the following prompt before reading input.
# Using these options is tricky, since they need to be in the correct order.
The -n option to read also allows detection of the arrow keys and certain of the other unusual keys.
Example 14-6. Detecting the arrow keys
#!/bin/bash
# arrow-detect.sh: Detects the arrow keys, and a few more.
# Thank you, Sandro Magi, for showing me how.
# --------------------------------------------
# Character codes generated by the keypresses.
arrowup='[A'
arrowdown='[B'
arrowrt='[C'
arrowleft='[D'
insert='[2'
delete='[3'
# --------------------------------------------
SUCCESS=0
OTHER=65
echo -n "Press a key... "
# May need to also press ENTER if a key not listed above pressed.
read -n3 key # Read 3 characters.
echo -n "$key" | grep "$arrowup" #Check if character code detected.
if [ "$?" -eq $SUCCESS ]
then
echo "Up-arrow key pressed."
exit $SUCCESS
fi
echo -n "$key" | grep "$arrowdown"
if [ "$?" -eq $SUCCESS ]
then
echo "Down-arrow key pressed."
exit $SUCCESS
fi
Chapter 14. Internal Commands and Builtins 182](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-188-320.jpg)
![Advanced Bash-Scripting Guide
echo -n "$key" | grep "$arrowrt"
if [ "$?" -eq $SUCCESS ]
then
echo "Right-arrow key pressed."
exit $SUCCESS
fi
echo -n "$key" | grep "$arrowleft"
if [ "$?" -eq $SUCCESS ]
then
echo "Left-arrow key pressed."
exit $SUCCESS
fi
echo -n "$key" | grep "$insert"
if [ "$?" -eq $SUCCESS ]
then
echo ""Insert" key pressed."
exit $SUCCESS
fi
echo -n "$key" | grep "$delete"
if [ "$?" -eq $SUCCESS ]
then
echo ""Delete" key pressed."
exit $SUCCESS
fi
echo " Some other key pressed."
exit $OTHER
# ========================================= #
# Mark Alexander came up with a simplified
#+ version of the above script (Thank you!).
# It eliminates the need for grep.
#!/bin/bash
uparrow=$'x1b[A'
downarrow=$'x1b[B'
leftarrow=$'x1b[D'
rightarrow=$'x1b[C'
read -s -n3 -p "Hit an arrow key: " x
case "$x" in
$uparrow)
echo "You pressed up-arrow"
;;
$downarrow)
echo "You pressed down-arrow"
;;
$leftarrow)
echo "You pressed left-arrow"
;;
$rightarrow)
echo "You pressed right-arrow"
;;
Chapter 14. Internal Commands and Builtins 183](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-189-320.jpg)
![Advanced Bash-Scripting Guide
(cd /source/directory && tar cf - . ) | (cd /dest/directory && tar xpvf -)
[from the previously cited example by Alan Cox]
The -P (physical) option to cd causes it to ignore symbolic links.
cd - changes to $OLDPWD, the previous working directory.
The cd command does not function as expected when presented with two forward
slashes.
bash$ cd //
bash$ pwd
//
The output should, of course, be /. This is a problem both from the command-line and
in a script.
pwd
Print Working Directory. This gives the user's (or script's) current directory (see Example 14-9). The
effect is identical to reading the value of the builtin variable $PWD.
pushd, popd, dirs
This command set is a mechanism for bookmarking working directories, a means of moving back and
forth through directories in an orderly manner. A pushdown stack is used to keep track of directory
names. Options allow various manipulations of the directory stack.
pushd dir-name pushes the path dir-name onto the directory stack and simultaneously
changes the current working directory to dir-name
popd removes (pops) the top directory path name off the directory stack and simultaneously changes
the current working directory to that directory popped from the stack.
dirs lists the contents of the directory stack (compare this with the $DIRSTACK variable). A
successful pushd or popd will automatically invoke dirs.
Scripts that require various changes to the current working directory without hard-coding the
directory name changes can make good use of these commands. Note that the implicit $DIRSTACK
array variable, accessible from within a script, holds the contents of the directory stack.
Example 14-9. Changing the current working directory
#!/bin/bash
dir1=/usr/local
dir2=/var/spool
pushd $dir1
# Will do an automatic 'dirs' (list directory stack to stdout).
echo "Now in directory `pwd`." # Uses back-quoted 'pwd'.
# Now, do some stuff in directory 'dir1'.
pushd $dir2
echo "Now in directory `pwd`."
Chapter 14. Internal Commands and Builtins 187](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-193-320.jpg)
![Advanced Bash-Scripting Guide
# Now, do some stuff in directory 'dir2'.
echo "The top entry in the DIRSTACK array is $DIRSTACK."
popd
echo "Now back in directory `pwd`."
# Now, do some more stuff in directory 'dir1'.
popd
echo "Now back in original working directory `pwd`."
exit 0
# What happens if you don't 'popd' -- then exit the script?
# Which directory do you end up in? Why?
Variables
let
The let command carries out arithmetic operations on variables. [53] In many cases, it functions as a
less complex version of expr.
Example 14-10. Letting let do arithmetic.
#!/bin/bash
echo
let a=11 # Same as 'a=11'
let a=a+5 # Equivalent to let "a = a + 5"
# (Double quotes and spaces make it more readable.)
echo "11 + 5 = $a" # 16
let "a <<= 3" # Equivalent to let "a = a << 3"
echo ""$a" (=16) left-shifted 3 places = $a"
# 128
let "a /= 4" # Equivalent to let "a = a / 4"
echo "128 / 4 = $a" # 32
let "a -= 5" # Equivalent to let "a = a - 5"
echo "32 - 5 = $a" # 27
let "a *= 10" # Equivalent to let "a = a * 10"
echo "27 * 10 = $a" # 270
let "a %= 8" # Equivalent to let "a = a % 8"
echo "270 modulo 8 = $a (270 / 8 = 33, remainder $a)"
# 6
# Does "let" permit C-style operators?
# Yes, just as the (( ... )) double-parentheses construct does.
let a++ # C-style (post) increment.
echo "6++ = $a" # 6++ = 7
let a-- # C-style decrement.
echo "7-- = $a" # 7-- = 6
# Of course, ++a, etc., also allowed . . .
echo
Chapter 14. Internal Commands and Builtins 188](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-194-320.jpg)
![Advanced Bash-Scripting Guide
# Trinary operator.
# Note that $a is 6, see above.
let "t = a<7?7:11" # True
echo $t # 7
let a++
let "t = a<7?7:11" # False
echo $t # 11
exit
eval
eval arg1 [arg2] ... [argN]
Combines the arguments in an expression or list of expressions and evaluates them. Any variables
within the expression are expanded. The net result is to convert a string into a command.
The eval command can be used for code generation from the command-line or within
a script.
bash$ command_string="ps ax"
bash$ process="ps ax"
bash$ eval "$command_string" | grep "$process"
26973 pts/3 R+ 0:00 grep --color ps ax
26974 pts/3 R+ 0:00 ps ax
Each invocation of eval forces a re-evaluation of its arguments.
a='$b'
b='$c'
c=d
echo $a # $b
# First level.
eval echo $a # $c
# Second level.
eval eval echo $a # d
# Third level.
# Thank you, E. Choroba.
Example 14-11. Showing the effect of eval
#!/bin/bash
# Exercising "eval" ...
y=`eval ls -l` # Similar to y=`ls -l`
echo $y #+ but linefeeds removed because "echoed" variable is unquoted.
echo
echo "$y" # Linefeeds preserved when variable is quoted.
echo; echo
Chapter 14. Internal Commands and Builtins 189](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-195-320.jpg)
![Advanced Bash-Scripting Guide
y=`eval df` # Similar to y=`df`
echo $y #+ but linefeeds removed.
# When LF's not preserved, it may make it easier to parse output,
#+ using utilities such as "awk".
echo
echo "==========================================================="
echo
eval "`seq 3 | sed -e 's/.*/echo var&=ABCDEFGHIJ/'`"
# var1=ABCDEFGHIJ
# var2=ABCDEFGHIJ
# var3=ABCDEFGHIJ
echo
echo "==========================================================="
echo
# Now, showing how to do something useful with "eval" . . .
# (Thank you, E. Choroba!)
version=3.4 # Can we split the version into major and minor
#+ part in one command?
echo "version = $version"
eval major=${version/./;minor=} # Replaces '.' in version by ';minor='
# The substitution yields '3; minor=4'
#+ so eval does minor=4, major=3
echo Major: $major, minor: $minor # Major: 3, minor: 4
Example 14-12. Using eval to select among variables
#!/bin/bash
# arr-choice.sh
# Passing arguments to a function to select
#+ one particular variable out of a group.
arr0=( 10 11 12 13 14 15 )
arr1=( 20 21 22 23 24 25 )
arr2=( 30 31 32 33 34 35 )
# 0 1 2 3 4 5 Element number (zero-indexed)
choose_array ()
{
eval array_member=${arr${array_number}[element_number]}
# ^ ^^^^^^^^^^^^
# Using eval to construct the name of a variable,
#+ in this particular case, an array name.
echo "Element $element_number of array $array_number is $array_member"
} # Function can be rewritten to take parameters.
array_number=0 # First array.
element_number=3
choose_array # 13
array_number=2 # Third array.
Chapter 14. Internal Commands and Builtins 190](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-196-320.jpg)
![Advanced Bash-Scripting Guide
element_number=4
choose_array # 34
array_number=3 # Null array (arr3 not allocated).
element_number=4
choose_array # (null)
# Thank you, Antonio Macchi, for pointing this out.
Example 14-13. Echoing the command-line parameters
#!/bin/bash
# echo-params.sh
# Call this script with a few command-line parameters.
# For example:
# sh echo-params.sh first second third fourth fifth
params=$# # Number of command-line parameters.
param=1 # Start at first command-line param.
while [ "$param" -le "$params" ]
do
echo -n "Command-line parameter "
echo -n $$param # Gives only the *name* of variable.
# ^^^ # $1, $2, $3, etc.
# Why?
# $ escapes the first "$"
#+ so it echoes literally,
#+ and $param dereferences "$param" . . .
#+ . . . as expected.
echo -n " = "
eval echo $$param # Gives the *value* of variable.
# ^^^^ ^^^ # The "eval" forces the *evaluation*
#+ of $$
#+ as an indirect variable reference.
(( param ++ )) # On to the next.
done
exit $?
# =================================================
$ sh echo-params.sh first second third fourth fifth
Command-line parameter $1 = first
Command-line parameter $2 = second
Command-line parameter $3 = third
Command-line parameter $4 = fourth
Command-line parameter $5 = fifth
Example 14-14. Forcing a log-off
#!/bin/bash
# Killing ppp to force a log-off.
# For dialup connection, of course.
# Script should be run as root user.
SERPORT=ttyS3
Chapter 14. Internal Commands and Builtins 191](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-197-320.jpg)
![Advanced Bash-Scripting Guide
# Depending on the hardware and even the kernel version,
#+ the modem port on your machine may be different --
#+ /dev/ttyS1 or /dev/ttyS2.
killppp="eval kill -9 `ps ax | awk '/ppp/ { print $1 }'`"
# -------- process ID of ppp -------
$killppp # This variable is now a command.
# The following operations must be done as root user.
chmod 666 /dev/$SERPORT # Restore r+w permissions, or else what?
# Since doing a SIGKILL on ppp changed the permissions on the serial port,
#+ we restore permissions to previous state.
rm /var/lock/LCK..$SERPORT # Remove the serial port lock file. Why?
exit $?
# Exercises:
# ---------
# 1) Have script check whether root user is invoking it.
# 2) Do a check on whether the process to be killed
#+ is actually running before attempting to kill it.
# 3) Write an alternate version of this script based on 'fuser':
#+ if [ fuser -s /dev/modem ]; then . . .
Example 14-15. A version of rot13
#!/bin/bash
# A version of "rot13" using 'eval'.
# Compare to "rot13.sh" example.
setvar_rot_13() # "rot13" scrambling
{
local varname=$1 varvalue=$2
eval $varname='$(echo "$varvalue" | tr a-z n-za-m)'
}
setvar_rot_13 var "foobar" # Run "foobar" through rot13.
echo $var # sbbone
setvar_rot_13 var "$var" # Run "sbbone" through rot13.
# Back to original variable.
echo $var # foobar
# This example by Stephane Chazelas.
# Modified by document author.
exit 0
The eval command occurs in the older version of indirect referencing.
eval var=$$var
The eval command can be risky, and normally should be avoided when there exists a
reasonable alternative. An eval $COMMANDS executes the contents of COMMANDS,
Chapter 14. Internal Commands and Builtins 192](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-198-320.jpg)
![Advanced Bash-Scripting Guide
# ^ ^ Spaces not escaped
OIFS=$IFS; IFS=:;
# ^ Saving old IFS and setting new one.
echo
until [ $# -eq 0 ]
do # Step through positional parameters.
echo "### k0 = "$k"" # Before
k=$1:$k; # Append each pos param to loop variable.
# ^
echo "### k = "$k"" # After
echo
shift;
done
set $k # Set new positional parameters.
echo -
echo $# # Count of positional parameters.
echo -
echo
for i # Omitting the "in list" sets the variable -- i --
#+ to the positional parameters.
do
echo $i # Display new positional parameters.
done
IFS=$OIFS # Restore IFS.
# Question:
# Is it necessary to set an new IFS, internal field separator,
#+ in order for this script to work properly?
# What happens if you don't? Try it.
# And, why use the new IFS -- a colon -- in line 17,
#+ to append to the loop variable?
# What is the purpose of this?
exit 0
$ ./revposparams.sh
### k0 =
### k = a b
### k0 = a b
### k = c a b
### k0 = c a b
### k = d e c a b
-
3
-
d e
c
a b
Invoking set without any options or arguments simply lists all the environmental and other variables
that have been initialized.
Chapter 14. Internal Commands and Builtins 194](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-200-320.jpg)
![Advanced Bash-Scripting Guide
bash$ unset PATH
bash$ echo $PATH
bash$
Example 14-19. "Unsetting" a variable
#!/bin/bash
# unset.sh: Unsetting a variable.
variable=hello # Initialized.
echo "variable = $variable"
unset variable # Unset.
# In this particular context,
#+ same effect as: variable=
echo "(unset) variable = $variable" # $variable is null.
if [ -z "$variable" ] # Try a string-length test.
then
echo "$variable has zero length."
fi
exit 0
In most contexts, an undeclared variable and one that has been unset are equivalent.
However, the ${parameter:-default} parameter substitution construct can distinguish
between the two.
export
The export [54] command makes available variables to all child processes of the running script or
shell. One important use of the export command is in startup files, to initialize and make accessible
environmental variables to subsequent user processes.
Unfortunately, there is no way to export variables back to the parent process, to the
process that called or invoked the script or shell.
Example 14-20. Using export to pass a variable to an embedded awk script
#!/bin/bash
# Yet another version of the "column totaler" script (col-totaler.sh)
#+ that adds up a specified column (of numbers) in the target file.
# This uses the environment to pass a script variable to 'awk' . . .
#+ and places the awk script in a variable.
ARGS=2
E_WRONGARGS=85
if [ $# -ne "$ARGS" ] # Check for proper number of command-line args.
then
echo "Usage: `basename $0` filename column-number"
exit $E_WRONGARGS
fi
Chapter 14. Internal Commands and Builtins 196](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-202-320.jpg)
![Advanced Bash-Scripting Guide
filename=$1
column_number=$2
#===== Same as original script, up to this point =====#
export column_number
# Export column number to environment, so it's available for retrieval.
# -----------------------------------------------
awkscript='{ total += $ENVIRON["column_number"] }
END { print total }'
# Yes, a variable can hold an awk script.
# -----------------------------------------------
# Now, run the awk script.
awk "$awkscript" "$filename"
# Thanks, Stephane Chazelas.
exit 0
It is possible to initialize and export variables in the same operation, as in export
var1=xxx.
However, as Greg Keraunen points out, in certain situations this may have a different
effect than setting a variable, then exporting it.
bash$ export var=(a b); echo ${var[0]}
(a b)
bash$ var=(a b); export var; echo ${var[0]}
a
declare, typeset
The declare and typeset commands specify and/or restrict properties of variables.
readonly
Same as declare -r, sets a variable as read-only, or, in effect, as a constant. Attempts to change the
variable fail with an error message. This is the shell analog of the C language const type qualifier.
getopts
This powerful tool parses command-line arguments passed to the script. This is the Bash analog of the
getopt external command and the getopt library function familiar to C programmers. It permits
passing and concatenating multiple options [55] and associated arguments to a script (for example
scriptname -abc -e /usr/local).
The getopts construct uses two implicit variables. $OPTIND is the argument pointer (OPTion INDex)
and $OPTARG (OPTion ARGument) the (optional) argument attached to an option. A colon following
the option name in the declaration tags that option as having an associated argument.
A getopts construct usually comes packaged in a while loop, which processes the options and
arguments one at a time, then increments the implicit $OPTIND variable to point to the next.
Chapter 14. Internal Commands and Builtins 197](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-203-320.jpg)
![Advanced Bash-Scripting Guide
1. The arguments passed from the command-line to the script must be preceded
by a dash (-). It is the prefixed - that lets getopts recognize command-line
arguments as options. In fact, getopts will not process arguments without the
prefixed -, and will terminate option processing at the first argument
encountered lacking them.
2. The getopts template differs slightly from the standard while loop, in that it
lacks condition brackets.
3. The getopts construct is a highly functional replacement for the traditional
getopt external command.
while getopts ":abcde:fg" Option
# Initial declaration.
# a, b, c, d, e, f, and g are the options (flags) expected.
# The : after option 'e' shows it will have an argument passed with it.
do
case $Option in
a ) # Do something with variable 'a'.
b ) # Do something with variable 'b'.
...
e) # Do something with 'e', and also with $OPTARG,
# which is the associated argument passed with option 'e'.
...
g ) # Do something with variable 'g'.
esac
done
shift $(($OPTIND - 1))
# Move argument pointer to next.
# All this is not nearly as complicated as it looks <grin>.
Example 14-21. Using getopts to read the options/arguments passed to a script
#!/bin/bash
# ex33.sh: Exercising getopts and OPTIND
# Script modified 10/09/03 at the suggestion of Bill Gradwohl.
# Here we observe how 'getopts' processes command-line arguments to script.
# The arguments are parsed as "options" (flags) and associated arguments.
# Try invoking this script with:
# 'scriptname -mn'
# 'scriptname -oq qOption' (qOption can be some arbitrary string.)
# 'scriptname -qXXX -r'
#
# 'scriptname -qr'
#+ - Unexpected result, takes "r" as the argument to option "q"
# 'scriptname -q -r'
#+ - Unexpected result, same as above
# 'scriptname -mnop -mnop' - Unexpected result
# (OPTIND is unreliable at stating where an option came from.)
#
# If an option expects an argument ("flag:"), then it will grab
#+ whatever is next on the command-line.
NO_ARGS=0
E_OPTERROR=85
if [ $# -eq "$NO_ARGS" ] # Script invoked with no command-line args?
Chapter 14. Internal Commands and Builtins 198](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-204-320.jpg)
![Advanced Bash-Scripting Guide
then
echo "Usage: `basename $0` options (-mnopqrs)"
exit $E_OPTERROR # Exit and explain usage.
# Usage: scriptname -options
# Note: dash (-) necessary
fi
while getopts ":mnopq:rs" Option
do
case $Option in
m ) echo "Scenario #1: option -m- [OPTIND=${OPTIND}]";;
n | o ) echo "Scenario #2: option -$Option- [OPTIND=${OPTIND}]";;
p ) echo "Scenario #3: option -p- [OPTIND=${OPTIND}]";;
q ) echo "Scenario #4: option -q-
with argument "$OPTARG" [OPTIND=${OPTIND}]";;
# Note that option 'q' must have an associated argument,
#+ otherwise it falls through to the default.
r | s ) echo "Scenario #5: option -$Option-";;
* ) echo "Unimplemented option chosen.";; # Default.
esac
done
shift $(($OPTIND - 1))
# Decrements the argument pointer so it points to next argument.
# $1 now references the first non-option item supplied on the command-line
#+ if one exists.
exit $?
# As Bill Gradwohl states,
# "The getopts mechanism allows one to specify: scriptname -mnop -mnop
#+ but there is no reliable way to differentiate what came
#+ from where by using OPTIND."
# There are, however, workarounds.
Script Behavior
source, . (dot command)
This command, when invoked from the command-line, executes a script. Within a script, a source
file-name loads the file file-name. Sourcing a file (dot-command) imports code into the script,
appending to the script (same effect as the #include directive in a C program). The net result is the
same as if the "sourced" lines of code were physically present in the body of the script. This is useful
in situations when multiple scripts use a common data file or function library.
Example 14-22. "Including" a data file
#!/bin/bash
. data-file # Load a data file.
# Same effect as "source data-file", but more portable.
# The file "data-file" must be present in current working directory,
#+ since it is referred to by its 'basename'.
# Now, reference some data from that file.
echo "variable1 (from data-file) = $variable1"
Chapter 14. Internal Commands and Builtins 199](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-205-320.jpg)
![Advanced Bash-Scripting Guide
echo "variable3 (from data-file) = $variable3"
let "sum = $variable2 + $variable4"
echo "Sum of variable2 + variable4 (from data-file) = $sum"
echo "message1 (from data-file) is "$message1""
# Note: escaped quotes
print_message This is the message-print function in the data-file.
exit 0
File data-file for Example 14-22, above. Must be present in same directory.
# This is a data file loaded by a script.
# Files of this type may contain variables, functions, etc.
# It may be loaded with a 'source' or '.' command by a shell script.
# Let's initialize some variables.
variable1=22
variable2=474
variable3=5
variable4=97
message1="Hello, how are you?"
message2="Enough for now. Goodbye."
print_message ()
{
# Echoes any message passed to it.
if [ -z "$1" ]
then
return 1
# Error, if argument missing.
fi
echo
until [ -z "$1" ]
do
# Step through arguments passed to function.
echo -n "$1"
# Echo args one at a time, suppressing line feeds.
echo -n " "
# Insert spaces between words.
shift
# Next one.
done
echo
return 0
}
If the sourced file is itself an executable script, then it will run, then return control to the script that
called it. A sourced executable script may use a return for this purpose.
Arguments may be (optionally) passed to the sourced file as positional parameters.
Chapter 14. Internal Commands and Builtins 200](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-206-320.jpg)
![Advanced Bash-Scripting Guide
source $filename $arg1 arg2
It is even possible for a script to source itself, though this does not seem to have any practical
applications.
Example 14-23. A (useless) script that sources itself
#!/bin/bash
# self-source.sh: a script sourcing itself "recursively."
# From "Stupid Script Tricks," Volume II.
MAXPASSCNT=100 # Maximum number of execution passes.
echo -n "$pass_count "
# At first execution pass, this just echoes two blank spaces,
#+ since $pass_count still uninitialized.
let "pass_count += 1"
# Assumes the uninitialized variable $pass_count
#+ can be incremented the first time around.
# This works with Bash and pdksh, but
#+ it relies on non-portable (and possibly dangerous) behavior.
# Better would be to initialize $pass_count to 0 before incrementing.
while [ "$pass_count" -le $MAXPASSCNT ]
do
. $0 # Script "sources" itself, rather than calling itself.
# ./$0 (which would be true recursion) doesn't work here. Why?
done
# What occurs here is not actually recursion,
#+ since the script effectively "expands" itself, i.e.,
#+ generates a new section of code
#+ with each pass through the 'while' loop',
# with each 'source' in line 20.
#
# Of course, the script interprets each newly 'sourced' "#!" line
#+ as a comment, and not as the start of a new script.
echo
exit 0 # The net effect is counting from 1 to 100.
# Very impressive.
# Exercise:
# --------
# Write a script that uses this trick to actually do something useful.
exit
Unconditionally terminates a script. [56] The exit command may optionally take an integer argument,
which is returned to the shell as the exit status of the script. It is good practice to end all but the
simplest scripts with an exit 0, indicating a successful run.
If a script terminates with an exit lacking an argument, the exit status of the script is
the exit status of the last command executed in the script, not counting the exit. This is
equivalent to an exit $?.
An exit command may also be used to terminate a subshell.
Chapter 14. Internal Commands and Builtins 201](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-207-320.jpg)
![Advanced Bash-Scripting Guide
exec
This shell builtin replaces the current process with a specified command. Normally, when the shell
encounters a command, it forks off a child process to actually execute the command. Using the exec
builtin, the shell does not fork, and the command exec'ed replaces the shell. When used in a script,
therefore, it forces an exit from the script when the exec'ed command terminates. [57]
Example 14-24. Effects of exec
#!/bin/bash
exec echo "Exiting "$0"." # Exit from script here.
# ----------------------------------
# The following lines never execute.
echo "This echo will never echo."
exit 99 # This script will not exit here.
# Check exit value after script terminates
#+ with an 'echo $?'.
# It will *not* be 99.
Example 14-25. A script that exec's itself
#!/bin/bash
# self-exec.sh
# Note: Set permissions on this script to 555 or 755,
# then call it with ./self-exec.sh or sh ./self-exec.sh.
echo
echo "This line appears ONCE in the script, yet it keeps echoing."
echo "The PID of this instance of the script is still $$."
# Demonstrates that a subshell is not forked off.
echo "==================== Hit Ctl-C to exit ===================="
sleep 1
exec $0 # Spawns another instance of this same script
#+ that replaces the previous one.
echo "This line will never echo!" # Why not?
exit 99 # Will not exit here!
# Exit code will not be 99!
An exec also serves to reassign file descriptors. For example, exec <zzz-file replaces stdin
with the file zzz-file.
The -exec option to find is not the same as the exec shell builtin.
shopt
This command permits changing shell options on the fly (see Example 24-1 and Example 24-2). It
often appears in the Bash startup files, but also has its uses in scripts. Needs version 2 or later of Bash.
Chapter 14. Internal Commands and Builtins 202](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-208-320.jpg)
![Advanced Bash-Scripting Guide
# Testing "false"
if false
then
echo "false evaluates "true""
else
echo "false evaluates "false""
fi
# false evaluates "false"
# Looping while "false" (null loop)
while false
do
# The following code will not execute.
operation-1
operation-2
...
operation-n
# Nothing happens!
done
type [cmd]
Similar to the which external command, type cmd identifies "cmd." Unlike which, type is a Bash
builtin. The useful -a option to type identifies keywords and builtins, and also locates system
commands with identical names.
bash$ type '['
[ is a shell builtin
bash$ type -a '['
[ is a shell builtin
[ is /usr/bin/[
bash$ type type
type is a shell builtin
The type command can be useful for testing whether a certain command exists.
hash [cmds]
Records the path name of specified commands -- in the shell hash table [58] -- so the shell or script
will not need to search the $PATH on subsequent calls to those commands. When hash is called with
no arguments, it simply lists the commands that have been hashed. The -r option resets the hash
table.
bind
The bind builtin displays or modifies readline [59] key bindings.
help
Gets a short usage summary of a shell builtin. This is the counterpart to whatis, but for builtins. The
display of help information got a much-needed update in the version 4 release of Bash.
bash$ help exit
exit: exit [n]
Exit the shell with a status of N. If N is omitted, the exit status
is that of the last command executed.
Chapter 14. Internal Commands and Builtins 204](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-210-320.jpg)
![Advanced Bash-Scripting Guide
14.1. Job Control Commands
Certain of the following job control commands take a job identifier as an argument. See the table at end of the
chapter.
jobs
Lists the jobs running in the background, giving the job number. Not as useful as ps.
It is all too easy to confuse jobs and processes. Certain builtins, such as kill, disown,
and wait accept either a job number or a process number as an argument. The fg, bg
and jobs commands accept only a job number.
bash$ sleep 100 &
[1] 1384
bash $ jobs
[1]+ Running sleep 100 &
"1" is the job number (jobs are maintained by the current shell). "1384" is the PID or
process ID number (processes are maintained by the system). To kill this job/process,
either a kill %1 or a kill 1384 works.
Thanks, S.C.
disown
Remove job(s) from the shell's table of active jobs.
fg, bg
The fg command switches a job running in the background into the foreground. The bg command
restarts a suspended job, and runs it in the background. If no job number is specified, then the fg or bg
command acts upon the currently running job.
wait
Suspend script execution until all jobs running in background have terminated, or until the job number
or process ID specified as an option terminates. Returns the exit status of waited-for command.
You may use the wait command to prevent a script from exiting before a background job finishes
executing (this would create a dreaded orphan process).
Example 14-26. Waiting for a process to finish before proceeding
#!/bin/bash
ROOT_UID=0 # Only users with $UID 0 have root privileges.
E_NOTROOT=65
E_NOPARAMS=66
if [ "$UID" -ne "$ROOT_UID" ]
then
echo "Must be root to run this script."
# "Run along kid, it's past your bedtime."
exit $E_NOTROOT
fi
if [ -z "$1" ]
then
Chapter 14. Internal Commands and Builtins 205](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-211-320.jpg)
![Advanced Bash-Scripting Guide
echo "Usage: `basename $0` find-string"
exit $E_NOPARAMS
fi
echo "Updating 'locate' database..."
echo "This may take a while."
updatedb /usr & # Must be run as root.
wait
# Don't run the rest of the script until 'updatedb' finished.
# You want the the database updated before looking up the file name.
locate $1
# Without the 'wait' command, in the worse case scenario,
#+ the script would exit while 'updatedb' was still running,
#+ leaving it as an orphan process.
exit 0
Optionally, wait can take a job identifier as an argument, for example, wait%1 or wait $PPID.
See the job id table.
Within a script, running a command in the background with an ampersand (&) may cause the script to han
ENTER is hit. This seems to occur with commands that write to stdout. It can be a major annoyance.
#!/bin/bash
# test.sh
ls -l &
echo "Done."
bash$ ./test.sh
Done.
[bozo@localhost test-scripts]$ total 1
-rwxr-xr-x 1 bozo bozo 34 Oct 11 15:09 test.sh
_
As Walter Brameld IV explains it:
As far as I can tell, such scripts don't actually hang. It ju
seems that they do because the background command writes text
the console after the prompt. The user gets the impression th
the prompt was never displayed. Here's the sequence of events
1. Script launches background command.
2. Script exits.
3. Shell displays the prompt.
4. Background command continues running and writing text to t
console.
5. Background command finishes.
6. User doesn't see a prompt at the bottom of the output, thi
is hanging.
Chapter 14. Internal Commands and Builtins 206](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-212-320.jpg)
![Advanced Bash-Scripting Guide
Placing a wait after the background command seems to remedy this.
#!/bin/bash
# test.sh
ls -l &
echo "Done."
wait
bash$ ./test.sh
Done.
[bozo@localhost test-scripts]$ total 1
-rwxr-xr-x 1 bozo bozo 34 Oct 11 15:09 test.sh
Redirecting the output of the command to a file or even to /dev/null also takes care of this problem.
suspend
This has a similar effect to Control-Z, but it suspends the shell (the shell's parent process should
resume it at an appropriate time).
logout
Exit a login shell, optionally specifying an exit status.
times
Gives statistics on the system time elapsed when executing commands, in the following form:
0m0.020s 0m0.020s
This capability is of relatively limited value, since it is not common to profile and benchmark shell
scripts.
kill
Forcibly terminate a process by sending it an appropriate terminate signal (see Example 16-6).
Example 14-27. A script that kills itself
#!/bin/bash
# self-destruct.sh
kill $$ # Script kills its own process here.
# Recall that "$$" is the script's PID.
echo "This line will not echo."
# Instead, the shell sends a "Terminated" message to stdout.
exit 0 # Normal exit? No!
# After this script terminates prematurely,
#+ what exit status does it return?
#
# sh self-destruct.sh
# echo $?
# 143
#
# 143 = 128 + 15
# TERM signal
kill -l lists all the signals (as does the file /usr/include/asm/signal.h).
A kill -9 is a sure kill, which will usually terminate a process that stubbornly
refuses to die with a plain kill. Sometimes, a kill -15 works. A zombie process,
Chapter 14. Internal Commands and Builtins 207](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-213-320.jpg)
![Advanced Bash-Scripting Guide
that is, a child process that has terminated, but that the parent process has not (yet)
killed, cannot be killed by a logged-on user -- you can't kill something that is already
dead -- but init will generally clean it up sooner or later.
killall
The killall command kills a running process by name, rather than by process ID. If there are multiple
instances of a particular command running, then doing a killall on that command will terminate them
all.
This refers to the killall command in /usr/bin, not the killall script in
/etc/rc.d/init.d.
command
The command directive disables aliases and functions for the command immediately following it.
bash$ command ls
This is one of three shell directives that effect script command processing. The others
are builtin and enable.
builtin
Invoking builtin BUILTIN_COMMAND runs the command BUILTIN_COMMAND as a shell
builtin, temporarily disabling both functions and external system commands with the same name.
enable
This either enables or disables a shell builtin command. As an example, enable -n kill disables
the shell builtin kill, so that when Bash subsequently encounters kill, it invokes the external command
/bin/kill.
The -a option to enable lists all the shell builtins, indicating whether or not they are enabled. The -f
filename option lets enable load a builtin as a shared library (DLL) module from a properly
compiled object file. [60].
autoload
This is a port to Bash of the ksh autoloader. With autoload in place, a function with an autoload
declaration will load from an external file at its first invocation. [61] This saves system resources.
Note that autoload is not a part of the core Bash installation. It needs to be loaded in with enable
-f (see above).
Table 14-1. Job identifiers
Notation Meaning
%N Job number [N]
%S Invocation (command-line) of job begins with string S
%?S Invocation (command-line) of job contains within it string S
%% "current" job (last job stopped in foreground or started in background)
%+ "current" job (last job stopped in foreground or started in background)
%- Last job
$! Last background process
Chapter 14. Internal Commands and Builtins 208](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-214-320.jpg)
![Chapter 15. External Filters, Programs and
Commands
Standard UNIX commands make shell scripts more versatile. The power of scripts comes from coupling
system commands and shell directives with simple programming constructs.
15.1. Basic Commands
The first commands a novice learns
ls
The basic file "list" command. It is all too easy to underestimate the power of this humble command.
For example, using the -R, recursive option, ls provides a tree-like listing of a directory structure.
Other useful options are -S, sort listing by file size, -t, sort by file modification time, -b, show
escape characters, and -i, show file inodes (see Example 15-4).
The ls command returns a non-zero exit status when attempting to list a non-existent
file.
bash$ ls abc
ls: abc: No such file or directory
bash$ echo $?
2
Example 15-1. Using ls to create a table of contents for burning a CDR disk
#!/bin/bash
# ex40.sh (burn-cd.sh)
# Script to automate burning a CDR.
SPEED=10 # May use higher speed if your hardware supports it.
IMAGEFILE=cdimage.iso
CONTENTSFILE=contents
# DEVICE=/dev/cdrom For older versions of cdrecord
DEVICE="1,0,0"
DEFAULTDIR=/opt # This is the directory containing the data to be burned.
# Make sure it exists.
# Exercise: Add a test for this.
# Uses Joerg Schilling's "cdrecord" package:
# http://www.fokus.fhg.de/usr/schilling/cdrecord.html
# If this script invoked as an ordinary user, may need to suid cdrecord
#+ chmod u+s /usr/bin/cdrecord, as root.
# Of course, this creates a security hole, though a relatively minor one.
if [ -z "$1" ]
then
IMAGE_DIRECTORY=$DEFAULTDIR
# Default directory, if not specified on command-line.
Chapter 15. External Filters, Programs and Commands 210](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-216-320.jpg)
![Advanced Bash-Scripting Guide
bash$ rm ./-badname
When used with the recursive flag -r, this command removes files all the way down
the directory tree from the current directory. A careless rm -rf * can wipe out a big
chunk of a directory structure.
rmdir
Remove directory. The directory must be empty of all files -- including "invisible" dotfiles [62] -- for
this command to succeed.
mkdir
Make directory, creates a new directory. For example, mkdir -p
project/programs/December creates the named directory. The -p option automatically
creates any necessary parent directories.
chmod
Changes the attributes of an existing file or directory (see Example 14-14).
chmod +x filename
# Makes "filename" executable for all users.
chmod u+s filename
# Sets "suid" bit on "filename" permissions.
# An ordinary user may execute "filename" with same privileges as the file's owner.
# (This does not apply to shell scripts.)
chmod 644 filename
# Makes "filename" readable/writable to owner, readable to others
# (octal mode).
chmod 444 filename
# Makes "filename" read-only for all.
# Modifying the file (for example, with a text editor)
#+ not allowed for a user who does not own the file (except for root),
#+ and even the file owner must force a file-save
#+ if she modifies the file.
# Same restrictions apply for deleting the file.
chmod 1777 directory-name
# Gives everyone read, write, and execute permission in directory,
#+ however also sets the "sticky bit".
# This means that only the owner of the directory,
#+ owner of the file, and, of course, root
#+ can delete any particular file in that directory.
chmod 111 directory-name
# Gives everyone execute-only permission in a directory.
# This means that you can execute and READ the files in that directory
#+ (execute permission necessarily includes read permission
#+ because you can't execute a file without being able to read it).
# But you can't list the files or search for them with the "find" command.
# These restrictions do not apply to root.
chmod 000 directory-name
# No permissions at all for that directory.
# Can't read, write, or execute files in it.
# Can't even list files in it or "cd" to it.
# But, you can rename (mv) the directory
#+ or delete it (rmdir) if it is empty.
# You can even symlink to files in the directory,
Chapter 15. External Filters, Programs and Commands 213](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-219-320.jpg)
![Advanced Bash-Scripting Guide
#+ but you can't read, write, or execute the symlinks.
# These restrictions do not apply to root.
chattr
Change file attributes. This is analogous to chmod above, but with different options and a different
invocation syntax, and it works only on ext2/ext3 filesystems.
One particularly interesting chattr option is i. A chattr +i filename marks the file as immutable.
The file cannot be modified, linked to, or deleted, not even by root. This file attribute can be set or
removed only by root. In a similar fashion, the a option marks the file as append only.
root# chattr +i file1.txt
root# rm file1.txt
rm: remove write-protected regular file `file1.txt'? y
rm: cannot remove `file1.txt': Operation not permitted
If a file has the s (secure) attribute set, then when it is deleted its block is overwritten with binary
zeroes. [63]
If a file has the u (undelete) attribute set, then when it is deleted, its contents can still be retrieved
(undeleted).
If a file has the c (compress) attribute set, then it will automatically be compressed on writes to disk,
and uncompressed on reads.
The file attributes set with chattr do not show in a file listing (ls -l).
ln
Creates links to pre-existings files. A "link" is a reference to a file, an alternate name for it. The ln
command permits referencing the linked file by more than one name and is a superior alternative to
aliasing (see Example 4-6).
The ln creates only a reference, a pointer to the file only a few bytes in size.
The ln command is most often used with the -s, symbolic or "soft" link flag. Advantages of using the
-s flag are that it permits linking across file systems or to directories.
The syntax of the command is a bit tricky. For example: ln -s oldfile newfile links the
previously existing oldfile to the newly created link, newfile.
If a file named newfile has previously existed, an error message will result.
Which type of link to use?
As John Macdonald explains it:
Both of these [types of links] provide a certain measure of dual reference -- if you edit the contents
of the file using any name, your changes will affect both the original name and either a hard or soft
Chapter 15. External Filters, Programs and Commands 214](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-220-320.jpg)
![Advanced Bash-Scripting Guide
new name. The differences between them occurs when you work at a higher level. The advantage of
a hard link is that the new name is totally independent of the old name -- if you remove or rename
the old name, that does not affect the hard link, which continues to point to the data while it would
leave a soft link hanging pointing to the old name which is no longer there. The advantage of a soft
link is that it can refer to a different file system (since it is just a reference to a file name, not to
actual data). And, unlike a hard link, a symbolic link can refer to a directory.
Links give the ability to invoke a script (or any other type of executable) with multiple names, and
having that script behave according to how it was invoked.
Example 15-2. Hello or Good-bye
#!/bin/bash
# hello.sh: Saying "hello" or "goodbye"
#+ depending on how script is invoked.
# Make a link in current working directory ($PWD) to this script:
# ln -s hello.sh goodbye
# Now, try invoking this script both ways:
# ./hello.sh
# ./goodbye
HELLO_CALL=65
GOODBYE_CALL=66
if [ $0 = "./goodbye" ]
then
echo "Good-bye!"
# Some other goodbye-type commands, as appropriate.
exit $GOODBYE_CALL
fi
echo "Hello!"
# Some other hello-type commands, as appropriate.
exit $HELLO_CALL
man, info
These commands access the manual and information pages on system commands and installed
utilities. When available, the info pages usually contain more detailed descriptions than do the man
pages.
There have been various attempts at "automating" the writing of man pages. For a script that makes a
tentative first step in that direction, see Example A-39.
15.2. Complex Commands
Commands for more advanced users
find
-exec COMMAND ;
Chapter 15. External Filters, Programs and Commands 215](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-221-320.jpg)
![Advanced Bash-Scripting Guide
Carries out COMMAND on each file that find matches. The command sequence terminates with ; (the
";" is escaped to make certain the shell passes it to find literally, without interpreting it as a special
character).
bash$ find ~/ -name '*.txt'
/home/bozo/.kde/share/apps/karm/karmdata.txt
/home/bozo/misc/irmeyc.txt
/home/bozo/test-scripts/1.txt
If COMMAND contains {}, then find substitutes the full path name of the selected file for "{}".
find ~/ -name 'core*' -exec rm {} ;
# Removes all core dump files from user's home directory.
find /home/bozo/projects -mtime -1
# ^ Note minus sign!
# Lists all files in /home/bozo/projects directory tree
#+ that were modified within the last day (current_day - 1).
#
find /home/bozo/projects -mtime 1
# Same as above, but modified *exactly* one day ago.
#
# mtime = last modification time of the target file
# ctime = last status change time (via 'chmod' or otherwise)
# atime = last access time
DIR=/home/bozo/junk_files
find "$DIR" -type f -atime +5 -exec rm {} ;
# ^ ^^
# Curly brackets are placeholder for the path name output by "find."
#
# Deletes all files in "/home/bozo/junk_files"
#+ that have not been accessed in *at least* 5 days (plus sign ... +5).
#
# "-type filetype", where
# f = regular file
# d = directory
# l = symbolic link, etc.
#
# (The 'find' manpage and info page have complete option listings.)
find /etc -exec grep '[0-9][0-9]*[.][0-9][0-9]*[.][0-9][0-9]*[.][0-9][0-9]*' {} ;
# Finds all IP addresses (xxx.xxx.xxx.xxx) in /etc directory files.
# There a few extraneous hits. Can they be filtered out?
# Possibly by:
find /etc -type f -exec cat '{}' ; | tr -c '.[:digit:]' 'n'
| grep '^[^.][^.]*.[^.][^.]*.[^.][^.]*.[^.][^.]*$'
#
# [:digit:] is one of the character classes
#+ introduced with the POSIX 1003.2 standard.
# Thanks, Stéphane Chazelas.
The -exec option to find should not be confused with the exec shell builtin.
Chapter 15. External Filters, Programs and Commands 216](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-222-320.jpg)
![Advanced Bash-Scripting Guide
Example 15-3. Badname, eliminate file names in current directory containing bad characters
and whitespace.
#!/bin/bash
# badname.sh
# Delete filenames in current directory containing bad characters.
for filename in *
do
badname=`echo "$filename" | sed -n /[+{;"=?~()<>&*|$]/p`
# badname=`echo "$filename" | sed -n '/[+{;"=?~()<>&*|$]/p'` also works.
# Deletes files containing these nasties: + { ; " = ? ~ ( ) < > & * | $
#
rm $badname 2>/dev/null
# ^^^^^^^^^^^ Error messages deep-sixed.
done
# Now, take care of files containing all manner of whitespace.
find . -name "* *" -exec rm -f {} ;
# The path name of the file that _find_ finds replaces the "{}".
# The '' ensures that the ';' is interpreted literally, as end of command.
exit 0
#---------------------------------------------------------------------
# Commands below this line will not execute because of _exit_ command.
# An alternative to the above script:
find . -name '*[+{;"=?~()<>&*|$ ]*' -maxdepth 0
-exec rm -f '{}' ;
# The "-maxdepth 0" option ensures that _find_ will not search
#+ subdirectories below $PWD.
# (Thanks, S.C.)
Example 15-4. Deleting a file by its inode number
#!/bin/bash
# idelete.sh: Deleting a file by its inode number.
# This is useful when a filename starts with an illegal character,
#+ such as ? or -.
ARGCOUNT=1 # Filename arg must be passed to script.
E_WRONGARGS=70
E_FILE_NOT_EXIST=71
E_CHANGED_MIND=72
if [ $# -ne "$ARGCOUNT" ]
then
echo "Usage: `basename $0` filename"
exit $E_WRONGARGS
fi
if [ ! -e "$1" ]
then
echo "File ""$1"" does not exist."
exit $E_FILE_NOT_EXIST
fi
Chapter 15. External Filters, Programs and Commands 217](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-223-320.jpg)
![Advanced Bash-Scripting Guide
inum=`ls -i | grep "$1" | awk '{print $1}'`
# inum = inode (index node) number of file
# -----------------------------------------------------------------------
# Every file has an inode, a record that holds its physical address info.
# -----------------------------------------------------------------------
echo; echo -n "Are you absolutely sure you want to delete "$1" (y/n)? "
# The '-v' option to 'rm' also asks this.
read answer
case "$answer" in
[nN]) echo "Changed your mind, huh?"
exit $E_CHANGED_MIND
;;
*) echo "Deleting file "$1".";;
esac
find . -inum $inum -exec rm {} ;
# ^^
# Curly brackets are placeholder
#+ for text output by "find."
echo "File ""$1"" deleted!"
exit 0
The find command also works without the -exec option.
#!/bin/bash
# Find suid root files.
# A strange suid file might indicate a security hole,
#+ or even a system intrusion.
directory="/usr/sbin"
# Might also try /sbin, /bin, /usr/bin, /usr/local/bin, etc.
permissions="+4000" # suid root (dangerous!)
for file in $( find "$directory" -perm "$permissions" )
do
ls -ltF --author "$file"
done
See Example 15-30, Example 3-4, and Example 10-9 for scripts using find. Its manpage provides
more detail on this complex and powerful command.
xargs
A filter for feeding arguments to a command, and also a tool for assembling the commands
themselves. It breaks a data stream into small enough chunks for filters and commands to process.
Consider it as a powerful replacement for backquotes. In situations where command substitution fails
with a too many arguments error, substituting xargs often works. [64] Normally, xargs reads from
stdin or from a pipe, but it can also be given the output of a file.
The default command for xargs is echo. This means that input piped to xargs may have linefeeds and
other whitespace characters stripped out.
bash$ ls -l
total 0
-rw-rw-r-- 1 bozo bozo 0 Jan 29 23:58 file1
-rw-rw-r-- 1 bozo bozo 0 Jan 29 23:58 file2
Chapter 15. External Filters, Programs and Commands 218](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-224-320.jpg)
![Advanced Bash-Scripting Guide
# Note: /var/log/messages must be world readable
# if this script invoked by an ordinary user.
# #root chmod 644 /var/log/messages
LINES=5
( date; uname -a ) >>logfile
# Time and machine name
echo ---------------------------------------------------------- >>logfile
tail -n $LINES /var/log/messages | xargs | fmt -s >>logfile
echo >>logfile
echo >>logfile
exit 0
# Note:
# ----
# As Frank Wang points out,
#+ unmatched quotes (either single or double quotes) in the source file
#+ may give xargs indigestion.
#
# He suggests the following substitution for line 15:
# tail -n $LINES /var/log/messages | tr -d ""'" | xargs | fmt -s >>logfile
# Exercise:
# --------
# Modify this script to track changes in /var/log/messages at intervals
#+ of 20 minutes.
# Hint: Use the "watch" command.
As in find, a curly bracket pair serves as a placeholder for replacement text.
Example 15-6. Copying files in current directory to another
#!/bin/bash
# copydir.sh
# Copy (verbose) all files in current directory ($PWD)
#+ to directory specified on command-line.
E_NOARGS=85
if [ -z "$1" ] # Exit if no argument given.
then
echo "Usage: `basename $0` directory-to-copy-to"
exit $E_NOARGS
fi
ls . | xargs -i -t cp ./{} $1
# ^^ ^^ ^^
# -t is "verbose" (output command-line to stderr) option.
# -i is "replace strings" option.
# {} is a placeholder for output text.
# This is similar to the use of a curly-bracket pair in "find."
#
# List the files in current directory (ls .),
#+ pass the output of "ls" as arguments to "xargs" (-i -t options),
Chapter 15. External Filters, Programs and Commands 220](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-226-320.jpg)
![Advanced Bash-Scripting Guide
# Check for input file on command-line.
ARGS=1
E_BADARGS=85
E_NOFILE=86
if [ $# -ne "$ARGS" ]
# Correct number of arguments passed to script?
then
echo "Usage: `basename $0` filename"
exit $E_BADARGS
fi
if [ ! -f "$1" ] # Check if file exists.
then
echo "File "$1" does not exist."
exit $E_NOFILE
fi
#####################################################
cat "$1" | xargs -n1 |
# List the file, one word per line.
tr A-Z a-z |
# Shift characters to lowercase.
sed -e 's/.//g' -e 's/,//g' -e 's/ /
/g' |
# Filter out periods and commas, and
#+ change space between words to linefeed,
sort | uniq -c | sort -nr
# Finally remove duplicates, prefix occurrence count
#+ and sort numerically.
#####################################################
# This does the same job as the "wf.sh" example,
#+ but a bit more ponderously, and it runs more slowly (why?).
exit $?
expr
All-purpose expression evaluator: Concatenates and evaluates the arguments according to the
operation given (arguments must be separated by spaces). Operations may be arithmetic, comparison,
string, or logical.
expr 3 + 5
returns 8
expr 5 % 3
returns 2
expr 1 / 0
returns the error message, expr: division by zero
Illegal arithmetic operations not allowed.
expr 5 * 3
returns 15
The multiplication operator must be escaped when used in an arithmetic expression with
expr.
y=`expr $y + 1`
Chapter 15. External Filters, Programs and Commands 222](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-228-320.jpg)
![Advanced Bash-Scripting Guide
echo
# Note escaping of operators.
b=`expr $a <= 3`
echo "If a <= 3, b = 1 (true)"
echo "b = $b" # 1 ( 3 -le 3 )
# There is also a ">=" operator (greater than or equal to).
echo
echo
# String Operators
# ------ ---------
echo "String Operators"
echo
a=1234zipper43231
echo "The string being operated upon is "$a"."
# length: length of string
b=`expr length $a`
echo "Length of "$a" is $b."
# index: position of first character in substring
# that matches a character in string
b=`expr index $a 23`
echo "Numerical position of first "2" in "$a" is "$b"."
# substr: extract substring, starting position & length specified
b=`expr substr $a 2 6`
echo "Substring of "$a", starting at position 2,
and 6 chars long is "$b"."
# The default behavior of the 'match' operations is to
#+ search for the specified match at the BEGINNING of the string.
#
# Using Regular Expressions ...
b=`expr match "$a" '[0-9]*'` # Numerical count.
echo Number of digits at the beginning of "$a" is $b.
b=`expr match "$a" '([0-9]*)'` # Note that escaped parentheses
# == == #+ trigger substring match.
echo "The digits at the beginning of "$a" are "$b"."
echo
exit 0
The : (null) operator can substitute for match. For example, b=`expr $a : [0-9]*` is
the exact equivalent of b=`expr match $a [0-9]*` in the above listing.
#!/bin/bash
echo
echo "String operations using "expr $string : " construct"
echo "==================================================="
echo
Chapter 15. External Filters, Programs and Commands 224](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-230-320.jpg)
![Advanced Bash-Scripting Guide
a=1234zipper5FLIPPER43231
echo "The string being operated upon is "`expr "$a" : '(.*)'`"."
# Escaped parentheses grouping operator. == ==
# ***************************
#+ Escaped parentheses
#+ match a substring
# ***************************
# If no escaped parentheses...
#+ then 'expr' converts the string operand to an integer.
echo "Length of "$a" is `expr "$a" : '.*'`." # Length of string
echo "Number of digits at the beginning of "$a" is `expr "$a" : '[0-9]*'`."
# ------------------------------------------------------------------------- #
echo
echo "The digits at the beginning of "$a" are `expr "$a" : '([0-9]*)'`."
# == ==
echo "The first 7 characters of "$a" are `expr "$a" : '(.......)'`."
# ===== == ==
# Again, escaped parentheses force a substring match.
#
echo "The last 7 characters of "$a" are `expr "$a" : '.*(.......)'`."
# ==== end of string operator ^^
# (actually means skip over one or more of any characters until specified
#+ substring)
echo
exit 0
The above script illustrates how expr uses the escaped parentheses -- ( ... ) -- grouping operator in tandem
with regular expression parsing to match a substring. Here is a another example, this time from "real life."
# Strip the whitespace from the beginning and end.
LRFDATE=`expr "$LRFDATE" : '[[:space:]]*(.*)[[:space:]]*$'`
# From Peter Knowles' "booklistgen.sh" script
#+ for converting files to Sony Librie/PRS-50X format.
# (http://booklistgensh.peterknowles.com)
Perl, sed, and awk have far superior string parsing facilities. A short sed or awk "subroutine" within a script
(see Section 33.3) is an attractive alternative to expr.
See Section 9.2 for more on using expr in string operations.
15.3. Time / Date Commands
Time/date and timing
date
Chapter 15. External Filters, Programs and Commands 225](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-231-320.jpg)
![Advanced Bash-Scripting Guide
Example 10-10, and Example A-8.
tsort
Topological sort, reading in pairs of whitespace-separated strings and sorting according to input
patterns. The original purpose of tsort was to sort a list of dependencies for an obsolete version of the
ld linker in an "ancient" version of UNIX.
The results of a tsort will usually differ markedly from those of the standard sort command, above.
uniq
This filter removes duplicate lines from a sorted file. It is often seen in a pipe coupled with sort.
cat list-1 list-2 list-3 | sort | uniq > final.list
# Concatenates the list files,
# sorts them,
# removes duplicate lines,
# and finally writes the result to an output file.
The useful -c option prefixes each line of the input file with its number of occurrences.
bash$ cat testfile
This line occurs only once.
This line occurs twice.
This line occurs twice.
This line occurs three times.
This line occurs three times.
This line occurs three times.
bash$ uniq -c testfile
1 This line occurs only once.
2 This line occurs twice.
3 This line occurs three times.
bash$ sort testfile | uniq -c | sort -nr
3 This line occurs three times.
2 This line occurs twice.
1 This line occurs only once.
The sort INPUTFILE | uniq -c | sort -nr command string produces a frequency of
occurrence listing on the INPUTFILE file (the -nr options to sort cause a reverse numerical sort).
This template finds use in analysis of log files and dictionary lists, and wherever the lexical structure
of a document needs to be examined.
Example 15-12. Word Frequency Analysis
#!/bin/bash
# wf.sh: Crude word frequency analysis on a text file.
# This is a more efficient version of the "wf2.sh" script.
# Check for input file on command-line.
ARGS=1
E_BADARGS=85
E_NOFILE=86
if [ $# -ne "$ARGS" ] # Correct number of arguments passed to script?
then
Chapter 15. External Filters, Programs and Commands 230](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-236-320.jpg)
![Advanced Bash-Scripting Guide
echo "Usage: `basename $0` filename"
exit $E_BADARGS
fi
if [ ! -f "$1" ] # Check if file exists.
then
echo "File "$1" does not exist."
exit $E_NOFILE
fi
########################################################
# main ()
sed -e 's/.//g' -e 's/,//g' -e 's/ /
/g' "$1" | tr 'A-Z' 'a-z' | sort | uniq -c | sort -nr
# =========================
# Frequency of occurrence
# Filter out periods and commas, and
#+ change space between words to linefeed,
#+ then shift characters to lowercase, and
#+ finally prefix occurrence count and sort numerically.
# Arun Giridhar suggests modifying the above to:
# . . . | sort | uniq -c | sort +1 [-f] | sort +0 -nr
# This adds a secondary sort key, so instances of
#+ equal occurrence are sorted alphabetically.
# As he explains it:
# "This is effectively a radix sort, first on the
#+ least significant column
#+ (word or string, optionally case-insensitive)
#+ and last on the most significant column (frequency)."
#
# As Frank Wang explains, the above is equivalent to
#+ . . . | sort | uniq -c | sort +0 -nr
#+ and the following also works:
#+ . . . | sort | uniq -c | sort -k1nr -k
########################################################
exit 0
# Exercises:
# ---------
# 1) Add 'sed' commands to filter out other punctuation,
#+ such as semicolons.
# 2) Modify the script to also filter out multiple spaces and
#+ other whitespace.
bash$ cat testfile
This line occurs only once.
This line occurs twice.
This line occurs twice.
This line occurs three times.
This line occurs three times.
This line occurs three times.
bash$ ./wf.sh testfile
6 this
6 occurs
6 line
Chapter 15. External Filters, Programs and Commands 231](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-237-320.jpg)
![Advanced Bash-Scripting Guide
3 times
3 three
2 twice
1 only
1 once
expand, unexpand
The expand filter converts tabs to spaces. It is often used in a pipe.
The unexpand filter converts spaces to tabs. This reverses the effect of expand.
cut
A tool for extracting fields from files. It is similar to the print $N command set in awk, but more
limited. It may be simpler to use cut in a script than awk. Particularly important are the -d (delimiter)
and -f (field specifier) options.
Using cut to obtain a listing of the mounted filesystems:
cut -d ' ' -f1,2 /etc/mtab
Using cut to list the OS and kernel version:
uname -a | cut -d" " -f1,3,11,12
Using cut to extract message headers from an e-mail folder:
bash$ grep '^Subject:' read-messages | cut -c10-80
Re: Linux suitable for mission-critical apps?
MAKE MILLIONS WORKING AT HOME!!!
Spam complaint
Re: Spam complaint
Using cut to parse a file:
# List all the users in /etc/passwd.
FILENAME=/etc/passwd
for user in $(cut -d: -f1 $FILENAME)
do
echo $user
done
# Thanks, Oleg Philon for suggesting this.
cut -d ' ' -f2,3 filename is equivalent to awk -F'[ ]' '{ print $2, $3 }'
filename
It is even possible to specify a linefeed as a delimiter. The trick is to actually embed a
linefeed (RETURN) in the command sequence.
bash$ cut -d'
' -f3,7,19 testfile
This is line 3 of testfile.
This is line 7 of testfile.
This is line 19 of testfile.
Thank you, Jaka Kranjc, for pointing this out.
See also Example 15-48.
Chapter 15. External Filters, Programs and Commands 232](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-238-320.jpg)
![Advanced Bash-Scripting Guide
paste
Tool for merging together different files into a single, multi-column file. In combination with cut,
useful for creating system log files.
join
Consider this a special-purpose cousin of paste. This powerful utility allows merging two files in a
meaningful fashion, which essentially creates a simple version of a relational database.
The join command operates on exactly two files, but pastes together only those lines with a common
tagged field (usually a numerical label), and writes the result to stdout. The files to be joined
should be sorted according to the tagged field for the matchups to work properly.
File: 1.data
100 Shoes
200 Laces
300 Socks
File: 2.data
100 $40.00
200 $1.00
300 $2.00
bash$ join 1.data 2.data
File: 1.data 2.data
100 Shoes $40.00
200 Laces $1.00
300 Socks $2.00
The tagged field appears only once in the output.
head
lists the beginning of a file to stdout. The default is 10 lines, but a different number can be
specified. The command has a number of interesting options.
Example 15-13. Which files are scripts?
#!/bin/bash
# script-detector.sh: Detects scripts within a directory.
TESTCHARS=2 # Test first 2 characters.
SHABANG='#!' # Scripts begin with a "sha-bang."
for file in * # Traverse all the files in current directory.
do
if [[ `head -c$TESTCHARS "$file"` = "$SHABANG" ]]
# head -c2 #!
# The '-c' option to "head" outputs a specified
#+ number of characters, rather than lines (the default).
then
echo "File "$file" is a script."
else
echo "File "$file" is *not* a script."
fi
done
Chapter 15. External Filters, Programs and Commands 233](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-239-320.jpg)
![Advanced Bash-Scripting Guide
To list a specific line of a text file, pipe the output of head to tail -n 1. For example
head -n 8 database.txt | tail -n 1 lists the 8th line of the file
database.txt.
To set a variable to a given block of a text file:
var=$(head -n $m $filename | tail -n $n)
# filename = name of file
# m = from beginning of file, number of lines to end of block
# n = number of lines to set variable to (trim from end of block)
Newer implementations of tail deprecate the older tail -$LINES filename usage. The
standard tail -n $LINES filename is correct.
See also Example 15-5, Example 15-39 and Example 29-6.
grep
A multi-purpose file search tool that uses Regular Expressions. It was originally a command/filter in
the venerable ed line editor: g/re/p -- global - regular expression - print.
grep pattern [file...]
Search the target file(s) for occurrences of pattern, where pattern may be literal text or a
Regular Expression.
bash$ grep '[rst]ystem.$' osinfo.txt
The GPL governs the distribution of the Linux operating system.
If no target file(s) specified, grep works as a filter on stdout, as in a pipe.
bash$ ps ax | grep clock
765 tty1 S 0:00 xclock
901 pts/1 S 0:00 grep clock
The -i option causes a case-insensitive search.
The -w option matches only whole words.
The -l option lists only the files in which matches were found, but not the matching lines.
The -r (recursive) option searches files in the current working directory and all subdirectories below
it.
The -n option lists the matching lines, together with line numbers.
bash$ grep -n Linux osinfo.txt
2:This is a file containing information about Linux.
6:The GPL governs the distribution of the Linux operating system.
The -v (or --invert-match) option filters out matches.
grep pattern1 *.txt | grep -v pattern2
# Matches all lines in "*.txt" files containing "pattern1",
Chapter 15. External Filters, Programs and Commands 236](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-242-320.jpg)
![Advanced Bash-Scripting Guide
osinfo.txt:This is a file containing information about Linux.
osinfo.txt:The GPL governs the distribution of the Linux operating system.
misc.txt:The Linux operating system is steadily gaining in popularity.
To force grep to show the filename when searching only one target file, simply give
/dev/null as the second file.
bash$ grep Linux osinfo.txt /dev/null
osinfo.txt:This is a file containing information about Linux.
osinfo.txt:The GPL governs the distribution of the Linux operating system.
If there is a successful match, grep returns an exit status of 0, which makes it useful in a condition test
in a script, especially in combination with the -q option to suppress output.
SUCCESS=0 # if grep lookup succeeds
word=Linux
filename=data.file
grep -q "$word" "$filename" # The "-q" option
#+ causes nothing to echo to stdout.
if [ $? -eq $SUCCESS ]
# if grep -q "$word" "$filename" can replace lines 5 - 7.
then
echo "$word found in $filename"
else
echo "$word not found in $filename"
fi
Example 29-6 demonstrates how to use grep to search for a word pattern in a system logfile.
Example 15-17. Emulating grep in a script
#!/bin/bash
# grp.sh: Rudimentary reimplementation of grep.
E_BADARGS=85
if [ -z "$1" ] # Check for argument to script.
then
echo "Usage: `basename $0` pattern"
exit $E_BADARGS
fi
echo
for file in * # Traverse all files in $PWD.
do
output=$(sed -n /"$1"/p $file) # Command substitution.
if [ ! -z "$output" ] # What happens if "$output" is not quoted?
then
echo -n "$file: "
echo "$output"
fi # sed -ne "/$1/s|^|${file}: |p" is equivalent to above.
echo
done
Chapter 15. External Filters, Programs and Commands 238](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-244-320.jpg)
![Advanced Bash-Scripting Guide
# If you happen to need an appropriate list,
#+ download the author's "yawl" word list package.
# http://ibiblio.org/pub/Linux/libs/yawl-0.3.2.tar.gz
# or
# http://bash.neuralshortcircuit.com/yawl-0.3.2.tar.gz
if [ -z "$1" ] # If no word pattern specified
then #+ as a command-line argument . . .
echo #+ . . . then . . .
echo "Usage:" #+ Usage message.
echo
echo ""$0" "pattern,""
echo "where "pattern" is in the form"
echo "xxx..x.x..."
echo
echo "The x's represent known letters,"
echo "and the periods are unknown letters (blanks)."
echo "Letters and periods can be in any position."
echo "For example, try: sh cw-solver.sh w...i....n"
echo
exit $E_NOPATT
fi
echo
# ===============================================
# This is where all the work gets done.
grep ^"$1"$ "$DICT" # Yes, only one line!
# | |
# ^ is start-of-word regex anchor.
# $ is end-of-word regex anchor.
# From _Stupid Grep Tricks_, vol. 1,
#+ a book the ABS Guide author may yet get around
#+ to writing . . . one of these days . . .
# ===============================================
echo
exit $? # Script terminates here.
# If there are too many words generated,
#+ redirect the output to a file.
$ sh cw-solver.sh w...i....n
wellington
workingman
workingmen
egrep -- extended grep -- is the same as grep -E. This uses a somewhat different, extended set of
Regular Expressions, which can make the search a bit more flexible. It also allows the boolean | (or)
operator.
bash $ egrep 'matches|Matches' file.txt
Line 1 matches.
Line 3 Matches.
Line 4 contains matches, but also Matches
fgrep -- fast grep -- is the same as grep -F. It does a literal string search (no Regular Expressions),
which generally speeds things up a bit.
Chapter 15. External Filters, Programs and Commands 240](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-246-320.jpg)
![Advanced Bash-Scripting Guide
On some Linux distros, egrep and fgrep are symbolic links to, or aliases for
grep, but invoked with the -E and -F options, respectively.
Example 15-19. Looking up definitions in Webster's 1913 Dictionary
#!/bin/bash
# dict-lookup.sh
# This script looks up definitions in the 1913 Webster's Dictionary.
# This Public Domain dictionary is available for download
#+ from various sites, including
#+ Project Gutenberg (http://www.gutenberg.org/etext/247).
#
# Convert it from DOS to UNIX format (with only LF at end of line)
#+ before using it with this script.
# Store the file in plain, uncompressed ASCII text.
# Set DEFAULT_DICTFILE variable below to path/filename.
E_BADARGS=85
MAXCONTEXTLINES=50 # Maximum number of lines to show.
DEFAULT_DICTFILE="/usr/share/dict/webster1913-dict.txt"
# Default dictionary file pathname.
# Change this as necessary.
# Note:
# ----
# This particular edition of the 1913 Webster's
#+ begins each entry with an uppercase letter
#+ (lowercase for the remaining characters).
# Only the *very first line* of an entry begins this way,
#+ and that's why the search algorithm below works.
if [[ -z $(echo "$1" | sed -n '/^[A-Z]/p') ]]
# Must at least specify word to look up, and
#+ it must start with an uppercase letter.
then
echo "Usage: `basename $0` Word-to-define [dictionary-file]"
echo
echo "Note: Word to look up must start with capital letter,"
echo "with the rest of the word in lowercase."
echo "--------------------------------------------"
echo "Examples: Abandon, Dictionary, Marking, etc."
exit $E_BADARGS
fi
if [ -z "$2" ] # May specify different dictionary
#+ as an argument to this script.
then
dictfile=$DEFAULT_DICTFILE
else
dictfile="$2"
fi
# ---------------------------------------------------------
Definition=$(fgrep -A $MAXCONTEXTLINES "$1 " "$dictfile")
# Definitions in form "Word ..."
#
# And, yes, "fgrep" is fast enough
Chapter 15. External Filters, Programs and Commands 241](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-247-320.jpg)
![Advanced Bash-Scripting Guide
#+ to search even a very large text file.
# Now, snip out just the definition block.
echo "$Definition" |
sed -n '1,/^[A-Z]/p' |
# Print from first line of output
#+ to the first line of the next entry.
sed '$d' | sed '$d'
# Delete last two lines of output
#+ (blank line and first line of next entry).
# ---------------------------------------------------------
exit $?
# Exercises:
# ---------
# 1) Modify the script to accept any type of alphabetic input
# + (uppercase, lowercase, mixed case), and convert it
# + to an acceptable format for processing.
#
# 2) Convert the script to a GUI application,
# + using something like 'gdialog' or 'zenity' . . .
# The script will then no longer take its argument(s)
# + from the command-line.
#
# 3) Modify the script to parse one of the other available
# + Public Domain Dictionaries, such as the U.S. Census Bureau Gazetteer.
See also Example A-41 for an example of speedy fgrep lookup on a large text file.
agrep (approximate grep) extends the capabilities of grep to approximate matching. The search string
may differ by a specified number of characters from the resulting matches. This utility is not part of
the core Linux distribution.
To search compressed files, use zgrep, zegrep, or zfgrep. These also work on
non-compressed files, though slower than plain grep, egrep, fgrep. They are handy
for searching through a mixed set of files, some compressed, some not.
To search bzipped files, use bzgrep.
look
The command look works like grep, but does a lookup on a "dictionary," a sorted word list. By
default, look searches for a match in /usr/dict/words, but a different dictionary file may be
specified.
Example 15-20. Checking words in a list for validity
#!/bin/bash
# lookup: Does a dictionary lookup on each word in a data file.
file=words.data # Data file from which to read words to test.
Chapter 15. External Filters, Programs and Commands 242](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-248-320.jpg)
![Advanced Bash-Scripting Guide
echo
while [ "$word" != end ] # Last word in data file.
do # ^^^
read word # From data file, because of redirection at end of loop.
look $word > /dev/null # Don't want to display lines in dictionary file.
lookup=$? # Exit status of 'look' command.
if [ "$lookup" -eq 0 ]
then
echo ""$word" is valid."
else
echo ""$word" is invalid."
fi
done <"$file" # Redirects stdin to $file, so "reads" come from there.
echo
exit 0
# ----------------------------------------------------------------
# Code below line will not execute because of "exit" command above.
# Stephane Chazelas proposes the following, more concise alternative:
while read word && [[ $word != end ]]
do if look "$word" > /dev/null
then echo ""$word" is valid."
else echo ""$word" is invalid."
fi
done <"$file"
exit 0
sed, awk
Scripting languages especially suited for parsing text files and command output. May be embedded
singly or in combination in pipes and shell scripts.
sed
Non-interactive "stream editor", permits using many ex commands in batch mode. It finds many uses
in shell scripts.
awk
Programmable file extractor and formatter, good for manipulating and/or extracting fields (columns)
in structured text files. Its syntax is similar to C.
wc
wc gives a "word count" on a file or I/O stream:
bash $ wc /usr/share/doc/sed-4.1.2/README
13 70 447 README
[13 lines 70 words 447 characters]
wc -w gives only the word count.
wc -l gives only the line count.
wc -c gives only the byte count.
wc -m gives only the character count.
Chapter 15. External Filters, Programs and Commands 243](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-249-320.jpg)
![Advanced Bash-Scripting Guide
wc -L gives only the length of the longest line.
Using wc to count how many .txt files are in current working directory:
$ ls *.txt | wc -l
# Will work as long as none of the "*.txt" files
#+ have a linefeed embedded in their name.
# Alternative ways of doing this are:
# find . -maxdepth 1 -name *.txt -print0 | grep -cz .
# (shopt -s nullglob; set -- *.txt; echo $#)
# Thanks, S.C.
Using wc to total up the size of all the files whose names begin with letters in the range d - h
bash$ wc [d-h]* | grep total | awk '{print $3}'
71832
Using wc to count the instances of the word "Linux" in the main source file for this book.
bash$ grep Linux abs-book.sgml | wc -l
50
See also Example 15-39 and Example 19-8.
Certain commands include some of the functionality of wc as options.
... | grep foo | wc -l
# This frequently used construct can be more concisely rendered.
... | grep -c foo
# Just use the "-c" (or "--count") option of grep.
# Thanks, S.C.
tr
character translation filter.
Must use quoting and/or brackets, as appropriate. Quotes prevent the shell from
reinterpreting the special characters in tr command sequences. Brackets should be
quoted to prevent expansion by the shell.
Either tr "A-Z" "*" <filename or tr A-Z * <filename changes all the uppercase
letters in filename to asterisks (writes to stdout). On some systems this may not work, but tr
A-Z '[**]' will.
The -d option deletes a range of characters.
echo "abcdef" # abcdef
echo "abcdef" | tr -d b-d # aef
tr -d 0-9 <filename
# Deletes all digits from the file "filename".
The --squeeze-repeats (or -s) option deletes all but the first instance of a string of
consecutive characters. This option is useful for removing excess whitespace.
Chapter 15. External Filters, Programs and Commands 244](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-250-320.jpg)
![Advanced Bash-Scripting Guide
bash$ echo "XXXXX" | tr --squeeze-repeats 'X'
X
The -c "complement" option inverts the character set to match. With this option, tr acts only upon
those characters not matching the specified set.
bash$ echo "acfdeb123" | tr -c b-d +
+c+d+b++++
Note that tr recognizes POSIX character classes. [65]
bash$ echo "abcd2ef1" | tr '[:alpha:]' -
----2--1
Example 15-21. toupper: Transforms a file to all uppercase.
#!/bin/bash
# Changes a file to all uppercase.
E_BADARGS=85
if [ -z "$1" ] # Standard check for command-line arg.
then
echo "Usage: `basename $0` filename"
exit $E_BADARGS
fi
tr a-z A-Z <"$1"
# Same effect as above, but using POSIX character set notation:
# tr '[:lower:]' '[:upper:]' <"$1"
# Thanks, S.C.
exit 0
# Exercise:
# Rewrite this script to give the option of changing a file
#+ to *either* upper or lowercase.
Example 15-22. lowercase: Changes all filenames in working directory to lowercase.
#!/bin/bash
#
# Changes every filename in working directory to all lowercase.
#
# Inspired by a script of John Dubois,
#+ which was translated into Bash by Chet Ramey,
#+ and considerably simplified by the author of the ABS Guide.
for filename in * # Traverse all files in directory.
do
fname=`basename $filename`
n=`echo $fname | tr A-Z a-z` # Change name to lowercase.
if [ "$fname" != "$n" ] # Rename only files not already lowercase.
then
mv $fname $n
fi
done
Chapter 15. External Filters, Programs and Commands 245](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-251-320.jpg)
![Advanced Bash-Scripting Guide
exit $?
# Code below this line will not execute because of "exit".
#--------------------------------------------------------#
# To run it, delete script above line.
# The above script will not work on filenames containing blanks or newlines.
# Stephane Chazelas therefore suggests the following alternative:
for filename in * # Not necessary to use basename,
# since "*" won't return any file containing "/".
do n=`echo "$filename/" | tr '[:upper:]' '[:lower:]'`
# POSIX char set notation.
# Slash added so that trailing newlines are not
# removed by command substitution.
# Variable substitution:
n=${n%/} # Removes trailing slash, added above, from filename.
[[ $filename == $n ]] || mv "$filename" "$n"
# Checks if filename already lowercase.
done
exit $?
Example 15-23. du: DOS to UNIX text file conversion.
#!/bin/bash
# Du.sh: DOS to UNIX text file converter.
E_WRONGARGS=65
if [ -z "$1" ]
then
echo "Usage: `basename $0` filename-to-convert"
exit $E_WRONGARGS
fi
NEWFILENAME=$1.unx
CR='015' # Carriage return.
# 015 is octal ASCII code for CR.
# Lines in a DOS text file end in CR-LF.
# Lines in a UNIX text file end in LF only.
tr -d $CR < $1 > $NEWFILENAME
# Delete CR's and write to new file.
echo "Original DOS text file is "$1"."
echo "Converted UNIX text file is "$NEWFILENAME"."
exit 0
# Exercise:
# --------
# Change the above script to convert from UNIX to DOS.
Example 15-24. rot13: ultra-weak encryption.
Chapter 15. External Filters, Programs and Commands 246](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-252-320.jpg)
![Advanced Bash-Scripting Guide
tr variants
The tr utility has two historic variants. The BSD version does not use brackets (tr a-z A-Z), but
the SysV one does (tr '[a-z]' '[A-Z]'). The GNU version of tr resembles the BSD one.
fold
A filter that wraps lines of input to a specified width. This is especially useful with the -s option,
which breaks lines at word spaces (see Example 15-26 and Example A-1).
fmt
Simple-minded file formatter, used as a filter in a pipe to "wrap" long lines of text output.
Example 15-26. Formatted file listing.
#!/bin/bash
WIDTH=40 # 40 columns wide.
b=`ls /usr/local/bin` # Get a file listing...
echo $b | fmt -w $WIDTH
# Could also have been done by
# echo $b | fold - -s -w $WIDTH
exit 0
See also Example 15-5.
A powerful alternative to fmt is Kamil Toman's par utility, available from
http://www.cs.berkeley.edu/~amc/Par/.
col
This deceptively named filter removes reverse line feeds from an input stream. It also attempts to
replace whitespace with equivalent tabs. The chief use of col is in filtering the output from certain text
processing utilities, such as groff and tbl.
column
Column formatter. This filter transforms list-type text output into a "pretty-printed" table by inserting
tabs at appropriate places.
Example 15-27. Using column to format a directory listing
#!/bin/bash
# colms.sh
# A minor modification of the example file in the "column" man page.
(printf "PERMISSIONS LINKS OWNER GROUP SIZE MONTH DAY HH:MM PROG-NAMEn"
; ls -l | sed 1d) | column -t
# ^^^^^^ ^^
# The "sed 1d" in the pipe deletes the first line of output,
#+ which would be "total N",
#+ where "N" is the total number of files found by "ls -l".
# The -t option to "column" pretty-prints a table.
Chapter 15. External Filters, Programs and Commands 248](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-254-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
# manview.sh: Formats the source of a man page for viewing.
# This script is useful when writing man page source.
# It lets you look at the intermediate results on the fly
#+ while working on it.
E_WRONGARGS=85
if [ -z "$1" ]
then
echo "Usage: `basename $0` filename"
exit $E_WRONGARGS
fi
# ---------------------------
groff -Tascii -man $1 | less
# From the man page for groff.
# ---------------------------
# If the man page includes tables and/or equations,
#+ then the above code will barf.
# The following line can handle such cases.
#
# gtbl < "$1" | geqn -Tlatin1 | groff -Tlatin1 -mtty-char -man
#
# Thanks, S.C.
exit $? # See also the "maned.sh" script.
See also Example A-39.
lex, yacc
The lex lexical analyzer produces programs for pattern matching. This has been replaced by the
nonproprietary flex on Linux systems.
The yacc utility creates a parser based on a set of specifications. This has been replaced by the
nonproprietary bison on Linux systems.
15.5. File and Archiving Commands
Archiving
tar
The standard UNIX archiving utility. [66] Originally a Tape ARchiving program, it has developed into
a general purpose package that can handle all manner of archiving with all types of destination
devices, ranging from tape drives to regular files to even stdout (see Example 3-4). GNU tar has
been patched to accept various compression filters, for example: tar czvf archive_name.tar.gz *,
which recursively archives and gzips all files in a directory tree except dotfiles in the current working
directory ($PWD). [67]
Some useful tar options:
1. -c create (a new archive)
2. -x extract (files from existing archive)
Chapter 15. External Filters, Programs and Commands 251](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-257-320.jpg)
![Advanced Bash-Scripting Guide
mktemp-1.5-11
perl-5.6.0-17
reiserfs-utils-3.x.0j-2
...
bash$ rpm -qa docbook-utils
docbook-utils-0.6.9-2
bash$ rpm -qa docbook | grep docbook
docbook-dtd31-sgml-1.0-10
docbook-style-dsssl-1.64-3
docbook-dtd30-sgml-1.0-10
docbook-dtd40-sgml-1.0-11
docbook-utils-pdf-0.6.9-2
docbook-dtd41-sgml-1.0-10
docbook-utils-0.6.9-2
cpio
This specialized archiving copy command (copy input and output) is rarely seen any more, having
been supplanted by tar/gzip. It still has its uses, such as moving a directory tree. With an appropriate
block size (for copying) specified, it can be appreciably faster than tar.
Example 15-30. Using cpio to move a directory tree
#!/bin/bash
# Copying a directory tree using cpio.
# Advantages of using 'cpio':
# Speed of copying. It's faster than 'tar' with pipes.
# Well suited for copying special files (named pipes, etc.)
#+ that 'cp' may choke on.
ARGS=2
E_BADARGS=65
if [ $# -ne "$ARGS" ]
then
echo "Usage: `basename $0` source destination"
exit $E_BADARGS
fi
source="$1"
destination="$2"
###################################################################
find "$source" -depth | cpio -admvp "$destination"
# ^^^^^ ^^^^^
# Read the 'find' and 'cpio' info pages to decipher these options.
# The above works only relative to $PWD (current directory) . . .
#+ full pathnames are specified.
###################################################################
# Exercise:
# --------
Chapter 15. External Filters, Programs and Commands 253](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-259-320.jpg)
![Advanced Bash-Scripting Guide
test.tar.gz: gzip compressed data, deflated,
last modified: Sun Sep 16 13:34:51 2001, os: Unix
bash file -z test.tar.gz
test.tar.gz: GNU tar archive (gzip compressed data, deflated,
last modified: Sun Sep 16 13:34:51 2001, os: Unix)
# Find sh and Bash scripts in a given directory:
DIRECTORY=/usr/local/bin
KEYWORD=Bourne
# Bourne and Bourne-Again shell scripts
file $DIRECTORY/* | fgrep $KEYWORD
# Output:
# /usr/local/bin/burn-cd: Bourne-Again shell script text executable
# /usr/local/bin/burnit: Bourne-Again shell script text executable
# /usr/local/bin/cassette.sh: Bourne shell script text executable
# /usr/local/bin/copy-cd: Bourne-Again shell script text executable
# . . .
Example 15-32. Stripping comments from C program files
#!/bin/bash
# strip-comment.sh: Strips out the comments (/* COMMENT */) in a C program.
E_NOARGS=0
E_ARGERROR=66
E_WRONG_FILE_TYPE=67
if [ $# -eq "$E_NOARGS" ]
then
echo "Usage: `basename $0` C-program-file" >&2 # Error message to stderr.
exit $E_ARGERROR
fi
# Test for correct file type.
type=`file $1 | awk '{ print $2, $3, $4, $5 }'`
# "file $1" echoes file type . . .
# Then awk removes the first field, the filename . . .
# Then the result is fed into the variable "type."
correct_type="ASCII C program text"
if [ "$type" != "$correct_type" ]
then
echo
echo "This script works on C program files only."
echo
exit $E_WRONG_FILE_TYPE
fi
# Rather cryptic sed script:
#--------
sed '
/^/*/d
/.**//d
' $1
Chapter 15. External Filters, Programs and Commands 256](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-262-320.jpg)
![Advanced Bash-Scripting Guide
#--------
# Easy to understand if you take several hours to learn sed fundamentals.
# Need to add one more line to the sed script to deal with
#+ case where line of code has a comment following it on same line.
# This is left as a non-trivial exercise.
# Also, the above code deletes non-comment lines with a "*/" . . .
#+ not a desirable result.
exit 0
# ----------------------------------------------------------------
# Code below this line will not execute because of 'exit 0' above.
# Stephane Chazelas suggests the following alternative:
usage() {
echo "Usage: `basename $0` C-program-file" >&2
exit 1
}
WEIRD=`echo -n -e '377'` # or WEIRD=$'377'
[[ $# -eq 1 ]] || usage
case `file "$1"` in
*"C program text"*) sed -e "s%/*%${WEIRD}%g;s%*/%${WEIRD}%g" "$1"
| tr '377n' 'n377'
| sed -ne 'p;n'
| tr -d 'n' | tr '377' 'n';;
*) usage;;
esac
# This is still fooled by things like:
# printf("/*");
# or
# /* /* buggy embedded comment */
#
# To handle all special cases (comments in strings, comments in string
#+ where there is a ", " ...),
#+ the only way is to write a C parser (using lex or yacc perhaps?).
exit 0
which
which command gives the full path to "command." This is useful for finding out whether a particular
command or utility is installed on the system.
$bash which rm
/usr/bin/rm
For an interesting use of this command, see Example 33-14.
whereis
Similar to which, above, whereis command gives the full path to "command," but also to its
manpage.
$bash whereis rm
Chapter 15. External Filters, Programs and Commands 257](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-263-320.jpg)
![Advanced Bash-Scripting Guide
if [ $# -ne $ARGS ]
then
echo "Usage: `basename $0` filename"
exit $E_BADARGS
fi
if [ ! -f "$1" ] # Check if file exists.
then
echo "File "$1" does not exist."
exit $E_NOFILE
fi
# ===========================================================
MINSTRLEN=3 # Minimum string length.
WORDFILE=/usr/share/dict/linux.words # Dictionary file.
# May specify a different word list file
#+ of one-word-per-line format.
# For example, the "yawl" word-list package,
# http://bash.neuralshortcircuit.com/yawl-0.3.2.tar.gz
wlist=`strings "$1" | tr A-Z a-z | tr '[:space:]' Z |
tr -cs '[:alpha:]' Z | tr -s '173-377' Z | tr Z ' '`
# Translate output of 'strings' command with multiple passes of 'tr'.
# "tr A-Z a-z" converts to lowercase.
# "tr '[:space:]'" converts whitespace characters to Z's.
# "tr -cs '[:alpha:]' Z" converts non-alphabetic characters to Z's,
#+ and squeezes multiple consecutive Z's.
# "tr -s '173-377' Z" converts all characters past 'z' to Z's
#+ and squeezes multiple consecutive Z's,
#+ which gets rid of all the weird characters that the previous
#+ translation failed to deal with.
# Finally, "tr Z ' '" converts all those Z's to whitespace,
#+ which will be seen as word separators in the loop below.
# ****************************************************************
# Note the technique of feeding the output of 'tr' back to itself,
#+ but with different arguments and/or options on each pass.
# ****************************************************************
for word in $wlist # Important:
# $wlist must not be quoted here.
# "$wlist" does not work.
# Why not?
do
strlen=${#word} # String length.
if [ "$strlen" -lt "$MINSTRLEN" ] # Skip over short strings.
then
continue
fi
grep -Fw $word "$WORDFILE" # Match whole words only.
# ^^^ # "Fixed strings" and
#+ "whole words" options.
done
Chapter 15. External Filters, Programs and Commands 260](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-266-320.jpg)
![Advanced Bash-Scripting Guide
Use diffstat to create a histogram (point-distribution graph) of output from diff.
diff3, merge
An extended version of diff that compares three files at a time. This command returns an exit value of
0 upon successful execution, but unfortunately this gives no information about the results of the
comparison.
bash$ diff3 file-1 file-2 file-3
====
1:1c
This is line 1 of "file-1".
2:1c
This is line 1 of "file-2".
3:1c
This is line 1 of "file-3"
The merge (3-way file merge) command is an interesting adjunct to diff3. Its syntax is merge
Mergefile file1 file2. The result is to output to Mergefile the changes that lead from
file1 to file2. Consider this command a stripped-down version of patch.
sdiff
Compare and/or edit two files in order to merge them into an output file. Because of its interactive
nature, this command would find little use in a script.
cmp
The cmp command is a simpler version of diff, above. Whereas diff reports the differences between
two files, cmp merely shows at what point they differ.
Like diff, cmp returns an exit status of 0 if the compared files are identical, and 1 if
they differ. This permits use in a test construct within a shell script.
Example 15-35. Using cmp to compare two files within a script.
#!/bin/bash
ARGS=2 # Two args to script expected.
E_BADARGS=65
E_UNREADABLE=66
if [ $# -ne "$ARGS" ]
then
echo "Usage: `basename $0` file1 file2"
exit $E_BADARGS
fi
if [[ ! -r "$1" || ! -r "$2" ]]
then
echo "Both files to be compared must exist and be readable."
exit $E_UNREADABLE
fi
cmp $1 $2 &> /dev/null # /dev/null buries the output of the "cmp" command.
# cmp -s $1 $2 has same result ("-s" silent flag to "cmp")
# Thank you Anders Gustavsson for pointing this out.
#
# Also works with 'diff', i.e., diff $1 $2 &> /dev/null
if [ $? -eq 0 ] # Test exit status of "cmp" command.
then
Chapter 15. External Filters, Programs and Commands 262](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-268-320.jpg)
![Advanced Bash-Scripting Guide
echo "The home of my home is `dirname ~/`." # `dirname ~` also works.
exit 0
split, csplit
These are utilities for splitting a file into smaller chunks. Their usual use is for splitting up large files
in order to back them up on floppies or preparatory to e-mailing or uploading them.
The csplit command splits a file according to context, the split occuring where patterns are matched.
Example 15-37. A script that copies itself in sections
#!/bin/bash
# splitcopy.sh
# A script that splits itself into chunks,
#+ then reassembles the chunks into an exact copy
#+ of the original script.
CHUNKSIZE=4 # Size of first chunk of split files.
OUTPREFIX=xx # csplit prefixes, by default,
#+ files with "xx" ...
csplit "$0" "$CHUNKSIZE"
# Some comment lines for padding . . .
# Line 15
# Line 16
# Line 17
# Line 18
# Line 19
# Line 20
cat "$OUTPREFIX"* > "$0.copy" # Concatenate the chunks.
rm "$OUTPREFIX"* # Get rid of the chunks.
exit $?
Encoding and Encryption
sum, cksum, md5sum, sha1sum
These are utilities for generating checksums. A checksum is a number [68] mathematically calculated
from the contents of a file, for the purpose of checking its integrity. A script might refer to a list of
checksums for security purposes, such as ensuring that the contents of key system files have not been
altered or corrupted. For security applications, use the md5sum (message digest 5 checksum)
command, or better yet, the newer sha1sum (Secure Hash Algorithm). [69]
bash$ cksum /boot/vmlinuz
1670054224 804083 /boot/vmlinuz
bash$ echo -n "Top Secret" | cksum
3391003827 10
bash$ md5sum /boot/vmlinuz
0f43eccea8f09e0a0b2b5cf1dcf333ba /boot/vmlinuz
Chapter 15. External Filters, Programs and Commands 264](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-270-320.jpg)
![Advanced Bash-Scripting Guide
bash$ echo -n "Top Secret" | md5sum
8babc97a6f62a4649716f4df8d61728f -
The cksum command shows the size, in bytes, of its target, whether file or stdout.
The md5sum and sha1sum commands display a dash when they receive their input
from stdout.
Example 15-38. Checking file integrity
#!/bin/bash
# file-integrity.sh: Checking whether files in a given directory
# have been tampered with.
E_DIR_NOMATCH=70
E_BAD_DBFILE=71
dbfile=File_record.md5
# Filename for storing records (database file).
set_up_database ()
{
echo ""$directory"" > "$dbfile"
# Write directory name to first line of file.
md5sum "$directory"/* >> "$dbfile"
# Append md5 checksums and filenames.
}
check_database ()
{
local n=0
local filename
local checksum
# ------------------------------------------- #
# This file check should be unnecessary,
#+ but better safe than sorry.
if [ ! -r "$dbfile" ]
then
echo "Unable to read checksum database file!"
exit $E_BAD_DBFILE
fi
# ------------------------------------------- #
while read record[n]
do
directory_checked="${record[0]}"
if [ "$directory_checked" != "$directory" ]
then
echo "Directories do not match up!"
# Tried to use file for a different directory.
exit $E_DIR_NOMATCH
fi
if [ "$n" -gt 0 ] # Not directory name.
Chapter 15. External Filters, Programs and Commands 265](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-271-320.jpg)
![Advanced Bash-Scripting Guide
then
filename[n]=$( echo ${record[$n]} | awk '{ print $2 }' )
# md5sum writes records backwards,
#+ checksum first, then filename.
checksum[n]=$( md5sum "${filename[n]}" )
if [ "${record[n]}" = "${checksum[n]}" ]
then
echo "${filename[n]} unchanged."
elif [ "`basename ${filename[n]}`" != "$dbfile" ]
# Skip over checksum database file,
#+ as it will change with each invocation of script.
# ---
# This unfortunately means that when running
#+ this script on $PWD, tampering with the
#+ checksum database file will not be detected.
# Exercise: Fix this.
then
echo "${filename[n]} : CHECKSUM ERROR!"
# File has been changed since last checked.
fi
fi
let "n+=1"
done <"$dbfile" # Read from checksum database file.
}
# =================================================== #
# main ()
if [ -z "$1" ]
then
directory="$PWD" # If not specified,
else #+ use current working directory.
directory="$1"
fi
clear # Clear screen.
echo " Running file integrity check on $directory"
echo
# ------------------------------------------------------------------ #
if [ ! -r "$dbfile" ] # Need to create database file?
then
echo "Setting up database file, ""$directory"/"$dbfile""."; echo
set_up_database
fi
# ------------------------------------------------------------------ #
check_database # Do the actual work.
echo
# You may wish to redirect the stdout of this script to a file,
#+ especially if the directory checked has many files in it.
Chapter 15. External Filters, Programs and Commands 266](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-272-320.jpg)
![Advanced Bash-Scripting Guide
exit 0
# For a much more thorough file integrity check,
#+ consider the "Tripwire" package,
#+ http://sourceforge.net/projects/tripwire/.
Also see Example A-19, Example 33-14, and Example 9-11 for creative uses of the md5sum
command.
There have been reports that the 128-bit md5sum can be cracked, so the more secure
160-bit sha1sum is a welcome new addition to the checksum toolkit.
bash$ md5sum testfile
e181e2c8720c60522c4c4c981108e367 testfile
bash$ sha1sum testfile
5d7425a9c08a66c3177f1e31286fa40986ffc996 testfile
Security consultants have demonstrated that even sha1sum can be compromised. Fortunately, newer
Linux distros include longer bit-length sha224sum, sha256sum, sha384sum, and sha512sum
commands.
uuencode
This utility encodes binary files (images, sound files, compressed files, etc.) into ASCII characters,
making them suitable for transmission in the body of an e-mail message or in a newsgroup posting.
This is especially useful where MIME (multimedia) encoding is not available.
uudecode
This reverses the encoding, decoding uuencoded files back into the original binaries.
Example 15-39. Uudecoding encoded files
#!/bin/bash
# Uudecodes all uuencoded files in current working directory.
lines=35 # Allow 35 lines for the header (very generous).
for File in * # Test all the files in $PWD.
do
search1=`head -n $lines $File | grep begin | wc -w`
search2=`tail -n $lines $File | grep end | wc -w`
# Uuencoded files have a "begin" near the beginning,
#+ and an "end" near the end.
if [ "$search1" -gt 0 ]
then
if [ "$search2" -gt 0 ]
then
echo "uudecoding - $File -"
uudecode $File
fi
fi
done
# Note that running this script upon itself fools it
#+ into thinking it is a uuencoded file,
#+ because it contains both "begin" and "end".
# Exercise:
Chapter 15. External Filters, Programs and Commands 267](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-273-320.jpg)
![Advanced Bash-Scripting Guide
# --------
# Modify this script to check each file for a newsgroup header,
#+ and skip to next if not found.
exit 0
The fold -s command may be useful (possibly in a pipe) to process long uudecoded
text messages downloaded from Usenet newsgroups.
mimencode, mmencode
The mimencode and mmencode commands process multimedia-encoded e-mail attachments.
Although mail user agents (such as pine or kmail) normally handle this automatically, these particular
utilities permit manipulating such attachments manually from the command-line or in batch
processing mode by means of a shell script.
crypt
At one time, this was the standard UNIX file encryption utility. [70] Politically-motivated government
regulations prohibiting the export of encryption software resulted in the disappearance of crypt from
much of the UNIX world, and it is still missing from most Linux distributions. Fortunately,
programmers have come up with a number of decent alternatives to it, among them the author's very
own cruft (see Example A-4).
openssl
This is an Open Source implementation of Secure Sockets Layer encryption.
# To encrypt a file:
openssl aes-128-ecb -salt -in file.txt -out file.encrypted
-pass pass:my_password
# ^^^^^^^^^^^ User-selected password.
# aes-128-ecb is the encryption method chosen.
# To decrypt an openssl-encrypted file:
openssl aes-128-ecb -d -salt -in file.encrypted -out file.txt
-pass pass:my_password
# ^^^^^^^^^^^ User-selected password.
Piping openssl to/from tar makes it possible to encrypt an entire directory tree.
# To encrypt a directory:
sourcedir="/home/bozo/testfiles"
encrfile="encr-dir.tar.gz"
password=my_secret_password
tar czvf - "$sourcedir" |
openssl des3 -salt -out "$encrfile" -pass pass:"$password"
# ^^^^ Uses des3 encryption.
# Writes encrypted file "encr-dir.tar.gz" in current working directory.
# To decrypt the resulting tarball:
openssl des3 -d -salt -in "$encrfile" -pass pass:"$password" |
tar -xzv
# Decrypts and unpacks into current working directory.
Of course, openssl has many other uses, such as obtaining signed certificates for Web sites. See the
info page.
shred
Securely erase a file by overwriting it multiple times with random bit patterns before deleting it. This
command has the same effect as Example 15-60, but does it in a more thorough and elegant manner.
Chapter 15. External Filters, Programs and Commands 268](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-274-320.jpg)
![Advanced Bash-Scripting Guide
This is one of the GNU fileutils.
Advanced forensic technology may still be able to recover the contents of a file, even
after application of shred.
Miscellaneous
mktemp
Create a temporary file [71] with a "unique" filename. When invoked from the command-line without
additional arguments, it creates a zero-length file in the /tmp directory.
bash$ mktemp
/tmp/tmp.zzsvql3154
PREFIX=filename
tempfile=`mktemp $PREFIX.XXXXXX`
# ^^^^^^ Need at least 6 placeholders
#+ in the filename template.
# If no filename template supplied,
#+ "tmp.XXXXXXXXXX" is the default.
echo "tempfile name = $tempfile"
# tempfile name = filename.QA2ZpY
# or something similar...
# Creates a file of that name in the current working directory
#+ with 600 file permissions.
# A "umask 177" is therefore unnecessary,
#+ but it's good programming practice anyhow.
make
Utility for building and compiling binary packages. This can also be used for any set of operations
triggered by incremental changes in source files.
The make command checks a Makefile, a list of file dependencies and operations to be carried out.
The make utility is, in effect, a powerful scripting language similar in many ways to Bash, but with
the capability of recognizing dependencies. For in-depth coverage of this useful tool set, see the GNU
software documentation site.
install
Special purpose file copying command, similar to cp, but capable of setting permissions and attributes
of the copied files. This command seems tailormade for installing software packages, and as such it
shows up frequently in Makefiles (in the make install : section). It could likewise prove
useful in installation scripts.
dos2unix
This utility, written by Benjamin Lin and collaborators, converts DOS-formatted text files (lines
terminated by CR-LF) to UNIX format (lines terminated by LF only), and vice-versa.
ptx
The ptx [targetfile] command outputs a permuted index (cross-reference list) of the targetfile. This
may be further filtered and formatted in a pipe, if necessary.
more, less
Pagers that display a text file or stream to stdout, one screenful at a time. These may be used to
Chapter 15. External Filters, Programs and Commands 269](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-275-320.jpg)
![Advanced Bash-Scripting Guide
Some interesting options to dig are +time=N for setting a query timeout to N seconds, +nofail for
continuing to query servers until a reply is received, and -x for doing a reverse address lookup.
Compare the output of dig -x with ipcalc -h and nslookup.
bash$ dig -x 81.9.6.2
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 11649
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;2.6.9.81.in-addr.arpa. IN PTR
;; AUTHORITY SECTION:
6.9.81.in-addr.arpa. 3600 IN SOA ns.eltel.net. noc.eltel.net.
2002031705 900 600 86400 3600
;; Query time: 537 msec
;; SERVER: 135.116.137.2#53(135.116.137.2)
;; WHEN: Wed Jun 26 08:35:24 2002
;; MSG SIZE rcvd: 91
Example 15-40. Finding out where to report a spammer
#!/bin/bash
# spam-lookup.sh: Look up abuse contact to report a spammer.
# Thanks, Michael Zick.
# Check for command-line arg.
ARGCOUNT=1
E_WRONGARGS=65
if [ $# -ne "$ARGCOUNT" ]
then
echo "Usage: `basename $0` domain-name"
exit $E_WRONGARGS
fi
dig +short $1.contacts.abuse.net -c in -t txt
# Also try:
# dig +nssearch $1
# Tries to find "authoritative name servers" and display SOA records.
# The following also works:
# whois -h whois.abuse.net $1
# ^^ ^^^^^^^^^^^^^^^ Specify host.
# Can even lookup multiple spammers with this, i.e."
# whois -h whois.abuse.net $spamdomain1 $spamdomain2 . . .
# Exercise:
# --------
# Expand the functionality of this script
#+ so that it automatically e-mails a notification
#+ to the responsible ISP's contact address(es).
# Hint: use the "mail" command.
exit $?
Chapter 15. External Filters, Programs and Commands 271](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-277-320.jpg)
![Advanced Bash-Scripting Guide
IFS=$ADR_IFS
dns=( $1 )
IFS=$WSP_IFS
if [ "${dns[0]}" == '127' ]
then
# See if there is a reason.
echo $(dig +short $2 -t txt)
fi
}
# Get the dns address resource record.
# chk_adr <rev_dns> <list_server>
chk_adr() {
local reply
local server
local reason
server=${1}${2}
reply=$( dig +short ${server} )
# If reply might be an error code . . .
if [ ${#reply} -gt 6 ]
then
reason=$(get_txt ${reply} ${server} )
reason=${reason:-${reply}}
fi
echo ${reason:-' not blacklisted.'}
}
# Need to get the IP address from the name.
echo 'Get address of: '$1
ip_adr=$(dig +short $1)
dns_reply=${ip_adr:-' no answer '}
echo ' Found address: '${dns_reply}
# A valid reply is at least 4 digits plus 3 dots.
if [ ${#ip_adr} -gt 6 ]
then
echo
declare query
# Parse by assignment at the dots.
declare -a dns
IFS=$ADR_IFS
dns=( ${ip_adr} )
IFS=$WSP_IFS
# Reorder octets into dns query order.
rev_dns="${dns[3]}"'.'"${dns[2]}"'.'"${dns[1]}"'.'"${dns[0]}"'.'
# See: http://www.spamhaus.org (Conservative, well maintained)
echo -n 'spamhaus.org says: '
echo $(chk_adr ${rev_dns} 'sbl-xbl.spamhaus.org')
# See: http://ordb.org (Open mail relays)
echo -n ' ordb.org says: '
echo $(chk_adr ${rev_dns} 'relays.ordb.org')
# See: http://www.spamcop.net/ (You can report spammers here)
echo -n ' spamcop.net says: '
echo $(chk_adr ${rev_dns} 'bl.spamcop.net')
Chapter 15. External Filters, Programs and Commands 273](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-279-320.jpg)
![Advanced Bash-Scripting Guide
--- localhost.localdomain ping statistics ---
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max/mdev = 0.286/0.497/0.709/0.212 ms
A successful ping returns an exit status of 0. This can be tested for in a script.
HNAME=nastyspammer.com
# HNAME=$HOST # Debug: test for localhost.
count=2 # Send only two pings.
if [[ `ping -c $count "$HNAME"` ]]
then
echo ""$HNAME" still up and broadcasting spam your way."
else
echo ""$HNAME" seems to be down. Pity."
fi
whois
Perform a DNS (Domain Name System) lookup. The -h option permits specifying which particular
whois server to query. See Example 4-6 and Example 15-40.
finger
Retrieve information about users on a network. Optionally, this command can display a user's
~/.plan, ~/.project, and ~/.forward files, if present.
bash$ finger
Login Name Tty Idle Login Time Office Office Phone
bozo Bozo Bozeman tty1 8 Jun 25 16:59 (:0)
bozo Bozo Bozeman ttyp0 Jun 25 16:59 (:0.0)
bozo Bozo Bozeman ttyp1 Jun 25 17:07 (:0.0)
bash$ finger bozo
Login: bozo Name: Bozo Bozeman
Directory: /home/bozo Shell: /bin/bash
Office: 2355 Clown St., 543-1234
On since Fri Aug 31 20:13 (MST) on tty1 1 hour 38 minutes idle
On since Fri Aug 31 20:13 (MST) on pts/0 12 seconds idle
On since Fri Aug 31 20:13 (MST) on pts/1
On since Fri Aug 31 20:31 (MST) on pts/2 1 hour 16 minutes idle
Mail last read Tue Jul 3 10:08 2007 (MST)
No Plan.
Out of security considerations, many networks disable finger and its associated daemon. [72]
chfn
Change information disclosed by the finger command.
vrfy
Verify an Internet e-mail address.
This command seems to be missing from newer Linux distros.
Remote Host Access
sx, rx
The sx and rx command set serves to transfer files to and from a remote host using the xmodem
protocol. These are generally part of a communications package, such as minicom.
Chapter 15. External Filters, Programs and Commands 275](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-281-320.jpg)
![Advanced Bash-Scripting Guide
E_NOPARAMS=86
if [ -z "$1" ] # Must specify a stock (symbol) to fetch.
then echo "Usage: `basename $0` stock-symbol"
exit $E_NOPARAMS
fi
stock_symbol=$1
file_suffix=.html
# Fetches an HTML file, so name it appropriately.
URL='http://finance.yahoo.com/q?s='
# Yahoo finance board, with stock query suffix.
# -----------------------------------------------------------
wget -O ${stock_symbol}${file_suffix} "${URL}${stock_symbol}"
# -----------------------------------------------------------
# To look up stuff on http://search.yahoo.com:
# -----------------------------------------------------------
# URL="http://search.yahoo.com/search?fr=ush-news&p=${query}"
# wget -O "$savefilename" "${URL}"
# -----------------------------------------------------------
# Saves a list of relevant URLs.
exit $?
# Exercises:
# ---------
#
# 1) Add a test to ensure the user running the script is on-line.
# (Hint: parse the output of 'ps -ax' for "ppp" or "connect."
#
# 2) Modify this script to fetch the local weather report,
#+ taking the user's zip code as an argument.
See also Example A-30 and Example A-31.
lynx
The lynx Web and file browser can be used inside a script (with the -dump option) to retrieve a file
from a Web or ftp site noninteractively.
lynx -dump http://www.xyz23.com/file01.html >$SAVEFILE
With the -traversal option, lynx starts at the HTTP URL specified as an argument, then "crawls"
through all links located on that particular server. Used together with the -crawl option, outputs
page text to a log file.
rlogin
Remote login, initates a session on a remote host. This command has security issues, so use ssh
instead.
rsh
Remote shell, executes command(s) on a remote host. This has security issues, so use ssh
instead.
rcp
Remote copy, copies files between two different networked machines.
rsync
Remote synchronize, updates (synchronizes) files between two different networked machines.
bash$ rsync -a ~/sourcedir/*txt /node1/subdirectory/
Chapter 15. External Filters, Programs and Commands 277](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-283-320.jpg)
![Advanced Bash-Scripting Guide
"/4/i386/gnbd-*"
"/4/i386/kernel-smp*"
# "/4/i386/kernel-xen*"
# "/4/i386/xen-*"
)
init () {
# Let pipe command return possible rsync error, e.g., stalled network.
set -o pipefail # Newly introduced in Bash, version 3.
TMP=${TMPDIR:-/tmp}/${0##*/}.$$ # Store refined download list.
trap "{
rm -f $TMP 2>/dev/null
}" EXIT # Clear temporary file on exit.
}
check_pid () {
# Check if process exists.
if [ -s "$PID_FILE" ]; then
echo "PID file exists. Checking ..."
PID=$(/bin/egrep -o "^[[:digit:]]+" $PID_FILE)
if /bin/ps --pid $PID &>/dev/null; then
echo "Process $PID found. ${0##*/} seems to be running!"
/usr/bin/logger -t ${0##*/}
"Process $PID found. ${0##*/} seems to be running!"
exit $E_RETURN
fi
echo "Process $PID not found. Start new process . . ."
fi
}
# Set overall file update range starting from root or $URL,
#+ according to above patterns.
set_range () {
include=
exclude=
for p in "${INCLUDE[@]}"; do
include="$include --include "$p""
done
for p in "${EXCLUDE[@]}"; do
exclude="$exclude --exclude "$p""
done
}
# Retrieve and refine rsync update list.
get_list () {
echo $$ > $PID_FILE || {
echo "Can't write to pid file $PID_FILE"
exit $E_RETURN
}
echo -n "Retrieving and refining update list . . ."
# Retrieve list -- 'eval' is needed to run rsync as a single command.
# $3 and $4 is the date and time of file creation.
# $5 is the full package name.
previous=
Chapter 15. External Filters, Programs and Commands 279](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-285-320.jpg)
![Advanced Bash-Scripting Guide
pre_file=
pre_date=0
eval /bin/nice /usr/bin/rsync
-r $include $exclude $URL |
egrep '^dr.x|^-r' |
awk '{print $3, $4, $5}' |
sort -k3 |
{ while read line; do
# Get seconds since epoch, to filter out obsolete pkgs.
cur_date=$(date -d "$(echo $line | awk '{print $1, $2}')" +%s)
# echo $cur_date
# Get file name.
cur_file=$(echo $line | awk '{print $3}')
# echo $cur_file
# Get rpm pkg name from file name, if possible.
if [[ $cur_file == *rpm ]]; then
pkg_name=$(echo $cur_file | sed -r -e
's/(^([^_-]+[_-])+)[[:digit:]]+..*[_-].*$/1/')
else
pkg_name=
fi
# echo $pkg_name
if [ -z "$pkg_name" ]; then # If not a rpm file,
echo $cur_file >> $TMP #+ then append to download list.
elif [ "$pkg_name" != "$previous" ]; then # A new pkg found.
echo $pre_file >> $TMP # Output latest file.
previous=$pkg_name # Save current.
pre_date=$cur_date
pre_file=$cur_file
elif [ "$cur_date" -gt "$pre_date" ]; then
# If same pkg, but newer,
pre_date=$cur_date #+ then update latest pointer.
pre_file=$cur_file
fi
done
echo $pre_file >> $TMP # TMP contains ALL
#+ of refined list now.
# echo "subshell=$BASH_SUBSHELL"
} # Bracket required here to let final "echo $pre_file >> $TMP"
# Remained in the same subshell ( 1 ) with the entire loop.
RET=$? # Get return code of the pipe command.
[ "$RET" -ne 0 ] && {
echo "List retrieving failed with code $RET"
exit $E_RETURN
}
echo "done"; echo
}
# Real rsync download part.
get_file () {
echo "Downloading..."
/bin/nice /usr/bin/rsync
$OPTS
--filter "merge,+/ $TMP"
Chapter 15. External Filters, Programs and Commands 280](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-286-320.jpg)
![Advanced Bash-Scripting Guide
--exclude '*'
$URL $DEST
| /usr/bin/tee $LOG
RET=$?
# --filter merge,+/ is crucial for the intention.
# + modifier means include and / means absolute path.
# Then sorted list in $TMP will contain ascending dir name and
#+ prevent the following --exclude '*' from "shortcutting the circuit."
echo "Done"
rm -f $PID_FILE 2>/dev/null
return $RET
}
# -------
# Main
init
check_pid
set_range
get_list
get_file
RET=$?
# -------
if [ "$RET" -eq 0 ]; then
/usr/bin/logger -t ${0##*/} "Fedora update mirrored successfully."
else
/usr/bin/logger -t ${0##*/}
"Fedora update mirrored with failure code: $RET"
fi
exit $RET
See also Example A-32.
Using rcp, rsync, and similar utilities with security implications in a shell script may
not be advisable. Consider, instead, using ssh, scp, or an expect script.
ssh
Secure shell, logs onto a remote host and executes commands there. This secure replacement for
telnet, rlogin, rcp, and rsh uses identity authentication and encryption. See its manpage for details.
Example 15-44. Using ssh
#!/bin/bash
# remote.bash: Using ssh.
# This example by Michael Zick.
# Used with permission.
# Presumptions:
# ------------
# fd-2 isn't being captured ( '2>/dev/null' ).
# ssh/sshd presumes stderr ('2') will display to user.
#
Chapter 15. External Filters, Programs and Commands 281](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-287-320.jpg)
![Advanced Bash-Scripting Guide
CEILING=10000 # 1 to 10000
PRIME=0
E_NOTPRIME=
is_prime ()
{
local factors
factors=( $(factor $1) ) # Load output of `factor` into array.
if [ -z "${factors[2]}" ]
# Third element of "factors" array:
#+ ${factors[2]} is 2nd factor of argument.
# If it is blank, then there is no 2nd factor,
#+ and the argument is therefore prime.
then
return $PRIME # 0
else
return $E_NOTPRIME # null
fi
}
echo
for n in $(seq $CEILING)
do
if is_prime $n
then
printf %5d $n
fi # ^ Five positions per number suffices.
done # For a higher $CEILING, adjust upward, as necessary.
echo
exit
bc
Bash can't handle floating point calculations, and it lacks operators for certain important mathematical
functions. Fortunately, bc comes to the rescue.
Not just a versatile, arbitrary precision calculation utility, bc offers many of the facilities of a
programming language.
bc has a syntax vaguely resembling C.
Since it is a fairly well-behaved UNIX utility, and may therefore be used in a pipe, bc comes in handy
in scripts.
Here is a simple template for using bc to calculate a script variable. This uses command substitution.
variable=$(echo "OPTIONS; OPERATIONS" | bc)
Example 15-47. Monthly Payment on a Mortgage
#!/bin/bash
# monthlypmt.sh: Calculates monthly payment on a mortgage.
Chapter 15. External Filters, Programs and Commands 286](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-292-320.jpg)
![Advanced Bash-Scripting Guide
# This is a modification of code in the
#+ "mcalc" (mortgage calculator) package,
#+ by Jeff Schmidt
#+ and
#+ Mendel Cooper (yours truly, the author of the ABS Guide).
# http://www.ibiblio.org/pub/Linux/apps/financial/mcalc-1.6.tar.gz [15k]
echo
echo "Given the principal, interest rate, and term of a mortgage,"
echo "calculate the monthly payment."
bottom=1.0
echo
echo -n "Enter principal (no commas) "
read principal
echo -n "Enter interest rate (percent) " # If 12%, enter "12", not ".12".
read interest_r
echo -n "Enter term (months) "
read term
interest_r=$(echo "scale=9; $interest_r/100.0" | bc) # Convert to decimal.
# ^^^^^^^^^^^^^^^^^ Divide by 100.
# "scale" determines how many decimal places.
interest_rate=$(echo "scale=9; $interest_r/12 + 1.0" | bc)
top=$(echo "scale=9; $principal*$interest_rate^$term" | bc)
# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
# Standard formula for figuring interest.
echo; echo "Please be patient. This may take a while."
let "months = $term - 1"
# ====================================================================
for ((x=$months; x > 0; x--))
do
bot=$(echo "scale=9; $interest_rate^$x" | bc)
bottom=$(echo "scale=9; $bottom+$bot" | bc)
# bottom = $(($bottom + $bot"))
done
# ====================================================================
# --------------------------------------------------------------------
# Rick Boivie pointed out a more efficient implementation
#+ of the above loop, which decreases computation time by 2/3.
# for ((x=1; x <= $months; x++))
# do
# bottom=$(echo "scale=9; $bottom * $interest_rate + 1" | bc)
# done
# And then he came up with an even more efficient alternative,
#+ one that cuts down the run time by about 95%!
# bottom=`{
# echo "scale=9; bottom=$bottom; interest_rate=$interest_rate"
Chapter 15. External Filters, Programs and Commands 287](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-293-320.jpg)
![Advanced Bash-Scripting Guide
Usage () {
echo "$PN - print number to different bases, $VER (stv '95)
usage: $PN [number ...]
If no number is given, the numbers are read from standard input.
A number may be
binary (base 2) starting with 0b (i.e. 0b1100)
octal (base 8) starting with 0 (i.e. 014)
hexadecimal (base 16) starting with 0x (i.e. 0xc)
decimal otherwise (i.e. 12)" >&2
exit $NOARGS
} # ==> Prints usage message.
Msg () {
for i # ==> in [list] missing. Why?
do echo "$PN: $i" >&2
done
}
Fatal () { Msg "$@"; exit 66; }
PrintBases () {
# Determine base of the number
for i # ==> in [list] missing...
do # ==> so operates on command-line arg(s).
case "$i" in
0b*) ibase=2;; # binary
0x*|[a-f]*|[A-F]*) ibase=16;; # hexadecimal
0*) ibase=8;; # octal
[1-9]*) ibase=10;; # decimal
*)
Msg "illegal number $i - ignored"
continue;;
esac
# Remove prefix, convert hex digits to uppercase (bc needs this).
number=`echo "$i" | sed -e 's:^0[bBxX]::' | tr '[a-f]' '[A-F]'`
# ==> Uses ":" as sed separator, rather than "/".
# Convert number to decimal
dec=`echo "ibase=$ibase; $number" | bc` # ==> 'bc' is calculator utility.
case "$dec" in
[0-9]*) ;; # number ok
*) continue;; # error: ignore
esac
# Print all conversions in one line.
# ==> 'here document' feeds command list to 'bc'.
echo `bc <<!
obase=16; "hex="; $dec
obase=10; "dec="; $dec
obase=8; "oct="; $dec
obase=2; "bin="; $dec
!
` | sed -e 's: : :g'
done
}
while [ $# -gt 0 ]
# ==> Is a "while loop" really necessary here,
Chapter 15. External Filters, Programs and Commands 289](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-295-320.jpg)
![Advanced Bash-Scripting Guide
# ==>+ since all the cases either break out of the loop
# ==>+ or terminate the script.
# ==> (Above comment by Paulo Marcel Coelho Aragao.)
do
case "$1" in
--) shift; break;;
-h) Usage;; # ==> Help message.
-*) Usage;;
*) break;; # First number
esac # ==> Error checking for illegal input might be appropriate.
shift
done
if [ $# -gt 0 ]
then
PrintBases "$@"
else # Read from stdin.
while read line
do
PrintBases $line
done
fi
exit
An alternate method of invoking bc involves using a here document embedded within a command
substitution block. This is especially appropriate when a script needs to pass a list of options and
commands to bc.
variable=`bc << LIMIT_STRING
options
statements
operations
LIMIT_STRING
`
...or...
variable=$(bc << LIMIT_STRING
options
statements
operations
LIMIT_STRING
)
Example 15-49. Invoking bc using a here document
#!/bin/bash
# Invoking 'bc' using command substitution
# in combination with a 'here document'.
var1=`bc << EOF
18.33 * 19.78
EOF
`
echo $var1 # 362.56
Chapter 15. External Filters, Programs and Commands 290](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-296-320.jpg)
![Advanced Bash-Scripting Guide
# ==========================================================
# main() {
# "Main" code block, mimmicking a C-language main() function.
# Initialize variables.
shots=0
splashes=0
thuds=0
Pi=0
error=0
while [ "$shots" -lt "$MAXSHOTS" ] # Main loop.
do
xCoord=$(get_random) # Get random X and Y coords.
yCoord=$(get_random)
hypotenuse $xCoord $yCoord # Hypotenuse of
#+ right-triangle = distance.
((shots++))
printf "#%4d " $shots
printf "Xc = %4d " $xCoord
printf "Yc = %4d " $yCoord
printf "Distance = %5d " $distance # Distance from
#+ center of lake
#+ -- the "origin" --
#+ coordinate (0,0).
if [ "$distance" -le "$DIMENSION" ]
then
echo -n "SPLASH! "
((splashes++))
else
echo -n "THUD! "
((thuds++))
fi
Pi=$(echo "scale=9; $PMULTIPLIER*$splashes/$shots" | bc)
# Multiply ratio by 4.0.
echo -n "PI ~ $Pi"
echo
done
echo
echo "After $shots shots, PI looks like approximately $Pi"
# Tends to run a bit high,
#+ probably due to round-off error and imperfect randomness of $RANDOM.
# But still usually within plus-or-minus 5% . . .
#+ a pretty good rough approximation.
error=$(echo "scale=9; $Pi - $M_PI" | bc)
pct_error=$(echo "scale=2; 100.0 * $error / $M_PI" | bc)
echo -n "Deviation from mathematical value of PI = $error"
echo " ($pct_error% error)"
echo
# End of "main" code block.
# }
# ==========================================================
exit
Chapter 15. External Filters, Programs and Commands 293](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-299-320.jpg)
![Advanced Bash-Scripting Guide
# One might well wonder whether a shell script is appropriate for
#+ an application as complex and computation-intensive as a simulation.
#
# There are at least two justifications.
# 1) As a proof of concept: to show it can be done.
# 2) To prototype and test the algorithms before rewriting
#+ it in a compiled high-level language.
See also Example A-37.
dc
The dc (desk calculator) utility is stack-oriented and uses RPN ("Reverse Polish Notation"). Like bc,
it has much of the power of a programming language.
echo "7 8 * p" | dc # 56
# Pushes 7, then 8 onto the stack,
#+ multiplies ("*" operator), then prints the result ("p" operator).
Most persons avoid dc, because of its non-intuitive input and rather cryptic operators. Yet, it has its
uses.
Example 15-51. Converting a decimal number to hexadecimal
#!/bin/bash
# hexconvert.sh: Convert a decimal number to hexadecimal.
E_NOARGS=85 # Command-line arg missing.
BASE=16 # Hexadecimal.
if [ -z "$1" ]
then # Need a command-line argument.
echo "Usage: $0 number"
exit $E_NOARGS
fi # Exercise: add argument validity checking.
hexcvt ()
{
if [ -z "$1" ]
then
echo 0
return # "Return" 0 if no arg passed to function.
fi
echo ""$1" "$BASE" o p" | dc
# o sets radix (numerical base) of output.
# p prints the top of stack.
# For other options: 'man dc' ...
return
}
hexcvt "$1"
exit
Studying the info page for dc is a painful path to understanding its intricacies. There seems to be a
small, select group of dc wizards who delight in showing off their mastery of this powerful, but
arcane utility.
bash$ echo "16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D68736142snlbxq" | dc
Bash
Chapter 15. External Filters, Programs and Commands 294](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-300-320.jpg)
![Advanced Bash-Scripting Guide
dc <<< 10k5v1+2/p # 1.6180339887
# ^^^ Feed operations to dc using a Here String.
# ^^^ Pushes 10 and sets that as the precision (10k).
# ^^ Pushes 5 and takes its square root (5v, v = square root).
# ^^ Pushes 1 and adds it to the running total (1+).
# ^^ Pushes 2 and divides the running total by that (2/).
# ^ Pops and prints the result (p)
# The result is 1.6180339887 ...
# ... which happens to be the Pythagorean Golden Ratio, to 10 places.
Example 15-52. Factoring
#!/bin/bash
# factr.sh: Factor a number
MIN=2 # Will not work for number smaller than this.
E_NOARGS=85
E_TOOSMALL=86
if [ -z $1 ]
then
echo "Usage: $0 number"
exit $E_NOARGS
fi
if [ "$1" -lt "$MIN" ]
then
echo "Number to factor must be $MIN or greater."
exit $E_TOOSMALL
fi
# Exercise: Add type checking (to reject non-integer arg).
echo "Factors of $1:"
# -------------------------------------------------------
echo "$1[p]s2[lip/dli%0=1dvsr]s12sid2%0=13sidvsr[dli%0=
1lrli2+dsi!>.]ds.xd1<2" | dc
# -------------------------------------------------------
# Above code written by Michel Charpentier <charpov@cs.unh.edu>
# (as a one-liner, here broken into two lines for display purposes).
# Used in ABS Guide with permission (thanks!).
exit
# $ sh factr.sh 270138
# 2
# 3
# 11
# 4093
awk
Yet another way of doing floating point math in a script is using awk's built-in math functions in a
shell wrapper.
Example 15-53. Calculating the hypotenuse of a triangle
Chapter 15. External Filters, Programs and Commands 295](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-301-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
# hypotenuse.sh: Returns the "hypotenuse" of a right triangle.
# (square root of sum of squares of the "legs")
ARGS=2 # Script needs sides of triangle passed.
E_BADARGS=85 # Wrong number of arguments.
if [ $# -ne "$ARGS" ] # Test number of arguments to script.
then
echo "Usage: `basename $0` side_1 side_2"
exit $E_BADARGS
fi
AWKSCRIPT=' { printf( "%3.7fn", sqrt($1*$1 + $2*$2) ) } '
# command(s) / parameters passed to awk
# Now, pipe the parameters to awk.
echo -n "Hypotenuse of $1 and $2 = "
echo $1 $2 | awk "$AWKSCRIPT"
# ^^^^^^^^^^^^
# An echo-and-pipe is an easy way of passing shell parameters to awk.
exit
# Exercise: Rewrite this script using 'bc' rather than awk.
# Which method is more intuitive?
15.9. Miscellaneous Commands
Command that fit in no special category
jot, seq
These utilities emit a sequence of integers, with a user-selectable increment.
The default separator character between each integer is a newline, but this can be changed with the -s
option.
bash$ seq 5
1
2
3
4
5
bash$ seq -s : 5
1:2:3:4:5
Both jot and seq come in handy in a for loop.
Example 15-54. Using seq to generate loop arguments
#!/bin/bash
Chapter 15. External Filters, Programs and Commands 296](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-302-320.jpg)
![Advanced Bash-Scripting Guide
# Using "seq"
echo
for a in `seq 80` # or for a in $( seq 80 )
# Same as for a in 1 2 3 4 5 ... 80 (saves much typing!).
# May also use 'jot' (if present on system).
do
echo -n "$a "
done # 1 2 3 4 5 ... 80
# Example of using the output of a command to generate
# the [list] in a "for" loop.
echo; echo
COUNT=80 # Yes, 'seq' also accepts a replaceable parameter.
for a in `seq $COUNT` # or for a in $( seq $COUNT )
do
echo -n "$a "
done # 1 2 3 4 5 ... 80
echo; echo
BEGIN=75
END=80
for a in `seq $BEGIN $END`
# Giving "seq" two arguments starts the count at the first one,
#+ and continues until it reaches the second.
do
echo -n "$a "
done # 75 76 77 78 79 80
echo; echo
BEGIN=45
INTERVAL=5
END=80
for a in `seq $BEGIN $INTERVAL $END`
# Giving "seq" three arguments starts the count at the first one,
#+ uses the second for a step interval,
#+ and continues until it reaches the third.
do
echo -n "$a "
done # 45 50 55 60 65 70 75 80
echo; echo
exit 0
A simpler example:
# Create a set of 10 files,
#+ named file.1, file.2 . . . file.10.
COUNT=10
PREFIX=file
for filename in `seq $COUNT`
do
Chapter 15. External Filters, Programs and Commands 297](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-303-320.jpg)
![Advanced Bash-Scripting Guide
touch $PREFIX.$filename
# Or, can do other operations,
#+ such as rm, grep, etc.
done
Example 15-55. Letter Count"
#!/bin/bash
# letter-count.sh: Counting letter occurrences in a text file.
# Written by Stefano Palmeri.
# Used in ABS Guide with permission.
# Slightly modified by document author.
MINARGS=2 # Script requires at least two arguments.
E_BADARGS=65
FILE=$1
let LETTERS=$#-1 # How many letters specified (as command-line args).
# (Subtract 1 from number of command-line args.)
show_help(){
echo
echo Usage: `basename $0` file letters
echo Note: `basename $0` arguments are case sensitive.
echo Example: `basename $0` foobar.txt G n U L i N U x.
echo
}
# Checks number of arguments.
if [ $# -lt $MINARGS ]; then
echo
echo "Not enough arguments."
echo
show_help
exit $E_BADARGS
fi
# Checks if file exists.
if [ ! -f $FILE ]; then
echo "File "$FILE" does not exist."
exit $E_BADARGS
fi
# Counts letter occurrences .
for n in `seq $LETTERS`; do
shift
if [[ `echo -n "$1" | wc -c` -eq 1 ]]; then # Checks arg.
echo "$1" -> `cat $FILE | tr -cd "$1" | wc -c` # Counting.
else
echo "$1 is not a single char."
fi
done
exit $?
# This script has exactly the same functionality as letter-count2.sh,
#+ but executes faster.
Chapter 15. External Filters, Programs and Commands 298](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-304-320.jpg)
![Advanced Bash-Scripting Guide
# Why?
Somewhat more capable than seq, jot is a classic UNIX utility that is not normally
included in a standard Linux distro. However, the source rpm is available for
download from the MIT repository.
Unlike seq, jot can generate a sequence of random numbers, using the -r option.
bash$ jot -r 3 999
1069
1272
1428
getopt
The getopt command parses command-line options preceded by a dash. This external command
corresponds to the getopts Bash builtin. Using getopt permits handling long options by means of the
-l flag, and this also allows parameter reshuffling.
Example 15-56. Using getopt to parse command-line options
#!/bin/bash
# Using getopt
# Try the following when invoking this script:
# sh ex33a.sh -a
# sh ex33a.sh -abc
# sh ex33a.sh -a -b -c
# sh ex33a.sh -d
# sh ex33a.sh -dXYZ
# sh ex33a.sh -d XYZ
# sh ex33a.sh -abcd
# sh ex33a.sh -abcdZ
# sh ex33a.sh -z
# sh ex33a.sh a
# Explain the results of each of the above.
E_OPTERR=65
if [ "$#" -eq 0 ]
then # Script needs at least one command-line argument.
echo "Usage $0 -[options a,b,c]"
exit $E_OPTERR
fi
set -- `getopt "abcd:" "$@"`
# Sets positional parameters to command-line arguments.
# What happens if you use "$*" instead of "$@"?
while [ ! -z "$1" ]
do
case "$1" in
-a) echo "Option "a"";;
-b) echo "Option "b"";;
-c) echo "Option "c"";;
-d) echo "Option "d" $2";;
*) break;;
esac
Chapter 15. External Filters, Programs and Commands 299](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-305-320.jpg)
![Advanced Bash-Scripting Guide
shift
done
# It is usually better to use the 'getopts' builtin in a script.
# See "ex33.sh."
exit 0
As Peggy Russell points out:
It is often necessary to include an eval to correctly process whitespace and quotes.
args=$(getopt -o a:bc:d -- "$@")
eval set -- "$args"
See Example 9-14 for a simplified emulation of getopt.
run-parts
The run-parts command [73] executes all the scripts in a target directory, sequentially in
ASCII-sorted filename order. Of course, the scripts need to have execute permission.
The cron daemon invokes run-parts to run the scripts in the /etc/cron.* directories.
yes
In its default behavior the yes command feeds a continuous string of the character y followed by a
line feed to stdout. A control-C terminates the run. A different output string may be specified, as
in yes different string, which would continually output different string to
stdout.
One might well ask the purpose of this. From the command-line or in a script, the output of yes can be
redirected or piped into a program expecting user input. In effect, this becomes a sort of poor man's
version of expect.
yes | fsck /dev/hda1 runs fsck non-interactively (careful!).
yes | rm -r dirname has same effect as rm -rf dirname (careful!).
Caution advised when piping yes to a potentially dangerous system command, such as
fsck or fdisk. It might have unintended consequences.
The yes command parses variables, or more accurately, it echoes parsed variables. For
example:
bash$ yes $BASH_VERSION
3.1.17(1)-release
3.1.17(1)-release
3.1.17(1)-release
3.1.17(1)-release
3.1.17(1)-release
. . .
This particular "feature" may be used to create a very large ASCII file on the fly:
bash$ yes $PATH > huge_file.txt
Ctl-C
Chapter 15. External Filters, Programs and Commands 300](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-306-320.jpg)
![Advanced Bash-Scripting Guide
Hit Ctl-C very quickly, or you just might get more than you bargained for. . . .
The yes command may be emulated in a very simple script function.
yes ()
{ # Trivial emulation of "yes" ...
local DEFAULT_TEXT="y"
while [ true ] # Endless loop.
do
if [ -z "$1" ]
then
echo "$DEFAULT_TEXT"
else # If argument ...
echo "$1" # ... expand and echo it.
fi
done # The only things missing are the
} #+ --help and --version options.
banner
Prints arguments as a large vertical banner to stdout, using an ASCII character (default '#'). This
may be redirected to a printer for hardcopy.
Note that banner has been dropped from many Linux distros.
printenv
Show all the environmental variables set for a particular user.
bash$ printenv | grep HOME
HOME=/home/bozo
lp
The lp and lpr commands send file(s) to the print queue, to be printed as hard copy. [74] These
commands trace the origin of their names to the line printers of another era.
bash$ lp file1.txt or bash lp <file1.txt
It is often useful to pipe the formatted output from pr to lp.
bash$ pr -options file1.txt | lp
Formatting packages, such as groff and Ghostscript may send their output directly to lp.
bash$ groff -Tascii file.tr | lp
bash$ gs -options | lp file.ps
Related commands are lpq, for viewing the print queue, and lprm, for removing jobs from the print
queue.
tee
[UNIX borrows an idea from the plumbing trade.]
This is a redirection operator, but with a difference. Like the plumber's tee, it permits "siphoning off"
to a file the output of a command or commands within a pipe, but without affecting the result. This is
useful for printing an ongoing process to a file or paper, perhaps to keep track of it for debugging
purposes.
Chapter 15. External Filters, Programs and Commands 301](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-307-320.jpg)
![Advanced Bash-Scripting Guide
(redirection)
|----> to file
|
==========================|====================
command ---> command ---> |tee ---> command ---> ---> output of pipe
===============================================
cat listfile* | sort | tee check.file | uniq > result.file
# ^^^^^^^^^^^^^^ ^^^^
# The file "check.file" contains the concatenated sorted "listfiles,"
#+ before the duplicate lines are removed by 'uniq.'
mkfifo
This obscure command creates a named pipe, a temporary first-in-first-out buffer for transferring data
between processes. [75] Typically, one process writes to the FIFO, and the other reads from it. See
Example A-14.
#!/bin/bash
# This short script by Omair Eshkenazi.
# Used in ABS Guide with permission (thanks!).
mkfifo pipe1 # Yes, pipes can be given names.
mkfifo pipe2 # Hence the designation "named pipe."
(cut -d' ' -f1 | tr "a-z" "A-Z") >pipe2 <pipe1 &
ls -l | tr -s ' ' | cut -d' ' -f3,9- | tee pipe1 |
cut -d' ' -f2 | paste - pipe2
rm -f pipe1
rm -f pipe2
# No need to kill background processes when script terminates (why not?).
exit $?
Now, invoke the script and explain the output:
sh mkfifo-example.sh
4830.tar.gz BOZO
pipe1 BOZO
pipe2 BOZO
mkfifo-example.sh BOZO
Mixed.msg BOZO
pathchk
This command checks the validity of a filename. If the filename exceeds the maximum allowable
length (255 characters) or one or more of the directories in its path is not searchable, then an error
message results.
Unfortunately, pathchk does not return a recognizable error code, and it is therefore pretty much
useless in a script. Consider instead the file test operators.
dd
This is the somewhat obscure and much feared data duplicator command. Originally a utility for
exchanging data on magnetic tapes between UNIX minicomputers and IBM mainframes, this
command still has its uses. The dd command simply copies a file (or stdin/stdout), but with
conversions. Possible conversions are ASCII/EBCDIC, [76] upper/lower case, swapping of byte pairs
between input and output, and skipping and/or truncating the head or tail of the input file.
Chapter 15. External Filters, Programs and Commands 302](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-308-320.jpg)
![Advanced Bash-Scripting Guide
dd if=kernel-image of=/dev/fd0H1440
Similarly, dd can copy the entire contents of a floppy, even one formatted with a "foreign" OS, to the
hard drive as an image file.
dd if=/dev/fd0 of=/home/bozo/projects/floppy.img
Other applications of dd include initializing temporary swap files (Example 28-2) and ramdisks
(Example 28-3). It can even do a low-level copy of an entire hard drive partition, although this is not
necessarily recommended.
People (with presumably nothing better to do with their time) are constantly thinking of interesting
applications of dd.
Example 15-60. Securely deleting a file
#!/bin/bash
# blot-out.sh: Erase "all" traces of a file.
# This script overwrites a target file alternately
#+ with random bytes, then zeros before finally deleting it.
# After that, even examining the raw disk sectors by conventional methods
#+ will not reveal the original file data.
PASSES=7 # Number of file-shredding passes.
# Increasing this slows script execution,
#+ especially on large target files.
BLOCKSIZE=1 # I/O with /dev/urandom requires unit block size,
#+ otherwise you get weird results.
E_BADARGS=70 # Various error exit codes.
E_NOT_FOUND=71
E_CHANGED_MIND=72
if [ -z "$1" ] # No filename specified.
then
echo "Usage: `basename $0` filename"
exit $E_BADARGS
fi
file=$1
if [ ! -e "$file" ]
then
echo "File "$file" not found."
exit $E_NOT_FOUND
fi
echo; echo -n "Are you absolutely sure you want to blot out "$file" (y/n)? "
read answer
case "$answer" in
[nN]) echo "Changed your mind, huh?"
exit $E_CHANGED_MIND
;;
*) echo "Blotting out file "$file".";;
esac
Chapter 15. External Filters, Programs and Commands 305](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-311-320.jpg)
![Advanced Bash-Scripting Guide
flength=$(ls -l "$file" | awk '{print $5}') # Field 5 is file length.
pass_count=1
chmod u+w "$file" # Allow overwriting/deleting the file.
echo
while [ "$pass_count" -le "$PASSES" ]
do
echo "Pass #$pass_count"
sync # Flush buffers.
dd if=/dev/urandom of=$file bs=$BLOCKSIZE count=$flength
# Fill with random bytes.
sync # Flush buffers again.
dd if=/dev/zero of=$file bs=$BLOCKSIZE count=$flength
# Fill with zeros.
sync # Flush buffers yet again.
let "pass_count += 1"
echo
done
rm -f $file # Finally, delete scrambled and shredded file.
sync # Flush buffers a final time.
echo "File "$file" blotted out and deleted."; echo
exit 0
# This is a fairly secure, if inefficient and slow method
#+ of thoroughly "shredding" a file.
# The "shred" command, part of the GNU "fileutils" package,
#+ does the same thing, although more efficiently.
# The file cannot not be "undeleted" or retrieved by normal methods.
# However . . .
#+ this simple method would *not* likely withstand
#+ sophisticated forensic analysis.
# This script may not play well with a journaled file system.
# Exercise (difficult): Fix it so it does.
# Tom Vier's "wipe" file-deletion package does a much more thorough job
#+ of file shredding than this simple script.
# http://www.ibiblio.org/pub/Linux/utils/file/wipe-2.0.0.tar.bz2
# For an in-depth analysis on the topic of file deletion and security,
#+ see Peter Gutmann's paper,
#+ "Secure Deletion of Data From Magnetic and Solid-State Memory".
# http://www.cs.auckland.ac.nz/~pgut001/pubs/secure_del.html
See also the dd thread entry in the bibliography.
od
The od, or octal dump filter converts input (or files) to octal (base-8) or other bases. This is useful for
viewing or processing binary data files or otherwise unreadable system device files, such as
/dev/urandom, and as a filter for binary data.
Chapter 15. External Filters, Programs and Commands 306](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-312-320.jpg)
![Advanced Bash-Scripting Guide
#+ starting at position 11.
temp_filename=$prefix.$suffix
# Construct the filename.
echo "Temp filename = "$temp_filename""
# sh tempfile-name.sh
# Temp filename = temp.e19ea
# Compare this method of generating "unique" filenames
#+ with the 'date' method in ex51.sh.
exit 0
units
This utility converts between different units of measure. While normally invoked in interactive mode,
units may find use in a script.
Example 15-62. Converting meters to miles
#!/bin/bash
# unit-conversion.sh
convert_units () # Takes as arguments the units to convert.
{
cf=$(units "$1" "$2" | sed --silent -e '1p' | awk '{print $2}')
# Strip off everything except the actual conversion factor.
echo "$cf"
}
Unit1=miles
Unit2=meters
cfactor=`convert_units $Unit1 $Unit2`
quantity=3.73
result=$(echo $quantity*$cfactor | bc)
echo "There are $result $Unit2 in $quantity $Unit1."
# What happens if you pass incompatible units,
#+ such as "acres" and "miles" to the function?
exit 0
m4
A hidden treasure, m4 is a powerful macro [77] processing filter, virtually a complete language.
Although originally written as a pre-processor for RatFor, m4 turned out to be useful as a stand-alone
utility. In fact, m4 combines some of the functionality of eval, tr, and awk, in addition to its extensive
macro expansion facilities.
The April, 2002 issue of Linux Journal has a very nice article on m4 and its uses.
Example 15-63. Using m4
#!/bin/bash
Chapter 15. External Filters, Programs and Commands 308](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-314-320.jpg)
![Advanced Bash-Scripting Guide
# m4.sh: Using the m4 macro processor
# Strings
string=abcdA01
echo "len($string)" | m4 # 7
echo "substr($string,4)" | m4 # A01
echo "regexp($string,[0-1][0-1],&Z)" | m4 # 01Z
# Arithmetic
echo "incr(22)" | m4 # 23
echo "eval(99 / 3)" | m4 # 33
exit
xmessage
This X-based variant of echo pops up a message/query window on the desktop.
xmessage Left click to continue -button okay
zenity
The zenity utility is adept at displaying GTK+ dialog widgets and very suitable for scripting purposes.
doexec
The doexec command enables passing an arbitrary list of arguments to a binary executable. In
particular, passing argv[0] (which corresponds to $0 in a script) lets the executable be invoked by
various names, and it can then carry out different sets of actions, according to the name by which it
was called. What this amounts to is roundabout way of passing options to an executable.
For example, the /usr/local/bin directory might contain a binary called "aaa". Invoking doexec
/usr/local/bin/aaa list would list all those files in the current working directory beginning with an "a",
while invoking (the same executable with) doexec /usr/local/bin/aaa delete would delete those files.
The various behaviors of the executable must be defined within the code of the
executable itself, analogous to something like the following in a shell script:
case `basename $0` in
"name1" ) do_something;;
"name2" ) do_something_else;;
"name3" ) do_yet_another_thing;;
* ) bail_out;;
esac
dialog
The dialog family of tools provide a method of calling interactive "dialog" boxes from a script. The
more elaborate variations of dialog -- gdialog, Xdialog, and kdialog -- actually invoke X-Windows
widgets.
sox
The sox, or "sound exchange" command plays and performs transformations on sound files. In fact,
the /usr/bin/play executable (now deprecated) is nothing but a shell wrapper for sox.
For example, sox soundfile.wav soundfile.au changes a WAV sound file into a (Sun audio format)
AU sound file.
Shell scripts are ideally suited for batch-processing sox operations on sound files. For examples, see
the Linux Radio Timeshift HOWTO and the MP3do Project.
Chapter 15. External Filters, Programs and Commands 309](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-315-320.jpg)
![Chapter 16. System and Administrative Commands
The startup and shutdown scripts in /etc/rc.d illustrate the uses (and usefulness) of many of these
comands. These are usually invoked by root and used for system maintenance or emergency filesystem
repairs. Use with caution, as some of these commands may damage your system if misused.
Users and Groups
users
Show all logged on users. This is the approximate equivalent of who -q.
groups
Lists the current user and the groups she belongs to. This corresponds to the $GROUPS internal
variable, but gives the group names, rather than the numbers.
bash$ groups
bozita cdrom cdwriter audio xgrp
bash$ echo $GROUPS
501
chown, chgrp
The chown command changes the ownership of a file or files. This command is a useful method that
root can use to shift file ownership from one user to another. An ordinary user may not change the
ownership of files, not even her own files. [78]
root# chown bozo *.txt
The chgrp command changes the group ownership of a file or files. You must be owner of the
file(s) as well as a member of the destination group (or root) to use this operation.
chgrp --recursive dunderheads *.data
# The "dunderheads" group will now own all the "*.data" files
#+ all the way down the $PWD directory tree (that's what "recursive" means).
useradd, userdel
The useradd administrative command adds a user account to the system and creates a home directory
for that particular user, if so specified. The corresponding userdel command removes a user account
from the system [79] and deletes associated files.
The adduser command is a synonym for useradd and is usually a symbolic link to it.
usermod
Modify a user account. Changes may be made to the password, group membership, expiration date,
and other attributes of a given user's account. With this command, a user's password may be locked,
which has the effect of disabling the account.
groupmod
Modify a given group. The group name and/or ID number may be changed using this command.
id
The id command lists the real and effective user IDs and the group IDs of the user associated with the
current process. This is the counterpart to the $UID, $EUID, and $GROUPS internal Bash variables.
bash$ id
uid=501(bozo) gid=501(bozo) groups=501(bozo),22(cdrom),80(cdwriter),81(audio)
Chapter 16. System and Administrative Commands 310](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-316-320.jpg)
![Advanced Bash-Scripting Guide
However . . .
bash$ su
Password: ......
bash# whoami
root
bash# logname
bozo
While logname prints the name of the logged in user, whoami gives the name of the
user attached to the current process. As we have just seen, sometimes these are not the
same.
su
Runs a program or script as a substitute user. su rjones starts a shell as user rjones. A naked su
defaults to root. See Example A-14.
sudo
Runs a command as root (or another user). This may be used in a script, thus permitting a regular
user to run the script.
#!/bin/bash
# Some commands.
sudo cp /root/secretfile /home/bozo/secret
# Some more commands.
The file /etc/sudoers holds the names of users permitted to invoke sudo.
passwd
Sets, changes, or manages a user's password.
The passwd command can be used in a script, but probably should not be.
Example 16-1. Setting a new password
#!/bin/bash
# setnew-password.sh: For demonstration purposes only.
# Not a good idea to actually run this script.
# This script must be run as root.
ROOT_UID=0 # Root has $UID 0.
E_WRONG_USER=65 # Not root?
E_NOSUCHUSER=70
SUCCESS=0
if [ "$UID" -ne "$ROOT_UID" ]
then
echo; echo "Only root can run this script."; echo
exit $E_WRONG_USER
else
echo
echo "You should know better than to run this script, root."
echo "Even root users get the blues... "
echo
fi
Chapter 16. System and Administrative Commands 312](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-318-320.jpg)
![Advanced Bash-Scripting Guide
username=bozo
NEWPASSWORD=security_violation
# Check if bozo lives here.
grep -q "$username" /etc/passwd
if [ $? -ne $SUCCESS ]
then
echo "User $username does not exist."
echo "No password changed."
exit $E_NOSUCHUSER
fi
echo "$NEWPASSWORD" | passwd --stdin "$username"
# The '--stdin' option to 'passwd' permits
#+ getting a new password from stdin (or a pipe).
echo; echo "User $username's password changed!"
# Using the 'passwd' command in a script is dangerous.
exit 0
The passwd command's -l, -u, and -d options permit locking, unlocking, and deleting a user's
password. Only root may use these options.
ac
Show users' logged in time, as read from /var/log/wtmp. This is one of the GNU accounting
utilities.
bash$ ac
total 68.08
last
List last logged in users, as read from /var/log/wtmp. This command can also show remote
logins.
For example, to show the last few times the system rebooted:
bash$ last reboot
reboot system boot 2.6.9-1.667 Fri Feb 4 18:18 (00:02)
reboot system boot 2.6.9-1.667 Fri Feb 4 15:20 (01:27)
reboot system boot 2.6.9-1.667 Fri Feb 4 12:56 (00:49)
reboot system boot 2.6.9-1.667 Thu Feb 3 21:08 (02:17)
. . .
wtmp begins Tue Feb 1 12:50:09 2005
newgrp
Change user's group ID without logging out. This permits access to the new group's files. Since users
may be members of multiple groups simultaneously, this command finds only limited use.
Kurt Glaesemann points out that the newgrp command could prove helpful in setting
the default group permissions for files a user writes. However, the chgrp command
might be more convenient for this purpose.
Terminals
tty
Chapter 16. System and Administrative Commands 313](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-319-320.jpg)
![Advanced Bash-Scripting Guide
This command will fail if the user invoking it does not have read permission for the
/var/log/lastlog file.
lsof
List open files. This command outputs a detailed table of all currently open files and gives
information about their owner, size, the processes associated with them, and more. Of course, lsof
may be piped to grep and/or awk to parse and analyze its results.
bash$ lsof
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
init 1 root mem REG 3,5 30748 30303 /sbin/init
init 1 root mem REG 3,5 73120 8069 /lib/ld-2.1.3.so
init 1 root mem REG 3,5 931668 8075 /lib/libc-2.1.3.so
cardmgr 213 root mem REG 3,5 36956 30357 /sbin/cardmgr
...
The lsof command is a useful, if complex administrative tool. If you are unable to dismount a
filesystem and get an error message that it is still in use, then running lsof helps determine which files
are still open on that filesystem. The -i option lists open network socket files, and this can help trace
intrusion or hack attempts.
bash$ lsof -an -i tcp
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
firefox 2330 bozo 32u IPv4 9956 TCP 66.0.118.137:57596->67.112.7.104:http ...
firefox 2330 bozo 38u IPv4 10535 TCP 66.0.118.137:57708->216.79.48.24:http ...
strace
System trace: diagnostic and debugging tool for tracing system calls and signals. This command and
ltrace, following, are useful for diagnosing why a given program or package fails to run . . . perhaps
due to missing libraries or related causes.
bash$ strace df
execve("/bin/df", ["df"], [/* 45 vars */]) = 0
uname({sys="Linux", node="bozo.localdomain", ...}) = 0
brk(0) = 0x804f5e4
...
This is the Linux equivalent of the Solaris truss command.
ltrace
Library trace: diagnostic and debugging tool that traces library calls invoked by a given command.
bash$ ltrace df
__libc_start_main(0x804a910, 1, 0xbfb589a4, 0x804fb70, 0x804fb68 <unfinished ...>:
setlocale(6, "") = "en_US.UTF-8"
bindtextdomain("coreutils", "/usr/share/locale") = "/usr/share/locale"
textdomain("coreutils") = "coreutils"
__cxa_atexit(0x804b650, 0, 0, 0x8052bf0, 0xbfb58908) = 0
getenv("DF_BLOCK_SIZE") = NULL
...
nmap
Network mapper and port scanner. This command scans a server to locate open ports and the services
associated with those ports. It can also report information about packet filters and firewalls. This is an
important security tool for locking down a network against hacking attempts.
Chapter 16. System and Administrative Commands 318](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-324-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
SERVER=$HOST # localhost.localdomain (127.0.0.1).
PORT_NUMBER=25 # SMTP port.
nmap $SERVER | grep -w "$PORT_NUMBER" # Is that particular port open?
# grep -w matches whole words only,
#+ so this wouldn't match port 1025, for example.
exit 0
# 25/tcp open smtp
nc
The nc (netcat) utility is a complete toolkit for connecting to and listening to TCP and UDP ports. It is
useful as a diagnostic and testing tool and as a component in simple script-based HTTP clients and
servers.
bash$ nc localhost.localdomain 25
220 localhost.localdomain ESMTP Sendmail 8.13.1/8.13.1;
Thu, 31 Mar 2005 15:41:35 -0700
Example 16-5. Checking a remote server for identd
#! /bin/sh
## Duplicate DaveG's ident-scan thingie using netcat. Oooh, he'll be p*ssed.
## Args: target port [port port port ...]
## Hose stdout _and_ stderr together.
##
## Advantages: runs slower than ident-scan, giving remote inetd less cause
##+ for alarm, and only hits the few known daemon ports you specify.
## Disadvantages: requires numeric-only port args, the output sleazitude,
##+ and won't work for r-services when coming from high source ports.
# Script author: Hobbit <hobbit@avian.org>
# Used in ABS Guide with permission.
# ---------------------------------------------------
E_BADARGS=65 # Need at least two args.
TWO_WINKS=2 # How long to sleep.
THREE_WINKS=3
IDPORT=113 # Authentication "tap ident" port.
RAND1=999
RAND2=31337
TIMEOUT0=9
TIMEOUT1=8
TIMEOUT2=4
# ---------------------------------------------------
case "${2}" in
"" ) echo "Need HOST and at least one PORT." ; exit $E_BADARGS ;;
esac
# Ping 'em once and see if they *are* running identd.
nc -z -w $TIMEOUT0 "$1" $IDPORT ||
{ echo "Oops, $1 isn't running identd." ; exit 0 ; }
# -z scans for listening daemons.
# -w $TIMEOUT = How long to try to connect.
# Generate a randomish base port.
RP=`expr $$ % $RAND1 + $RAND2`
Chapter 16. System and Administrative Commands 319](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-325-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
# fileinfo2.sh
# Per suggestion of Joël Bourquard and . . .
# http://www.linuxquestions.org/questions/showthread.php?t=410766
FILENAME=testfile.txt
file_name=$(stat -c%n "$FILENAME") # Same as "$FILENAME" of course.
file_owner=$(stat -c%U "$FILENAME")
file_size=$(stat -c%s "$FILENAME")
# Certainly easier than using "ls -l $FILENAME"
#+ and then parsing with sed.
file_inode=$(stat -c%i "$FILENAME")
file_type=$(stat -c%F "$FILENAME")
file_access_rights=$(stat -c%A "$FILENAME")
echo "File name: $file_name"
echo "File owner: $file_owner"
echo "File size: $file_size"
echo "File inode: $file_inode"
echo "File type: $file_type"
echo "File access rights: $file_access_rights"
exit 0
sh fileinfo2.sh
File name: testfile.txt
File owner: bozo
File size: 418
File inode: 1730378
File type: regular file
File access rights: -rw-rw-r--
vmstat
Display virtual memory statistics.
bash$ vmstat
procs memory swap io system cpu
r b w swpd free buff cache si so bi bo in cs us sy id
0 0 0 0 11040 2636 38952 0 0 33 7 271 88 8 3 89
netstat
Show current network statistics and information, such as routing tables and active connections. This
utility accesses information in /proc/net (Chapter 27). See Example 27-4.
netstat -r is equivalent to route.
bash$ netstat
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags Type State I-Node Path
unix 11 [ ] DGRAM 906 /dev/log
unix 3 [ ] STREAM CONNECTED 4514 /tmp/.X11-unix/X0
unix 3 [ ] STREAM CONNECTED 4513
. . .
Chapter 16. System and Administrative Commands 322](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-328-320.jpg)
![Advanced Bash-Scripting Guide
bash$ sar
Linux 2.4.9 (brooks.seringas.fr) 09/26/03
10:30:00 CPU %user %nice %system %iowait %idle
10:40:00 all 2.21 10.90 65.48 0.00 21.41
10:50:00 all 3.36 0.00 72.36 0.00 24.28
11:00:00 all 1.12 0.00 80.77 0.00 18.11
Average: all 2.23 3.63 72.87 0.00 21.27
14:32:30 LINUX RESTART
15:00:00 CPU %user %nice %system %iowait %idle
15:10:00 all 8.59 2.40 17.47 0.00 71.54
15:20:00 all 4.07 1.00 11.95 0.00 82.98
15:30:00 all 0.79 2.94 7.56 0.00 88.71
Average: all 6.33 1.70 14.71 0.00 77.26
readelf
Show information and statistics about a designated elf binary. This is part of the binutils package.
bash$ readelf -h /bin/bash
ELF Header:
Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00
Class: ELF32
Data: 2's complement, little endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: EXEC (Executable file)
. . .
size
The size [/path/to/binary] command gives the segment sizes of a binary executable or archive file.
This is mainly of use to programmers.
bash$ size /bin/bash
text data bss dec hex filename
495971 22496 17392 535859 82d33 /bin/bash
System Logs
logger
Appends a user-generated message to the system log (/var/log/messages). You do not have to
be root to invoke logger.
logger Experiencing instability in network connection at 23:10, 05/21.
# Now, do a 'tail /var/log/messages'.
By embedding a logger command in a script, it is possible to write debugging information to
/var/log/messages.
logger -t $0 -i Logging at line "$LINENO".
# The "-t" option specifies the tag for the logger entry.
# The "-i" option records the process ID.
# tail /var/log/message
# ...
# Jul 7 20:48:58 localhost ./test.sh[1712]: Logging at line 3.
Chapter 16. System and Administrative Commands 324](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-330-320.jpg)
![Advanced Bash-Scripting Guide
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND
848 bozo 17 0 996 996 800 R 5.6 1.2 0:00 top
1 root 8 0 512 512 444 S 0.0 0.6 0:04 init
2 root 9 0 0 0 0 SW 0.0 0.0 0:00 keventd
...
nice
Run a background job with an altered priority. Priorities run from 19 (lowest) to -20 (highest). Only
root may set the negative (higher) priorities. Related commands are renice and snice, which change
the priority of a running process or processes, and skill, which sends a kill signal to a process or
processes.
nohup
Keeps a command running even after user logs off. The command will run as a foreground process
unless followed by &. If you use nohup within a script, consider coupling it with a wait to avoid
creating an orphan or zombie process.
pidof
Identifies process ID (PID) of a running job. Since job control commands, such as kill and renice act
on the PID of a process (not its name), it is sometimes necessary to identify that PID. The pidof
command is the approximate counterpart to the $PPID internal variable.
bash$ pidof xclock
880
Example 16-6. pidof helps kill a process
#!/bin/bash
# kill-process.sh
NOPROCESS=2
process=xxxyyyzzz # Use nonexistent process.
# For demo purposes only...
# ... don't want to actually kill any actual process with this script.
#
# If, for example, you wanted to use this script to logoff the Internet,
# process=pppd
t=`pidof $process` # Find pid (process id) of $process.
# The pid is needed by 'kill' (can't 'kill' by program name).
if [ -z "$t" ] # If process not present, 'pidof' returns null.
then
echo "Process $process was not running."
echo "Nothing killed."
exit $NOPROCESS
fi
kill $t # May need 'kill -9' for stubborn process.
# Need a check here to see if process allowed itself to be killed.
# Perhaps another " t=`pidof $process` " or ...
# This entire script could be replaced by
# kill $(pidof -x process_name)
Chapter 16. System and Administrative Commands 326](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-332-320.jpg)
![Advanced Bash-Scripting Guide
Process Control and Booting
init
The init command is the parent of all processes. Called in the final step of a bootup, init determines
the runlevel of the system from /etc/inittab. Invoked by its alias telinit, and by root only.
telinit
Symlinked to init, this is a means of changing the system runlevel, usually done for system
maintenance or emergency filesystem repairs. Invoked only by root. This command can be dangerous
-- be certain you understand it well before using!
runlevel
Shows the current and last runlevel, that is, whether the system is halted (runlevel 0), in single-user
mode (1), in multi-user mode (2 or 3), in X Windows (5), or rebooting (6). This command accesses
the /var/run/utmp file.
halt, shutdown, reboot
Command set to shut the system down, usually just prior to a power down.
On some Linux distros, the halt command has 755 permissions, so it can be invoked
by a non-root user. A careless halt in a terminal or a script may shut down the system!
service
Starts or stops a system service. The startup scripts in /etc/init.d and /etc/rc.d use this
command to start services at bootup.
root# /sbin/service iptables stop
Flushing firewall rules: [ OK ]
Setting chains to policy ACCEPT: filter [ OK ]
Unloading iptables modules: [ OK ]
Network
ifconfig
Network interface configuration and tuning utility.
bash$ ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:700 (700.0 b) TX bytes:700 (700.0 b)
The ifconfig command is most often used at bootup to set up the interfaces, or to shut them down
when rebooting.
# Code snippets from /etc/rc.d/init.d/network
# ...
# Check that networking is up.
[ ${NETWORKING} = "no" ] && exit 0
[ -x /sbin/ifconfig ] || exit 0
Chapter 16. System and Administrative Commands 328](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-334-320.jpg)
![Advanced Bash-Scripting Guide
# ...
for i in $interfaces ; do
if ifconfig $i 2>/dev/null | grep -q "UP" >/dev/null 2>&1 ; then
action "Shutting down interface $i: " ./ifdown $i boot
fi
# The GNU-specific "-q" option to "grep" means "quiet", i.e.,
#+ producing no output.
# Redirecting output to /dev/null is therefore not strictly necessary.
# ...
echo "Currently active devices:"
echo `/sbin/ifconfig | grep ^[a-z] | awk '{print $1}'`
# ^^^^^ should be quoted to prevent globbing.
# The following also work.
# echo $(/sbin/ifconfig | awk '/^[a-z]/ { print $1 })'
# echo $(/sbin/ifconfig | sed -e 's/ .*//')
# Thanks, S.C., for additional comments.
See also Example 29-6.
iwconfig
This is the command set for configuring a wireless network. It is the wireless equivalent of ifconfig,
above.
ip
General purpose utility for setting up, changing, and analyzing IP (Internet Protocol) networks and
attached devices. This command is part of the iproute2 package.
bash$ ip link show
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:d0:59:ce:af:da brd ff:ff:ff:ff:ff:ff
3: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
bash$ ip route list
169.254.0.0/16 dev lo scope link
Or, in a script:
#!/bin/bash
# Script by Juan Nicolas Ruiz
# Used with his kind permission.
# Setting up (and stopping) a GRE tunnel.
# --- start-tunnel.sh ---
LOCAL_IP="192.168.1.17"
REMOTE_IP="10.0.5.33"
OTHER_IFACE="192.168.0.100"
REMOTE_NET="192.168.3.0/24"
/sbin/ip tunnel add netb mode gre remote $REMOTE_IP
local $LOCAL_IP ttl 255
/sbin/ip addr add $OTHER_IFACE dev netb
/sbin/ip link set netb up
Chapter 16. System and Administrative Commands 329](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-335-320.jpg)
![Advanced Bash-Scripting Guide
to get everything mounted.
mount -t iso9660 /dev/cdrom /mnt/cdrom
# Mounts CD ROM. ISO 9660 is a standard CD ROM filesystem.
mount /mnt/cdrom
# Shortcut, if /mnt/cdrom listed in /etc/fstab
The versatile mount command can even mount an ordinary file on a block device, and the file will act
as if it were a filesystem. Mount accomplishes that by associating the file with a loopback device. One
application of this is to mount and examine an ISO9660 filesystem image before burning it onto a
CDR. [80]
Example 16-7. Checking a CD image
# As root...
mkdir /mnt/cdtest # Prepare a mount point, if not already there.
mount -r -t iso9660 -o loop cd-image.iso /mnt/cdtest # Mount the image.
# "-o loop" option equivalent to "losetup /dev/loop0"
cd /mnt/cdtest # Now, check the image.
ls -alR # List the files in the directory tree there.
# And so forth.
umount
Unmount a currently mounted filesystem. Before physically removing a previously mounted floppy or
CDROM disk, the device must be umounted, else filesystem corruption may result.
umount /mnt/cdrom
# You may now press the eject button and safely remove the disk.
The automount utility, if properly installed, can mount and unmount floppies or
CDROM disks as they are accessed or removed. On "multispindle" laptops with
swappable floppy and optical drives, this can cause problems, however.
gnome-mount
The newer Linux distros have deprecated mount and umount. The successor, for command-line
mounting of removable storage devices, is gnome-mount. It can take the -d option to mount a device
file by its listing in /dev.
For example, to mount a USB flash drive:
bash$ gnome-mount -d /dev/sda1
gnome-mount 0.4
bash$ df
. . .
/dev/sda1 63584 12034 51550 19% /media/disk
sync
Forces an immediate write of all updated data from buffers to hard drive (synchronize drive with
buffers). While not strictly necessary, a sync assures the sys admin or user that the data just changed
will survive a sudden power failure. In the olden days, a sync; sync (twice, just to make
absolutely sure) was a useful precautionary measure before a system reboot.
Chapter 16. System and Administrative Commands 331](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-337-320.jpg)
![Advanced Bash-Scripting Guide
At times, you may wish to force an immediate buffer flush, as when securely deleting a file (see
Example 15-60) or when the lights begin to flicker.
losetup
Sets up and configures loopback devices.
Example 16-8. Creating a filesystem in a file
SIZE=1000000 # 1 meg
head -c $SIZE < /dev/zero > file # Set up file of designated size.
losetup /dev/loop0 file # Set it up as loopback device.
mke2fs /dev/loop0 # Create filesystem.
mount -o loop /dev/loop0 /mnt # Mount it.
# Thanks, S.C.
mkswap
Creates a swap partition or file. The swap area must subsequently be enabled with swapon.
swapon, swapoff
Enable / disable swap partitition or file. These commands usually take effect at bootup and shutdown.
mke2fs
Create a Linux ext2 filesystem. This command must be invoked as root.
Example 16-9. Adding a new hard drive
#!/bin/bash
# Adding a second hard drive to system.
# Software configuration. Assumes hardware already mounted.
# From an article by the author of the ABS Guide.
# In issue #38 of _Linux Gazette_, http://www.linuxgazette.com.
ROOT_UID=0 # This script must be run as root.
E_NOTROOT=67 # Non-root exit error.
if [ "$UID" -ne "$ROOT_UID" ]
then
echo "Must be root to run this script."
exit $E_NOTROOT
fi
# Use with extreme caution!
# If something goes wrong, you may wipe out your current filesystem.
NEWDISK=/dev/hdb # Assumes /dev/hdb vacant. Check!
MOUNTPOINT=/mnt/newdisk # Or choose another mount point.
fdisk $NEWDISK
mke2fs -cv $NEWDISK1 # Check for bad blocks (verbose output).
# Note: ^ /dev/hdb1, *not* /dev/hdb!
mkdir $MOUNTPOINT
chmod 777 $MOUNTPOINT # Makes new drive accessible to all users.
# Now, test ...
Chapter 16. System and Administrative Commands 332](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-338-320.jpg)
![Advanced Bash-Scripting Guide
# mount -t ext2 /dev/hdb1 /mnt/newdisk
# Try creating a directory.
# If it works, umount it, and proceed.
# Final step:
# Add the following line to /etc/fstab.
# /dev/hdb1 /mnt/newdisk ext2 defaults 1 1
exit
See also Example 16-8 and Example 28-3.
tune2fs
Tune ext2 filesystem. May be used to change filesystem parameters, such as maximum mount count.
This must be invoked as root.
This is an extremely dangerous command. Use it at your own risk, as you may
inadvertently destroy your filesystem.
dumpe2fs
Dump (list to stdout) very verbose filesystem info. This must be invoked as root.
root# dumpe2fs /dev/hda7 | grep 'ount count'
dumpe2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
Mount count: 6
Maximum mount count: 20
hdparm
List or change hard disk parameters. This command must be invoked as root, and it may be dangerous
if misused.
fdisk
Create or change a partition table on a storage device, usually a hard drive. This command must be
invoked as root.
Use this command with extreme caution. If something goes wrong, you may destroy
an existing filesystem.
fsck, e2fsck, debugfs
Filesystem check, repair, and debug command set.
fsck: a front end for checking a UNIX filesystem (may invoke other utilities). The actual filesystem
type generally defaults to ext2.
e2fsck: ext2 filesystem checker.
debugfs: ext2 filesystem debugger. One of the uses of this versatile, but dangerous command is to
(attempt to) recover deleted files. For advanced users only!
All of these should be invoked as root, and they can damage or destroy a filesystem if
misused.
badblocks
Checks for bad blocks (physical media flaws) on a storage device. This command finds use when
formatting a newly installed hard drive or testing the integrity of backup media. [81] As an example,
badblocks /dev/fd0 tests a floppy disk.
The badblocks command may be invoked destructively (overwrite all data) or in non-destructive
read-only mode. If root user owns the device to be tested, as is generally the case, then root must
Chapter 16. System and Administrative Commands 333](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-339-320.jpg)
![Advanced Bash-Scripting Guide
~/.bashrc effectively restricts which portion of the filesystem she may run command "XX" on.
The chroot command is also handy when running from an emergency boot floppy (chroot to
/dev/fd0), or as an option to lilo when recovering from a system crash. Other uses include
installation from a different filesystem (an rpm option) or running a readonly filesystem from a CD
ROM. Invoke only as root, and use with care.
It might be necessary to copy certain system files to a chrooted directory, since the
normal $PATH can no longer be relied upon.
lockfile
This utility is part of the procmail package (www.procmail.org). It creates a lock file, a semaphore
that controls access to a file, device, or resource.
Definition: A semaphore is a flag or signal. (The usage originated in railroading, where a
colored flag, lantern, or striped movable arm semaphore indicated whether a particular track was in
use and therefore unavailable for another train.) A UNIX process can check the appropriate
semaphore to determine whether a particular resource is available/accessible.
The lock file serves as a flag that this particular file, device, or resource is in use by a process (and is
therefore "busy"). The presence of a lock file permits only restricted access (or no access) to other
processes.
lockfile /home/bozo/lockfiles/$0.lock
# Creates a write-protected lockfile prefixed with the name of the script.
lockfile /home/bozo/lockfiles/${0##*/}.lock
# A safer version of the above, as pointed out by E. Choroba.
Lock files are used in such applications as protecting system mail folders from simultaneously being
changed by multiple users, indicating that a modem port is being accessed, and showing that an
instance of Firefox is using its cache. Scripts may check for the existence of a lock file created by a
certain process to check if that process is running. Note that if a script attempts to create a lock file
that already exists, the script will likely hang.
Normally, applications create and check for lock files in the /var/lock directory. [82] A script can
test for the presence of a lock file by something like the following.
appname=xyzip
# Application "xyzip" created lock file "/var/lock/xyzip.lock".
if [ -e "/var/lock/$appname.lock" ]
then #+ Prevent other programs & scripts
# from accessing files/resources used by xyzip.
...
flock
Much less useful than the lockfile command is flock. It sets an "advisory" lock on a file and then
executes a command while the lock is on. This is to prevent any other process from setting a lock on
that file until completion of the specified command.
flock $0 cat $0 > lockfile__$0
# Set a lock on the script the above line appears in,
#+ while listing the script to stdout.
Chapter 16. System and Administrative Commands 335](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-341-320.jpg)
![Advanced Bash-Scripting Guide
Unlike lockfile, flock does not automatically create a lock file.
mknod
Creates block or character device files (may be necessary when installing new hardware on the
system). The MAKEDEV utility has virtually all of the functionality of mknod, and is easier to use.
MAKEDEV
Utility for creating device files. It must be run as root, and in the /dev directory. It is a sort of
advanced version of mknod.
tmpwatch
Automatically deletes files which have not been accessed within a specified period of time. Usually
invoked by cron to remove stale log files.
Backup
dump, restore
The dump command is an elaborate filesystem backup utility, generally used on larger installations
and networks. [83] It reads raw disk partitions and writes a backup file in a binary format. Files to be
backed up may be saved to a variety of storage media, including disks and tape drives. The restore
command restores backups made with dump.
fdformat
Perform a low-level format on a floppy disk (/dev/fd0*).
System Resources
ulimit
Sets an upper limit on use of system resources. Usually invoked with the -f option, which sets a limit
on file size (ulimit -f 1000 limits files to 1 meg maximum). [84] The -t option limits the coredump
size (ulimit -c 0 eliminates coredumps). Normally, the value of ulimit would be set in
/etc/profile and/or ~/.bash_profile (see Appendix G).
Judicious use of ulimit can protect a system against the dreaded fork bomb.
#!/bin/bash
# This script is for illustrative purposes only.
# Run it at your own peril -- it WILL freeze your system.
while true # Endless loop.
do
$0 & # This script invokes itself . . .
#+ forks an infinite number of times . . .
#+ until the system freezes up because all resources exhausted.
done # This is the notorious "sorcerer's appentice" scenario.
exit 0 # Will not exit here, because this script will never terminate.
A ulimit -Hu XX (where XX is the user process limit) in /etc/profile would abort this
script when it exceeded the preset limit.
quota
Display user or group disk quotas.
setquota
Set user or group disk quotas from the command-line.
umask
User file creation permissions mask. Limit the default file attributes for a particular user. All files
created by that user take on the attributes specified by umask. The (octal) value passed to umask
Chapter 16. System and Administrative Commands 336](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-342-320.jpg)
![Advanced Bash-Scripting Guide
defines the file permissions disabled. For example, umask 022 ensures that new files will have at
most 755 permissions (777 NAND 022). [85] Of course, the user may later change the attributes of
particular files with chmod. The usual practice is to set the value of umask in /etc/profile
and/or ~/.bash_profile (see Appendix G).
Example 16-10. Using umask to hide an output file from prying eyes
#!/bin/bash
# rot13a.sh: Same as "rot13.sh" script, but writes output to "secure" file.
# Usage: ./rot13a.sh filename
# or ./rot13a.sh <filename
# or ./rot13a.sh and supply keyboard input (stdin)
umask 177 # File creation mask.
# Files created by this script
#+ will have 600 permissions.
OUTFILE=decrypted.txt # Results output to file "decrypted.txt"
#+ which can only be read/written
# by invoker of script (or root).
cat "$@" | tr 'a-zA-Z' 'n-za-mN-ZA-M' > $OUTFILE
# ^^ Input from stdin or a file. ^^^^^^^^^^ Output redirected to file.
exit 0
rdev
Get info about or make changes to root device, swap space, or video mode. The functionality of rdev
has generally been taken over by lilo, but rdev remains useful for setting up a ram disk. This is a
dangerous command, if misused.
Modules
lsmod
List installed kernel modules.
bash$ lsmod
Module Size Used by
autofs 9456 2 (autoclean)
opl3 11376 0
serial_cs 5456 0 (unused)
sb 34752 0
uart401 6384 0 [sb]
sound 58368 0 [opl3 sb uart401]
soundlow 464 0 [sound]
soundcore 2800 6 [sb sound]
ds 6448 2 [serial_cs]
i82365 22928 2
pcmcia_core 45984 0 [serial_cs ds i82365]
Doing a cat /proc/modules gives the same information.
insmod
Force installation of a kernel module (use modprobe instead, when possible). Must be invoked as
root.
Chapter 16. System and Administrative Commands 337](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-343-320.jpg)
![Advanced Bash-Scripting Guide
rmmod
Force unloading of a kernel module. Must be invoked as root.
modprobe
Module loader that is normally invoked automatically in a startup script. Must be invoked as root.
depmod
Creates module dependency file. Usually invoked from a startup script.
modinfo
Output information about a loadable module.
bash$ modinfo hid
filename: /lib/modules/2.4.20-6/kernel/drivers/usb/hid.o
description: "USB HID support drivers"
author: "Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>"
license: "GPL"
Miscellaneous
env
Runs a program or script with certain environmental variables set or changed (without changing the
overall system environment). The [varname=xxx] permits changing the environmental variable
varname for the duration of the script. With no options specified, this command lists all the
environmental variable settings. [86]
The first line of a script (the "sha-bang" line) may use env when the path to the shell
or interpreter is unknown.
#! /usr/bin/env perl
print "This Perl script will run,n";
print "even when I don't know where to find Perl.n";
# Good for portable cross-platform scripts,
# where the Perl binaries may not be in the expected place.
# Thanks, S.C.
Or even ...
#!/bin/env bash
# Queries the $PATH enviromental variable for the location of bash.
# Therefore ...
# This script will run where Bash is not in its usual place, in /bin.
...
ldd
Show shared lib dependencies for an executable file.
bash$ ldd /bin/ls
libc.so.6 => /lib/libc.so.6 (0x4000c000)
/lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x80000000)
watch
Run a command repeatedly, at specified time intervals.
The default is two-second intervals, but this may be changed with the -n option.
Chapter 16. System and Administrative Commands 338](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-344-320.jpg)
![Advanced Bash-Scripting Guide
watch -n 5 tail /var/log/messages
# Shows tail end of system log, /var/log/messages, every five seconds.
Unfortunately, piping the output of watch command to grep does not work.
strip
Remove the debugging symbolic references from an executable binary. This decreases its size, but
makes debugging it impossible.
This command often occurs in a Makefile, but rarely in a shell script.
nm
List symbols in an unstripped compiled binary.
rdist
Remote distribution client: synchronizes, clones, or backs up a file system on a remote server.
16.1. Analyzing a System Script
Using our knowledge of administrative commands, let us examine a system script. One of the shortest and
simplest to understand scripts is "killall," [87] used to suspend running processes at system shutdown.
Example 16-11. killall, from /etc/rc.d/init.d
#!/bin/sh
# --> Comments added by the author of this document marked by "# -->".
# --> This is part of the 'rc' script package
# --> by Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>.
# --> This particular script seems to be Red Hat / FC specific
# --> (may not be present in other distributions).
# Bring down all unneeded services that are still running
#+ (there shouldn't be any, so this is just a sanity check)
for i in /var/lock/subsys/*; do
# --> Standard for/in loop, but since "do" is on same line,
# --> it is necessary to add ";".
# Check if the script is there.
[ ! -f $i ] && continue
# --> This is a clever use of an "and list", equivalent to:
# --> if [ ! -f "$i" ]; then continue
# Get the subsystem name.
subsys=${i#/var/lock/subsys/}
# --> Match variable name, which, in this case, is the file name.
# --> This is the exact equivalent of subsys=`basename $i`.
# --> It gets it from the lock file name
# -->+ (if there is a lock file,
# -->+ that's proof the process has been running).
# --> See the "lockfile" entry, above.
# Bring the subsystem down.
Chapter 16. System and Administrative Commands 339](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-345-320.jpg)
![Advanced Bash-Scripting Guide
if [ -f /etc/rc.d/init.d/$subsys.init ]; then
/etc/rc.d/init.d/$subsys.init stop
else
/etc/rc.d/init.d/$subsys stop
# --> Suspend running jobs and daemons.
# --> Note that "stop" is a positional parameter,
# -->+ not a shell builtin.
fi
done
That wasn't so bad. Aside from a little fancy footwork with variable matching, there is no new material there.
Exercise 1. In /etc/rc.d/init.d, analyze the halt script. It is a bit longer than killall, but similar in
concept. Make a copy of this script somewhere in your home directory and experiment with it (do not run it as
root). Do a simulated run with the -vn flags (sh -vn scriptname). Add extensive comments. Change
the "action" commands to "echos".
Exercise 2. Look at some of the more complex scripts in /etc/rc.d/init.d. See if you can understand
parts of them. Follow the above procedure to analyze them. For some additional insight, you might also
examine the file sysvinitfiles in /usr/share/doc/initscripts-?.??, which is part of the
"initscripts" documentation.
Chapter 16. System and Administrative Commands 340](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-346-320.jpg)
![Chapter 17. Regular Expressions
. . . the intellectual activity associated with
software development is largely one of gaining
insight.
--Stowe Boyd
To fully utilize the power of shell scripting, you need to master Regular Expressions. Certain commands and
utilities commonly used in scripts, such as grep, expr, sed and awk, interpret and use REs. As of version 3,
Bash has acquired its own RE-match operator: =~.
17.1. A Brief Introduction to Regular Expressions
An expression is a string of characters. Those characters having an interpretation above and beyond their
literal meaning are called metacharacters. A quote symbol, for example, may denote speech by a person,
ditto, or a meta-meaning [88] for the symbols that follow. Regular Expressions are sets of characters and/or
metacharacters that match (or specify) patterns.
A Regular Expression contains one or more of the following:
• A character set. These are the characters retaining their literal meaning. The simplest type of Regular
Expression consists only of a character set, with no metacharacters.
•
An anchor. These designate (anchor) the position in the line of text that the RE is to match. For
example, ^, and $ are anchors.
• Modifiers. These expand or narrow (modify) the range of text the RE is to match. Modifiers include
the asterisk, brackets, and the backslash.
The main uses for Regular Expressions (REs) are text searches and string manipulation. An RE matches a
single character or a set of characters -- a string or a part of a string.
• The asterisk -- * -- matches any number of repeats of the character string or RE preceding it,
including zero instances.
"1133*" matches 11 + one or more 3's: 113, 1133, 1133333, and so forth.
• The dot -- . -- matches any one character, except a newline. [89]
"13." matches 13 + at least one of any character (including a space):
1133, 11333, but not 13 (additional character missing).
See Example 15-18 for a demonstration of dot single-character matching.
• The caret -- ^ -- matches the beginning of a line, but sometimes, depending on context, negates the
meaning of a set of characters in an RE.
•
The dollar sign -- $ -- at the end of an RE matches the end of a line.
"XXX$" matches XXX at the end of a line.
Chapter 17. Regular Expressions 343](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-349-320.jpg)
![Advanced Bash-Scripting Guide
"^$" matches blank lines.
•
Brackets -- [...] -- enclose a set of characters to match in a single RE.
"[xyz]" matches any one of the characters x, y, or z.
"[c-n]" matches any one of the characters in the range c to n.
"[B-Pk-y]" matches any one of the characters in the ranges B to P and k to y.
"[a-z0-9]" matches any single lowercase letter or any digit.
"[^b-d]" matches any character except those in the range b to d. This is an instance of ^ negating or
inverting the meaning of the following RE (taking on a role similar to ! in a different context).
Combined sequences of bracketed characters match common word patterns. "[Yy][Ee][Ss]" matches
yes, Yes, YES, yEs, and so forth. "[0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9][0-9][0-9]" matches any
Social Security number.
•
The backslash -- -- escapes a special character, which means that character gets interpreted literally
(and is therefore no longer special).
A "$" reverts back to its literal meaning of "$", rather than its RE meaning of end-of-line. Likewise a
"" has the literal meaning of "".
•
Escaped "angle brackets" -- <...> -- mark word boundaries.
The angle brackets must be escaped, since otherwise they have only their literal character meaning.
"<the>" matches the word "the," but not the words "them," "there," "other," etc.
bash$ cat textfile
This is line 1, of which there is only one instance.
This is the only instance of line 2.
This is line 3, another line.
This is line 4.
bash$ grep 'the' textfile
This is line 1, of which there is only one instance.
This is the only instance of line 2.
This is line 3, another line.
bash$ grep '<the>' textfile
This is the only instance of line 2.
The only way to be certain that a particular RE works is to test it.
TEST FILE: tstfile # No match.
# No match.
Chapter 17. Regular Expressions 344](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-350-320.jpg)
![Advanced Bash-Scripting Guide
Run grep "1133*" on this file. # Match.
# No match.
# No match.
This line contains the number 113. # Match.
This line contains the number 13. # No match.
This line contains the number 133. # No match.
This line contains the number 1133. # Match.
This line contains the number 113312. # Match.
This line contains the number 1112. # No match.
This line contains the number 113312312. # Match.
This line contains no numbers at all. # No match.
bash$ grep "1133*" tstfile
Run grep "1133*" on this file. # Match.
This line contains the number 113. # Match.
This line contains the number 1133. # Match.
This line contains the number 113312. # Match.
This line contains the number 113312312. # Match.
• Extended REs. Additional metacharacters added to the basic set. Used in egrep, awk, and Perl.
•
The question mark -- ? -- matches zero or one of the previous RE. It is generally used for matching
single characters.
•
The plus -- + -- matches one or more of the previous RE. It serves a role similar to the *, but does not
match zero occurrences.
# GNU versions of sed and awk can use "+",
# but it needs to be escaped.
echo a111b | sed -ne '/a1+b/p'
echo a111b | grep 'a1+b'
echo a111b | gawk '/a1+b/'
# All of above are equivalent.
# Thanks, S.C.
• Escaped "curly brackets" -- { } -- indicate the number of occurrences of a preceding RE to match.
It is necessary to escape the curly brackets since they have only their literal character meaning
otherwise. This usage is technically not part of the basic RE set.
"[0-9]{5}" matches exactly five digits (characters in the range of 0 to 9).
Curly brackets are not available as an RE in the "classic" (non-POSIX compliant)
version of awk. However, the GNU extended version of awk, gawk, has the
--re-interval option that permits them (without being escaped).
bash$ echo 2222 | gawk --re-interval '/2{3}/'
2222
Perl and some egrep versions do not require escaping the curly brackets.
•
Parentheses -- ( ) -- enclose a group of REs. They are useful with the following "|" operator and in
substring extraction using expr.
Chapter 17. Regular Expressions 345](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-351-320.jpg)
![Advanced Bash-Scripting Guide
• The -- | -- "or" RE operator matches any of a set of alternate characters.
bash$ egrep 're(a|e)d' misc.txt
People who read seem to be better informed than those who do not.
The clarinet produces sound by the vibration of its reed.
Some versions of sed, ed, and ex support escaped versions of the extended Regular Expressions
described above, as do the GNU utilities.
• POSIX Character Classes. [:class:]
This is an alternate method of specifying a range of characters to match.
• [:alnum:] matches alphabetic or numeric characters. This is equivalent to A-Za-z0-9.
• [:alpha:] matches alphabetic characters. This is equivalent to A-Za-z.
• [:blank:] matches a space or a tab.
• [:cntrl:] matches control characters.
• [:digit:] matches (decimal) digits. This is equivalent to 0-9.
• [:graph:] (graphic printable characters). Matches characters in the range of ASCII 33 - 126. This
is the same as [:print:], below, but excluding the space character.
• [:lower:] matches lowercase alphabetic characters. This is equivalent to a-z.
• [:print:] (printable characters). Matches characters in the range of ASCII 32 - 126. This is the
same as [:graph:], above, but adding the space character.
• [:space:] matches whitespace characters (space and horizontal tab).
• [:upper:] matches uppercase alphabetic characters. This is equivalent to A-Z.
• [:xdigit:] matches hexadecimal digits. This is equivalent to 0-9A-Fa-f.
POSIX character classes generally require quoting or double brackets ([[ ]]).
bash$ grep [[:digit:]] test.file
abc=723
# ...
if [[ $arow =~ [[:digit:]] ]] # Numerical input?
then # POSIX char class
if [[ $acol =~ [[:alpha:]] ]] # Number followed by a letter? Illegal!
# ...
# From ktour.sh example script.
These character classes may even be used with globbing, to a limited extent.
bash$ ls -l ?[[:digit:]][[:digit:]]?
-rw-rw-r-- 1 bozo bozo 0 Aug 21 14:47 a33b
POSIX character classes are used in Example 15-21 and Example 15-22.
Sed, awk, and Perl, used as filters in scripts, take REs as arguments when "sifting" or transforming files or I/O
streams. See Example A-12 and Example A-16 for illustrations of this.
The standard reference on this complex topic is Friedl's Mastering Regular Expressions. Sed & Awk, by
Dougherty and Robbins, also gives a very lucid treatment of REs. See the Bibliography for more information
on these books.
Chapter 17. Regular Expressions 346](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-352-320.jpg)
![Advanced Bash-Scripting Guide
17.2. Globbing
Bash itself cannot recognize Regular Expressions. Inside scripts, it is commands and utilities -- such as sed
and awk -- that interpret RE's.
Bash does carry out filename expansion [90] -- a process known as globbing -- but this does not use the
standard RE set. Instead, globbing recognizes and expands wild cards. Globbing interprets the standard wild
card characters [91] -- * and ?, character lists in square brackets, and certain other special characters (such as ^
for negating the sense of a match). There are important limitations on wild card characters in globbing,
however. Strings containing * will not match filenames that start with a dot, as, for example, .bashrc. [92]
Likewise, the ? has a different meaning in globbing than as part of an RE.
bash$ ls -l
total 2
-rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 a.1
-rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 b.1
-rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 c.1
-rw-rw-r-- 1 bozo bozo 466 Aug 6 17:48 t2.sh
-rw-rw-r-- 1 bozo bozo 758 Jul 30 09:02 test1.txt
bash$ ls -l t?.sh
-rw-rw-r-- 1 bozo bozo 466 Aug 6 17:48 t2.sh
bash$ ls -l [ab]*
-rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 a.1
-rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 b.1
bash$ ls -l [a-c]*
-rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 a.1
-rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 b.1
-rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 c.1
bash$ ls -l [^ab]*
-rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 c.1
-rw-rw-r-- 1 bozo bozo 466 Aug 6 17:48 t2.sh
-rw-rw-r-- 1 bozo bozo 758 Jul 30 09:02 test1.txt
bash$ ls -l {b*,c*,*est*}
-rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 b.1
-rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 c.1
-rw-rw-r-- 1 bozo bozo 758 Jul 30 09:02 test1.txt
Bash performs filename expansion on unquoted command-line arguments. The echo command demonstrates
this.
bash$ echo *
a.1 b.1 c.1 t2.sh test1.txt
bash$ echo t*
t2.sh test1.txt
bash$ echo t?.sh
t2.sh
Chapter 17. Regular Expressions 347](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-353-320.jpg)
![Advanced Bash-Scripting Guide
Example 18-2. dummyfile: Creates a 2-line dummy file
#!/bin/bash
# Noninteractive use of 'vi' to edit a file.
# Emulates 'sed'.
E_BADARGS=85
if [ -z "$1" ]
then
echo "Usage: `basename $0` filename"
exit $E_BADARGS
fi
TARGETFILE=$1
# Insert 2 lines in file, then save.
#--------Begin here document-----------#
vi $TARGETFILE <<x23LimitStringx23
i
This is line 1 of the example file.
This is line 2 of the example file.
^[
ZZ
x23LimitStringx23
#----------End here document-----------#
# Note that ^[ above is a literal escape
#+ typed by Control-V <Esc>.
# Bram Moolenaar points out that this may not work with 'vim'
#+ because of possible problems with terminal interaction.
exit
The above script could just as effectively have been implemented with ex, rather than vi. Here documents
containing a list of ex commands are common enough to form their own category, known as ex scripts.
#!/bin/bash
# Replace all instances of "Smith" with "Jones"
#+ in files with a ".txt" filename suffix.
ORIGINAL=Smith
REPLACEMENT=Jones
for word in $(fgrep -l $ORIGINAL *.txt)
do
# -------------------------------------
ex $word <<EOF
:%s/$ORIGINAL/$REPLACEMENT/g
:wq
EOF
# :%s is the "ex" substitution command.
# :wq is write-and-quit.
# -------------------------------------
done
Analogous to "ex scripts" are cat scripts.
Chapter 18. Here Documents 350](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-356-320.jpg)
![Advanced Bash-Scripting Guide
# Leading tab in each line will not show.
# Above 5 lines of "message" prefaced by a tab, not spaces.
# Spaces not affected by <<- .
# Note that this option has no effect on *embedded* tabs.
exit 0
A here document supports parameter and command substitution. It is therefore possible to pass different
parameters to the body of the here document, changing its output accordingly.
Example 18-5. Here document with replaceable parameters
#!/bin/bash
# Another 'cat' here document, using parameter substitution.
# Try it with no command-line parameters, ./scriptname
# Try it with one command-line parameter, ./scriptname Mortimer
# Try it with one two-word quoted command-line parameter,
# ./scriptname "Mortimer Jones"
CMDLINEPARAM=1 # Expect at least command-line parameter.
if [ $# -ge $CMDLINEPARAM ]
then
NAME=$1 # If more than one command-line param,
#+ then just take the first.
else
NAME="John Doe" # Default, if no command-line parameter.
fi
RESPONDENT="the author of this fine script"
cat <<Endofmessage
Hello, there, $NAME.
Greetings to you, $NAME, from $RESPONDENT.
# This comment shows up in the output (why?).
Endofmessage
# Note that the blank lines show up in the output.
# So does the comment.
exit
This is a useful script containing a here document with parameter substitution.
Example 18-6. Upload a file pair to Sunsite incoming directory
#!/bin/bash
# upload.sh
# Upload file pair (Filename.lsm, Filename.tar.gz)
Chapter 18. Here Documents 352](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-358-320.jpg)
![Advanced Bash-Scripting Guide
#+ to incoming directory at Sunsite/UNC (ibiblio.org).
# Filename.tar.gz is the tarball itself.
# Filename.lsm is the descriptor file.
# Sunsite requires "lsm" file, otherwise will bounce contributions.
E_ARGERROR=85
if [ -z "$1" ]
then
echo "Usage: `basename $0` Filename-to-upload"
exit $E_ARGERROR
fi
Filename=`basename $1` # Strips pathname out of file name.
Server="ibiblio.org"
Directory="/incoming/Linux"
# These need not be hard-coded into script,
#+ but may instead be changed to command-line argument.
Password="your.e-mail.address" # Change above to suit.
ftp -n $Server <<End-Of-Session
# -n option disables auto-logon
user anonymous "$Password" # If this doesn't work, then try:
# quote user anonymous "$Password"
binary
bell # Ring 'bell' after each file transfer.
cd $Directory
put "$Filename.lsm"
put "$Filename.tar.gz"
bye
End-Of-Session
exit 0
Quoting or escaping the "limit string" at the head of a here document disables parameter substitution within its
body. The reason for this is that quoting/escaping the limit string effectively escapes the $, `, and special
characters, and causes them to be interpreted literally. (Thank you, Allen Halsey, for pointing this out.)
Example 18-7. Parameter substitution turned off
#!/bin/bash
# A 'cat' here-document, but with parameter substitution disabled.
NAME="John Doe"
RESPONDENT="the author of this fine script"
cat <<'Endofmessage'
Hello, there, $NAME.
Greetings to you, $NAME, from $RESPONDENT.
Endofmessage
# No parameter substitution when the "limit string" is quoted or escaped.
Chapter 18. Here Documents 353](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-359-320.jpg)
![Advanced Bash-Scripting Guide
echo "c = $c"
exit 0
EOF
) > $OUTFILE
# -----------------------------------------------------------
# Quoting the 'limit string' prevents variable expansion
#+ within the body of the above 'here document.'
# This permits outputting literal strings in the output file.
if [ -f "$OUTFILE" ]
then
chmod 755 $OUTFILE
# Make the generated file executable.
else
echo "Problem in creating file: "$OUTFILE""
fi
# This method can also be used for generating
#+ C programs, Perl programs, Python programs, Makefiles,
#+ and the like.
exit 0
It is possible to set a variable from the output of a here document. This is actually a devious form of command
substitution.
variable=$(cat <<SETVAR
This variable
runs over multiple lines.
SETVAR)
echo "$variable"
A here document can supply input to a function in the same script.
Example 18-9. Here documents and functions
#!/bin/bash
# here-function.sh
GetPersonalData ()
{
read firstname
read lastname
read address
read city
read state
read zipcode
} # This certainly looks like an interactive function, but...
# Supply input to the above function.
GetPersonalData <<RECORD001
Bozo
Bozeman
2726 Nondescript Dr.
Chapter 18. Here Documents 355](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-361-320.jpg)
![Advanced Bash-Scripting Guide
: <<DEBUGXXX
for file in *
do
cat "$file"
done
DEBUGXXX
# ===================================================================
echo "Just after commented-out code block."
exit 0
######################################################################
# Note, however, that if a bracketed variable is contained within
#+ the commented-out code block,
#+ then this could cause problems.
# for example:
#/!/bin/bash
: <<COMMENTBLOCK
echo "This line will not echo."
&*@!!++=
${foo_bar_bazz?}
$(rm -rf /tmp/foobar/)
$(touch my_build_directory/cups/Makefile)
COMMENTBLOCK
$ sh commented-bad.sh
commented-bad.sh: line 3: foo_bar_bazz: parameter null or not set
# The remedy for this is to strong-quote the 'COMMENTBLOCK' in line 49, above.
: <<'COMMENTBLOCK'
# Thank you, Kurt Pfeifle, for pointing this out.
Yet another twist of this nifty trick makes "self-documenting" scripts possible.
Example 18-12. A self-documenting script
#!/bin/bash
# self-document.sh: self-documenting script
# Modification of "colm.sh".
DOC_REQUEST=70
if [ "$1" = "-h" -o "$1" = "--help" ] # Request help.
then
echo; echo "Usage: $0 [directory-name]"; echo
sed --silent -e '/DOCUMENTATIONXX$/,/^DOCUMENTATIONXX$/p' "$0" |
sed -e '/DOCUMENTATIONXX$/d'; exit $DOC_REQUEST; fi
: <<DOCUMENTATIONXX
List the statistics of a specified directory in tabular format.
---------------------------------------------------------------
Chapter 18. Here Documents 357](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-363-320.jpg)
![Advanced Bash-Scripting Guide
The command-line parameter gives the directory to be listed.
If no directory specified or directory specified cannot be read,
then list the current working directory.
DOCUMENTATIONXX
if [ -z "$1" -o ! -r "$1" ]
then
directory=.
else
directory="$1"
fi
echo "Listing of "$directory":"; echo
(printf "PERMISSIONS LINKS OWNER GROUP SIZE MONTH DAY HH:MM PROG-NAMEn"
; ls -l "$directory" | sed 1d) | column -t
exit 0
Using a cat script is an alternate way of accomplishing this.
DOC_REQUEST=70
if [ "$1" = "-h" -o "$1" = "--help" ] # Request help.
then # Use a "cat script" . . .
cat <<DOCUMENTATIONXX
List the statistics of a specified directory in tabular format.
---------------------------------------------------------------
The command-line parameter gives the directory to be listed.
If no directory specified or directory specified cannot be read,
then list the current working directory.
DOCUMENTATIONXX
exit $DOC_REQUEST
fi
See also Example A-28, Example A-40, Example A-41, and Example A-42 for more examples of
self-documenting scripts.
Here documents create temporary files, but these files are deleted after opening and are not accessible to
any other process.
bash$ bash -c 'lsof -a -p $$ -d0' << EOF
> EOF
lsof 1213 bozo 0r REG 3,5 0 30386 /tmp/t1213-0-sh (deleted)
Some utilities will not work inside a here document.
The closing limit string, on the final line of a here document, must start in the first character position.
There can be no leading whitespace. Trailing whitespace after the limit string likewise causes
unexpected behavior. The whitespace prevents the limit string from being recognized.
#!/bin/bash
echo "----------------------------------------------------------------------"
Chapter 18. Here Documents 358](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-364-320.jpg)
![Advanced Bash-Scripting Guide
As a simple example, consider this alternative to the echo-grep construction.
# Instead of:
if echo "$VAR" | grep -q txt # if [[ $VAR = *txt* ]]
# etc.
# Try:
if grep -q "txt" <<< "$VAR"
then # ^^^
echo "$VAR contains the substring sequence "txt""
fi
# Thank you, Sebastian Kaminski, for the suggestion.
Or, in combination with read:
String="This is a string of words."
read -r -a Words <<< "$String"
# The -a option to "read"
#+ assigns the resulting values to successive members of an array.
echo "First word in String is: ${Words[0]}" # This
echo "Second word in String is: ${Words[1]}" # is
echo "Third word in String is: ${Words[2]}" # a
echo "Fourth word in String is: ${Words[3]}" # string
echo "Fifth word in String is: ${Words[4]}" # of
echo "Sixth word in String is: ${Words[5]}" # words.
echo "Seventh word in String is: ${Words[6]}" # (null)
# Past end of $String.
# Thank you, Francisco Lobo, for the suggestion.
Example 18-13. Prepending a line to a file
#!/bin/bash
# prepend.sh: Add text at beginning of file.
#
# Example contributed by Kenny Stauffer,
#+ and slightly modified by document author.
E_NOSUCHFILE=85
read -p "File: " file # -p arg to 'read' displays prompt.
if [ ! -e "$file" ]
then # Bail out if no such file.
echo "File $file not found."
exit $E_NOSUCHFILE
fi
read -p "Title: " title
cat - $file <<<$title > $file.new
echo "Modified file is $file.new"
exit # Ends script execution.
from 'man bash':
Chapter 18. Here Documents 360](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-366-320.jpg)
![Advanced Bash-Scripting Guide
Here Strings
A variant of here documents, the format is:
<<<word
The word is expanded and supplied to the command on its standard input.
Of course, the following also works:
sed -e '1i
Title: ' $file
Example 18-14. Parsing a mailbox
#!/bin/bash
# Script by Francisco Lobo,
#+ and slightly modified and commented by ABS Guide author.
# Used in ABS Guide with permission. (Thank you!)
# This script will not run under Bash versions < 3.0.
E_MISSING_ARG=67
if [ -z "$1" ]
then
echo "Usage: $0 mailbox-file"
exit $E_MISSING_ARG
fi
mbox_grep() # Parse mailbox file.
{
declare -i body=0 match=0
declare -a date sender
declare mail header value
while IFS= read -r mail
# ^^^^ Reset $IFS.
# Otherwise "read" will strip leading & trailing space from its input.
do
if [[ $mail =~ "^From " ]] # Match "From" field in message.
then
(( body = 0 )) # "Zero out" variables.
(( match = 0 ))
unset date
elif (( body ))
then
(( match ))
# echo "$mail"
# Uncomment above line if you want entire body of message to display.
elif [[ $mail ]]; then
IFS=: read -r header value <<< "$mail"
# ^^^ "here string"
case "$header" in
[Ff][Rr][Oo][Mm] ) [[ $value =~ "$2" ]] && (( match++ )) ;;
# Match "From" line.
[Dd][Aa][Tt][Ee] ) read -r -a date <<< "$value" ;;
Chapter 18. Here Documents 361](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-367-320.jpg)
![Advanced Bash-Scripting Guide
# ^^^
# Match "Date" line.
[Rr][Ee][Cc][Ee][Ii][Vv][Ee][Dd] ) read -r -a sender <<< "$value" ;;
# ^^^
# Match IP Address (may be spoofed).
esac
else
(( body++ ))
(( match )) &&
echo "MESSAGE ${date:+of: ${date[*]} }"
# Entire $date array ^
echo "IP address of sender: ${sender[1]}"
# Second field of "Received" line ^
fi
done < "$1" # Redirect stdout of file into loop.
}
mbox_grep "$1" # Send mailbox file to function.
exit $?
# Exercises:
# ---------
# 1) Break the single function, above, into multiple functions,
#+ for the sake of readability.
# 2) Add additional parsing to the script, checking for various keywords.
$ mailbox_grep.sh scam_mail
MESSAGE of Thu, 5 Jan 2006 08:00:56 -0500 (EST)
IP address of sender: 196.3.62.4
Exercise: Find other uses for here strings, such as, for example, feeding input to dc.
Chapter 18. Here Documents 362](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-368-320.jpg)
![Chapter 19. I/O Redirection
There are always three default files [93] open, stdin (the keyboard), stdout (the screen), and stderr
(error messages output to the screen). These, and any other open files, can be redirected. Redirection simply
means capturing output from a file, command, program, script, or even code block within a script (see
Example 3-1 and Example 3-2) and sending it as input to another file, command, program, or script.
Each open file gets assigned a file descriptor. [94] The file descriptors for stdin, stdout, and stderr are
0, 1, and 2, respectively. For opening additional files, there remain descriptors 3 to 9. It is sometimes useful to
assign one of these additional file descriptors to stdin, stdout, or stderr as a temporary duplicate link.
[95] This simplifies restoration to normal after complex redirection and reshuffling (see Example 19-1).
COMMAND_OUTPUT >
# Redirect stdout to a file.
# Creates the file if not present, otherwise overwrites it.
ls -lR > dir-tree.list
# Creates a file containing a listing of the directory tree.
: > filename
# The > truncates file "filename" to zero length.
# If file not present, creates zero-length file (same effect as 'touch').
# The : serves as a dummy placeholder, producing no output.
> filename
# The > truncates file "filename" to zero length.
# If file not present, creates zero-length file (same effect as 'touch').
# (Same result as ": >", above, but this does not work with some shells.)
COMMAND_OUTPUT >>
# Redirect stdout to a file.
# Creates the file if not present, otherwise appends to it.
# Single-line redirection commands (affect only the line they are on):
# --------------------------------------------------------------------
1>filename
# Redirect stdout to file "filename."
1>>filename
# Redirect and append stdout to file "filename."
2>filename
# Redirect stderr to file "filename."
2>>filename
# Redirect and append stderr to file "filename."
&>filename
# Redirect both stdout and stderr to file "filename."
#
# Note that &>>filename
#+ -- attempting to redirect and *append*
#+ stdout and stderr to file "filename" --
#+ fails with the error message,
#+ syntax error near unexpected token `>'.
# The &>> operator is supposed to be functional in Bash 4,
#+ but as of version 4.0 still is not.
Chapter 19. I/O Redirection 363](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-369-320.jpg)
![Advanced Bash-Scripting Guide
M>N
# "M" is a file descriptor, which defaults to 1, if not explicitly set.
# "N" is a filename.
# File descriptor "M" is redirect to file "N."
M>&N
# "M" is a file descriptor, which defaults to 1, if not set.
# "N" is another file descriptor.
#==============================================================================
# Redirecting stdout, one line at a time.
LOGFILE=script.log
echo "This statement is sent to the log file, "$LOGFILE"." 1>$LOGFILE
echo "This statement is appended to "$LOGFILE"." 1>>$LOGFILE
echo "This statement is also appended to "$LOGFILE"." 1>>$LOGFILE
echo "This statement is echoed to stdout, and will not appear in "$LOGFILE"."
# These redirection commands automatically "reset" after each line.
# Redirecting stderr, one line at a time.
ERRORFILE=script.errors
bad_command1 2>$ERRORFILE # Error message sent to $ERRORFILE.
bad_command2 2>>$ERRORFILE # Error message appended to $ERRORFILE.
bad_command3 # Error message echoed to stderr,
#+ and does not appear in $ERRORFILE.
# These redirection commands also automatically "reset" after each line.
#=======================================================================
2>&1
# Redirects stderr to stdout.
# Error messages get sent to same place as standard output.
>>filename 2>&1
bad_command >>filename 2>&1
# Appends both stdout and stderr to the file "filename" ...
2>&1 | [command(s)]
bad_command 2>&1 | awk '{print $5}' # found
# Sends stderr through a pipe.
# |& was added to Bash 4 as an abbreviation for 2>&
#+ but as of version 4.0 this still does not work.
i>&j
# Redirects file descriptor i to j.
# All output of file pointed to by i gets sent to file pointed to by j.
>&j
# Redirects, by default, file descriptor 1 (stdout) to j.
# All stdout gets sent to file pointed to by j.
0< FILENAME
< FILENAME
# Accept input from a file.
# Companion command to ">", and often used in combination with it.
#
# grep search-word <filename
[j]<>filename
# Open file "filename" for reading and writing,
Chapter 19. I/O Redirection 364](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-370-320.jpg)
![Advanced Bash-Scripting Guide
if [ ! -r "$1" ] # Is specified input file readable?
then
echo "Can't read from input file!"
echo "Usage: $0 input-file output-file"
exit $E_FILE_ACCESS
fi # Will exit with same error
#+ even if input file ($1) not specified (why?).
if [ -z "$2" ]
then
echo "Need to specify output file."
echo "Usage: $0 input-file output-file"
exit $E_WRONG_ARGS
fi
exec 4<&0
exec < $1 # Will read from input file.
exec 7>&1
exec > $2 # Will write to output file.
# Assumes output file writable (add check?).
# -----------------------------------------------
cat - | tr a-z A-Z # Uppercase conversion.
# ^^^^^ # Reads from stdin.
# ^^^^^^^^^^ # Writes to stdout.
# However, both stdin and stdout were redirected.
# Note that the 'cat' can be omitted.
# -----------------------------------------------
exec 1>&7 7>&- # Restore stout.
exec 0<&4 4<&- # Restore stdin.
# After restoration, the following line prints to stdout as expected.
echo "File "$1" written to "$2" as uppercase conversion."
exit 0
I/O redirection is a clever way of avoiding the dreaded inaccessible variables within a subshell problem.
Example 19-4. Avoiding a subshell
#!/bin/bash
# avoid-subshell.sh
# Suggested by Matthew Walker.
Lines=0
echo
cat myfile.txt | while read line;
do {
echo $line
(( Lines++ )); # Incremented values of this variable
#+ inaccessible outside loop.
# Subshell problem.
}
done
Chapter 19. I/O Redirection 368](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-374-320.jpg)
![Advanced Bash-Scripting Guide
echo "Number of lines read = $Lines" # 0
# Wrong!
echo "------------------------"
exec 3<> myfile.txt
while read line <&3
do {
echo "$line"
(( Lines++ )); # Incremented values of this variable
#+ accessible outside loop.
# No subshell, no problem.
}
done
exec 3>&-
echo "Number of lines read = $Lines" # 8
echo
exit 0
# Lines below not seen by script.
$ cat myfile.txt
Line 1.
Line 2.
Line 3.
Line 4.
Line 5.
Line 6.
Line 7.
Line 8.
19.2. Redirecting Code Blocks
Blocks of code, such as while, until, and for loops, even if/then test blocks can also incorporate redirection of
stdin. Even a function may use this form of redirection (see Example 23-11). The < operator at the end of
the code block accomplishes this.
Example 19-5. Redirected while loop
#!/bin/bash
# redir2.sh
if [ -z "$1" ]
then
Filename=names.data # Default, if no filename specified.
else
Filename=$1
fi
#+ Filename=${1:-names.data}
# can replace the above test (parameter substitution).
count=0
Chapter 19. I/O Redirection 369](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-375-320.jpg)
![Advanced Bash-Scripting Guide
echo
while [ "$name" != Smith ] # Why is variable $name in quotes?
do
read name # Reads from $Filename, rather than stdin.
echo $name
let "count += 1"
done <"$Filename" # Redirects stdin to file $Filename.
# ^^^^^^^^^^^^
echo; echo "$count names read"; echo
exit 0
# Note that in some older shell scripting languages,
#+ the redirected loop would run as a subshell.
# Therefore, $count would return 0, the initialized value outside the loop.
# Bash and ksh avoid starting a subshell *whenever possible*,
#+ so that this script, for example, runs correctly.
# (Thanks to Heiner Steven for pointing this out.)
# However . . .
# Bash *can* sometimes start a subshell in a PIPED "while-read" loop,
#+ as distinct from a REDIRECTED "while" loop.
abc=hi
echo -e "1n2n3" | while read l
do abc="$l"
echo $abc
done
echo $abc
# Thanks, Bruno de Oliveira Schneider, for demonstrating this
#+ with the above snippet of code.
# And, thanks, Brian Onn, for correcting an annotation error.
Example 19-6. Alternate form of redirected while loop
#!/bin/bash
# This is an alternate form of the preceding script.
# Suggested by Heiner Steven
#+ as a workaround in those situations when a redirect loop
#+ runs as a subshell, and therefore variables inside the loop
# +do not keep their values upon loop termination.
if [ -z "$1" ]
then
Filename=names.data # Default, if no filename specified.
else
Filename=$1
fi
exec 3<&0 # Save stdin to file descriptor 3.
exec 0<"$Filename" # Redirect standard input.
count=0
echo
Chapter 19. I/O Redirection 370](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-376-320.jpg)
![Advanced Bash-Scripting Guide
while [ "$name" != Smith ]
do
read name # Reads from redirected stdin ($Filename).
echo $name
let "count += 1"
done # Loop reads from file $Filename
#+ because of line 20.
# The original version of this script terminated the "while" loop with
#+ done <"$Filename"
# Exercise:
# Why is this unnecessary?
exec 0<&3 # Restore old stdin.
exec 3<&- # Close temporary fd 3.
echo; echo "$count names read"; echo
exit 0
Example 19-7. Redirected until loop
#!/bin/bash
# Same as previous example, but with "until" loop.
if [ -z "$1" ]
then
Filename=names.data # Default, if no filename specified.
else
Filename=$1
fi
# while [ "$name" != Smith ]
until [ "$name" = Smith ] # Change != to =.
do
read name # Reads from $Filename, rather than stdin.
echo $name
done <"$Filename" # Redirects stdin to file $Filename.
# ^^^^^^^^^^^^
# Same results as with "while" loop in previous example.
exit 0
Example 19-8. Redirected for loop
#!/bin/bash
if [ -z "$1" ]
then
Filename=names.data # Default, if no filename specified.
else
Filename=$1
fi
line_count=`wc $Filename | awk '{ print $1 }'`
# Number of lines in target file.
Chapter 19. I/O Redirection 371](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-377-320.jpg)
![Advanced Bash-Scripting Guide
#
# Very contrived and kludgy, nevertheless shows that
#+ it's possible to redirect stdin within a "for" loop...
#+ if you're clever enough.
#
# More concise is line_count=$(wc -l < "$Filename")
for name in `seq $line_count` # Recall that "seq" prints sequence of numbers.
# while [ "$name" != Smith ] -- more complicated than a "while" loop --
do
read name # Reads from $Filename, rather than stdin.
echo $name
if [ "$name" = Smith ] # Need all this extra baggage here.
then
break
fi
done <"$Filename" # Redirects stdin to file $Filename.
# ^^^^^^^^^^^^
exit 0
We can modify the previous example to also redirect the output of the loop.
Example 19-9. Redirected for loop (both stdin and stdout redirected)
#!/bin/bash
if [ -z "$1" ]
then
Filename=names.data # Default, if no filename specified.
else
Filename=$1
fi
Savefile=$Filename.new # Filename to save results in.
FinalName=Jonah # Name to terminate "read" on.
line_count=`wc $Filename | awk '{ print $1 }'` # Number of lines in target file.
for name in `seq $line_count`
do
read name
echo "$name"
if [ "$name" = "$FinalName" ]
then
break
fi
done < "$Filename" > "$Savefile" # Redirects stdin to file $Filename,
# ^^^^^^^^^^^^^^^^^^^^^^^^^^^ and saves it to backup file.
exit 0
Example 19-10. Redirected if/then test
#!/bin/bash
if [ -z "$1" ]
then
Chapter 19. I/O Redirection 372](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-378-320.jpg)
![Advanced Bash-Scripting Guide
Filename=names.data # Default, if no filename specified.
else
Filename=$1
fi
TRUE=1
if [ "$TRUE" ] # if true and if : also work.
then
read name
echo $name
fi <"$Filename"
# ^^^^^^^^^^^^
# Reads only first line of file.
# An "if/then" test has no way of iterating unless embedded in a loop.
exit 0
Example 19-11. Data file names.data for above examples
Aristotle
Belisarius
Capablanca
Euler
Goethe
Hamurabi
Jonah
Laplace
Maroczy
Purcell
Schmidt
Semmelweiss
Smith
Turing
Venn
Wilkinson
Znosko-Borowski
# This is a data file for
#+ "redir2.sh", "redir3.sh", "redir4.sh", "redir4a.sh", "redir5.sh".
Redirecting the stdout of a code block has the effect of saving its output to a file. See Example 3-2.
Here documents are a special case of redirected code blocks. That being the case, it should be possible to feed
the output of a here document into the stdin for a while loop.
# This example by Albert Siersema
# Used with permission (thanks!).
function doesOutput()
# Could be an external command too, of course.
# Here we show you can use a function as well.
{
ls -al *.jpg | awk '{print $5,$9}'
}
nr=0 # We want the while loop to be able to manipulate these and
totalSize=0 #+ to be able to see the changes after the while finished.
Chapter 19. I/O Redirection 373](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-379-320.jpg)
![Advanced Bash-Scripting Guide
while read fileSize fileName ; do
echo "$fileName is $fileSize bytes"
let nr++
totalSize=$((totalSize+fileSize)) # Or: "let totalSize+=fileSize"
done<<EOF
$(doesOutput)
EOF
echo "$nr files totaling $totalSize bytes"
19.3. Applications
Clever use of I/O redirection permits parsing and stitching together snippets of command output (see Example
14-7). This permits generating report and log files.
Example 19-12. Logging events
#!/bin/bash
# logevents.sh
# Author: Stephane Chazelas.
# Used in ABS Guide with permission.
# Event logging to a file.
# Must be run as root (for write access in /var/log).
ROOT_UID=0 # Only users with $UID 0 have root privileges.
E_NOTROOT=67 # Non-root exit error.
if [ "$UID" -ne "$ROOT_UID" ]
then
echo "Must be root to run this script."
exit $E_NOTROOT
fi
FD_DEBUG1=3
FD_DEBUG2=4
FD_DEBUG3=5
# === Uncomment one of the two lines below to activate script. ===
# LOG_EVENTS=1
# LOG_VARS=1
log() # Writes time and date to log file.
{
echo "$(date) $*" >&7 # This *appends* the date to the file.
# ^^^^^^^ command substitution
# See below.
}
case $LOG_LEVEL in
1) exec 3>&2 4> /dev/null 5> /dev/null;;
2) exec 3>&2 4>&2 5> /dev/null;;
3) exec 3>&2 4>&2 5>&2;;
Chapter 19. I/O Redirection 374](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-380-320.jpg)
![Advanced Bash-Scripting Guide
*) exec 3> /dev/null 4> /dev/null 5> /dev/null;;
esac
FD_LOGVARS=6
if [[ $LOG_VARS ]]
then exec 6>> /var/log/vars.log
else exec 6> /dev/null # Bury output.
fi
FD_LOGEVENTS=7
if [[ $LOG_EVENTS ]]
then
# exec 7 >(exec gawk '{print strftime(), $0}' >> /var/log/event.log)
# Above line fails in versions of Bash more recent than 2.04. Why?
exec 7>> /var/log/event.log # Append to "event.log".
log # Write time and date.
else exec 7> /dev/null # Bury output.
fi
echo "DEBUG3: beginning" >&${FD_DEBUG3}
ls -l >&5 2>&4 # command1 >&5 2>&4
echo "Done" # command2
echo "sending mail" >&${FD_LOGEVENTS}
# Writes "sending mail" to file descriptor #7.
exit 0
Chapter 19. I/O Redirection 375](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-381-320.jpg)
![Chapter 20. Subshells
Running a shell script launches a new process, a subshell.
Definition: A subshell is a child process launched by a shell (or shell script).
A subshell is a separate instance of the command processor -- the shell that gives you the prompt at the
console or in an xterm window. Just as your commands are interpreted at the command-line prompt, similarly
does a script batch-process a list of commands. Each shell script running is, in effect, a subprocess (child
process) of the parent shell.
A shell script can itself launch subprocesses. These subshells let the script do parallel processing, in effect
executing multiple subtasks simultaneously.
#!/bin/bash
# subshell-test.sh
(
# Inside parentheses, and therefore a subshell . . .
while [ 1 ] # Endless loop.
do
echo "Subshell running . . ."
done
)
# Script will run forever,
#+ or at least until terminated by a Ctl-C.
exit $? # End of script (but will never get here).
Now, run the script:
sh subshell-test.sh
And, while the script is running, from a different xterm:
ps -ef | grep subshell-test.sh
UID PID PPID C STIME TTY TIME CMD
500 2698 2502 0 14:26 pts/4 00:00:00 sh subshell-test.sh
500 2699 2698 21 14:26 pts/4 00:00:24 sh subshell-test.sh
^^^^
Analysis:
PID 2698, the script, launched PID 2699, the subshell.
Note: The "UID ..." line would be filtered out by the "grep" command,
but is shown here for illustrative purposes.
In general, an external command in a script forks off a subprocess, [96] whereas a Bash builtin does not. For
this reason, builtins execute more quickly and use fewer system resources than their external command
equivalents.
Command List within Parentheses
Chapter 20. Subshells 376](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-382-320.jpg)
![Advanced Bash-Scripting Guide
( command1; command2; command3; ... )
A command list embedded between parentheses runs as a subshell.
Variables in a subshell are not visible outside the block of code in the subshell. They are not accessible to the
parent process, to the shell that launched the subshell. These are, in effect, variables local to the child process.
Example 20-1. Variable scope in a subshell
#!/bin/bash
# subshell.sh
echo
echo "We are outside the subshell."
echo "Subshell level OUTSIDE subshell = $BASH_SUBSHELL"
# Bash, version 3, adds the new $BASH_SUBSHELL variable.
echo; echo
outer_variable=Outer
global_variable=
# Define global variable for "storage" of
#+ value of subshell variable.
(
echo "We are inside the subshell."
echo "Subshell level INSIDE subshell = $BASH_SUBSHELL"
inner_variable=Inner
echo "From inside subshell, "inner_variable" = $inner_variable"
echo "From inside subshell, "outer" = $outer_variable"
global_variable="$inner_variable" # Will this allow "exporting"
#+ a subshell variable?
)
echo; echo
echo "We are outside the subshell."
echo "Subshell level OUTSIDE subshell = $BASH_SUBSHELL"
echo
if [ -z "$inner_variable" ]
then
echo "inner_variable undefined in main body of shell"
else
echo "inner_variable defined in main body of shell"
fi
echo "From main body of shell, "inner_variable" = $inner_variable"
# $inner_variable will show as blank (uninitialized)
#+ because variables defined in a subshell are "local variables".
# Is there a remedy for this?
echo "global_variable = "$global_variable"" # Why doesn't this work?
echo
# =======================================================================
# Additionally ...
Chapter 20. Subshells 377](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-383-320.jpg)
![Advanced Bash-Scripting Guide
echo "-----------------"; echo
var=41 # Global variable.
( let "var+=1"; echo "$var INSIDE subshell = $var" ) # 42
echo "$var OUTSIDE subshell = $var" # 41
# Variable operations inside a subshell, even to a GLOBAL variable
#+ do not affect the value of the variable outside the subshell!
exit 0
# Question:
# --------
# Once having exited a subshell,
#+ is there any way to reenter that very same subshell
#+ to modify or access the subshell variables?
See also $BASHPID and Example 31-2.
Definition: The scope of a variable is the context in which it has meaning, in which it has a value that
can be referenced. For example, the scope of a local variable lies only within the function, block of code, or
subshell within which it is defined, while the scope of a global variable is the entire script in which it
appears.
While the $BASH_SUBSHELL internal variable indicates the nesting level of a subshell, the $SHLVL
variable shows no change within a subshell.
echo " $BASH_SUBSHELL outside subshell = $BASH_SUBSHELL" # 0
( echo " $BASH_SUBSHELL inside subshell = $BASH_SUBSHELL" ) # 1
( ( echo " $BASH_SUBSHELL inside nested subshell = $BASH_SUBSHELL" ) ) # 2
# ^ ^ *** nested *** ^ ^
echo
echo " $SHLVL outside subshell = $SHLVL" # 3
( echo " $SHLVL inside subshell = $SHLVL" ) # 3 (No change!)
Directory changes made in a subshell do not carry over to the parent shell.
Example 20-2. List User Profiles
#!/bin/bash
# allprofs.sh: Print all user profiles.
# This script written by Heiner Steven, and modified by the document author.
FILE=.bashrc # File containing user profile,
#+ was ".profile" in original script.
for home in `awk -F: '{print $6}' /etc/passwd`
do
[ -d "$home" ] || continue # If no home directory, go to next.
[ -r "$home" ] || continue # If not readable, go to next.
(cd $home; [ -e $FILE ] && less $FILE)
Chapter 20. Subshells 378](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-384-320.jpg)
![Advanced Bash-Scripting Guide
done
# When script terminates, there is no need to 'cd' back to original directory,
#+ because 'cd $home' takes place in a subshell.
exit 0
A subshell may be used to set up a "dedicated environment" for a command group.
COMMAND1
COMMAND2
COMMAND3
(
IFS=:
PATH=/bin
unset TERMINFO
set -C
shift 5
COMMAND4
COMMAND5
exit 3 # Only exits the subshell!
)
# The parent shell has not been affected, and the environment is preserved.
COMMAND6
COMMAND7
As seen here, the exit command only terminates the subshell in which it is running, not the parent shell or
script.
One application of such a "dedicated environment" is testing whether a variable is defined.
if (set -u; : $variable) 2> /dev/null
then
echo "Variable is set."
fi # Variable has been set in current script,
#+ or is an an internal Bash variable,
#+ or is present in environment (has been exported).
# Could also be written [[ ${variable-x} != x || ${variable-y} != y ]]
# or [[ ${variable-x} != x$variable ]]
# or [[ ${variable+x} = x ]]
# or [[ ${variable-x} != x ]]
Another application is checking for a lock file:
if (set -C; : > lock_file) 2> /dev/null
then
: # lock_file didn't exist: no user running the script
else
echo "Another user is already running that script."
exit 65
fi
# Code snippet by Stéphane Chazelas,
#+ with modifications by Paulo Marcel Coelho Aragao.
+
Processes may execute in parallel within different subshells. This permits breaking a complex task into
subcomponents processed concurrently.
Chapter 20. Subshells 379](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-385-320.jpg)
![Chapter 22. Process Substitution
Piping the stdout of a command into the stdin of another is a powerful technique. But, what if you need
to pipe the stdout of multiple commands? This is where process substitution comes in.
Process substitution feeds the output of a process (or processes) into the stdin of another process.
Template
Command list enclosed within parentheses
>(command_list)
<(command_list)
Process substitution uses /dev/fd/<n> files to send the results of the process(es) within
parentheses to another process. [97]
There is no space between the the "<" or ">" and the parentheses. Space there would
give an error message.
bash$ echo >(true)
/dev/fd/63
bash$ echo <(true)
/dev/fd/63
bash$ echo >(true) <(true)
/dev/fd/63 /dev/fd/62
bash$ wc <(cat /usr/share/dict/linux.words)
483523 483523 4992010 /dev/fd/63
bash$ grep script /usr/share/dict/linux.words | wc
262 262 3601
bash$ wc <(grep script /usr/share/dict/linux.words)
262 262 3601 /dev/fd/63
Bash creates a pipe with two file descriptors, --fIn and fOut--. The stdin of true connects to
fOut (dup2(fOut, 0)), then Bash passes a /dev/fd/fIn argument to echo. On systems lacking
/dev/fd/<n> files, Bash may use temporary files. (Thanks, S.C.)
Process substitution can compare the output of two different commands, or even the output of different
options to the same command.
bash$ comm <(ls -l) <(ls -al)
total 12
-rw-rw-r-- 1 bozo bozo 78 Mar 10 12:58 File0
-rw-rw-r-- 1 bozo bozo 42 Mar 10 12:58 File2
-rw-rw-r-- 1 bozo bozo 103 Mar 10 12:58 t2.sh
total 20
drwxrwxrwx 2 bozo bozo 4096 Mar 10 18:10 .
Chapter 22. Process Substitution 383](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-389-320.jpg)
![Advanced Bash-Scripting Guide
echo
echo "random input" | while read i
do
global=3D": Not available outside the loop."
# ... because it runs in a subshell.
done
echo "$global (from outside the subprocess) = $global"
# $global (from outside the subprocess) =
echo; echo "--"; echo
while read i
do
echo $i
global=3D": Available outside the loop."
# ... because it does *not* run in a subshell.
done < <( echo "random input" )
# ^ ^
echo "$global (using process substitution) = $global"
# Random input
# $global (using process substitution) = 3D: Available outside the loop.
echo; echo "##########"; echo
# And likewise . . .
declare -a inloop
index=0
cat $0 | while read line
do
inloop[$index]="$line"
((index++))
# It runs in a subshell, so ...
done
echo "OUTPUT = "
echo ${inloop[*]} # ... nothing echoes.
echo; echo "--"; echo
declare -a outloop
index=0
while read line
do
outloop[$index]="$line"
((index++))
# It does *not* run in a subshell, so ...
done < <( cat $0 )
echo "OUTPUT = "
echo ${outloop[*]} # ... the entire script echoes.
exit $?
A reader sent in the following interesting example of process substitution.
Chapter 22. Process Substitution 385](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-391-320.jpg)
![Advanced Bash-Scripting Guide
{ # A somewhat more complex function.
i=0
REPEATS=30
echo
echo "And now the fun really begins."
echo
sleep $JUST_A_SECOND # Hey, wait a second!
while [ $i -lt $REPEATS ]
do
echo "----------FUNCTIONS---------->"
echo "<------------ARE-------------"
echo "<------------FUN------------>"
echo
let "i+=1"
done
}
# Now, call the functions.
funky
fun
exit 0
The function definition must precede the first call to it. There is no method of "declaring" the function, as, for
example, in C.
f1
# Will give an error message, since function "f1" not yet defined.
declare -f f1 # This doesn't help either.
f1 # Still an error message.
# However...
f1 ()
{
echo "Calling function "f2" from within function "f1"."
f2
}
f2 ()
{
echo "Function "f2"."
}
f1 # Function "f2" is not actually called until this point,
#+ although it is referenced before its definition.
# This is permissible.
# Thanks, S.C.
Functions may not be empty!
#!/bin/bash
# empty-function.sh
Chapter 23. Functions 388](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-394-320.jpg)
![Advanced Bash-Scripting Guide
empty ()
{
}
exit 0 # Will not exit here!
# $ sh empty-function.sh
# empty-function.sh: line 6: syntax error near unexpected token `}'
# empty-function.sh: line 6: `}'
# $ echo $?
# 2
# However ...
not_quite_empty ()
{
illegal_command
} # A script containing this function will *not* bomb
#+ as long as the function is not called.
# Thank you, Thiemo Kellner, for pointing this out.
It is even possible to nest a function within another function, although this is not very useful.
f1 ()
{
f2 () # nested
{
echo "Function "f2", inside "f1"."
}
}
f2 # Gives an error message.
# Even a preceding "declare -f f2" wouldn't help.
echo
f1 # Does nothing, since calling "f1" does not automatically call "f2".
f2 # Now, it's all right to call "f2",
#+ since its definition has been made visible by calling "f1".
# Thanks, S.C.
Function declarations can appear in unlikely places, even where a command would otherwise go.
ls -l | foo() { echo "foo"; } # Permissible, but useless.
if [ "$USER" = bozo ]
then
bozo_greet () # Function definition embedded in an if/then construct.
{
echo "Hello, Bozo."
}
fi
Chapter 23. Functions 389](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-395-320.jpg)
![Advanced Bash-Scripting Guide
bozo_greet # Works only for Bozo, and other users get an error.
# Something like this might be useful in some contexts.
NO_EXIT=1 # Will enable function definition below.
[[ $NO_EXIT -eq 1 ]] && exit() { true; } # Function definition in an "and-list".
# If $NO_EXIT is 1, declares "exit ()".
# This disables the "exit" builtin by aliasing it to "true".
exit # Invokes "exit ()" function, not "exit" builtin.
# Or, similarly:
filename=file1
[ -f "$filename" ] &&
foo () { rm -f "$filename"; echo "File "$filename" deleted."; } ||
foo () { echo "File "$filename" not found."; touch bar; }
foo
# Thanks, S.C. and Christopher Head
Functions can take strange forms.
_(){ for i in {1..10}; do echo -n "$FUNCNAME"; done; echo; }
# ^^^ No space between function name and parentheses.
# This doesn't always work. Why not?
# Now, let's invoke the function.
_ # __________
# ^^^^^^^^^^ 10 underscores (10 x function name)!
# A "naked" underscore is an acceptable function name.
What happens when different versions of the same function appear in a script?
# As Yan Chen points out,
# when a function is defined multiple times,
# the final version is what is invoked.
# This is not, however, particularly useful.
func ()
{
echo "First version of func ()."
}
func ()
{
echo "Second version of func ()."
}
func # Second version of func ().
exit $?
# It is even possible to use functions to override
#+ or preempt system commands.
Chapter 23. Functions 390](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-396-320.jpg)
![Advanced Bash-Scripting Guide
# Of course, this is *not* advisable.
23.1. Complex Functions and Function Complexities
Functions may process arguments passed to them and return an exit status to the script for further processing.
function_name $arg1 $arg2
The function refers to the passed arguments by position (as if they were positional parameters), that is, $1,
$2, and so forth.
Example 23-2. Function Taking Parameters
#!/bin/bash
# Functions and parameters
DEFAULT=default # Default param value.
func2 () {
if [ -z "$1" ] # Is parameter #1 zero length?
then
echo "-Parameter #1 is zero length.-" # Or no parameter passed.
else
echo "-Param #1 is "$1".-"
fi
variable=${1-$DEFAULT} # What does
echo "variable = $variable" #+ parameter substitution show?
# ---------------------------
# It distinguishes between
#+ no param and a null param.
if [ "$2" ]
then
echo "-Parameter #2 is "$2".-"
fi
return 0
}
echo
echo "Nothing passed."
func2 # Called with no params
echo
echo "Zero-length parameter passed."
func2 "" # Called with zero-length param
echo
echo "Null parameter passed."
func2 "$uninitialized_param" # Called with uninitialized param
echo
echo "One parameter passed."
func2 first # Called with one param
Chapter 23. Functions 391](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-397-320.jpg)
![Advanced Bash-Scripting Guide
#+ then asks for a new value.
local local_var
echo -n "Enter a value "
eval 'echo -n "[$'$1'] "' # Previous value.
# eval echo -n "[$$1] " # Easier to understand,
#+ but loses trailing space in user prompt.
read local_var
[ -n "$local_var" ] && eval $1=$local_var
# "And-list": if "local_var" then set "$1" to its value.
}
echo
while [ "$icount" -le "$ITERATIONS" ]
do
my_read var
echo "Entry #$icount = $var"
let "icount += 1"
echo
done
# Thanks to Stephane Chazelas for providing this instructive example.
exit 0
Exit and Return
exit status
Functions return a value, called an exit status. This is analogous to the exit status returned by a
command. The exit status may be explicitly specified by a return statement, otherwise it is the exit
status of the last command in the function (0 if successful, and a non-zero error code if not). This exit
status may be used in the script by referencing it as $?. This mechanism effectively permits script
functions to have a "return value" similar to C functions.
return
Terminates a function. A return command [98] optionally takes an integer argument, which is
returned to the calling script as the "exit status" of the function, and this exit status is assigned to the
variable $?.
Example 23-7. Maximum of two numbers
#!/bin/bash
# max.sh: Maximum of two integers.
E_PARAM_ERR=250 # If less than 2 params passed to function.
EQUAL=251 # Return value if both params equal.
# Error values out of range of any
#+ params that might be fed to the function.
max2 () # Returns larger of two numbers.
{ # Note: numbers compared must be less than 257.
if [ -z "$2" ]
then
Chapter 23. Functions 394](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-400-320.jpg)
![Advanced Bash-Scripting Guide
return $E_PARAM_ERR
fi
if [ "$1" -eq "$2" ]
then
return $EQUAL
else
if [ "$1" -gt "$2" ]
then
return $1
else
return $2
fi
fi
}
max2 33 34
return_val=$?
if [ "$return_val" -eq $E_PARAM_ERR ]
then
echo "Need to pass two parameters to the function."
elif [ "$return_val" -eq $EQUAL ]
then
echo "The two numbers are equal."
else
echo "The larger of the two numbers is $return_val."
fi
exit 0
# Exercise (easy):
# ---------------
# Convert this to an interactive script,
#+ that is, have the script ask for input (two numbers).
For a function to return a string or array, use a dedicated variable.
count_lines_in_etc_passwd()
{
[[ -r /etc/passwd ]] && REPLY=$(echo $(wc -l < /etc/passwd))
# If /etc/passwd is readable, set REPLY to line count.
# Returns both a parameter value and status information.
# The 'echo' seems unnecessary, but . . .
#+ it removes excess whitespace from the output.
}
if count_lines_in_etc_passwd
then
echo "There are $REPLY lines in /etc/passwd."
else
echo "Cannot count lines in /etc/passwd."
fi
# Thanks, S.C.
Example 23-8. Converting numbers to Roman numerals
Chapter 23. Functions 395](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-401-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
# Arabic number to Roman numeral conversion
# Range: 0 - 200
# It's crude, but it works.
# Extending the range and otherwise improving the script is left as an exercise.
# Usage: roman number-to-convert
LIMIT=200
E_ARG_ERR=65
E_OUT_OF_RANGE=66
if [ -z "$1" ]
then
echo "Usage: `basename $0` number-to-convert"
exit $E_ARG_ERR
fi
num=$1
if [ "$num" -gt $LIMIT ]
then
echo "Out of range!"
exit $E_OUT_OF_RANGE
fi
to_roman () # Must declare function before first call to it.
{
number=$1
factor=$2
rchar=$3
let "remainder = number - factor"
while [ "$remainder" -ge 0 ]
do
echo -n $rchar
let "number -= factor"
let "remainder = number - factor"
done
return $number
# Exercises:
# ---------
# 1) Explain how this function works.
# Hint: division by successive subtraction.
# 2) Extend to range of the function.
# Hint: use "echo" and command-substitution capture.
}
to_roman $num 100 C
num=$?
to_roman $num 90 LXXXX
num=$?
to_roman $num 50 L
num=$?
to_roman $num 40 XL
num=$?
to_roman $num 10 X
num=$?
to_roman $num 9 IX
num=$?
Chapter 23. Functions 396](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-402-320.jpg)
![Advanced Bash-Scripting Guide
{
fvar=$1
Return_Val=$fvar
return # Returns 0 (success).
}
alt_return_test 1
echo $? # 0
echo "return value = $Return_Val" # 1
alt_return_test 256
echo "return value = $Return_Val" # 256
alt_return_test 257
echo "return value = $Return_Val" # 257
alt_return_test 25701
echo "return value = $Return_Val" #25701
A more elegant method is to have the function echo its "return value to stdout," and then
capture it by command substitution. See the discussion of this in Section 33.8.
Example 23-10. Comparing two large integers
#!/bin/bash
# max2.sh: Maximum of two LARGE integers.
# This is the previous "max.sh" example,
#+ modified to permit comparing large integers.
EQUAL=0 # Return value if both params equal.
E_PARAM_ERR=-99999 # Not enough params passed to function.
# ^^^^^^ Out of range of any params that might be passed.
max2 () # "Returns" larger of two numbers.
{
if [ -z "$2" ]
then
echo $E_PARAM_ERR
return
fi
if [ "$1" -eq "$2" ]
then
echo $EQUAL
return
else
if [ "$1" -gt "$2" ]
then
retval=$1
else
retval=$2
fi
fi
echo $retval # Echoes (to stdout), rather than returning value.
# Why?
}
Chapter 23. Functions 398](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-404-320.jpg)
![Advanced Bash-Scripting Guide
return_val=$(max2 33001 33997)
# ^^^^ Function name
# ^^^^^ ^^^^^ Params passed
# This is actually a form of command substitution:
#+ treating a function as if it were a command,
#+ and assigning the stdout of the function to the variable "return_val."
# ========================= OUTPUT ========================
if [ "$return_val" -eq "$E_PARAM_ERR" ]
then
echo "Error in parameters passed to comparison function!"
elif [ "$return_val" -eq "$EQUAL" ]
then
echo "The two numbers are equal."
else
echo "The larger of the two numbers is $return_val."
fi
# =========================================================
exit 0
# Exercises:
# ---------
# 1) Find a more elegant way of testing
#+ the parameters passed to the function.
# 2) Simplify the if/then structure at "OUTPUT."
# 3) Rewrite the script to take input from command-line parameters.
Here is another example of capturing a function "return value." Understanding it requires
some knowledge of awk.
month_length () # Takes month number as an argument.
{ # Returns number of days in month.
monthD="31 28 31 30 31 30 31 31 30 31 30 31" # Declare as local?
echo "$monthD" | awk '{ print $'"${1}"' }' # Tricky.
# ^^^^^^^^^
# Parameter passed to function ($1 -- month number), then to awk.
# Awk sees this as "print $1 . . . print $12" (depending on month number)
# Template for passing a parameter to embedded awk script:
# $'"${script_parameter}"'
# Needs error checking for correct parameter range (1-12)
#+ and for February in leap year.
}
# ----------------------------------------------
# Usage example:
month=4 # April, for example (4th month).
days_in=$(month_length $month)
echo $days_in # 30
# ----------------------------------------------
See also Example A-7 and Example A-37.
Exercise: Using what we have just learned, extend the previous Roman numerals
example to accept arbitrarily large input.
Redirection
Chapter 23. Functions 399](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-405-320.jpg)
![Advanced Bash-Scripting Guide
Redirecting the stdin of a function
A function is essentially a code block, which means its stdin can be redirected (as in Example 3-1).
Example 23-11. Real name from username
#!/bin/bash
# realname.sh
#
# From username, gets "real name" from /etc/passwd.
ARGCOUNT=1 # Expect one arg.
E_WRONGARGS=65
file=/etc/passwd
pattern=$1
if [ $# -ne "$ARGCOUNT" ]
then
echo "Usage: `basename $0` USERNAME"
exit $E_WRONGARGS
fi
file_excerpt () # Scan file for pattern,
{ #+ then print relevant portion of line.
while read line # "while" does not necessarily need [ condition ]
do
echo "$line" | grep $1 | awk -F":" '{ print $5 }'
# Have awk use ":" delimiter.
done
} <$file # Redirect into function's stdin.
file_excerpt $pattern
# Yes, this entire script could be reduced to
# grep PATTERN /etc/passwd | awk -F":" '{ print $5 }'
# or
# awk -F: '/PATTERN/ {print $5}'
# or
# awk -F: '($1 == "username") { print $5 }' # real name from username
# However, it might not be as instructive.
exit 0
There is an alternate, and perhaps less confusing method of redirecting a function's stdin. This
involves redirecting the stdin to an embedded bracketed code block within the function.
# Instead of:
Function ()
{
...
} < file
# Try this:
Function ()
{
{
...
} < file
}
Chapter 23. Functions 400](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-406-320.jpg)
![Advanced Bash-Scripting Guide
exit 0
# In contrast to C, a Bash variable declared inside a function
#+ is local *only* if declared as such.
Before a function is called, all variables declared within the function are invisible outside the
body of the function, not just those explicitly declared as local.
#!/bin/bash
func ()
{
global_var=37 # Visible only within the function block
#+ before the function has been called.
} # END OF FUNCTION
echo "global_var = $global_var" # global_var =
# Function "func" has not yet been called,
#+ so $global_var is not visible here.
func
echo "global_var = $global_var" # global_var = 37
# Has been set by function call.
23.2.1. Local variables and recursion.
Recursion is an interesting and sometimes useful form of self-reference. Herbert Mayer defines it as ". . .
expressing an algorithm by using a simpler version of that same algorithm . . ."
Consider a definition defined in terms of itself, [99] an expression implicit in its own expression, [100] a
snake swallowing its own tail, [101] or . . . a function that calls itself. [102]
Example 23-13. Demonstration of a simple recursive function
#!/bin/bash
# recursion-demo.sh
# Demonstration of recursion.
RECURSIONS=9 # How many times to recurse.
r_count=0 # Must be global. Why?
recurse ()
{
var="$1"
while [ "$var" -ge 0 ]
do
echo "Recursion count = "$r_count" +-+ $var = "$var""
(( var-- )); (( r_count++ ))
recurse "$var" # Function calls itself (recurses)
Chapter 23. Functions 402](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-408-320.jpg)
![Advanced Bash-Scripting Guide
done #+ until what condition is met?
}
recurse $RECURSIONS
exit $?
Example 23-14. Another simple demonstration
#!/bin/bash
# recursion-def.sh
# A script that defines "recursion" in a rather graphic way.
RECURSIONS=10
r_count=0
sp=" "
define_recursion ()
{
((r_count++))
sp="$sp"" "
echo -n "$sp"
echo ""The act of recurring ... "" # Per 1913 Webster's dictionary.
while [ $r_count -le $RECURSIONS ]
do
define_recursion
done
}
echo
echo "Recursion: "
define_recursion
echo
exit $?
Local variables are a useful tool for writing recursive code, but this practice generally involves a great deal of
computational overhead and is definitely not recommended in a shell script. [103]
Example 23-15. Recursion, using a local variable
#!/bin/bash
# factorial
# ---------
# Does bash permit recursion?
# Well, yes, but...
# It's so slow that you gotta have rocks in your head to try it.
MAX_ARG=5
E_WRONG_ARGS=85
E_RANGE_ERR=86
Chapter 23. Functions 403](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-409-320.jpg)
![Advanced Bash-Scripting Guide
if [ -z "$1" ]
then
echo "Usage: `basename $0` number"
exit $E_WRONG_ARGS
fi
if [ "$1" -gt $MAX_ARG ]
then
echo "Out of range ($MAX_ARG is maximum)."
# Let's get real now.
# If you want greater range than this,
#+ rewrite it in a Real Programming Language.
exit $E_RANGE_ERR
fi
fact ()
{
local number=$1
# Variable "number" must be declared as local,
#+ otherwise this doesn't work.
if [ "$number" -eq 0 ]
then
factorial=1 # Factorial of 0 = 1.
else
let "decrnum = number - 1"
fact $decrnum # Recursive function call (the function calls itself).
let "factorial = $number * $?"
fi
return $factorial
}
fact $1
echo "Factorial of $1 is $?."
exit 0
Also see Example A-15 for an example of recursion in a script. Be aware that recursion is resource-intensive
and executes slowly, and is therefore generally not appropriate in a script.
23.3. Recursion Without Local Variables
A function may recursively call itself even without use of local variables.
Example 23-16. The Fibonacci Sequence
#!/bin/bash
# fibo.sh : Fibonacci sequence (recursive)
# Author: M. Cooper
# License: GPL3
# ---------------------------------
# Fibo(0) = 0
# Fibo(1) = 1
# else
Chapter 23. Functions 404](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-410-320.jpg)
![Advanced Bash-Scripting Guide
# Fibo(j) = Fibo(j-1) + Fibo(j-2)
# ---------------------------------
MAXTERM=15 # Number of terms (+1) to generate.
MINIDX=2 # If idx is less than 2, then Fibo(idx) = idx.
Fibonacci ()
{
idx=$1 # Doesn't need to be local. Why not?
if [ "$idx" -lt "$MINIDX" ]
then
echo "$idx" # First two terms are 0 1 ... see above.
else
(( --idx )) # j-1
term1=$( Fibonacci $idx ) # Fibo(j-1)
(( --idx )) # j-2
term2=$( Fibonacci $idx ) # Fibo(j-2)
echo $(( term1 + term2 ))
fi
# An ugly, ugly kludge.
# The more elegant implementation of recursive fibo in C
#+ is a straightforward translation of the algorithm in lines 7 - 10.
}
for i in $(seq 0 $MAXTERM)
do # Calculate $MAXTERM+1 terms.
FIBO=$(Fibonacci $i)
echo -n "$FIBO "
done
# 0 1 1 2 3 5 8 13 21 34 55 89 144 233 377 610
# Takes a while, doesn't it? Recursion in a script is slow.
echo
exit 0
Example 23-17. The Towers of Hanoi
#! /bin/bash
#
# The Towers Of Hanoi
# Bash script
# Copyright (C) 2000 Amit Singh. All Rights Reserved.
# http://hanoi.kernelthread.com
#
# Tested under Bash version 2.05b.0(13)-release.
# Also works under Bash version 3.x.
#
# Used in "Advanced Bash Scripting Guide"
#+ with permission of script author.
# Slightly modified and commented by ABS author.
#=================================================================#
# The Tower of Hanoi is a mathematical puzzle attributed to
#+ Edouard Lucas, a nineteenth-century French mathematician.
#
# There are three vertical posts set in a base.
# The first post has a set of annular rings stacked on it.
Chapter 23. Functions 405](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-411-320.jpg)
![Chapter 24. Aliases
A Bash alias is essentially nothing more than a keyboard shortcut, an abbreviation, a means of avoiding
typing a long command sequence. If, for example, we include alias lm="ls -l | more" in the ~/.bashrc
file, then each lm [104] typed at the command-line will automatically be replaced by a ls -l | more. This can
save a great deal of typing at the command-line and avoid having to remember complex combinations of
commands and options. Setting alias rm="rm -i" (interactive mode delete) may save a good deal of grief,
since it can prevent inadvertently deleting important files.
In a script, aliases have very limited usefulness. It would be nice if aliases could assume some of the
functionality of the C preprocessor, such as macro expansion, but unfortunately Bash does not expand
arguments within the alias body. [105] Moreover, a script fails to expand an alias itself within "compound
constructs," such as if/then statements, loops, and functions. An added limitation is that an alias will not
expand recursively. Almost invariably, whatever we would like an alias to do could be accomplished much
more effectively with a function.
Example 24-1. Aliases within a script
#!/bin/bash
# alias.sh
shopt -s expand_aliases
# Must set this option, else script will not expand aliases.
# First, some fun.
alias Jesse_James='echo ""Alias Jesse James" was a 1959 comedy starring Bob Hope."'
Jesse_James
echo; echo; echo;
alias ll="ls -l"
# May use either single (') or double (") quotes to define an alias.
echo "Trying aliased "ll":"
ll /usr/X11R6/bin/mk* #* Alias works.
echo
directory=/usr/X11R6/bin/
prefix=mk* # See if wild card causes problems.
echo "Variables "directory" + "prefix" = $directory$prefix"
echo
alias lll="ls -l $directory$prefix"
echo "Trying aliased "lll":"
lll # Long listing of all files in /usr/X11R6/bin stating with mk.
# An alias can handle concatenated variables -- including wild card -- o.k.
TRUE=1
Chapter 24. Aliases 408](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-414-320.jpg)
![Advanced Bash-Scripting Guide
echo
if [ TRUE ]
then
alias rr="ls -l"
echo "Trying aliased "rr" within if/then statement:"
rr /usr/X11R6/bin/mk* #* Error message results!
# Aliases not expanded within compound statements.
echo "However, previously expanded alias still recognized:"
ll /usr/X11R6/bin/mk*
fi
echo
count=0
while [ $count -lt 3 ]
do
alias rrr="ls -l"
echo "Trying aliased "rrr" within "while" loop:"
rrr /usr/X11R6/bin/mk* #* Alias will not expand here either.
# alias.sh: line 57: rrr: command not found
let count+=1
done
echo; echo
alias xyz='cat $0' # Script lists itself.
# Note strong quotes.
xyz
# This seems to work,
#+ although the Bash documentation suggests that it shouldn't.
#
# However, as Steve Jacobson points out,
#+ the "$0" parameter expands immediately upon declaration of the alias.
exit 0
The unalias command removes a previously set alias.
Example 24-2. unalias: Setting and unsetting an alias
#!/bin/bash
# unalias.sh
shopt -s expand_aliases # Enables alias expansion.
alias llm='ls -al | more'
llm
echo
unalias llm # Unset alias.
llm
# Error message results, since 'llm' no longer recognized.
exit 0
bash$ ./unalias.sh
total 6
drwxrwxr-x 2 bozo bozo 3072 Feb 6 14:04 .
Chapter 24. Aliases 409](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-415-320.jpg)
![Chapter 25. List Constructs
The and list and or list constructs provide a means of processing a number of commands consecutively. These
can effectively replace complex nested if/then or even case statements.
Chaining together commands
and list
command-1 && command-2 && command-3 && ... command-n
Each command executes in turn, provided that the previous command has given a return value of
true (zero). At the first false (non-zero) return, the command chain terminates (the first command
returning false is the last one to execute).
Example 25-1. Using an and list to test for command-line arguments
#!/bin/bash
# and list
if [ ! -z "$1" ] && echo "Argument #1 = $1" && [ ! -z "$2" ] &&
# ^^ ^^ ^^
echo "Argument #2 = $2"
then
echo "At least 2 arguments passed to script."
# All the chained commands return true.
else
echo "Fewer than 2 arguments passed to script."
# At least one of the chained commands returns false.
fi
# Note that "if [ ! -z $1 ]" works, but its alleged equivalent,
# "if [ -n $1 ]" does not.
# However, quoting fixes this.
# if "[ -n "$1" ]" works.
# ^ ^ Careful!
# It is always best to QUOTE the variables being tested.
# This accomplishes the same thing, using "pure" if/then statements.
if [ ! -z "$1" ]
then
echo "Argument #1 = $1"
fi
if [ ! -z "$2" ]
then
echo "Argument #2 = $2"
echo "At least 2 arguments passed to script."
else
echo "Fewer than 2 arguments passed to script."
fi
# It's longer and more ponderous than using an "and list".
exit $?
Example 25-2. Another command-line arg test using an and list
Chapter 25. List Constructs 411](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-417-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
ARGS=1 # Number of arguments expected.
E_BADARGS=85 # Exit value if incorrect number of args passed.
test $# -ne $ARGS &&
# ^^^^^^^^^^^^ condition #1
echo "Usage: `basename $0` $ARGS argument(s)" && exit $E_BADARGS
# ^^
# If condition #1 tests true (wrong number of args passed to script),
#+ then the rest of the line executes, and script terminates.
# Line below executes only if the above test fails.
echo "Correct number of arguments passed to this script."
exit 0
# To check exit value, do a "echo $?" after script termination.
Of course, an and list can also set variables to a default value.
arg1=$@ && [ -z "$arg1" ] && arg1=DEFAULT
# Set $arg1 to command-line arguments, if any.
# But . . . set to DEFAULT if not specified on command-line.
or list
command-1 || command-2 || command-3 || ... command-n
Each command executes in turn for as long as the previous command returns false. At the first true
return, the command chain terminates (the first command returning true is the last one to execute).
This is obviously the inverse of the "and list".
Example 25-3. Using or lists in combination with an and list
#!/bin/bash
# delete.sh, a not-so-cunning file deletion utility.
# Usage: delete filename
E_BADARGS=85
if [ -z "$1" ]
then
echo "Usage: `basename $0` filename"
exit $E_BADARGS # No arg? Bail out.
else
file=$1 # Set filename.
fi
[ ! -f "$file" ] && echo "File "$file" not found.
Cowardly refusing to delete a nonexistent file."
# AND LIST, to give error message if file not present.
# Note echo message continuing on to a second line after an escape.
[ ! -f "$file" ] || (rm -f $file; echo "File "$file" deleted.")
# OR LIST, to delete file if present.
# Note logic inversion above.
Chapter 25. List Constructs 412](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-418-320.jpg)
![Advanced Bash-Scripting Guide
# AND LIST executes on true, OR LIST on false.
exit $?
If the first command in an or list returns true, it will execute.
# ==> The following snippets from the /etc/rc.d/init.d/single
#+==> script by Miquel van Smoorenburg
#+==> illustrate use of "and" and "or" lists.
# ==> "Arrowed" comments added by document author.
[ -x /usr/bin/clear ] && /usr/bin/clear
# ==> If /usr/bin/clear exists, then invoke it.
# ==> Checking for the existence of a command before calling it
#+==> avoids error messages and other awkward consequences.
# ==> . . .
# If they want to run something in single user mode, might as well run it...
for i in /etc/rc1.d/S[0-9][0-9]* ; do
# Check if the script is there.
[ -x "$i" ] || continue
# ==> If corresponding file in $PWD *not* found,
#+==> then "continue" by jumping to the top of the loop.
# Reject backup files and files generated by rpm.
case "$1" in
*.rpmsave|*.rpmorig|*.rpmnew|*~|*.orig)
continue;;
esac
[ "$i" = "/etc/rc1.d/S00single" ] && continue
# ==> Set script name, but don't execute it yet.
$i start
done
# ==> . . .
The exit status of an and list or an or list is the exit status of the last command executed.
Clever combinations of and and or lists are possible, but the logic may easily become convoluted and require
close attention to operator precedence rules, and possibly extensive debugging.
false && true || echo false # false
# Same result as
( false && true ) || echo false # false
# But NOT
false && ( true || echo false ) # (nothing echoed)
# Note left-to-right grouping and evaluation of statements,
#+ since the logic operators "&&" and "||" have equal precedence.
# It's usually best to avoid such complexities.
# Thanks, S.C.
See Example A-7 and Example 7-4 for illustrations of using and / or list constructs to test variables.
Chapter 25. List Constructs 413](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-419-320.jpg)
![Chapter 26. Arrays
Newer versions of Bash support one-dimensional arrays. Array elements may be initialized with the
variable[xx] notation. Alternatively, a script may introduce the entire array by an explicit declare -a
variable statement. To dereference (retrieve the contents of) an array element, use curly bracket notation,
that is, ${element[xx]}.
Example 26-1. Simple array usage
#!/bin/bash
area[11]=23
area[13]=37
area[51]=UFOs
# Array members need not be consecutive or contiguous.
# Some members of the array can be left uninitialized.
# Gaps in the array are okay.
# In fact, arrays with sparse data ("sparse arrays")
#+ are useful in spreadsheet-processing software.
echo -n "area[11] = "
echo ${area[11]} # {curly brackets} needed.
echo -n "area[13] = "
echo ${area[13]}
echo "Contents of area[51] are ${area[51]}."
# Contents of uninitialized array variable print blank (null variable).
echo -n "area[43] = "
echo ${area[43]}
echo "(area[43] unassigned)"
echo
# Sum of two array variables assigned to third
area[5]=`expr ${area[11]} + ${area[13]}`
echo "area[5] = area[11] + area[13]"
echo -n "area[5] = "
echo ${area[5]}
area[6]=`expr ${area[11]} + ${area[51]}`
echo "area[6] = area[11] + area[51]"
echo -n "area[6] = "
echo ${area[6]}
# This fails because adding an integer to a string is not permitted.
echo; echo; echo
# -----------------------------------------------------------------
# Another array, "area2".
Chapter 26. Arrays 414](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-420-320.jpg)
![Advanced Bash-Scripting Guide
# Another way of assigning array variables...
# array_name=( XXX YYY ZZZ ... )
area2=( zero one two three four )
echo -n "area2[0] = "
echo ${area2[0]}
# Aha, zero-based indexing (first element of array is [0], not [1]).
echo -n "area2[1] = "
echo ${area2[1]} # [1] is second element of array.
# -----------------------------------------------------------------
echo; echo; echo
# -----------------------------------------------
# Yet another array, "area3".
# Yet another way of assigning array variables...
# array_name=([xx]=XXX [yy]=YYY ...)
area3=([17]=seventeen [24]=twenty-four)
echo -n "area3[17] = "
echo ${area3[17]}
echo -n "area3[24] = "
echo ${area3[24]}
# -----------------------------------------------
exit 0
As we have seen, a convenient way of initializing an entire array is the array=( element1 element2
... elementN ) notation.
Bash permits array operations on variables, even if the variables are not explicitly declared as arrays.
string=abcABC123ABCabc
echo ${string[@]} # abcABC123ABCabc
echo ${string[*]} # abcABC123ABCabc
echo ${string[0]} # abcABC123ABCabc
echo ${string[1]} # No output!
# Why?
echo ${#string[@]} # 1
# One element in the array.
# The string itself.
# Thank you, Michael Zick, for pointing this out.
Once again this demonstrates that Bash variables are untyped.
Example 26-2. Formatting a poem
#!/bin/bash
# poem.sh: Pretty-prints one of the ABS Guide author's favorite poems.
# Lines of the poem (single stanza).
Line[1]="I do not know which to prefer,"
Chapter 26. Arrays 415](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-421-320.jpg)
![Advanced Bash-Scripting Guide
Line[2]="The beauty of inflections"
Line[3]="Or the beauty of innuendoes,"
Line[4]="The blackbird whistling"
Line[5]="Or just after."
# Note that quoting permits embedding whitespace.
# Attribution.
Attrib[1]=" Wallace Stevens"
Attrib[2]=""Thirteen Ways of Looking at a Blackbird""
# This poem is in the Public Domain (copyright expired).
echo
tput bold # Bold print.
for index in 1 2 3 4 5 # Five lines.
do
printf " %sn" "${Line[index]}"
done
for index in 1 2 # Two attribution lines.
do
printf " %sn" "${Attrib[index]}"
done
tput sgr0 # Reset terminal.
# See 'tput' docs.
echo
exit 0
# Exercise:
# --------
# Modify this script to pretty-print a poem from a text data file.
Array variables have a syntax all their own, and even standard Bash commands and operators have special
options adapted for array use.
Example 26-3. Various array operations
#!/bin/bash
# array-ops.sh: More fun with arrays.
array=( zero one two three four five )
# Element 0 1 2 3 4 5
echo ${array[0]} # zero
echo ${array:0} # zero
# Parameter expansion of first element,
#+ starting at position # 0 (1st character).
echo ${array:1} # ero
# Parameter expansion of first element,
#+ starting at position # 1 (2nd character).
echo "--------------"
echo ${#array[0]} # 4
Chapter 26. Arrays 416](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-422-320.jpg)
![Advanced Bash-Scripting Guide
# Length of first element of array.
echo ${#array} # 4
# Length of first element of array.
# (Alternate notation)
echo ${#array[1]} # 3
# Length of second element of array.
# Arrays in Bash have zero-based indexing.
echo ${#array[*]} # 6
# Number of elements in array.
echo ${#array[@]} # 6
# Number of elements in array.
echo "--------------"
array2=( [0]="first element" [1]="second element" [3]="fourth element" )
# ^ ^ ^ ^ ^ ^ ^ ^ ^
# Quoting permits embedding whitespace within individual array elements.
echo ${array2[0]} # first element
echo ${array2[1]} # second element
echo ${array2[2]} #
# Skipped in initialization, and therefore null.
echo ${array2[3]} # fourth element
echo ${#array2[0]} # 13 (length of first element)
echo ${#array2[*]} # 3 (number of elements in array)
exit
Many of the standard string operations work on arrays.
Example 26-4. String operations on arrays
#!/bin/bash
# array-strops.sh: String operations on arrays.
# Script by Michael Zick.
# Used in ABS Guide with permission.
# Fixups: 05 May 08, 04 Aug 08.
# In general, any string operation using the ${name ... } notation
#+ can be applied to all string elements in an array,
#+ with the ${name[@] ... } or ${name[*] ...} notation.
arrayZ=( one two three four five five )
echo
# Trailing Substring Extraction
echo ${arrayZ[@]:0} # one two three four five five
# ^ All elements.
echo ${arrayZ[@]:1} # two three four five five
# ^ All elements following element[0].
echo ${arrayZ[@]:1:2} # two three
# ^ Only the two elements after element[0].
Chapter 26. Arrays 417](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-423-320.jpg)
![Advanced Bash-Scripting Guide
echo "---------"
# Substring Removal
# Removes shortest match from front of string(s).
echo ${arrayZ[@]#f*r} # one two three five five
# ^ # Applied to all elements of the array.
# Matches "four" and removes it.
# Longest match from front of string(s)
echo ${arrayZ[@]##t*e} # one two four five five
# ^^ # Applied to all elements of the array.
# Matches "three" and removes it.
# Shortest match from back of string(s)
echo ${arrayZ[@]%h*e} # one two t four five five
# ^ # Applied to all elements of the array.
# Matches "hree" and removes it.
# Longest match from back of string(s)
echo ${arrayZ[@]%%t*e} # one two four five five
# ^^ # Applied to all elements of the array.
# Matches "three" and removes it.
echo "----------------------"
# Substring Replacement
# Replace first occurrence of substring with replacement.
echo ${arrayZ[@]/fiv/XYZ} # one two three four XYZe XYZe
# ^ # Applied to all elements of the array.
# Replace all occurrences of substring.
echo ${arrayZ[@]//iv/YY} # one two three four fYYe fYYe
# Applied to all elements of the array.
# Delete all occurrences of substring.
# Not specifing a replacement defaults to 'delete' ...
echo ${arrayZ[@]//fi/} # one two three four ve ve
# ^^ # Applied to all elements of the array.
# Replace front-end occurrences of substring.
echo ${arrayZ[@]/#fi/XY} # one two three four XYve XYve
# ^ # Applied to all elements of the array.
# Replace back-end occurrences of substring.
echo ${arrayZ[@]/%ve/ZZ} # one two three four fiZZ fiZZ
# ^ # Applied to all elements of the array.
echo ${arrayZ[@]/%o/XX} # one twXX three four five five
# ^ # Why?
echo "-----------------------------"
replacement() {
echo -n "!!!"
}
Chapter 26. Arrays 418](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-424-320.jpg)
![Advanced Bash-Scripting Guide
echo ${arrayZ[@]/%e/$(replacement)}
# ^ ^^^^^^^^^^^^^^
# on!!! two thre!!! four fiv!!! fiv!!!
# The stdout of replacement() is the replacement string.
# Q.E.D: The replacement action is, in effect, an 'assignment.'
echo "------------------------------------"
# Accessing the "for-each":
echo ${arrayZ[@]//*/$(replacement optional_arguments)}
# ^^ ^^^^^^^^^^^^^
# !!! !!! !!! !!! !!! !!!
# Now, if Bash would only pass the matched string
#+ to the function being called . . .
echo
exit 0
# Before reaching for a Big Hammer -- Perl, Python, or all the rest --
# recall:
# $( ... ) is command substitution.
# A function runs as a sub-process.
# A function writes its output (if echo-ed) to stdout.
# Assignment, in conjunction with "echo" and command substitution,
#+ can read a function's stdout.
# The name[@] notation specifies (the equivalent of) a "for-each"
#+ operation.
# Bash is more powerful than you think!
Command substitution can construct the individual elements of an array.
Example 26-5. Loading the contents of a script into an array
#!/bin/bash
# script-array.sh: Loads this script into an array.
# Inspired by an e-mail from Chris Martin (thanks!).
script_contents=( $(cat "$0") ) # Stores contents of this script ($0)
#+ in an array.
for element in $(seq 0 $((${#script_contents[@]} - 1)))
do # ${#script_contents[@]}
#+ gives number of elements in the array.
#
# Question:
# Why is seq 0 necessary?
# Try changing it to seq 1.
echo -n "${script_contents[$element]}"
# List each field of this script on a single line.
# echo -n "${script_contents[element]}" also works because of ${ ... }.
echo -n " -- " # Use " -- " as a field separator.
done
echo
exit 0
# Exercise:
Chapter 26. Arrays 419](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-425-320.jpg)
![Advanced Bash-Scripting Guide
# --------
# Modify this script so it lists itself
#+ in its original format,
#+ complete with whitespace, line breaks, etc.
In an array context, some Bash builtins have a slightly altered meaning. For example, unset deletes array
elements, or even an entire array.
Example 26-6. Some special properties of arrays
#!/bin/bash
declare -a colors
# All subsequent commands in this script will treat
#+ the variable "colors" as an array.
echo "Enter your favorite colors (separated from each other by a space)."
read -a colors # Enter at least 3 colors to demonstrate features below.
# Special option to 'read' command,
#+ allowing assignment of elements in an array.
echo
element_count=${#colors[@]}
# Special syntax to extract number of elements in array.
# element_count=${#colors[*]} works also.
#
# The "@" variable allows word splitting within quotes
#+ (extracts variables separated by whitespace).
#
# This corresponds to the behavior of "$@" and "$*"
#+ in positional parameters.
index=0
while [ "$index" -lt "$element_count" ]
do # List all the elements in the array.
echo ${colors[$index]}
# ${colors[index]} also works because it's within ${ ... } brackets.
let "index = $index + 1"
# Or:
# ((index++))
done
# Each array element listed on a separate line.
# If this is not desired, use echo -n "${colors[$index]} "
#
# Doing it with a "for" loop instead:
# for i in "${colors[@]}"
# do
# echo "$i"
# done
# (Thanks, S.C.)
echo
# Again, list all the elements in the array, but using a more elegant method.
echo ${colors[@]} # echo ${colors[*]} also works.
Chapter 26. Arrays 420](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-426-320.jpg)
![Advanced Bash-Scripting Guide
echo
# The "unset" command deletes elements of an array, or entire array.
unset colors[1] # Remove 2nd element of array.
# Same effect as colors[1]=
echo ${colors[@]} # List array again, missing 2nd element.
unset colors # Delete entire array.
# unset colors[*] and
#+ unset colors[@] also work.
echo; echo -n "Colors gone."
echo ${colors[@]} # List array again, now empty.
exit 0
As seen in the previous example, either ${array_name[@]} or ${array_name[*]} refers to all the elements
of the array. Similarly, to get a count of the number of elements in an array, use either ${#array_name[@]}
or ${#array_name[*]}. ${#array_name} is the length (number of characters) of ${array_name[0]}, the first
element of the array.
Example 26-7. Of empty arrays and empty elements
#!/bin/bash
# empty-array.sh
# Thanks to Stephane Chazelas for the original example,
#+ and to Michael Zick and Omair Eshkenazi, for extending it.
# And to Nathan Coulter for clarifications and corrections.
# An empty array is not the same as an array with empty elements.
array0=( first second third )
array1=( '' ) # "array1" consists of one empty element.
array2=( ) # No elements . . . "array2" is empty.
array3=( ) # What about this array?
echo
ListArray()
{
echo
echo "Elements in array0: ${array0[@]}"
echo "Elements in array1: ${array1[@]}"
echo "Elements in array2: ${array2[@]}"
echo "Elements in array3: ${array3[@]}"
echo
echo "Length of first element in array0 = ${#array0}"
echo "Length of first element in array1 = ${#array1}"
echo "Length of first element in array2 = ${#array2}"
echo "Length of first element in array3 = ${#array3}"
echo
echo "Number of elements in array0 = ${#array0[*]}" # 3
echo "Number of elements in array1 = ${#array1[*]}" # 1 (Surprise!)
echo "Number of elements in array2 = ${#array2[*]}" # 0
echo "Number of elements in array3 = ${#array3[*]}" # 0
}
Chapter 26. Arrays 421](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-427-320.jpg)
![Advanced Bash-Scripting Guide
# ===================================================================
ListArray
# Try extending those arrays.
# Adding an element to an array.
array0=( "${array0[@]}" "new1" )
array1=( "${array1[@]}" "new1" )
array2=( "${array2[@]}" "new1" )
array3=( "${array3[@]}" "new1" )
ListArray
# or
array0[${#array0[*]}]="new2"
array1[${#array1[*]}]="new2"
array2[${#array2[*]}]="new2"
array3[${#array3[*]}]="new2"
ListArray
# When extended as above, arrays are 'stacks' ...
# Above is the 'push' ...
# The stack 'height' is:
height=${#array2[@]}
echo
echo "Stack height for array2 = $height"
# The 'pop' is:
unset array2[${#array2[@]}-1] # Arrays are zero-based,
height=${#array2[@]} #+ which means first element has index 0.
echo
echo "POP"
echo "New stack height for array2 = $height"
ListArray
# List only 2nd and 3rd elements of array0.
from=1 # Zero-based numbering.
to=2
array3=( ${array0[@]:1:2} )
echo
echo "Elements in array3: ${array3[@]}"
# Works like a string (array of characters).
# Try some other "string" forms.
# Replacement:
array4=( ${array0[@]/second/2nd} )
echo
echo "Elements in array4: ${array4[@]}"
# Replace all matching wildcarded string.
array5=( ${array0[@]//new?/old} )
echo
echo "Elements in array5: ${array5[@]}"
# Just when you are getting the feel for this . . .
array6=( ${array0[@]#*new} )
echo # This one might surprise you.
echo "Elements in array6: ${array6[@]}"
Chapter 26. Arrays 422](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-428-320.jpg)
![Advanced Bash-Scripting Guide
array7=( ${array0[@]#new1} )
echo # After array6 this should not be a surprise.
echo "Elements in array7: ${array7[@]}"
# Which looks a lot like . . .
array8=( ${array0[@]/new1/} )
echo
echo "Elements in array8: ${array8[@]}"
# So what can one say about this?
# The string operations are performed on
#+ each of the elements in var[@] in succession.
# Therefore : Bash supports string vector operations.
# If the result is a zero length string,
#+ that element disappears in the resulting assignment.
# However, if the expansion is in quotes, the null elements remain.
# Michael Zick: Question, are those strings hard or soft quotes?
# Nathan Coulter: There is no such thing as "soft quotes."
#! What's really happening is that
#!+ the pattern matching happens after
#!+ all the other expansions of [word]
#!+ in cases like ${parameter#word}.
zap='new*'
array9=( ${array0[@]/$zap/} )
echo
echo "Number of elements in array9: ${#array9[@]}"
array9=( "${array0[@]/$zap/}" )
echo "Elements in array9: ${array9[@]}"
# This time the null elements remain.
echo "Number of elements in array9: ${#array9[@]}"
# Just when you thought you were still in Kansas . . .
array10=( ${array0[@]#$zap} )
echo
echo "Elements in array10: ${array10[@]}"
# But, the asterisk in zap won't be interpreted if quoted.
array10=( ${array0[@]#"$zap"} )
echo
echo "Elements in array10: ${array10[@]}"
# Well, maybe we _are_ still in Kansas . . .
# (Revisions to above code block by Nathan Coulter.)
# Compare array7 with array10.
# Compare array8 with array9.
# Reiterating: No such thing as soft quotes!
# Nathan Coulter explains:
# Pattern matching of 'word' in ${parameter#word} is done after
#+ parameter expansion and *before* quote removal.
# In the normal case, pattern matching is done *after* quote removal.
exit
The relationship of ${array_name[@]} and ${array_name[*]} is analogous to that between $@ and $*. This
powerful array notation has a number of uses.
Chapter 26. Arrays 423](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-429-320.jpg)
![Advanced Bash-Scripting Guide
# Copying an array.
array2=( "${array1[@]}" )
# or
array2="${array1[@]}"
#
# However, this fails with "sparse" arrays,
#+ arrays with holes (missing elements) in them,
#+ as Jochen DeSmet points out.
# ------------------------------------------
array1[0]=0
# array1[1] not assigned
array1[2]=2
array2=( "${array1[@]}" ) # Copy it?
echo ${array2[0]} # 0
echo ${array2[2]} # (null), should be 2
# ------------------------------------------
# Adding an element to an array.
array=( "${array[@]}" "new element" )
# or
array[${#array[*]}]="new element"
# Thanks, S.C.
The array=( element1 element2 ... elementN ) initialization operation, with the help of command
substitution, makes it possible to load the contents of a text file into an array.
#!/bin/bash
filename=sample_file
# cat sample_file
#
# 1 a b c
# 2 d e fg
declare -a array1
array1=( `cat "$filename"`) # Loads contents
# List file to stdout #+ of $filename into array1.
#
# array1=( `cat "$filename" | tr 'n' ' '`)
# change linefeeds in file to spaces.
# Not necessary because Bash does word splitting,
#+ changing linefeeds to spaces.
echo ${array1[@]} # List the array.
# 1 a b c 2 d e fg
#
# Each whitespace-separated "word" in the file
#+ has been assigned to an element of the array.
element_count=${#array1[*]}
echo $element_count # 8
Clever scripting makes it possible to add array operations.
Chapter 26. Arrays 424](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-430-320.jpg)
![Advanced Bash-Scripting Guide
Example 26-8. Initializing arrays
#! /bin/bash
# array-assign.bash
# Array operations are Bash-specific,
#+ hence the ".bash" in the script name.
# Copyright (c) Michael S. Zick, 2003, All rights reserved.
# License: Unrestricted reuse in any form, for any purpose.
# Version: $ID$
#
# Clarification and additional comments by William Park.
# Based on an example provided by Stephane Chazelas
#+ which appeared in an earlier version of the
#+ Advanced Bash Scripting Guide.
# Output format of the 'times' command:
# User CPU <space> System CPU
# User CPU of dead children <space> System CPU of dead children
# Bash has two versions of assigning all elements of an array
#+ to a new array variable.
# Both drop 'null reference' elements
#+ in Bash versions 2.04 and later.
# An additional array assignment that maintains the relationship of
#+ [subscript]=value for arrays may be added to newer versions.
# Constructs a large array using an internal command,
#+ but anything creating an array of several thousand elements
#+ will do just fine.
declare -a bigOne=( /dev/* ) # All the files in /dev . . .
echo
echo 'Conditions: Unquoted, default IFS, All-Elements-Of'
echo "Number of elements in array is ${#bigOne[@]}"
# set -vx
echo
echo '- - testing: =( ${array[@]} ) - -'
times
declare -a bigTwo=( ${bigOne[@]} )
# Note parens: ^ ^
times
echo
echo '- - testing: =${array[@]} - -'
times
declare -a bigThree=${bigOne[@]}
# No parentheses this time.
times
# Comparing the numbers shows that the second form, pointed out
#+ by Stephane Chazelas, is faster.
#
# As William Park explains:
#+ The bigTwo array assigned element by element (because of parentheses),
Chapter 26. Arrays 425](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-431-320.jpg)
![Advanced Bash-Scripting Guide
#+ whereas bigThree assigned as a single string.
# So, in essence, you have:
# bigTwo=( [0]="..." [1]="..." [2]="..." ... )
# bigThree=( [0]="... ... ..." )
#
# Verify this by: echo ${bigTwo[0]}
# echo ${bigThree[0]}
# I will continue to use the first form in my example descriptions
#+ because I think it is a better illustration of what is happening.
# The reusable portions of my examples will actual contain
#+ the second form where appropriate because of the speedup.
# MSZ: Sorry about that earlier oversight folks.
# Note:
# ----
# The "declare -a" statements in lines 32 and 44
#+ are not strictly necessary, since it is implicit
#+ in the Array=( ... ) assignment form.
# However, eliminating these declarations slows down
#+ the execution of the following sections of the script.
# Try it, and see.
exit 0
Adding a superfluous declare -a statement to an array declaration may speed up execution of subsequent
operations on the array.
Example 26-9. Copying and concatenating arrays
#! /bin/bash
# CopyArray.sh
#
# This script written by Michael Zick.
# Used here with permission.
# How-To "Pass by Name & Return by Name"
#+ or "Building your own assignment statement".
CpArray_Mac() {
# Assignment Command Statement Builder
echo -n 'eval '
echo -n "$2" # Destination name
echo -n '=( ${'
echo -n "$1" # Source name
echo -n '[@]} )'
# That could all be a single command.
# Matter of style only.
}
declare -f CopyArray # Function "Pointer"
Chapter 26. Arrays 426](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-432-320.jpg)
![Advanced Bash-Scripting Guide
CopyArray=CpArray_Mac # Statement Builder
Hype()
{
# Hype the array named $1.
# (Splice it together with array containing "Really Rocks".)
# Return in array named $2.
local -a TMP
local -a hype=( Really Rocks )
$($CopyArray $1 TMP)
TMP=( ${TMP[@]} ${hype[@]} )
$($CopyArray TMP $2)
}
declare -a before=( Advanced Bash Scripting )
declare -a after
echo "Array Before = ${before[@]}"
Hype before after
echo "Array After = ${after[@]}"
# Too much hype?
echo "What ${after[@]:3:2}?"
declare -a modest=( ${after[@]:2:1} ${after[@]:3:2} )
# ---- substring extraction ----
echo "Array Modest = ${modest[@]}"
# What happened to 'before' ?
echo "Array Before = ${before[@]}"
exit 0
Example 26-10. More on concatenating arrays
#! /bin/bash
# array-append.bash
# Copyright (c) Michael S. Zick, 2003, All rights reserved.
# License: Unrestricted reuse in any form, for any purpose.
# Version: $ID$
#
# Slightly modified in formatting by M.C.
# Array operations are Bash-specific.
# Legacy UNIX /bin/sh lacks equivalents.
# Pipe the output of this script to 'more'
#+ so it doesn't scroll off the terminal.
# Or, redirect output to a file.
Chapter 26. Arrays 427](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-433-320.jpg)
![Advanced Bash-Scripting Guide
declare -a array1=( zero1 one1 two1 )
# Subscript packed.
declare -a array2=( [0]=zero2 [2]=two2 [3]=three2 )
# Subscript sparse -- [1] is not defined.
echo
echo '- Confirm that the array is really subscript sparse. -'
echo "Number of elements: 4" # Hard-coded for illustration.
for (( i = 0 ; i < 4 ; i++ ))
do
echo "Element [$i]: ${array2[$i]}"
done
# See also the more general code example in basics-reviewed.bash.
declare -a dest
# Combine (append) two arrays into a third array.
echo
echo 'Conditions: Unquoted, default IFS, All-Elements-Of operator'
echo '- Undefined elements not present, subscripts not maintained. -'
# # The undefined elements do not exist; they are not being dropped.
dest=( ${array1[@]} ${array2[@]} )
# dest=${array1[@]}${array2[@]} # Strange results, possibly a bug.
# Now, list the result.
echo
echo '- - Testing Array Append - -'
cnt=${#dest[@]}
echo "Number of elements: $cnt"
for (( i = 0 ; i < cnt ; i++ ))
do
echo "Element [$i]: ${dest[$i]}"
done
# Assign an array to a single array element (twice).
dest[0]=${array1[@]}
dest[1]=${array2[@]}
# List the result.
echo
echo '- - Testing modified array - -'
cnt=${#dest[@]}
echo "Number of elements: $cnt"
for (( i = 0 ; i < cnt ; i++ ))
do
echo "Element [$i]: ${dest[$i]}"
done
# Examine the modified second element.
echo
echo '- - Reassign and list second element - -'
declare -a subArray=${dest[1]}
cnt=${#subArray[@]}
echo "Number of elements: $cnt"
for (( i = 0 ; i < cnt ; i++ ))
Chapter 26. Arrays 428](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-434-320.jpg)
![Advanced Bash-Scripting Guide
do
echo "Element [$i]: ${subArray[$i]}"
done
# The assignment of an entire array to a single element
#+ of another array using the '=${ ... }' array assignment
#+ has converted the array being assigned into a string,
#+ with the elements separated by a space (the first character of IFS).
# If the original elements didn't contain whitespace . . .
# If the original array isn't subscript sparse . . .
# Then we could get the original array structure back again.
# Restore from the modified second element.
echo
echo '- - Listing restored element - -'
declare -a subArray=( ${dest[1]} )
cnt=${#subArray[@]}
echo "Number of elements: $cnt"
for (( i = 0 ; i < cnt ; i++ ))
do
echo "Element [$i]: ${subArray[$i]}"
done
echo '- - Do not depend on this behavior. - -'
echo '- - This behavior is subject to change - -'
echo '- - in versions of Bash newer than version 2.05b - -'
# MSZ: Sorry about any earlier confusion folks.
exit 0
--
Arrays permit deploying old familiar algorithms as shell scripts. Whether this is necessarily a good idea is left
for the reader to decide.
Example 26-11. The Bubble Sort
#!/bin/bash
# bubble.sh: Bubble sort, of sorts.
# Recall the algorithm for a bubble sort. In this particular version...
# With each successive pass through the array to be sorted,
#+ compare two adjacent elements, and swap them if out of order.
# At the end of the first pass, the "heaviest" element has sunk to bottom.
# At the end of the second pass, the next "heaviest" one has sunk next to bottom.
# And so forth.
# This means that each successive pass needs to traverse less of the array.
# You will therefore notice a speeding up in the printing of the later passes.
exchange()
{
# Swaps two members of the array.
local temp=${Countries[$1]} # Temporary storage
#+ for element getting swapped out.
Chapter 26. Arrays 429](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-435-320.jpg)
![Advanced Bash-Scripting Guide
Countries[$1]=${Countries[$2]}
Countries[$2]=$temp
return
}
declare -a Countries # Declare array,
#+ optional here since it's initialized below.
# Is it permissable to split an array variable over multiple lines
#+ using an escape ()?
# Yes.
Countries=(Netherlands Ukraine Zaire Turkey Russia Yemen Syria
Brazil Argentina Nicaragua Japan Mexico Venezuela Greece England
Israel Peru Canada Oman Denmark Wales France Kenya
Xanadu Qatar Liechtenstein Hungary)
# "Xanadu" is the mythical place where, according to Coleridge,
#+ Kubla Khan did a pleasure dome decree.
clear # Clear the screen to start with.
echo "0: ${Countries[*]}" # List entire array at pass 0.
number_of_elements=${#Countries[@]}
let "comparisons = $number_of_elements - 1"
count=1 # Pass number.
while [ "$comparisons" -gt 0 ] # Beginning of outer loop
do
index=0 # Reset index to start of array after each pass.
while [ "$index" -lt "$comparisons" ] # Beginning of inner loop
do
if [ ${Countries[$index]} > ${Countries[`expr $index + 1`]} ]
# If out of order...
# Recalling that > is ASCII comparison operator
#+ within single brackets.
# if [[ ${Countries[$index]} > ${Countries[`expr $index + 1`]} ]]
#+ also works.
then
exchange $index `expr $index + 1` # Swap.
fi
let "index += 1" # Or, index+=1 on Bash, ver. 3.1 or newer.
done # End of inner loop
# ----------------------------------------------------------------------
# Paulo Marcel Coelho Aragao suggests for-loops as a simpler altenative.
#
# for (( last = $number_of_elements - 1 ; last > 0 ; last-- ))
## Fix by C.Y. Hunt ^ (Thanks!)
# do
# for (( i = 0 ; i < last ; i++ ))
# do
# [[ "${Countries[$i]}" > "${Countries[$((i+1))]}" ]]
# && exchange $i $((i+1))
# done
Chapter 26. Arrays 430](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-436-320.jpg)
![Advanced Bash-Scripting Guide
# done
# ----------------------------------------------------------------------
let "comparisons -= 1" # Since "heaviest" element bubbles to bottom,
#+ we need do one less comparison each pass.
echo
echo "$count: ${Countries[@]}" # Print resultant array at end of each pass.
echo
let "count += 1" # Increment pass count.
done # End of outer loop
# All done.
exit 0
--
Is it possible to nest arrays within arrays?
#!/bin/bash
# "Nested" array.
# Michael Zick provided this example,
#+ with corrections and clarifications by William Park.
AnArray=( $(ls --inode --ignore-backups --almost-all
--directory --full-time --color=none --time=status
--sort=time -l ${PWD} ) ) # Commands and options.
# Spaces are significant . . . and don't quote anything in the above.
SubArray=( ${AnArray[@]:11:1} ${AnArray[@]:6:5} )
# This array has six elements:
#+ SubArray=( [0]=${AnArray[11]} [1]=${AnArray[6]} [2]=${AnArray[7]}
# [3]=${AnArray[8]} [4]=${AnArray[9]} [5]=${AnArray[10]} )
#
# Arrays in Bash are (circularly) linked lists
#+ of type string (char *).
# So, this isn't actually a nested array,
#+ but it's functionally similar.
echo "Current directory and date of last status change:"
echo "${SubArray[@]}"
exit 0
--
Embedded arrays in combination with indirect references create some fascinating possibilities
Example 26-12. Embedded arrays and indirect references
#!/bin/bash
# embedded-arrays.sh
# Embedded arrays and indirect references.
Chapter 26. Arrays 431](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-437-320.jpg)
![Advanced Bash-Scripting Guide
# This script by Dennis Leeuw.
# Used with permission.
# Modified by document author.
ARRAY1=(
VAR1_1=value11
VAR1_2=value12
VAR1_3=value13
)
ARRAY2=(
VARIABLE="test"
STRING="VAR1=value1 VAR2=value2 VAR3=value3"
ARRAY21=${ARRAY1[*]}
) # Embed ARRAY1 within this second array.
function print () {
OLD_IFS="$IFS"
IFS=$'n' # To print each array element
#+ on a separate line.
TEST1="ARRAY2[*]"
local ${!TEST1} # See what happens if you delete this line.
# Indirect reference.
# This makes the components of $TEST1
#+ accessible to this function.
# Let's see what we've got so far.
echo
echo "$TEST1 = $TEST1" # Just the name of the variable.
echo; echo
echo "{$TEST1} = ${!TEST1}" # Contents of the variable.
# That's what an indirect
#+ reference does.
echo
echo "-------------------------------------------"; echo
echo
# Print variable
echo "Variable VARIABLE: $VARIABLE"
# Print a string element
IFS="$OLD_IFS"
TEST2="STRING[*]"
local ${!TEST2} # Indirect reference (as above).
echo "String element VAR2: $VAR2 from STRING"
# Print an array element
TEST2="ARRAY21[*]"
local ${!TEST2} # Indirect reference (as above).
echo "Array element VAR1_1: $VAR1_1 from ARRAY21"
}
print
echo
exit 0
# As the author of the script notes,
#+ "you can easily expand it to create named-hashes in bash."
Chapter 26. Arrays 432](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-438-320.jpg)
![Advanced Bash-Scripting Guide
# (Difficult) exercise for the reader: implement this.
--
Arrays enable implementing a shell script version of the Sieve of Eratosthenes. Of course, a resource-intensive
application of this nature should really be written in a compiled language, such as C. It runs excruciatingly
slowly as a script.
Example 26-13. The Sieve of Eratosthenes
#!/bin/bash
# sieve.sh (ex68.sh)
# Sieve of Eratosthenes
# Ancient algorithm for finding prime numbers.
# This runs a couple of orders of magnitude slower
#+ than the equivalent program written in C.
LOWER_LIMIT=1 # Starting with 1.
UPPER_LIMIT=1000 # Up to 1000.
# (You may set this higher . . . if you have time on your hands.)
PRIME=1
NON_PRIME=0
let SPLIT=UPPER_LIMIT/2
# Optimization:
# Need to test numbers only halfway to upper limit. Why?
declare -a Primes
# Primes[] is an array.
initialize ()
{
# Initialize the array.
i=$LOWER_LIMIT
until [ "$i" -gt "$UPPER_LIMIT" ]
do
Primes[i]=$PRIME
let "i += 1"
done
# Assume all array members guilty (prime)
#+ until proven innocent.
}
print_primes ()
{
# Print out the members of the Primes[] array tagged as prime.
i=$LOWER_LIMIT
until [ "$i" -gt "$UPPER_LIMIT" ]
do
if [ "${Primes[i]}" -eq "$PRIME" ]
Chapter 26. Arrays 433](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-439-320.jpg)
![Advanced Bash-Scripting Guide
then
printf "%8d" $i
# 8 spaces per number gives nice, even columns.
fi
let "i += 1"
done
}
sift () # Sift out the non-primes.
{
let i=$LOWER_LIMIT+1
# Let's start with 2.
until [ "$i" -gt "$UPPER_LIMIT" ]
do
if [ "${Primes[i]}" -eq "$PRIME" ]
# Don't bother sieving numbers already sieved (tagged as non-prime).
then
t=$i
while [ "$t" -le "$UPPER_LIMIT" ]
do
let "t += $i "
Primes[t]=$NON_PRIME
# Tag as non-prime all multiples.
done
fi
let "i += 1"
done
}
# ==============================================
# main ()
# Invoke the functions sequentially.
initialize
sift
print_primes
# This is what they call structured programming.
# ==============================================
echo
exit 0
# -------------------------------------------------------- #
# Code below line will not execute, because of 'exit.'
# This improved version of the Sieve, by Stephane Chazelas,
#+ executes somewhat faster.
Chapter 26. Arrays 434](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-440-320.jpg)
![Advanced Bash-Scripting Guide
# Must invoke with command-line argument (limit of primes).
UPPER_LIMIT=$1 # From command-line.
let SPLIT=UPPER_LIMIT/2 # Halfway to max number.
Primes=( '' $(seq $UPPER_LIMIT) )
i=1
until (( ( i += 1 ) > SPLIT )) # Need check only halfway.
do
if [[ -n $Primes[i] ]]
then
t=$i
until (( ( t += i ) > UPPER_LIMIT ))
do
Primes[t]=
done
fi
done
echo ${Primes[*]}
exit $?
Example 26-14. The Sieve of Eratosthenes, Optimized
#!/bin/bash
# Optimized Sieve of Eratosthenes
# Script by Jared Martin, with very minor changes by ABS Guide author.
# Used in ABS Guide with permission (thanks!).
# Based on script in Advanced Bash Scripting Guide.
# http://tldp.org/LDP/abs/html/arrays.html#PRIMES0 (ex68.sh).
# http://www.cs.hmc.edu/~oneill/papers/Sieve-JFP.pdf (reference)
# Check results against http://primes.utm.edu/lists/small/1000.txt
# Necessary but not sufficient would be, e.g.,
# (($(sieve 7919 | wc -w) == 1000)) && echo "7919 is the 1000th prime"
UPPER_LIMIT=${1:?"Need an upper limit of primes to search."}
Primes=( '' $(seq ${UPPER_LIMIT}) )
typeset -i i t
Primes[i=1]='' # 1 is not a prime.
until (( ( i += 1 ) > (${UPPER_LIMIT}/i) )) # Need check only ith-way.
do # Why?
if ((${Primes[t=i*(i-1), i]}))
# Obscure, but instructive, use of arithmetic expansion in subscript.
then
until (( ( t += i ) > ${UPPER_LIMIT} ))
do Primes[t]=; done
fi
done
# echo ${Primes[*]}
echo # Change to original script for pretty-printing (80-col. display).
printf "%8d" ${Primes[*]}
echo; echo
Chapter 26. Arrays 435](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-441-320.jpg)
![Advanced Bash-Scripting Guide
exit $?
Compare these array-based prime number generators with alternatives that do not use arrays, Example A-15,
and Example 15-46.
--
Arrays lend themselves, to some extent, to emulating data structures for which Bash has no native support.
Example 26-15. Emulating a push-down stack
#!/bin/bash
# stack.sh: push-down stack simulation
# Similar to the CPU stack, a push-down stack stores data items
#+ sequentially, but releases them in reverse order, last-in first-out.
BP=100 # Base Pointer of stack array.
# Begin at element 100.
SP=$BP # Stack Pointer.
# Initialize it to "base" (bottom) of stack.
Data= # Contents of stack location.
# Must use global variable,
#+ because of limitation on function return range.
# 100 Base pointer <-- Base Pointer
# 99 First data item
# 98 Second data item
# ... More data
# Last data item <-- Stack pointer
declare -a stack
push() # Push item on stack.
{
if [ -z "$1" ] # Nothing to push?
then
return
fi
let "SP -= 1" # Bump stack pointer.
stack[$SP]=$1
return
}
pop() # Pop item off stack.
{
Data= # Empty out data item.
if [ "$SP" -eq "$BP" ] # Stack empty?
then
Chapter 26. Arrays 436](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-442-320.jpg)
![Advanced Bash-Scripting Guide
return
fi # This also keeps SP from getting past 100,
#+ i.e., prevents a runaway stack.
Data=${stack[$SP]}
let "SP += 1" # Bump stack pointer.
return
}
status_report() # Find out what's happening.
{
echo "-------------------------------------"
echo "REPORT"
echo "Stack Pointer = $SP"
echo "Just popped ""$Data"" off the stack."
echo "-------------------------------------"
echo
}
# =======================================================
# Now, for some fun.
echo
# See if you can pop anything off empty stack.
pop
status_report
echo
push garbage
pop
status_report # Garbage in, garbage out.
value1=23; push $value1
value2=skidoo; push $value2
value3=LAST; push $value3
pop # LAST
status_report
pop # skidoo
status_report
pop # 23
status_report # Last-in, first-out!
# Notice how the stack pointer decrements with each push,
#+ and increments with each pop.
echo
exit 0
# =======================================================
# Exercises:
# ---------
# 1) Modify the "push()" function to permit pushing
# + multiple element on the stack with a single function call.
Chapter 26. Arrays 437](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-443-320.jpg)
![Advanced Bash-Scripting Guide
# 2) Modify the "pop()" function to permit popping
# + multiple element from the stack with a single function call.
# 3) Add error checking to the critical functions.
# That is, return an error code, depending on
# + successful or unsuccessful completion of the operation,
# + and take appropriate action.
# 4) Using this script as a starting point,
# + write a stack-based 4-function calculator.
--
Fancy manipulation of array "subscripts" may require intermediate variables. For projects involving this,
again consider using a more powerful programming language, such as Perl or C.
Example 26-16. Complex array application: Exploring a weird mathematical series
#!/bin/bash
# Douglas Hofstadter's notorious "Q-series":
# Q(1) = Q(2) = 1
# Q(n) = Q(n - Q(n-1)) + Q(n - Q(n-2)), for n>2
# This is a "chaotic" integer series with strange
#+ and unpredictable behavior.
# The first 20 terms of the series are:
# 1 1 2 3 3 4 5 5 6 6 6 8 8 8 10 9 10 11 11 12
# See Hofstadter's book, _Goedel, Escher, Bach: An Eternal Golden Braid_,
#+ p. 137, ff.
LIMIT=100 # Number of terms to calculate.
LINEWIDTH=20 # Number of terms printed per line.
Q[1]=1 # First two terms of series are 1.
Q[2]=1
echo
echo "Q-series [$LIMIT terms]:"
echo -n "${Q[1]} " # Output first two terms.
echo -n "${Q[2]} "
for ((n=3; n <= $LIMIT; n++)) # C-like loop expression.
do # Q[n] = Q[n - Q[n-1]] + Q[n - Q[n-2]] for n>2
# Need to break the expression into intermediate terms,
#+ since Bash doesn't handle complex array arithmetic very well.
let "n1 = $n - 1" # n-1
let "n2 = $n - 2" # n-2
t0=`expr $n - ${Q[n1]}` # n - Q[n-1]
t1=`expr $n - ${Q[n2]}` # n - Q[n-2]
T0=${Q[t0]} # Q[n - Q[n-1]]
T1=${Q[t1]} # Q[n - Q[n-2]]
Q[n]=`expr $T0 + $T1` # Q[n - Q[n-1]] + Q[n - Q[n-2]]
Chapter 26. Arrays 438](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-444-320.jpg)
![Advanced Bash-Scripting Guide
echo -n "${Q[n]} "
if [ `expr $n % $LINEWIDTH` -eq 0 ] # Format output.
then # ^ modulo
echo # Break lines into neat chunks.
fi
done
echo
exit 0
# This is an iterative implementation of the Q-series.
# The more intuitive recursive implementation is left as an exercise.
# Warning: calculating this series recursively takes a VERY long time
#+ via a script. C/C++ would be orders of magnitude faster.
--
Bash supports only one-dimensional arrays, though a little trickery permits simulating multi-dimensional
ones.
Example 26-17. Simulating a two-dimensional array, then tilting it
#!/bin/bash
# twodim.sh: Simulating a two-dimensional array.
# A one-dimensional array consists of a single row.
# A two-dimensional array stores rows sequentially.
Rows=5
Columns=5
# 5 X 5 Array.
declare -a alpha # char alpha [Rows] [Columns];
# Unnecessary declaration. Why?
load_alpha ()
{
local rc=0
local index
for i in A B C D E F G H I J K L M N O P Q R S T U V W X Y
do # Use different symbols if you like.
local row=`expr $rc / $Columns`
local column=`expr $rc % $Rows`
let "index = $row * $Rows + $column"
alpha[$index]=$i
# alpha[$row][$column]
let "rc += 1"
done
# Simpler would be
#+ declare -a alpha=( A B C D E F G H I J K L M N O P Q R S T U V W X Y )
#+ but this somehow lacks the "flavor" of a two-dimensional array.
}
print_alpha ()
Chapter 26. Arrays 439](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-445-320.jpg)
![Advanced Bash-Scripting Guide
{
local row=0
local index
echo
while [ "$row" -lt "$Rows" ] # Print out in "row major" order:
do #+ columns vary,
#+ while row (outer loop) remains the same.
local column=0
echo -n " " # Lines up "square" array with rotated one.
while [ "$column" -lt "$Columns" ]
do
let "index = $row * $Rows + $column"
echo -n "${alpha[index]} " # alpha[$row][$column]
let "column += 1"
done
let "row += 1"
echo
done
# The simpler equivalent is
# echo ${alpha[*]} | xargs -n $Columns
echo
}
filter () # Filter out negative array indices.
{
echo -n " " # Provides the tilt.
# Explain how.
if [[ "$1" -ge 0 && "$1" -lt "$Rows" && "$2" -ge 0 && "$2" -lt "$Columns" ]]
then
let "index = $1 * $Rows + $2"
# Now, print it rotated.
echo -n " ${alpha[index]}"
# alpha[$row][$column]
fi
}
rotate () # Rotate the array 45 degrees --
{ #+ "balance" it on its lower lefthand corner.
local row
local column
for (( row = Rows; row > -Rows; row-- ))
do # Step through the array backwards. Why?
for (( column = 0; column < Columns; column++ ))
do
if [ "$row" -ge 0 ]
Chapter 26. Arrays 440](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-446-320.jpg)
![Chapter 27. /dev and /proc
A Linux or UNIX filesystem typically has the /dev and /proc special-purpose directories.
27.1. /dev
The /dev directory contains entries for the physical devices that may or may not be present in the hardware.
[106] Appropriately enough, these are called device files. As an example, the hard drive partitions containing
the mounted filesystem(s) have entries in /dev, as df shows.
bash$ df
Filesystem 1k-blocks Used Available Use%
Mounted on
/dev/hda6 495876 222748 247527 48% /
/dev/hda1 50755 3887 44248 9% /boot
/dev/hda8 367013 13262 334803 4% /home
/dev/hda5 1714416 1123624 503704 70% /usr
Among other things, the /dev directory contains loopback devices, such as /dev/loop0. A loopback
device is a gimmick that allows an ordinary file to be accessed as if it were a block device. [107] This permits
mounting an entire filesystem within a single large file. See Example 16-8 and Example 16-7.
A few of the pseudo-devices in /dev have other specialized uses, such as /dev/null, /dev/zero,
/dev/urandom, /dev/sda1 (hard drive partition), /dev/udp (User Datagram Packet port), and
/dev/tcp.
For instance:
To manually mount a USB flash drive, append the following line to /etc/fstab. [108]
/dev/sda1 /mnt/flashdrive auto noauto,user,noatime 0 0
(See also Example A-23.)
Checking whether a disk is in the CD-burner (soft-linked to /dev/hdc):
head -1 /dev/hdc
# head: cannot open '/dev/hdc' for reading: No medium found
# (No disc in the drive.)
# head: error reading '/dev/hdc': Input/output error
# (There is a disk in the drive, but it can't be read;
#+ possibly it's an unrecorded CDR blank.)
# Stream of characters and assorted gibberish
# (There is a pre-recorded disk in the drive,
#+ and this is raw output -- a stream of ASCII and binary data.)
# Here we see the wisdom of using 'head' to limit the output
#+ to manageable proportions, rather than 'cat' or something similar.
# Now, it's just a matter of checking/parsing the output and taking
Chapter 27. /dev and /proc 443](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-449-320.jpg)
![Advanced Bash-Scripting Guide
#+ appropriate action.
When executing a command on a /dev/tcp/$host/$port pseudo-device file, Bash opens a TCP
connection to the associated socket.
A socket is a communications node associated with a specific I/O port. (This is analogous to a hardware
socket, or receptacle, for a connecting cable.) It permits data transfer between hardware devices on the same
machine, between machines on the same network, between machines across different networks, and, of
course, between machines at different locations on the Internet.
The following examples assume an active Internet connection.
Getting the time from nist.gov:
bash$ cat </dev/tcp/time.nist.gov/13
53082 04-03-18 04:26:54 68 0 0 502.3 UTC(NIST) *
[Mark contributed the above example.]
Downloading a URL:
bash$ exec 5<>/dev/tcp/www.net.cn/80
bash$ echo -e "GET / HTTP/1.0n" >&5
bash$ cat <&5
[Thanks, Mark and Mihai Maties.]
Example 27-1. Using /dev/tcp for troubleshooting
#!/bin/bash
# dev-tcp.sh: /dev/tcp redirection to check Internet connection.
# Script by Troy Engel.
# Used with permission.
TCP_HOST=www.dns-diy.com # A known spam-friendly ISP.
TCP_PORT=80 # Port 80 is http.
# Try to connect. (Somewhat similar to a 'ping' . . .)
echo "HEAD / HTTP/1.0" >/dev/tcp/${TCP_HOST}/${TCP_PORT}
MYEXIT=$?
: <<EXPLANATION
If bash was compiled with --enable-net-redirections, it has the capability of
using a special character device for both TCP and UDP redirections. These
redirections are used identically as STDIN/STDOUT/STDERR. The device entries
are 30,36 for /dev/tcp:
mknod /dev/tcp c 30 36
>From the bash reference:
/dev/tcp/host/port
If host is a valid hostname or Internet address, and port is an integer
port number or service name, Bash attempts to open a TCP connection to the
corresponding socket.
Chapter 27. /dev and /proc 444](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-450-320.jpg)
![Advanced Bash-Scripting Guide
EXPLANATION
if [ "X$MYEXIT" = "X0" ]; then
echo "Connection successful. Exit code: $MYEXIT"
else
echo "Connection unsuccessful. Exit code: $MYEXIT"
fi
exit $MYEXIT
Example 27-2. Playing music
#!/bin/bash
# music.sh
# MUSIC WITHOUT EXTERNAL FILES
# Author: Antonio Macchi
# Used in ABS Guide with permission
# /dev/dsp default = 8000 frames per second, 8 bits per frame (1 byte),
#+ 1 channel (mono)
duration=2000 # If 8000 bytes = 1 second, then 2000 = 1/4 second.
volume=$'xc0' # Max volume = xff (or x00).
mute=$'x80' # No volume = x80 (the middle).
function mknote () # $1=Note Hz in bytes (e.g. A = 440Hz ::
{ #+ 8000 fps / 440 = 16 :: A = 16 bytes per second)
for t in `seq 0 $duration`
do
test $(( $t % $1 )) = 0 && echo -n $volume || echo -n $mute
done
}
e=`mknote 49`
g=`mknote 41`
a=`mknote 36`
b=`mknote 32`
c=`mknote 30`
cis=`mknote 29`
d=`mknote 27`
e2=`mknote 24`
n=`mknote 32767`
# European notation.
echo -n "$g$e2$d$c$d$c$a$g$n$g$e$n$g$e2$d$c$c$b$c$cis$n$cis$d
$n$g$e2$d$c$d$c$a$g$n$g$e$n$g$a$d$c$b$a$b$c" > /dev/dsp
# dsp = Digital Signal Processor
exit # A "bonny" example of a shell script!
27.2. /proc
The /proc directory is actually a pseudo-filesystem. The files in /proc mirror currently running system and
kernel processes and contain information and statistics about them.
Chapter 27. /dev and /proc 445](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-451-320.jpg)
![Advanced Bash-Scripting Guide
last full capacity: 36640 mWh
battery technology: rechargeable
design voltage: 10800 mV
design capacity warning: 1832 mWh
design capacity low: 200 mWh
capacity granularity 1: 1 mWh
capacity granularity 2: 1 mWh
model number: IBM-02K6897
serial number: 1133
battery type: LION
OEM info: Panasonic
bash$ fgrep Mem /proc/meminfo
MemTotal: 515216 kB
MemFree: 266248 kB
Shell scripts may extract data from certain of the files in /proc. [109]
FS=iso # ISO filesystem support in kernel?
grep $FS /proc/filesystems # iso9660
kernel_version=$( awk '{ print $3 }' /proc/version )
CPU=$( awk '/model name/ {print $5}' < /proc/cpuinfo )
if [ "$CPU" = "Pentium(R)" ]
then
run_some_commands
...
else
run_other_commands
...
fi
cpu_speed=$( fgrep "cpu MHz" /proc/cpuinfo | awk '{print $4}' )
# Current operating speed (in MHz) of the cpu on your machine.
# On a laptop this may vary, depending on use of battery
#+ or AC power.
#!/bin/bash
# get-commandline.sh
# Get the command-line parameters of a process.
OPTION=cmdline
# Identify PID.
pid=$( echo $(pidof "$1") | awk '{ print $1 }' )
# Get only first ^^^^^^^^^^^^^^^^^^ of multiple instances.
echo
echo "Process ID of (first instance of) "$1" = $pid"
echo -n "Command-line arguments: "
cat /proc/"$pid"/"$OPTION" | xargs -0 echo
# Formats output: ^^^^^^^^^^^^^^^
# (Thanks, Han Holl, for the fixup!)
Chapter 27. /dev and /proc 447](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-453-320.jpg)
![Advanced Bash-Scripting Guide
echo; echo
# For example:
# sh get-commandline.sh xterm
+
devfile="/proc/bus/usb/devices"
text="Spd"
USB1="Spd=12"
USB2="Spd=480"
bus_speed=$(fgrep -m 1 "$text" $devfile | awk '{print $9}')
# ^^^^ Stop after first match.
if [ "$bus_speed" = "$USB1" ]
then
echo "USB 1.1 port found."
# Do something appropriate for USB 1.1.
fi
It is even possible to control certain peripherals with commands sent to the /proc directory.
root# echo on > /proc/acpi/ibm/light
This turns on the Thinklight in certain models of IBM/Lenovo Thinkpads. (May not work on all Linux
distros.)
Of course, caution is advised when writing to /proc.
The /proc directory contains subdirectories with unusual numerical names. Every one of these names maps
to the process ID of a currently running process. Within each of these subdirectories, there are a number of
files that hold useful information about the corresponding process. The stat and status files keep running
statistics on the process, the cmdline file holds the command-line arguments the process was invoked with,
and the exe file is a symbolic link to the complete path name of the invoking process. There are a few more
such files, but these seem to be the most interesting from a scripting standpoint.
Example 27-3. Finding the process associated with a PID
#!/bin/bash
# pid-identifier.sh:
# Gives complete path name to process associated with pid.
ARGNO=1 # Number of arguments the script expects.
E_WRONGARGS=65
E_BADPID=66
E_NOSUCHPROCESS=67
E_NOPERMISSION=68
PROCFILE=exe
if [ $# -ne $ARGNO ]
then
echo "Usage: `basename $0` PID-number" >&2 # Error message >stderr.
Chapter 27. /dev and /proc 448](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-454-320.jpg)
![Advanced Bash-Scripting Guide
exit $E_WRONGARGS
fi
pidno=$( ps ax | grep $1 | awk '{ print $1 }' | grep $1 )
# Checks for pid in "ps" listing, field #1.
# Then makes sure it is the actual process, not the process invoked by this script.
# The last "grep $1" filters out this possibility.
#
# pidno=$( ps ax | awk '{ print $1 }' | grep $1 )
# also works, as Teemu Huovila, points out.
if [ -z "$pidno" ] # If, after all the filtering, the result is a zero-length string,
then #+ no running process corresponds to the pid given.
echo "No such process running."
exit $E_NOSUCHPROCESS
fi
# Alternatively:
# if ! ps $1 > /dev/null 2>&1
# then # no running process corresponds to the pid given.
# echo "No such process running."
# exit $E_NOSUCHPROCESS
# fi
# To simplify the entire process, use "pidof".
if [ ! -r "/proc/$1/$PROCFILE" ] # Check for read permission.
then
echo "Process $1 running, but..."
echo "Can't get read permission on /proc/$1/$PROCFILE."
exit $E_NOPERMISSION # Ordinary user can't access some files in /proc.
fi
# The last two tests may be replaced by:
# if ! kill -0 $1 > /dev/null 2>&1 # '0' is not a signal, but
# this will test whether it is possible
# to send a signal to the process.
# then echo "PID doesn't exist or you're not its owner" >&2
# exit $E_BADPID
# fi
exe_file=$( ls -l /proc/$1 | grep "exe" | awk '{ print $11 }' )
# Or exe_file=$( ls -l /proc/$1/exe | awk '{print $11}' )
#
# /proc/pid-number/exe is a symbolic link
#+ to the complete path name of the invoking process.
if [ -e "$exe_file" ] # If /proc/pid-number/exe exists,
then #+ then the corresponding process exists.
echo "Process #$1 invoked by $exe_file."
else
echo "No such process running."
fi
# This elaborate script can *almost* be replaced by
# ps ax | grep $1 | awk '{ print $5 }'
# However, this will not work...
#+ because the fifth field of 'ps' is argv[0] of the process,
Chapter 27. /dev and /proc 449](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-455-320.jpg)
![Advanced Bash-Scripting Guide
#+ not the executable file path.
#
# However, either of the following would work.
# find /proc/$1/exe -printf '%ln'
# lsof -aFn -p $1 -d txt | sed -ne 's/^n//p'
# Additional commentary by Stephane Chazelas.
exit 0
Example 27-4. On-line connect status
#!/bin/bash
PROCNAME=pppd # ppp daemon
PROCFILENAME=status # Where to look.
NOTCONNECTED=65
INTERVAL=2 # Update every 2 seconds.
pidno=$( ps ax | grep -v "ps ax" | grep -v grep | grep $PROCNAME |
awk '{ print $1 }' )
# Finding the process number of 'pppd', the 'ppp daemon'.
# Have to filter out the process lines generated by the search itself.
#
# However, as Oleg Philon points out,
#+ this could have been considerably simplified by using "pidof".
# pidno=$( pidof $PROCNAME )
#
# Moral of the story:
#+ When a command sequence gets too complex, look for a shortcut.
if [ -z "$pidno" ] # If no pid, then process is not running.
then
echo "Not connected."
exit $NOTCONNECTED
else
echo "Connected."; echo
fi
while [ true ] # Endless loop, script can be improved here.
do
if [ ! -e "/proc/$pidno/$PROCFILENAME" ]
# While process running, then "status" file exists.
then
echo "Disconnected."
exit $NOTCONNECTED
fi
netstat -s | grep "packets received" # Get some connect statistics.
netstat -s | grep "packets delivered"
sleep $INTERVAL
echo; echo
done
exit 0
Chapter 27. /dev and /proc 450](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-456-320.jpg)
![Chapter 28. Of Zeros and Nulls
Faultily faultless, icily regular, splendidly null
Dead perfection; no more.
--Alfred Lord Tennyson
/dev/zero ... /dev/null
Uses of /dev/null
Think of /dev/null as a black hole. It is essentially the equivalent of a write-only file. Everything
written to it disappears. Attempts to read or output from it result in nothing. All the same,
/dev/null can be quite useful from both the command-line and in scripts.
Suppressing stdout.
cat $filename >/dev/null
# Contents of the file will not list to stdout.
Suppressing stderr (from Example 15-3).
rm $badname 2>/dev/null
# So error messages [stderr] deep-sixed.
Suppressing output from both stdout and stderr.
cat $filename 2>/dev/null >/dev/null
# If "$filename" does not exist, there will be no error message output.
# If "$filename" does exist, the contents of the file will not list to stdout.
# Therefore, no output at all will result from the above line of code.
#
# This can be useful in situations where the return code from a command
#+ needs to be tested, but no output is desired.
#
# cat $filename &>/dev/null
# also works, as Baris Cicek points out.
Deleting contents of a file, but preserving the file itself, with all attendant permissions (from Example
2-1 and Example 2-3):
cat /dev/null > /var/log/messages
# : > /var/log/messages has same effect, but does not spawn a new process.
cat /dev/null > /var/log/wtmp
Automatically emptying the contents of a logfile (especially good for dealing with those nasty
"cookies" sent by commercial Web sites):
Example 28-1. Hiding the cookie jar
# Obsolete Netscape browser.
# Same principle applies to newer browsers.
if [ -f ~/.netscape/cookies ] # Remove, if exists.
then
Chapter 28. Of Zeros and Nulls 452](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-458-320.jpg)
![Advanced Bash-Scripting Guide
rm -f ~/.netscape/cookies
fi
ln -s /dev/null ~/.netscape/cookies
# All cookies now get sent to a black hole, rather than saved to disk.
Uses of /dev/zero
Like /dev/null, /dev/zero is a pseudo-device file, but it actually produces a stream of nulls
(binary zeros, not the ASCII kind). Output written to /dev/zero disappears, and it is fairly difficult
to actually read the nulls emitted there, though it can be done with od or a hex editor. The chief use of
/dev/zero is creating an initialized dummy file of predetermined length intended as a temporary
swap file.
Example 28-2. Setting up a swapfile using /dev/zero
#!/bin/bash
# Creating a swap file.
# A swap file provides a temporary storage cache
#+ which helps speed up certain filesystem operations.
ROOT_UID=0 # Root has $UID 0.
E_WRONG_USER=85 # Not root?
FILE=/swap
BLOCKSIZE=1024
MINBLOCKS=40
SUCCESS=0
# This script must be run as root.
if [ "$UID" -ne "$ROOT_UID" ]
then
echo; echo "You must be root to run this script."; echo
exit $E_WRONG_USER
fi
blocks=${1:-$MINBLOCKS} # Set to default of 40 blocks,
#+ if nothing specified on command-line.
# This is the equivalent of the command block below.
# --------------------------------------------------
# if [ -n "$1" ]
# then
# blocks=$1
# else
# blocks=$MINBLOCKS
# fi
# --------------------------------------------------
if [ "$blocks" -lt $MINBLOCKS ]
then
blocks=$MINBLOCKS # Must be at least 40 blocks long.
fi
######################################################################
echo "Creating swap file of size $blocks blocks (KB)."
dd if=/dev/zero of=$FILE bs=$BLOCKSIZE count=$blocks # Zero out file.
Chapter 28. Of Zeros and Nulls 453](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-459-320.jpg)
![Advanced Bash-Scripting Guide
mkswap $FILE $blocks # Designate it a swap file.
swapon $FILE # Activate swap file.
retcode=$? # Everything worked?
# Note that if one or more of these commands fails,
#+ then it could cause nasty problems.
######################################################################
# Exercise:
# Rewrite the above block of code so that if it does not execute
#+ successfully, then:
# 1) an error message is echoed to stderr,
# 2) all temporary files are cleaned up, and
# 3) the script exits in an orderly fashion with an
#+ appropriate error code.
echo "Swap file created and activated."
exit $retcode
Another application of /dev/zero is to "zero out" a file of a designated size for a special purpose,
such as mounting a filesystem on a loopback device (see Example 16-8) or "securely" deleting a file
(see Example 15-60).
Example 28-3. Creating a ramdisk
#!/bin/bash
# ramdisk.sh
# A "ramdisk" is a segment of system RAM memory
#+ which acts as if it were a filesystem.
# Its advantage is very fast access (read/write time).
# Disadvantages: volatility, loss of data on reboot or powerdown.
#+ less RAM available to system.
#
# Of what use is a ramdisk?
# Keeping a large dataset, such as a table or dictionary on ramdisk,
#+ speeds up data lookup, since memory access is much faster than disk access.
E_NON_ROOT_USER=70 # Must run as root.
ROOTUSER_NAME=root
MOUNTPT=/mnt/ramdisk
SIZE=2000 # 2K blocks (change as appropriate)
BLOCKSIZE=1024 # 1K (1024 byte) block size
DEVICE=/dev/ram0 # First ram device
username=`id -nu`
if [ "$username" != "$ROOTUSER_NAME" ]
then
echo "Must be root to run "`basename $0`"."
exit $E_NON_ROOT_USER
fi
if [ ! -d "$MOUNTPT" ] # Test whether mount point already there,
then #+ so no error if this script is run
mkdir $MOUNTPT #+ multiple times.
fi
##############################################################################
Chapter 28. Of Zeros and Nulls 454](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-460-320.jpg)
![Chapter 29. Debugging
Debugging is twice as hard as writing the code in
the first place. Therefore, if you write the code as
cleverly as possible, you are, by definition, not
smart enough to debug it.
--Brian Kernighan
The Bash shell contains no built-in debugger, and only bare-bones debugging-specific commands and
constructs. Syntax errors or outright typos in the script generate cryptic error messages that are often of no
help in debugging a non-functional script.
Example 29-1. A buggy script
#!/bin/bash
# ex74.sh
# This is a buggy script.
# Where, oh where is the error?
a=37
if [$a -gt 27 ]
then
echo $a
fi
exit 0
Output from script:
./ex74.sh: [37: command not found
What's wrong with the above script? Hint: after the if.
Example 29-2. Missing keyword
#!/bin/bash
# missing-keyword.sh: What error message will this generate?
for a in 1 2 3
do
echo "$a"
# done # Required keyword 'done' commented out in line 7.
exit 0
Output from script:
missing-keyword.sh: line 10: syntax error: unexpected end of file
Note that the error message does not necessarily reference the line in which the error occurs, but the line
where the Bash interpreter finally becomes aware of the error.
Error messages may disregard comment lines in a script when reporting the line number of a syntax error.
Chapter 29. Debugging 456](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-462-320.jpg)
![Advanced Bash-Scripting Guide
What if the script executes, but does not work as expected? This is the all too familiar logic error.
Example 29-3. test24: another buggy script
#!/bin/bash
# This script is supposed to delete all filenames in current directory
#+ containing embedded spaces.
# It doesn't work.
# Why not?
badname=`ls | grep ' '`
# Try this:
# echo "$badname"
rm "$badname"
exit 0
Try to find out what's wrong with Example 29-3 by uncommenting the echo "$badname" line. Echo
statements are useful for seeing whether what you expect is actually what you get.
In this particular case, rm "$badname" will not give the desired results because $badname should not be
quoted. Placing it in quotes ensures that rm has only one argument (it will match only one filename). A partial
fix is to remove to quotes from $badname and to reset $IFS to contain only a newline, IFS=$'n'.
However, there are simpler ways of going about it.
# Correct methods of deleting filenames containing spaces.
rm * *
rm *" "*
rm *' '*
# Thank you. S.C.
Summarizing the symptoms of a buggy script,
1. It bombs with a "syntax error" message, or
2. It runs, but does not work as expected (logic error).
3. It runs, works as expected, but has nasty side effects (logic bomb).
Tools for debugging non-working scripts include
1. Inserting echo statements at critical points in the script to trace the variables, and otherwise give a
snapshot of what is going on.
Even better is an echo that echoes only when debug is on.
### debecho (debug-echo), by Stefano Falsetto ###
### Will echo passed parameters only if DEBUG is set to a value. ###
debecho () {
if [ ! -z "$DEBUG" ]; then
echo "$1" >&2
# ^^^ to stderr
fi
Chapter 29. Debugging 457](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-463-320.jpg)
![Advanced Bash-Scripting Guide
}
DEBUG=on
Whatever=whatnot
debecho $Whatever # whatnot
DEBUG=
Whatever=notwhat
debecho $Whatever # (Will not echo.)
2. Using the tee filter to check processes or data flows at critical points.
3. Setting option flags -n -v -x
sh -n scriptname checks for syntax errors without actually running the script. This is the
equivalent of inserting set -n or set -o noexec into the script. Note that certain types of
syntax errors can slip past this check.
sh -v scriptname echoes each command before executing it. This is the equivalent of inserting
set -v or set -o verbose in the script.
The -n and -v flags work well together. sh -nv scriptname gives a verbose syntax check.
sh -x scriptname echoes the result each command, but in an abbreviated manner. This is the
equivalent of inserting set -x or set -o xtrace in the script.
Inserting set -u or set -o nounset in the script runs it, but gives an unbound variable error
message at each attempt to use an undeclared variable.
4. Using an "assert" function to test a variable or condition at critical points in a script. (This is an idea
borrowed from C.)
Example 29-4. Testing a condition with an assert
#!/bin/bash
# assert.sh
#######################################################################
assert () # If condition false,
{ #+ exit from script
#+ with appropriate error message.
E_PARAM_ERR=98
E_ASSERT_FAILED=99
if [ -z "$2" ] # Not enough parameters passed
then #+ to assert() function.
return $E_PARAM_ERR # No damage done.
fi
lineno=$2
if [ ! $1 ]
then
echo "Assertion failed: "$1""
echo "File "$0", line $lineno" # Give name of file and line number.
exit $E_ASSERT_FAILED
# else
Chapter 29. Debugging 458](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-464-320.jpg)
![Advanced Bash-Scripting Guide
# return
# and continue executing the script.
fi
} # Insert a similar assert() function into a script you need to debug.
#######################################################################
a=5
b=4
condition="$a -lt $b" # Error message and exit from script.
# Try setting "condition" to something else
#+ and see what happens.
assert "$condition" $LINENO
# The remainder of the script executes only if the "assert" does not fail.
# Some commands.
# Some more commands . . .
echo "This statement echoes only if the "assert" does not fail."
# . . .
# More commands . . .
exit $?
5. Using the $LINENO variable and the caller builtin.
6. Trapping at exit.
The exit command in a script triggers a signal 0, terminating the process, that is, the script itself. [110]
It is often useful to trap the exit, forcing a "printout" of variables, for example. The trap must be the
first command in the script.
Trapping signals
trap
Specifies an action on receipt of a signal; also useful for debugging.
A signal is a message sent to a process, either by the kernel or another process, telling it to take
some specified action (usually to terminate). For example, hitting a Control-C sends a user interrupt,
an INT signal, to a running program.
A simple instance:
trap '' 2
# Ignore interrupt 2 (Control-C), with no action specified.
trap 'echo "Control-C disabled."' 2
# Message when Control-C pressed.
Example 29-5. Trapping at exit
#!/bin/bash
# Hunting variables with a trap.
trap 'echo Variable Listing --- a = $a b = $b' EXIT
Chapter 29. Debugging 459](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-465-320.jpg)
![Advanced Bash-Scripting Guide
# EXIT is the name of the signal generated upon exit from a script.
#
# The command specified by the "trap" doesn't execute until
#+ the appropriate signal is sent.
echo "This prints before the "trap" --"
echo "even though the script sees the "trap" first."
echo
a=39
b=36
exit 0
# Note that commenting out the 'exit' command makes no difference,
#+ since the script exits in any case after running out of commands.
Example 29-6. Cleaning up after Control-C
#!/bin/bash
# logon.sh: A quick 'n dirty script to check whether you are on-line yet.
umask 177 # Make sure temp files are not world readable.
TRUE=1
LOGFILE=/var/log/messages
# Note that $LOGFILE must be readable
#+ (as root, chmod 644 /var/log/messages).
TEMPFILE=temp.$$
# Create a "unique" temp file name, using process id of the script.
# Using 'mktemp' is an alternative.
# For example:
# TEMPFILE=`mktemp temp.XXXXXX`
KEYWORD=address
# At logon, the line "remote IP address xxx.xxx.xxx.xxx"
# appended to /var/log/messages.
ONLINE=22
USER_INTERRUPT=13
CHECK_LINES=100
# How many lines in log file to check.
trap 'rm -f $TEMPFILE; exit $USER_INTERRUPT' TERM INT
# Cleans up the temp file if script interrupted by control-c.
echo
while [ $TRUE ] #Endless loop.
do
tail -n $CHECK_LINES $LOGFILE> $TEMPFILE
# Saves last 100 lines of system log file as temp file.
# Necessary, since newer kernels generate many log messages at log on.
search=`grep $KEYWORD $TEMPFILE`
# Checks for presence of the "IP address" phrase,
#+ indicating a successful logon.
if [ ! -z "$search" ] # Quotes necessary because of possible spaces.
then
echo "On-line"
rm -f $TEMPFILE # Clean up temp file.
exit $ONLINE
Chapter 29. Debugging 460](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-466-320.jpg)
![Advanced Bash-Scripting Guide
let "variable *= 3"
echo " Just multiplied $variable by 3."
exit
# The "trap 'command1 . . . command2 . . .' DEBUG" construct is
#+ more appropriate in the context of a complex script,
#+ where inserting multiple "echo $variable" statements might be
#+ awkward and time-consuming.
# Thanks, Stephane Chazelas for the pointer.
Output of script:
VARIABLE-TRACE> $variable = ""
VARIABLE-TRACE> $variable = "29"
Just initialized $variable to 29.
VARIABLE-TRACE> $variable = "29"
VARIABLE-TRACE> $variable = "87"
Just multiplied $variable by 3.
VARIABLE-TRACE> $variable = "87"
Of course, the trap command has other uses aside from debugging, such as disabling certain keystrokes
within a script (see Example A-43).
Example 29-8. Running multiple processes (on an SMP box)
#!/bin/bash
# parent.sh
# Running multiple processes on an SMP box.
# Author: Tedman Eng
# This is the first of two scripts,
#+ both of which must be present in the current working directory.
LIMIT=$1 # Total number of process to start
NUMPROC=4 # Number of concurrent threads (forks?)
PROCID=1 # Starting Process ID
echo "My PID is $$"
function start_thread() {
if [ $PROCID -le $LIMIT ] ; then
./child.sh $PROCID&
let "PROCID++"
else
echo "Limit reached."
wait
exit
fi
}
while [ "$NUMPROC" -gt 0 ]; do
start_thread;
let "NUMPROC--"
done
Chapter 29. Debugging 462](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-468-320.jpg)
![Advanced Bash-Scripting Guide
# Must call script with at least one integer parameter
#+ (number of concurrent processes).
# All other parameters are passed through to the processes started.
INDICE=8 # Total number of process to start
TEMPO=5 # Maximum sleep time per process
E_BADARGS=65 # No arg(s) passed to script.
if [ $# -eq 0 ] # Check for at least one argument passed to script.
then
echo "Usage: `basename $0` number_of_processes [passed params]"
exit $E_BADARGS
fi
NUMPROC=$1 # Number of concurrent process
shift
PARAMETRI=( "$@" ) # Parameters of each process
function avvia() {
local temp
local index
temp=$RANDOM
index=$1
shift
let "temp %= $TEMPO"
let "temp += 1"
echo "Starting $index Time:$temp" "$@"
sleep ${temp}
echo "Ending $index"
kill -s SIGRTMIN $$
}
function parti() {
if [ $INDICE -gt 0 ] ; then
avvia $INDICE "${PARAMETRI[@]}" &
let "INDICE--"
else
trap : SIGRTMIN
fi
}
trap parti SIGRTMIN
while [ "$NUMPROC" -gt 0 ]; do
parti;
let "NUMPROC--"
done
wait
trap - SIGRTMIN
exit $?
: <<SCRIPT_AUTHOR_COMMENTS
I had the need to run a program, with specified options, on a number of
different files, using a SMP machine. So I thought [I'd] keep running
a specified number of processes and start a new one each time . . . one
of these terminates.
The "wait" instruction does not help, since it waits for a given process
Chapter 29. Debugging 464](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-470-320.jpg)
![Advanced Bash-Scripting Guide
or *all* process started in background. So I wrote [this] bash script
that can do the job, using the "trap" instruction.
--Vernia Damiano
SCRIPT_AUTHOR_COMMENTS
trap '' SIGNAL (two adjacent apostrophes) disables SIGNAL for the remainder of the script. trap
SIGNAL restores the functioning of SIGNAL once more. This is useful to protect a critical portion of a
script from an undesirable interrupt.
trap '' 2 # Signal 2 is Control-C, now disabled.
command
command
command
trap 2 # Reenables Control-C
Version 3 of Bash adds the following internal variables for use by the debugger.
1. $BASH_ARGC
Number of command-line arguments passed to script, similar to $#.
2. $BASH_ARGV
Final command-line parameter passed to script, equivalent ${!#}.
3. $BASH_COMMAND
Command currently executing.
4. $BASH_EXECUTION_STRING
The option string following the -c option to Bash.
5. $BASH_LINENO
In a function, indicates the line number of the function call.
6. $BASH_REMATCH
Array variable associated with =~ conditional regex matching.
7. $BASH_SOURCE
Same as $0.
8. $BASH_SUBSHELL
Chapter 29. Debugging 465](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-471-320.jpg)
![Advanced Bash-Scripting Guide
let c = $a - $b # Instead: let c=$a-$b or let "c = $a - $b"
if [ $a -le 5] # if [ $a -le 5 ] is correct.
# ^^ if [ "$a" -le 5 ] is even better.
# [[ $a -le 5 ]] also works.
•
Not terminating with a semicolon the final command in a code block within curly brackets.
{ ls -l; df; echo "Done." }
# bash: syntax error: unexpected end of file
{ ls -l; df; echo "Done."; }
# ^ ### Final command needs semicolon.
•
Assuming uninitialized variables (variables before a value is assigned to them) are "zeroed out". An
uninitialized variable has a value of null, not zero.
#!/bin/bash
echo "uninitialized_var = $uninitialized_var"
# uninitialized_var =
•
Mixing up = and -eq in a test. Remember, = is for comparing literal variables and -eq for integers.
if [ "$a" = 273 ] # Is $a an integer or string?
if [ "$a" -eq 273 ] # If $a is an integer.
# Sometimes you can interchange -eq and = without adverse consequences.
# However . . .
a=273.0 # Not an integer.
if [ "$a" = 273 ]
then
echo "Comparison works."
else
echo "Comparison does not work."
fi # Comparison does not work.
# Same with a=" 273" and a="0273".
# Likewise, problems trying to use "-eq" with non-integer values.
if [ "$a" -eq 273.0 ]
then
echo "a = $a"
fi # Aborts with an error message.
# test.sh: [: 273.0: integer expression expected
•
Misusing string comparison operators.
Example 31-1. Numerical and string comparison are not equivalent
#!/bin/bash
Chapter 31. Gotchas 470](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-476-320.jpg)
![Advanced Bash-Scripting Guide
# bad-op.sh: Trying to use a string comparison on integers.
echo
number=1
# The following while-loop has two errors:
#+ one blatant, and the other subtle.
while [ "$number" < 5 ] # Wrong! Should be: while [ "$number" -lt 5 ]
do
echo -n "$number "
let "number += 1"
done
# Attempt to run this bombs with the error message:
#+ bad-op.sh: line 10: 5: No such file or directory
# Within single brackets, "<" must be escaped,
#+ and even then, it's still wrong for comparing integers.
echo "---------------------"
while [ "$number" < 5 ] # 1 2 3 4
do #
echo -n "$number " # It *seems* to work, but . . .
let "number += 1" #+ it actually does an ASCII comparison,
done #+ rather than a numerical one.
echo; echo "---------------------"
# This can cause problems. For example:
lesser=5
greater=105
if [ "$greater" < "$lesser" ]
then
echo "$greater is less than $lesser"
fi # 105 is less than 5
# In fact, "105" actually is less than "5"
#+ in a string comparison (ASCII sort order).
echo
exit 0
•
Attempting to use let to set string variables.
let "a = hello, you"
echo "$a" # 0
•
Sometimes variables within "test" brackets ([ ]) need to be quoted (double quotes). Failure to do so
may cause unexpected behavior. See Example 7-6, Example 19-5, and Example 9-6.
•
Quoting a variable containing whitespace prevents splitting. Sometimes this produces unintended
consequences.
•
Commands issued from a script may fail to execute because the script owner lacks execute permission
for them. If a user cannot invoke a command from the command-line, then putting it into a script will
likewise fail. Try changing the attributes of the command in question, perhaps even setting the suid bit
Chapter 31. Gotchas 471](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-477-320.jpg)
![Advanced Bash-Scripting Guide
(as root, of course).
•
Attempting to use - as a redirection operator (which it is not) will usually result in an unpleasant
surprise.
command1 2> - | command2
# Trying to redirect error output of command1 into a pipe . . .
# . . . will not work.
command1 2>& - | command2 # Also futile.
Thanks, S.C.
•
Using Bash version 2+ functionality may cause a bailout with error messages. Older Linux machines
may have version 1.XX of Bash as the default installation.
#!/bin/bash
minimum_version=2
# Since Chet Ramey is constantly adding features to Bash,
# you may set $minimum_version to 2.XX, 3.XX, or whatever is appropriate.
E_BAD_VERSION=80
if [ "$BASH_VERSION" < "$minimum_version" ]
then
echo "This script works only with Bash, version $minimum or greater."
echo "Upgrade strongly recommended."
exit $E_BAD_VERSION
fi
...
• Using Bash-specific functionality in a Bourne shell script (#!/bin/sh) on a non-Linux machine
may cause unexpected behavior. A Linux system usually aliases sh to bash, but this does not
necessarily hold true for a generic UNIX machine.
•
Using undocumented features in Bash turns out to be a dangerous practice. In previous releases of this
book there were several scripts that depended on the "feature" that, although the maximum value of
an exit or return value was 255, that limit did not apply to negative integers. Unfortunately, in version
2.05b and later, that loophole disappeared. See Example 23-9.
•
A script with DOS-type newlines (rn) will fail to execute, since #!/bin/bashrn is not
recognized, not the same as the expected #!/bin/bashn. The fix is to convert the script to
UNIX-style newlines.
#!/bin/bash
echo "Here"
unix2dos $0 # Script changes itself to DOS format.
chmod 755 $0 # Change back to execute permission.
# The 'unix2dos' command removes execute permission.
./$0 # Script tries to run itself again.
# But it won't work as a DOS file.
echo "There"
Chapter 31. Gotchas 472](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-478-320.jpg)
![Advanced Bash-Scripting Guide
# Note also that an echo to a 'read' works within a subshell.
# However, the value of the variable changes *only* within the subshell.
a=aaa # Starting all over again.
b=bbb
c=ccc
echo; echo
echo "one two three" | ( read a b c;
echo "Inside subshell: "; echo "a = $a"; echo "b = $b"; echo "c = $c" )
# a = one
# b = two
# c = three
echo "-----------------"
echo "Outside subshell: "
echo "a = $a" # a = aaa
echo "b = $b" # b = bbb
echo "c = $c" # c = ccc
echo
exit 0
In fact, as Anthony Richardson points out, piping to any loop can cause a similar problem.
# Loop piping troubles.
# This example by Anthony Richardson,
#+ with addendum by Wilbert Berendsen.
foundone=false
find $HOME -type f -atime +30 -size 100k |
while true
do
read f
echo "$f is over 100KB and has not been accessed in over 30 days"
echo "Consider moving the file to archives."
foundone=true
# ------------------------------------
echo "Subshell level = $BASH_SUBSHELL"
# Subshell level = 1
# Yes, we're inside a subshell.
# ------------------------------------
done
# foundone will always be false here since it is
#+ set to true inside a subshell
if [ $foundone = false ]
then
echo "No files need archiving."
fi
# =====================Now, here is the correct way:=================
foundone=false
for f in $(find $HOME -type f -atime +30 -size 100k) # No pipe here.
do
echo "$f is over 100KB and has not been accessed in over 30 days"
echo "Consider moving the file to archives."
foundone=true
done
Chapter 31. Gotchas 475](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-481-320.jpg)
![Advanced Bash-Scripting Guide
if [ $foundone = false ]
then
echo "No files need archiving."
fi
# ==================And here is another alternative==================
# Places the part of the script that reads the variables
#+ within a code block, so they share the same subshell.
# Thank you, W.B.
find $HOME -type f -atime +30 -size 100k | {
foundone=false
while read f
do
echo "$f is over 100KB and has not been accessed in over 30 days"
echo "Consider moving the file to archives."
foundone=true
done
if ! $foundone
then
echo "No files need archiving."
fi
}
A lookalike problem occurs when trying to write the stdout of a tail -f piped to grep.
tail -f /var/log/messages | grep "$ERROR_MSG" >> error.log
# The "error.log" file will not have anything written to it.
# As Samuli Kaipiainen points out, this results from grep
#+ buffering its output.
# The fix is to add the "--line-buffered" parameter to grep.
•
Using "suid" commands within scripts is risky, as it may compromise system security. [111]
•
Using shell scripts for CGI programming may be problematic. Shell script variables are not
"typesafe," and this can cause undesirable behavior as far as CGI is concerned. Moreover, it is
difficult to "cracker-proof" shell scripts.
• Bash does not handle the double slash (//) string correctly.
•
Bash scripts written for Linux or BSD systems may need fixups to run on a commercial UNIX (or
Apple OSX) machine. Such scripts often employ the GNU set of commands and filters, which have
greater functionality than their generic UNIX counterparts. This is particularly true of such text
processing utilites as tr.
Danger is near thee --
Beware, beware, beware, beware.
Many brave hearts are asleep in the deep.
So beware --
Beware.
Chapter 31. Gotchas 476](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-482-320.jpg)
![Chapter 32. Scripting With Style
Get into the habit of writing shell scripts in a structured and systematic manner. Even on-the-fly and "written
on the back of an envelope" scripts will benefit if you take a few minutes to plan and organize your thoughts
before sitting down and coding.
Herewith are a few stylistic guidelines. This is not (necessarily) intended as an Official Shell Scripting
Stylesheet.
32.1. Unofficial Shell Scripting Stylesheet
• Comment your code. This makes it easier for others to understand (and appreciate), and easier for you
to maintain.
PASS="$PASS${MATRIX:$(($RANDOM%${#MATRIX})):1}"
# It made perfect sense when you wrote it last year,
#+ but now it's a complete mystery.
# (From Antek Sawicki's "pw.sh" script.)
Add descriptive headers to your scripts and functions.
#!/bin/bash
#************************************************#
# xyz.sh #
# written by Bozo Bozeman #
# July 05, 2001 #
# #
# Clean up project files. #
#************************************************#
E_BADDIR=85 # No such directory.
projectdir=/home/bozo/projects # Directory to clean up.
# --------------------------------------------------------- #
# cleanup_pfiles () #
# Removes all files in designated directory. #
# Parameter: $target_directory #
# Returns: 0 on success, $E_BADDIR if something went wrong. #
# --------------------------------------------------------- #
cleanup_pfiles ()
{
if [ ! -d "$1" ] # Test if target directory exists.
then
echo "$1 is not a directory."
return $E_BADDIR
fi
rm -f "$1"/*
return 0 # Success.
}
cleanup_pfiles $projectdir
exit $?
• Avoid using "magic numbers," [112] that is, "hard-wired" literal constants. Use meaningful variable
names instead. This makes the script easier to understand and permits making changes and updates
without breaking the application.
Chapter 32. Scripting With Style 478](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-484-320.jpg)
![Advanced Bash-Scripting Guide
if [ -f /var/log/messages ]
then
...
fi
# A year later, you decide to change the script to check /var/log/syslog.
# It is now necessary to manually change the script, instance by instance,
#+ and hope nothing breaks.
# A better way:
LOGFILE=/var/log/messages # Only line that needs to be changed.
if [ -f "$LOGFILE" ]
then
...
fi
• Choose descriptive names for variables and functions.
fl=`ls -al $dirname` # Cryptic.
file_listing=`ls -al $dirname` # Better.
MAXVAL=10 # All caps used for a script constant.
while [ "$index" -le "$MAXVAL" ]
...
E_NOTFOUND=95 # Uppercase for an errorcode,
#+ and name prefixed with E_.
if [ ! -e "$filename" ]
then
echo "File $filename not found."
exit $E_NOTFOUND
fi
MAIL_DIRECTORY=/var/spool/mail/bozo # Uppercase for an environmental
export MAIL_DIRECTORY #+ variable.
GetAnswer () # Mixed case works well for a
{ #+ function name, especially
prompt=$1 #+ when it improves legibility.
echo -n $prompt
read answer
return $answer
}
GetAnswer "What is your favorite number? "
favorite_number=$?
echo $favorite_number
_uservariable=23 # Permissible, but not recommended.
# It's better for user-defined variables not to start with an underscore.
# Leave that for system variables.
• Use exit codes in a systematic and meaningful way.
E_WRONG_ARGS=95
...
...
exit $E_WRONG_ARGS
See also Appendix D.
Chapter 32. Scripting With Style 479](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-485-320.jpg)
![Advanced Bash-Scripting Guide
Ender suggests using the exit codes in /usr/include/sysexits.h in shell scripts, though these
are primarily intended for C and C++ programming.
• Use standardized parameter flags for script invocation. Ender proposes the following set of flags.
-a All: Return all information (including hidden file info).
-b Brief: Short version, usually for other scripts.
-c Copy, concatenate, etc.
-d Daily: Use information from the whole day, and not merely
information for a specific instance/user.
-e Extended/Elaborate: (often does not include hidden file info).
-h Help: Verbose usage w/descs, aux info, discussion, help.
See also -V.
-l Log output of script.
-m Manual: Launch man-page for base command.
-n Numbers: Numerical data only.
-r Recursive: All files in a directory (and/or all sub-dirs).
-s Setup & File Maintenance: Config files for this script.
-u Usage: List of invocation flags for the script.
-v Verbose: Human readable output, more or less formatted.
-V Version / License / Copy(right|left) / Contribs (email too).
See also Section F.1.
• Break complex scripts into simpler modules. Use functions where appropriate. See Example 34-4.
• Don't use a complex construct where a simpler one will do.
COMMAND
if [ $? -eq 0 ]
...
# Redundant and non-intuitive.
if COMMAND
...
# More concise (if perhaps not quite as legible).
... reading the UNIX source code to the Bourne
shell (/bin/sh). I was shocked at how much simple
algorithms could be made cryptic, and therefore
useless, by a poor choice of code style. I asked
myself, "Could someone be proud of this code?"
--Landon Noll
Chapter 32. Scripting With Style 480](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-486-320.jpg)
![Chapter 33. Miscellany
Nobody really knows what the Bourne shell's
grammar is. Even examination of the source code
is little help.
--Tom Duff
33.1. Interactive and non-interactive shells and scripts
An interactive shell reads commands from user input on a tty. Among other things, such a shell reads startup
files on activation, displays a prompt, and enables job control by default. The user can interact with the shell.
A shell running a script is always a non-interactive shell. All the same, the script can still access its tty. It is
even possible to emulate an interactive shell in a script.
#!/bin/bash
MY_PROMPT='$ '
while :
do
echo -n "$MY_PROMPT"
read line
eval "$line"
done
exit 0
# This example script, and much of the above explanation supplied by
# Stéphane Chazelas (thanks again).
Let us consider an interactive script to be one that requires input from the user, usually with read statements
(see Example 14-3). "Real life" is actually a bit messier than that. For now, assume an interactive script is
bound to a tty, a script that a user has invoked from the console or an xterm.
Init and startup scripts are necessarily non-interactive, since they must run without human intervention. Many
administrative and system maintenance scripts are likewise non-interactive. Unvarying repetitive tasks cry out
for automation by non-interactive scripts.
Non-interactive scripts can run in the background, but interactive ones hang, waiting for input that never
comes. Handle that difficulty by having an expect script or embedded here document feed input to an
interactive script running as a background job. In the simplest case, redirect a file to supply input to a read
statement (read variable <file). These particular workarounds make possible general purpose scripts that run
in either interactive or non-interactive modes.
If a script needs to test whether it is running in an interactive shell, it is simply a matter of finding whether the
prompt variable, $PS1 is set. (If the user is being prompted for input, then the script needs to display a
prompt.)
if [ -z $PS1 ] # no prompt?
then
# non-interactive
...
else
Chapter 33. Miscellany 481](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-487-320.jpg)
![Advanced Bash-Scripting Guide
# interactive
...
fi
Alternatively, the script can test for the presence of option "i" in the $- flag.
case $- in
*i*) # interactive shell
;;
*) # non-interactive shell
;;
# (Courtesy of "UNIX F.A.Q.," 1993)
However, John Lange describes an alternative method, using the -t test operator.
# Test for a terminal!
fd=0 # stdin
# As we recall, the -t test option checks whether the stdin, [ -t 0 ],
#+ or stdout, [ -t 1 ], in a given script is running in a terminal.
if [ -t "$fd" ]
then
echo interactive
else
echo non-interactive
fi
# But, as John points out:
# if [ -t 0 ] works ... when you're logged in locally
# but fails when you invoke the command remotely via ssh.
# So for a true test you also have to test for a socket.
if [[ -t "$fd" || -S /dev/stdin ]]
then
echo interactive
else
echo non-interactive
fi
Scripts may be forced to run in interactive mode with the -i option or with a #!/bin/bash -i header.
Be aware that this can cause erratic script behavior or show error messages even when no error is
present.
33.2. Operator Precedence
In a script, operations execute in order of precedence: the higher precedence operations execute before the
lower precedence ones. [113]
Table 33-1. Operator Precedence
Operator Meaning Comments
HIGHEST PRECEDENCE
var++ var-- post-increment, post-decrement C-style operators
Chapter 33. Miscellany 482](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-488-320.jpg)
![Advanced Bash-Scripting Guide
++var --var pre-increment, pre-decrement
! ~ negation logical / bitwise, inverts sense of
following operator
** exponentiation arithmetic operation
* / % multiplication, division, modulo arithmetic operation
+ - addition, subtraction arithmetic operation
<< >> left, right shift bitwise
-z -n unary comparison string is/is-not null
-e -f -t -x, etc. unary comparison file-test
< -lt > -gt <= -le >= -ge compound comparison string and integer
-nt -ot -ef compound comparison file-test
== -eq != -ne equality / inequality test operators, string and integer
& AND bitwise
^ XOR exclusive OR, bitwise
| OR bitwise
&& -a AND logical, compound comparison
|| -o OR logical, compound comparison
?: trinary operator C-style
= assignment (do not confuse with equality
test)
*= /= %= += -= <<= >>= &= combination assignment times-equal, divide-equal,
mod-equal, etc.
, comma links a sequence of operations
LOWEST PRECEDENCE
In practice, all you really need to remember is the following:
• The "My Dear Aunt Sally" mantra (multiply, divide, add, subtract) for the familiar arithmetic
operations.
• The compound logical operators, &&, ||, -a, and -o have low precedence.
• The order of evaluation of equal-precedence operators is usually left-to-right.
Now, let's utilize our knowledge of operator precedence to analyze a couple of lines from the
/etc/init.d/functions file, as found in the Fedora Core Linux distro.
while [ -n "$remaining" -a "$retry" -gt 0 ]; do
# This looks rather daunting at first glance.
Chapter 33. Miscellany 483](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-489-320.jpg)
![Advanced Bash-Scripting Guide
# Separate the conditions:
while [ -n "$remaining" -a "$retry" -gt 0 ]; do
# --condition 1-- ^^ --condition 2-
# If variable "$remaining" is not zero length
#+ AND (-a)
#+ variable "$retry" is greater-than zero
#+ then
#+ the [ expresion-within-condition-brackets ] returns success (0)
#+ and the while-loop executes an iteration.
# ==============================================================
# Evaluate "condition 1" and "condition 2" ***before***
#+ ANDing them. Why? Because the AND (-a) has a lower precedence
#+ than the -n and -gt operators,
#+ and therefore gets evaluated *last*.
#################################################################
if [ -f /etc/sysconfig/i18n -a -z "${NOLOCALE:-}" ] ; then
# Again, separate the conditions:
if [ -f /etc/sysconfig/i18n -a -z "${NOLOCALE:-}" ] ; then
# --condition 1--------- ^^ --condition 2-----
# If file "/etc/sysconfig/i18n" exists
#+ AND (-a)
#+ variable $NOLOCALE is zero length
#+ then
#+ the [ test-expresion-within-condition-brackets ] returns success (0)
#+ and the commands following execute.
#
# As before, the AND (-a) gets evaluated *last*
#+ because it has the lowest precedence of the operators within
#+ the test brackets.
# ==============================================================
# Note:
# ${NOLOCALE:-} is a parameter expansion that seems redundant.
# But, if $NOLOCALE has not been declared, it gets set to *null*,
#+ in effect declaring it.
# This makes a difference in some contexts.
To avoid confusion or error in a complex sequence of test operators, break up the sequence into
bracketed sections.
if [ "$v1" -gt "$v2" -o "$v1" -lt "$v2" -a -e "$filename" ]
# Unclear what's going on here...
if [[ "$v1" -gt "$v2" ]] || [[ "$v1" -lt "$v2" ]] && [[ -e "$filename" ]]
# Much better -- the condition tests are grouped in logical sections.
33.3. Shell Wrappers
A wrapper is a shell script that embeds a system command or utility, that accepts and passes a set of
parameters to that command. [114] Wrapping a script around a complex command-line simplifies invoking it.
Chapter 33. Miscellany 484](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-490-320.jpg)
![Advanced Bash-Scripting Guide
This is expecially useful with sed and awk.
A sed or awk script would normally be invoked from the command-line by a sed -e 'commands' or
awk 'commands'. Embedding such a script in a Bash script permits calling it more simply, and makes it
reusable. This also enables combining the functionality of sed and awk, for example piping the output of a set
of sed commands to awk. As a saved executable file, you can then repeatedly invoke it in its original form or
modified, without the inconvenience of retyping it on the command-line.
Example 33-1. shell wrapper
#!/bin/bash
# This simple script removes blank lines from a file.
# No argument checking.
#
# You might wish to add something like:
#
# E_NOARGS=85
# if [ -z "$1" ]
# then
# echo "Usage: `basename $0` target-file"
# exit $E_NOARGS
# fi
sed -e /^$/d "$1"
# Same as
# sed -e '/^$/d' filename
# invoked from the command-line.
# The '-e' means an "editing" command follows (optional here).
# '^' indicates the beginning of line, '$' the end.
# This matches lines with nothing between the beginning and the end --
#+ blank lines.
# The 'd' is the delete command.
# Quoting the command-line arg permits
#+ whitespace and special characters in the filename.
# Note that this script doesn't actually change the target file.
# If you need to do that, redirect its output.
exit
Example 33-2. A slightly more complex shell wrapper
#!/bin/bash
# subst.sh: a script that substitutes one pattern for
#+ another in a file,
#+ i.e., "sh subst.sh Smith Jones letter.txt".
# Jones replaces Smith.
ARGS=3 # Script requires 3 arguments.
E_BADARGS=85 # Wrong number of arguments passed to script.
if [ $# -ne "$ARGS" ]
Chapter 33. Miscellany 485](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-491-320.jpg)
![Advanced Bash-Scripting Guide
then
echo "Usage: `basename $0` old-pattern new-pattern filename"
exit $E_BADARGS
fi
old_pattern=$1
new_pattern=$2
if [ -f "$3" ]
then
file_name=$3
else
echo "File "$3" does not exist."
exit $E_BADARGS
fi
# -----------------------------------------------
# Here is where the heavy work gets done.
sed -e "s/$old_pattern/$new_pattern/g" $file_name
# -----------------------------------------------
# 's' is, of course, the substitute command in sed,
#+ and /pattern/ invokes address matching.
# The 'g,' or global flag causes substitution for EVERY
#+ occurence of $old_pattern on each line, not just the first.
# Read the 'sed' docs for an in-depth explanation.
exit $? # Redirect the output of this script to write to a file.
Example 33-3. A generic shell wrapper that writes to a logfile
#!/bin/bash
# Generic shell wrapper that performs an operation
#+ and logs it.
# Must set the following two variables.
OPERATION=
# Can be a complex chain of commands,
#+ for example an awk script or a pipe . . .
LOGFILE=
# Command-line arguments, if any, for the operation.
OPTIONS="$@"
# Log it.
echo "`date` + `whoami` + $OPERATION "$@"" >> $LOGFILE
# Now, do it.
exec $OPERATION "$@"
# It's necessary to do the logging before the operation.
# Why?
Example 33-4. A shell wrapper around an awk script
#!/bin/bash
# pr-ascii.sh: Prints a table of ASCII characters.
Chapter 33. Miscellany 486](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-492-320.jpg)
![Advanced Bash-Scripting Guide
START=33 # Range of printable ASCII characters (decimal).
END=127 # Will not work for unprintable characters (> 127).
echo " Decimal Hex Character" # Header.
echo " ------- --- ---------"
for ((i=START; i<=END; i++))
do
echo $i | awk '{printf(" %3d %2x %cn", $1, $1, $1)}'
# The Bash printf builtin will not work in this context:
# printf "%c" "$i"
done
exit 0
# Decimal Hex Character
# ------- --- ---------
# 33 21 !
# 34 22 "
# 35 23 #
# 36 24 $
#
# . . .
#
# 122 7a z
# 123 7b {
# 124 7c |
# 125 7d }
# Redirect the output of this script to a file
#+ or pipe it to "more": sh pr-asc.sh | more
Example 33-5. A shell wrapper around another awk script
#!/bin/bash
# Adds up a specified column (of numbers) in the target file.
# Floating-point (decimal) numbers okay, because awk can handle them.
ARGS=2
E_WRONGARGS=85
if [ $# -ne "$ARGS" ] # Check for proper number of command-line args.
then
echo "Usage: `basename $0` filename column-number"
exit $E_WRONGARGS
fi
filename=$1
column_number=$2
# Passing shell variables to the awk part of the script is a bit tricky.
# One method is to strong-quote the Bash-script variable
#+ within the awk script.
# $'$BASH_SCRIPT_VAR'
# ^ ^
# This is done in the embedded awk script below.
# See the awk documentation for more details.
Chapter 33. Miscellany 487](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-493-320.jpg)
![Advanced Bash-Scripting Guide
It is even possible to combine a Bash script and Perl script within the same file. Depending on how the script
is invoked, either the Bash part or the Perl part will execute.
Example 33-7. Bash and Perl scripts combined
#!/bin/bash
# bashandperl.sh
echo "Greetings from the Bash part of the script, $0."
# More Bash commands may follow here.
exit
# End of Bash part of the script.
# =======================================================
#!/usr/bin/perl
# This part of the script must be invoked with
# perl -x bashandperl.sh
print "Greetings from the Perl part of the script, $0.n";
# Perl doesn't seem to like "echo" ...
# More Perl commands may follow here.
# End of Perl part of the script.
bash$ bash bashandperl.sh
Greetings from the Bash part of the script.
bash$ perl -x bashandperl.sh
Greetings from the Perl part of the script.
One interesting example of a complex shell wrapper is Martin Matusiak's undvd script, which provides an
easy-to-use command-line interface to the complex mencoder utility. Another example is Itzchak Rehberg's
Ext3Undel, a set of scripts to recover deleted file on an ext3 filesystem.
33.4. Tests and Comparisons: Alternatives
For tests, the [[ ]] construct may be more appropriate than [ ]. Likewise, arithmetic comparisons might
benefit from the (( )) construct.
a=8
# All of the comparisons below are equivalent.
test "$a" -lt 16 && echo "yes, $a < 16" # "and list"
/bin/test "$a" -lt 16 && echo "yes, $a < 16"
[ "$a" -lt 16 ] && echo "yes, $a < 16"
[[ $a -lt 16 ]] && echo "yes, $a < 16" # Quoting variables within
(( a < 16 )) && echo "yes, $a < 16" # [[ ]] and (( )) not necessary.
city="New York"
# Again, all of the comparisons below are equivalent.
test "$city" < Paris && echo "Yes, Paris is greater than $city"
# Greater ASCII order.
Chapter 33. Miscellany 489](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-495-320.jpg)
![Advanced Bash-Scripting Guide
/bin/test "$city" < Paris && echo "Yes, Paris is greater than $city"
[ "$city" < Paris ] && echo "Yes, Paris is greater than $city"
[[ $city < Paris ]] && echo "Yes, Paris is greater than $city"
# Need not quote $city.
# Thank you, S.C.
33.5. A script calling itself (recursion)
Can a script recursively call itself? Indeed.
Example 33-8. A (useless) script that recursively calls itself
#!/bin/bash
# recurse.sh
# Can a script recursively call itself?
# Yes, but is this of any practical use?
# (See the following.)
RANGE=10
MAXVAL=9
i=$RANDOM
let "i %= $RANGE" # Generate a random number between 0 and $RANGE - 1.
if [ "$i" -lt "$MAXVAL" ]
then
echo "i = $i"
./$0 # Script recursively spawns a new instance of itself.
fi # Each child script does the same, until
#+ a generated $i equals $MAXVAL.
# Using a "while" loop instead of an "if/then" test causes problems.
# Explain why.
exit 0
# Note:
# ----
# This script must have execute permission for it to work properly.
# This is the case even if it is invoked by an "sh" command.
# Explain why.
Example 33-9. A (useful) script that recursively calls itself
#!/bin/bash
# pb.sh: phone book
# Written by Rick Boivie, and used with permission.
# Modifications by ABS Guide author.
MINARGS=1 # Script needs at least one argument.
DATAFILE=./phonebook
# A data file in current working directory
#+ named "phonebook" must exist.
Chapter 33. Miscellany 490](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-496-320.jpg)
![Advanced Bash-Scripting Guide
PROGNAME=$0
E_NOARGS=70 # No arguments error.
if [ $# -lt $MINARGS ]; then
echo "Usage: "$PROGNAME" data-to-look-up"
exit $E_NOARGS
fi
if [ $# -eq $MINARGS ]; then
grep $1 "$DATAFILE"
# 'grep' prints an error message if $DATAFILE not present.
else
( shift; "$PROGNAME" $* ) | grep $1
# Script recursively calls itself.
fi
exit 0 # Script exits here.
# Therefore, it's o.k. to put
#+ non-hashmarked comments and data after this point.
# ------------------------------------------------------------------------
Sample "phonebook" datafile:
John Doe 1555 Main St., Baltimore, MD 21228 (410) 222-3333
Mary Moe 9899 Jones Blvd., Warren, NH 03787 (603) 898-3232
Richard Roe 856 E. 7th St., New York, NY 10009 (212) 333-4567
Sam Roe 956 E. 8th St., New York, NY 10009 (212) 444-5678
Zoe Zenobia 4481 N. Baker St., San Francisco, SF 94338 (415) 501-1631
# ------------------------------------------------------------------------
$bash pb.sh Roe
Richard Roe 856 E. 7th St., New York, NY 10009 (212) 333-4567
Sam Roe 956 E. 8th St., New York, NY 10009 (212) 444-5678
$bash pb.sh Roe Sam
Sam Roe 956 E. 8th St., New York, NY 10009 (212) 444-5678
# When more than one argument is passed to this script,
#+ it prints *only* the line(s) containing all the arguments.
Example 33-10. Another (useful) script that recursively calls itself
#!/bin/bash
# usrmnt.sh, written by Anthony Richardson
# Used with permission.
# usage: usrmnt.sh
# description: mount device, invoking user must be listed in the
# MNTUSERS group in the /etc/sudoers file.
# ----------------------------------------------------------
# This is a usermount script that reruns itself using sudo.
# A user with the proper permissions only has to type
# usermount /dev/fd0 /mnt/floppy
# instead of
# sudo usermount /dev/fd0 /mnt/floppy
Chapter 33. Miscellany 491](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-497-320.jpg)
![Advanced Bash-Scripting Guide
# I use this same technique for all of my
#+ sudo scripts, because I find it convenient.
# ----------------------------------------------------------
# If SUDO_COMMAND variable is not set we are not being run through
#+ sudo, so rerun ourselves. Pass the user's real and group id . . .
if [ -z "$SUDO_COMMAND" ]
then
mntusr=$(id -u) grpusr=$(id -g) sudo $0 $*
exit 0
fi
# We will only get here if we are being run by sudo.
/bin/mount $* -o uid=$mntusr,gid=$grpusr
exit 0
# Additional notes (from the author of this script):
# -------------------------------------------------
# 1) Linux allows the "users" option in the /etc/fstab
# file so that any user can mount removable media.
# But, on a server, I like to allow only a few
# individuals access to removable media.
# I find using sudo gives me more control.
# 2) I also find sudo to be more convenient than
# accomplishing this task through groups.
# 3) This method gives anyone with proper permissions
# root access to the mount command, so be careful
# about who you allow access.
# You can get finer control over which access can be mounted
# by using this same technique in separate mntfloppy, mntcdrom,
# and mntsamba scripts.
Too many levels of recursion can exhaust the script's stack space, causing a segfault.
33.6. "Colorizing" Scripts
The ANSI [115] escape sequences set screen attributes, such as bold text, and color of foreground and
background. DOS batch files commonly used ANSI escape codes for color output, and so can Bash scripts.
Example 33-11. A "colorized" address database
#!/bin/bash
# ex30a.sh: "Colorized" version of ex30.sh.
# Crude address database
clear # Clear the screen.
echo -n " "
echo -e 'E[37;44m'"033[1mContact List033[0m"
# White on blue background
Chapter 33. Miscellany 492](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-498-320.jpg)
![Advanced Bash-Scripting Guide
echo; echo
echo -e "033[1mChoose one of the following persons:033[0m"
# Bold
tput sgr0 # Reset attributes.
echo "(Enter only the first letter of name.)"
echo
echo -en 'E[47;34m'"033[1mE033[0m" # Blue
tput sgr0 # Reset colors to "normal."
echo "vans, Roland" # "[E]vans, Roland"
echo -en 'E[47;35m'"033[1mJ033[0m" # Magenta
tput sgr0
echo "ones, Mildred"
echo -en 'E[47;32m'"033[1mS033[0m" # Green
tput sgr0
echo "mith, Julie"
echo -en 'E[47;31m'"033[1mZ033[0m" # Red
tput sgr0
echo "ane, Morris"
echo
read person
case "$person" in
# Note variable is quoted.
"E" | "e" )
# Accept upper or lowercase input.
echo
echo "Roland Evans"
echo "4321 Flash Dr."
echo "Hardscrabble, CO 80753"
echo "(303) 734-9874"
echo "(303) 734-9892 fax"
echo "revans@zzy.net"
echo "Business partner & old friend"
;;
"J" | "j" )
echo
echo "Mildred Jones"
echo "249 E. 7th St., Apt. 19"
echo "New York, NY 10009"
echo "(212) 533-2814"
echo "(212) 533-9972 fax"
echo "milliej@loisaida.com"
echo "Girlfriend"
echo "Birthday: Feb. 11"
;;
# Add info for Smith & Zane later.
* )
# Default option.
# Empty input (hitting RETURN) fits here, too.
echo
echo "Not yet in database."
;;
esac
tput sgr0 # Reset colors to "normal."
Chapter 33. Miscellany 493](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-499-320.jpg)
![Advanced Bash-Scripting Guide
echo
exit 0
Example 33-12. Drawing a box
#!/bin/bash
# Draw-box.sh: Drawing a box using ASCII characters.
# Script by Stefano Palmeri, with minor editing by document author.
# Minor edits suggested by Jim Angstadt.
# Used in the ABS Guide with permission.
######################################################################
### draw_box function doc ###
# The "draw_box" function lets the user
#+ draw a box in a terminal.
#
# Usage: draw_box ROW COLUMN HEIGHT WIDTH [COLOR]
# ROW and COLUMN represent the position
#+ of the upper left angle of the box you're going to draw.
# ROW and COLUMN must be greater than 0
#+ and less than current terminal dimension.
# HEIGHT is the number of rows of the box, and must be > 0.
# HEIGHT + ROW must be <= than current terminal height.
# WIDTH is the number of columns of the box and must be > 0.
# WIDTH + COLUMN must be <= than current terminal width.
#
# E.g.: If your terminal dimension is 20x80,
# draw_box 2 3 10 45 is good
# draw_box 2 3 19 45 has bad HEIGHT value (19+2 > 20)
# draw_box 2 3 18 78 has bad WIDTH value (78+3 > 80)
#
# COLOR is the color of the box frame.
# This is the 5th argument and is optional.
# 0=black 1=red 2=green 3=tan 4=blue 5=purple 6=cyan 7=white.
# If you pass the function bad arguments,
#+ it will just exit with code 65,
#+ and no messages will be printed on stderr.
#
# Clear the terminal before you start to draw a box.
# The clear command is not contained within the function.
# This allows the user to draw multiple boxes, even overlapping ones.
### end of draw_box function doc ###
######################################################################
draw_box(){
#=============#
HORZ="-"
VERT="|"
CORNER_CHAR="+"
MINARGS=4
E_BADARGS=65
#=============#
Chapter 33. Miscellany 494](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-500-320.jpg)
![Advanced Bash-Scripting Guide
if [ $# -lt "$MINARGS" ]; then # If args are less than 4, exit.
exit $E_BADARGS
fi
# Looking for non digit chars in arguments.
# Probably it could be done better (exercise for the reader?).
if echo $@ | tr -d [:blank:] | tr -d [:digit:] | grep . &> /dev/null; then
exit $E_BADARGS
fi
BOX_HEIGHT=`expr $3 - 1` # -1 correction needed because angle char "+"
BOX_WIDTH=`expr $4 - 1` #+ is a part of both box height and width.
T_ROWS=`tput lines` # Define current terminal dimension
T_COLS=`tput cols` #+ in rows and columns.
if [ $1 -lt 1 ] || [ $1 -gt $T_ROWS ]; then # Start checking if arguments
exit $E_BADARGS #+ are correct.
fi
if [ $2 -lt 1 ] || [ $2 -gt $T_COLS ]; then
exit $E_BADARGS
fi
if [ `expr $1 + $BOX_HEIGHT + 1` -gt $T_ROWS ]; then
exit $E_BADARGS
fi
if [ `expr $2 + $BOX_WIDTH + 1` -gt $T_COLS ]; then
exit $E_BADARGS
fi
if [ $3 -lt 1 ] || [ $4 -lt 1 ]; then
exit $E_BADARGS
fi # End checking arguments.
plot_char(){ # Function within a function.
echo -e "E[${1};${2}H"$3
}
echo -ne "E[3${5}m" # Set box frame color, if defined.
# start drawing the box
count=1 # Draw vertical lines using
for (( r=$1; count<=$BOX_HEIGHT; r++)); do #+ plot_char function.
plot_char $r $2 $VERT
let count=count+1
done
count=1
c=`expr $2 + $BOX_WIDTH`
for (( r=$1; count<=$BOX_HEIGHT; r++)); do
plot_char $r $c $VERT
let count=count+1
done
count=1 # Draw horizontal lines using
for (( c=$2; count<=$BOX_WIDTH; c++)); do #+ plot_char function.
plot_char $1 $c $HORZ
let count=count+1
done
count=1
r=`expr $1 + $BOX_HEIGHT`
for (( c=$2; count<=$BOX_WIDTH; c++)); do
plot_char $r $c $HORZ
Chapter 33. Miscellany 495](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-501-320.jpg)
![Advanced Bash-Scripting Guide
{
head -c10 /dev/urandom | md5sum | tr -d [a-z] | tr -d 0 | cut -c1
}
# Two functions that simulate "movement," when drawing the horses.
draw_horse_one() {
echo -n " "//$MOVE_HORSE//
}
draw_horse_two(){
echo -n " "$MOVE_HORSE
}
# Define current terminal dimension.
N_COLS=`tput cols`
N_LINES=`tput lines`
# Need at least a 20-LINES X 80-COLUMNS terminal. Check it.
if [ $N_COLS -lt 80 ] || [ $N_LINES -lt 20 ]; then
echo "`basename $0` needs a 80-cols X 20-lines terminal."
echo "Your terminal is ${N_COLS}-cols X ${N_LINES}-lines."
exit $E_RUNERR
fi
# Start drawing the race field.
# Need a string of 80 chars. See below.
BLANK80=`seq -s "" 100 | head -c80`
clear
# Set foreground and background colors to white.
echo -ne 'E[37;47m'
# Move the cursor on the upper left angle of the terminal.
tput cup 0 0
# Draw six white lines.
for n in `seq 5`; do
echo $BLANK80 # Use the 80 chars string to colorize the terminal.
done
# Sets foreground color to black.
echo -ne 'E[30m'
move_and_echo 3 1 "START 1"
move_and_echo 3 75 FINISH
move_and_echo 1 5 "|"
move_and_echo 1 80 "|"
move_and_echo 2 5 "|"
move_and_echo 2 80 "|"
move_and_echo 4 5 "| 2"
move_and_echo 4 80 "|"
move_and_echo 5 5 "V 3"
move_and_echo 5 80 "V"
# Set foreground color to red.
echo -ne 'E[31m'
# Some ASCII art.
move_and_echo 1 8 "..@@@..@@@@@...@@@@@.@...@..@@@@..."
Chapter 33. Miscellany 500](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-506-320.jpg)
![Advanced Bash-Scripting Guide
while ! echo $HANDICAP | grep [1-9] &> /dev/null; do
HANDICAP=`random_1_9`
done
# Define last handicap position for horse.
LHP=`expr $HANDICAP * 7 + 3`
for FILE in `seq 10 7 $LHP`; do
echo $HN >> $FILE
done
# Calculate odds.
case $HANDICAP in
1) ODDS=`echo $HANDICAP * 0.25 + 1.25 | bc`
echo $ODDS > odds_${HN}
;;
2 | 3) ODDS=`echo $HANDICAP * 0.40 + 1.25 | bc`
echo $ODDS > odds_${HN}
;;
4 | 5 | 6) ODDS=`echo $HANDICAP * 0.55 + 1.25 | bc`
echo $ODDS > odds_${HN}
;;
7 | 8) ODDS=`echo $HANDICAP * 0.75 + 1.25 | bc`
echo $ODDS > odds_${HN}
;;
9) ODDS=`echo $HANDICAP * 0.90 + 1.25 | bc`
echo $ODDS > odds_${HN}
esac
done
# Print odds.
print_odds() {
tput cup 6 0
echo -ne 'E[30;42m'
for HN in `seq 9`; do
echo "#$HN odds->" `cat odds_${HN}`
done
}
# Draw the horses at starting line.
draw_horses() {
tput cup 6 0
echo -ne 'E[30;42m'
for HN in `seq 9`; do
echo /$HN/" "
done
}
print_odds
echo -ne 'E[47m'
# Wait for a enter key press to start the race.
# The escape sequence 'E[?25l' disables the cursor.
tput cup 17 0
echo -e 'E[?25l'Press [enter] key to start the race...
read -s
# Disable normal echoing in the terminal.
# This avoids key presses that might "contaminate" the screen
#+ during the race.
stty -echo
Chapter 33. Miscellany 502](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-508-320.jpg)
![Advanced Bash-Scripting Guide
# --------------------------------------------------------
# Start the race.
draw_horses
echo -ne 'E[37;47m'
move_and_echo 18 1 $BLANK80
echo -ne 'E[30m'
move_and_echo 18 1 Starting...
sleep 1
# Set the column of the finish line.
WINNING_POS=74
# Define the time the race started.
START_TIME=`date +%s`
# COL variable needed by following "while" construct.
COL=0
while [ $COL -lt $WINNING_POS ]; do
MOVE_HORSE=0
# Check if the random_1_9 function has returned a good value.
while ! echo $MOVE_HORSE | grep [1-9] &> /dev/null; do
MOVE_HORSE=`random_1_9`
done
# Define old type and position of the "randomized horse".
HORSE_TYPE=`cat horse_${MOVE_HORSE}_position | tail -n 1`
COL=$(expr `cat horse_${MOVE_HORSE}_position | head -n 1`)
ADD_POS=1
# Check if the current position is an handicap position.
if seq 10 7 68 | grep -w $COL &> /dev/null; then
if grep -w $MOVE_HORSE $COL &> /dev/null; then
ADD_POS=0
grep -v -w $MOVE_HORSE $COL > ${COL}_new
rm -f $COL
mv -f ${COL}_new $COL
else ADD_POS=1
fi
else ADD_POS=1
fi
COL=`expr $COL + $ADD_POS`
echo $COL > horse_${MOVE_HORSE}_position # Store new position.
# Choose the type of horse to draw.
case $HORSE_TYPE in
1) HORSE_TYPE=2; DRAW_HORSE=draw_horse_two
;;
2) HORSE_TYPE=1; DRAW_HORSE=draw_horse_one
esac
echo $HORSE_TYPE >> horse_${MOVE_HORSE}_position
# Store current type.
# Set foreground color to black and background to green.
echo -ne 'E[30;42m'
# Move the cursor to new horse position.
tput cup `expr $MOVE_HORSE + 5`
Chapter 33. Miscellany 503](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-509-320.jpg)
![Advanced Bash-Scripting Guide
`cat horse_${MOVE_HORSE}_position | head -n 1`
# Draw the horse.
$DRAW_HORSE
usleep $USLEEP_ARG
# When all horses have gone beyond field line 15, reprint odds.
touch fieldline15
if [ $COL = 15 ]; then
echo $MOVE_HORSE >> fieldline15
fi
if [ `wc -l fieldline15 | cut -f1 -d " "` = 9 ]; then
print_odds
: > fieldline15
fi
# Define the leading horse.
HIGHEST_POS=`cat *position | sort -n | tail -1`
# Set background color to white.
echo -ne 'E[47m'
tput cup 17 0
echo -n Current leader: `grep -w $HIGHEST_POS *position | cut -c7`
" "
done
# Define the time the race finished.
FINISH_TIME=`date +%s`
# Set background color to green and enable blinking text.
echo -ne 'E[30;42m'
echo -en 'E[5m'
# Make the winning horse blink.
tput cup `expr $MOVE_HORSE + 5`
`cat horse_${MOVE_HORSE}_position | head -n 1`
$DRAW_HORSE
# Disable blinking text.
echo -en 'E[25m'
# Set foreground and background color to white.
echo -ne 'E[37;47m'
move_and_echo 18 1 $BLANK80
# Set foreground color to black.
echo -ne 'E[30m'
# Make winner blink.
tput cup 17 0
echo -e "E[5mWINNER: $MOVE_HORSEE[25m"" Odds: `cat odds_${MOVE_HORSE}`"
" Race time: `expr $FINISH_TIME - $START_TIME` secs"
# Restore cursor and old colors.
echo -en "E[?25h"
echo -en "E[0m"
# Restore echoing.
stty echo
# Remove race temp directory.
Chapter 33. Miscellany 504](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-510-320.jpg)
![Advanced Bash-Scripting Guide
rm -rf $HORSE_RACE_TMP_DIR
tput cup 19 0
exit 0
See also Example A-21, Example A-44, Example A-52, and Example A-40.
There is, however, a major problem with all this. ANSI escape sequences are emphatically non-portable.
What works fine on some terminal emulators (or the console) may work differently, or not at all, on
others. A "colorized" script that looks stunning on the script author's machine may produce unreadable
output on someone else's. This somewhat compromises the usefulness of colorizing scripts, and possibly
relegates this technique to the status of a gimmick. Colorized scripts are probably inappropriate in a
commercial setting, i.e., your supervisor might disapprove.
Moshe Jacobson's color utility (http://runslinux.net/projects.html#color) considerably simplifies using ANSI
escape sequences. It substitutes a clean and logical syntax for the clumsy constructs just discussed.
Henry/teikedvl has likewise created a utility (http://scriptechocolor.sourceforge.net/) to simplify creation of
colorized scripts.
33.7. Optimizations
Most shell scripts are quick 'n dirty solutions to non-complex problems. As such, optimizing them for speed is
not much of an issue. Consider the case, though, where a script carries out an important task, does it well, but
runs too slowly. Rewriting it in a compiled language may not be a palatable option. The simplest fix would be
to rewrite the parts of the script that slow it down. Is it possible to apply principles of code optimization even
to a lowly shell script?
Check the loops in the script. Time consumed by repetitive operations adds up quickly. If at all possible,
remove time-consuming operations from within loops.
Use builtin commands in preference to system commands. Builtins execute faster and usually do not launch a
subshell when invoked.
Avoid unnecessary commands, particularly in a pipe.
cat "$file" | grep "$word"
grep "$word" "$file"
# The above command-lines have an identical effect,
#+ but the second runs faster since it launches one fewer subprocess.
The cat command seems especially prone to overuse in scripts.
Use the time and times tools to profile computation-intensive commands. Consider rewriting time-critical
code sections in C, or even in assembler.
Try to minimize file I/O. Bash is not particularly efficient at handling files, so consider using more
appropriate tools for this within the script, such as awk or Perl.
Write your scripts in a modular and coherent form, [116] so they can be reorganized and tightened up as
Chapter 33. Miscellany 505](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-511-320.jpg)
![Advanced Bash-Scripting Guide
necessary. Some of the optimization techniques applicable to high-level languages may work for scripts, but
others, such as loop unrolling, are mostly irrelevant. Above all, use common sense.
For an excellent demonstration of how optimization can dramatically reduce the execution time of a script, see
Example 15-47.
33.8. Assorted Tips
33.8.1. Ideas for more powerful scripts
•
You have a problem that you want to solve by writing a Bash script. Unfortunately, you don't know
quite where to start. One method is to plunge right in and code those parts of the script that come
easily, and write the hard parts as pseudo-code.
#!/bin/bash
ARGCOUNT=1 # Need name as argument.
E_WRONGARGS=65
if [ number-of-arguments is-not-equal-to "$ARGCOUNT" ]
# ^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^
# Can't figure out how to code this . . .
#+ . . . so write it in pseudo-code.
then
echo "Usage: name-of-script name"
# ^^^^^^^^^^^^^^ More pseudo-code.
exit $E_WRONGARGS
fi
. . .
exit 0
# Later on, substitute working code for the pseudo-code.
# Line 6 becomes:
if [ $# -ne "$ARGCOUNT" ]
# Line 12 becomes:
echo "Usage: `basename $0` name"
For an example of using pseudo-code, see the Square Root exercise.
•
To keep a record of which user scripts have run during a particular session or over a number of
sessions, add the following lines to each script you want to keep track of. This will keep a continuing
file record of the script names and invocation times.
# Append (>>) following to end of each script tracked.
whoami>> $SAVE_FILE # User invoking the script.
echo $0>> $SAVE_FILE # Script name.
date>> $SAVE_FILE # Date and time.
echo>> $SAVE_FILE # Blank line as separator.
Chapter 33. Miscellany 506](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-512-320.jpg)
![Advanced Bash-Scripting Guide
# Of course, SAVE_FILE defined and exported as environmental variable in ~/.bashrc
#+ (something like ~/.scripts-run)
•
The >> operator appends lines to a file. What if you wish to prepend a line to an existing file, that is,
to paste it in at the beginning?
file=data.txt
title="***This is the title line of data text file***"
echo $title | cat - $file >$file.new
# "cat -" concatenates stdout to $file.
# End result is
#+ to write a new file with $title appended at *beginning*.
This is a simplified variant of the Example 18-13 script given earlier. And, of course, sed can also do
this.
•
A shell script may act as an embedded command inside another shell script, a Tcl or wish script, or
even a Makefile. It can be invoked as an external shell command in a C program using the
system() call, i.e., system("script_name");.
•
Setting a variable to the contents of an embedded sed or awk script increases the readability of the
surrounding shell wrapper. See Example A-1 and Example 14-20.
•
Put together files containing your favorite and most useful definitions and functions. As necessary,
"include" one or more of these "library files" in scripts with either the dot (.) or source command.
# SCRIPT LIBRARY
# ------ -------
# Note:
# No "#!" here.
# No "live code" either.
# Useful variable definitions
ROOT_UID=0 # Root has $UID 0.
E_NOTROOT=101 # Not root user error.
MAXRETVAL=255 # Maximum (positive) return value of a function.
SUCCESS=0
FAILURE=-1
# Functions
Usage () # "Usage:" message.
{
if [ -z "$1" ] # No arg passed.
then
msg=filename
else
msg=$@
fi
echo "Usage: `basename $0` "$msg""
}
Chapter 33. Miscellany 507](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-513-320.jpg)
![Advanced Bash-Scripting Guide
Check_if_root () # Check if root running script.
{ # From "ex39.sh" example.
if [ "$UID" -ne "$ROOT_UID" ]
then
echo "Must be root to run this script."
exit $E_NOTROOT
fi
}
CreateTempfileName () # Creates a "unique" temp filename.
{ # From "ex51.sh" example.
prefix=temp
suffix=`eval date +%s`
Tempfilename=$prefix.$suffix
}
isalpha2 () # Tests whether *entire string* is alphabetic.
{ # From "isalpha.sh" example.
[ $# -eq 1 ] || return $FAILURE
case $1 in
*[!a-zA-Z]*|"") return $FAILURE;;
*) return $SUCCESS;;
esac # Thanks, S.C.
}
abs () # Absolute value.
{ # Caution: Max return value = 255.
E_ARGERR=-999999
if [ -z "$1" ] # Need arg passed.
then
return $E_ARGERR # Obvious error value returned.
fi
if [ "$1" -ge 0 ] # If non-negative,
then #
absval=$1 # stays as-is.
else # Otherwise,
let "absval = (( 0 - $1 ))" # change sign.
fi
return $absval
}
tolower () # Converts string(s) passed as argument(s)
{ #+ to lowercase.
if [ -z "$1" ] # If no argument(s) passed,
then #+ send error message
echo "(null)" #+ (C-style void-pointer error message)
return #+ and return from function.
fi
echo "$@" | tr A-Z a-z
# Translate all passed arguments ($@).
Chapter 33. Miscellany 508](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-514-320.jpg)
![Advanced Bash-Scripting Guide
return
# Use command substitution to set a variable to function output.
# For example:
# oldvar="A seT of miXed-caSe LEtTerS"
# newvar=`tolower "$oldvar"`
# echo "$newvar" # a set of mixed-case letters
#
# Exercise: Rewrite this function to change lowercase passed argument(s)
# to uppercase ... toupper() [easy].
}
•
Use special-purpose comment headers to increase clarity and legibility in scripts.
## Caution.
rm -rf *.zzy ## The "-rf" options to "rm" are very dangerous,
##+ especially with wild cards.
#+ Line continuation.
# This is line 1
#+ of a multi-line comment,
#+ and this is the final line.
#* Note.
#o List item.
#> Another point of view.
while [ "$var1" != "end" ] #> while test "$var1" != "end"
•
Dotan Barak contributes template code for a progress bar in a script.
Example 33-15. A Progress Bar
#!/bin/bash
# progress-bar.sh
# Author: Dotan Barak (very minor revisions by ABS Guide author).
# Used in ABS Guide with permission (thanks!).
BAR_WIDTH=50
BAR_CHAR_START="["
BAR_CHAR_END="]"
BAR_CHAR_EMPTY="."
BAR_CHAR_FULL="="
BRACKET_CHARS=2
LIMIT=100
print_progress_bar()
{
# Calculate how many characters will be full.
let "full_limit = ((($1 - $BRACKET_CHARS) * $2) / $LIMIT)"
# Calculate how many characters will be empty.
let "empty_limit = ($1 - $BRACKET_CHARS) - ${full_limit}"
# Prepare the bar.
Chapter 33. Miscellany 509](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-515-320.jpg)
![Advanced Bash-Scripting Guide
bar_line="${BAR_CHAR_START}"
for ((j=0; j<full_limit; j++)); do
bar_line="${bar_line}${BAR_CHAR_FULL}"
done
for ((j=0; j<empty_limit; j++)); do
bar_line="${bar_line}${BAR_CHAR_EMPTY}"
done
bar_line="${bar_line}${BAR_CHAR_END}"
printf "%3d%% %s" $2 ${bar_line}
}
# Here is a sample of code that uses it.
MAX_PERCENT=100
for ((i=0; i<=MAX_PERCENT; i++)); do
#
usleep 10000
# ... Or run some other commands ...
#
print_progress_bar ${BAR_WIDTH} ${i}
echo -en "r"
done
echo ""
exit
•
A particularly clever use of if-test constructs is for comment blocks.
#!/bin/bash
COMMENT_BLOCK=
# Try setting the above variable to some value
#+ for an unpleasant surprise.
if [ $COMMENT_BLOCK ]; then
Comment block --
=================================
This is a comment line.
This is another comment line.
This is yet another comment line.
=================================
echo "This will not echo."
Comment blocks are error-free! Whee!
fi
echo "No more comments, please."
exit 0
Compare this with using here documents to comment out code blocks.
•
Using the $? exit status variable, a script may test if a parameter contains only digits, so it can be
treated as an integer.
Chapter 33. Miscellany 510](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-516-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
SUCCESS=0
E_BADINPUT=85
test "$1" -ne 0 -o "$1" -eq 0 2>/dev/null
# An integer is either equal to 0 or not equal to 0.
# 2>/dev/null suppresses error message.
if [ $? -ne "$SUCCESS" ]
then
echo "Usage: `basename $0` integer-input"
exit $E_BADINPUT
fi
let "sum = $1 + 25" # Would give error if $1 not integer.
echo "Sum = $sum"
# Any variable, not just a command-line parameter, can be tested this way.
exit 0
• The 0 - 255 range for function return values is a severe limitation. Global variables and other
workarounds are often problematic. An alternative method for a function to communicate a value
back to the main body of the script is to have the function write to stdout (usually with echo) the
"return value," and assign this to a variable. This is actually a variant of command substitution.
Example 33-16. Return value trickery
#!/bin/bash
# multiplication.sh
multiply () # Multiplies params passed.
{ # Will accept a variable number of args.
local product=1
until [ -z "$1" ] # Until uses up arguments passed...
do
let "product *= $1"
shift
done
echo $product # Will not echo to stdout,
} #+ since this will be assigned to a variable.
mult1=15383; mult2=25211
val1=`multiply $mult1 $mult2`
echo "$mult1 X $mult2 = $val1"
# 387820813
mult1=25; mult2=5; mult3=20
val2=`multiply $mult1 $mult2 $mult3`
echo "$mult1 X $mult2 X $mult3 = $val2"
# 2500
mult1=188; mult2=37; mult3=25; mult4=47
val3=`multiply $mult1 $mult2 $mult3 $mult4`
echo "$mult1 X $mult2 X $mult3 X $mult4 = $val3"
# 8173300
Chapter 33. Miscellany 511](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-517-320.jpg)
![Advanced Bash-Scripting Guide
sum_and_product ()
{
echo "This is the sum_and_product function." # This messes things up!
echo $(( $1 + $2 )) $(( $1 * $2 ))
}
...
retval=`sum_and_product $first $second` # Assigns output of function.
# Now, this will not work correctly.
•
Next in our bag of tricks are techniques for passing an array to a function, then "returning" an array
back to the main body of the script.
Passing an array involves loading the space-separated elements of the array into a variable with
command substitution. Getting an array back as the "return value" from a function uses the previously
mentioned strategem of echoing the array in the function, then invoking command substitution and
the ( ... ) operator to assign it to an array.
Example 33-18. Passing and returning arrays
#!/bin/bash
# array-function.sh: Passing an array to a function and ...
# "returning" an array from a function
Pass_Array ()
{
local passed_array # Local variable!
passed_array=( `echo "$1"` )
echo "${passed_array[@]}"
# List all the elements of the new array
#+ declared and set within the function.
}
original_array=( element1 element2 element3 element4 element5 )
echo
echo "original_array = ${original_array[@]}"
# List all elements of original array.
# This is the trick that permits passing an array to a function.
# **********************************
argument=`echo ${original_array[@]}`
# **********************************
# Pack a variable
#+ with all the space-separated elements of the original array.
#
# Attempting to just pass the array itself will not work.
# This is the trick that allows grabbing an array as a "return value".
# *****************************************
returned_array=( `Pass_Array "$argument"` )
# *****************************************
# Assign 'echoed' output of function to array variable.
echo "returned_array = ${returned_array[@]}"
Chapter 33. Miscellany 513](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-519-320.jpg)
![Advanced Bash-Scripting Guide
echo "============================================================="
# Now, try it again,
#+ attempting to access (list) the array from outside the function.
Pass_Array "$argument"
# The function itself lists the array, but ...
#+ accessing the array from outside the function is forbidden.
echo "Passed array (within function) = ${passed_array[@]}"
# NULL VALUE since the array is a variable local to the function.
echo
############################################
# And here is an even more explicit example:
ret_array ()
{
for element in {11..20}
do
echo "$element " # Echo individual elements
done #+ of what will be assembled into an array.
}
arr=( $(ret_array) ) # Assemble into array.
echo "Capturing array "arr" from function ret_array () ..."
echo "Third element of array "arr" is ${arr[2]}." # 13 (zero-indexed)
echo -n "Entire array is: "
echo ${arr[@]} # 11 12 13 14 15 16 17 18 19 20
echo
exit 0
For a more elaborate example of passing arrays to functions, see Example A-10.
•
Using the double-parentheses construct, it is possible to use C-style syntax for setting and
incrementing/decrementing variables and in for and while loops. See Example 10-12 and Example
10-17.
•
Setting the path and umask at the beginning of a script makes it more "portable" -- more likely to run
on a "foreign" machine whose user may have bollixed up the $PATH and umask.
#!/bin/bash
PATH=/bin:/usr/bin:/usr/local/bin ; export PATH
umask 022 # Files that the script creates will have 755 permission.
# Thanks to Ian D. Allen, for this tip.
•
A useful scripting technique is to repeatedly feed the output of a filter (by piping) back to the same
filter, but with a different set of arguments and/or options. Especially suitable for this are tr and grep.
# From "wstrings.sh" example.
wlist=`strings "$1" | tr A-Z a-z | tr '[:space:]' Z |
tr -cs '[:alpha:]' Z | tr -s '173-377' Z | tr Z ' '`
Chapter 33. Miscellany 514](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-520-320.jpg)
![Advanced Bash-Scripting Guide
#+ the $CMD exists on the system.
# (Thanks, bojster.)
if [[ -z "$command_test" ]] # Check whether command present.
then
$CMD option1 option2 # Run command1 with options.
else # Otherwise,
$PlanB #+ run command2.
fi
•
An if-grep test may not return expected results in an error case, when text is output to stderr, rather
that stdout.
if ls -l nonexistent_filename | grep -q 'No such file or directory'
then echo "File "nonexistent_filename" does not exist."
fi
Redirecting stderr to stdout fixes this.
if ls -l nonexistent_filename 2>&1 | grep -q 'No such file or directory'
# ^^^^
then echo "File "nonexistent_filename" does not exist."
fi
# Thanks, Chris Martin, for pointing this out.
• If you absolutely must access a subshell variable outside the subshell, here's a way to do it.
TMPFILE=tmpfile # Create a temp file to store the variable.
( # Inside the subshell ...
inner_variable=Inner
echo $inner_variable
echo $inner_variable >>$TMPFILE # Append to temp file.
)
# Outside the subshell ...
echo; echo "-----"; echo
echo $inner_variable # Null, as expected.
echo "-----"; echo
# Now ...
read inner_variable <$TMPFILE # Read back shell variable.
rm -f "$TMPFILE" # Get rid of temp file.
echo "$inner_variable" # It's an ugly kludge, but it works.
•
The run-parts command is handy for running a set of command scripts in a particular sequence,
especially in combination with cron or at.
•
For doing multiple revisions on a complex script, use the rcs Revision Control System package.
Among other benefits of this is automatically updated ID header tags. The co command in rcs does a
parameter replacement of certain reserved key words, for example, replacing # $Id$ in a script with
something like:
# $Id: hello-world.sh,v 1.1 2004/10/16 02:43:05 bozo Exp $
Chapter 33. Miscellany 516](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-522-320.jpg)
![Advanced Bash-Scripting Guide
33.8.2. Widgets
It would be nice to be able to invoke X-Windows widgets from a shell script. There happen to exist several
packages that purport to do so, namely Xscript, Xmenu, and widtools. The first two of these no longer seem to
be maintained. Fortunately, it is still possible to obtain widtools here.
The widtools (widget tools) package requires the XForms library to be installed. Additionally, the
Makefile needs some judicious editing before the package will build on a typical Linux system. Finally,
three of the six widgets offered do not work (and, in fact, segfault).
The dialog family of tools offers a method of calling "dialog" widgets from a shell script. The original dialog
utility works in a text console, but its successors, gdialog, Xdialog, and kdialog use X-Windows-based widget
sets.
Example 33-20. Widgets invoked from a shell script
#!/bin/bash
# dialog.sh: Using 'gdialog' widgets.
# Must have 'gdialog' installed on your system to run this script.
# Or, you can replace all instance of 'gdialog' below with 'kdialog' ...
# Version 1.1 (corrected 04/05/05)
# This script was inspired by the following article.
# "Scripting for X Productivity," by Marco Fioretti,
# LINUX JOURNAL, Issue 113, September 2003, pp. 86-9.
# Thank you, all you good people at LJ.
# Input error in dialog box.
E_INPUT=65
# Dimensions of display, input widgets.
HEIGHT=50
WIDTH=60
# Output file name (constructed out of script name).
OUTFILE=$0.output
# Display this script in a text widget.
gdialog --title "Displaying: $0" --textbox $0 $HEIGHT $WIDTH
# Now, we'll try saving input in a file.
echo -n "VARIABLE=" > $OUTFILE
gdialog --title "User Input" --inputbox "Enter variable, please:"
$HEIGHT $WIDTH 2>> $OUTFILE
if [ "$?" -eq 0 ]
# It's good practice to check exit status.
then
echo "Executed "dialog box" without errors."
else
echo "Error(s) in "dialog box" execution."
Chapter 33. Miscellany 517](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-523-320.jpg)
![Advanced Bash-Scripting Guide
# Or, clicked on "Cancel", instead of "OK" button.
rm $OUTFILE
exit $E_INPUT
fi
# Now, we'll retrieve and display the saved variable.
. $OUTFILE # 'Source' the saved file.
echo "The variable input in the "input box" was: "$VARIABLE""
rm $OUTFILE # Clean up by removing the temp file.
# Some applications may need to retain this file.
exit $?
# Exercise: Rewrite this script using the 'zenity' widget set.
The xmessage command is a simple method of popping up a message/query window. For example:
xmessage Fatal error in script! -button exit
The latest entry in the widget sweepstakes is zenity. This utility pops up GTK+ dialog widgets-and-windows,
and it works very nicely within a script.
get_info ()
{
zenity --entry # Pops up query window . . .
#+ and prints user entry to stdout.
# Also try the --calendar and --scale options.
}
answer=$( get_info ) # Capture stdout in $answer variable.
echo "User entered: "$answer""
For other methods of scripting with widgets, try Tk or wish (Tcl derivatives), PerlTk (Perl with Tk
extensions), tksh (ksh with Tk extensions), XForms4Perl (Perl with XForms extensions), Gtk-Perl (Perl with
Gtk extensions), or PyQt (Python with Qt extensions).
33.9. Security Issues
33.9.1. Infected Shell Scripts
A brief warning about script security is indicated. A shell script may contain a worm, trojan, or even a virus.
For that reason, never run as root a script (or permit it to be inserted into the system startup scripts in
/etc/rc.d) unless you have obtained said script from a trusted source or you have carefully analyzed it to
make certain it does nothing harmful.
Various researchers at Bell Labs and other sites, including M. Douglas McIlroy, Tom Duff, and Fred Cohen
have investigated the implications of shell script viruses. They conclude that it is all too easy for even a
novice, a "script kiddie," to write one. [117]
Here is yet another reason to learn scripting. Being able to look at and understand scripts may protect your
system from being compromised by a rogue script.
Chapter 33. Miscellany 518](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-524-320.jpg)
![Advanced Bash-Scripting Guide
33.9.2. Hiding Shell Script Source
For security purposes, it may be necessary to render a script unreadable. If only there were a utility to create a
stripped binary executable from a script. Francisco Rosales' shc -- generic shell script compiler does exactly
that.
Unfortunately, according to an article in the October, 2005 Linux Journal, the binary can, in at least some
cases, be decrypted to recover the original script source. Still, this could be a useful method of keeping scripts
secure from all but the most skilled hackers.
33.9.3. Writing Secure Shell Scripts
Dan Stromberg suggests the following guidelines for writing (relatively) secure shell scripts.
• Don't put secret data in environment variables.
• Don't pass secret data in an external command's arguments (pass them in via a pipe or redirection
instead).
• Set your $PATH carefully. Don't just trust whatever path you inherit from the caller if your script is
running as root. In fact, whenever you use an environment variable inherited from the caller, think
about what could happen if the caller put something misleading in the variable, e.g., if the caller set
$HOME to /etc.
33.10. Portability Issues
It is easier to port a shell than a shell script.
--Larry Wall
This book deals specifically with Bash scripting on a GNU/Linux system. All the same, users of sh and ksh
will find much of value here.
As it happens, many of the various shells and scripting languages seem to be converging toward the POSIX
1003.2 standard. Invoking Bash with the --posix option or inserting a set -o posix at the head of a script
causes Bash to conform very closely to this standard. Another alternative is to use a #!/bin/sh sha-bang header
in the script, rather than #!/bin/bash. [118] Note that /bin/sh is a link to /bin/bash in Linux and certain
other flavors of UNIX, and a script invoked this way disables extended Bash functionality.
Most Bash scripts will run as-is under ksh, and vice-versa, since Chet Ramey has been busily porting ksh
features to the latest versions of Bash.
On a commercial UNIX machine, scripts using GNU-specific features of standard commands may not work.
This has become less of a problem in the last few years, as the GNU utilities have pretty much displaced their
proprietary counterparts even on "big-iron" UNIX. Caldera's release of the source to many of the original
UNIX utilities has accelerated the trend.
Bash has certain features that the traditional Bourne shell lacks. Among these are:
Chapter 33. Miscellany 519](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-525-320.jpg)
![Advanced Bash-Scripting Guide
• Certain extended invocation options
• Command substitution using $( ) notation
• Brace expansion
• Certain array operations, and associative arrays
• The double brackets extended test construct
• The double-parentheses arithmetic-evaluation construct
• Certain string manipulation operations
• Process substitution
• A Regular Expression matching operator
• Bash-specific builtins
• Coprocesses
See the Bash F.A.Q. for a complete listing.
33.10.1. A Test Suite
Let us illustrate some of the incompatibilities between Bash and the classic Bourne shell. Download and
install the "Heirloom Bourne Shell" and run the following script, first using Bash, then the classic sh.
Example 33-21. Test Suite
#!/bin/bash
# test-suite.sh
# A partial Bash compatibility test suite.
# Double brackets (test)
String="Double brackets supported?"
echo -n "Double brackets test: "
if [[ "$String" = "Double brackets supported?" ]]
then
echo "PASS"
else
echo "FAIL"
fi
# Double brackets and regex matching
String="Regex matching supported?"
echo -n "Regex matching: "
if [[ "$String" =~ R.....matching* ]]
then
echo "PASS"
else
echo "FAIL"
fi
# Arrays
test_arr=FAIL
Array=( If supports arrays will print PASS )
test_arr=${Array[5]}
echo "Array test: $test_arr"
# Completing this script is an exercise for the reader.
Chapter 33. Miscellany 520](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-526-320.jpg)
![Advanced Bash-Scripting Guide
echo
echo "Catalog number $catalog_number:"
# Now, retrieve value, using indirect referencing.
echo "There are ${!Inv} of [${!Val} ohm / ${!Pdissip} watt]
resistors in stock." # ^ ^
echo "These are located in bin # ${!Loc}."
echo "Their color code is "${!Ccode}"."
break
done
echo; echo
# Exercises:
# ---------
# 1) Rewrite this script to read its data from an external file.
# 2) Rewrite this script to use arrays,
#+ rather than indirect variable referencing.
# Which method is more straightforward and intuitive?
# Which method is easier to code?
# Notes:
# -----
# Shell scripts are inappropriate for anything except the most simple
#+ database applications, and even then it involves workarounds and kludges.
# Much better is to use a language with native support for data structures,
#+ such as C++ or Java (or even Perl).
exit 0
Example 34-4. Using arrays and other miscellaneous trickery to deal four random hands from a deck of
cards
#!/bin/bash
# cards.sh
# Deals four random hands from a deck of cards.
UNPICKED=0
PICKED=1
DUPE_CARD=99
LOWER_LIMIT=0
UPPER_LIMIT=51
CARDS_IN_SUIT=13
CARDS=52
declare -a Deck
declare -a Suits
declare -a Cards
# It would have been easier to implement and more intuitive
#+ with a single, 3-dimensional array.
# Perhaps a future version of Bash will support multidimensional arrays.
initialize_Deck ()
{
i=$LOWER_LIMIT
until [ "$i" -gt $UPPER_LIMIT ]
Chapter 34. Bash, versions 2, 3, and 4 524](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-530-320.jpg)
![Advanced Bash-Scripting Guide
do
Deck[i]=$UNPICKED # Set each card of "Deck" as unpicked.
let "i += 1"
done
echo
}
initialize_Suits ()
{
Suits[0]=C #Clubs
Suits[1]=D #Diamonds
Suits[2]=H #Hearts
Suits[3]=S #Spades
}
initialize_Cards ()
{
Cards=(2 3 4 5 6 7 8 9 10 J Q K A)
# Alternate method of initializing an array.
}
pick_a_card ()
{
card_number=$RANDOM
let "card_number %= $CARDS" # Restrict range to 0 - 51, i.e., 52 cards.
if [ "${Deck[card_number]}" -eq $UNPICKED ]
then
Deck[card_number]=$PICKED
return $card_number
else
return $DUPE_CARD
fi
}
parse_card ()
{
number=$1
let "suit_number = number / CARDS_IN_SUIT"
suit=${Suits[suit_number]}
echo -n "$suit-"
let "card_no = number % CARDS_IN_SUIT"
Card=${Cards[card_no]}
printf %-4s $Card
# Print cards in neat columns.
}
seed_random () # Seed random number generator.
{ # What happens if you don't do this?
seed=`eval date +%s`
let "seed %= 32766"
RANDOM=$seed
# What are some other methods
#+ of seeding the random number generator?
}
deal_cards ()
{
echo
cards_picked=0
while [ "$cards_picked" -le $UPPER_LIMIT ]
do
Chapter 34. Bash, versions 2, 3, and 4 525](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-531-320.jpg)
![Advanced Bash-Scripting Guide
pick_a_card
t=$?
if [ "$t" -ne $DUPE_CARD ]
then
parse_card $t
u=$cards_picked+1
# Change back to 1-based indexing (temporarily). Why?
let "u %= $CARDS_IN_SUIT"
if [ "$u" -eq 0 ] # Nested if/then condition test.
then
echo
echo
fi # Each hand set apart with a blank line.
let "cards_picked += 1"
fi
done
echo
return 0
}
# Structured programming:
# Entire program logic modularized in functions.
#===============
seed_random
initialize_Deck
initialize_Suits
initialize_Cards
deal_cards
#===============
exit
# Exercise 1:
# Add comments to thoroughly document this script.
# Exercise 2:
# Add a routine (function) to print out each hand sorted in suits.
# You may add other bells and whistles if you like.
# Exercise 3:
# Simplify and streamline the logic of the script.
34.2. Bash, version 3
On July 27, 2004, Chet Ramey released version 3 of Bash. This update fixed quite a number of bugs and
added new features.
Some of the more important added features:
Chapter 34. Bash, versions 2, 3, and 4 526](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-532-320.jpg)
![Advanced Bash-Scripting Guide
• A new, more generalized {a..z} brace expansion operator.
#!/bin/bash
for i in {1..10}
# Simpler and more straightforward than
#+ for i in $(seq 10)
do
echo -n "$i "
done
echo
# 1 2 3 4 5 6 7 8 9 10
# Or just . . .
echo {a..z} # a b c d e f g h i j k l m n o p q r s t u v w x y z
echo {e..m} # e f g h i j k l m
echo {z..a} # z y x w v u t s r q p o n m l k j i h g f e d c b a
# Works backwards, too.
echo {25..30} # 25 26 27 28 29 30
echo {3..-2} # 3 2 1 0 -1 -2
echo {X..d} # X Y Z [ ] ^ _ ` a b c d
# Shows (some of) the ASCII characters between Z and a,
#+ but don't rely on this type of behavior because . . .
echo {]..a} # {]..a}
# Why?
# You can tack on prefixes and suffixes.
echo "Number #"{1..4}, "..."
# Number #1, Number #2, Number #3, Number #4, ...
# You can concatenate brace-expansion sets.
echo {1..3}{x..z}" +" "..."
# 1x + 1y + 1z + 2x + 2y + 2z + 3x + 3y + 3z + ...
# Generates an algebraic expression.
# This could be used to find permutations.
# You can nest brace-expansion sets.
echo {{a..c},{1..3}}
# a b c 1 2 3
# The "comma operator" splices together strings.
# Unfortunately, brace expansion does not lend itself to parameterization.
var1=1
var2=5
echo {$var1..$var2} # {1..5}
• The ${!array[@]} operator, which expands to all the indices of a given array.
#!/bin/bash
Array=(element-zero element-one element-two element-three)
echo ${Array[0]} # element-zero
# First element of array.
Chapter 34. Bash, versions 2, 3, and 4 527](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-533-320.jpg)
![Advanced Bash-Scripting Guide
echo ${!Array[@]} # 0 1 2 3
# All the indices of Array.
for i in ${!Array[@]}
do
echo ${Array[i]} # element-zero
# element-one
# element-two
# element-three
#
# All the elements in Array.
done
•
The =~ Regular Expression matching operator within a double brackets test expression. (Perl has a
similar operator.)
#!/bin/bash
variable="This is a fine mess."
echo "$variable"
# Regex matching with =~ operator within [[ double brackets ]].
if [[ "$variable" =~ T.........fin*es* ]]
# NOTE: As of version 3.2 of Bash, expression to match no longer quoted.
then
echo "match found"
# match found
fi
Or, more usefully:
#!/bin/bash
input=$1
if [[ "$input" =~ "[1-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9][0-9][0-9]" ]]
# ^ NOTE: Quoting not necessary, as of version 3.2 of Bash.
# NNN-NN-NNNN (where each N is a digit). Initial digit must not be 0.
then
echo "Social Security number."
# Process SSN.
else
echo "Not a Social Security number!"
# Or, ask for corrected input.
fi
For additional examples of using the =~ operator, see Example A-29, Example 18-14, Example A-35,
and Example A-24.
•
The new set -o pipefail option is useful for debugging pipes. If this option is set, then the exit
status of a pipe is the exit status of the last command in the pipe to fail (return a non-zero value),
rather than the actual final command in the pipe.
See Example 15-43.
Chapter 34. Bash, versions 2, 3, and 4 528](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-534-320.jpg)
![Advanced Bash-Scripting Guide
The update to version 3 of Bash breaks a few scripts that worked under earlier versions. Test critical
legacy scripts to make sure they still work!
As it happens, a couple of the scripts in the Advanced Bash Scripting Guide had to be fixed up (see
Example 9-4, for instance).
34.2.1. Bash, version 3.1
The version 3.1 update of Bash introduces a number of bugfixes and a few minor changes.
• The += operator is now permitted in in places where previously only the = assignment operator was
recognized.
a=1
echo $a # 1
a+=5 # Won't work under versions of Bash earlier than 3.1.
echo $a # 15
a+=Hello
echo $a # 15Hello
Here, += functions as a string concatenation operator. Note that its behavior in this particular context
is different than within a let construct.
a=1
echo $a # 1
let a+=5 # Integer arithmetic, rather than string concatenation.
echo $a # 6
let a+=Hello # Doesn't "add" anything to a.
echo $a # 6
34.2.2. Bash, version 3.2
This is pretty much a bugfix update.
• In global parameter substitutions, the pattern no longer anchors at the start of the string.
• The --wordexp option disables process substitution.
• The =~ Regular Expression match operator no longer requires quoting of the pattern within [[ ... ]].
In fact, quoting in this context is not advisable as it may cause regex evaluation to fail.
Chet Ramey states in the Bash FAQ that quoting explicitly disables regex evaluation.
See also the Ubuntu Bug List and Wikinerds on Bash syntax.
Setting shopt -s compat31 in a script causes reversion to the original behavior.
Chapter 34. Bash, versions 2, 3, and 4 529](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-535-320.jpg)
![Advanced Bash-Scripting Guide
34.3. Bash, version 4
Chet Ramey announced Version 4 of Bash on the 20th of February, 2009. This release has a number of
significant new features, as well as some important bugfixes.
Among the new goodies:
• Associative arrays.
An associative array can be thought of as a set of two linked arrays -- one holding the data, and the
other the keys that index the individual elements of the data array.
Example 34-5. A simple address database
#!/bin/bash4
# fetch_address.sh
declare -A address
# -A option declares associative array.
address[Charles]="414 W. 10th Ave., Baltimore, MD 21236"
address[John]="202 E. 3rd St., New York, NY 10009"
address[Wilma]="1854 Vermont Ave, Los Angeles, CA 90023"
echo "Charles's address is ${address[Charles]}."
# Charles's address is 414 W. 10th Ave., Baltimore, MD 21236.
echo "Wilma's address is ${address[Wilma]}."
# Wilma's address is 1854 Vermont Ave, Los Angeles, CA 90023.
echo "John's address is ${address[John]}."
# John's address is 202 E. 3rd St., New York, NY 10009.
Example 34-6. A somewhat more elaborate address database
#!/bin/bash4
# fetch_address-2.sh
# A more elaborate version of fetch_address.sh.
SUCCESS=0
E_DB=99 # Error code for missing entry.
declare -A address
# -A option declares associative array.
store_address ()
{
address[$1]="$2"
return $?
}
fetch_address ()
{
if [[ -z "${address[$1]}" ]]
Chapter 34. Bash, versions 2, 3, and 4 530](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-536-320.jpg)
![Advanced Bash-Scripting Guide
then
echo "$1's address is not in database."
return $E_DB
fi
echo "$1's address is ${address[$1]}."
return $?
}
store_address "Charles Jones" "414 W. 10th Ave., Baltimore, MD 21236"
store_address "John Smith" "202 E. 3rd St., New York, NY 10009"
store_address "Wilma Wilson" "1854 Vermont Ave, Los Angeles, CA 90023"
# Exercise:
# Rewrite the above store_address calls to read data from a file,
#+ then assign field 1 to name, field 2 to address in the array.
# Each line in the file would have a format corresponding to the above.
# Use a while-read loop to read from file, sed or awk to parse the fields.
fetch_address "Charles Jones"
# Charles Jones's address is 414 W. 10th Ave., Baltimore, MD 21236.
fetch_address "Wilma Wilson"
# Wilma Wilson's address is 1854 Vermont Ave, Los Angeles, CA 90023.
fetch_address "John Smith"
# John Smith's address is 202 E. 3rd St., New York, NY 10009.
fetch_address "Bozo Bozeman"
# Bozo Bozeman's address is not in database.
exit $? # In this case, exit code = 99, since that is function return.
• Enhancements to the case construct: the ;;& and ;& terminators.
Example 34-7. Testing characters
#!/bin/bash4
test_char ()
{
case "$1" in
[[:print:]] ) echo "$1 is a printable character.";;& # |
# The ;;& terminator continues to the next pattern test. |
[[:alnum:]] ) echo "$1 is an alpha/numeric character.";;& # v
[[:alpha:]] ) echo "$1 is an alphabetic character.";;& # v
[[:lower:]] ) echo "$1 is a lowercase alphabetic character.";;&
[[:digit:]] ) echo "$1 is an numeric character.";& # |
# The ;& terminator executes the next statement ... # |
%%%@@@@@ ) echo "********************************";; # v
# ^^^^^^^^ ... even with a dummy pattern.
esac
}
echo
test_char 3
# 3 is a printable character.
# 3 is an alpha/numeric character.
# 3 is an numeric character.
# ********************************
echo
test_char m
# m is a printable character.
Chapter 34. Bash, versions 2, 3, and 4 531](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-537-320.jpg)
![Advanced Bash-Scripting Guide
# m is an alpha/numeric character.
# m is an alphabetic character.
# m is a lowercase alphabetic character.
echo
test_char /
# / is a printable character.
echo
# The ;;& terminator can save complex if/then conditions.
# The ;& is somewhat less useful.
• The new coproc builtin enables two parallel processes to communicate and interact. As Chet Ramey
states in the Bash FAQ [119] , ver. 4.01:
There is a new 'coproc' reserved word that specifies a coprocess:
an asynchronous command run with two pipes connected to the creat
shell. Coprocs can be named. The input and output file descriptor
and the PID of the coprocess are available to the calling shell i
variables with coproc-specific names.
George Dimitriu explains,
"... coproc ... is a feature used in Bash process substitution,
which now is made publicly available."
This means it can be explicitly invoked in a script, rather than
just being a behind-the-scenes mechanism used by Bash.
See http://linux010.blogspot.com/2008/12/bash-process-substitutio
Coprocesses use file descriptors. File descriptors enable processes and pipes to communicate.
#!/bin/bash4
# A coprocess communicates with a while-read loop.
coproc { cat mx_data.txt; sleep 2; }
# ^^^^^^^
# Try running this without "sleep 2" and see what happens.
while read -u ${COPROC[0]} line # ${COPROC[0]} is the
do #+ file descriptor of the coprocess.
echo "$line" | sed -e 's/line/NOT-ORIGINAL-TEXT/'
done
kill $COPROC_PID # No longer need the coprocess,
#+ so kill its PID.
But, be careful!
#!/bin/bash4
echo; echo
a=aaa
b=bbb
c=ccc
coproc echo "one two three"
while read -u ${COPROC[0]} a b c; # Note that this loop
Chapter 34. Bash, versions 2, 3, and 4 532](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-538-320.jpg)
![Advanced Bash-Scripting Guide
do #+ runs in a subshell.
echo "Inside while-read loop: ";
echo "a = $a"; echo "b = $b"; echo "c = $c"
echo "coproc file descriptor: ${COPROC[0]}"
done
# a = one
# b = two
# c = three
# So far, so good, but ...
echo "-----------------"
echo "Outside while-read loop: "
echo "a = $a" # a =
echo "b = $b" # b =
echo "c = $c" # c =
echo "coproc file descriptor: ${COPROC[0]}"
echo
# The coproc is still running, but ...
#+ it still doesn't enable the parent process
#+ to "inherit" variables from the child process, the while-read loop.
# Compare this to the "badread.sh" script.
The coprocess is asynchronous, and this might cause a problem. It may terminate
before another process has finished communicating with it.
#!/bin/bash4
coproc cpname { for i in {0..10}; do echo "index = $i"; done; }
# ^^^^^^ This is a *named* coprocess.
read -u ${cpname[0]}
echo $REPLY # index = 0
echo ${COPROC[0]} #+ No output ... the coprocess timed out
# after the first loop iteration.
# However, George Dimitriu has a partial fix.
coproc cpname { for i in {0..10}; do echo "index = $i"; done; sleep 1;
echo hi > myo; cat - >> myo; }
# ^^^^^ This is a *named* coprocess.
echo "I am main"$'04' >&${cpname[1]}
myfd=${cpname[0]}
echo myfd=$myfd
### while read -u $myfd
### do
### echo $REPLY;
### done
echo $cpname_PID
# Run this with and without the commented-out while-loop, and it is
#+ apparent that each process, the executing shell and the coprocess,
#+ waits for the other to finish writing in its own write-enabled pipe.
• The new mapfile builtin makes it possible to load an array with the contents of a text file without
using a loop or command substitution.
Chapter 34. Bash, versions 2, 3, and 4 533](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-539-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash4
mapfile Arr1 < $0
# Same result as Arr1=( $(cat $0) )
echo "${Arr1[@]}" # Copies this entire script out to stdout.
echo "--"; echo
# But, not the same as read -a !!!
read -a Arr2 < $0
echo "${Arr2[@]}" # Reads only first line of script into the array.
exit
• The read builtin got a minor facelift. The -t timeout option now accepts (decimal) fractional values
[120] and the -i option permits preloading the edit buffer. [121] Unfortunately, these enhancements
are still a work in progress and not (yet) usable in scripts.
• Parameter substitution gets case-modification operators.
#!/bin/bash4
var=veryMixedUpVariable
echo ${var} # veryMixedUpVariable
echo ${var^} # VeryMixedUpVariable
# * First char --> uppercase.
echo ${var^^} # VERYMIXEDUPVARIABLE
# ** All chars --> uppercase.
echo ${var,} # veryMixedUpVariable
# * First char --> lowercase.
echo ${var,,} # verymixedupvariable
# ** All chars --> lowercase.
•
The declare builtin now accepts the -l lowercase and -c capitalize options.
#!/bin/bash4
declare -l var1 # Will change to lowercase
var1=MixedCaseVARIABLE
echo "$var1" # mixedcasevariable
# Same effect as echo $var1 | tr A-Z a-z
declare -c var2 # Changes only initial char to uppercase.
var2=originally_lowercase
echo "$var2" # Originally_lowercase
# NOT the same effect as echo $var2 | tr a-z A-Z
• Brace expansion has more options.
Increment/decrement, specified in the final term within braces.
#!/bin/bash4
echo {40..60..2}
# 40 42 44 46 48 50 52 54 56 58 60
# All the even numbers, between 40 and 60.
echo {60..40..2}
# 60 58 56 54 52 50 48 46 44 42 40
# All the even numbers, between 40 and 60, counting backwards.
# In effect, a decrement.
echo {60..40..-2}
Chapter 34. Bash, versions 2, 3, and 4 534](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-540-320.jpg)
![Advanced Bash-Scripting Guide
# The same output. The minus sign is not necessary.
# But, what about letters and symbols?
echo {X..d}
# X Y Z [ ] ^ _ ` a b c d
echo {X..d..2}
# X Z ^ ` b d
# It seems to work for upper/lowercase letters,
#+ but the increment is a bit inconsistent on symbols.
Zero-padding, specified in the first term within braces, prefixes each term in the output with the same
number of zeroes.
bash4$ echo {010..15}
010 011 012 013 014 015
bash4$ echo {000..10}
000 001 002 003 004 005 006 007 008 009 010
•
Substring extraction on positional parameters now starts with $0 as the zero-index. (This corrects an
inconsistency in the treatment of positional parameters.)
#!/bin/bash4
# show-params.bash4
# Invoke this scripts with at least one positional parameter.
E_BADPARAMS=99
if [ -z "$1" ]
then
echo "Usage $0 param1 ..."
exit $E_BADPARAMS
fi
echo ${@:0}
# bash3 show-params.bash4 one two three
# one two three
# bash4 show-params.bash4 one two three
# show-params.bash4 one two three
# $0 $1 $2 $3
• The new ** globbing operator matches filenames and directories recursively.
#!/bin/bash4
# filelist.bash4
shopt -s globstar # Must enable globstar, otherwise ** doesn't work.
# The globstar shell option is new to version 4 of Bash.
echo "Using *"; echo
for filename in *
do
echo "$filename"
done # Lists only files in current directory ($PWD).
Chapter 34. Bash, versions 2, 3, and 4 535](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-541-320.jpg)
![Advanced Bash-Scripting Guide
echo; echo "--------------"; echo
echo "Using **"
for filename in **
do
echo "$filename"
done # Lists complete file tree, recursively.
exit
Using *
allmyfiles
filelist.bash4
--------------
Using **
allmyfiles
allmyfiles/file.index.txt
allmyfiles/my_music
allmyfiles/my_music/me-singing-60s-folksongs.ogg
allmyfiles/my_music/me-singing-opera.ogg
allmyfiles/my_music/piano-lesson.1.ogg
allmyfiles/my_pictures
allmyfiles/my_pictures/at-beach-with-Jade.png
allmyfiles/my_pictures/picnic-with-Melissa.png
filelist.bash4
• The new $BASHPID internal variable.
•
There is a new builtin error-handling function named command_not_found_handle.
#!/bin/bash4
command_not_found_handle ()
{ # Accepts implicit parameters.
echo "The following command is not valid: ""$1"""
echo "With the following argument(s): ""$2"" ""$3""" # $4, $5 ...
} # $1, $2, etc. are not explicitly passed to the function.
bad_command arg1 arg2
# The following command is not valid: "bad_command"
# With the following argument(s): "arg1" "arg2"
Editorial comment
Associative arrays? Coprocesses? Whatever happened to the lean and mean Bash we have come to know
and love? Could it be suffering from (horrors!) "feature creep"? Or perhaps even Korn shell envy?
Note to Chet Ramey: Please add only essential features in future Bash releases -- perhaps for-each loops and
support for multi-dimensional arrays. [122] Most Bash users won't need, won't use, and likely won't greatly
appreciate complex "features" like built-in debuggers, Perl interfaces, and bolt-on rocket boosters.
Chapter 34. Bash, versions 2, 3, and 4 536](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-542-320.jpg)
![Chapter 35. Endnotes
35.1. Author's Note
doce ut discas
(Teach, that you yourself may learn.)
How did I come to write a Bash scripting book? It's a strange tale. It seems that a few years back I needed to
learn shell scripting -- and what better way to do that than to read a good book on the subject? I was looking
to buy a tutorial and reference covering all aspects of the subject. I was looking for a book that would take
difficult concepts, turn them inside out, and explain them in excruciating detail, with well-commented
examples. [123] In fact, I was looking for this very book, or something very much like it. Unfortunately, it
didn't exist, and if I wanted it, I'd have to write it. And so, here we are, folks.
That reminds me of the apocryphal story about a mad professor. Crazy as a loon, the fellow was. At the sight
of a book, any book -- at the library, at a bookstore, anywhere -- he would become totally obsessed with the
idea that he could have written it, should have written it -- and done a better job of it to boot. He would
thereupon rush home and proceed to do just that, write a book with the very same title. When he died some
years later, he allegedly had several thousand books to his credit, probably putting even Asimov to shame.
The books might not have been any good, who knows, but does that really matter? Here's a fellow who lived
his dream, even if he was obsessed by it, driven by it . . . and somehow I can't help admiring the old coot.
35.2. About the Author
Who is this guy anyhow?
The author claims no credentials or special qualifications, [124] other than a compulsion to write. [125] This
book is somewhat of a departure from his other major work, HOW-2 Meet Women: The Shy Man's Guide to
Relationships. He has also written the Software-Building HOWTO. Of late, he has been trying his (heavy)
hand at short fiction.
A Linux user since 1995 (Slackware 2.2, kernel 1.2.1), the author has emitted a few software truffles,
including the cruft one-time pad encryption utility, the mcalc mortgage calculator, the judge Scrabble®
adjudicator, the yawl word gaming list package, and the Quacky anagramming gaming package. He got off to
a rather shaky start in the computer game -- programming FORTRAN IV on a CDC 3800 -- and is not the
least bit nostalgic for those days.
Living in a secluded desert community with wife and orange tabby, he cherishes human frailty, especially his
own. [126]
35.3. Where to Go For Help
The author will sometimes, if not too busy (and in a good mood), answer general scripting questions. [127]
However, if you have a problem getting a specific script to work, you would be well advised to post to the
comp.os.unix.shell Usenet newsgroup.
If you need assistance with a schoolwork assignment, read the pertinent sections of this and other reference
works. Do your best to solve the problem using your own wits and resources. Kindly do not waste the author's
Chapter 35. Endnotes 537](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-543-320.jpg)
![Advanced Bash-Scripting Guide
time. You will get neither help nor sympathy. [128]
... sophisticated in mechanism but possibly agile
operating under noises being extremely
suppressed ...
--CI-300 printer manual
35.4. Tools Used to Produce This Book
35.4.1. Hardware
A used IBM Thinkpad, model 760XL laptop (P166, 104 meg RAM) running Red Hat 7.1/7.3. Sure, it's slow
and has a funky keyboard, but it beats the heck out of a No. 2 pencil and a Big Chief tablet.
Update: upgraded to a 770Z Thinkpad (P2-366, 192 meg RAM) running FC3. Anyone feel like donating a
later-model laptop to a starving writer <g>?
Update: upgraded to a A31 Thinkpad (P4-1.6, 512 meg RAM) running FC8. No longer starving, and no
longer soliciting donations <g>.
35.4.2. Software and Printware
i. Bram Moolenaar's powerful SGML-aware vim text editor.
ii. OpenJade, a DSSSL rendering engine for converting SGML documents into other formats.
iii. Norman Walsh's DSSSL stylesheets.
iv. DocBook, The Definitive Guide, by Norman Walsh and Leonard Muellner (O'Reilly, ISBN
1-56592-580-7). This is still the standard reference for anyone attempting to write a document in
Docbook SGML format.
35.5. Credits
Community participation made this project possible. The author gratefully acknowledges that writing this
book would have been unthinkable without help and feedback from all you people out there.
Philippe Martin translated the first version (0.1) of this document into DocBook/SGML. While not on the job
at a small French company as a software developer, he enjoys working on GNU/Linux documentation and
software, reading literature, playing music, and, for his peace of mind, making merry with friends. You may
run across him somewhere in France or in the Basque Country, or you can email him at feloy@free.fr.
Philippe Martin also pointed out that positional parameters past $9 are possible using {bracket} notation. (See
Example 4-5).
Stéphane Chazelas sent a long list of corrections, additions, and example scripts. More than a contributor, he
had, in effect, for a while taken on the role of co-editor for this document. Merci beaucoup!
Paulo Marcel Coelho Aragao offered many corrections, both major and minor, and contributed quite a number
of helpful suggestions.
Chapter 35. Endnotes 538](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-544-320.jpg)
![Advanced Bash-Scripting Guide
Still considered a standard reference, though somewhat dated, and a bit "wooden" stylistically speaking. [129]
In fact, this book was the ABS Guide author's first exposure to UNIX shell scripting, lo these many years ago.
For more information, see the Kochan-Wood website.
*
Neil Matthew and Richard Stones, Beginning Linux Programming, Wrox Press, 1996, 1874416680.
Surprisingly good in-depth coverage of various programming languages available for Linux, including a fairly
strong chapter on shell scripting.
*
Herbert Mayer, Advanced C Programming on the IBM PC, Windcrest Books, 1989, 0830693637.
Excellent coverage of algorithms and general programming practices. Highly recommended, but unfortunately
out of print.
*
David Medinets, Unix Shell Programming Tools, McGraw-Hill, 1999, 0070397333.
Pretty good treatment of shell scripting, with examples, and a short intro to Tcl and Perl.
*
Cameron Newham and Bill Rosenblatt, Learning the Bash Shell, 2nd edition, O'Reilly and Associates, 1998,
1-56592-347-2.
This is a valiant effort at a decent shell primer, but sadly deficient in its coverage of writing scripts and
lacking sufficient examples.
*
Anatole Olczak, Bourne Shell Quick Reference Guide, ASP, Inc., 1991, 093573922X.
A very handy pocket reference, despite lacking coverage of Bash-specific features.
*
Jerry Peek, Tim O'Reilly, and Mike Loukides, Unix Power Tools, 3rd edition, O'Reilly and Associates,
Random House, 2002, 0-596-00330-7.
Bibliography 542](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-548-320.jpg)
![Appendix A. Contributed Scripts
These scripts, while not fitting into the text of this document, do illustrate some interesting shell programming
techniques. They are useful, too. Have fun analyzing and running them.
Example A-1. mailformat: Formatting an e-mail message
#!/bin/bash
# mail-format.sh (ver. 1.1): Format e-mail messages.
# Gets rid of carets, tabs, and also folds excessively long lines.
# =================================================================
# Standard Check for Script Argument(s)
ARGS=1
E_BADARGS=65
E_NOFILE=66
if [ $# -ne $ARGS ] # Correct number of arguments passed to script?
then
echo "Usage: `basename $0` filename"
exit $E_BADARGS
fi
if [ -f "$1" ] # Check if file exists.
then
file_name=$1
else
echo "File "$1" does not exist."
exit $E_NOFILE
fi
# =================================================================
MAXWIDTH=70 # Width to fold excessively long lines to.
# ---------------------------------
# A variable can hold a sed script.
sedscript='s/^>//
s/^ *>//
s/^ *//
s/ *//'
# ---------------------------------
# Delete carets and tabs at beginning of lines,
#+ then fold lines to $MAXWIDTH characters.
sed "$sedscript" $1 | fold -s --width=$MAXWIDTH
# -s option to "fold"
#+ breaks lines at whitespace, if possible.
# This script was inspired by an article in a well-known trade journal
#+ extolling a 164K MS Windows utility with similar functionality.
#
# An nice set of text processing utilities and an efficient
#+ scripting language provide an alternative to bloated executables.
exit
Appendix A. Contributed Scripts 549](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-555-320.jpg)
![Advanced Bash-Scripting Guide
Example A-2. rn: A simple-minded file renaming utility
This script is a modification of Example 15-22.
#! /bin/bash
# rn.sh
# Very simpleminded filename "rename" utility (based on "lowercase.sh").
#
# The "ren" utility, by Vladimir Lanin (lanin@csd2.nyu.edu),
#+ does a much better job of this.
ARGS=2
E_BADARGS=85
ONE=1 # For getting singular/plural right (see below).
if [ $# -ne "$ARGS" ]
then
echo "Usage: `basename $0` old-pattern new-pattern"
# As in "rn gif jpg", which renames all gif files in working directory to jpg.
exit $E_BADARGS
fi
number=0 # Keeps track of how many files actually renamed.
for filename in *$1* #Traverse all matching files in directory.
do
if [ -f "$filename" ] # If finds match...
then
fname=`basename $filename` # Strip off path.
n=`echo $fname | sed -e "s/$1/$2/"` # Substitute new for old in filename.
mv $fname $n # Rename.
let "number += 1"
fi
done
if [ "$number" -eq "$ONE" ] # For correct grammar.
then
echo "$number file renamed."
else
echo "$number files renamed."
fi
exit $?
# Exercises:
# ---------
# What types of files will this not work on?
# How can this be fixed?
Example A-3. blank-rename: Renames filenames containing blanks
This is an even simpler-minded version of previous script.
#! /bin/bash
# blank-rename.sh
#
Appendix A. Contributed Scripts 550](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-556-320.jpg)
![Advanced Bash-Scripting Guide
# Substitutes underscores for blanks in all the filenames in a directory.
ONE=1 # For getting singular/plural right (see below).
number=0 # Keeps track of how many files actually renamed.
FOUND=0 # Successful return value.
for filename in * #Traverse all files in directory.
do
echo "$filename" | grep -q " " # Check whether filename
if [ $? -eq $FOUND ] #+ contains space(s).
then
fname=$filename # Yes, this filename needs work.
n=`echo $fname | sed -e "s/ /_/g"` # Substitute underscore for blank.
mv "$fname" "$n" # Do the actual renaming.
let "number += 1"
fi
done
if [ "$number" -eq "$ONE" ] # For correct grammar.
then
echo "$number file renamed."
else
echo "$number files renamed."
fi
exit 0
Example A-4. encryptedpw: Uploading to an ftp site, using a locally encrypted password
#!/bin/bash
# Example "ex72.sh" modified to use encrypted password.
# Note that this is still rather insecure,
#+ since the decrypted password is sent in the clear.
# Use something like "ssh" if this is a concern.
E_BADARGS=85
if [ -z "$1" ]
then
echo "Usage: `basename $0` filename"
exit $E_BADARGS
fi
Username=bozo # Change to suit.
pword=/home/bozo/secret/password_encrypted.file
# File containing encrypted password.
Filename=`basename $1` # Strips pathname out of file name.
Server="XXX"
Directory="YYY" # Change above to actual server name & directory.
Password=`cruft <$pword` # Decrypt password.
# Uses the author's own "cruft" file encryption package,
#+ based on the classic "onetime pad" algorithm,
#+ and obtainable from:
#+ Primary-site: ftp://ibiblio.org/pub/Linux/utils/file
#+ cruft-0.2.tar.gz [16k]
Appendix A. Contributed Scripts 551](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-557-320.jpg)
![Advanced Bash-Scripting Guide
ftp -n $Server <<End-Of-Session
user $Username $Password
binary
bell
cd $Directory
put $Filename
bye
End-Of-Session
# -n option to "ftp" disables auto-logon.
# Note that "bell" rings 'bell' after each file transfer.
exit 0
Example A-5. copy-cd: Copying a data CD
#!/bin/bash
# copy-cd.sh: copying a data CD
CDROM=/dev/cdrom # CD ROM device
OF=/home/bozo/projects/cdimage.iso # output file
# /xxxx/xxxxxxxx/ Change to suit your system.
BLOCKSIZE=2048
# SPEED=10 # If unspecified, uses max spd.
# DEVICE=/dev/cdrom older version.
DEVICE="1,0,0"
echo; echo "Insert source CD, but do *not* mount it."
echo "Press ENTER when ready. "
read ready # Wait for input, $ready not used.
echo; echo "Copying the source CD to $OF."
echo "This may take a while. Please be patient."
dd if=$CDROM of=$OF bs=$BLOCKSIZE # Raw device copy.
echo; echo "Remove data CD."
echo "Insert blank CDR."
echo "Press ENTER when ready. "
read ready # Wait for input, $ready not used.
echo "Copying $OF to CDR."
# cdrecord -v -isosize speed=$SPEED dev=$DEVICE $OF # Old version.
wodim -v -isosize dev=$DEVICE $OF
# Uses Joerg Schilling's "cdrecord" package (see its docs).
# http://www.fokus.gmd.de/nthp/employees/schilling/cdrecord.html
# Newer Linux distros may use "wodim" rather than "cdrecord" ...
echo; echo "Done copying $OF to CDR on device $CDROM."
echo "Do you want to erase the image file (y/n)? " # Probably a huge file.
read answer
case "$answer" in
[yY]) rm -f $OF
echo "$OF erased."
;;
Appendix A. Contributed Scripts 552](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-558-320.jpg)
![Advanced Bash-Scripting Guide
*) echo "$OF not erased.";;
esac
echo
# Exercise:
# Change the above "case" statement to also accept "yes" and "Yes" as input.
exit 0
Example A-6. Collatz series
#!/bin/bash
# collatz.sh
# The notorious "hailstone" or Collatz series.
# -------------------------------------------
# 1) Get the integer "seed" from the command-line.
# 2) NUMBER <-- seed
# 3) Print NUMBER.
# 4) If NUMBER is even, divide by 2, or
# 5)+ if odd, multiply by 3 and add 1.
# 6) NUMBER <-- result
# 7) Loop back to step 3 (for specified number of iterations).
#
# The theory is that every sequence,
#+ no matter how large the initial value,
#+ eventually settles down to repeating "4,2,1..." cycles,
#+ even after fluctuating through a wide range of values.
#
# This is an instance of an "iterate,"
#+ an operation that feeds its output back into its input.
# Sometimes the result is a "chaotic" series.
MAX_ITERATIONS=200
# For large seed numbers (>32000), try increasing MAX_ITERATIONS.
h=${1:-$$} # Seed.
# Use $PID as seed,
#+ if not specified as command-line arg.
echo
echo "C($h) --- $MAX_ITERATIONS Iterations"
echo
for ((i=1; i<=MAX_ITERATIONS; i++))
do
# echo -n "$h "
# ^^^
# tab
# printf does it better ...
COLWIDTH=%7d
printf $COLWIDTH $h
let "remainder = h % 2"
if [ "$remainder" -eq 0 ] # Even?
then
let "h /= 2" # Divide by 2.
else
Appendix A. Contributed Scripts 553](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-559-320.jpg)
![Advanced Bash-Scripting Guide
let "h = h*3 + 1" # Multiply by 3 and add 1.
fi
COLUMNS=10 # Output 10 values per line.
let "line_break = i % $COLUMNS"
if [ "$line_break" -eq 0 ]
then
echo
fi
done
echo
# For more information on this strange mathematical function,
#+ see _Computers, Pattern, Chaos, and Beauty_, by Pickover, p. 185 ff.,
#+ as listed in the bibliography.
exit 0
Example A-7. days-between: Days between two dates
#!/bin/bash
# days-between.sh: Number of days between two dates.
# Usage: ./days-between.sh [M]M/[D]D/YYYY [M]M/[D]D/YYYY
#
# Note: Script modified to account for changes in Bash, v. 2.05b +,
#+ that closed the loophole permitting large negative
#+ integer return values.
ARGS=2 # Two command-line parameters expected.
E_PARAM_ERR=85 # Param error.
REFYR=1600 # Reference year.
CENTURY=100
DIY=365
ADJ_DIY=367 # Adjusted for leap year + fraction.
MIY=12
DIM=31
LEAPCYCLE=4
MAXRETVAL=255 # Largest permissible
#+ positive return value from a function.
diff= # Declare global variable for date difference.
value= # Declare global variable for absolute value.
day= # Declare globals for day, month, year.
month=
year=
Param_Error () # Command-line parameters wrong.
{
echo "Usage: `basename $0` [M]M/[D]D/YYYY [M]M/[D]D/YYYY"
echo " (date must be after 1/3/1600)"
exit $E_PARAM_ERR
}
Appendix A. Contributed Scripts 554](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-560-320.jpg)
![Advanced Bash-Scripting Guide
Parse_Date () # Parse date from command-line params.
{
month=${1%%/**}
dm=${1%/**} # Day and month.
day=${dm#*/}
let "year = `basename $1`" # Not a filename, but works just the same.
}
check_date () # Checks for invalid date(s) passed.
{
[ "$day" -gt "$DIM" ] || [ "$month" -gt "$MIY" ] ||
[ "$year" -lt "$REFYR" ] && Param_Error
# Exit script on bad value(s).
# Uses or-list / and-list.
#
# Exercise: Implement more rigorous date checking.
}
strip_leading_zero () # Better to strip possible leading zero(s)
{ #+ from day and/or month
return ${1#0} #+ since otherwise Bash will interpret them
} #+ as octal values (POSIX.2, sect 2.9.2.1).
day_index () # Gauss' Formula:
{ # Days from March 1, 1600 to date passed as param.
# ^^^^^^^^^^^^^
day=$1
month=$2
year=$3
let "month = $month - 2"
if [ "$month" -le 0 ]
then
let "month += 12"
let "year -= 1"
fi
let "year -= $REFYR"
let "indexyr = $year / $CENTURY"
let "Days = $DIY*$year + $year/$LEAPCYCLE - $indexyr
+ $indexyr/$LEAPCYCLE + $ADJ_DIY*$month/$MIY + $day - $DIM"
# For an in-depth explanation of this algorithm, see
#+ http://weblogs.asp.net/pgreborio/archive/2005/01/06/347968.aspx
echo $Days
}
calculate_difference () # Difference between two day indices.
{
let "diff = $1 - $2" # Global variable.
}
abs () # Absolute value
Appendix A. Contributed Scripts 555](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-561-320.jpg)
![Advanced Bash-Scripting Guide
{ # Uses global "value" variable.
if [ "$1" -lt 0 ] # If negative
then #+ then
let "value = 0 - $1" #+ change sign,
else #+ else
let "value = $1" #+ leave it alone.
fi
}
if [ $# -ne "$ARGS" ] # Require two command-line params.
then
Param_Error
fi
Parse_Date $1
check_date $day $month $year # See if valid date.
strip_leading_zero $day # Remove any leading zeroes
day=$? #+ on day and/or month.
strip_leading_zero $month
month=$?
let "date1 = `day_index $day $month $year`"
Parse_Date $2
check_date $day $month $year
strip_leading_zero $day
day=$?
strip_leading_zero $month
month=$?
date2=$(day_index $day $month $year) # Command substitution.
calculate_difference $date1 $date2
abs $diff # Make sure it's positive.
diff=$value
echo $diff
exit 0
# Exercise:
# --------
# If given only one command-line parameter, have the script
#+ use today's date as the second.
# Compare this script with
#+ the implementation of Gauss' Formula in a C program at
#+ http://buschencrew.hypermart.net/software/datedif
Example A-8. Making a dictionary
#!/bin/bash
# makedict.sh [make dictionary]
Appendix A. Contributed Scripts 556](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-562-320.jpg)
![Advanced Bash-Scripting Guide
# Modification of /usr/sbin/mkdict (/usr/sbin/cracklib-forman) script.
# Original script copyright 1993, by Alec Muffett.
#
# This modified script included in this document in a manner
#+ consistent with the "LICENSE" document of the "Crack" package
#+ that the original script is a part of.
# This script processes text files to produce a sorted list
#+ of words found in the files.
# This may be useful for compiling dictionaries
#+ and for other lexicographic purposes.
E_BADARGS=65
if [ ! -r "$1" ] # Need at least one
then #+ valid file argument.
echo "Usage: $0 files-to-process"
exit $E_BADARGS
fi
# SORT="sort" # No longer necessary to define options
#+ to sort. Changed from original script.
cat $* | # Contents of specified files to stdout.
tr A-Z a-z | # Convert to lowercase.
tr ' ' '012' | # New: change spaces to newlines.
# tr -cd '012[a-z][0-9]' | # Get rid of everything non-alphanumeric
#+ (in original script).
tr -c '012a-z' '012' | # Rather than deleting non-alpha chars,
#+ change them to newlines.
sort | # $SORT options unnecessary now.
uniq | # Remove duplicates.
grep -v '^#' | # Delete lines beginning with a hashmark.
grep -v '^$' # Delete blank lines.
exit 0
Example A-9. Soundex conversion
#!/bin/bash
# soundex.sh: Calculate "soundex" code for names
# =======================================================
# Soundex script
# by
# Mendel Cooper
# thegrendel.abs@gmail.com
# reldate: 23 January, 2002
#
# Placed in the Public Domain.
#
# A slightly different version of this script appeared in
#+ Ed Schaefer's July, 2002 "Shell Corner" column
#+ in "Unix Review" on-line,
#+ http://www.unixreview.com/documents/uni1026336632258/
# =======================================================
Appendix A. Contributed Scripts 557](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-563-320.jpg)
![Advanced Bash-Scripting Guide
ARGCOUNT=1 # Need name as argument.
E_WRONGARGS=90
if [ $# -ne "$ARGCOUNT" ]
then
echo "Usage: `basename $0` name"
exit $E_WRONGARGS
fi
assign_value () # Assigns numerical value
{ #+ to letters of name.
val1=bfpv # 'b,f,p,v' = 1
val2=cgjkqsxz # 'c,g,j,k,q,s,x,z' = 2
val3=dt # etc.
val4=l
val5=mn
val6=r
# Exceptionally clever use of 'tr' follows.
# Try to figure out what is going on here.
value=$( echo "$1"
| tr -d wh
| tr $val1 1 | tr $val2 2 | tr $val3 3
| tr $val4 4 | tr $val5 5 | tr $val6 6
| tr -s 123456
| tr -d aeiouy )
# Assign letter values.
# Remove duplicate numbers, except when separated by vowels.
# Ignore vowels, except as separators, so delete them last.
# Ignore 'w' and 'h', even as separators, so delete them first.
#
# The above command substitution lays more pipe than a plumber <g>.
}
input_name="$1"
echo
echo "Name = $input_name"
# Change all characters of name input to lowercase.
# ------------------------------------------------
name=$( echo $input_name | tr A-Z a-z )
# ------------------------------------------------
# Just in case argument to script is mixed case.
# Prefix of soundex code: first letter of name.
# --------------------------------------------
char_pos=0 # Initialize character position.
prefix0=${name:$char_pos:1}
prefix=`echo $prefix0 | tr a-z A-Z`
# Uppercase 1st letter of soundex.
Appendix A. Contributed Scripts 558](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-564-320.jpg)
![Advanced Bash-Scripting Guide
let "char_pos += 1" # Bump character position to 2nd letter of name.
name1=${name:$char_pos}
# ++++++++++++++++++++++++++ Exception Patch ++++++++++++++++++++++++++++++
# Now, we run both the input name and the name shifted one char
#+ to the right through the value-assigning function.
# If we get the same value out, that means that the first two characters
#+ of the name have the same value assigned, and that one should cancel.
# However, we also need to test whether the first letter of the name
#+ is a vowel or 'w' or 'h', because otherwise this would bollix things up.
char1=`echo $prefix | tr A-Z a-z` # First letter of name, lowercased.
assign_value $name
s1=$value
assign_value $name1
s2=$value
assign_value $char1
s3=$value
s3=9$s3 # If first letter of name is a vowel
#+ or 'w' or 'h',
#+ then its "value" will be null (unset).
#+ Therefore, set it to 9, an otherwise
#+ unused value, which can be tested for.
if [[ "$s1" -ne "$s2" || "$s3" -eq 9 ]]
then
suffix=$s2
else
suffix=${s2:$char_pos}
fi
# ++++++++++++++++++++++ end Exception Patch ++++++++++++++++++++++++++++++
padding=000 # Use at most 3 zeroes to pad.
soun=$prefix$suffix$padding # Pad with zeroes.
MAXLEN=4 # Truncate to maximum of 4 chars.
soundex=${soun:0:$MAXLEN}
echo "Soundex = $soundex"
echo
# The soundex code is a method of indexing and classifying names
#+ by grouping together the ones that sound alike.
# The soundex code for a given name is the first letter of the name,
#+ followed by a calculated three-number code.
# Similar sounding names should have almost the same soundex codes.
# Examples:
# Smith and Smythe both have a "S-530" soundex.
# Harrison = H-625
# Hargison = H-622
# Harriman = H-655
# This works out fairly well in practice, but there are numerous anomalies.
#
Appendix A. Contributed Scripts 559](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-565-320.jpg)
![Advanced Bash-Scripting Guide
#
# The U.S. Census and certain other governmental agencies use soundex,
# as do genealogical researchers.
#
# For more information,
#+ see the "National Archives and Records Administration home page",
#+ http://www.nara.gov/genealogy/soundex/soundex.html
# Exercise:
# --------
# Simplify the "Exception Patch" section of this script.
exit 0
Example A-10. Game of Life
#!/bin/bash
# life.sh: "Life in the Slow Lane"
# Version 0.2: Patched by Daniel Albers
#+ to allow non-square grids as input.
# Version 0.2.1: Added 2-second delay between generations.
# ##################################################################### #
# This is the Bash script version of John Conway's "Game of Life". #
# "Life" is a simple implementation of cellular automata. #
# --------------------------------------------------------------------- #
# On a rectangular grid, let each "cell" be either "living" or "dead." #
# Designate a living cell with a dot, and a dead one with a blank space.#
# Begin with an arbitrarily drawn dot-and-blank grid, #
#+ and let this be the starting generation, "generation 0." #
# Determine each successive generation by the following rules: #
# 1) Each cell has 8 neighbors, the adjoining cells #
#+ left, right, top, bottom, and the 4 diagonals. #
# #
# 123 #
# 4*5 The * is the cell under consideration. #
# 678 #
# #
# 2) A living cell with either 2 or 3 living neighbors remains alive. #
SURVIVE=2 #
# 3) A dead cell with 3 living neighbors comes alive (a "birth"). #
BIRTH=3 #
# 4) All other cases result in a dead cell for the next generation. #
# ##################################################################### #
startfile=gen0 # Read the starting generation from the file "gen0" ...
# Default, if no other file specified when invoking script.
#
if [ -n "$1" ] # Specify another "generation 0" file.
then
startfile="$1"
fi
############################################
# Abort script if "startfile" not specified
#+ and
Appendix A. Contributed Scripts 560](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-566-320.jpg)
![Advanced Bash-Scripting Guide
#+ default file "gen0" not present.
E_NOSTARTFILE=86
if [ ! -e "$startfile" ]
then
echo "Startfile ""$startfile"" missing!"
exit $E_NOSTARTFILE
fi
############################################
ALIVE1=.
DEAD1=_
# Represent living and dead cells in the start-up file.
# ---------------------------------------------------------- #
# This script uses a 10 x 10 grid (may be increased,
#+ but a large grid will slow execution).
ROWS=10
COLS=10
# Change above two variables to match grid size, as desired.
# ---------------------------------------------------------- #
GENERATIONS=10 # How many generations to cycle through.
# Adjust this upwards
#+ if you have time on your hands.
NONE_ALIVE=85 # Exit status on premature bailout,
#+ if no cells left alive.
DELAY=2 # Pause between generations, etc.
TRUE=0
FALSE=1
ALIVE=0
DEAD=1
avar= # Global; holds current generation.
generation=0 # Initialize generation count.
# =================================================================
let "cells = $ROWS * $COLS" # How many cells.
# Arrays containing "cells."
declare -a initial
declare -a current
display ()
{
alive=0 # How many cells alive at any given time.
# Initially zero.
declare -a arr
arr=( `echo "$1"` ) # Convert passed arg to array.
element_count=${#arr[*]}
local i
local rowcheck
for ((i=0; i<$element_count; i++))
Appendix A. Contributed Scripts 561](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-567-320.jpg)
![Advanced Bash-Scripting Guide
do
# Insert newline at end of each row.
let "rowcheck = $i % COLS"
if [ "$rowcheck" -eq 0 ]
then
echo # Newline.
echo -n " " # Indent.
fi
cell=${arr[i]}
if [ "$cell" = . ]
then
let "alive += 1"
fi
echo -n "$cell" | sed -e 's/_/ /g'
# Print out array, changing underscores to spaces.
done
return
}
IsValid () # Test whether cell coordinate valid.
{
if [ -z "$1" -o -z "$2" ] # Mandatory arguments missing?
then
return $FALSE
fi
local row
local lower_limit=0 # Disallow negative coordinate.
local upper_limit
local left
local right
let "upper_limit = $ROWS * $COLS - 1" # Total number of cells.
if [ "$1" -lt "$lower_limit" -o "$1" -gt "$upper_limit" ]
then
return $FALSE # Out of array bounds.
fi
row=$2
let "left = $row * $COLS" # Left limit.
let "right = $left + $COLS - 1" # Right limit.
if [ "$1" -lt "$left" -o "$1" -gt "$right" ]
then
return $FALSE # Beyond row boundary.
fi
return $TRUE # Valid coordinate.
}
IsAlive () # Test whether cell is alive.
Appendix A. Contributed Scripts 562](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-568-320.jpg)
![Advanced Bash-Scripting Guide
# Takes array, cell number, and
{ #+ state of cell as arguments.
GetCount "$1" $2 # Get alive cell count in neighborhood.
local nhbd=$?
if [ "$nhbd" -eq "$BIRTH" ] # Alive in any case.
then
return $ALIVE
fi
if [ "$3" = "." -a "$nhbd" -eq "$SURVIVE" ]
then # Alive only if previously alive.
return $ALIVE
fi
return $DEAD # Dead, by default.
}
GetCount () # Count live cells in passed cell's neighborhood.
# Two arguments needed:
# $1) variable holding array
# $2) cell number
{
local cell_number=$2
local array
local top
local center
local bottom
local r
local row
local i
local t_top
local t_cen
local t_bot
local count=0
local ROW_NHBD=3
array=( `echo "$1"` )
let "top = $cell_number - $COLS - 1" # Set up cell neighborhood.
let "center = $cell_number - 1"
let "bottom = $cell_number + $COLS - 1"
let "r = $cell_number / $COLS"
for ((i=0; i<$ROW_NHBD; i++)) # Traverse from left to right.
do
let "t_top = $top + $i"
let "t_cen = $center + $i"
let "t_bot = $bottom + $i"
let "row = $r" # Count center row.
IsValid $t_cen $row # Valid cell position?
if [ $? -eq "$TRUE" ]
then
if [ ${array[$t_cen]} = "$ALIVE1" ] # Is it alive?
then # If yes, then ...
let "count += 1" # Increment count.
fi
fi
Appendix A. Contributed Scripts 563](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-569-320.jpg)
![Advanced Bash-Scripting Guide
let "row = $r - 1" # Count top row.
IsValid $t_top $row
if [ $? -eq "$TRUE" ]
then
if [ ${array[$t_top]} = "$ALIVE1" ] # Redundancy here.
then # Can be optimized?
let "count += 1"
fi
fi
let "row = $r + 1" # Count bottom row.
IsValid $t_bot $row
if [ $? -eq "$TRUE" ]
then
if [ ${array[$t_bot]} = "$ALIVE1" ]
then
let "count += 1"
fi
fi
done
if [ ${array[$cell_number]} = "$ALIVE1" ]
then
let "count -= 1" # Make sure value of tested cell itself
fi #+ is not counted.
return $count
}
next_gen () # Update generation array.
{
local array
local i=0
array=( `echo "$1"` ) # Convert passed arg to array.
while [ "$i" -lt "$cells" ]
do
IsAlive "$1" $i ${array[$i]} # Is cell alive?
if [ $? -eq "$ALIVE" ]
then # If alive, then
array[$i]=. #+ represent the cell as a period.
else
array[$i]="_" # Otherwise underscore
fi #+ (will later be converted to space).
let "i += 1"
done
# let "generation += 1" # Increment generation count.
# Why was the above line commented out?
# Set variable to pass as parameter to "display" function.
avar=`echo ${array[@]}` # Convert array back to string variable.
display "$avar" # Display it.
Appendix A. Contributed Scripts 564](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-570-320.jpg)
![Advanced Bash-Scripting Guide
echo; echo
echo "Generation $generation - $alive alive"
if [ "$alive" -eq 0 ]
then
echo
echo "Premature exit: no more cells alive!"
exit $NONE_ALIVE # No point in continuing
fi #+ if no live cells.
}
# =========================================================
# main ()
# Load initial array with contents of startup file.
initial=( `cat "$startfile" | sed -e '/#/d' | tr -d 'n' |
# Delete lines containing '#' comment character.
sed -e 's/./. /g' -e 's/_/_ /g'` )
# Remove linefeeds and insert space between elements.
clear # Clear screen.
echo # Title
setterm -reverse on
echo "======================="
setterm -reverse off
echo " $GENERATIONS generations"
echo " of"
echo ""Life in the Slow Lane""
setterm -reverse on
echo "======================="
setterm -reverse off
sleep $DELAY # Display "splash screen" for 2 seconds.
# -------- Display first generation. --------
Gen0=`echo ${initial[@]}`
display "$Gen0" # Display only.
echo; echo
echo "Generation $generation - $alive alive"
sleep $DELAY
# -------------------------------------------
let "generation += 1" # Bump generation count.
echo
# ------- Display second generation. -------
Cur=`echo ${initial[@]}`
next_gen "$Cur" # Update & display.
sleep $DELAY
# ------------------------------------------
let "generation += 1" # Increment generation count.
# ------ Main loop for displaying subsequent generations ------
while [ "$generation" -le "$GENERATIONS" ]
do
Appendix A. Contributed Scripts 565](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-571-320.jpg)
![Advanced Bash-Scripting Guide
Cur="$avar"
next_gen "$Cur"
let "generation += 1"
sleep $DELAY
done
# ==============================================================
echo
exit 0 # CEOF:EOF
# The grid in this script has a "boundary problem."
# The the top, bottom, and sides border on a void of dead cells.
# Exercise: Change the script to have the grid wrap around,
# + so that the left and right sides will "touch,"
# + as will the top and bottom.
#
# Exercise: Create a new "gen0" file to seed this script.
# Use a 12 x 16 grid, instead of the original 10 x 10 one.
# Make the necessary changes to the script,
#+ so it will run with the altered file.
#
# Exercise: Modify this script so that it can determine the grid size
#+ from the "gen0" file, and set any variables necessary
#+ for the script to run.
# This would make unnecessary any changes to variables
#+ in the script for an altered grid size.
#
# Exercise: Optimize this script.
# It has some redundant code.
Example A-11. Data file for Game of Life
# gen0
#
# This is an example "generation 0" start-up file for "life.sh".
# --------------------------------------------------------------
# The "gen0" file is a 10 x 10 grid using a period (.) for live cells,
#+ and an underscore (_) for dead ones. We cannot simply use spaces
#+ for dead cells in this file because of a peculiarity in Bash arrays.
# [Exercise for the reader: explain this.]
#
# Lines beginning with a '#' are comments, and the script ignores them.
__.__..___
___._.____
____.___..
_._______.
____._____
..__...___
____._____
___...____
__.._..___
_..___..__
+++
The following script is by Mark Moraes of the University of Toronto. See the file Moraes-COPYRIGHT for
permissions and restrictions. This file is included in the combined HTML/source tarball of the ABS Guide.
Appendix A. Contributed Scripts 566](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-572-320.jpg)
![Advanced Bash-Scripting Guide
Example A-12. behead: Removing mail and news message headers
#! /bin/sh
# Strips off the header from a mail/News message i.e. till the first
# empty line.
# Author: Mark Moraes, University of Toronto
# ==> These comments added by author of this document.
if [ $# -eq 0 ]; then
# ==> If no command-line args present, then works on file redirected to stdin.
sed -e '1,/^$/d' -e '/^[ ]*$/d'
# --> Delete empty lines and all lines until
# --> first one beginning with white space.
else
# ==> If command-line args present, then work on files named.
for i do
sed -e '1,/^$/d' -e '/^[ ]*$/d' $i
# --> Ditto, as above.
done
fi
exit
# ==> Exercise: Add error checking and other options.
# ==>
# ==> Note that the small sed script repeats, except for the arg passed.
# ==> Does it make sense to embed it in a function? Why or why not?
/*
* Copyright University of Toronto 1988, 1989.
* Written by Mark Moraes
*
* Permission is granted to anyone to use this software for any purpose on
* any computer system, and to alter it and redistribute it freely, subject
* to the following restrictions:
*
* 1. The author and the University of Toronto are not responsible
* for the consequences of use of this software, no matter how awful,
* even if they arise from flaws in it.
*
* 2. The origin of this software must not be misrepresented, either by
* explicit claim or by omission. Since few users ever read sources,
* credits must appear in the documentation.
*
* 3. Altered versions must be plainly marked as such, and must not be
* misrepresented as being the original software. Since few users
* ever read sources, credits must appear in the documentation.
*
* 4. This notice may not be removed or altered.
*/
+
Antek Sawicki contributed the following script, which makes very clever use of the parameter substitution
operators discussed in Section 9.3.
Example A-13. password: Generating random 8-character passwords
Appendix A. Contributed Scripts 567](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-573-320.jpg)
![Advanced Bash-Scripting Guide
#!/bin/bash
# May need to be invoked with #!/bin/bash2 on older machines.
#
# Random password generator for Bash 2.x +
#+ by Antek Sawicki <tenox@tenox.tc>,
#+ who generously gave usage permission to the ABS Guide author.
#
# ==> Comments added by document author ==>
MATRIX="0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz"
# ==> Password will consist of alphanumeric characters.
LENGTH="8"
# ==> May change 'LENGTH' for longer password.
while [ "${n:=1}" -le "$LENGTH" ]
# ==> Recall that := is "default substitution" operator.
# ==> So, if 'n' has not been initialized, set it to 1.
do
PASS="$PASS${MATRIX:$(($RANDOM%${#MATRIX})):1}"
# ==> Very clever, but tricky.
# ==> Starting from the innermost nesting...
# ==> ${#MATRIX} returns length of array MATRIX.
# ==> $RANDOM%${#MATRIX} returns random number between 1
# ==> and [length of MATRIX] - 1.
# ==> ${MATRIX:$(($RANDOM%${#MATRIX})):1}
# ==> returns expansion of MATRIX at random position, by length 1.
# ==> See {var:pos:len} parameter substitution in Chapter 9.
# ==> and the associated examples.
# ==> PASS=... simply pastes this result onto previous PASS (concatenation).
# ==> To visualize this more clearly, uncomment the following line
# echo "$PASS"
# ==> to see PASS being built up,
# ==> one character at a time, each iteration of the loop.
let n+=1
# ==> Increment 'n' for next pass.
done
echo "$PASS" # ==> Or, redirect to a file, as desired.
exit 0
+
James R. Van Zandt contributed this script which uses named pipes and, in his words, "really exercises
quoting and escaping."
Example A-14. fifo: Making daily backups, using named pipes
#!/bin/bash
# ==> Script by James R. Van Zandt, and used here with his permission.
# ==> Comments added by author of this document.
Appendix A. Contributed Scripts 568](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-574-320.jpg)
![Advanced Bash-Scripting Guide
for i; do # "i" set to "@", previous values of $n.
# echo "-n=$n i=$i-"
(( i * i > n )) && break # Optimization.
(( n % i )) && continue # Sift out non-primes using modulo operator.
Primes $n $@ # Recursion inside loop.
return
done
Primes $n $@ $n # Recursion outside loop.
# Successively accumulate
#+ positional parameters.
# "$@" is the accumulating list of primes.
}
Primes 1
exit $?
# Pipe output of the script to 'fmt' for prettier printing.
# Uncomment lines 16 and 24 to help figure out what is going on.
# Compare the speed of this algorithm for generating primes
#+ with the Sieve of Eratosthenes (ex68.sh).
# Exercise: Rewrite this script without recursion.
+
Rick Boivie's revision of Jordi Sanfeliu's tree script.
Example A-16. tree: Displaying a directory tree
#!/bin/bash
# tree.sh
# Written by Rick Boivie.
# Used with permission.
# This is a revised and simplified version of a script
#+ by Jordi Sanfeliu (the original author), and patched by Ian Kjos.
# This script replaces the earlier version used in
#+ previous releases of the Advanced Bash Scripting Guide.
# Copyright (c) 2002, by Jordi Sanfeliu, Rick Boivie, and Ian Kjos.
# ==> Comments added by the author of this document.
search () {
for dir in `echo *`
# ==> `echo *` lists all the files in current working directory,
#+ ==> without line breaks.
# ==> Similar effect to for dir in *
# ==> but "dir in `echo *`" will not handle filenames with blanks.
do
if [ -d "$dir" ] ; then # ==> If it is a directory (-d)...
zz=0 # ==> Temp variable, keeping track of
# directory level.
while [ $zz != $1 ] # Keep track of inner nested loop.
Appendix A. Contributed Scripts 570](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-576-320.jpg)
![Advanced Bash-Scripting Guide
do
echo -n "| " # ==> Display vertical connector symbol,
# ==> with 2 spaces & no line feed
# in order to indent.
zz=`expr $zz + 1` # ==> Increment zz.
done
if [ -L "$dir" ] ; then # ==> If directory is a symbolic link...
echo "+---$dir" `ls -l $dir | sed 's/^.*'$dir' //'`
# ==> Display horiz. connector and list directory name, but...
# ==> delete date/time part of long listing.
else
echo "+---$dir" # ==> Display horizontal connector symbol...
# ==> and print directory name.
numdirs=`expr $numdirs + 1` # ==> Increment directory count.
if cd "$dir" ; then # ==> If can move to subdirectory...
search `expr $1 + 1` # with recursion ;-)
# ==> Function calls itself.
cd ..
fi
fi
fi
done
}
if [ $# != 0 ] ; then
cd $1 # Move to indicated directory.
#else # stay in current directory
fi
echo "Initial directory = `pwd`"
numdirs=0
search 0
echo "Total directories = $numdirs"
exit 0
Patsie's version of a directory tree script.
Example A-17. tree2: Alternate directory tree script
#!/bin/bash
# tree2.sh
# Lightly modified/reformatted by ABS Guide author.
# Included in ABS Guide with permission of script author (thanks!).
## Recursive file/dirsize checking script, by Patsie
##
## This script builds a list of files/directories and their size (du -akx)
## and processes this list to a human readable tree shape
## The 'du -akx' is only as good as the permissions the owner has.
## So preferably run as root* to get the best results, or use only on
## directories for which you have read permissions. Anything you can't
## read is not in the list.
#* ABS Guide author advises caution when running scripts as root!
########## THIS IS CONFIGURABLE ##########
Appendix A. Contributed Scripts 571](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-577-320.jpg)
![Advanced Bash-Scripting Guide
TOP=5 # Top 5 biggest (sub)directories.
MAXRECURS=5 # Max 5 subdirectories/recursions deep.
E_BL=80 # Blank line already returned.
E_DIR=81 # Directory not specified.
########## DON'T CHANGE ANYTHING BELOW THIS LINE ##########
PID=$$ # Our own process ID.
SELF=`basename $0` # Our own program name.
TMP="/tmp/${SELF}.${PID}.tmp" # Temporary 'du' result.
# Convert number to dotted thousand.
function dot { echo " $*" |
sed -e :a -e 's/(.*[0-9])([0-9]{3})/1,2/;ta' |
tail -c 12; }
# Usage: tree <recursion> <indent prefix> <min size> <directory>
function tree {
recurs="$1" # How deep nested are we?
prefix="$2" # What do we display before file/dirname?
minsize="$3" # What is the minumum file/dirsize?
dirname="$4" # Which directory are we checking?
# Get ($TOP) biggest subdirs/subfiles from TMP file.
LIST=`egrep "[[:space:]]${dirname}/[^/]*$" "$TMP" |
awk '{if($1>'$minsize') print;}' | sort -nr | head -$TOP`
[ -z "$LIST" ] && return # Empty list, then go back.
cnt=0
num=`echo "$LIST" | wc -l` # How many entries in the list.
## Main loop
echo "$LIST" | while read size name; do
((cnt+=1)) # Count entry number.
bname=`basename "$name"` # We only need a basename of the entry.
[ -d "$name" ] && bname="$bname/"
# If it's a directory, append a slash.
echo "`dot $size`$prefix +-$bname"
# Display the result.
# Call ourself recursively if it's a directory
#+ and we're not nested too deep ($MAXRECURS).
# The recursion goes up: $((recurs+1))
# The prefix gets a space if it's the last entry,
#+ or a pipe if there are more entries.
# The minimum file/dirsize becomes
#+ a tenth of his parent: $((size/10)).
# Last argument is the full directory name to check.
if [ -d "$name" -a $recurs -lt $MAXRECURS ]; then
[ $cnt -lt $num ]
|| (tree $((recurs+1)) "$prefix " $((size/10)) "$name")
&& (tree $((recurs+1)) "$prefix |" $((size/10)) "$name")
fi
done
[ $? -eq 0 ] && echo " $prefix"
# Every time we jump back add a 'blank' line.
return $E_BL
# We return 80 to tell we added a blank line already.
}
Appendix A. Contributed Scripts 572](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-578-320.jpg)
![Advanced Bash-Scripting Guide
### ###
### main program ###
### ###
rootdir="$@"
[ -d "$rootdir" ] ||
{ echo "$SELF: Usage: $SELF <directory>" >&2; exit $E_DIR; }
# We should be called with a directory name.
echo "Building inventory list, please wait ..."
# Show "please wait" message.
du -akx "$rootdir" 1>"$TMP" 2>/dev/null
# Build a temporary list of all files/dirs and their size.
size=`tail -1 "$TMP" | awk '{print $1}'`
# What is our rootdirectory's size?
echo "`dot $size` $rootdir"
# Display rootdirectory's entry.
tree 0 "" 0 "$rootdir"
# Display the tree below our rootdirectory.
rm "$TMP" 2>/dev/null
# Clean up TMP file.
exit $?
Noah Friedman permitted use of his string function script. It essentially reproduces some of the C-library
string manipulation functions.
Example A-18. string functions: C-style string functions
#!/bin/bash
# string.bash --- bash emulation of string(3) library routines
# Author: Noah Friedman <friedman@prep.ai.mit.edu>
# ==> Used with his kind permission in this document.
# Created: 1992-07-01
# Last modified: 1993-09-29
# Public domain
# Conversion to bash v2 syntax done by Chet Ramey
# Commentary:
# Code:
#:docstring strcat:
# Usage: strcat s1 s2
#
# Strcat appends the value of variable s2 to variable s1.
#
# Example:
# a="foo"
# b="bar"
# strcat a b
# echo $a
# => foobar
#
#:end docstring:
###;;;autoload ==> Autoloading of function commented out.
function strcat ()
Appendix A. Contributed Scripts 573](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-579-320.jpg)
![Advanced Bash-Scripting Guide
{
local s1_val s2_val
s1_val=${!1} # indirect variable expansion
s2_val=${!2}
eval "$1"='"${s1_val}${s2_val}"'
# ==> eval $1='${s1_val}${s2_val}' avoids problems,
# ==> if one of the variables contains a single quote.
}
#:docstring strncat:
# Usage: strncat s1 s2 $n
#
# Line strcat, but strncat appends a maximum of n characters from the value
# of variable s2. It copies fewer if the value of variabl s2 is shorter
# than n characters. Echoes result on stdout.
#
# Example:
# a=foo
# b=barbaz
# strncat a b 3
# echo $a
# => foobar
#
#:end docstring:
###;;;autoload
function strncat ()
{
local s1="$1"
local s2="$2"
local -i n="$3"
local s1_val s2_val
s1_val=${!s1} # ==> indirect variable expansion
s2_val=${!s2}
if [ ${#s2_val} -gt ${n} ]; then
s2_val=${s2_val:0:$n} # ==> substring extraction
fi
eval "$s1"='"${s1_val}${s2_val}"'
# ==> eval $1='${s1_val}${s2_val}' avoids problems,
# ==> if one of the variables contains a single quote.
}
#:docstring strcmp:
# Usage: strcmp $s1 $s2
#
# Strcmp compares its arguments and returns an integer less than, equal to,
# or greater than zero, depending on whether string s1 is lexicographically
# less than, equal to, or greater than string s2.
#:end docstring:
###;;;autoload
function strcmp ()
{
[ "$1" = "$2" ] && return 0
[ "${1}" '<' "${2}" ] > /dev/null && return -1
return 1
Appendix A. Contributed Scripts 574](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-580-320.jpg)
![Advanced Bash-Scripting Guide
}
#:docstring strncmp:
# Usage: strncmp $s1 $s2 $n
#
# Like strcmp, but makes the comparison by examining a maximum of n
# characters (n less than or equal to zero yields equality).
#:end docstring:
###;;;autoload
function strncmp ()
{
if [ -z "${3}" -o "${3}" -le "0" ]; then
return 0
fi
if [ ${3} -ge ${#1} -a ${3} -ge ${#2} ]; then
strcmp "$1" "$2"
return $?
else
s1=${1:0:$3}
s2=${2:0:$3}
strcmp $s1 $s2
return $?
fi
}
#:docstring strlen:
# Usage: strlen s
#
# Strlen returns the number of characters in string literal s.
#:end docstring:
###;;;autoload
function strlen ()
{
eval echo "${#${1}}"
# ==> Returns the length of the value of the variable
# ==> whose name is passed as an argument.
}
#:docstring strspn:
# Usage: strspn $s1 $s2
#
# Strspn returns the length of the maximum initial segment of string s1,
# which consists entirely of characters from string s2.
#:end docstring:
###;;;autoload
function strspn ()
{
# Unsetting IFS allows whitespace to be handled as normal chars.
local IFS=
local result="${1%%[!${2}]*}"
echo ${#result}
}
#:docstring strcspn:
# Usage: strcspn $s1 $s2
#
# Strcspn returns the length of the maximum initial segment of string s1,
Appendix A. Contributed Scripts 575](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-581-320.jpg)
![Advanced Bash-Scripting Guide
# which consists entirely of characters not from string s2.
#:end docstring:
###;;;autoload
function strcspn ()
{
# Unsetting IFS allows whitspace to be handled as normal chars.
local IFS=
local result="${1%%[${2}]*}"
echo ${#result}
}
#:docstring strstr:
# Usage: strstr s1 s2
#
# Strstr echoes a substring starting at the first occurrence of string s2 in
# string s1, or nothing if s2 does not occur in the string. If s2 points to
# a string of zero length, strstr echoes s1.
#:end docstring:
###;;;autoload
function strstr ()
{
# if s2 points to a string of zero length, strstr echoes s1
[ ${#2} -eq 0 ] && { echo "$1" ; return 0; }
# strstr echoes nothing if s2 does not occur in s1
case "$1" in
*$2*) ;;
*) return 1;;
esac
# use the pattern matching code to strip off the match and everything
# following it
first=${1/$2*/}
# then strip off the first unmatched portion of the string
echo "${1##$first}"
}
#:docstring strtok:
# Usage: strtok s1 s2
#
# Strtok considers the string s1 to consist of a sequence of zero or more
# text tokens separated by spans of one or more characters from the
# separator string s2. The first call (with a non-empty string s1
# specified) echoes a string consisting of the first token on stdout. The
# function keeps track of its position in the string s1 between separate
# calls, so that subsequent calls made with the first argument an empty
# string will work through the string immediately following that token. In
# this way subsequent calls will work through the string s1 until no tokens
# remain. The separator string s2 may be different from call to call.
# When no token remains in s1, an empty value is echoed on stdout.
#:end docstring:
###;;;autoload
function strtok ()
{
:
}
Appendix A. Contributed Scripts 576](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-582-320.jpg)
![Advanced Bash-Scripting Guide
/home/mszick/core
/proc/982/fd/0 -> /dev/null
/proc/982/fd/1 -> /home/mszick/.xsession-errors
/proc/982/fd/13 -> /tmp/tmpfZVVOCs (deleted)
/proc/982/fd/7 -> /tmp/kde-mszick/ksycoca
/proc/982/fd/8 -> socket:[11586]
/proc/982/fd/9 -> pipe:[11588]
If that isn't enough to keep your parser guessing,
either or both of the path components may be relative:
../Built-Shared -> Built-Static
../linux-2.4.20.tar.bz2 -> ../../../SRCS/linux-2.4.20.tar.bz2
The first character of the 11 (10?) character permissions field:
's' Socket
'd' Directory
'b' Block device
'c' Character device
'l' Symbolic link
NOTE: Hard links not marked - test for identical inode numbers
on identical filesystems.
All information about hard linked files are shared, except
for the names and the name's location in the directory system.
NOTE: A "Hard link" is known as a "File Alias" on some systems.
'-' An undistingushed file
Followed by three groups of letters for: User, Group, Others
Character 1: '-' Not readable; 'r' Readable
Character 2: '-' Not writable; 'w' Writable
Character 3, User and Group: Combined execute and special
'-' Not Executable, Not Special
'x' Executable, Not Special
's' Executable, Special
'S' Not Executable, Special
Character 3, Others: Combined execute and sticky (tacky?)
'-' Not Executable, Not Tacky
'x' Executable, Not Tacky
't' Executable, Tacky
'T' Not Executable, Tacky
Followed by an access indicator
Haven't tested this one, it may be the eleventh character
or it may generate another field
' ' No alternate access
'+' Alternate access
LSfieldsDoc
ListDirectory()
{
local -a T
local -i of=0 # Default return in variable
# OLD_IFS=$IFS # Using BASH default ' tn'
case "$#" in
3) case "$1" in
-of) of=1 ; shift ;;
* ) return 1 ;;
esac ;;
2) : ;; # Poor man's "continue"
*) return 1 ;;
esac
Appendix A. Contributed Scripts 579](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-585-320.jpg)
![Advanced Bash-Scripting Guide
# NOTE: the (ls) command is NOT quoted (")
T=( $(ls --inode --ignore-backups --almost-all --directory
--full-time --color=none --time=status --sort=none
--format=long $1) )
case $of in
# Assign T back to the array whose name was passed as $2
0) eval $2=( "${T[@]}" ) ;;
# Write T into filename passed as $2
1) echo "${T[@]}" > "$2" ;;
esac
return 0
}
# # # # # Is that string a legal number? # # # # #
#
# IsNumber "Var"
# # # # # There has to be a better way, sigh...
IsNumber()
{
local -i int
if [ $# -eq 0 ]
then
return 1
else
(let int=$1) 2>/dev/null
return $? # Exit status of the let thread
fi
}
# # # # # Index Filesystem Directory Information # # # # #
#
# IndexList "Field-Array-Name" "Index-Array-Name"
# or
# IndexList -if Field-Array-Filename Index-Array-Name
# IndexList -of Field-Array-Name Index-Array-Filename
# IndexList -if -of Field-Array-Filename Index-Array-Filename
# # # # #
: <<IndexListDoc
Walk an array of directory fields produced by ListDirectory
Having suppressed the line breaks in an otherwise line oriented
report, build an index to the array element which starts each line.
Each line gets two index entries, the first element of each line
(inode) and the element that holds the pathname of the file.
The first index entry pair (Line-Number==0) are informational:
Index-Array-Name[0] : Number of "Lines" indexed
Index-Array-Name[1] : "Current Line" pointer into Index-Array-Name
The following index pairs (if any) hold element indexes into
the Field-Array-Name per:
Index-Array-Name[Line-Number * 2] : The "inode" field element.
NOTE: This distance may be either +11 or +12 elements.
Index-Array-Name[(Line-Number * 2) + 1] : The "pathname" element.
NOTE: This distance may be a variable number of elements.
Next line index pair for Line-Number+1.
IndexListDoc
Appendix A. Contributed Scripts 580](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-586-320.jpg)
![Advanced Bash-Scripting Guide
IndexList()
{
local -a LIST # Local of listname passed
local -a -i INDEX=( 0 0 ) # Local of index to return
local -i Lidx Lcnt
local -i if=0 of=0 # Default to variable names
case "$#" in # Simplistic option testing
0) return 1 ;;
1) return 1 ;;
2) : ;; # Poor man's continue
3) case "$1" in
-if) if=1 ;;
-of) of=1 ;;
* ) return 1 ;;
esac ; shift ;;
4) if=1 ; of=1 ; shift ; shift ;;
*) return 1
esac
# Make local copy of list
case "$if" in
0) eval LIST=( "${$1[@]}" ) ;;
1) LIST=( $(cat $1) ) ;;
esac
# Grok (grope?) the array
Lcnt=${#LIST[@]}
Lidx=0
until (( Lidx >= Lcnt ))
do
if IsNumber ${LIST[$Lidx]}
then
local -i inode name
local ft
inode=Lidx
local m=${LIST[$Lidx+2]} # Hard Links field
ft=${LIST[$Lidx+1]:0:1} # Fast-Stat
case $ft in
b) ((Lidx+=12)) ;; # Block device
c) ((Lidx+=12)) ;; # Character device
*) ((Lidx+=11)) ;; # Anything else
esac
name=Lidx
case $ft in
-) ((Lidx+=1)) ;; # The easy one
b) ((Lidx+=1)) ;; # Block device
c) ((Lidx+=1)) ;; # Character device
d) ((Lidx+=1)) ;; # The other easy one
l) ((Lidx+=3)) ;; # At LEAST two more fields
# A little more elegance here would handle pipes,
#+ sockets, deleted files - later.
*) until IsNumber ${LIST[$Lidx]} || ((Lidx >= Lcnt))
do
((Lidx+=1))
done
;; # Not required
esac
INDEX[${#INDEX[*]}]=$inode
Appendix A. Contributed Scripts 581](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-587-320.jpg)
![Advanced Bash-Scripting Guide
INDEX[${#INDEX[*]}]=$name
INDEX[0]=${INDEX[0]}+1 # One more "line" found
# echo "Line: ${INDEX[0]} Type: $ft Links: $m Inode:
# ${LIST[$inode]} Name: ${LIST[$name]}"
else
((Lidx+=1))
fi
done
case "$of" in
0) eval $2=( "${INDEX[@]}" ) ;;
1) echo "${INDEX[@]}" > "$2" ;;
esac
return 0 # What could go wrong?
}
# # # # # Content Identify File # # # # #
#
# DigestFile Input-Array-Name Digest-Array-Name
# or
# DigestFile -if Input-FileName Digest-Array-Name
# # # # #
# Here document used as a comment block.
: <<DigestFilesDoc
The key (no pun intended) to a Unified Content File System (UCFS)
is to distinguish the files in the system based on their content.
Distinguishing files by their name is just, so, 20th Century.
The content is distinguished by computing a checksum of that content.
This version uses the md5sum program to generate a 128 bit checksum
representative of the file's contents.
There is a chance that two files having different content might
generate the same checksum using md5sum (or any checksum). Should
that become a problem, then the use of md5sum can be replace by a
cyrptographic signature. But until then...
The md5sum program is documented as outputting three fields (and it
does), but when read it appears as two fields (array elements). This
is caused by the lack of whitespace between the second and third field.
So this function gropes the md5sum output and returns:
[0] 32 character checksum in hexidecimal (UCFS filename)
[1] Single character: ' ' text file, '*' binary file
[2] Filesystem (20th Century Style) name
Note: That name may be the character '-' indicating STDIN read.
DigestFilesDoc
DigestFile()
{
local if=0 # Default, variable name
local -a T1 T2
case "$#" in
3) case "$1" in
-if) if=1 ; shift ;;
* ) return 1 ;;
esac ;;
2) : ;; # Poor man's "continue"
Appendix A. Contributed Scripts 582](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-588-320.jpg)
![Advanced Bash-Scripting Guide
*) return 1 ;;
esac
case $if in
0) eval T1=( "${$1[@]}" )
T2=( $(echo ${T1[@]} | md5sum -) )
;;
1) T2=( $(md5sum $1) )
;;
esac
case ${#T2[@]} in
0) return 1 ;;
1) return 1 ;;
2) case ${T2[1]:0:1} in # SanScrit-2.0.5
*) T2[${#T2[@]}]=${T2[1]:1}
T2[1]=*
;;
*) T2[${#T2[@]}]=${T2[1]}
T2[1]=" "
;;
esac
;;
3) : ;; # Assume it worked
*) return 1 ;;
esac
local -i len=${#T2[0]}
if [ $len -ne 32 ] ; then return 1 ; fi
eval $2=( "${T2[@]}" )
}
# # # # # Locate File # # # # #
#
# LocateFile [-l] FileName Location-Array-Name
# or
# LocateFile [-l] -of FileName Location-Array-FileName
# # # # #
# A file location is Filesystem-id and inode-number
# Here document used as a comment block.
: <<StatFieldsDoc
Based on stat, version 2.2
stat -t and stat -lt fields
[0] name
[1] Total size
File - number of bytes
Symbolic link - string length of pathname
[2] Number of (512 byte) blocks allocated
[3] File type and Access rights (hex)
[4] User ID of owner
[5] Group ID of owner
[6] Device number
[7] Inode number
[8] Number of hard links
[9] Device type (if inode device) Major
[10] Device type (if inode device) Minor
[11] Time of last access
May be disabled in 'mount' with noatime
atime of files changed by exec, read, pipe, utime, mknod (mmap?)
atime of directories changed by addition/deletion of files
Appendix A. Contributed Scripts 583](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-589-320.jpg)
![Advanced Bash-Scripting Guide
[12] Time of last modification
mtime of files changed by write, truncate, utime, mknod
mtime of directories changed by addtition/deletion of files
[13] Time of last change
ctime reflects time of changed inode information (owner, group
permissions, link count
-*-*- Per:
Return code: 0
Size of array: 14
Contents of array
Element 0: /home/mszick
Element 1: 4096
Element 2: 8
Element 3: 41e8
Element 4: 500
Element 5: 500
Element 6: 303
Element 7: 32385
Element 8: 22
Element 9: 0
Element 10: 0
Element 11: 1051221030
Element 12: 1051214068
Element 13: 1051214068
For a link in the form of linkname -> realname
stat -t linkname returns the linkname (link) information
stat -lt linkname returns the realname information
stat -tf and stat -ltf fields
[0] name
[1] ID-0? # Maybe someday, but Linux stat structure
[2] ID-0? # does not have either LABEL nor UUID
# fields, currently information must come
# from file-system specific utilities
These will be munged into:
[1] UUID if possible
[2] Volume Label if possible
Note: 'mount -l' does return the label and could return the UUID
[3] Maximum length of filenames
[4] Filesystem type
[5] Total blocks in the filesystem
[6] Free blocks
[7] Free blocks for non-root user(s)
[8] Block size of the filesystem
[9] Total inodes
[10] Free inodes
-*-*- Per:
Return code: 0
Size of array: 11
Contents of array
Element 0: /home/mszick
Element 1: 0
Element 2: 0
Element 3: 255
Element 4: ef53
Element 5: 2581445
Element 6: 2277180
Element 7: 2146050
Element 8: 4096
Appendix A. Contributed Scripts 584](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-590-320.jpg)
![Advanced Bash-Scripting Guide
Element 9: 1311552
Element 10: 1276425
StatFieldsDoc
# LocateFile [-l] FileName Location-Array-Name
# LocateFile [-l] -of FileName Location-Array-FileName
LocateFile()
{
local -a LOC LOC1 LOC2
local lk="" of=0
case "$#" in
0) return 1 ;;
1) return 1 ;;
2) : ;;
*) while (( "$#" > 2 ))
do
case "$1" in
-l) lk=-1 ;;
-of) of=1 ;;
*) return 1 ;;
esac
shift
done ;;
esac
# More Sanscrit-2.0.5
# LOC1=( $(stat -t $lk $1) )
# LOC2=( $(stat -tf $lk $1) )
# Uncomment above two lines if system has "stat" command installed.
LOC=( ${LOC1[@]:0:1} ${LOC1[@]:3:11}
${LOC2[@]:1:2} ${LOC2[@]:4:1} )
case "$of" in
0) eval $2=( "${LOC[@]}" ) ;;
1) echo "${LOC[@]}" > "$2" ;;
esac
return 0
# Which yields (if you are lucky, and have "stat" installed)
# -*-*- Location Discriptor -*-*-
# Return code: 0
# Size of array: 15
# Contents of array
# Element 0: /home/mszick 20th Century name
# Element 1: 41e8 Type and Permissions
# Element 2: 500 User
# Element 3: 500 Group
# Element 4: 303 Device
# Element 5: 32385 inode
# Element 6: 22 Link count
# Element 7: 0 Device Major
# Element 8: 0 Device Minor
# Element 9: 1051224608 Last Access
# Element 10: 1051214068 Last Modify
# Element 11: 1051214068 Last Status
# Element 12: 0 UUID (to be)
# Element 13: 0 Volume Label (to be)
# Element 14: ef53 Filesystem type
}
Appendix A. Contributed Scripts 585](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-591-320.jpg)
![Advanced Bash-Scripting Guide
# And then there was some test code
ListArray() # ListArray Name
{
local -a Ta
eval Ta=( "${$1[@]}" )
echo
echo "-*-*- List of Array -*-*-"
echo "Size of array $1: ${#Ta[*]}"
echo "Contents of array $1:"
for (( i=0 ; i<${#Ta[*]} ; i++ ))
do
echo -e "tElement $i: ${Ta[$i]}"
done
return 0
}
declare -a CUR_DIR
# For small arrays
ListDirectory "${PWD}" CUR_DIR
ListArray CUR_DIR
declare -a DIR_DIG
DigestFile CUR_DIR DIR_DIG
echo "The new "name" (checksum) for ${CUR_DIR[9]} is ${DIR_DIG[0]}"
declare -a DIR_ENT
# BIG_DIR # For really big arrays - use a temporary file in ramdisk
# BIG-DIR # ListDirectory -of "${CUR_DIR[11]}/*" "/tmpfs/junk2"
ListDirectory "${CUR_DIR[11]}/*" DIR_ENT
declare -a DIR_IDX
# BIG-DIR # IndexList -if "/tmpfs/junk2" DIR_IDX
IndexList DIR_ENT DIR_IDX
declare -a IDX_DIG
# BIG-DIR # DIR_ENT=( $(cat /tmpfs/junk2) )
# BIG-DIR # DigestFile -if /tmpfs/junk2 IDX_DIG
DigestFile DIR_ENT IDX_DIG
# Small (should) be able to parallize IndexList & DigestFile
# Large (should) be able to parallize IndexList & DigestFile & the assignment
echo "The "name" (checksum) for the contents of ${PWD} is ${IDX_DIG[0]}"
declare -a FILE_LOC
LocateFile ${PWD} FILE_LOC
ListArray FILE_LOC
exit 0
Stéphane Chazelas demonstrates object-oriented programming in a Bash script.
Mariusz Gniazdowski contributed a hash library for use in scripts.
Example A-20. Library of hash functions
# Hash:
Appendix A. Contributed Scripts 586](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-592-320.jpg)
![Advanced Bash-Scripting Guide
# Hash function library
# Author: Mariusz Gniazdowski <mariusz.gn-at-gmail.com>
# Date: 2005-04-07
# Functions making emulating hashes in Bash a little less painful.
# Limitations:
# * Only global variables are supported.
# * Each hash instance generates one global variable per value.
# * Variable names collisions are possible
#+ if you define variable like __hash__hashname_key
# * Keys must use chars that can be part of a Bash variable name
#+ (no dashes, periods, etc.).
# * The hash is created as a variable:
# ... hashname_keyname
# So if somone will create hashes like:
# myhash_ + mykey = myhash__mykey
# myhash + _mykey = myhash__mykey
# Then there will be a collision.
# (This should not pose a major problem.)
Hash_config_varname_prefix=__hash__
# Emulates: hash[key]=value
#
# Params:
# 1 - hash
# 2 - key
# 3 - value
function hash_set {
eval "${Hash_config_varname_prefix}${1}_${2}="${3}""
}
# Emulates: value=hash[key]
#
# Params:
# 1 - hash
# 2 - key
# 3 - value (name of global variable to set)
function hash_get_into {
eval "$3="$${Hash_config_varname_prefix}${1}_${2}""
}
# Emulates: echo hash[key]
#
# Params:
# 1 - hash
# 2 - key
# 3 - echo params (like -n, for example)
function hash_echo {
eval "echo $3 "$${Hash_config_varname_prefix}${1}_${2}""
}
# Emulates: hash1[key1]=hash2[key2]
#
# Params:
Appendix A. Contributed Scripts 587](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-593-320.jpg)
![Advanced Bash-Scripting Guide
# 1 - hash1
# 2 - key1
# 3 - hash2
# 4 - key2
function hash_copy {
eval "${Hash_config_varname_prefix}${1}_${2}
="$${Hash_config_varname_prefix}${3}_${4}""
}
# Emulates: hash[keyN-1]=hash[key2]=...hash[key1]
#
# Copies first key to rest of keys.
#
# Params:
# 1 - hash1
# 2 - key1
# 3 - key2
# . . .
# N - keyN
function hash_dup {
local hashName="$1" keyName="$2"
shift 2
until [ ${#} -le 0 ]; do
eval "${Hash_config_varname_prefix}${hashName}_${1}
="$${Hash_config_varname_prefix}${hashName}_${keyName}""
shift;
done;
}
# Emulates: unset hash[key]
#
# Params:
# 1 - hash
# 2 - key
function hash_unset {
eval "unset ${Hash_config_varname_prefix}${1}_${2}"
}
# Emulates something similar to: ref=&hash[key]
#
# The reference is name of the variable in which value is held.
#
# Params:
# 1 - hash
# 2 - key
# 3 - ref - Name of global variable to set.
function hash_get_ref_into {
eval "$3="${Hash_config_varname_prefix}${1}_${2}""
}
# Emulates something similar to: echo &hash[key]
#
# That reference is name of variable in which value is held.
#
# Params:
# 1 - hash
# 2 - key
# 3 - echo params (like -n for example)
Appendix A. Contributed Scripts 588](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-594-320.jpg)
#
# Params:
# 1 - hash
# 2 - key
# 3,4, ... - Function parameters
function hash_call {
local hash key
hash=$1
key=$2
shift 2
eval "eval "$${Hash_config_varname_prefix}${hash}_${key} "$@"""
}
# Emulates something similar to: isset(hash[key]) or hash[key]==NULL
#
# Params:
# 1 - hash
# 2 - key
# Returns:
# 0 - there is such key
# 1 - there is no such key
function hash_is_set {
eval "if [[ "${${Hash_config_varname_prefix}${1}_${2}-a}" = "a" &&
"${${Hash_config_varname_prefix}${1}_${2}-b}" = "b" ]]
then return 1; else return 0; fi"
}
# Emulates something similar to:
# foreach($hash as $key => $value) { fun($key,$value); }
#
# It is possible to write different variations of this function.
# Here we use a function call to make it as "generic" as possible.
#
# Params:
# 1 - hash
# 2 - function name
function hash_foreach {
local keyname oldIFS="$IFS"
IFS=' '
for i in $(eval "echo ${!${Hash_config_varname_prefix}${1}_*}"); do
keyname=$(eval "echo ${i##${Hash_config_varname_prefix}${1}_}")
eval "$2 $keyname "$$i""
done
IFS="$oldIFS"
}
# NOTE: In lines 103 and 116, ampersand changed.
# But, it doesn't matter, because these are comment lines anyhow.
Here is an example script using the foregoing hash library.
Example A-21. Colorizing text using hash functions
Appendix A. Contributed Scripts 589](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-595-320.jpg)
![Advanced Bash-Scripting Guide
Example A-22. More on hash functions
#!/bin/bash
# $Id: ha.sh,v 1.2 2005/04/21 23:24:26 oliver Exp $
# Copyright 2005 Oliver Beckstein
# Released under the GNU Public License
# Author of script granted permission for inclusion in ABS Guide.
# (Thank you!)
#----------------------------------------------------------------
# pseudo hash based on indirect parameter expansion
# API: access through functions:
#
# create the hash:
#
# newhash Lovers
#
# add entries (note single quotes for spaces)
#
# addhash Lovers Tristan Isolde
# addhash Lovers 'Romeo Montague' 'Juliet Capulet'
#
# access value by key
#
# gethash Lovers Tristan ----> Isolde
#
# show all keys
#
# keyshash Lovers ----> 'Tristan' 'Romeo Montague'
#
#
# Convention: instead of perls' foo{bar} = boing' syntax,
# use
# '_foo_bar=boing' (two underscores, no spaces)
#
# 1) store key in _NAME_keys[]
# 2) store value in _NAME_values[] using the same integer index
# The integer index for the last entry is _NAME_ptr
#
# NOTE: No error or sanity checks, just bare bones.
function _inihash () {
# private function
# call at the beginning of each procedure
# defines: _keys _values _ptr
#
# Usage: _inihash NAME
local name=$1
_keys=_${name}_keys
_values=_${name}_values
_ptr=_${name}_ptr
}
function newhash () {
# Usage: newhash NAME
# NAME should not contain spaces or dots.
# Actually: it must be a legal name for a Bash variable.
# We rely on Bash automatically recognising arrays.
local name=$1
local _keys _values _ptr
_inihash ${name}
Appendix A. Contributed Scripts 591](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-597-320.jpg)
![Advanced Bash-Scripting Guide
eval ${_ptr}=0
}
function addhash () {
# Usage: addhash NAME KEY 'VALUE with spaces'
# arguments with spaces need to be quoted with single quotes ''
local name=$1 k="$2" v="$3"
local _keys _values _ptr
_inihash ${name}
#echo "DEBUG(addhash): ${_ptr}=${!_ptr}"
eval let ${_ptr}=${_ptr}+1
eval "$_keys[${!_ptr}]="${k}""
eval "$_values[${!_ptr}]="${v}""
}
function gethash () {
# Usage: gethash NAME KEY
# Returns boing
# ERR=0 if entry found, 1 otherwise
# That's not a proper hash --
#+ we simply linearly search through the keys.
local name=$1 key="$2"
local _keys _values _ptr
local k v i found h
_inihash ${name}
# _ptr holds the highest index in the hash
found=0
for i in $(seq 1 ${!_ptr}); do
h="${${_keys}[${i}]}" # Safer to do it in two steps,
eval k=${h} #+ especially when quoting for spaces.
if [ "${k}" = "${key}" ]; then found=1; break; fi
done;
[ ${found} = 0 ] && return 1;
# else: i is the index that matches the key
h="${${_values}[${i}]}"
eval echo "${h}"
return 0;
}
function keyshash () {
# Usage: keyshash NAME
# Returns list of all keys defined for hash name.
local name=$1 key="$2"
local _keys _values _ptr
local k i h
_inihash ${name}
# _ptr holds the highest index in the hash
for i in $(seq 1 ${!_ptr}); do
h="${${_keys}[${i}]}" # Safer to do it in two steps,
eval k=${h} #+ especially when quoting for spaces.
echo -n "'${k}' "
done;
}
Appendix A. Contributed Scripts 592](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-598-320.jpg)
![Advanced Bash-Scripting Guide
# ==> Comments added by ABS Guide author.
SYMLINKDEV=/dev/diskonkey
MOUNTPOINT=/mnt/diskonkey
DEVLABEL=/sbin/devlabel
DEVLABELCONFIG=/etc/sysconfig/devlabel
IAM=$0
##
# Functions lifted near-verbatim from usb-mount code.
#
function allAttachedScsiUsb {
find /proc/scsi/ -path '/proc/scsi/usb-storage*' -type f |
xargs grep -l 'Attached: Yes'
}
function scsiDevFromScsiUsb {
echo $1 | awk -F"[-/]" '{ n=$(NF-1);
print "/dev/sd" substr("abcdefghijklmnopqrstuvwxyz", n+1, 1) }'
}
if [ "${ACTION}" = "add" ] && [ -f "${DEVICE}" ]; then
##
# lifted from usbcam code.
#
if [ -f /var/run/console.lock ]; then
CONSOLEOWNER=`cat /var/run/console.lock`
elif [ -f /var/lock/console.lock ]; then
CONSOLEOWNER=`cat /var/lock/console.lock`
else
CONSOLEOWNER=
fi
for procEntry in $(allAttachedScsiUsb); do
scsiDev=$(scsiDevFromScsiUsb $procEntry)
# Some bug with usb-storage?
# Partitions are not in /proc/partitions until they are accessed
#+ somehow.
/sbin/fdisk -l $scsiDev >/dev/null
##
# Most devices have partitioning info, so the data would be on
#+ /dev/sd?1. However, some stupider ones don't have any partitioning
#+ and use the entire device for data storage. This tries to
#+ guess semi-intelligently if we have a /dev/sd?1 and if not, then
#+ it uses the entire device and hopes for the better.
#
if grep -q `basename $scsiDev`1 /proc/partitions; then
part="$scsiDev""1"
else
part=$scsiDev
fi
##
# Change ownership of the partition to the console user so they can
#+ mount it.
#
if [ ! -z "$CONSOLEOWNER" ]; then
chown $CONSOLEOWNER:disk $part
fi
##
# This checks if we already have this UUID defined with devlabel.
# If not, it then adds the device to the list.
#
Appendix A. Contributed Scripts 594](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-600-320.jpg)
![Advanced Bash-Scripting Guide
prodid=`$DEVLABEL printid -d $part`
if ! grep -q $prodid $DEVLABELCONFIG; then
# cross our fingers and hope it works
$DEVLABEL add -d $part -s $SYMLINKDEV 2>/dev/null
fi
##
# Check if the mount point exists and create if it doesn't.
#
if [ ! -e $MOUNTPOINT ]; then
mkdir -p $MOUNTPOINT
fi
##
# Take care of /etc/fstab so mounting is easy.
#
if ! grep -q "^$SYMLINKDEV" /etc/fstab; then
# Add an fstab entry
echo -e
"$SYMLINKDEVtt$MOUNTPOINTttautotnoauto,owner,kudzu 0 0"
>> /etc/fstab
fi
done
if [ ! -z "$REMOVER" ]; then
##
# Make sure this script is triggered on device removal.
#
mkdir -p `dirname $REMOVER`
ln -s $IAM $REMOVER
fi
elif [ "${ACTION}" = "remove" ]; then
##
# If the device is mounted, unmount it cleanly.
#
if grep -q "$MOUNTPOINT" /etc/mtab; then
# unmount cleanly
umount -l $MOUNTPOINT
fi
##
# Remove it from /etc/fstab if it's there.
#
if grep -q "^$SYMLINKDEV" /etc/fstab; then
grep -v "^$SYMLINKDEV" /etc/fstab > /etc/.fstab.new
mv -f /etc/.fstab.new /etc/fstab
fi
fi
exit 0
Converting a text file to HTML format.
Example A-24. Converting to HTML
#!/bin/bash
# tohtml.sh [v. 0.2, reldate: 06/26/08, still buggy]
# Convert a text file to HTML format.
# Author: Mendel Cooper
# License: GPL3
# Usage: sh tohtml.sh < textfile > htmlfile
# Script can easily be modified to accept source and target filenames.
# Assumptions:
Appendix A. Contributed Scripts 595](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-601-320.jpg)
![Advanced Bash-Scripting Guide
# 1) Paragraphs in (target) text file are separated by a blank line.
# 2) Jpeg images (*.jpg) are located in "images" subdirectory.
# In the target file, the image names are enclosed in square brackets,
# for example, [image01.jpg].
# 3) Emphasized (italic) phrases begin with a space+underscore
#+ or the first character on the line is an underscore,
#+ and end with an underscore+space or underscore+end-of-line.
# Settings
FNTSIZE=2 # Small-medium font size
IMGDIR="images" # Image directory
# Headers
HDR01='<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">'
HDR02='<!-- Converted to HTML by ***tohtml.sh*** script -->'
HDR03='<!-- script author: M. Leo Cooper <thegrendel.abs@gmail.com> -->'
HDR10='<html>'
HDR11='<head>'
HDR11a='</head>'
HDR12a='<title>'
HDR12b='</title>'
HDR121='<META NAME="GENERATOR" CONTENT="tohtml.sh script">'
HDR13='<body bgcolor="#dddddd">' # Change background color to suit.
HDR14a='<font size='
HDR14b='>'
# Footers
FTR10='</body>'
FTR11='</html>'
# Tags
BOLD="<b>"
CENTER="<center>"
END_CENTER="</center>"
LF="<br>"
write_headers ()
{
echo "$HDR01"
echo
echo "$HDR02"
echo "$HDR03"
echo
echo
echo "$HDR10"
echo "$HDR11"
echo "$HDR121"
echo "$HDR11a"
echo "$HDR13"
echo
echo -n "$HDR14a"
echo -n "$FNTSIZE"
echo "$HDR14b"
echo
echo "$BOLD" # Everything in bold (more easily readable).
}
process_text ()
{
while read line # Read one line at a time.
do
{
Appendix A. Contributed Scripts 596](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-602-320.jpg)
![Advanced Bash-Scripting Guide
if [ ! "$line" ] # Blank line?
then # Then new paragraph must follow.
echo
echo "$LF" # Insert two <br> tags.
echo "$LF"
echo
continue # Skip the underscore test.
else # Otherwise . . .
if [[ "$line" =~ "[*jpg]" ]] # Is a graphic?
then # Strip away brackets.
temp=$( echo "$line" | sed -e 's/[//' -e 's/]//' )
line=""$CENTER" <img src=""$IMGDIR"/$temp"> "$END_CENTER" "
# Add image tag.
# And, center it.
fi
fi
echo "$line" | grep -q _
if [ "$?" -eq 0 ] # If line contains underscore ...
then
# ===================================================
# Convert underscored phrase to italics.
temp=$( echo "$line" |
sed -e 's/ _/ <i>/' -e 's/_/</i> /' |
sed -e 's/^_/<i>/' -e 's/_/</i>/' )
# Process only underscores prefixed by space,
#+ or at beginning or end of line.
# Do not convert underscores embedded within a word!
line="$temp"
# Slows script execution. Can be optimized?
# ===================================================
fi
echo
echo "$line"
echo
} # End while
done
} # End process_text ()
write_footers () # Termination tags.
{
echo "$FTR10"
echo "$FTR11"
}
# main () {
# =========
write_headers
process_text
write_footers
# =========
# }
exit $?
Appendix A. Contributed Scripts 597](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-603-320.jpg)
![Advanced Bash-Scripting Guide
# Exercises:
# ---------
# 1) Fixup: Check for closing underscore before a comma or period.
# 2) Add a test for the presence of a closing underscore
#+ in phrases to be italicized.
Here is something to warm the hearts of webmasters and mistresses: a script that saves weblogs.
Example A-25. Preserving weblogs
#!/bin/bash
# archiveweblogs.sh v1.0
# Troy Engel <tengel@fluid.com>
# Slightly modified by document author.
# Used with permission.
#
# This script will preserve the normally rotated and
#+ thrown away weblogs from a default RedHat/Apache installation.
# It will save the files with a date/time stamp in the filename,
#+ bzipped, to a given directory.
#
# Run this from crontab nightly at an off hour,
#+ as bzip2 can suck up some serious CPU on huge logs:
# 0 2 * * * /opt/sbin/archiveweblogs.sh
PROBLEM=66
# Set this to your backup dir.
BKP_DIR=/opt/backups/weblogs
# Default Apache/RedHat stuff
LOG_DAYS="4 3 2 1"
LOG_DIR=/var/log/httpd
LOG_FILES="access_log error_log"
# Default RedHat program locations
LS=/bin/ls
MV=/bin/mv
ID=/usr/bin/id
CUT=/bin/cut
COL=/usr/bin/column
BZ2=/usr/bin/bzip2
# Are we root?
USER=`$ID -u`
if [ "X$USER" != "X0" ]; then
echo "PANIC: Only root can run this script!"
exit $PROBLEM
fi
# Backup dir exists/writable?
if [ ! -x $BKP_DIR ]; then
echo "PANIC: $BKP_DIR doesn't exist or isn't writable!"
exit $PROBLEM
fi
# Move, rename and bzip2 the logs
for logday in $LOG_DAYS; do
Appendix A. Contributed Scripts 598](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-604-320.jpg)
![Advanced Bash-Scripting Guide
for logfile in $LOG_FILES; do
MYFILE="$LOG_DIR/$logfile.$logday"
if [ -w $MYFILE ]; then
DTS=`$LS -lgo --time-style=+%Y%m%d $MYFILE | $COL -t | $CUT -d ' ' -f7`
$MV $MYFILE $BKP_DIR/$logfile.$DTS
$BZ2 $BKP_DIR/$logfile.$DTS
else
# Only spew an error if the file exits (ergo non-writable).
if [ -f $MYFILE ]; then
echo "ERROR: $MYFILE not writable. Skipping."
fi
fi
done
done
exit 0
How to keep the shell from expanding and reinterpreting text strings.
Example A-26. Protecting literal strings
#! /bin/bash
# protect_literal.sh
# set -vx
:<<-'_Protect_Literal_String_Doc'
Copyright (c) Michael S. Zick, 2003; All Rights Reserved
License: Unrestricted reuse in any form, for any purpose.
Warranty: None
Revision: $ID$
Documentation redirected to the Bash no-operation.
Bash will '/dev/null' this block when the script is first read.
(Uncomment the above set command to see this action.)
Remove the first (Sha-Bang) line when sourcing this as a library
procedure. Also comment out the example use code in the two
places where shown.
Usage:
_protect_literal_str 'Whatever string meets your ${fancy}'
Just echos the argument to standard out, hard quotes
restored.
$(_protect_literal_str 'Whatever string meets your ${fancy}')
as the right-hand-side of an assignment statement.
Does:
As the right-hand-side of an assignment, preserves the
hard quotes protecting the contents of the literal during
assignment.
Notes:
The strange names (_*) are used to avoid trampling on
the user's chosen names when this is sourced as a
library.
_Protect_Literal_String_Doc
Appendix A. Contributed Scripts 599](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-605-320.jpg)
![Advanced Bash-Scripting Guide
# The 'for illustration' function form
_protect_literal_str() {
# Pick an un-used, non-printing character as local IFS.
# Not required, but shows that we are ignoring it.
local IFS=$'x1B' # ESC character
# Enclose the All-Elements-Of in hard quotes during assignment.
local tmp=$'x27'$@$'x27'
# local tmp=$'''$@$''' # Even uglier.
local len=${#tmp} # Info only.
echo $tmp is $len long. # Output AND information.
}
# This is the short-named version.
_pls() {
local IFS=$'x1B' # ESC character (not required)
echo $'x27'$@$'x27' # Hard quoted parameter glob
}
# :<<-'_Protect_Literal_String_Test'
# # # Remove the above "# " to disable this code. # # #
# See how that looks when printed.
echo
echo "- - Test One - -"
_protect_literal_str 'Hello $user'
_protect_literal_str 'Hello "${username}"'
echo
# Which yields:
# - - Test One - -
# 'Hello $user' is 13 long.
# 'Hello "${username}"' is 21 long.
# Looks as expected, but why all of the trouble?
# The difference is hidden inside the Bash internal order
#+ of operations.
# Which shows when you use it on the RHS of an assignment.
# Declare an array for test values.
declare -a arrayZ
# Assign elements with various types of quotes and escapes.
arrayZ=( zero "$(_pls 'Hello ${Me}')" 'Hello ${You}' "'Pass: ${pw}'" )
# Now list that array and see what is there.
echo "- - Test Two - -"
for (( i=0 ; i<${#arrayZ[*]} ; i++ ))
do
echo Element $i: ${arrayZ[$i]} is: ${#arrayZ[$i]} long.
done
echo
# Which yields:
# - - Test Two - -
# Element 0: zero is: 4 long. # Our marker element
# Element 1: 'Hello ${Me}' is: 13 long. # Our "$(_pls '...' )"
# Element 2: Hello ${You} is: 12 long. # Quotes are missing
Appendix A. Contributed Scripts 600](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-606-320.jpg)
![Advanced Bash-Scripting Guide
# Element 3: 'Pass: ' is: 10 long. # ${pw} expanded to nothing
# Now make an assignment with that result.
declare -a array2=( ${arrayZ[@]} )
# And print what happened.
echo "- - Test Three - -"
for (( i=0 ; i<${#array2[*]} ; i++ ))
do
echo Element $i: ${array2[$i]} is: ${#array2[$i]} long.
done
echo
# Which yields:
# - - Test Three - -
# Element 0: zero is: 4 long. # Our marker element.
# Element 1: Hello ${Me} is: 11 long. # Intended result.
# Element 2: Hello is: 5 long. # ${You} expanded to nothing.
# Element 3: 'Pass: is: 6 long. # Split on the whitespace.
# Element 4: ' is: 1 long. # The end quote is here now.
# Our Element 1 has had its leading and trailing hard quotes stripped.
# Although not shown, leading and trailing whitespace is also stripped.
# Now that the string contents are set, Bash will always, internally,
#+ hard quote the contents as required during its operations.
# Why?
# Considering our "$(_pls 'Hello ${Me}')" construction:
# " ... " -> Expansion required, strip the quotes.
# $( ... ) -> Replace with the result of..., strip this.
# _pls ' ... ' -> called with literal arguments, strip the quotes.
# The result returned includes hard quotes; BUT the above processing
#+ has already been done, so they become part of the value assigned.
#
# Similarly, during further usage of the string variable, the ${Me}
#+ is part of the contents (result) and survives any operations
# (Until explicitly told to evaluate the string).
# Hint: See what happens when the hard quotes ($'x27') are replaced
#+ with soft quotes ($'x22') in the above procedures.
# Interesting also is to remove the addition of any quoting.
# _Protect_Literal_String_Test
# # # Remove the above "# " to disable this code. # # #
exit 0
But, what if you want the shell to expand and reinterpret strings?
Example A-27. Unprotecting literal strings
#! /bin/bash
# unprotect_literal.sh
# set -vx
:<<-'_UnProtect_Literal_String_Doc'
Copyright (c) Michael S. Zick, 2003; All Rights Reserved
License: Unrestricted reuse in any form, for any purpose.
Warranty: None
Appendix A. Contributed Scripts 601](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-607-320.jpg)
![Advanced Bash-Scripting Guide
Revision: $ID$
Documentation redirected to the Bash no-operation. Bash will
'/dev/null' this block when the script is first read.
(Uncomment the above set command to see this action.)
Remove the first (Sha-Bang) line when sourcing this as a library
procedure. Also comment out the example use code in the two
places where shown.
Usage:
Complement of the "$(_pls 'Literal String')" function.
(See the protect_literal.sh example.)
StringVar=$(_upls ProtectedSringVariable)
Does:
When used on the right-hand-side of an assignment statement;
makes the substitions embedded in the protected string.
Notes:
The strange names (_*) are used to avoid trampling on
the user's chosen names when this is sourced as a
library.
_UnProtect_Literal_String_Doc
_upls() {
local IFS=$'x1B' # ESC character (not required)
eval echo $@ # Substitution on the glob.
}
# :<<-'_UnProtect_Literal_String_Test'
# # # Remove the above "# " to disable this code. # # #
_pls() {
local IFS=$'x1B' # ESC character (not required)
echo $'x27'$@$'x27' # Hard quoted parameter glob
}
# Declare an array for test values.
declare -a arrayZ
# Assign elements with various types of quotes and escapes.
arrayZ=( zero "$(_pls 'Hello ${Me}')" 'Hello ${You}' "'Pass: ${pw}'" )
# Now make an assignment with that result.
declare -a array2=( ${arrayZ[@]} )
# Which yielded:
# - - Test Three - -
# Element 0: zero is: 4 long # Our marker element.
# Element 1: Hello ${Me} is: 11 long # Intended result.
# Element 2: Hello is: 5 long # ${You} expanded to nothing.
# Element 3: 'Pass: is: 6 long # Split on the whitespace.
# Element 4: ' is: 1 long # The end quote is here now.
# set -vx
Appendix A. Contributed Scripts 602](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-608-320.jpg)
![Advanced Bash-Scripting Guide
# Initialize 'Me' to something for the embedded ${Me} substitution.
# This needs to be done ONLY just prior to evaluating the
#+ protected string.
# (This is why it was protected to begin with.)
Me="to the array guy."
# Set a string variable destination to the result.
newVar=$(_upls ${array2[1]})
# Show what the contents are.
echo $newVar
# Do we really need a function to do this?
newerVar=$(eval echo ${array2[1]})
echo $newerVar
# I guess not, but the _upls function gives us a place to hang
#+ the documentation on.
# This helps when we forget what a # construction like:
#+ $(eval echo ... ) means.
# What if Me isn't set when the protected string is evaluated?
unset Me
newestVar=$(_upls ${array2[1]})
echo $newestVar
# Just gone, no hints, no runs, no errors.
# Why in the world?
# Setting the contents of a string variable containing character
#+ sequences that have a meaning in Bash is a general problem in
#+ script programming.
#
# This problem is now solved in eight lines of code
#+ (and four pages of description).
# Where is all this going?
# Dynamic content Web pages as an array of Bash strings.
# Content set per request by a Bash 'eval' command
#+ on the stored page template.
# Not intended to replace PHP, just an interesting thing to do.
###
# Don't have a webserver application?
# No problem, check the example directory of the Bash source;
#+ there is a Bash script for that also.
# _UnProtect_Literal_String_Test
# # # Remove the above "# " to disable this code. # # #
exit 0
This interesting script helps hunt down spammers.
Example A-28. Spammer Identification
#!/bin/bash
# $Id: is_spammer.bash,v 1.12.2.11 2004/10/01 21:42:33 mszick Exp $
Appendix A. Contributed Scripts 603](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-609-320.jpg)
![Advanced Bash-Scripting Guide
#### Special IFS settings used for string parsing. ####
# Whitespace == :Space:Tab:Line Feed:Carriage Return:
WSP_IFS=$'x20'$'x09'$'x0A'$'x0D'
# No Whitespace == Line Feed:Carriage Return
NO_WSP=$'x0A'$'x0D'
# Field separator for dotted decimal IP addresses
ADR_IFS=${NO_WSP}'.'
# Array to dotted string conversions
DOT_IFS='.'${WSP_IFS}
# # # Pending operations stack machine # # #
# This set of functions described in func_stack.bash.
# (See "Additional documentation" above.)
# # #
# Global stack of pending operations.
declare -f -a _pending_
# Global sentinel for stack runners
declare -i _p_ctrl_
# Global holder for currently executing function
declare -f _pend_current_
# # # Debug version only - remove for regular use # # #
#
# The function stored in _pend_hook_ is called
# immediately before each pending function is
# evaluated. Stack clean, _pend_current_ set.
#
# This thingy demonstrated in pend_hook.bash.
declare -f _pend_hook_
# # #
# The do nothing function
pend_dummy() { : ; }
# Clear and initialize the function stack.
pend_init() {
unset _pending_[@]
pend_func pend_stop_mark
_pend_hook_='pend_dummy' # Debug only.
}
# Discard the top function on the stack.
pend_pop() {
if [ ${#_pending_[@]} -gt 0 ]
then
local -i _top_
_top_=${#_pending_[@]}-1
unset _pending_[$_top_]
fi
}
# pend_func function_name [$(printf '%qn' arguments)]
pend_func() {
Appendix A. Contributed Scripts 606](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-612-320.jpg)
![Advanced Bash-Scripting Guide
local IFS=${NO_WSP}
set -f
_pending_[${#_pending_[@]}]=$@
set +f
}
# The function which stops the release:
pend_stop_mark() {
_p_ctrl_=0
}
pend_mark() {
pend_func pend_stop_mark
}
# Execute functions until 'pend_stop_mark' . . .
pend_release() {
local -i _top_ # Declare _top_ as integer.
_p_ctrl_=${#_pending_[@]}
while [ ${_p_ctrl_} -gt 0 ]
do
_top_=${#_pending_[@]}-1
_pend_current_=${_pending_[$_top_]}
unset _pending_[$_top_]
$_pend_hook_ # Debug only.
eval $_pend_current_
done
}
# Drop functions until 'pend_stop_mark' . . .
pend_drop() {
local -i _top_
local _pd_ctrl_=${#_pending_[@]}
while [ ${_pd_ctrl_} -gt 0 ]
do
_top_=$_pd_ctrl_-1
if [ "${_pending_[$_top_]}" == 'pend_stop_mark' ]
then
unset _pending_[$_top_]
break
else
unset _pending_[$_top_]
_pd_ctrl_=$_top_
fi
done
if [ ${#_pending_[@]} -eq 0 ]
then
pend_func pend_stop_mark
fi
}
#### Array editors ####
# This function described in edit_exact.bash.
# (See "Additional documentation," above.)
# edit_exact <excludes_array_name> <target_array_name>
edit_exact() {
[ $# -eq 2 ] ||
[ $# -eq 3 ] || return 1
local -a _ee_Excludes
local -a _ee_Target
local _ee_x
Appendix A. Contributed Scripts 607](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-613-320.jpg)
![Advanced Bash-Scripting Guide
local _ee_t
local IFS=${NO_WSP}
set -f
eval _ee_Excludes=( ${$1[@]} )
eval _ee_Target=( ${$2[@]} )
local _ee_len=${#_ee_Target[@]} # Original length.
local _ee_cnt=${#_ee_Excludes[@]} # Exclude list length.
[ ${_ee_len} -ne 0 ] || return 0 # Can't edit zero length.
[ ${_ee_cnt} -ne 0 ] || return 0 # Can't edit zero length.
for (( x = 0; x < ${_ee_cnt} ; x++ ))
do
_ee_x=${_ee_Excludes[$x]}
for (( n = 0 ; n < ${_ee_len} ; n++ ))
do
_ee_t=${_ee_Target[$n]}
if [ x"${_ee_t}" == x"${_ee_x}" ]
then
unset _ee_Target[$n] # Discard match.
[ $# -eq 2 ] && break # If 2 arguments, then done.
fi
done
done
eval $2=( ${_ee_Target[@]} )
set +f
return 0
}
# This function described in edit_by_glob.bash.
# edit_by_glob <excludes_array_name> <target_array_name>
edit_by_glob() {
[ $# -eq 2 ] ||
[ $# -eq 3 ] || return 1
local -a _ebg_Excludes
local -a _ebg_Target
local _ebg_x
local _ebg_t
local IFS=${NO_WSP}
set -f
eval _ebg_Excludes=( ${$1[@]} )
eval _ebg_Target=( ${$2[@]} )
local _ebg_len=${#_ebg_Target[@]}
local _ebg_cnt=${#_ebg_Excludes[@]}
[ ${_ebg_len} -ne 0 ] || return 0
[ ${_ebg_cnt} -ne 0 ] || return 0
for (( x = 0; x < ${_ebg_cnt} ; x++ ))
do
_ebg_x=${_ebg_Excludes[$x]}
for (( n = 0 ; n < ${_ebg_len} ; n++ ))
do
[ $# -eq 3 ] && _ebg_x=${_ebg_x}'*' # Do prefix edit
if [ ${_ebg_Target[$n]:=} ] #+ if defined & set.
then
_ebg_t=${_ebg_Target[$n]/#${_ebg_x}/}
[ ${#_ebg_t} -eq 0 ] && unset _ebg_Target[$n]
fi
done
done
eval $2=( ${_ebg_Target[@]} )
set +f
return 0
}
Appendix A. Contributed Scripts 608](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-614-320.jpg)
![Advanced Bash-Scripting Guide
# This function described in unique_lines.bash.
# unique_lines <in_name> <out_name>
unique_lines() {
[ $# -eq 2 ] || return 1
local -a _ul_in
local -a _ul_out
local -i _ul_cnt
local -i _ul_pos
local _ul_tmp
local IFS=${NO_WSP}
set -f
eval _ul_in=( ${$1[@]} )
_ul_cnt=${#_ul_in[@]}
for (( _ul_pos = 0 ; _ul_pos < ${_ul_cnt} ; _ul_pos++ ))
do
if [ ${_ul_in[${_ul_pos}]:=} ] # If defined & not empty
then
_ul_tmp=${_ul_in[${_ul_pos}]}
_ul_out[${#_ul_out[@]}]=${_ul_tmp}
for (( zap = _ul_pos ; zap < ${_ul_cnt} ; zap++ ))
do
[ ${_ul_in[${zap}]:=} ] &&
[ 'x'${_ul_in[${zap}]} == 'x'${_ul_tmp} ] &&
unset _ul_in[${zap}]
done
fi
done
eval $2=( ${_ul_out[@]} )
set +f
return 0
}
# This function described in char_convert.bash.
# to_lower <string>
to_lower() {
[ $# -eq 1 ] || return 1
local _tl_out
_tl_out=${1//A/a}
_tl_out=${_tl_out//B/b}
_tl_out=${_tl_out//C/c}
_tl_out=${_tl_out//D/d}
_tl_out=${_tl_out//E/e}
_tl_out=${_tl_out//F/f}
_tl_out=${_tl_out//G/g}
_tl_out=${_tl_out//H/h}
_tl_out=${_tl_out//I/i}
_tl_out=${_tl_out//J/j}
_tl_out=${_tl_out//K/k}
_tl_out=${_tl_out//L/l}
_tl_out=${_tl_out//M/m}
_tl_out=${_tl_out//N/n}
_tl_out=${_tl_out//O/o}
_tl_out=${_tl_out//P/p}
_tl_out=${_tl_out//Q/q}
_tl_out=${_tl_out//R/r}
_tl_out=${_tl_out//S/s}
_tl_out=${_tl_out//T/t}
_tl_out=${_tl_out//U/u}
_tl_out=${_tl_out//V/v}
_tl_out=${_tl_out//W/w}
_tl_out=${_tl_out//X/x}
_tl_out=${_tl_out//Y/y}
Appendix A. Contributed Scripts 609](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-615-320.jpg)
![Advanced Bash-Scripting Guide
_tl_out=${_tl_out//Z/z}
echo ${_tl_out}
return 0
}
#### Application helper functions ####
# Not everybody uses dots as separators (APNIC, for example).
# This function described in to_dot.bash
# to_dot <string>
to_dot() {
[ $# -eq 1 ] || return 1
echo ${1//[#|@|%]/.}
return 0
}
# This function described in is_number.bash.
# is_number <input>
is_number() {
[ "$#" -eq 1 ] || return 1 # is blank?
[ x"$1" == 'x0' ] && return 0 # is zero?
local -i tst
let tst=$1 2>/dev/null # else is numeric!
return $?
}
# This function described in is_address.bash.
# is_address <input>
is_address() {
[ $# -eq 1 ] || return 1 # Blank ==> false
local -a _ia_input
local IFS=${ADR_IFS}
_ia_input=( $1 )
if [ ${#_ia_input[@]} -eq 4 ] &&
is_number ${_ia_input[0]} &&
is_number ${_ia_input[1]} &&
is_number ${_ia_input[2]} &&
is_number ${_ia_input[3]} &&
[ ${_ia_input[0]} -lt 256 ] &&
[ ${_ia_input[1]} -lt 256 ] &&
[ ${_ia_input[2]} -lt 256 ] &&
[ ${_ia_input[3]} -lt 256 ]
then
return 0
else
return 1
fi
}
# This function described in split_ip.bash.
# split_ip <IP_address>
#+ <array_name_norm> [<array_name_rev>]
split_ip() {
[ $# -eq 3 ] || # Either three
[ $# -eq 2 ] || return 1 #+ or two arguments
local -a _si_input
local IFS=${ADR_IFS}
_si_input=( $1 )
IFS=${WSP_IFS}
eval $2=( ${_si_input[@]} )
if [ $# -eq 3 ]
then
Appendix A. Contributed Scripts 610](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-616-320.jpg)
![Advanced Bash-Scripting Guide
# Build query order array.
local -a _dns_ip
_dns_ip[0]=${_si_input[3]}
_dns_ip[1]=${_si_input[2]}
_dns_ip[2]=${_si_input[1]}
_dns_ip[3]=${_si_input[0]}
eval $3=( ${_dns_ip[@]} )
fi
return 0
}
# This function described in dot_array.bash.
# dot_array <array_name>
dot_array() {
[ $# -eq 1 ] || return 1 # Single argument required.
local -a _da_input
eval _da_input=( ${$1[@]} )
local IFS=${DOT_IFS}
local _da_output=${_da_input[@]}
IFS=${WSP_IFS}
echo ${_da_output}
return 0
}
# This function described in file_to_array.bash
# file_to_array <file_name> <line_array_name>
file_to_array() {
[ $# -eq 2 ] || return 1 # Two arguments required.
local IFS=${NO_WSP}
local -a _fta_tmp_
_fta_tmp_=( $(cat $1) )
eval $2=( ${_fta_tmp_[@]} )
return 0
}
# Columnized print of an array of multi-field strings.
# col_print <array_name> <min_space> <
#+ tab_stop [tab_stops]>
col_print() {
[ $# -gt 2 ] || return 0
local -a _cp_inp
local -a _cp_spc
local -a _cp_line
local _cp_min
local _cp_mcnt
local _cp_pos
local _cp_cnt
local _cp_tab
local -i _cp
local -i _cpf
local _cp_fld
# WARNING: FOLLOWING LINE NOT BLANK -- IT IS QUOTED SPACES.
local _cp_max=' '
set -f
local IFS=${NO_WSP}
eval _cp_inp=( ${$1[@]} )
[ ${#_cp_inp[@]} -gt 0 ] || return 0 # Empty is easy.
_cp_mcnt=$2
_cp_min=${_cp_max:1:${_cp_mcnt}}
shift
shift
_cp_cnt=$#
Appendix A. Contributed Scripts 611](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-617-320.jpg)
![Advanced Bash-Scripting Guide
for (( _cp = 0 ; _cp < _cp_cnt ; _cp++ ))
do
_cp_spc[${#_cp_spc[@]}]="${_cp_max:2:$1}" #"
shift
done
_cp_cnt=${#_cp_inp[@]}
for (( _cp = 0 ; _cp < _cp_cnt ; _cp++ ))
do
_cp_pos=1
IFS=${NO_WSP}$'x20'
_cp_line=( ${_cp_inp[${_cp}]} )
IFS=${NO_WSP}
for (( _cpf = 0 ; _cpf < ${#_cp_line[@]} ; _cpf++ ))
do
_cp_tab=${_cp_spc[${_cpf}]:${_cp_pos}}
if [ ${#_cp_tab} -lt ${_cp_mcnt} ]
then
_cp_tab="${_cp_min}"
fi
echo -n "${_cp_tab}"
(( _cp_pos = ${_cp_pos} + ${#_cp_tab} ))
_cp_fld="${_cp_line[${_cpf}]}"
echo -n ${_cp_fld}
(( _cp_pos = ${_cp_pos} + ${#_cp_fld} ))
done
echo
done
set +f
return 0
}
# # # # 'Hunt the Spammer' data flow # # # #
# Application return code
declare -i _hs_RC
# Original input, from which IP addresses are removed
# After which, domain names to check
declare -a uc_name
# Original input IP addresses are moved here
# After which, IP addresses to check
declare -a uc_address
# Names against which address expansion run
# Ready for name detail lookup
declare -a chk_name
# Addresses against which name expansion run
# Ready for address detail lookup
declare -a chk_address
# Recursion is depth-first-by-name.
# The expand_input_address maintains this list
#+ to prohibit looking up addresses twice during
#+ domain name recursion.
declare -a been_there_addr
been_there_addr=( '127.0.0.1' ) # Whitelist localhost
# Names which we have checked (or given up on)
declare -a known_name
Appendix A. Contributed Scripts 612](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-618-320.jpg)
![Advanced Bash-Scripting Guide
# Addresses which we have checked (or given up on)
declare -a known_address
# List of zero or more Blacklist servers to check.
# Each 'known_address' will be checked against each server,
#+ with negative replies and failures suppressed.
declare -a list_server
# Indirection limit - set to zero == no limit
indirect=${SPAMMER_LIMIT:=2}
# # # # 'Hunt the Spammer' information output data # # # #
# Any domain name may have multiple IP addresses.
# Any IP address may have multiple domain names.
# Therefore, track unique address-name pairs.
declare -a known_pair
declare -a reverse_pair
# In addition to the data flow variables; known_address
#+ known_name and list_server, the following are output to the
#+ external graphics interface file.
# Authority chain, parent -> SOA fields.
declare -a auth_chain
# Reference chain, parent name -> child name
declare -a ref_chain
# DNS chain - domain name -> address
declare -a name_address
# Name and service pairs - domain name -> service
declare -a name_srvc
# Name and resource pairs - domain name -> Resource Record
declare -a name_resource
# Parent and Child pairs - parent name -> child name
# This MAY NOT be the same as the ref_chain followed!
declare -a parent_child
# Address and Blacklist hit pairs - address->server
declare -a address_hits
# Dump interface file data
declare -f _dot_dump
_dot_dump=pend_dummy # Initially a no-op
# Data dump is enabled by setting the environment variable SPAMMER_DATA
#+ to the name of a writable file.
declare _dot_file
# Helper function for the dump-to-dot-file function
# dump_to_dot <array_name> <prefix>
dump_to_dot() {
local -a _dda_tmp
local -i _dda_cnt
local _dda_form=' '${2}'%04u %sn'
local IFS=${NO_WSP}
eval _dda_tmp=( ${$1[@]} )
_dda_cnt=${#_dda_tmp[@]}
Appendix A. Contributed Scripts 613](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-619-320.jpg)
![Advanced Bash-Scripting Guide
if [ ${_dda_cnt} -gt 0 ]
then
for (( _dda = 0 ; _dda < _dda_cnt ; _dda++ ))
do
printf "${_dda_form}"
"${_dda}" "${_dda_tmp[${_dda}]}" >>${_dot_file}
done
fi
}
# Which will also set _dot_dump to this function . . .
dump_dot() {
local -i _dd_cnt
echo '# Data vintage: '$(date -R) >${_dot_file}
echo '# ABS Guide: is_spammer.bash; v2, 2004-msz' >>${_dot_file}
echo >>${_dot_file}
echo 'digraph G {' >>${_dot_file}
if [ ${#known_name[@]} -gt 0 ]
then
echo >>${_dot_file}
echo '# Known domain name nodes' >>${_dot_file}
_dd_cnt=${#known_name[@]}
for (( _dd = 0 ; _dd < _dd_cnt ; _dd++ ))
do
printf ' N%04u [label="%s"] ;n'
"${_dd}" "${known_name[${_dd}]}" >>${_dot_file}
done
fi
if [ ${#known_address[@]} -gt 0 ]
then
echo >>${_dot_file}
echo '# Known address nodes' >>${_dot_file}
_dd_cnt=${#known_address[@]}
for (( _dd = 0 ; _dd < _dd_cnt ; _dd++ ))
do
printf ' A%04u [label="%s"] ;n'
"${_dd}" "${known_address[${_dd}]}" >>${_dot_file}
done
fi
echo >>${_dot_file}
echo '/*' >>${_dot_file}
echo ' * Known relationships :: User conversion to' >>${_dot_file}
echo ' * graphic form by hand or program required.' >>${_dot_file}
echo ' *' >>${_dot_file}
if [ ${#auth_chain[@]} -gt 0 ]
then
echo >>${_dot_file}
echo '# Authority ref. edges followed & field source.' >>${_dot_file}
dump_to_dot auth_chain AC
fi
if [ ${#ref_chain[@]} -gt 0 ]
then
echo >>${_dot_file}
echo '# Name ref. edges followed and field source.' >>${_dot_file}
dump_to_dot ref_chain RC
fi
Appendix A. Contributed Scripts 614](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-620-320.jpg)
![Advanced Bash-Scripting Guide
if [ ${#name_address[@]} -gt 0 ]
then
echo >>${_dot_file}
echo '# Known name->address edges' >>${_dot_file}
dump_to_dot name_address NA
fi
if [ ${#name_srvc[@]} -gt 0 ]
then
echo >>${_dot_file}
echo '# Known name->service edges' >>${_dot_file}
dump_to_dot name_srvc NS
fi
if [ ${#name_resource[@]} -gt 0 ]
then
echo >>${_dot_file}
echo '# Known name->resource edges' >>${_dot_file}
dump_to_dot name_resource NR
fi
if [ ${#parent_child[@]} -gt 0 ]
then
echo >>${_dot_file}
echo '# Known parent->child edges' >>${_dot_file}
dump_to_dot parent_child PC
fi
if [ ${#list_server[@]} -gt 0 ]
then
echo >>${_dot_file}
echo '# Known Blacklist nodes' >>${_dot_file}
_dd_cnt=${#list_server[@]}
for (( _dd = 0 ; _dd < _dd_cnt ; _dd++ ))
do
printf ' LS%04u [label="%s"] ;n'
"${_dd}" "${list_server[${_dd}]}" >>${_dot_file}
done
fi
unique_lines address_hits address_hits
if [ ${#address_hits[@]} -gt 0 ]
then
echo >>${_dot_file}
echo '# Known address->Blacklist_hit edges' >>${_dot_file}
echo '# CAUTION: dig warnings can trigger false hits.' >>${_dot_file}
dump_to_dot address_hits AH
fi
echo >>${_dot_file}
echo ' *' >>${_dot_file}
echo ' * That is a lot of relationships. Happy graphing.' >>${_dot_file}
echo ' */' >>${_dot_file}
echo '}' >>${_dot_file}
return 0
}
# # # # 'Hunt the Spammer' execution flow # # # #
# Execution trace is enabled by setting the
#+ environment variable SPAMMER_TRACE to the name of a writable file.
declare -a _trace_log
declare _log_file
Appendix A. Contributed Scripts 615](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-621-320.jpg)
![Advanced Bash-Scripting Guide
# Function to fill the trace log
trace_logger() {
_trace_log[${#_trace_log[@]}]=${_pend_current_}
}
# Dump trace log to file function variable.
declare -f _log_dump
_log_dump=pend_dummy # Initially a no-op.
# Dump the trace log to a file.
dump_log() {
local -i _dl_cnt
_dl_cnt=${#_trace_log[@]}
for (( _dl = 0 ; _dl < _dl_cnt ; _dl++ ))
do
echo ${_trace_log[${_dl}]} >> ${_log_file}
done
_dl_cnt=${#_pending_[@]}
if [ ${_dl_cnt} -gt 0 ]
then
_dl_cnt=${_dl_cnt}-1
echo '# # # Operations stack not empty # # #' >> ${_log_file}
for (( _dl = ${_dl_cnt} ; _dl >= 0 ; _dl-- ))
do
echo ${_pending_[${_dl}]} >> ${_log_file}
done
fi
}
# # # Utility program 'dig' wrappers # # #
#
# These wrappers are derived from the
#+ examples shown in dig_wrappers.bash.
#
# The major difference is these return
#+ their results as a list in an array.
#
# See dig_wrappers.bash for details and
#+ use that script to develop any changes.
#
# # #
# Short form answer: 'dig' parses answer.
# Forward lookup :: Name -> Address
# short_fwd <domain_name> <array_name>
short_fwd() {
local -a _sf_reply
local -i _sf_rc
local -i _sf_cnt
IFS=${NO_WSP}
echo -n '.'
# echo 'sfwd: '${1}
_sf_reply=( $(dig +short ${1} -c in -t a 2>/dev/null) )
_sf_rc=$?
if [ ${_sf_rc} -ne 0 ]
then
_trace_log[${#_trace_log[@]}]='## Lookup error '${_sf_rc}' on '${1}' ##'
# [ ${_sf_rc} -ne 9 ] && pend_drop
return ${_sf_rc}
else
Appendix A. Contributed Scripts 616](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-622-320.jpg)
![Advanced Bash-Scripting Guide
# Some versions of 'dig' return warnings on stdout.
_sf_cnt=${#_sf_reply[@]}
for (( _sf = 0 ; _sf < ${_sf_cnt} ; _sf++ ))
do
[ 'x'${_sf_reply[${_sf}]:0:2} == 'x;;' ] &&
unset _sf_reply[${_sf}]
done
eval $2=( ${_sf_reply[@]} )
fi
return 0
}
# Reverse lookup :: Address -> Name
# short_rev <ip_address> <array_name>
short_rev() {
local -a _sr_reply
local -i _sr_rc
local -i _sr_cnt
IFS=${NO_WSP}
echo -n '.'
# echo 'srev: '${1}
_sr_reply=( $(dig +short -x ${1} 2>/dev/null) )
_sr_rc=$?
if [ ${_sr_rc} -ne 0 ]
then
_trace_log[${#_trace_log[@]}]='## Lookup error '${_sr_rc}' on '${1}' ##'
# [ ${_sr_rc} -ne 9 ] && pend_drop
return ${_sr_rc}
else
# Some versions of 'dig' return warnings on stdout.
_sr_cnt=${#_sr_reply[@]}
for (( _sr = 0 ; _sr < ${_sr_cnt} ; _sr++ ))
do
[ 'x'${_sr_reply[${_sr}]:0:2} == 'x;;' ] &&
unset _sr_reply[${_sr}]
done
eval $2=( ${_sr_reply[@]} )
fi
return 0
}
# Special format lookup used to query blacklist servers.
# short_text <ip_address> <array_name>
short_text() {
local -a _st_reply
local -i _st_rc
local -i _st_cnt
IFS=${NO_WSP}
# echo 'stxt: '${1}
_st_reply=( $(dig +short ${1} -c in -t txt 2>/dev/null) )
_st_rc=$?
if [ ${_st_rc} -ne 0 ]
then
_trace_log[${#_trace_log[@]}]='##Text lookup error '${_st_rc}' on '${1}'##'
# [ ${_st_rc} -ne 9 ] && pend_drop
return ${_st_rc}
else
# Some versions of 'dig' return warnings on stdout.
_st_cnt=${#_st_reply[@]}
for (( _st = 0 ; _st < ${#_st_cnt} ; _st++ ))
do
[ 'x'${_st_reply[${_st}]:0:2} == 'x;;' ] &&
Appendix A. Contributed Scripts 617](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-623-320.jpg)
![Advanced Bash-Scripting Guide
unset _st_reply[${_st}]
done
eval $2=( ${_st_reply[@]} )
fi
return 0
}
# The long forms, a.k.a., the parse it yourself versions
# RFC 2782 Service lookups
# dig +noall +nofail +answer _ldap._tcp.openldap.org -t srv
# _<service>._<protocol>.<domain_name>
# _ldap._tcp.openldap.org. 3600 IN SRV 0 0 389 ldap.openldap.org.
# domain TTL Class SRV Priority Weight Port Target
# Forward lookup :: Name -> poor man's zone transfer
# long_fwd <domain_name> <array_name>
long_fwd() {
local -a _lf_reply
local -i _lf_rc
local -i _lf_cnt
IFS=${NO_WSP}
echo -n ':'
# echo 'lfwd: '${1}
_lf_reply=( $(
dig +noall +nofail +answer +authority +additional
${1} -t soa ${1} -t mx ${1} -t any 2>/dev/null) )
_lf_rc=$?
if [ ${_lf_rc} -ne 0 ]
then
_trace_log[${#_trace_log[@]}]='# Zone lookup err '${_lf_rc}' on '${1}' #'
# [ ${_lf_rc} -ne 9 ] && pend_drop
return ${_lf_rc}
else
# Some versions of 'dig' return warnings on stdout.
_lf_cnt=${#_lf_reply[@]}
for (( _lf = 0 ; _lf < ${_lf_cnt} ; _lf++ ))
do
[ 'x'${_lf_reply[${_lf}]:0:2} == 'x;;' ] &&
unset _lf_reply[${_lf}]
done
eval $2=( ${_lf_reply[@]} )
fi
return 0
}
# The reverse lookup domain name corresponding to the IPv6 address:
# 4321:0:1:2:3:4:567:89ab
# would be (nibble, I.E: Hexdigit) reversed:
# b.a.9.8.7.6.5.0.4.0.0.0.3.0.0.0.2.0.0.0.1.0.0.0.0.0.0.0.1.2.3.4.IP6.ARPA.
# Reverse lookup :: Address -> poor man's delegation chain
# long_rev <rev_ip_address> <array_name>
long_rev() {
local -a _lr_reply
local -i _lr_rc
local -i _lr_cnt
local _lr_dns
_lr_dns=${1}'.in-addr.arpa.'
IFS=${NO_WSP}
echo -n ':'
# echo 'lrev: '${1}
_lr_reply=( $(
Appendix A. Contributed Scripts 618](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-624-320.jpg)
![Advanced Bash-Scripting Guide
dig +noall +nofail +answer +authority +additional
${_lr_dns} -t soa ${_lr_dns} -t any 2>/dev/null) )
_lr_rc=$?
if [ ${_lr_rc} -ne 0 ]
then
_trace_log[${#_trace_log[@]}]='# Deleg lkp error '${_lr_rc}' on '${1}' #'
# [ ${_lr_rc} -ne 9 ] && pend_drop
return ${_lr_rc}
else
# Some versions of 'dig' return warnings on stdout.
_lr_cnt=${#_lr_reply[@]}
for (( _lr = 0 ; _lr < ${_lr_cnt} ; _lr++ ))
do
[ 'x'${_lr_reply[${_lr}]:0:2} == 'x;;' ] &&
unset _lr_reply[${_lr}]
done
eval $2=( ${_lr_reply[@]} )
fi
return 0
}
# # # Application specific functions # # #
# Mung a possible name; suppresses root and TLDs.
# name_fixup <string>
name_fixup(){
local -a _nf_tmp
local -i _nf_end
local _nf_str
local IFS
_nf_str=$(to_lower ${1})
_nf_str=$(to_dot ${_nf_str})
_nf_end=${#_nf_str}-1
[ ${_nf_str:${_nf_end}} != '.' ] &&
_nf_str=${_nf_str}'.'
IFS=${ADR_IFS}
_nf_tmp=( ${_nf_str} )
IFS=${WSP_IFS}
_nf_end=${#_nf_tmp[@]}
case ${_nf_end} in
0) # No dots, only dots.
echo
return 1
;;
1) # Only a TLD.
echo
return 1
;;
2) # Maybe okay.
echo ${_nf_str}
return 0
# Needs a lookup table?
if [ ${#_nf_tmp[1]} -eq 2 ]
then # Country coded TLD.
echo
return 1
else
echo ${_nf_str}
return 0
fi
;;
esac
Appendix A. Contributed Scripts 619](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-625-320.jpg)
![Advanced Bash-Scripting Guide
echo ${_nf_str}
return 0
}
# Grope and mung original input(s).
split_input() {
[ ${#uc_name[@]} -gt 0 ] || return 0
local -i _si_cnt
local -i _si_len
local _si_str
unique_lines uc_name uc_name
_si_cnt=${#uc_name[@]}
for (( _si = 0 ; _si < _si_cnt ; _si++ ))
do
_si_str=${uc_name[$_si]}
if is_address ${_si_str}
then
uc_address[${#uc_address[@]}]=${_si_str}
unset uc_name[$_si]
else
if ! uc_name[$_si]=$(name_fixup ${_si_str})
then
unset ucname[$_si]
fi
fi
done
uc_name=( ${uc_name[@]} )
_si_cnt=${#uc_name[@]}
_trace_log[${#_trace_log[@]}]='#Input '${_si_cnt}' unchkd name input(s).#'
_si_cnt=${#uc_address[@]}
_trace_log[${#_trace_log[@]}]='#Input '${_si_cnt}' unchkd addr input(s).#'
return 0
}
# # # Discovery functions -- recursively interlocked by external data # # #
# # # The leading 'if list is empty; return 0' in each is required. # # #
# Recursion limiter
# limit_chk() <next_level>
limit_chk() {
local -i _lc_lmt
# Check indirection limit.
if [ ${indirect} -eq 0 ] || [ $# -eq 0 ]
then
# The 'do-forever' choice
echo 1 # Any value will do.
return 0 # OK to continue.
else
# Limiting is in effect.
if [ ${indirect} -lt ${1} ]
then
echo ${1} # Whatever.
return 1 # Stop here.
else
_lc_lmt=${1}+1 # Bump the given limit.
echo ${_lc_lmt} # Echo it.
return 0 # OK to continue.
fi
fi
}
# For each name in uc_name:
Appendix A. Contributed Scripts 620](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-626-320.jpg)
![Advanced Bash-Scripting Guide
# Move name to chk_name.
# Add addresses to uc_address.
# Pend expand_input_address.
# Repeat until nothing new found.
# expand_input_name <indirection_limit>
expand_input_name() {
[ ${#uc_name[@]} -gt 0 ] || return 0
local -a _ein_addr
local -a _ein_new
local -i _ucn_cnt
local -i _ein_cnt
local _ein_tst
_ucn_cnt=${#uc_name[@]}
if ! _ein_cnt=$(limit_chk ${1})
then
return 0
fi
for (( _ein = 0 ; _ein < _ucn_cnt ; _ein++ ))
do
if short_fwd ${uc_name[${_ein}]} _ein_new
then
for (( _ein_cnt = 0 ; _ein_cnt < ${#_ein_new[@]}; _ein_cnt++ ))
do
_ein_tst=${_ein_new[${_ein_cnt}]}
if is_address ${_ein_tst}
then
_ein_addr[${#_ein_addr[@]}]=${_ein_tst}
fi
done
fi
done
unique_lines _ein_addr _ein_addr # Scrub duplicates.
edit_exact chk_address _ein_addr # Scrub pending detail.
edit_exact known_address _ein_addr # Scrub already detailed.
if [ ${#_ein_addr[@]} -gt 0 ] # Anything new?
then
uc_address=( ${uc_address[@]} ${_ein_addr[@]} )
pend_func expand_input_address ${1}
_trace_log[${#_trace_log[@]}]='#Add '${#_ein_addr[@]}' unchkd addr inp.#'
fi
edit_exact chk_name uc_name # Scrub pending detail.
edit_exact known_name uc_name # Scrub already detailed.
if [ ${#uc_name[@]} -gt 0 ]
then
chk_name=( ${chk_name[@]} ${uc_name[@]} )
pend_func detail_each_name ${1}
fi
unset uc_name[@]
return 0
}
# For each address in uc_address:
# Move address to chk_address.
# Add names to uc_name.
# Pend expand_input_name.
# Repeat until nothing new found.
# expand_input_address <indirection_limit>
expand_input_address() {
[ ${#uc_address[@]} -gt 0 ] || return 0
local -a _eia_addr
Appendix A. Contributed Scripts 621](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-627-320.jpg)
![Advanced Bash-Scripting Guide
local -a _eia_name
local -a _eia_new
local -i _uca_cnt
local -i _eia_cnt
local _eia_tst
unique_lines uc_address _eia_addr
unset uc_address[@]
edit_exact been_there_addr _eia_addr
_uca_cnt=${#_eia_addr[@]}
[ ${_uca_cnt} -gt 0 ] &&
been_there_addr=( ${been_there_addr[@]} ${_eia_addr[@]} )
for (( _eia = 0 ; _eia < _uca_cnt ; _eia++ ))
do
if short_rev ${_eia_addr[${_eia}]} _eia_new
then
for (( _eia_cnt = 0 ; _eia_cnt < ${#_eia_new[@]} ; _eia_cnt++ ))
do
_eia_tst=${_eia_new[${_eia_cnt}]}
if _eia_tst=$(name_fixup ${_eia_tst})
then
_eia_name[${#_eia_name[@]}]=${_eia_tst}
fi
done
fi
done
unique_lines _eia_name _eia_name # Scrub duplicates.
edit_exact chk_name _eia_name # Scrub pending detail.
edit_exact known_name _eia_name # Scrub already detailed.
if [ ${#_eia_name[@]} -gt 0 ] # Anything new?
then
uc_name=( ${uc_name[@]} ${_eia_name[@]} )
pend_func expand_input_name ${1}
_trace_log[${#_trace_log[@]}]='#Add '${#_eia_name[@]}' unchkd name inp.#'
fi
edit_exact chk_address _eia_addr # Scrub pending detail.
edit_exact known_address _eia_addr # Scrub already detailed.
if [ ${#_eia_addr[@]} -gt 0 ] # Anything new?
then
chk_address=( ${chk_address[@]} ${_eia_addr[@]} )
pend_func detail_each_address ${1}
fi
return 0
}
# The parse-it-yourself zone reply.
# The input is the chk_name list.
# detail_each_name <indirection_limit>
detail_each_name() {
[ ${#chk_name[@]} -gt 0 ] || return 0
local -a _den_chk # Names to check
local -a _den_name # Names found here
local -a _den_address # Addresses found here
local -a _den_pair # Pairs found here
local -a _den_rev # Reverse pairs found here
local -a _den_tmp # Line being parsed
local -a _den_auth # SOA contact being parsed
local -a _den_new # The zone reply
local -a _den_pc # Parent-Child gets big fast
local -a _den_ref # So does reference chain
local -a _den_nr # Name-Resource can be big
local -a _den_na # Name-Address
Appendix A. Contributed Scripts 622](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-628-320.jpg)
![Advanced Bash-Scripting Guide
local -a _den_ns # Name-Service
local -a _den_achn # Chain of Authority
local -i _den_cnt # Count of names to detail
local -i _den_lmt # Indirection limit
local _den_who # Named being processed
local _den_rec # Record type being processed
local _den_cont # Contact domain
local _den_str # Fixed up name string
local _den_str2 # Fixed up reverse
local IFS=${WSP_IFS}
# Local, unique copy of names to check
unique_lines chk_name _den_chk
unset chk_name[@] # Done with globals.
# Less any names already known
edit_exact known_name _den_chk
_den_cnt=${#_den_chk[@]}
# If anything left, add to known_name.
[ ${_den_cnt} -gt 0 ] &&
known_name=( ${known_name[@]} ${_den_chk[@]} )
# for the list of (previously) unknown names . . .
for (( _den = 0 ; _den < _den_cnt ; _den++ ))
do
_den_who=${_den_chk[${_den}]}
if long_fwd ${_den_who} _den_new
then
unique_lines _den_new _den_new
if [ ${#_den_new[@]} -eq 0 ]
then
_den_pair[${#_den_pair[@]}]='0.0.0.0 '${_den_who}
fi
# Parse each line in the reply.
for (( _line = 0 ; _line < ${#_den_new[@]} ; _line++ ))
do
IFS=${NO_WSP}$'x09'$'x20'
_den_tmp=( ${_den_new[${_line}]} )
IFS=${WSP_IFS}
# If usable record and not a warning message . . .
if [ ${#_den_tmp[@]} -gt 4 ] && [ 'x'${_den_tmp[0]} != 'x;;' ]
then
_den_rec=${_den_tmp[3]}
_den_nr[${#_den_nr[@]}]=${_den_who}' '${_den_rec}
# Begin at RFC1033 (+++)
case ${_den_rec} in
#<name> [<ttl>] [<class>] SOA <origin> <person>
SOA) # Start Of Authority
if _den_str=$(name_fixup ${_den_tmp[0]})
then
_den_name[${#_den_name[@]}]=${_den_str}
_den_achn[${#_den_achn[@]}]=${_den_who}' '${_den_str}' SOA'
# SOA origin -- domain name of master zone record
if _den_str2=$(name_fixup ${_den_tmp[4]})
then
_den_name[${#_den_name[@]}]=${_den_str2}
_den_achn[${#_den_achn[@]}]=${_den_who}' '${_den_str2}' SOA.O'
fi
# Responsible party e-mail address (possibly bogus).
Appendix A. Contributed Scripts 623](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-629-320.jpg)
![Advanced Bash-Scripting Guide
# Possibility of first.last@domain.name ignored.
set -f
if _den_str2=$(name_fixup ${_den_tmp[5]})
then
IFS=${ADR_IFS}
_den_auth=( ${_den_str2} )
IFS=${WSP_IFS}
if [ ${#_den_auth[@]} -gt 2 ]
then
_den_cont=${_den_auth[1]}
for (( _auth = 2 ; _auth < ${#_den_auth[@]} ; _auth++ ))
do
_den_cont=${_den_cont}'.'${_den_auth[${_auth}]}
done
_den_name[${#_den_name[@]}]=${_den_cont}'.'
_den_achn[${#_den_achn[@]}]=${_den_who}' '${_den_cont}'. SOA.C'
fi
fi
set +f
fi
;;
A) # IP(v4) Address Record
if _den_str=$(name_fixup ${_den_tmp[0]})
then
_den_name[${#_den_name[@]}]=${_den_str}
_den_pair[${#_den_pair[@]}]=${_den_tmp[4]}' '${_den_str}
_den_na[${#_den_na[@]}]=${_den_str}' '${_den_tmp[4]}
_den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' A'
else
_den_pair[${#_den_pair[@]}]=${_den_tmp[4]}' unknown.domain'
_den_na[${#_den_na[@]}]='unknown.domain '${_den_tmp[4]}
_den_ref[${#_den_ref[@]}]=${_den_who}' unknown.domain A'
fi
_den_address[${#_den_address[@]}]=${_den_tmp[4]}
_den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_tmp[4]}
;;
NS) # Name Server Record
# Domain name being serviced (may be other than current)
if _den_str=$(name_fixup ${_den_tmp[0]})
then
_den_name[${#_den_name[@]}]=${_den_str}
_den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' NS'
# Domain name of service provider
if _den_str2=$(name_fixup ${_den_tmp[4]})
then
_den_name[${#_den_name[@]}]=${_den_str2}
_den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str2}' NSH'
_den_ns[${#_den_ns[@]}]=${_den_str2}' NS'
_den_pc[${#_den_pc[@]}]=${_den_str}' '${_den_str2}
fi
fi
;;
MX) # Mail Server Record
# Domain name being serviced (wildcards not handled here)
if _den_str=$(name_fixup ${_den_tmp[0]})
then
_den_name[${#_den_name[@]}]=${_den_str}
Appendix A. Contributed Scripts 624](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-630-320.jpg)
![Advanced Bash-Scripting Guide
_den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' MX'
fi
# Domain name of service provider
if _den_str=$(name_fixup ${_den_tmp[5]})
then
_den_name[${#_den_name[@]}]=${_den_str}
_den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' MXH'
_den_ns[${#_den_ns[@]}]=${_den_str}' MX'
_den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_str}
fi
;;
PTR) # Reverse address record
# Special name
if _den_str=$(name_fixup ${_den_tmp[0]})
then
_den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' PTR'
# Host name (not a CNAME)
if _den_str2=$(name_fixup ${_den_tmp[4]})
then
_den_rev[${#_den_rev[@]}]=${_den_str}' '${_den_str2}
_den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str2}' PTRH'
_den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_str}
fi
fi
;;
AAAA) # IP(v6) Address Record
if _den_str=$(name_fixup ${_den_tmp[0]})
then
_den_name[${#_den_name[@]}]=${_den_str}
_den_pair[${#_den_pair[@]}]=${_den_tmp[4]}' '${_den_str}
_den_na[${#_den_na[@]}]=${_den_str}' '${_den_tmp[4]}
_den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' AAAA'
else
_den_pair[${#_den_pair[@]}]=${_den_tmp[4]}' unknown.domain'
_den_na[${#_den_na[@]}]='unknown.domain '${_den_tmp[4]}
_den_ref[${#_den_ref[@]}]=${_den_who}' unknown.domain'
fi
# No processing for IPv6 addresses
_den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_tmp[4]}
;;
CNAME) # Alias name record
# Nickname
if _den_str=$(name_fixup ${_den_tmp[0]})
then
_den_name[${#_den_name[@]}]=${_den_str}
_den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' CNAME'
_den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_str}
fi
# Hostname
if _den_str=$(name_fixup ${_den_tmp[4]})
then
_den_name[${#_den_name[@]}]=${_den_str}
_den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' CHOST'
_den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_str}
fi
;;
# TXT)
# ;;
esac
Appendix A. Contributed Scripts 625](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-631-320.jpg)
![Advanced Bash-Scripting Guide
fi
done
else # Lookup error == 'A' record 'unknown address'
_den_pair[${#_den_pair[@]}]='0.0.0.0 '${_den_who}
fi
done
# Control dot array growth.
unique_lines _den_achn _den_achn # Works best, all the same.
edit_exact auth_chain _den_achn # Works best, unique items.
if [ ${#_den_achn[@]} -gt 0 ]
then
IFS=${NO_WSP}
auth_chain=( ${auth_chain[@]} ${_den_achn[@]} )
IFS=${WSP_IFS}
fi
unique_lines _den_ref _den_ref # Works best, all the same.
edit_exact ref_chain _den_ref # Works best, unique items.
if [ ${#_den_ref[@]} -gt 0 ]
then
IFS=${NO_WSP}
ref_chain=( ${ref_chain[@]} ${_den_ref[@]} )
IFS=${WSP_IFS}
fi
unique_lines _den_na _den_na
edit_exact name_address _den_na
if [ ${#_den_na[@]} -gt 0 ]
then
IFS=${NO_WSP}
name_address=( ${name_address[@]} ${_den_na[@]} )
IFS=${WSP_IFS}
fi
unique_lines _den_ns _den_ns
edit_exact name_srvc _den_ns
if [ ${#_den_ns[@]} -gt 0 ]
then
IFS=${NO_WSP}
name_srvc=( ${name_srvc[@]} ${_den_ns[@]} )
IFS=${WSP_IFS}
fi
unique_lines _den_nr _den_nr
edit_exact name_resource _den_nr
if [ ${#_den_nr[@]} -gt 0 ]
then
IFS=${NO_WSP}
name_resource=( ${name_resource[@]} ${_den_nr[@]} )
IFS=${WSP_IFS}
fi
unique_lines _den_pc _den_pc
edit_exact parent_child _den_pc
if [ ${#_den_pc[@]} -gt 0 ]
then
IFS=${NO_WSP}
parent_child=( ${parent_child[@]} ${_den_pc[@]} )
IFS=${WSP_IFS}
fi
Appendix A. Contributed Scripts 626](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-632-320.jpg)
![Advanced Bash-Scripting Guide
# Update list known_pair (Address and Name).
unique_lines _den_pair _den_pair
edit_exact known_pair _den_pair
if [ ${#_den_pair[@]} -gt 0 ] # Anything new?
then
IFS=${NO_WSP}
known_pair=( ${known_pair[@]} ${_den_pair[@]} )
IFS=${WSP_IFS}
fi
# Update list of reverse pairs.
unique_lines _den_rev _den_rev
edit_exact reverse_pair _den_rev
if [ ${#_den_rev[@]} -gt 0 ] # Anything new?
then
IFS=${NO_WSP}
reverse_pair=( ${reverse_pair[@]} ${_den_rev[@]} )
IFS=${WSP_IFS}
fi
# Check indirection limit -- give up if reached.
if ! _den_lmt=$(limit_chk ${1})
then
return 0
fi
# Execution engine is LIFO. Order of pend operations is important.
# Did we define any new addresses?
unique_lines _den_address _den_address # Scrub duplicates.
edit_exact known_address _den_address # Scrub already processed.
edit_exact un_address _den_address # Scrub already waiting.
if [ ${#_den_address[@]} -gt 0 ] # Anything new?
then
uc_address=( ${uc_address[@]} ${_den_address[@]} )
pend_func expand_input_address ${_den_lmt}
_trace_log[${#_trace_log[@]}]='# Add '${#_den_address[@]}' unchkd addr. #'
fi
# Did we find any new names?
unique_lines _den_name _den_name # Scrub duplicates.
edit_exact known_name _den_name # Scrub already processed.
edit_exact uc_name _den_name # Scrub already waiting.
if [ ${#_den_name[@]} -gt 0 ] # Anything new?
then
uc_name=( ${uc_name[@]} ${_den_name[@]} )
pend_func expand_input_name ${_den_lmt}
_trace_log[${#_trace_log[@]}]='#Added '${#_den_name[@]}' unchkd name#'
fi
return 0
}
# The parse-it-yourself delegation reply
# Input is the chk_address list.
# detail_each_address <indirection_limit>
detail_each_address() {
[ ${#chk_address[@]} -gt 0 ] || return 0
unique_lines chk_address chk_address
edit_exact known_address chk_address
if [ ${#chk_address[@]} -gt 0 ]
then
known_address=( ${known_address[@]} ${chk_address[@]} )
unset chk_address[@]
Appendix A. Contributed Scripts 627](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-633-320.jpg)
![Advanced Bash-Scripting Guide
fi
return 0
}
# # # Application specific output functions # # #
# Pretty print the known pairs.
report_pairs() {
echo
echo 'Known network pairs.'
col_print known_pair 2 5 30
if [ ${#auth_chain[@]} -gt 0 ]
then
echo
echo 'Known chain of authority.'
col_print auth_chain 2 5 30 55
fi
if [ ${#reverse_pair[@]} -gt 0 ]
then
echo
echo 'Known reverse pairs.'
col_print reverse_pair 2 5 55
fi
return 0
}
# Check an address against the list of blacklist servers.
# A good place to capture for GraphViz: address->status(server(reports))
# check_lists <ip_address>
check_lists() {
[ $# -eq 1 ] || return 1
local -a _cl_fwd_addr
local -a _cl_rev_addr
local -a _cl_reply
local -i _cl_rc
local -i _ls_cnt
local _cl_dns_addr
local _cl_lkup
split_ip ${1} _cl_fwd_addr _cl_rev_addr
_cl_dns_addr=$(dot_array _cl_rev_addr)'.'
_ls_cnt=${#list_server[@]}
echo ' Checking address '${1}
for (( _cl = 0 ; _cl < _ls_cnt ; _cl++ ))
do
_cl_lkup=${_cl_dns_addr}${list_server[${_cl}]}
if short_text ${_cl_lkup} _cl_reply
then
if [ ${#_cl_reply[@]} -gt 0 ]
then
echo ' Records from '${list_server[${_cl}]}
address_hits[${#address_hits[@]}]=${1}' '${list_server[${_cl}]}
_hs_RC=2
for (( _clr = 0 ; _clr < ${#_cl_reply[@]} ; _clr++ ))
do
echo ' '${_cl_reply[${_clr}]}
done
fi
fi
done
Appendix A. Contributed Scripts 628](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-634-320.jpg)
![Advanced Bash-Scripting Guide
declare -a default_servers
# See: http://www.spamhaus.org (Conservative, well maintained)
default_servers[0]='sbl-xbl.spamhaus.org'
# See: http://ordb.org (Open mail relays)
default_servers[1]='relays.ordb.org'
# See: http://www.spamcop.net/ (You can report spammers here)
default_servers[2]='bl.spamcop.net'
# See: http://www.spews.org (An 'early detect' system)
default_servers[3]='l2.spews.dnsbl.sorbs.net'
# See: http://www.dnsbl.us.sorbs.net/using.shtml
default_servers[4]='dnsbl.sorbs.net'
# See: http://dsbl.org/usage (Various mail relay lists)
default_servers[5]='list.dsbl.org'
default_servers[6]='multihop.dsbl.org'
default_servers[7]='unconfirmed.dsbl.org'
# User input argument #1
setup_input() {
if [ -e ${1} ] && [ -r ${1} ] # Name of readable file
then
file_to_array ${1} uc_name
echo 'Using filename >'${1}'< as input.'
else
if is_address ${1} # IP address?
then
uc_address=( ${1} )
echo 'Starting with address >'${1}'<'
else # Must be a name.
uc_name=( ${1} )
echo 'Starting with domain name >'${1}'<'
fi
fi
return 0
}
# User input argument #2
setup_servers() {
if [ -e ${1} ] && [ -r ${1} ] # Name of a readable file
then
file_to_array ${1} list_server
echo 'Using filename >'${1}'< as blacklist server list.'
else
list_server=( ${1} )
echo 'Using blacklist server >'${1}'<'
fi
return 0
}
# User environment variable SPAMMER_TRACE
live_log_die() {
if [ ${SPAMMER_TRACE:=} ] # Wants trace log?
then
if [ ! -e ${SPAMMER_TRACE} ]
then
if ! touch ${SPAMMER_TRACE} 2>/dev/null
then
pend_func echo $(printf '%qn'
'Unable to create log file >'${SPAMMER_TRACE}'<')
pend_release
exit 1
fi
_log_file=${SPAMMER_TRACE}
Appendix A. Contributed Scripts 630](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-636-320.jpg)
![Advanced Bash-Scripting Guide
_pend_hook_=trace_logger
_log_dump=dump_log
else
if [ ! -w ${SPAMMER_TRACE} ]
then
pend_func echo $(printf '%qn'
'Unable to write log file >'${SPAMMER_TRACE}'<')
pend_release
exit 1
fi
_log_file=${SPAMMER_TRACE}
echo '' > ${_log_file}
_pend_hook_=trace_logger
_log_dump=dump_log
fi
fi
return 0
}
# User environment variable SPAMMER_DATA
data_capture() {
if [ ${SPAMMER_DATA:=} ] # Wants a data dump?
then
if [ ! -e ${SPAMMER_DATA} ]
then
if ! touch ${SPAMMER_DATA} 2>/dev/null
then
pend_func echo $(printf '%q]n'
'Unable to create data output file >'${SPAMMER_DATA}'<')
pend_release
exit 1
fi
_dot_file=${SPAMMER_DATA}
_dot_dump=dump_dot
else
if [ ! -w ${SPAMMER_DATA} ]
then
pend_func echo $(printf '%qn'
'Unable to write data output file >'${SPAMMER_DATA}'<')
pend_release
exit 1
fi
_dot_file=${SPAMMER_DATA}
_dot_dump=dump_dot
fi
fi
return 0
}
# Grope user specified arguments.
do_user_args() {
if [ $# -gt 0 ] && is_number $1
then
indirect=$1
shift
fi
case $# in # Did user treat us well?
1)
if ! setup_input $1 # Needs error checking.
then
pend_release
Appendix A. Contributed Scripts 631](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-637-320.jpg)
![Advanced Bash-Scripting Guide
$_log_dump
exit 1
fi
list_server=( ${default_servers[@]} )
_list_cnt=${#list_server[@]}
echo 'Using default blacklist server list.'
echo 'Search depth limit: '${indirect}
;;
2)
if ! setup_input $1 # Needs error checking.
then
pend_release
$_log_dump
exit 1
fi
if ! setup_servers $2 # Needs error checking.
then
pend_release
$_log_dump
exit 1
fi
echo 'Search depth limit: '${indirect}
;;
*)
pend_func usage
pend_release
$_log_dump
exit 1
;;
esac
return 0
}
# A general purpose debug tool.
# list_array <array_name>
list_array() {
[ $# -eq 1 ] || return 1 # One argument required.
local -a _la_lines
set -f
local IFS=${NO_WSP}
eval _la_lines=( ${$1[@]} )
echo
echo "Element count "${#_la_lines[@]}" array "${1}
local _ln_cnt=${#_la_lines[@]}
for (( _i = 0; _i < ${_ln_cnt}; _i++ ))
do
echo 'Element '$_i' >'${_la_lines[$_i]}'<'
done
set +f
return 0
}
# # # 'Hunt the Spammer' program code # # #
pend_init # Ready stack engine.
pend_func credits # Last thing to print.
# # # Deal with user # # #
live_log_die # Setup debug trace log.
data_capture # Setup data capture file.
echo
Appendix A. Contributed Scripts 632](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-638-320.jpg)
![Advanced Bash-Scripting Guide
do_user_args $@
# # # Haven't exited yet - There is some hope # # #
# Discovery group - Execution engine is LIFO - pend
# in reverse order of execution.
_hs_RC=0 # Hunt the Spammer return code
pend_mark
pend_func report_pairs # Report name-address pairs.
# The two detail_* are mutually recursive functions.
# They also pend expand_* functions as required.
# These two (the last of ???) exit the recursion.
pend_func detail_each_address # Get all resources of addresses.
pend_func detail_each_name # Get all resources of names.
# The two expand_* are mutually recursive functions,
#+ which pend additional detail_* functions as required.
pend_func expand_input_address 1 # Expand input names by address.
pend_func expand_input_name 1 # #xpand input addresses by name.
# Start with a unique set of names and addresses.
pend_func unique_lines uc_address uc_address
pend_func unique_lines uc_name uc_name
# Separate mixed input of names and addresses.
pend_func split_input
pend_release
# # # Pairs reported -- Unique list of IP addresses found
echo
_ip_cnt=${#known_address[@]}
if [ ${#list_server[@]} -eq 0 ]
then
echo 'Blacklist server list empty, none checked.'
else
if [ ${_ip_cnt} -eq 0 ]
then
echo 'Known address list empty, none checked.'
else
_ip_cnt=${_ip_cnt}-1 # Start at top.
echo 'Checking Blacklist servers.'
for (( _ip = _ip_cnt ; _ip >= 0 ; _ip-- ))
do
pend_func check_lists $( printf '%qn' ${known_address[$_ip]} )
done
fi
fi
pend_release
$_dot_dump # Graphics file dump
$_log_dump # Execution trace
echo
##############################
# Example output from script #
##############################
:<<-'_is_spammer_outputs_'
./is_spammer.bash 0 web4.alojamentos7.com
Starting with domain name >web4.alojamentos7.com<
Using default blacklist server list.
Appendix A. Contributed Scripts 633](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-639-320.jpg)
![Advanced Bash-Scripting Guide
Optional Prerequisites
'named,' a local DNS caching program. Any flavor will do.
Do twice: dig $HOSTNAME
Check near bottom of output for: SERVER: 127.0.0.1#53
That means you have one running.
Optional Graphics Support
'date,' a standard *nix thing. (date -R)
dot Program to convert graphic description file to a
diagram. (dot -V)
A part of the Graph-Viz set of programs.
See: [http://www.research.att.com/sw/tools/graphviz||GraphViz]
'dotty,' a visual editor for graphic description files.
Also a part of the Graph-Viz set of programs.
Quick Start
In the same directory as the is_spammer.bash script;
Do: ./is_spammer.bash
Usage Details
1. Blacklist server choices.
(a) To use default, built-in list: Do nothing.
(b) To use your own list:
i. Create a file with a single Blacklist server
domain name per line.
ii. Provide that filename as the last argument to
the script.
(c) To use a single Blacklist server: Last argument
to the script.
(d) To disable Blacklist lookups:
i. Create an empty file (touch spammer.nul)
Your choice of filename.
ii. Provide the filename of that empty file as the
last argument to the script.
2. Search depth limit.
(a) To use the default value of 2: Do nothing.
(b) To set a different limit:
A limit of 0 means: no limit.
i. export SPAMMER_LIMIT=1
Appendix A. Contributed Scripts 635](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-641-320.jpg)
![Advanced Bash-Scripting Guide
(a) Return code 0: All OK
(b) Return code 1: Script setup failure
(c) Return code 2: Something was blacklisted.
9. Where is my graph (diagram)?
The script does not directly produce a graph (diagram).
It only produces a graphic description file. You can
process the graphic descriptor file that was output
with the 'dot' program.
Until you edit that descriptor file, to describe the
relationships you want shown, all that you will get is
a bunch of labeled name and address nodes.
All of the script's discovered relationships are within
a comment block in the graphic descriptor file, each
with a descriptive heading.
The editing required to draw a line between a pair of
nodes from the information in the descriptor file may
be done with a text editor.
Given these lines somewhere in the descriptor file:
# Known domain name nodes
N0000 [label="guardproof.info."] ;
N0002 [label="third.guardproof.info."] ;
# Known address nodes
A0000 [label="61.141.32.197"] ;
/*
# Known name->address edges
NA0000 third.guardproof.info. 61.141.32.197
# Known parent->child edges
PC0000 guardproof.info. third.guardproof.info.
*/
Turn that into the following lines by substituting node
identifiers into the relationships:
# Known domain name nodes
N0000 [label="guardproof.info."] ;
Appendix A. Contributed Scripts 637](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-643-320.jpg)
![Advanced Bash-Scripting Guide
N0002 [label="third.guardproof.info."] ;
# Known address nodes
A0000 [label="61.141.32.197"] ;
# PC0000 guardproof.info. third.guardproof.info.
N0000->N0002 ;
# NA0000 third.guardproof.info. 61.141.32.197
N0002->A0000 ;
/*
# Known name->address edges
NA0000 third.guardproof.info. 61.141.32.197
# Known parent->child edges
PC0000 guardproof.info. third.guardproof.info.
*/
Process that with the 'dot' program, and you have your
first network diagram.
In addition to the conventional graphic edges, the
descriptor file includes similar format pair-data that
describes services, zone records (sub-graphs?),
blacklisted addresses, and other things which might be
interesting to include in your graph. This additional
information could be displayed as different node
shapes, colors, line sizes, etc.
The descriptor file can also be read and edited by a
Bash script (of course). You should be able to find
most of the functions required within the
"is_spammer.bash" script.
# End Quickstart.
Additional Note
========== ====
Michael Zick points out that there is a "makeviz.bash" interactive
Web site at rediris.es. Can't give the full URL, since this is not
Appendix A. Contributed Scripts 638](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-644-320.jpg)
![Advanced Bash-Scripting Guide
a publically accessible site.
Another anti-spam script.
Example A-29. Spammer Hunt
#!/bin/bash
# whx.sh: "whois" spammer lookup
# Author: Walter Dnes
# Slight revisions (first section) by ABS Guide author.
# Used in ABS Guide with permission.
# Needs version 3.x or greater of Bash to run (because of =~ operator).
# Commented by script author and ABS Guide author.
E_BADARGS=65 # Missing command-line arg.
E_NOHOST=66 # Host not found.
E_TIMEOUT=67 # Host lookup timed out.
E_UNDEF=68 # Some other (undefined) error.
HOSTWAIT=10 # Specify up to 10 seconds for host query reply.
# The actual wait may be a bit longer.
OUTFILE=whois.txt # Output file.
PORT=4321
if [ -z "$1" ] # Check for (required) command-line arg.
then
echo "Usage: $0 domain name or IP address"
exit $E_BADARGS
fi
if [[ "$1" =~ "[a-zA-Z][a-zA-Z]$" ]] # Ends in two alpha chars?
then # It's a domain name && must do host lookup.
IPADDR=$(host -W $HOSTWAIT $1 | awk '{print $4}')
# Doing host lookup to get IP address.
# Extract final field.
else
IPADDR="$1" # Command-line arg was IP address.
fi
echo; echo "IP Address is: "$IPADDR""; echo
if [ -e "$OUTFILE" ]
then
rm -f "$OUTFILE"
echo "Stale output file "$OUTFILE" removed."; echo
fi
# Sanity checks.
# (This section needs more work.)
# ===============================
if [ -z "$IPADDR" ]
# No response.
then
echo "Host not found!"
Appendix A. Contributed Scripts 639](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-645-320.jpg)
![Advanced Bash-Scripting Guide
exit $E_NOHOST # Bail out.
fi
if [[ "$IPADDR" =~ "^[;;]" ]]
# ;; connection timed out; no servers could be reached
then
echo "Host lookup timed out!"
exit $E_TIMEOUT # Bail out.
fi
if [[ "$IPADDR" =~ "[(NXDOMAIN)]$" ]]
# Host xxxxxxxxx.xxx not found: 3(NXDOMAIN)
then
echo "Host not found!"
exit $E_NOHOST # Bail out.
fi
if [[ "$IPADDR" =~ "[(SERVFAIL)]$" ]]
# Host xxxxxxxxx.xxx not found: 2(SERVFAIL)
then
echo "Host not found!"
exit $E_NOHOST # Bail out.
fi
# ======================== Main body of script ========================
AFRINICquery() {
# Define the function that queries AFRINIC. Echo a notification to the
#+ screen, and then run the actual query, redirecting output to $OUTFILE.
echo "Searching for $IPADDR in whois.afrinic.net"
whois -h whois.afrinic.net "$IPADDR" > $OUTFILE
# Check for presence of reference to an rwhois.
# Warn about non-functional rwhois.infosat.net server
#+ and attempt rwhois query.
if grep -e "^remarks: .*rwhois.[^ ]+" "$OUTFILE"
then
echo " " >> $OUTFILE
echo "***" >> $OUTFILE
echo "***" >> $OUTFILE
echo "Warning: rwhois.infosat.net was not working as of 2005/02/02" >> $OUTFILE
echo " when this script was written." >> $OUTFILE
echo "***" >> $OUTFILE
echo "***" >> $OUTFILE
echo " " >> $OUTFILE
RWHOIS=`grep "^remarks: .*rwhois.[^ ]+" "$OUTFILE" | tail -n 1 |
sed "s/(^.*)(rwhois..*)(:4.*)/2/"`
whois -h ${RWHOIS}:${PORT} "$IPADDR" >> $OUTFILE
fi
}
APNICquery() {
echo "Searching for $IPADDR in whois.apnic.net"
whois -h whois.apnic.net "$IPADDR" > $OUTFILE
# Just about every country has its own internet registrar.
# I don't normally bother consulting them, because the regional registry
#+ usually supplies sufficient information.
Appendix A. Contributed Scripts 640](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-646-320.jpg)
![Advanced Bash-Scripting Guide
# There are a few exceptions, where the regional registry simply
#+ refers to the national registry for direct data.
# These are Japan and South Korea in APNIC, and Brasil in LACNIC.
# The following if statement checks $OUTFILE (whois.txt) for the presence
#+ of "KR" (South Korea) or "JP" (Japan) in the country field.
# If either is found, the query is re-run against the appropriate
#+ national registry.
if grep -E "^country:[ ]+KR$" "$OUTFILE"
then
echo "Searching for $IPADDR in whois.krnic.net"
whois -h whois.krnic.net "$IPADDR" >> $OUTFILE
elif grep -E "^country:[ ]+JP$" "$OUTFILE"
then
echo "Searching for $IPADDR in whois.nic.ad.jp"
whois -h whois.nic.ad.jp "$IPADDR"/e >> $OUTFILE
fi
}
ARINquery() {
echo "Searching for $IPADDR in whois.arin.net"
whois -h whois.arin.net "$IPADDR" > $OUTFILE
# Several large internet providers listed by ARIN have their own
#+ internal whois service, referred to as "rwhois".
# A large block of IP addresses is listed with the provider
#+ under the ARIN registry.
# To get the IP addresses of 2nd-level ISPs or other large customers,
#+ one has to refer to the rwhois server on port 4321.
# I originally started with a bunch of "if" statements checking for
#+ the larger providers.
# This approach is unwieldy, and there's always another rwhois server
#+ that I didn't know about.
# A more elegant approach is to check $OUTFILE for a reference
#+ to a whois server, parse that server name out of the comment section,
#+ and re-run the query against the appropriate rwhois server.
# The parsing looks a bit ugly, with a long continued line inside
#+ backticks.
# But it only has to be done once, and will work as new servers are added.
#@ ABS Guide author comment: it isn't all that ugly, and is, in fact,
#@+ an instructive use of Regular Expressions.
if grep -E "^Comment: .*rwhois.[^ ]+" "$OUTFILE"
then
RWHOIS=`grep -e "^Comment:.*rwhois.[^ ]+" "$OUTFILE" | tail -n 1 |
sed "s/^(.*)(rwhois.[^ ]+)(.*$)/2/"`
echo "Searching for $IPADDR in ${RWHOIS}"
whois -h ${RWHOIS}:${PORT} "$IPADDR" >> $OUTFILE
fi
}
LACNICquery() {
echo "Searching for $IPADDR in whois.lacnic.net"
whois -h whois.lacnic.net "$IPADDR" > $OUTFILE
# The following if statement checks $OUTFILE (whois.txt) for the presence of
#+ "BR" (Brasil) in the country field.
# If it is found, the query is re-run against whois.registro.br.
if grep -E "^country:[ ]+BR$" "$OUTFILE"
then
echo "Searching for $IPADDR in whois.registro.br"
Appendix A. Contributed Scripts 641](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-647-320.jpg)
![Advanced Bash-Scripting Guide
whois -h whois.registro.br "$IPADDR" >> $OUTFILE
fi
}
RIPEquery() {
echo "Searching for $IPADDR in whois.ripe.net"
whois -h whois.ripe.net "$IPADDR" > $OUTFILE
}
# Initialize a few variables.
# * slash8 is the most significant octet
# * slash16 consists of the two most significant octets
# * octet2 is the second most significant octet
slash8=`echo $IPADDR | cut -d. -f 1`
if [ -z "$slash8" ] # Yet another sanity check.
then
echo "Undefined error!"
exit $E_UNDEF
fi
slash16=`echo $IPADDR | cut -d. -f 1-2`
# ^ Period specified as 'cut" delimiter.
if [ -z "$slash16" ]
then
echo "Undefined error!"
exit $E_UNDEF
fi
octet2=`echo $slash16 | cut -d. -f 2`
if [ -z "$octet2" ]
then
echo "Undefined error!"
exit $E_UNDEF
fi
# Check for various odds and ends of reserved space.
# There is no point in querying for those addresses.
if [ $slash8 == 0 ]; then
echo $IPADDR is '"This Network"' space; Not querying
elif [ $slash8 == 10 ]; then
echo $IPADDR is RFC1918 space; Not querying
elif [ $slash8 == 14 ]; then
echo $IPADDR is '"Public Data Network"' space; Not querying
elif [ $slash8 == 127 ]; then
echo $IPADDR is loopback space; Not querying
elif [ $slash16 == 169.254 ]; then
echo $IPADDR is link-local space; Not querying
elif [ $slash8 == 172 ] && [ $octet2 -ge 16 ] && [ $octet2 -le 31 ];then
echo $IPADDR is RFC1918 space; Not querying
elif [ $slash16 == 192.168 ]; then
echo $IPADDR is RFC1918 space; Not querying
elif [ $slash8 -ge 224 ]; then
echo $IPADDR is either Multicast or reserved space; Not querying
elif [ $slash8 -ge 200 ] && [ $slash8 -le 201 ]; then LACNICquery "$IPADDR"
elif [ $slash8 -ge 202 ] && [ $slash8 -le 203 ]; then APNICquery "$IPADDR"
elif [ $slash8 -ge 210 ] && [ $slash8 -le 211 ]; then APNICquery "$IPADDR"
elif [ $slash8 -ge 218 ] && [ $slash8 -le 223 ]; then APNICquery "$IPADDR"
Appendix A. Contributed Scripts 642](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-648-320.jpg)
![Advanced Bash-Scripting Guide
# If we got this far without making a decision, query ARIN.
# If a reference is found in $OUTFILE to APNIC, AFRINIC, LACNIC, or RIPE,
#+ query the appropriate whois server.
else
ARINquery "$IPADDR"
if grep "whois.afrinic.net" "$OUTFILE"; then
AFRINICquery "$IPADDR"
elif grep -E "^OrgID:[ ]+RIPE$" "$OUTFILE"; then
RIPEquery "$IPADDR"
elif grep -E "^OrgID:[ ]+APNIC$" "$OUTFILE"; then
APNICquery "$IPADDR"
elif grep -E "^OrgID:[ ]+LACNIC$" "$OUTFILE"; then
LACNICquery "$IPADDR"
fi
fi
#@ ---------------------------------------------------------------
# Try also:
# wget http://logi.cc/nw/whois.php3?ACTION=doQuery&DOMAIN=$IPADDR
#@ ---------------------------------------------------------------
# We've now finished the querying.
# Echo a copy of the final result to the screen.
cat $OUTFILE
# Or "less $OUTFILE" . . .
exit 0
#@ ABS Guide author comments:
#@ Nothing fancy here, but still a very useful tool for hunting spammers.
#@ Sure, the script can be cleaned up some, and it's still a bit buggy,
#@+ (exercise for reader), but all the same, it's a nice piece of coding
#@+ by Walter Dnes.
#@ Thank you!
"Little Monster's" front end to wget.
Example A-30. Making wget easier to use
#!/bin/bash
# wgetter2.bash
# Author: Little Monster [monster@monstruum.co.uk]
# ==> Used in ABS Guide with permission of script author.
# ==> This script still needs debugging and fixups (exercise for reader).
# ==> It could also use some additional editing in the comments.
# This is wgetter2 --
#+ a Bash script to make wget a bit more friendly, and save typing.
# Carefully crafted by Little Monster.
# More or less complete on 02/02/2005.
# If you think this script can be improved,
#+ email me at: monster@monstruum.co.uk
# ==> and cc: to the author of the ABS Guide, please.
# This script is licenced under the GPL.
# You are free to copy, alter and re-use it,
Appendix A. Contributed Scripts 643](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-649-320.jpg)
![Advanced Bash-Scripting Guide
Woptions="" # Used for passing wget some options for itself.
inFile="" # Used for the run function.
newFile="" # Used for the run function.
savePath="$home/w-save"
Config="$home/.wgetter2rc"
# This is where some variables can be stored,
#+ if permanently changed from within the script.
Cookie_List="$home/.cookielist"
# So we know where the cookies are kept . . .
cFlag="" # Part of the cookie file selection routine.
# Define the options available. Easy to change letters here if needed.
# These are the optional options; you don't just wait to be asked.
save=s # Save command instead of executing it.
cook=c # Change cookie file for this session.
help=h # Usage guide.
list=l # Pass wget the -i option and URL list.
runn=r # Run saved commands as an argument to the option.
inpu=i # Run saved commands interactively.
wopt=w # Allow to enter options to pass directly to wget.
# --------------------------------------------------------------------
if [ -z "$1" ]; then # Make sure we get something for wget to eat.
echo "You must at least enter a URL or option!"
echo "-$help for usage."
exit $E_NO_OPTS
fi
# +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# added added added added added added added added added added added added
if [ ! -e "$Config" ]; then # See if configuration file exists.
echo "Creating configuration file, $Config"
echo "# This is the configuration file for wgetter2" > "$Config"
echo "# Your customised settings will be saved in this file" >> "$Config"
else
source $Config # Import variables we set outside the script.
fi
if [ ! -e "$Cookie_List" ]; then
# Set up a list of cookie files, if there isn't one.
echo "Hunting for cookies . . ."
find -name cookies.txt >> $Cookie_List # Create the list of cookie files.
fi # Isolate this in its own 'if' statement,
#+ in case we got interrupted while searching.
if [ -z "$cFlag" ]; then # If we haven't already done this . . .
echo # Make a nice space after the command prompt.
echo "Looks like you haven't set up your source of cookies yet."
n=0 # Make sure the counter
#+ doesn't contain random values.
while read; do
Cookies[$n]=$REPLY # Put the cookie files we found into an array.
echo "$n) ${Cookies[$n]}" # Create a menu.
n=$(( n + 1 )) # Increment the counter.
done < $Cookie_List # Feed the read statement.
echo "Enter the number of the cookie file you want to use."
echo "If you won't be using cookies, just press RETURN."
Appendix A. Contributed Scripts 645](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-651-320.jpg)
![Advanced Bash-Scripting Guide
echo
echo "I won't be asking this again. Edit $Config"
echo "If you decide to change at a later date"
echo "or use the -${cook} option for per session changes."
read
if [ ! -z $REPLY ]; then # User didn't just press return.
Cookie=" --load-cookies ${Cookies[$REPLY]}"
# Set the variable here as well as in the config file.
echo "Cookie=" --load-cookies ${Cookies[$REPLY]}"" >> $Config
fi
echo "cFlag=1" >> $Config # So we know not to ask again.
fi
# end added section end added section end added section end added section
# +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# Another variable.
# This one may or may not be subject to variation.
# A bit like the small print.
CookiesON=$Cookie
# echo "cookie file is $CookiesON" # For debugging.
# echo "home is ${home}" # For debugging.
# Got caught with this one!
wopts()
{
echo "Enter options to pass to wget."
echo "It is assumed you know what you're doing."
echo
echo "You can pass their arguments here too."
# That is to say, everything passed here is passed to wget.
read Wopts
# Read in the options to be passed to wget.
Woptions=" $Wopts"
# ^ Why the leading space?
# Assign to another variable.
# Just for fun, or something . . .
echo "passing options ${Wopts} to wget"
# Mainly for debugging.
# Is cute.
return
}
save_func()
{
echo "Settings will be saved."
if [ ! -d $savePath ]; then # See if directory exists.
mkdir $savePath # Create the directory to save things in
#+ if it isn't already there.
fi
Flag=S
# Tell the final bit of code what to do.
Appendix A. Contributed Scripts 646](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-652-320.jpg)
![Advanced Bash-Scripting Guide
# Set a flag since stuff is done in main.
return
}
usage() # Tell them how it works.
{
echo "Welcome to wgetter. This is a front end to wget."
echo "It will always run wget with these options:"
echo "$CommandA"
echo "and the pattern to match: $pattern
(which you can change at the top of this script)."
echo "It will also ask you for recursion depth,
and if you want to use a referring page."
echo "Wgetter accepts the following options:"
echo ""
echo "-$help : Display this help."
echo "-$save : Save the command to a file $savePath/wget-($today)
instead of running it."
echo "-$runn : Run saved wget commands instead of starting a new one -"
echo "Enter filename as argument to this option."
echo "-$inpu : Run saved wget commands interactively --"
echo "The script will ask you for the filename."
echo "-$cook : Change the cookies file for this session."
echo "-$list : Tell wget to use URL's from a list instead of
from the command-line."
echo "-$wopt : Pass any other options direct to wget."
echo ""
echo "See the wget man page for additional options
you can pass to wget."
echo ""
exit $E_USAGE # End here. Don't process anything else.
}
list_func() # Gives the user the option to use the -i option to wget,
#+ and a list of URLs.
{
while [ 1 ]; do
echo "Enter the name of the file containing URL's (press q to change
your mind)."
read urlfile
if [ ! -e "$urlfile" ] && [ "$urlfile" != q ]; then
# Look for a file, or the quit option.
echo "That file does not exist!"
elif [ "$urlfile" = q ]; then # Check quit option.
echo "Not using a url list."
return
else
echo "using $urlfile."
echo "If you gave url's on the command-line, I'll use those first."
# Report wget standard behaviour to the user.
lister=" -i $urlfile" # This is what we want to pass to wget.
return
fi
done
}
Appendix A. Contributed Scripts 647](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-653-320.jpg)
![Advanced Bash-Scripting Guide
cookie_func() # Give the user the option to use a different cookie file.
{
while [ 1 ]; do
echo "Change the cookies file. Press return if you don't want to change
it."
read Cookies
# NB: this is not the same as Cookie, earlier.
# There is an 's' on the end.
# Bit like chocolate chips.
if [ -z "$Cookies" ]; then # Escape clause for wusses.
return
elif [ ! -e "$Cookies" ]; then
echo "File does not exist. Try again." # Keep em going . . .
else
CookiesON=" --load-cookies $Cookies" # File is good -- use it!
return
fi
done
}
run_func()
{
if [ -z "$OPTARG" ]; then
# Test to see if we used the in-line option or the query one.
if [ ! -d "$savePath" ]; then # If directory doesn't exist . . .
echo "$savePath does not appear to exist."
echo "Please supply path and filename of saved wget commands:"
read newFile
until [ -f "$newFile" ]; do # Keep going till we get something.
echo "Sorry, that file does not exist. Please try again."
# Try really hard to get something.
read newFile
done
# -----------------------------------------------------------------------
# if [ -z ( grep wget ${newfile} ) ]; then
# Assume they haven't got the right file and bail out.
# echo "Sorry, that file does not contain wget commands. Aborting."
# exit
# fi
#
# This is bogus code.
# It doesn't actually work.
# If anyone wants to fix it, feel free!
# -----------------------------------------------------------------------
filePath="${newFile}"
else
echo "Save path is $savePath"
echo "Please enter name of the file which you want to use."
echo "You have a choice of:"
ls $savePath # Give them a choice.
read inFile
until [ -f "$savePath/$inFile" ]; do # Keep going till
#+ we get something.
if [ ! -f "${savePath}/${inFile}" ]; then # If file doesn't exist.
echo "Sorry, that file does not exist. Please choose from:"
ls $savePath # If a mistake is made.
Appendix A. Contributed Scripts 648](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-654-320.jpg)
![Advanced Bash-Scripting Guide
read inFile
fi
done
filePath="${savePath}/${inFile}" # Make one variable . . .
fi
else filePath="${savePath}/${OPTARG}" # Which can be many things . . .
fi
if [ ! -f "$filePath" ]; then # If a bogus file got through.
echo "You did not specify a suitable file."
echo "Run this script with the -${save} option first."
echo "Aborting."
exit $E_NO_SAVEFILE
fi
echo "Using: $filePath"
while read; do
eval $REPLY
echo "Completed: $REPLY"
done < $filePath # Feed the actual file we are using into a 'while' loop.
exit
}
# Fish out any options we are using for the script.
# This is based on the demo in "Learning The Bash Shell" (O'Reilly).
while getopts ":$save$cook$help$list$runn:$inpu$wopt" opt
do
case $opt in
$save) save_func;; # Save some wgetter sessions for later.
$cook) cookie_func;; # Change cookie file.
$help) usage;; # Get help.
$list) list_func;; # Allow wget to use a list of URLs.
$runn) run_func;; # Useful if you are calling wgetter from,
#+ for example, a cron script.
$inpu) run_func;; # When you don't know what your files are named.
$wopt) wopts;; # Pass options directly to wget.
?) echo "Not a valid option."
echo "Use -${wopt} to pass options directly to wget,"
echo "or -${help} for help";; # Catch anything else.
esac
done
shift $((OPTIND - 1)) # Do funky magic stuff with $#.
if [ -z "$1" ] && [ -z "$lister" ]; then
# We should be left with at least one URL
#+ on the command-line, unless a list is
#+ being used -- catch empty CL's.
echo "No URL's given! You must enter them on the same line as wgetter2."
echo "E.g., wgetter2 http://somesite http://anothersite."
echo "Use $help option for more information."
exit $E_NO_URLS # Bail out, with appropriate error code.
fi
URLS=" $@"
# Use this so that URL list can be changed if we stay in the option loop.
while [ 1 ]; do
# This is where we ask for the most used options.
# (Mostly unchanged from version 1 of wgetter)
Appendix A. Contributed Scripts 649](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-655-320.jpg)
![Advanced Bash-Scripting Guide
if [ -z $curDepth ]; then
Current=""
else Current=" Current value is $curDepth"
fi
echo "How deep should I go?
(integer: Default is $depthDefault.$Current)"
read Depth # Recursion -- how far should we go?
inputB="" # Reset this to blank on each pass of the loop.
echo "Enter the name of the referring page (default is none)."
read inputB # Need this for some sites.
echo "Do you want to have the output logged to the terminal"
echo "(y/n, default is yes)?"
read noHide # Otherwise wget will just log it to a file.
case $noHide in # Now you see me, now you don't.
y|Y ) hide="";;
n|N ) hide=" -b";;
* ) hide="";;
esac
if [ -z ${Depth} ]; then
# User accepted either default or current depth,
#+ in which case Depth is now empty.
if [ -z ${curDepth} ]; then
# See if a depth was set on a previous iteration.
Depth="$depthDefault"
# Set the default recursion depth if nothing
#+ else to use.
else Depth="$curDepth" # Otherwise, set the one we used before.
fi
fi
Recurse=" -l $Depth" # Set how deep we want to go.
curDepth=$Depth # Remember setting for next time.
if [ ! -z $inputB ]; then
RefA=" --referer=$inputB" # Option to use referring page.
fi
WGETTER="${CommandA}${pattern}${hide}${RefA}${Recurse}
${CookiesON}${lister}${Woptions}${URLS}"
# Just string the whole lot together . . .
# NB: no embedded spaces.
# They are in the individual elements so that if any are empty,
#+ we don't get an extra space.
if [ -z "${CookiesON}" ] && [ "$cFlag" = "1" ] ; then
echo "Warning -- can't find cookie file"
# This should be changed,
#+ in case the user has opted to not use cookies.
fi
if [ "$Flag" = "S" ]; then
echo "$WGETTER" >> $savePath/wget-${today}
# Create a unique filename for today, or append to it if it exists.
echo "$inputB" >> $savePath/site-list-${today}
# Make a list, so it's easy to refer back to,
#+ since the whole command is a bit confusing to look at.
echo "Command saved to the file $savePath/wget-${today}"
# Tell the user.
echo "Referring page URL saved to the file$
savePath/site-list-${today}"
Appendix A. Contributed Scripts 650](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-656-320.jpg)
![Advanced Bash-Scripting Guide
# ==> ################################################################
# Make script crontab friendly:
cd $(dirname $0)
# ==> Change to directory where this script lives.
# datadir is the directory you want podcasts saved to:
datadir=$(date +%Y-%m-%d)
# ==> Will create a date-labeled directory, named: YYYY-MM-DD
# Check for and create datadir if necessary:
if test ! -d $datadir
then
mkdir $datadir
fi
# Delete any temp file:
rm -f temp.log
# Read the bp.conf file and wget any url not already
#+ in the podcast.log file:
while read podcast
do # ==> Main action follows.
file=$(wget -q $podcast -O - | tr 'r' 'n' | tr ' " |
sed -n 's/.*url="([^"]*)".*/1/p')
for url in $file
do
echo $url >> temp.log
if ! grep "$url" podcast.log > /dev/null
then
wget -q -P $datadir "$url"
fi
done
done < bp.conf
# Move dynamically created log file to permanent log file:
cat podcast.log >> temp.log
sort temp.log | uniq > podcast.log
rm temp.log
# Create an m3u playlist:
ls $datadir | grep -v m3u > $datadir/podcast.m3u
exit 0
#################################################
For a different scripting approach to Podcasting,
see Phil Salkie's article,
"Internet Radio to Podcast with Shell Tools"
in the September, 2005 issue of LINUX JOURNAL,
http://www.linuxjournal.com/article/8171
#################################################
Example A-32. Nightly backup to a firewire HD
#!/bin/bash
# nightly-backup.sh
# http://www.richardneill.org/source.php#nightly-backup-rsync
# Copyright (c) 2005 Richard Neill <backup@richardneill.org>.
Appendix A. Contributed Scripts 652](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-658-320.jpg)
![Advanced Bash-Scripting Guide
# This is Free Software licensed under the GNU GPL.
# ==> Included in ABS Guide with script author's kind permission.
# ==> (Thanks!)
# This does a backup from the host computer to a locally connected
#+ firewire HDD using rsync and ssh.
# It then rotates the backups.
# Run it via cron every night at 5am.
# This only backs up the home directory.
# If ownerships (other than the user's) should be preserved,
#+ then run the rsync process as root (and re-instate the -o).
# We save every day for 7 days, then every week for 4 weeks,
#+ then every month for 3 months.
# See: http://www.mikerubel.org/computers/rsync_snapshots/
#+ for more explanation of the theory.
# Save as: $HOME/bin/nightly-backup_firewire-hdd.sh
# Known bugs:
# ----------
# i) Ideally, we want to exclude ~/.tmp and the browser caches.
# ii) If the user is sitting at the computer at 5am,
#+ and files are modified while the rsync is occurring,
#+ then the BACKUP_JUSTINCASE branch gets triggered.
# To some extent, this is a
#+ feature, but it also causes a "disk-space leak".
##### BEGIN CONFIGURATION SECTION ############################################
LOCAL_USER=rjn # User whose home directory should be backed up.
MOUNT_POINT=/backup # Mountpoint of backup drive.
# NO trailing slash!
# This must be unique (eg using a udev symlink)
SOURCE_DIR=/home/$LOCAL_USER # NO trailing slash - it DOES matter to rsync.
BACKUP_DEST_DIR=$MOUNT_POINT/backup/`hostname -s`.${LOCAL_USER}.nightly_backup
DRY_RUN=false #If true, invoke rsync with -n, to do a dry run.
# Comment out or set to false for normal use.
VERBOSE=false # If true, make rsync verbose.
# Comment out or set to false otherwise.
COMPRESS=false # If true, compress.
# Good for internet, bad on LAN.
# Comment out or set to false otherwise.
### Exit Codes ###
E_VARS_NOT_SET=64
E_COMMANDLINE=65
E_MOUNT_FAIL=70
E_NOSOURCEDIR=71
E_UNMOUNTED=72
E_BACKUP=73
##### END CONFIGURATION SECTION ##############################################
# Check that all the important variables have been set:
if [ -z "$LOCAL_USER" ] ||
[ -z "$SOURCE_DIR" ] ||
[ -z "$MOUNT_POINT" ] ||
[ -z "$BACKUP_DEST_DIR" ]
Appendix A. Contributed Scripts 653](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-659-320.jpg)
![Advanced Bash-Scripting Guide
then
echo 'One of the variables is not set! Edit the file: $0. BACKUP FAILED.'
exit $E_VARS_NOT_SET
fi
if [ "$#" != 0 ] # If command-line param(s) . . .
then # Here document(ation).
cat <<-ENDOFTEXT
Automatic Nightly backup run from cron.
Read the source for more details: $0
The backup directory is $BACKUP_DEST_DIR .
It will be created if necessary; initialisation is no longer required.
WARNING: Contents of $BACKUP_DEST_DIR are rotated.
Directories named 'backup.$i' will eventually be DELETED.
We keep backups from every day for 7 days (1-8),
then every week for 4 weeks (9-12),
then every month for 3 months (13-15).
You may wish to add this to your crontab using 'crontab -e'
# Back up files: $SOURCE_DIR to $BACKUP_DEST_DIR
#+ every night at 3:15 am
15 03 * * * /home/$LOCAL_USER/bin/nightly-backup_firewire-hdd.sh
Don't forget to verify the backups are working,
especially if you don't read cron's mail!"
ENDOFTEXT
exit $E_COMMANDLINE
fi
# Parse the options.
# ==================
if [ "$DRY_RUN" == "true" ]; then
DRY_RUN="-n"
echo "WARNING:"
echo "THIS IS A 'DRY RUN'!"
echo "No data will actually be transferred!"
else
DRY_RUN=""
fi
if [ "$VERBOSE" == "true" ]; then
VERBOSE="-v"
else
VERBOSE=""
fi
if [ "$COMPRESS" == "true" ]; then
COMPRESS="-z"
else
COMPRESS=""
fi
# Every week (actually of 8 days) and every month,
#+ extra backups are preserved.
DAY_OF_MONTH=`date +%d` # Day of month (01..31).
if [ $DAY_OF_MONTH = 01 ]; then # First of month.
MONTHSTART=true
elif [ $DAY_OF_MONTH = 08
Appendix A. Contributed Scripts 654](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-660-320.jpg)
![Advanced Bash-Scripting Guide
-o $DAY_OF_MONTH = 16
-o $DAY_OF_MONTH = 24 ]; then
# Day 8,16,24 (use 8, not 7 to better handle 31-day months)
WEEKSTART=true
fi
# Check that the HDD is mounted.
# At least, check that *something* is mounted here!
# We can use something unique to the device, rather than just guessing
#+ the scsi-id by having an appropriate udev rule in
#+ /etc/udev/rules.d/10-rules.local
#+ and by putting a relevant entry in /etc/fstab.
# Eg: this udev rule:
# BUS="scsi", KERNEL="sd*", SYSFS{vendor}="WDC WD16",
# SYSFS{model}="00JB-00GVA0 ", NAME="%k", SYMLINK="lacie_1394d%n"
if mount | grep $MOUNT_POINT >/dev/null; then
echo "Mount point $MOUNT_POINT is indeed mounted. OK"
else
echo -n "Attempting to mount $MOUNT_POINT..."
# If it isn't mounted, try to mount it.
sudo mount $MOUNT_POINT 2>/dev/null
if mount | grep $MOUNT_POINT >/dev/null; then
UNMOUNT_LATER=TRUE
echo "OK"
# Note: Ensure that this is also unmounted
#+ if we exit prematurely with failure.
else
echo "FAILED"
echo -e "Nothing is mounted at $MOUNT_POINT. BACKUP FAILED!"
exit $E_MOUNT_FAIL
fi
fi
# Check that source dir exists and is readable.
if [ ! -r $SOURCE_DIR ] ; then
echo "$SOURCE_DIR does not exist, or cannot be read. BACKUP FAILED."
exit $E_NOSOURCEDIR
fi
# Check that the backup directory structure is as it should be.
# If not, create it.
# Create the subdirectories.
# Note that backup.0 will be created as needed by rsync.
for ((i=1;i<=15;i++)); do
if [ ! -d $BACKUP_DEST_DIR/backup.$i ]; then
if /bin/mkdir -p $BACKUP_DEST_DIR/backup.$i ; then
# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ No [ ] test brackets. Why?
echo "Warning: directory $BACKUP_DEST_DIR/backup.$i is missing,"
echo "or was not initialised. (Re-)creating it."
else
echo "ERROR: directory $BACKUP_DEST_DIR/backup.$i"
echo "is missing and could not be created."
if [ "$UNMOUNT_LATER" == "TRUE" ]; then
# Before we exit, unmount the mount point if necessary.
cd
Appendix A. Contributed Scripts 655](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-661-320.jpg)
![Advanced Bash-Scripting Guide
sudo umount $MOUNT_POINT &&
echo "Unmounted $MOUNT_POINT again. Giving up."
fi
exit $E_UNMOUNTED
fi
fi
done
# Set the permission to 700 for security
#+ on an otherwise permissive multi-user system.
if ! /bin/chmod 700 $BACKUP_DEST_DIR ; then
echo "ERROR: Could not set permissions on $BACKUP_DEST_DIR to 700."
if [ "$UNMOUNT_LATER" == "TRUE" ]; then
# Before we exit, unmount the mount point if necessary.
cd ; sudo umount $MOUNT_POINT
&& echo "Unmounted $MOUNT_POINT again. Giving up."
fi
exit $E_UNMOUNTED
fi
# Create the symlink: current -> backup.1 if required.
# A failure here is not critical.
cd $BACKUP_DEST_DIR
if [ ! -h current ] ; then
if ! /bin/ln -s backup.1 current ; then
echo "WARNING: could not create symlink current -> backup.1"
fi
fi
# Now, do the rsync.
echo "Now doing backup with rsync..."
echo "Source dir: $SOURCE_DIR"
echo -e "Backup destination dir: $BACKUP_DEST_DIRn"
/usr/bin/rsync $DRY_RUN $VERBOSE -a -S --delete --modify-window=60
--link-dest=../backup.1 $SOURCE_DIR $BACKUP_DEST_DIR/backup.0/
# Only warn, rather than exit if the rsync failed,
#+ since it may only be a minor problem.
# E.g., if one file is not readable, rsync will fail.
# This shouldn't prevent the rotation.
# Not using, e.g., `date +%a` since these directories
#+ are just full of links and don't consume *that much* space.
if [ $? != 0 ]; then
BACKUP_JUSTINCASE=backup.`date +%F_%T`.justincase
echo "WARNING: the rsync process did not entirely succeed."
echo "Something might be wrong."
echo "Saving an extra copy at: $BACKUP_JUSTINCASE"
echo "WARNING: if this occurs regularly, a LOT of space will be consumed,"
echo "even though these are just hard-links!"
fi
# Save a readme in the backup parent directory.
# Save another one in the recent subdirectory.
echo "Backup of $SOURCE_DIR on `hostname` was last run on
`date`" > $BACKUP_DEST_DIR/README.txt
Appendix A. Contributed Scripts 656](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-662-320.jpg)
![Advanced Bash-Scripting Guide
echo "This backup of $SOURCE_DIR on `hostname` was created on
`date`" > $BACKUP_DEST_DIR/backup.0/README.txt
# If we are not in a dry run, rotate the backups.
[ -z "$DRY_RUN" ] &&
# Check how full the backup disk is.
# Warn if 90%. if 98% or more, we'll probably fail, so give up.
# (Note: df can output to more than one line.)
# We test this here, rather than before
#+ so that rsync may possibly have a chance.
DISK_FULL_PERCENT=`/bin/df $BACKUP_DEST_DIR |
tr "n" ' ' | awk '{print $12}' | grep -oE [0-9]+ `
echo "Disk space check on backup partition
$MOUNT_POINT $DISK_FULL_PERCENT% full."
if [ $DISK_FULL_PERCENT -gt 90 ]; then
echo "Warning: Disk is greater than 90% full."
fi
if [ $DISK_FULL_PERCENT -gt 98 ]; then
echo "Error: Disk is full! Giving up."
if [ "$UNMOUNT_LATER" == "TRUE" ]; then
# Before we exit, unmount the mount point if necessary.
cd; sudo umount $MOUNT_POINT &&
echo "Unmounted $MOUNT_POINT again. Giving up."
fi
exit $E_UNMOUNTED
fi
# Create an extra backup.
# If this copy fails, give up.
if [ -n "$BACKUP_JUSTINCASE" ]; then
if ! /bin/cp -al $BACKUP_DEST_DIR/backup.0
$BACKUP_DEST_DIR/$BACKUP_JUSTINCASE
then
echo "ERROR: Failed to create extra copy
$BACKUP_DEST_DIR/$BACKUP_JUSTINCASE"
if [ "$UNMOUNT_LATER" == "TRUE" ]; then
# Before we exit, unmount the mount point if necessary.
cd ;sudo umount $MOUNT_POINT &&
echo "Unmounted $MOUNT_POINT again. Giving up."
fi
exit $E_UNMOUNTED
fi
fi
# At start of month, rotate the oldest 8.
if [ "$MONTHSTART" == "true" ]; then
echo -e "nStart of month.
Removing oldest backup: $BACKUP_DEST_DIR/backup.15" &&
/bin/rm -rf $BACKUP_DEST_DIR/backup.15 &&
echo "Rotating monthly,weekly backups:
$BACKUP_DEST_DIR/backup.[8-14] -> $BACKUP_DEST_DIR/backup.[9-15]" &&
/bin/mv $BACKUP_DEST_DIR/backup.14 $BACKUP_DEST_DIR/backup.15 &&
/bin/mv $BACKUP_DEST_DIR/backup.13 $BACKUP_DEST_DIR/backup.14 &&
/bin/mv $BACKUP_DEST_DIR/backup.12 $BACKUP_DEST_DIR/backup.13 &&
/bin/mv $BACKUP_DEST_DIR/backup.11 $BACKUP_DEST_DIR/backup.12 &&
/bin/mv $BACKUP_DEST_DIR/backup.10 $BACKUP_DEST_DIR/backup.11 &&
/bin/mv $BACKUP_DEST_DIR/backup.9 $BACKUP_DEST_DIR/backup.10 &&
/bin/mv $BACKUP_DEST_DIR/backup.8 $BACKUP_DEST_DIR/backup.9
Appendix A. Contributed Scripts 657](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-663-320.jpg)
![Advanced Bash-Scripting Guide
# At start of week, rotate the second-oldest 4.
elif [ "$WEEKSTART" == "true" ]; then
echo -e "nStart of week.
Removing oldest weekly backup: $BACKUP_DEST_DIR/backup.12" &&
/bin/rm -rf $BACKUP_DEST_DIR/backup.12 &&
echo "Rotating weekly backups:
$BACKUP_DEST_DIR/backup.[8-11] -> $BACKUP_DEST_DIR/backup.[9-12]" &&
/bin/mv $BACKUP_DEST_DIR/backup.11 $BACKUP_DEST_DIR/backup.12 &&
/bin/mv $BACKUP_DEST_DIR/backup.10 $BACKUP_DEST_DIR/backup.11 &&
/bin/mv $BACKUP_DEST_DIR/backup.9 $BACKUP_DEST_DIR/backup.10 &&
/bin/mv $BACKUP_DEST_DIR/backup.8 $BACKUP_DEST_DIR/backup.9
else
echo -e "nRemoving oldest daily backup: $BACKUP_DEST_DIR/backup.8" &&
/bin/rm -rf $BACKUP_DEST_DIR/backup.8
fi &&
# Every day, rotate the newest 8.
echo "Rotating daily backups:
$BACKUP_DEST_DIR/backup.[1-7] -> $BACKUP_DEST_DIR/backup.[2-8]" &&
/bin/mv $BACKUP_DEST_DIR/backup.7 $BACKUP_DEST_DIR/backup.8 &&
/bin/mv $BACKUP_DEST_DIR/backup.6 $BACKUP_DEST_DIR/backup.7 &&
/bin/mv $BACKUP_DEST_DIR/backup.5 $BACKUP_DEST_DIR/backup.6 &&
/bin/mv $BACKUP_DEST_DIR/backup.4 $BACKUP_DEST_DIR/backup.5 &&
/bin/mv $BACKUP_DEST_DIR/backup.3 $BACKUP_DEST_DIR/backup.4 &&
/bin/mv $BACKUP_DEST_DIR/backup.2 $BACKUP_DEST_DIR/backup.3 &&
/bin/mv $BACKUP_DEST_DIR/backup.1 $BACKUP_DEST_DIR/backup.2 &&
/bin/mv $BACKUP_DEST_DIR/backup.0 $BACKUP_DEST_DIR/backup.1 &&
SUCCESS=true
if [ "$UNMOUNT_LATER" == "TRUE" ]; then
# Unmount the mount point if it wasn't mounted to begin with.
cd ; sudo umount $MOUNT_POINT && echo "Unmounted $MOUNT_POINT again."
fi
if [ "$SUCCESS" == "true" ]; then
echo 'SUCCESS!'
exit 0
fi
# Should have already exited if backup worked.
echo 'BACKUP FAILED! Is this just a dry run? Is the disk full?) '
exit $E_BACKUP
Example A-33. An expanded cd command
###########################################################################
#
# cdll
# by Phil Braham
#
# ############################################
# Latest version of this script available from
# http://freshmeat.net/projects/cd/
# ############################################
#
Appendix A. Contributed Scripts 658](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-664-320.jpg)
![Advanced Bash-Scripting Guide
# .cd_new
#
# An enhancement of the Unix cd command
#
# There are unlimited stack entries and special entries. The stack
# entries keep the last cd_maxhistory
# directories that have been used. The special entries can be
# assigned to commonly used directories.
#
# The special entries may be pre-assigned by setting the environment
# variables CDSn or by using the -u or -U command.
#
# The following is a suggestion for the .profile file:
#
# . cdll # Set up the cd command
# alias cd='cd_new' # Replace the cd command
# cd -U # Upload pre-assigned entries for
# #+ the stack and special entries
# cd -D # Set non-default mode
# alias @="cd_new @" # Allow @ to be used to get history
#
# For help type:
#
# cd -h or
# cd -H
#
#
###########################################################################
#
# Version 1.2.1
#
# Written by Phil Braham - Realtime Software Pty Ltd
# (realtime@mpx.com.au)
# Please send any suggestions or enhancements to the author (also at
# phil@braham.net)
#
############################################################################
cd_hm ()
{
${PRINTF} "%s" "cd [dir] [0-9] [@[s|h] [-g [<dir>]] [-d]
[-D] [-r<n>] [dir|0-9] [-R<n>] [<dir>|0-9]
[-s<n>] [-S<n>] [-u] [-U] [-f] [-F] [-h] [-H] [-v]
<dir> Go to directory
0-n Go to previous directory (0 is previous, 1 is last but 1 etc)
n is up to max history (default is 50)
@ List history and special entries
@h List history entries
@s List special entries
-g [<dir>] Go to literal name (bypass special names)
This is to allow access to dirs called '0','1','-h' etc
-d Change default action - verbose. (See note)
-D Change default action - silent. (See note)
-s<n> Go to the special entry <n>*
-S<n> Go to the special entry <n>
and replace it with the current dir*
-r<n> [<dir>] Go to directory <dir>
and then put it on special entry <n>*
-R<n> [<dir>] Go to directory <dir>
and put current dir on special entry <n>*
-a<n> Alternative suggested directory. See note below.
-f [<file>] File entries to <file>.
Appendix A. Contributed Scripts 659](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-665-320.jpg)
![Advanced Bash-Scripting Guide
-u [<file>] Update entries from <file>.
If no filename supplied then default file
(${CDPath}${2:-"$CDFile"}) is used
-F and -U are silent versions
-v Print version number
-h Help
-H Detailed help
*The special entries (0 - 9) are held until log off, replaced by another
entry or updated with the -u command
Alternative suggested directories:
If a directory is not found then CD will suggest any
possibilities. These are directories starting with the same letters
and if any are found they are listed prefixed with -a<n>
where <n> is a number.
It's possible to go to the directory by entering cd -a<n>
on the command line.
The directory for -r<n> or -R<n> may be a number.
For example:
$ cd -r3 4 Go to history entry 4 and put it on special entry 3
$ cd -R3 4 Put current dir on the special entry 3
and go to history entry 4
$ cd -s3 Go to special entry 3
Note that commands R,r,S and s may be used without a number
and refer to 0:
$ cd -s Go to special entry 0
$ cd -S Go to special entry 0 and make special
entry 0 current dir
$ cd -r 1 Go to history entry 1 and put it on special entry 0
$ cd -r Go to history entry 0 and put it on special entry 0
"
if ${TEST} "$CD_MODE" = "PREV"
then
${PRINTF} "$cd_mnset"
else
${PRINTF} "$cd_mset"
fi
}
cd_Hm ()
{
cd_hm
${PRINTF} "%s" "
The previous directories (0-$cd_maxhistory) are stored in the
environment variables CD[0] - CD[$cd_maxhistory]
Similarly the special directories S0 - $cd_maxspecial are in
the environment variable CDS[0] - CDS[$cd_maxspecial]
and may be accessed from the command line
The default pathname for the -f and -u commands is $CDPath
The default filename for the -f and -u commands is $CDFile
Set the following environment variables:
CDL_PROMPTLEN - Set to the length of prompt you require.
Prompt string is set to the right characters of the
current directory.
If not set then prompt is left unchanged
CDL_PROMPT_PRE - Set to the string to prefix the prompt.
Default is:
Appendix A. Contributed Scripts 660](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-666-320.jpg)
![Advanced Bash-Scripting Guide
non-root: "[e[01;34m]" (sets colour to blue).
root: "[e[01;31m]" (sets colour to red).
CDL_PROMPT_POST - Set to the string to suffix the prompt.
Default is:
non-root: "[e[00m]$"
(resets colour and displays $).
root: "[e[00m]#"
(resets colour and displays #).
CDPath - Set the default path for the -f & -u options.
Default is home directory
CDFile - Set the default filename for the -f & -u options.
Default is cdfile
"
cd_version
}
cd_version ()
{
printf "Version: ${VERSION_MAJOR}.${VERSION_MINOR} Date: ${VERSION_DATE}n"
}
#
# Truncate right.
#
# params:
# p1 - string
# p2 - length to truncate to
#
# returns string in tcd
#
cd_right_trunc ()
{
local tlen=${2}
local plen=${#1}
local str="${1}"
local diff
local filler="<--"
if ${TEST} ${plen} -le ${tlen}
then
tcd="${str}"
else
let diff=${plen}-${tlen}
elen=3
if ${TEST} ${diff} -le 2
then
let elen=${diff}
fi
tlen=-${tlen}
let tlen=${tlen}+${elen}
tcd=${filler:0:elen}${str:tlen}
fi
}
#
# Three versions of do history:
# cd_dohistory - packs history and specials side by side
# cd_dohistoryH - Shows only hstory
# cd_dohistoryS - Shows only specials
#
cd_dohistory ()
Appendix A. Contributed Scripts 661](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-667-320.jpg)
![Advanced Bash-Scripting Guide
{
cd_getrc
${PRINTF} "History:n"
local -i count=${cd_histcount}
while ${TEST} ${count} -ge 0
do
cd_right_trunc "${CD[count]}" ${cd_lchar}
${PRINTF} "%2d %-${cd_lchar}.${cd_lchar}s " ${count} "${tcd}"
cd_right_trunc "${CDS[count]}" ${cd_rchar}
${PRINTF} "S%d %-${cd_rchar}.${cd_rchar}sn" ${count} "${tcd}"
count=${count}-1
done
}
cd_dohistoryH ()
{
cd_getrc
${PRINTF} "History:n"
local -i count=${cd_maxhistory}
while ${TEST} ${count} -ge 0
do
${PRINTF} "${count} %-${cd_flchar}.${cd_flchar}sn" ${CD[$count]}
count=${count}-1
done
}
cd_dohistoryS ()
{
cd_getrc
${PRINTF} "Specials:n"
local -i count=${cd_maxspecial}
while ${TEST} ${count} -ge 0
do
${PRINTF} "S${count} %-${cd_flchar}.${cd_flchar}sn" ${CDS[$count]}
count=${count}-1
done
}
cd_getrc ()
{
cd_flchar=$(stty -a | awk -F ;
'/rows/ { print $2 $3 }' | awk -F '{ print $4 }')
if ${TEST} ${cd_flchar} -ne 0
then
cd_lchar=${cd_flchar}/2-5
cd_rchar=${cd_flchar}/2-5
cd_flchar=${cd_flchar}-5
else
cd_flchar=${FLCHAR:=75}
# cd_flchar is used for for the @s & @h history
cd_lchar=${LCHAR:=35}
cd_rchar=${RCHAR:=35}
fi
}
cd_doselection ()
{
local -i nm=0
cd_doflag="TRUE"
if ${TEST} "${CD_MODE}" = "PREV"
then
Appendix A. Contributed Scripts 662](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-668-320.jpg)
![Advanced Bash-Scripting Guide
if ${TEST} -z "$cd_npwd"
then
cd_npwd=0
fi
fi
tm=$(echo "${cd_npwd}" | cut -b 1)
if ${TEST} "${tm}" = "-"
then
pm=$(echo "${cd_npwd}" | cut -b 2)
nm=$(echo "${cd_npwd}" | cut -d $pm -f2)
case "${pm}" in
a) cd_npwd=${cd_sugg[$nm]} ;;
s) cd_npwd="${CDS[$nm]}" ;;
S) cd_npwd="${CDS[$nm]}" ; CDS[$nm]=`pwd` ;;
r) cd_npwd="$2" ; cd_specDir=$nm ; cd_doselection "$1" "$2";;
R) cd_npwd="$2" ; CDS[$nm]=`pwd` ; cd_doselection "$1" "$2";;
esac
fi
if ${TEST} "${cd_npwd}" != "." -a "${cd_npwd}"
!= ".." -a "${cd_npwd}" -le ${cd_maxhistory} >>/dev/null 2>&1
then
cd_npwd=${CD[$cd_npwd]}
else
case "$cd_npwd" in
@) cd_dohistory ; cd_doflag="FALSE" ;;
@h) cd_dohistoryH ; cd_doflag="FALSE" ;;
@s) cd_dohistoryS ; cd_doflag="FALSE" ;;
-h) cd_hm ; cd_doflag="FALSE" ;;
-H) cd_Hm ; cd_doflag="FALSE" ;;
-f) cd_fsave "SHOW" $2 ; cd_doflag="FALSE" ;;
-u) cd_upload "SHOW" $2 ; cd_doflag="FALSE" ;;
-F) cd_fsave "NOSHOW" $2 ; cd_doflag="FALSE" ;;
-U) cd_upload "NOSHOW" $2 ; cd_doflag="FALSE" ;;
-g) cd_npwd="$2" ;;
-d) cd_chdefm 1; cd_doflag="FALSE" ;;
-D) cd_chdefm 0; cd_doflag="FALSE" ;;
-r) cd_npwd="$2" ; cd_specDir=0 ; cd_doselection "$1" "$2";;
-R) cd_npwd="$2" ; CDS[0]=`pwd` ; cd_doselection "$1" "$2";;
-s) cd_npwd="${CDS[0]}" ;;
-S) cd_npwd="${CDS[0]}" ; CDS[0]=`pwd` ;;
-v) cd_version ; cd_doflag="FALSE";;
esac
fi
}
cd_chdefm ()
{
if ${TEST} "${CD_MODE}" = "PREV"
then
CD_MODE=""
if ${TEST} $1 -eq 1
then
${PRINTF} "${cd_mset}"
fi
else
CD_MODE="PREV"
if ${TEST} $1 -eq 1
then
${PRINTF} "${cd_mnset}"
fi
fi
Appendix A. Contributed Scripts 663](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-669-320.jpg)
![Advanced Bash-Scripting Guide
}
cd_fsave ()
{
local sfile=${CDPath}${2:-"$CDFile"}
if ${TEST} "$1" = "SHOW"
then
${PRINTF} "Saved to %sn" $sfile
fi
${RM} -f ${sfile}
local -i count=0
while ${TEST} ${count} -le ${cd_maxhistory}
do
echo "CD[$count]="${CD[$count]}"" >> ${sfile}
count=${count}+1
done
count=0
while ${TEST} ${count} -le ${cd_maxspecial}
do
echo "CDS[$count]="${CDS[$count]}"" >> ${sfile}
count=${count}+1
done
}
cd_upload ()
{
local sfile=${CDPath}${2:-"$CDFile"}
if ${TEST} "${1}" = "SHOW"
then
${PRINTF} "Loading from %sn" ${sfile}
fi
. ${sfile}
}
cd_new ()
{
local -i count
local -i choose=0
cd_npwd="${1}"
cd_specDir=-1
cd_doselection "${1}" "${2}"
if ${TEST} ${cd_doflag} = "TRUE"
then
if ${TEST} "${CD[0]}" != "`pwd`"
then
count=$cd_maxhistory
while ${TEST} $count -gt 0
do
CD[$count]=${CD[$count-1]}
count=${count}-1
done
CD[0]=`pwd`
fi
command cd "${cd_npwd}" 2>/dev/null
if ${TEST} $? -eq 1
then
${PRINTF} "Unknown dir: %sn" "${cd_npwd}"
local -i ftflag=0
for i in "${cd_npwd}"*
do
Appendix A. Contributed Scripts 664](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-670-320.jpg)
![Advanced Bash-Scripting Guide
if ${TEST} -d "${i}"
then
if ${TEST} ${ftflag} -eq 0
then
${PRINTF} "Suggest:n"
ftflag=1
fi
${PRINTF} "t-a${choose} %sn" "$i"
cd_sugg[$choose]="${i}"
choose=${choose}+1
fi
done
fi
fi
if ${TEST} ${cd_specDir} -ne -1
then
CDS[${cd_specDir}]=`pwd`
fi
if ${TEST} ! -z "${CDL_PROMPTLEN}"
then
cd_right_trunc "${PWD}" ${CDL_PROMPTLEN}
cd_rp=${CDL_PROMPT_PRE}${tcd}${CDL_PROMPT_POST}
export PS1="$(echo -ne ${cd_rp})"
fi
}
#########################################################################
# #
# Initialisation here #
# #
#########################################################################
#
VERSION_MAJOR="1"
VERSION_MINOR="2.1"
VERSION_DATE="24-MAY-2003"
#
alias cd=cd_new
#
# Set up commands
RM=/bin/rm
TEST=test
PRINTF=printf # Use builtin printf
#########################################################################
# #
# Change this to modify the default pre- and post prompt strings. #
# These only come into effect if CDL_PROMPTLEN is set. #
# #
#########################################################################
if ${TEST} ${EUID} -eq 0
then
# CDL_PROMPT_PRE=${CDL_PROMPT_PRE:="$HOSTNAME@"}
CDL_PROMPT_PRE=${CDL_PROMPT_PRE:="[e[01;31m]"} # Root is in red
CDL_PROMPT_POST=${CDL_PROMPT_POST:="[e[00m]#"}
else
CDL_PROMPT_PRE=${CDL_PROMPT_PRE:="[e[01;34m]"} # Users in blue
CDL_PROMPT_POST=${CDL_PROMPT_POST:="[e[00m]$"}
fi
#########################################################################
#
# cd_maxhistory defines the max number of history entries allowed.
Appendix A. Contributed Scripts 665](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-671-320.jpg)
![Advanced Bash-Scripting Guide
cd -U # Upload directories
cd -D # Set default action to non-posix
######################################################################
The full meaning of these commands will become clear later.
There are a couple of caveats. If another program changes the directory
without calling cdll, then the directory won't be put on the stack and
also if the prompt facility is used then this will not be updated. Two
programs that can do this are pushd and popd. To update the prompt and
stack simply enter:
cd .
Note that if the previous entry on the stack is the current directory
then the stack is not updated.
Usage
=====
cd [dir] [0-9] [@[s|h] [-g <dir>] [-d] [-D] [-r<n>]
[dir|0-9] [-R<n>] [<dir>|0-9] [-s<n>] [-S<n>]
[-u] [-U] [-f] [-F] [-h] [-H] [-v]
<dir> Go to directory
0-n Goto previous directory (0 is previous,
1 is last but 1, etc.)
n is up to max history (default is 50)
@ List history and special entries (Usually available as $ @)
@h List history entries
@s List special entries
-g [<dir>] Go to literal name (bypass special names)
This is to allow access to dirs called '0','1','-h' etc
-d Change default action - verbose. (See note)
-D Change default action - silent. (See note)
-s<n> Go to the special entry <n>
-S<n> Go to the special entry <n>
and replace it with the current dir
-r<n> [<dir>] Go to directory <dir>
and then put it on special entry <n>
-R<n> [<dir>] Go to directory <dir>
and put current dir on special entry <n>
-a<n> Alternative suggested directory. See note below.
-f [<file>] File entries to <file>.
-u [<file>] Update entries from <file>.
If no filename supplied then default file (~/cdfile) is used
-F and -U are silent versions
-v Print version number
-h Help
-H Detailed help
Examples
========
These examples assume non-default mode is set (that is, cd with no
parameters will go to the most recent stack directory), that aliases
have been set up for cd and @ as described above and that cd's prompt
facility is active and the prompt length is 21 characters.
/home/phil$ @
# List the entries with the @
Appendix A. Contributed Scripts 668](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-674-320.jpg)
![Advanced Bash-Scripting Guide
Alternative suggested directories:
If a directory is not found, then CD will suggest any
possibilities. These are directories starting with the same letters
and if any are found they are listed prefixed with -a<n>
where <n> is a number. It's possible to go to the directory
by entering cd -a<n> on the command line.
Use cd -d or -D to change default cd action. cd -H will show
current action.
The history entries (0-n) are stored in the environment variables
CD[0] - CD[n]
Similarly the special directories S0 - 9 are in the environment
variable CDS[0] - CDS[9]
and may be accessed from the command line, for example:
ls -l ${CDS[3]}
cat ${CD[8]}/file.txt
The default pathname for the -f and -u commands is ~
The default filename for the -f and -u commands is cdfile
Configuration
=============
The following environment variables can be set:
CDL_PROMPTLEN - Set to the length of prompt you require.
Prompt string is set to the right characters of the current
directory. If not set, then prompt is left unchanged. Note
that this is the number of characters that the directory is
shortened to, not the total characters in the prompt.
CDL_PROMPT_PRE - Set to the string to prefix the prompt.
Default is:
non-root: "[e[01;34m]" (sets colour to blue).
root: "[e[01;31m]" (sets colour to red).
CDL_PROMPT_POST - Set to the string to suffix the prompt.
Default is:
non-root: "[e[00m]$"
(resets colour and displays $).
root: "[e[00m]#"
(resets colour and displays #).
Note:
CDL_PROMPT_PRE & _POST only t
CDPath - Set the default path for the -f & -u options.
Default is home directory
CDFile - Set the default filename for the -f & -u options.
Default is cdfile
There are three variables defined in the file cdll which control the
number of entries stored or displayed. They are in the section labeled
'Initialisation here' towards the end of the file.
cd_maxhistory - The number of history entries stored.
Appendix A. Contributed Scripts 670](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-676-320.jpg)
![Advanced Bash-Scripting Guide
# Parse resource settings.
{ read # Discard "state = active" (see below).
read bla port1
read bla port2
read bla port3
read bla irq
read bla dma1
read bla dma2
# The "bla's" are labels in the first field: "io," "state," etc.
# These are discarded.
# Hack: with PnPBIOS: ports are: port1: WSS, port2:
#+ OPL, port3: sb (unneeded)
# with ACPI-PnP:ports are: port1: OPL, port2: sb, port3: WSS
# (ACPI bios seems to be wrong here, the PnP-card-code in snd-cs4236.c
#+ uses the PnPBIOS port order)
# Detect port order using the fixed OPL port as reference.
if [ ${port2%%-*} = 0x388 ]
# ^^^^ Strip out everything following hyphen in port address.
# So, if port1 is 0x530-0x537
#+ we're left with 0x530 -- the start address of the port.
then
# PnPBIOS: usual order
port=${port1%%-*}
oplport=${port2%%-*}
else
# ACPI: mixed-up order
port=${port3%%-*}
oplport=${port1%%-*}
fi
} < $WSSDEV/resources
# To see what's going on here:
# ---------------------------
# cat /sys/devices/pnp0/00:07/resources
#
# state = active
# io 0x530-0x537
# io 0x388-0x38b
# io 0x220-0x233
# irq 5
# dma 1
# dma 0
# ^^^ "bla" labels in first field (discarded).
{ read # Discard first line, as above.
read bla port1
cport=${port1%%-*}
# ^^^^
# Just want _start_ address of port.
} < $CTLDEV/resources
# Load the module:
modprobe --ignore-install snd-cs4236 port=$port cport=$cport
fm_port=$oplport irq=$irq dma1=$dma1 dma2=$dma2 isapnp=0 index=0
# See the modprobe manpage.
exit $?
Appendix A. Contributed Scripts 672](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-678-320.jpg)
![Advanced Bash-Scripting Guide
Example A-35. Locating split paragraphs in a text file
#!/bin/bash
# find-splitpara.sh
# Finds split paragraphs in a text file,
#+ and tags the line numbers.
ARGCOUNT=1 # Expect one arg.
E_WRONGARGS=65
file="$1" # Target filename.
lineno=1 # Line number. Start at 1.
Flag=0 # Blank line flag.
if [ $# -ne "$ARGCOUNT" ]
then
echo "Usage: `basename $0` FILENAME"
exit $E_WRONGARGS
fi
file_read () # Scan file for pattern, then print line.
{
while read line
do
if [[ "$line" =~ ^[a-z] && $Flag -eq 1 ]]
then # Line begins with lc character, following blank line.
echo -n "$lineno:: "
echo "$line"
fi
if [[ "$line" =~ "^$" ]]
then # If blank line,
Flag=1 #+ set flag.
else
Flag=0
fi
((lineno++))
done
} < $file # Redirect file into function's stdin.
file_read
exit $?
# ----------------------------------------------------------------
This is line one of an example paragraph, bla, bla, bla.
This is line two, and line three should follow on next line, but
there is a blank line separating the two parts of the paragraph.
# ----------------------------------------------------------------
Running this script on a file containing the above paragraph
yields:
4:: there is a blank line separating the two parts of the paragraph.
Appendix A. Contributed Scripts 673](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-679-320.jpg)
![Advanced Bash-Scripting Guide
There will be additional output for all the other split paragraphs
in the target file.
Example A-36. Insertion sort
#!/bin/bash
# insertion-sort.bash: Insertion sort implementation in Bash
# Heavy use of Bash array features:
#+ (string) slicing, merging, etc
# URL: http://www.lugmen.org.ar/~jjo/jjotip/insertion-sort.bash.d
#+ /insertion-sort.bash.sh
#
# Author: JuanJo Ciarlante <jjo@irrigacion.gov.ar>
# Lightly reformatted by ABS Guide author.
# License: GPLv2
# Used in ABS Guide with author's permission (thanks!).
#
# Test with: ./insertion-sort.bash -t
# Or: bash insertion-sort.bash -t
# The following *doesn't* work:
# sh insertion-sort.bash -t
# Why not? Hint: which Bash-specific features are disabled
#+ when running a script by 'sh script.sh'?
#
: ${DEBUG:=0} # Debug, override with: DEBUG=1 ./scriptname . . .
# Parameter substitution -- set DEBUG to 0 if not previously set.
# Global array: "list"
typeset -a list
# Load whitespace-separated numbers from stdin.
if [ "$1" = "-t" ]; then
DEBUG=1
read -a list < <( od -Ad -w24 -t u2 /dev/urandom ) # Random list.
# ^ ^ process substition
else
read -a list
fi
numelem=${#list[*]}
# Shows the list, marking the element whose index is $1
#+ by surrounding it with the two chars passed as $2.
# Whole line prefixed with $3.
showlist()
{
echo "$3"${list[@]:0:$1} ${2:0:1}${list[$1]}${2:1:1} ${list[@]:$1+1};
}
# Loop _pivot_ -- from second element to end of list.
for(( i=1; i<numelem; i++ )) do
((DEBUG))&&showlist i "[]" " "
# From current _pivot_, back to first element.
for(( j=i; j; j-- )) do
# Search for the 1st elem. less than current "pivot" . . .
[[ "${list[j-1]}" -le "${list[i]}" ]] && break
done
(( i==j )) && continue ## No insertion was needed for this element.
# . . . Move list[i] (pivot) to the left of list[j]:
list=(${list[@]:0:j} ${list[i]} ${list[j]}
Appendix A. Contributed Scripts 674](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-680-320.jpg)
![Advanced Bash-Scripting Guide
# {0,j-1} {i} {j}
${list[@]:j+1:i-(j+1)} ${list[@]:i+1})
# {j+1,i-1} {i+1,last}
((DEBUG))&&showlist j "<>" "*"
done
echo
echo "------"
echo $'Result:n'${list[@]}
exit $?
Example A-37. Standard Deviation
#!/bin/bash
# sd.sh: Standard Deviation
# The Standard Deviation indicates how consistent a set of data is.
# It shows to what extent the individual data points deviate from the
#+ arithmetic mean, i.e., how much they "bounce around" (or cluster).
# It is essentially the average deviation-distance of the
#+ data points from the mean.
# =========================================================== #
# To calculate the Standard Deviation:
#
# 1 Find the arithmetic mean (average) of all the data points.
# 2 Subtract each data point from the arithmetic mean,
# and square that difference.
# 3 Add all of the individual difference-squares in # 2.
# 4 Divide the sum in # 3 by the number of data points.
# This is known as the "variance."
# 5 The square root of # 4 gives the Standard Deviation.
# =========================================================== #
count=0 # Number of data points; global.
SC=9 # Scale to be used by bc. Nine decimal places.
E_DATAFILE=90 # Data file error.
# ----------------- Set data file ---------------------
if [ ! -z "$1" ] # Specify filename as cmd-line arg?
then
datafile="$1" # ASCII text file,
else #+ one (numerical) data point per line!
datafile=sample.dat
fi # See example data file, below.
if [ ! -e "$datafile" ]
then
echo """$datafile"" does not exist!"
exit $E_DATAFILE
fi
# -----------------------------------------------------
arith_mean ()
{
local rt=0 # Running total.
local am=0 # Arithmetic mean.
local ct=0 # Number of data points.
Appendix A. Contributed Scripts 675](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-681-320.jpg)
![Advanced Bash-Scripting Guide
# 18.64
# $ sh sd.sh sample1.dat
# Number of data points in "sample1.dat" = 5
# Arithmetic mean (average) = 18.756000000
# Standard Deviation = .235338054
# ++++++++++++++++++++++++++++++++++++++++ #
Example A-38. A pad file generator for shareware authors
#!/bin/bash
# pad.sh
#######################################################
# PAD (xml) file creator
#+ Written by Mendel Cooper <thegrendel.abs@gmail.com>.
#+ Released to the Public Domain.
#
# Generates a "PAD" descriptor file for shareware
#+ packages, according to the specifications
#+ of the ASP.
# http://www.asp-shareware.org/pad
#######################################################
# Accepts (optional) save filename as a command-line argument.
if [ -n "$1" ]
then
savefile=$1
else
savefile=save_file.xml # Default save_file name.
fi
# ===== PAD file headers =====
HDR1="<?xml version="1.0" encoding="Windows-1252" ?>"
HDR2="<XML_DIZ_INFO>"
HDR3="<MASTER_PAD_VERSION_INFO>"
HDR4="t<MASTER_PAD_VERSION>1.15</MASTER_PAD_VERSION>"
HDR5="t<MASTER_PAD_INFO>Portable Application Description, or PAD
for short, is a data set that is used by shareware authors to
disseminate information to anyone interested in their software products.
To find out more go to http://www.asp-shareware.org/pad</MASTER_PAD_INFO>"
HDR6="</MASTER_PAD_VERSION_INFO>"
# ============================
fill_in ()
{
if [ -z "$2" ]
then
echo -n "$1? " # Get user input.
else
echo -n "$1 $2? " # Additional query?
fi
read var # May paste to fill in field.
# This shows how flexible "read" can be.
Appendix A. Contributed Scripts 677](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-683-320.jpg)
![Advanced Bash-Scripting Guide
if [ -z "$var" ]
then
echo -e "tt<$1 />" >>$savefile # Indent with 2 tabs.
return
else
echo -e "tt<$1>$var</$1>" >>$savefile
return ${#var} # Return length of input string.
fi
}
check_field_length () # Check length of program description fields.
{
# $1 = maximum field length
# $2 = actual field length
if [ "$2" -gt "$1" ]
then
echo "Warning: Maximum field length of $1 characters exceeded!"
fi
}
clear # Clear screen.
echo "PAD File Creator"
echo "--- ---- -------"
echo
# Write File Headers to file.
echo $HDR1 >$savefile
echo $HDR2 >>$savefile
echo $HDR3 >>$savefile
echo -e $HDR4 >>$savefile
echo -e $HDR5 >>$savefile
echo $HDR6 >>$savefile
# Company_Info
echo "COMPANY INFO"
CO_HDR="Company_Info"
echo "<$CO_HDR>" >>$savefile
fill_in Company_Name
fill_in Address_1
fill_in Address_2
fill_in City_Town
fill_in State_Province
fill_in Zip_Postal_Code
fill_in Country
# If applicable:
# fill_in ASP_Member "[Y/N]"
# fill_in ASP_Member_Number
# fill_in ESC_Member "[Y/N]"
fill_in Company_WebSite_URL
clear # Clear screen between sections.
# Contact_Info
echo "CONTACT INFO"
CONTACT_HDR="Contact_Info"
echo "<$CONTACT_HDR>" >>$savefile
fill_in Author_First_Name
fill_in Author_Last_Name
Appendix A. Contributed Scripts 678](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-684-320.jpg)
![Advanced Bash-Scripting Guide
fill_in Author_Email
fill_in Contact_First_Name
fill_in Contact_Last_Name
fill_in Contact_Email
echo -e "t</$CONTACT_HDR>" >>$savefile
# END Contact_Info
clear
# Support_Info
echo "SUPPORT INFO"
SUPPORT_HDR="Support_Info"
echo "<$SUPPORT_HDR>" >>$savefile
fill_in Sales_Email
fill_in Support_Email
fill_in General_Email
fill_in Sales_Phone
fill_in Support_Phone
fill_in General_Phone
fill_in Fax_Phone
echo -e "t</$SUPPORT_HDR>" >>$savefile
# END Support_Info
echo "</$CO_HDR>" >>$savefile
# END Company_Info
clear
# Program_Info
echo "PROGRAM INFO"
PROGRAM_HDR="Program_Info"
echo "<$PROGRAM_HDR>" >>$savefile
fill_in Program_Name
fill_in Program_Version
fill_in Program_Release_Month
fill_in Program_Release_Day
fill_in Program_Release_Year
fill_in Program_Cost_Dollars
fill_in Program_Cost_Other
fill_in Program_Type "[Shareware/Freeware/GPL]"
fill_in Program_Release_Status "[Beta, Major Upgrade, etc.]"
fill_in Program_Install_Support
fill_in Program_OS_Support "[Win9x/Win2k/Linux/etc.]"
fill_in Program_Language "[English/Spanish/etc.]"
echo; echo
# File_Info
echo "FILE INFO"
FILEINFO_HDR="File_Info"
echo "<$FILEINFO_HDR>" >>$savefile
fill_in Filename_Versioned
fill_in Filename_Previous
fill_in Filename_Generic
fill_in Filename_Long
fill_in File_Size_Bytes
fill_in File_Size_K
fill_in File_Size_MB
echo -e "t</$FILEINFO_HDR>" >>$savefile
# END File_Info
clear
Appendix A. Contributed Scripts 679](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-685-320.jpg)
![Advanced Bash-Scripting Guide
# Expire_Info
echo "EXPIRE INFO"
EXPIRE_HDR="Expire_Info"
echo "<$EXPIRE_HDR>" >>$savefile
fill_in Has_Expire_Info "Y/N"
fill_in Expire_Count
fill_in Expire_Based_On
fill_in Expire_Other_Info
fill_in Expire_Month
fill_in Expire_Day
fill_in Expire_Year
echo -e "t</$EXPIRE_HDR>" >>$savefile
# END Expire_Info
clear
# More Program_Info
echo "ADDITIONAL PROGRAM INFO"
fill_in Program_Change_Info
fill_in Program_Specific_Category
fill_in Program_Categories
fill_in Includes_JAVA_VM "[Y/N]"
fill_in Includes_VB_Runtime "[Y/N]"
fill_in Includes_DirectX "[Y/N]"
# END More Program_Info
echo "</$PROGRAM_HDR>" >>$savefile
# END Program_Info
clear
# Program Description
echo "PROGRAM DESCRIPTIONS"
PROGDESC_HDR="Program_Descriptions"
echo "<$PROGDESC_HDR>" >>$savefile
LANG="English"
echo "<$LANG>" >>$savefile
fill_in Keywords "[comma + space separated]"
echo
echo "45, 80, 250, 450, 2000 word program descriptions"
echo "(may cut and paste into field)"
# It would be highly appropriate to compose the following
#+ "Char_Desc" fields with a text editor,
#+ then cut-and-paste the text into the answer fields.
echo
echo " |---------------45 characters---------------|"
fill_in Char_Desc_45
check_field_length 45 "$?"
echo
fill_in Char_Desc_80
check_field_length 80 "$?"
fill_in Char_Desc_250
check_field_length 250 "$?"
fill_in Char_Desc_450
fill_in Char_Desc_2000
echo "</$LANG>" >>$savefile
Appendix A. Contributed Scripts 680](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-686-320.jpg)
![Advanced Bash-Scripting Guide
echo "</$PROGDESC_HDR>" >>$savefile
# END Program Description
clear
echo "Done."; echo; echo
echo "Save file is: ""$savefile"""
exit 0
Example A-39. A man page editor
#!/bin/bash
# maned.sh
# A rudimentary man page editor
# Version: 0.1 (Alpha, probably buggy)
# Author: Mendel Cooper <thegrendel.abs@gmail.com>
# Reldate: 16 June 2008
# License: GPL3
savefile= # Global, used in multiple functions.
E_NOINPUT=90 # User input missing (error). May or may not be critical.
# =========== Markup Tags ============ #
TopHeader=".TH"
NameHeader=".SH NAME"
SyntaxHeader=".SH SYNTAX"
SynopsisHeader=".SH SYNOPSIS"
InstallationHeader=".SH INSTALLATION"
DescHeader=".SH DESCRIPTION"
OptHeader=".SH OPTIONS"
FilesHeader=".SH FILES"
EnvHeader=".SH ENVIRONMENT"
AuthHeader=".SH AUTHOR"
BugsHeader=".SH BUGS"
SeeAlsoHeader=".SH SEE ALSO"
BOLD=".B"
# Add more tags, as needed.
# See groff docs for markup meanings.
# ==================================== #
start ()
{
clear # Clear screen.
echo "ManEd"
echo "-----"
echo
echo "Simple man page creator"
echo "Author: Mendel Cooper"
echo; echo; echo
}
progname ()
{
echo -n "Program name? "
read name
echo -n "Manpage section? [Hit RETURN for default ("1") ] "
read section
if [ -z "$section" ]
Appendix A. Contributed Scripts 681](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-687-320.jpg)
![Advanced Bash-Scripting Guide
then
section=1 # Most man pages are in section 1.
fi
if [ -n "$name" ]
then
savefile=""$name"."$section"" # Filename suffix = section.
echo -n "$1 " >>$savefile
name1=$(echo "$name" | tr a-z A-Z) # Change to uppercase,
#+ per man page convention.
echo -n "$name1" >>$savefile
else
echo "Error! No input." # Mandatory input.
exit $E_NOINPUT # Critical!
fi
echo -n " "$section"">>$savefile # Append, always append.
echo -n "Version? "
read ver
echo -n " "Version $ver "">>$savefile
echo >>$savefile
echo -n "Short description [0 - 5 words]? "
read sdesc
echo "$NameHeader">>$savefile
echo ""$BOLD" "$name"">>$savefile
echo "- "$sdesc"">>$savefile
}
fill_in ()
{ # This function more or less copied from "pad.sh" script.
echo -n "$2? " # Get user input.
read var # May paste (a single line only!) to fill in field.
if [ -n "$var" ]
then
echo "$1 " >>$savefile
echo -n "$var" >>$savefile
else # Don't append empty field to file.
return $E_NOINPUT # Not critical here.
fi
echo >>$savefile
}
end ()
{
clear
echo -n "Would you like to view the saved man page (y/n)? "
read ans
if [ "$ans" = "n" -o "$ans" = "N" ]; then exit; fi
exec less "$savefile" # Exit script and hand off control to "less" ...
#+ ... which formats for viewing man page source.
}
# ---------------------------------------- #
start
Appendix A. Contributed Scripts 682](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-688-320.jpg)
![Advanced Bash-Scripting Guide
progname "$TopHeader"
fill_in "$SynopsisHeader" "Synopsis"
fill_in "$DescHeader" "Long description"
# May paste in *single line* of text.
fill_in "$OptHeader" "Options"
fill_in "$FilesHeader" "Files"
fill_in "$AuthHeader" "Author"
fill_in "$BugsHeader" "Bugs"
fill_in "$SeeAlsoHeader" "See also"
# fill_in "$OtherHeader" ... as necessary.
end # ... exit not needed.
# ---------------------------------------- #
# Note that the generated man page will usually
#+ require manual fine-tuning with a text editor.
# However, it's a distinct improvement upon
#+ writing man source from scratch
#+ or even editing a blank man page template.
# The main deficiency of the script is that it permits
#+ pasting only a single text line into the input fields.
# This may be a long, cobbled-together line, which groff
# will automatically wrap and hyphenate.
# However, if you want multiple (newline-separated) paragraphs,
#+ these must be inserted by manual text editing on the
#+ script-generated man page.
# Exercise (difficult): Fix this!
# This script is not nearly as elaborate as the
#+ full-featured "manedit" package (http://wolfpack.twu.net),
#+ but it's much easier to use.
Example A-40. Petals Around the Rose
#!/bin/bash -i
# petals.sh
#########################################################################
# Petals Around the Rose #
# #
# Version 0.1 Created by Serghey Rodin #
# Version 0.2 Modded by ABS Guide Author #
# #
# License: GPL3 #
# Used in ABS Guide with permission. #
# ##################################################################### #
hits=0 # Correct guesses.
WIN=6 # Mastered the game.
ALMOST=5 # One short of mastery.
EXIT=exit # Give up early?
RANDOM=$$ # Seeds the random number generator from PID of script.
# Bones (ASCII graphics for dice)
bone1[1]="| |"
bone1[2]="| o |"
bone1[3]="| o |"
bone1[4]="| o o |"
bone1[5]="| o o |"
Appendix A. Contributed Scripts 683](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-689-320.jpg)
![Advanced Bash-Scripting Guide
bone1[6]="| o o |"
bone2[1]="| o |"
bone2[2]="| |"
bone2[3]="| o |"
bone2[4]="| |"
bone2[5]="| o |"
bone2[6]="| o o |"
bone3[1]="| |"
bone3[2]="| o |"
bone3[3]="| o |"
bone3[4]="| o o |"
bone3[5]="| o o |"
bone3[6]="| o o |"
bone="+---------+"
# Functions
instructions () {
clear
echo -n "Do you need instructions? (y/n) "; read ans
if [ "$ans" = "y" -o "$ans" = "Y" ]; then
clear
echo -e 'E[34;47m' # Blue type.
# "cat document"
cat <<INSTRUCTIONSZZZ
The name of the game is Petals Around the Rose,
and that name is significant.
Five dice will roll and you must guess the "answer" for each roll.
It will be zero or an even number.
After your guess, you will be told the answer for the roll, but . . .
that's ALL the information you will get.
Six consecutive correct guesses admits you to the
Fellowship of the Rose.
INSTRUCTIONSZZZ
echo -e "033[0m" # Turn off blue.
else clear
fi
}
fortune ()
{
RANGE=7
FLOOR=0
number=0
while [ "$number" -le $FLOOR ]
do
number=$RANDOM
let "number %= $RANGE" # 1 - 6.
done
return $number
}
Appendix A. Contributed Scripts 684](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-690-320.jpg)
![Advanced Bash-Scripting Guide
throw () { # Calculate each individual die.
fortune; B1=$?
fortune; B2=$?
fortune; B3=$?
fortune; B4=$?
fortune; B5=$?
calc () { # Function embedded within a function!
case "$1" in
3 ) rose=2;;
5 ) rose=4;;
* ) rose=0;;
esac # Simplified algorithm.
# Doesn't really get to the heart of the matter.
return $rose
}
answer=0
calc "$B1"; answer=$(expr $answer + $(echo $?))
calc "$B2"; answer=$(expr $answer + $(echo $?))
calc "$B3"; answer=$(expr $answer + $(echo $?))
calc "$B4"; answer=$(expr $answer + $(echo $?))
calc "$B5"; answer=$(expr $answer + $(echo $?))
}
game ()
{ # Generate graphic display of dice throw.
throw
echo -e "033[1m" # Bold.
echo -e "n"
echo -e "$bonet$bonet$bonet$bonet$bone"
echo -e
"${bone1[$B1]}t${bone1[$B2]}t${bone1[$B3]}t${bone1[$B4]}t${bone1[$B5]}"
echo -e
"${bone2[$B1]}t${bone2[$B2]}t${bone2[$B3]}t${bone2[$B4]}t${bone2[$B5]}"
echo -e
"${bone3[$B1]}t${bone3[$B2]}t${bone3[$B3]}t${bone3[$B4]}t${bone3[$B5]}"
echo -e "$bonet$bonet$bonet$bonet$bone"
echo -e "nntt"
echo -e "033[0m" # Turn off bold.
echo -n "There are how many petals around the rose? "
}
# ============================================================== #
instructions
while [ "$petal" != "$EXIT" ] # Main loop.
do
game
read petal
echo "$petal" | grep [0-9] >/dev/null # Filter response for digit.
# Otherwise just roll dice again.
if [ "$?" -eq 0 ] # If-loop #1.
then
if [ "$petal" == "$answer" ]; then # If-loop #2.
echo -e "nCorrect. There are $petal petals around the rose.n"
Appendix A. Contributed Scripts 685](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-691-320.jpg)
![Advanced Bash-Scripting Guide
(( hits++ ))
if [ "$hits" -eq "$WIN" ]; then # If-loop #3.
echo -e 'E[31;47m' # Red type.
echo -e "033[1m" # Bold.
echo "You have unraveled the mystery of the Rose Petals!"
echo "Welcome to the Fellowship of the Rose!!!"
echo "(You are herewith sworn to secrecy.)"; echo
echo -e "033[0m" # Turn off red & bold.
break # Exit!
else echo "You have $hits correct so far."; echo
if [ "$hits" -eq "$ALMOST" ]; then
echo "Just one more gets you to the heart of the mystery!"; echo
fi
fi # Close if-loop #3.
else
echo -e "nWrong. There are $answer petals around the rose.n"
hits=0 # Reset number of correct guesses.
fi # Close if-loop #2.
echo -n "Hit ENTER for the next roll, or type "exit" to end. "
read
if [ "$REPLY" = "$EXIT" ]; then exit
fi
fi # Close if-loop #1.
clear
done # End of main (while) loop.
###
exit $?
# Resources:
# ---------
# 1) http://en.wikipedia.org/wiki/Petals_Around_the_Rose
# (Wikipedia entry.)
# 2) http://www.borrett.id.au/computing/petals-bg.htm
# (How Bill Gates coped with the Petals Around the Rose challenge.)
Example A-41. Quacky: a Perquackey-type word game
#!/bin/bash
# qky.sh
##############################################################
# QUACKEY: a somewhat simplified version of Perquackey [TM]. #
# #
# Author: Mendel Cooper <thegrendel.abs@gmail.com> #
# version 0.1.02 03 May, 2008 #
# License: GPL3 #
##############################################################
WLIST=/usr/share/dict/word.lst
# ^^^^^^^^ Word list file found here.
# ASCII word list, one word per line, UNIX format.
# A suggested list is the script author's "yawl" word list package.
Appendix A. Contributed Scripts 686](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-692-320.jpg)
![Advanced Bash-Scripting Guide
# http://bash.neuralshortciruit.com/yawl-0.3.2.tar.gz
# or
# http://ibiblio.org/pub/Linux/libs/yawl-0.3.2.tar.gz
NONCONS=0 # Word not constructable from letter set.
CONS=1 # Constructable.
SUCCESS=0
NG=1
FAILURE=''
NULL=0 # Zero out value of letter (if found).
MINWLEN=3 # Minimum word length.
MAXCAT=5 # Maximum number of words in a given category.
PENALTY=200 # General-purpose penalty for unacceptable words.
total=
E_DUP=70 # Duplicate word error.
TIMEOUT=10 # Time for word input.
NVLET=10 # 10 letters for non-vulnerable.
VULET=13 # 13 letters for vulnerable (not yet implemented).
declare -a Words
declare -a Status
declare -a Score=( 0 0 0 0 0 0 0 0 0 0 0 )
letters=( a n s r t m l k p r b c i d s i d z e w u e t f
e y e r e f e g t g h h i t r s c i t i d i j a t a o l a
m n a n o v n w o s e l n o s p a q e e r a b r s a o d s
t g t i t l u e u v n e o x y m r k )
# Letter distribution table shamelessly borrowed from "Wordy" game,
#+ ca. 1992, written by a certain fine fellow named Mendel Cooper.
declare -a LS
numelements=${#letters[@]}
randseed="$1"
instructions ()
{
clear
echo "Welcome to QUACKEY, the anagramming word construction game."; echo
echo -n "Do you need instructions? (y/n) "; read ans
if [ "$ans" = "y" -o "$ans" = "Y" ]; then
clear
echo -e 'E[31;47m' # Red foreground. 'E[34;47m' for blue.
cat <<INSTRUCTION1
QUACKEY is a variant of Perquackey [TM].
The rules are the same, but the scoring is simplified
and plurals of previously played words are allowed.
"Vulnerable" play is not yet implemented,
but it is otherwise feature-complete.
As the game begins, the player gets 10 letters.
The object is to construct valid dictionary words
of at least 3-letter-length from the letterset.
Each word-length category
-- 3-letter, 4-letter, 5-letter, ... --
fills up with the fifth word entered,
and no further words in that category are accepted.
Appendix A. Contributed Scripts 687](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-693-320.jpg)
![Advanced Bash-Scripting Guide
}
seed_random ()
{ # Seed random number generator.
if [ -n "$randseed" ] # Can specify random seed.
then #+ for play in competitive mode.
# RANDOM="$randseed"
echo "RANDOM seed set to "$randseed""
else
randseed="$$" # Or get random seed from process ID.
echo "RANDOM seed not specified, set to Process ID of script ($$)."
fi
RANDOM="$randseed"
echo
}
get_letset ()
{
element=0
echo -n "Letterset:"
for lset in $(seq $NVLET)
do # Pick random letters to fill out letterset.
LS[element]="${letters[$((RANDOM%numelements))]}"
((element++))
done
echo
echo "${LS[@]}"
}
add_word ()
{
wrd="$1"
local idx=0
Status[0]=""
Status[3]=""
Status[4]=""
while [ "${Words[idx]}" != '' ]
do
if [ "${Words[idx]}" = "$wrd" ]
then
Status[3]="Duplicate-word-PENALTY"
let "Score[0]= 0 - $PENALTY"
let "Score[1]-=$PENALTY"
return $E_DUP
fi
((idx++))
done
Words[idx]="$wrd"
Appendix A. Contributed Scripts 689](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-695-320.jpg)
![Advanced Bash-Scripting Guide
get_score
}
get_score()
{
local wlen=0
local score=0
local bonus=0
local first_word=0
local add_word=0
local numwords=0
wlen=${#wrd}
numwords=${Score[wlen]}
Score[2]=0
Status[4]="" # Initialize "bonus" to 0.
case "$wlen" in
3) first_word=60
add_word=10;;
4) first_word=120
add_word=20;;
5) first_word=200
add_word=50;;
6) first_word=300
add_word=100;;
7) first_word=500
add_word=150;;
8) first_word=750
add_word=250;;
9) first_word=1000
add_word=500;;
10) first_word=2000
add_word=2000;; # This category modified from original rules!
esac
((Score[wlen]++))
if [ ${Score[wlen]} -eq $MAXCAT ]
then # Category completion bonus scoring simplified!
case $wlen in
3 ) bonus=100;;
4 ) bonus=200;;
5 ) bonus=400;;
6 ) bonus=800;;
7 ) bonus=2000;;
8 ) bonus=10000;;
esac # Needn't worry about 9's and 10's.
Status[4]="Category-$wlen-completion***BONUS***"
Score[2]=$bonus
else
Status[4]="" # Erase it.
fi
let "score = $first_word + $add_word * $numwords"
if [ "$numwords" -eq 0 ]
then
Score[0]=$score
else
Score[0]=$add_word
fi # All this to distinguish last-word score
Appendix A. Contributed Scripts 690](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-696-320.jpg)
![Advanced Bash-Scripting Guide
#+ from total running score.
let "Score[1] += ${Score[0]}"
let "Score[1] += ${Score[2]}"
}
get_word ()
{
local wrd=''
read -t $TIMEOUT wrd # Timed read.
echo $wrd
}
is_constructable ()
{ # This was the most complex and difficult-to-write function.
local -a local_LS=( "${LS[@]}" ) # Local copy of letter set.
local is_found=0
local idx=0
local pos
local strlen
local local_word=( "$1" )
strlen=${#local_word}
while [ "$idx" -lt "$strlen" ]
do
is_found=$(expr index "${local_LS[*]}" "${local_word:idx:1}")
if [ "$is_found" -eq "$NONCONS" ] # Not constructable!
then
echo "$FAILURE"; return
else
((pos = ($is_found - 1) / 2)) # Compensate for spaces betw. letters!
local_LS[pos]=$NULL # Zero out used letters.
((idx++)) # Bump index.
fi
done
echo "$SUCCESS"
return
}
is_valid ()
{ # Surprisingly easy to check if word in dictionary ...
fgrep -qw "$1" "$WLIST" # ... thanks to 'grep' ...
echo $?
}
check_word ()
{
if [ -z "$1" ]
then
return
fi
Status[1]=""
Status[2]=""
Status[3]=""
Status[4]=""
iscons=$(is_constructable "$1")
if [ "$iscons" ]
Appendix A. Contributed Scripts 691](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-697-320.jpg)
![Advanced Bash-Scripting Guide
then
Status[1]="constructable"
v=$(is_valid "$1")
if [ "$v" -eq "$SUCCESS" ]
then
Status[2]="valid"
strlen=${#1}
if [ ${Score[strlen]} -eq "$MAXCAT" ] # Category full!
then
Status[3]="Category-$strlen-overflow-PENALTY"
return $NG
fi
case "$strlen" in
1 | 2 )
Status[3]="Two-letter-word-PENALTY"
return $NG;;
* )
Status[3]=""
return $SUCCESS;;
esac
else
Status[3]="Not-valid-PENALTY"
return $NG
fi
else
Status[3]="Not-constructable-PENALTY"
return $NG
fi
### FIXME: Streamline the above code.
}
display_words ()
{
local idx=0
local wlen0
clear
echo "Letterset: ${LS[@]}"
echo "Threes: Fours: Fives: Sixes: Sevens: Eights:"
echo "------------------------------------------------------------"
while [ "${Words[idx]}" != '' ]
do
wlen0=${#Words[idx]}
case "$wlen0" in
3) ;;
4) echo -n " " ;;
5) echo -n " " ;;
6) echo -n " " ;;
7) echo -n " " ;;
8) echo -n " " ;;
esac
echo "${Words[idx]}"
((idx++))
done
Appendix A. Contributed Scripts 692](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-698-320.jpg)
![Advanced Bash-Scripting Guide
### FIXME: The word display is pretty crude.
}
play ()
{
word="Start game" # Dummy word, to start ...
while [ "$word" ] # If player just hits return (blank word),
do #+ then game ends.
echo "$word: "${Status[@]}""
echo -n "Last score: [${Score[0]}] TOTAL score: [${Score[1]}]: Next word: "
total=${Score[1]}
word=$(get_word)
check_word "$word"
if [ "$?" -eq "$SUCCESS" ]
then
add_word "$word"
else
let "Score[0]= 0 - $PENALTY"
let "Score[1]-=$PENALTY"
fi
display_words
done # Exit game.
### FIXME: The play () function calls too many other functions.
### This is perilously close to "spaghetti code" ...
}
end_of_game ()
{ # Save and display stats.
#######################Autosave##########################
savefile=qky.save.$$
# ^^ PID of script
echo `date` >> $savefile
echo "Letterset # $randseed (random seed) ">> $savefile
echo -n "Letterset: " >> $savefile
echo "${LS[@]}" >> $savefile
echo "---------" >> $savefile
echo "Words constructed:" >> $savefile
echo "${Words[@]}" >> $savefile
echo >> $savefile
echo "Score: $total" >> $savefile
echo "Statistics for this round saved in ""$savefile"""
#########################################################
echo "Score for this round: $total"
echo "Words: ${Words[@]}"
}
# ---------#
instructions
seed_random
get_letset
play
end_of_game
# ---------#
Appendix A. Contributed Scripts 693](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-699-320.jpg)
![Advanced Bash-Scripting Guide
exit $?
# TODO:
#
# 1) Clean up code!
# 2) Prettify the display_words () function (maybe with widgets?).
# 3) Improve the time-out ... maybe change to untimed entry,
#+ but with a time limit for the overall round.
# 4) An on-screen countdown timer would be nice.
# 5) Implement "vulnerable" mode of play.
# 6) Improve save-to-file capability (and maybe make it optional).
# 7) Fix bugs!!!
# Reference for more info:
# http://bash.neuralshortcircuit.com/qky.README.html
Example A-42. Nim
#!/bin/bash
# nim.sh: Game of Nim
# Author: Mendel Cooper
# Reldate: 15 July 2008
# License: GPL3
ROWS=5 # Five rows of pegs (or matchsticks).
WON=91 # Exit codes to keep track of wins/losses.
LOST=92 # Possibly useful if running in batch mode.
QUIT=99
peg_msg= # Peg/Pegs?
Rows=( 0 5 4 3 2 1 ) # Array holding play info.
# ${Rows[0]} holds total number of pegs, updated after each turn.
# Other array elements hold number of pegs in corresponding row.
instructions ()
{
clear
tput bold
echo "Welcome to the game of Nim."; echo
echo -n "Do you need instructions? (y/n) "; read ans
if [ "$ans" = "y" -o "$ans" = "Y" ]; then
clear
echo -e 'E[33;41m' # Yellow fg., over red bg.; bold.
cat <<INSTRUCTIONS
Nim is a game with roots in the distant past.
This particular variant starts with five rows of pegs.
1: | | | | |
2: | | | |
3: | | |
4: | |
5: |
The number at the left identifies the row.
The human player moves first, and alternates turns with the bot.
A turn consists of removing at least one peg from a single row.
It is permissable to remove ALL the pegs from a row.
Appendix A. Contributed Scripts 694](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-700-320.jpg)
![Advanced Bash-Scripting Guide
For example, in row 2, above, the player can remove 1, 2, 3, or 4 pegs.
The player who removes the last peg loses.
The strategy consists of trying to be the one who removes
the next-to-last peg(s), leaving the loser with the final peg.
To exit the game early, hit ENTER during your turn.
INSTRUCTIONS
echo; echo -n "Hit ENTER to begin game. "; read azx
echo -e "033[0m" # Restore display.
else tput sgr0; clear
fi
clear
}
tally_up ()
{
let "Rows[0] = ${Rows[1]} + ${Rows[2]} + ${Rows[3]} + ${Rows[4]} +
${Rows[5]}" # Add up how many pegs remaining.
}
display ()
{
index=1 # Start with top row.
echo
while [ "$index" -le "$ROWS" ]
do
p=${Rows[index]}
echo -n "$index: " # Show row number.
# ------------------------------------------------
# Two concurrent inner loops.
indent=$index
while [ "$indent" -gt 0 ]
do
echo -n " " # Staggered rows.
((indent--)) # Spacing between pegs.
done
while [ "$p" -gt 0 ]
do
echo -n "| "
((p--))
done
# -----------------------------------------------
echo
((index++))
done
tally_up
rp=${Rows[0]}
Appendix A. Contributed Scripts 695](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-701-320.jpg)
![Advanced Bash-Scripting Guide
if [ "$rp" -eq 1 ]
then
peg_msg=peg
final_msg="Game over."
else # Game not yet over . . .
peg_msg=pegs
final_msg="" # . . . So "final message" is blank.
fi
echo " $rp $peg_msg remaining."
echo " "$final_msg""
echo
}
player_move ()
{
echo "Your move:"
echo -n "Which row? "
while read idx
do # Validity check, etc.
if [ -z "$idx" ] # Hitting return quits.
then
echo "Premature exit."; echo
tput sgr0 # Restore display.
exit $QUIT
fi
if [ "$idx" -gt "$ROWS" -o "$idx" -lt 1 ] # Bounds check.
then
echo "Invalid row number!"
echo -n "Which row? "
else
break
fi
# TODO:
# Add check for non-numeric input.
# Also, script crashes on input outside of range of long double.
# Fix this.
done
echo -n "Remove how many? "
while read num
do # Validity check.
if [ -z "$num" ]
then
echo "Premature exit."; echo
tput sgr0 # Restore display.
exit $QUIT
fi
if [ "$num" -gt ${Rows[idx]} -o "$num" -lt 1 ]
then
echo "Cannot remove $num!"
echo -n "Remove how many? "
else
Appendix A. Contributed Scripts 696](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-702-320.jpg)
![Advanced Bash-Scripting Guide
break
fi
done
# TODO:
# Add check for non-numeric input.
# Also, script crashes on input outside of range of long double.
# Fix this.
let "Rows[idx] -= $num"
display
tally_up
if [ ${Rows[0]} -eq 1 ]
then
echo " Human wins!"
echo " Congratulations!"
tput sgr0 # Restore display.
echo
exit $WON
fi
if [ ${Rows[0]} -eq 0 ]
then # Snatching defeat from the jaws of victory . . .
echo " Fool!"
echo " You just removed the last peg!"
echo " Bot wins!"
tput sgr0 # Restore display.
echo
exit $LOST
fi
}
bot_move ()
{
row_b=0
while [[ $row_b -eq 0 || ${Rows[row_b]} -eq 0 ]]
do
row_b=$RANDOM # Choose random row.
let "row_b %= $ROWS"
done
num_b=0
r0=${Rows[row_b]}
if [ "$r0" -eq 1 ]
then
num_b=1
else
let "num_b = $r0 - 1"
# Leave only a single peg in the row.
fi # Not a very strong strategy,
#+ but probably a bit better than totally random.
let "Rows[row_b] -= $num_b"
echo -n "Bot: "
echo "Removing from row $row_b ... "
if [ "$num_b" -eq 1 ]
Appendix A. Contributed Scripts 697](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-703-320.jpg)
![Advanced Bash-Scripting Guide
then
peg_msg=peg
else
peg_msg=pegs
fi
echo " $num_b $peg_msg."
display
tally_up
if [ ${Rows[0]} -eq 1 ]
then
echo " Bot wins!"
tput sgr0 # Restore display.
exit $WON
fi
}
# ================================================== #
instructions # If human player needs them . . .
tput bold # Bold characters for easier viewing.
display # Show game board.
while [ true ] # Main loop.
do # Alternate human and bot turns.
player_move
bot_move
done
# ================================================== #
# Exercise:
# --------
# Improve the bot's strategy.
# There is, in fact, a Nim strategy that can force a win.
# See the Wikipedia article on Nim: http://en.wikipedia.org/wiki/Nim
# Recode the bot to use this strategy (rather difficult).
# Curiosities:
# -----------
# Nim played a prominent role in Alain Resnais' 1961 New Wave film,
#+ Last Year at Marienbad.
#
# In 1978, Leo Christopherson wrote an animated version of Nim,
#+ Android Nim, for the TRS-80 Model I.
Example A-43. A command-line stopwatch
#!/bin/sh
# sw.sh
# A command-line Stopwatch
# Author: Pádraig Brady
# http://www.pixelbeat.org/scripts/sw
# (Minor reformatting by ABS Guide author.)
# Used in ABS Guide with script author's permission.
# Notes:
# This script starts a few processes per lap, in addition to
# the shell loop processing, so the assumption is made that
Appendix A. Contributed Scripts 698](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-704-320.jpg)
![Advanced Bash-Scripting Guide
# this takes an insignificant amount of time compared to
# the response time of humans (~.1s) (or the keyboard
# interrupt rate (~.05s)).
# '?' for splits must be entered twice if characters
# (erroneously) entered before it (on the same line).
# '?' since not generating a signal may be slightly delayed
# on heavily loaded systems.
# Lap timings on ubuntu may be slightly delayed due to:
# https://bugs.launchpad.net/bugs/62511
# Changes:
# V1.0, 23 Aug 2005, Initial release
# V1.1, 26 Jul 2007, Allow both splits and laps from single invocation.
# Only start timer after a key is pressed.
# Indicate lap number
# Cache programs at startup so there is less error
# due to startup delays.
# V1.2, 01 Aug 2007, Work around `date` commands that don't have
# nanoseconds.
# Use stty to change interrupt keys to space for
# laps etc.
# Ignore other input as it causes problems.
# V1.3, 01 Aug 2007, Testing release.
# V1.4, 02 Aug 2007, Various tweaks to get working under ubuntu
# and Mac OS X.
# V1.5, 27 Jun 2008, set LANG=C as got vague bug report about it.
export LANG=C
ulimit -c 0 # No coredumps from SIGQUIT.
trap '' TSTP # Ignore Ctrl-Z just in case.
save_tty=`stty -g` && trap "stty $save_tty" EXIT # Restore tty on exit.
stty quit ' ' # Space for laps rather than Ctrl-.
stty eof '?' # ? for splits rather than Ctrl-D.
stty -echo # Don't echo input.
cache_progs() {
stty > /dev/null
date > /dev/null
grep . < /dev/null
(echo "import time" | python) 2> /dev/null
bc < /dev/null
sed '' < /dev/null
printf '1' > /dev/null
/usr/bin/time false 2> /dev/null
cat < /dev/null
}
cache_progs # To minimise startup delay.
date +%s.%N | grep -qF 'N' && use_python=1 # If `date` lacks nanoseconds.
now() {
if [ "$use_python" ]; then
echo "import time; print time.time()" 2>/dev/null | python
else
printf "%.2f" `date +%s.%N`
fi
}
fmt_seconds() {
seconds=$1
mins=`echo $seconds/60 | bc`
if [ "$mins" != "0" ]; then
seconds=`echo "$seconds - ($mins*60)" | bc`
Appendix A. Contributed Scripts 699](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-705-320.jpg)
![Advanced Bash-Scripting Guide
echo "$mins:$seconds"
else
echo "$seconds"
fi
}
total() {
end=`now`
total=`echo "$end - $start" | bc`
fmt_seconds $total
}
stop() {
[ "$lapped" ] && lap "$laptime" "display"
total
exit
}
lap() {
laptime=`echo "$1" | sed -n 's/.*real[^0-9.]*(.*)/1/p'`
[ ! "$laptime" -o "$laptime" = "0.00" ] && return
# Signals too frequent.
laptotal=`echo $laptime+0$laptotal | bc`
if [ "$2" = "display" ]; then
lapcount=`echo 0$lapcount+1 | bc`
laptime=`fmt_seconds $laptotal`
echo $laptime "($lapcount)"
lapped="true"
laptotal="0"
fi
}
echo -n "Space for lap | ? for split | Ctrl-C to stop | Space to start...">&2
while true; do
trap true INT QUIT # Set signal handlers.
laptime=`/usr/bin/time -p 2>&1 cat >/dev/null`
ret=$?
trap '' INT QUIT # Ignore signals within this script.
if [ $ret -eq 1 -o $ret -eq 2 -o $ret -eq 130 ]; then # SIGINT = stop
[ ! "$start" ] && { echo >&2; exit; }
stop
elif [ $ret -eq 3 -o $ret -eq 131 ]; then # SIGQUIT = lap
if [ ! "$start" ]; then
start=`now` || exit 1
echo >&2
continue
fi
lap "$laptime" "display"
else # eof = split
[ ! "$start" ] && continue
total
lap "$laptime" # Update laptotal.
fi
done
exit $?
Example A-44. An all-purpose shell scripting homework assignment solution
#!/bin/bash
Appendix A. Contributed Scripts 700](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-706-320.jpg)
![Advanced Bash-Scripting Guide
# homework.sh: All-purpose homework assignment solution.
# Author: M. Leo Cooper
# If you substitute your own name as author, then it is plagiarism,
#+ possibly a lesser sin than cheating on your homework!
# License: Public Domain
# This script may be turned in to your instructor
#+ in fulfillment of ALL shell scripting homework assignments.
# It's sparsely commented, but you, the student, can easily remedy that.
# The script author repudiates all responsibility!
DLA=1
P1=2
P2=4
P3=7
PP1=0
PP2=8
MAXL=9
E_LZY=99
declare -a L
L[0]="3 4 0 17 29 8 13 18 19 17 20 2 19 14 17 28"
L[1]="8 29 12 14 18 19 29 4 12 15 7 0 19 8 2 0 11 11 24 29 17 4 6 17 4 19"
L[2]="29 19 7 0 19 29 8 29 7 0 21 4 29 13 4 6 11 4 2 19 4 3"
L[3]="19 14 29 2 14 12 15 11 4 19 4 29 19 7 8 18 29"
L[4]="18 2 7 14 14 11 22 14 17 10 29 0 18 18 8 6 13 12 4 13 19 26"
L[5]="15 11 4 0 18 4 29 0 2 2 4 15 19 29 12 24 29 7 20 12 1 11 4 29"
L[6]="4 23 2 20 18 4 29 14 5 29 4 6 17 4 6 8 14 20 18 29"
L[7]="11 0 25 8 13 4 18 18 27"
L[8]="0 13 3 29 6 17 0 3 4 29 12 4 29 0 2 2 14 17 3 8 13 6 11 24 26"
L[9]="19 7 0 13 10 29 24 14 20 26"
declare -a
alph=( A B C D E F G H I J K L M N O P Q R S T U V W X Y Z . , : ' ' )
pt_lt ()
{
echo -n "${alph[$1]}"
echo -n -e "a"
sleep $DLA
}
b_r ()
{
echo -e 'E[31;48m033[1m'
}
cr ()
{
echo -e "a"
sleep $DLA
}
restore ()
{
echo -e '033[0m' # Bold off.
tput sgr0 # Normal.
}
p_l ()
Appendix A. Contributed Scripts 701](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-707-320.jpg)
![Advanced Bash-Scripting Guide
{
for ltr in $1
do
pt_lt "$ltr"
done
}
# ----------------------
b_r
for i in $(seq 0 $MAXL)
do
p_l "${L[i]}"
if [[ "$i" -eq "$P1" || "$i" -eq "$P2" || "$i" -eq "$P3" ]]
then
cr
elif [[ "$i" -eq "$PP1" || "$i" -eq "$PP2" ]]
then
cr; cr
fi
done
restore
# ----------------------
echo
exit $E_LZY
# A typical example of an obfuscated script that is difficult
#+ to understand, and frustrating to maintain.
# In your career as a sysadmin, you'll run into these critters
#+ all too often.
Example A-45. The Knight's Tour
#!/bin/bash
# ktour.sh
# author: mendel cooper
# reldate: 12 Jan 2009
# license: public domain
# (Not much sense GPLing something that's pretty much in the common
#+ domain anyhow.)
###################################################################
# The Knight's Tour, a classic problem. #
# ===================================== #
# The knight must move onto every square of the chess board, #
# but cannot revisit any square he has already visited. #
# #
# And just why is Sir Knight unwelcome for a return visit? #
# Could it be that he has a habit of partying into the wee hours #
#+ of the morning? #
# Possibly he leaves pizza crusts in the bed, empty beer bottles #
#+ all over the floor, and clogs the plumbing. . . . #
# #
# ------------------------------------------------------------- #
# #
# Usage: ktour.sh [start-square] [stupid] #
Appendix A. Contributed Scripts 702](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-708-320.jpg)
![Advanced Bash-Scripting Guide
# #
# Note that start-square can be a square number #
#+ in the range 0 - 63 ... or #
# a square designator in conventional chess notation, #
# such as a1, f5, h3, etc. #
# #
# If start-square-number not supplied, #
#+ then starts on a random square somewhere on the board. #
# #
# "stupid" as second parameter sets the stupid strategy. #
# #
# Examples: #
# ktour.sh 23 starts on square #23 (h3) #
# ktour.sh g6 stupid starts on square #46, #
# using "stupid" (non-Warnsdorff) strategy. #
###################################################################
DEBUG= # Set this to echo debugging info to stdout.
SUCCESS=0
FAIL=99
BADMOVE=-999
FAILURE=1
LINELEN=21 # How many moves to display per line.
# ---------------------------------------- #
# Board array params
ROWS=8 # 8 x 8 board.
COLS=8
let "SQUARES = $ROWS * $COLS"
let "MAX = $SQUARES - 1"
MIN=0
# 64 squares on board, indexed from 0 to 63.
VISITED=1
UNVISITED=-1
UNVSYM="##"
# ---------------------------------------- #
# Global variables.
startpos= # Starting position (square #, 0 - 63).
currpos= # Current position.
movenum= # Move number.
CRITPOS=37 # Have to patch for f5 starting position!
declare -i board
# Use a one-dimensional array to simulate a two-dimensional one.
# This can make life difficult and result in ugly kludges; see below.
declare -i moves # Offsets from current knight position.
initialize_board ()
{
local idx
for idx in {0..63}
do
board[$idx]=$UNVISITED
done
}
print_board ()
{
Appendix A. Contributed Scripts 703](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-709-320.jpg)
![Advanced Bash-Scripting Guide
local idx
echo " _____________________________________"
for row in {7..0} # Reverse order of rows ...
do #+ so it prints in chessboard order.
let "rownum = $row + 1" # Start numbering rows at 1.
echo -n "$rownum |" # Mark board edge with border and
for column in {0..7} #+ "algebraic notation."
do
let "idx = $ROWS*$row + $column"
if [ ${board[idx]} -eq $UNVISITED ]
then
echo -n "$UNVSYM " ##
else # Mark square with move number.
printf "%02d " "${board[idx]}"; echo -n " "
fi
done
echo -e -n "bbb|" # b is a backspace.
echo # -e enables echoing escaped chars.
done
echo " -------------------------------------"
echo " a b c d e f g h"
}
failure()
{ # Whine, then bail out.
echo
print_board
echo
echo " Waah!!! Ran out of squares to move to!"
echo -n " Knight's Tour attempt ended"
echo " on $(to_algebraic $currpos) [square #$currpos]"
echo " after just $movenum moves!"
echo
exit $FAIL
}
xlat_coords () # Translate x/y coordinates to board position
{ #+ (board-array element #).
# For user input of starting board position as x/y coords.
# This function not used in initial release of ktour.sh.
# May be used in an updated version, for compatibility with
#+ standard implementation of the Knight's Tour in C, Python, etc.
if [ -z "$1" -o -z "$2" ]
then
return $FAIL
fi
local xc=$1
local yc=$2
let "board_index = $xc * $ROWS + yc"
if [ $board_index -lt $MIN -o $board_index -gt $MAX ]
then
return $FAIL # Strayed off the board!
else
Appendix A. Contributed Scripts 704](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-710-320.jpg)
![Advanced Bash-Scripting Guide
return $board_index
fi
}
to_algebraic () # Translate board position (board-array element #)
{ #+ to standard algebraic notation used by chess players.
if [ -z "$1" ]
then
return $FAIL
fi
local element_no=$1 # Numerical board position.
local col_arr=( a b c d e f g h )
local row_arr=( 1 2 3 4 5 6 7 8 )
let "row_no = $element_no / $ROWS"
let "col_no = $element_no % $ROWS"
t1=${col_arr[col_no]}; t2=${row_arr[row_no]}
local apos=$t1$t2 # Concatenate.
echo $apos
}
from_algebraic () # Translate standard algebraic chess notation
{ #+ to numerical board position (board-array element #).
# Or recognize numerical input & return it unchanged.
if [ -z "$1" ]
then
return $FAIL
fi # If no command-line arg, then will default to random start pos.
local ix
local ix_count=0
local b_index # Board index [0-63]
local alpos="$1"
arow=${alpos:0:1} # position = 0, length = 1
acol=${alpos:1:1}
if [[ $arow =~ [[:digit:]] ]] # Numerical input?
then # POSIX char class
if [[ $acol =~ [[:alpha:]] ]] # Number followed by a letter? Illegal!
then return $FAIL
else if [ $alpos -gt $MAX ] # Off board?
then return $FAIL
else return $alpos # Return digit(s) unchanged . . .
fi #+ if within range.
fi
fi
if [[ $acol -eq $MIN || $acol -gt $ROWS ]]
then # Outside of range 1 - 8?
return $FAIL
fi
for ix in a b c d e f g h
do # Convert column letter to column number.
if [ "$arow" = "$ix" ]
then
Appendix A. Contributed Scripts 705](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-711-320.jpg)
![Advanced Bash-Scripting Guide
break
fi
((ix_count++)) # Find index count.
done
((acol--)) # Decrementing converts to zero-based array.
let "b_index = $ix_count + $acol * $ROWS"
if [ $b_index -gt $MAX ] # Off board?
then
return $FAIL
fi
return $b_index
}
generate_moves () # Calculate all valid knight moves,
{ #+ relative to current position ($1),
#+ and store in ${moves} array.
local kt_hop=1 # One square :: short leg of knight move.
local kt_skip=2 # Two squares :: long leg of knight move.
local valmov=0 # Valid moves.
local row_pos; let "row_pos = $1 % $COLS"
let "move1 = -$kt_skip + $ROWS" # 2 sideways to-the-left, 1 up
if [[ `expr $row_pos - $kt_skip` -lt $MIN ]] # An ugly, ugly kludge!
then # Can't move off board.
move1=$BADMOVE # Not even temporarily.
else
((valmov++))
fi
let "move2 = -$kt_hop + $kt_skip * $ROWS" # 1 sideways to-the-left, 2 up
if [[ `expr $row_pos - $kt_hop` -lt $MIN ]] # Kludge continued ...
then
move2=$BADMOVE
else
((valmov++))
fi
let "move3 = $kt_hop + $kt_skip * $ROWS" # 1 sideways to-the-right, 2 up
if [[ `expr $row_pos + $kt_hop` -ge $COLS ]]
then
move3=$BADMOVE
else
((valmov++))
fi
let "move4 = $kt_skip + $ROWS" # 2 sideways to-the-right, 1 up
if [[ `expr $row_pos + $kt_skip` -ge $COLS ]]
then
move4=$BADMOVE
else
((valmov++))
fi
let "move5 = $kt_skip - $ROWS" # 2 sideways to-the-right, 1 dn
if [[ `expr $row_pos + $kt_skip` -ge $COLS ]]
then
move5=$BADMOVE
else
((valmov++))
fi
Appendix A. Contributed Scripts 706](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-712-320.jpg)
![Advanced Bash-Scripting Guide
let "move6 = $kt_hop - $kt_skip * $ROWS" # 1 sideways to-the-right, 2 dn
if [[ `expr $row_pos + $kt_hop` -ge $COLS ]]
then
move6=$BADMOVE
else
((valmov++))
fi
let "move7 = -$kt_hop - $kt_skip * $ROWS" # 1 sideways to-the-left, 2 dn
if [[ `expr $row_pos - $kt_hop` -lt $MIN ]]
then
move7=$BADMOVE
else
((valmov++))
fi
let "move8 = -$kt_skip - $ROWS" # 2 sideways to-the-left, 1 dn
if [[ `expr $row_pos - $kt_skip` -lt $MIN ]]
then
move8=$BADMOVE
else
((valmov++))
fi # There must be a better way to do this.
local m=( $valmov $move1 $move2 $move3 $move4 $move5 $move6 $move7 $move8 )
# ${moves[0]} = number of valid moves.
# ${moves[1]} ... ${moves[8]} = possible moves.
echo "${m[*]}" # Elements of array to stdout for capture in a var.
}
is_on_board () # Is position actually on the board?
{
if [[ "$1" -lt "$MIN" || "$1" -gt "$MAX" ]]
then
return $FAILURE
else
return $SUCCESS
fi
}
do_move () # Move the knight!
{
local valid_moves=0
local aapos
currposl="$1"
lmin=$ROWS
iex=0
squarel=
mpm=
mov=
declare -a p_moves
########################## DECIDE-MOVE #############################
if [ $startpos -ne $CRITPOS ]
then # CRITPOS = square #37
decide_move
else # Needs a special patch for startpos=37 !!!
decide_move_patched # Why this particular move and no other ???
fi
Appendix A. Contributed Scripts 707](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-713-320.jpg)
![Advanced Bash-Scripting Guide
####################################################################
(( ++movenum )) # Increment move count.
let "square = $currposl + ${moves[iex]}"
################## DEBUG ###############
if [ "$DEBUG" ]
then debug # Echo debugging information.
fi
##############################################
if [[ "$square" -gt $MAX || "$square" -lt $MIN ||
${board[square]} -ne $UNVISITED ]]
then
(( --movenum )) # Decrement move count,
echo "RAN OUT OF SQUARES!!!" #+ since previous one was invalid.
return $FAIL
fi
board[square]=$movenum
currpos=$square # Update current position.
((valid_moves++)); # moves[0]=$valid_moves
aapos=$(to_algebraic $square)
echo -n "$aapos "
test $(( $Moves % $LINELEN )) -eq 0 && echo
# Print LINELEN=21 moves per line. A valid tour shows 3 complete lines.
return $valid_moves # Found a square to move to!
}
do_move_stupid() # Dingbat algorithm,
{ #+ courtesy of script author, *not* Warnsdorff.
local valid_moves=0
local movloc
local squareloc
local aapos
local cposloc="$1"
for movloc in {1..8}
do # Move to first-found unvisited square.
let "squareloc = $cposloc + ${moves[movloc]}"
is_on_board $squareloc
if [ $? -eq $SUCCESS ] && [ ${board[squareloc]} -eq $UNVISITED ]
then # Add conditions to above if-test to improve algorithm.
(( ++movenum ))
board[squareloc]=$movenum
currpos=$squareloc # Update current position.
((valid_moves++)); # moves[0]=$valid_moves
aapos=$(to_algebraic $squareloc)
echo -n "$aapos "
test $(( $Moves % $LINELEN )) -eq 0 && echo # Print 21 moves/line.
return $valid_moves # Found a square to move to!
fi
done
return $FAIL
# If no square found in all 8 loop iterations,
#+ then Knight's Tour attempt ends in failure.
# Dingbat algorithm will typically fail after about 30 - 40 moves,
#+ but executes _much_ faster than Warnsdorff's in do_move() function.
Appendix A. Contributed Scripts 708](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-714-320.jpg)
![Advanced Bash-Scripting Guide
}
decide_move () # Which move will we make?
{ # But, fails on startpos=37 !!!
for mov in {1..8}
do
let "squarel = $currposl + ${moves[mov]}"
is_on_board $squarel
if [[ $? -eq $SUCCESS && ${board[squarel]} -eq $UNVISITED ]]
then # Find accessible square with least possible future moves.
# This is Warnsdorff's algorithm.
# What happens is that the knight wanders toward the outer edge
#+ of the board, then pretty much spirals inward.
# Given two or more possible moves with same value of
#+ least-possible-future-moves, this implementation chooses
#+ the _first_ of those moves.
# This means that there is not necessarily a unique solution
#+ for any given starting position.
possible_moves $squarel
mpm=$?
p_moves[mov]=$mpm
if [ $mpm -lt $lmin ] # If less than previous minimum ...
then # ^^
lmin=$mpm # Update minimum.
iex=$mov # Save index.
fi
fi
done
}
decide_move_patched () # Decide which move to make,
{ # ^^^^^^^ #+ but only if startpos=37 !!!
for mov in {1..8}
do
let "squarel = $currposl + ${moves[mov]}"
is_on_board $squarel
if [[ $? -eq $SUCCESS && ${board[squarel]} -eq $UNVISITED ]]
then
possible_moves $squarel
mpm=$?
p_moves[mov]=$mpm
if [ $mpm -le $lmin ] # If less-than-or equal to prev. minimum!
then # ^^
lmin=$mpm
iex=$mov
fi
fi
done # There has to be a better way to do this.
}
possible_moves () # Calculate number of possible moves,
Appendix A. Contributed Scripts 709](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-715-320.jpg)
![Advanced Bash-Scripting Guide
{ #+ given the current position.
if [ -z "$1" ]
then
return $FAIL
fi
local curr_pos=$1
local valid_movl=0
local icx=0
local movl
local sq
declare -a movesloc
movesloc=( $(generate_moves $curr_pos) )
for movl in {1..8}
do
let "sq = $curr_pos + ${movesloc[movl]}"
is_on_board $sq
if [ $? -eq $SUCCESS ] && [ ${board[sq]} -eq $UNVISITED ]
then
((valid_movl++));
fi
done
return $valid_movl # Found a square to move to!
}
strategy ()
{
echo
if [ -n "$STUPID" ]
then
for Moves in {1..63}
do
cposl=$1
moves=( $(generate_moves $currpos) )
do_move_stupid "$currpos"
if [ $? -eq $FAIL ]
then
failure
fi
done
fi
# Don't need an "else" clause here,
#+ because Stupid Strategy will always fail and exit!
for Moves in {1..63}
do
cposl=$1
moves=( $(generate_moves $currpos) )
do_move "$currpos"
if [ $? -eq $FAIL ]
then
failure
fi
done
# Could have condensed above two do-loops into a single one,
Appendix A. Contributed Scripts 710](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-716-320.jpg)
![Advanced Bash-Scripting Guide
echo #+ but this would have slowed execution.
print_board
echo
echo "Knight's Tour ends on $(to_algebraic $currpos) [square #$currpos]."
return $SUCCESS
}
debug ()
{ # Enable this by setting DEBUG=1 near beginning of script.
local n
echo "================================="
echo " At move number $movenum:"
echo " *** possible moves = $mpm ***"
# echo "### square = $square ###"
echo "lmin = $lmin"
echo "${moves[@]}"
for n in {1..8}
do
echo -n "($n):${p_moves[n]} "
done
echo
echo "iex = $iex :: moves[iex] = ${moves[iex]}"
echo "square = $square"
echo "================================="
echo
} # Gives pretty complete status after ea. move.
# =============================================================== #
# int main () {
from_algebraic "$1"
startpos=$?
if [ "$startpos" -eq "$FAIL" ] # Okay even if no $1.
then # ^^^^^^^^^^^ Okay even if input -lt 0.
echo "No starting square specified (or illegal input)."
let "startpos = $RANDOM % $SQUARES" # 0 - 63 permissable range.
fi
if [ "$2" = "stupid" ]
then
STUPID=1
echo -n " ### Stupid Strategy ###"
else
STUPID=''
echo -n " *** Warnsdorff's Algorithm ***"
fi
initialize_board
movenum=0
board[startpos]=$movenum # Mark each board square with move number.
currpos=$startpos
algpos=$(to_algebraic $startpos)
echo; echo "Starting from $algpos [square #$startpos] ..."; echo
Appendix A. Contributed Scripts 711](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-717-320.jpg)
![Advanced Bash-Scripting Guide
{
echo "Usage: $0 square-size"
echo " ... where "square-size" is an ODD integer"
echo " in the range 3 - 31."
# Actually works for squares up to order 159,
#+ but large squares will not display pretty-printed in a term window.
# Try increasing MAXSIZE, above.
exit $E_usage
}
calculate () # Here's where the actual work gets done.
{
local row col index dimadj j k cell_val=1
dimension=$1
let "dimadj = $dimension * 3"; let "dimadj /= 2" # x 1.5, then truncate.
for ((j=0; j < dimension; j++))
do
for ((k=0; k < dimension; k++))
do # Calculate indices, then convert to 1-dim. array index.
# Bash doesn't support multidimensional arrays. Pity.
let "col = $k - $j + $dimadj"; let "col %= $dimension"
let "row = $j * 2 - $k + $dimension"; let "row %= $dimension"
let "index = $row*($dimension) + $col"
square[$index]=cell_val; ((cell_val++))
done
done
} # Plain math, no visualization required.
print_square () # Output square, one row at a time.
{
local row col idx d1
let "d1 = $dimension - 1" # Adjust for zero-indexed array.
for row in $(seq 0 $d1)
do
for col in $(seq 0 $d1)
do
let "idx = $row * $dimension + $col"
printf "%3d " "${square[idx]}"; echo -n " "
done # Displays up to 13-order neatly in 80-column term window.
echo # Newline after each row.
done
}
#################################################
if [[ -z "$1" ]] || [[ "$1" -gt $MAXSIZE ]]
then
usage_message
fi
let "test_even = $1 % $EVEN"
if [ $test_even -eq 0 ]
then # Can't handle even-order squares.
usage_message
fi
Appendix A. Contributed Scripts 713](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-719-320.jpg)
![Advanced Bash-Scripting Guide
calculate $1
print_square # echo "${square[@]}" # DEBUG
exit $?
#################################################
# Exercises:
# ---------
# 1) Add a function to calculate the sum of each row, column,
# and *long* diagonal. The sums must match.
# This is the "magic constant" of that particular order square.
# 2) Have the print_square function auto-calculate how much space
# to allot between square elements for optimized display.
# This might require parameterizing the "printf" line.
# 3) Add appropriate functions for generating magic squares
# with an *even* number of rows/columns.
# This is non-trivial(!).
# See the URL for Kwon Young Shin, above, for help.
Example A-47. Fifteen Puzzle
#!/bin/bash
# fifteen.sh
# Classic "Fifteen Puzzle"
# Author: Antonio Macchi
# Lightly edited and commented by ABS Guide author.
# Used in ABS Guide with permission. (Thanks!)
# The invention of the Fifteen Puzzle is attributed to either
#+ Sam Loyd or Noyes Palmer Chapman.
# The puzzle was wildly popular in the late 19th-century.
# Object: Rearrange the numbers so they read in order,
#+ from 1 - 15: ________________
# | 1 2 3 4 |
# | 5 6 7 8 |
# | 9 10 11 12 |
# | 13 14 15 |
# ----------------
#######################
# Constants #
SQUARES=16 #
FAIL=70 #
E_PREMATURE_EXIT=80 #
#######################
########
# Data #
########
Puzzle=( 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 " " )
#############
# Functions #
Appendix A. Contributed Scripts 714](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-720-320.jpg)
![Advanced Bash-Scripting Guide
#############
function swap
{
local tmp
tmp=${Puzzle[$1]}
Puzzle[$1]=${Puzzle[$2]}
Puzzle[$2]=$tmp
}
function Jumble
{ # Scramble the pieces at beginning of round.
local i pos1 pos2
for i in {1..100}
do
pos1=$(( $RANDOM % $SQUARES))
pos2=$(( $RANDOM % $SQUARES ))
swap $pos1 $pos2
done
}
function PrintPuzzle
{
local i1 i2 puzpos
puzpos=0
clear
echo "Enter quit to exit."; echo # Better that than Ctl-C.
echo ",----.----.----.----." # Top border.
for i1 in {1..4}
do
for i2 in {1..4}
do
printf "| %2s " "${Puzzle[$puzpos]}"
(( puzpos++ ))
done
echo "|" # Right-side border.
test $i1 = 4 || echo "+----+----+----+----+"
done
echo "'----'----'----'----'" # Bottom border.
}
function GetNum
{ # Test for valid input.
local puznum garbage
while true
do
echo "Moves: $moves" # Also counts invalid moves.
read -p "Number to move: " puznum garbage
if [ "$puznum" = "quit" ]; then echo; exit $E_PREMATURE_EXIT; fi
test -z "$puznum" -o -n "${puznum//[0-9]/}" && continue
test $puznum -gt 0 -a $puznum -lt $SQUARES && break
done
return $puznum
}
Appendix A. Contributed Scripts 715](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-721-320.jpg)
![Advanced Bash-Scripting Guide
function GetPosFromNum
{ # $1 = puzzle-number
local puzpos
for puzpos in {0..15}
do
test "${Puzzle[$puzpos]}" = "$1" && break
done
return $puzpos
}
function Move
{ # $1=Puzzle-pos
test $1 -gt 3 && test "${Puzzle[$(( $1 - 4 ))]}" = " "
&& swap $1 $(( $1 - 4 )) && return 0
test $(( $1%4 )) -ne 3 && test "${Puzzle[$(( $1 + 1 ))]}" = " "
&& swap $1 $(( $1 + 1 )) && return 0
test $1 -lt 12 && test "${Puzzle[$(( $1 + 4 ))]}" = " "
&& swap $1 $(( $1 + 4 )) && return 0
test $(( $1%4 )) -ne 0 && test "${Puzzle[$(( $1 - 1 ))]}" = " " &&
swap $1 $(( $1 - 1 )) && return 0
return 1
}
function Solved
{
local pos
for pos in {0..14}
do
test "${Puzzle[$pos]}" = $(( $pos + 1 )) || return $FAIL
# Check whether number in each square = square number.
done
return 0 # Successful solution.
}
################### MAIN () ########################
moves=0
Jumble
while true # Loop continuously until puzzle solved.
do
echo; echo
PrintPuzzle
echo
while true
do
GetNum
puznum=$?
GetPosFromNum $puznum
puzpos=$?
((moves++))
Move $puzpos && break
done
Solved && break
done
Appendix A. Contributed Scripts 716](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-722-320.jpg)
![Advanced Bash-Scripting Guide
for (( n=0; n<$2; n++ )); do
echo -n "$1"
done
}
function FromRod {
local rod summit weight sequence
while true; do
rod=$1
test ${rod/[^123]/} || continue
sequence=$(echo $(seq 0 $disks1 | tac))
for summit in $sequence; do
eval weight=${Rod${rod}[$summit]}
test $weight -ne 0 &&
{ echo "$rod $summit $weight"; return; }
done
done
}
function ToRod { # $1=previous (FromRod) weight
local rod firstfree weight sequence
while true; do
rod=$2
test ${rod/[^123]} || continue
sequence=$(echo $(seq 0 $disks1 | tac))
for firstfree in $sequence; do
eval weight=${Rod${rod}[$firstfree]}
test $weight -gt 0 && { (( firstfree++ )); break; }
done
test $weight -gt $1 -o $firstfree = 0 &&
{ echo "$rod $firstfree"; return; }
done
}
function PrintRods {
local disk rod empty fill sp sequence
repeat " " $spaces1
echo -n "|"
repeat " " $spaces2
echo -n "|"
repeat " " $spaces2
echo "|"
sequence=$(echo $(seq 0 $disks1 | tac))
for disk in $sequence; do
for rod in {1..3}; do
eval empty=$(( $DISKS - (Rod${rod}[$disk] / 2) ))
eval fill=${Rod${rod}[$disk]}
repeat " " $empty
test $fill -gt 0 && repeat "*" $fill || echo -n "|"
repeat " " $empty
done
echo
Appendix A. Contributed Scripts 718](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-724-320.jpg)
![Advanced Bash-Scripting Guide
done
repeat "=" $basewidth # Print "base" beneath rods.
echo
}
display ()
{
echo
PrintRods
# Get rod-number, summit and weight
first=( `FromRod $1` )
eval Rod${first[0]}[${first[1]}]=0
# Get rod-number and first-free position
second=( `ToRod ${first[2]} $2` )
eval Rod${second[0]}[${second[1]}]=${first[2]}
echo; echo; echo
if [ "${Rod3[lastmove_t]}" = 1 ]
then # Last move? If yes, then display final position.
echo "+ Final Position: $Moves moves"; echo
PrintRods
fi
}
# From here down, almost the same as original (hanoi.bash) script.
dohanoi() { # Recursive function.
case $1 in
0)
;;
*)
dohanoi "$(($1-1))" $2 $4 $3
if [ "$Moves" -ne 0 ]
then
echo "+ Position after move $Moves"
fi
((Moves++))
echo -n " Next move will be: "
echo $2 "-->" $3
display $2 $3
dohanoi "$(($1-1))" $4 $3 $2
;;
esac
}
setup_arrays ()
{
local dim n elem
let "dim1 = $1 - 1"
elem=$dim1
for n in $(seq 0 $dim1)
do
let "Rod1[$elem] = 2 * $n + 1"
Rod2[$n]=0
Appendix A. Contributed Scripts 719](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-725-320.jpg)
![Advanced Bash-Scripting Guide
Rod3[$n]=0
((elem--))
done
}
### Main ###
setup_arrays $DISKS
echo; echo "+ Start Position"
case $# in
1) case $(($1>0)) in # Must have at least one disk.
1)
disks=$1
dohanoi $1 1 3 2
# Total moves = 2^n - 1, where n = number of disks.
echo
exit 0;
;;
*)
echo "$0: Illegal value for number of disks";
exit $E_BADPARAM;
;;
esac
;;
*)
clear
echo "usage: $0 N"
echo " Where "N" is the number of disks."
exit $E_NOPARAM;
;;
esac
exit $E_NOEXIT # Shouldn't exit here.
# Note:
# Redirect script output to a file, otherwise it scrolls off display.
Example A-49. The Towers of Hanoi, alternate graphic version
#! /bin/bash
# The Towers Of Hanoi
# Original script (hanoi.bash) copyright (C) 2000 Amit Singh.
# All Rights Reserved.
# http://hanoi.kernelthread.com
# hanoi2.bash
# Version 2: modded for ASCII-graphic display.
# Uses code contributed by Antonio Macchi,
#+ with heavy editing by ABS Guide author.
# This variant also falls under the original copyright, see above.
# Used in ABS Guide with Amit Singh's permission (thanks!).
# Variables #
E_NOPARAM=86
E_BADPARAM=87 # Illegal no. of disks passed to script.
E_NOEXIT=88
DELAY=2 # Interval, in seconds, between moves. Change, if desired.
Appendix A. Contributed Scripts 720](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-726-320.jpg)
![Advanced Bash-Scripting Guide
DISKS=$1
Moves=0
MWIDTH=7
MARGIN=2
# Arbitrary "magic" constants, work okay for relatively small # of disks.
# BASEWIDTH=51 # Original code.
let "basewidth = $MWIDTH * $DISKS + $MARGIN" # "Base" beneath rods.
# Above "algorithm" could likely stand improvement.
# Display variables.
let "disks1 = $DISKS - 1"
let "spaces1 = $DISKS"
let "spaces2 = 2 * $DISKS"
let "lastmove_t = $DISKS - 1" # Final move?
declare -a Rod1 Rod2 Rod3
#################
function repeat { # $1=char $2=number of repetitions
local n # Repeat-print a character.
for (( n=0; n<$2; n++ )); do
echo -n "$1"
done
}
function FromRod {
local rod summit weight sequence
while true; do
rod=$1
test ${rod/[^123]/} || continue
sequence=$(echo $(seq 0 $disks1 | tac))
for summit in $sequence; do
eval weight=${Rod${rod}[$summit]}
test $weight -ne 0 &&
{ echo "$rod $summit $weight"; return; }
done
done
}
function ToRod { # $1=previous (FromRod) weight
local rod firstfree weight sequence
while true; do
rod=$2
test ${rod/[^123]} || continue
sequence=$(echo $(seq 0 $disks1 | tac))
for firstfree in $sequence; do
eval weight=${Rod${rod}[$firstfree]}
test $weight -gt 0 && { (( firstfree++ )); break; }
done
test $weight -gt $1 -o $firstfree = 0 &&
{ echo "$rod $firstfree"; return; }
Appendix A. Contributed Scripts 721](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-727-320.jpg)
![Advanced Bash-Scripting Guide
done
}
function PrintRods {
local disk rod empty fill sp sequence
tput cup 5 0
repeat " " $spaces1
echo -n "|"
repeat " " $spaces2
echo -n "|"
repeat " " $spaces2
echo "|"
sequence=$(echo $(seq 0 $disks1 | tac))
for disk in $sequence; do
for rod in {1..3}; do
eval empty=$(( $DISKS - (Rod${rod}[$disk] / 2) ))
eval fill=${Rod${rod}[$disk]}
repeat " " $empty
test $fill -gt 0 && repeat "*" $fill || echo -n "|"
repeat " " $empty
done
echo
done
repeat "=" $basewidth # Print "base" beneath rods.
echo
}
display ()
{
echo
PrintRods
# Get rod-number, summit and weight
first=( `FromRod $1` )
eval Rod${first[0]}[${first[1]}]=0
# Get rod-number and first-free position
second=( `ToRod ${first[2]} $2` )
eval Rod${second[0]}[${second[1]}]=${first[2]}
if [ "${Rod3[lastmove_t]}" = 1 ]
then # Last move? If yes, then display final position.
tput cup 0 0
echo; echo "+ Final Position: $Moves moves"
PrintRods
fi
sleep $DELAY
}
# From here down, almost the same as original (hanoi.bash) script.
dohanoi() { # Recursive function.
case $1 in
0)
;;
Appendix A. Contributed Scripts 722](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-728-320.jpg)
![Advanced Bash-Scripting Guide
*)
dohanoi "$(($1-1))" $2 $4 $3
if [ "$Moves" -ne 0 ]
then
tput cup 0 0
echo; echo "+ Position after move $Moves"
fi
((Moves++))
echo -n " Next move will be: "
echo $2 "-->" $3
display $2 $3
dohanoi "$(($1-1))" $4 $3 $2
;;
esac
}
setup_arrays ()
{
local dim n elem
let "dim1 = $1 - 1"
elem=$dim1
for n in $(seq 0 $dim1)
do
let "Rod1[$elem] = 2 * $n + 1"
Rod2[$n]=0
Rod3[$n]=0
((elem--))
done
}
### Main ###
trap "tput cnorm" 0
tput civis
clear
setup_arrays $DISKS
tput cup 0 0
echo; echo "+ Start Position"
case $# in
1) case $(($1>0)) in # Must have at least one disk.
1)
disks=$1
dohanoi $1 1 3 2
# Total moves = 2^n - 1, where n = # of disks.
echo
exit 0;
;;
*)
echo "$0: Illegal value for number of disks";
exit $E_BADPARAM;
;;
esac
;;
*)
echo "usage: $0 N"
echo " Where "N" is the number of disks."
Appendix A. Contributed Scripts 723](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-729-320.jpg)
![Advanced Bash-Scripting Guide
exit $E_NOPARAM;
;;
esac
exit $E_NOEXIT # Shouldn't exit here.
# Exercise:
# --------
# There is a minor bug in the script that causes the display of
#+ the next-to-last move to be skipped.
#+ Fix this.
Example A-50. An alternate version of the getopt-simple.sh script
#!/bin/bash
# UseGetOpt.sh
# Author: Peggy Russell <prusselltechgroup@gmail.com>
UseGetOpt () {
declare inputOptions
declare -r E_OPTERR=85
declare -r ScriptName=${0##*/}
declare -r ShortOpts="adf:hlt"
declare -r LongOpts="aoption,debug,file:,help,log,test"
DoSomething () {
echo "The function name is '${FUNCNAME}'"
# Recall that $FUNCNAME is an internal variable
#+ holding the name of the function it is in.
}
inputOptions=$(getopt -o "${ShortOpts}" --long
"${LongOpts}" --name "${ScriptName}" -- "${@}")
if [[ ($? -ne 0) || ($# -eq 0) ]]; then
echo "Usage: ${ScriptName} [-dhlt] {OPTION...}"
exit $E_OPTERR
fi
eval set -- "${inputOptions}"
# Only for educational purposes. Can be removed.
#-----------------------------------------------
echo "++ Test: Number of arguments: [$#]"
echo '++ Test: Looping through "$@"'
for a in "$@"; do
echo " ++ [$a]"
done
#-----------------------------------------------
while true; do
case "${1}" in
--aoption | -a) # Argument found.
echo "Option [$1]"
;;
--debug | -d) # Enable informational messages.
echo "Option [$1] Debugging enabled"
;;
Appendix A. Contributed Scripts 724](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-730-320.jpg)
![Advanced Bash-Scripting Guide
--file | -f) # Check for optional argument.
case "$2" in #+ Double colon is optional argument.
"") # Not there.
echo "Option [$1] Use default"
shift
;;
*) # Got it
echo "Option [$1] Using input [$2]"
shift
;;
esac
DoSomething
;;
--log | -l) # Enable Logging.
echo "Option [$1] Logging enabled"
;;
--test | -t) # Enable testing.
echo "Option [$1] Testing enabled"
;;
--help | -h)
echo "Option [$1] Display help"
break
;;
--) # Done! $# is argument number for "--", $@ is "--"
echo "Option [$1] Dash Dash"
break
;;
*)
echo "Major internal error!"
exit 8
;;
esac
echo "Number of arguments: [$#]"
shift
done
shift
# Only for educational purposes. Can be removed.
#----------------------------------------------------------------------
echo "++ Test: Number of arguments after "--" is [$#] They are: [$@]"
echo '++ Test: Looping through "$@"'
for a in "$@"; do
echo " ++ [$a]"
done
#----------------------------------------------------------------------
}
################################### M A I N ########################
# If you remove "function UseGetOpt () {" and corresponding "}",
#+ you can uncomment the "exit 0" line below, and invoke this script
#+ with the various options from the command-line.
#-------------------------------------------------------------------
# exit 0
Appendix A. Contributed Scripts 725](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-731-320.jpg)
![Advanced Bash-Scripting Guide
echo "Test 1"
UseGetOpt -f myfile one "two three" four
echo;echo "Test 2"
UseGetOpt -h
echo;echo "Test 3 - Short Options"
UseGetOpt -adltf myfile anotherfile
echo;echo "Test 4 - Long Options"
UseGetOpt --aoption --debug --log --test --file myfile anotherfile
exit
Example A-51. The version of the UseGetOpt.sh example used in the Tab Expansion appendix
#!/bin/bash
# UseGetOpt-2.sh
# Modified version of the script for illustrating tab-expansion
#+ of command-line options.
# See the "Introduction to Tab Expansion" appendix.
# Possible options: -a -d -f -l -t -h
#+ --aoption, --debug --file --log --test -- help --
# Author of original script: Peggy Russell <prusselltechgroup@gmail.com>
# UseGetOpt () {
declare inputOptions
declare -r E_OPTERR=85
declare -r ScriptName=${0##*/}
declare -r ShortOpts="adf:hlt"
declare -r LongOpts="aoption,debug,file:,help,log,test"
DoSomething () {
echo "The function name is '${FUNCNAME}'"
}
inputOptions=$(getopt -o "${ShortOpts}" --long
"${LongOpts}" --name "${ScriptName}" -- "${@}")
if [[ ($? -ne 0) || ($# -eq 0) ]]; then
echo "Usage: ${ScriptName} [-dhlt] {OPTION...}"
exit $E_OPTERR
fi
eval set -- "${inputOptions}"
while true; do
case "${1}" in
--aoption | -a) # Argument found.
echo "Option [$1]"
;;
--debug | -d) # Enable informational messages.
echo "Option [$1] Debugging enabled"
;;
Appendix A. Contributed Scripts 726](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-732-320.jpg)
![Advanced Bash-Scripting Guide
--file | -f) # Check for optional argument.
case "$2" in #+ Double colon is optional argument.
"") # Not there.
echo "Option [$1] Use default"
shift
;;
*) # Got it
echo "Option [$1] Using input [$2]"
shift
;;
esac
DoSomething
;;
--log | -l) # Enable Logging.
echo "Option [$1] Logging enabled"
;;
--test | -t) # Enable testing.
echo "Option [$1] Testing enabled"
;;
--help | -h)
echo "Option [$1] Display help"
break
;;
--) # Done! $# is argument number for "--", $@ is "--"
echo "Option [$1] Dash Dash"
break
;;
*)
echo "Major internal error!"
exit 8
;;
esac
echo "Number of arguments: [$#]"
shift
done
shift
# }
exit
Example A-52. Cycling through all the possible color backgrounds
#!/bin/bash
# show-all-colors.sh
# Displays all 256 possible background colors, using ANSI escape sequences.
# Author: Chetankumar Phulpagare
# Used in ABS Guide with permission.
T1=8
Appendix A. Contributed Scripts 727](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-733-320.jpg)
![Advanced Bash-Scripting Guide
#+ to all elements (characters) of a string.
# To specify an element (character) of a string,
#+ the Extended-Syntax reference notation (see below) MAY be used.
# Specifying only the name of a Bash array references
#+ the subscript zero element,
#+ NOT the FIRST DEFINED nor the FIRST WITH CONTENTS element.
# Additional qualification is needed to reference other elements,
#+ which means that the reference MUST be written in Extended-Syntax.
# The general form is: ${name[subscript]}.
# The string forms may also be used: ${name:subscript}
#+ for Bash-Arrays when referencing the subscript zero element.
# Bash-Arrays are implemented internally as linked lists,
#+ not as a fixed area of storage as in some programming languages.
# Characteristics of Bash arrays (Bash-Arrays):
# --------------------------------------------
# If not otherwise specified, Bash-Array subscripts begin with
#+ subscript number zero. Literally: [0]
# This is called zero-based indexing.
###
# If not otherwise specified, Bash-Arrays are subscript packed
#+ (sequential subscripts without subscript gaps).
###
# Negative subscripts are not allowed.
###
# Elements of a Bash-Array need not all be of the same type.
###
# Elements of a Bash-Array may be undefined (null reference).
# That is, a Bash-Array may be "subscript sparse."
###
# Elements of a Bash-Array may be defined and empty (null contents).
###
# Elements of a Bash-Array may contain:
# * A whole number as a signed 32-bit (or larger) integer
# * A string
# * A string formated so that it appears to be a function name
# + with optional arguments
###
# Defined elements of a Bash-Array may be undefined (unset).
# That is, a subscript packed Bash-Array may be changed
# + into a subscript sparse Bash-Array.
###
# Elements may be added to a Bash-Array by defining an element
#+ not previously defined.
###
# For these reasons, I have been calling them "Bash-Arrays".
# I'll return to the generic term "array" from now on.
# -- msz
Appendix A. Contributed Scripts 731](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-737-320.jpg)
![Advanced Bash-Scripting Guide
echo "========================================================="
# Lines 202 - 334 supplied by Cliff Bamford. (Thanks!)
# Demo --- Interaction with Arrays, quoting, IFS, echo, * and @ ---
#+ all affect how things work
ArrayVar[0]='zero' # 0 normal
ArrayVar[1]=one # 1 unquoted literal
ArrayVar[2]='two' # 2 normal
ArrayVar[3]='three' # 3 normal
ArrayVar[4]='I am four' # 4 normal with spaces
ArrayVar[5]='five' # 5 normal
unset ArrayVar[6] # 6 undefined
ArrayValue[7]='seven' # 7 normal
ArrayValue[8]='' # 8 defined but empty
ArrayValue[9]='nine' # 9 normal
echo '--- Here is the array we are using for this test'
echo
echo "ArrayVar[0]='zero' # 0 normal"
echo "ArrayVar[1]=one # 1 unquoted literal"
echo "ArrayVar[2]='two' # 2 normal"
echo "ArrayVar[3]='three' # 3 normal"
echo "ArrayVar[4]='I am four' # 4 normal with spaces"
echo "ArrayVar[5]='five' # 5 normal"
echo "unset ArrayVar[6] # 6 undefined"
echo "ArrayValue[7]='seven' # 7 normal"
echo "ArrayValue[8]='' # 8 defined but empty"
echo "ArrayValue[9]='nine' # 9 normal"
echo
echo
echo '---Case0: No double-quotes, Default IFS of space,tab,newline ---'
IFS=$'x20'$'x09'$'x0A' # In exactly this order.
echo 'Here is: printf %q {${ArrayVar[*]}'
printf %q ${ArrayVar[*]}
echo
echo 'Here is: printf %q {${ArrayVar[@]}'
printf %q ${ArrayVar[@]}
echo
echo 'Here is: echo ${ArrayVar[*]}'
echo ${ArrayVar[@]}
echo 'Here is: echo {${ArrayVar[@]}'
echo ${ArrayVar[@]}
echo
echo '---Case1: Within double-quotes - Default IFS of space-tab-
newline ---'
IFS=$'x20'$'x09'$'x0A' # These three bytes,
echo 'Here is: printf %q "{${ArrayVar[*]}"'
printf %q "${ArrayVar[*]}"
echo
echo 'Here is: printf %q "{${ArrayVar[@]}"'
printf %q "${ArrayVar[@]}"
echo
echo 'Here is: echo "${ArrayVar[*]}"'
echo "${ArrayVar[@]}"
echo 'Here is: echo "{${ArrayVar[@]}"'
echo "${ArrayVar[@]}"
Appendix A. Contributed Scripts 732](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-738-320.jpg)
![Advanced Bash-Scripting Guide
echo
echo '---Case2: Within double-quotes - IFS is q'
IFS='q'
echo 'Here is: printf %q "{${ArrayVar[*]}"'
printf %q "${ArrayVar[*]}"
echo
echo 'Here is: printf %q "{${ArrayVar[@]}"'
printf %q "${ArrayVar[@]}"
echo
echo 'Here is: echo "${ArrayVar[*]}"'
echo "${ArrayVar[@]}"
echo 'Here is: echo "{${ArrayVar[@]}"'
echo "${ArrayVar[@]}"
echo
echo '---Case3: Within double-quotes - IFS is ^'
IFS='^'
echo 'Here is: printf %q "{${ArrayVar[*]}"'
printf %q "${ArrayVar[*]}"
echo
echo 'Here is: printf %q "{${ArrayVar[@]}"'
printf %q "${ArrayVar[@]}"
echo
echo 'Here is: echo "${ArrayVar[*]}"'
echo "${ArrayVar[@]}"
echo 'Here is: echo "{${ArrayVar[@]}"'
echo "${ArrayVar[@]}"
echo
echo '---Case4: Within double-quotes - IFS is ^ followed by
space,tab,newline'
IFS=$'^'$'x20'$'x09'$'x0A' # ^ + space tab newline
echo 'Here is: printf %q "{${ArrayVar[*]}"'
printf %q "${ArrayVar[*]}"
echo
echo 'Here is: printf %q "{${ArrayVar[@]}"'
printf %q "${ArrayVar[@]}"
echo
echo 'Here is: echo "${ArrayVar[*]}"'
echo "${ArrayVar[@]}"
echo 'Here is: echo "{${ArrayVar[@]}"'
echo "${ArrayVar[@]}"
echo
echo '---Case6: Within double-quotes - IFS set and empty '
IFS=''
echo 'Here is: printf %q "{${ArrayVar[*]}"'
printf %q "${ArrayVar[*]}"
echo
echo 'Here is: printf %q "{${ArrayVar[@]}"'
printf %q "${ArrayVar[@]}"
echo
echo 'Here is: echo "${ArrayVar[*]}"'
echo "${ArrayVar[@]}"
echo 'Here is: echo "{${ArrayVar[@]}"'
echo "${ArrayVar[@]}"
echo
echo '---Case7: Within double-quotes - IFS is unset'
unset IFS
echo 'Here is: printf %q "{${ArrayVar[*]}"'
printf %q "${ArrayVar[*]}"
Appendix A. Contributed Scripts 733](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-739-320.jpg)
![Advanced Bash-Scripting Guide
echo
echo 'Here is: printf %q "{${ArrayVar[@]}"'
printf %q "${ArrayVar[@]}"
echo
echo 'Here is: echo "${ArrayVar[*]}"'
echo "${ArrayVar[@]}"
echo 'Here is: echo "{${ArrayVar[@]}"'
echo "${ArrayVar[@]}"
echo
echo '---End of Cases---'
echo "========================================================="; echo
# Put IFS back to the default.
# Default is exactly these three bytes.
IFS=$'x20'$'x09'$'x0A' # In exactly this order.
# Interpretation of the above outputs:
# A Glob-Pattern is I/O; the setting of IFS matters.
###
# An All-Elements-Of does not consider IFS settings.
###
# Note the different output using the echo command and the
#+ quoted format operator of the printf command.
# Recall:
# Parameters are similar to arrays and have the similar behaviors.
###
# The above examples demonstrate the possible variations.
# To retain the shape of a sparse array, additional script
#+ programming is required.
###
# The source code of Bash has a routine to output the
#+ [subscript]=value array assignment format.
# As of version 2.05b, that routine is not used,
#+ but that might change in future releases.
# The length of a string, measured in non-null elements (characters):
echo
echo '- - Non-quoted references - -'
echo 'Non-Null character count: '${#VarSomething}' characters.'
# test='Lit'$'x00''eral' # $'x00' is a null character.
# echo ${#test} # See that?
# The length of an array, measured in defined elements,
#+ including null content elements.
echo
echo 'Defined content count: '${#ArrayVar[@]}' elements.'
# That is NOT the maximum subscript (4).
# That is NOT the range of the subscripts (1 . . 4 inclusive).
# It IS the length of the linked list.
###
# Both the maximum subscript and the range of the subscripts may
#+ be found with additional script programming.
Appendix A. Contributed Scripts 734](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-740-320.jpg)
![Advanced Bash-Scripting Guide
# The length of a string, measured in non-null elements (characters):
echo
echo '- - Quoted, Glob-Pattern references - -'
echo 'Non-Null character count: '"${#VarSomething}"' characters.'
# The length of an array, measured in defined elements,
#+ including null-content elements.
echo
echo 'Defined element count: '"${#ArrayVar[*]}"' elements.'
# Interpretation: Substitution does not effect the ${# ... } operation.
# Suggestion:
# Always use the All-Elements-Of character
#+ if that is what is intended (independence from IFS).
# Define a simple function.
# I include an underscore in the name
#+ to make it distinctive in the examples below.
###
# Bash separates variable names and function names
#+ in different namespaces.
# The Mark-One eyeball isn't that advanced.
###
_simple() {
echo -n 'SimpleFunc'$@ # Newlines are swallowed in
} #+ result returned in any case.
# The ( ... ) notation invokes a command or function.
# The $( ... ) notation is pronounced: Result-Of.
# Invoke the function _simple
echo
echo '- - Output of function _simple - -'
_simple # Try passing arguments.
echo
# or
(_simple) # Try passing arguments.
echo
echo '- Is there a variable of that name? -'
echo $_simple not defined # No variable by that name.
# Invoke the result of function _simple (Error msg intended)
###
$(_simple) # Gives an error message:
# line 436: SimpleFunc: command not found
# ---------------------------------------
echo
###
# The first word of the result of function _simple
#+ is neither a valid Bash command nor the name of a defined function.
###
# This demonstrates that the output of _simple is subject to evaluation.
###
Appendix A. Contributed Scripts 735](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-741-320.jpg)
![Advanced Bash-Scripting Guide
echo
echo '- - Delayed replacement - -'
funcVar="$(_print '$VarSomething')" # No replacement, single Bash-Word.
eval $funcVar # $VarSomething replaced HERE.
echo
VarSomething='NewThing'
eval $funcVar # $VarSomething replaced HERE.
echo
# Restore the original setting trashed above.
VarSomething=Literal
# There are a pair of functions demonstrated in the
#+ "protect_literal.sh" and "unprotect_literal.sh" examples.
# These are general purpose functions for delayed replacement literals
#+ containing variables.
# REVIEW:
# ------
# A string can be considered a Classic-Array of elements (characters).
# A string operation applies to all elements (characters) of the string
#+ (in concept, anyway).
###
# The notation: ${array_name[@]} represents all elements of the
#+ Bash-Array: array_name.
###
# The Extended-Syntax string operations can be applied to all
#+ elements of an array.
###
# This may be thought of as a For-Each operation on a vector of strings.
###
# Parameters are similar to an array.
# The initialization of a parameter array for a script
#+ and a parameter array for a function only differ
#+ in the initialization of ${0}, which never changes its setting.
###
# Subscript zero of the script's parameter array contains
#+ the name of the script.
###
# Subscript zero of a function's parameter array DOES NOT contain
#+ the name of the function.
# The name of the current function is accessed by the $FUNCNAME variable.
###
# A quick, review list follows (quick, not short).
echo
echo '- - Test (but not change) - -'
echo '- null reference -'
echo -n ${VarNull-'NotSet'}' ' # NotSet
echo ${VarNull} # NewLine only
echo -n ${VarNull:-'NotSet'}' ' # NotSet
echo ${VarNull} # Newline only
echo '- null contents -'
echo -n ${VarEmpty-'Empty'}' ' # Only the space
Appendix A. Contributed Scripts 737](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-743-320.jpg)
![Advanced Bash-Scripting Guide
echo ${VarEmpty} # Newline only
echo -n ${VarEmpty:-'Empty'}' ' # Empty
echo ${VarEmpty} # Newline only
echo '- contents -'
echo ${VarSomething-'Content'} # Literal
echo ${VarSomething:-'Content'} # Literal
echo '- Sparse Array -'
echo ${ArrayVar[@]-'not set'}
# ASCII-Art time
# State Y==yes, N==no
# - :-
# Unset Y Y ${# ... } == 0
# Empty N Y ${# ... } == 0
# Contents N N ${# ... } > 0
# Either the first and/or the second part of the tests
#+ may be a command or a function invocation string.
echo
echo '- - Test 1 for undefined - -'
declare -i t
_decT() {
t=$t-1
}
# Null reference, set: t == -1
t=${#VarNull} # Results in zero.
${VarNull- _decT } # Function executes, t now -1.
echo $t
# Null contents, set: t == 0
t=${#VarEmpty} # Results in zero.
${VarEmpty- _decT } # _decT function NOT executed.
echo $t
# Contents, set: t == number of non-null characters
VarSomething='_simple' # Set to valid function name.
t=${#VarSomething} # non-zero length
${VarSomething- _decT } # Function _simple executed.
echo $t # Note the Append-To action.
# Exercise: clean up that example.
unset t
unset _decT
VarSomething=Literal
echo
echo '- - Test and Change - -'
echo '- Assignment if null reference -'
echo -n ${VarNull='NotSet'}' ' # NotSet NotSet
echo ${VarNull}
unset VarNull
echo '- Assignment if null reference -'
echo -n ${VarNull:='NotSet'}' ' # NotSet NotSet
echo ${VarNull}
unset VarNull
echo '- No assignment if null contents -'
echo -n ${VarEmpty='Empty'}' ' # Space only
Appendix A. Contributed Scripts 738](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-744-320.jpg)
![Advanced Bash-Scripting Guide
echo ${VarEmpty}
VarEmpty=''
echo '- Assignment if null contents -'
echo -n ${VarEmpty:='Empty'}' ' # Empty Empty
echo ${VarEmpty}
VarEmpty=''
echo '- No change if already has contents -'
echo ${VarSomething='Content'} # Literal
echo ${VarSomething:='Content'} # Literal
# "Subscript sparse" Bash-Arrays
###
# Bash-Arrays are subscript packed, beginning with
#+ subscript zero unless otherwise specified.
###
# The initialization of ArrayVar was one way
#+ to "otherwise specify". Here is the other way:
###
echo
declare -a ArraySparse
ArraySparse=( [1]=one [2]='' [4]='four' )
# [0]=null reference, [2]=null content, [3]=null reference
echo '- - Array-Sparse List - -'
# Within double-quotes, default IFS, Glob-Pattern
IFS=$'x20'$'x09'$'x0A'
printf %q "${ArraySparse[*]}"
echo
# Note that the output does not distinguish between "null content"
#+ and "null reference".
# Both print as escaped whitespace.
###
# Note also that the output does NOT contain escaped whitespace
#+ for the "null reference(s)" prior to the first defined element.
###
# This behavior of 2.04, 2.05a and 2.05b has been reported
#+ and may change in a future version of Bash.
# To output a sparse array and maintain the [subscript]=value
#+ relationship without change requires a bit of programming.
# One possible code fragment:
###
# local l=${#ArraySparse[@]} # Count of defined elements
# local f=0 # Count of found subscripts
# local i=0 # Subscript to test
( # Anonymous in-line function
for (( l=${#ArraySparse[@]}, f = 0, i = 0 ; f < l ; i++ ))
do
# 'if defined then...'
${ArraySparse[$i]+ eval echo ' ['$i']='${ArraySparse[$i]} ; (( f++ )) }
done
)
# The reader coming upon the above code fragment cold
#+ might want to review "command lists" and "multiple commands on a line"
#+ in the text of the foregoing "Advanced Bash Scripting Guide."
###
Appendix A. Contributed Scripts 739](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-745-320.jpg)
![Advanced Bash-Scripting Guide
# Note:
# The "read -a array_name" version of the "read" command
#+ begins filling array_name at subscript zero.
# ArraySparse does not define a value at subscript zero.
###
# The user needing to read/write a sparse array to either
#+ external storage or a communications socket must invent
#+ a read/write code pair suitable for their purpose.
###
# Exercise: clean it up.
unset ArraySparse
echo
echo '- - Conditional alternate (But not change)- -'
echo '- No alternate if null reference -'
echo -n ${VarNull+'NotSet'}' '
echo ${VarNull}
unset VarNull
echo '- No alternate if null reference -'
echo -n ${VarNull:+'NotSet'}' '
echo ${VarNull}
unset VarNull
echo '- Alternate if null contents -'
echo -n ${VarEmpty+'Empty'}' ' # Empty
echo ${VarEmpty}
VarEmpty=''
echo '- No alternate if null contents -'
echo -n ${VarEmpty:+'Empty'}' ' # Space only
echo ${VarEmpty}
VarEmpty=''
echo '- Alternate if already has contents -'
# Alternate literal
echo -n ${VarSomething+'Content'}' ' # Content Literal
echo ${VarSomething}
# Invoke function
echo -n ${VarSomething:+ $(_simple) }' ' # SimpleFunc Literal
echo ${VarSomething}
echo
echo '- - Sparse Array - -'
echo ${ArrayVar[@]+'Empty'} # An array of 'Empty'(ies)
echo
echo '- - Test 2 for undefined - -'
declare -i t
_incT() {
t=$t+1
}
# Note:
# This is the same test used in the sparse array
#+ listing code fragment.
# Null reference, set: t == -1
Appendix A. Contributed Scripts 740](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-746-320.jpg)
![Advanced Bash-Scripting Guide
t=${#VarNull}-1 # Results in minus-one.
${VarNull+ _incT } # Does not execute.
echo $t' Null reference'
# Null contents, set: t == 0
t=${#VarEmpty}-1 # Results in minus-one.
${VarEmpty+ _incT } # Executes.
echo $t' Null content'
# Contents, set: t == (number of non-null characters)
t=${#VarSomething}-1 # non-null length minus-one
${VarSomething+ _incT } # Executes.
echo $t' Contents'
# Exercise: clean up that example.
unset t
unset _incT
# ${name?err_msg} ${name:?err_msg}
# These follow the same rules but always exit afterwards
#+ if an action is specified following the question mark.
# The action following the question mark may be a literal
#+ or a function result.
###
# ${name?} ${name:?} are test-only, the return can be tested.
# Element operations
# ------------------
echo
echo '- - Trailing sub-element selection - -'
# Strings, Arrays and Positional parameters
# Call this script with multiple arguments
#+ to see the parameter selections.
echo '- All -'
echo ${VarSomething:0} # all non-null characters
echo ${ArrayVar[@]:0} # all elements with content
echo ${@:0} # all parameters with content;
# ignoring parameter[0]
echo
echo '- All after -'
echo ${VarSomething:1} # all non-null after character[0]
echo ${ArrayVar[@]:1} # all after element[0] with content
echo ${@:2} # all after param[1] with content
echo
echo '- Range after -'
echo ${VarSomething:4:3} # ral
# Three characters after
# character[3]
echo '- Sparse array gotch -'
echo ${ArrayVar[@]:1:2} # four - The only element with content.
# Two elements after (if that many exist).
# the FIRST WITH CONTENTS
Appendix A. Contributed Scripts 741](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-747-320.jpg)
![Advanced Bash-Scripting Guide
#+ (the FIRST WITH CONTENTS is being
#+ considered as if it
#+ were subscript zero).
# Executed as if Bash considers ONLY array elements with CONTENT
# printf %q "${ArrayVar[@]:0:3}" # Try this one
# In versions 2.04, 2.05a and 2.05b,
#+ Bash does not handle sparse arrays as expected using this notation.
#
# The current Bash maintainer, Chet Ramey, has corrected this.
echo '- Non-sparse array -'
echo ${@:2:2} # Two parameters following parameter[1]
# New victims for string vector examples:
stringZ=abcABC123ABCabc
arrayZ=( abcabc ABCABC 123123 ABCABC abcabc )
sparseZ=( [1]='abcabc' [3]='ABCABC' [4]='' [5]='123123' )
echo
echo ' - - Victim string - -'$stringZ'- - '
echo ' - - Victim array - -'${arrayZ[@]}'- - '
echo ' - - Sparse array - -'${sparseZ[@]}'- - '
echo ' - [0]==null ref, [2]==null ref, [4]==null content - '
echo ' - [1]=abcabc [3]=ABCABC [5]=123123 - '
echo ' - non-null-reference count: '${#sparseZ[@]}' elements'
echo
echo '- - Prefix sub-element removal - -'
echo '- - Glob-Pattern match must include the first character. - -'
echo '- - Glob-Pattern may be a literal or a function result. - -'
echo
# Function returning a simple, Literal, Glob-Pattern
_abc() {
echo -n 'abc'
}
echo '- Shortest prefix -'
echo ${stringZ#123} # Unchanged (not a prefix).
echo ${stringZ#$(_abc)} # ABC123ABCabc
echo ${arrayZ[@]#abc} # Applied to each element.
# echo ${sparseZ[@]#abc} # Version-2.05b core dumps.
# Has since been fixed by Chet Ramey.
# The -it would be nice- First-Subscript-Of
# echo ${#sparseZ[@]#*} # This is NOT valid Bash.
echo
echo '- Longest prefix -'
echo ${stringZ##1*3} # Unchanged (not a prefix)
echo ${stringZ##a*C} # abc
echo ${arrayZ[@]##a*c} # ABCABC 123123 ABCABC
# echo ${sparseZ[@]##a*c} # Version-2.05b core dumps.
# Has since been fixed by Chet Ramey.
echo
echo '- - Suffix sub-element removal - -'
Appendix A. Contributed Scripts 742](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-748-320.jpg)
![Advanced Bash-Scripting Guide
echo '- - Glob-Pattern match must include the last character. - -'
echo '- - Glob-Pattern may be a literal or a function result. - -'
echo
echo '- Shortest suffix -'
echo ${stringZ%1*3} # Unchanged (not a suffix).
echo ${stringZ%$(_abc)} # abcABC123ABC
echo ${arrayZ[@]%abc} # Applied to each element.
# echo ${sparseZ[@]%abc} # Version-2.05b core dumps.
# Has since been fixed by Chet Ramey.
# The -it would be nice- Last-Subscript-Of
# echo ${#sparseZ[@]%*} # This is NOT valid Bash.
echo
echo '- Longest suffix -'
echo ${stringZ%%1*3} # Unchanged (not a suffix)
echo ${stringZ%%b*c} # a
echo ${arrayZ[@]%%b*c} # a ABCABC 123123 ABCABC a
# echo ${sparseZ[@]%%b*c} # Version-2.05b core dumps.
# Has since been fixed by Chet Ramey.
echo
echo '- - Sub-element replacement - -'
echo '- - Sub-element at any location in string. - -'
echo '- - First specification is a Glob-Pattern - -'
echo '- - Glob-Pattern may be a literal or Glob-Pattern function result. - -'
echo '- - Second specification may be a literal or function result. - -'
echo '- - Second specification may be unspecified. Pronounce that'
echo ' as: Replace-With-Nothing (Delete) - -'
echo
# Function returning a simple, Literal, Glob-Pattern
_123() {
echo -n '123'
}
echo '- Replace first occurrence -'
echo ${stringZ/$(_123)/999} # Changed (123 is a component).
echo ${stringZ/ABC/xyz} # xyzABC123ABCabc
echo ${arrayZ[@]/ABC/xyz} # Applied to each element.
echo ${sparseZ[@]/ABC/xyz} # Works as expected.
echo
echo '- Delete first occurrence -'
echo ${stringZ/$(_123)/}
echo ${stringZ/ABC/}
echo ${arrayZ[@]/ABC/}
echo ${sparseZ[@]/ABC/}
# The replacement need not be a literal,
#+ since the result of a function invocation is allowed.
# This is general to all forms of replacement.
echo
echo '- Replace first occurrence with Result-Of -'
echo ${stringZ/$(_123)/$(_simple)} # Works as expected.
echo ${arrayZ[@]/ca/$(_simple)} # Applied to each element.
echo ${sparseZ[@]/ca/$(_simple)} # Works as expected.
Appendix A. Contributed Scripts 743](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-749-320.jpg)
![Advanced Bash-Scripting Guide
echo
echo '- Replace all occurrences -'
echo ${stringZ//[b2]/X} # X-out b's and 2's
echo ${stringZ//abc/xyz} # xyzABC123ABCxyz
echo ${arrayZ[@]//abc/xyz} # Applied to each element.
echo ${sparseZ[@]//abc/xyz} # Works as expected.
echo
echo '- Delete all occurrences -'
echo ${stringZ//[b2]/}
echo ${stringZ//abc/}
echo ${arrayZ[@]//abc/}
echo ${sparseZ[@]//abc/}
echo
echo '- - Prefix sub-element replacement - -'
echo '- - Match must include the first character. - -'
echo
echo '- Replace prefix occurrences -'
echo ${stringZ/#[b2]/X} # Unchanged (neither is a prefix).
echo ${stringZ/#$(_abc)/XYZ} # XYZABC123ABCabc
echo ${arrayZ[@]/#abc/XYZ} # Applied to each element.
echo ${sparseZ[@]/#abc/XYZ} # Works as expected.
echo
echo '- Delete prefix occurrences -'
echo ${stringZ/#[b2]/}
echo ${stringZ/#$(_abc)/}
echo ${arrayZ[@]/#abc/}
echo ${sparseZ[@]/#abc/}
echo
echo '- - Suffix sub-element replacement - -'
echo '- - Match must include the last character. - -'
echo
echo '- Replace suffix occurrences -'
echo ${stringZ/%[b2]/X} # Unchanged (neither is a suffix).
echo ${stringZ/%$(_abc)/XYZ} # abcABC123ABCXYZ
echo ${arrayZ[@]/%abc/XYZ} # Applied to each element.
echo ${sparseZ[@]/%abc/XYZ} # Works as expected.
echo
echo '- Delete suffix occurrences -'
echo ${stringZ/%[b2]/}
echo ${stringZ/%$(_abc)/}
echo ${arrayZ[@]/%abc/}
echo ${sparseZ[@]/%abc/}
echo
echo '- - Special cases of null Glob-Pattern - -'
echo
echo '- Prefix all -'
# null substring pattern means 'prefix'
echo ${stringZ/#/NEW} # NEWabcABC123ABCabc
echo ${arrayZ[@]/#/NEW} # Applied to each element.
echo ${sparseZ[@]/#/NEW} # Applied to null-content also.
# That seems reasonable.
echo
Appendix A. Contributed Scripts 744](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-750-320.jpg)
![Advanced Bash-Scripting Guide
echo '- Suffix all -'
# null substring pattern means 'suffix'
echo ${stringZ/%/NEW} # abcABC123ABCabcNEW
echo ${arrayZ[@]/%/NEW} # Applied to each element.
echo ${sparseZ[@]/%/NEW} # Applied to null-content also.
# That seems reasonable.
echo
echo '- - Special case For-Each Glob-Pattern - -'
echo '- - - - This is a nice-to-have dream - - - -'
echo
_GenFunc() {
echo -n ${0} # Illustration only.
# Actually, that would be an arbitrary computation.
}
# All occurrences, matching the AnyThing pattern.
# Currently //*/ does not match null-content nor null-reference.
# /#/ and /%/ does match null-content but not null-reference.
echo ${sparseZ[@]//*/$(_GenFunc)}
# A possible syntax would be to make
#+ the parameter notation used within this construct mean:
# ${1} - The full element
# ${2} - The prefix, if any, to the matched sub-element
# ${3} - The matched sub-element
# ${4} - The suffix, if any, to the matched sub-element
#
# echo ${sparseZ[@]//*/$(_GenFunc ${3})} # Same as ${1} here.
# Perhaps it will be implemented in a future version of Bash.
exit 0
Appendix A. Contributed Scripts 745](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-751-320.jpg)
![Advanced Bash-Scripting Guide
-z String is empty
-n String is not empty
Arithmetic Comparison within double parentheses (( ... ))
> Greater than
>= Greater than or equal to
< Less than
<= Less than or equal to
* If within a double-bracket [[ ... ]] test construct, then no escape is needed.
Table B-3. TEST Operators: Files
Operator Tests Whether ----- Operator Tests Whether
-e File exists -s File is not zero size
-f File is a regular file
-d File is a directory -r File has read permission
-h File is a symbolic link -w File has write permission
-L File is a symbolic link -x File has execute permission
-b File is a block device
-c File is a character device -g sgid flag set
-p File is a pipe -u suid flag set
-S File is a socket -k "sticky bit" set
-t File is associated with a terminal
-N File modified since it was last read F1 -nt F2 File F1 is newer than F2 *
-O You own the file F1 -ot F2 File F1 is older than F2 *
-G Group id of file same as yours F1 -ef F2 Files F1 and F2 are hard links to the
same file *
! NOT (inverts sense of above tests)
* Binary operator (requires two operands).
Table B-4. Parameter Substitution and Expansion
Expression Meaning
${var} Value of var, same as $var
${var-DEFAULT} If var not set, evaluate expression as $DEFAULT *
${var:-DEFAULT} If var not set or is empty, evaluate expression as $DEFAULT *
Appendix B. Reference Cards 747](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-753-320.jpg)
![Advanced Bash-Scripting Guide
$string
expr "$string" : '$substring' Length of matching $substring* at beginning of
$string
expr index "$string" $substring Numerical position in $string of first character in
$substring that matches
expr substr $string $position Extract $length characters from $string starting
$length at $position
expr match "$string" Extract $substring* at beginning of $string
'($substring)'
expr "$string" : '($substring)' Extract $substring* at beginning of $string
expr match "$string" Extract $substring* at end of $string
'.*($substring)'
expr "$string" : '.*($substring)' Extract $substring* at end of $string
* Where $substring is a Regular Expression.
Table B-6. Miscellaneous Constructs
Expression Interpretation
Brackets
if [ CONDITION ] Test construct
if [[ CONDITION ]] Extended test construct
Array[1]=element1 Array initialization
[a-z] Range of characters within a Regular Expression
Curly Brackets
${variable} Parameter substitution
${!variable} Indirect variable reference
{ command1; command2; . . . commandN; } Block of code
{string1,string2,string3,...} Brace expansion
{a..z} Extended brace expansion
{} Text replacement, after find and xargs
Parentheses
( command1; command2 ) Command group executed within a subshell
Array=(element1 element2 element3) Array initialization
result=$(COMMAND) Command substitution, new style
>(COMMAND) Process substitution
<(COMMAND) Process substitution
Double Parentheses
Appendix B. Reference Cards 749](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-755-320.jpg)
![Appendix C. A Sed and Awk Micro-Primer
This is a very brief introduction to the sed and awk text processing utilities. We will deal with only a few
basic commands here, but that will suffice for understanding simple sed and awk constructs within shell
scripts.
sed: a non-interactive text file editor
awk: a field-oriented pattern processing language with a C-style syntax
For all their differences, the two utilities share a similar invocation syntax, use regular expressions , read input
by default from stdin, and output to stdout. These are well-behaved UNIX tools, and they work together
well. The output from one can be piped to the other, and their combined capabilities give shell scripts some of
the power of Perl.
One important difference between the utilities is that while shell scripts can easily pass arguments
to sed, it is more complicated for awk (see Example 33-5 and Example 9-25).
C.1. Sed
Sed is a non-interactive [130] stream editor. It receives text input, whether from stdin or from a file,
performs certain operations on specified lines of the input, one line at a time, then outputs the result to
stdout or to a file. Within a shell script, sed is usually one of several tool components in a pipe.
Sed determines which lines of its input that it will operate on from the address range passed to it. [131]
Specify this address range either by line number or by a pattern to match. For example, 3d signals sed to
delete line 3 of the input, and /Windows/d tells sed that you want every line of the input containing a match
to "Windows" deleted.
Of all the operations in the sed toolkit, we will focus primarily on the three most commonly used ones. These
are printing (to stdout), deletion, and substitution.
Table C-1. Basic sed operators
Operator Effect Name
[address-range]/p print
Print [specified address range]
[address-range]/d delete
Delete [specified address range]
s/pattern1/pattern2/ substitute
Substitute pattern2 for first instance of
pattern1 in a line
[address-range]/s/pattern1/pattern2/ substitute Substitute pattern2 for first instance of
pattern1 in a line, over address-range
[address-range]/y/pattern1/pattern2/ transform replace any character in pattern1 with the
corresponding character in pattern2, over
address-range (equivalent of tr)
Appendix C. A Sed and Awk Micro-Primer 751](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-757-320.jpg)
![Advanced Bash-Scripting Guide
The most important parts of any application are its GUI and sound effects
results in
The most important parts of any application are its and sound effects
A backslash forces the sed replacement command to continue on to the next line. This has the effect of using
the newline at the end of the first line as the replacement string.
s/^ */
/g
This substitution replaces line-beginning spaces with a newline. The net result is to replace paragraph indents
with a blank line between paragraphs.
An address range followed by one or more operations may require open and closed curly brackets, with
appropriate newlines.
/[0-9A-Za-z]/,/^$/{
/^$/d
}
This deletes only the first of each set of consecutive blank lines. That might be useful for single-spacing a text
file, but retaining the blank line(s) between paragraphs.
The usual delimiter that sed uses is /. However, sed allows other delimiters, such as %. This is useful
when / is part of a replacement string, as in a file pathname. See Example 10-9 and Example 15-32.
A quick way to double-space a text file is sed G filename.
For illustrative examples of sed within shell scripts, see:
1. Example 33-1
2. Example 33-2
3. Example 15-3
4. Example A-2
5. Example 15-17
6. Example 15-27
7. Example A-12
8. Example A-16
9. Example A-17
10. Example 15-32
11. Example 10-9
12. Example 15-48
13. Example A-1
14. Example 15-14
15. Example 15-12
16. Example A-10
17. Example 18-12
18. Example 15-19
19. Example A-29
20. Example A-31
21. Example A-24
22. Example A-43
For a more extensive treatment of sed, check the appropriate references in the Bibliography.
Appendix C. A Sed and Awk Micro-Primer 753](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-759-320.jpg)
![Advanced Bash-Scripting Guide
C.2. Awk
Awk [132] is a full-featured text processing language with a syntax reminiscent of C. While it possesses an
extensive set of operators and capabilities, we will cover only a few of these here - the ones most useful in
shell scripts.
Awk breaks each line of input passed to it into fields. By default, a field is a string of consecutive characters
delimited by whitespace, though there are options for changing this. Awk parses and operates on each separate
field. This makes it ideal for handling structured text files -- especially tables -- data organized into consistent
chunks, such as rows and columns.
Strong quoting and curly brackets enclose blocks of awk code within a shell script.
# $1 is field #1, $2 is field #2, etc.
echo one two | awk '{print $1}'
# one
echo one two | awk '{print $2}'
# two
# But what is field #0 ($0)?
echo one two | awk '{print $0}'
# one two
# All the fields!
awk '{print $3}' $filename
# Prints field #3 of file $filename to stdout.
awk '{print $1 $5 $6}' $filename
# Prints fields #1, #5, and #6 of file $filename.
awk '{print $0}' $filename
# Prints the entire file!
# Same effect as: cat $filename . . . or . . . sed '' $filename
We have just seen the awk print command in action. The only other feature of awk we need to deal with here
is variables. Awk handles variables similarly to shell scripts, though a bit more flexibly.
{ total += ${column_number} }
This adds the value of column_number to the running total of total>. Finally, to print "total", there is an
END command block, executed after the script has processed all its input.
END { print total }
Corresponding to the END, there is a BEGIN, for a code block to be performed before awk starts processing
its input.
The following example illustrates how awk can add text-parsing tools to a shell script.
Example C-1. Counting Letter Occurrences
#! /bin/sh
Appendix C. A Sed and Awk Micro-Primer 754](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-760-320.jpg)
![Advanced Bash-Scripting Guide
# letter-count2.sh: Counting letter occurrences in a text file.
#
# Script by nyal [nyal@voila.fr].
# Used in ABS Guide with permission.
# Recommented and reformatted by ABS Guide author.
# Version 1.1: Modified to work with gawk 3.1.3.
# (Will still work with earlier versions.)
INIT_TAB_AWK=""
# Parameter to initialize awk script.
count_case=0
FILE_PARSE=$1
E_PARAMERR=85
usage()
{
echo "Usage: letter-count.sh file letters" 2>&1
# For example: ./letter-count2.sh filename.txt a b c
exit $E_PARAMERR # Too few arguments passed to script.
}
if [ ! -f "$1" ] ; then
echo "$1: No such file." 2>&1
usage # Print usage message and exit.
fi
if [ -z "$2" ] ; then
echo "$2: No letters specified." 2>&1
usage
fi
shift # Letters specified.
for letter in `echo $@` # For each one . . .
do
INIT_TAB_AWK="$INIT_TAB_AWK tab_search[${count_case}] =
"$letter"; final_tab[${count_case}] = 0; "
# Pass as parameter to awk script below.
count_case=`expr $count_case + 1`
done
# DEBUG:
# echo $INIT_TAB_AWK;
cat $FILE_PARSE |
# Pipe the target file to the following awk script.
# ---------------------------------------------------------------------
# Earlier version of script:
# awk -v tab_search=0 -v final_tab=0 -v tab=0 -v
# nb_letter=0 -v chara=0 -v chara2=0
awk
"BEGIN { $INIT_TAB_AWK }
{ split($0, tab, "");
for (chara in tab)
{ for (chara2 in tab_search)
{ if (tab_search[chara2] == tab[chara]) { final_tab[chara2]++ } } } }
END { for (chara in final_tab)
{ print tab_search[chara] " => " final_tab[chara] } }"
# ---------------------------------------------------------------------
Appendix C. A Sed and Awk Micro-Primer 755](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-761-320.jpg)
![Appendix D. Exit Codes With Special Meanings
Table D-1. Reserved Exit Codes
Exit Code Meaning Example Comments
Number
1 Catchall for general errors let "var1 = 1/0" Miscellaneous errors, such as
"divide by zero" and other
impermissible operations
2 Misuse of shell builtins (according empty_function() {} Seldom seen, usually defaults
to Bash documentation) to exit code 1
126 Command invoked cannot execute Permission problem or
command is not an
executable
127 "command not found" illegal_command Possible problem with
$PATH or a typo
128 Invalid argument to exit exit 3.14159 exit takes only integer args in
the range 0 - 255 (see first
footnote)
128+n Fatal error signal "n" kill -9 $PPID of script $? returns 137 (128 + 9)
130 Script terminated by Control-C Control-C is fatal error signal
2, (130 = 128 + 2, see above)
255* Exit status out of range exit -1 exit takes only integer args in
the range 0 - 255
According to the above table, exit codes 1 - 2, 126 - 165, and 255 [133] have special meanings, and should
therefore be avoided for user-specified exit parameters. Ending a script with exit 127 would certainly cause
confusion when troubleshooting (is the error code a "command not found" or a user-defined one?). However,
many scripts use an exit 1 as a general bailout-upon-error. Since exit code 1 signifies so many possible errors,
it is not particularly useful in debugging.
There has been an attempt to systematize exit status numbers (see /usr/include/sysexits.h), but this
is intended for C and C++ programmers. A similar standard for scripting might be appropriate. The author of
this document proposes restricting user-defined exit codes to the range 64 - 113 (in addition to 0, for success),
to conform with the C/C++ standard. This would allot 50 valid codes, and make troubleshooting scripts more
straightforward. [134] All user-defined exit codes in the accompanying examples to this document conform to
this standard, except where overriding circumstances exist, as in Example 9-2.
Issuing a $? from the command-line after a shell script exits gives results consistent with the table above
only from the Bash or sh prompt. Running the C-shell or tcsh may give different values in some cases.
Appendix D. Exit Codes With Special Meanings 757](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-763-320.jpg)
![Appendix G. Important Files
startup files
These files contain the aliases and environmental variables made available to Bash running as a user
shell and to all Bash scripts invoked after system initialization.
/etc/profile
Systemwide defaults, mostly setting the environment (all Bourne-type shells, not just Bash [135])
/etc/bashrc
systemwide functions and aliases for Bash
$HOME/.bash_profile
user-specific Bash environmental default settings, found in each user's home directory (the local
counterpart to /etc/profile)
$HOME/.bashrc
user-specific Bash init file, found in each user's home directory (the local counterpart to
/etc/bashrc). Only interactive shells and user scripts read this file. See Appendix L for a sample
.bashrc file.
logout file
$HOME/.bash_logout
user-specific instruction file, found in each user's home directory. Upon exit from a login (Bash) shell,
the commands in this file execute.
data files
/etc/passwd
A listing of all the user accounts on the system, their identities, their home directories, the groups they
belong to, and their default shell. Note that the user passwords are not stored in this file, [136] but in
/etc/shadow in encrypted form.
system configuration files
/etc/sysconfig/hwconf
Listing and description of attached hardware devices. This information is in text form and can be
extracted and parsed.
bash$ grep -A 5 AUDIO /etc/sysconfig/hwconf
class: AUDIO
bus: PCI
detached: 0
driver: snd-intel8x0
desc: "Intel Corporation 82801CA/CAM AC'97 Audio Controller"
vendorId: 8086
This file is present on Red Hat and Fedora Core installations, but may be missing from
other distros.
Appendix G. Important Files 763](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-769-320.jpg)
![Appendix H. Important System Directories
Sysadmins and anyone else writing administrative scripts should be intimately familiar with the following
system directories.
• /bin
Binaries (executables). Basic system programs and utilities (such as bash).
• /usr/bin [137]
More system binaries.
• /usr/local/bin
Miscellaneous binaries local to the particular machine.
• /sbin
System binaries. Basic system administrative programs and utilities (such as fsck).
• /usr/sbin
More system administrative programs and utilities.
• /etc
Et cetera. Systemwide configuration scripts.
Of particular interest are the /etc/fstab (filesystem table), /etc/mtab (mounted filesystem
table), and the /etc/inittab files.
• /etc/rc.d
Boot scripts, on Red Hat and derivative distributions of Linux.
• /usr/share/doc
Documentation for installed packages.
• /usr/man
The systemwide manpages.
• /dev
Device directory. Entries (but not mount points) for physical and virtual devices. See Chapter 27.
• /proc
Process directory. Contains information and statistics about running processes and kernel parameters.
See Chapter 27.
• /sys
Systemwide device directory. Contains information and statistics about device and device names. This
is newly added to Linux with the 2.6.X kernels.
• /mnt
Mount. Directory for mounting hard drive partitions, such as /mnt/dos, and physical devices. In
newer Linux distros, the /media directory has taken over as the preferred mount point for I/O
Appendix H. Important System Directories 764](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-770-320.jpg)
![Appendix I. An Introduction to Programmable
Completion
The programmable completion feature in Bash permits typing a partial command, then pressing the [Tab] key
to auto-complete the command sequence. [138] If multiple completions are possible, then [Tab] lists them all.
Let's see how it works.
bash$ xtra[Tab]
xtraceroute xtrapin xtrapproto
xtraceroute.real xtrapinfo xtrapreset
xtrapchar xtrapout xtrapstats
bash$ xtrac[Tab]
xtraceroute xtraceroute.real
bash$ xtraceroute.r[Tab]
xtraceroute.real
Tab completion also works for variables and path names.
bash$ echo $BASH[Tab]
$BASH $BASH_COMPLETION $BASH_SUBSHELL
$BASH_ARGC $BASH_COMPLETION_DIR $BASH_VERSINFO
$BASH_ARGV $BASH_LINENO $BASH_VERSION
$BASH_COMMAND $BASH_SOURCE
bash$ echo /usr/local/[Tab]
bin/ etc/ include/ libexec/ sbin/ src/
doc/ games/ lib/ man/ share/
The Bash complete and compgen builtins make it possible for tab completion to recognize partial parameters
and options to commands. In a very simple case, we can use complete from the command-line to specify a
short list of acceptable parameters.
bash$ touch sample_command
bash$ touch file1.txt file2.txt file2.doc file30.txt file4.zzz
bash$ chmod +x sample_command
bash$ complete -f -X '!*.txt' sample_command
bash$ ./sample[Tab][Tab]
sample_command
file1.txt file2.txt file30.txt
The -f option to complete specifies filenames, and -X the filter pattern.
For anything more complex, we could write a script that specifies a list of acceptable command-line
parameters. The compgen builtin expands a list of arguments to generate completion matches.
Appendix I. An Introduction to Programmable Completion 766](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-772-320.jpg)
![Advanced Bash-Scripting Guide
Let us take a modified version of the UseGetOpt.sh script as an example command. This script accepts a
number of command-line parameters, preceded by either a single or double dash. And here is the
corresponding completion script, by convention given a filename corresponding to its associated command.
Example I-1. Completion script for UseGetOpt.sh
# file: UseGetOpt-2
# UseGetOpt-2.sh parameter-completion
_UseGetOpt-2 () # By convention, the function name
{ #+ starts with an underscore.
local cur
# Pointer to current completion word.
# By convention, it's named "cur" but this isn't strictly necessary.
COMPREPLY=() # Array variable storing the possible completions.
cur=${COMP_WORDS[COMP_CWORD]}
case "$cur" in
-*)
COMPREPLY=( $( compgen -W '-a -d -f -l -t -h --aoption --debug
--file --log --test --help --' -- $cur ) );;
# Generate the completion matches and load them into $COMPREPLY array.
# xx) May add more cases here.
# yy)
# zz)
esac
return 0
}
complete -F _UseGetOpt-2 -o filenames ./UseGetOpt-2.sh
# ^^ ^^^^^^^^^^^^ Invokes the function _UseGetOpt-2.
Now, let's try it.
bash$ source UseGetOpt-2
bash$ ./UseGetOpt-2.sh -[Tab]
-- --aoption --debug --file --help --log --test
-a -d -f -h -l -t
bash$ ./UseGetOpt-2.sh --[Tab]
-- --aoption --debug --file --help --log --test
We begin by sourcing the "completion script." This sets the command-line parameters. [139]
In the first instance, hitting [Tab] after a single dash, the output is all the possible parameters preceded by one
or more dashes. Hitting [Tab] after two dashes gives the possible parameters preceded by two or more dashes.
Now, just what is the point of having to jump through flaming hoops to enable command-line tab completion?
It saves keystrokes. [140]
--
Resources:
Appendix I. An Introduction to Programmable Completion 767](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-773-320.jpg)
![Appendix L. A Sample .bashrc File
The ~/.bashrc file determines the behavior of interactive shells. A good look at this file can lead to a
better understanding of Bash.
Emmanuel Rouat contributed the following very elaborate .bashrc file, written for a Linux system. He
welcomes reader feedback on it.
Study the file carefully, and feel free to reuse code snippets and functions from it in your own .bashrc file
or even in your scripts.
Example L-1. Sample .bashrc file
#=============================================================
#
# PERSONAL $HOME/.bashrc FILE for bash-3.0 (or later)
# By Emmanuel Rouat <no-email>
#
# Last modified: Sun Nov 30 16:27:45 CET 2008
# This file is read (normally) by interactive shells only.
# Here is the place to define your aliases, functions and
# other interactive features like your prompt.
#
# The majority of the code here assumes you are on a GNU
# system (most likely a Linux box) and is based on code found
# on Usenet or internet. See for instance:
#
# http://tldp.org/LDP/abs/html/index.html
# http://www.caliban.org/bash/
# http://www.shelldorado.com/scripts/categories.html
# http://www.dotfiles.org/
#
# This bashrc file is a bit overcrowded -- remember it is just
# just an example. Tailor it to your needs.
#
#
#=============================================================
# --> Comments added by HOWTO author.
#-------------------------------------------------------------
# Source global definitions (if any)
#-------------------------------------------------------------
if [ -f /etc/bashrc ]; then
. /etc/bashrc # --> Read /etc/bashrc, if present.
fi
#-------------------------------------------------------------
# Automatic setting of $DISPLAY (if not set already).
# This works for linux - your mileage may vary. ...
# The problem is that different types of terminals give
# different answers to 'who am i' (rxvt in particular can be
# troublesome).
# I have not found a 'universal' method yet.
Appendix L. A Sample .bashrc File 774](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-780-320.jpg)
![Advanced Bash-Scripting Guide
#-------------------------------------------------------------
function get_xserver ()
{
case $TERM in
xterm )
XSERVER=$(who am i | awk '{print $NF}' | tr -d ')''(' )
# Ane-Pieter Wieringa suggests the following alternative:
# I_AM=$(who am i)
# SERVER=${I_AM#*(}
# SERVER=${SERVER%*)}
XSERVER=${XSERVER%%:*}
;;
aterm | rxvt)
# Find some code that works here. ...
;;
esac
}
if [ -z ${DISPLAY:=""} ]; then
get_xserver
if [[ -z ${XSERVER} || ${XSERVER} == $(hostname) ||
${XSERVER} == "unix" ]]; then
DISPLAY=":0.0" # Display on local host.
else
DISPLAY=${XSERVER}:0.0 # Display on remote host.
fi
fi
export DISPLAY
#-------------------------------------------------------------
# Some settings
#-------------------------------------------------------------
ulimit -S -c 0 # Don't want any coredumps.
set -o notify
set -o noclobber
set -o ignoreeof
set -o nounset
#set -o xtrace # Useful for debuging.
# Enable options:
shopt -s cdspell
shopt -s cdable_vars
shopt -s checkhash
shopt -s checkwinsize
shopt -s sourcepath
shopt -s no_empty_cmd_completion
shopt -s cmdhist
shopt -s histappend histreedit histverify
shopt -s extglob # Necessary for programmable completion.
# Disable options:
shopt -u mailwarn
unset MAILCHECK # Don't want my shell to warn me of incoming mail.
export TIMEFORMAT=$'nreal %3Rtuser %3Utsys %3Stpcpu %Pn'
export HISTTIMEFORMAT="%H:%M > "
export HISTIGNORE="&:bg:fg:ll:h"
Appendix L. A Sample .bashrc File 775](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-781-320.jpg)
![Advanced Bash-Scripting Guide
export HOSTFILE=$HOME/.hosts # Put list of remote hosts in ~/.hosts ...
#-------------------------------------------------------------
# Greeting, motd etc...
#-------------------------------------------------------------
# Define some colors first:
red='e[0;31m'
RED='e[1;31m'
blue='e[0;34m'
BLUE='e[1;34m'
cyan='e[0;36m'
CYAN='e[1;36m'
NC='e[0m' # No Color
# --> Nice. Has the same effect as using "ansi.sys" in DOS.
# Looks best on a terminal with black background.....
echo -e "${CYAN}This is BASH ${RED}${BASH_VERSION%.*}
${CYAN} - DISPLAY on ${RED}$DISPLAY${NC}n"
date
if [ -x /usr/games/fortune ]; then
/usr/games/fortune -s # Makes our day a bit more fun.... :-)
fi
function _exit() # Function to run upon exit of shell.
{
echo -e "${RED}Hasta la vista, baby${NC}"
}
trap _exit EXIT
#-------------------------------------------------------------
# Shell Prompt
#-------------------------------------------------------------
if [[ "${DISPLAY%%:0*}" != "" ]]; then
HILIT=${red} # remote machine: prompt will be partly red
else
HILIT=${cyan} # local machine: prompt will be partly cyan
fi
# --> Replace instances of W with w in prompt functions below
#+ --> to get display of full path name.
function fastprompt()
{
unset PROMPT_COMMAND
case $TERM in
*term | rxvt )
PS1="${HILIT}[h]$NC W > [033]0;${TERM} [u@h] w007]" ;;
linux )
PS1="${HILIT}[h]$NC W > " ;;
*)
PS1="[h] W > " ;;
esac
}
Appendix L. A Sample .bashrc File 776](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-782-320.jpg)
![Advanced Bash-Scripting Guide
_powerprompt()
{
LOAD=$(uptime|sed -e "s/.*: ([^,]*).*/1/" -e "s/ //g")
}
function powerprompt()
{
PROMPT_COMMAND=_powerprompt
case $TERM in
*term | rxvt )
PS1="${HILIT}[A - $LOAD]$NCn[u@h #] W >
[033]0;${TERM} [u@h] w007]" ;;
linux )
PS1="${HILIT}[A - $LOAD]$NCn[u@h #] W > " ;;
* )
PS1="[A - $LOAD]n[u@h #] W > " ;;
esac
}
powerprompt # This is the default prompt -- might be slow.
# If too slow, use fastprompt instead. ...
#===============================================================
#
# ALIASES AND FUNCTIONS
#
# Arguably, some functions defined here are quite big.
# If you want to make this file smaller, these functions can
# be converted into scripts and removed from here.
#
# Many functions were taken (almost) straight from the bash-2.04
# examples.
#
#===============================================================
#-------------------
# Personnal Aliases
#-------------------
alias rm='rm -i'
alias cp='cp -i'
alias mv='mv -i'
# -> Prevents accidentally clobbering files.
alias mkdir='mkdir -p'
alias h='history'
alias j='jobs -l'
alias which='type -a'
alias ..='cd ..'
alias path='echo -e ${PATH//:/n}'
alias libpath='echo -e ${LD_LIBRARY_PATH//:/n}'
alias print='/usr/bin/lp -o nobanner -d $LPDEST'
# Assumes LPDEST is defined (default printer)
alias pjet='enscript -h -G -fCourier9 -d $LPDEST'
# Pretty-print using enscript
alias du='du -kh' # Makes a more readable output.
alias df='df -kTh'
#-------------------------------------------------------------
# The 'ls' family (this assumes you use a recent GNU ls)
Appendix L. A Sample .bashrc File 777](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-783-320.jpg)
![Advanced Bash-Scripting Guide
#-------------------------------------------------------------
alias ll="ls -l --group-directories-first"
alias ls='ls -hF --color' # add colors for filetype recognition
alias la='ls -Al' # show hidden files
alias lx='ls -lXB' # sort by extension
alias lk='ls -lSr' # sort by size, biggest last
alias lc='ls -ltcr' # sort by and show change time, most recent last
alias lu='ls -ltur' # sort by and show access time, most recent last
alias lt='ls -ltr' # sort by date, most recent last
alias lm='ls -al |more' # pipe through 'more'
alias lr='ls -lR' # recursive ls
alias tree='tree -Csu' # nice alternative to 'recursive ls'
# If your version of 'ls' doesn't support --group-directories-first try this:
# function ll(){ ls -l "$@"| egrep "^d" ; ls -lXB "$@" 2>&-|
# egrep -v "^d|total "; }
#-------------------------------------------------------------
# tailoring 'less'
#-------------------------------------------------------------
alias more='less'
export PAGER=less
export LESSCHARSET='latin1'
export LESSOPEN='|/usr/bin/lesspipe.sh %s 2>&-'
# Use this if lesspipe.sh exists
export LESS='-i -N -w -z-4 -g -e -M -X -F -R -P%t?f%f
:stdin .?pb%pb%:?lbLine %lb:?bbByte %bb:-...'
#-------------------------------------------------------------
# spelling typos - highly personnal and keyboard-dependent :-)
#-------------------------------------------------------------
alias xs='cd'
alias vf='cd'
alias moer='more'
alias moew='more'
alias kk='ll'
#-------------------------------------------------------------
# A few fun ones
#-------------------------------------------------------------
function xtitle() # Adds some text in the terminal frame.
{
case "$TERM" in
*term | rxvt)
echo -n -e "033]0;$*007" ;;
*)
;;
esac
}
# aliases that use xtitle
alias top='xtitle Processes on $HOST && top'
alias make='xtitle Making $(basename $PWD) ; make'
alias ncftp="xtitle ncFTP ; ncftp"
Appendix L. A Sample .bashrc File 778](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-784-320.jpg)
![Advanced Bash-Scripting Guide
# .. and functions
function man()
{
for i ; do
xtitle The $(basename $1|tr -d .[:digit:]) manual
command man -F -a "$i"
done
}
#-------------------------------------------------------------
# Make the following commands run in background automatically:
#-------------------------------------------------------------
function te() # Wrapper around xemacs/gnuserv ...
{
if [ "$(gnuclient -batch -eval t 2>&-)" == "t" ]; then
gnuclient -q "$@";
else
( xemacs "$@" &);
fi
}
function soffice() { command soffice "$@" & }
function firefox() { command firefox "$@" & }
function xpdf() { command xpdf "$@" & }
#-------------------------------------------------------------
# File & string-related functions:
#-------------------------------------------------------------
# Find a file with a pattern in name:
function ff() { find . -type f -iname '*'$*'*' -ls ; }
# Find a file with pattern $1 in name and Execute $2 on it:
function fe()
{ find . -type f -iname '*'${1:-}'*' -exec ${2:-file} {} ; ; }
# Find a pattern in a set of files and highlight them:
# (needs a recent version of egrep)
function fstr()
{
OPTIND=1
local case=""
local usage="fstr: find string in files.
Usage: fstr [-i] "pattern" ["filename pattern"] "
while getopts :it opt
do
case "$opt" in
i) case="-i " ;;
*) echo "$usage"; return;;
esac
done
shift $(( $OPTIND - 1 ))
if [ "$#" -lt 1 ]; then
echo "$usage"
return;
fi
find . -type f -name "${2:-*}" -print0 |
xargs -0 egrep --color=always -sn ${case} "$1" 2>&- | more
Appendix L. A Sample .bashrc File 779](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-785-320.jpg)
![Advanced Bash-Scripting Guide
}
function cuttail() # cut last n lines in file, 10 by default
{
nlines=${2:-10}
sed -n -e :a -e "1,${nlines}!{P;N;D;};N;ba" $1
}
function lowercase() # move filenames to lowercase
{
for file ; do
filename=${file##*/}
case "$filename" in
*/*) dirname==${file%/*} ;;
*) dirname=.;;
esac
nf=$(echo $filename | tr A-Z a-z)
newname="${dirname}/${nf}"
if [ "$nf" != "$filename" ]; then
mv "$file" "$newname"
echo "lowercase: $file --> $newname"
else
echo "lowercase: $file not changed."
fi
done
}
function swap() # Swap 2 filenames around, if they exist
{ #(from Uzi's bashrc).
local TMPFILE=tmp.$$
[ $# -ne 2 ] && echo "swap: 2 arguments needed" && return 1
[ ! -e $1 ] && echo "swap: $1 does not exist" && return 1
[ ! -e $2 ] && echo "swap: $2 does not exist" && return 1
mv "$1" $TMPFILE
mv "$2" "$1"
mv $TMPFILE "$2"
}
function extract() # Handy Extract Program.
{
if [ -f $1 ] ; then
case $1 in
*.tar.bz2) tar xvjf $1 ;;
*.tar.gz) tar xvzf $1 ;;
*.bz2) bunzip2 $1 ;;
*.rar) unrar x $1 ;;
*.gz) gunzip $1 ;;
*.tar) tar xvf $1 ;;
*.tbz2) tar xvjf $1 ;;
*.tgz) tar xvzf $1 ;;
*.zip) unzip $1 ;;
*.Z) uncompress $1 ;;
*.7z) 7z x $1 ;;
*) echo "'$1' cannot be extracted via >extract<" ;;
esac
else
echo "'$1' is not a valid file"
fi
Appendix L. A Sample .bashrc File 780](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-786-320.jpg)
![Advanced Bash-Scripting Guide
}
#-------------------------------------------------------------
# Process/system related functions:
#-------------------------------------------------------------
function my_ps() { ps $@ -u $USER -o pid,%cpu,%mem,bsdtime,command ; }
function pp() { my_ps f | awk '!/awk/ && $0~var' var=${1:-".*"} ; }
function killps() # Kill by process name.
{
local pid pname sig="-TERM" # Default signal.
if [ "$#" -lt 1 ] || [ "$#" -gt 2 ]; then
echo "Usage: killps [-SIGNAL] pattern"
return;
fi
if [ $# = 2 ]; then sig=$1 ; fi
for pid in $(my_ps| awk '!/awk/ && $0~pat { print $1 }' pat=${!#} ) ; do
pname=$(my_ps | awk '$1~var { print $5 }' var=$pid )
if ask "Kill process $pid <$pname> with signal $sig?"
then kill $sig $pid
fi
done
}
function my_ip() # Get IP adresses.
{
MY_IP=$(/sbin/ifconfig ppp0 | awk '/inet/ { print $2 } ' |
sed -e s/addr://)
MY_ISP=$(/sbin/ifconfig ppp0 | awk '/P-t-P/ { print $3 } ' |
sed -e s/P-t-P://)
}
function ii() # Get current host related info.
{
echo -e "nYou are logged on ${RED}$HOST"
echo -e "nAdditionnal information:$NC " ; uname -a
echo -e "n${RED}Users logged on:$NC " ; w -h
echo -e "n${RED}Current date :$NC " ; date
echo -e "n${RED}Machine stats :$NC " ; uptime
echo -e "n${RED}Memory stats :$NC " ; free
my_ip 2>&- ;
echo -e "n${RED}Local IP Address :$NC" ; echo ${MY_IP:-"Not connected"}
echo -e "n${RED}ISP Address :$NC" ; echo ${MY_ISP:-"Not connected"}
echo -e "n${RED}Open connections :$NC "; netstat -pan --inet;
echo
}
#-------------------------------------------------------------
# Misc utilities:
#-------------------------------------------------------------
function repeat() # Repeat n times command.
{
local i max
max=$1; shift;
for ((i=1; i <= max ; i++)); do # --> C-like syntax
eval "$@";
done
}
Appendix L. A Sample .bashrc File 781](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-787-320.jpg)
![Advanced Bash-Scripting Guide
function ask() # See 'killps' for example of use.
{
echo -n "$@" '[y/n] ' ; read ans
case "$ans" in
y*|Y*) return 0 ;;
*) return 1 ;;
esac
}
function corename() # Get name of app that created a corefile.
{
for file ; do
echo -n $file : ; gdb --core=$file --batch | head -1
done
}
#=========================================================================
# PROGRAMMABLE COMPLETION - ONLY SINCE BASH-2.04
# Most are taken from the bash 2.05 documentation and from Ian McDonald's
# 'Bash completion' package (http://www.caliban.org/bash/#completion).
# You will in fact need bash more recent than 3.0 for some features.
#=========================================================================
if [ "${BASH_VERSION%.*}" < "3.0" ]; then
echo "You will need to upgrade to version 3.0
for full programmable completion features."
return
fi
shopt -s extglob # Necessary,
#set +o nounset # otherwise some completions will fail.
complete -A hostname rsh rcp telnet rlogin r ftp ping disk
complete -A export printenv
complete -A variable export local readonly unset
complete -A enabled builtin
complete -A alias alias unalias
complete -A function function
complete -A user su mail finger
complete -A helptopic help # Currently, same as builtins.
complete -A shopt shopt
complete -A stopped -P '%' bg
complete -A job -P '%' fg jobs disown
complete -A directory mkdir rmdir
complete -A directory -o default cd
# Compression
complete -f -o default -X '*.+(zip|ZIP)' zip
complete -f -o default -X '!*.+(zip|ZIP)' unzip
complete -f -o default -X '*.+(z|Z)' compress
complete -f -o default -X '!*.+(z|Z)' uncompress
complete -f -o default -X '*.+(gz|GZ)' gzip
complete -f -o default -X '!*.+(gz|GZ)' gunzip
complete -f -o default -X '*.+(bz2|BZ2)' bzip2
complete -f -o default -X '!*.+(bz2|BZ2)' bunzip2
Appendix L. A Sample .bashrc File 782](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-788-320.jpg)
![Advanced Bash-Scripting Guide
complete -f -o default -X '!*.+(zip|ZIP|z|Z|gz|GZ|bz2|BZ2)' extract
# Documents - Postscript,pdf,dvi.....
complete -f -o default -X '!*.+(ps|PS)' gs ghostview ps2pdf ps2ascii
complete -f -o default -X '!*.+(dvi|DVI)' dvips dvipdf xdvi dviselect dvitype
complete -f -o default -X '!*.+(pdf|PDF)' acroread pdf2ps
complete -f -o default -X
'!*.@(@(?(e)ps|?(E)PS|pdf|PDF)?(.gz|.GZ|.bz2|.BZ2|.Z))' gv ggv
complete -f -o default -X '!*.texi*' makeinfo texi2dvi texi2html texi2pdf
complete -f -o default -X '!*.tex' tex latex slitex
complete -f -o default -X '!*.lyx' lyx
complete -f -o default -X '!*.+(htm*|HTM*)' lynx html2ps
complete -f -o default -X
'!*.+(doc|DOC|xls|XLS|ppt|PPT|sx?|SX?|csv|CSV|od?|OD?|ott|OTT)' soffice
# Multimedia
complete -f -o default -X
'!*.+(gif|GIF|jp*g|JP*G|bmp|BMP|xpm|XPM|png|PNG)' xv gimp ee gqview
complete -f -o default -X '!*.+(mp3|MP3)' mpg123 mpg321
complete -f -o default -X '!*.+(ogg|OGG)' ogg123
complete -f -o default -X
'!*.@(mp[23]|MP[23]|ogg|OGG|wav|WAV|pls|m3u|xm|mod|s[3t]m|it|mtm|ult|flac)' xmms
complete -f -o default -X
'!*.@(mp?(e)g|MP?(E)G|wma|avi|AVI|asf|vob|VOB|bin|dat|vcd|
ps|pes|fli|viv|rm|ram|yuv|mov|MOV|qt|QT|wmv|mp3|MP3|ogg|OGG|
ogm|OGM|mp4|MP4|wav|WAV|asx|ASX)' xine
complete -f -o default -X '!*.pl' perl perl5
# This is a 'universal' completion function - it works when commands have
# a so-called 'long options' mode , ie: 'ls --all' instead of 'ls -a'
# Needs the '-o' option of grep
# (try the commented-out version if not available).
# First, remove '=' from completion word separators
# (this will allow completions like 'ls --color=auto' to work correctly).
COMP_WORDBREAKS=${COMP_WORDBREAKS/=/}
_get_longopts()
{
#$1 --help | sed -e '/--/!d' -e 's/.*--([^[:space:].,]*).*/--1/'|
#grep ^"$2" |sort -u ;
$1 --help | grep -o -e "--[^[:space:].,]*" | grep -e "$2" |sort -u
}
_longopts()
{
local cur
cur=${COMP_WORDS[COMP_CWORD]}
case "${cur:-*}" in
-*) ;;
*) return ;;
esac
case "$1" in
Appendix L. A Sample .bashrc File 783](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-789-320.jpg)
![Advanced Bash-Scripting Guide
~*) eval cmd="$1" ;;
*) cmd="$1" ;;
esac
COMPREPLY=( $(_get_longopts ${1} ${cur} ) )
}
complete -o default -F _longopts configure bash
complete -o default -F _longopts wget id info a2ps ls recode
_tar()
{
local cur ext regex tar untar
COMPREPLY=()
cur=${COMP_WORDS[COMP_CWORD]}
# If we want an option, return the possible long options.
case "$cur" in
-*) COMPREPLY=( $(_get_longopts $1 $cur ) ); return 0;;
esac
if [ $COMP_CWORD -eq 1 ]; then
COMPREPLY=( $( compgen -W 'c t x u r d A' -- $cur ) )
return 0
fi
case "${COMP_WORDS[1]}" in
?(-)c*f)
COMPREPLY=( $( compgen -f $cur ) )
return 0
;;
+([^Izjy])f)
ext='tar'
regex=$ext
;;
*z*f)
ext='tar.gz'
regex='t(ar.)(gz|Z)'
;;
*[Ijy]*f)
ext='t?(ar.)bz?(2)'
regex='t(ar.)bz2?'
;;
*)
COMPREPLY=( $( compgen -f $cur ) )
return 0
;;
esac
if [[ "$COMP_LINE" == tar*.$ext' '* ]]; then
# Complete on files in tar file.
#
# Get name of tar file from command line.
tar=$( echo "$COMP_LINE" |
sed -e 's|^.* ([^ ]*'$regex') .*$|1|' )
# Devise how to untar and list it.
untar=t${COMP_WORDS[1]//[^Izjyf]/}
COMPREPLY=( $( compgen -W "$( echo $( tar $untar $tar
2>/dev/null ) )" -- "$cur" ) )
return 0
Appendix L. A Sample .bashrc File 784](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-790-320.jpg)
![Advanced Bash-Scripting Guide
else
# File completion on relevant files.
COMPREPLY=( $( compgen -G $cur*.$ext ) )
fi
return 0
}
complete -F _tar -o default tar
_make()
{
local mdef makef makef_dir="." makef_inc gcmd cur prev i;
COMPREPLY=();
cur=${COMP_WORDS[COMP_CWORD]};
prev=${COMP_WORDS[COMP_CWORD-1]};
case "$prev" in
-*f)
COMPREPLY=($(compgen -f $cur ));
return 0
;;
esac;
case "$cur" in
-*)
COMPREPLY=($(_get_longopts $1 $cur ));
return 0
;;
esac;
# make reads `GNUmakefile', then `makefile', then `Makefile'
if [ -f ${makef_dir}/GNUmakefile ]; then
makef=${makef_dir}/GNUmakefile
elif [ -f ${makef_dir}/makefile ]; then
makef=${makef_dir}/makefile
elif [ -f ${makef_dir}/Makefile ]; then
makef=${makef_dir}/Makefile
else
makef=${makef_dir}/*.mk # Local convention.
fi
# Before we scan for targets, see if a Makefile name was
# specified with -f ...
for (( i=0; i < ${#COMP_WORDS[@]}; i++ )); do
if [[ ${COMP_WORDS[i]} == -f ]]; then
# eval for tilde expansion
eval makef=${COMP_WORDS[i+1]}
break
fi
done
[ ! -f $makef ] && return 0
# deal with included Makefiles
makef_inc=$( grep -E '^-?include' $makef |
sed -e "s,^.* ,"$makef_dir"/," )
for file in $makef_inc; do
[ -f $file ] && makef="$makef $file"
done
Appendix L. A Sample .bashrc File 785](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-791-320.jpg)
![Advanced Bash-Scripting Guide
# If we have a partial word to complete, restrict completions to
# matches of that word.
if [ -n "$cur" ]; then gcmd='grep "^$cur"' ; else gcmd=cat ; fi
COMPREPLY=( $( awk -F':' '/^[a-zA-Z0-9][^$#/t=]*:([^=]|$)/
{split($1,A,/ /);for(i in A)print A[i]}'
$makef 2>/dev/null | eval $gcmd ))
}
complete -F _make -X '+($*|*.[cho])' make gmake pmake
_killall()
{
local cur prev
COMPREPLY=()
cur=${COMP_WORDS[COMP_CWORD]}
# get a list of processes (the first sed evaluation
# takes care of swapped out processes, the second
# takes care of getting the basename of the process)
COMPREPLY=( $( /usr/bin/ps -u $USER -o comm |
sed -e '1,1d' -e 's#[][]##g' -e 's#^.*/##'|
awk '{if ($0 ~ /^'$cur'/) print $0}' ))
return 0
}
complete -F _killall killall killps
# A meta-command completion function for commands like sudo(8), which need to
# first complete on a command, then complete according to that command's own
# completion definition - currently not quite foolproof,
# but still quite useful (By Ian McDonald, modified by me).
_meta_comp()
{
local cur func cline cspec
COMPREPLY=()
cur=${COMP_WORDS[COMP_CWORD]}
cmdline=${COMP_WORDS[@]}
if [ $COMP_CWORD = 1 ]; then
COMPREPLY=( $( compgen -c $cur ) )
else
cmd=${COMP_WORDS[1]} # Find command.
cspec=$( complete -p ${cmd} ) # Find spec of that command.
# COMP_CWORD and COMP_WORDS() are not read-only,
# so we can set them before handing off to regular
# completion routine:
# Get current command line minus initial command,
cline="${COMP_LINE#$1 }"
# split current command line tokens into array,
COMP_WORDS=( $cline )
# set current token number to 1 less than now.
Appendix L. A Sample .bashrc File 786](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-792-320.jpg)
![Advanced Bash-Scripting Guide
COMP_CWORD=$(( $COMP_CWORD - 1 ))
# If current arg is empty, add it to COMP_WORDS array
# (otherwise that information will be lost).
if [ -z $cur ]; then COMP_WORDS[COMP_CWORD]="" ; fi
if [ "${cspec%%-F *}" != "${cspec}" ]; then
# if -F then get function:
func=${cspec#*-F }
func=${func%% *}
eval $func $cline # Evaluate it.
else
func=$( echo $cspec | sed -e 's/^complete//' -e 's/[^ ]*$//' )
COMPREPLY=( $( eval compgen $func $cur ) )
fi
fi
}
complete -o default -F _meta_comp nohup
eval exec trace truss strace sotruss gdb
complete -o default -F _meta_comp command type which man nice time
# Local Variables:
# mode:shell-script
# sh-shell:bash
# End:
Appendix L. A Sample .bashrc File 787](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-793-320.jpg)
![Appendix M. Converting DOS Batch Files to Shell
Scripts
Quite a number of programmers learned scripting on a PC running DOS. Even the crippled DOS batch file
language allowed writing some fairly powerful scripts and applications, though they often required extensive
kludges and workarounds. Occasionally, the need still arises to convert an old DOS batch file to a UNIX shell
script. This is generally not difficult, as DOS batch file operators are only a limited subset of the equivalent
shell scripting ones.
Table M-1. Batch file keywords / variables / operators, and their shell equivalents
Batch File Operator Shell Script Equivalent Meaning
% $ command-line parameter prefix
/ - command option flag
/ directory path separator
== = (equal-to) string comparison test
!==! != (not equal-to) string comparison
test
| | pipe
@ set +v do not echo current command
* * filename "wild card"
> > file redirection (overwrite)
>> >> file redirection (append)
< < redirect stdin
%VAR% $VAR environmental variable
REM # comment
NOT ! negate following test
NUL /dev/null "black hole" for burying
command output
ECHO echo echo (many more option in
Bash)
ECHO. echo echo blank line
ECHO OFF set +v do not echo command(s)
following
FOR %%VAR IN (LIST) DO for var in [list]; do "for" loop
:LABEL none (unnecessary) label
GOTO none (use a function) jump to another location in the
script
PAUSE sleep pause or wait an interval
CHOICE case or select menu choice
IF if if-test
Appendix M. Converting DOS Batch Files to Shell Scripts 788](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-794-320.jpg)
![Advanced Bash-Scripting Guide
IF EXIST FILENAME if [ -e filename ] test if file exists
IF !%N==! if [ -z "$N" ] if replaceable parameter "N" not
present
CALL source or . (dot operator) "include" another script
COMMAND /C source or . (dot operator) "include" another script (same
as CALL)
SET export set an environmental variable
SHIFT shift left shift command-line
argument list
SGN -lt or -gt sign (of integer)
ERRORLEVEL $? exit status
CON stdin "console" (stdin)
PRN /dev/lp0 (generic) printer device
LPT1 /dev/lp0 first printer device
COM1 /dev/ttyS0 first serial port
Batch files usually contain DOS commands. These must be translated into their UNIX equivalents in order to
convert a batch file into a shell script.
Table M-2. DOS commands and their UNIX equivalents
DOS Command UNIX Equivalent Effect
ASSIGN ln link file or
directory
ATTRIB chmod change file
permissions
CD cd change directory
CHDIR cd change directory
CLS clear clear screen
COMP diff, comm, cmp file compare
COPY cp file copy
Ctl-C Ctl-C break (signal)
Ctl-Z Ctl-D EOF (end-of-file)
DEL rm delete file(s)
DELTREE rm -rf delete directory
recursively
DIR ls -l directory listing
ERASE rm delete file(s)
EXIT exit exit current
process
FC comm, cmp file compare
FIND grep find strings in files
MD mkdir make directory
Appendix M. Converting DOS Batch Files to Shell Scripts 789](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-795-320.jpg)
![Advanced Bash-Scripting Guide
MKDIR mkdir make directory
MORE more text file paging
filter
MOVE mv move
PATH $PATH path to executables
REN mv rename (move)
RENAME mv rename (move)
RD rmdir remove directory
RMDIR rmdir remove directory
SORT sort sort file
TIME date display system
time
TYPE cat output file to
stdout
XCOPY cp (extended) file
copy
Virtually all UNIX and shell operators and commands have many more options and enhancements than
their DOS and batch file counterparts. Many DOS batch files rely on auxiliary utilities, such as ask.com,
a crippled counterpart to read.
DOS supports only a very limited and incompatible subset of filename wild-card expansion, recognizing
just the * and ? characters.
Converting a DOS batch file into a shell script is generally straightforward, and the result ofttimes reads better
than the original.
Example M-1. VIEWDATA.BAT: DOS Batch File
REM VIEWDATA
REM INSPIRED BY AN EXAMPLE IN "DOS POWERTOOLS"
REM BY PAUL SOMERSON
@ECHO OFF
IF !%1==! GOTO VIEWDATA
REM IF NO COMMAND-LINE ARG...
FIND "%1" C:BOZOBOOKLIST.TXT
GOTO EXIT0
REM PRINT LINE WITH STRING MATCH, THEN EXIT.
:VIEWDATA
TYPE C:BOZOBOOKLIST.TXT | MORE
REM SHOW ENTIRE FILE, 1 PAGE AT A TIME.
:EXIT0
The script conversion is somewhat of an improvement. [141]
Appendix M. Converting DOS Batch Files to Shell Scripts 790](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-796-320.jpg)
![Advanced Bash-Scripting Guide
Example M-2. viewdata.sh: Shell Script Conversion of VIEWDATA.BAT
#!/bin/bash
# viewdata.sh
# Conversion of VIEWDATA.BAT to shell script.
DATAFILE=/home/bozo/datafiles/book-collection.data
ARGNO=1
# @ECHO OFF Command unnecessary here.
if [ $# -lt "$ARGNO" ] # IF !%1==! GOTO VIEWDATA
then
less $DATAFILE # TYPE C:MYDIRBOOKLIST.TXT | MORE
else
grep "$1" $DATAFILE # FIND "%1" C:MYDIRBOOKLIST.TXT
fi
exit 0 # :EXIT0
# GOTOs, labels, smoke-and-mirrors, and flimflam unnecessary.
# The converted script is short, sweet, and clean,
#+ which is more than can be said for the original.
Ted Davis' Shell Scripts on the PC site has a set of comprehensive tutorials on the old-fashioned art of batch
file programming. Certain of his ingenious techniques could conceivably have relevance for shell scripts.
Appendix M. Converting DOS Batch Files to Shell Scripts 791](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-797-320.jpg)
![Appendix N. Exercises
The exercises that follow test and extend your knowledge of scripting. Think of them as a challenge, as an
entertaining way to take you further along the stony path toward UNIX wizardry.
On a dingy side street in a run-down section of Hoboken, New Jersey,
there sits a nondescript squat two-story brick building with an inscriptio
incised on a marble plate in its wall:
Bash Scripting Hall of Fame.
Inside, among various dusty uninteresting exhibits is a corroding,
cobweb-festooned brass plaque inscribed with a short, very short
list of those few persons who have successfully mastered the material
in the Advanced Bash Scripting
Guide, as evidenced by their performance
on the following Exercise sections.
(Alas, the author of the ABS
Guide is not represented among the exhibits.
This is possibly due to malicious rumors about lack of
credentials and
deficient scripting skills.)
N.1. Analyzing Scripts
Examine the following script. Run it, then explain what it does. Annotate the script and rewrite it in a more
compact and elegant manner.
#!/bin/bash
MAX=10000
for((nr=1; nr<$MAX; nr++))
do
let "t1 = nr % 5"
if [ "$t1" -ne 3 ]
then
continue
fi
let "t2 = nr % 7"
if [ "$t2" -ne 4 ]
then
continue
fi
let "t3 = nr % 9"
if [ "$t3" -ne 5 ]
then
Appendix N. Exercises 792](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-798-320.jpg)
![Advanced Bash-Scripting Guide
o | x |
----------
| x |
----------
| o |
Your move, human (row, column)?
Alphabetizing a String
Alphabetize (in ASCII order) an arbitrary string read from the command-line.
Parsing
Parse /etc/passwd, and output its contents in nice, easy-to-read tabular form.
Logging Logins
Parse /var/log/messages to produce a nicely formatted file of user logins and login times. The
script may need to run as root. (Hint: Search for the string "LOGIN.")
Pretty-Printing a Data File
Certain database and spreadsheet packages use save-files with comma-separated values (CSVs).
Other applications often need to parse these files.
Given a data file with comma-separated fields, of the form:
Jones,Bill,235 S. Williams St.,Denver,CO,80221,(303) 244-7989
Smith,Tom,404 Polk Ave.,Los Angeles,CA,90003,(213) 879-5612
...
Reformat the data and print it out to stdout in labeled, evenly-spaced columns.
Justification
Given ASCII text input either from stdin or a file, adjust the word spacing to right-justify each line
to a user-specified line-width, then send the output to stdout.
Mailing List
Using the mail command, write a script that manages a simple mailing list. The script automatically
e-mails the monthly company newsletter, read from a specified text file, and sends it to all the
addresses on the mailing list, which the script reads from another specified file.
Generating Passwords
Generate pseudorandom 8-character passwords, using characters in the ranges [0-9], [A-Z], [a-z].
Each password must contain at least two digits.
Monitoring a User
You suspect that one particular user on the network has been abusing his privileges and possibly
attempting to hack the system. Write a script to automatically monitor and log his activities when he's
signed on. The log file will save entries for the previous week, and delete those entries more than
seven days old.
You may use last, lastlog, and lastcomm to aid your surveillance of the suspected malefactor.
Checking for Broken Links
Using lynx with the -traversal option, write a script that checks a Web site for broken links.
DIFFICULT
Testing Passwords
Write a script to check and validate passwords. The object is to flag "weak" or easily guessed
password candidates.
A trial password will be input to the script as a command-line parameter. To be considered
acceptable, a password must meet the following minimum qualifications:
Appendix N. Exercises 797](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-803-320.jpg)
![Advanced Bash-Scripting Guide
◊ Minimum length of 8 characters
◊ Must contain at least one numeric character
◊ Must contain at least one of the following non-alphabetic characters: @, #, $, %, &, *, +, -, =
Optional:
◊ Do a dictionary check on every sequence of at least four consecutive alphabetic characters in
the password under test. This will eliminate passwords containing embedded "words" found
in a standard dictionary.
◊ Enable the script to check all the passwords on your system. These probably do not reside in
/etc/passwd.
This exercise tests mastery of Regular Expressions.
Cross Reference
Write a script that generates a cross-reference (concordance) on a target file. The output will be a
listing of all word occurrences in the target file, along with the line numbers in which each word
occurs. Traditionally, linked list constructs would be used in such applications. Therefore, you should
investigate arrays in the course of this exercise. Example 15-12 is probably not a good place to start.
Square Root
Write a script to calculate square roots of numbers using Newton's Method.
The algorithm for this, expressed as a snippet of Bash pseudo-code is:
# (Isaac) Newton's Method for speedy extraction
#+ of square roots.
guess = $argument
# $argument is the number to find the square root of.
# $guess is each successive calculated "guess" -- or trial solution --
#+ of the square root.
# Our first "guess" at a square root is the argument itself.
oldguess = 0
# $oldguess is the previous $guess.
tolerance = .000001
# To how close a tolerance we wish to calculate.
loopcnt = 0
# Let's keep track of how many times through the loop.
# Some arguments will require more loop iterations than others.
while [ ABS( $guess $oldguess ) -gt $tolerance ]
# ^^^^^^^^^^^^^^^^^^^^^^^ Fix up syntax, of course.
# "ABS" is a (floating point) function to find the absolute value
#+ of the difference between the two terms.
# So, as long as difference between current and previous
#+ trial solution (guess) exceeds the tolerance, keep looping.
do
oldguess = $guess # Update $oldguess to previous $guess.
# =======================================================
guess = ( $oldguess + ( $argument / $oldguess ) ) / 2.0
# = 1/2 ( ($oldguess **2 + $argument) / $oldguess )
# equivalent to:
# = 1/2 ( $oldguess + $argument / $oldguess )
Appendix N. Exercises 798](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-804-320.jpg)
![Advanced Bash-Scripting Guide
Example A-39 is an instructive first step.
Morse Code
Convert a text file to Morse code. Each character of the text file will be represented as a
corresponding Morse code group of dots and dashes (underscores), separated by whitespace from the
next. For example:
Invoke the "morse.sh" script with "script"
as an argument to convert to Morse.
$ sh morse.sh script
... _._. ._. .. .__. _
s c r i p t
Hex Dump
Do a hex(adecimal) dump on a binary file specified as an argument. The output should be in neat
tabular fields, with the first field showing the address, each of the next 8 fields a 4-byte hex number,
and the final field the ASCII equivalent of the previous 8 fields.
The obvious followup to this is to extend the hex dump script into a disassembler. Using a lookup
table, or some other clever gimmick, convert the hex values into 80x86 op codes.
Emulating a Shift Register
Using Example 26-15 as an inspiration, write a script that emulates a 64-bit shift register as an array.
Implement functions to load the register, shift left, shift right, and rotate it. Finally, write a function
that interprets the register contents as eight 8-bit ASCII characters.
Calculating Determinants
Write a script that calculates determinants [142] by recursively expanding the minors. Use a 4 x 4
determinant as a test case.
Hidden Words
Write a "word-find" puzzle generator, a script that hides 10 input words in a 10 x 10 array of random
letters. The words may be hidden across, down, or diagonally.
Optional: Write a script that solves word-find puzzles. To keep this from becoming too difficult, the
solution script will find only horizontal and vertical words. (Hint: Treat each row and column as a
string, and search for substrings.)
Anagramming
Anagram 4-letter input. For example, the anagrams of word are: do or rod row word. You may use
/usr/share/dict/linux.words as the reference list.
Word Ladders
A "word ladder" is a sequence of words, with each successive word in the sequence differing from the
previous one by a single letter.
For example, to "ladder" from mark to vase:
mark --> park --> part --> past --> vast --> vase
^ ^ ^ ^ ^
Write a script that solves word ladder puzzles. Given a starting and an ending word, the script will list
all intermediate steps in the "ladder." Note that all words in the sequence must be legitimate
dictionary words.
Fog Index
The "fog index" of a passage of text estimates its reading difficulty, as a number corresponding
roughly to a school grade level. For example, a passage with a fog index of 12 should be
Appendix N. Exercises 800](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-806-320.jpg)
![Appendix Q. To Do List
• A comprehensive survey of incompatibilities between Bash and the classic Bourne shell.
• Same as above, but for the Korn shell (ksh).
• A primer on CGI programming, using Bash.
Here is a simple CGI script to get you started.
Example Q-1. Print the server environment
#!/bin/bash
# May have to change the location for your site.
# (At the ISP's servers, Bash may not be in the usual place.)
# Other places: /usr/bin or /usr/local/bin
# Might even try it without any path in sha-bang.
# test-cgi.sh
# by Michael Zick
# Used with permission
# Disable filename globbing.
set -f
# Header tells browser what to expect.
echo Content-type: text/plain
echo
echo CGI/1.0 test script report:
echo
echo environment settings:
set
echo
echo whereis bash?
whereis bash
echo
echo who are we?
echo ${BASH_VERSINFO[*]}
echo
echo argc is $#. argv is "$*".
echo
# CGI/1.0 expected environment variables.
echo SERVER_SOFTWARE = $SERVER_SOFTWARE
echo SERVER_NAME = $SERVER_NAME
echo GATEWAY_INTERFACE = $GATEWAY_INTERFACE
echo SERVER_PROTOCOL = $SERVER_PROTOCOL
echo SERVER_PORT = $SERVER_PORT
echo REQUEST_METHOD = $REQUEST_METHOD
echo HTTP_ACCEPT = "$HTTP_ACCEPT"
echo PATH_INFO = "$PATH_INFO"
echo PATH_TRANSLATED = "$PATH_TRANSLATED"
Appendix Q. To Do List 808](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-814-320.jpg)
![Appendix R. Copyright
The Advanced Bash Scripting Guide is copyright © 2000, by Mendel Cooper. [143] The author also asserts
copyright on all previous versions of this document. [144]
This blanket copyright recognizes and protects the rights of all contributors to this document.
This document may only be distributed subject to the terms and conditions set forth in the Open Publication
License (version 1.0 or later), http://www.opencontent.org/openpub/. The following license options also
apply.
A. Distribution of substantively modified versions of this document
is permitted only under the following provisions.
A1. The modified document must clearly indicate that it is derivative
of the original Advanced Bash Scripting Guide, and the original
author, Mendel Cooper, must be listed as the primary author.
A2. The modified or derivative document must clearly indicate which portions
of the text differ or deviate from the original document. A notice must
be present, stating that the original author does not necessarily
endorse the changes to the original.
A3. The modified or derivative document must be distributed under this
same license, and the original author's copyright, as applicable,
may not be modified.
B. This document, or any modified or derivative version thereof, may
NOT be distributed encrypted or with any form of DRM (Digital Rights
Management) or content-control mechanism embedded in it. Nor may this
document or any derivative thereof be bundled with other DRM-ed works.
C. If this document (or any previous version or derivative thereof)
is made available on a Web or ftp site, then the file(s) must be
publicly accessible. No password or other access restrictions to
its download may be imposed.
D. Distribution of the original work in any standard (paper) book form
requires permission from the copyright holder.
E. In the event that the author or maintainer of this document cannot
be contacted, the Linux Documentation Project is authorized to
take over custodianship of the document and name a new maintainer,
who would then have the right to update and modify the document.
Without explicit written permission from the author, distributors and publishers (including on-line publishers)
are prohibited from imposing any additional conditions, strictures, or provisions on this document, any
previous versions, or any derivative versions. As of this update, the author asserts that he has not entered into
any contractual obligations that would alter the foregoing declarations.
Essentially, you may freely distribute this book or any derivative thereof in electronic form.
If you display or distribute this document, any previous versions thereof, or any derivatives thereof under any
license except the one above, then you are required to obtain the author's written permission. Failure to do so
may terminate your distribution rights.
Appendix R. Copyright 810](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-816-320.jpg)
![Appendix S. ASCII Table
In a book of this sort it is traditional to have an ASCII Table appendix. This book does not. Instead, here is a
short shell script that generates a complete ASCII table and writes it to the file ASCII.txt.
Example S-1. A script that generates an ASCII table
#!/bin/bash
# ascii.sh
# ver. 0.2, reldate 26 Aug 2008
# Patched by ABS Guide author.
# Original script by Sebastian Arming.
# Used with permission (thanks!).
exec >ASCII.txt # Save stdout to file,
#+ as in the example scripts
#+ reassign-stdout.sh and upperconv.sh.
MAXNUM=256
COLUMNS=5
OCT=8
OCTSQU=64
LITTLESPACE=-3
BIGSPACE=-5
i=1 # Decimal counter
o=1 # Octal counter
while [ "$i" -lt "$MAXNUM" ]; do # We don't have to count past 400 octal.
paddi=" $i"
echo -n "${paddi: $BIGSPACE} " # Column spacing.
paddo="00$o"
# echo -ne "${paddo: $LITTLESPACE}" # Original.
echo -ne "0${paddo: $LITTLESPACE}" # Fixup.
# ^
echo -n " "
if (( i % $COLUMNS == 0)); then # New line.
echo
fi
((i++, o++))
# The octal notation for 8 is 10, and 64 decimal is 100 octal.
(( i % $OCT == 0)) && ((o+=2))
(( i % $OCTSQU == 0)) && ((o+=20))
done
exit $?
# Compare this script with the "pr-asc.sh" example.
# This one handles "unprintable" characters.
# Exercise:
# Rewrite this script to use decimal numbers, rather than octal.
Appendix S. ASCII Table 812](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-818-320.jpg)
![Advanced Bash-Scripting Guide
• (( ... )) Double parentheses, in arithmetic expansion
[ Left bracket, test construct
[ ]Brackets
• Array element
• Enclose character set to match in a Regular Expression
• Test construct
[[ ... ]] Double brackets, extended test construct
$ Anchor, in a Regular Expression
$ Prefix to a variable name
$( ... ) Command substitution, setting a variable with output of a command, using parentheses notation
` ... ` Command substitution, using backquotes notation
$[ ... ] Integer expansion (deprecated)
${ ... } Variable manipulation / evaluation
• ${var} Value of a variable
• ${#var} Length of a variable
• ${#@}
${#*} Number of positional parameters
• ${parameter?err_msg} Parameter-unset message
• ${parameter-default}
${parameter:-default}
${parameter=default}
${parameter:=default} Set default parameter
• ${parameter+alt_value}
${parameter:+alt_value}
Alternate value of parameter, if set
• ${!var}
Indirect referencing of a variable, new notation
• ${!#}
Final positional parameter. (This is an indirect reference to $#.)
• ${!varprefix*}
${!varprefix@}
Appendix S. ASCII Table 816](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-822-320.jpg)
![Advanced Bash-Scripting Guide
Example script
Using command substitution
• Loading a file into an array
• Multidimensional, simulating
• Nesting and embedding
• Notation and usage
• Number of elements in
${#array_name[@]}
${#array_name[*]}
• Operations
• Passing an array to a function
• As return value from a function
• Special properties, example script
• String operations, example script
• unset deletes array elements
Arrow keys, detecting
ASCII table
awk field-oriented text processing language
• rand(), random function
• String manipulation
• Using export to pass a variable to an embedded awk script
***
Backquotes, used in command substitution
Base conversion, example script
Bash
• Bad scripting practices
• Basics reviewed, script example
• Command-line options
Table
• Features that classic Bourne shell lacks
• Internal variables
• Version 2
• Version 3
• Version 4
.bashrc
$BASH_SUBSHELL
Appendix S. ASCII Table 820](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-826-320.jpg)
![Advanced Bash-Scripting Guide
Basic commands, external
Batch files, DOS
Batch processing
bc, calculator utility
• In a here document
• Template for calculating a script variable
Bibliography
Bison utility
Bitwise operators
Block devices
• testing for
Blocks of code
• Redirection
Script example: redirecting output of a a code block
Brace expansion
• Extended, {a..z}
• With increment and zero-padding (new feature in Bash, version 4)
Brackets, [ ]
• Array element
• Enclose character set to match in a Regular Expression
• Test construct
Brackets, curly, {}, used in
• Code block
• find
• Extended Regular Expressions
• Positional parameters
• xargs
break loop control command
• Parameter (optional)
Builtins in Bash
Appendix S. ASCII Table 821](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-827-320.jpg)
![Advanced Bash-Scripting Guide
• Conversions
• Copying raw data to/from devices
• File deletion, secure
• Keystrokes, capturing
• Options
• Random access on a data stream
• Swapfiles, initializing
• Thread on www.linuxquestions.org
Debugging scripts
• Tools
• Trapping at exit
• Trapping signals
Decimal number, Bash interprets numbers as
declare builtin
• options
case-modification options (version 4+ of Bash)
Default parameters
/dev directory
• /dev/null pseudo-device file
• /dev/urandom pseudo-device file, generating pseudorandom numbers with
• /dev/zero, pseudo-device file
Device file
dialog, utility for generating dialog boxes in a script
$DIRSTACK directory stack
Disabled commands, in restricted shells
do keyword, begins execution of commands within a loop
done keyword, terminates a loop
DOS batch files, converting to shell scripts
DOS commands, UNIX equivalents of (table)
dot files, "hidden" setup and configuration files
Double brackets [[ ... ]] test construct
Appendix S. ASCII Table 824](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-830-320.jpg)
![Advanced Bash-Scripting Guide
• and evaluation of octal/hex constants
Double parentheses (( ... )) arithmetic expansion/evaluation construct
Double quotes " ... " weak quoting
• Double-quoting the backslash () character
Double-spacing a text file, using sed
***
-e File exists test
echo
• Feeding commands down a pipe
• Setting a variable using command substitution
• /bin/echo, external echo command
elif, Contraction of else and if
else
Encrypting files, using openssl
esac, keyword terminating case construct
Environmental variables
-eq , is-equal-to integer comparison test
Eratosthenes, Sieve of, algorithm for generating prime numbers
Escaped characters, special meanings of
/etc/fstab (filesystem mount) file
/etc/passwd (user account) file
$EUID, Effective user ID
eval, Combine and evaluate expression(s), with variable expansion
• Effects of, Example script
• Forces reevaluation of arguments
• And indirect references
• Risk of using
• Using eval to select among variables
Evaluation of octal/hex constants within [[ ... ]]
Appendix S. ASCII Table 825](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-831-320.jpg)
![Advanced Bash-Scripting Guide
$HOME, user's home directory
Homework assignment solver
$HOSTNAME, system host name
***
$Id parameter, in rcs (Revision Control System)
if [ condition ]; then ... test construct
• if-grep, if and grep in combination
Fixup for if-grep test
$IFS, Internal field separator variable
• Defaults to whitespace
Integer comparison operators
in, keyword preceding [list] in a for loop
Initialization table, /etc/inittab
Inline group, i.e., code block
Interactive script, test for
I/O redirection
Indirect referencing of variables
• New notation, introduced in version 2 of Bash ( example script)
Iteration
***
Job IDs, table
jot, Emit a sequence of integers. Equivalent to seq.
• Random sequence generation
***
Keywords
kill, terminate a process by process ID
Appendix S. ASCII Table 830](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-836-320.jpg)
![Advanced Bash-Scripting Guide
• for loops
for arg in [list]; do
Command substitution to generate [list]
Filename expansion in [list]
Multiple parameters in each [list] element
Omitting [list], defaults to positional parameters
Parameterizing [list]
Redirection
• in, (keyword) preceding [list] in a for loop
• Nested loops
• Running a loop in the background, script example
• Semicolon required, when do is on first line of loop
for loop
while loop
• until loop
until [ condition-is-true ]; do
• while loop
while [ condition ]; do
Function call inside test brackets
Multiple conditions
Omitting test brackets
Redirection
while read construct
• Which type of loop to use
Loopback devices
• In /dev directory
• Mounting an ISO image
-lt , less-than integer comparison test
***
m4, macro processing language
Appendix S. ASCII Table 832](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-838-320.jpg)
![Advanced Bash-Scripting Guide
• stdinof a function
• stdout to a file
> ... >>
• stdout to file descriptor j
>&j
• file descriptori to file descriptor j
i>&j
• stdout of a command to stderr
>&2
• stdout and stderr of a command to a file
&>
• tee, redirect to a file output of command(s) partway through a pipe
Reference Cards
• Miscellaneous constructs
• Parameter substitution/expansion
• Special shell variables
• String operations
• Test operators
Binary comparison
Files
Regular Expressions
• ^ (caret) Beginning-of-line
• $ (dollar sign) Anchor
• . (dot) Match single character
• * (asterisk) Any number of characters
• [ ] (brackets) Enclose character set to match
• (backslash) Escape, interpret following character literally
• < ... > (angle brackets, escaped) Word boundary
• Extended REs
+ Character match
{ } Escaped "curly" brackets
[: :] POSIX character classes
$REPLY, Default value associated with read command
Restricted shell, shell (or script) with certain commands disabled
Appendix S. ASCII Table 839](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-845-320.jpg)
![Advanced Bash-Scripting Guide
• options
***
$UID, User ID number
unalias, to remove an alias
uname, output system information
Uninitialized variables
uniq, filter to remove duplicate lines from a sorted file
unset, delete a shell variable
until loop
until [ condition-is-true ]; do
***
Variables
• Array operations on
• Assignment
Script example
Script example
Script example
• Bash internal variables
• Block of sed or awk code, setting a variable to
• C-style increment/decrement/trinary operations
• Change value of internal script variables using set
• declare, to modify the properties of variables
• Deleting a shell variable using unset
• Environmental
• Expansion / Substring replacement operators
• Indirect referencing
eval variable1=$$variable2
Newer notation
${!variable}
• Integer
• Integer / string (variables are untyped)
• Length
Appendix S. ASCII Table 846](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-852-320.jpg)
![Advanced Bash-Scripting Guide
${#var}
• Lvalue
• Manipulating and expanding
• Name and value of a variable, distinguishing between
• Null string, testing for
• Null variable assignment, avoiding
• Quoting
within test brackets
to preserve whitespace
• rvalue
• Setting to null value
• In subshell not visible to parent shell
• Testing a variable if it contains only digits
• Typing, restricting the properties of a variable
• Undeclared, error message
• Uninitialized
• Unquoted variable, splitting
• Unsetting
• Untyped
***
wait, suspend script execution
• To remedy script hang
Weak quoting " ... "
while loop
while [ condition ]; do
• C-style syntax
• Calling a function within test brackets
• Multiple conditions
• Omitting test brackets
• while read construct
Avoiding a subshell
Whitespace, spaces, tabs, and newline characters
• $IFS defaults to
• Inappropriate use of
• Preceding closing limit string in a here document, error
• Preceding script comments
• Quoting, to preserve whitespace within strings or variables
• [:space:], POSIX character class
Appendix S. ASCII Table 847](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-853-320.jpg)
![Advanced Bash-Scripting Guide
who, information about logged on users
•w
• whoami
• logname
Widgets
Wild card characters
• Asterisk *
• In [list] constructs
• Question mark ?
• Will not match dot files
Word splitting
• Definition
• Resulting from command substitution
Wrapper, shell
***
xargs, Filter for grouping arguments
• Curly brackets
• Limiting arguments passed
• Options
• Processes arguments one at a time
• Whitespace, handling
***
yes
• Emulation
***
-z String is null
Zombie, a process that has terminated, but not yet been killed by its parent
Notes
[1] These are referred to as builtins, features internal to the shell.
[2] Although recursion is possible in a shell script, it tends to be slow and its implementation is often an
ugly kludge.
[3] Many of the features of ksh88, and even a few from the updated ksh93 have been merged into Bash.
Appendix S. ASCII Table 848](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-854-320.jpg)
![Advanced Bash-Scripting Guide
[4] By convention, user-written shell scripts that are Bourne shell compliant generally take a name with a
.sh extension. System scripts, such as those found in /etc/rc.d, do not conform to this
nomenclature.
[5] Also seen in the literature as she-bang or sh-bang. This derives from the concatenation of the tokens
sharp (#) and bang (!).
[6] Some flavors of UNIX (those based on 4.2 BSD) allegedly take a four-byte magic number, requiring a
blank after the ! -- #! /bin/sh. According to Sven Mascheck this is probably a myth.
[7] The #! line in a shell script will be the first thing the command interpreter (sh or bash) sees. Since this
line begins with a #, it will be correctly interpreted as a comment when the command interpreter finally
executes the script. The line has already served its purpose - calling the command interpreter.
If, in fact, the script includes an extra #! line, then bash will interpret it as a comment.
#!/bin/bash
echo "Part 1 of script."
a=1
#!/bin/bash
# This does *not* launch a new script.
echo "Part 2 of script."
echo $a # Value of $a stays at 1.
[8] This allows some cute tricks.
#!/bin/rm
# Self-deleting script.
# Nothing much seems to happen when you run this... except that the file disappears.
WHATEVER=85
echo "This line will never print (betcha!)."
exit $WHATEVER # Doesn't matter. The script will not exit here.
# Try an echo $? after script termination.
# You'll get a 0, not a 85.
Also, try starting a README file with a #!/bin/more, and making it executable. The result is a
self-listing documentation file. (A here document using cat is possibly a better alternative -- see
Example 18-3).
[9] Portable Operating System Interface, an attempt to standardize UNIX-like OSes. The POSIX
specifications are listed on the Open Group site.
[10] To avoid this possibility, a script may begin with a #!/bin/env bash sha-bang line. This may be useful
on UNIX machines where bash is not located in /bin
[11] If Bash is your default shell, then the #! isn't necessary at the beginning of a script. However, if
launching a script from a different shell, such as tcsh, then you will need the #!.
[12] Caution: invoking a Bash script by sh scriptname turns off Bash-specific extensions, and the
script may therefore fail to execute.
[13] A script needs read, as well as execute permission for it to run, since the shell needs to be able to read
it.
[14] Why not simply invoke the script with scriptname? If the directory you are in ($PWD) is where
scriptname is located, why doesn't this work? This fails because, for security reasons, the current
Appendix S. ASCII Table 849](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-855-320.jpg)
![Advanced Bash-Scripting Guide
directory (./) is not by default included in a user's $PATH. It is therefore necessary to explicitly
invoke the script in the current directory with a ./scriptname.
[15] An operator is an agent that carries out an operation. Some examples are the common arithmetic
operators, + - * /. In Bash, there is some overlap between the concepts of operator and keyword.
[16]
A PID, or process ID, is a number assigned to a running process. The PIDs of running processes may
be viewed with a ps command.
Definition: A process is a currently executing command (or program), sometimes referred to as a
job.
[17] The shell does the brace expansion. The command itself acts upon the result of the expansion.
[18] Exception: a code block in braces as part of a pipe may run as a subshell.
ls | { read firstline; read secondline; }
# Error. The code block in braces runs as a subshell,
#+ so the output of "ls" cannot be passed to variables within the block.
echo "First line is $firstline; second line is $secondline" # Won't work.
# Thanks, S.C.
[19] Even as in olden times a philtre denoted a potion alleged to have magical transformative powers, so
does a UNIX filter transform its target in (roughly) analogous fashion. (The coder who comes up with a
"love philtre" that runs on a Linux machine will likely win accolades and honors.)
[20] Bash stores a list of commands previously issued from the command-line in a buffer, or memory space,
for recall with the builtin history commands.
[21] A linefeed (newline) is also a whitespace character. This explains why a blank line, consisting only of a
linefeed, is considered whitespace.
[22] Technically, the name of a variable is called an lvalue, meaning that it appears on the left side of an
assignment statment, as in VARIABLE=23. A variable's value is an rvalue, meaning that it appears on
the right side of an assignment statement, as in VAR2=$VARIABLE.
A variable's name is, in fact, a reference, a pointer to the memory location(s) where the actual data
associated with that variable is kept.
[23] Note that functions also take positional parameters.
[24] The process calling the script sets the $0 parameter. By convention, this parameter is the name of the
script. See the manpage (manual page) for execv.
From the command-line, however, $0 is the name of the shell.
bash$ echo $0
bash
tcsh% echo $0
tcsh
[25] Unless there is a file named first in the current working directory. Yet another reason to quote.
(Thank you, Harald Koenig, for pointing this out.
[26]
Encapsulating "!" within double quotes gives an error when used from the command line. This is
interpreted as a history command. Within a script, though, this problem does not occur, since the Bash
Appendix S. ASCII Table 850](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-856-320.jpg)
![Advanced Bash-Scripting Guide
history mechanism is disabled then.
Of more concern is the apparently inconsistent behavior of within double quotes, and especially
following an echo -e command.
bash$ echo hello!
hello!
bash$ echo "hello!"
hello!
bash$ echo
>
bash$ echo ""
>
bash$ echo a
a
bash$ echo "a"
a
bash$ echo xty
xty
bash$ echo "xty"
xty
bash$ echo -e xty
xty
bash$ echo -e "xty"
x y
Double quotes following an echo sometimes escape . Moreover, the -e option to echo causes the "t"
to be interpreted as a tab.
(Thank you, Wayne Pollock, for pointing this out, and Geoff Lee and Daniel Barclay for explaining it.)
[27] "Word splitting," in this context, means dividing a character string into separate and discrete
arguments.
[28] In those instances when there is no return terminating the function.
[29] A token is a symbol or short string with a special meaning attached to it (a meta-meaning). In Bash,
certain tokens, such as [ and . (dot-command), may expand to keywords and commands.
[30] Per the 1913 edition of Webster's Dictionary:
Deprecate
...
To pray against, as an evil;
to seek to avert by prayer;
to desire the removal of;
to seek deliverance from;
to express deep regret for;
to disapprove of strongly.
[31] Be aware that suid binaries may open security holes. The suid flag has no effect on shell scripts.
[32] On modern UNIX systems, the sticky bit is no longer used for files, only on directories.
[33] As S.C. points out, in a compound test, even quoting the string variable might not suffice. [ -n
"$string" -o "$a" = "$b" ] may cause an error with some versions of Bash if $string is
Appendix S. ASCII Table 851](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-857-320.jpg)
![Advanced Bash-Scripting Guide
empty. The safe way is to append an extra character to possibly empty variables, [ "x$string" !=
x -o "x$a" = "x$b" ] (the "x's" cancel out).
[34] Side effects are, of course, unintended -- and usually undesirable -- consequences.
[35] A stack register is a set of consecutive memory locations, such that the values stored (pushed) are
retrieved (popped) in reverse order. The last value stored is the first retrieved. This is sometimes called
a LIFO (last-in-first-out) or pushdown stack.
[36] The PID of the currently running script is $$, of course.
[37] Somewhat analogous to recursion, in this context nesting refers to a pattern embedded within a larger
pattern. One of the definitions of nest, according to the 1913 edition of Webster's Dictionary, illustrates
this beautifully: "A collection of boxes, cases, or the like, of graduated size, each put within the one
next larger."
[38] The words "argument" and "parameter" are often used interchangeably. In the context of this document,
they have the same precise meaning: a variable passed to a script or function.
[39] Within a script, inside a subshell, $$ returns the PID of the script, not the subshell.
[40] This applies to either command-line arguments or parameters passed to a function.
[41] Note that $substring and $replacement may refer to either literal strings or variables,
depending on context. See the first usage example.
[42] If $parameter is null in a non-interactive script, it will terminate with a 127 exit status (the Bash error
code for "command not found").
[43] In this context, typing a variable means to classify it and restrict its properties. For example, a variable
declared or typed as an integer is no longer available for string operations.
declare -i intvar
intvar=23
echo "$intvar" # 23
intvar=stringval
echo "$intvar" # 0
[44] True "randomness," insofar as it exists at all, can only be found in certain incompletely understood
natural phenomena, such as radioactive decay. Computers only simulate randomness, and
computer-generated sequences of "random" numbers are therefore referred to as pseudorandom.
[45] The seed of a computer-generated pseudorandom number series can be considered an identification
label. For example, think of the pseudorandom series with a seed of 23 as Series #23.
A property of a pseurandom number series is the length of the cycle before it starts repeating itself. A
good pseurandom generator will produce series with very long cycles.
[46] Iteration: Repeated execution of a command or group of commands, usually -- but not always, while a
given condition holds, or until a given condition is met.
[47] These are shell builtins, whereas other loop commands, such as while and case, are keywords.
[48] For purposes of command substitution, a command may be an external system command, an internal
scripting builtin, or even a script function.
[49] In a more technically correct sense, command substitution extracts the stdout of a command, then
assigns it to a variable using the = operator.
[50] In fact, nesting with backticks is also possible, but only by escaping the inner backticks, as John
Default points out.
word_count=` wc -w `echo * | awk '{print $8}'` `
Appendix S. ASCII Table 852](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-858-320.jpg)
![Advanced Bash-Scripting Guide
[51] As Nathan Coulter points out, "while forking a process is a low-cost operation, executing a new
program in the newly-forked child process adds more overhead."
[52] An exception to this is the time command, listed in the official Bash documentation as a keyword
("reserved word").
[53] Note that let cannot be used for setting string variables.
[54] To Export information is to make it available in a more general context. See also scope.
[55] An option is an argument that acts as a flag, switching script behaviors on or off. The argument
associated with a particular option indicates the behavior that the option (flag) switches on or off.
[56] Technically, an exit only terminates the process (or shell) in which it is running, not the parent process.
[57] Unless the exec is used to reassign file descriptors.
[58]
Hashing is a method of creating lookup keys for data stored in a table. The data items themselves are
"scrambled" to create keys, using one of a number of simple mathematical algorithms (methods, or
recipes).
An advantage of hashing is that it is fast. A disadvantage is that collisions -- where a single key maps to
more than one data item -- are possible.
For examples of hashing see Example A-20 and Example A-21.
[59] The readline library is what Bash uses for reading input in an interactive shell.
[60] The C source for a number of loadable builtins is typically found in the
/usr/share/doc/bash-?.??/functions directory.
Note that the -f option to enable is not portable to all systems.
[61] The same effect as autoload can be achieved with typeset -fu.
[62]
Dotfiles are files whose names begin with a dot, such as ~/.Xdefaults. Such filenames do not
appear in a normal ls listing (although an ls -a will show them), and they cannot be deleted by an
accidental rm -rf *. Dotfiles are generally used as setup and configuration files in a user's home
directory.
[63] This particular feature may not yet be implemented in the version of the ext2/ext3 filesystem installed
on your system. Check the documentation for your Linux distro.
[64] And even when xargs is not strictly necessary, it can speed up execution of a command involving
batch-processing of multiple files.
[65] This is only true of the GNU version of tr, not the generic version often found on commercial UNIX
systems.
[66] An archive, in the sense discussed here, is simply a set of related files stored in a single location.
[67] A tar czvf ArchiveName.tar.gz * will include dotfiles in subdirectories below the current
working directory. This is an undocumented GNU tar "feature."
[68] The checksum may be expressed as a hexadecimal number, or to some other base.
[69] For even better security, use the sha256sum, sha512, and sha1pass commands.
[70] This is a symmetric block cipher, used to encrypt files on a single system or local network, as opposed
to the public key cipher class, of which pgp is a well-known example.
[71] Creates a temporary directory when invoked with the -d option.
[72]
Appendix S. ASCII Table 853](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-859-320.jpg)
![Advanced Bash-Scripting Guide
A daemon is a background process not attached to a terminal session. Daemons perform designated
services either at specified times or explicitly triggered by certain events.
The word "daemon" means ghost in Greek, and there is certainly something mysterious, almost
supernatural, about the way UNIX daemons wander about behind the scenes, silently carrying out their
appointed tasks.
[73] This is actually a script adapted from the Debian Linux distribution.
[74] The print queue is the group of jobs "waiting in line" to be printed.
[75] For an excellent overview of this topic, see Andy Vaught's article, Introduction to Named Pipes, in the
September, 1997 issue of Linux Journal.
[76] EBCDIC (pronounced "ebb-sid-ick") is an acronym for Extended Binary Coded Decimal Interchange
Code. This is an IBM data format no longer in much use. A bizarre application of the conv=ebcdic
option of dd is as a quick 'n easy, but not very secure text file encoder.
cat $file | dd conv=swab,ebcdic > $file_encrypted
# Encode (looks like gibberish).
# Might as well switch bytes (swab), too, for a little extra obscurity.
cat $file_encrypted | dd conv=swab,ascii > $file_plaintext
# Decode.
[77] A macro is a symbolic constant that expands into a command string or a set of operations on
parameters. Simply put, it's a shortcut or abbreviation.
[78] This is the case on a Linux machine or a UNIX system with disk quotas.
[79] The userdel command will fail if the particular user being deleted is still logged on.
[80] For more detail on burning CDRs, see Alex Withers' article, Creating CDs, in the October, 1999 issue
of Linux Journal.
[81] The -c option to mke2fs also invokes a check for bad blocks.
[82] Since only root has write permission in the /var/lock directory, a user script cannot set a lock file
there.
[83] Operators of single-user Linux systems generally prefer something simpler for backups, such as tar.
[84] As of the version 4 update of Bash, the -f and -c options take a block size of 512 when in POSIX
mode. Additionally, there are two new options: -b for socket buffer size, and -T for the limit on the
number of threads.
[85] NAND is the logical not-and operator. Its effect is somewhat similar to subtraction.
[86] In Bash and other Bourne shell derivatives, it is possible to set variables in a single command's
environment.
var1=value1 var2=value2 commandXXX
# $var1 and $var2 set in the environment of 'commandXXX' only.
[87] The killall system script should not be confused with the killall command in /usr/bin.
[88] A meta-meaning is the meaning of a term or expression on a higher level of abstraction. For example,
the literal meaning of regular expression is an ordinary expression that conforms to accepted usage.
The meta-meaning is drastically different, as discussed at length in this chapter.
[89] Since sed, awk, and grep process single lines, there will usually not be a newline to match. In those
cases where there is a newline in a multiple line expression, the dot will match the newline.
#!/bin/bash
Appendix S. ASCII Table 854](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-860-320.jpg)
![Advanced Bash-Scripting Guide
sed -e 'N;s/.*/[&]/' << EOF # Here Document
line1
line2
EOF
# OUTPUT:
# [line1
# line2]
echo
awk '{ $0=$1 "n" $2; if (/line.1/) {print}}' << EOF
line 1
line 2
EOF
# OUTPUT:
# line
# 1
# Thanks, S.C.
exit 0
[90] Filename expansion means expanding filename patterns or templates containing special characters. For
example, example.??? might expand to example.001 and/or example.txt.
[91] A wild card character, analogous to a wild card in poker, can represent (almost) any other character.
[92] Filename expansion can match dotfiles, but only if the pattern explicitly includes the dot as a literal
character.
~/[.]bashrc # Will not expand to ~/.bashrc
~/?bashrc # Neither will this.
# Wild cards and metacharacters will NOT
#+ expand to a dot in globbing.
~/.[b]ashrc # Will expand to ~/.bashrc
~/.ba?hrc # Likewise.
~/.bashr* # Likewise.
# Setting the "dotglob" option turns this off.
# Thanks, S.C.
[93] By convention in UNIX and Linux, data streams and peripherals (device files) are treated as files, in a
fashion analogous to ordinary files.
[94] A file descriptor is simply a number that the operating system assigns to an open file to keep track of it.
Consider it a simplified type of file pointer. It is analogous to a file handle in C.
[95] Using file descriptor 5 might cause problems. When Bash creates a child process, as with
exec, the child inherits fd 5 (see Chet Ramey's archived e-mail, SUBJECT: RE: File descriptor 5 is
held open). Best leave this particular fd alone.
[96] An external command invoked with an exec does not (usually) fork off a subprocess / subshell.
[97] This has the same effect as a named pipe (temp file), and, in fact, named pipes were at one time used in
process substitution.
[98] The return command is a Bash builtin.
[99] Otherwise known as redundancy.
Appendix S. ASCII Table 855](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-861-320.jpg)
![Advanced Bash-Scripting Guide
[100] Otherwise known as tautology.
[101] Otherwise known as a metaphor.
[102] Otherwise known as a recursive function.
[103] Too many levels of recursion may crash a script with a segfault.
#!/bin/bash
# Warning: Running this script could possibly lock up your system!
# If you're lucky, it will segfault before using up all available memory.
recursive_function ()
{
echo "$1" # Makes the function do something, and hastens the segfault.
(( $1 < $2 )) && recursive_function $(( $1 + 1 )) $2;
# As long as 1st parameter is less than 2nd,
#+ increment 1st and recurse.
}
recursive_function 1 50000 # Recurse 50,000 levels!
# Most likely segfaults (depending on stack size, set by ulimit -m).
# Recursion this deep might cause even a C program to segfault,
#+ by using up all the memory allotted to the stack.
echo "This will probably not print."
exit 0 # This script will not exit normally.
# Thanks, Stéphane Chazelas.
[104] ... as the first word of a command string. Obviously, an alias is only meaningful at the beginning of a
command.
[105] However, aliases do seem to expand positional parameters.
[106] The entries in /dev provide mount points for physical and virtual devices. These entries use very little
drive space.
Some devices, such as /dev/null, /dev/zero, and /dev/urandom are virtual. They are not
actual physical devices and exist only in software.
[107] A block device reads and/or writes data in chunks, or blocks, in contrast to a character device, which
acesses data in character units. Examples of block devices are hard drives, CDROM drives, and flash
drives. Examples of character devices are keyboards, modems, sound cards.
[108] Of course, the mount point /mnt/flashdrive must exist. If not, then, as root, mkdir
/mnt/flashdrive.
To actually mount the drive, use the following command: mount /mnt/flashdrive
Newer Linux distros automount flash drives in the /media directory without user intervention.
[109] Certain system commands, such as procinfo, free, vmstat, lsdev, and uptime do this as well.
[110] By convention, signal 0 is assigned to exit.
[111] Setting the suid permission on the script itself has no effect in Linux and most other UNIX flavors.
[112] In this context, "magic numbers" have an entirely different meaning than the magic numbers used to
designate file types.
[113] Precedence, in this context, has approximately the same meaning as priority
Appendix S. ASCII Table 856](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-862-320.jpg)
![Advanced Bash-Scripting Guide
[114] Quite a number of Linux utilities are, in fact, shell wrappers. Some examples are
/usr/bin/pdf2ps, /usr/bin/batch, and /usr/bin/xmkmf.
[115] ANSI is, of course, the acronym for the American National Standards Institute. This august body
establishes and maintains various technical and industrial standards.
[116] This usually means liberal use of functions.
[117] See Marius van Oers' article, Unix Shell Scripting Malware, and also the Denning reference in the
bibliography.
[118] Or, better yet, #!/bin/env sh.
[119] Copyright 1995-2009 by Chester Ramey.
[120] This only works with pipes and certain other special files.
[121] But only in conjunction with readline, i.e., from the command-line.
[122] And while you're at it, consider fixing the notorious piped read problem.
[123] This is the notorious flog it to death technique.
[124] In fact, he is a school dropout and has no formal credentials or qualifications whatsoever. Aside from
the ABS Guide, his main claim to fame is a First Place in the sack race at the Colfax Elementary School
Field Day in June, 1958.
[125] Those who can, do. Those who can't . . . get an MCSE.
[126] Sometimes it seems as if he has spent his entire life flouting conventional wisdom and defying the
sonorous Voice of Authority: "Hey, you can't do that!"
[127] E-mails from certain spam-infested TLDs (61, 202, 211, 218, 220, etc.) will be trapped by spam filters
and deleted unread. If your ISP is located on one of these, please use a Webmail account to contact the
author.
[128] Well, if you absolutely insist, you can try modifying Example A-44 to suit your purposes.
[129] It was hard to resist the obvious pun. No slight intended, since the book is a pretty decent introduction
to the basic concepts of shell scripting.
[130] Sed executes without user intervention.
[131] If no address range is specified, the default is all lines.
[132] Its name derives from the initials of its authors, Aho, Weinberg, and Kernighan.
[133] Out of range exit values can result in unexpected exit codes. An exit value greater than 255 returns an
exit code modulo 256. For example, exit 3809 gives an exit code of 225 (3809 % 256 = 225).
[134] An update of /usr/include/sysexits.h allocates previously unused exit codes from 64 - 78. It
may be anticipated that the range of unallotted exit codes will be further restricted in the future. The
author of this document will not do fixups on the scripting examples to conform to the changing
standard. This should not cause any problems, since there is no overlap or conflict in usage of exit
codes between compiled C/C++ binaries and shell scripts.
[135] This does not apply to csh, tcsh, and other shells not related to or descended from the classic Bourne
shell (sh).
[136] In older versions of UNIX, passwords were stored in /etc/passwd, and that explains the name of
the file.
[137] Some early UNIX systems had a fast, small-capacity fixed disk (containing /, the root partition), and a
second drive which was larger, but slower (containing /usr and other partitions). The most frequently
used programs and utilities therefore resided on the small-but-fast drive, in /bin, and the others on the
slower drive, in /usr/bin.
This likewise accounts for the split between /sbin and /usr/sbin, /lib and /usr/lib, etc.
Appendix S. ASCII Table 857](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-863-320.jpg)
![Advanced Bash-Scripting Guide
[138] This works only from the command line, of course, and not within a script.
[139] Normally the default parameter completion files reside in either the /etc/profile.d directory or
in /etc/bash_completion. These autoload on system startup. So, after writing a useful
completion script, you might wish to move it (as root, of course) to one of these directories.
[140] It has been extensively documented that programmers are willing to put in long hours of effort in order
to save ten minutes of "unnecessary" labor. This is known as optimization.
[141] Various readers have suggested modifications of the above batch file to prettify it and make it more
compact and efficient. In the opinion of the ABS Guide author, this is wasted effort. A Bash script can
access a DOS filesystem, or even an NTFS partition (with the help of ntfs-3g) to do batch or scripted
operations.
[142] For all you fine people who failed second-year algebra, a determinant is a numerical quantity
associated with a multidimensional matrix (array of numbers).
For the simple case of a 2 x 2 determinant:
|a b|
|b a|
The solution is a*a - b*b, where "a" and "b" represent numbers.
[143] A printed edition of a substantively rewritten version of the book will be released in fall of 2010.
[144] The author intends that this book be released into the Public Domain after a period of 14 years from
initial publication, that is, in 2014. In the early years of the American republic this was the duration
statutorily granted to a copyrighted work.
Appendix S. ASCII Table 858](https://image.slidesharecdn.com/abs-guide-100617013754-phpapp02/85/Abs-guide-864-320.jpg)
Abs guide
- 1. Advanced Bash-Scripting Guide An in-depth exploration of the art of shell scripting Mendel Cooper <thegrendel.abs@gmail.com> 6.1 30 September 2009 Revision History Revision 5.6 26 Jan 2009 Revised by: mc 'WORCESTERBERRY' release: Minor Update. Revision 6.0 23 Mar 2009 Revised by: mc 'THIMBLEBERRY' release: Major Update. Revision 6.1 30 Sep 2009 Revised by: mc 'BUFFALOBERRY' release: Minor Update. This tutorial assumes no previous knowledge of scripting or programming, but progresses rapidly toward an intermediate/advanced level of instruction . . . all the while sneaking in little nuggets of UNIX® wisdom and lore. It serves as a textbook, a manual for self-study, and a reference and source of knowledge on shell scripting techniques. The exercises and heavily-commented examples invite active reader participation, under the premise that the only way to really learn scripting is to write scripts. This book is suitable for classroom use as a general introduction to programming concepts. Dedication For Anita, the source of all the magic
- 2. Advanced Bash-Scripting Guide Table of Contents Chapter 1. Shell Programming! .........................................................................................................................1 Chapter 2. Starting Off With a Sha-Bang........................................................................................................3 2.1. Invoking the script............................................................................................................................6 2.2. Preliminary Exercises.......................................................................................................................6 Part 2. Basics.......................................................................................................................................................7 Chapter 3. Special Characters...........................................................................................................................8 Chapter 4. Introduction to Variables and Parameters ..................................................................................29 4.1. Variable Substitution......................................................................................................................29 4.2. Variable Assignment......................................................................................................................32 . 4.3. Bash Variables Are Untyped..........................................................................................................33 4.4. Special Variable Types...................................................................................................................34 Chapter 5. Quoting...........................................................................................................................................40 5.1. Quoting Variables...........................................................................................................................40 5.2. Escaping..........................................................................................................................................42 Chapter 6. Exit and Exit Status.......................................................................................................................48 Chapter 7. Tests................................................................................................................................................51 7.1. Test Constructs...............................................................................................................................51 7.2. File test operators............................................................................................................................58 7.3. Other Comparison Operators..........................................................................................................61 7.4. Nested if/then Condition Tests.......................................................................................................67 7.5. Testing Your Knowledge of Tests..................................................................................................67 Chapter 8. Operations and Related Topics....................................................................................................69 8.1. Operators.........................................................................................................................................69 8.2. Numerical Constants.......................................................................................................................75 Part 3. Beyond the Basics.................................................................................................................................77 Chapter 9. Variables Revisited........................................................................................................................78 9.1. Internal Variables............................................................................................................................78 9.2. Manipulating Strings .......................................................................................................................96 9.2.1. Manipulating strings using awk..........................................................................................104 9.2.2. Further Reference................................................................................................................104 9.3. Parameter Substitution..................................................................................................................105 9.4. Typing variables: declare or typeset.............................................................................................114 9.4.1. Another use for declare.......................................................................................................116 9.5. Indirect References.......................................................................................................................116 9.6. $RANDOM: generate random integer..........................................................................................120 9.7. The Double-Parentheses Construct...............................................................................................131 i
- 3. Advanced Bash-Scripting Guide Table of Contents Chapter 10. Loops and Branches..................................................................................................................134 10.1. Loops..........................................................................................................................................134 10.2. Nested Loops..............................................................................................................................147 10.3. Loop Control...............................................................................................................................148 10.4. Testing and Branching................................................................................................................151 Chapter 11. Command Substitution.............................................................................................................160 Chapter 12. Arithmetic Expansion................................................................................................................166 Chapter 13. Recess Time................................................................................................................................167 Part 4. Commands..........................................................................................................................................168 Chapter 14. Internal Commands and Builtins.............................................................................................176 14.1. Job Control Commands..............................................................................................................205 Chapter 15. External Filters, Programs and Commands...........................................................................210 15.1. Basic Commands........................................................................................................................210 15.2. Complex Commands ...................................................................................................................215 15.3. Time / Date Commands..............................................................................................................225 15.4. Text Processing Commands ........................................................................................................229 15.5. File and Archiving Commands...................................................................................................251 15.6. Communications Commands......................................................................................................270 15.7. Terminal Control Commands.....................................................................................................284 15.8. Math Commands.........................................................................................................................285 15.9. Miscellaneous Commands..........................................................................................................296 Chapter 16. System and Administrative Commands..................................................................................310 16.1. Analyzing a System Script..........................................................................................................339 Part 5. Advanced Topics .................................................................................................................................341 Chapter 17. Regular Expressions..................................................................................................................343 17.1. A Brief Introduction to Regular Expressions ..............................................................................343 17.2. Globbing.....................................................................................................................................347 Chapter 18. Here Documents.........................................................................................................................349 18.1. Here Strings................................................................................................................................359 Chapter 19. I/O Redirection ...........................................................................................................................363 19.1. Using exec...................................................................................................................................366 19.2. Redirecting Code Blocks............................................................................................................369 19.3. Applications................................................................................................................................374 Chapter 20. Subshells.....................................................................................................................................376 ii
- 4. Advanced Bash-Scripting Guide Table of Contents Chapter 21. Restricted Shells.........................................................................................................................381 Chapter 22. Process Substitution...................................................................................................................383 Chapter 23. Functions....................................................................................................................................387 23.1. Complex Functions and Function Complexities.........................................................................391 23.2. Local Variables...........................................................................................................................401 23.2.1. Local variables and recursion............................................................................................402 23.3. Recursion Without Local Variables............................................................................................404 Chapter 24. Aliases.........................................................................................................................................408 Chapter 25. List Constructs...........................................................................................................................411 Chapter 26. Arrays.........................................................................................................................................414 Chapter 27. /dev and /proc.............................................................................................................................443 27.1. /dev..............................................................................................................................................443 27.2. /proc............................................................................................................................................445 Chapter 28. Of Zeros and Nulls.....................................................................................................................452 Chapter 29. Debugging...................................................................................................................................456 Chapter 30. Options........................................................................................................................................466 Chapter 31. Gotchas.......................................................................................................................................469 Chapter 32. Scripting With Style..................................................................................................................478 32.1. Unofficial Shell Scripting Stylesheet..........................................................................................478 Chapter 33. Miscellany...................................................................................................................................481 33.1. Interactive and non-interactive shells and scripts.......................................................................481 33.2. Operator Precedence...................................................................................................................482 33.3. Shell Wrappers............................................................................................................................484 33.4. Tests and Comparisons: Alternatives ..........................................................................................489 33.5. A script calling itself (recursion)................................................................................................490 33.6. "Colorizing" Scripts....................................................................................................................492 33.7. Optimizations..............................................................................................................................505 33.8. Assorted Tips..............................................................................................................................506 33.8.1. Ideas for more powerful scripts.........................................................................................506 33.8.2. Widgets ..............................................................................................................................517 33.9. Security Issues............................................................................................................................518 33.9.1. Infected Shell Scripts .........................................................................................................518 33.9.2. Hiding Shell Script Source................................................................................................519 33.9.3. Writing Secure Shell Scripts.............................................................................................519 33.10. Portability Issues.......................................................................................................................519 33.10.1. A Test Suite.....................................................................................................................520 iii
- 5. Advanced Bash-Scripting Guide Table of Contents Chapter 33. Miscellany 33.11. Shell Scripting Under Windows...............................................................................................521 Chapter 34. Bash, versions 2, 3, and 4..........................................................................................................522 34.1. Bash, version 2............................................................................................................................522 34.2. Bash, version 3............................................................................................................................526 34.2.1. Bash, version 3.1...............................................................................................................529 34.2.2. Bash, version 3.2...............................................................................................................529 34.3. Bash, version 4............................................................................................................................530 Chapter 35. Endnotes.....................................................................................................................................537 35.1. Author's Note..............................................................................................................................537 35.2. About the Author........................................................................................................................537 35.3. Where to Go For Help .................................................................................................................537 35.4. Tools Used to Produce This Book..............................................................................................538 35.4.1. Hardware...........................................................................................................................538 35.4.2. Software and Printware.....................................................................................................538 35.5. Credits.........................................................................................................................................538 35.6. Disclaimer...................................................................................................................................540 Bibliography....................................................................................................................................................541 Appendix A. Contributed Scripts..................................................................................................................549 Appendix B. Reference Cards........................................................................................................................746 Appendix C. A Sed and Awk Micro-Primer................................................................................................751 C.1. Sed................................................................................................................................................751 C.2. Awk..............................................................................................................................................754 Appendix D. Exit Codes With Special Meanings.........................................................................................757 Appendix E. A Detailed Introduction to I/O and I/O Redirection.............................................................758 Appendix F. Command-Line Options...........................................................................................................760 F.1. Standard Command-Line Options................................................................................................760 F.2. Bash Command-Line Options......................................................................................................761 Appendix G. Important Files.........................................................................................................................763 Appendix H. Important System Directories.................................................................................................764 Appendix I. An Introduction to Programmable Completion.....................................................................766 Appendix J. Localization................................................................................................................................769 iv
- 6. Advanced Bash-Scripting Guide Table of Contents Appendix K. History Commands..................................................................................................................773 Appendix L. A Sample .bashrc File...............................................................................................................774 Appendix M. Converting DOS Batch Files to Shell Scripts........................................................................788 Appendix N. Exercises....................................................................................................................................792 N.1. Analyzing Scripts.........................................................................................................................792 N.2. Writing Scripts.............................................................................................................................794 Appendix O. Revision History.......................................................................................................................804 Appendix P. Download and Mirror Sites.....................................................................................................807 Appendix Q. To Do List ..................................................................................................................................808 Appendix R. Copyright..................................................................................................................................810 Appendix S. ASCII Table...............................................................................................................................812 Index....................................................................................................................................................813 Notes ..............................................................................................................................................848 v
- 7. Chapter 1. Shell Programming! No programming language is perfect. There is not even a single best language; there are only languages well suited or perhaps poorly suited for particular purposes. --Herbert Mayer A working knowledge of shell scripting is essential to anyone wishing to become reasonably proficient at system administration, even if they do not anticipate ever having to actually write a script. Consider that as a Linux machine boots up, it executes the shell scripts in /etc/rc.d to restore the system configuration and set up services. A detailed understanding of these startup scripts is important for analyzing the behavior of a system, and possibly modifying it. The craft of scripting is not hard to master, since the scripts can be built in bite-sized sections and there is only a fairly small set of shell-specific operators and options [1] to learn. The syntax is simple and straightforward, similar to that of invoking and chaining together utilities at the command line, and there are only a few "rules" governing their use. Most short scripts work right the first time, and debugging even the longer ones is straightforward. In the 1970s, the BASIC language enabled anyone reasonably computer to write programs on an early generation of microcomputers. Decades scripting language enables anyone with a rudimentary knowledge of L on much more powerful machines. A shell script is a quick-and-dirty method of prototyping a complex application. Getting even a limited subset of the functionality to work in a script is often a useful first stage in project development. This way, the structure of the application can be tested and played with, and the major pitfalls found before proceeding to the final coding in C, C++, Java, Perl, or Python. Shell scripting hearkens back to the classic UNIX philosophy of breaking complex projects into simpler subtasks, of chaining together components and utilities. Many consider this a better, or at least more esthetically pleasing approach to problem solving than using one of the new generation of high powered all-in-one languages, such as Perl, which attempt to be all things to all people, but at the cost of forcing you to alter your thinking processes to fit the tool. According to Herbert Mayer, "a useful language needs arrays, pointers, and a generic mechanism for building data structures." By these criteria, shell scripting falls somewhat short of being "useful." Or, perhaps not. . . . When not to use shell scripts • Resource-intensive tasks, especially where speed is a factor (sorting, hashing, recursion [2] ...) • Procedures involving heavy-duty math operations, especially floating point arithmetic, arbitrary precision calculations, or complex numbers (use C++ or FORTRAN instead) • Cross-platform portability required (use C or Java instead) Chapter 1. Shell Programming! 1
- 8. Advanced Bash-Scripting Guide • Complex applications, where structured programming is a necessity (type-checking of variables, function prototypes, etc.) • Mission-critical applications upon which you are betting the future of the company • Situations where security is important, where you need to guarantee the integrity of your system and protect against intrusion, cracking, and vandalism • Project consists of subcomponents with interlocking dependencies • Extensive file operations required (Bash is limited to serial file access, and that only in a particularly clumsy and inefficient line-by-line fashion.) • Need native support for multi-dimensional arrays • Need data structures, such as linked lists or trees • Need to generate / manipulate graphics or GUIs • Need direct access to system hardware • Need port or socket I/O • Need to use libraries or interface with legacy code • Proprietary, closed-source applications (Shell scripts put the source code right out in the open for all the world to see.) If any of the above applies, consider a more powerful scripting language -- perhaps Perl, Tcl, Python, Ruby -- or possibly a compiled language such as C, C++, or Java. Even then, prototyping the application as a shell script might still be a useful development step. We will be using Bash, an acronym for "Bourne-Again shell" and a pun on Stephen Bourne's now classic Bourne shell. Bash has become a de facto standard for shell scripting on most flavors of UNIX. Most of the principles this book covers apply equally well to scripting with other shells, such as the Korn Shell, from which Bash derives some of its features, [3] and the C Shell and its variants. (Note that C Shell programming is not recommended due to certain inherent problems, as pointed out in an October, 1993 Usenet post by Tom Christiansen.) What follows is a tutorial on shell scripting. It relies heavily on examples to illustrate various features of the shell. The example scripts work -- they've been tested, insofar as was possible -- and some of them are even useful in real life. The reader can play with the actual working code of the examples in the source archive (scriptname.sh or scriptname.bash), [4] give them execute permission (chmod u+rx scriptname), then run them to see what happens. Should the source archive not be available, then cut-and-paste from the HTML or pdf rendered versions. Be aware that some of the scripts presented here introduce features before they are explained, and this may require the reader to temporarily skip ahead for enlightenment. Unless otherwise noted, the author of this book wrote the example scripts that follow. His countenance was bold and bashed not. --Edmund Spenser Chapter 1. Shell Programming! 2
- 9. Chapter 2. Starting Off With a Sha-Bang Shell programming is a 1950s juke box . . . --Larry Wall In the simplest case, a script is nothing more than a list of system commands stored in a file. At the very least, this saves the effort of retyping that particular sequence of commands each time it is invoked. Example 2-1. cleanup: A script to clean up the log files in /var/log # Cleanup # Run as root, of course. cd /var/log cat /dev/null > messages cat /dev/null > wtmp echo "Logs cleaned up." There is nothing unusual here, only a set of commands that could just as easily have been invoked one by one from the command-line on the console or in a terminal window. The advantages of placing the commands in a script go far beyond not having to retype them time and again. The script becomes a program -- a tool -- and it can easily be modified or customized for a particular application. Example 2-2. cleanup: An improved clean-up script #!/bin/bash # Proper header for a Bash script. # Cleanup, version 2 # Run as root, of course. # Insert code here to print error message and exit if not root. LOG_DIR=/var/log # Variables are better than hard-coded values. cd $LOG_DIR cat /dev/null > messages cat /dev/null > wtmp echo "Logs cleaned up." exit # The right and proper method of "exiting" from a script. Now that's beginning to look like a real script. But we can go even farther . . . Example 2-3. cleanup: An enhanced and generalized version of above scripts. #!/bin/bash # Cleanup, version 3 # Warning: # ------- Chapter 2. Starting Off With a Sha-Bang 3
- 10. Advanced Bash-Scripting Guide # This script uses quite a number of features that will be explained #+ later on. # By the time you've finished the first half of the book, #+ there should be nothing mysterious about it. LOG_DIR=/var/log ROOT_UID=0 # Only users with $UID 0 have root privileges. LINES=50 # Default number of lines saved. E_XCD=86 # Can't change directory? E_NOTROOT=87 # Non-root exit error. # Run as root, of course. if [ "$UID" -ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi if [ -n "$1" ] # Test whether command-line argument is present (non-empty). then lines=$1 else lines=$LINES # Default, if not specified on command-line. fi # Stephane Chazelas suggests the following, #+ as a better way of checking command-line arguments, #+ but this is still a bit advanced for this stage of the tutorial. # # E_WRONGARGS=85 # Non-numerical argument (bad argument format). # # case "$1" in # "" ) lines=50;; # *[!0-9]*) echo "Usage: `basename $0` file-to-cleanup"; exit $E_WRONGARGS;; # * ) lines=$1;; # esac # #* Skip ahead to "Loops" chapter to decipher all this. cd $LOG_DIR if [ `pwd` != "$LOG_DIR" ] # or if [ "$PWD" != "$LOG_DIR" ] # Not in /var/log? then echo "Can't change to $LOG_DIR." exit $E_XCD fi # Doublecheck if in right directory before messing with log file. # Far more efficient is: # # cd /var/log || { # echo "Cannot change to necessary directory." >&2 # exit $E_XCD; # } Chapter 2. Starting Off With a Sha-Bang 4
- 11. Advanced Bash-Scripting Guide tail -n $lines messages > mesg.temp # Save last section of message log file. mv mesg.temp messages # Becomes new log directory. # cat /dev/null > messages #* No longer needed, as the above method is safer. cat /dev/null > wtmp # ': > wtmp' and '> wtmp' have the same effect. echo "Logs cleaned up." exit 0 # A zero return value from the script upon exit indicates success #+ to the shell. Since you may not wish to wipe out the entire system log, this version of the script keeps the last section of the message log intact. You will constantly discover ways of fine-tuning previously written scripts for increased effectiveness. *** The sha-bang ( #!) [5] at the head of a script tells your system that this file is a set of commands to be fed to the command interpreter indicated. The #! is actually a two-byte [6] magic number, a special marker that designates a file type, or in this case an executable shell script (type man magic for more details on this fascinating topic). Immediately following the sha-bang is a path name. This is the path to the program that interprets the commands in the script, whether it be a shell, a programming language, or a utility. This command interpreter then executes the commands in the script, starting at the top (the line following the sha-bang line), and ignoring comments. [7] #!/bin/sh #!/bin/bash #!/usr/bin/perl #!/usr/bin/tcl #!/bin/sed -f #!/usr/awk -f Each of the above script header lines calls a different command interpreter, be it /bin/sh, the default shell (bash in a Linux system) or otherwise. [8] Using #!/bin/sh, the default Bourne shell in most commercial variants of UNIX, makes the script portable to non-Linux machines, though you sacrifice Bash-specific features. The script will, however, conform to the POSIX [9] sh standard. Note that the path given at the "sha-bang" must be correct, otherwise an error message -- usually "Command not found." -- will be the only result of running the script. [10] #! can be omitted if the script consists only of a set of generic system commands, using no internal shell directives. The second example, above, requires the initial #!, since the variable assignment line, lines=50, uses a shell-specific construct. [11] Note again that #!/bin/sh invokes the default shell interpreter, which defaults to /bin/bash on a Linux machine. This tutorial encourages a modular approach to constructing a script. Make note of and collect "boilerplate" code snippets that might be useful in future scripts. Eventually you will build quite an extensive library of nifty routines. As an example, the following script prolog tests whether the script has been invoked with the correct number of parameters. E_WRONG_ARGS=85 Chapter 2. Starting Off With a Sha-Bang 5
- 12. Advanced Bash-Scripting Guide script_parameters="-a -h -m -z" # -a = all, -h = help, etc. if [ $# -ne $Number_of_expected_args ] then echo "Usage: `basename $0` $script_parameters" # `basename $0` is the script's filename. exit $E_WRONG_ARGS fi Many times, you will write a script that carries out one particular task. The first script in this chapter is an example. Later, it might occur to you to generalize the script to do other, similar tasks. Replacing the literal ("hard-wired") constants by variables is a step in that direction, as is replacing repetitive code blocks by functions. 2.1. Invoking the script Having written the script, you can invoke it by sh scriptname, [12] or alternatively bash scriptname. (Not recommended is using sh <scriptname, since this effectively disables reading from stdin within the script.) Much more convenient is to make the script itself directly executable with a chmod. Either: chmod 555 scriptname (gives everyone read/execute permission) [13] or chmod +rx scriptname (gives everyone read/execute permission) chmod u+rx scriptname (gives only the script owner read/execute permission) Having made the script executable, you may now test it by ./scriptname. [14] If it begins with a "sha-bang" line, invoking the script calls the correct command interpreter to run it. As a final step, after testing and debugging, you would likely want to move it to /usr/local/bin (as root, of course), to make the script available to yourself and all other users as a systemwide executable. The script could then be invoked by simply typing scriptname [ENTER] from the command-line. 2.2. Preliminary Exercises 1. System administrators often write scripts to automate common tasks. Give several instances where such scripts would be useful. 2. Write a script that upon invocation shows the time and date, lists all logged-in users, and gives the system uptime. The script then saves this information to a logfile. Chapter 2. Starting Off With a Sha-Bang 6
- 13. Part 2. Basics Table of Contents 3. Special Characters 4. Introduction to Variables and Parameters 4.1. Variable Substitution 4.2. Variable Assignment 4.3. Bash Variables Are Untyped 4.4. Special Variable Types 5. Quoting 5.1. Quoting Variables 5.2. Escaping 6. Exit and Exit Status 7. Tests 7.1. Test Constructs 7.2. File test operators 7.3. Other Comparison Operators 7.4. Nested if/then Condition Tests 7.5. Testing Your Knowledge of Tests 8. Operations and Related Topics 8.1. Operators 8.2. Numerical Constants Part 2. Basics 7
- 14. Chapter 3. Special Characters What makes a character special? If it has a meaning beyond its literal meaning, a meta-meaning, then we refer to it as a special character. Special Characters Found In Scripts and Elsewhere # Comments. Lines beginning with a # (with the exception of #!) are comments and will not be executed. # This line is a comment. Comments may also occur following the end of a command. echo "A comment will follow." # Comment here. # ^ Note whitespace before # Comments may also follow whitespace at the beginning of a line. # A tab precedes this comment. Comments may even be embedded within a pipe. initial=( `cat "$startfile" | sed -e '/#/d' | tr -d 'n' | # Delete lines containing '#' comment character. sed -e 's/./. /g' -e 's/_/_ /g'` ) # Excerpted from life.sh script A command may not follow a comment on the same line. There is no method of terminating the comment, in order for "live code" to begin on the same line. Use a new line for the next command. Of course, a quoted or an escaped # in an echo statement does not begin a comment. Likewise, a # appears in certain parameter-substitution constructs and in numerical constant expressions. echo "The # here does not begin a comment." echo 'The # here does not begin a comment.' echo The # here does not begin a comment. echo The # here begins a comment. echo ${PATH#*:} # Parameter substitution, not a comment. echo $(( 2#101011 )) # Base conversion, not a comment. # Thanks, S.C. The standard quoting and escape characters (" ' ) escape the #. Certain pattern matching operations also use the #. ; Command separator [semicolon]. Permits putting two or more commands on the same line. echo hello; echo there if [ -x "$filename" ]; then # Note the space after the semicolon. Chapter 3. Special Characters 8
- 15. Advanced Bash-Scripting Guide #+ ^^ echo "File $filename exists."; cp $filename $filename.bak else # ^^ echo "File $filename not found."; touch $filename fi; echo "File test complete." Note that the ";" sometimes needs to be escaped. ;; Terminator in a case option [double semicolon]. case "$variable" in abc) echo "$variable = abc" ;; xyz) echo "$variable = xyz" ;; esac ;;&, ;& Terminators in a case option (version 4+ of Bash). . "dot" command [period]. Equivalent to source (see Example 14-22). This is a bash builtin. . "dot", as a component of a filename. When working with filenames, a leading dot is the prefix of a "hidden" file, a file that an ls will not normally show. bash$ touch .hidden-file bash$ ls -l total 10 -rw-r--r-- 1 bozo 4034 Jul 18 22:04 data1.addressbook -rw-r--r-- 1 bozo 4602 May 25 13:58 data1.addressbook.bak -rw-r--r-- 1 bozo 877 Dec 17 2000 employment.addressbook bash$ ls -al total 14 drwxrwxr-x 2 bozo bozo 1024 Aug 29 20:54 ./ drwx------ 52 bozo bozo 3072 Aug 29 20:51 ../ -rw-r--r-- 1 bozo bozo 4034 Jul 18 22:04 data1.addressbook -rw-r--r-- 1 bozo bozo 4602 May 25 13:58 data1.addressbook.bak -rw-r--r-- 1 bozo bozo 877 Dec 17 2000 employment.addressbook -rw-rw-r-- 1 bozo bozo 0 Aug 29 20:54 .hidden-file When considering directory names, a single dot represents the current working directory, and two dots denote the parent directory. bash$ pwd /home/bozo/projects bash$ cd . bash$ pwd /home/bozo/projects bash$ cd .. bash$ pwd /home/bozo/ The dot often appears as the destination (directory) of a file movement command, in this context meaning current directory. Chapter 3. Special Characters 9
- 16. Advanced Bash-Scripting Guide bash$ cp /home/bozo/current_work/junk/* . Copy all the "junk" files to $PWD. . "dot" character match. When matching characters, as part of a regular expression, a "dot" matches a single character. " partial quoting [double quote]. "STRING" preserves (from interpretation) most of the special characters within STRING. See Chapter 5. ' full quoting [single quote]. 'STRING' preserves all special characters within STRING. This is a stronger form of quoting than "STRING". See Chapter 5. , comma operator. The comma operator [15] links together a series of arithmetic operations. All are evaluated, but only the last one is returned. let "t2 = ((a = 9, 15 / 3))" # Set "a = 9" and "t2 = 15 / 3" The comma operator can also concatenate strings. for file in /{,usr/}bin/*calc # ^ Find all executable files ending in "calc" #+ in /bin and /usr/bin directories. do if [ -x "$file" ] then echo $file fi done # /bin/ipcalc # /usr/bin/kcalc # /usr/bin/oidcalc # /usr/bin/oocalc # Thank you, Rory Winston, for pointing this out. ,, , Lowercase conversion in parameter substitution (added in version 4 of Bash). escape [backslash]. A quoting mechanism for single characters. X escapes the character X. This has the effect of "quoting" X, equivalent to 'X'. The may be used to quote " and ', so they are expressed literally. See Chapter 5 for an in-depth explanation of escaped characters. / Filename path separator [forward slash]. Separates the components of a filename (as in /home/bozo/projects/Makefile). This is also the division arithmetic operator. ` command substitution. The `command` construct makes available the output of command for assignment to a variable. This is also known as backquotes or backticks. Chapter 3. Special Characters 10
- 17. Advanced Bash-Scripting Guide : null command [colon]. This is the shell equivalent of a "NOP" (no op, a do-nothing operation). It may be considered a synonym for the shell builtin true. The ":" command is itself a Bash builtin, and its exit status is true (0). : echo $? # 0 Endless loop: while : do operation-1 operation-2 ... operation-n done # Same as: # while true # do # ... # done Placeholder in if/then test: if condition then : # Do nothing and branch ahead else # Or else ... take-some-action fi Provide a placeholder where a binary operation is expected, see Example 8-2 and default parameters. : ${username=`whoami`} # ${username=`whoami`} Gives an error without the leading : # unless "username" is a command or builtin... Provide a placeholder where a command is expected in a here document. See Example 18-10. Evaluate string of variables using parameter substitution (as in Example 9-16). : ${HOSTNAME?} ${USER?} ${MAIL?} # Prints error message #+ if one or more of essential environmental variables not set. Variable expansion / substring replacement. In combination with the > redirection operator, truncates a file to zero length, without changing its permissions. If the file did not previously exist, creates it. : > data.xxx # File "data.xxx" now empty. # Same effect as cat /dev/null >data.xxx # However, this does not fork a new process, since ":" is a builtin. See also Example 15-15. In combination with the >> redirection operator, has no effect on a pre-existing target file (: >> target_file). If the file did not previously exist, creates it. Chapter 3. Special Characters 11
- 18. Advanced Bash-Scripting Guide This applies to regular files, not pipes, symlinks, and certain special files. May be used to begin a comment line, although this is not recommended. Using # for a comment turns off error checking for the remainder of that line, so almost anything may appear in a comment. However, this is not the case with :. : This is a comment that generates an error, ( if [ $x -eq 3] ). The ":" also serves as a field separator, in /etc/passwd, and in the $PATH variable. bash$ echo $PATH /usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/sbin:/usr/sbin:/usr/games ! reverse (or negate) the sense of a test or exit status [bang]. The ! operator inverts the exit status of the command to which it is applied (see Example 6-2). It also inverts the meaning of a test operator. This can, for example, change the sense of equal ( = ) to not-equal ( != ). The ! operator is a Bash keyword. In a different context, the ! also appears in indirect variable references. In yet another context, from the command line, the ! invokes the Bash history mechanism (see Appendix K). Note that within a script, the history mechanism is disabled. * wild card [asterisk]. The * character serves as a "wild card" for filename expansion in globbing. By itself, it matches every filename in a given directory. bash$ echo * abs-book.sgml add-drive.sh agram.sh alias.sh The * also represents any number (or zero) characters in a regular expression. * arithmetic operator. In the context of arithmetic operations, the * denotes multiplication. ** A double asterisk can represent the exponentiation operator or extended file-match globbing. ? test operator. Within certain expressions, the ? indicates a test for a condition. In a double-parentheses construct, the ? can serve as an element of a C-style trinary operator, ?:. (( var0 = var1<98?9:21 )) # ^ ^ # if [ "$var1" -lt 98 ] # then # var0=9 # else # var0=21 # fi In a parameter substitution expression, the ? tests whether a variable has been set. ? wild card. The ? character serves as a single-character "wild card" for filename expansion in globbing, as well as representing one character in an extended regular expression. Chapter 3. Special Characters 12
- 19. Advanced Bash-Scripting Guide $ Variable substitution (contents of a variable). var1=5 var2=23skidoo echo $var1 # 5 echo $var2 # 23skidoo A $ prefixing a variable name indicates the value the variable holds. $ end-of-line. In a regular expression, a "$" addresses the end of a line of text. ${} Parameter substitution. $*, $@ positional parameters. $? exit status variable. The $? variable holds the exit status of a command, a function, or of the script itself. $$ process ID variable. The $$ variable holds the process ID [16] of the script in which it appears. () command group. (a=hello; echo $a) A listing of commands within parentheses starts a subshell. Variables inside parentheses, within the subshell, are not visible to the rest of the script. The parent process, the script, cannot read variables created in the child process, the subshell. a=123 ( a=321; ) echo "a = $a" # a = 123 # "a" within parentheses acts like a local variable. array initialization. Array=(element1 element2 element3) {xxx,yyy,zzz,...} Brace expansion. echo "{These,words,are,quoted}" # " prefix and suffix # "These" "words" "are" "quoted" cat {file1,file2,file3} > combined_file # Concatenates the files file1, file2, and file3 into combined_file. cp file22.{txt,backup} # Copies "file22.txt" to "file22.backup" Chapter 3. Special Characters 13
- 20. Advanced Bash-Scripting Guide A command may act upon a comma-separated list of file specs within braces. [17] Filename expansion (globbing) applies to the file specs between the braces. No spaces allowed within the braces unless the spaces are quoted or escaped. echo {file1,file2} :{ A," B",' C'} file1 : A file1 : B file1 : C file2 : A file2 : B file2 : C {a..z} Extended Brace expansion. echo {a..z} # a b c d e f g h i j k l m n o p q r s t u v w x y z # Echoes characters between a and z. echo {0..3} # 0 1 2 3 # Echoes characters between 0 and 3. The {a..z} extended brace expansion construction is a feature introduced in version 3 of Bash. {} Block of code [curly brackets]. Also referred to as an inline group, this construct, in effect, creates an anonymous function (a function without a name). However, unlike in a "standard" function, the variables inside a code block remain visible to the remainder of the script. bash$ { local a; a=123; } bash: local: can only be used in a function a=123 { a=321; } echo "a = $a" # a = 321 (value inside code block) # Thanks, S.C. The code block enclosed in braces may have I/O redirected to and from it. Example 3-1. Code blocks and I/O redirection #!/bin/bash # Reading lines in /etc/fstab. File=/etc/fstab { read line1 read line2 } < $File echo "First line in $File is:" echo "$line1" echo echo "Second line in $File is:" echo "$line2" Chapter 3. Special Characters 14
- 21. Advanced Bash-Scripting Guide exit 0 # Now, how do you parse the separate fields of each line? # Hint: use awk, or . . . # . . . Hans-Joerg Diers suggests using the "set" Bash builtin. Example 3-2. Saving the output of a code block to a file #!/bin/bash # rpm-check.sh # Queries an rpm file for description, listing, #+ and whether it can be installed. # Saves output to a file. # # This script illustrates using a code block. SUCCESS=0 E_NOARGS=65 if [ -z "$1" ] then echo "Usage: `basename $0` rpm-file" exit $E_NOARGS fi { # Begin code block. echo echo "Archive Description:" rpm -qpi $1 # Query description. echo echo "Archive Listing:" rpm -qpl $1 # Query listing. echo rpm -i --test $1 # Query whether rpm file can be installed. if [ "$?" -eq $SUCCESS ] then echo "$1 can be installed." else echo "$1 cannot be installed." fi echo # End code block. } > "$1.test" # Redirects output of everything in block to file. echo "Results of rpm test in file $1.test" # See rpm man page for explanation of options. exit 0 Unlike a command group within (parentheses), as above, a code block enclosed by {braces} will not normally launch a subshell. [18] {} placeholder for text. Used after xargs -i (replace strings option). The {} double curly brackets are a placeholder for output text. Chapter 3. Special Characters 15
- 22. Advanced Bash-Scripting Guide ls . | xargs -i -t cp ./{} $1 # ^^ ^^ # From "ex42.sh" (copydir.sh) example. anchor id="semicolonesc"> {} ; pathname. Mostly used in find constructs. This is not a shell builtin. The ";" ends the -exec option of a find command sequence. It needs to be escaped to protect it from interpretation by the shell. [] test. Test expression between [ ]. Note that [ is part of the shell builtin test (and a synonym for it), not a link to the external command /usr/bin/test. [[ ]] test. Test expression between [[ ]]. More flexible than the single-bracket [ ] test, this is a shell keyword. See the discussion on the [[ ... ]] construct. [] array element. In the context of an array, brackets set off the numbering of each element of that array. Array[1]=slot_1 echo ${Array[1]} [] range of characters. As part of a regular expression, brackets delineate a range of characters to match. $[ ... ] integer expansion. Evaluate integer expression between $[ ]. a=3 b=7 echo $[$a+$b] # 10 echo $[$a*$b] # 21 Note that this usage is deprecated, and has been replaced by the (( ... )) construct. (( )) integer expansion. Expand and evaluate integer expression between (( )). See the discussion on the (( ... )) construct. > &> >& >> < <> redirection. Chapter 3. Special Characters 16
- 23. Advanced Bash-Scripting Guide scriptname >filename redirects the output of scriptname to file filename. Overwrite filename if it already exists. command &>filename redirects both the stdout and the stderr of command to filename. This is useful for suppressing output when testing for a condition. For example, let us test whether a certain command exists. bash$ type bogus_command &>/dev/null bash$ echo $? 1 Or in a script: command_test () { type "$1" &>/dev/null; } # ^ cmd=rmdir # Legitimate command. command_test $cmd; echo $? # 0 cmd=bogus_command # Illegitimate command command_test $cmd; echo $? # 1 command >&2 redirects stdout of command to stderr. scriptname >>filename appends the output of scriptname to file filename. If filename does not already exist, it is created. [i]<>filename opens file filename for reading and writing, and assigns file descriptor i to it. If filename does not exist, it is created. process substitution. (command)> <(command) In a different context, the "<" and ">" characters act as string comparison operators. In yet another context, the "<" and ">" characters act as integer comparison operators. See also Example 15-9. << redirection used in a here document. <<< redirection used in a here string. <, > ASCII comparison. Chapter 3. Special Characters 17
- 24. Advanced Bash-Scripting Guide veg1=carrots veg2=tomatoes if [[ "$veg1" < "$veg2" ]] then echo "Although $veg1 precede $veg2 in the dictionary," echo -n "this does not necessarily imply anything " echo "about my culinary preferences." else echo "What kind of dictionary are you using, anyhow?" fi <, > word boundary in a regular expression. bash$ grep '<the>' textfile | pipe. Passes the output (stdout of a previous command to the input (stdin) of the next one, or to the shell. This is a method of chaining commands together. echo ls -l | sh # Passes the output of "echo ls -l" to the shell, #+ with the same result as a simple "ls -l". cat *.lst | sort | uniq # Merges and sorts all ".lst" files, then deletes duplicate lines. A pipe, as a classic method of interprocess communication, sends the stdout of one process to the stdin of another. In a typical case, a command, such as cat or echo, pipes a stream of data to a filter, a command that transforms its input for processing. [19] cat $filename1 $filename2 | grep $search_word For an interesting note on the complexity of using UNIX pipes, see the UNIX FAQ, Part 3. The output of a command or commands may be piped to a script. #!/bin/bash # uppercase.sh : Changes input to uppercase. tr 'a-z' 'A-Z' # Letter ranges must be quoted #+ to prevent filename generation from single-letter filenames. exit 0 Now, let us pipe the output of ls -l to this script. bash$ ls -l | ./uppercase.sh -RW-RW-R-- 1 BOZO BOZO 109 APR 7 19:49 1.TXT -RW-RW-R-- 1 BOZO BOZO 109 APR 14 16:48 2.TXT -RW-R--R-- 1 BOZO BOZO 725 APR 20 20:56 DATA-FILE The stdout of each process in a pipe must be read as the stdin of the next. If this is not the case, the data stream will block, and the pipe will not behave as expected. Chapter 3. Special Characters 18
- 25. Advanced Bash-Scripting Guide cat file1 file2 | ls -l | sort # The output from "cat file1 file2" disappears. A pipe runs as a child process, and therefore cannot alter script variables. variable="initial_value" echo "new_value" | read variable echo "variable = $variable" # variable = initial_value If one of the commands in the pipe aborts, this prematurely terminates execution of the pipe. Called a broken pipe, this condition sends a SIGPIPE signal. >| force redirection (even if the noclobber option is set). This will forcibly overwrite an existing file. || OR logical operator. In a test construct, the || operator causes a return of 0 (success) if either of the linked test conditions is true. & Run job in background. A command followed by an & will run in the background. bash$ sleep 10 & [1] 850 [1]+ Done sleep 10 Within a script, commands and even loops may run in the background. Example 3-3. Running a loop in the background #!/bin/bash # background-loop.sh for i in 1 2 3 4 5 6 7 8 9 10 # First loop. do echo -n "$i " done & # Run this loop in background. # Will sometimes execute after second loop. echo # This 'echo' sometimes will not display. for i in 11 12 13 14 15 16 17 18 19 20 # Second loop. do echo -n "$i " done echo # This 'echo' sometimes will not display. # ====================================================== # The expected output from the script: # 1 2 3 4 5 6 7 8 9 10 # 11 12 13 14 15 16 17 18 19 20 # Sometimes, though, you get: # 11 12 13 14 15 16 17 18 19 20 # 1 2 3 4 5 6 7 8 9 10 bozo $ # (The second 'echo' doesn't execute. Why?) # Occasionally also: Chapter 3. Special Characters 19
- 26. Advanced Bash-Scripting Guide # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 # (The first 'echo' doesn't execute. Why?) # Very rarely something like: # 11 12 13 1 2 3 4 5 6 7 8 9 10 14 15 16 17 18 19 20 # The foreground loop preempts the background one. exit 0 # Nasimuddin Ansari suggests adding sleep 1 #+ after the echo -n "$i" in lines 6 and 14, #+ for some real fun. A command run in the background within a script may cause the script to hang, waiting for a keystroke. Fortunately, there is a remedy for this. && AND logical operator. In a test construct, the && operator causes a return of 0 (success) only if both the linked test conditions are true. - option, prefix. Option flag for a command or filter. Prefix for an operator. Prefix for a default parameter in parameter substitution. COMMAND -[Option1][Option2][...] ls -al sort -dfu $filename if [ $file1 -ot $file2 ] then # ^ echo "File $file1 is older than $file2." fi if [ "$a" -eq "$b" ] then ^ echo "$a is equal to $b." fi if [ "$c" -eq 24 -a "$d" -eq 47 ] then ^ ^ echo "$c equals 24 and $d equals 47." fi param2=${param1:-$DEFAULTVAL} # ^ -- The double-dash -- prefixes long (verbatim) options to commands. sort --ignore-leading-blanks Used with a Bash builtin, it means the end of options to that particular command. Chapter 3. Special Characters 20
- 27. Advanced Bash-Scripting Guide This provides a handy means of removing files whose names begin with a dash. bash$ ls -l -rw-r--r-- 1 bozo bozo 0 Nov 25 12:29 -badname bash$ rm -- -badname bash$ ls -l total 0 The double-dash is also used in conjunction with set. set -- $variable (as in Example 14-18) - redirection from/to stdin or stdout [dash]. bash$ cat - abc abc ... Ctl-D As expected, cat - echoes stdin, in this case keyboarded user input, to stdout. But, does I/O redirection using - have real-world applications? (cd /source/directory && tar cf - . ) | (cd /dest/directory && tar xpvf -) # Move entire file tree from one directory to another # [courtesy Alan Cox <a.cox@swansea.ac.uk>, with a minor change] # 1) cd /source/directory # Source directory, where the files to be moved are. # 2) && # "And-list": if the 'cd' operation successful, # then execute the next command. # 3) tar cf - . # The 'c' option 'tar' archiving command creates a new archive, # the 'f' (file) option, followed by '-' designates the target file # as stdout, and do it in current directory tree ('.'). # 4) | # Piped to ... # 5) ( ... ) # a subshell # 6) cd /dest/directory # Change to the destination directory. # 7) && # "And-list", as above # 8) tar xpvf - # Unarchive ('x'), preserve ownership and file permissions ('p'), # and send verbose messages to stdout ('v'), # reading data from stdin ('f' followed by '-'). # # Note that 'x' is a command, and 'p', 'v', 'f' are options. # # Whew! # More elegant than, but equivalent to: Chapter 3. Special Characters 21
- 28. Advanced Bash-Scripting Guide # cd source/directory # tar cf - . | (cd ../dest/directory; tar xpvf -) # # Also having same effect: # cp -a /source/directory/* /dest/directory # Or: # cp -a /source/directory/* /source/directory/.[^.]* /dest/directory # If there are hidden files in /source/directory. bunzip2 -c linux-2.6.16.tar.bz2 | tar xvf - # --uncompress tar file-- | --then pass it to "tar"-- # If "tar" has not been patched to handle "bunzip2", #+ this needs to be done in two discrete steps, using a pipe. # The purpose of the exercise is to unarchive "bzipped" kernel source. Note that in this context the "-" is not itself a Bash operator, but rather an option recognized by certain UNIX utilities that write to stdout, such as tar, cat, etc. bash$ echo "whatever" | cat - whatever Where a filename is expected, - redirects output to stdout (sometimes seen with tar cf), or accepts input from stdin, rather than from a file. This is a method of using a file-oriented utility as a filter in a pipe. bash$ file Usage: file [-bciknvzL] [-f namefile] [-m magicfiles] file... By itself on the command-line, file fails with an error message. Add a "-" for a more useful result. This causes the shell to await user input. bash$ file - abc standard input: ASCII text bash$ file - #!/bin/bash standard input: Bourne-Again shell script text executable Now the command accepts input from stdin and analyzes it. The "-" can be used to pipe stdout to other commands. This permits such stunts as prepending lines to a file. Using diff to compare a file with a section of another: grep Linux file1 | diff file2 - Finally, a real-world example using - with tar. Example 3-4. Backup of all files changed in last day #!/bin/bash Chapter 3. Special Characters 22
- 29. Advanced Bash-Scripting Guide # Backs up all files in current directory modified within last 24 hours #+ in a "tarball" (tarred and gzipped file). BACKUPFILE=backup-$(date +%m-%d-%Y) # Embeds date in backup filename. # Thanks, Joshua Tschida, for the idea. archive=${1:-$BACKUPFILE} # If no backup-archive filename specified on command-line, #+ it will default to "backup-MM-DD-YYYY.tar.gz." tar cvf - `find . -mtime -1 -type f -print` > $archive.tar gzip $archive.tar echo "Directory $PWD backed up in archive file "$archive.tar.gz"." # Stephane Chazelas points out that the above code will fail #+ if there are too many files found #+ or if any filenames contain blank characters. # He suggests the following alternatives: # ------------------------------------------------------------------- # find . -mtime -1 -type f -print0 | xargs -0 tar rvf "$archive.tar" # using the GNU version of "find". # find . -mtime -1 -type f -exec tar rvf "$archive.tar" '{}' ; # portable to other UNIX flavors, but much slower. # ------------------------------------------------------------------- exit 0 Filenames beginning with "-" may cause problems when coupled with the "-" redirection operator. A script should check for this and add an appropriate prefix to such filenames, for example ./-FILENAME, $PWD/-FILENAME, or $PATHNAME/-FILENAME. If the value of a variable begins with a -, this may likewise create problems. var="-n" echo $var # Has the effect of "echo -n", and outputs nothing. - previous working directory. A cd - command changes to the previous working directory. This uses the $OLDPWD environmental variable. Do not confuse the "-" used in this sense with the "-" redirection operator just discussed. The interpretation of the "-" depends on the context in which it appears. - Minus. Minus sign in an arithmetic operation. = Equals. Assignment operator a=28 echo $a # 28 Chapter 3. Special Characters 23
- 30. Advanced Bash-Scripting Guide In a different context, the "=" is a string comparison operator. + Plus. Addition arithmetic operator. In a different context, the + is a Regular Expression operator. + Option. Option flag for a command or filter. Certain commands and builtins use the + to enable certain options and the - to disable them. In parameter substitution, the + prefixes an alternate value that a variable expands to. % modulo. Modulo (remainder of a division) arithmetic operation. let "z = 5 % 3" echo $z # 2 In a different context, the % is a pattern matching operator. ~ home directory [tilde]. This corresponds to the $HOME internal variable. ~bozo is bozo's home directory, and ls ~bozo lists the contents of it. ~/ is the current user's home directory, and ls ~/ lists the contents of it. bash$ echo ~bozo /home/bozo bash$ echo ~ /home/bozo bash$ echo ~/ /home/bozo/ bash$ echo ~: /home/bozo: bash$ echo ~nonexistent-user ~nonexistent-user ~+ current working directory. This corresponds to the $PWD internal variable. ~- previous working directory. This corresponds to the $OLDPWD internal variable. =~ regular expression match. This operator was introduced with version 3 of Bash. ^ beginning-of-line. In a regular expression, a "^" addresses the beginning of a line of text. ^, ^^ Uppercase conversion in parameter substitution (added in version 4 of Bash). Control Characters change the behavior of the terminal or text display. A control character is a CONTROL + key combination (pressed simultaneously). A control character may also be written in octal or hexadecimal notation, following an escape. Control characters are not normally useful inside a script. Chapter 3. Special Characters 24
- 31. Advanced Bash-Scripting Guide ◊ Ctl-A Moves cursor to beginning of line of text (on the command-line). ◊ Ctl-B Backspace (nondestructive). ◊ Ctl-C Break. Terminate a foreground job. ◊ Ctl-D Log out from a shell (similar to exit). EOF (end-of-file). This also terminates input from stdin. When typing text on the console or in an xterm window, Ctl-D erases the character under the cursor. When there are no characters present, Ctl-D logs out of the session, as expected. In an xterm window, this has the effect of closing the window. ◊ Ctl-E Moves cursor to end of line of text (on the command-line). ◊ Ctl-F Moves cursor forward one character position (on the command-line). ◊ Ctl-G BEL. On some old-time teletype terminals, this would actually ring a bell. In an xterm it might beep. ◊ Ctl-H Rubout (destructive backspace). Erases characters the cursor backs over while backspacing. #!/bin/bash # Embedding Ctl-H in a string. a="^H^H" # Two Ctl-H's -- backspaces # ctl-V ctl-H, using vi/vim echo "abcdef" # abcdef echo echo -n "abcdef$a " # abcd f # Space at end ^ ^ Backspaces twice. echo echo -n "abcdef$a" # abcdef # No space at end ^ Doesn't backspace (why?). # Results may not be quite as expected. echo; echo # Constantin Hagemeier suggests trying: # a=$'010010' # a=$'bb' Chapter 3. Special Characters 25
- 32. Advanced Bash-Scripting Guide # a=$'x08x08' # But, this does not change the results. ◊ Ctl-I Horizontal tab. ◊ Ctl-J Newline (line feed). In a script, may also be expressed in octal notation -- '012' or in hexadecimal -- 'x0a'. ◊ Ctl-K Vertical tab. When typing text on the console or in an xterm window, Ctl-K erases from the character under the cursor to end of line. Within a script, Ctl-K may behave differently, as in Lee Lee Maschmeyer's example, below. ◊ Ctl-L Formfeed (clear the terminal screen). In a terminal, this has the same effect as the clear command. When sent to a printer, a Ctl-L causes an advance to end of the paper sheet. ◊ Ctl-M Carriage return. #!/bin/bash # Thank you, Lee Maschmeyer, for this example. read -n 1 -s -p $'Control-M leaves cursor at beginning of this line. Press Enter. x0d' # Of course, '0d' is the hex equivalent of Control-M. echo >&2 # The '-s' makes anything typed silent, #+ so it is necessary to go to new line explicitly. read -n 1 -s -p $'Control-J leaves cursor on next line. x0a' # '0a' is the hex equivalent of Control-J, linefeed. echo >&2 ### read -n 1 -s -p $'And Control-Kx0bgoes straight down.' echo >&2 # Control-K is vertical tab. # A better example of the effect of a vertical tab is: var=$'x0aThis is the bottom linex0bThis is the top linex0a' echo "$var" # This works the same way as the above example. However: echo "$var" | col # This causes the right end of the line to be higher than the left end. # It also explains why we started and ended with a line feed -- #+ to avoid a garbled screen. # As Lee Maschmeyer explains: # -------------------------- Chapter 3. Special Characters 26
- 33. Advanced Bash-Scripting Guide # In the [first vertical tab example] . . . the vertical tab #+ makes the printing go straight down without a carriage return. # This is true only on devices, such as the Linux console, #+ that can't go "backward." # The real purpose of VT is to go straight UP, not down. # It can be used to print superscripts on a printer. # The col utility can be used to emulate the proper behavior of VT. exit 0 ◊ Ctl-N Erases a line of text recalled from history buffer [20] (on the command-line). ◊ Ctl-O Issues a newline (on the command-line). ◊ Ctl-P Recalls last command from history buffer (on the command-line). ◊ Ctl-Q Resume (XON). This resumes stdin in a terminal. ◊ Ctl-R Backwards search for text in history buffer (on the command-line). ◊ Ctl-S Suspend (XOFF). This freezes stdin in a terminal. (Use Ctl-Q to restore input.) ◊ Ctl-T Reverses the position of the character the cursor is on with the previous character (on the command-line). ◊ Ctl-U Erase a line of input, from the cursor backward to beginning of line. In some settings, Ctl-U erases the entire line of input, regardless of cursor position. ◊ Ctl-V When inputting text, Ctl-V permits inserting control characters. For example, the following two are equivalent: echo -e 'x0a' echo <Ctl-V><Ctl-J> Ctl-V is primarily useful from within a text editor. ◊ Ctl-W When typing text on the console or in an xterm window, Ctl-W erases from the character under the cursor backwards to the first instance of whitespace. In some settings, Ctl-W erases backwards to first non-alphanumeric character. Chapter 3. Special Characters 27
- 34. Advanced Bash-Scripting Guide ◊ Ctl-X In certain word processing programs, Cuts highlighted text and copies to clipboard. ◊ Ctl-Y Pastes back text previously erased (with Ctl-K or Ctl-U). ◊ Ctl-Z Pauses a foreground job. Substitute operation in certain word processing applications. EOF (end-of-file) character in the MSDOS filesystem. Whitespace functions as a separator between commands and/or variables. Whitespace consists of either spaces, tabs, blank lines, or any combination thereof. [21] In some contexts, such as variable assignment, whitespace is not permitted, and results in a syntax error. Blank lines have no effect on the action of a script, and are therefore useful for visually separating functional sections. $IFS, the special variable separating fields of input to certain commands. It defaults to whitespace. Definition: A field is a discrete chunk of data expressed as a string of consecutive characters. Separating each field from adjacent fields is either whitespace or some other designated character (often determined by the $IFS). In some contexts, a field may be called a record. To preserve whitespace within a string or in a variable, use quoting. UNIX filters can target and operate on whitespace using the POSIX character class [:space:]. Chapter 3. Special Characters 28
- 35. Chapter 4. Introduction to Variables and Parameters Variables are how programming and scripting languages represent data. A variable is nothing more than a label, a name assigned to a location or set of locations in computer memory holding an item of data. Variables appear in arithmetic operations and manipulation of quantities, and in string parsing. 4.1. Variable Substitution The name of a variable is a placeholder for its value, the data it holds. Referencing (retrieving) its value is called variable substitution. $ Let us carefully distinguish between the name of a variable and its value. If variable1 is the name of a variable, then $variable1 is a reference to its value, the data item it contains. [22] bash$ variable1=23 bash$ echo variable1 variable1 bash$ echo $variable1 23 The only time a variable appears "naked" -- without the $ prefix -- is when declared or assigned, when unset, when exported, or in the special case of a variable representing a signal (see Example 29-5). Assignment may be with an = (as in var1=27), in a read statement, and at the head of a loop (for var2 in 1 2 3). Enclosing a referenced value in double quotes (" ... ") does not interfere with variable substitution. This is called partial quoting, sometimes referred to as "weak quoting." Using single quotes (' ... ') causes the variable name to be used literally, and no substitution will take place. This is full quoting, sometimes referred to as 'strong quoting.' See Chapter 5 for a detailed discussion. Note that $variable is actually a simplified form of ${variable}. In contexts where the $variable syntax causes an error, the longer form may work (see Section 9.3, below). Example 4-1. Variable assignment and substitution #!/bin/bash # ex9.sh # Variables: assignment and substitution a=375 hello=$a Chapter 4. Introduction to Variables and Parameters 29
- 36. Advanced Bash-Scripting Guide #------------------------------------------------------------------------- # No space permitted on either side of = sign when initializing variables. # What happens if there is a space? # "VARIABLE =value" # ^ #% Script tries to run "VARIABLE" command with one argument, "=value". # "VARIABLE= value" # ^ #% Script tries to run "value" command with #+ the environmental variable "VARIABLE" set to "". #------------------------------------------------------------------------- echo hello # hello # Not a variable reference, just the string "hello" . . . echo $hello # 375 # ^ This *is* a variable reference. echo ${hello} # 375 # Also a variable reference, as above. # Quoting . . . echo "$hello" # 375 echo "${hello}" # 375 echo hello="A B C D" echo $hello # A B C D echo "$hello" # A B C D # As you see, echo $hello and echo "$hello" give different results. # Why? # ======================================= # Quoting a variable preserves whitespace. # ======================================= echo echo '$hello' # $hello # ^ ^ # Variable referencing disabled (escaped) by single quotes, #+ which causes the "$" to be interpreted literally. # Notice the effect of different types of quoting. hello= # Setting it to a null value. echo "$hello (null value) = $hello" # Note that setting a variable to a null value is not the same as #+ unsetting it, although the end result is the same (see below). # -------------------------------------------------------------- # It is permissible to set multiple variables on the same line, #+ if separated by white space. # Caution, this may reduce legibility, and may not be portable. var1=21 var2=22 var3=$V3 echo echo "var1=$var1 var2=$var2 var3=$var3" Chapter 4. Introduction to Variables and Parameters 30
- 37. Advanced Bash-Scripting Guide # May cause problems with older versions of "sh" . . . # -------------------------------------------------------------- echo; echo numbers="one two three" # ^ ^ other_numbers="1 2 3" # ^ ^ # If there is whitespace embedded within a variable, #+ then quotes are necessary. # other_numbers=1 2 3 # Gives an error message. echo "numbers = $numbers" echo "other_numbers = $other_numbers" # other_numbers = 1 2 3 # Escaping the whitespace also works. mixed_bag=2 --- Whatever # ^ ^ Space after escape (). echo "$mixed_bag" # 2 --- Whatever echo; echo echo "uninitialized_variable = $uninitialized_variable" # Uninitialized variable has null value (no value at all!). uninitialized_variable= # Declaring, but not initializing it -- #+ same as setting it to a null value, as above. echo "uninitialized_variable = $uninitialized_variable" # It still has a null value. uninitialized_variable=23 # Set it. unset uninitialized_variable # Unset it. echo "uninitialized_variable = $uninitialized_variable" # It still has a null value. echo exit 0 An uninitialized variable has a "null" value -- no assigned value at all (not zero!). if [ -z "$unassigned" ] then echo "$unassigned is NULL." fi # $unassigned is NULL. Using a variable before assigning a value to it may cause problems. It is nevertheless possible to perform arithmetic operations on an uninitialized variable. echo "$uninitialized" # (blank line) let "uninitialized += 5" # Add 5 to it. echo "$uninitialized" # 5 # Conclusion: # An uninitialized variable has no value, #+ however it acts as if it were 0 in an arithmetic operation. # This is undocumented (and probably non-portable) behavior, #+ and should not be used in a script. See also Example 14-23. Chapter 4. Introduction to Variables and Parameters 31
- 38. Advanced Bash-Scripting Guide 4.2. Variable Assignment = the assignment operator (no space before and after) Do not confuse this with = and -eq, which test, rather than assign! Note that = can be either an assignment or a test operator, depending on context. Example 4-2. Plain Variable Assignment #!/bin/bash # Naked variables echo # When is a variable "naked", i.e., lacking the '$' in front? # When it is being assigned, rather than referenced. # Assignment a=879 echo "The value of "a" is $a." # Assignment using 'let' let a=16+5 echo "The value of "a" is now $a." echo # In a 'for' loop (really, a type of disguised assignment): echo -n "Values of "a" in the loop are: " for a in 7 8 9 11 do echo -n "$a " done echo echo # In a 'read' statement (also a type of assignment): echo -n "Enter "a" " read a echo "The value of "a" is now $a." echo exit 0 Example 4-3. Variable Assignment, plain and fancy #!/bin/bash a=23 # Simple case echo $a Chapter 4. Introduction to Variables and Parameters 32
- 39. Advanced Bash-Scripting Guide b=$a echo $b # Now, getting a little bit fancier (command substitution). a=`echo Hello!` # Assigns result of 'echo' command to 'a' ... echo $a # Note that including an exclamation mark (!) within a #+ command substitution construct will not work from the command-line, #+ since this triggers the Bash "history mechanism." # Inside a script, however, the history functions are disabled. a=`ls -l` # Assigns result of 'ls -l' command to 'a' echo $a # Unquoted, however, it removes tabs and newlines. echo echo "$a" # The quoted variable preserves whitespace. # (See the chapter on "Quoting.") exit 0 Variable assignment using the $(...) mechanism (a newer method than backquotes). This is actually a form of command substitution. # From /etc/rc.d/rc.local R=$(cat /etc/redhat-release) arch=$(uname -m) 4.3. Bash Variables Are Untyped Unlike many other programming languages, Bash does not segregate its variables by "type." Essentially, Bash variables are character strings, but, depending on context, Bash permits arithmetic operations and comparisons on variables. The determining factor is whether the value of a variable contains only digits. Example 4-4. Integer or string? #!/bin/bash # int-or-string.sh a=2334 # Integer. let "a += 1" echo "a = $a " # a = 2335 echo # Integer, still. b=${a/23/BB} # Substitute "BB" for "23". # This transforms $b into a string. echo "b = $b" # b = BB35 declare -i b # Declaring it an integer doesn't help. echo "b = $b" # b = BB35 let "b += 1" # BB35 + 1 echo "b = $b" # b = 1 echo # Bash sets the "integer value" of a string to 0. c=BB34 Chapter 4. Introduction to Variables and Parameters 33
- 40. Advanced Bash-Scripting Guide echo "c = $c" # c = BB34 d=${c/BB/23} # Substitute "23" for "BB". # This makes $d an integer. echo "d = $d" # d = 2334 let "d += 1" # 2334 + 1 echo "d = $d" # d = 2335 echo # What about null variables? e='' # ... Or e="" ... Or e= echo "e = $e" # e = let "e += 1" # Arithmetic operations allowed on a null variable? echo "e = $e" # e = 1 echo # Null variable transformed into an integer. # What about undeclared variables? echo "f = $f" # f = let "f += 1" # Arithmetic operations allowed? echo "f = $f" # f = 1 echo # Undeclared variable transformed into an integer. # # However ... let "f /= $undecl_var" # Divide by zero? # let: f /= : syntax error: operand expected (error token is " ") # Syntax error! Variable $undecl_var is not set to zero here! # # But still ... let "f /= 0" # let: f /= 0: division by 0 (error token is "0") # Expected behavior. # Bash (usually) sets the "integer value" of null to zero #+ when performing an arithmetic operation. # But, don't try this at home, folks! # It's undocumented and probably non-portable behavior. # Conclusion: Variables in Bash are untyped, #+ with all attendant consequences. exit $? Untyped variables are both a blessing and a curse. They permit more flexibility in scripting and make it easier to grind out lines of code (and give you enough rope to hang yourself!). However, they likewise permit subtle errors to creep in and encourage sloppy programming habits. To lighten the burden of keeping track of variable types in a script, Bash does permit declaring variables. 4.4. Special Variable Types Local variables Variables visible only within a code block or function (see also local variables in functions) Environmental variables Variables that affect the behavior of the shell and user interface In a more general context, each process has an "environment", that is, a group of Chapter 4. Introduction to Variables and Parameters 34
- 41. Advanced Bash-Scripting Guide variables that the process may reference. In this sense, the shell behaves like any other process. Every time a shell starts, it creates shell variables that correspond to its own environmental variables. Updating or adding new environmental variables causes the shell to update its environment, and all the shell's child processes (the commands it executes) inherit this environment. The space allotted to the environment is limited. Creating too many environmental variables or ones that use up excessive space may cause problems. bash$ eval "`seq 10000 | sed -e 's/.*/export var&=ZZZZZZZZZZZZZZ/'`" bash$ du bash: /usr/bin/du: Argument list too long Note: this "error" has been fixed, as of kernel version 2.6.23. (Thank you, Stéphane Chazelas for the clarification, and for providing the above example.) If a script sets environmental variables, they need to be "exported," that is, reported to the environment local to the script. This is the function of the export command. A script can export variables only to child processes, that is, only to commands or processes which that particular script initiates. A script invoked from the command-line cannot export variables back to the command-line environment. Child processes cannot export variables back to the parent processes that spawned them. Definition: A child process is a subprocess launched by another process, its parent. Positional parameters Arguments passed to the script from the command line [23] : $0, $1, $2, $3 . . . $0 is the name of the script itself, $1 is the first argument, $2 the second, $3 the third, and so forth. [24] After $9, the arguments must be enclosed in brackets, for example, ${10}, ${11}, ${12}. The special variables $* and $@ denote all the positional parameters. Example 4-5. Positional Parameters #!/bin/bash # Call this script with at least 10 parameters, for example # ./scriptname 1 2 3 4 5 6 7 8 9 10 MINPARAMS=10 echo echo "The name of this script is "$0"." Chapter 4. Introduction to Variables and Parameters 35
- 42. Advanced Bash-Scripting Guide # Adds ./ for current directory echo "The name of this script is "`basename $0`"." # Strips out path name info (see 'basename') echo if [ -n "$1" ] # Tested variable is quoted. then echo "Parameter #1 is $1" # Need quotes to escape # fi if [ -n "$2" ] then echo "Parameter #2 is $2" fi if [ -n "$3" ] then echo "Parameter #3 is $3" fi # ... if [ -n "${10}" ] # Parameters > $9 must be enclosed in {brackets}. then echo "Parameter #10 is ${10}" fi echo "-----------------------------------" echo "All the command-line parameters are: "$*"" if [ $# -lt "$MINPARAMS" ] then echo echo "This script needs at least $MINPARAMS command-line arguments!" fi echo exit 0 Bracket notation for positional parameters leads to a fairly simple way of referencing the last argument passed to a script on the command-line. This also requires indirect referencing. args=$# # Number of args passed. lastarg=${!args} # Note: This is an *indirect reference* to $args ... # Or: lastarg=${!#} (Thanks, Chris Monson.) # This is an *indirect reference* to the $# variable. # Note that lastarg=${!$#} doesn't work. Some scripts can perform different operations, depending on which name they are invoked with. For this to work, the script needs to check $0, the name it was invoked by. There must also exist symbolic links to all the alternate names of the script. See Example 15-2. Chapter 4. Introduction to Variables and Parameters 36
- 43. Advanced Bash-Scripting Guide If a script expects a command-line parameter but is invoked without one, this may cause a null variable assignment, generally an undesirable result. One way to prevent this is to append an extra character to both sides of the assignment statement using the expected positional parameter. variable1_=$1_ # Rather than variable1=$1 # This will prevent an error, even if positional parameter is absent. critical_argument01=$variable1_ # The extra character can be stripped off later, like so. variable1=${variable1_/_/} # Side effects only if $variable1_ begins with an underscore. # This uses one of the parameter substitution templates discussed later. # (Leaving out the replacement pattern results in a deletion.) # A more straightforward way of dealing with this is #+ to simply test whether expected positional parameters have been passed. if [ -z $1 ] then exit $E_MISSING_POS_PARAM fi # However, as Fabian Kreutz points out, #+ the above method may have unexpected side-effects. # A better method is parameter substitution: # ${1:-$DefaultVal} # See the "Parameter Substition" section #+ in the "Variables Revisited" chapter. --- Example 4-6. wh, whois domain name lookup #!/bin/bash # ex18.sh # Does a 'whois domain-name' lookup on any of 3 alternate servers: # ripe.net, cw.net, radb.net # Place this script -- renamed 'wh' -- in /usr/local/bin # Requires symbolic links: # ln -s /usr/local/bin/wh /usr/local/bin/wh-ripe # ln -s /usr/local/bin/wh /usr/local/bin/wh-cw # ln -s /usr/local/bin/wh /usr/local/bin/wh-radb E_NOARGS=65 if [ -z "$1" ] then echo "Usage: `basename $0` [domain-name]" exit $E_NOARGS fi # Check script name and call proper server. case `basename $0` in # Or: case ${0##*/} in "wh" ) whois $1@whois.ripe.net;; Chapter 4. Introduction to Variables and Parameters 37
- 44. Advanced Bash-Scripting Guide "wh-ripe") whois $1@whois.ripe.net;; "wh-radb") whois $1@whois.radb.net;; "wh-cw" ) whois $1@whois.cw.net;; * ) echo "Usage: `basename $0` [domain-name]";; esac exit $? --- The shift command reassigns the positional parameters, in effect shifting them to the left one notch. $1 <--- $2, $2 <--- $3, $3 <--- $4, etc. The old $1 disappears, but $0 (the script name) does not change. If you use a large number of positional parameters to a script, shift lets you access those past 10, although {bracket} notation also permits this. Example 4-7. Using shift #!/bin/bash # shft.sh: Using 'shift' to step through all the positional parameters. # Name this script something like shft.sh, #+ and invoke it with some parameters. #+ For example: # sh shft.sh a b c def 23 Skidoo until [ -z "$1" ] # Until all parameters used up . . . do echo -n "$1 " shift done echo # Extra linefeed. # But, what happens to the "used-up" parameters? echo "$2" # Nothing echoes! # When $2 shifts into $1 (and there is no $3 to shift into $2) #+ then $2 remains empty. # So, it is not a parameter *copy*, but a *move*. exit # See also the echo-params.sh script for a "shiftless" #+ alternative method of stepping through the positional params. The shift command can take a numerical parameter indicating how many positions to shift. #!/bin/bash # shift-past.sh shift 3 # Shift 3 positions. # n=3; shift $n # Has the same effect. echo "$1" Chapter 4. Introduction to Variables and Parameters 38
- 45. Advanced Bash-Scripting Guide exit 0 # ======================== # $ sh shift-past.sh 1 2 3 4 5 4 # However, as Eleni Fragkiadaki, points out, #+ attempting a 'shift' past the number of #+ positional parameters ($#) returns an exit status of 1, #+ and the positional parameters themselves do not change. # This means possibly getting stuck in an endless loop. . . . # For example: # until [ -z "$1" ] # do # echo -n "$1 " # shift 20 # If less than 20 pos params, # done #+ then loop never ends! # # When in doubt, add a sanity check. . . . # shift 20 || break # ^^^^^^^^ The shift command works in a similar fashion on parameters passed to a function. See Example 33-16. Chapter 4. Introduction to Variables and Parameters 39
- 46. Chapter 5. Quoting Quoting means just that, bracketing a string in quotes. This has the effect of protecting special characters in the string from reinterpretation or expansion by the shell or shell script. (A character is "special" if it has an interpretation other than its literal meaning. For example, the asterisk * represents a wild card character in globbing and Regular Expressions). bash$ ls -l [Vv]* -rw-rw-r-- 1 bozo bozo 324 Apr 2 15:05 VIEWDATA.BAT -rw-rw-r-- 1 bozo bozo 507 May 4 14:25 vartrace.sh -rw-rw-r-- 1 bozo bozo 539 Apr 14 17:11 viewdata.sh bash$ ls -l '[Vv]*' ls: [Vv]*: No such file or directory In everyday speech or writing, when we "quote" a phrase, we set it apart and give it special meaning. In a Bash script, when we quote a string, we set it apart and protect its literal meaning. Certain programs and utilities reinterpret or expand special characters in a quoted string. An important use of quoting is protecting a command-line parameter from the shell, but still letting the calling program expand it. bash$ grep '[Ff]irst' *.txt file1.txt:This is the first line of file1.txt. file2.txt:This is the First line of file2.txt. Note that the unquoted grep [Ff]irst *.txt works under the Bash shell. [25] Quoting can also suppress echo's "appetite" for newlines. bash$ echo $(ls -l) total 8 -rw-rw-r-- 1 bo bo 13 Aug 21 12:57 t.sh -rw-rw-r-- 1 bo bo 78 Aug 21 12:57 u.sh bash$ echo "$(ls -l)" total 8 -rw-rw-r-- 1 bo bo 13 Aug 21 12:57 t.sh -rw-rw-r-- 1 bo bo 78 Aug 21 12:57 u.sh 5.1. Quoting Variables When referencing a variable, it is generally advisable to enclose its name in double quotes. This prevents reinterpretation of all special characters within the quoted string -- except $, ` (backquote), and (escape). [26] Keeping $ as a special character within double quotes permits referencing a quoted variable ("$variable"), that is, replacing the variable with its value (see Example 4-1, above). Use double quotes to prevent word splitting. [27] An argument enclosed in double quotes presents itself as a single word, even if it contains whitespace separators. List="one two three" Chapter 5. Quoting 40
- 47. Advanced Bash-Scripting Guide for a in $List # Splits the variable in parts at whitespace. do echo "$a" done # one # two # three echo "---" for a in "$List" # Preserves whitespace in a single variable. do # ^ ^ echo "$a" done # one two three A more elaborate example: variable1="a variable containing five words" COMMAND This is $variable1 # Executes COMMAND with 7 arguments: # "This" "is" "a" "variable" "containing" "five" "words" COMMAND "This is $variable1" # Executes COMMAND with 1 argument: # "This is a variable containing five words" variable2="" # Empty. COMMAND $variable2 $variable2 $variable2 # Executes COMMAND with no arguments. COMMAND "$variable2" "$variable2" "$variable2" # Executes COMMAND with 3 empty arguments. COMMAND "$variable2 $variable2 $variable2" # Executes COMMAND with 1 argument (2 spaces). # Thanks, Stéphane Chazelas. Enclosing the arguments to an echo statement in double quotes is necessary only when word splitting or preservation of whitespace is an issue. Example 5-1. Echoing Weird Variables #!/bin/bash # weirdvars.sh: Echoing weird variables. echo var="'(]{}$"" echo $var # '(]{}$" echo "$var" # '(]{}$" Doesn't make a difference. echo IFS='' echo $var # '(] {}$" converted to space. Why? echo "$var" # '(]{}$" # Examples above supplied by Stephane Chazelas. Chapter 5. Quoting 41
- 48. Advanced Bash-Scripting Guide echo var2=""" echo $var2 # " echo "$var2" # " echo # But ... var2=""" is illegal. Why? var3='' echo "$var3" # # Strong quoting works, though. exit Single quotes (' ') operate similarly to double quotes, but do not permit referencing variables, since the special meaning of $ is turned off. Within single quotes, every special character except ' gets interpreted literally. Consider single quotes ("full quoting") to be a stricter method of quoting than double quotes ("partial quoting"). Since even the escape character () gets a literal interpretation within single quotes, trying to enclose a single quote within single quotes will not yield the expected result. echo "Why can't I write 's between single quotes" echo # The roundabout method. echo 'Why can'''t I write '"'"'s between single quotes' # |-------| |----------| |-----------------------| # Three single-quoted strings, with escaped and quoted single quotes between. # This example courtesy of Stéphane Chazelas. 5.2. Escaping Escaping is a method of quoting single characters. The escape () preceding a character tells the shell to interpret that character literally. With certain commands and utilities, such as echo and sed, escaping a character may have the opposite effect - it can toggle on a special meaning for that character. Special meanings of certain escaped characters used with echo and sed n means newline r means return t means tab v means vertical tab b means backspace a Chapter 5. Quoting 42
- 49. Advanced Bash-Scripting Guide means alert (beep or flash) 0xx translates to the octal ASCII equivalent of 0nn, where nn is a string of digits Example 5-2. Escaped Characters #!/bin/bash # escaped.sh: escaped characters echo; echo # Escaping a newline. # ------------------ echo "" echo "This will print as two lines." # This will print # as two lines. echo "This will print as one line." # This will print as one line. echo; echo echo "=============" echo "vvvv" # Prints vvvv literally. # Use the -e option with 'echo' to print escaped characters. echo "=============" echo "VERTICAL TABS" echo -e "vvvv" # Prints 4 vertical tabs. echo "==============" echo "QUOTATION MARK" echo -e "042" # Prints " (quote, octal ASCII character 42). echo "==============" # The $'X' construct makes the -e option unnecessary. echo; echo "NEWLINE AND BEEP" echo $'n' # Newline. echo $'a' # Alert (beep). echo "===============" echo "QUOTATION MARKS" # Version 2 and later of Bash permits using the $'nnn' construct. # Note that in this case, 'nnn' is an octal value. echo $'t 042 t' # Quote (") framed by tabs. # It also works with hexadecimal values, in an $'xhhh' construct. echo $'t x22 t' # Quote (") framed by tabs. # Thank you, Greg Keraunen, for pointing this out. # Earlier Bash versions allowed 'x022'. echo "===============" echo Chapter 5. Quoting 43
- 50. Advanced Bash-Scripting Guide # Assigning ASCII characters to a variable. # ---------------------------------------- quote=$'042' # " assigned to a variable. echo "$quote This is a quoted string, $quote and this lies outside the quotes." echo # Concatenating ASCII chars in a variable. triple_underline=$'137137137' # 137 is octal ASCII code for '_'. echo "$triple_underline UNDERLINE $triple_underline" echo ABC=$'101102103010' # 101, 102, 103 are octal A, B, C. echo $ABC echo; echo escape=$'033' # 033 is octal for escape. echo ""escape" echoes as $escape" # no visible output. echo; echo exit 0 See Example 34-1 for another example of the $' ... ' string-expansion construct. " gives the quote its literal meaning echo "Hello" # Hello echo ""Hello" ... he said." # "Hello" ... he said. $ gives the dollar sign its literal meaning (variable name following $ will not be referenced) echo "$variable01" # $variable01 echo "The book cost $7.98." # The book cost $7.98. gives the backslash its literal meaning echo "" # Results in # Whereas . . . echo "" # Invokes secondary prompt from the command-line. # In a script, gives an error message. # However . . . echo '' # Results in The behavior of depends on whether it is escaped, strong-quoted, weak-quoted, or appearing within command substitution or a here document. Chapter 5. Quoting 44
- 51. Advanced Bash-Scripting Guide # Simple escaping and quoting echo z # z echo z # z echo 'z' # z echo 'z' # z echo "z" # z echo "z" # z # Command substitution echo `echo z` # z echo `echo z` # z echo `echo z` # z echo `echo z` # z echo `echo z` # z echo `echo z` # z echo `echo "z"` # z echo `echo "z"` # z # Here document cat <<EOF z EOF # z cat <<EOF z EOF # z # These examples supplied by Stéphane Chazelas. Elements of a string assigned to a variable may be escaped, but the escape character alone may not be assigned to a variable. variable= echo "$variable" # Will not work - gives an error message: # test.sh: : command not found # A "naked" escape cannot safely be assigned to a variable. # # What actually happens here is that the "" escapes the newline and #+ the effect is variable=echo "$variable" #+ invalid variable assignment variable= 23skidoo echo "$variable" # 23skidoo # This works, since the second line #+ is a valid variable assignment. variable= # ^ escape followed by space echo "$variable" # space variable= echo "$variable" # variable= echo "$variable" # Will not work - gives an error message: # test.sh: : command not found # # First escape escapes second one, but the third one is left "naked", #+ with same result as first instance, above. Chapter 5. Quoting 45
- 52. Advanced Bash-Scripting Guide variable= echo "$variable" # # Second and fourth escapes escaped. # This is o.k. Escaping a space can prevent word splitting in a command's argument list. file_list="/bin/cat /bin/gzip /bin/more /usr/bin/less /usr/bin/emacs-20.7" # List of files as argument(s) to a command. # Add two files to the list, and list all. ls -l /usr/X11R6/bin/xsetroot /sbin/dump $file_list echo "-------------------------------------------------------------------------" # What happens if we escape a couple of spaces? ls -l /usr/X11R6/bin/xsetroot /sbin/dump $file_list # Error: the first three files concatenated into a single argument to 'ls -l' # because the two escaped spaces prevent argument (word) splitting. The escape also provides a means of writing a multi-line command. Normally, each separate line constitutes a different command, but an escape at the end of a line escapes the newline character, and the command sequence continues on to the next line. (cd /source/directory && tar cf - . ) | (cd /dest/directory && tar xpvf -) # Repeating Alan Cox's directory tree copy command, # but split into two lines for increased legibility. # As an alternative: tar cf - -C /source/directory . | tar xpvf - -C /dest/directory # See note below. # (Thanks, Stéphane Chazelas.) If a script line ends with a |, a pipe character, then a , an escape, is not strictly necessary. It is, however, good programming practice to always escape the end of a line of code that continues to the following line. echo "foo bar" #foo #bar echo echo 'foo bar' # No difference yet. #foo #bar echo echo foo bar # Newline escaped. #foobar echo Chapter 5. Quoting 46
- 53. Advanced Bash-Scripting Guide echo "foo bar" # Same here, as still interpreted as escape within weak quotes. #foobar echo echo 'foo bar' # Escape character taken literally because of strong quoting. #foo #bar # Examples suggested by Stéphane Chazelas. Chapter 5. Quoting 47
- 54. Chapter 6. Exit and Exit Status ... there are dark corners in the Bourne shell, and people use all of them. --Chet Ramey The exit command terminates a script, just as in a C program. It can also return a value, which is available to the script's parent process. Every command returns an exit status (sometimes referred to as a return status or exit code). A successful command returns a 0, while an unsuccessful one returns a non-zero value that usually can be interpreted as an error code. Well-behaved UNIX commands, programs, and utilities return a 0 exit code upon successful completion, though there are some exceptions. Likewise, functions within a script and the script itself return an exit status. The last command executed in the function or script determines the exit status. Within a script, an exit nnn command may be used to deliver an nnn exit status to the shell (nnn must be an integer in the 0 - 255 range). When a script ends with an exit that has no parameter, the exit status of the script is the exit status of the last command executed in the script (previous to the exit). #!/bin/bash COMMAND_1 . . . COMMAND_LAST # Will exit with status of last command. exit The equivalent of a bare exit is exit $? or even just omitting the exit. #!/bin/bash COMMAND_1 . . . COMMAND_LAST # Will exit with status of last command. exit $? #!/bin/bash COMMAND1 . . . COMMAND_LAST Chapter 6. Exit and Exit Status 48
- 55. Advanced Bash-Scripting Guide # Will exit with status of last command. $? reads the exit status of the last command executed. After a function returns, $? gives the exit status of the last command executed in the function. This is Bash's way of giving functions a "return value." [28] Following the execution of a pipe, a $? gives the exit status of the last command executed. After a script terminates, a $? from the command-line gives the exit status of the script, that is, the last command executed in the script, which is, by convention, 0 on success or an integer in the range 1 - 255 on error. Example 6-1. exit / exit status #!/bin/bash echo hello echo $? # Exit status 0 returned because command executed successfully. lskdf # Unrecognized command. echo $? # Non-zero exit status returned because command failed to execute. echo exit 113 # Will return 113 to shell. # To verify this, type "echo $?" after script terminates. # By convention, an 'exit 0' indicates success, #+ while a non-zero exit value means an error or anomalous condition. $? is especially useful for testing the result of a command in a script (see Example 15-35 and Example 15-20). The !, the logical not qualifier, reverses the outcome of a test or command, and this affects its exit status. Example 6-2. Negating a condition using ! true # The "true" builtin. echo "exit status of "true" = $?" # 0 ! true echo "exit status of "! true" = $?" # 1 # Note that the "!" needs a space between it and the command. # !true leads to a "command not found" error # # The '!' operator prefixing a command invokes the Bash history mechanism. true !true # No error this time, but no negation either. # It just repeats the previous command (true). # =========================================================== # # Preceding a _pipe_ with ! inverts the exit status returned. ls | bogus_command # bash: bogus_command: command not found echo $? # 127 ! ls | bogus_command # bash: bogus_command: command not found Chapter 6. Exit and Exit Status 49
- 56. Advanced Bash-Scripting Guide echo $? # 0 # Note that the ! does not change the execution of the pipe. # Only the exit status changes. # =========================================================== # # Thanks, Stéphane Chazelas and Kristopher Newsome. Certain exit status codes have reserved meanings and should not be user-specified in a script. Chapter 6. Exit and Exit Status 50
- 57. Chapter 7. Tests Every reasonably complete programming language can test for a condition, then act according to the result of the test. Bash has the test command, various bracket and parenthesis operators, and the if/then construct. 7.1. Test Constructs • An if/then construct tests whether the exit status of a list of commands is 0 (since 0 means "success" by UNIX convention), and if so, executes one or more commands. • There exists a dedicated command called [ (left bracket special character). It is a synonym for test, and a builtin for efficiency reasons. This command considers its arguments as comparison expressions or file tests and returns an exit status corresponding to the result of the comparison (0 for true, 1 for false). • With version 2.02, Bash introduced the [[ ... ]] extended test command, which performs comparisons in a manner more familiar to programmers from other languages. Note that [[ is a keyword, not a command. Bash sees [[ $a -lt $b ]] as a single element, which returns an exit status. • The (( ... )) and let ... constructs also return an exit status, according to whether the arithmetic expressions they evaluate expand to a non-zero value. These arithmetic-expansion constructs may therefore be used to perform arithmetic comparisons. (( 0 && 1 )) # Logical AND echo $? # 1 *** # And so ... let "num = (( 0 && 1 ))" echo $num # 0 # But ... let "num = (( 0 && 1 ))" echo $? # 1 *** (( 200 || 11 )) # Logical OR echo $? # 0 *** # ... let "num = (( 200 || 11 ))" echo $num # 1 let "num = (( 200 || 11 ))" echo $? # 0 *** (( 200 | 11 )) # Bitwise OR echo $? # 0 *** # ... let "num = (( 200 | 11 ))" echo $num # 203 let "num = (( 200 | 11 ))" echo $? # 0 *** # The "let" construct returns the same exit status #+ as the double-parentheses arithmetic expansion. Chapter 7. Tests 51
- 58. Advanced Bash-Scripting Guide • An if can test any command, not just conditions enclosed within brackets. if cmp a b &> /dev/null # Suppress output. then echo "Files a and b are identical." else echo "Files a and b differ." fi # The very useful "if-grep" construct: # ----------------------------------- if grep -q Bash file then echo "File contains at least one occurrence of Bash." fi word=Linux letter_sequence=inu if echo "$word" | grep -q "$letter_sequence" # The "-q" option to grep suppresses output. then echo "$letter_sequence found in $word" else echo "$letter_sequence not found in $word" fi if COMMAND_WHOSE_EXIT_STATUS_IS_0_UNLESS_ERROR_OCCURRED then echo "Command succeeded." else echo "Command failed." fi • These last two examples courtesy of Stéphane Chazelas. Example 7-1. What is truth? #!/bin/bash # Tip: # If you're unsure of how a certain condition would evaluate, #+ test it in an if-test. echo echo "Testing "0"" if [ 0 ] # zero then echo "0 is true." else # Or else ... echo "0 is false." fi # 0 is true. echo echo "Testing "1"" if [ 1 ] # one then echo "1 is true." else echo "1 is false." fi # 1 is true. echo Chapter 7. Tests 52
- 59. Advanced Bash-Scripting Guide echo "Testing "-1"" if [ -1 ] # minus one then echo "-1 is true." else echo "-1 is false." fi # -1 is true. echo echo "Testing "NULL"" if [ ] # NULL (empty condition) then echo "NULL is true." else echo "NULL is false." fi # NULL is false. echo echo "Testing "xyz"" if [ xyz ] # string then echo "Random string is true." else echo "Random string is false." fi # Random string is true. echo echo "Testing "$xyz"" if [ $xyz ] # Tests if $xyz is null, but... # it's only an uninitialized variable. then echo "Uninitialized variable is true." else echo "Uninitialized variable is false." fi # Uninitialized variable is false. echo echo "Testing "-n $xyz"" if [ -n "$xyz" ] # More pedantically correct. then echo "Uninitialized variable is true." else echo "Uninitialized variable is false." fi # Uninitialized variable is false. echo xyz= # Initialized, but set to null value. echo "Testing "-n $xyz"" if [ -n "$xyz" ] then echo "Null variable is true." else echo "Null variable is false." fi # Null variable is false. Chapter 7. Tests 53
- 60. Advanced Bash-Scripting Guide echo # When is "false" true? echo "Testing "false"" if [ "false" ] # It seems that "false" is just a string. then echo ""false" is true." #+ and it tests true. else echo ""false" is false." fi # "false" is true. echo echo "Testing "$false"" # Again, uninitialized variable. if [ "$false" ] then echo ""$false" is true." else echo ""$false" is false." fi # "$false" is false. # Now, we get the expected result. # What would happen if we tested the uninitialized variable "$true"? echo exit 0 Exercise. Explain the behavior of Example 7-1, above. if [ condition-true ] then command 1 command 2 ... else # Or else ... # Adds default code block executing if original condition tests false. command 3 command 4 ... fi When if and then are on same line in a condition test, a semicolon must terminate the if statement. Both if and then are keywords. Keywords (or commands) begin statements, and before a new statement on the same line begins, the old one must terminate. if [ -x "$filename" ]; then Else if and elif elif elif is a contraction for else if. The effect is to nest an inner if/then construct within an outer one. Chapter 7. Tests 54
- 61. Advanced Bash-Scripting Guide if [ condition1 ] then command1 command2 command3 elif [ condition2 ] # Same as else if then command4 command5 else default-command fi The if test condition-true construct is the exact equivalent of if [ condition-true ]. As it happens, the left bracket, [ , is a token [29] which invokes the test command. The closing right bracket, ] , in an if/test should not therefore be strictly necessary, however newer versions of Bash require it. The test command is a Bash builtin which tests file types and compares strings. Therefore, in a Bash script, test does not call the external /usr/bin/test binary, which is part of the sh-utils package. Likewise, [ does not call /usr/bin/[, which is linked to /usr/bin/test. bash$ type test test is a shell builtin bash$ type '[' [ is a shell builtin bash$ type '[[' [[ is a shell keyword bash$ type ']]' ]] is a shell keyword bash$ type ']' bash: type: ]: not found If, for some reason, you wish to use /usr/bin/test in a Bash script, then specify it by full pathname. Example 7-2. Equivalence of test, /usr/bin/test, [ ], and /usr/bin/[ #!/bin/bash echo if test -z "$1" then echo "No command-line arguments." else echo "First command-line argument is $1." fi echo if /usr/bin/test -z "$1" # Equivalent to "test" builtin. # ^^^^^^^^^^^^^ # Specifying full pathname. then echo "No command-line arguments." else Chapter 7. Tests 55
- 62. Advanced Bash-Scripting Guide echo "First command-line argument is $1." fi echo if [ -z "$1" ] # Functionally identical to above code blocks. # if [ -z "$1" should work, but... #+ Bash responds to a missing close-bracket with an error message. then echo "No command-line arguments." else echo "First command-line argument is $1." fi echo if /usr/bin/[ -z "$1" ] # Again, functionally identical to above. # if /usr/bin/[ -z "$1" # Works, but gives an error message. # # Note: # This has been fixed in Bash, version 3.x. then echo "No command-line arguments." else echo "First command-line argument is $1." fi echo exit 0 The [[ ]] construct is the more versatile Bash version of [ ]. This is the extended test command, adopted from ksh88. *** No filename expansion or word splitting takes place between [[ and ]], but there is parameter expansion and command substitution. file=/etc/passwd if [[ -e $file ]] then echo "Password file exists." fi Using the [[ ... ]] test construct, rather than [ ... ] can prevent many logic errors in scripts. For example, the &&, ||, <, and > operators work within a [[ ]] test, despite giving an error within a [ ] construct. Arithmetic evaluation of octal / hexadecimal constants takes place automatically within a [[ ... ]] construct. # [[ Octal and hexadecimal evaluation ]] # Thank you, Moritz Gronbach, for pointing this out. decimal=15 octal=017 # = 15 (decimal) Chapter 7. Tests 56
- 63. Advanced Bash-Scripting Guide hex=0x0f # = 15 (decimal) if [ "$decimal" -eq "$octal" ] then echo "$decimal equals $octal" else echo "$decimal is not equal to $octal" # 15 is not equal to 017 fi # Doesn't evaluate within [ single brackets ]! if [[ "$decimal" -eq "$octal" ]] then echo "$decimal equals $octal" # 15 equals 017 else echo "$decimal is not equal to $octal" fi # Evaluates within [[ double brackets ]]! if [[ "$decimal" -eq "$hex" ]] then echo "$decimal equals $hex" # 15 equals 0x0f else echo "$decimal is not equal to $hex" fi # [[ $hexadecimal ]] also evaluates! Following an if, neither the test command nor the test brackets ( [ ] or [[ ]] ) are strictly necessary. dir=/home/bozo if cd "$dir" 2>/dev/null; then # "2>/dev/null" hides error message. echo "Now in $dir." else echo "Can't change to $dir." fi The "if COMMAND" construct returns the exit status of COMMAND. Similarly, a condition within test brackets may stand alone without an if, when used in combination with a list construct. var1=20 var2=22 [ "$var1" -ne "$var2" ] && echo "$var1 is not equal to $var2" home=/home/bozo [ -d "$home" ] || echo "$home directory does not exist." The (( )) construct expands and evaluates an arithmetic expression. If the expression evaluates as zero, it returns an exit status of 1, or "false". A non-zero expression returns an exit status of 0, or "true". This is in marked contrast to using the test and [ ] constructs previously discussed. Example 7-3. Arithmetic Tests using (( )) #!/bin/bash # Arithmetic tests. # The (( ... )) construct evaluates and tests numerical expressions. # Exit status opposite from [ ... ] construct! Chapter 7. Tests 57
- 64. Advanced Bash-Scripting Guide (( 0 )) echo "Exit status of "(( 0 ))" is $?." # 1 (( 1 )) echo "Exit status of "(( 1 ))" is $?." # 0 (( 5 > 4 )) # true echo "Exit status of "(( 5 > 4 ))" is $?." # 0 (( 5 > 9 )) # false echo "Exit status of "(( 5 > 9 ))" is $?." # 1 (( 5 - 5 )) # 0 echo "Exit status of "(( 5 - 5 ))" is $?." # 1 (( 5 / 4 )) # Division o.k. echo "Exit status of "(( 5 / 4 ))" is $?." # 0 (( 1 / 2 )) # Division result < 1. echo "Exit status of "(( 1 / 2 ))" is $?." # Rounded off to 0. # 1 (( 1 / 0 )) 2>/dev/null # Illegal division by 0. # ^^^^^^^^^^^ echo "Exit status of "(( 1 / 0 ))" is $?." # 1 # What effect does the "2>/dev/null" have? # What would happen if it were removed? # Try removing it, then rerunning the script. # ======================================= # # (( ... )) also useful in an if-then test. var1=5 var2=4 if (( var1 > var2 )) then #^ ^ Note: Not $var1, $var2. Why? echo "$var1 is greater than $var2" fi # 5 is greater than 4 exit 0 7.2. File test operators Returns true if... -e file exists -a file exists This is identical in effect to -e. It has been "deprecated," [30] and its use is discouraged. -f file is a regular file (not a directory or device file) -s file is not zero size Chapter 7. Tests 58
- 65. Advanced Bash-Scripting Guide -d file is a directory -b file is a block device -c file is a character device device0="/dev/sda2" # / (root directory) if [ -b "$device0" ] then echo "$device0 is a block device." fi # /dev/sda2 is a block device. device1="/dev/ttyS1" # PCMCIA modem card. if [ -c "$device1" ] then echo "$device1 is a character device." fi # /dev/ttyS1 is a character device. -p file is a pipe -h file is a symbolic link -L file is a symbolic link -S file is a socket -t file (descriptor) is associated with a terminal device This test option may be used to check whether the stdin [ -t 0 ] or stdout [ -t 1 ] in a given script is a terminal. -r file has read permission (for the user running the test) -w file has write permission (for the user running the test) -x file has execute permission (for the user running the test) -g set-group-id (sgid) flag set on file or directory If a directory has the sgid flag set, then a file created within that directory belongs to the group that owns the directory, not necessarily to the group of the user who created the file. This may be useful for a directory shared by a workgroup. -u set-user-id (suid) flag set on file Chapter 7. Tests 59
- 66. Advanced Bash-Scripting Guide A binary owned by root with set-user-id flag set runs with root privileges, even when an ordinary user invokes it. [31] This is useful for executables (such as pppd and cdrecord) that need to access system hardware. Lacking the suid flag, these binaries could not be invoked by a non-root user. -rwsr-xr-t 1 root 178236 Oct 2 2000 /usr/sbin/pppd A file with the suid flag set shows an s in its permissions. -k sticky bit set Commonly known as the sticky bit, the save-text-mode flag is a special type of file permission. If a file has this flag set, that file will be kept in cache memory, for quicker access. [32] If set on a directory, it restricts write permission. Setting the sticky bit adds a t to the permissions on the file or directory listing. drwxrwxrwt 7 root 1024 May 19 21:26 tmp/ If a user does not own a directory that has the sticky bit set, but has write permission in that directory, she can only delete those files that she owns in it. This keeps users from inadvertently overwriting or deleting each other's files in a publicly accessible directory, such as /tmp. (The owner of the directory or root can, of course, delete or rename files there.) -O you are owner of file -G group-id of file same as yours -N file modified since it was last read f1 -nt f2 file f1 is newer than f2 f1 -ot f2 file f1 is older than f2 f1 -ef f2 files f1 and f2 are hard links to the same file ! "not" -- reverses the sense of the tests above (returns true if condition absent). Example 7-4. Testing for broken links #!/bin/bash # broken-link.sh # Written by Lee bigelow <ligelowbee@yahoo.com> # Used in ABS Guide with permission. # A pure shell script to find dead symlinks and output them quoted #+ so they can be fed to xargs and dealt with :) #+ eg. sh broken-link.sh /somedir /someotherdir|xargs rm # # This, however, is a better method: # # find "somedir" -type l -print0| # xargs -r0 file| Chapter 7. Tests 60
- 67. Advanced Bash-Scripting Guide # grep "broken symbolic"| # sed -e 's/^|: *broken symbolic.*$/"/g' # #+ but that wouldn't be pure Bash, now would it. # Caution: beware the /proc file system and any circular links! ################################################################ # If no args are passed to the script set directories-to-search #+ to current directory. Otherwise set the directories-to-search #+ to the args passed. ###################### [ $# -eq 0 ] && directorys=`pwd` || directorys=$@ # Setup the function linkchk to check the directory it is passed #+ for files that are links and don't exist, then print them quoted. # If one of the elements in the directory is a subdirectory then #+ send that subdirectory to the linkcheck function. ########## linkchk () { for element in $1/*; do [ -h "$element" -a ! -e "$element" ] && echo "$element" [ -d "$element" ] && linkchk $element # Of course, '-h' tests for symbolic link, '-d' for directory. done } # Send each arg that was passed to the script to the linkchk() function #+ if it is a valid directoy. If not, then print the error message #+ and usage info. ################## for directory in $directorys; do if [ -d $directory ] then linkchk $directory else echo "$directory is not a directory" echo "Usage: $0 dir1 dir2 ..." fi done exit $? Example 28-1, Example 10-7, Example 10-3, Example 28-3, and Example A-1 also illustrate uses of the file test operators. 7.3. Other Comparison Operators A binary comparison operator compares two variables or quantities. Note that integer and string comparison use a different set of operators. integer comparison -eq is equal to if [ "$a" -eq "$b" ] Chapter 7. Tests 61
- 68. Advanced Bash-Scripting Guide -ne is not equal to if [ "$a" -ne "$b" ] -gt is greater than if [ "$a" -gt "$b" ] -ge is greater than or equal to if [ "$a" -ge "$b" ] -lt is less than if [ "$a" -lt "$b" ] -le is less than or equal to if [ "$a" -le "$b" ] < is less than (within double parentheses) (("$a" < "$b")) <= is less than or equal to (within double parentheses) (("$a" <= "$b")) > is greater than (within double parentheses) (("$a" > "$b")) >= is greater than or equal to (within double parentheses) (("$a" >= "$b")) string comparison = is equal to if [ "$a" = "$b" ] == is equal to if [ "$a" == "$b" ] This is a synonym for =. Chapter 7. Tests 62
- 69. Advanced Bash-Scripting Guide The == comparison operator behaves differently within a double-brackets test than within single brackets. [[ $a == z* ]] # True if $a starts with an "z" (regex pattern matching). [[ $a == "z*" ]] # True if $a is equal to z* (literal matching). [ $a == z* ] # File globbing and word splitting take place. [ "$a" == "z*" ] # True if $a is equal to z* (literal matching). # Thanks, Stéphane Chazelas != is not equal to if [ "$a" != "$b" ] This operator uses pattern matching within a [[ ... ]] construct. < is less than, in ASCII alphabetical order if [[ "$a" < "$b" ]] if [ "$a" < "$b" ] Note that the "<" needs to be escaped within a [ ] construct. > is greater than, in ASCII alphabetical order if [[ "$a" > "$b" ]] if [ "$a" > "$b" ] Note that the ">" needs to be escaped within a [ ] construct. See Example 26-11 for an application of this comparison operator. -z string is null, that is, has zero length String='' # Zero-length ("null") string variable. if [ -z "$String" ] then echo "$String is null." else echo "$String is NOT null." fi # $String is null. -n string is not null. The -n test requires that the string be quoted within the test brackets. Using an unquoted string with ! -z, or even just the unquoted string alone within test brackets (see Example 7-6) normally works, however, this is an unsafe practice. Always quote a tested string. [33] Chapter 7. Tests 63
- 70. Advanced Bash-Scripting Guide Example 7-5. Arithmetic and string comparisons #!/bin/bash a=4 b=5 # Here "a" and "b" can be treated either as integers or strings. # There is some blurring between the arithmetic and string comparisons, #+ since Bash variables are not strongly typed. # Bash permits integer operations and comparisons on variables #+ whose value consists of all-integer characters. # Caution advised, however. echo if [ "$a" -ne "$b" ] then echo "$a is not equal to $b" echo "(arithmetic comparison)" fi echo if [ "$a" != "$b" ] then echo "$a is not equal to $b." echo "(string comparison)" # "4" != "5" # ASCII 52 != ASCII 53 fi # In this particular instance, both "-ne" and "!=" work. echo exit 0 Example 7-6. Testing whether a string is null #!/bin/bash # str-test.sh: Testing null strings and unquoted strings, #+ but not strings and sealing wax, not to mention cabbages and kings . . . # Using if [ ... ] # If a string has not been initialized, it has no defined value. # This state is called "null" (not the same as zero!). if [ -n $string1 ] # string1 has not been declared or initialized. then echo "String "string1" is not null." else echo "String "string1" is null." fi # Wrong result. # Shows $string1 as not null, although it was not initialized. echo # Let's try it again. Chapter 7. Tests 64
- 71. Advanced Bash-Scripting Guide if [ -n "$string1" ] # This time, $string1 is quoted. then echo "String "string1" is not null." else echo "String "string1" is null." fi # Quote strings within test brackets! echo if [ $string1 ] # This time, $string1 stands naked. then echo "String "string1" is not null." else echo "String "string1" is null." fi # This works fine. # The [ ... ] test operator alone detects whether the string is null. # However it is good practice to quote it (if [ "$string1" ]). # # As Stephane Chazelas points out, # if [ $string1 ] has one argument, "]" # if [ "$string1" ] has two arguments, the empty "$string1" and "]" echo string1=initialized if [ $string1 ] # Again, $string1 stands unquoted. then echo "String "string1" is not null." else echo "String "string1" is null." fi # Again, gives correct result. # Still, it is better to quote it ("$string1"), because . . . string1="a = b" if [ $string1 ] # Again, $string1 stands unquoted. then echo "String "string1" is not null." else echo "String "string1" is null." fi # Not quoting "$string1" now gives wrong result! exit 0 # Thank you, also, Florian Wisser, for the "heads-up". Example 7-7. zmore #!/bin/bash # zmore # View gzipped files with 'more' filter. E_NOARGS=65 E_NOTFOUND=66 E_NOTGZIP=67 if [ $# -eq 0 ] # same effect as: if [ -z "$1" ] Chapter 7. Tests 65
- 72. Advanced Bash-Scripting Guide # $1 can exist, but be empty: zmore "" arg2 arg3 then echo "Usage: `basename $0` filename" >&2 # Error message to stderr. exit $E_NOARGS # Returns 65 as exit status of script (error code). fi filename=$1 if [ ! -f "$filename" ] # Quoting $filename allows for possible spaces. then echo "File $filename not found!" >&2 # Error message to stderr. exit $E_NOTFOUND fi if [ ${filename##*.} != "gz" ] # Using bracket in variable substitution. then echo "File $1 is not a gzipped file!" exit $E_NOTGZIP fi zcat $1 | more # Uses the 'more' filter. # May substitute 'less' if desired. exit $? # Script returns exit status of pipe. # Actually "exit $?" is unnecessary, as the script will, in any case, #+ return the exit status of the last command executed. compound comparison -a logical and exp1 -a exp2 returns true if both exp1 and exp2 are true. -o logical or exp1 -o exp2 returns true if either exp1 or exp2 is true. These are similar to the Bash comparison operators && and ||, used within double brackets. [[ condition1 && condition2 ]] The -o and -a operators work with the test command or occur within single test brackets. if [ "$expr1" -a "$expr2" ] then echo "Both expr1 and expr2 are true." else echo "Either expr1 or expr2 is false." fi But, as rihad points out: Chapter 7. Tests 66
- 73. Advanced Bash-Scripting Guide [ 1 -eq 1 ] && [ -n "`echo true 1>&2`" ] # true [ 1 -eq 2 ] && [ -n "`echo true 1>&2`" ] # (no output) # ^^^^^^^ False condition. So far, everything as expected. # However ... [ 1 -eq 2 -a -n "`echo true 1>&2`" ] # true # ^^^^^^^ False condition. So, why "true" output? # Is it because both condition clauses within brackets evaluate? [[ 1 -eq 2 && -n "`echo true 1>&2`" ]] # (no output) # No, that's not it. # Apparently && and || "short-circuit" while -a and -o do not. Refer to Example 8-3, Example 26-17, and Example A-29 to see compound comparison operators in action. 7.4. Nested if/then Condition Tests Condition tests using the if/then construct may be nested. The net result is equivalent to using the && compound comparison operator. a=3 if [ "$a" -gt 0 ] then if [ "$a" -lt 5 ] then echo "The value of "a" lies somewhere between 0 and 5." fi fi # Same result as: if [ "$a" -gt 0 ] && [ "$a" -lt 5 ] then echo "The value of "a" lies somewhere between 0 and 5." fi Example 34-4 demonstrates a nested if/then condition test. 7.5. Testing Your Knowledge of Tests The systemwide xinitrc file can be used to launch the X server. This file contains quite a number of if/then tests. The following is excerpted from an "ancient" version of xinitrc (Red Hat 7.1, or thereabouts). if [ -f $HOME/.Xclients ]; then exec $HOME/.Xclients elif [ -f /etc/X11/xinit/Xclients ]; then exec /etc/X11/xinit/Xclients else # failsafe settings. Although we should never get here # (we provide fallbacks in Xclients as well) it can't hurt. xclock -geometry 100x100-5+5 & xterm -geometry 80x50-50+150 & if [ -f /usr/bin/netscape -a -f /usr/share/doc/HTML/index.html ]; then netscape /usr/share/doc/HTML/index.html & fi fi Chapter 7. Tests 67
- 74. Advanced Bash-Scripting Guide Explain the test constructs in the above snippet, then examine an updated version of the file, /etc/X11/xinit/xinitrc, and analyze the if/then test constructs there. You may need to refer ahead to the discussions of grep, sed, and regular expressions. Chapter 7. Tests 68
- 75. Chapter 8. Operations and Related Topics 8.1. Operators assignment variable assignment Initializing or changing the value of a variable = All-purpose assignment operator, which works for both arithmetic and string assignments. var=27 category=minerals # No spaces allowed after the "=". Do not confuse the "=" assignment operator with the = test operator. # = as a test operator if [ "$string1" = "$string2" ] then command fi # if [ "X$string1" = "X$string2" ] is safer, #+ to prevent an error message should one of the variables be empty. # (The prepended "X" characters cancel out.) arithmetic operators + plus - minus * multiplication / division ** exponentiation # Bash, version 2.02, introduced the "**" exponentiation operator. let "z=5**3" # 5 * 5 * 5 echo "z = $z" # z = 125 % modulo, or mod (returns the remainder of an integer division operation) bash$ expr 5 % 3 2 5/3 = 1, with remainder 2 Chapter 8. Operations and Related Topics 69
- 76. Advanced Bash-Scripting Guide This operator finds use in, among other things, generating numbers within a specific range (see Example 9-26 and Example 9-30) and formatting program output (see Example 26-16 and Example A-6). It can even be used to generate prime numbers, (see Example A-15). Modulo turns up surprisingly often in numerical recipes. Example 8-1. Greatest common divisor #!/bin/bash # gcd.sh: greatest common divisor # Uses Euclid's algorithm # The "greatest common divisor" (gcd) of two integers #+ is the largest integer that will divide both, leaving no remainder. # Euclid's algorithm uses successive division. # In each pass, #+ dividend <--- divisor #+ divisor <--- remainder #+ until remainder = 0. # The gcd = dividend, on the final pass. # # For an excellent discussion of Euclid's algorithm, see #+ Jim Loy's site, http://www.jimloy.com/number/euclids.htm. # ------------------------------------------------------ # Argument check ARGS=2 E_BADARGS=85 if [ $# -ne "$ARGS" ] then echo "Usage: `basename $0` first-number second-number" exit $E_BADARGS fi # ------------------------------------------------------ gcd () { dividend=$1 # Arbitrary assignment. divisor=$2 #! It doesn't matter which of the two is larger. # Why not? remainder=1 # If an uninitialized variable is used inside #+ test brackets, an error message results. until [ "$remainder" -eq 0 ] do # ^^^^^^^^^^ Must be previously initialized! let "remainder = $dividend % $divisor" dividend=$divisor # Now repeat with 2 smallest numbers. divisor=$remainder done # Euclid's algorithm } # Last $dividend is the gcd. gcd $1 $2 Chapter 8. Operations and Related Topics 70
- 77. Advanced Bash-Scripting Guide echo; echo "GCD of $1 and $2 = $dividend"; echo # Exercises : # --------- # 1) Check command-line arguments to make sure they are integers, #+ and exit the script with an appropriate error message if not. # 2) Rewrite the gcd () function to use local variables. exit 0 += plus-equal (increment variable by a constant) let "var += 5" results in var being incremented by 5. -= minus-equal (decrement variable by a constant) *= times-equal (multiply variable by a constant) let "var *= 4" results in var being multiplied by 4. /= slash-equal (divide variable by a constant) %= mod-equal (remainder of dividing variable by a constant) Arithmetic operators often occur in an expr or let expression. Example 8-2. Using Arithmetic Operations #!/bin/bash # Counting to 11 in 10 different ways. n=1; echo -n "$n " let "n = $n + 1" # let "n = n + 1" also works. echo -n "$n " : $((n = $n + 1)) # ":" necessary because otherwise Bash attempts #+ to interpret "$((n = $n + 1))" as a command. echo -n "$n " (( n = n + 1 )) # A simpler alternative to the method above. # Thanks, David Lombard, for pointing this out. echo -n "$n " n=$(($n + 1)) echo -n "$n " : $[ n = $n + 1 ] # ":" necessary because otherwise Bash attempts #+ to interpret "$[ n = $n + 1 ]" as a command. # Works even if "n" was initialized as a string. Chapter 8. Operations and Related Topics 71
- 78. Advanced Bash-Scripting Guide echo -n "$n " n=$[ $n + 1 ] # Works even if "n" was initialized as a string. #* Avoid this type of construct, since it is obsolete and nonportable. # Thanks, Stephane Chazelas. echo -n "$n " # Now for C-style increment operators. # Thanks, Frank Wang, for pointing this out. let "n++" # let "++n" also works. echo -n "$n " (( n++ )) # (( ++n ) also works. echo -n "$n " : $(( n++ )) # : $(( ++n )) also works. echo -n "$n " : $[ n++ ] # : $[ ++n ]] also works echo -n "$n " echo exit 0 Integer variables in older versions of Bash were signed long (32-bit) integers, in the range of -2147483648 to 2147483647. An operation that took a variable outside these limits gave an erroneous result. echo $BASH_VERSION # 1.14 a=2147483646 echo "a = $a" # a = 2147483646 let "a+=1" # Increment "a". echo "a = $a" # a = 2147483647 let "a+=1" # increment "a" again, past the limit. echo "a = $a" # a = -2147483648 # ERROR: out of range, # + and the leftmost bit, the sign bit, # + has been set, making the result negative. As of version >= 2.05b, Bash supports 64-bit integers. Bash does not understand floating point arithmetic. It treats numbers containing a decimal point as strings. a=1.5 let "b = $a + 1.3" # Error. # t2.sh: let: b = 1.5 + 1.3: syntax error in expression # (error token is ".5 + 1.3") echo "b = $b" # b=1 Use bc in scripts that that need floating point calculations or math library functions. Chapter 8. Operations and Related Topics 72
- 79. Advanced Bash-Scripting Guide bitwise operators. The bitwise operators seldom make an appearance in shell scripts. Their chief use seems to be manipulating and testing values read from ports or sockets. "Bit flipping" is more relevant to compiled languages, such as C and C++, which provide direct access to system hardware. bitwise operators << bitwise left shift (multiplies by 2 for each shift position) <<= left-shift-equal let "var <<= 2" results in var left-shifted 2 bits (multiplied by 4) >> bitwise right shift (divides by 2 for each shift position) >>= right-shift-equal (inverse of <<=) & bitwise AND &= bitwise AND-equal | bitwise OR |= bitwise OR-equal ~ bitwise NOT ^ bitwise XOR ^= bitwise XOR-equal logical (boolean) operators ! NOT if [ ! -f $FILENAME ] then ... && AND if [ $condition1 ] && [ $condition2 ] # Same as: if [ $condition1 -a $condition2 ] # Returns true if both condition1 and condition2 hold true... if [[ $condition1 && $condition2 ]] # Also works. # Note that && operator not permitted inside brackets #+ of [ ... ] construct. && may also be used, depending on context, in an and list to concatenate commands. || Chapter 8. Operations and Related Topics 73
- 80. Advanced Bash-Scripting Guide OR if [ $condition1 ] || [ $condition2 ] # Same as: if [ $condition1 -o $condition2 ] # Returns true if either condition1 or condition2 holds true... if [[ $condition1 || $condition2 ]] # Also works. # Note that || operator not permitted inside brackets #+ of a [ ... ] construct. Bash tests the exit status of each statement linked with a logical operator. Example 8-3. Compound Condition Tests Using && and || #!/bin/bash a=24 b=47 if [ "$a" -eq 24 ] && [ "$b" -eq 47 ] then echo "Test #1 succeeds." else echo "Test #1 fails." fi # ERROR: if [ "$a" -eq 24 && "$b" -eq 47 ] #+ attempts to execute ' [ "$a" -eq 24 ' #+ and fails to finding matching ']'. # # Note: if [[ $a -eq 24 && $b -eq 24 ]] works. # The double-bracket if-test is more flexible #+ than the single-bracket version. # (The "&&" has a different meaning in line 17 than in line 6.) # Thanks, Stephane Chazelas, for pointing this out. if [ "$a" -eq 98 ] || [ "$b" -eq 47 ] then echo "Test #2 succeeds." else echo "Test #2 fails." fi # The -a and -o options provide #+ an alternative compound condition test. # Thanks to Patrick Callahan for pointing this out. if [ "$a" -eq 24 -a "$b" -eq 47 ] then echo "Test #3 succeeds." else echo "Test #3 fails." fi if [ "$a" -eq 98 -o "$b" -eq 47 ] then Chapter 8. Operations and Related Topics 74
- 81. Advanced Bash-Scripting Guide echo "Test #4 succeeds." else echo "Test #4 fails." fi a=rhino b=crocodile if [ "$a" = rhino ] && [ "$b" = crocodile ] then echo "Test #5 succeeds." else echo "Test #5 fails." fi exit 0 The && and || operators also find use in an arithmetic context. bash$ echo $(( 1 && 2 )) $((3 && 0)) $((4 || 0)) $((0 || 0)) 1 0 1 0 miscellaneous operators , Comma operator The comma operator chains together two or more arithmetic operations. All the operations are evaluated (with possible side effects. [34] let "t1 = ((5 + 3, 7 - 1, 15 - 4))" echo "t1 = $t1" ^^^^^^ # t1 = 11 # Here t1 is set to the result of the last operation. Why? let "t2 = ((a = 9, 15 / 3))" # Set "a" and calculate "t2". echo "t2 = $t2 a = $a" # t2 = 5 a = 9 The comma operator finds use mainly in for loops. See Example 10-12. 8.2. Numerical Constants A shell script interprets a number as decimal (base 10), unless that number has a special prefix or notation. A number preceded by a 0 is octal (base 8). A number preceded by 0x is hexadecimal (base 16). A number with an embedded # evaluates as BASE#NUMBER (with range and notational restrictions). Example 8-4. Representation of numerical constants #!/bin/bash # numbers.sh: Representation of numbers in different bases. # Decimal: the default let "dec = 32" echo "decimal number = $dec" # 32 # Nothing out of the ordinary here. Chapter 8. Operations and Related Topics 75
- 82. Advanced Bash-Scripting Guide # Octal: numbers preceded by '0' (zero) let "oct = 032" echo "octal number = $oct" # 26 # Expresses result in decimal. # --------- ------ -- ------- # Hexadecimal: numbers preceded by '0x' or '0X' let "hex = 0x32" echo "hexadecimal number = $hex" # 50 echo $((0x9abc)) # 39612 # ^^ ^^ double-parentheses arithmetic expansion/evaluation # Expresses result in decimal. # Other bases: BASE#NUMBER # BASE between 2 and 64. # NUMBER must use symbols within the BASE range, see below. let "bin = 2#111100111001101" echo "binary number = $bin" # 31181 let "b32 = 32#77" echo "base-32 number = $b32" # 231 let "b64 = 64#@_" echo "base-64 number = $b64" # 4031 # This notation only works for a limited range (2 - 64) of ASCII characters. # 10 digits + 26 lowercase characters + 26 uppercase characters + @ + _ echo echo $((36#zz)) $((2#10101010)) $((16#AF16)) $((53#1aA)) # 1295 170 44822 3375 # Important note: # -------------- # Using a digit out of range of the specified base notation #+ gives an error message. let "bad_oct = 081" # (Partial) error message output: # bad_oct = 081: value too great for base (error token is "081") # Octal numbers use only digits in the range 0 - 7. exit $? # Thanks, Rich Bartell and Stephane Chazelas, for clarification. $ sh numbers.sh $ echo $? $ 1 Chapter 8. Operations and Related Topics 76
- 83. Part 3. Beyond the Basics Table of Contents 9. Variables Revisited 9.1. Internal Variables 9.2. Manipulating Strings 9.3. Parameter Substitution 9.4. Typing variables: declare or typeset 9.5. Indirect References 9.6. $RANDOM: generate random integer 9.7. The Double-Parentheses Construct 10. Loops and Branches 10.1. Loops 10.2. Nested Loops 10.3. Loop Control 10.4. Testing and Branching 11. Command Substitution 12. Arithmetic Expansion 13. Recess Time Part 3. Beyond the Basics 77
- 84. Chapter 9. Variables Revisited Used properly, variables can add power and flexibility to scripts. This requires learning their subtleties and nuances. 9.1. Internal Variables Builtin variables: variables affecting bash script behavior $BASH The path to the Bash binary itself bash$ echo $BASH /bin/bash $BASH_ENV An environmental variable pointing to a Bash startup file to be read when a script is invoked $BASH_SUBSHELL A variable indicating the subshell level. This is a new addition to Bash, version 3. See Example 20-1 for usage. $BASHPID Process ID of the current instance of Bash. This is not the same as the $$ variable, but it often gives the same result. bash4$ echo $$ 11015 bash4$ echo $BASHPID 11015 bash4$ ps ax | grep bash4 11015 pts/2 R 0:00 bash4 But ... #!/bin/bash4 echo "$$ outside of subshell = $$" # 9602 echo "$BASH_SUBSHELL outside of subshell = $BASH_SUBSHELL" # 0 echo "$BASHPID outside of subshell = $BASHPID" # 9602 echo ( echo "$$ inside of subshell = $$" # 9602 echo "$BASH_SUBSHELL inside of subshell = $BASH_SUBSHELL" # 1 echo "$BASHPID inside of subshell = $BASHPID" ) # 9603 # Note that $$ returns PID of parent process. $BASH_VERSINFO[n] A 6-element array containing version information about the installed release of Bash. This is similar to $BASH_VERSION, below, but a bit more detailed. Chapter 9. Variables Revisited 78
- 85. Advanced Bash-Scripting Guide # Bash version info: for n in 0 1 2 3 4 5 do echo "BASH_VERSINFO[$n] = ${BASH_VERSINFO[$n]}" done # BASH_VERSINFO[0] = 3 # Major version no. # BASH_VERSINFO[1] = 00 # Minor version no. # BASH_VERSINFO[2] = 14 # Patch level. # BASH_VERSINFO[3] = 1 # Build version. # BASH_VERSINFO[4] = release # Release status. # BASH_VERSINFO[5] = i386-redhat-linux-gnu # Architecture # (same as $MACHTYPE). $BASH_VERSION The version of Bash installed on the system bash$ echo $BASH_VERSION 3.2.25(1)-release tcsh% echo $BASH_VERSION BASH_VERSION: Undefined variable. Checking $BASH_VERSION is a good method of determining which shell is running. $SHELL does not necessarily give the correct answer. $CDPATH A colon-separated list of search paths available to the cd command, similar in function to the $PATH variable for binaries. The $CDPATH variable may be set in the local ~/.bashrc file. bash$ cd bash-doc bash: cd: bash-doc: No such file or directory bash$ CDPATH=/usr/share/doc bash$ cd bash-doc /usr/share/doc/bash-doc bash$ echo $PWD /usr/share/doc/bash-doc $DIRSTACK The top value in the directory stack [35] (affected by pushd and popd) This builtin variable corresponds to the dirs command, however dirs shows the entire contents of the directory stack. $EDITOR The default editor invoked by a script, usually vi or emacs. $EUID "effective" user ID number Identification number of whatever identity the current user has assumed, perhaps by means of su. The $EUID is not necessarily the same as the $UID. Chapter 9. Variables Revisited 79
- 86. Advanced Bash-Scripting Guide $FUNCNAME Name of the current function xyz23 () { echo "$FUNCNAME now executing." # xyz23 now executing. } xyz23 echo "FUNCNAME = $FUNCNAME" # FUNCNAME = # Null value outside a function. See also Example A-50. $GLOBIGNORE A list of filename patterns to be excluded from matching in globbing. $GROUPS Groups current user belongs to This is a listing (array) of the group id numbers for current user, as recorded in /etc/passwd and /etc/group. root# echo $GROUPS 0 root# echo ${GROUPS[1]} 1 root# echo ${GROUPS[5]} 6 $HOME Home directory of the user, usually /home/username (see Example 9-16) $HOSTNAME The hostname command assigns the system host name at bootup in an init script. However, the gethostname() function sets the Bash internal variable $HOSTNAME. See also Example 9-16. $HOSTTYPE host type Like $MACHTYPE, identifies the system hardware. bash$ echo $HOSTTYPE i686 $IFS internal field separator This variable determines how Bash recognizes fields, or word boundaries, when it interprets character strings. $IFS defaults to whitespace (space, tab, and newline), but may be changed, for example, to parse a comma-separated data file. Note that $* uses the first character held in $IFS. See Example 5-1. Chapter 9. Variables Revisited 80
- 87. Advanced Bash-Scripting Guide bash$ echo "$IFS" (With $IFS set to default, a blank line displays.) bash$ echo "$IFS" | cat -vte ^I$ $ (Show whitespace: here a single space, ^I [horizontal tab], and newline, and display "$" at end-of-line.) bash$ bash -c 'set w x y z; IFS=":-;"; echo "$*"' w:x:y:z (Read commands from string and assign any arguments to pos params.) $IFS does not handle whitespace the same as it does other characters. Example 9-1. $IFS and whitespace #!/bin/bash # ifs.sh # $IFS treats whitespace differently than other characters. output_args_one_per_line() { for arg do echo "[$arg]" done # ^ ^ Embed within brackets, for your viewing pleasure. } echo; echo "IFS=" "" echo "-------" IFS=" " var=" a b c " # ^ ^^ ^^^ output_args_one_per_line $var # output_args_one_per_line `echo " a b c "` # [a] # [b] # [c] echo; echo "IFS=:" echo "-----" IFS=: var=":a::b:c:::" # Same pattern as above, # ^ ^^ ^^^ #+ but substituting ":" for " " ... output_args_one_per_line $var # [] # [a] # [] # [b] # [c] Chapter 9. Variables Revisited 81
- 88. Advanced Bash-Scripting Guide # [] # [] # Note "empty" brackets. # The same thing happens with the "FS" field separator in awk. echo exit (Many thanks, Stéphane Chazelas, for clarification and above examples.) See also Example 15-41, Example 10-7, and Example 18-14 for instructive examples of using $IFS. $IGNOREEOF Ignore EOF: how many end-of-files (control-D) the shell will ignore before logging out. $LC_COLLATE Often set in the .bashrc or /etc/profile files, this variable controls collation order in filename expansion and pattern matching. If mishandled, LC_COLLATE can cause unexpected results in filename globbing. As of version 2.05 of Bash, filename globbing no longer distinguishes between lowercase and uppercase letters in a character range between brackets. For example, ls [A-M]* would match both File1.txt and file1.txt. To revert to the customary behavior of bracket matching, set LC_COLLATE to C by an export LC_COLLATE=C in /etc/profile and/or ~/.bashrc. $LC_CTYPE This internal variable controls character interpretation in globbing and pattern matching. $LINENO This variable is the line number of the shell script in which this variable appears. It has significance only within the script in which it appears, and is chiefly useful for debugging purposes. # *** BEGIN DEBUG BLOCK *** last_cmd_arg=$_ # Save it. echo "At line number $LINENO, variable "v1" = $v1" echo "Last command argument processed = $last_cmd_arg" # *** END DEBUG BLOCK *** $MACHTYPE machine type Identifies the system hardware. bash$ echo $MACHTYPE i686 $OLDPWD Old working directory ("OLD-Print-Working-Directory", previous directory you were in). $OSTYPE operating system type bash$ echo $OSTYPE linux $PATH Path to binaries, usually /usr/bin/, /usr/X11R6/bin/, /usr/local/bin, etc. Chapter 9. Variables Revisited 82
- 89. Advanced Bash-Scripting Guide When given a command, the shell automatically does a hash table search on the directories listed in the path for the executable. The path is stored in the environmental variable, $PATH, a list of directories, separated by colons. Normally, the system stores the $PATH definition in /etc/profile and/or ~/.bashrc (see Appendix G). bash$ echo $PATH /bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin:/sbin:/usr/sbin PATH=${PATH}:/opt/bin appends the /opt/bin directory to the current path. In a script, it may be expedient to temporarily add a directory to the path in this way. When the script exits, this restores the original $PATH (a child process, such as a script, may not change the environment of the parent process, the shell). The current "working directory", ./, is usually omitted from the $PATH as a security measure. $PIPESTATUS Array variable holding exit status(es) of last executed foreground pipe. bash$ echo $PIPESTATUS 0 bash$ ls -al | bogus_command bash: bogus_command: command not found bash$ echo ${PIPESTATUS[1]} 127 bash$ ls -al | bogus_command bash: bogus_command: command not found bash$ echo $? 127 The members of the $PIPESTATUS array hold the exit status of each respective command executed in a pipe. $PIPESTATUS[0] holds the exit status of the first command in the pipe, $PIPESTATUS[1] the exit status of the second command, and so on. The $PIPESTATUS variable may contain an erroneous 0 value in a login shell (in releases prior to 3.0 of Bash). tcsh% bash bash$ who | grep nobody | sort bash$ echo ${PIPESTATUS[*]} 0 The above lines contained in a script would produce the expected 0 1 0 output. Thank you, Wayne Pollock for pointing this out and supplying the above example. The $PIPESTATUS variable gives unexpected results in some contexts. bash$ echo $BASH_VERSION 3.00.14(1)-release bash$ $ ls | bogus_command | wc Chapter 9. Variables Revisited 83
- 90. Advanced Bash-Scripting Guide bash: bogus_command: command not found 0 0 0 bash$ echo ${PIPESTATUS[@]} 141 127 0 Chet Ramey attributes the above output to the behavior of ls. If ls writes to a pipe whose output is not read, then SIGPIPE kills it, and its exit status is 141. Otherwise its exit status is 0, as expected. This likewise is the case for tr. $PIPESTATUS is a "volatile" variable. It needs to be captured immediately after the pipe in question, before any other command intervenes. bash$ $ ls | bogus_command | wc bash: bogus_command: command not found 0 0 0 bash$ echo ${PIPESTATUS[@]} 0 127 0 bash$ echo ${PIPESTATUS[@]} 0 The pipefail option may be useful in cases where $PIPESTATUS does not give the desired information. $PPID The $PPID of a process is the process ID (pid) of its parent process. [36] Compare this with the pidof command. $PROMPT_COMMAND A variable holding a command to be executed just before the primary prompt, $PS1 is to be displayed. $PS1 This is the main prompt, seen at the command-line. $PS2 The secondary prompt, seen when additional input is expected. It displays as ">". $PS3 The tertiary prompt, displayed in a select loop (see Example 10-29). $PS4 The quartenary prompt, shown at the beginning of each line of output when invoking a script with the -x option. It displays as "+". $PWD Working directory (directory you are in at the time) This is the analog to the pwd builtin command. #!/bin/bash E_WRONG_DIRECTORY=83 clear # Clear screen. Chapter 9. Variables Revisited 84
- 91. Advanced Bash-Scripting Guide TargetDirectory=/home/bozo/projects/GreatAmericanNovel cd $TargetDirectory echo "Deleting stale files in $TargetDirectory." if [ "$PWD" != "$TargetDirectory" ] then # Keep from wiping out wrong directory by accident. echo "Wrong directory!" echo "In $PWD, rather than $TargetDirectory!" echo "Bailing out!" exit $E_WRONG_DIRECTORY fi rm -rf * rm .[A-Za-z0-9]* # Delete dotfiles. # rm -f .[^.]* ..?* to remove filenames beginning with multiple dots. # (shopt -s dotglob; rm -f *) will also work. # Thanks, S.C. for pointing this out. # A filename (`basename`) may contain all characters in the 0 - 255 range, #+ except "/". # Deleting files beginning with weird characters, such as - #+ is left as an exercise. echo echo "Done." echo "Old files deleted in $TargetDirectory." echo # Various other operations here, as necessary. exit $? $REPLY The default value when a variable is not supplied to read. Also applicable to select menus, but only supplies the item number of the variable chosen, not the value of the variable itself. #!/bin/bash # reply.sh # REPLY is the default value for a 'read' command. echo echo -n "What is your favorite vegetable? " read echo "Your favorite vegetable is $REPLY." # REPLY holds the value of last "read" if and only if #+ no variable supplied. echo echo -n "What is your favorite fruit? " read fruit echo "Your favorite fruit is $fruit." echo "but..." echo "Value of $REPLY is still $REPLY." # $REPLY is still set to its previous value because #+ the variable $fruit absorbed the new "read" value. echo exit 0 Chapter 9. Variables Revisited 85
- 92. Advanced Bash-Scripting Guide $SECONDS The number of seconds the script has been running. #!/bin/bash TIME_LIMIT=10 INTERVAL=1 echo echo "Hit Control-C to exit before $TIME_LIMIT seconds." echo while [ "$SECONDS" -le "$TIME_LIMIT" ] do if [ "$SECONDS" -eq 1 ] then units=second else units=seconds fi echo "This script has been running $SECONDS $units." # On a slow or overburdened machine, the script may skip a count #+ every once in a while. sleep $INTERVAL done echo -e "a" # Beep! exit 0 $SHELLOPTS The list of enabled shell options, a readonly variable. bash$ echo $SHELLOPTS braceexpand:hashall:histexpand:monitor:history:interactive-comments:emacs $SHLVL Shell level, how deeply Bash is nested. [37] If, at the command-line, $SHLVL is 1, then in a script it will increment to 2. This variable is not affected by subshells. Use $BASH_SUBSHELL when you need an indication of subshell nesting. $TMOUT If the $TMOUT environmental variable is set to a non-zero value time, then the shell prompt will time out after $time seconds. This will cause a logout. As of version 2.05b of Bash, it is now possible to use $TMOUT in a script in combination with read. # Works in scripts for Bash, versions 2.05b and later. TMOUT=3 # Prompt times out at three seconds. echo "What is your favorite song?" echo "Quickly now, you only have $TMOUT seconds to answer!" read song if [ -z "$song" ] Chapter 9. Variables Revisited 86
- 93. Advanced Bash-Scripting Guide then song="(no answer)" # Default response. fi echo "Your favorite song is $song." There are other, more complex, ways of implementing timed input in a script. One alternative is to set up a timing loop to signal the script when it times out. This also requires a signal handling routine to trap (see Example 29-5) the interrupt generated by the timing loop (whew!). Example 9-2. Timed Input #!/bin/bash # timed-input.sh # TMOUT=3 Also works, as of newer versions of Bash. TIMER_INTERRUPT=14 TIMELIMIT=3 # Three seconds in this instance. # May be set to different value. PrintAnswer() { if [ "$answer" = TIMEOUT ] then echo $answer else # Don't want to mix up the two instances. echo "Your favorite veggie is $answer" kill $! # Kills no-longer-needed TimerOn function #+ running in background. # $! is PID of last job running in background. fi } TimerOn() { sleep $TIMELIMIT && kill -s 14 $$ & # Waits 3 seconds, then sends sigalarm to script. } Int14Vector() { answer="TIMEOUT" PrintAnswer exit $TIMER_INTERRUPT } trap Int14Vector $TIMER_INTERRUPT # Timer interrupt (14) subverted for our purposes. echo "What is your favorite vegetable " TimerOn read answer PrintAnswer Chapter 9. Variables Revisited 87
- 94. Advanced Bash-Scripting Guide # Admittedly, this is a kludgy implementation of timed input. # However, the "-t" option to "read" simplifies this task. # See the "t-out.sh" script. # However, what about timing not just single user input, #+ but an entire script? # If you need something really elegant ... #+ consider writing the application in C or C++, #+ using appropriate library functions, such as 'alarm' and 'setitimer.' exit 0 An alternative is using stty. Example 9-3. Once more, timed input #!/bin/bash # timeout.sh # Written by Stephane Chazelas, #+ and modified by the document author. INTERVAL=5 # timeout interval timedout_read() { timeout=$1 varname=$2 old_tty_settings=`stty -g` stty -icanon min 0 time ${timeout}0 eval read $varname # or just read $varname stty "$old_tty_settings" # See man page for "stty." } echo; echo -n "What's your name? Quick! " timedout_read $INTERVAL your_name # This may not work on every terminal type. # The maximum timeout depends on the terminal. #+ (it is often 25.5 seconds). echo if [ ! -z "$your_name" ] # If name input before timeout ... then echo "Your name is $your_name." else echo "Timed out." fi echo # The behavior of this script differs somewhat from "timed-input.sh." # At each keystroke, the counter resets. exit 0 Perhaps the simplest method is using the -t option to read. Chapter 9. Variables Revisited 88
- 95. Advanced Bash-Scripting Guide Example 9-4. Timed read #!/bin/bash # t-out.sh # Inspired by a suggestion from "syngin seven" (thanks). TIMELIMIT=4 # 4 seconds read -t $TIMELIMIT variable <&1 # ^^^ # In this instance, "<&1" is needed for Bash 1.x and 2.x, # but unnecessary for Bash 3.x. echo if [ -z "$variable" ] # Is null? then echo "Timed out, variable still unset." else echo "variable = $variable" fi exit 0 $UID User ID number Current user's user identification number, as recorded in /etc/passwd This is the current user's real id, even if she has temporarily assumed another identity through su. $UID is a readonly variable, not subject to change from the command line or within a script, and is the counterpart to the id builtin. Example 9-5. Am I root? #!/bin/bash # am-i-root.sh: Am I root or not? ROOT_UID=0 # Root has $UID 0. if [ "$UID" -eq "$ROOT_UID" ] # Will the real "root" please stand up? then echo "You are root." else echo "You are just an ordinary user (but mom loves you just the same)." fi exit 0 # ============================================================= # # Code below will not execute, because the script already exited. # An alternate method of getting to the root of matters: ROOTUSER_NAME=root username=`id -nu` # Or... username=`whoami` Chapter 9. Variables Revisited 89
- 96. Advanced Bash-Scripting Guide if [ "$username" = "$ROOTUSER_NAME" ] then echo "Rooty, toot, toot. You are root." else echo "You are just a regular fella." fi See also Example 2-3. The variables $ENV, $LOGNAME, $MAIL, $TERM, $USER, and $USERNAME are not Bash builtins. These are, however, often set as environmental variables in one of the Bash startup files. $SHELL, the name of the user's login shell, may be set from /etc/passwd or in an "init" script, and it is likewise not a Bash builtin. tcsh% echo $LOGNAME bozo tcsh% echo $SHELL /bin/tcsh tcsh% echo $TERM rxvt bash$ echo $LOGNAME bozo bash$ echo $SHELL /bin/tcsh bash$ echo $TERM rxvt Positional Parameters $0, $1, $2, etc. Positional parameters, passed from command line to script, passed to a function, or set to a variable (see Example 4-5 and Example 14-16) $# Number of command-line arguments [38] or positional parameters (see Example 33-2) $* All of the positional parameters, seen as a single word "$*" must be quoted. $@ Same as $*, but each parameter is a quoted string, that is, the parameters are passed on intact, without interpretation or expansion. This means, among other things, that each parameter in the argument list is seen as a separate word. Of course, "$@" should be quoted. Example 9-6. arglist: Listing arguments with $* and $@ #!/bin/bash # arglist.sh # Invoke this script with several arguments, such as "one two three". E_BADARGS=65 Chapter 9. Variables Revisited 90
- 97. Advanced Bash-Scripting Guide if [ ! -n "$1" ] then echo "Usage: `basename $0` argument1 argument2 etc." exit $E_BADARGS fi echo index=1 # Initialize count. echo "Listing args with "$*":" for arg in "$*" # Doesn't work properly if "$*" isn't quoted. do echo "Arg #$index = $arg" let "index+=1" done # $* sees all arguments as single word. echo "Entire arg list seen as single word." echo index=1 # Reset count. # What happens if you forget to do this? echo "Listing args with "$@":" for arg in "$@" do echo "Arg #$index = $arg" let "index+=1" done # $@ sees arguments as separate words. echo "Arg list seen as separate words." echo index=1 # Reset count. echo "Listing args with $* (unquoted):" for arg in $* do echo "Arg #$index = $arg" let "index+=1" done # Unquoted $* sees arguments as separate words. echo "Arg list seen as separate words." exit 0 Following a shift, the $@ holds the remaining command-line parameters, lacking the previous $1, which was lost. #!/bin/bash # Invoke with ./scriptname 1 2 3 4 5 echo "$@" # 1 2 3 4 5 shift echo "$@" # 2 3 4 5 shift echo "$@" # 3 4 5 # Each "shift" loses parameter $1. # "$@" then contains the remaining parameters. The $@ special parameter finds use as a tool for filtering input into shell scripts. The cat "$@" construction accepts input to a script either from stdin or from files given as parameters to the Chapter 9. Variables Revisited 91
- 98. Advanced Bash-Scripting Guide script. See Example 15-24 and Example 15-25. The $* and $@ parameters sometimes display inconsistent and puzzling behavior, depending on the setting of $IFS. Example 9-7. Inconsistent $* and $@ behavior #!/bin/bash # Erratic behavior of the "$*" and "$@" internal Bash variables, #+ depending on whether they are quoted or not. # Inconsistent handling of word splitting and linefeeds. set -- "First one" "second" "third:one" "" "Fifth: :one" # Setting the script arguments, $1, $2, etc. echo echo 'IFS unchanged, using "$*"' c=0 for i in "$*" # quoted do echo "$((c+=1)): [$i]" # This line remains the same in every instance. # Echo args. done echo --- echo 'IFS unchanged, using $*' c=0 for i in $* # unquoted do echo "$((c+=1)): [$i]" done echo --- echo 'IFS unchanged, using "$@"' c=0 for i in "$@" do echo "$((c+=1)): [$i]" done echo --- echo 'IFS unchanged, using $@' c=0 for i in $@ do echo "$((c+=1)): [$i]" done echo --- IFS=: echo 'IFS=":", using "$*"' c=0 for i in "$*" do echo "$((c+=1)): [$i]" done echo --- echo 'IFS=":", using $*' c=0 for i in $* do echo "$((c+=1)): [$i]" Chapter 9. Variables Revisited 92
- 99. Advanced Bash-Scripting Guide done echo --- var=$* echo 'IFS=":", using "$var" (var=$*)' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done echo --- echo 'IFS=":", using $var (var=$*)' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo --- var="$*" echo 'IFS=":", using $var (var="$*")' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo --- echo 'IFS=":", using "$var" (var="$*")' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done echo --- echo 'IFS=":", using "$@"' c=0 for i in "$@" do echo "$((c+=1)): [$i]" done echo --- echo 'IFS=":", using $@' c=0 for i in $@ do echo "$((c+=1)): [$i]" done echo --- var=$@ echo 'IFS=":", using $var (var=$@)' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo --- echo 'IFS=":", using "$var" (var=$@)' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done echo --- Chapter 9. Variables Revisited 93
- 100. Advanced Bash-Scripting Guide var="$@" echo 'IFS=":", using "$var" (var="$@")' c=0 for i in "$var" do echo "$((c+=1)): [$i]" done echo --- echo 'IFS=":", using $var (var="$@")' c=0 for i in $var do echo "$((c+=1)): [$i]" done echo # Try this script with ksh or zsh -y. exit 0 # This example script by Stephane Chazelas, # and slightly modified by the document author. The $@ and $* parameters differ only when between double quotes. Example 9-8. $* and $@ when $IFS is empty #!/bin/bash # If $IFS set, but empty, #+ then "$*" and "$@" do not echo positional params as expected. mecho () # Echo positional parameters. { echo "$1,$2,$3"; } IFS="" # Set, but empty. set a b c # Positional parameters. mecho "$*" # abc,, # ^^ mecho $* # a,b,c mecho $@ # a,b,c mecho "$@" # a,b,c # The behavior of $* and $@ when $IFS is empty depends #+ on which Bash or sh version being run. # It is therefore inadvisable to depend on this "feature" in a script. # Thanks, Stephane Chazelas. exit Other Special Parameters Chapter 9. Variables Revisited 94
- 101. Advanced Bash-Scripting Guide $- Flags passed to script (using set). See Example 14-16. This was originally a ksh construct adopted into Bash, and unfortunately it does not seem to work reliably in Bash scripts. One possible use for it is to have a script self-test whether it is interactive. $! PID (process ID) of last job run in background LOG=$0.log COMMAND1="sleep 100" echo "Logging PIDs background commands for script: $0" >> "$LOG" # So they can be monitored, and killed as necessary. echo >> "$LOG" # Logging commands. echo -n "PID of "$COMMAND1": " >> "$LOG" ${COMMAND1} & echo $! >> "$LOG" # PID of "sleep 100": 1506 # Thank you, Jacques Lederer, for suggesting this. Using $! for job control: possibly_hanging_job & { sleep ${TIMEOUT}; eval 'kill -9 $!' &> /dev/null; } # Forces completion of an ill-behaved program. # Useful, for example, in init scripts. # Thank you, Sylvain Fourmanoit, for this creative use of the "!" variable. Or, alternately: # This example by Matthew Sage. # Used with permission. TIMEOUT=30 # Timeout value in seconds count=0 possibly_hanging_job & { while ((count < TIMEOUT )); do eval '[ ! -d "/proc/$!" ] && ((count = TIMEOUT))' # /proc is where information about running processes is found. # "-d" tests whether it exists (whether directory exists). # So, we're waiting for the job in question to show up. ((count++)) sleep 1 done eval '[ -d "/proc/$!" ] && kill -15 $!' # If the hanging job is running, kill it. } $_ Special variable set to final argument of previous command executed. Example 9-9. Underscore variable Chapter 9. Variables Revisited 95
- 102. Advanced Bash-Scripting Guide #!/bin/bash echo $_ # /bin/bash # Just called /bin/bash to run the script. # Note that this will vary according to #+ how the script is invoked. du >/dev/null # So no output from command. echo $_ # du ls -al >/dev/null # So no output from command. echo $_ # -al (last argument) : echo $_ # : $? Exit status of a command, function, or the script itself (see Example 23-7) $$ Process ID (PID) of the script itself. [39] The $$ variable often finds use in scripts to construct "unique" temp file names (see Example 29-6, Example 15-31, and Example 14-27). This is usually simpler than invoking mktemp. 9.2. Manipulating Strings Bash supports a surprising number of string manipulation operations. Unfortunately, these tools lack a unified focus. Some are a subset of parameter substitution, and others fall under the functionality of the UNIX expr command. This results in inconsistent command syntax and overlap of functionality, not to mention confusion. String Length ${#string} expr length $string These are the equivalent of strlen() in C. expr "$string" : '.*' stringZ=abcABC123ABCabc echo ${#stringZ} # 15 echo `expr length $stringZ` # 15 echo `expr "$stringZ" : '.*'` # 15 Example 9-10. Inserting a blank line between paragraphs in a text file #!/bin/bash # paragraph-space.sh # Ver. 2.0, Reldate 05Aug08 # Inserts a blank line between paragraphs of a single-spaced text file. # Usage: $0 <FILENAME MINLEN=60 # May need to change this value. # Assume lines shorter than $MINLEN characters ending in a period Chapter 9. Variables Revisited 96
- 103. Advanced Bash-Scripting Guide #+ terminate a paragraph. See exercises at end of script. while read line # For as many lines as the input file has... do echo "$line" # Output the line itself. len=${#line} if [[ "$len" -lt "$MINLEN" && "$line" =~ [*.] ]] then echo # Add a blank line immediately fi #+ after short line terminated by a period. done exit # Exercises: # --------- # 1) The script usually inserts a blank line at the end #+ of the target file. Fix this. # 2) Line 17 only considers periods as sentence terminators. # Modify this to include other common end-of-sentence characters, #+ such as ?, !, and ". Length of Matching Substring at Beginning of String expr match "$string" '$substring' $substring is a regular expression. expr "$string" : '$substring' $substring is a regular expression. stringZ=abcABC123ABCabc # |------| # 12345678 echo `expr match "$stringZ" 'abc[A-Z]*.2'` # 8 echo `expr "$stringZ" : 'abc[A-Z]*.2'` # 8 Index expr index $string $substring Numerical position in $string of first character in $substring that matches. stringZ=abcABC123ABCabc # 123456 ... echo `expr index "$stringZ" C12` # 6 # C position. echo `expr index "$stringZ" 1c` # 3 # 'c' (in #3 position) matches before '1'. This is the near equivalent of strchr() in C. Substring Extraction ${string:position} Extracts substring from $string at $position. Chapter 9. Variables Revisited 97
- 104. Advanced Bash-Scripting Guide If the $string parameter is "*" or "@", then this extracts the positional parameters, [40] starting at $position. ${string:position:length} Extracts $length characters of substring from $string at $position. stringZ=abcABC123ABCabc # 0123456789..... # 0-based indexing. echo ${stringZ:0} # abcABC123ABCabc echo ${stringZ:1} # bcABC123ABCabc echo ${stringZ:7} # 23ABCabc echo ${stringZ:7:3} # 23A # Three characters of substring. # Is it possible to index from the right end of the string? echo ${stringZ:-4} # abcABC123ABCabc # Defaults to full string, as in ${parameter:-default}. # However . . . echo ${stringZ:(-4)} # Cabc echo ${stringZ: -4} # Cabc # Now, it works. # Parentheses or added space "escape" the position parameter. # Thank you, Dan Jacobson, for pointing this out. The position and length arguments can be "parameterized," that is, represented as a variable, rather than as a numerical constant. Example 9-11. Generating an 8-character "random" string #!/bin/bash # rand-string.sh # Generating an 8-character "random" string. if [ -n "$1" ] # If command-line argument present, then #+ then set start-string to it. str0="$1" else # Else use PID of script as start-string. str0="$$" fi POS=2 # Starting from position 2 in the string. LEN=8 # Extract eight characters. str1=$( echo "$str0" | md5sum | md5sum ) # Doubly scramble: ^^^^^^ ^^^^^^ randstring="${str1:$POS:$LEN}" # Can parameterize ^^^^ ^^^^ echo "$randstring" Chapter 9. Variables Revisited 98
- 105. Advanced Bash-Scripting Guide exit $? # bozo$ ./rand-string.sh my-password # 1bdd88c4 # No, this is is not recommended #+ as a method of generating hack-proof passwords. If the $string parameter is "*" or "@", then this extracts a maximum of $length positional parameters, starting at $position. echo ${*:2} # Echoes second and following positional parameters. echo ${@:2} # Same as above. echo ${*:2:3} # Echoes three positional parameters, starting at second. expr substr $string $position $length Extracts $length characters from $string starting at $position. stringZ=abcABC123ABCabc # 123456789...... # 1-based indexing. echo `expr substr $stringZ 1 2` # ab echo `expr substr $stringZ 4 3` # ABC expr match "$string" '($substring)' Extracts $substring at beginning of $string, where $substring is a regular expression. expr "$string" : '($substring)' Extracts $substring at beginning of $string, where $substring is a regular expression. stringZ=abcABC123ABCabc # ======= echo `expr match "$stringZ" '(.[b-c]*[A-Z]..[0-9])'` # abcABC1 echo `expr "$stringZ" : '(.[b-c]*[A-Z]..[0-9])'` # abcABC1 echo `expr "$stringZ" : '(.......)'` # abcABC1 # All of the above forms give an identical result. expr match "$string" '.*($substring)' Extracts $substring at end of $string, where $substring is a regular expression. expr "$string" : '.*($substring)' Extracts $substring at end of $string, where $substring is a regular expression. stringZ=abcABC123ABCabc # ====== echo `expr match "$stringZ" '.*([A-C][A-C][A-C][a-c]*)'` # ABCabc echo `expr "$stringZ" : '.*(......)'` # ABCabc Substring Removal ${string#substring} Deletes shortest match of $substring from front of $string. ${string##substring} Deletes longest match of $substring from front of $string. stringZ=abcABC123ABCabc Chapter 9. Variables Revisited 99
- 106. Advanced Bash-Scripting Guide # |----| shortest # |----------| longest echo ${stringZ#a*C} # 123ABCabc # Strip out shortest match between 'a' and 'C'. echo ${stringZ##a*C} # abc # Strip out longest match between 'a' and 'C'. ${string%substring} Deletes shortest match of $substring from back of $string. For example: # Rename all filenames in $PWD with "TXT" suffix to a "txt" suffix. # For example, "file1.TXT" becomes "file1.txt" . . . SUFF=TXT suff=txt for i in $(ls *.$SUFF) do mv -f $i ${i%.$SUFF}.$suff # Leave unchanged everything *except* the shortest pattern match #+ starting from the right-hand-side of the variable $i . . . done ### This could be condensed into a "one-liner" if desired. # Thank you, Rory Winston. ${string%%substring} Deletes longest match of $substring from back of $string. stringZ=abcABC123ABCabc # || shortest # |------------| longest echo ${stringZ%b*c} # abcABC123ABCa # Strip out shortest match between 'b' and 'c', from back of $stringZ. echo ${stringZ%%b*c} # a # Strip out longest match between 'b' and 'c', from back of $stringZ. This operator is useful for generating filenames. Example 9-12. Converting graphic file formats, with filename change #!/bin/bash # cvt.sh: # Converts all the MacPaint image files in a directory to "pbm" format. # Uses the "macptopbm" binary from the "netpbm" package, #+ which is maintained by Brian Henderson (bryanh@giraffe-data.com). # Netpbm is a standard part of most Linux distros. OPERATION=macptopbm SUFFIX=pbm # New filename suffix. if [ -n "$1" ] then directory=$1 # If directory name given as a script argument... Chapter 9. Variables Revisited 100
- 107. Advanced Bash-Scripting Guide else directory=$PWD # Otherwise use current working directory. fi # Assumes all files in the target directory are MacPaint image files, #+ with a ".mac" filename suffix. for file in $directory/* # Filename globbing. do filename=${file%.*c} # Strip ".mac" suffix off filename #+ ('.*c' matches everything #+ between '.' and 'c', inclusive). $OPERATION $file > "$filename.$SUFFIX" # Redirect conversion to new filename. rm -f $file # Delete original files after converting. echo "$filename.$SUFFIX" # Log what is happening to stdout. done exit 0 # Exercise: # -------- # As it stands, this script converts *all* the files in the current #+ working directory. # Modify it to work *only* on files with a ".mac" suffix. Example 9-13. Converting streaming audio files to ogg #!/bin/bash # ra2ogg.sh: Convert streaming audio files (*.ra) to ogg. # Uses the "mplayer" media player program: # http://www.mplayerhq.hu/homepage # Uses the "ogg" library and "oggenc": # http://www.xiph.org/ # # This script may need appropriate codecs installed, such as sipr.so ... # Possibly also the compat-libstdc++ package. OFILEPREF=${1%%ra} # Strip off the "ra" suffix. OFILESUFF=wav # Suffix for wav file. OUTFILE="$OFILEPREF""$OFILESUFF" E_NOARGS=85 if [ -z "$1" ] # Must specify a filename to convert. then echo "Usage: `basename $0` [filename]" exit $E_NOARGS fi ########################################################################## mplayer "$1" -ao pcm:file=$OUTFILE oggenc "$OUTFILE" # Correct file extension automatically added by oggenc. ########################################################################## rm "$OUTFILE" # Delete intermediate *.wav file. # If you want to keep it, comment out above line. exit $? Chapter 9. Variables Revisited 101
- 108. Advanced Bash-Scripting Guide # Note: # ---- # On a Website, simply clicking on a *.ram streaming audio file #+ usually only downloads the URL of the actual *.ra audio file. # You can then use "wget" or something similar #+ to download the *.ra file itself. # Exercises: # --------- # As is, this script converts only *.ra filenames. # Add flexibility by permitting use of *.ram and other filenames. # # If you're really ambitious, expand the script #+ to do automatic downloads and conversions of streaming audio files. # Given a URL, batch download streaming audio files (using "wget") #+ and convert them on the fly. A simple emulation of getopt using substring-extraction constructs. Example 9-14. Emulating getopt #!/bin/bash # getopt-simple.sh # Author: Chris Morgan # Used in the ABS Guide with permission. getopt_simple() { echo "getopt_simple()" echo "Parameters are '$*'" until [ -z "$1" ] do echo "Processing parameter of: '$1'" if [ ${1:0:1} = '/' ] then tmp=${1:1} # Strip off leading '/' . . . parameter=${tmp%%=*} # Extract name. value=${tmp##*=} # Extract value. echo "Parameter: '$parameter', value: '$value'" eval $parameter=$value fi shift done } # Pass all options to getopt_simple(). getopt_simple $* echo "test is '$test'" echo "test2 is '$test2'" exit 0 # See also, UseGetOpt.sh, a modified versio of this script. --- sh getopt_example.sh /test=value1 /test2=value2 Chapter 9. Variables Revisited 102
- 109. Advanced Bash-Scripting Guide Parameters are '/test=value1 /test2=value2' Processing parameter of: '/test=value1' Parameter: 'test', value: 'value1' Processing parameter of: '/test2=value2' Parameter: 'test2', value: 'value2' test is 'value1' test2 is 'value2' Substring Replacement ${string/substring/replacement} Replace first match of $substring with $replacement. [41] ${string//substring/replacement} Replace all matches of $substring with $replacement. stringZ=abcABC123ABCabc echo ${stringZ/abc/xyz} # xyzABC123ABCabc # Replaces first match of 'abc' with 'xyz'. echo ${stringZ//abc/xyz} # xyzABC123ABCxyz # Replaces all matches of 'abc' with # 'xyz'. echo --------------- echo "$stringZ" # abcABC123ABCabc echo --------------- # The string itself is not altered! # Can the match and replacement strings be parameterized? match=abc repl=000 echo ${stringZ/$match/$repl} # 000ABC123ABCabc # ^ ^ ^^^ echo ${stringZ//$match/$repl} # 000ABC123ABC000 # Yes! ^ ^ ^^^ ^^^ echo # What happens if no $replacement string is supplied? echo ${stringZ/abc} # ABC123ABCabc echo ${stringZ//abc} # ABC123ABC # A simple deletion takes place. ${string/#substring/replacement} If $substring matches front end of $string, substitute $replacement for $substring. ${string/%substring/replacement} If $substring matches back end of $string, substitute $replacement for $substring. stringZ=abcABC123ABCabc echo ${stringZ/#abc/XYZ} # XYZABC123ABCabc # Replaces front-end match of 'abc' with 'XYZ'. echo ${stringZ/%abc/XYZ} # abcABC123ABCXYZ # Replaces back-end match of 'abc' with 'XYZ'. Chapter 9. Variables Revisited 103
- 110. Advanced Bash-Scripting Guide 9.2.1. Manipulating strings using awk A Bash script may invoke the string manipulation facilities of awk as an alternative to using its built-in operations. Example 9-15. Alternate ways of extracting and locating substrings #!/bin/bash # substring-extraction.sh String=23skidoo1 # 012345678 Bash # 123456789 awk # Note different string indexing system: # Bash numbers first character of string as 0. # Awk numbers first character of string as 1. echo ${String:2:4} # position 3 (0-1-2), 4 characters long # skid # The awk equivalent of ${string:pos:length} is substr(string,pos,length). echo | awk ' { print substr("'"${String}"'",3,4) # skid } ' # Piping an empty "echo" to awk gives it dummy input, #+ and thus makes it unnecessary to supply a filename. echo "----" # And likewise: echo | awk ' { print index("'"${String}"'", "skid") # 3 } # (skid starts at position 3) ' # The awk equivalent of "expr index" ... exit 0 9.2.2. Further Reference For more on string manipulation in scripts, refer to Section 9.3 and the relevant section of the expr command listing. Script examples: 1. Example 15-9 2. Example 9-18 3. Example 9-19 4. Example 9-20 5. Example 9-22 6. Example A-36 7. Example A-41 Chapter 9. Variables Revisited 104
- 111. Advanced Bash-Scripting Guide 9.3. Parameter Substitution Manipulating and/or expanding variables ${parameter} Same as $parameter, i.e., value of the variable parameter. In certain contexts, only the less ambiguous ${parameter} form works. May be used for concatenating variables with strings. your_id=${USER}-on-${HOSTNAME} echo "$your_id" # echo "Old $PATH = $PATH" PATH=${PATH}:/opt/bin #Add /opt/bin to $PATH for duration of script. echo "New $PATH = $PATH" ${parameter-default}, ${parameter:-default} If parameter not set, use default. echo ${username-`whoami`} # Echoes the result of `whoami`, if variable $username is still unset. ${parameter-default} and ${parameter:-default} are almost equivalent. The extra : makes a difference only when parameter has been declared, but is null. #!/bin/bash # param-sub.sh # Whether a variable has been declared #+ affects triggering of the default option #+ even if the variable is null. username0= echo "username0 has been declared, but is set to null." echo "username0 = ${username0-`whoami`}" # Will not echo. echo echo username1 has not been declared. echo "username1 = ${username1-`whoami`}" # Will echo. username2= echo "username2 has been declared, but is set to null." echo "username2 = ${username2:-`whoami`}" # ^ # Will echo because of :- rather than just - in condition test. # Compare to first instance, above. # Chapter 9. Variables Revisited 105
- 112. Advanced Bash-Scripting Guide # Once again: variable= # variable has been declared, but is set to null. echo "${variable-0}" # (no output) echo "${variable:-1}" # 1 # ^ unset variable echo "${variable-2}" # 2 echo "${variable:-3}" # 3 exit 0 The default parameter construct finds use in providing "missing" command-line arguments in scripts. DEFAULT_FILENAME=generic.data filename=${1:-$DEFAULT_FILENAME} # If not otherwise specified, the following command block operates #+ on the file "generic.data". # Begin-Command-Block # ... # ... # ... # End-Command-Block # From "hanoi2.bash" example: DISKS=${1:-E_NOPARAM} # Must specify how many disks. # Set $DISKS to $1 command-line-parameter, #+ or to $E_NOPARAM if that is unset. See also Example 3-4, Example 28-2, and Example A-6. Compare this method with using an and list to supply a default command-line argument. ${parameter=default}, ${parameter:=default} If parameter not set, set it to default. Both forms nearly equivalent. The : makes a difference only when $parameter has been declared and is null, [42] as above. echo ${username=`whoami`} # Variable "username" is now set to `whoami`. ${parameter+alt_value}, ${parameter:+alt_value} If parameter set, use alt_value, else use null string. Both forms nearly equivalent. The : makes a difference only when parameter has been declared and is null, see below. echo "###### ${parameter+alt_value} ########" echo a=${param1+xyz} echo "a = $a" # a = Chapter 9. Variables Revisited 106
- 113. Advanced Bash-Scripting Guide param2= a=${param2+xyz} echo "a = $a" # a = xyz param3=123 a=${param3+xyz} echo "a = $a" # a = xyz echo echo "###### ${parameter:+alt_value} ########" echo a=${param4:+xyz} echo "a = $a" # a = param5= a=${param5:+xyz} echo "a = $a" # a = # Different result from a=${param5+xyz} param6=123 a=${param6:+xyz} echo "a = $a" # a = xyz ${parameter?err_msg}, ${parameter:?err_msg} If parameter set, use it, else print err_msg. Both forms nearly equivalent. The : makes a difference only when parameter has been declared and is null, as above. Example 9-16. Using parameter substitution and error messages #!/bin/bash # Check some of the system's environmental variables. # This is good preventative maintenance. # If, for example, $USER, the name of the person at the console, is not set, #+ the machine will not recognize you. : ${HOSTNAME?} ${USER?} ${HOME?} ${MAIL?} echo echo "Name of the machine is $HOSTNAME." echo "You are $USER." echo "Your home directory is $HOME." echo "Your mail INBOX is located in $MAIL." echo echo "If you are reading this message," echo "critical environmental variables have been set." echo echo # ------------------------------------------------------ # The ${variablename?} construction can also check #+ for variables set within the script. ThisVariable=Value-of-ThisVariable # Note, by the way, that string variables may be set #+ to characters disallowed in their names. : ${ThisVariable?} Chapter 9. Variables Revisited 107
- 114. Advanced Bash-Scripting Guide echo "Value of ThisVariable is $ThisVariable". echo; echo : ${ZZXy23AB?"ZZXy23AB has not been set."} # Since ZZXy23AB has not been set, #+ then the script terminates with an error message. # You can specify the error message. # : ${variablename?"ERROR MESSAGE"} # Same result with: dummy_variable=${ZZXy23AB?} # dummy_variable=${ZZXy23AB?"ZXy23AB has not been set."} # # echo ${ZZXy23AB?} >/dev/null # Compare these methods of checking whether a variable has been set #+ with "set -u" . . . echo "You will not see this message, because script already terminated." HERE=0 exit $HERE # Will NOT exit here. # In fact, this script will return an exit status (echo $?) of 1. Example 9-17. Parameter substitution and "usage" messages #!/bin/bash # usage-message.sh : ${1?"Usage: $0 ARGUMENT"} # Script exits here if command-line parameter absent, #+ with following error message. # usage-message.sh: 1: Usage: usage-message.sh ARGUMENT echo "These two lines echo only if command-line parameter given." echo "command-line parameter = "$1"" exit 0 # Will exit here only if command-line parameter present. # Check the exit status, both with and without command-line parameter. # If command-line parameter present, then "$?" is 0. # If not, then "$?" is 1. Parameter substitution and/or expansion. The following expressions are the complement to the match in expr string operations (see Example 15-9). These particular ones are used mostly in parsing file path names. Variable length / Substring removal ${#var} String length (number of characters in $var). For an array, ${#array} is the length of the first element in the array. Exceptions: Chapter 9. Variables Revisited 108
- 115. Advanced Bash-Scripting Guide ◊ ${#*} and ${#@} give the number of positional parameters. ◊ For an array, ${#array[*]} and ${#array[@]} give the number of elements in the array. Example 9-18. Length of a variable #!/bin/bash # length.sh E_NO_ARGS=65 if [ $# -eq 0 ] # Must have command-line args to demo script. then echo "Please invoke this script with one or more command-line arguments." exit $E_NO_ARGS fi var01=abcdEFGH28ij echo "var01 = ${var01}" echo "Length of var01 = ${#var01}" # Now, let's try embedding a space. var02="abcd EFGH28ij" echo "var02 = ${var02}" echo "Length of var02 = ${#var02}" echo "Number of command-line arguments passed to script = ${#@}" echo "Number of command-line arguments passed to script = ${#*}" exit 0 ${var#Pattern}, ${var##Pattern} ${var#Pattern} Remove from $var the shortest part of $Pattern that matches the front end of $var. ${var##Pattern} Remove from $var the longest part of $Pattern that matches the front end of $var. A usage illustration from Example A-7: # Function from "days-between.sh" example. # Strips leading zero(s) from argument passed. strip_leading_zero () # Strip possible leading zero(s) { #+ from argument passed. return=${1#0} # The "1" refers to "$1" -- passed arg. } # The "0" is what to remove from "$1" -- strips zeros. Manfred Schwarb's more elaborate variation of the above: strip_leading_zero2 () # Strip possible leading zero(s), since otherwise { # Bash will interpret such numbers as octal values. shopt -s extglob # Turn on extended globbing. local val=${1##+(0)} # Use local variable, longest matching series of 0's. shopt -u extglob # Turn off extended globbing. _strip_leading_zero2=${val:-0} # If input was 0, return 0 instead of "". } Chapter 9. Variables Revisited 109
- 116. Advanced Bash-Scripting Guide Another usage illustration: echo `basename $PWD` # Basename of current working directory. echo "${PWD##*/}" # Basename of current working directory. echo echo `basename $0` # Name of script. echo $0 # Name of script. echo "${0##*/}" # Name of script. echo filename=test.data echo "${filename##*.}" # data # Extension of filename. ${var%Pattern}, ${var%%Pattern} ${var%Pattern} Remove from $var the shortest part of $Pattern that matches the back end of $var. ${var%%Pattern} Remove from $var the longest part of $Pattern that matches the back end of $var. Version 2 of Bash added additional options. Example 9-19. Pattern matching in parameter substitution #!/bin/bash # patt-matching.sh # Pattern matching using the # ## % %% parameter substitution operators. var1=abcd12345abc6789 pattern1=a*c # * (wild card) matches everything between a - c. echo echo "var1 = $var1" # abcd12345abc6789 echo "var1 = ${var1}" # abcd12345abc6789 # (alternate form) echo "Number of characters in ${var1} = ${#var1}" echo echo "pattern1 = $pattern1" # a*c (everything between 'a' and 'c') echo "--------------" echo '${var1#$pattern1} =' "${var1#$pattern1}" # d12345abc6789 # Shortest possible match, strips out first 3 characters abcd12345abc6789 # ^^^^^ |-| echo '${var1##$pattern1} =' "${var1##$pattern1}" # 6789 # Longest possible match, strips out first 12 characters abcd12345abc6789 # ^^^^^ |----------| echo; echo; echo pattern2=b*9 # everything between 'b' and '9' echo "var1 = $var1" # Still abcd12345abc6789 echo echo "pattern2 = $pattern2" echo "--------------" echo '${var1%pattern2} =' "${var1%$pattern2}" # abcd12345a Chapter 9. Variables Revisited 110
- 117. Advanced Bash-Scripting Guide # Shortest possible match, strips out last 6 characters abcd12345abc6789 # ^^^^ |----| echo '${var1%%pattern2} =' "${var1%%$pattern2}" # a # Longest possible match, strips out last 12 characters abcd12345abc6789 # ^^^^ |-------------| # Remember, # and ## work from the left end (beginning) of string, # % and %% work from the right end. echo exit 0 Example 9-20. Renaming file extensions: #!/bin/bash # rfe.sh: Renaming file extensions. # # rfe old_extension new_extension # # Example: # To rename all *.gif files in working directory to *.jpg, # rfe gif jpg E_BADARGS=65 case $# in 0|1) # The vertical bar means "or" in this context. echo "Usage: `basename $0` old_file_suffix new_file_suffix" exit $E_BADARGS # If 0 or 1 arg, then bail out. ;; esac for filename in *.$1 # Traverse list of files ending with 1st argument. do mv $filename ${filename%$1}$2 # Strip off part of filename matching 1st argument, #+ then append 2nd argument. done exit 0 Variable expansion / Substring replacement These constructs have been adopted from ksh. ${var:pos} Variable var expanded, starting from offset pos. ${var:pos:len} Expansion to a max of len characters of variable var, from offset pos. See Example A-13 for an example of the creative use of this operator. ${var/Pattern/Replacement} First match of Pattern, within var replaced with Replacement. If Replacement is omitted, then the first match of Pattern is replaced by nothing, that is, deleted. ${var//Pattern/Replacement} Chapter 9. Variables Revisited 111
- 118. Advanced Bash-Scripting Guide Global replacement. All matches of Pattern, within var replaced with Replacement. As above, if Replacement is omitted, then all occurrences of Pattern are replaced by nothing, that is, deleted. Example 9-21. Using pattern matching to parse arbitrary strings #!/bin/bash var1=abcd-1234-defg echo "var1 = $var1" t=${var1#*-*} echo "var1 (with everything, up to and including first - stripped out) = $t" # t=${var1#*-} works just the same, #+ since # matches the shortest string, #+ and * matches everything preceding, including an empty string. # (Thanks, Stephane Chazelas, for pointing this out.) t=${var1##*-*} echo "If var1 contains a "-", returns empty string... var1 = $t" t=${var1%*-*} echo "var1 (with everything from the last - on stripped out) = $t" echo # ------------------------------------------- path_name=/home/bozo/ideas/thoughts.for.today # ------------------------------------------- echo "path_name = $path_name" t=${path_name##/*/} echo "path_name, stripped of prefixes = $t" # Same effect as t=`basename $path_name` in this particular case. # t=${path_name%/}; t=${t##*/} is a more general solution, #+ but still fails sometimes. # If $path_name ends with a newline, then `basename $path_name` will not work, #+ but the above expression will. # (Thanks, S.C.) t=${path_name%/*.*} # Same effect as t=`dirname $path_name` echo "path_name, stripped of suffixes = $t" # These will fail in some cases, such as "../", "/foo////", # "foo/", "/". # Removing suffixes, especially when the basename has no suffix, #+ but the dirname does, also complicates matters. # (Thanks, S.C.) echo t=${path_name:11} echo "$path_name, with first 11 chars stripped off = $t" t=${path_name:11:5} echo "$path_name, with first 11 chars stripped off, length 5 = $t" echo t=${path_name/bozo/clown} Chapter 9. Variables Revisited 112
- 119. Advanced Bash-Scripting Guide echo "$path_name with "bozo" replaced by "clown" = $t" t=${path_name/today/} echo "$path_name with "today" deleted = $t" t=${path_name//o/O} echo "$path_name with all o's capitalized = $t" t=${path_name//o/} echo "$path_name with all o's deleted = $t" exit 0 ${var/#Pattern/Replacement} If prefix of var matches Pattern, then substitute Replacement for Pattern. ${var/%Pattern/Replacement} If suffix of var matches Pattern, then substitute Replacement for Pattern. Example 9-22. Matching patterns at prefix or suffix of string #!/bin/bash # var-match.sh: # Demo of pattern replacement at prefix / suffix of string. v0=abc1234zip1234abc # Original variable. echo "v0 = $v0" # abc1234zip1234abc echo # Match at prefix (beginning) of string. v1=${v0/#abc/ABCDEF} # abc1234zip1234abc # |-| echo "v1 = $v1" # ABCDEF1234zip1234abc # |----| # Match at suffix (end) of string. v2=${v0/%abc/ABCDEF} # abc1234zip123abc # |-| echo "v2 = $v2" # abc1234zip1234ABCDEF # |----| echo # ---------------------------------------------------- # Must match at beginning / end of string, #+ otherwise no replacement results. # ---------------------------------------------------- v3=${v0/#123/000} # Matches, but not at beginning. echo "v3 = $v3" # abc1234zip1234abc # NO REPLACEMENT. v4=${v0/%123/000} # Matches, but not at end. echo "v4 = $v4" # abc1234zip1234abc # NO REPLACEMENT. exit 0 ${!varprefix*}, ${!varprefix@} Matches names of all previously declared variables beginning with varprefix. # This is a variation on indirect reference, but with a * or @. # Bash, version 2.04, adds this feature. xyz23=whatever xyz24= Chapter 9. Variables Revisited 113
- 120. Advanced Bash-Scripting Guide a=${!xyz*} # Expands to *names* of declared variables # ^ ^ ^ + beginning with "xyz". echo "a = $a" # a = xyz23 xyz24 a=${!xyz@} # Same as above. echo "a = $a" # a = xyz23 xyz24 echo "---" abc23=something_else b=${!abc*} echo "b = $b" # b = abc23 c=${!b} # Now, the more familiar type of indirect reference. echo $c # something_else 9.4. Typing variables: declare or typeset The declare or typeset builtins, which are exact synonyms, permit modifying the properties of variables. This is a very weak form of the typing [43] available in certain programming languages. The declare command is specific to version 2 or later of Bash. The typeset command also works in ksh scripts. declare/typeset options -r readonly (declare -r var1 works the same as readonly var1) This is the rough equivalent of the C const type qualifier. An attempt to change the value of a readonly variable fails with an error message. declare -r var1=1 echo "var1 = $var1" # var1 = 1 (( var1++ )) # x.sh: line 4: var1: readonly variable -i integer declare -i number # The script will treat subsequent occurrences of "number" as an integer. number=3 echo "Number = $number" # Number = 3 number=three echo "Number = $number" # Number = 0 # Tries to evaluate the string "three" as an integer. Certain arithmetic operations are permitted for declared integer variables without the need for expr or let. n=6/3 echo "n = $n" # n = 6/3 declare -i n n=6/3 echo "n = $n" # n = 2 -a array Chapter 9. Variables Revisited 114
- 121. Advanced Bash-Scripting Guide declare -a indices The variable indices will be treated as an array. -f function(s) declare -f A declare -f line with no arguments in a script causes a listing of all the functions previously defined in that script. declare -f function_name A declare -f function_name in a script lists just the function named. -x export declare -x var3 This declares a variable as available for exporting outside the environment of the script itself. -x var=$value declare -x var3=373 The declare command permits assigning a value to a variable in the same statement as setting its properties. Example 9-23. Using declare to type variables #!/bin/bash func1 () { echo This is a function. } declare -f # Lists the function above. echo declare -i var1 # var1 is an integer. var1=2367 echo "var1 declared as $var1" var1=var1+1 # Integer declaration eliminates the need for 'let'. echo "var1 incremented by 1 is $var1." # Attempt to change variable declared as integer. echo "Attempting to change var1 to floating point value, 2367.1." var1=2367.1 # Results in error message, with no change to variable. echo "var1 is still $var1" echo declare -r var2=13.36 # 'declare' permits setting a variable property #+ and simultaneously assigning it a value. echo "var2 declared as $var2" # Attempt to change readonly variable. var2=13.37 # Generates error message, and exit from script. echo "var2 is still $var2" # This line will not execute. exit 0 # Script will not exit here. Chapter 9. Variables Revisited 115
- 122. Advanced Bash-Scripting Guide Using the declare builtin restricts the scope of a variable. foo () { FOO="bar" } bar () { foo echo $FOO } bar # Prints bar. However . . . foo (){ declare FOO="bar" } bar () { foo echo $FOO } bar # Prints nothing. # Thank you, Michael Iatrou, for pointing this out. 9.4.1. Another use for declare The declare command can be helpful in identifying variables, environmental or otherwise. This can be especially useful with arrays. bash$ declare | grep HOME /home/bozo bash$ zzy=68 bash$ declare | grep zzy zzy=68 bash$ Colors=([0]="purple" [1]="reddish-orange" [2]="light green") bash$ echo ${Colors[@]} purple reddish-orange light green bash$ declare | grep Colors Colors=([0]="purple" [1]="reddish-orange" [2]="light green") 9.5. Indirect References Chapter 9. Variables Revisited 116
- 123. Advanced Bash-Scripting Guide We have seen that referencing a variable, $var, fetches its value. But, what about the value of a value? What about $$var? The actual notation is $$var, usually preceded by an eval (and sometimes an echo). This is called an indirect reference. Example 9-24. Indirect Variable References #!/bin/bash # ind-ref.sh: Indirect variable referencing. # Accessing the contents of the contents of a variable. # First, let's fool around a little. var=23 echo "$var = $var" # $var = 23 # So far, everything as expected. But ... echo "$$var = $$var" # $$var = 4570var # Not useful ... # $$ expanded to PID of the script # -- refer to the entry on the $$ variable -- #+ and "var" is echoed as plain text. # (Thank you, Jakob Bohm, for pointing this out.) echo "$$var = $$var" # $$var = $23 # As expected. The first $ is escaped and pasted on to #+ the value of var ($var = 23 ). # Meaningful, but still not useful. # Now, let's start over and do it the right way. # ============================================== # a=letter_of_alphabet # Variable "a" holds the name of another variable. letter_of_alphabet=z echo # Direct reference. echo "a = $a" # a = letter_of_alphabet # Indirect reference. eval a=$$a # ^^^ Forcing an eval(uation), and ... # ^ Escaping the first $ ... # ------------------------------------------------------------------------ # The 'eval' forces an update of $a, sets it to the updated value of $$a. # So, we see why 'eval' so often shows up in indirect reference notation. # ------------------------------------------------------------------------ echo "Now a = $a" # Now a = z echo # Now, let's try changing the second-order reference. Chapter 9. Variables Revisited 117
- 124. Advanced Bash-Scripting Guide t=table_cell_3 table_cell_3=24 echo ""table_cell_3" = $table_cell_3" # "table_cell_3" = 24 echo -n "dereferenced "t" = "; eval echo $$t # dereferenced "t" = 24 # In this simple case, the following also works (why?). # eval t=$$t; echo ""t" = $t" echo t=table_cell_3 NEW_VAL=387 table_cell_3=$NEW_VAL echo "Changing value of "table_cell_3" to $NEW_VAL." echo ""table_cell_3" now $table_cell_3" echo -n "dereferenced "t" now "; eval echo $$t # "eval" takes the two arguments "echo" and "$$t" (set equal to $table_cell_3) echo # (Thanks, Stephane Chazelas, for clearing up the above behavior.) # A more straightforward method is the ${!t} notation, discussed in the #+ "Bash, version 2" section. # See also ex78.sh. exit 0 Indirect referencing in Bash is a multi-step process. First, take the name of a variable: varname. Then, reference it: $varname. Then, reference the reference: $$varname. Then, escape the first $: $$varname. Finally, force a reevaluation of the expression and assign it: eval newvar=$$varname. Of what practical use is indirect referencing of variables? It gives Bash a little of the functionality of pointers in C, for instance, in table lookup. And, it also has some other very interesting applications. . . . Nils Radtke shows how to build "dynamic" variable names and evaluate their contents. This can be useful when sourcing configuration files. #!/bin/bash # --------------------------------------------- # This could be "sourced" from a separate file. isdnMyProviderRemoteNet=172.16.0.100 isdnYourProviderRemoteNet=10.0.0.10 isdnOnlineService="MyProvider" # --------------------------------------------- remoteNet=$(eval "echo $$(echo isdn${isdnOnlineService}RemoteNet)") remoteNet=$(eval "echo $$(echo isdnMyProviderRemoteNet)") remoteNet=$(eval "echo $isdnMyProviderRemoteNet") remoteNet=$(eval "echo $isdnMyProviderRemoteNet") echo "$remoteNet" # 172.16.0.100 # ================================================================ Chapter 9. Variables Revisited 118
- 125. Advanced Bash-Scripting Guide # And, it gets even better. # Consider the following snippet given a variable named getSparc, #+ but no such variable getIa64: chkMirrorArchs () { arch="$1"; if [ "$(eval "echo ${$(echo get$(echo -ne $arch | sed 's/^(.).*/1/g' | tr 'a-z' 'A-Z'; echo $arch | sed 's/^.(.*)/1/g')):-false}")" = true ] then return 0; else return 1; fi; } getSparc="true" unset getIa64 chkMirrorArchs sparc echo $? # 0 # True chkMirrorArchs Ia64 echo $? # 1 # False # Notes: # ----- # Even the to-be-substituted variable name part is built explicitly. # The parameters to the chkMirrorArchs calls are all lower case. # The variable name is composed of two parts: "get" and "Sparc" . . . Example 9-25. Passing an indirect reference to awk #!/bin/bash # Another version of the "column totaler" script #+ that adds up a specified column (of numbers) in the target file. # This one uses indirect references. ARGS=2 E_WRONGARGS=85 if [ $# -ne "$ARGS" ] # Check for proper number of command-line args. then echo "Usage: `basename $0` filename column-number" exit $E_WRONGARGS fi filename=$1 # Name of file to operate on. column_number=$2 # Which column to total up. #===== Same as original script, up to this point =====# # A multi-line awk script is invoked by # awk " # ... # ... Chapter 9. Variables Revisited 119
- 126. Advanced Bash-Scripting Guide # ... # " # Begin awk script. # ------------------------------------------------- awk " { total += $${column_number} # Indirect reference } END { print total } " "$filename" # Note that awk doesn't need an eval preceding $$. # ------------------------------------------------- # End awk script. # Indirect variable reference avoids the hassles #+ of referencing a shell variable within the embedded awk script. # Thanks, Stephane Chazelas. exit $? This method of indirect referencing is a bit tricky. If the second order variable changes its value, then the first order variable must be properly dereferenced (as in the above example). Fortunately, the ${!variable} notation introduced with version 2 of Bash (see Example 34-2 and Example A-22) makes indirect referencing more intuitive. Bash does not support pointer arithmetic, and this severely limits the usefulness of indirect referencing. In fact, indirect referencing in a scripting language is, at best, something of an afterthought. 9.6. $RANDOM: generate random integer $RANDOM is an internal Bash function (not a constant) that returns a pseudorandom [44] integer in the range 0 - 32767. It should not be used to generate an encryption key. Example 9-26. Generating random numbers #!/bin/bash # $RANDOM returns a different random integer at each invocation. # Nominal range: 0 - 32767 (signed 16-bit integer). MAXCOUNT=10 count=1 echo echo "$MAXCOUNT random numbers:" echo "-----------------" while [ "$count" -le $MAXCOUNT ] # Generate 10 ($MAXCOUNT) random integers. do Chapter 9. Variables Revisited 120
- 127. Advanced Bash-Scripting Guide number=$RANDOM echo $number let "count += 1" # Increment count. done echo "-----------------" # If you need a random int within a certain range, use the 'modulo' operator. # This returns the remainder of a division operation. RANGE=500 echo number=$RANDOM let "number %= $RANGE" # ^^ echo "Random number less than $RANGE --- $number" echo # If you need a random integer greater than a lower bound, #+ then set up a test to discard all numbers below that. FLOOR=200 number=0 #initialize while [ "$number" -le $FLOOR ] do number=$RANDOM done echo "Random number greater than $FLOOR --- $number" echo # Let's examine a simple alternative to the above loop, namely # let "number = $RANDOM + $FLOOR" # That would eliminate the while-loop and run faster. # But, there might be a problem with that. What is it? # Combine above two techniques to retrieve random number between two limits. number=0 #initialize while [ "$number" -le $FLOOR ] do number=$RANDOM let "number %= $RANGE" # Scales $number down within $RANGE. done echo "Random number between $FLOOR and $RANGE --- $number" echo # Generate binary choice, that is, "true" or "false" value. BINARY=2 T=1 number=$RANDOM let "number %= $BINARY" # Note that let "number >>= 14" gives a better random distribution #+ (right shifts out everything except last binary digit). Chapter 9. Variables Revisited 121
- 128. Advanced Bash-Scripting Guide if [ "$number" -eq $T ] then echo "TRUE" else echo "FALSE" fi echo # Generate a toss of the dice. SPOTS=6 # Modulo 6 gives range 0 - 5. # Incrementing by 1 gives desired range of 1 - 6. # Thanks, Paulo Marcel Coelho Aragao, for the simplification. die1=0 die2=0 # Would it be better to just set SPOTS=7 and not add 1? Why or why not? # Tosses each die separately, and so gives correct odds. let "die1 = $RANDOM % $SPOTS +1" # Roll first one. let "die2 = $RANDOM % $SPOTS +1" # Roll second one. # Which arithmetic operation, above, has greater precedence -- #+ modulo (%) or addition (+)? let "throw = $die1 + $die2" echo "Throw of the dice = $throw" echo exit 0 Example 9-27. Picking a random card from a deck #!/bin/bash # pick-card.sh # This is an example of choosing random elements of an array. # Pick a card, any card. Suites="Clubs Diamonds Hearts Spades" Denominations="2 3 4 5 6 7 8 9 10 Jack Queen King Ace" Chapter 9. Variables Revisited 122
- 129. Advanced Bash-Scripting Guide # Note variables spread over multiple lines. suite=($Suites) # Read into array variable. denomination=($Denominations) num_suites=${#suite[*]} # Count how many elements. num_denominations=${#denomination[*]} echo -n "${denomination[$((RANDOM%num_denominations))]} of " echo ${suite[$((RANDOM%num_suites))]} # $bozo sh pick-cards.sh # Jack of Clubs # Thank you, "jipe," for pointing out this use of $RANDOM. exit 0 Example 9-28. Brownian Motion Simulation #!/bin/bash # brownian.sh # Author: Mendel Cooper # Reldate: 10/26/07 # License: GPL3 # ---------------------------------------------------------------- # This script models Brownian motion: #+ the random wanderings of tiny particles in a fluid, #+ as they are buffeted by random currents and collisions. #+ This is colloquially known as the "Drunkard's Walk." # It can also be considered as a stripped-down simulation of a #+ Galton Board, a slanted board with a pattern of pegs, #+ down which rolls a succession of marbles, one at a time. #+ At the bottom is a row of slots or catch basins in which #+ the marbles come to rest at the end of their journey. # Think of it as a kind of bare-bones Pachinko game. # As you see by running the script, #+ most of the marbles cluster around the center slot. #+ This is consistent with the expected binomial distribution. # As a Galton Board simulation, the script #+ disregards such parameters as #+ board tilt-angle, rolling friction of the marbles, #+ angles of impact, and elasticity of the pegs. # To what extent does this affect the accuracy of the simulation? # ---------------------------------------------------------------- PASSES=500 # Number of particle interactions / marbles. ROWS=10 # Number of "collisions" (or horiz. peg rows). RANGE=3 # 0 - 2 output range from $RANDOM. POS=0 # Left/right position. RANDOM=$$ # Seeds the random number generator from PID #+ of script. declare -a Slots # Array holding cumulative results of passes. NUMSLOTS=21 # Number of slots at bottom of board. Chapter 9. Variables Revisited 123
- 130. Advanced Bash-Scripting Guide Initialize_Slots () { # Zero out all elements of the array. for i in $( seq $NUMSLOTS ) do Slots[$i]=0 done echo # Blank line at beginning of run. } Show_Slots () { echo -n " " for i in $( seq $NUMSLOTS ) # Pretty-print array elements. do printf "%3d" ${Slots[$i]} # Allot three spaces per result. done echo # Row of slots: echo " |__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|__|" echo " ^^" echo # Note that if the count within any particular slot exceeds 99, #+ it messes up the display. # Running only(!) 500 passes usually avoids this. } Move () { # Move one unit right / left, or stay put. Move=$RANDOM # How random is $RANDOM? Well, let's see ... let "Move %= RANGE" # Normalize into range of 0 - 2. case "$Move" in 0 ) ;; # Do nothing, i.e., stay in place. 1 ) ((POS--));; # Left. 2 ) ((POS++));; # Right. * ) echo -n "Error ";; # Anomaly! (Should never occur.) esac } Play () { # Single pass (inner loop). i=0 while [ "$i" -lt "$ROWS" ] # One event per row. do Move ((i++)); done SHIFT=11 # Why 11, and not 10? let "POS += $SHIFT" # Shift "zero position" to center. (( Slots[$POS]++ )) # DEBUG: echo $POS } Run () { # Outer loop. p=0 while [ "$p" -lt "$PASSES" ] do Play (( p++ )) POS=0 # Reset to zero. Why? done Chapter 9. Variables Revisited 124
- 131. Advanced Bash-Scripting Guide } # -------------- # main () Initialize_Slots Run Show_Slots # -------------- exit $? # Exercises: # --------- # 1) Show the results in a vertical bar graph, or as an alternative, #+ a scattergram. # 2) Alter the script to use /dev/urandom instead of $RANDOM. # Will this make the results more random? Jipe points out a set of techniques for generating random numbers within a range. # Generate random number between 6 and 30. rnumber=$((RANDOM%25+6)) # Generate random number in the same 6 - 30 range, #+ but the number must be evenly divisible by 3. rnumber=$(((RANDOM%30/3+1)*3)) # Note that this will not work all the time. # It fails if $RANDOM%30 returns 0. # Frank Wang suggests the following alternative: rnumber=$(( RANDOM%27/3*3+6 )) Bill Gradwohl came up with an improved formula that works for positive numbers. rnumber=$(((RANDOM%(max-min+divisibleBy))/divisibleBy*divisibleBy+min)) Here Bill presents a versatile function that returns a random number between two specified values. Example 9-29. Random between values #!/bin/bash # random-between.sh # Random number between two specified values. # Script by Bill Gradwohl, with minor modifications by the document author. # Used with permission. randomBetween() { # Generates a positive or negative random number #+ between $min and $max #+ and divisible by $divisibleBy. # Gives a "reasonably random" distribution of return values. # # Bill Gradwohl - Oct 1, 2003 syntax() { # Function embedded within function. echo echo "Syntax: randomBetween [min] [max] [multiple]" Chapter 9. Variables Revisited 125
- 132. Advanced Bash-Scripting Guide echo echo -n "Expects up to 3 passed parameters, " echo "but all are completely optional." echo "min is the minimum value" echo "max is the maximum value" echo -n "multiple specifies that the answer must be " echo "a multiple of this value." echo " i.e. answer must be evenly divisible by this number." echo echo "If any value is missing, defaults area supplied as: 0 32767 1" echo -n "Successful completion returns 0, " echo "unsuccessful completion returns" echo "function syntax and 1." echo -n "The answer is returned in the global variable " echo "randomBetweenAnswer" echo -n "Negative values for any passed parameter are " echo "handled correctly." } local min=${1:-0} local max=${2:-32767} local divisibleBy=${3:-1} # Default values assigned, in case parameters not passed to function. local x local spread # Let's make sure the divisibleBy value is positive. [ ${divisibleBy} -lt 0 ] && divisibleBy=$((0-divisibleBy)) # Sanity check. if [ $# -gt 3 -o ${divisibleBy} -eq 0 -o ${min} -eq ${max} ]; then syntax return 1 fi # See if the min and max are reversed. if [ ${min} -gt ${max} ]; then # Swap them. x=${min} min=${max} max=${x} fi # If min is itself not evenly divisible by $divisibleBy, #+ then fix the min to be within range. if [ $((min/divisibleBy*divisibleBy)) -ne ${min} ]; then if [ ${min} -lt 0 ]; then min=$((min/divisibleBy*divisibleBy)) else min=$((((min/divisibleBy)+1)*divisibleBy)) fi fi # If max is itself not evenly divisible by $divisibleBy, #+ then fix the max to be within range. if [ $((max/divisibleBy*divisibleBy)) -ne ${max} ]; then if [ ${max} -lt 0 ]; then max=$((((max/divisibleBy)-1)*divisibleBy)) else max=$((max/divisibleBy*divisibleBy)) fi Chapter 9. Variables Revisited 126
- 133. Advanced Bash-Scripting Guide fi # --------------------------------------------------------------------- # Now, to do the real work. # Note that to get a proper distribution for the end points, #+ the range of random values has to be allowed to go between #+ 0 and abs(max-min)+divisibleBy, not just abs(max-min)+1. # The slight increase will produce the proper distribution for the #+ end points. # Changing the formula to use abs(max-min)+1 will still produce #+ correct answers, but the randomness of those answers is faulty in #+ that the number of times the end points ($min and $max) are returned #+ is considerably lower than when the correct formula is used. # --------------------------------------------------------------------- spread=$((max-min)) # Omair Eshkenazi points out that this test is unnecessary, #+ since max and min have already been switched around. [ ${spread} -lt 0 ] && spread=$((0-spread)) let spread+=divisibleBy randomBetweenAnswer=$(((RANDOM%spread)/divisibleBy*divisibleBy+min)) return 0 # However, Paulo Marcel Coelho Aragao points out that #+ when $max and $min are not divisible by $divisibleBy, #+ the formula fails. # # He suggests instead the following formula: # rnumber = $(((RANDOM%(max-min+1)+min)/divisibleBy*divisibleBy)) } # Let's test the function. min=-14 max=20 divisibleBy=3 # Generate an array of expected answers and check to make sure we get #+ at least one of each answer if we loop long enough. declare -a answer minimum=${min} maximum=${max} if [ $((minimum/divisibleBy*divisibleBy)) -ne ${minimum} ]; then if [ ${minimum} -lt 0 ]; then minimum=$((minimum/divisibleBy*divisibleBy)) else minimum=$((((minimum/divisibleBy)+1)*divisibleBy)) fi fi # If max is itself not evenly divisible by $divisibleBy, #+ then fix the max to be within range. if [ $((maximum/divisibleBy*divisibleBy)) -ne ${maximum} ]; then if [ ${maximum} -lt 0 ]; then Chapter 9. Variables Revisited 127
- 134. Advanced Bash-Scripting Guide maximum=$((((maximum/divisibleBy)-1)*divisibleBy)) else maximum=$((maximum/divisibleBy*divisibleBy)) fi fi # We need to generate only positive array subscripts, #+ so we need a displacement that that will guarantee #+ positive results. disp=$((0-minimum)) for ((i=${minimum}; i<=${maximum}; i+=divisibleBy)); do answer[i+disp]=0 done # Now loop a large number of times to see what we get. loopIt=1000 # The script author suggests 100000, #+ but that takes a good long while. for ((i=0; i<${loopIt}; ++i)); do # Note that we are specifying min and max in reversed order here to #+ make the function correct for this case. randomBetween ${max} ${min} ${divisibleBy} # Report an error if an answer is unexpected. [ ${randomBetweenAnswer} -lt ${min} -o ${randomBetweenAnswer} -gt ${max} ] && echo MIN or MAX error - ${randomBetweenAnswer}! [ $((randomBetweenAnswer%${divisibleBy})) -ne 0 ] && echo DIVISIBLE BY error - ${randomBetweenAnswer}! # Store the answer away statistically. answer[randomBetweenAnswer+disp]=$((answer[randomBetweenAnswer+disp]+1)) done # Let's check the results for ((i=${minimum}; i<=${maximum}; i+=divisibleBy)); do [ ${answer[i+displacement]} -eq 0 ] && echo "We never got an answer of $i." || echo "${i} occurred ${answer[i+displacement]} times." done exit 0 Just how random is $RANDOM? The best way to test this is to write a script that tracks the distribution of "random" numbers generated by $RANDOM. Let's roll a $RANDOM die a few times . . . Example 9-30. Rolling a single die with RANDOM #!/bin/bash # How random is RANDOM? RANDOM=$$ # Reseed the random number generator using script process ID. Chapter 9. Variables Revisited 128
- 135. Advanced Bash-Scripting Guide PIPS=6 # A die has 6 pips. MAXTHROWS=600 # Increase this if you have nothing better to do with your time. throw=0 # Throw count. ones=0 # Must initialize counts to zero, twos=0 #+ since an uninitialized variable is null, not zero. threes=0 fours=0 fives=0 sixes=0 print_result () { echo echo "ones = $ones" echo "twos = $twos" echo "threes = $threes" echo "fours = $fours" echo "fives = $fives" echo "sixes = $sixes" echo } update_count() { case "$1" in 0) let "ones += 1";; # Since die has no "zero", this corresponds to 1. 1) let "twos += 1";; # And this to 2, etc. 2) let "threes += 1";; 3) let "fours += 1";; 4) let "fives += 1";; 5) let "sixes += 1";; esac } echo while [ "$throw" -lt "$MAXTHROWS" ] do let "die1 = RANDOM % $PIPS" update_count $die1 let "throw += 1" done print_result exit 0 # The scores should distribute fairly evenly, assuming RANDOM is fairly random. # With $MAXTHROWS at 600, all should cluster around 100, plus-or-minus 20 or so. # # Keep in mind that RANDOM is a pseudorandom generator, #+ and not a spectacularly good one at that. # Randomness is a deep and complex subject. # Sufficiently long "random" sequences may exhibit #+ chaotic and other "non-random" behavior. # Exercise (easy): # --------------- Chapter 9. Variables Revisited 129
- 136. Advanced Bash-Scripting Guide # Rewrite this script to flip a coin 1000 times. # Choices are "HEADS" and "TAILS". As we have seen in the last example, it is best to reseed the RANDOM generator each time it is invoked. Using the same seed for RANDOM repeats the same series of numbers. [45] (This mirrors the behavior of the random() function in C.) Example 9-31. Reseeding RANDOM #!/bin/bash # seeding-random.sh: Seeding the RANDOM variable. MAXCOUNT=25 # How many numbers to generate. random_numbers () { count=0 while [ "$count" -lt "$MAXCOUNT" ] do number=$RANDOM echo -n "$number " let "count += 1" done } echo; echo RANDOM=1 # Setting RANDOM seeds the random number generator. random_numbers echo; echo RANDOM=1 # Same seed for RANDOM... random_numbers # ...reproduces the exact same number series. # # When is it useful to duplicate a "random" number series? echo; echo RANDOM=2 # Trying again, but with a different seed... random_numbers # gives a different number series. echo; echo # RANDOM=$$ seeds RANDOM from process id of script. # It is also possible to seed RANDOM from 'time' or 'date' commands. # Getting fancy... SEED=$(head -1 /dev/urandom | od -N 1 | awk '{ print $2 }') # Pseudo-random output fetched #+ from /dev/urandom (system pseudo-random device-file), #+ then converted to line of printable (octal) numbers by "od", #+ finally "awk" retrieves just one number for SEED. RANDOM=$SEED random_numbers echo; echo exit 0 Chapter 9. Variables Revisited 130
- 137. Advanced Bash-Scripting Guide The /dev/urandom pseudo-device file provides a method of generating much more "random" pseudorandom numbers than the $RANDOM variable. dd if=/dev/urandom of=targetfile bs=1 count=XX creates a file of well-scattered pseudorandom numbers. However, assigning these numbers to a variable in a script requires a workaround, such as filtering through od (as in above example, Example 15-14, and Example A-36), or even piping to md5sum (see Example 33-14). There are also other ways to generate pseudorandom numbers in a script. Awk provides a convenient means of doing this. Example 9-32. Pseudorandom numbers, using awk #!/bin/bash # random2.sh: Returns a pseudorandom number in the range 0 - 1. # Uses the awk rand() function. AWKSCRIPT=' { srand(); print rand() } ' # Command(s) / parameters passed to awk # Note that srand() reseeds awk's random number generator. echo -n "Random number between 0 and 1 = " echo | awk "$AWKSCRIPT" # What happens if you leave out the 'echo'? exit 0 # Exercises: # --------- # 1) Using a loop construct, print out 10 different random numbers. # (Hint: you must reseed the "srand()" function with a different seed #+ in each pass through the loop. What happens if you fail to do this?) # 2) Using an integer multiplier as a scaling factor, generate random numbers #+ in the range between 10 and 100. # 3) Same as exercise #2, above, but generate random integers this time. The date command also lends itself to generating pseudorandom integer sequences. 9.7. The Double-Parentheses Construct Similar to the let command, the (( ... )) construct permits arithmetic expansion and evaluation. In its simplest form, a=$(( 5 + 3 )) would set a to 5 + 3, or 8. However, this double-parentheses construct is also a mechanism for allowing C-style manipulation of variables in Bash, for example, (( var++ )). Example 9-33. C-style manipulation of variables Chapter 9. Variables Revisited 131
- 138. Advanced Bash-Scripting Guide #!/bin/bash # c-vars.sh # Manipulating a variable, C-style, using the (( ... )) construct. echo (( a = 23 )) # Setting a value, C-style, #+ with spaces on both sides of the "=". echo "a (initial value) = $a" # 23 (( a++ )) # Post-increment 'a', C-style. echo "a (after a++) = $a" # 24 (( a-- )) # Post-decrement 'a', C-style. echo "a (after a--) = $a" # 23 (( ++a )) # Pre-increment 'a', C-style. echo "a (after ++a) = $a" # 24 (( --a )) # Pre-decrement 'a', C-style. echo "a (after --a) = $a" # 23 echo ######################################################## # Note that, as in C, pre- and post-decrement operators #+ have different side-effects. n=1; let --n && echo "True" || echo "False" # False n=1; let n-- && echo "True" || echo "False" # True # Thanks, Jeroen Domburg. ######################################################## echo (( t = a<45?7:11 )) # C-style trinary operator. # ^ ^ ^ echo "If a < 45, then t = 7, else t = 11." # a = 23 echo "t = $t " # t = 7 echo # ----------------- # Easter Egg alert! # ----------------- # Chet Ramey seems to have snuck a bunch of undocumented C-style #+ constructs into Bash (actually adapted from ksh, pretty much). # In the Bash docs, Ramey calls (( ... )) shell arithmetic, #+ but it goes far beyond that. # Sorry, Chet, the secret is out. # See also "for" and "while" loops using the (( ... )) construct. # These work only with version 2.04 or later of Bash. exit See also Example 10-12 and Example 8-4. Chapter 9. Variables Revisited 132
- 139. Advanced Bash-Scripting Guide Chapter 9. Variables Revisited 133
- 140. Chapter 10. Loops and Branches What needs this iteration, woman? --Shakespeare, Othello Operations on code blocks are the key to structured and organized shell scripts. Looping and branching constructs provide the tools for accomplishing this. 10.1. Loops A loop is a block of code that iterates [46] a list of commands as long as the loop control condition is true. for loops for arg in [list] This is the basic looping construct. It differs significantly from its C counterpart. for arg in [list] do command(s)... done During each pass through the loop, arg takes on the value of each successive variable in the list. for arg in "$var1" "$var2" "$var3" ... "$varN" # In pass 1 of the loop, arg = $var1 # In pass 2 of the loop, arg = $var2 # In pass 3 of the loop, arg = $var3 # ... # In pass N of the loop, arg = $varN # Arguments in [list] quoted to prevent possible word splitting. The argument list may contain wild cards. If do is on same line as for, there needs to be a semicolon after list. for arg in [list] ; do Example 10-1. Simple for loops #!/bin/bash # Listing the planets. for planet in Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune Pluto do echo $planet # Each planet on a separate line. Chapter 10. Loops and Branches 134
- 141. Advanced Bash-Scripting Guide done echo; echo for planet in "Mercury Venus Earth Mars Jupiter Saturn Uranus Neptune Pluto" # All planets on same line. # Entire 'list' enclosed in quotes creates a single variable. # Why? Whitespace incorporated into the variable. do echo $planet done echo; echo "Whoops! Pluto is no longer a planet!" exit 0 Each [list] element may contain multiple parameters. This is useful when processing parameters in groups. In such cases, use the set command (see Example 14-16) to force parsing of each [list] element and assignment of each component to the positional parameters. Example 10-2. for loop with two parameters in each [list] element #!/bin/bash # Planets revisited. # Associate the name of each planet with its distance from the sun. for planet in "Mercury 36" "Venus 67" "Earth 93" "Mars 142" "Jupiter 483" do set -- $planet # Parses variable "planet" #+ and sets positional parameters. # The "--" prevents nasty surprises if $planet is null or #+ begins with a dash. # May need to save original positional parameters, #+ since they get overwritten. # One way of doing this is to use an array, # original_params=("$@") echo "$1 $2,000,000 miles from the sun" #-------two tabs---concatenate zeroes onto parameter $2 done # (Thanks, S.C., for additional clarification.) exit 0 A variable may supply the [list] in a for loop. Example 10-3. Fileinfo: operating on a file list contained in a variable #!/bin/bash # fileinfo.sh FILES="/usr/sbin/accept /usr/sbin/pwck Chapter 10. Loops and Branches 135
- 142. Advanced Bash-Scripting Guide /usr/sbin/chroot /usr/bin/fakefile /sbin/badblocks /sbin/ypbind" # List of files you are curious about. # Threw in a dummy file, /usr/bin/fakefile. echo for file in $FILES do if [ ! -e "$file" ] # Check if file exists. then echo "$file does not exist."; echo continue # On to next. fi ls -l $file | awk '{ print $8 " file size: " $5 }' # Print 2 fields. whatis `basename $file` # File info. # Note that the whatis database needs to have been set up for this to work. # To do this, as root run /usr/bin/makewhatis. echo done exit 0 If the [list] in a for loop contains wild cards (* and ?) used in filename expansion, then globbing takes place. Example 10-4. Operating on files with a for loop #!/bin/bash # list-glob.sh: Generating [list] in a for-loop, using "globbing" echo for file in * # ^ Bash performs filename expansion #+ on expressions that globbing recognizes. do ls -l "$file" # Lists all files in $PWD (current directory). # Recall that the wild card character "*" matches every filename, #+ however, in "globbing," it doesn't match dot-files. # If the pattern matches no file, it is expanded to itself. # To prevent this, set the nullglob option #+ (shopt -s nullglob). # Thanks, S.C. done echo; echo for file in [jx]* do rm -f $file # Removes only files beginning with "j" or "x" in $PWD. echo "Removed file "$file"". done echo Chapter 10. Loops and Branches 136
- 143. Advanced Bash-Scripting Guide exit 0 Omitting the in [list] part of a for loop causes the loop to operate on $@ -- the positional parameters. A particularly clever illustration of this is Example A-15. See also Example 14-17. Example 10-5. Missing in [list] in a for loop #!/bin/bash # Invoke this script both with and without arguments, #+ and see what happens. for a do echo -n "$a " done # The 'in list' missing, therefore the loop operates on '$@' #+ (command-line argument list, including whitespace). echo exit 0 It is possible to use command substitution to generate the [list] in a for loop. See also Example 15-54, Example 10-10 and Example 15-48. Example 10-6. Generating the [list] in a for loop with command substitution #!/bin/bash # for-loopcmd.sh: for-loop with [list] #+ generated by command substitution. NUMBERS="9 7 3 8 37.53" for number in `echo $NUMBERS` # for number in 9 7 3 8 37.53 do echo -n "$number " done echo exit 0 Here is a somewhat more complex example of using command substitution to create the [list]. Example 10-7. A grep replacement for binary files #!/bin/bash # bin-grep.sh: Locates matching strings in a binary file. # A "grep" replacement for binary files. # Similar effect to "grep -a" E_BADARGS=65 Chapter 10. Loops and Branches 137
- 144. Advanced Bash-Scripting Guide E_NOFILE=66 if [ $# -ne 2 ] then echo "Usage: `basename $0` search_string filename" exit $E_BADARGS fi if [ ! -f "$2" ] then echo "File "$2" does not exist." exit $E_NOFILE fi IFS=$'012' # Per suggestion of Anton Filippov. # was: IFS="n" for word in $( strings "$2" | grep "$1" ) # The "strings" command lists strings in binary files. # Output then piped to "grep", which tests for desired string. do echo $word done # As S.C. points out, lines 23 - 30 could be replaced with the simpler # strings "$2" | grep "$1" | tr -s "$IFS" '[n*]' # Try something like "./bin-grep.sh mem /bin/ls" #+ to exercise this script. exit 0 More of the same. Example 10-8. Listing all users on the system #!/bin/bash # userlist.sh PASSWORD_FILE=/etc/passwd n=1 # User number for name in $(awk 'BEGIN{FS=":"}{print $1}' < "$PASSWORD_FILE" ) # Field separator = : ^^^^^^ # Print first field ^^^^^^^^ # Get input from password file ^^^^^^^^^^^^^^^^^ do echo "USER #$n = $name" let "n += 1" done # USER #1 = root # USER #2 = bin # USER #3 = daemon # ... # USER #30 = bozo exit 0 Chapter 10. Loops and Branches 138
- 145. Advanced Bash-Scripting Guide # Exercise: # -------- # How is it that an ordinary user (or a script run by same) #+ can read /etc/passwd? # Isn't this a security hole? Why or why not? Yet another example of the [list] resulting from command substitution. Example 10-9. Checking all the binaries in a directory for authorship #!/bin/bash # findstring.sh: # Find a particular string in the binaries in a specified directory. directory=/usr/bin/ fstring="Free Software Foundation" # See which files come from the FSF. for file in $( find $directory -type f -name '*' | sort ) do strings -f $file | grep "$fstring" | sed -e "s%$directory%%" # In the "sed" expression, #+ it is necessary to substitute for the normal "/" delimiter #+ because "/" happens to be one of the characters filtered out. # Failure to do so gives an error message. (Try it.) done exit $? # Exercise (easy): # --------------- # Convert this script to take command-line parameters #+ for $directory and $fstring. A final example of [list] / command substitution, but this time the "command" is a function. generate_list () { echo "one two three" } for word in $(generate_list) # Let "word" grab output of function. do echo "$word" done # one # two # three The output of a for loop may be piped to a command or commands. Example 10-10. Listing the symbolic links in a directory #!/bin/bash # symlinks.sh: Lists symbolic links in a directory. directory=${1-`pwd`} Chapter 10. Loops and Branches 139
- 146. Advanced Bash-Scripting Guide # Defaults to current working directory, #+ if not otherwise specified. # Equivalent to code block below. # ---------------------------------------------------------- # ARGS=1 # Expect one command-line argument. # # if [ $# -ne "$ARGS" ] # If not 1 arg... # then # directory=`pwd` # current working directory # else # directory=$1 # fi # ---------------------------------------------------------- echo "symbolic links in directory "$directory"" for file in "$( find $directory -type l )" # -type l = symbolic links do echo "$file" done | sort # Otherwise file list is unsorted. # Strictly speaking, a loop isn't really necessary here, #+ since the output of the "find" command is expanded into a single word. # However, it's easy to understand and illustrative this way. # As Dominik 'Aeneas' Schnitzer points out, #+ failing to quote $( find $directory -type l ) #+ will choke on filenames with embedded whitespace. # containing whitespace. exit 0 # -------------------------------------------------------- # Jean Helou proposes the following alternative: echo "symbolic links in directory "$directory"" # Backup of the current IFS. One can never be too cautious. OLDIFS=$IFS IFS=: for file in $(find $directory -type l -printf "%p$IFS") do # ^^^^^^^^^^^^^^^^ echo "$file" done|sort # And, James "Mike" Conley suggests modifying Helou's code thusly: OLDIFS=$IFS IFS='' # Null IFS means no word breaks for file in $( find $directory -type l ) do echo $file done | sort # This works in the "pathological" case of a directory name having #+ an embedded colon. # "This also fixes the pathological case of the directory name having #+ a colon (or space in earlier example) as well." The stdout of a loop may be redirected to a file, as this slight modification to the previous example shows. Chapter 10. Loops and Branches 140
- 147. Advanced Bash-Scripting Guide Example 10-11. Symbolic links in a directory, saved to a file #!/bin/bash # symlinks.sh: Lists symbolic links in a directory. OUTFILE=symlinks.list # save file directory=${1-`pwd`} # Defaults to current working directory, #+ if not otherwise specified. echo "symbolic links in directory "$directory"" > "$OUTFILE" echo "---------------------------" >> "$OUTFILE" for file in "$( find $directory -type l )" # -type l = symbolic links do echo "$file" done | sort >> "$OUTFILE" # stdout of loop # ^^^^^^^^^^^^^ redirected to save file. exit 0 There is an alternative syntax to a for loop that will look very familiar to C programmers. This requires double parentheses. Example 10-12. A C-style for loop #!/bin/bash # Multiple ways to count up to 10. echo # Standard syntax. for a in 1 2 3 4 5 6 7 8 9 10 do echo -n "$a " done echo; echo # +==========================================+ # Using "seq" ... for a in `seq 10` do echo -n "$a " done echo; echo # +==========================================+ # Using brace expansion ... # Bash, version 3+. for a in {1..10} do echo -n "$a " done Chapter 10. Loops and Branches 141
- 148. Advanced Bash-Scripting Guide echo; echo # +==========================================+ # Now, let's do the same, using C-like syntax. LIMIT=10 for ((a=1; a <= LIMIT ; a++)) # Double parentheses, and "LIMIT" with no "$". do echo -n "$a " done # A construct borrowed from 'ksh93'. echo; echo # +=========================================================================+ # Let's use the C "comma operator" to increment two variables simultaneously. for ((a=1, b=1; a <= LIMIT ; a++, b++)) do # The comma chains together operations. echo -n "$a-$b " done echo; echo exit 0 See also Example 26-16, Example 26-17, and Example A-6. --- Now, a for loop used in a "real-life" context. Example 10-13. Using efax in batch mode #!/bin/bash # Faxing (must have 'efax' package installed). EXPECTED_ARGS=2 E_BADARGS=85 MODEM_PORT="/dev/ttyS2" # May be different on your machine. # ^^^^^ PCMCIA modem card default port. if [ $# -ne $EXPECTED_ARGS ] # Check for proper number of command-line args. then echo "Usage: `basename $0` phone# text-file" exit $E_BADARGS fi if [ ! -f "$2" ] then echo "File $2 is not a text file." # File is not a regular file, or does not exist. exit $E_BADARGS fi Chapter 10. Loops and Branches 142
- 149. Advanced Bash-Scripting Guide fax make $2 # Create fax-formatted files from text files. for file in $(ls $2.0*) # Concatenate the converted files. # Uses wild card (filename "globbing") #+ in variable list. do fil="$fil $file" done efax -d "$MODEM_PORT" -t "T$1" $fil # Finally, do the work. # Trying adding -o1 if above line fails. # As S.C. points out, the for-loop can be eliminated with # efax -d /dev/ttyS2 -o1 -t "T$1" $2.0* #+ but it's not quite as instructive [grin]. exit $? # Also, efax sends diagnostic messages to stdout. while This construct tests for a condition at the top of a loop, and keeps looping as long as that condition is true (returns a 0 exit status). In contrast to a for loop, a while loop finds use in situations where the number of loop repetitions is not known beforehand. while [ condition ] do command(s)... done The bracket construct in a while loop is nothing more than our old friend, the test brackets used in an if/then test. In fact, a while loop can legally use the more versatile double-brackets construct (while [[ condition ]]). As is the case with for loops, placing the do on the same line as the condition test requires a semicolon. while [ condition ] ; do Note that the test brackets are not mandatory in a while loop. See, for example, the getopts construct. Example 10-14. Simple while loop #!/bin/bash var0=0 LIMIT=10 while [ "$var0" -lt "$LIMIT" ] # ^ ^ # Spaces, because these are "test-brackets" . . . do echo -n "$var0 " # -n suppresses newline. # ^ Space, to separate printed out numbers. Chapter 10. Loops and Branches 143
- 150. Advanced Bash-Scripting Guide var0=`expr $var0 + 1` # var0=$(($var0+1)) also works. # var0=$((var0 + 1)) also works. # let "var0 += 1" also works. done # Various other methods also work. echo exit 0 Example 10-15. Another while loop #!/bin/bash echo # Equivalent to: while [ "$var1" != "end" ] # while test "$var1" != "end" do echo "Input variable #1 (end to exit) " read var1 # Not 'read $var1' (why?). echo "variable #1 = $var1" # Need quotes because of "#" . . . # If input is 'end', echoes it here. # Does not test for termination condition until top of loop. echo done exit 0 A while loop may have multiple conditions. Only the final condition determines when the loop terminates. This necessitates a slightly different loop syntax, however. Example 10-16. while loop with multiple conditions #!/bin/bash var1=unset previous=$var1 while echo "previous-variable = $previous" echo previous=$var1 [ "$var1" != end ] # Keeps track of what $var1 was previously. # Four conditions on "while", but only last one controls loop. # The *last* exit status is the one that counts. do echo "Input variable #1 (end to exit) " read var1 echo "variable #1 = $var1" done # Try to figure out how this all works. # It's a wee bit tricky. exit 0 As with a for loop, a while loop may employ C-style syntax by using the double-parentheses construct (see also Example 9-33). Chapter 10. Loops and Branches 144
- 151. Advanced Bash-Scripting Guide Example 10-17. C-style syntax in a while loop #!/bin/bash # wh-loopc.sh: Count to 10 in a "while" loop. LIMIT=10 a=1 while [ "$a" -le $LIMIT ] do echo -n "$a " let "a+=1" done # No surprises, so far. echo; echo # +=================================================================+ # Now, repeat with C-like syntax. ((a = 1)) # a=1 # Double parentheses permit space when setting a variable, as in C. while (( a <= LIMIT )) # Double parentheses, and no "$" preceding variables. do echo -n "$a " ((a += 1)) # let "a+=1" # Yes, indeed. # Double parentheses permit incrementing a variable with C-like syntax. done echo # C programmers can feel right at home in Bash. exit 0 Inside its test brackets, a while loop can call a function. t=0 condition () { ((t++)) if [ $t -lt 5 ] then return 0 # true else return 1 # false fi } while condition # ^^^^^^^^^ # Function call -- four loop iterations. do echo "Still going: t = $t" done # Still going: t = 1 Chapter 10. Loops and Branches 145
- 152. Advanced Bash-Scripting Guide # Still going: t = 2 # Still going: t = 3 # Still going: t = 4 Similar to the if-test construct, a while loop can omit the test brackets. while condition do command(s) ... done By coupling the power of the read command with a while loop, we get the handy while read construct, useful for reading and parsing files. cat $filename | # Supply input from a file. while read line # As long as there is another line to read ... do ... done # =========== Snippet from "sd.sh" example script ========== # while read value # Read one data point at a time. do rt=$(echo "scale=$SC; $rt + $value" | bc) (( ct++ )) done am=$(echo "scale=$SC; $rt / $ct" | bc) echo $am; return $ct # This function "returns" TWO values! # Caution: This little trick will not work if $ct > 255! # To handle a larger number of data points, #+ simply comment out the "return $ct" above. } <"$datafile" # Feed in data file. A while loop may have its stdin redirected to a file by a < at its end. A while loop may have its stdin supplied by a pipe. until This construct tests for a condition at the top of a loop, and keeps looping as long as that condition is false (opposite of while loop). until [ condition-is-true ] do command(s)... done Note that an until loop tests for the terminating condition at the top of the loop, differing from a similar construct in some programming languages. As is the case with for loops, placing the do on the same line as the condition test requires a semicolon. Chapter 10. Loops and Branches 146
- 153. Advanced Bash-Scripting Guide until [ condition-is-true ] ; do Example 10-18. until loop #!/bin/bash END_CONDITION=end until [ "$var1" = "$END_CONDITION" ] # Tests condition here, at top of loop. do echo "Input variable #1 " echo "($END_CONDITION to exit)" read var1 echo "variable #1 = $var1" echo done # ------------------------------------------- # # As with "for" and "while" loops, #+ an "until" loop permits C-like test constructs. LIMIT=10 var=0 until (( var > LIMIT )) do # ^^ ^ ^ ^^ No brackets, no $ prefixing variables. echo -n "$var " (( var++ )) done # 0 1 2 3 4 5 6 7 8 9 10 exit 0 How to choose between a for loop or a while loop or until loop? In C, you would typically use a for loop when the number of loop iterations is known beforehand. With Bash, however, the situation is fuzzier. The Bash for loop is more loosely structured and more flexible than its equivalent in other languages. Therefore, feel free to use whatever type of loop gets the job done in the simplest way. 10.2. Nested Loops A nested loop is a loop within a loop, an inner loop within the body of an outer one. How this works is that the first pass of the outer loop triggers the inner loop, which executes to completion. Then the second pass of the outer loop triggers the inner loop again. This repeats until the outer loop finishes. Of course, a break within either the inner or outer loop would interrupt this process. Example 10-19. Nested Loop #!/bin/bash # nested-loop.sh: Nested "for" loops. outer=1 # Set outer loop counter. Chapter 10. Loops and Branches 147
- 154. Advanced Bash-Scripting Guide # Beginning of outer loop. for a in 1 2 3 4 5 do echo "Pass $outer in outer loop." echo "---------------------" inner=1 # Reset inner loop counter. # =============================================== # Beginning of inner loop. for b in 1 2 3 4 5 do echo "Pass $inner in inner loop." let "inner+=1" # Increment inner loop counter. done # End of inner loop. # =============================================== let "outer+=1" # Increment outer loop counter. echo # Space between output blocks in pass of outer loop. done # End of outer loop. exit 0 See Example 26-11 for an illustration of nested while loops, and Example 26-13 to see a while loop nested inside an until loop. 10.3. Loop Control Tournez cent tours, tournez mille tours, Tournez souvent et tournez toujours . . . --Verlaine, "Chevaux de bois" Commands affecting loop behavior break, continue The break and continue loop control commands [47] correspond exactly to their counterparts in other programming languages. The break command terminates the loop (breaks out of it), while continue causes a jump to the next iteration of the loop, skipping all the remaining commands in that particular loop cycle. Example 10-20. Effects of break and continue in a loop #!/bin/bash LIMIT=19 # Upper limit echo echo "Printing Numbers 1 through 20 (but not 3 and 11)." a=0 while [ $a -le "$LIMIT" ] Chapter 10. Loops and Branches 148
- 155. Advanced Bash-Scripting Guide do a=$(($a+1)) if [ "$a" -eq 3 ] || [ "$a" -eq 11 ] # Excludes 3 and 11. then continue # Skip rest of this particular loop iteration. fi echo -n "$a " # This will not execute for 3 and 11. done # Exercise: # Why does the loop print up to 20? echo; echo echo Printing Numbers 1 through 20, but something happens after 2. ################################################################## # Same loop, but substituting 'break' for 'continue'. a=0 while [ "$a" -le "$LIMIT" ] do a=$(($a+1)) if [ "$a" -gt 2 ] then break # Skip entire rest of loop. fi echo -n "$a " done echo; echo; echo exit 0 The break command may optionally take a parameter. A plain break terminates only the innermost loop in which it is embedded, but a break N breaks out of N levels of loop. Example 10-21. Breaking out of multiple loop levels #!/bin/bash # break-levels.sh: Breaking out of loops. # "break N" breaks out of N level loops. for outerloop in 1 2 3 4 5 do echo -n "Group $outerloop: " # -------------------------------------------------------- for innerloop in 1 2 3 4 5 do echo -n "$innerloop " Chapter 10. Loops and Branches 149
- 156. Advanced Bash-Scripting Guide if [ "$innerloop" -eq 3 ] then break # Try break 2 to see what happens. # ("Breaks" out of both inner and outer loops.) fi done # -------------------------------------------------------- echo done echo exit 0 The continue command, similar to break, optionally takes a parameter. A plain continue cuts short the current iteration within its loop and begins the next. A continue N terminates all remaining iterations at its loop level and continues with the next iteration at the loop, N levels above. Example 10-22. Continuing at a higher loop level #!/bin/bash # The "continue N" command, continuing at the Nth level loop. for outer in I II III IV V # outer loop do echo; echo -n "Group $outer: " # -------------------------------------------------------------------- for inner in 1 2 3 4 5 6 7 8 9 10 # inner loop do if [[ "$inner" -eq 7 && "$outer" = "III" ]] then continue 2 # Continue at loop on 2nd level, that is "outer loop". # Replace above line with a simple "continue" # to see normal loop behavior. fi echo -n "$inner " # 7 8 9 10 will not echo on "Group III." done # -------------------------------------------------------------------- done echo; echo # Exercise: # Come up with a meaningful use for "continue N" in a script. exit 0 Example 10-23. Using continue N in an actual task # Albert Reiner gives an example of how to use "continue N": # --------------------------------------------------------- # Suppose I have a large number of jobs that need to be run, with #+ any data that is to be treated in files of a given name pattern in a Chapter 10. Loops and Branches 150
- 157. Advanced Bash-Scripting Guide #+ directory. There are several machines that access this directory, and #+ I want to distribute the work over these different boxen. Then I #+ usually nohup something like the following on every box: while true do for n in .iso.* do [ "$n" = ".iso.opts" ] && continue beta=${n#.iso.} [ -r .Iso.$beta ] && continue [ -r .lock.$beta ] && sleep 10 && continue lockfile -r0 .lock.$beta || continue echo -n "$beta: " `date` run-isotherm $beta date ls -alF .Iso.$beta [ -r .Iso.$beta ] && rm -f .lock.$beta continue 2 done break done # The details, in particular the sleep N, are particular to my #+ application, but the general pattern is: while true do for job in {pattern} do {job already done or running} && continue {mark job as running, do job, mark job as done} continue 2 done break # Or something like `sleep 600' to avoid termination. done # This way the script will stop only when there are no more jobs to do #+ (including jobs that were added during runtime). Through the use #+ of appropriate lockfiles it can be run on several machines #+ concurrently without duplication of calculations [which run a couple #+ of hours in my case, so I really want to avoid this]. Also, as search #+ always starts again from the beginning, one can encode priorities in #+ the file names. Of course, one could also do this without `continue 2', #+ but then one would have to actually check whether or not some job #+ was done (so that we should immediately look for the next job) or not #+ (in which case we terminate or sleep for a long time before checking #+ for a new job). The continue N construct is difficult to understand and tricky to use in any meaningful context. It is probably best avoided. 10.4. Testing and Branching The case and select constructs are technically not loops, since they do not iterate the execution of a code block. Like loops, however, they direct program flow according to conditions at the top or bottom of the block. Chapter 10. Loops and Branches 151
- 158. Advanced Bash-Scripting Guide Controlling program flow in a code block case (in) / esac The case construct is the shell scripting analog to switch in C/C++. It permits branching to one of a number of code blocks, depending on condition tests. It serves as a kind of shorthand for multiple if/then/else statements and is an appropriate tool for creating menus. case "$variable" in "$condition1" ) command... ;; "$condition2" ) command... ;; esac ◊ Quoting the variables is not mandatory, since word splitting does not take place. ◊ Each test line ends with a right paren ). ◊ Each condition block ends with a double semicolon ;;. ◊ If a condition tests true, then the associated commands execute and the case block terminates. ◊ The entire case block ends with an esac (case spelled backwards). Example 10-24. Using case #!/bin/bash # Testing ranges of characters. echo; echo "Hit a key, then hit return." read Keypress case "$Keypress" in [[:lower:]] ) echo "Lowercase letter";; [[:upper:]] ) echo "Uppercase letter";; [0-9] ) echo "Digit";; * ) echo "Punctuation, whitespace, or other";; esac # Allows ranges of characters in [square brackets], #+ or POSIX ranges in [[double square brackets. # In the first version of this example, #+ the tests for lowercase and uppercase characters were #+ [a-z] and [A-Z]. # This no longer works in certain locales and/or Linux distros. # POSIX is more portable. # Thanks to Frank Wang for pointing this out. # Exercise: # -------- # As the script stands, it accepts a single keystroke, then terminates. Chapter 10. Loops and Branches 152
- 159. Advanced Bash-Scripting Guide # Change the script so it accepts repeated input, #+ reports on each keystroke, and terminates only when "X" is hit. # Hint: enclose everything in a "while" loop. exit 0 Example 10-25. Creating menus using case #!/bin/bash # Crude address database clear # Clear the screen. echo " Contact List" echo " ------- ----" echo "Choose one of the following persons:" echo echo "[E]vans, Roland" echo "[J]ones, Mildred" echo "[S]mith, Julie" echo "[Z]ane, Morris" echo read person case "$person" in # Note variable is quoted. "E" | "e" ) # Accept upper or lowercase input. echo echo "Roland Evans" echo "4321 Flash Dr." echo "Hardscrabble, CO 80753" echo "(303) 734-9874" echo "(303) 734-9892 fax" echo "revans@zzy.net" echo "Business partner & old friend" ;; # Note double semicolon to terminate each option. "J" | "j" ) echo echo "Mildred Jones" echo "249 E. 7th St., Apt. 19" echo "New York, NY 10009" echo "(212) 533-2814" echo "(212) 533-9972 fax" echo "milliej@loisaida.com" echo "Ex-girlfriend" echo "Birthday: Feb. 11" ;; # Add info for Smith & Zane later. * ) # Default option. # Empty input (hitting RETURN) fits here, too. echo echo "Not yet in database." Chapter 10. Loops and Branches 153
- 160. Advanced Bash-Scripting Guide ;; esac echo # Exercise: # -------- # Change the script so it accepts multiple inputs, #+ instead of terminating after displaying just one address. exit 0 An exceptionally clever use of case involves testing for command-line parameters. #! /bin/bash case "$1" in "") echo "Usage: ${0##*/} <filename>"; exit $E_PARAM;; # No command-line parameters, # or first parameter empty. # Note that ${0##*/} is ${var##pattern} param substitution. # Net result is $0. -*) FILENAME=./$1;; # If filename passed as argument ($1) #+ starts with a dash, #+ replace it with ./$1 #+ so further commands don't interpret it #+ as an option. * ) FILENAME=$1;; # Otherwise, $1. esac Here is an more straightforward example of command-line parameter handling: #! /bin/bash while [ $# -gt 0 ]; do # Until you run out of parameters . . . case "$1" in -d|--debug) # "-d" or "--debug" parameter? DEBUG=1 ;; -c|--conf) CONFFILE="$2" shift if [ ! -f $CONFFILE ]; then echo "Error: Supplied file doesn't exist!" exit $E_CONFFILE # File not found error. fi ;; esac shift # Check next set of parameters. done # From Stefano Falsetto's "Log2Rot" script, #+ part of his "rottlog" package. # Used with permission. Example 10-26. Using command substitution to generate the case variable Chapter 10. Loops and Branches 154
- 161. Advanced Bash-Scripting Guide #!/bin/bash # case-cmd.sh: Using command substitution to generate a "case" variable. case $( arch ) in # "arch" returns machine architecture. # Equivalent to 'uname -m' ... i386 ) echo "80386-based machine";; i486 ) echo "80486-based machine";; i586 ) echo "Pentium-based machine";; i686 ) echo "Pentium2+-based machine";; * ) echo "Other type of machine";; esac exit 0 A case construct can filter strings for globbing patterns. Example 10-27. Simple string matching #!/bin/bash # match-string.sh: Simple string matching. match_string () { # Exact string match. MATCH=0 E_NOMATCH=90 PARAMS=2 # Function requires 2 arguments. E_BAD_PARAMS=91 [ $# -eq $PARAMS ] || return $E_BAD_PARAMS case "$1" in "$2") return $MATCH;; * ) return $E_NOMATCH;; esac } a=one b=two c=three d=two match_string $a # wrong number of parameters echo $? # 91 match_string $a $b # no match echo $? # 90 match_string $b $d # match echo $? # 0 exit 0 Example 10-28. Checking for alphabetic input Chapter 10. Loops and Branches 155
- 162. Advanced Bash-Scripting Guide #!/bin/bash # isalpha.sh: Using a "case" structure to filter a string. SUCCESS=0 FAILURE=-1 isalpha () # Tests whether *first character* of input string is alphabetic. { if [ -z "$1" ] # No argument passed? then return $FAILURE fi case "$1" in [a-zA-Z]*) return $SUCCESS;; # Begins with a letter? * ) return $FAILURE;; esac } # Compare this with "isalpha ()" function in C. isalpha2 () # Tests whether *entire string* is alphabetic. { [ $# -eq 1 ] || return $FAILURE case $1 in *[!a-zA-Z]*|"") return $FAILURE;; *) return $SUCCESS;; esac } isdigit () # Tests whether *entire string* is numerical. { # In other words, tests for integer variable. [ $# -eq 1 ] || return $FAILURE case $1 in *[!0-9]*|"") return $FAILURE;; *) return $SUCCESS;; esac } check_var () # Front-end to isalpha (). { if isalpha "$@" then echo ""$*" begins with an alpha character." if isalpha2 "$@" then # No point in testing if first char is non-alpha. echo ""$*" contains only alpha characters." else echo ""$*" contains at least one non-alpha character." fi else echo ""$*" begins with a non-alpha character." # Also "non-alpha" if no argument passed. fi echo } Chapter 10. Loops and Branches 156
- 163. Advanced Bash-Scripting Guide digit_check () # Front-end to isdigit (). { if isdigit "$@" then echo ""$*" contains only digits [0 - 9]." else echo ""$*" has at least one non-digit character." fi echo } a=23skidoo b=H3llo c=-What? d=What? e=`echo $b` # Command substitution. f=AbcDef g=27234 h=27a34 i=27.34 check_var $a check_var $b check_var $c check_var $d check_var $e check_var $f check_var # No argument passed, so what happens? # digit_check $g digit_check $h digit_check $i exit 0 # Script improved by S.C. # Exercise: # -------- # Write an 'isfloat ()' function that tests for floating point numbers. # Hint: The function duplicates 'isdigit ()', #+ but adds a test for a mandatory decimal point. select The select construct, adopted from the Korn Shell, is yet another tool for building menus. select variable [in list] do command... break done This prompts the user to enter one of the choices presented in the variable list. Note that select uses the $PS3 prompt (#? ) by default, but this may be changed. Example 10-29. Creating menus using select Chapter 10. Loops and Branches 157
- 164. Advanced Bash-Scripting Guide #!/bin/bash PS3='Choose your favorite vegetable: ' # Sets the prompt string. # Otherwise it defaults to #? . echo select vegetable in "beans" "carrots" "potatoes" "onions" "rutabagas" do echo echo "Your favorite veggie is $vegetable." echo "Yuck!" echo break # What happens if there is no 'break' here? done exit # Exercise: # -------- # Fix this script to accept user input not specified in #+ the "select" statement. # For example, if the user inputs "peas," #+ The script would respond "Sorry. That is not on the menu." If in list is omitted, then select uses the list of command line arguments ($@) passed to the script or to the function in which the select construct is embedded. Compare this to the behavior of a for variable [in list] construct with the in list omitted. Example 10-30. Creating menus using select in a function #!/bin/bash PS3='Choose your favorite vegetable: ' echo choice_of() { select vegetable # [in list] omitted, so 'select' uses arguments passed to function. do echo echo "Your favorite veggie is $vegetable." echo "Yuck!" echo break done } choice_of beans rice carrots radishes tomatoes spinach # $1 $2 $3 $4 $5 $6 # passed to choice_of() function Chapter 10. Loops and Branches 158
- 165. Advanced Bash-Scripting Guide exit 0 See also Example 34-3. Chapter 10. Loops and Branches 159
- 166. Chapter 11. Command Substitution Command substitution reassigns the output of a command [48] or even multiple commands; it literally plugs the command output into another context. [49] The classic form of command substitution uses backquotes (`...`). Commands within backquotes (backticks) generate command-line text. script_name=`basename $0` echo "The name of this script is $script_name." The output of commands can be used as arguments to another command, to set a variable, and even for generating the argument list in a for loop. rm `cat filename` # "filename" contains a list of files to delete. # # S. C. points out that "arg list too long" error might result. # Better is xargs rm -- < filename # ( -- covers those cases where "filename" begins with a "-" ) textfile_listing=`ls *.txt` # Variable contains names of all *.txt files in current working directory. echo $textfile_listing textfile_listing2=$(ls *.txt) # The alternative form of command substitution. echo $textfile_listing2 # Same result. # A possible problem with putting a list of files into a single string # is that a newline may creep in. # # A safer way to assign a list of files to a parameter is with an array. # shopt -s nullglob # If no match, filename expands to nothing. # textfile_listing=( *.txt ) # # Thanks, S.C. Command substitution invokes a subshell. Command substitution may result in word splitting. COMMAND `echo a b` # 2 args: a and b COMMAND "`echo a b`" # 1 arg: "a b" COMMAND `echo` # no arg COMMAND "`echo`" # one empty arg # Thanks, S.C. Even when there is no word splitting, command substitution can remove trailing newlines. # cd "`pwd`" # This should always work. # However... Chapter 11. Command Substitution 160
- 167. Advanced Bash-Scripting Guide mkdir 'dir with trailing newline ' cd 'dir with trailing newline ' cd "`pwd`" # Error message: # bash: cd: /tmp/file with trailing newline: No such file or directory cd "$PWD" # Works fine. old_tty_setting=$(stty -g) # Save old terminal setting. echo "Hit a key " stty -icanon -echo # Disable "canonical" mode for terminal. # Also, disable *local* echo. key=$(dd bs=1 count=1 2> /dev/null) # Using 'dd' to get a keypress. stty "$old_tty_setting" # Restore old setting. echo "You hit ${#key} key." # ${#variable} = number of characters in $variable # # Hit any key except RETURN, and the output is "You hit 1 key." # Hit RETURN, and it's "You hit 0 key." # The newline gets eaten in the command substitution. Thanks, S.C. Using echo to output an unquoted variable set with command substitution removes trailing newlines characters from the output of the reassigned command(s). This can cause unpleasant surprises. dir_listing=`ls -l` echo $dir_listing # unquoted # Expecting a nicely ordered directory listing. # However, what you get is: # total 3 -rw-rw-r-- 1 bozo bozo 30 May 13 17:15 1.txt -rw-rw-r-- 1 bozo # bozo 51 May 15 20:57 t2.sh -rwxr-xr-x 1 bozo bozo 217 Mar 5 21:13 wi.sh # The newlines disappeared. echo "$dir_listing" # quoted # -rw-rw-r-- 1 bozo 30 May 13 17:15 1.txt # -rw-rw-r-- 1 bozo 51 May 15 20:57 t2.sh # -rwxr-xr-x 1 bozo 217 Mar 5 21:13 wi.sh Command substitution even permits setting a variable to the contents of a file, using either redirection or the cat command. variable1=`<file1` # Set "variable1" to contents of "file1". variable2=`cat file2` # Set "variable2" to contents of "file2". # This, however, forks a new process, #+ so the line of code executes slower than the above version. # Note that the variables may contain embedded whitespace, #+ or even (horrors), control characters. Chapter 11. Command Substitution 161
- 168. Advanced Bash-Scripting Guide # It is not necessary to explicitly assign a variable. echo "` <$0`" # Echoes the script itself to stdout. # Excerpts from system file, /etc/rc.d/rc.sysinit #+ (on a Red Hat Linux installation) if [ -f /fsckoptions ]; then fsckoptions=`cat /fsckoptions` ... fi # # if [ -e "/proc/ide/${disk[$device]}/media" ] ; then hdmedia=`cat /proc/ide/${disk[$device]}/media` ... fi # # if [ ! -n "`uname -r | grep -- "-"`" ]; then ktag="`cat /proc/version`" ... fi # # if [ $usb = "1" ]; then sleep 5 mouseoutput=`cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=02"` kbdoutput=`cat /proc/bus/usb/devices 2>/dev/null|grep -E "^I.*Cls=03.*Prot=01"` ... fi Do not set a variable to the contents of a long text file unless you have a very good reason for doing so. Do not set a variable to the contents of a binary file, even as a joke. Example 11-1. Stupid script tricks #!/bin/bash # stupid-script-tricks.sh: Don't try this at home, folks. # From "Stupid Script Tricks," Volume I. dangerous_variable=`cat /boot/vmlinuz` # The compressed Linux kernel itself. echo "string-length of $dangerous_variable = ${#dangerous_variable}" # string-length of $dangerous_variable = 794151 # (Does not give same count as 'wc -c /boot/vmlinuz'.) # echo "$dangerous_variable" # Don't try this! It would hang the script. # The document author is aware of no useful applications for #+ setting a variable to the contents of a binary file. exit 0 Chapter 11. Command Substitution 162
- 169. Advanced Bash-Scripting Guide Notice that a buffer overrun does not occur. This is one instance where an interpreted language, such as Bash, provides more protection from programmer mistakes than a compiled language. Command substitution permits setting a variable to the output of a loop. The key to this is grabbing the output of an echo command within the loop. Example 11-2. Generating a variable from a loop #!/bin/bash # csubloop.sh: Setting a variable to the output of a loop. variable1=`for i in 1 2 3 4 5 do echo -n "$i" # The 'echo' command is critical done` #+ to command substitution here. echo "variable1 = $variable1" # variable1 = 12345 i=0 variable2=`while [ "$i" -lt 10 ] do echo -n "$i" # Again, the necessary 'echo'. let "i += 1" # Increment. done` echo "variable2 = $variable2" # variable2 = 0123456789 # Demonstrates that it's possible to embed a loop #+ within a variable declaration. exit 0 Command substitution makes it possible to extend the toolset available to Bash. It is simply a matter of writing a program or script that outputs to stdout (like a well-behaved UNIX tool should) and assigning that output to a variable. #include <stdio.h> /* "Hello, world." C program */ int main() { printf( "Hello, world." ); return (0); } bash$ gcc -o hello hello.c #!/bin/bash # hello.sh greeting=`./hello` echo $greeting Chapter 11. Command Substitution 163
- 170. Advanced Bash-Scripting Guide bash$ sh hello.sh Hello, world. The $(...) form has superseded backticks for command substitution. output=$(sed -n /"$1"/p $file) # From "grp.sh" example. # Setting a variable to the contents of a text file. File_contents1=$(cat $file1) File_contents2=$(<$file2) # Bash permits this also. The $(...) form of command substitution treats a double backslash in a different way than `...`. bash$ echo `echo ` bash$ echo $(echo ) The $(...) form of command substitution permits nesting. [50] word_count=$( wc -w $(echo * | awk '{print $8}') ) Or, for something a bit more elaborate . . . Example 11-3. Finding anagrams #!/bin/bash # agram2.sh # Example of nested command substitution. # Uses "anagram" utility #+ that is part of the author's "yawl" word list package. # http://ibiblio.org/pub/Linux/libs/yawl-0.3.2.tar.gz # http://bash.neuralshortcircuit.com/yawl-0.3.2.tar.gz E_NOARGS=66 E_BADARG=67 MINLEN=7 if [ -z "$1" ] then echo "Usage $0 LETTERSET" exit $E_NOARGS # Script needs a command-line argument. elif [ ${#1} -lt $MINLEN ] then echo "Argument must have at least $MINLEN letters." exit $E_BADARG fi FILTER='.......' # Must have at least 7 letters. # 1234567 Anagrams=( $(echo $(anagram $1 | grep $FILTER) ) ) # $( $( nested command sub. ) ) Chapter 11. Command Substitution 164
- 171. Advanced Bash-Scripting Guide # ( array assignment ) echo echo "${#Anagrams[*]} 7+ letter anagrams found" echo echo ${Anagrams[0]} # First anagram. echo ${Anagrams[1]} # Second anagram. # Etc. # echo "${Anagrams[*]}" # To list all the anagrams in a single line . . . # Look ahead to the "Arrays" chapter for enlightenment on #+ what's going on here. # See also the agram.sh script for an example of anagram finding. exit $? Examples of command substitution in shell scripts: 1. Example 10-7 2. Example 10-26 3. Example 9-31 4. Example 15-3 5. Example 15-22 6. Example 15-17 7. Example 15-54 8. Example 10-13 9. Example 10-10 10. Example 15-32 11. Example 19-8 12. Example A-16 13. Example 27-3 14. Example 15-47 15. Example 15-48 16. Example 15-49 Chapter 11. Command Substitution 165
- 172. Chapter 12. Arithmetic Expansion Arithmetic expansion provides a powerful tool for performing (integer) arithmetic operations in scripts. Translating a string into a numerical expression is relatively straightforward using backticks, double parentheses, or let. Variations Arithmetic expansion with backticks (often used in conjunction with expr) z=`expr $z + 3` # The 'expr' command performs the expansion. Arithmetic expansion with double parentheses, and using let The use of backticks (backquotes) in arithmetic expansion has been superseded by double parentheses -- ((...)) and $((...)) -- and also by the very convenient let construction. z=$(($z+3)) z=$((z+3)) # Also correct. # Within double parentheses, #+ parameter dereferencing #+ is optional. # $((EXPRESSION)) is arithmetic expansion. # Not to be confused with #+ command substitution. # You may also use operations within double parentheses without assignment. n=0 echo "n = $n" # n = 0 (( n += 1 )) # Increment. # (( $n += 1 )) is incorrect! echo "n = $n" # n = 1 let z=z+3 let "z += 3" # Quotes permit the use of spaces in variable assignment. # The 'let' operator actually performs arithmetic evaluation, #+ rather than expansion. Examples of arithmetic expansion in scripts: 1. Example 15-9 2. Example 10-14 3. Example 26-1 4. Example 26-11 5. Example A-16 Chapter 12. Arithmetic Expansion 166
- 173. Chapter 13. Recess Time This bizarre little intermission gives the reader a chance to relax and maybe laugh a bit. Fellow Linux user, greetings! You are reading something which will bring you luck and good fortune. Just e-mail a copy of this document to 10 of your friends. Before making the copies, send a 100-line Bash script to the first person on the list at the bottom of this letter. Then delete their name and add yours to the bottom of the list. Don't break the chain! Make the copies within 48 hours. Wilfred P. of Brooklyn failed to send out his ten copies and woke the next morning to find his job description changed to "COBOL programmer." Howard L. of Newport News sent out his ten copies and within a month had enough hardware to build a 100-node Beowulf cluster dedicated to playing Tuxracer. Amelia V. of Chicago laughed at this letter and broke the chain. Shortly thereafter, a fire broke out in her terminal and she now spends her days writing documentation for MS Windows. Don't break the chain! Send out your ten copies today! Courtesy 'NIX "fortune cookies", with some alterations and many apologies Chapter 13. Recess Time 167
- 174. Part 4. Commands Mastering the commands on your Linux machine is an indispensable prelude to writing effective shell scripts. This section covers the following commands: • . (See also source) • ac • adduser • agetty • agrep • ar • arch • at • autoload • awk (See also Using awk for math operations) • badblocks • banner • basename • batch • bc • bg • bind • bison • builtin • bzgrep • bzip2 • cal • caller • cat • cd • chattr • chfn • chgrp • chkconfig • chmod • chown • chroot • cksum • clear • clock • cmp • col • colrm • column • comm • command • compgen Part 4. Commands 168
- 175. Advanced Bash-Scripting Guide • complete • compress • coproc • cp • cpio • cron • crypt • csplit • cu • cut • date • dc • dd • debugfs • declare • depmod • df • dialog • diff • diff3 • diffstat • dig • dirname • dirs • disown • dmesg • doexec • dos2unix • du • dump • dumpe2fs • e2fsck • echo • egrep • enable • enscript • env • eqn • eval • exec • exit (Related topic: exit status) • expand • export • expr • factor • false • fdformat • fdisk • fg • fgrep • file Part 4. Commands 169
- 176. Advanced Bash-Scripting Guide • find • finger • flex • flock • fmt • fold • free • fsck • ftp • fuser • getfacl • getopt • getopts • gettext • getty • gnome-mount • grep • groff • groupmod • groups (Related topic: the $GROUPS variable) • gs • gzip • halt • hash • hdparm • head • help • hexdump • host • hostid • hostname (Related topic: the $HOSTNAME variable) • hwclock • iconv • id (Related topic: the $UID variable) • ifconfig • info • infocmp • init • insmod • install • ip • ipcalc • iwconfig • jobs • join • jot • kill • killall • last • lastcomm • lastlog Part 4. Commands 170
- 177. Advanced Bash-Scripting Guide • ldd • less • let • lex • lid • ln • locate • lockfile • logger • logname • logout • logrotate • look • losetup • lp • ls • lsdev • lsmod • lsof • lspci • lsusb • ltrace • lynx • lzcat • lzma • m4 • mail • mailstats • mailto • make • MAKEDEV • man • mapfile • mcookie • md5sum • merge • mesg • mimencode • mkbootdisk • mkdir • mke2fs • mkfifo • mkisofs • mknod • mkswap • mktemp • mmencode • modinfo • modprobe • more • mount Part 4. Commands 171
- 178. Advanced Bash-Scripting Guide • msgfmt • mv • nc • netconfig • netstat • newgrp • nice • nl • nm • nmap • nohup • nslookup • objdump • od • openssl • passwd • paste • patch (Related topic: diff) • pathchk • pax • pgrep • pidof • ping • pkill • popd • pr • printenv • printf • procinfo • ps • pstree • ptx • pushd • pwd (Related topic: the $PWD variable) • quota • rcp • rdev • rdist • read • readelf • readlink • readonly • reboot • recode • renice • reset • resize • restore • rev • rlogin • rm Part 4. Commands 172
- 179. Advanced Bash-Scripting Guide • rmdir • rmmod • route • rpm • rpm2cpio • rsh • rsync • runlevel • run-parts • rx • rz • sar • scp • script • sdiff • sed • seq • service • set • setfacl • setquota • setserial • setterm • sha1sum • shar • shopt • shred • shutdown • size • skill • sleep • slocate • snice • sort • source • sox • split • sq • ssh • stat • strace • strings • strip • stty • su • sudo • sum • suspend • swapoff • swapon • sx Part 4. Commands 173
- 180. Advanced Bash-Scripting Guide • sync • sz • tac • tail • tar • tbl • tcpdump • tee • telinit • telnet • Tex • texexec • time • times • tmpwatch • top • touch • tput • tr • traceroute • true • tset • tsort • tty • tune2fs • type • typeset • ulimit • umask • umount • uname • unarc • unarj • uncompress • unexpand • uniq • units • unlzma • unrar • unset • unsq • unzip • uptime • usbmodules • useradd • userdel • usermod • users • usleep • uucp • uudecode Part 4. Commands 174
- 181. Advanced Bash-Scripting Guide • uuencode • uux • vacation • vdir • vmstat • vrfy •w • wait • wall • watch • wc • wget • whatis • whereis • which • who • whoami • whois • write • xargs • yacc • yes • zcat • zdiff • zdump • zegrep • zfgrep • zgrep • zip Table of Contents 14. Internal Commands and Builtins 14.1. Job Control Commands 15. External Filters, Programs and Commands 15.1. Basic Commands 15.2. Complex Commands 15.3. Time / Date Commands 15.4. Text Processing Commands 15.5. File and Archiving Commands 15.6. Communications Commands 15.7. Terminal Control Commands 15.8. Math Commands 15.9. Miscellaneous Commands 16. System and Administrative Commands 16.1. Analyzing a System Script Part 4. Commands 175
- 182. Chapter 14. Internal Commands and Builtins A builtin is a command contained within the Bash tool set, literally built in. This is either for performance reasons -- builtins execute faster than external commands, which usually require forking off [51] a separate process -- or because a particular builtin needs direct access to the shell internals. When a command or the shell itself initiates (or spawns) a new subprocess to carry out a task, this is called forking. This new process is the child, and the process that forked it off is the parent. While the child process is doing its work, the parent process is still executing. Note that while a parent process gets the process ID of the child process, and can thus pass arguments to it, the reverse is not true. This can create problems that are subtle and hard to track down. Example 14-1. A script that spawns multiple instances of itself #!/bin/bash # spawn.sh PIDS=$(pidof sh $0) # Process IDs of the various instances of this script. P_array=( $PIDS ) # Put them in an array (why?). echo $PIDS # Show process IDs of parent and child processes. let "instances = ${#P_array[*]} - 1" # Count elements, less 1. # Why subtract 1? echo "$instances instance(s) of this script running." echo "[Hit Ctl-C to exit.]"; echo sleep 1 # Wait. sh $0 # Play it again, Sam. exit 0 # Not necessary; script will never get to here. # Why not? # After exiting with a Ctl-C, #+ do all the spawned instances of the script die? # If so, why? # Note: # ---- # Be careful not to run this script too long. # It will eventually eat up too many system resources. # Is having a script spawn multiple instances of itself #+ an advisable scripting technique. # Why or why not? Generally, a Bash builtin does not fork a subprocess when it executes within a script. An external system command or filter in a script usually will fork a subprocess. A builtin may be a synonym to a system command of the same name, but Bash reimplements it internally. For example, the Bash echo command is not the same as /bin/echo, although their behavior is almost identical. Chapter 14. Internal Commands and Builtins 176
- 183. Advanced Bash-Scripting Guide #!/bin/bash echo "This line uses the "echo" builtin." /bin/echo "This line uses the /bin/echo system command." A keyword is a reserved word, token or operator. Keywords have a special meaning to the shell, and indeed are the building blocks of the shell's syntax. As examples, for, while, do, and ! are keywords. Similar to a builtin, a keyword is hard-coded into Bash, but unlike a builtin, a keyword is not in itself a command, but a subunit of a command construct. [52] I/O echo prints (to stdout) an expression or variable (see Example 4-1). echo Hello echo $a An echo requires the -e option to print escaped characters. See Example 5-2. Normally, each echo command prints a terminal newline, but the -n option suppresses this. An echo can be used to feed a sequence of commands down a pipe. if echo "$VAR" | grep -q txt # if [[ $VAR = *txt* ]] then echo "$VAR contains the substring sequence "txt"" fi An echo, in combination with command substitution can set a variable. a=`echo "HELLO" | tr A-Z a-z` See also Example 15-22, Example 15-3, Example 15-47, and Example 15-48. Be aware that echo `command` deletes any linefeeds that the output of command generates. The $IFS (internal field separator) variable normally contains n (linefeed) as one of its set of whitespace characters. Bash therefore splits the output of command at linefeeds into arguments to echo. Then echo outputs these arguments, separated by spaces. bash$ ls -l /usr/share/apps/kjezz/sounds -rw-r--r-- 1 root root 1407 Nov 7 2000 reflect.au -rw-r--r-- 1 root root 362 Nov 7 2000 seconds.au bash$ echo `ls -l /usr/share/apps/kjezz/sounds` total 40 -rw-r--r-- 1 root root 716 Nov 7 2000 reflect.au -rw-r--r-- 1 root root ... So, how can we embed a linefeed within an echoed character string? # Embedding a linefeed? echo "Why doesn't this string n split on two lines?" # Doesn't split. Chapter 14. Internal Commands and Builtins 177
- 184. Advanced Bash-Scripting Guide # Let's try something else. echo echo $"A line of text containing a linefeed." # Prints as two distinct lines (embedded linefeed). # But, is the "$" variable prefix really necessary? echo echo "This string splits on two lines." # No, the "$" is not needed. echo echo "---------------" echo echo -n $"Another line of text containing a linefeed." # Prints as two distinct lines (embedded linefeed). # Even the -n option fails to suppress the linefeed here. echo echo echo "---------------" echo echo # However, the following doesn't work as expected. # Why not? Hint: Assignment to a variable. string1=$"Yet another line of text containing a linefeed (maybe)." echo $string1 # Yet another line of text containing a linefeed (maybe). # ^ # Linefeed becomes a space. # Thanks, Steve Parker, for pointing this out. This command is a shell builtin, and not the same as /bin/echo, although its behavior is similar. bash$ type -a echo echo is a shell builtin echo is /bin/echo printf The printf, formatted print, command is an enhanced echo. It is a limited variant of the C language printf() library function, and its syntax is somewhat different. printf format-string... parameter... This is the Bash builtin version of the /bin/printf or /usr/bin/printf command. See the printf manpage (of the system command) for in-depth coverage. Chapter 14. Internal Commands and Builtins 178
- 185. Advanced Bash-Scripting Guide Older versions of Bash may not support printf. Example 14-2. printf in action #!/bin/bash # printf demo declare -r PI=3.14159265358979 # Read-only variable, i.e., a constant. declare -r DecimalConstant=31373 Message1="Greetings," Message2="Earthling." echo printf "Pi to 2 decimal places = %1.2f" $PI echo printf "Pi to 9 decimal places = %1.9f" $PI # It even rounds off correctly. printf "n" # Prints a line feed, # Equivalent to 'echo' . . . printf "Constant = t%dn" $DecimalConstant # Inserts tab (t). printf "%s %s n" $Message1 $Message2 echo # ==========================================# # Simulation of C function, sprintf(). # Loading a variable with a formatted string. echo Pi12=$(printf "%1.12f" $PI) echo "Pi to 12 decimal places = $Pi12" # Roundoff error! Msg=`printf "%s %s n" $Message1 $Message2` echo $Msg; echo $Msg # As it happens, the 'sprintf' function can now be accessed #+ as a loadable module to Bash, #+ but this is not portable. exit 0 Formatting error messages is a useful application of printf E_BADDIR=85 var=nonexistent_directory error() { printf "$@" >&2 # Formats positional params passed, and sends them to stderr. echo exit $E_BADDIR } cd $var || error $"Can't cd to %s." "$var" Chapter 14. Internal Commands and Builtins 179
- 186. Advanced Bash-Scripting Guide # Thanks, S.C. See also Example 33-15. read "Reads" the value of a variable from stdin, that is, interactively fetches input from the keyboard. The -a option lets read get array variables (see Example 26-6). Example 14-3. Variable assignment, using read #!/bin/bash # "Reading" variables. echo -n "Enter the value of variable 'var1': " # The -n option to echo suppresses newline. read var1 # Note no '$' in front of var1, since it is being set. echo "var1 = $var1" echo # A single 'read' statement can set multiple variables. echo -n "Enter the values of variables 'var2' and 'var3' " echo =n "(separated by a space or tab): " read var2 var3 echo "var2 = $var2 var3 = $var3" # If you input only one value, #+ the other variable(s) will remain unset (null). exit 0 A read without an associated variable assigns its input to the dedicated variable $REPLY. Example 14-4. What happens when read has no variable #!/bin/bash # read-novar.sh echo # -------------------------- # echo -n "Enter a value: " read var echo ""var" = "$var"" # Everything as expected here. # -------------------------- # echo # ------------------------------------------------------------------- # echo -n "Enter another value: " read # No variable supplied for 'read', therefore... #+ Input to 'read' assigned to default variable, $REPLY. var="$REPLY" echo ""var" = "$var"" # This is equivalent to the first code block. Chapter 14. Internal Commands and Builtins 180
- 187. Advanced Bash-Scripting Guide # ------------------------------------------------------------------- # echo echo "=========================" echo # This example is similar to the "reply.sh" script. # However, this one shows that $REPLY is available #+ even after a 'read' to a variable in the conventional way. # ================================================================= # # In some instances, you might wish to discard the first value read. # In such cases, simply ignore the $REPLY variable. { # Code block. read # Line 1, to be discarded. read line2 # Line 2, saved in variable. } <$0 echo "Line 2 of this script is:" echo "$line2" # # read-novar.sh echo # #!/bin/bash line discarded. # See also the soundcard-on.sh script. exit 0 Normally, inputting a suppresses a newline during input to a read. The -r option causes an inputted to be interpreted literally. Example 14-5. Multi-line input to read #!/bin/bash echo echo "Enter a string terminated by a , then press <ENTER>." echo "Then, enter a second string (no this time), and again press <ENTER>." read var1 # The "" suppresses the newline, when reading $var1. # first line # second line echo "var1 = $var1" # var1 = first line second line # For each line terminated by a "" #+ you get a prompt on the next line to continue feeding characters into var1. echo; echo echo "Enter another string terminated by a , then press <ENTER>." read -r var2 # The -r option causes the "" to be read literally. # first line echo "var2 = $var2" # var2 = first line Chapter 14. Internal Commands and Builtins 181
- 188. Advanced Bash-Scripting Guide # Data entry terminates with the first <ENTER>. echo exit 0 The read command has some interesting options that permit echoing a prompt and even reading keystrokes without hitting ENTER. # Read a keypress without hitting ENTER. read -s -n1 -p "Hit a key " keypress echo; echo "Keypress was ""$keypress""." # -s option means do not echo input. # -n N option means accept only N characters of input. # -p option means echo the following prompt before reading input. # Using these options is tricky, since they need to be in the correct order. The -n option to read also allows detection of the arrow keys and certain of the other unusual keys. Example 14-6. Detecting the arrow keys #!/bin/bash # arrow-detect.sh: Detects the arrow keys, and a few more. # Thank you, Sandro Magi, for showing me how. # -------------------------------------------- # Character codes generated by the keypresses. arrowup='[A' arrowdown='[B' arrowrt='[C' arrowleft='[D' insert='[2' delete='[3' # -------------------------------------------- SUCCESS=0 OTHER=65 echo -n "Press a key... " # May need to also press ENTER if a key not listed above pressed. read -n3 key # Read 3 characters. echo -n "$key" | grep "$arrowup" #Check if character code detected. if [ "$?" -eq $SUCCESS ] then echo "Up-arrow key pressed." exit $SUCCESS fi echo -n "$key" | grep "$arrowdown" if [ "$?" -eq $SUCCESS ] then echo "Down-arrow key pressed." exit $SUCCESS fi Chapter 14. Internal Commands and Builtins 182
- 189. Advanced Bash-Scripting Guide echo -n "$key" | grep "$arrowrt" if [ "$?" -eq $SUCCESS ] then echo "Right-arrow key pressed." exit $SUCCESS fi echo -n "$key" | grep "$arrowleft" if [ "$?" -eq $SUCCESS ] then echo "Left-arrow key pressed." exit $SUCCESS fi echo -n "$key" | grep "$insert" if [ "$?" -eq $SUCCESS ] then echo ""Insert" key pressed." exit $SUCCESS fi echo -n "$key" | grep "$delete" if [ "$?" -eq $SUCCESS ] then echo ""Delete" key pressed." exit $SUCCESS fi echo " Some other key pressed." exit $OTHER # ========================================= # # Mark Alexander came up with a simplified #+ version of the above script (Thank you!). # It eliminates the need for grep. #!/bin/bash uparrow=$'x1b[A' downarrow=$'x1b[B' leftarrow=$'x1b[D' rightarrow=$'x1b[C' read -s -n3 -p "Hit an arrow key: " x case "$x" in $uparrow) echo "You pressed up-arrow" ;; $downarrow) echo "You pressed down-arrow" ;; $leftarrow) echo "You pressed left-arrow" ;; $rightarrow) echo "You pressed right-arrow" ;; Chapter 14. Internal Commands and Builtins 183
- 190. Advanced Bash-Scripting Guide esac exit $? # ========================================= # # Antonio Macchi has a simpler alternative. #!/bin/bash while true do read -sn1 a test "$a" == `echo -en "e"` || continue read -sn1 a test "$a" == "[" || continue read -sn1 a case "$a" in A) echo "up";; B) echo "down";; C) echo "right";; D) echo "left";; esac done # ========================================= # # Exercise: # -------- # 1) Add detection of the "Home," "End," "PgUp," and "PgDn" keys. The -n option to read will not detect the ENTER (newline) key. The -t option to read permits timed input (see Example 9-4 and Example A-41). The -u option takes the file descriptor of the target file. The read command may also "read" its variable value from a file redirected to stdin. If the file contains more than one line, only the first line is assigned to the variable. If read has more than one parameter, then each of these variables gets assigned a successive whitespace-delineated string. Caution! Example 14-7. Using read with file redirection #!/bin/bash read var1 <data-file echo "var1 = $var1" # var1 set to the entire first line of the input file "data-file" read var2 var3 <data-file echo "var2 = $var2 var3 = $var3" # Note non-intuitive behavior of "read" here. # 1) Rewinds back to the beginning of input file. # 2) Each variable is now set to a corresponding string, # separated by whitespace, rather than to an entire line of text. Chapter 14. Internal Commands and Builtins 184
- 191. Advanced Bash-Scripting Guide # 3) The final variable gets the remainder of the line. # 4) If there are more variables to be set than whitespace-terminated strings # on the first line of the file, then the excess variables remain empty. echo "------------------------------------------------" # How to resolve the above problem with a loop: while read line do echo "$line" done <data-file # Thanks, Heiner Steven for pointing this out. echo "------------------------------------------------" # Use $IFS (Internal Field Separator variable) to split a line of input to # "read", if you do not want the default to be whitespace. echo "List of all users:" OIFS=$IFS; IFS=: # /etc/passwd uses ":" for field separator. while read name passwd uid gid fullname ignore do echo "$name ($fullname)" done </etc/passwd # I/O redirection. IFS=$OIFS # Restore original $IFS. # This code snippet also by Heiner Steven. # Setting the $IFS variable within the loop itself #+ eliminates the need for storing the original $IFS #+ in a temporary variable. # Thanks, Dim Segebart, for pointing this out. echo "------------------------------------------------" echo "List of all users:" while IFS=: read name passwd uid gid fullname ignore do echo "$name ($fullname)" done </etc/passwd # I/O redirection. echo echo "$IFS still $IFS" exit 0 Piping output to a read, using echo to set variables will fail. Yet, piping the output of cat seems to work. cat file1 file2 | while read line do echo $line done However, as Bjön Eriksson shows: Chapter 14. Internal Commands and Builtins 185
- 192. Advanced Bash-Scripting Guide Example 14-8. Problems reading from a pipe #!/bin/sh # readpipe.sh # This example contributed by Bjon Eriksson. last="(null)" cat $0 | while read line do echo "{$line}" last=$line done echo echo "++++++++++++++++++++++" printf "nAll done, last: $lastn" exit 0 # End of code. # (Partial) output of script follows. # The 'echo' supplies extra brackets. ############################################# ./readpipe.sh {#!/bin/sh} {last="(null)"} {cat $0 |} {while read line} {do} {echo "{$line}"} {last=$line} {done} {printf "nAll done, last: $lastn"} All done, last: (null) The variable (last) is set within the loop/subshell but its value does not persist outside the loop. The gendiff script, usually found in /usr/bin on many Linux distros, pipes the output of find to a while read construct. find $1 ( -name "*$2" -o -name ".*$2" ) -print | while read f; do . . . It is possible to paste text into the input field of a read (but not multiple lines!). See Example A-38. Filesystem cd The familiar cd change directory command finds use in scripts where execution of a command requires being in a specified directory. Chapter 14. Internal Commands and Builtins 186
- 193. Advanced Bash-Scripting Guide (cd /source/directory && tar cf - . ) | (cd /dest/directory && tar xpvf -) [from the previously cited example by Alan Cox] The -P (physical) option to cd causes it to ignore symbolic links. cd - changes to $OLDPWD, the previous working directory. The cd command does not function as expected when presented with two forward slashes. bash$ cd // bash$ pwd // The output should, of course, be /. This is a problem both from the command-line and in a script. pwd Print Working Directory. This gives the user's (or script's) current directory (see Example 14-9). The effect is identical to reading the value of the builtin variable $PWD. pushd, popd, dirs This command set is a mechanism for bookmarking working directories, a means of moving back and forth through directories in an orderly manner. A pushdown stack is used to keep track of directory names. Options allow various manipulations of the directory stack. pushd dir-name pushes the path dir-name onto the directory stack and simultaneously changes the current working directory to dir-name popd removes (pops) the top directory path name off the directory stack and simultaneously changes the current working directory to that directory popped from the stack. dirs lists the contents of the directory stack (compare this with the $DIRSTACK variable). A successful pushd or popd will automatically invoke dirs. Scripts that require various changes to the current working directory without hard-coding the directory name changes can make good use of these commands. Note that the implicit $DIRSTACK array variable, accessible from within a script, holds the contents of the directory stack. Example 14-9. Changing the current working directory #!/bin/bash dir1=/usr/local dir2=/var/spool pushd $dir1 # Will do an automatic 'dirs' (list directory stack to stdout). echo "Now in directory `pwd`." # Uses back-quoted 'pwd'. # Now, do some stuff in directory 'dir1'. pushd $dir2 echo "Now in directory `pwd`." Chapter 14. Internal Commands and Builtins 187
- 194. Advanced Bash-Scripting Guide # Now, do some stuff in directory 'dir2'. echo "The top entry in the DIRSTACK array is $DIRSTACK." popd echo "Now back in directory `pwd`." # Now, do some more stuff in directory 'dir1'. popd echo "Now back in original working directory `pwd`." exit 0 # What happens if you don't 'popd' -- then exit the script? # Which directory do you end up in? Why? Variables let The let command carries out arithmetic operations on variables. [53] In many cases, it functions as a less complex version of expr. Example 14-10. Letting let do arithmetic. #!/bin/bash echo let a=11 # Same as 'a=11' let a=a+5 # Equivalent to let "a = a + 5" # (Double quotes and spaces make it more readable.) echo "11 + 5 = $a" # 16 let "a <<= 3" # Equivalent to let "a = a << 3" echo ""$a" (=16) left-shifted 3 places = $a" # 128 let "a /= 4" # Equivalent to let "a = a / 4" echo "128 / 4 = $a" # 32 let "a -= 5" # Equivalent to let "a = a - 5" echo "32 - 5 = $a" # 27 let "a *= 10" # Equivalent to let "a = a * 10" echo "27 * 10 = $a" # 270 let "a %= 8" # Equivalent to let "a = a % 8" echo "270 modulo 8 = $a (270 / 8 = 33, remainder $a)" # 6 # Does "let" permit C-style operators? # Yes, just as the (( ... )) double-parentheses construct does. let a++ # C-style (post) increment. echo "6++ = $a" # 6++ = 7 let a-- # C-style decrement. echo "7-- = $a" # 7-- = 6 # Of course, ++a, etc., also allowed . . . echo Chapter 14. Internal Commands and Builtins 188
- 195. Advanced Bash-Scripting Guide # Trinary operator. # Note that $a is 6, see above. let "t = a<7?7:11" # True echo $t # 7 let a++ let "t = a<7?7:11" # False echo $t # 11 exit eval eval arg1 [arg2] ... [argN] Combines the arguments in an expression or list of expressions and evaluates them. Any variables within the expression are expanded. The net result is to convert a string into a command. The eval command can be used for code generation from the command-line or within a script. bash$ command_string="ps ax" bash$ process="ps ax" bash$ eval "$command_string" | grep "$process" 26973 pts/3 R+ 0:00 grep --color ps ax 26974 pts/3 R+ 0:00 ps ax Each invocation of eval forces a re-evaluation of its arguments. a='$b' b='$c' c=d echo $a # $b # First level. eval echo $a # $c # Second level. eval eval echo $a # d # Third level. # Thank you, E. Choroba. Example 14-11. Showing the effect of eval #!/bin/bash # Exercising "eval" ... y=`eval ls -l` # Similar to y=`ls -l` echo $y #+ but linefeeds removed because "echoed" variable is unquoted. echo echo "$y" # Linefeeds preserved when variable is quoted. echo; echo Chapter 14. Internal Commands and Builtins 189
- 196. Advanced Bash-Scripting Guide y=`eval df` # Similar to y=`df` echo $y #+ but linefeeds removed. # When LF's not preserved, it may make it easier to parse output, #+ using utilities such as "awk". echo echo "===========================================================" echo eval "`seq 3 | sed -e 's/.*/echo var&=ABCDEFGHIJ/'`" # var1=ABCDEFGHIJ # var2=ABCDEFGHIJ # var3=ABCDEFGHIJ echo echo "===========================================================" echo # Now, showing how to do something useful with "eval" . . . # (Thank you, E. Choroba!) version=3.4 # Can we split the version into major and minor #+ part in one command? echo "version = $version" eval major=${version/./;minor=} # Replaces '.' in version by ';minor=' # The substitution yields '3; minor=4' #+ so eval does minor=4, major=3 echo Major: $major, minor: $minor # Major: 3, minor: 4 Example 14-12. Using eval to select among variables #!/bin/bash # arr-choice.sh # Passing arguments to a function to select #+ one particular variable out of a group. arr0=( 10 11 12 13 14 15 ) arr1=( 20 21 22 23 24 25 ) arr2=( 30 31 32 33 34 35 ) # 0 1 2 3 4 5 Element number (zero-indexed) choose_array () { eval array_member=${arr${array_number}[element_number]} # ^ ^^^^^^^^^^^^ # Using eval to construct the name of a variable, #+ in this particular case, an array name. echo "Element $element_number of array $array_number is $array_member" } # Function can be rewritten to take parameters. array_number=0 # First array. element_number=3 choose_array # 13 array_number=2 # Third array. Chapter 14. Internal Commands and Builtins 190
- 197. Advanced Bash-Scripting Guide element_number=4 choose_array # 34 array_number=3 # Null array (arr3 not allocated). element_number=4 choose_array # (null) # Thank you, Antonio Macchi, for pointing this out. Example 14-13. Echoing the command-line parameters #!/bin/bash # echo-params.sh # Call this script with a few command-line parameters. # For example: # sh echo-params.sh first second third fourth fifth params=$# # Number of command-line parameters. param=1 # Start at first command-line param. while [ "$param" -le "$params" ] do echo -n "Command-line parameter " echo -n $$param # Gives only the *name* of variable. # ^^^ # $1, $2, $3, etc. # Why? # $ escapes the first "$" #+ so it echoes literally, #+ and $param dereferences "$param" . . . #+ . . . as expected. echo -n " = " eval echo $$param # Gives the *value* of variable. # ^^^^ ^^^ # The "eval" forces the *evaluation* #+ of $$ #+ as an indirect variable reference. (( param ++ )) # On to the next. done exit $? # ================================================= $ sh echo-params.sh first second third fourth fifth Command-line parameter $1 = first Command-line parameter $2 = second Command-line parameter $3 = third Command-line parameter $4 = fourth Command-line parameter $5 = fifth Example 14-14. Forcing a log-off #!/bin/bash # Killing ppp to force a log-off. # For dialup connection, of course. # Script should be run as root user. SERPORT=ttyS3 Chapter 14. Internal Commands and Builtins 191
- 198. Advanced Bash-Scripting Guide # Depending on the hardware and even the kernel version, #+ the modem port on your machine may be different -- #+ /dev/ttyS1 or /dev/ttyS2. killppp="eval kill -9 `ps ax | awk '/ppp/ { print $1 }'`" # -------- process ID of ppp ------- $killppp # This variable is now a command. # The following operations must be done as root user. chmod 666 /dev/$SERPORT # Restore r+w permissions, or else what? # Since doing a SIGKILL on ppp changed the permissions on the serial port, #+ we restore permissions to previous state. rm /var/lock/LCK..$SERPORT # Remove the serial port lock file. Why? exit $? # Exercises: # --------- # 1) Have script check whether root user is invoking it. # 2) Do a check on whether the process to be killed #+ is actually running before attempting to kill it. # 3) Write an alternate version of this script based on 'fuser': #+ if [ fuser -s /dev/modem ]; then . . . Example 14-15. A version of rot13 #!/bin/bash # A version of "rot13" using 'eval'. # Compare to "rot13.sh" example. setvar_rot_13() # "rot13" scrambling { local varname=$1 varvalue=$2 eval $varname='$(echo "$varvalue" | tr a-z n-za-m)' } setvar_rot_13 var "foobar" # Run "foobar" through rot13. echo $var # sbbone setvar_rot_13 var "$var" # Run "sbbone" through rot13. # Back to original variable. echo $var # foobar # This example by Stephane Chazelas. # Modified by document author. exit 0 The eval command occurs in the older version of indirect referencing. eval var=$$var The eval command can be risky, and normally should be avoided when there exists a reasonable alternative. An eval $COMMANDS executes the contents of COMMANDS, Chapter 14. Internal Commands and Builtins 192
- 199. Advanced Bash-Scripting Guide which may contain such unpleasant surprises as rm -rf *. Running an eval on unfamiliar code written by persons unknown is living dangerously. set The set command changes the value of internal script variables/options. One use for this is to toggle option flags which help determine the behavior of the script. Another application for it is to reset the positional parameters that a script sees as the result of a command (set `command`). The script can then parse the fields of the command output. Example 14-16. Using set with positional parameters #!/bin/bash # ex34.sh # Script "set-test" # Invoke this script with three command-line parameters, # for example, "sh ex34.sh one two three". echo echo "Positional parameters before set `uname -a` :" echo "Command-line argument #1 = $1" echo "Command-line argument #2 = $2" echo "Command-line argument #3 = $3" set `uname -a` # Sets the positional parameters to the output # of the command `uname -a` echo echo +++++ echo $_ # +++++ # Flags set in script. echo $- # hB # Anomalous behavior? echo echo "Positional parameters after set `uname -a` :" # $1, $2, $3, etc. reinitialized to result of `uname -a` echo "Field #1 of 'uname -a' = $1" echo "Field #2 of 'uname -a' = $2" echo "Field #3 of 'uname -a' = $3" echo ### echo $_ # ### echo exit 0 More fun with positional parameters. Example 14-17. Reversing the positional parameters #!/bin/bash # revposparams.sh: Reverse positional parameters. # Script by Dan Jacobson, with stylistic revisions by document author. set a b c d e; # ^ ^ Spaces escaped Chapter 14. Internal Commands and Builtins 193
- 200. Advanced Bash-Scripting Guide # ^ ^ Spaces not escaped OIFS=$IFS; IFS=:; # ^ Saving old IFS and setting new one. echo until [ $# -eq 0 ] do # Step through positional parameters. echo "### k0 = "$k"" # Before k=$1:$k; # Append each pos param to loop variable. # ^ echo "### k = "$k"" # After echo shift; done set $k # Set new positional parameters. echo - echo $# # Count of positional parameters. echo - echo for i # Omitting the "in list" sets the variable -- i -- #+ to the positional parameters. do echo $i # Display new positional parameters. done IFS=$OIFS # Restore IFS. # Question: # Is it necessary to set an new IFS, internal field separator, #+ in order for this script to work properly? # What happens if you don't? Try it. # And, why use the new IFS -- a colon -- in line 17, #+ to append to the loop variable? # What is the purpose of this? exit 0 $ ./revposparams.sh ### k0 = ### k = a b ### k0 = a b ### k = c a b ### k0 = c a b ### k = d e c a b - 3 - d e c a b Invoking set without any options or arguments simply lists all the environmental and other variables that have been initialized. Chapter 14. Internal Commands and Builtins 194
- 201. Advanced Bash-Scripting Guide bash$ set AUTHORCOPY=/home/bozo/posts BASH=/bin/bash BASH_VERSION=$'2.05.8(1)-release' ... XAUTHORITY=/home/bozo/.Xauthority _=/etc/bashrc variable22=abc variable23=xzy Using set with the -- option explicitly assigns the contents of a variable to the positional parameters. If no variable follows the -- it unsets the positional parameters. Example 14-18. Reassigning the positional parameters #!/bin/bash variable="one two three four five" set -- $variable # Sets positional parameters to the contents of "$variable". first_param=$1 second_param=$2 shift; shift # Shift past first two positional params. # shift 2 also works. remaining_params="$*" echo echo "first parameter = $first_param" # one echo "second parameter = $second_param" # two echo "remaining parameters = $remaining_params" # three four five echo; echo # Again. set -- $variable first_param=$1 second_param=$2 echo "first parameter = $first_param" # one echo "second parameter = $second_param" # two # ====================================================== set -- # Unsets positional parameters if no variable specified. first_param=$1 second_param=$2 echo "first parameter = $first_param" # (null value) echo "second parameter = $second_param" # (null value) exit 0 See also Example 10-2 and Example 15-56. unset The unset command deletes a shell variable, effectively setting it to null. Note that this command does not affect positional parameters. Chapter 14. Internal Commands and Builtins 195
- 202. Advanced Bash-Scripting Guide bash$ unset PATH bash$ echo $PATH bash$ Example 14-19. "Unsetting" a variable #!/bin/bash # unset.sh: Unsetting a variable. variable=hello # Initialized. echo "variable = $variable" unset variable # Unset. # In this particular context, #+ same effect as: variable= echo "(unset) variable = $variable" # $variable is null. if [ -z "$variable" ] # Try a string-length test. then echo "$variable has zero length." fi exit 0 In most contexts, an undeclared variable and one that has been unset are equivalent. However, the ${parameter:-default} parameter substitution construct can distinguish between the two. export The export [54] command makes available variables to all child processes of the running script or shell. One important use of the export command is in startup files, to initialize and make accessible environmental variables to subsequent user processes. Unfortunately, there is no way to export variables back to the parent process, to the process that called or invoked the script or shell. Example 14-20. Using export to pass a variable to an embedded awk script #!/bin/bash # Yet another version of the "column totaler" script (col-totaler.sh) #+ that adds up a specified column (of numbers) in the target file. # This uses the environment to pass a script variable to 'awk' . . . #+ and places the awk script in a variable. ARGS=2 E_WRONGARGS=85 if [ $# -ne "$ARGS" ] # Check for proper number of command-line args. then echo "Usage: `basename $0` filename column-number" exit $E_WRONGARGS fi Chapter 14. Internal Commands and Builtins 196
- 203. Advanced Bash-Scripting Guide filename=$1 column_number=$2 #===== Same as original script, up to this point =====# export column_number # Export column number to environment, so it's available for retrieval. # ----------------------------------------------- awkscript='{ total += $ENVIRON["column_number"] } END { print total }' # Yes, a variable can hold an awk script. # ----------------------------------------------- # Now, run the awk script. awk "$awkscript" "$filename" # Thanks, Stephane Chazelas. exit 0 It is possible to initialize and export variables in the same operation, as in export var1=xxx. However, as Greg Keraunen points out, in certain situations this may have a different effect than setting a variable, then exporting it. bash$ export var=(a b); echo ${var[0]} (a b) bash$ var=(a b); export var; echo ${var[0]} a declare, typeset The declare and typeset commands specify and/or restrict properties of variables. readonly Same as declare -r, sets a variable as read-only, or, in effect, as a constant. Attempts to change the variable fail with an error message. This is the shell analog of the C language const type qualifier. getopts This powerful tool parses command-line arguments passed to the script. This is the Bash analog of the getopt external command and the getopt library function familiar to C programmers. It permits passing and concatenating multiple options [55] and associated arguments to a script (for example scriptname -abc -e /usr/local). The getopts construct uses two implicit variables. $OPTIND is the argument pointer (OPTion INDex) and $OPTARG (OPTion ARGument) the (optional) argument attached to an option. A colon following the option name in the declaration tags that option as having an associated argument. A getopts construct usually comes packaged in a while loop, which processes the options and arguments one at a time, then increments the implicit $OPTIND variable to point to the next. Chapter 14. Internal Commands and Builtins 197
- 204. Advanced Bash-Scripting Guide 1. The arguments passed from the command-line to the script must be preceded by a dash (-). It is the prefixed - that lets getopts recognize command-line arguments as options. In fact, getopts will not process arguments without the prefixed -, and will terminate option processing at the first argument encountered lacking them. 2. The getopts template differs slightly from the standard while loop, in that it lacks condition brackets. 3. The getopts construct is a highly functional replacement for the traditional getopt external command. while getopts ":abcde:fg" Option # Initial declaration. # a, b, c, d, e, f, and g are the options (flags) expected. # The : after option 'e' shows it will have an argument passed with it. do case $Option in a ) # Do something with variable 'a'. b ) # Do something with variable 'b'. ... e) # Do something with 'e', and also with $OPTARG, # which is the associated argument passed with option 'e'. ... g ) # Do something with variable 'g'. esac done shift $(($OPTIND - 1)) # Move argument pointer to next. # All this is not nearly as complicated as it looks <grin>. Example 14-21. Using getopts to read the options/arguments passed to a script #!/bin/bash # ex33.sh: Exercising getopts and OPTIND # Script modified 10/09/03 at the suggestion of Bill Gradwohl. # Here we observe how 'getopts' processes command-line arguments to script. # The arguments are parsed as "options" (flags) and associated arguments. # Try invoking this script with: # 'scriptname -mn' # 'scriptname -oq qOption' (qOption can be some arbitrary string.) # 'scriptname -qXXX -r' # # 'scriptname -qr' #+ - Unexpected result, takes "r" as the argument to option "q" # 'scriptname -q -r' #+ - Unexpected result, same as above # 'scriptname -mnop -mnop' - Unexpected result # (OPTIND is unreliable at stating where an option came from.) # # If an option expects an argument ("flag:"), then it will grab #+ whatever is next on the command-line. NO_ARGS=0 E_OPTERROR=85 if [ $# -eq "$NO_ARGS" ] # Script invoked with no command-line args? Chapter 14. Internal Commands and Builtins 198
- 205. Advanced Bash-Scripting Guide then echo "Usage: `basename $0` options (-mnopqrs)" exit $E_OPTERROR # Exit and explain usage. # Usage: scriptname -options # Note: dash (-) necessary fi while getopts ":mnopq:rs" Option do case $Option in m ) echo "Scenario #1: option -m- [OPTIND=${OPTIND}]";; n | o ) echo "Scenario #2: option -$Option- [OPTIND=${OPTIND}]";; p ) echo "Scenario #3: option -p- [OPTIND=${OPTIND}]";; q ) echo "Scenario #4: option -q- with argument "$OPTARG" [OPTIND=${OPTIND}]";; # Note that option 'q' must have an associated argument, #+ otherwise it falls through to the default. r | s ) echo "Scenario #5: option -$Option-";; * ) echo "Unimplemented option chosen.";; # Default. esac done shift $(($OPTIND - 1)) # Decrements the argument pointer so it points to next argument. # $1 now references the first non-option item supplied on the command-line #+ if one exists. exit $? # As Bill Gradwohl states, # "The getopts mechanism allows one to specify: scriptname -mnop -mnop #+ but there is no reliable way to differentiate what came #+ from where by using OPTIND." # There are, however, workarounds. Script Behavior source, . (dot command) This command, when invoked from the command-line, executes a script. Within a script, a source file-name loads the file file-name. Sourcing a file (dot-command) imports code into the script, appending to the script (same effect as the #include directive in a C program). The net result is the same as if the "sourced" lines of code were physically present in the body of the script. This is useful in situations when multiple scripts use a common data file or function library. Example 14-22. "Including" a data file #!/bin/bash . data-file # Load a data file. # Same effect as "source data-file", but more portable. # The file "data-file" must be present in current working directory, #+ since it is referred to by its 'basename'. # Now, reference some data from that file. echo "variable1 (from data-file) = $variable1" Chapter 14. Internal Commands and Builtins 199
- 206. Advanced Bash-Scripting Guide echo "variable3 (from data-file) = $variable3" let "sum = $variable2 + $variable4" echo "Sum of variable2 + variable4 (from data-file) = $sum" echo "message1 (from data-file) is "$message1"" # Note: escaped quotes print_message This is the message-print function in the data-file. exit 0 File data-file for Example 14-22, above. Must be present in same directory. # This is a data file loaded by a script. # Files of this type may contain variables, functions, etc. # It may be loaded with a 'source' or '.' command by a shell script. # Let's initialize some variables. variable1=22 variable2=474 variable3=5 variable4=97 message1="Hello, how are you?" message2="Enough for now. Goodbye." print_message () { # Echoes any message passed to it. if [ -z "$1" ] then return 1 # Error, if argument missing. fi echo until [ -z "$1" ] do # Step through arguments passed to function. echo -n "$1" # Echo args one at a time, suppressing line feeds. echo -n " " # Insert spaces between words. shift # Next one. done echo return 0 } If the sourced file is itself an executable script, then it will run, then return control to the script that called it. A sourced executable script may use a return for this purpose. Arguments may be (optionally) passed to the sourced file as positional parameters. Chapter 14. Internal Commands and Builtins 200
- 207. Advanced Bash-Scripting Guide source $filename $arg1 arg2 It is even possible for a script to source itself, though this does not seem to have any practical applications. Example 14-23. A (useless) script that sources itself #!/bin/bash # self-source.sh: a script sourcing itself "recursively." # From "Stupid Script Tricks," Volume II. MAXPASSCNT=100 # Maximum number of execution passes. echo -n "$pass_count " # At first execution pass, this just echoes two blank spaces, #+ since $pass_count still uninitialized. let "pass_count += 1" # Assumes the uninitialized variable $pass_count #+ can be incremented the first time around. # This works with Bash and pdksh, but #+ it relies on non-portable (and possibly dangerous) behavior. # Better would be to initialize $pass_count to 0 before incrementing. while [ "$pass_count" -le $MAXPASSCNT ] do . $0 # Script "sources" itself, rather than calling itself. # ./$0 (which would be true recursion) doesn't work here. Why? done # What occurs here is not actually recursion, #+ since the script effectively "expands" itself, i.e., #+ generates a new section of code #+ with each pass through the 'while' loop', # with each 'source' in line 20. # # Of course, the script interprets each newly 'sourced' "#!" line #+ as a comment, and not as the start of a new script. echo exit 0 # The net effect is counting from 1 to 100. # Very impressive. # Exercise: # -------- # Write a script that uses this trick to actually do something useful. exit Unconditionally terminates a script. [56] The exit command may optionally take an integer argument, which is returned to the shell as the exit status of the script. It is good practice to end all but the simplest scripts with an exit 0, indicating a successful run. If a script terminates with an exit lacking an argument, the exit status of the script is the exit status of the last command executed in the script, not counting the exit. This is equivalent to an exit $?. An exit command may also be used to terminate a subshell. Chapter 14. Internal Commands and Builtins 201
- 208. Advanced Bash-Scripting Guide exec This shell builtin replaces the current process with a specified command. Normally, when the shell encounters a command, it forks off a child process to actually execute the command. Using the exec builtin, the shell does not fork, and the command exec'ed replaces the shell. When used in a script, therefore, it forces an exit from the script when the exec'ed command terminates. [57] Example 14-24. Effects of exec #!/bin/bash exec echo "Exiting "$0"." # Exit from script here. # ---------------------------------- # The following lines never execute. echo "This echo will never echo." exit 99 # This script will not exit here. # Check exit value after script terminates #+ with an 'echo $?'. # It will *not* be 99. Example 14-25. A script that exec's itself #!/bin/bash # self-exec.sh # Note: Set permissions on this script to 555 or 755, # then call it with ./self-exec.sh or sh ./self-exec.sh. echo echo "This line appears ONCE in the script, yet it keeps echoing." echo "The PID of this instance of the script is still $$." # Demonstrates that a subshell is not forked off. echo "==================== Hit Ctl-C to exit ====================" sleep 1 exec $0 # Spawns another instance of this same script #+ that replaces the previous one. echo "This line will never echo!" # Why not? exit 99 # Will not exit here! # Exit code will not be 99! An exec also serves to reassign file descriptors. For example, exec <zzz-file replaces stdin with the file zzz-file. The -exec option to find is not the same as the exec shell builtin. shopt This command permits changing shell options on the fly (see Example 24-1 and Example 24-2). It often appears in the Bash startup files, but also has its uses in scripts. Needs version 2 or later of Bash. Chapter 14. Internal Commands and Builtins 202
- 209. Advanced Bash-Scripting Guide shopt -s cdspell # Allows minor misspelling of directory names with 'cd' cd /hpme # Oops! Mistyped '/home'. pwd # /home # The shell corrected the misspelling. caller Putting a caller command inside a function echoes to stdout information about the caller of that function. #!/bin/bash function1 () { # Inside function1 (). caller 0 # Tell me about it. } function1 # Line 9 of script. # 9 main test.sh # ^ Line number that the function was called from. # ^^^^ Invoked from "main" part of script. # ^^^^^^^ Name of calling script. caller 0 # Has no effect because it's not inside a function. A caller command can also return caller information from a script sourced within another script. Analogous to a function, this is a "subroutine call." You may find this command useful in debugging. Commands true A command that returns a successful (zero) exit status, but does nothing else. bash$ true bash$ echo $? 0 # Endless loop while true # alias for ":" do operation-1 operation-2 ... operation-n # Need a way to break out of loop or script will hang. done false A command that returns an unsuccessful exit status, but does nothing else. bash$ false bash$ echo $? 1 Chapter 14. Internal Commands and Builtins 203
- 210. Advanced Bash-Scripting Guide # Testing "false" if false then echo "false evaluates "true"" else echo "false evaluates "false"" fi # false evaluates "false" # Looping while "false" (null loop) while false do # The following code will not execute. operation-1 operation-2 ... operation-n # Nothing happens! done type [cmd] Similar to the which external command, type cmd identifies "cmd." Unlike which, type is a Bash builtin. The useful -a option to type identifies keywords and builtins, and also locates system commands with identical names. bash$ type '[' [ is a shell builtin bash$ type -a '[' [ is a shell builtin [ is /usr/bin/[ bash$ type type type is a shell builtin The type command can be useful for testing whether a certain command exists. hash [cmds] Records the path name of specified commands -- in the shell hash table [58] -- so the shell or script will not need to search the $PATH on subsequent calls to those commands. When hash is called with no arguments, it simply lists the commands that have been hashed. The -r option resets the hash table. bind The bind builtin displays or modifies readline [59] key bindings. help Gets a short usage summary of a shell builtin. This is the counterpart to whatis, but for builtins. The display of help information got a much-needed update in the version 4 release of Bash. bash$ help exit exit: exit [n] Exit the shell with a status of N. If N is omitted, the exit status is that of the last command executed. Chapter 14. Internal Commands and Builtins 204
- 211. Advanced Bash-Scripting Guide 14.1. Job Control Commands Certain of the following job control commands take a job identifier as an argument. See the table at end of the chapter. jobs Lists the jobs running in the background, giving the job number. Not as useful as ps. It is all too easy to confuse jobs and processes. Certain builtins, such as kill, disown, and wait accept either a job number or a process number as an argument. The fg, bg and jobs commands accept only a job number. bash$ sleep 100 & [1] 1384 bash $ jobs [1]+ Running sleep 100 & "1" is the job number (jobs are maintained by the current shell). "1384" is the PID or process ID number (processes are maintained by the system). To kill this job/process, either a kill %1 or a kill 1384 works. Thanks, S.C. disown Remove job(s) from the shell's table of active jobs. fg, bg The fg command switches a job running in the background into the foreground. The bg command restarts a suspended job, and runs it in the background. If no job number is specified, then the fg or bg command acts upon the currently running job. wait Suspend script execution until all jobs running in background have terminated, or until the job number or process ID specified as an option terminates. Returns the exit status of waited-for command. You may use the wait command to prevent a script from exiting before a background job finishes executing (this would create a dreaded orphan process). Example 14-26. Waiting for a process to finish before proceeding #!/bin/bash ROOT_UID=0 # Only users with $UID 0 have root privileges. E_NOTROOT=65 E_NOPARAMS=66 if [ "$UID" -ne "$ROOT_UID" ] then echo "Must be root to run this script." # "Run along kid, it's past your bedtime." exit $E_NOTROOT fi if [ -z "$1" ] then Chapter 14. Internal Commands and Builtins 205
- 212. Advanced Bash-Scripting Guide echo "Usage: `basename $0` find-string" exit $E_NOPARAMS fi echo "Updating 'locate' database..." echo "This may take a while." updatedb /usr & # Must be run as root. wait # Don't run the rest of the script until 'updatedb' finished. # You want the the database updated before looking up the file name. locate $1 # Without the 'wait' command, in the worse case scenario, #+ the script would exit while 'updatedb' was still running, #+ leaving it as an orphan process. exit 0 Optionally, wait can take a job identifier as an argument, for example, wait%1 or wait $PPID. See the job id table. Within a script, running a command in the background with an ampersand (&) may cause the script to han ENTER is hit. This seems to occur with commands that write to stdout. It can be a major annoyance. #!/bin/bash # test.sh ls -l & echo "Done." bash$ ./test.sh Done. [bozo@localhost test-scripts]$ total 1 -rwxr-xr-x 1 bozo bozo 34 Oct 11 15:09 test.sh _ As Walter Brameld IV explains it: As far as I can tell, such scripts don't actually hang. It ju seems that they do because the background command writes text the console after the prompt. The user gets the impression th the prompt was never displayed. Here's the sequence of events 1. Script launches background command. 2. Script exits. 3. Shell displays the prompt. 4. Background command continues running and writing text to t console. 5. Background command finishes. 6. User doesn't see a prompt at the bottom of the output, thi is hanging. Chapter 14. Internal Commands and Builtins 206
- 213. Advanced Bash-Scripting Guide Placing a wait after the background command seems to remedy this. #!/bin/bash # test.sh ls -l & echo "Done." wait bash$ ./test.sh Done. [bozo@localhost test-scripts]$ total 1 -rwxr-xr-x 1 bozo bozo 34 Oct 11 15:09 test.sh Redirecting the output of the command to a file or even to /dev/null also takes care of this problem. suspend This has a similar effect to Control-Z, but it suspends the shell (the shell's parent process should resume it at an appropriate time). logout Exit a login shell, optionally specifying an exit status. times Gives statistics on the system time elapsed when executing commands, in the following form: 0m0.020s 0m0.020s This capability is of relatively limited value, since it is not common to profile and benchmark shell scripts. kill Forcibly terminate a process by sending it an appropriate terminate signal (see Example 16-6). Example 14-27. A script that kills itself #!/bin/bash # self-destruct.sh kill $$ # Script kills its own process here. # Recall that "$$" is the script's PID. echo "This line will not echo." # Instead, the shell sends a "Terminated" message to stdout. exit 0 # Normal exit? No! # After this script terminates prematurely, #+ what exit status does it return? # # sh self-destruct.sh # echo $? # 143 # # 143 = 128 + 15 # TERM signal kill -l lists all the signals (as does the file /usr/include/asm/signal.h). A kill -9 is a sure kill, which will usually terminate a process that stubbornly refuses to die with a plain kill. Sometimes, a kill -15 works. A zombie process, Chapter 14. Internal Commands and Builtins 207
- 214. Advanced Bash-Scripting Guide that is, a child process that has terminated, but that the parent process has not (yet) killed, cannot be killed by a logged-on user -- you can't kill something that is already dead -- but init will generally clean it up sooner or later. killall The killall command kills a running process by name, rather than by process ID. If there are multiple instances of a particular command running, then doing a killall on that command will terminate them all. This refers to the killall command in /usr/bin, not the killall script in /etc/rc.d/init.d. command The command directive disables aliases and functions for the command immediately following it. bash$ command ls This is one of three shell directives that effect script command processing. The others are builtin and enable. builtin Invoking builtin BUILTIN_COMMAND runs the command BUILTIN_COMMAND as a shell builtin, temporarily disabling both functions and external system commands with the same name. enable This either enables or disables a shell builtin command. As an example, enable -n kill disables the shell builtin kill, so that when Bash subsequently encounters kill, it invokes the external command /bin/kill. The -a option to enable lists all the shell builtins, indicating whether or not they are enabled. The -f filename option lets enable load a builtin as a shared library (DLL) module from a properly compiled object file. [60]. autoload This is a port to Bash of the ksh autoloader. With autoload in place, a function with an autoload declaration will load from an external file at its first invocation. [61] This saves system resources. Note that autoload is not a part of the core Bash installation. It needs to be loaded in with enable -f (see above). Table 14-1. Job identifiers Notation Meaning %N Job number [N] %S Invocation (command-line) of job begins with string S %?S Invocation (command-line) of job contains within it string S %% "current" job (last job stopped in foreground or started in background) %+ "current" job (last job stopped in foreground or started in background) %- Last job $! Last background process Chapter 14. Internal Commands and Builtins 208
- 215. Advanced Bash-Scripting Guide Chapter 14. Internal Commands and Builtins 209
- 216. Chapter 15. External Filters, Programs and Commands Standard UNIX commands make shell scripts more versatile. The power of scripts comes from coupling system commands and shell directives with simple programming constructs. 15.1. Basic Commands The first commands a novice learns ls The basic file "list" command. It is all too easy to underestimate the power of this humble command. For example, using the -R, recursive option, ls provides a tree-like listing of a directory structure. Other useful options are -S, sort listing by file size, -t, sort by file modification time, -b, show escape characters, and -i, show file inodes (see Example 15-4). The ls command returns a non-zero exit status when attempting to list a non-existent file. bash$ ls abc ls: abc: No such file or directory bash$ echo $? 2 Example 15-1. Using ls to create a table of contents for burning a CDR disk #!/bin/bash # ex40.sh (burn-cd.sh) # Script to automate burning a CDR. SPEED=10 # May use higher speed if your hardware supports it. IMAGEFILE=cdimage.iso CONTENTSFILE=contents # DEVICE=/dev/cdrom For older versions of cdrecord DEVICE="1,0,0" DEFAULTDIR=/opt # This is the directory containing the data to be burned. # Make sure it exists. # Exercise: Add a test for this. # Uses Joerg Schilling's "cdrecord" package: # http://www.fokus.fhg.de/usr/schilling/cdrecord.html # If this script invoked as an ordinary user, may need to suid cdrecord #+ chmod u+s /usr/bin/cdrecord, as root. # Of course, this creates a security hole, though a relatively minor one. if [ -z "$1" ] then IMAGE_DIRECTORY=$DEFAULTDIR # Default directory, if not specified on command-line. Chapter 15. External Filters, Programs and Commands 210
- 217. Advanced Bash-Scripting Guide else IMAGE_DIRECTORY=$1 fi # Create a "table of contents" file. ls -lRF $IMAGE_DIRECTORY > $IMAGE_DIRECTORY/$CONTENTSFILE # The "l" option gives a "long" file listing. # The "R" option makes the listing recursive. # The "F" option marks the file types (directories get a trailing /). echo "Creating table of contents." # Create an image file preparatory to burning it onto the CDR. mkisofs -r -o $IMAGEFILE $IMAGE_DIRECTORY echo "Creating ISO9660 file system image ($IMAGEFILE)." # Burn the CDR. echo "Burning the disk." echo "Please be patient, this will take a while." wodim -v -isosize dev=$DEVICE $IMAGEFILE # In newer Linux distros, the "wodim" utility assumes the #+ functionality of "cdrecord." exitcode=$? echo "Exit code = $exitcode" exit $exitcode cat, tac cat, an acronym for concatenate, lists a file to stdout. When combined with redirection (> or >>), it is commonly used to concatenate files. # Uses of 'cat' cat filename # Lists the file. cat file.1 file.2 file.3 > file.123 # Combines three files into one. The -n option to cat inserts consecutive numbers before all lines of the target file(s). The -b option numbers only the non-blank lines. The -v option echoes nonprintable characters, using ^ notation. The -s option squeezes multiple consecutive blank lines into a single blank line. See also Example 15-28 and Example 15-24. In a pipe, it may be more efficient to redirect the stdin to a file, rather than to cat the file. cat filename | tr a-z A-Z tr a-z A-Z < filename # Same effect, but starts one less process, #+ and also dispenses with the pipe. tac, is the inverse of cat, listing a file backwards from its end. rev reverses each line of a file, and outputs to stdout. This does not have the same effect as tac, as it preserves the order of the lines, but flips each one around (mirror image). bash$ cat file1.txt This is line 1. This is line 2. bash$ tac file1.txt Chapter 15. External Filters, Programs and Commands 211
- 218. Advanced Bash-Scripting Guide This is line 2. This is line 1. bash$ rev file1.txt .1 enil si sihT .2 enil si sihT cp This is the file copy command. cp file1 file2 copies file1 to file2, overwriting file2 if it already exists (see Example 15-6). Particularly useful are the -a archive flag (for copying an entire directory tree), the -u update flag (which prevents overwriting identically-named newer files), and the -r and -R recursive flags. cp -u source_dir/* dest_dir # "Synchronize" dest_dir to source_dir #+ by copying over all newer and not previously existing files. mv This is the file move command. It is equivalent to a combination of cp and rm. It may be used to move multiple files to a directory, or even to rename a directory. For some examples of using mv in a script, see Example 9-20 and Example A-2. When used in a non-interactive script, mv takes the -f (force) option to bypass user input. When a directory is moved to a preexisting directory, it becomes a subdirectory of the destination directory. bash$ mv source_directory target_directory bash$ ls -lF target_directory total 1 drwxrwxr-x 2 bozo bozo 1024 May 28 19:20 source_directory/ rm Delete (remove) a file or files. The -f option forces removal of even readonly files, and is useful for bypassing user input in a script. The rm command will, by itself, fail to remove filenames beginning with a dash. Why? Because rm sees a dash-prefixed filename as an option. bash$ rm -badname rm: invalid option -- b Try `rm --help' for more information. One clever workaround is to precede the filename with a " -- " (the end-of-options flag). bash$ rm -- -badname Another method to is to preface the filename to be removed with a dot-slash . Chapter 15. External Filters, Programs and Commands 212
- 219. Advanced Bash-Scripting Guide bash$ rm ./-badname When used with the recursive flag -r, this command removes files all the way down the directory tree from the current directory. A careless rm -rf * can wipe out a big chunk of a directory structure. rmdir Remove directory. The directory must be empty of all files -- including "invisible" dotfiles [62] -- for this command to succeed. mkdir Make directory, creates a new directory. For example, mkdir -p project/programs/December creates the named directory. The -p option automatically creates any necessary parent directories. chmod Changes the attributes of an existing file or directory (see Example 14-14). chmod +x filename # Makes "filename" executable for all users. chmod u+s filename # Sets "suid" bit on "filename" permissions. # An ordinary user may execute "filename" with same privileges as the file's owner. # (This does not apply to shell scripts.) chmod 644 filename # Makes "filename" readable/writable to owner, readable to others # (octal mode). chmod 444 filename # Makes "filename" read-only for all. # Modifying the file (for example, with a text editor) #+ not allowed for a user who does not own the file (except for root), #+ and even the file owner must force a file-save #+ if she modifies the file. # Same restrictions apply for deleting the file. chmod 1777 directory-name # Gives everyone read, write, and execute permission in directory, #+ however also sets the "sticky bit". # This means that only the owner of the directory, #+ owner of the file, and, of course, root #+ can delete any particular file in that directory. chmod 111 directory-name # Gives everyone execute-only permission in a directory. # This means that you can execute and READ the files in that directory #+ (execute permission necessarily includes read permission #+ because you can't execute a file without being able to read it). # But you can't list the files or search for them with the "find" command. # These restrictions do not apply to root. chmod 000 directory-name # No permissions at all for that directory. # Can't read, write, or execute files in it. # Can't even list files in it or "cd" to it. # But, you can rename (mv) the directory #+ or delete it (rmdir) if it is empty. # You can even symlink to files in the directory, Chapter 15. External Filters, Programs and Commands 213
- 220. Advanced Bash-Scripting Guide #+ but you can't read, write, or execute the symlinks. # These restrictions do not apply to root. chattr Change file attributes. This is analogous to chmod above, but with different options and a different invocation syntax, and it works only on ext2/ext3 filesystems. One particularly interesting chattr option is i. A chattr +i filename marks the file as immutable. The file cannot be modified, linked to, or deleted, not even by root. This file attribute can be set or removed only by root. In a similar fashion, the a option marks the file as append only. root# chattr +i file1.txt root# rm file1.txt rm: remove write-protected regular file `file1.txt'? y rm: cannot remove `file1.txt': Operation not permitted If a file has the s (secure) attribute set, then when it is deleted its block is overwritten with binary zeroes. [63] If a file has the u (undelete) attribute set, then when it is deleted, its contents can still be retrieved (undeleted). If a file has the c (compress) attribute set, then it will automatically be compressed on writes to disk, and uncompressed on reads. The file attributes set with chattr do not show in a file listing (ls -l). ln Creates links to pre-existings files. A "link" is a reference to a file, an alternate name for it. The ln command permits referencing the linked file by more than one name and is a superior alternative to aliasing (see Example 4-6). The ln creates only a reference, a pointer to the file only a few bytes in size. The ln command is most often used with the -s, symbolic or "soft" link flag. Advantages of using the -s flag are that it permits linking across file systems or to directories. The syntax of the command is a bit tricky. For example: ln -s oldfile newfile links the previously existing oldfile to the newly created link, newfile. If a file named newfile has previously existed, an error message will result. Which type of link to use? As John Macdonald explains it: Both of these [types of links] provide a certain measure of dual reference -- if you edit the contents of the file using any name, your changes will affect both the original name and either a hard or soft Chapter 15. External Filters, Programs and Commands 214
- 221. Advanced Bash-Scripting Guide new name. The differences between them occurs when you work at a higher level. The advantage of a hard link is that the new name is totally independent of the old name -- if you remove or rename the old name, that does not affect the hard link, which continues to point to the data while it would leave a soft link hanging pointing to the old name which is no longer there. The advantage of a soft link is that it can refer to a different file system (since it is just a reference to a file name, not to actual data). And, unlike a hard link, a symbolic link can refer to a directory. Links give the ability to invoke a script (or any other type of executable) with multiple names, and having that script behave according to how it was invoked. Example 15-2. Hello or Good-bye #!/bin/bash # hello.sh: Saying "hello" or "goodbye" #+ depending on how script is invoked. # Make a link in current working directory ($PWD) to this script: # ln -s hello.sh goodbye # Now, try invoking this script both ways: # ./hello.sh # ./goodbye HELLO_CALL=65 GOODBYE_CALL=66 if [ $0 = "./goodbye" ] then echo "Good-bye!" # Some other goodbye-type commands, as appropriate. exit $GOODBYE_CALL fi echo "Hello!" # Some other hello-type commands, as appropriate. exit $HELLO_CALL man, info These commands access the manual and information pages on system commands and installed utilities. When available, the info pages usually contain more detailed descriptions than do the man pages. There have been various attempts at "automating" the writing of man pages. For a script that makes a tentative first step in that direction, see Example A-39. 15.2. Complex Commands Commands for more advanced users find -exec COMMAND ; Chapter 15. External Filters, Programs and Commands 215
- 222. Advanced Bash-Scripting Guide Carries out COMMAND on each file that find matches. The command sequence terminates with ; (the ";" is escaped to make certain the shell passes it to find literally, without interpreting it as a special character). bash$ find ~/ -name '*.txt' /home/bozo/.kde/share/apps/karm/karmdata.txt /home/bozo/misc/irmeyc.txt /home/bozo/test-scripts/1.txt If COMMAND contains {}, then find substitutes the full path name of the selected file for "{}". find ~/ -name 'core*' -exec rm {} ; # Removes all core dump files from user's home directory. find /home/bozo/projects -mtime -1 # ^ Note minus sign! # Lists all files in /home/bozo/projects directory tree #+ that were modified within the last day (current_day - 1). # find /home/bozo/projects -mtime 1 # Same as above, but modified *exactly* one day ago. # # mtime = last modification time of the target file # ctime = last status change time (via 'chmod' or otherwise) # atime = last access time DIR=/home/bozo/junk_files find "$DIR" -type f -atime +5 -exec rm {} ; # ^ ^^ # Curly brackets are placeholder for the path name output by "find." # # Deletes all files in "/home/bozo/junk_files" #+ that have not been accessed in *at least* 5 days (plus sign ... +5). # # "-type filetype", where # f = regular file # d = directory # l = symbolic link, etc. # # (The 'find' manpage and info page have complete option listings.) find /etc -exec grep '[0-9][0-9]*[.][0-9][0-9]*[.][0-9][0-9]*[.][0-9][0-9]*' {} ; # Finds all IP addresses (xxx.xxx.xxx.xxx) in /etc directory files. # There a few extraneous hits. Can they be filtered out? # Possibly by: find /etc -type f -exec cat '{}' ; | tr -c '.[:digit:]' 'n' | grep '^[^.][^.]*.[^.][^.]*.[^.][^.]*.[^.][^.]*$' # # [:digit:] is one of the character classes #+ introduced with the POSIX 1003.2 standard. # Thanks, Stéphane Chazelas. The -exec option to find should not be confused with the exec shell builtin. Chapter 15. External Filters, Programs and Commands 216
- 223. Advanced Bash-Scripting Guide Example 15-3. Badname, eliminate file names in current directory containing bad characters and whitespace. #!/bin/bash # badname.sh # Delete filenames in current directory containing bad characters. for filename in * do badname=`echo "$filename" | sed -n /[+{;"=?~()<>&*|$]/p` # badname=`echo "$filename" | sed -n '/[+{;"=?~()<>&*|$]/p'` also works. # Deletes files containing these nasties: + { ; " = ? ~ ( ) < > & * | $ # rm $badname 2>/dev/null # ^^^^^^^^^^^ Error messages deep-sixed. done # Now, take care of files containing all manner of whitespace. find . -name "* *" -exec rm -f {} ; # The path name of the file that _find_ finds replaces the "{}". # The '' ensures that the ';' is interpreted literally, as end of command. exit 0 #--------------------------------------------------------------------- # Commands below this line will not execute because of _exit_ command. # An alternative to the above script: find . -name '*[+{;"=?~()<>&*|$ ]*' -maxdepth 0 -exec rm -f '{}' ; # The "-maxdepth 0" option ensures that _find_ will not search #+ subdirectories below $PWD. # (Thanks, S.C.) Example 15-4. Deleting a file by its inode number #!/bin/bash # idelete.sh: Deleting a file by its inode number. # This is useful when a filename starts with an illegal character, #+ such as ? or -. ARGCOUNT=1 # Filename arg must be passed to script. E_WRONGARGS=70 E_FILE_NOT_EXIST=71 E_CHANGED_MIND=72 if [ $# -ne "$ARGCOUNT" ] then echo "Usage: `basename $0` filename" exit $E_WRONGARGS fi if [ ! -e "$1" ] then echo "File ""$1"" does not exist." exit $E_FILE_NOT_EXIST fi Chapter 15. External Filters, Programs and Commands 217
- 224. Advanced Bash-Scripting Guide inum=`ls -i | grep "$1" | awk '{print $1}'` # inum = inode (index node) number of file # ----------------------------------------------------------------------- # Every file has an inode, a record that holds its physical address info. # ----------------------------------------------------------------------- echo; echo -n "Are you absolutely sure you want to delete "$1" (y/n)? " # The '-v' option to 'rm' also asks this. read answer case "$answer" in [nN]) echo "Changed your mind, huh?" exit $E_CHANGED_MIND ;; *) echo "Deleting file "$1".";; esac find . -inum $inum -exec rm {} ; # ^^ # Curly brackets are placeholder #+ for text output by "find." echo "File ""$1"" deleted!" exit 0 The find command also works without the -exec option. #!/bin/bash # Find suid root files. # A strange suid file might indicate a security hole, #+ or even a system intrusion. directory="/usr/sbin" # Might also try /sbin, /bin, /usr/bin, /usr/local/bin, etc. permissions="+4000" # suid root (dangerous!) for file in $( find "$directory" -perm "$permissions" ) do ls -ltF --author "$file" done See Example 15-30, Example 3-4, and Example 10-9 for scripts using find. Its manpage provides more detail on this complex and powerful command. xargs A filter for feeding arguments to a command, and also a tool for assembling the commands themselves. It breaks a data stream into small enough chunks for filters and commands to process. Consider it as a powerful replacement for backquotes. In situations where command substitution fails with a too many arguments error, substituting xargs often works. [64] Normally, xargs reads from stdin or from a pipe, but it can also be given the output of a file. The default command for xargs is echo. This means that input piped to xargs may have linefeeds and other whitespace characters stripped out. bash$ ls -l total 0 -rw-rw-r-- 1 bozo bozo 0 Jan 29 23:58 file1 -rw-rw-r-- 1 bozo bozo 0 Jan 29 23:58 file2 Chapter 15. External Filters, Programs and Commands 218
- 225. Advanced Bash-Scripting Guide bash$ ls -l | xargs total 0 -rw-rw-r-- 1 bozo bozo 0 Jan 29 23:58 file1 -rw-rw-r-- 1 bozo bozo 0 Jan... bash$ find ~/mail -type f | xargs grep "Linux" ./misc:User-Agent: slrn/0.9.8.1 (Linux) ./sent-mail-jul-2005: hosted by the Linux Documentation Project. ./sent-mail-jul-2005: (Linux Documentation Project Site, rtf version) ./sent-mail-jul-2005: Subject: Criticism of Bozo's Windows/Linux article ./sent-mail-jul-2005: while mentioning that the Linux ext2/ext3 filesystem . . . ls | xargs -p -l gzip gzips every file in current directory, one at a time, prompting before each operation. Note that xargs processes the arguments passed to it sequentially, one at a time. bash$ find /usr/bin | xargs file /usr/bin: directory /usr/bin/foomatic-ppd-options: perl script text executable . . . An interesting xargs option is -n NN, which limits to NN the number of arguments passed. ls | xargs -n 8 echo lists the files in the current directory in 8 columns. Another useful option is -0, in combination with find -print0 or grep -lZ. This allows handling arguments containing whitespace or quotes. find / -type f -print0 | xargs -0 grep -liwZ GUI | xargs -0 rm -f grep -rliwZ GUI / | xargs -0 rm -f Either of the above will remove any file containing "GUI". (Thanks, S.C.) Or: cat /proc/"$pid"/"$OPTION" | xargs -0 echo # Formats output: ^^^^^^^^^^^^^^^ # From Han Holl's fixup of "get-commandline.sh" #+ script in "/dev and /proc" chapter. Example 15-5. Logfile: Using xargs to monitor system log #!/bin/bash # Generates a log file in current directory # from the tail end of /var/log/messages. Chapter 15. External Filters, Programs and Commands 219
- 226. Advanced Bash-Scripting Guide # Note: /var/log/messages must be world readable # if this script invoked by an ordinary user. # #root chmod 644 /var/log/messages LINES=5 ( date; uname -a ) >>logfile # Time and machine name echo ---------------------------------------------------------- >>logfile tail -n $LINES /var/log/messages | xargs | fmt -s >>logfile echo >>logfile echo >>logfile exit 0 # Note: # ---- # As Frank Wang points out, #+ unmatched quotes (either single or double quotes) in the source file #+ may give xargs indigestion. # # He suggests the following substitution for line 15: # tail -n $LINES /var/log/messages | tr -d ""'" | xargs | fmt -s >>logfile # Exercise: # -------- # Modify this script to track changes in /var/log/messages at intervals #+ of 20 minutes. # Hint: Use the "watch" command. As in find, a curly bracket pair serves as a placeholder for replacement text. Example 15-6. Copying files in current directory to another #!/bin/bash # copydir.sh # Copy (verbose) all files in current directory ($PWD) #+ to directory specified on command-line. E_NOARGS=85 if [ -z "$1" ] # Exit if no argument given. then echo "Usage: `basename $0` directory-to-copy-to" exit $E_NOARGS fi ls . | xargs -i -t cp ./{} $1 # ^^ ^^ ^^ # -t is "verbose" (output command-line to stderr) option. # -i is "replace strings" option. # {} is a placeholder for output text. # This is similar to the use of a curly-bracket pair in "find." # # List the files in current directory (ls .), #+ pass the output of "ls" as arguments to "xargs" (-i -t options), Chapter 15. External Filters, Programs and Commands 220
- 227. Advanced Bash-Scripting Guide #+ then copy (cp) these arguments ({}) to new directory ($1). # # The net result is the exact equivalent of #+ cp * $1 #+ unless any of the filenames has embedded "whitespace" characters. exit 0 Example 15-7. Killing processes by name #!/bin/bash # kill-byname.sh: Killing processes by name. # Compare this script with kill-process.sh. # For instance, #+ try "./kill-byname.sh xterm" -- #+ and watch all the xterms on your desktop disappear. # Warning: # ------- # This is a fairly dangerous script. # Running it carelessly (especially as root) #+ can cause data loss and other undesirable effects. E_BADARGS=66 if test -z "$1" # No command-line arg supplied? then echo "Usage: `basename $0` Process(es)_to_kill" exit $E_BADARGS fi PROCESS_NAME="$1" ps ax | grep "$PROCESS_NAME" | awk '{print $1}' | xargs -i kill {} 2&>/dev/null # ^^ ^^ # --------------------------------------------------------------- # Notes: # -i is the "replace strings" option to xargs. # The curly brackets are the placeholder for the replacement. # 2&>/dev/null suppresses unwanted error messages. # # Can grep "$PROCESS_NAME" be replaced by pidof "$PROCESS_NAME"? # --------------------------------------------------------------- exit $? # The "killall" command has the same effect as this script, #+ but using it is not quite as educational. Example 15-8. Word frequency analysis using xargs #!/bin/bash # wf2.sh: Crude word frequency analysis on a text file. # Uses 'xargs' to decompose lines of text into single words. # Compare this example to the "wf.sh" script later on. Chapter 15. External Filters, Programs and Commands 221
- 228. Advanced Bash-Scripting Guide # Check for input file on command-line. ARGS=1 E_BADARGS=85 E_NOFILE=86 if [ $# -ne "$ARGS" ] # Correct number of arguments passed to script? then echo "Usage: `basename $0` filename" exit $E_BADARGS fi if [ ! -f "$1" ] # Check if file exists. then echo "File "$1" does not exist." exit $E_NOFILE fi ##################################################### cat "$1" | xargs -n1 | # List the file, one word per line. tr A-Z a-z | # Shift characters to lowercase. sed -e 's/.//g' -e 's/,//g' -e 's/ / /g' | # Filter out periods and commas, and #+ change space between words to linefeed, sort | uniq -c | sort -nr # Finally remove duplicates, prefix occurrence count #+ and sort numerically. ##################################################### # This does the same job as the "wf.sh" example, #+ but a bit more ponderously, and it runs more slowly (why?). exit $? expr All-purpose expression evaluator: Concatenates and evaluates the arguments according to the operation given (arguments must be separated by spaces). Operations may be arithmetic, comparison, string, or logical. expr 3 + 5 returns 8 expr 5 % 3 returns 2 expr 1 / 0 returns the error message, expr: division by zero Illegal arithmetic operations not allowed. expr 5 * 3 returns 15 The multiplication operator must be escaped when used in an arithmetic expression with expr. y=`expr $y + 1` Chapter 15. External Filters, Programs and Commands 222
- 229. Advanced Bash-Scripting Guide Increment a variable, with the same effect as let y=y+1 and y=$(($y+1)). This is an example of arithmetic expansion. z=`expr substr $string $position $length` Extract substring of $length characters, starting at $position. Example 15-9. Using expr #!/bin/bash # Demonstrating some of the uses of 'expr' # ======================================= echo # Arithmetic Operators # ---------- --------- echo "Arithmetic Operators" echo a=`expr 5 + 3` echo "5 + 3 = $a" a=`expr $a + 1` echo echo "a + 1 = $a" echo "(incrementing a variable)" a=`expr 5 % 3` # modulo echo echo "5 mod 3 = $a" echo echo # Logical Operators # ------- --------- # Returns 1 if true, 0 if false, #+ opposite of normal Bash convention. echo "Logical Operators" echo x=24 y=25 b=`expr $x = $y` # Test equality. echo "b = $b" # 0 ( $x -ne $y ) echo a=3 b=`expr $a > 10` echo 'b=`expr $a > 10`, therefore...' echo "If a > 10, b = 0 (false)" echo "b = $b" # 0 ( 3 ! -gt 10 ) echo b=`expr $a < 10` echo "If a < 10, b = 1 (true)" echo "b = $b" # 1 ( 3 -lt 10 ) Chapter 15. External Filters, Programs and Commands 223
- 230. Advanced Bash-Scripting Guide echo # Note escaping of operators. b=`expr $a <= 3` echo "If a <= 3, b = 1 (true)" echo "b = $b" # 1 ( 3 -le 3 ) # There is also a ">=" operator (greater than or equal to). echo echo # String Operators # ------ --------- echo "String Operators" echo a=1234zipper43231 echo "The string being operated upon is "$a"." # length: length of string b=`expr length $a` echo "Length of "$a" is $b." # index: position of first character in substring # that matches a character in string b=`expr index $a 23` echo "Numerical position of first "2" in "$a" is "$b"." # substr: extract substring, starting position & length specified b=`expr substr $a 2 6` echo "Substring of "$a", starting at position 2, and 6 chars long is "$b"." # The default behavior of the 'match' operations is to #+ search for the specified match at the BEGINNING of the string. # # Using Regular Expressions ... b=`expr match "$a" '[0-9]*'` # Numerical count. echo Number of digits at the beginning of "$a" is $b. b=`expr match "$a" '([0-9]*)'` # Note that escaped parentheses # == == #+ trigger substring match. echo "The digits at the beginning of "$a" are "$b"." echo exit 0 The : (null) operator can substitute for match. For example, b=`expr $a : [0-9]*` is the exact equivalent of b=`expr match $a [0-9]*` in the above listing. #!/bin/bash echo echo "String operations using "expr $string : " construct" echo "===================================================" echo Chapter 15. External Filters, Programs and Commands 224
- 231. Advanced Bash-Scripting Guide a=1234zipper5FLIPPER43231 echo "The string being operated upon is "`expr "$a" : '(.*)'`"." # Escaped parentheses grouping operator. == == # *************************** #+ Escaped parentheses #+ match a substring # *************************** # If no escaped parentheses... #+ then 'expr' converts the string operand to an integer. echo "Length of "$a" is `expr "$a" : '.*'`." # Length of string echo "Number of digits at the beginning of "$a" is `expr "$a" : '[0-9]*'`." # ------------------------------------------------------------------------- # echo echo "The digits at the beginning of "$a" are `expr "$a" : '([0-9]*)'`." # == == echo "The first 7 characters of "$a" are `expr "$a" : '(.......)'`." # ===== == == # Again, escaped parentheses force a substring match. # echo "The last 7 characters of "$a" are `expr "$a" : '.*(.......)'`." # ==== end of string operator ^^ # (actually means skip over one or more of any characters until specified #+ substring) echo exit 0 The above script illustrates how expr uses the escaped parentheses -- ( ... ) -- grouping operator in tandem with regular expression parsing to match a substring. Here is a another example, this time from "real life." # Strip the whitespace from the beginning and end. LRFDATE=`expr "$LRFDATE" : '[[:space:]]*(.*)[[:space:]]*$'` # From Peter Knowles' "booklistgen.sh" script #+ for converting files to Sony Librie/PRS-50X format. # (http://booklistgensh.peterknowles.com) Perl, sed, and awk have far superior string parsing facilities. A short sed or awk "subroutine" within a script (see Section 33.3) is an attractive alternative to expr. See Section 9.2 for more on using expr in string operations. 15.3. Time / Date Commands Time/date and timing date Chapter 15. External Filters, Programs and Commands 225
- 232. Advanced Bash-Scripting Guide Simply invoked, date prints the date and time to stdout. Where this command gets interesting is in its formatting and parsing options. Example 15-10. Using date #!/bin/bash # Exercising the 'date' command echo "The number of days since the year's beginning is `date +%j`." # Needs a leading '+' to invoke formatting. # %j gives day of year. echo "The number of seconds elapsed since 01/01/1970 is `date +%s`." # %s yields number of seconds since "UNIX epoch" began, #+ but how is this useful? prefix=temp suffix=$(date +%s) # The "+%s" option to 'date' is GNU-specific. filename=$prefix.$suffix echo "Temporary filename = $filename" # It's great for creating "unique and random" temp filenames, #+ even better than using $$. # Read the 'date' man page for more formatting options. exit 0 The -u option gives the UTC (Universal Coordinated Time). bash$ date Fri Mar 29 21:07:39 MST 2002 bash$ date -u Sat Mar 30 04:07:42 UTC 2002 This option facilitates calculating the time between different dates. Example 15-11. Date calculations #!/bin/bash # date-calc.sh # Author: Nathan Coulter # Used in ABS Guide with permission (thanks!). MPHR=60 # Minutes per hour. HPD=24 # Hours per day. diff () { printf '%s' $(( $(date -u -d"$TARGET" +%s) - $(date -u -d"$CURRENT" +%s))) # %d = day of month. } CURRENT=$(date -u -d '2007-09-01 17:30:24' '+%F %T.%N %Z') TARGET=$(date -u -d'2007-12-25 12:30:00' '+%F %T.%N %Z') Chapter 15. External Filters, Programs and Commands 226
- 233. Advanced Bash-Scripting Guide # %F = full date, %T = %H:%M:%S, %N = nanoseconds, %Z = time zone. printf 'nIn 2007, %s ' "$(date -d"$CURRENT + $(( $(diff) /$MPHR /$MPHR /$HPD / 2 )) days" '+%d %B')" # %B = name of month ^ halfway printf 'was halfway between %s ' "$(date -d"$CURRENT" '+%d %B')" printf 'and %sn' "$(date -d"$TARGET" '+%d %B')" printf 'nOn %s at %s, there weren' $(date -u -d"$CURRENT" +%F) $(date -u -d"$CURRENT" +%T) DAYS=$(( $(diff) / $MPHR / $MPHR / $HPD )) CURRENT=$(date -d"$CURRENT +$DAYS days" '+%F %T.%N %Z') HOURS=$(( $(diff) / $MPHR / $MPHR )) CURRENT=$(date -d"$CURRENT +$HOURS hours" '+%F %T.%N %Z') MINUTES=$(( $(diff) / $MPHR )) CURRENT=$(date -d"$CURRENT +$MINUTES minutes" '+%F %T.%N %Z') printf '%s days, %s hours, ' "$DAYS" "$HOURS" printf '%s minutes, and %s seconds ' "$MINUTES" "$(diff)" printf 'until Christmas Dinner!nn' # Exercise: # -------- # Rewrite the diff () function to accept passed parameters, #+ rather than using global variables. The date command has quite a number of output options. For example %N gives the nanosecond portion of the current time. One interesting use for this is to generate random integers. date +%N | sed -e 's/000$//' -e 's/^0//' ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ # Strip off leading and trailing zeroes, if present. # Length of generated integer depends on #+ how many zeroes stripped off. # 115281032 # 63408725 # 394504284 There are many more options (try man date). date +%j # Echoes day of the year (days elapsed since January 1). date +%k%M # Echoes hour and minute in 24-hour format, as a single digit string. # The 'TZ' parameter permits overriding the default time zone. date # Mon Mar 28 21:42:16 MST 2005 TZ=EST date # Mon Mar 28 23:42:16 EST 2005 # Thanks, Frank Kannemann and Pete Sjoberg, for the tip. SixDaysAgo=$(date --date='6 days ago') OneMonthAgo=$(date --date='1 month ago') # Four weeks back (not a month!) OneYearAgo=$(date --date='1 year ago') See also Example 3-4 and Example A-43. zdump Chapter 15. External Filters, Programs and Commands 227
- 234. Advanced Bash-Scripting Guide Time zone dump: echoes the time in a specified time zone. bash$ zdump EST EST Tue Sep 18 22:09:22 2001 EST time Outputs verbose timing statistics for executing a command. time ls -l / gives something like this: real 0m0.067s user 0m0.004s sys 0m0.005s See also the very similar times command in the previous section. As of version 2.0 of Bash, time became a shell reserved word, with slightly altered behavior in a pipeline. touch Utility for updating access/modification times of a file to current system time or other specified time, but also useful for creating a new file. The command touch zzz will create a new file of zero length, named zzz, assuming that zzz did not previously exist. Time-stamping empty files in this way is useful for storing date information, for example in keeping track of modification times on a project. The touch command is equivalent to : >> newfile or >> newfile (for ordinary files). Before doing a cp -u (copy/update), use touch to update the time stamp of files you don't wish overwritten. As an example, if the directory /home/bozo/tax_audit contains the files spreadsheet-051606.data, spreadsheet-051706.data, and spreadsheet-051806.data, then doing a touch spreadsheet*.data will protect these files from being overwritten by files with the same names during a cp -u /home/bozo/financial_info/spreadsheet*data /home/bozo/tax_audit. at The at job control command executes a given set of commands at a specified time. Superficially, it resembles cron, however, at is chiefly useful for one-time execution of a command set. at 2pm January 15 prompts for a set of commands to execute at that time. These commands should be shell-script compatible, since, for all practical purposes, the user is typing in an executable shell script a line at a time. Input terminates with a Ctl-D. Using either the -f option or input redirection (<), at reads a command list from a file. This file is an executable shell script, though it should, of course, be non-interactive. Particularly clever is including the run-parts command in the file to execute a different set of scripts. bash$ at 2:30 am Friday < at-jobs.list job 2 at 2000-10-27 02:30 batch Chapter 15. External Filters, Programs and Commands 228
- 235. Advanced Bash-Scripting Guide The batch job control command is similar to at, but it runs a command list when the system load drops below .8. Like at, it can read commands from a file with the -f option. The concept of batch processing dates back to the era of mainframe computers. It means running a set of commands without user intervention. cal Prints a neatly formatted monthly calendar to stdout. Will do current year or a large range of past and future years. sleep This is the shell equivalent of a wait loop. It pauses for a specified number of seconds, doing nothing. It can be useful for timing or in processes running in the background, checking for a specific event every so often (polling), as in Example 29-6. sleep 3 # Pauses 3 seconds. The sleep command defaults to seconds, but minute, hours, or days may also be specified. sleep 3 h # Pauses 3 hours! The watch command may be a better choice than sleep for running commands at timed intervals. usleep Microsleep (the u may be read as the Greek mu, or micro- prefix). This is the same as sleep, above, but "sleeps" in microsecond intervals. It can be used for fine-grained timing, or for polling an ongoing process at very frequent intervals. usleep 30 # Pauses 30 microseconds. This command is part of the Red Hat initscripts / rc-scripts package. The usleep command does not provide particularly accurate timing, and is therefore unsuitable for critical timing loops. hwclock, clock The hwclock command accesses or adjusts the machine's hardware clock. Some options require root privileges. The /etc/rc.d/rc.sysinit startup file uses hwclock to set the system time from the hardware clock at bootup. The clock command is a synonym for hwclock. 15.4. Text Processing Commands Commands affecting text and text files sort File sort utility, often used as a filter in a pipe. This command sorts a text stream or file forwards or backwards, or according to various keys or character positions. Using the -m option, it merges presorted input files. The info page lists its many capabilities and options. See Example 10-9, Chapter 15. External Filters, Programs and Commands 229
- 236. Advanced Bash-Scripting Guide Example 10-10, and Example A-8. tsort Topological sort, reading in pairs of whitespace-separated strings and sorting according to input patterns. The original purpose of tsort was to sort a list of dependencies for an obsolete version of the ld linker in an "ancient" version of UNIX. The results of a tsort will usually differ markedly from those of the standard sort command, above. uniq This filter removes duplicate lines from a sorted file. It is often seen in a pipe coupled with sort. cat list-1 list-2 list-3 | sort | uniq > final.list # Concatenates the list files, # sorts them, # removes duplicate lines, # and finally writes the result to an output file. The useful -c option prefixes each line of the input file with its number of occurrences. bash$ cat testfile This line occurs only once. This line occurs twice. This line occurs twice. This line occurs three times. This line occurs three times. This line occurs three times. bash$ uniq -c testfile 1 This line occurs only once. 2 This line occurs twice. 3 This line occurs three times. bash$ sort testfile | uniq -c | sort -nr 3 This line occurs three times. 2 This line occurs twice. 1 This line occurs only once. The sort INPUTFILE | uniq -c | sort -nr command string produces a frequency of occurrence listing on the INPUTFILE file (the -nr options to sort cause a reverse numerical sort). This template finds use in analysis of log files and dictionary lists, and wherever the lexical structure of a document needs to be examined. Example 15-12. Word Frequency Analysis #!/bin/bash # wf.sh: Crude word frequency analysis on a text file. # This is a more efficient version of the "wf2.sh" script. # Check for input file on command-line. ARGS=1 E_BADARGS=85 E_NOFILE=86 if [ $# -ne "$ARGS" ] # Correct number of arguments passed to script? then Chapter 15. External Filters, Programs and Commands 230
- 237. Advanced Bash-Scripting Guide echo "Usage: `basename $0` filename" exit $E_BADARGS fi if [ ! -f "$1" ] # Check if file exists. then echo "File "$1" does not exist." exit $E_NOFILE fi ######################################################## # main () sed -e 's/.//g' -e 's/,//g' -e 's/ / /g' "$1" | tr 'A-Z' 'a-z' | sort | uniq -c | sort -nr # ========================= # Frequency of occurrence # Filter out periods and commas, and #+ change space between words to linefeed, #+ then shift characters to lowercase, and #+ finally prefix occurrence count and sort numerically. # Arun Giridhar suggests modifying the above to: # . . . | sort | uniq -c | sort +1 [-f] | sort +0 -nr # This adds a secondary sort key, so instances of #+ equal occurrence are sorted alphabetically. # As he explains it: # "This is effectively a radix sort, first on the #+ least significant column #+ (word or string, optionally case-insensitive) #+ and last on the most significant column (frequency)." # # As Frank Wang explains, the above is equivalent to #+ . . . | sort | uniq -c | sort +0 -nr #+ and the following also works: #+ . . . | sort | uniq -c | sort -k1nr -k ######################################################## exit 0 # Exercises: # --------- # 1) Add 'sed' commands to filter out other punctuation, #+ such as semicolons. # 2) Modify the script to also filter out multiple spaces and #+ other whitespace. bash$ cat testfile This line occurs only once. This line occurs twice. This line occurs twice. This line occurs three times. This line occurs three times. This line occurs three times. bash$ ./wf.sh testfile 6 this 6 occurs 6 line Chapter 15. External Filters, Programs and Commands 231
- 238. Advanced Bash-Scripting Guide 3 times 3 three 2 twice 1 only 1 once expand, unexpand The expand filter converts tabs to spaces. It is often used in a pipe. The unexpand filter converts spaces to tabs. This reverses the effect of expand. cut A tool for extracting fields from files. It is similar to the print $N command set in awk, but more limited. It may be simpler to use cut in a script than awk. Particularly important are the -d (delimiter) and -f (field specifier) options. Using cut to obtain a listing of the mounted filesystems: cut -d ' ' -f1,2 /etc/mtab Using cut to list the OS and kernel version: uname -a | cut -d" " -f1,3,11,12 Using cut to extract message headers from an e-mail folder: bash$ grep '^Subject:' read-messages | cut -c10-80 Re: Linux suitable for mission-critical apps? MAKE MILLIONS WORKING AT HOME!!! Spam complaint Re: Spam complaint Using cut to parse a file: # List all the users in /etc/passwd. FILENAME=/etc/passwd for user in $(cut -d: -f1 $FILENAME) do echo $user done # Thanks, Oleg Philon for suggesting this. cut -d ' ' -f2,3 filename is equivalent to awk -F'[ ]' '{ print $2, $3 }' filename It is even possible to specify a linefeed as a delimiter. The trick is to actually embed a linefeed (RETURN) in the command sequence. bash$ cut -d' ' -f3,7,19 testfile This is line 3 of testfile. This is line 7 of testfile. This is line 19 of testfile. Thank you, Jaka Kranjc, for pointing this out. See also Example 15-48. Chapter 15. External Filters, Programs and Commands 232
- 239. Advanced Bash-Scripting Guide paste Tool for merging together different files into a single, multi-column file. In combination with cut, useful for creating system log files. join Consider this a special-purpose cousin of paste. This powerful utility allows merging two files in a meaningful fashion, which essentially creates a simple version of a relational database. The join command operates on exactly two files, but pastes together only those lines with a common tagged field (usually a numerical label), and writes the result to stdout. The files to be joined should be sorted according to the tagged field for the matchups to work properly. File: 1.data 100 Shoes 200 Laces 300 Socks File: 2.data 100 $40.00 200 $1.00 300 $2.00 bash$ join 1.data 2.data File: 1.data 2.data 100 Shoes $40.00 200 Laces $1.00 300 Socks $2.00 The tagged field appears only once in the output. head lists the beginning of a file to stdout. The default is 10 lines, but a different number can be specified. The command has a number of interesting options. Example 15-13. Which files are scripts? #!/bin/bash # script-detector.sh: Detects scripts within a directory. TESTCHARS=2 # Test first 2 characters. SHABANG='#!' # Scripts begin with a "sha-bang." for file in * # Traverse all the files in current directory. do if [[ `head -c$TESTCHARS "$file"` = "$SHABANG" ]] # head -c2 #! # The '-c' option to "head" outputs a specified #+ number of characters, rather than lines (the default). then echo "File "$file" is a script." else echo "File "$file" is *not* a script." fi done Chapter 15. External Filters, Programs and Commands 233
- 240. Advanced Bash-Scripting Guide exit 0 # Exercises: # --------- # 1) Modify this script to take as an optional argument #+ the directory to scan for scripts #+ (rather than just the current working directory). # # 2) As it stands, this script gives "false positives" for #+ Perl, awk, and other scripting language scripts. # Correct this. Example 15-14. Generating 10-digit random numbers #!/bin/bash # rnd.sh: Outputs a 10-digit random number # Script by Stephane Chazelas. head -c4 /dev/urandom | od -N4 -tu4 | sed -ne '1s/.* //p' # =================================================================== # # Analysis # -------- # head: # -c4 option takes first 4 bytes. # od: # -N4 option limits output to 4 bytes. # -tu4 option selects unsigned decimal format for output. # sed: # -n option, in combination with "p" flag to the "s" command, # outputs only matched lines. # The author of this script explains the action of 'sed', as follows. # head -c4 /dev/urandom | od -N4 -tu4 | sed -ne '1s/.* //p' # ----------------------------------> | # Assume output up to "sed" --------> | # is 0000000 1198195154n # sed begins reading characters: 0000000 1198195154n. # Here it finds a newline character, #+ so it is ready to process the first line (0000000 1198195154). # It looks at its <range><action>s. The first and only one is # range action # 1 s/.* //p # The line number is in the range, so it executes the action: #+ tries to substitute the longest string ending with a space in the line # ("0000000 ") with nothing (//), and if it succeeds, prints the result # ("p" is a flag to the "s" command here, this is different Chapter 15. External Filters, Programs and Commands 234
- 241. Advanced Bash-Scripting Guide #+ from the "p" command). # sed is now ready to continue reading its input. (Note that before #+ continuing, if -n option had not been passed, sed would have printed #+ the line once again). # Now, sed reads the remainder of the characters, and finds the #+ end of the file. # It is now ready to process its 2nd line (which is also numbered '$' as #+ it's the last one). # It sees it is not matched by any <range>, so its job is done. # In few word this sed commmand means: # "On the first line only, remove any character up to the right-most space, #+ then print it." # A better way to do this would have been: # sed -e 's/.* //;q' # Here, two <range><action>s (could have been written # sed -e 's/.* //' -e q): # range action # nothing (matches line) s/.* // # nothing (matches line) q (quit) # Here, sed only reads its first line of input. # It performs both actions, and prints the line (substituted) before #+ quitting (because of the "q" action) since the "-n" option is not passed. # =================================================================== # # An even simpler altenative to the above one-line script would be: # head -c4 /dev/urandom| od -An -tu4 exit See also Example 15-39. tail lists the (tail) end of a file to stdout. The default is 10 lines, but this can be changed with the -n option. Commonly used to keep track of changes to a system logfile, using the -f option, which outputs lines appended to the file. Example 15-15. Using tail to monitor the system log #!/bin/bash filename=sys.log cat /dev/null > $filename; echo "Creating / cleaning out file." # Creates file if it does not already exist, #+ and truncates it to zero length if it does. # : > filename and > filename also work. tail /var/log/messages > $filename # /var/log/messages must have world read permission for this to work. echo "$filename contains tail end of system log." exit 0 Chapter 15. External Filters, Programs and Commands 235
- 242. Advanced Bash-Scripting Guide To list a specific line of a text file, pipe the output of head to tail -n 1. For example head -n 8 database.txt | tail -n 1 lists the 8th line of the file database.txt. To set a variable to a given block of a text file: var=$(head -n $m $filename | tail -n $n) # filename = name of file # m = from beginning of file, number of lines to end of block # n = number of lines to set variable to (trim from end of block) Newer implementations of tail deprecate the older tail -$LINES filename usage. The standard tail -n $LINES filename is correct. See also Example 15-5, Example 15-39 and Example 29-6. grep A multi-purpose file search tool that uses Regular Expressions. It was originally a command/filter in the venerable ed line editor: g/re/p -- global - regular expression - print. grep pattern [file...] Search the target file(s) for occurrences of pattern, where pattern may be literal text or a Regular Expression. bash$ grep '[rst]ystem.$' osinfo.txt The GPL governs the distribution of the Linux operating system. If no target file(s) specified, grep works as a filter on stdout, as in a pipe. bash$ ps ax | grep clock 765 tty1 S 0:00 xclock 901 pts/1 S 0:00 grep clock The -i option causes a case-insensitive search. The -w option matches only whole words. The -l option lists only the files in which matches were found, but not the matching lines. The -r (recursive) option searches files in the current working directory and all subdirectories below it. The -n option lists the matching lines, together with line numbers. bash$ grep -n Linux osinfo.txt 2:This is a file containing information about Linux. 6:The GPL governs the distribution of the Linux operating system. The -v (or --invert-match) option filters out matches. grep pattern1 *.txt | grep -v pattern2 # Matches all lines in "*.txt" files containing "pattern1", Chapter 15. External Filters, Programs and Commands 236
- 243. Advanced Bash-Scripting Guide # but ***not*** "pattern2". The -c (--count) option gives a numerical count of matches, rather than actually listing the matches. grep -c txt *.sgml # (number of occurrences of "txt" in "*.sgml" files) # grep -cz . # ^ dot # means count (-c) zero-separated (-z) items matching "." # that is, non-empty ones (containing at least 1 character). # printf 'a bnc dnnnnn000n000e000000nf' | grep -cz . # 3 printf 'a bnc dnnnnn000n000e000000nf' | grep -cz '$' # 5 printf 'a bnc dnnnnn000n000e000000nf' | grep -cz '^' # 5 # printf 'a bnc dnnnnn000n000e000000nf' | grep -c '$' # 9 # By default, newline chars (n) separate items to match. # Note that the -z option is GNU "grep" specific. # Thanks, S.C. The --color (or --colour) option marks the matching string in color (on the console or in an xterm window). Since grep prints out each entire line containing the matching pattern, this lets you see exactly what is being matched. See also the -o option, which shows only the matching portion of the line(s). Example 15-16. Printing out the From lines in stored e-mail messages #!/bin/bash # from.sh # Emulates the useful "from" utility in Solaris, BSD, etc. # Echoes the "From" header line in all messages #+ in your e-mail directory. MAILDIR=~/mail/* # No quoting of variable. Why? GREP_OPTS="-H -A 5 --color" # Show file, plus extra context lines #+ and display "From" in color. TARGETSTR="^From" # "From" at beginning of line. for file in $MAILDIR # No quoting of variable. do grep $GREP_OPTS "$TARGETSTR" "$file" # ^^^^^^^^^^ # Again, do not quote this variable. echo done exit $? # Might wish to pipe the output of this script to 'more' or #+ redirect it to a file . . . When invoked with more than one target file given, grep specifies which file contains matches. bash$ grep Linux osinfo.txt misc.txt Chapter 15. External Filters, Programs and Commands 237
- 244. Advanced Bash-Scripting Guide osinfo.txt:This is a file containing information about Linux. osinfo.txt:The GPL governs the distribution of the Linux operating system. misc.txt:The Linux operating system is steadily gaining in popularity. To force grep to show the filename when searching only one target file, simply give /dev/null as the second file. bash$ grep Linux osinfo.txt /dev/null osinfo.txt:This is a file containing information about Linux. osinfo.txt:The GPL governs the distribution of the Linux operating system. If there is a successful match, grep returns an exit status of 0, which makes it useful in a condition test in a script, especially in combination with the -q option to suppress output. SUCCESS=0 # if grep lookup succeeds word=Linux filename=data.file grep -q "$word" "$filename" # The "-q" option #+ causes nothing to echo to stdout. if [ $? -eq $SUCCESS ] # if grep -q "$word" "$filename" can replace lines 5 - 7. then echo "$word found in $filename" else echo "$word not found in $filename" fi Example 29-6 demonstrates how to use grep to search for a word pattern in a system logfile. Example 15-17. Emulating grep in a script #!/bin/bash # grp.sh: Rudimentary reimplementation of grep. E_BADARGS=85 if [ -z "$1" ] # Check for argument to script. then echo "Usage: `basename $0` pattern" exit $E_BADARGS fi echo for file in * # Traverse all files in $PWD. do output=$(sed -n /"$1"/p $file) # Command substitution. if [ ! -z "$output" ] # What happens if "$output" is not quoted? then echo -n "$file: " echo "$output" fi # sed -ne "/$1/s|^|${file}: |p" is equivalent to above. echo done Chapter 15. External Filters, Programs and Commands 238
- 245. Advanced Bash-Scripting Guide echo exit 0 # Exercises: # --------- # 1) Add newlines to output, if more than one match in any given file. # 2) Add features. How can grep search for two (or more) separate patterns? What if you want grep to display all lines in a file or files that contain both "pattern1" and "pattern2"? One method is to pipe the result of grep pattern1 to grep pattern2. For example, given the following file: # Filename: tstfile This is a sample file. This is an ordinary text file. This file does not contain any unusual text. This file is not unusual. Here is some text. Now, let's search this file for lines containing both "file" and "text" . . . bash$ grep file tstfile # Filename: tstfile This is a sample file. This is an ordinary text file. This file does not contain any unusual text. This file is not unusual. bash$ grep file tstfile | grep text This is an ordinary text file. This file does not contain any unusual text. Now, for an interesting recreational use of grep . . . Example 15-18. Crossword puzzle solver #!/bin/bash # cw-solver.sh # This is actually a wrapper around a one-liner (line 46). # Crossword puzzle and anagramming word game solver. # You know *some* of the letters in the word you're looking for, #+ so you need a list of all valid words #+ with the known letters in given positions. # For example: w...i....n # 1???5????10 # w in position 1, 3 unknowns, i in the 5th, 4 unknowns, n at the end. # (See comments at end of script.) E_NOPATT=71 DICT=/usr/share/dict/word.lst # ^^^^^^^^ Looks for word list here. # ASCII word list, one word per line. Chapter 15. External Filters, Programs and Commands 239
- 246. Advanced Bash-Scripting Guide # If you happen to need an appropriate list, #+ download the author's "yawl" word list package. # http://ibiblio.org/pub/Linux/libs/yawl-0.3.2.tar.gz # or # http://bash.neuralshortcircuit.com/yawl-0.3.2.tar.gz if [ -z "$1" ] # If no word pattern specified then #+ as a command-line argument . . . echo #+ . . . then . . . echo "Usage:" #+ Usage message. echo echo ""$0" "pattern,"" echo "where "pattern" is in the form" echo "xxx..x.x..." echo echo "The x's represent known letters," echo "and the periods are unknown letters (blanks)." echo "Letters and periods can be in any position." echo "For example, try: sh cw-solver.sh w...i....n" echo exit $E_NOPATT fi echo # =============================================== # This is where all the work gets done. grep ^"$1"$ "$DICT" # Yes, only one line! # | | # ^ is start-of-word regex anchor. # $ is end-of-word regex anchor. # From _Stupid Grep Tricks_, vol. 1, #+ a book the ABS Guide author may yet get around #+ to writing . . . one of these days . . . # =============================================== echo exit $? # Script terminates here. # If there are too many words generated, #+ redirect the output to a file. $ sh cw-solver.sh w...i....n wellington workingman workingmen egrep -- extended grep -- is the same as grep -E. This uses a somewhat different, extended set of Regular Expressions, which can make the search a bit more flexible. It also allows the boolean | (or) operator. bash $ egrep 'matches|Matches' file.txt Line 1 matches. Line 3 Matches. Line 4 contains matches, but also Matches fgrep -- fast grep -- is the same as grep -F. It does a literal string search (no Regular Expressions), which generally speeds things up a bit. Chapter 15. External Filters, Programs and Commands 240
- 247. Advanced Bash-Scripting Guide On some Linux distros, egrep and fgrep are symbolic links to, or aliases for grep, but invoked with the -E and -F options, respectively. Example 15-19. Looking up definitions in Webster's 1913 Dictionary #!/bin/bash # dict-lookup.sh # This script looks up definitions in the 1913 Webster's Dictionary. # This Public Domain dictionary is available for download #+ from various sites, including #+ Project Gutenberg (http://www.gutenberg.org/etext/247). # # Convert it from DOS to UNIX format (with only LF at end of line) #+ before using it with this script. # Store the file in plain, uncompressed ASCII text. # Set DEFAULT_DICTFILE variable below to path/filename. E_BADARGS=85 MAXCONTEXTLINES=50 # Maximum number of lines to show. DEFAULT_DICTFILE="/usr/share/dict/webster1913-dict.txt" # Default dictionary file pathname. # Change this as necessary. # Note: # ---- # This particular edition of the 1913 Webster's #+ begins each entry with an uppercase letter #+ (lowercase for the remaining characters). # Only the *very first line* of an entry begins this way, #+ and that's why the search algorithm below works. if [[ -z $(echo "$1" | sed -n '/^[A-Z]/p') ]] # Must at least specify word to look up, and #+ it must start with an uppercase letter. then echo "Usage: `basename $0` Word-to-define [dictionary-file]" echo echo "Note: Word to look up must start with capital letter," echo "with the rest of the word in lowercase." echo "--------------------------------------------" echo "Examples: Abandon, Dictionary, Marking, etc." exit $E_BADARGS fi if [ -z "$2" ] # May specify different dictionary #+ as an argument to this script. then dictfile=$DEFAULT_DICTFILE else dictfile="$2" fi # --------------------------------------------------------- Definition=$(fgrep -A $MAXCONTEXTLINES "$1 " "$dictfile") # Definitions in form "Word ..." # # And, yes, "fgrep" is fast enough Chapter 15. External Filters, Programs and Commands 241
- 248. Advanced Bash-Scripting Guide #+ to search even a very large text file. # Now, snip out just the definition block. echo "$Definition" | sed -n '1,/^[A-Z]/p' | # Print from first line of output #+ to the first line of the next entry. sed '$d' | sed '$d' # Delete last two lines of output #+ (blank line and first line of next entry). # --------------------------------------------------------- exit $? # Exercises: # --------- # 1) Modify the script to accept any type of alphabetic input # + (uppercase, lowercase, mixed case), and convert it # + to an acceptable format for processing. # # 2) Convert the script to a GUI application, # + using something like 'gdialog' or 'zenity' . . . # The script will then no longer take its argument(s) # + from the command-line. # # 3) Modify the script to parse one of the other available # + Public Domain Dictionaries, such as the U.S. Census Bureau Gazetteer. See also Example A-41 for an example of speedy fgrep lookup on a large text file. agrep (approximate grep) extends the capabilities of grep to approximate matching. The search string may differ by a specified number of characters from the resulting matches. This utility is not part of the core Linux distribution. To search compressed files, use zgrep, zegrep, or zfgrep. These also work on non-compressed files, though slower than plain grep, egrep, fgrep. They are handy for searching through a mixed set of files, some compressed, some not. To search bzipped files, use bzgrep. look The command look works like grep, but does a lookup on a "dictionary," a sorted word list. By default, look searches for a match in /usr/dict/words, but a different dictionary file may be specified. Example 15-20. Checking words in a list for validity #!/bin/bash # lookup: Does a dictionary lookup on each word in a data file. file=words.data # Data file from which to read words to test. Chapter 15. External Filters, Programs and Commands 242
- 249. Advanced Bash-Scripting Guide echo while [ "$word" != end ] # Last word in data file. do # ^^^ read word # From data file, because of redirection at end of loop. look $word > /dev/null # Don't want to display lines in dictionary file. lookup=$? # Exit status of 'look' command. if [ "$lookup" -eq 0 ] then echo ""$word" is valid." else echo ""$word" is invalid." fi done <"$file" # Redirects stdin to $file, so "reads" come from there. echo exit 0 # ---------------------------------------------------------------- # Code below line will not execute because of "exit" command above. # Stephane Chazelas proposes the following, more concise alternative: while read word && [[ $word != end ]] do if look "$word" > /dev/null then echo ""$word" is valid." else echo ""$word" is invalid." fi done <"$file" exit 0 sed, awk Scripting languages especially suited for parsing text files and command output. May be embedded singly or in combination in pipes and shell scripts. sed Non-interactive "stream editor", permits using many ex commands in batch mode. It finds many uses in shell scripts. awk Programmable file extractor and formatter, good for manipulating and/or extracting fields (columns) in structured text files. Its syntax is similar to C. wc wc gives a "word count" on a file or I/O stream: bash $ wc /usr/share/doc/sed-4.1.2/README 13 70 447 README [13 lines 70 words 447 characters] wc -w gives only the word count. wc -l gives only the line count. wc -c gives only the byte count. wc -m gives only the character count. Chapter 15. External Filters, Programs and Commands 243
- 250. Advanced Bash-Scripting Guide wc -L gives only the length of the longest line. Using wc to count how many .txt files are in current working directory: $ ls *.txt | wc -l # Will work as long as none of the "*.txt" files #+ have a linefeed embedded in their name. # Alternative ways of doing this are: # find . -maxdepth 1 -name *.txt -print0 | grep -cz . # (shopt -s nullglob; set -- *.txt; echo $#) # Thanks, S.C. Using wc to total up the size of all the files whose names begin with letters in the range d - h bash$ wc [d-h]* | grep total | awk '{print $3}' 71832 Using wc to count the instances of the word "Linux" in the main source file for this book. bash$ grep Linux abs-book.sgml | wc -l 50 See also Example 15-39 and Example 19-8. Certain commands include some of the functionality of wc as options. ... | grep foo | wc -l # This frequently used construct can be more concisely rendered. ... | grep -c foo # Just use the "-c" (or "--count") option of grep. # Thanks, S.C. tr character translation filter. Must use quoting and/or brackets, as appropriate. Quotes prevent the shell from reinterpreting the special characters in tr command sequences. Brackets should be quoted to prevent expansion by the shell. Either tr "A-Z" "*" <filename or tr A-Z * <filename changes all the uppercase letters in filename to asterisks (writes to stdout). On some systems this may not work, but tr A-Z '[**]' will. The -d option deletes a range of characters. echo "abcdef" # abcdef echo "abcdef" | tr -d b-d # aef tr -d 0-9 <filename # Deletes all digits from the file "filename". The --squeeze-repeats (or -s) option deletes all but the first instance of a string of consecutive characters. This option is useful for removing excess whitespace. Chapter 15. External Filters, Programs and Commands 244
- 251. Advanced Bash-Scripting Guide bash$ echo "XXXXX" | tr --squeeze-repeats 'X' X The -c "complement" option inverts the character set to match. With this option, tr acts only upon those characters not matching the specified set. bash$ echo "acfdeb123" | tr -c b-d + +c+d+b++++ Note that tr recognizes POSIX character classes. [65] bash$ echo "abcd2ef1" | tr '[:alpha:]' - ----2--1 Example 15-21. toupper: Transforms a file to all uppercase. #!/bin/bash # Changes a file to all uppercase. E_BADARGS=85 if [ -z "$1" ] # Standard check for command-line arg. then echo "Usage: `basename $0` filename" exit $E_BADARGS fi tr a-z A-Z <"$1" # Same effect as above, but using POSIX character set notation: # tr '[:lower:]' '[:upper:]' <"$1" # Thanks, S.C. exit 0 # Exercise: # Rewrite this script to give the option of changing a file #+ to *either* upper or lowercase. Example 15-22. lowercase: Changes all filenames in working directory to lowercase. #!/bin/bash # # Changes every filename in working directory to all lowercase. # # Inspired by a script of John Dubois, #+ which was translated into Bash by Chet Ramey, #+ and considerably simplified by the author of the ABS Guide. for filename in * # Traverse all files in directory. do fname=`basename $filename` n=`echo $fname | tr A-Z a-z` # Change name to lowercase. if [ "$fname" != "$n" ] # Rename only files not already lowercase. then mv $fname $n fi done Chapter 15. External Filters, Programs and Commands 245
- 252. Advanced Bash-Scripting Guide exit $? # Code below this line will not execute because of "exit". #--------------------------------------------------------# # To run it, delete script above line. # The above script will not work on filenames containing blanks or newlines. # Stephane Chazelas therefore suggests the following alternative: for filename in * # Not necessary to use basename, # since "*" won't return any file containing "/". do n=`echo "$filename/" | tr '[:upper:]' '[:lower:]'` # POSIX char set notation. # Slash added so that trailing newlines are not # removed by command substitution. # Variable substitution: n=${n%/} # Removes trailing slash, added above, from filename. [[ $filename == $n ]] || mv "$filename" "$n" # Checks if filename already lowercase. done exit $? Example 15-23. du: DOS to UNIX text file conversion. #!/bin/bash # Du.sh: DOS to UNIX text file converter. E_WRONGARGS=65 if [ -z "$1" ] then echo "Usage: `basename $0` filename-to-convert" exit $E_WRONGARGS fi NEWFILENAME=$1.unx CR='015' # Carriage return. # 015 is octal ASCII code for CR. # Lines in a DOS text file end in CR-LF. # Lines in a UNIX text file end in LF only. tr -d $CR < $1 > $NEWFILENAME # Delete CR's and write to new file. echo "Original DOS text file is "$1"." echo "Converted UNIX text file is "$NEWFILENAME"." exit 0 # Exercise: # -------- # Change the above script to convert from UNIX to DOS. Example 15-24. rot13: ultra-weak encryption. Chapter 15. External Filters, Programs and Commands 246
- 253. Advanced Bash-Scripting Guide #!/bin/bash # rot13.sh: Classic rot13 algorithm, # encryption that might fool a 3-year old. # Usage: ./rot13.sh filename # or ./rot13.sh <filename # or ./rot13.sh and supply keyboard input (stdin) cat "$@" | tr 'a-zA-Z' 'n-za-mN-ZA-M' # "a" goes to "n", "b" to "o", etc. # The 'cat "$@"' construction #+ permits getting input either from stdin or from files. exit 0 Example 15-25. Generating "Crypto-Quote" Puzzles #!/bin/bash # crypto-quote.sh: Encrypt quotes # Will encrypt famous quotes in a simple monoalphabetic substitution. # The result is similar to the "Crypto Quote" puzzles #+ seen in the Op Ed pages of the Sunday paper. key=ETAOINSHRDLUBCFGJMQPVWZYXK # The "key" is nothing more than a scrambled alphabet. # Changing the "key" changes the encryption. # The 'cat "$@"' construction gets input either from stdin or from files. # If using stdin, terminate input with a Control-D. # Otherwise, specify filename as command-line parameter. cat "$@" | tr "a-z" "A-Z" | tr "A-Z" "$key" # | to uppercase | encrypt # Will work on lowercase, uppercase, or mixed-case quotes. # Passes non-alphabetic characters through unchanged. # Try this script with something like: # "Nothing so needs reforming as other people's habits." # --Mark Twain # # Output is: # "CFPHRCS QF CIIOQ MINFMBRCS EQ FPHIM GIFGUI'Q HETRPQ." # --BEML PZERC # To reverse the encryption: # cat "$@" | tr "$key" "A-Z" # This simple-minded cipher can be broken by an average 12-year old #+ using only pencil and paper. exit 0 # Exercise: # -------- # Modify the script so that it will either encrypt or decrypt, #+ depending on command-line argument(s). Chapter 15. External Filters, Programs and Commands 247
- 254. Advanced Bash-Scripting Guide tr variants The tr utility has two historic variants. The BSD version does not use brackets (tr a-z A-Z), but the SysV one does (tr '[a-z]' '[A-Z]'). The GNU version of tr resembles the BSD one. fold A filter that wraps lines of input to a specified width. This is especially useful with the -s option, which breaks lines at word spaces (see Example 15-26 and Example A-1). fmt Simple-minded file formatter, used as a filter in a pipe to "wrap" long lines of text output. Example 15-26. Formatted file listing. #!/bin/bash WIDTH=40 # 40 columns wide. b=`ls /usr/local/bin` # Get a file listing... echo $b | fmt -w $WIDTH # Could also have been done by # echo $b | fold - -s -w $WIDTH exit 0 See also Example 15-5. A powerful alternative to fmt is Kamil Toman's par utility, available from http://www.cs.berkeley.edu/~amc/Par/. col This deceptively named filter removes reverse line feeds from an input stream. It also attempts to replace whitespace with equivalent tabs. The chief use of col is in filtering the output from certain text processing utilities, such as groff and tbl. column Column formatter. This filter transforms list-type text output into a "pretty-printed" table by inserting tabs at appropriate places. Example 15-27. Using column to format a directory listing #!/bin/bash # colms.sh # A minor modification of the example file in the "column" man page. (printf "PERMISSIONS LINKS OWNER GROUP SIZE MONTH DAY HH:MM PROG-NAMEn" ; ls -l | sed 1d) | column -t # ^^^^^^ ^^ # The "sed 1d" in the pipe deletes the first line of output, #+ which would be "total N", #+ where "N" is the total number of files found by "ls -l". # The -t option to "column" pretty-prints a table. Chapter 15. External Filters, Programs and Commands 248
- 255. Advanced Bash-Scripting Guide exit 0 colrm Column removal filter. This removes columns (characters) from a file and writes the file, lacking the range of specified columns, back to stdout. colrm 2 4 <filename removes the second through fourth characters from each line of the text file filename. If the file contains tabs or nonprintable characters, this may cause unpredictable behavior. In such cases, consider using expand and unexpand in a pipe preceding colrm. nl Line numbering filter: nl filename lists filename to stdout, but inserts consecutive numbers at the beginning of each non-blank line. If filename omitted, operates on stdin. The output of nl is very similar to cat -b, since, by default nl does not list blank lines. Example 15-28. nl: A self-numbering script. #!/bin/bash # line-number.sh # This script echoes itself twice to stdout with its lines numbered. # 'nl' sees this as line 4 since it does not number blank lines. # 'cat -n' sees the above line as number 6. nl `basename $0` echo; echo # Now, let's try it with 'cat -n' cat -n `basename $0` # The difference is that 'cat -n' numbers the blank lines. # Note that 'nl -ba' will also do so. exit 0 # ----------------------------------------------------------------- pr Print formatting filter. This will paginate files (or stdout) into sections suitable for hard copy printing or viewing on screen. Various options permit row and column manipulation, joining lines, setting margins, numbering lines, adding page headers, and merging files, among other things. The pr command combines much of the functionality of nl, paste, fold, column, and expand. pr -o 5 --width=65 fileZZZ | more gives a nice paginated listing to screen of fileZZZ with margins set at 5 and 65. A particularly useful option is -d, forcing double-spacing (same effect as sed -G). gettext The GNU gettext package is a set of utilities for localizing and translating the text output of programs into foreign languages. While originally intended for C programs, it now supports quite a number of programming and scripting languages. The gettext program works on shell scripts. See the info page. msgfmt Chapter 15. External Filters, Programs and Commands 249
- 256. Advanced Bash-Scripting Guide A program for generating binary message catalogs. It is used for localization. iconv A utility for converting file(s) to a different encoding (character set). Its chief use is for localization. # Convert a string from UTF-8 to UTF-16 and print to the BookList function write_utf8_string { STRING=$1 BOOKLIST=$2 echo -n "$STRING" | iconv -f UTF8 -t UTF16 | cut -b 3- | tr -d n >> "$BOOKLIST" } # From Peter Knowles' "booklistgen.sh" script #+ for converting files to Sony Librie/PRS-50X format. # (http://booklistgensh.peterknowles.com) recode Consider this a fancier version of iconv, above. This very versatile utility for converting a file to a different encoding scheme. Note that recode is not part of the standard Linux installation. TeX, gs TeX and Postscript are text markup languages used for preparing copy for printing or formatted video display. TeX is Donald Knuth's elaborate typsetting system. It is often convenient to write a shell script encapsulating all the options and arguments passed to one of these markup languages. Ghostscript (gs) is a GPL-ed Postscript interpreter. texexec Utility for processing TeX and pdf files. Found in /usr/bin on many Linux distros, it is actually a shell wrapper that calls Perl to invoke Tex. texexec --pdfarrange --result=Concatenated.pdf *pdf # Concatenates all the pdf files in the current working directory #+ into the merged file, Concatenated.pdf . . . # (The --pdfarrange option repaginates a pdf file. See also --pdfcombine.) # The above command-line could be parameterized and put into a shell script. enscript Utility for converting plain text file to PostScript For example, enscript filename.txt -p filename.ps produces the PostScript output file filename.ps. groff, tbl, eqn Yet another text markup and display formatting language is groff. This is the enhanced GNU version of the venerable UNIX roff/troff display and typesetting package. Manpages use groff. The tbl table processing utility is considered part of groff, as its function is to convert table markup into groff commands. The eqn equation processing utility is likewise part of groff, and its function is to convert equation markup into groff commands. Example 15-29. manview: Viewing formatted manpages Chapter 15. External Filters, Programs and Commands 250
- 257. Advanced Bash-Scripting Guide #!/bin/bash # manview.sh: Formats the source of a man page for viewing. # This script is useful when writing man page source. # It lets you look at the intermediate results on the fly #+ while working on it. E_WRONGARGS=85 if [ -z "$1" ] then echo "Usage: `basename $0` filename" exit $E_WRONGARGS fi # --------------------------- groff -Tascii -man $1 | less # From the man page for groff. # --------------------------- # If the man page includes tables and/or equations, #+ then the above code will barf. # The following line can handle such cases. # # gtbl < "$1" | geqn -Tlatin1 | groff -Tlatin1 -mtty-char -man # # Thanks, S.C. exit $? # See also the "maned.sh" script. See also Example A-39. lex, yacc The lex lexical analyzer produces programs for pattern matching. This has been replaced by the nonproprietary flex on Linux systems. The yacc utility creates a parser based on a set of specifications. This has been replaced by the nonproprietary bison on Linux systems. 15.5. File and Archiving Commands Archiving tar The standard UNIX archiving utility. [66] Originally a Tape ARchiving program, it has developed into a general purpose package that can handle all manner of archiving with all types of destination devices, ranging from tape drives to regular files to even stdout (see Example 3-4). GNU tar has been patched to accept various compression filters, for example: tar czvf archive_name.tar.gz *, which recursively archives and gzips all files in a directory tree except dotfiles in the current working directory ($PWD). [67] Some useful tar options: 1. -c create (a new archive) 2. -x extract (files from existing archive) Chapter 15. External Filters, Programs and Commands 251
- 258. Advanced Bash-Scripting Guide 3. --delete delete (files from existing archive) This option will not work on magnetic tape devices. 4. -r append (files to existing archive) 5. -A append (tar files to existing archive) 6. -t list (contents of existing archive) 7. -u update archive 8. -d compare archive with specified filesystem 9. --after-date only process files with a date stamp after specified date 10. -z gzip the archive (compress or uncompress, depending on whether combined with the -c or -x) option 11. -j bzip2 the archive It may be difficult to recover data from a corrupted gzipped tar archive. When archiving important files, make multiple backups. shar Shell archiving utility. The text files in a shell archive are concatenated without compression, and the resultant archive is essentially a shell script, complete with #!/bin/sh header, containing all the necessary unarchiving commands, as well as the files themselves. Shar archives still show up in Usenet newsgroups, but otherwise shar has been replaced by tar/gzip. The unshar command unpacks shar archives. The mailshar command is a Bash script that uses shar to concatenate multiple files into a single one for e-mailing. This script supports compression and uuencoding. ar Creation and manipulation utility for archives, mainly used for binary object file libraries. rpm The Red Hat Package Manager, or rpm utility provides a wrapper for source or binary archives. It includes commands for installing and checking the integrity of packages, among other things. A simple rpm -i package_name.rpm usually suffices to install a package, though there are many more options available. rpm -qf identifies which package a file originates from. bash$ rpm -qf /bin/ls coreutils-5.2.1-31 rpm -qa gives a complete list of all installed rpm packages on a given system. An rpm -qa package_name lists only the package(s) corresponding to package_name. bash$ rpm -qa redhat-logos-1.1.3-1 glibc-2.2.4-13 cracklib-2.7-12 dosfstools-2.7-1 gdbm-1.8.0-10 ksymoops-2.4.1-1 Chapter 15. External Filters, Programs and Commands 252
- 259. Advanced Bash-Scripting Guide mktemp-1.5-11 perl-5.6.0-17 reiserfs-utils-3.x.0j-2 ... bash$ rpm -qa docbook-utils docbook-utils-0.6.9-2 bash$ rpm -qa docbook | grep docbook docbook-dtd31-sgml-1.0-10 docbook-style-dsssl-1.64-3 docbook-dtd30-sgml-1.0-10 docbook-dtd40-sgml-1.0-11 docbook-utils-pdf-0.6.9-2 docbook-dtd41-sgml-1.0-10 docbook-utils-0.6.9-2 cpio This specialized archiving copy command (copy input and output) is rarely seen any more, having been supplanted by tar/gzip. It still has its uses, such as moving a directory tree. With an appropriate block size (for copying) specified, it can be appreciably faster than tar. Example 15-30. Using cpio to move a directory tree #!/bin/bash # Copying a directory tree using cpio. # Advantages of using 'cpio': # Speed of copying. It's faster than 'tar' with pipes. # Well suited for copying special files (named pipes, etc.) #+ that 'cp' may choke on. ARGS=2 E_BADARGS=65 if [ $# -ne "$ARGS" ] then echo "Usage: `basename $0` source destination" exit $E_BADARGS fi source="$1" destination="$2" ################################################################### find "$source" -depth | cpio -admvp "$destination" # ^^^^^ ^^^^^ # Read the 'find' and 'cpio' info pages to decipher these options. # The above works only relative to $PWD (current directory) . . . #+ full pathnames are specified. ################################################################### # Exercise: # -------- Chapter 15. External Filters, Programs and Commands 253
- 260. Advanced Bash-Scripting Guide # Add code to check the exit status ($?) of the 'find | cpio' pipe #+ and output appropriate error messages if anything went wrong. exit $? rpm2cpio This command extracts a cpio archive from an rpm one. Example 15-31. Unpacking an rpm archive #!/bin/bash # de-rpm.sh: Unpack an 'rpm' archive : ${1?"Usage: `basename $0` target-file"} # Must specify 'rpm' archive name as an argument. TEMPFILE=$$.cpio # Tempfile with "unique" name. # $$ is process ID of script. rpm2cpio < $1 > $TEMPFILE # Converts rpm archive into #+ cpio archive. cpio --make-directories -F $TEMPFILE -i # Unpacks cpio archive. rm -f $TEMPFILE # Deletes cpio archive. exit 0 # Exercise: # Add check for whether 1) "target-file" exists and #+ 2) it is an rpm archive. # Hint: Parse output of 'file' command. pax The pax portable archive exchange toolkit facilitates periodic file backups and is designed to be cross-compatible between various flavors of UNIX. It was ported from BSD to Linux. pax -wf daily_backup.pax ~/linux-server/files # Creates a tar archive of all files in the target directory. # Note that the options to pax must be in the correct order -- #+ pax -fw has an entirely different effect. pax -f daily_backup.pax # Lists the files in the archive. pax -rf daily_backup.pax ~/bsd-server/files # Restores the backed-up files from the Linux machine #+ onto a BSD one. Note that pax handles many of the standard archiving and compression commands. Compression gzip The standard GNU/UNIX compression utility, replacing the inferior and proprietary compress. The corresponding decompression command is gunzip, which is the equivalent of gzip -d. The -c option sends the output of gzip to stdout. This is useful when piping to other commands. Chapter 15. External Filters, Programs and Commands 254
- 261. Advanced Bash-Scripting Guide The zcat filter decompresses a gzipped file to stdout, as possible input to a pipe or redirection. This is, in effect, a cat command that works on compressed files (including files processed with the older compress utility). The zcat command is equivalent to gzip -dc. On some commercial UNIX systems, zcat is a synonym for uncompress -c, and will not work on gzipped files. See also Example 7-7. bzip2 An alternate compression utility, usually more efficient (but slower) than gzip, especially on large files. The corresponding decompression command is bunzip2. Similar to the zcat command, bzcat decompresses a bzipped2-ed file to stdout. Newer versions of tar have been patched with bzip2 support. compress, uncompress This is an older, proprietary compression utility found in commercial UNIX distributions. The more efficient gzip has largely replaced it. Linux distributions generally include a compress workalike for compatibility, although gunzip can unarchive files treated with compress. The znew command transforms compressed files into gzipped ones. sq Yet another compression (squeeze) utility, a filter that works only on sorted ASCII word lists. It uses the standard invocation syntax for a filter, sq < input-file > output-file. Fast, but not nearly as efficient as gzip. The corresponding uncompression filter is unsq, invoked like sq. The output of sq may be piped to gzip for further compression. zip, unzip Cross-platform file archiving and compression utility compatible with DOS pkzip.exe. "Zipped" archives seem to be a more common medium of file exchange on the Internet than "tarballs." unarc, unarj, unrar These Linux utilities permit unpacking archives compressed with the DOS arc.exe, arj.exe, and rar.exe programs. lzma, unlzma, lzcat Highly efficient Lempel-Ziv-Markov compression. The syntax of lzma is similar to that of gzip. The 7-zip Website has more information. File Information file A utility for identifying file types. The command file file-name will return a file specification for file-name, such as ascii text or data. It references the magic numbers found in /usr/share/magic, /etc/magic, or /usr/lib/magic, depending on the Linux/UNIX distribution. The -f option causes file to run in batch mode, to read from a designated file a list of filenames to analyze. The -z option, when used on a compressed target file, forces an attempt to analyze the uncompressed file type. bash$ file test.tar.gz Chapter 15. External Filters, Programs and Commands 255
- 262. Advanced Bash-Scripting Guide test.tar.gz: gzip compressed data, deflated, last modified: Sun Sep 16 13:34:51 2001, os: Unix bash file -z test.tar.gz test.tar.gz: GNU tar archive (gzip compressed data, deflated, last modified: Sun Sep 16 13:34:51 2001, os: Unix) # Find sh and Bash scripts in a given directory: DIRECTORY=/usr/local/bin KEYWORD=Bourne # Bourne and Bourne-Again shell scripts file $DIRECTORY/* | fgrep $KEYWORD # Output: # /usr/local/bin/burn-cd: Bourne-Again shell script text executable # /usr/local/bin/burnit: Bourne-Again shell script text executable # /usr/local/bin/cassette.sh: Bourne shell script text executable # /usr/local/bin/copy-cd: Bourne-Again shell script text executable # . . . Example 15-32. Stripping comments from C program files #!/bin/bash # strip-comment.sh: Strips out the comments (/* COMMENT */) in a C program. E_NOARGS=0 E_ARGERROR=66 E_WRONG_FILE_TYPE=67 if [ $# -eq "$E_NOARGS" ] then echo "Usage: `basename $0` C-program-file" >&2 # Error message to stderr. exit $E_ARGERROR fi # Test for correct file type. type=`file $1 | awk '{ print $2, $3, $4, $5 }'` # "file $1" echoes file type . . . # Then awk removes the first field, the filename . . . # Then the result is fed into the variable "type." correct_type="ASCII C program text" if [ "$type" != "$correct_type" ] then echo echo "This script works on C program files only." echo exit $E_WRONG_FILE_TYPE fi # Rather cryptic sed script: #-------- sed ' /^/*/d /.**//d ' $1 Chapter 15. External Filters, Programs and Commands 256
- 263. Advanced Bash-Scripting Guide #-------- # Easy to understand if you take several hours to learn sed fundamentals. # Need to add one more line to the sed script to deal with #+ case where line of code has a comment following it on same line. # This is left as a non-trivial exercise. # Also, the above code deletes non-comment lines with a "*/" . . . #+ not a desirable result. exit 0 # ---------------------------------------------------------------- # Code below this line will not execute because of 'exit 0' above. # Stephane Chazelas suggests the following alternative: usage() { echo "Usage: `basename $0` C-program-file" >&2 exit 1 } WEIRD=`echo -n -e '377'` # or WEIRD=$'377' [[ $# -eq 1 ]] || usage case `file "$1"` in *"C program text"*) sed -e "s%/*%${WEIRD}%g;s%*/%${WEIRD}%g" "$1" | tr '377n' 'n377' | sed -ne 'p;n' | tr -d 'n' | tr '377' 'n';; *) usage;; esac # This is still fooled by things like: # printf("/*"); # or # /* /* buggy embedded comment */ # # To handle all special cases (comments in strings, comments in string #+ where there is a ", " ...), #+ the only way is to write a C parser (using lex or yacc perhaps?). exit 0 which which command gives the full path to "command." This is useful for finding out whether a particular command or utility is installed on the system. $bash which rm /usr/bin/rm For an interesting use of this command, see Example 33-14. whereis Similar to which, above, whereis command gives the full path to "command," but also to its manpage. $bash whereis rm Chapter 15. External Filters, Programs and Commands 257
- 264. Advanced Bash-Scripting Guide rm: /bin/rm /usr/share/man/man1/rm.1.bz2 whatis whatis command looks up "command" in the whatis database. This is useful for identifying system commands and important configuration files. Consider it a simplified man command. $bash whatis whatis whatis (1) - search the whatis database for complete words Example 15-33. Exploring /usr/X11R6/bin #!/bin/bash # What are all those mysterious binaries in /usr/X11R6/bin? DIRECTORY="/usr/X11R6/bin" # Try also "/bin", "/usr/bin", "/usr/local/bin", etc. for file in $DIRECTORY/* do whatis `basename $file` # Echoes info about the binary. done exit 0 # You may wish to redirect output of this script, like so: # ./what.sh >>whatis.db # or view it a page at a time on stdout, # ./what.sh | less See also Example 10-3. vdir Show a detailed directory listing. The effect is similar to ls -lb. This is one of the GNU fileutils. bash$ vdir total 10 -rw-r--r-- 1 bozo bozo 4034 Jul 18 22:04 data1.xrolo -rw-r--r-- 1 bozo bozo 4602 May 25 13:58 data1.xrolo.bak -rw-r--r-- 1 bozo bozo 877 Dec 17 2000 employment.xrolo bash ls -l total 10 -rw-r--r-- 1 bozo bozo 4034 Jul 18 22:04 data1.xrolo -rw-r--r-- 1 bozo bozo 4602 May 25 13:58 data1.xrolo.bak -rw-r--r-- 1 bozo bozo 877 Dec 17 2000 employment.xrolo locate, slocate The locate command searches for files using a database stored for just that purpose. The slocate command is the secure version of locate (which may be aliased to slocate). $bash locate hickson /usr/lib/xephem/catalogs/hickson.edb getfacl, setfacl These commands retrieve or set the file access control list -- the owner, group, and file permissions. Chapter 15. External Filters, Programs and Commands 258
- 265. Advanced Bash-Scripting Guide bash$ getfacl * # file: test1.txt # owner: bozo # group: bozgrp user::rw- group::rw- other::r-- # file: test2.txt # owner: bozo # group: bozgrp user::rw- group::rw- other::r-- bash$ setfacl -m u:bozo:rw yearly_budget.csv bash$ getfacl yearly_budget.csv # file: yearly_budget.csv # owner: accountant # group: budgetgrp user::rw- user:bozo:rw- user:accountant:rw- group::rw- mask::rw- other::r-- readlink Disclose the file that a symbolic link points to. bash$ readlink /usr/bin/awk ../../bin/gawk strings Use the strings command to find printable strings in a binary or data file. It will list sequences of printable characters found in the target file. This might be handy for a quick 'n dirty examination of a core dump or for looking at an unknown graphic image file (strings image-file | more might show something like JFIF, which would identify the file as a jpeg graphic). In a script, you would probably parse the output of strings with grep or sed. See Example 10-7 and Example 10-9. Example 15-34. An "improved" strings command #!/bin/bash # wstrings.sh: "word-strings" (enhanced "strings" command) # # This script filters the output of "strings" by checking it #+ against a standard word list file. # This effectively eliminates gibberish and noise, #+ and outputs only recognized words. # =========================================================== # Standard Check for Script Argument(s) ARGS=1 E_BADARGS=85 E_NOFILE=86 Chapter 15. External Filters, Programs and Commands 259
- 266. Advanced Bash-Scripting Guide if [ $# -ne $ARGS ] then echo "Usage: `basename $0` filename" exit $E_BADARGS fi if [ ! -f "$1" ] # Check if file exists. then echo "File "$1" does not exist." exit $E_NOFILE fi # =========================================================== MINSTRLEN=3 # Minimum string length. WORDFILE=/usr/share/dict/linux.words # Dictionary file. # May specify a different word list file #+ of one-word-per-line format. # For example, the "yawl" word-list package, # http://bash.neuralshortcircuit.com/yawl-0.3.2.tar.gz wlist=`strings "$1" | tr A-Z a-z | tr '[:space:]' Z | tr -cs '[:alpha:]' Z | tr -s '173-377' Z | tr Z ' '` # Translate output of 'strings' command with multiple passes of 'tr'. # "tr A-Z a-z" converts to lowercase. # "tr '[:space:]'" converts whitespace characters to Z's. # "tr -cs '[:alpha:]' Z" converts non-alphabetic characters to Z's, #+ and squeezes multiple consecutive Z's. # "tr -s '173-377' Z" converts all characters past 'z' to Z's #+ and squeezes multiple consecutive Z's, #+ which gets rid of all the weird characters that the previous #+ translation failed to deal with. # Finally, "tr Z ' '" converts all those Z's to whitespace, #+ which will be seen as word separators in the loop below. # **************************************************************** # Note the technique of feeding the output of 'tr' back to itself, #+ but with different arguments and/or options on each pass. # **************************************************************** for word in $wlist # Important: # $wlist must not be quoted here. # "$wlist" does not work. # Why not? do strlen=${#word} # String length. if [ "$strlen" -lt "$MINSTRLEN" ] # Skip over short strings. then continue fi grep -Fw $word "$WORDFILE" # Match whole words only. # ^^^ # "Fixed strings" and #+ "whole words" options. done Chapter 15. External Filters, Programs and Commands 260
- 267. Advanced Bash-Scripting Guide exit $? Comparison diff, patch diff: flexible file comparison utility. It compares the target files line-by-line sequentially. In some applications, such as comparing word dictionaries, it may be helpful to filter the files through sort and uniq before piping them to diff. diff file-1 file-2 outputs the lines in the files that differ, with carets showing which file each particular line belongs to. The --side-by-side option to diff outputs each compared file, line by line, in separate columns, with non-matching lines marked. The -c and -u options likewise make the output of the command easier to interpret. There are available various fancy frontends for diff, such as sdiff, wdiff, xdiff, and mgdiff. The diff command returns an exit status of 0 if the compared files are identical, and 1 if they differ. This permits use of diff in a test construct within a shell script (see below). A common use for diff is generating difference files to be used with patch The -e option outputs files suitable for ed or ex scripts. patch: flexible versioning utility. Given a difference file generated by diff, patch can upgrade a previous version of a package to a newer version. It is much more convenient to distribute a relatively small "diff" file than the entire body of a newly revised package. Kernel "patches" have become the preferred method of distributing the frequent releases of the Linux kernel. patch -p1 <patch-file # Takes all the changes listed in 'patch-file' # and applies them to the files referenced therein. # This upgrades to a newer version of the package. Patching the kernel: cd /usr/src gzip -cd patchXX.gz | patch -p0 # Upgrading kernel source using 'patch'. # From the Linux kernel docs "README", # by anonymous author (Alan Cox?). The diff command can also recursively compare directories (for the filenames present). bash$ diff -r ~/notes1 ~/notes2 Only in /home/bozo/notes1: file02 Only in /home/bozo/notes1: file03 Only in /home/bozo/notes2: file04 Use zdiff to compare gzipped files. Chapter 15. External Filters, Programs and Commands 261
- 268. Advanced Bash-Scripting Guide Use diffstat to create a histogram (point-distribution graph) of output from diff. diff3, merge An extended version of diff that compares three files at a time. This command returns an exit value of 0 upon successful execution, but unfortunately this gives no information about the results of the comparison. bash$ diff3 file-1 file-2 file-3 ==== 1:1c This is line 1 of "file-1". 2:1c This is line 1 of "file-2". 3:1c This is line 1 of "file-3" The merge (3-way file merge) command is an interesting adjunct to diff3. Its syntax is merge Mergefile file1 file2. The result is to output to Mergefile the changes that lead from file1 to file2. Consider this command a stripped-down version of patch. sdiff Compare and/or edit two files in order to merge them into an output file. Because of its interactive nature, this command would find little use in a script. cmp The cmp command is a simpler version of diff, above. Whereas diff reports the differences between two files, cmp merely shows at what point they differ. Like diff, cmp returns an exit status of 0 if the compared files are identical, and 1 if they differ. This permits use in a test construct within a shell script. Example 15-35. Using cmp to compare two files within a script. #!/bin/bash ARGS=2 # Two args to script expected. E_BADARGS=65 E_UNREADABLE=66 if [ $# -ne "$ARGS" ] then echo "Usage: `basename $0` file1 file2" exit $E_BADARGS fi if [[ ! -r "$1" || ! -r "$2" ]] then echo "Both files to be compared must exist and be readable." exit $E_UNREADABLE fi cmp $1 $2 &> /dev/null # /dev/null buries the output of the "cmp" command. # cmp -s $1 $2 has same result ("-s" silent flag to "cmp") # Thank you Anders Gustavsson for pointing this out. # # Also works with 'diff', i.e., diff $1 $2 &> /dev/null if [ $? -eq 0 ] # Test exit status of "cmp" command. then Chapter 15. External Filters, Programs and Commands 262
- 269. Advanced Bash-Scripting Guide echo "File "$1" is identical to file "$2"." else echo "File "$1" differs from file "$2"." fi exit 0 Use zcmp on gzipped files. comm Versatile file comparison utility. The files must be sorted for this to be useful. comm -options first-file second-file comm file-1 file-2 outputs three columns: ◊ column 1 = lines unique to file-1 ◊ column 2 = lines unique to file-2 ◊ column 3 = lines common to both. The options allow suppressing output of one or more columns. ◊ -1 suppresses column 1 ◊ -2 suppresses column 2 ◊ -3 suppresses column 3 ◊ -12 suppresses both columns 1 and 2, etc. This command is useful for comparing "dictionaries" or word lists -- sorted text files with one word per line. Utilities basename Strips the path information from a file name, printing only the file name. The construction basename $0 lets the script know its name, that is, the name it was invoked by. This can be used for "usage" messages if, for example a script is called with missing arguments: echo "Usage: `basename $0` arg1 arg2 ... argn" dirname Strips the basename from a filename, printing only the path information. basename and dirname can operate on any arbitrary string. The argument does not need to refer to an existing file, or even be a filename for that matter (see Example A-7). Example 15-36. basename and dirname #!/bin/bash a=/home/bozo/daily-journal.txt echo "Basename of /home/bozo/daily-journal.txt = `basename $a`" echo "Dirname of /home/bozo/daily-journal.txt = `dirname $a`" echo echo "My own home is `basename ~/`." # `basename ~` also works. Chapter 15. External Filters, Programs and Commands 263
- 270. Advanced Bash-Scripting Guide echo "The home of my home is `dirname ~/`." # `dirname ~` also works. exit 0 split, csplit These are utilities for splitting a file into smaller chunks. Their usual use is for splitting up large files in order to back them up on floppies or preparatory to e-mailing or uploading them. The csplit command splits a file according to context, the split occuring where patterns are matched. Example 15-37. A script that copies itself in sections #!/bin/bash # splitcopy.sh # A script that splits itself into chunks, #+ then reassembles the chunks into an exact copy #+ of the original script. CHUNKSIZE=4 # Size of first chunk of split files. OUTPREFIX=xx # csplit prefixes, by default, #+ files with "xx" ... csplit "$0" "$CHUNKSIZE" # Some comment lines for padding . . . # Line 15 # Line 16 # Line 17 # Line 18 # Line 19 # Line 20 cat "$OUTPREFIX"* > "$0.copy" # Concatenate the chunks. rm "$OUTPREFIX"* # Get rid of the chunks. exit $? Encoding and Encryption sum, cksum, md5sum, sha1sum These are utilities for generating checksums. A checksum is a number [68] mathematically calculated from the contents of a file, for the purpose of checking its integrity. A script might refer to a list of checksums for security purposes, such as ensuring that the contents of key system files have not been altered or corrupted. For security applications, use the md5sum (message digest 5 checksum) command, or better yet, the newer sha1sum (Secure Hash Algorithm). [69] bash$ cksum /boot/vmlinuz 1670054224 804083 /boot/vmlinuz bash$ echo -n "Top Secret" | cksum 3391003827 10 bash$ md5sum /boot/vmlinuz 0f43eccea8f09e0a0b2b5cf1dcf333ba /boot/vmlinuz Chapter 15. External Filters, Programs and Commands 264
- 271. Advanced Bash-Scripting Guide bash$ echo -n "Top Secret" | md5sum 8babc97a6f62a4649716f4df8d61728f - The cksum command shows the size, in bytes, of its target, whether file or stdout. The md5sum and sha1sum commands display a dash when they receive their input from stdout. Example 15-38. Checking file integrity #!/bin/bash # file-integrity.sh: Checking whether files in a given directory # have been tampered with. E_DIR_NOMATCH=70 E_BAD_DBFILE=71 dbfile=File_record.md5 # Filename for storing records (database file). set_up_database () { echo ""$directory"" > "$dbfile" # Write directory name to first line of file. md5sum "$directory"/* >> "$dbfile" # Append md5 checksums and filenames. } check_database () { local n=0 local filename local checksum # ------------------------------------------- # # This file check should be unnecessary, #+ but better safe than sorry. if [ ! -r "$dbfile" ] then echo "Unable to read checksum database file!" exit $E_BAD_DBFILE fi # ------------------------------------------- # while read record[n] do directory_checked="${record[0]}" if [ "$directory_checked" != "$directory" ] then echo "Directories do not match up!" # Tried to use file for a different directory. exit $E_DIR_NOMATCH fi if [ "$n" -gt 0 ] # Not directory name. Chapter 15. External Filters, Programs and Commands 265
- 272. Advanced Bash-Scripting Guide then filename[n]=$( echo ${record[$n]} | awk '{ print $2 }' ) # md5sum writes records backwards, #+ checksum first, then filename. checksum[n]=$( md5sum "${filename[n]}" ) if [ "${record[n]}" = "${checksum[n]}" ] then echo "${filename[n]} unchanged." elif [ "`basename ${filename[n]}`" != "$dbfile" ] # Skip over checksum database file, #+ as it will change with each invocation of script. # --- # This unfortunately means that when running #+ this script on $PWD, tampering with the #+ checksum database file will not be detected. # Exercise: Fix this. then echo "${filename[n]} : CHECKSUM ERROR!" # File has been changed since last checked. fi fi let "n+=1" done <"$dbfile" # Read from checksum database file. } # =================================================== # # main () if [ -z "$1" ] then directory="$PWD" # If not specified, else #+ use current working directory. directory="$1" fi clear # Clear screen. echo " Running file integrity check on $directory" echo # ------------------------------------------------------------------ # if [ ! -r "$dbfile" ] # Need to create database file? then echo "Setting up database file, ""$directory"/"$dbfile""."; echo set_up_database fi # ------------------------------------------------------------------ # check_database # Do the actual work. echo # You may wish to redirect the stdout of this script to a file, #+ especially if the directory checked has many files in it. Chapter 15. External Filters, Programs and Commands 266
- 273. Advanced Bash-Scripting Guide exit 0 # For a much more thorough file integrity check, #+ consider the "Tripwire" package, #+ http://sourceforge.net/projects/tripwire/. Also see Example A-19, Example 33-14, and Example 9-11 for creative uses of the md5sum command. There have been reports that the 128-bit md5sum can be cracked, so the more secure 160-bit sha1sum is a welcome new addition to the checksum toolkit. bash$ md5sum testfile e181e2c8720c60522c4c4c981108e367 testfile bash$ sha1sum testfile 5d7425a9c08a66c3177f1e31286fa40986ffc996 testfile Security consultants have demonstrated that even sha1sum can be compromised. Fortunately, newer Linux distros include longer bit-length sha224sum, sha256sum, sha384sum, and sha512sum commands. uuencode This utility encodes binary files (images, sound files, compressed files, etc.) into ASCII characters, making them suitable for transmission in the body of an e-mail message or in a newsgroup posting. This is especially useful where MIME (multimedia) encoding is not available. uudecode This reverses the encoding, decoding uuencoded files back into the original binaries. Example 15-39. Uudecoding encoded files #!/bin/bash # Uudecodes all uuencoded files in current working directory. lines=35 # Allow 35 lines for the header (very generous). for File in * # Test all the files in $PWD. do search1=`head -n $lines $File | grep begin | wc -w` search2=`tail -n $lines $File | grep end | wc -w` # Uuencoded files have a "begin" near the beginning, #+ and an "end" near the end. if [ "$search1" -gt 0 ] then if [ "$search2" -gt 0 ] then echo "uudecoding - $File -" uudecode $File fi fi done # Note that running this script upon itself fools it #+ into thinking it is a uuencoded file, #+ because it contains both "begin" and "end". # Exercise: Chapter 15. External Filters, Programs and Commands 267
- 274. Advanced Bash-Scripting Guide # -------- # Modify this script to check each file for a newsgroup header, #+ and skip to next if not found. exit 0 The fold -s command may be useful (possibly in a pipe) to process long uudecoded text messages downloaded from Usenet newsgroups. mimencode, mmencode The mimencode and mmencode commands process multimedia-encoded e-mail attachments. Although mail user agents (such as pine or kmail) normally handle this automatically, these particular utilities permit manipulating such attachments manually from the command-line or in batch processing mode by means of a shell script. crypt At one time, this was the standard UNIX file encryption utility. [70] Politically-motivated government regulations prohibiting the export of encryption software resulted in the disappearance of crypt from much of the UNIX world, and it is still missing from most Linux distributions. Fortunately, programmers have come up with a number of decent alternatives to it, among them the author's very own cruft (see Example A-4). openssl This is an Open Source implementation of Secure Sockets Layer encryption. # To encrypt a file: openssl aes-128-ecb -salt -in file.txt -out file.encrypted -pass pass:my_password # ^^^^^^^^^^^ User-selected password. # aes-128-ecb is the encryption method chosen. # To decrypt an openssl-encrypted file: openssl aes-128-ecb -d -salt -in file.encrypted -out file.txt -pass pass:my_password # ^^^^^^^^^^^ User-selected password. Piping openssl to/from tar makes it possible to encrypt an entire directory tree. # To encrypt a directory: sourcedir="/home/bozo/testfiles" encrfile="encr-dir.tar.gz" password=my_secret_password tar czvf - "$sourcedir" | openssl des3 -salt -out "$encrfile" -pass pass:"$password" # ^^^^ Uses des3 encryption. # Writes encrypted file "encr-dir.tar.gz" in current working directory. # To decrypt the resulting tarball: openssl des3 -d -salt -in "$encrfile" -pass pass:"$password" | tar -xzv # Decrypts and unpacks into current working directory. Of course, openssl has many other uses, such as obtaining signed certificates for Web sites. See the info page. shred Securely erase a file by overwriting it multiple times with random bit patterns before deleting it. This command has the same effect as Example 15-60, but does it in a more thorough and elegant manner. Chapter 15. External Filters, Programs and Commands 268
- 275. Advanced Bash-Scripting Guide This is one of the GNU fileutils. Advanced forensic technology may still be able to recover the contents of a file, even after application of shred. Miscellaneous mktemp Create a temporary file [71] with a "unique" filename. When invoked from the command-line without additional arguments, it creates a zero-length file in the /tmp directory. bash$ mktemp /tmp/tmp.zzsvql3154 PREFIX=filename tempfile=`mktemp $PREFIX.XXXXXX` # ^^^^^^ Need at least 6 placeholders #+ in the filename template. # If no filename template supplied, #+ "tmp.XXXXXXXXXX" is the default. echo "tempfile name = $tempfile" # tempfile name = filename.QA2ZpY # or something similar... # Creates a file of that name in the current working directory #+ with 600 file permissions. # A "umask 177" is therefore unnecessary, #+ but it's good programming practice anyhow. make Utility for building and compiling binary packages. This can also be used for any set of operations triggered by incremental changes in source files. The make command checks a Makefile, a list of file dependencies and operations to be carried out. The make utility is, in effect, a powerful scripting language similar in many ways to Bash, but with the capability of recognizing dependencies. For in-depth coverage of this useful tool set, see the GNU software documentation site. install Special purpose file copying command, similar to cp, but capable of setting permissions and attributes of the copied files. This command seems tailormade for installing software packages, and as such it shows up frequently in Makefiles (in the make install : section). It could likewise prove useful in installation scripts. dos2unix This utility, written by Benjamin Lin and collaborators, converts DOS-formatted text files (lines terminated by CR-LF) to UNIX format (lines terminated by LF only), and vice-versa. ptx The ptx [targetfile] command outputs a permuted index (cross-reference list) of the targetfile. This may be further filtered and formatted in a pipe, if necessary. more, less Pagers that display a text file or stream to stdout, one screenful at a time. These may be used to Chapter 15. External Filters, Programs and Commands 269
- 276. Advanced Bash-Scripting Guide filter the output of stdout . . . or of a script. An interesting application of more is to "test drive" a command sequence, to forestall potentially unpleasant consequences. ls /home/bozo | awk '{print "rm -rf " $1}' | more # ^^^^ # Testing the effect of the following (disastrous) command-line: # ls /home/bozo | awk '{print "rm -rf " $1}' | sh # Hand off to the shell to execute . . . ^^ The less pager has the interesting property of doing a formatted display of man page source. See Example A-39. 15.6. Communications Commands Certain of the following commands find use in network data transfer and analysis, as well as in chasing spammers. Information and Statistics host Searches for information about an Internet host by name or IP address, using DNS. bash$ host surfacemail.com surfacemail.com. has address 202.92.42.236 ipcalc Displays IP information for a host. With the -h option, ipcalc does a reverse DNS lookup, finding the name of the host (server) from the IP address. bash$ ipcalc -h 202.92.42.236 HOSTNAME=surfacemail.com nslookup Do an Internet "name server lookup" on a host by IP address. This is essentially equivalent to ipcalc -h or dig -x . The command may be run either interactively or noninteractively, i.e., from within a script. The nslookup command has allegedly been "deprecated," but it is still useful. bash$ nslookup -sil 66.97.104.180 nslookup kuhleersparnis.ch Server: 135.116.137.2 Address: 135.116.137.2#53 Non-authoritative answer: Name: kuhleersparnis.ch dig Domain Information Groper. Similar to nslookup, dig does an Internet name server lookup on a host. May be run from the command-line or from within a script. Chapter 15. External Filters, Programs and Commands 270
- 277. Advanced Bash-Scripting Guide Some interesting options to dig are +time=N for setting a query timeout to N seconds, +nofail for continuing to query servers until a reply is received, and -x for doing a reverse address lookup. Compare the output of dig -x with ipcalc -h and nslookup. bash$ dig -x 81.9.6.2 ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 11649 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;2.6.9.81.in-addr.arpa. IN PTR ;; AUTHORITY SECTION: 6.9.81.in-addr.arpa. 3600 IN SOA ns.eltel.net. noc.eltel.net. 2002031705 900 600 86400 3600 ;; Query time: 537 msec ;; SERVER: 135.116.137.2#53(135.116.137.2) ;; WHEN: Wed Jun 26 08:35:24 2002 ;; MSG SIZE rcvd: 91 Example 15-40. Finding out where to report a spammer #!/bin/bash # spam-lookup.sh: Look up abuse contact to report a spammer. # Thanks, Michael Zick. # Check for command-line arg. ARGCOUNT=1 E_WRONGARGS=65 if [ $# -ne "$ARGCOUNT" ] then echo "Usage: `basename $0` domain-name" exit $E_WRONGARGS fi dig +short $1.contacts.abuse.net -c in -t txt # Also try: # dig +nssearch $1 # Tries to find "authoritative name servers" and display SOA records. # The following also works: # whois -h whois.abuse.net $1 # ^^ ^^^^^^^^^^^^^^^ Specify host. # Can even lookup multiple spammers with this, i.e." # whois -h whois.abuse.net $spamdomain1 $spamdomain2 . . . # Exercise: # -------- # Expand the functionality of this script #+ so that it automatically e-mails a notification #+ to the responsible ISP's contact address(es). # Hint: use the "mail" command. exit $? Chapter 15. External Filters, Programs and Commands 271
- 278. Advanced Bash-Scripting Guide # spam-lookup.sh chinatietong.com # A known spam domain. # "crnet_mgr@chinatietong.com" # "crnet_tec@chinatietong.com" # "postmaster@chinatietong.com" # For a more elaborate version of this script, #+ see the SpamViz home page, http://www.spamviz.net/index.html. Example 15-41. Analyzing a spam domain #! /bin/bash # is-spammer.sh: Identifying spam domains # $Id: is-spammer, v 1.4 2004/09/01 19:37:52 mszick Exp $ # Above line is RCS ID info. # # This is a simplified version of the "is_spammer.bash #+ script in the Contributed Scripts appendix. # is-spammer <domain.name> # Uses an external program: 'dig' # Tested with version: 9.2.4rc5 # Uses functions. # Uses IFS to parse strings by assignment into arrays. # And even does something useful: checks e-mail blacklists. # Use the domain.name(s) from the text body: # http://www.good_stuff.spammer.biz/just_ignore_everything_else # ^^^^^^^^^^^ # Or the domain.name(s) from any e-mail address: # Really_Good_Offer@spammer.biz # # as the only argument to this script. #(PS: have your Inet connection running) # # So, to invoke this script in the above two instances: # is-spammer.sh spammer.biz # Whitespace == :Space:Tab:Line Feed:Carriage Return: WSP_IFS=$'x20'$'x09'$'x0A'$'x0D' # No Whitespace == Line Feed:Carriage Return No_WSP=$'x0A'$'x0D' # Field separator for dotted decimal ip addresses ADR_IFS=${No_WSP}'.' # Get the dns text resource record. # get_txt <error_code> <list_query> get_txt() { # Parse $1 by assignment at the dots. local -a dns Chapter 15. External Filters, Programs and Commands 272
- 279. Advanced Bash-Scripting Guide IFS=$ADR_IFS dns=( $1 ) IFS=$WSP_IFS if [ "${dns[0]}" == '127' ] then # See if there is a reason. echo $(dig +short $2 -t txt) fi } # Get the dns address resource record. # chk_adr <rev_dns> <list_server> chk_adr() { local reply local server local reason server=${1}${2} reply=$( dig +short ${server} ) # If reply might be an error code . . . if [ ${#reply} -gt 6 ] then reason=$(get_txt ${reply} ${server} ) reason=${reason:-${reply}} fi echo ${reason:-' not blacklisted.'} } # Need to get the IP address from the name. echo 'Get address of: '$1 ip_adr=$(dig +short $1) dns_reply=${ip_adr:-' no answer '} echo ' Found address: '${dns_reply} # A valid reply is at least 4 digits plus 3 dots. if [ ${#ip_adr} -gt 6 ] then echo declare query # Parse by assignment at the dots. declare -a dns IFS=$ADR_IFS dns=( ${ip_adr} ) IFS=$WSP_IFS # Reorder octets into dns query order. rev_dns="${dns[3]}"'.'"${dns[2]}"'.'"${dns[1]}"'.'"${dns[0]}"'.' # See: http://www.spamhaus.org (Conservative, well maintained) echo -n 'spamhaus.org says: ' echo $(chk_adr ${rev_dns} 'sbl-xbl.spamhaus.org') # See: http://ordb.org (Open mail relays) echo -n ' ordb.org says: ' echo $(chk_adr ${rev_dns} 'relays.ordb.org') # See: http://www.spamcop.net/ (You can report spammers here) echo -n ' spamcop.net says: ' echo $(chk_adr ${rev_dns} 'bl.spamcop.net') Chapter 15. External Filters, Programs and Commands 273
- 280. Advanced Bash-Scripting Guide # # # other blacklist operations # # # # See: http://cbl.abuseat.org. echo -n ' abuseat.org says: ' echo $(chk_adr ${rev_dns} 'cbl.abuseat.org') # See: http://dsbl.org/usage (Various mail relays) echo echo 'Distributed Server Listings' echo -n ' list.dsbl.org says: ' echo $(chk_adr ${rev_dns} 'list.dsbl.org') echo -n ' multihop.dsbl.org says: ' echo $(chk_adr ${rev_dns} 'multihop.dsbl.org') echo -n 'unconfirmed.dsbl.org says: ' echo $(chk_adr ${rev_dns} 'unconfirmed.dsbl.org') else echo echo 'Could not use that address.' fi exit 0 # Exercises: # -------- # 1) Check arguments to script, # and exit with appropriate error message if necessary. # 2) Check if on-line at invocation of script, # and exit with appropriate error message if necessary. # 3) Substitute generic variables for "hard-coded" BHL domains. # 4) Set a time-out for the script using the "+time=" option to the 'dig' command. For a much more elaborate version of the above script, see Example A-28. traceroute Trace the route taken by packets sent to a remote host. This command works within a LAN, WAN, or over the Internet. The remote host may be specified by an IP address. The output of this command may be filtered by grep or sed in a pipe. bash$ traceroute 81.9.6.2 traceroute to 81.9.6.2 (81.9.6.2), 30 hops max, 38 byte packets 1 tc43.xjbnnbrb.com (136.30.178.8) 191.303 ms 179.400 ms 179.767 ms 2 or0.xjbnnbrb.com (136.30.178.1) 179.536 ms 179.534 ms 169.685 ms 3 192.168.11.101 (192.168.11.101) 189.471 ms 189.556 ms * ... ping Broadcast an ICMP ECHO_REQUEST packet to another machine, either on a local or remote network. This is a diagnostic tool for testing network connections, and it should be used with caution. bash$ ping localhost PING localhost.localdomain (127.0.0.1) from 127.0.0.1 : 56(84) bytes of data. 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=0 ttl=255 time=709 usec 64 bytes from localhost.localdomain (127.0.0.1): icmp_seq=1 ttl=255 time=286 usec Chapter 15. External Filters, Programs and Commands 274
- 281. Advanced Bash-Scripting Guide --- localhost.localdomain ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max/mdev = 0.286/0.497/0.709/0.212 ms A successful ping returns an exit status of 0. This can be tested for in a script. HNAME=nastyspammer.com # HNAME=$HOST # Debug: test for localhost. count=2 # Send only two pings. if [[ `ping -c $count "$HNAME"` ]] then echo ""$HNAME" still up and broadcasting spam your way." else echo ""$HNAME" seems to be down. Pity." fi whois Perform a DNS (Domain Name System) lookup. The -h option permits specifying which particular whois server to query. See Example 4-6 and Example 15-40. finger Retrieve information about users on a network. Optionally, this command can display a user's ~/.plan, ~/.project, and ~/.forward files, if present. bash$ finger Login Name Tty Idle Login Time Office Office Phone bozo Bozo Bozeman tty1 8 Jun 25 16:59 (:0) bozo Bozo Bozeman ttyp0 Jun 25 16:59 (:0.0) bozo Bozo Bozeman ttyp1 Jun 25 17:07 (:0.0) bash$ finger bozo Login: bozo Name: Bozo Bozeman Directory: /home/bozo Shell: /bin/bash Office: 2355 Clown St., 543-1234 On since Fri Aug 31 20:13 (MST) on tty1 1 hour 38 minutes idle On since Fri Aug 31 20:13 (MST) on pts/0 12 seconds idle On since Fri Aug 31 20:13 (MST) on pts/1 On since Fri Aug 31 20:31 (MST) on pts/2 1 hour 16 minutes idle Mail last read Tue Jul 3 10:08 2007 (MST) No Plan. Out of security considerations, many networks disable finger and its associated daemon. [72] chfn Change information disclosed by the finger command. vrfy Verify an Internet e-mail address. This command seems to be missing from newer Linux distros. Remote Host Access sx, rx The sx and rx command set serves to transfer files to and from a remote host using the xmodem protocol. These are generally part of a communications package, such as minicom. Chapter 15. External Filters, Programs and Commands 275
- 282. Advanced Bash-Scripting Guide sz, rz The sz and rz command set serves to transfer files to and from a remote host using the zmodem protocol. Zmodem has certain advantages over xmodem, such as faster transmission rate and resumption of interrupted file transfers. Like sx and rx, these are generally part of a communications package. ftp Utility and protocol for uploading / downloading files to or from a remote host. An ftp session can be automated in a script (see Example 18-6 and Example A-4). uucp, uux, cu uucp: UNIX to UNIX copy. This is a communications package for transferring files between UNIX servers. A shell script is an effective way to handle a uucp command sequence. Since the advent of the Internet and e-mail, uucp seems to have faded into obscurity, but it still exists and remains perfectly workable in situations where an Internet connection is not available or appropriate. The advantage of uucp is that it is fault-tolerant, so even if there is a service interruption the copy operation will resume where it left off when the connection is restored. --- uux: UNIX to UNIX execute. Execute a command on a remote system. This command is part of the uucp package. --- cu: Call Up a remote system and connect as a simple terminal. It is a sort of dumbed-down version of telnet. This command is part of the uucp package. telnet Utility and protocol for connecting to a remote host. The telnet protocol contains security holes and should therefore probably be avoided. Its use within a shell script is not recommended. wget The wget utility noninteractively retrieves or downloads files from a Web or ftp site. It works well in a script. wget -p http://www.xyz23.com/file01.html # The -p or --page-requisite option causes wget to fetch all files #+ required to display the specified page. wget -r ftp://ftp.xyz24.net/~bozo/project_files/ -O $SAVEFILE # The -r option recursively follows and retrieves all links #+ on the specified site. wget -c ftp://ftp.xyz25.net/bozofiles/filename.tar.bz2 # The -c option lets wget resume an interrupted download. # This works with ftp servers and many HTTP sites. Example 15-42. Getting a stock quote #!/bin/bash # quote-fetch.sh: Download a stock quote. Chapter 15. External Filters, Programs and Commands 276
- 283. Advanced Bash-Scripting Guide E_NOPARAMS=86 if [ -z "$1" ] # Must specify a stock (symbol) to fetch. then echo "Usage: `basename $0` stock-symbol" exit $E_NOPARAMS fi stock_symbol=$1 file_suffix=.html # Fetches an HTML file, so name it appropriately. URL='http://finance.yahoo.com/q?s=' # Yahoo finance board, with stock query suffix. # ----------------------------------------------------------- wget -O ${stock_symbol}${file_suffix} "${URL}${stock_symbol}" # ----------------------------------------------------------- # To look up stuff on http://search.yahoo.com: # ----------------------------------------------------------- # URL="http://search.yahoo.com/search?fr=ush-news&p=${query}" # wget -O "$savefilename" "${URL}" # ----------------------------------------------------------- # Saves a list of relevant URLs. exit $? # Exercises: # --------- # # 1) Add a test to ensure the user running the script is on-line. # (Hint: parse the output of 'ps -ax' for "ppp" or "connect." # # 2) Modify this script to fetch the local weather report, #+ taking the user's zip code as an argument. See also Example A-30 and Example A-31. lynx The lynx Web and file browser can be used inside a script (with the -dump option) to retrieve a file from a Web or ftp site noninteractively. lynx -dump http://www.xyz23.com/file01.html >$SAVEFILE With the -traversal option, lynx starts at the HTTP URL specified as an argument, then "crawls" through all links located on that particular server. Used together with the -crawl option, outputs page text to a log file. rlogin Remote login, initates a session on a remote host. This command has security issues, so use ssh instead. rsh Remote shell, executes command(s) on a remote host. This has security issues, so use ssh instead. rcp Remote copy, copies files between two different networked machines. rsync Remote synchronize, updates (synchronizes) files between two different networked machines. bash$ rsync -a ~/sourcedir/*txt /node1/subdirectory/ Chapter 15. External Filters, Programs and Commands 277
- 284. Advanced Bash-Scripting Guide Example 15-43. Updating FC4 #!/bin/bash # fc4upd.sh # Script author: Frank Wang. # Slight stylistic modifications by ABS Guide author. # Used in ABS Guide with permission. # Download Fedora Core 4 update from mirror site using rsync. # Should also work for newer Fedora Cores -- 5, 6, . . . # Only download latest package if multiple versions exist, #+ to save space. URL=rsync://distro.ibiblio.org/fedora-linux-core/updates/ # URL=rsync://ftp.kddilabs.jp/fedora/core/updates/ # URL=rsync://rsync.planetmirror.com/fedora-linux-core/updates/ DEST=${1:-/var/www/html/fedora/updates/} LOG=/tmp/repo-update-$(/bin/date +%Y-%m-%d).txt PID_FILE=/var/run/${0##*/}.pid E_RETURN=85 # Something unexpected happened. # General rsync options # -r: recursive download # -t: reserve time # -v: verbose OPTS="-rtv --delete-excluded --delete-after --partial" # rsync include pattern # Leading slash causes absolute path name match. INCLUDE=( "/4/i386/kde-i18n-Chinese*" # ^ ^ # Quoting is necessary to prevent globbing. ) # rsync exclude pattern # Temporarily comment out unwanted pkgs using "#" . . . EXCLUDE=( /1 /2 /3 /testing /4/SRPMS /4/ppc /4/x86_64 /4/i386/debug "/4/i386/kde-i18n-*" "/4/i386/openoffice.org-langpack-*" "/4/i386/*i586.rpm" "/4/i386/GFS-*" "/4/i386/cman-*" "/4/i386/dlm-*" Chapter 15. External Filters, Programs and Commands 278
- 285. Advanced Bash-Scripting Guide "/4/i386/gnbd-*" "/4/i386/kernel-smp*" # "/4/i386/kernel-xen*" # "/4/i386/xen-*" ) init () { # Let pipe command return possible rsync error, e.g., stalled network. set -o pipefail # Newly introduced in Bash, version 3. TMP=${TMPDIR:-/tmp}/${0##*/}.$$ # Store refined download list. trap "{ rm -f $TMP 2>/dev/null }" EXIT # Clear temporary file on exit. } check_pid () { # Check if process exists. if [ -s "$PID_FILE" ]; then echo "PID file exists. Checking ..." PID=$(/bin/egrep -o "^[[:digit:]]+" $PID_FILE) if /bin/ps --pid $PID &>/dev/null; then echo "Process $PID found. ${0##*/} seems to be running!" /usr/bin/logger -t ${0##*/} "Process $PID found. ${0##*/} seems to be running!" exit $E_RETURN fi echo "Process $PID not found. Start new process . . ." fi } # Set overall file update range starting from root or $URL, #+ according to above patterns. set_range () { include= exclude= for p in "${INCLUDE[@]}"; do include="$include --include "$p"" done for p in "${EXCLUDE[@]}"; do exclude="$exclude --exclude "$p"" done } # Retrieve and refine rsync update list. get_list () { echo $$ > $PID_FILE || { echo "Can't write to pid file $PID_FILE" exit $E_RETURN } echo -n "Retrieving and refining update list . . ." # Retrieve list -- 'eval' is needed to run rsync as a single command. # $3 and $4 is the date and time of file creation. # $5 is the full package name. previous= Chapter 15. External Filters, Programs and Commands 279
- 286. Advanced Bash-Scripting Guide pre_file= pre_date=0 eval /bin/nice /usr/bin/rsync -r $include $exclude $URL | egrep '^dr.x|^-r' | awk '{print $3, $4, $5}' | sort -k3 | { while read line; do # Get seconds since epoch, to filter out obsolete pkgs. cur_date=$(date -d "$(echo $line | awk '{print $1, $2}')" +%s) # echo $cur_date # Get file name. cur_file=$(echo $line | awk '{print $3}') # echo $cur_file # Get rpm pkg name from file name, if possible. if [[ $cur_file == *rpm ]]; then pkg_name=$(echo $cur_file | sed -r -e 's/(^([^_-]+[_-])+)[[:digit:]]+..*[_-].*$/1/') else pkg_name= fi # echo $pkg_name if [ -z "$pkg_name" ]; then # If not a rpm file, echo $cur_file >> $TMP #+ then append to download list. elif [ "$pkg_name" != "$previous" ]; then # A new pkg found. echo $pre_file >> $TMP # Output latest file. previous=$pkg_name # Save current. pre_date=$cur_date pre_file=$cur_file elif [ "$cur_date" -gt "$pre_date" ]; then # If same pkg, but newer, pre_date=$cur_date #+ then update latest pointer. pre_file=$cur_file fi done echo $pre_file >> $TMP # TMP contains ALL #+ of refined list now. # echo "subshell=$BASH_SUBSHELL" } # Bracket required here to let final "echo $pre_file >> $TMP" # Remained in the same subshell ( 1 ) with the entire loop. RET=$? # Get return code of the pipe command. [ "$RET" -ne 0 ] && { echo "List retrieving failed with code $RET" exit $E_RETURN } echo "done"; echo } # Real rsync download part. get_file () { echo "Downloading..." /bin/nice /usr/bin/rsync $OPTS --filter "merge,+/ $TMP" Chapter 15. External Filters, Programs and Commands 280
- 287. Advanced Bash-Scripting Guide --exclude '*' $URL $DEST | /usr/bin/tee $LOG RET=$? # --filter merge,+/ is crucial for the intention. # + modifier means include and / means absolute path. # Then sorted list in $TMP will contain ascending dir name and #+ prevent the following --exclude '*' from "shortcutting the circuit." echo "Done" rm -f $PID_FILE 2>/dev/null return $RET } # ------- # Main init check_pid set_range get_list get_file RET=$? # ------- if [ "$RET" -eq 0 ]; then /usr/bin/logger -t ${0##*/} "Fedora update mirrored successfully." else /usr/bin/logger -t ${0##*/} "Fedora update mirrored with failure code: $RET" fi exit $RET See also Example A-32. Using rcp, rsync, and similar utilities with security implications in a shell script may not be advisable. Consider, instead, using ssh, scp, or an expect script. ssh Secure shell, logs onto a remote host and executes commands there. This secure replacement for telnet, rlogin, rcp, and rsh uses identity authentication and encryption. See its manpage for details. Example 15-44. Using ssh #!/bin/bash # remote.bash: Using ssh. # This example by Michael Zick. # Used with permission. # Presumptions: # ------------ # fd-2 isn't being captured ( '2>/dev/null' ). # ssh/sshd presumes stderr ('2') will display to user. # Chapter 15. External Filters, Programs and Commands 281
- 288. Advanced Bash-Scripting Guide # sshd is running on your machine. # For any 'standard' distribution, it probably is, #+ and without any funky ssh-keygen having been done. # Try ssh to your machine from the command-line: # # $ ssh $HOSTNAME # Without extra set-up you'll be asked for your password. # enter password # when done, $ exit # # Did that work? If so, you're ready for more fun. # Try ssh to your machine as 'root': # # $ ssh -l root $HOSTNAME # When asked for password, enter root's, not yours. # Last login: Tue Aug 10 20:25:49 2004 from localhost.localdomain # Enter 'exit' when done. # The above gives you an interactive shell. # It is possible for sshd to be set up in a 'single command' mode, #+ but that is beyond the scope of this example. # The only thing to note is that the following will work in #+ 'single command' mode. # A basic, write stdout (local) command. ls -l # Now the same basic command on a remote machine. # Pass a different 'USERNAME' 'HOSTNAME' if desired: USER=${USERNAME:-$(whoami)} HOST=${HOSTNAME:-$(hostname)} # Now excute the above command-line on the remote host, #+ with all transmissions encrypted. ssh -l ${USER} ${HOST} " ls -l " # The expected result is a listing of your username's home #+ directory on the remote machine. # To see any difference, run this script from somewhere #+ other than your home directory. # In other words, the Bash command is passed as a quoted line #+ to the remote shell, which executes it on the remote machine. # In this case, sshd does ' bash -c "ls -l" ' on your behalf. # For information on topics such as not having to enter a #+ password/passphrase for every command-line, see #+ man ssh #+ man ssh-keygen #+ man sshd_config. exit 0 Within a loop, ssh may cause unexpected behavior. According to a Usenet post in the comp.unix shell archives, ssh inherits the loop's stdin. To remedy this, pass ssh either the -n or -f option. Chapter 15. External Filters, Programs and Commands 282
- 289. Advanced Bash-Scripting Guide Thanks, Jason Bechtel, for pointing this out. scp Secure copy, similar in function to rcp, copies files between two different networked machines, but does so using authentication, and with a security level similar to ssh. Local Network write This is a utility for terminal-to-terminal communication. It allows sending lines from your terminal (console or xterm) to that of another user. The mesg command may, of course, be used to disable write access to a terminal Since write is interactive, it would not normally find use in a script. netconfig A command-line utility for configuring a network adapter (using DHCP). This command is native to Red Hat centric Linux distros. Mail mail Send or read e-mail messages. This stripped-down command-line mail client works fine as a command embedded in a script. Example 15-45. A script that mails itself #!/bin/sh # self-mailer.sh: Self-mailing script adr=${1:-`whoami`} # Default to current user, if not specified. # Typing 'self-mailer.sh wiseguy@superdupergenius.com' #+ sends this script to that addressee. # Just 'self-mailer.sh' (no argument) sends the script #+ to the person invoking it, for example, bozo@localhost.localdomain. # # For more on the ${parameter:-default} construct, #+ see the "Parameter Substitution" section #+ of the "Variables Revisited" chapter. # ============================================================================ cat $0 | mail -s "Script "`basename $0`" has mailed itself to you." "$adr" # ============================================================================ # -------------------------------------------- # Greetings from the self-mailing script. # A mischievous person has run this script, #+ which has caused it to mail itself to you. # Apparently, some people have nothing better #+ to do with their time. # -------------------------------------------- echo "At `date`, script "`basename $0`" mailed to "$adr"." exit 0 Chapter 15. External Filters, Programs and Commands 283
- 290. Advanced Bash-Scripting Guide # Note that the "mailx" command (in "send" mode) may be substituted #+ for "mail" ... but with somewhat different options. mailto Similar to the mail command, mailto sends e-mail messages from the command-line or in a script. However, mailto also permits sending MIME (multimedia) messages. mailstats Show mail statistics. This command may be invoked only by root. root# mailstats Statistics from Tue Jan 1 20:32:08 2008 M msgsfr bytes_from msgsto bytes_to msgsrej msgsdis msgsqur Mailer 4 1682 24118K 0 0K 0 0 0 esmtp 9 212 640K 1894 25131K 0 0 0 local ===================================================================== T 1894 24758K 1894 25131K 0 0 0 C 414 0 vacation This utility automatically replies to e-mails that the intended recipient is on vacation and temporarily unavailable. It runs on a network, in conjunction with sendmail, and is not applicable to a dial-up POPmail account. 15.7. Terminal Control Commands Command affecting the console or terminal tput Initialize terminal and/or fetch information about it from terminfo data. Various options permit certain terminal operations: tput clear is the equivalent of clear; tput reset is the equivalent of reset. bash$ tput longname xterm terminal emulator (X Window System) Issuing a tput cup X Y moves the cursor to the (X,Y) coordinates in the current terminal. A clear to erase the terminal screen would normally precede this. Some interesting options to tput are: ◊ bold, for high-intensity text ◊ smul, to underline text in the terminal ◊ smso, to render text in reverse ◊ sgr0, to reset the terminal parameters (to normal), without clearing the screen Example scripts using tput: 1. Example 33-13 2. Example 33-11 3. Example A-44 4. Example A-42 5. Example 26-2 Note that stty offers a more powerful command set for controlling a terminal. infocmp Chapter 15. External Filters, Programs and Commands 284
- 291. Advanced Bash-Scripting Guide This command prints out extensive information about the current terminal. It references the terminfo database. bash$ infocmp # Reconstructed via infocmp from file: /usr/share/terminfo/r/rxvt rxvt|rxvt terminal emulator (X Window System), am, bce, eo, km, mir, msgr, xenl, xon, colors#8, cols#80, it#8, lines#24, pairs#64, acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G, blink=E[5m, bold=E[1m, civis=E[?25l, clear=E[HE[2J, cnorm=E[?25h, cr=^M, ... reset Reset terminal parameters and clear text screen. As with clear, the cursor and prompt reappear in the upper lefthand corner of the terminal. clear The clear command simply clears the text screen at the console or in an xterm. The prompt and cursor reappear at the upper lefthand corner of the screen or xterm window. This command may be used either at the command line or in a script. See Example 10-25. resize Echoes commands necessary to set $TERM and $TERMCAP to duplicate the size (dimensions) of the current terminal. bash$ resize set noglob; setenv COLUMNS '80'; setenv LINES '24'; unset noglob; script This utility records (saves to a file) all the user keystrokes at the command-line in a console or an xterm window. This, in effect, creates a record of a session. 15.8. Math Commands "Doing the numbers" factor Decompose an integer into prime factors. bash$ factor 27417 27417: 3 13 19 37 Example 15-46. Generating prime numbers #!/bin/bash # primes2.sh # Generating prime numbers the quick-and-easy way, #+ without resorting to fancy algorithms. Chapter 15. External Filters, Programs and Commands 285
- 292. Advanced Bash-Scripting Guide CEILING=10000 # 1 to 10000 PRIME=0 E_NOTPRIME= is_prime () { local factors factors=( $(factor $1) ) # Load output of `factor` into array. if [ -z "${factors[2]}" ] # Third element of "factors" array: #+ ${factors[2]} is 2nd factor of argument. # If it is blank, then there is no 2nd factor, #+ and the argument is therefore prime. then return $PRIME # 0 else return $E_NOTPRIME # null fi } echo for n in $(seq $CEILING) do if is_prime $n then printf %5d $n fi # ^ Five positions per number suffices. done # For a higher $CEILING, adjust upward, as necessary. echo exit bc Bash can't handle floating point calculations, and it lacks operators for certain important mathematical functions. Fortunately, bc comes to the rescue. Not just a versatile, arbitrary precision calculation utility, bc offers many of the facilities of a programming language. bc has a syntax vaguely resembling C. Since it is a fairly well-behaved UNIX utility, and may therefore be used in a pipe, bc comes in handy in scripts. Here is a simple template for using bc to calculate a script variable. This uses command substitution. variable=$(echo "OPTIONS; OPERATIONS" | bc) Example 15-47. Monthly Payment on a Mortgage #!/bin/bash # monthlypmt.sh: Calculates monthly payment on a mortgage. Chapter 15. External Filters, Programs and Commands 286
- 293. Advanced Bash-Scripting Guide # This is a modification of code in the #+ "mcalc" (mortgage calculator) package, #+ by Jeff Schmidt #+ and #+ Mendel Cooper (yours truly, the author of the ABS Guide). # http://www.ibiblio.org/pub/Linux/apps/financial/mcalc-1.6.tar.gz [15k] echo echo "Given the principal, interest rate, and term of a mortgage," echo "calculate the monthly payment." bottom=1.0 echo echo -n "Enter principal (no commas) " read principal echo -n "Enter interest rate (percent) " # If 12%, enter "12", not ".12". read interest_r echo -n "Enter term (months) " read term interest_r=$(echo "scale=9; $interest_r/100.0" | bc) # Convert to decimal. # ^^^^^^^^^^^^^^^^^ Divide by 100. # "scale" determines how many decimal places. interest_rate=$(echo "scale=9; $interest_r/12 + 1.0" | bc) top=$(echo "scale=9; $principal*$interest_rate^$term" | bc) # ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ # Standard formula for figuring interest. echo; echo "Please be patient. This may take a while." let "months = $term - 1" # ==================================================================== for ((x=$months; x > 0; x--)) do bot=$(echo "scale=9; $interest_rate^$x" | bc) bottom=$(echo "scale=9; $bottom+$bot" | bc) # bottom = $(($bottom + $bot")) done # ==================================================================== # -------------------------------------------------------------------- # Rick Boivie pointed out a more efficient implementation #+ of the above loop, which decreases computation time by 2/3. # for ((x=1; x <= $months; x++)) # do # bottom=$(echo "scale=9; $bottom * $interest_rate + 1" | bc) # done # And then he came up with an even more efficient alternative, #+ one that cuts down the run time by about 95%! # bottom=`{ # echo "scale=9; bottom=$bottom; interest_rate=$interest_rate" Chapter 15. External Filters, Programs and Commands 287
- 294. Advanced Bash-Scripting Guide # for ((x=1; x <= $months; x++)) # do # echo 'bottom = bottom * interest_rate + 1' # done # echo 'bottom' # } | bc` # Embeds a 'for loop' within command substitution. # -------------------------------------------------------------------------- # On the other hand, Frank Wang suggests: # bottom=$(echo "scale=9; ($interest_rate^$term-1)/($interest_rate-1)" | bc) # Because . . . # The algorithm behind the loop #+ is actually a sum of geometric proportion series. # The sum formula is e0(1-q^n)/(1-q), #+ where e0 is the first element and q=e(n+1)/e(n) #+ and n is the number of elements. # -------------------------------------------------------------------------- # let "payment = $top/$bottom" payment=$(echo "scale=2; $top/$bottom" | bc) # Use two decimal places for dollars and cents. echo echo "monthly payment = $$payment" # Echo a dollar sign in front of amount. echo exit 0 # Exercises: # 1) Filter input to permit commas in principal amount. # 2) Filter input to permit interest to be entered as percent or decimal. # 3) If you are really ambitious, #+ expand this script to print complete amortization tables. Example 15-48. Base Conversion #!/bin/bash ########################################################################### # Shellscript: base.sh - print number to different bases (Bourne Shell) # Author : Heiner Steven (heiner.steven@odn.de) # Date : 07-03-95 # Category : Desktop # $Id: base.sh,v 1.2 2000/02/06 19:55:35 heiner Exp $ # ==> Above line is RCS ID info. ########################################################################### # Description # # Changes # 21-03-95 stv fixed error occuring with 0xb as input (0.2) ########################################################################### # ==> Used in ABS Guide with the script author's permission. # ==> Comments added by ABS Guide author. NOARGS=85 PN=`basename "$0"` # Program name VER=`echo '$Revision: 1.2 $' | cut -d' ' -f2` # ==> VER=1.2 Chapter 15. External Filters, Programs and Commands 288
- 295. Advanced Bash-Scripting Guide Usage () { echo "$PN - print number to different bases, $VER (stv '95) usage: $PN [number ...] If no number is given, the numbers are read from standard input. A number may be binary (base 2) starting with 0b (i.e. 0b1100) octal (base 8) starting with 0 (i.e. 014) hexadecimal (base 16) starting with 0x (i.e. 0xc) decimal otherwise (i.e. 12)" >&2 exit $NOARGS } # ==> Prints usage message. Msg () { for i # ==> in [list] missing. Why? do echo "$PN: $i" >&2 done } Fatal () { Msg "$@"; exit 66; } PrintBases () { # Determine base of the number for i # ==> in [list] missing... do # ==> so operates on command-line arg(s). case "$i" in 0b*) ibase=2;; # binary 0x*|[a-f]*|[A-F]*) ibase=16;; # hexadecimal 0*) ibase=8;; # octal [1-9]*) ibase=10;; # decimal *) Msg "illegal number $i - ignored" continue;; esac # Remove prefix, convert hex digits to uppercase (bc needs this). number=`echo "$i" | sed -e 's:^0[bBxX]::' | tr '[a-f]' '[A-F]'` # ==> Uses ":" as sed separator, rather than "/". # Convert number to decimal dec=`echo "ibase=$ibase; $number" | bc` # ==> 'bc' is calculator utility. case "$dec" in [0-9]*) ;; # number ok *) continue;; # error: ignore esac # Print all conversions in one line. # ==> 'here document' feeds command list to 'bc'. echo `bc <<! obase=16; "hex="; $dec obase=10; "dec="; $dec obase=8; "oct="; $dec obase=2; "bin="; $dec ! ` | sed -e 's: : :g' done } while [ $# -gt 0 ] # ==> Is a "while loop" really necessary here, Chapter 15. External Filters, Programs and Commands 289
- 296. Advanced Bash-Scripting Guide # ==>+ since all the cases either break out of the loop # ==>+ or terminate the script. # ==> (Above comment by Paulo Marcel Coelho Aragao.) do case "$1" in --) shift; break;; -h) Usage;; # ==> Help message. -*) Usage;; *) break;; # First number esac # ==> Error checking for illegal input might be appropriate. shift done if [ $# -gt 0 ] then PrintBases "$@" else # Read from stdin. while read line do PrintBases $line done fi exit An alternate method of invoking bc involves using a here document embedded within a command substitution block. This is especially appropriate when a script needs to pass a list of options and commands to bc. variable=`bc << LIMIT_STRING options statements operations LIMIT_STRING ` ...or... variable=$(bc << LIMIT_STRING options statements operations LIMIT_STRING ) Example 15-49. Invoking bc using a here document #!/bin/bash # Invoking 'bc' using command substitution # in combination with a 'here document'. var1=`bc << EOF 18.33 * 19.78 EOF ` echo $var1 # 362.56 Chapter 15. External Filters, Programs and Commands 290
- 297. Advanced Bash-Scripting Guide # $( ... ) notation also works. v1=23.53 v2=17.881 v3=83.501 v4=171.63 var2=$(bc << EOF scale = 4 a = ( $v1 + $v2 ) b = ( $v3 * $v4 ) a * b + 15.35 EOF ) echo $var2 # 593487.8452 var3=$(bc -l << EOF scale = 9 s ( 1.7 ) EOF ) # Returns the sine of 1.7 radians. # The "-l" option calls the 'bc' math library. echo $var3 # .991664810 # Now, try it in a function... hypotenuse () # Calculate hypotenuse of a right triangle. { # c = sqrt( a^2 + b^2 ) hyp=$(bc -l << EOF scale = 9 sqrt ( $1 * $1 + $2 * $2 ) EOF ) # Can't directly return floating point values from a Bash function. # But, can echo-and-capture: echo "$hyp" } hyp=$(hypotenuse 3.68 7.31) echo "hypotenuse = $hyp" # 8.184039344 exit 0 Example 15-50. Calculating PI #!/bin/bash # cannon.sh: Approximating PI by firing cannonballs. # Author: Mendel Cooper # License: Public Domain # Version 2.2, reldate 13oct08. # This is a very simple instance of a "Monte Carlo" simulation: #+ a mathematical model of a real-life event, #+ using pseudorandom numbers to emulate random chance. # Consider a perfectly square plot of land, 10000 units on a side. Chapter 15. External Filters, Programs and Commands 291
- 298. Advanced Bash-Scripting Guide # This land has a perfectly circular lake in its center, #+ with a diameter of 10000 units. # The plot is actually mostly water, except for land in the four corners. # (Think of it as a square with an inscribed circle.) # # We will fire iron cannonballs from an old-style cannon #+ at the square. # All the shots impact somewhere on the square, #+ either in the lake or on the dry corners. # Since the lake takes up most of the area, #+ most of the shots will SPLASH! into the water. # Just a few shots will THUD! into solid ground #+ in the four corners of the square. # # If we take enough random, unaimed shots at the square, #+ Then the ratio of SPLASHES to total shots will approximate #+ the value of PI/4. # # The reason for this is that the cannon is actually shooting #+ only at the upper right-hand quadrant of the square, #+ i.e., Quadrant I of the Cartesian coordinate plane. # (The previous explanation was a simplification.) # # Theoretically, the more shots taken, the better the fit. # However, a shell script, as opposed to a compiled language #+ with floating-point math built in, requires a few compromises. # This tends to lower the accuracy of the simulation. DIMENSION=10000 # Length of each side of the plot. # Also sets ceiling for random integers generated. MAXSHOTS=1000 # Fire this many shots. # 10000 or more would be better, but would take too long. PMULTIPLIER=4.0 # Scaling factor to approximate PI. declare -r M_PI=3.141592654 # Actual 9-place value of PI, for comparison purposes. get_random () { SEED=$(head -n 1 /dev/urandom | od -N 1 | awk '{ print $2 }') RANDOM=$SEED # From "seeding-random.sh" #+ example script. let "rnum = $RANDOM % $DIMENSION" # Range less than 10000. echo $rnum } distance= # Declare global variable. hypotenuse () # Calculate hypotenuse of a right triangle. { # From "alt-bc.sh" example. distance=$(bc -l << EOF scale = 0 sqrt ( $1 * $1 + $2 * $2 ) EOF ) # Setting "scale" to zero rounds down result to integer value, #+ a necessary compromise in this script. # This decreases the accuracy of the simulation. } Chapter 15. External Filters, Programs and Commands 292
- 299. Advanced Bash-Scripting Guide # ========================================================== # main() { # "Main" code block, mimmicking a C-language main() function. # Initialize variables. shots=0 splashes=0 thuds=0 Pi=0 error=0 while [ "$shots" -lt "$MAXSHOTS" ] # Main loop. do xCoord=$(get_random) # Get random X and Y coords. yCoord=$(get_random) hypotenuse $xCoord $yCoord # Hypotenuse of #+ right-triangle = distance. ((shots++)) printf "#%4d " $shots printf "Xc = %4d " $xCoord printf "Yc = %4d " $yCoord printf "Distance = %5d " $distance # Distance from #+ center of lake #+ -- the "origin" -- #+ coordinate (0,0). if [ "$distance" -le "$DIMENSION" ] then echo -n "SPLASH! " ((splashes++)) else echo -n "THUD! " ((thuds++)) fi Pi=$(echo "scale=9; $PMULTIPLIER*$splashes/$shots" | bc) # Multiply ratio by 4.0. echo -n "PI ~ $Pi" echo done echo echo "After $shots shots, PI looks like approximately $Pi" # Tends to run a bit high, #+ probably due to round-off error and imperfect randomness of $RANDOM. # But still usually within plus-or-minus 5% . . . #+ a pretty good rough approximation. error=$(echo "scale=9; $Pi - $M_PI" | bc) pct_error=$(echo "scale=2; 100.0 * $error / $M_PI" | bc) echo -n "Deviation from mathematical value of PI = $error" echo " ($pct_error% error)" echo # End of "main" code block. # } # ========================================================== exit Chapter 15. External Filters, Programs and Commands 293
- 300. Advanced Bash-Scripting Guide # One might well wonder whether a shell script is appropriate for #+ an application as complex and computation-intensive as a simulation. # # There are at least two justifications. # 1) As a proof of concept: to show it can be done. # 2) To prototype and test the algorithms before rewriting #+ it in a compiled high-level language. See also Example A-37. dc The dc (desk calculator) utility is stack-oriented and uses RPN ("Reverse Polish Notation"). Like bc, it has much of the power of a programming language. echo "7 8 * p" | dc # 56 # Pushes 7, then 8 onto the stack, #+ multiplies ("*" operator), then prints the result ("p" operator). Most persons avoid dc, because of its non-intuitive input and rather cryptic operators. Yet, it has its uses. Example 15-51. Converting a decimal number to hexadecimal #!/bin/bash # hexconvert.sh: Convert a decimal number to hexadecimal. E_NOARGS=85 # Command-line arg missing. BASE=16 # Hexadecimal. if [ -z "$1" ] then # Need a command-line argument. echo "Usage: $0 number" exit $E_NOARGS fi # Exercise: add argument validity checking. hexcvt () { if [ -z "$1" ] then echo 0 return # "Return" 0 if no arg passed to function. fi echo ""$1" "$BASE" o p" | dc # o sets radix (numerical base) of output. # p prints the top of stack. # For other options: 'man dc' ... return } hexcvt "$1" exit Studying the info page for dc is a painful path to understanding its intricacies. There seems to be a small, select group of dc wizards who delight in showing off their mastery of this powerful, but arcane utility. bash$ echo "16i[q]sa[ln0=aln100%Pln100/snlbx]sbA0D68736142snlbxq" | dc Bash Chapter 15. External Filters, Programs and Commands 294
- 301. Advanced Bash-Scripting Guide dc <<< 10k5v1+2/p # 1.6180339887 # ^^^ Feed operations to dc using a Here String. # ^^^ Pushes 10 and sets that as the precision (10k). # ^^ Pushes 5 and takes its square root (5v, v = square root). # ^^ Pushes 1 and adds it to the running total (1+). # ^^ Pushes 2 and divides the running total by that (2/). # ^ Pops and prints the result (p) # The result is 1.6180339887 ... # ... which happens to be the Pythagorean Golden Ratio, to 10 places. Example 15-52. Factoring #!/bin/bash # factr.sh: Factor a number MIN=2 # Will not work for number smaller than this. E_NOARGS=85 E_TOOSMALL=86 if [ -z $1 ] then echo "Usage: $0 number" exit $E_NOARGS fi if [ "$1" -lt "$MIN" ] then echo "Number to factor must be $MIN or greater." exit $E_TOOSMALL fi # Exercise: Add type checking (to reject non-integer arg). echo "Factors of $1:" # ------------------------------------------------------- echo "$1[p]s2[lip/dli%0=1dvsr]s12sid2%0=13sidvsr[dli%0= 1lrli2+dsi!>.]ds.xd1<2" | dc # ------------------------------------------------------- # Above code written by Michel Charpentier <charpov@cs.unh.edu> # (as a one-liner, here broken into two lines for display purposes). # Used in ABS Guide with permission (thanks!). exit # $ sh factr.sh 270138 # 2 # 3 # 11 # 4093 awk Yet another way of doing floating point math in a script is using awk's built-in math functions in a shell wrapper. Example 15-53. Calculating the hypotenuse of a triangle Chapter 15. External Filters, Programs and Commands 295
- 302. Advanced Bash-Scripting Guide #!/bin/bash # hypotenuse.sh: Returns the "hypotenuse" of a right triangle. # (square root of sum of squares of the "legs") ARGS=2 # Script needs sides of triangle passed. E_BADARGS=85 # Wrong number of arguments. if [ $# -ne "$ARGS" ] # Test number of arguments to script. then echo "Usage: `basename $0` side_1 side_2" exit $E_BADARGS fi AWKSCRIPT=' { printf( "%3.7fn", sqrt($1*$1 + $2*$2) ) } ' # command(s) / parameters passed to awk # Now, pipe the parameters to awk. echo -n "Hypotenuse of $1 and $2 = " echo $1 $2 | awk "$AWKSCRIPT" # ^^^^^^^^^^^^ # An echo-and-pipe is an easy way of passing shell parameters to awk. exit # Exercise: Rewrite this script using 'bc' rather than awk. # Which method is more intuitive? 15.9. Miscellaneous Commands Command that fit in no special category jot, seq These utilities emit a sequence of integers, with a user-selectable increment. The default separator character between each integer is a newline, but this can be changed with the -s option. bash$ seq 5 1 2 3 4 5 bash$ seq -s : 5 1:2:3:4:5 Both jot and seq come in handy in a for loop. Example 15-54. Using seq to generate loop arguments #!/bin/bash Chapter 15. External Filters, Programs and Commands 296
- 303. Advanced Bash-Scripting Guide # Using "seq" echo for a in `seq 80` # or for a in $( seq 80 ) # Same as for a in 1 2 3 4 5 ... 80 (saves much typing!). # May also use 'jot' (if present on system). do echo -n "$a " done # 1 2 3 4 5 ... 80 # Example of using the output of a command to generate # the [list] in a "for" loop. echo; echo COUNT=80 # Yes, 'seq' also accepts a replaceable parameter. for a in `seq $COUNT` # or for a in $( seq $COUNT ) do echo -n "$a " done # 1 2 3 4 5 ... 80 echo; echo BEGIN=75 END=80 for a in `seq $BEGIN $END` # Giving "seq" two arguments starts the count at the first one, #+ and continues until it reaches the second. do echo -n "$a " done # 75 76 77 78 79 80 echo; echo BEGIN=45 INTERVAL=5 END=80 for a in `seq $BEGIN $INTERVAL $END` # Giving "seq" three arguments starts the count at the first one, #+ uses the second for a step interval, #+ and continues until it reaches the third. do echo -n "$a " done # 45 50 55 60 65 70 75 80 echo; echo exit 0 A simpler example: # Create a set of 10 files, #+ named file.1, file.2 . . . file.10. COUNT=10 PREFIX=file for filename in `seq $COUNT` do Chapter 15. External Filters, Programs and Commands 297
- 304. Advanced Bash-Scripting Guide touch $PREFIX.$filename # Or, can do other operations, #+ such as rm, grep, etc. done Example 15-55. Letter Count" #!/bin/bash # letter-count.sh: Counting letter occurrences in a text file. # Written by Stefano Palmeri. # Used in ABS Guide with permission. # Slightly modified by document author. MINARGS=2 # Script requires at least two arguments. E_BADARGS=65 FILE=$1 let LETTERS=$#-1 # How many letters specified (as command-line args). # (Subtract 1 from number of command-line args.) show_help(){ echo echo Usage: `basename $0` file letters echo Note: `basename $0` arguments are case sensitive. echo Example: `basename $0` foobar.txt G n U L i N U x. echo } # Checks number of arguments. if [ $# -lt $MINARGS ]; then echo echo "Not enough arguments." echo show_help exit $E_BADARGS fi # Checks if file exists. if [ ! -f $FILE ]; then echo "File "$FILE" does not exist." exit $E_BADARGS fi # Counts letter occurrences . for n in `seq $LETTERS`; do shift if [[ `echo -n "$1" | wc -c` -eq 1 ]]; then # Checks arg. echo "$1" -> `cat $FILE | tr -cd "$1" | wc -c` # Counting. else echo "$1 is not a single char." fi done exit $? # This script has exactly the same functionality as letter-count2.sh, #+ but executes faster. Chapter 15. External Filters, Programs and Commands 298
- 305. Advanced Bash-Scripting Guide # Why? Somewhat more capable than seq, jot is a classic UNIX utility that is not normally included in a standard Linux distro. However, the source rpm is available for download from the MIT repository. Unlike seq, jot can generate a sequence of random numbers, using the -r option. bash$ jot -r 3 999 1069 1272 1428 getopt The getopt command parses command-line options preceded by a dash. This external command corresponds to the getopts Bash builtin. Using getopt permits handling long options by means of the -l flag, and this also allows parameter reshuffling. Example 15-56. Using getopt to parse command-line options #!/bin/bash # Using getopt # Try the following when invoking this script: # sh ex33a.sh -a # sh ex33a.sh -abc # sh ex33a.sh -a -b -c # sh ex33a.sh -d # sh ex33a.sh -dXYZ # sh ex33a.sh -d XYZ # sh ex33a.sh -abcd # sh ex33a.sh -abcdZ # sh ex33a.sh -z # sh ex33a.sh a # Explain the results of each of the above. E_OPTERR=65 if [ "$#" -eq 0 ] then # Script needs at least one command-line argument. echo "Usage $0 -[options a,b,c]" exit $E_OPTERR fi set -- `getopt "abcd:" "$@"` # Sets positional parameters to command-line arguments. # What happens if you use "$*" instead of "$@"? while [ ! -z "$1" ] do case "$1" in -a) echo "Option "a"";; -b) echo "Option "b"";; -c) echo "Option "c"";; -d) echo "Option "d" $2";; *) break;; esac Chapter 15. External Filters, Programs and Commands 299
- 306. Advanced Bash-Scripting Guide shift done # It is usually better to use the 'getopts' builtin in a script. # See "ex33.sh." exit 0 As Peggy Russell points out: It is often necessary to include an eval to correctly process whitespace and quotes. args=$(getopt -o a:bc:d -- "$@") eval set -- "$args" See Example 9-14 for a simplified emulation of getopt. run-parts The run-parts command [73] executes all the scripts in a target directory, sequentially in ASCII-sorted filename order. Of course, the scripts need to have execute permission. The cron daemon invokes run-parts to run the scripts in the /etc/cron.* directories. yes In its default behavior the yes command feeds a continuous string of the character y followed by a line feed to stdout. A control-C terminates the run. A different output string may be specified, as in yes different string, which would continually output different string to stdout. One might well ask the purpose of this. From the command-line or in a script, the output of yes can be redirected or piped into a program expecting user input. In effect, this becomes a sort of poor man's version of expect. yes | fsck /dev/hda1 runs fsck non-interactively (careful!). yes | rm -r dirname has same effect as rm -rf dirname (careful!). Caution advised when piping yes to a potentially dangerous system command, such as fsck or fdisk. It might have unintended consequences. The yes command parses variables, or more accurately, it echoes parsed variables. For example: bash$ yes $BASH_VERSION 3.1.17(1)-release 3.1.17(1)-release 3.1.17(1)-release 3.1.17(1)-release 3.1.17(1)-release . . . This particular "feature" may be used to create a very large ASCII file on the fly: bash$ yes $PATH > huge_file.txt Ctl-C Chapter 15. External Filters, Programs and Commands 300
- 307. Advanced Bash-Scripting Guide Hit Ctl-C very quickly, or you just might get more than you bargained for. . . . The yes command may be emulated in a very simple script function. yes () { # Trivial emulation of "yes" ... local DEFAULT_TEXT="y" while [ true ] # Endless loop. do if [ -z "$1" ] then echo "$DEFAULT_TEXT" else # If argument ... echo "$1" # ... expand and echo it. fi done # The only things missing are the } #+ --help and --version options. banner Prints arguments as a large vertical banner to stdout, using an ASCII character (default '#'). This may be redirected to a printer for hardcopy. Note that banner has been dropped from many Linux distros. printenv Show all the environmental variables set for a particular user. bash$ printenv | grep HOME HOME=/home/bozo lp The lp and lpr commands send file(s) to the print queue, to be printed as hard copy. [74] These commands trace the origin of their names to the line printers of another era. bash$ lp file1.txt or bash lp <file1.txt It is often useful to pipe the formatted output from pr to lp. bash$ pr -options file1.txt | lp Formatting packages, such as groff and Ghostscript may send their output directly to lp. bash$ groff -Tascii file.tr | lp bash$ gs -options | lp file.ps Related commands are lpq, for viewing the print queue, and lprm, for removing jobs from the print queue. tee [UNIX borrows an idea from the plumbing trade.] This is a redirection operator, but with a difference. Like the plumber's tee, it permits "siphoning off" to a file the output of a command or commands within a pipe, but without affecting the result. This is useful for printing an ongoing process to a file or paper, perhaps to keep track of it for debugging purposes. Chapter 15. External Filters, Programs and Commands 301
- 308. Advanced Bash-Scripting Guide (redirection) |----> to file | ==========================|==================== command ---> command ---> |tee ---> command ---> ---> output of pipe =============================================== cat listfile* | sort | tee check.file | uniq > result.file # ^^^^^^^^^^^^^^ ^^^^ # The file "check.file" contains the concatenated sorted "listfiles," #+ before the duplicate lines are removed by 'uniq.' mkfifo This obscure command creates a named pipe, a temporary first-in-first-out buffer for transferring data between processes. [75] Typically, one process writes to the FIFO, and the other reads from it. See Example A-14. #!/bin/bash # This short script by Omair Eshkenazi. # Used in ABS Guide with permission (thanks!). mkfifo pipe1 # Yes, pipes can be given names. mkfifo pipe2 # Hence the designation "named pipe." (cut -d' ' -f1 | tr "a-z" "A-Z") >pipe2 <pipe1 & ls -l | tr -s ' ' | cut -d' ' -f3,9- | tee pipe1 | cut -d' ' -f2 | paste - pipe2 rm -f pipe1 rm -f pipe2 # No need to kill background processes when script terminates (why not?). exit $? Now, invoke the script and explain the output: sh mkfifo-example.sh 4830.tar.gz BOZO pipe1 BOZO pipe2 BOZO mkfifo-example.sh BOZO Mixed.msg BOZO pathchk This command checks the validity of a filename. If the filename exceeds the maximum allowable length (255 characters) or one or more of the directories in its path is not searchable, then an error message results. Unfortunately, pathchk does not return a recognizable error code, and it is therefore pretty much useless in a script. Consider instead the file test operators. dd This is the somewhat obscure and much feared data duplicator command. Originally a utility for exchanging data on magnetic tapes between UNIX minicomputers and IBM mainframes, this command still has its uses. The dd command simply copies a file (or stdin/stdout), but with conversions. Possible conversions are ASCII/EBCDIC, [76] upper/lower case, swapping of byte pairs between input and output, and skipping and/or truncating the head or tail of the input file. Chapter 15. External Filters, Programs and Commands 302
- 309. Advanced Bash-Scripting Guide # Converting a file to all uppercase: dd if=$filename conv=ucase > $filename.uppercase # lcase # For lower case conversion Some basic options to dd are: ◊ if=INFILE INFILE is the source file. ◊ of=OUTFILE OUTFILE is the target file, the file that will have the data written to it. ◊ bs=BLOCKSIZE This is the size of each block of data being read and written, usually a power of 2. ◊ skip=BLOCKS How many blocks of data to skip in INFILE before starting to copy. This is useful when the INFILE has "garbage" or garbled data in its header or when it is desirable to copy only a portion of the INFILE. ◊ seek=BLOCKS How many blocks of data to skip in OUTFILE before starting to copy, leaving blank data at beginning of OUTFILE. ◊ count=BLOCKS Copy only this many blocks of data, rather than the entire INFILE. ◊ conv=CONVERSION Type of conversion to be applied to INFILE data before copying operation. A dd --help lists all the options this powerful utility takes. Example 15-57. A script that copies itself #!/bin/bash # self-copy.sh # This script copies itself. file_subscript=copy dd if=$0 of=$0.$file_subscript 2>/dev/null # Suppress messages from dd: ^^^^^^^^^^^ exit $? # A program whose only output is its own source code #+ is called a "quine" per Willard Quine. # Does this script qualify as a quine? Example 15-58. Exercising dd Chapter 15. External Filters, Programs and Commands 303
- 310. Advanced Bash-Scripting Guide #!/bin/bash # exercising-dd.sh # Script by Stephane Chazelas. # Somewhat modified by ABS Guide author. infile=$0 # This script. outfile=log.txt # Output file left behind. n=3 p=5 dd if=$infile of=$outfile bs=1 skip=$((n-1)) count=$((p-n+1)) 2> /dev/null # Extracts characters n to p (3 to 5) from this script. # -------------------------------------------------------- echo -n "hello world" | dd cbs=1 conv=unblock 2> /dev/null # Echoes "hello world" vertically. # Why? A newline follows each character dd emits. exit 0 To demonstrate just how versatile dd is, let's use it to capture keystrokes. Example 15-59. Capturing Keystrokes #!/bin/bash # dd-keypress.sh: Capture keystrokes without needing to press ENTER. keypresses=4 # Number of keypresses to capture. old_tty_setting=$(stty -g) # Save old terminal settings. echo "Press $keypresses keys." stty -icanon -echo # Disable canonical mode. # Disable local echo. keys=$(dd bs=1 count=$keypresses 2> /dev/null) # 'dd' uses stdin, if "if" (input file) not specified. stty "$old_tty_setting" # Restore old terminal settings. echo "You pressed the "$keys" keys." # Thanks, Stephane Chazelas, for showing the way. exit 0 The dd command can do random access on a data stream. echo -n . | dd bs=1 seek=4 of=file conv=notrunc # The "conv=notrunc" option means that the output file #+ will not be truncated. # Thanks, S.C. The dd command can copy raw data and disk images to and from devices, such as floppies and tape drives (Example A-5). A common use is creating boot floppies. Chapter 15. External Filters, Programs and Commands 304
- 311. Advanced Bash-Scripting Guide dd if=kernel-image of=/dev/fd0H1440 Similarly, dd can copy the entire contents of a floppy, even one formatted with a "foreign" OS, to the hard drive as an image file. dd if=/dev/fd0 of=/home/bozo/projects/floppy.img Other applications of dd include initializing temporary swap files (Example 28-2) and ramdisks (Example 28-3). It can even do a low-level copy of an entire hard drive partition, although this is not necessarily recommended. People (with presumably nothing better to do with their time) are constantly thinking of interesting applications of dd. Example 15-60. Securely deleting a file #!/bin/bash # blot-out.sh: Erase "all" traces of a file. # This script overwrites a target file alternately #+ with random bytes, then zeros before finally deleting it. # After that, even examining the raw disk sectors by conventional methods #+ will not reveal the original file data. PASSES=7 # Number of file-shredding passes. # Increasing this slows script execution, #+ especially on large target files. BLOCKSIZE=1 # I/O with /dev/urandom requires unit block size, #+ otherwise you get weird results. E_BADARGS=70 # Various error exit codes. E_NOT_FOUND=71 E_CHANGED_MIND=72 if [ -z "$1" ] # No filename specified. then echo "Usage: `basename $0` filename" exit $E_BADARGS fi file=$1 if [ ! -e "$file" ] then echo "File "$file" not found." exit $E_NOT_FOUND fi echo; echo -n "Are you absolutely sure you want to blot out "$file" (y/n)? " read answer case "$answer" in [nN]) echo "Changed your mind, huh?" exit $E_CHANGED_MIND ;; *) echo "Blotting out file "$file".";; esac Chapter 15. External Filters, Programs and Commands 305
- 312. Advanced Bash-Scripting Guide flength=$(ls -l "$file" | awk '{print $5}') # Field 5 is file length. pass_count=1 chmod u+w "$file" # Allow overwriting/deleting the file. echo while [ "$pass_count" -le "$PASSES" ] do echo "Pass #$pass_count" sync # Flush buffers. dd if=/dev/urandom of=$file bs=$BLOCKSIZE count=$flength # Fill with random bytes. sync # Flush buffers again. dd if=/dev/zero of=$file bs=$BLOCKSIZE count=$flength # Fill with zeros. sync # Flush buffers yet again. let "pass_count += 1" echo done rm -f $file # Finally, delete scrambled and shredded file. sync # Flush buffers a final time. echo "File "$file" blotted out and deleted."; echo exit 0 # This is a fairly secure, if inefficient and slow method #+ of thoroughly "shredding" a file. # The "shred" command, part of the GNU "fileutils" package, #+ does the same thing, although more efficiently. # The file cannot not be "undeleted" or retrieved by normal methods. # However . . . #+ this simple method would *not* likely withstand #+ sophisticated forensic analysis. # This script may not play well with a journaled file system. # Exercise (difficult): Fix it so it does. # Tom Vier's "wipe" file-deletion package does a much more thorough job #+ of file shredding than this simple script. # http://www.ibiblio.org/pub/Linux/utils/file/wipe-2.0.0.tar.bz2 # For an in-depth analysis on the topic of file deletion and security, #+ see Peter Gutmann's paper, #+ "Secure Deletion of Data From Magnetic and Solid-State Memory". # http://www.cs.auckland.ac.nz/~pgut001/pubs/secure_del.html See also the dd thread entry in the bibliography. od The od, or octal dump filter converts input (or files) to octal (base-8) or other bases. This is useful for viewing or processing binary data files or otherwise unreadable system device files, such as /dev/urandom, and as a filter for binary data. Chapter 15. External Filters, Programs and Commands 306
- 313. Advanced Bash-Scripting Guide head -c4 /dev/urandom | od -N4 -tu4 | sed -ne '1s/.* //p' # Sample output: 1324725719, 3918166450, 2989231420, etc. # From rnd.sh example script, by Stéphane Chazelas See also Example 9-31 and Example A-36. hexdump Performs a hexadecimal, octal, decimal, or ASCII dump of a binary file. This command is the rough equivalent of od, above, but not nearly as useful. May be used to view the contents of a binary file, in combination with dd and less. dd if=/bin/ls | hexdump -C | less # The -C option nicely formats the output in tabular form. objdump Displays information about an object file or binary executable in either hexadecimal form or as a disassembled listing (with the -d option). bash$ objdump -d /bin/ls /bin/ls: file format elf32-i386 Disassembly of section .init: 080490bc <.init>: 80490bc: 55 push %ebp 80490bd: 89 e5 mov %esp,%ebp . . . mcookie This command generates a "magic cookie," a 128-bit (32-character) pseudorandom hexadecimal number, normally used as an authorization "signature" by the X server. This also available for use in a script as a "quick 'n dirty" random number. random000=$(mcookie) Of course, a script could use md5sum for the same purpose. # Generate md5 checksum on the script itself. random001=`md5sum $0 | awk '{print $1}'` # Uses 'awk' to strip off the filename. The mcookie command gives yet another way to generate a "unique" filename. Example 15-61. Filename generator #!/bin/bash # tempfile-name.sh: temp filename generator BASE_STR=`mcookie` # 32-character magic cookie. POS=11 # Arbitrary position in magic cookie string. LEN=5 # Get $LEN consecutive characters. prefix=temp # This is, after all, a "temp" file. # For more "uniqueness," generate the #+ filename prefix using the same method #+ as the suffix, below. suffix=${BASE_STR:POS:LEN} # Extract a 5-character string, Chapter 15. External Filters, Programs and Commands 307
- 314. Advanced Bash-Scripting Guide #+ starting at position 11. temp_filename=$prefix.$suffix # Construct the filename. echo "Temp filename = "$temp_filename"" # sh tempfile-name.sh # Temp filename = temp.e19ea # Compare this method of generating "unique" filenames #+ with the 'date' method in ex51.sh. exit 0 units This utility converts between different units of measure. While normally invoked in interactive mode, units may find use in a script. Example 15-62. Converting meters to miles #!/bin/bash # unit-conversion.sh convert_units () # Takes as arguments the units to convert. { cf=$(units "$1" "$2" | sed --silent -e '1p' | awk '{print $2}') # Strip off everything except the actual conversion factor. echo "$cf" } Unit1=miles Unit2=meters cfactor=`convert_units $Unit1 $Unit2` quantity=3.73 result=$(echo $quantity*$cfactor | bc) echo "There are $result $Unit2 in $quantity $Unit1." # What happens if you pass incompatible units, #+ such as "acres" and "miles" to the function? exit 0 m4 A hidden treasure, m4 is a powerful macro [77] processing filter, virtually a complete language. Although originally written as a pre-processor for RatFor, m4 turned out to be useful as a stand-alone utility. In fact, m4 combines some of the functionality of eval, tr, and awk, in addition to its extensive macro expansion facilities. The April, 2002 issue of Linux Journal has a very nice article on m4 and its uses. Example 15-63. Using m4 #!/bin/bash Chapter 15. External Filters, Programs and Commands 308
- 315. Advanced Bash-Scripting Guide # m4.sh: Using the m4 macro processor # Strings string=abcdA01 echo "len($string)" | m4 # 7 echo "substr($string,4)" | m4 # A01 echo "regexp($string,[0-1][0-1],&Z)" | m4 # 01Z # Arithmetic echo "incr(22)" | m4 # 23 echo "eval(99 / 3)" | m4 # 33 exit xmessage This X-based variant of echo pops up a message/query window on the desktop. xmessage Left click to continue -button okay zenity The zenity utility is adept at displaying GTK+ dialog widgets and very suitable for scripting purposes. doexec The doexec command enables passing an arbitrary list of arguments to a binary executable. In particular, passing argv[0] (which corresponds to $0 in a script) lets the executable be invoked by various names, and it can then carry out different sets of actions, according to the name by which it was called. What this amounts to is roundabout way of passing options to an executable. For example, the /usr/local/bin directory might contain a binary called "aaa". Invoking doexec /usr/local/bin/aaa list would list all those files in the current working directory beginning with an "a", while invoking (the same executable with) doexec /usr/local/bin/aaa delete would delete those files. The various behaviors of the executable must be defined within the code of the executable itself, analogous to something like the following in a shell script: case `basename $0` in "name1" ) do_something;; "name2" ) do_something_else;; "name3" ) do_yet_another_thing;; * ) bail_out;; esac dialog The dialog family of tools provide a method of calling interactive "dialog" boxes from a script. The more elaborate variations of dialog -- gdialog, Xdialog, and kdialog -- actually invoke X-Windows widgets. sox The sox, or "sound exchange" command plays and performs transformations on sound files. In fact, the /usr/bin/play executable (now deprecated) is nothing but a shell wrapper for sox. For example, sox soundfile.wav soundfile.au changes a WAV sound file into a (Sun audio format) AU sound file. Shell scripts are ideally suited for batch-processing sox operations on sound files. For examples, see the Linux Radio Timeshift HOWTO and the MP3do Project. Chapter 15. External Filters, Programs and Commands 309
- 316. Chapter 16. System and Administrative Commands The startup and shutdown scripts in /etc/rc.d illustrate the uses (and usefulness) of many of these comands. These are usually invoked by root and used for system maintenance or emergency filesystem repairs. Use with caution, as some of these commands may damage your system if misused. Users and Groups users Show all logged on users. This is the approximate equivalent of who -q. groups Lists the current user and the groups she belongs to. This corresponds to the $GROUPS internal variable, but gives the group names, rather than the numbers. bash$ groups bozita cdrom cdwriter audio xgrp bash$ echo $GROUPS 501 chown, chgrp The chown command changes the ownership of a file or files. This command is a useful method that root can use to shift file ownership from one user to another. An ordinary user may not change the ownership of files, not even her own files. [78] root# chown bozo *.txt The chgrp command changes the group ownership of a file or files. You must be owner of the file(s) as well as a member of the destination group (or root) to use this operation. chgrp --recursive dunderheads *.data # The "dunderheads" group will now own all the "*.data" files #+ all the way down the $PWD directory tree (that's what "recursive" means). useradd, userdel The useradd administrative command adds a user account to the system and creates a home directory for that particular user, if so specified. The corresponding userdel command removes a user account from the system [79] and deletes associated files. The adduser command is a synonym for useradd and is usually a symbolic link to it. usermod Modify a user account. Changes may be made to the password, group membership, expiration date, and other attributes of a given user's account. With this command, a user's password may be locked, which has the effect of disabling the account. groupmod Modify a given group. The group name and/or ID number may be changed using this command. id The id command lists the real and effective user IDs and the group IDs of the user associated with the current process. This is the counterpart to the $UID, $EUID, and $GROUPS internal Bash variables. bash$ id uid=501(bozo) gid=501(bozo) groups=501(bozo),22(cdrom),80(cdwriter),81(audio) Chapter 16. System and Administrative Commands 310
- 317. Advanced Bash-Scripting Guide bash$ echo $UID 501 The id command shows the effective IDs only when they differ from the real ones. Also see Example 9-5. lid The lid (list ID) command shows the group(s) that a given user belongs to, or alternately, the users belonging to a given group. May be invoked only by root. root# lid bozo bozo(gid=500) root# lid daemon bin(gid=1) daemon(gid=2) adm(gid=4) lp(gid=7) who Show all users logged on to the system. bash$ who bozo tty1 Apr 27 17:45 bozo pts/0 Apr 27 17:46 bozo pts/1 Apr 27 17:47 bozo pts/2 Apr 27 17:49 The -m gives detailed information about only the current user. Passing any two arguments to who is the equivalent of who -m, as in who am i or who The Man. bash$ who -m localhost.localdomain!bozo pts/2 Apr 27 17:49 whoami is similar to who -m, but only lists the user name. bash$ whoami bozo w Show all logged on users and the processes belonging to them. This is an extended version of who. The output of w may be piped to grep to find a specific user and/or process. bash$ w | grep startx bozo tty1 - 4:22pm 6:41 4.47s 0.45s startx logname Show current user's login name (as found in /var/run/utmp). This is a near-equivalent to whoami, above. bash$ logname bozo bash$ whoami bozo Chapter 16. System and Administrative Commands 311
- 318. Advanced Bash-Scripting Guide However . . . bash$ su Password: ...... bash# whoami root bash# logname bozo While logname prints the name of the logged in user, whoami gives the name of the user attached to the current process. As we have just seen, sometimes these are not the same. su Runs a program or script as a substitute user. su rjones starts a shell as user rjones. A naked su defaults to root. See Example A-14. sudo Runs a command as root (or another user). This may be used in a script, thus permitting a regular user to run the script. #!/bin/bash # Some commands. sudo cp /root/secretfile /home/bozo/secret # Some more commands. The file /etc/sudoers holds the names of users permitted to invoke sudo. passwd Sets, changes, or manages a user's password. The passwd command can be used in a script, but probably should not be. Example 16-1. Setting a new password #!/bin/bash # setnew-password.sh: For demonstration purposes only. # Not a good idea to actually run this script. # This script must be run as root. ROOT_UID=0 # Root has $UID 0. E_WRONG_USER=65 # Not root? E_NOSUCHUSER=70 SUCCESS=0 if [ "$UID" -ne "$ROOT_UID" ] then echo; echo "Only root can run this script."; echo exit $E_WRONG_USER else echo echo "You should know better than to run this script, root." echo "Even root users get the blues... " echo fi Chapter 16. System and Administrative Commands 312
- 319. Advanced Bash-Scripting Guide username=bozo NEWPASSWORD=security_violation # Check if bozo lives here. grep -q "$username" /etc/passwd if [ $? -ne $SUCCESS ] then echo "User $username does not exist." echo "No password changed." exit $E_NOSUCHUSER fi echo "$NEWPASSWORD" | passwd --stdin "$username" # The '--stdin' option to 'passwd' permits #+ getting a new password from stdin (or a pipe). echo; echo "User $username's password changed!" # Using the 'passwd' command in a script is dangerous. exit 0 The passwd command's -l, -u, and -d options permit locking, unlocking, and deleting a user's password. Only root may use these options. ac Show users' logged in time, as read from /var/log/wtmp. This is one of the GNU accounting utilities. bash$ ac total 68.08 last List last logged in users, as read from /var/log/wtmp. This command can also show remote logins. For example, to show the last few times the system rebooted: bash$ last reboot reboot system boot 2.6.9-1.667 Fri Feb 4 18:18 (00:02) reboot system boot 2.6.9-1.667 Fri Feb 4 15:20 (01:27) reboot system boot 2.6.9-1.667 Fri Feb 4 12:56 (00:49) reboot system boot 2.6.9-1.667 Thu Feb 3 21:08 (02:17) . . . wtmp begins Tue Feb 1 12:50:09 2005 newgrp Change user's group ID without logging out. This permits access to the new group's files. Since users may be members of multiple groups simultaneously, this command finds only limited use. Kurt Glaesemann points out that the newgrp command could prove helpful in setting the default group permissions for files a user writes. However, the chgrp command might be more convenient for this purpose. Terminals tty Chapter 16. System and Administrative Commands 313
- 320. Advanced Bash-Scripting Guide Echoes the name (filename) of the current user's terminal. Note that each separate xterm window counts as a different terminal. bash$ tty /dev/pts/1 stty Shows and/or changes terminal settings. This complex command, used in a script, can control terminal behavior and the way output displays. See the info page, and study it carefully. Example 16-2. Setting an erase character #!/bin/bash # erase.sh: Using "stty" to set an erase character when reading input. echo -n "What is your name? " read name # Try to backspace #+ to erase characters of input. # Problems? echo "Your name is $name." stty erase '#' # Set "hashmark" (#) as erase character. echo -n "What is your name? " read name # Use # to erase last character typed. echo "Your name is $name." exit 0 # Even after the script exits, the new key value remains set. # Exercise: How would you reset the erase character to the default value? Example 16-3. secret password: Turning off terminal echoing #!/bin/bash # secret-pw.sh: secret password echo echo -n "Enter password " read passwd echo "password is $passwd" echo -n "If someone had been looking over your shoulder, " echo "your password would have been compromised." echo && echo # Two line-feeds in an "and list." stty -echo # Turns off screen echo. echo -n "Enter password again " read passwd echo echo "password is $passwd" echo stty echo # Restores screen echo. exit 0 # Do an 'info stty' for more on this useful-but-tricky command. Chapter 16. System and Administrative Commands 314
- 321. Advanced Bash-Scripting Guide A creative use of stty is detecting a user keypress (without hitting ENTER). Example 16-4. Keypress detection #!/bin/bash # keypress.sh: Detect a user keypress ("hot keys"). echo old_tty_settings=$(stty -g) # Save old settings (why?). stty -icanon Keypress=$(head -c1) # or $(dd bs=1 count=1 2> /dev/null) # on non-GNU systems echo echo "Key pressed was ""$Keypress""." echo stty "$old_tty_settings" # Restore old settings. # Thanks, Stephane Chazelas. exit 0 Also see Example 9-3 and Example A-43. terminals and modes Normally, a terminal works in the canonical mode. When a user hits a key, the resulting character does not immediately go to the program actually running in this terminal. A buffer local to the terminal stores keystrokes. When the user hits the ENTER key, this sends all the stored keystrokes to the program running. There is even a basic line editor inside the terminal. bash$ stty -a speed 9600 baud; rows 36; columns 96; line = 0; intr = ^C; quit = ^; erase = ^H; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; ... isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt Using canonical mode, it is possible to redefine the special keys for the local terminal line editor. bash$ cat > filexxx wha<ctl-W>I<ctl-H>foo bar<ctl-U>hello world<ENTER> <ctl-D> bash$ cat filexxx hello world bash$ wc -c < filexxx 12 The process controlling the terminal receives only 12 characters (11 alphabetic ones, plus a newline), although the user hit 26 keys. Chapter 16. System and Administrative Commands 315
- 322. Advanced Bash-Scripting Guide In non-canonical ("raw") mode, every key hit (including special editing keys such as ctl-H) sends a character immediately to the controlling process. The Bash prompt disables both icanon and echo, since it replaces the basic terminal line editor with its own more elaborate one. For example, when you hit ctl-A at the Bash prompt, there's no ^A echoed by the terminal, but Bash gets a 1 character, interprets it, and moves the cursor to the begining of the line. Stéphane Chazelas setterm Set certain terminal attributes. This command writes to its terminal's stdout a string that changes the behavior of that terminal. bash$ setterm -cursor off bash$ The setterm command can be used within a script to change the appearance of text written to stdout, although there are certainly better tools available for this purpose. setterm -bold on echo bold hello setterm -bold off echo normal hello tset Show or initialize terminal settings. This is a less capable version of stty. bash$ tset -r Terminal type is xterm-xfree86. Kill is control-U (^U). Interrupt is control-C (^C). setserial Set or display serial port parameters. This command must be run by root and is usually found in a system setup script. # From /etc/pcmcia/serial script: IRQ=`setserial /dev/$DEVICE | sed -e 's/.*IRQ: //'` setserial /dev/$DEVICE irq 0 ; setserial /dev/$DEVICE irq $IRQ getty, agetty The initialization process for a terminal uses getty or agetty to set it up for login by a user. These commands are not used within user shell scripts. Their scripting counterpart is stty. mesg Enables or disables write access to the current user's terminal. Disabling access would prevent another user on the network to write to the terminal. It can be quite annoying to have a message about ordering pizza suddenly appear in the middle of the text file you are editing. On a multi-user network, you might therefore wish to disable write access to your terminal when you need to avoid interruptions. wall Chapter 16. System and Administrative Commands 316
- 323. Advanced Bash-Scripting Guide This is an acronym for "write all," i.e., sending a message to all users at every terminal logged into the network. It is primarily a system administrator's tool, useful, for example, when warning everyone that the system will shortly go down due to a problem (see Example 18-1). bash$ wall System going down for maintenance in 5 minutes! Broadcast message from bozo (pts/1) Sun Jul 8 13:53:27 2001... System going down for maintenance in 5 minutes! If write access to a particular terminal has been disabled with mesg, then wall cannot send a message to that terminal. Information and Statistics uname Output system specifications (OS, kernel version, etc.) to stdout. Invoked with the -a option, gives verbose system info (see Example 15-5). The -s option shows only the OS type. bash$ uname Linux bash$ uname -s Linux bash$ uname -a Linux iron.bozo 2.6.15-1.2054_FC5 #1 Tue Mar 14 15:48:33 EST 2006 i686 i686 i386 GNU/Linux arch Show system architecture. Equivalent to uname -m. See Example 10-26. bash$ arch i686 bash$ uname -m i686 lastcomm Gives information about previous commands, as stored in the /var/account/pacct file. Command name and user name can be specified by options. This is one of the GNU accounting utilities. lastlog List the last login time of all system users. This references the /var/log/lastlog file. bash$ lastlog root tty1 Fri Dec 7 18:43:21 -0700 2001 bin **Never logged in** daemon **Never logged in** ... bozo tty1 Sat Dec 8 21:14:29 -0700 2001 bash$ lastlog | grep root root tty1 Fri Dec 7 18:43:21 -0700 2001 Chapter 16. System and Administrative Commands 317
- 324. Advanced Bash-Scripting Guide This command will fail if the user invoking it does not have read permission for the /var/log/lastlog file. lsof List open files. This command outputs a detailed table of all currently open files and gives information about their owner, size, the processes associated with them, and more. Of course, lsof may be piped to grep and/or awk to parse and analyze its results. bash$ lsof COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME init 1 root mem REG 3,5 30748 30303 /sbin/init init 1 root mem REG 3,5 73120 8069 /lib/ld-2.1.3.so init 1 root mem REG 3,5 931668 8075 /lib/libc-2.1.3.so cardmgr 213 root mem REG 3,5 36956 30357 /sbin/cardmgr ... The lsof command is a useful, if complex administrative tool. If you are unable to dismount a filesystem and get an error message that it is still in use, then running lsof helps determine which files are still open on that filesystem. The -i option lists open network socket files, and this can help trace intrusion or hack attempts. bash$ lsof -an -i tcp COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME firefox 2330 bozo 32u IPv4 9956 TCP 66.0.118.137:57596->67.112.7.104:http ... firefox 2330 bozo 38u IPv4 10535 TCP 66.0.118.137:57708->216.79.48.24:http ... strace System trace: diagnostic and debugging tool for tracing system calls and signals. This command and ltrace, following, are useful for diagnosing why a given program or package fails to run . . . perhaps due to missing libraries or related causes. bash$ strace df execve("/bin/df", ["df"], [/* 45 vars */]) = 0 uname({sys="Linux", node="bozo.localdomain", ...}) = 0 brk(0) = 0x804f5e4 ... This is the Linux equivalent of the Solaris truss command. ltrace Library trace: diagnostic and debugging tool that traces library calls invoked by a given command. bash$ ltrace df __libc_start_main(0x804a910, 1, 0xbfb589a4, 0x804fb70, 0x804fb68 <unfinished ...>: setlocale(6, "") = "en_US.UTF-8" bindtextdomain("coreutils", "/usr/share/locale") = "/usr/share/locale" textdomain("coreutils") = "coreutils" __cxa_atexit(0x804b650, 0, 0, 0x8052bf0, 0xbfb58908) = 0 getenv("DF_BLOCK_SIZE") = NULL ... nmap Network mapper and port scanner. This command scans a server to locate open ports and the services associated with those ports. It can also report information about packet filters and firewalls. This is an important security tool for locking down a network against hacking attempts. Chapter 16. System and Administrative Commands 318
- 325. Advanced Bash-Scripting Guide #!/bin/bash SERVER=$HOST # localhost.localdomain (127.0.0.1). PORT_NUMBER=25 # SMTP port. nmap $SERVER | grep -w "$PORT_NUMBER" # Is that particular port open? # grep -w matches whole words only, #+ so this wouldn't match port 1025, for example. exit 0 # 25/tcp open smtp nc The nc (netcat) utility is a complete toolkit for connecting to and listening to TCP and UDP ports. It is useful as a diagnostic and testing tool and as a component in simple script-based HTTP clients and servers. bash$ nc localhost.localdomain 25 220 localhost.localdomain ESMTP Sendmail 8.13.1/8.13.1; Thu, 31 Mar 2005 15:41:35 -0700 Example 16-5. Checking a remote server for identd #! /bin/sh ## Duplicate DaveG's ident-scan thingie using netcat. Oooh, he'll be p*ssed. ## Args: target port [port port port ...] ## Hose stdout _and_ stderr together. ## ## Advantages: runs slower than ident-scan, giving remote inetd less cause ##+ for alarm, and only hits the few known daemon ports you specify. ## Disadvantages: requires numeric-only port args, the output sleazitude, ##+ and won't work for r-services when coming from high source ports. # Script author: Hobbit <hobbit@avian.org> # Used in ABS Guide with permission. # --------------------------------------------------- E_BADARGS=65 # Need at least two args. TWO_WINKS=2 # How long to sleep. THREE_WINKS=3 IDPORT=113 # Authentication "tap ident" port. RAND1=999 RAND2=31337 TIMEOUT0=9 TIMEOUT1=8 TIMEOUT2=4 # --------------------------------------------------- case "${2}" in "" ) echo "Need HOST and at least one PORT." ; exit $E_BADARGS ;; esac # Ping 'em once and see if they *are* running identd. nc -z -w $TIMEOUT0 "$1" $IDPORT || { echo "Oops, $1 isn't running identd." ; exit 0 ; } # -z scans for listening daemons. # -w $TIMEOUT = How long to try to connect. # Generate a randomish base port. RP=`expr $$ % $RAND1 + $RAND2` Chapter 16. System and Administrative Commands 319
- 326. Advanced Bash-Scripting Guide TRG="$1" shift while test "$1" ; do nc -v -w $TIMEOUT1 -p ${RP} "$TRG" ${1} < /dev/null > /dev/null & PROC=$! sleep $THREE_WINKS echo "${1},${RP}" | nc -w $TIMEOUT2 -r "$TRG" $IDPORT 2>&1 sleep $TWO_WINKS # Does this look like a lamer script or what . . . ? # ABS Guide author comments: "Ain't really all that bad . . . #+ kinda clever, actually." kill -HUP $PROC RP=`expr ${RP} + 1` shift done exit $? # Notes: # ----- # Try commenting out line 30 and running this script #+ with "localhost.localdomain 25" as arguments. # For more of Hobbit's 'nc' example scripts, #+ look in the documentation: #+ the /usr/share/doc/nc-X.XX/scripts directory. And, of course, there's Dr. Andrew Tridgell's notorious one-line script in the BitKeeper Affair: echo clone | nc thunk.org 5000 > e2fsprogs.dat free Shows memory and cache usage in tabular form. The output of this command lends itself to parsing, using grep, awk or Perl. The procinfo command shows all the information that free does, and much more. bash$ free total used free shared buffers cached Mem: 30504 28624 1880 15820 1608 16376 -/+ buffers/cache: 10640 19864 Swap: 68540 3128 65412 To show unused RAM memory: bash$ free | grep Mem | awk '{ print $4 }' 1880 procinfo Extract and list information and statistics from the /proc pseudo-filesystem. This gives a very extensive and detailed listing. bash$ procinfo | grep Bootup Bootup: Wed Mar 21 15:15:50 2001 Load average: 0.04 0.21 0.34 3/47 6829 lsdev List devices, that is, show installed hardware. bash$ lsdev Chapter 16. System and Administrative Commands 320
- 327. Advanced Bash-Scripting Guide Device DMA IRQ I/O Ports ------------------------------------------------ cascade 4 2 dma 0080-008f dma1 0000-001f dma2 00c0-00df fpu 00f0-00ff ide0 14 01f0-01f7 03f6-03f6 ... du Show (disk) file usage, recursively. Defaults to current working directory, unless otherwise specified. bash$ du -ach 1.0k ./wi.sh 1.0k ./tst.sh 1.0k ./random.file 6.0k . 6.0k total df Shows filesystem usage in tabular form. bash$ df Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda5 273262 92607 166547 36% / /dev/hda8 222525 123951 87085 59% /home /dev/hda7 1408796 1075744 261488 80% /usr dmesg Lists all system bootup messages to stdout. Handy for debugging and ascertaining which device drivers were installed and which system interrupts in use. The output of dmesg may, of course, be parsed with grep, sed, or awk from within a script. bash$ dmesg | grep hda Kernel command line: ro root=/dev/hda2 hda: IBM-DLGA-23080, ATA DISK drive hda: 6015744 sectors (3080 MB) w/96KiB Cache, CHS=746/128/63 hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4 stat Gives detailed and verbose statistics on a given file (even a directory or device file) or set of files. bash$ stat test.cru File: "test.cru" Size: 49970 Allocated Blocks: 100 Filetype: Regular File Mode: (0664/-rw-rw-r--) Uid: ( 501/ bozo) Gid: ( 501/ bozo) Device: 3,8 Inode: 18185 Links: 1 Access: Sat Jun 2 16:40:24 2001 Modify: Sat Jun 2 16:40:24 2001 Change: Sat Jun 2 16:40:24 2001 If the target file does not exist, stat returns an error message. bash$ stat nonexistent-file nonexistent-file: No such file or directory In a script, you can use stat to extract information about files (and filesystems) and set variables accordingly. Chapter 16. System and Administrative Commands 321
- 328. Advanced Bash-Scripting Guide #!/bin/bash # fileinfo2.sh # Per suggestion of Joël Bourquard and . . . # http://www.linuxquestions.org/questions/showthread.php?t=410766 FILENAME=testfile.txt file_name=$(stat -c%n "$FILENAME") # Same as "$FILENAME" of course. file_owner=$(stat -c%U "$FILENAME") file_size=$(stat -c%s "$FILENAME") # Certainly easier than using "ls -l $FILENAME" #+ and then parsing with sed. file_inode=$(stat -c%i "$FILENAME") file_type=$(stat -c%F "$FILENAME") file_access_rights=$(stat -c%A "$FILENAME") echo "File name: $file_name" echo "File owner: $file_owner" echo "File size: $file_size" echo "File inode: $file_inode" echo "File type: $file_type" echo "File access rights: $file_access_rights" exit 0 sh fileinfo2.sh File name: testfile.txt File owner: bozo File size: 418 File inode: 1730378 File type: regular file File access rights: -rw-rw-r-- vmstat Display virtual memory statistics. bash$ vmstat procs memory swap io system cpu r b w swpd free buff cache si so bi bo in cs us sy id 0 0 0 0 11040 2636 38952 0 0 33 7 271 88 8 3 89 netstat Show current network statistics and information, such as routing tables and active connections. This utility accesses information in /proc/net (Chapter 27). See Example 27-4. netstat -r is equivalent to route. bash$ netstat Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State Active UNIX domain sockets (w/o servers) Proto RefCnt Flags Type State I-Node Path unix 11 [ ] DGRAM 906 /dev/log unix 3 [ ] STREAM CONNECTED 4514 /tmp/.X11-unix/X0 unix 3 [ ] STREAM CONNECTED 4513 . . . Chapter 16. System and Administrative Commands 322
- 329. Advanced Bash-Scripting Guide A netstat -lptu shows sockets that are listening to ports, and the associated processes. This can be useful for determining whether a computer has been hacked or compromised. uptime Shows how long the system has been running, along with associated statistics. bash$ uptime 10:28pm up 1:57, 3 users, load average: 0.17, 0.34, 0.27 A load average of 1 or less indicates that the system handles processes immediately. A load average greater than 1 means that processes are being queued. When the load average gets above 3, then system performance is significantly degraded. hostname Lists the system's host name. This command sets the host name in an /etc/rc.d setup script (/etc/rc.d/rc.sysinit or similar). It is equivalent to uname -n, and a counterpart to the $HOSTNAME internal variable. bash$ hostname localhost.localdomain bash$ echo $HOSTNAME localhost.localdomain Similar to the hostname command are the domainname, dnsdomainname, nisdomainname, and ypdomainname commands. Use these to display or set the system DNS or NIS/YP domain name. Various options to hostname also perform these functions. hostid Echo a 32-bit hexadecimal numerical identifier for the host machine. bash$ hostid 7f0100 This command allegedly fetches a "unique" serial number for a particular system. Certain product registration procedures use this number to brand a particular user license. Unfortunately, hostid only returns the machine network address in hexadecimal, with pairs of bytes transposed. The network address of a typical non-networked Linux machine, is found in /etc/hosts. bash$ cat /etc/hosts 127.0.0.1 localhost.localdomain localhost As it happens, transposing the bytes of 127.0.0.1, we get 0.127.1.0, which translates in hex to 007f0100, the exact equivalent of what hostid returns, above. There exist only a few million other Linux machines with this identical hostid. sar Invoking sar (System Activity Reporter) gives a very detailed rundown on system statistics. The Santa Cruz Operation ("Old" SCO) released sar as Open Source in June, 1999. This command is not part of the base Linux distribution, but may be obtained as part of the sysstat utilities package, written by Sebastien Godard. Chapter 16. System and Administrative Commands 323
- 330. Advanced Bash-Scripting Guide bash$ sar Linux 2.4.9 (brooks.seringas.fr) 09/26/03 10:30:00 CPU %user %nice %system %iowait %idle 10:40:00 all 2.21 10.90 65.48 0.00 21.41 10:50:00 all 3.36 0.00 72.36 0.00 24.28 11:00:00 all 1.12 0.00 80.77 0.00 18.11 Average: all 2.23 3.63 72.87 0.00 21.27 14:32:30 LINUX RESTART 15:00:00 CPU %user %nice %system %iowait %idle 15:10:00 all 8.59 2.40 17.47 0.00 71.54 15:20:00 all 4.07 1.00 11.95 0.00 82.98 15:30:00 all 0.79 2.94 7.56 0.00 88.71 Average: all 6.33 1.70 14.71 0.00 77.26 readelf Show information and statistics about a designated elf binary. This is part of the binutils package. bash$ readelf -h /bin/bash ELF Header: Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) . . . size The size [/path/to/binary] command gives the segment sizes of a binary executable or archive file. This is mainly of use to programmers. bash$ size /bin/bash text data bss dec hex filename 495971 22496 17392 535859 82d33 /bin/bash System Logs logger Appends a user-generated message to the system log (/var/log/messages). You do not have to be root to invoke logger. logger Experiencing instability in network connection at 23:10, 05/21. # Now, do a 'tail /var/log/messages'. By embedding a logger command in a script, it is possible to write debugging information to /var/log/messages. logger -t $0 -i Logging at line "$LINENO". # The "-t" option specifies the tag for the logger entry. # The "-i" option records the process ID. # tail /var/log/message # ... # Jul 7 20:48:58 localhost ./test.sh[1712]: Logging at line 3. Chapter 16. System and Administrative Commands 324
- 331. Advanced Bash-Scripting Guide logrotate This utility manages the system log files, rotating, compressing, deleting, and/or e-mailing them, as appropriate. This keeps the /var/log from getting cluttered with old log files. Usually cron runs logrotate on a daily basis. Adding an appropriate entry to /etc/logrotate.conf makes it possible to manage personal log files, as well as system-wide ones. Stefano Falsetto has created rottlog, which he considers to be an improved version of logrotate. Job Control ps Process Statistics: lists currently executing processes by owner and PID (process ID). This is usually invoked with ax or aux options, and may be piped to grep or sed to search for a specific process (see Example 14-14 and Example 27-3). bash$ ps ax | grep sendmail 295 ? S 0:00 sendmail: accepting connections on port 25 To display system processes in graphical "tree" format: ps afjx or ps ax --forest. pgrep, pkill Combining the ps command with grep or kill. bash$ ps a | grep mingetty 2212 tty2 Ss+ 0:00 /sbin/mingetty tty2 2213 tty3 Ss+ 0:00 /sbin/mingetty tty3 2214 tty4 Ss+ 0:00 /sbin/mingetty tty4 2215 tty5 Ss+ 0:00 /sbin/mingetty tty5 2216 tty6 Ss+ 0:00 /sbin/mingetty tty6 4849 pts/2 S+ 0:00 grep mingetty bash$ pgrep mingetty 2212 mingetty 2213 mingetty 2214 mingetty 2215 mingetty 2216 mingetty Compare the action of pkill with killall. pstree Lists currently executing processes in "tree" format. The -p option shows the PIDs, as well as the process names. top Continuously updated display of most cpu-intensive processes. The -b option displays in text mode, so that the output may be parsed or accessed from a script. bash$ top -b 8:30pm up 3 min, 3 users, load average: 0.49, 0.32, 0.13 45 processes: 44 sleeping, 1 running, 0 zombie, 0 stopped CPU states: 13.6% user, 7.3% system, 0.0% nice, 78.9% idle Mem: 78396K av, 65468K used, 12928K free, 0K shrd, 2352K buff Swap: 157208K av, 0K used, 157208K free 37244K cached Chapter 16. System and Administrative Commands 325
- 332. Advanced Bash-Scripting Guide PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND 848 bozo 17 0 996 996 800 R 5.6 1.2 0:00 top 1 root 8 0 512 512 444 S 0.0 0.6 0:04 init 2 root 9 0 0 0 0 SW 0.0 0.0 0:00 keventd ... nice Run a background job with an altered priority. Priorities run from 19 (lowest) to -20 (highest). Only root may set the negative (higher) priorities. Related commands are renice and snice, which change the priority of a running process or processes, and skill, which sends a kill signal to a process or processes. nohup Keeps a command running even after user logs off. The command will run as a foreground process unless followed by &. If you use nohup within a script, consider coupling it with a wait to avoid creating an orphan or zombie process. pidof Identifies process ID (PID) of a running job. Since job control commands, such as kill and renice act on the PID of a process (not its name), it is sometimes necessary to identify that PID. The pidof command is the approximate counterpart to the $PPID internal variable. bash$ pidof xclock 880 Example 16-6. pidof helps kill a process #!/bin/bash # kill-process.sh NOPROCESS=2 process=xxxyyyzzz # Use nonexistent process. # For demo purposes only... # ... don't want to actually kill any actual process with this script. # # If, for example, you wanted to use this script to logoff the Internet, # process=pppd t=`pidof $process` # Find pid (process id) of $process. # The pid is needed by 'kill' (can't 'kill' by program name). if [ -z "$t" ] # If process not present, 'pidof' returns null. then echo "Process $process was not running." echo "Nothing killed." exit $NOPROCESS fi kill $t # May need 'kill -9' for stubborn process. # Need a check here to see if process allowed itself to be killed. # Perhaps another " t=`pidof $process` " or ... # This entire script could be replaced by # kill $(pidof -x process_name) Chapter 16. System and Administrative Commands 326
- 333. Advanced Bash-Scripting Guide # or # killall process_name # but it would not be as instructive. exit 0 fuser Identifies the processes (by PID) that are accessing a given file, set of files, or directory. May also be invoked with the -k option, which kills those processes. This has interesting implications for system security, especially in scripts preventing unauthorized users from accessing system services. bash$ fuser -u /usr/bin/vim /usr/bin/vim: 3207e(bozo) bash$ fuser -u /dev/null /dev/null: 3009(bozo) 3010(bozo) 3197(bozo) 3199(bozo) One important application for fuser is when physically inserting or removing storage media, such as CD ROM disks or USB flash drives. Sometimes trying a umount fails with a device is busy error message. This means that some user(s) and/or process(es) are accessing the device. An fuser -um /dev/device_name will clear up the mystery, so you can kill any relevant processes. bash$ umount /mnt/usbdrive umount: /mnt/usbdrive: device is busy bash$ fuser -um /dev/usbdrive /mnt/usbdrive: 1772c(bozo) bash$ kill -9 1772 bash$ umount /mnt/usbdrive The fuser command, invoked with the -n option identifies the processes accessing a port. This is especially useful in combination with nmap. root# nmap localhost.localdomain PORT STATE SERVICE 25/tcp open smtp root# fuser -un tcp 25 25/tcp: 2095(root) root# ps ax | grep 2095 | grep -v grep 2095 ? Ss 0:00 sendmail: accepting connections cron Administrative program scheduler, performing such duties as cleaning up and deleting system log files and updating the slocate database. This is the superuser version of at (although each user may have their own crontab file which can be changed with the crontab command). It runs as a daemon and executes scheduled entries from /etc/crontab. Some flavors of Linux run crond, Matthew Dillon's version of cron. Chapter 16. System and Administrative Commands 327
- 334. Advanced Bash-Scripting Guide Process Control and Booting init The init command is the parent of all processes. Called in the final step of a bootup, init determines the runlevel of the system from /etc/inittab. Invoked by its alias telinit, and by root only. telinit Symlinked to init, this is a means of changing the system runlevel, usually done for system maintenance or emergency filesystem repairs. Invoked only by root. This command can be dangerous -- be certain you understand it well before using! runlevel Shows the current and last runlevel, that is, whether the system is halted (runlevel 0), in single-user mode (1), in multi-user mode (2 or 3), in X Windows (5), or rebooting (6). This command accesses the /var/run/utmp file. halt, shutdown, reboot Command set to shut the system down, usually just prior to a power down. On some Linux distros, the halt command has 755 permissions, so it can be invoked by a non-root user. A careless halt in a terminal or a script may shut down the system! service Starts or stops a system service. The startup scripts in /etc/init.d and /etc/rc.d use this command to start services at bootup. root# /sbin/service iptables stop Flushing firewall rules: [ OK ] Setting chains to policy ACCEPT: filter [ OK ] Unloading iptables modules: [ OK ] Network ifconfig Network interface configuration and tuning utility. bash$ ifconfig -a lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:700 (700.0 b) TX bytes:700 (700.0 b) The ifconfig command is most often used at bootup to set up the interfaces, or to shut them down when rebooting. # Code snippets from /etc/rc.d/init.d/network # ... # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 0 [ -x /sbin/ifconfig ] || exit 0 Chapter 16. System and Administrative Commands 328
- 335. Advanced Bash-Scripting Guide # ... for i in $interfaces ; do if ifconfig $i 2>/dev/null | grep -q "UP" >/dev/null 2>&1 ; then action "Shutting down interface $i: " ./ifdown $i boot fi # The GNU-specific "-q" option to "grep" means "quiet", i.e., #+ producing no output. # Redirecting output to /dev/null is therefore not strictly necessary. # ... echo "Currently active devices:" echo `/sbin/ifconfig | grep ^[a-z] | awk '{print $1}'` # ^^^^^ should be quoted to prevent globbing. # The following also work. # echo $(/sbin/ifconfig | awk '/^[a-z]/ { print $1 })' # echo $(/sbin/ifconfig | sed -e 's/ .*//') # Thanks, S.C., for additional comments. See also Example 29-6. iwconfig This is the command set for configuring a wireless network. It is the wireless equivalent of ifconfig, above. ip General purpose utility for setting up, changing, and analyzing IP (Internet Protocol) networks and attached devices. This command is part of the iproute2 package. bash$ ip link show 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:d0:59:ce:af:da brd ff:ff:ff:ff:ff:ff 3: sit0: <NOARP> mtu 1480 qdisc noop link/sit 0.0.0.0 brd 0.0.0.0 bash$ ip route list 169.254.0.0/16 dev lo scope link Or, in a script: #!/bin/bash # Script by Juan Nicolas Ruiz # Used with his kind permission. # Setting up (and stopping) a GRE tunnel. # --- start-tunnel.sh --- LOCAL_IP="192.168.1.17" REMOTE_IP="10.0.5.33" OTHER_IFACE="192.168.0.100" REMOTE_NET="192.168.3.0/24" /sbin/ip tunnel add netb mode gre remote $REMOTE_IP local $LOCAL_IP ttl 255 /sbin/ip addr add $OTHER_IFACE dev netb /sbin/ip link set netb up Chapter 16. System and Administrative Commands 329
- 336. Advanced Bash-Scripting Guide /sbin/ip route add $REMOTE_NET dev netb exit 0 ############################################# # --- stop-tunnel.sh --- REMOTE_NET="192.168.3.0/24" /sbin/ip route del $REMOTE_NET dev netb /sbin/ip link set netb down /sbin/ip tunnel del netb exit 0 route Show info about or make changes to the kernel routing table. bash$ route Destination Gateway Genmask Flags MSS Window irtt Iface pm3-67.bozosisp * 255.255.255.255 UH 40 0 0 ppp0 127.0.0.0 * 255.0.0.0 U 40 0 0 lo default pm3-67.bozosisp 0.0.0.0 UG 40 0 0 ppp0 chkconfig Check network and system configuration. This command lists and manages the network and system services started at bootup in the /etc/rc?.d directory. Originally a port from IRIX to Red Hat Linux, chkconfig may not be part of the core installation of some Linux flavors. bash$ chkconfig --list atd 0:off 1:off 2:off 3:on 4:on 5:on 6:off rwhod 0:off 1:off 2:off 3:off 4:off 5:off 6:off ... tcpdump Network packet "sniffer." This is a tool for analyzing and troubleshooting traffic on a network by dumping packet headers that match specified criteria. Dump ip packet traffic between hosts bozoville and caduceus: bash$ tcpdump ip host bozoville and caduceus Of course, the output of tcpdump can be parsed with certain of the previously discussed text processing utilities. Filesystem mount Mount a filesystem, usually on an external device, such as a floppy or CDROM. The file /etc/fstab provides a handy listing of available filesystems, partitions, and devices, including options, that may be automatically or manually mounted. The file /etc/mtab shows the currently mounted filesystems and partitions (including the virtual ones, such as /proc). mount -a mounts all filesystems and partitions listed in /etc/fstab, except those with a noauto option. At bootup, a startup script in /etc/rc.d (rc.sysinit or something similar) invokes this Chapter 16. System and Administrative Commands 330
- 337. Advanced Bash-Scripting Guide to get everything mounted. mount -t iso9660 /dev/cdrom /mnt/cdrom # Mounts CD ROM. ISO 9660 is a standard CD ROM filesystem. mount /mnt/cdrom # Shortcut, if /mnt/cdrom listed in /etc/fstab The versatile mount command can even mount an ordinary file on a block device, and the file will act as if it were a filesystem. Mount accomplishes that by associating the file with a loopback device. One application of this is to mount and examine an ISO9660 filesystem image before burning it onto a CDR. [80] Example 16-7. Checking a CD image # As root... mkdir /mnt/cdtest # Prepare a mount point, if not already there. mount -r -t iso9660 -o loop cd-image.iso /mnt/cdtest # Mount the image. # "-o loop" option equivalent to "losetup /dev/loop0" cd /mnt/cdtest # Now, check the image. ls -alR # List the files in the directory tree there. # And so forth. umount Unmount a currently mounted filesystem. Before physically removing a previously mounted floppy or CDROM disk, the device must be umounted, else filesystem corruption may result. umount /mnt/cdrom # You may now press the eject button and safely remove the disk. The automount utility, if properly installed, can mount and unmount floppies or CDROM disks as they are accessed or removed. On "multispindle" laptops with swappable floppy and optical drives, this can cause problems, however. gnome-mount The newer Linux distros have deprecated mount and umount. The successor, for command-line mounting of removable storage devices, is gnome-mount. It can take the -d option to mount a device file by its listing in /dev. For example, to mount a USB flash drive: bash$ gnome-mount -d /dev/sda1 gnome-mount 0.4 bash$ df . . . /dev/sda1 63584 12034 51550 19% /media/disk sync Forces an immediate write of all updated data from buffers to hard drive (synchronize drive with buffers). While not strictly necessary, a sync assures the sys admin or user that the data just changed will survive a sudden power failure. In the olden days, a sync; sync (twice, just to make absolutely sure) was a useful precautionary measure before a system reboot. Chapter 16. System and Administrative Commands 331
- 338. Advanced Bash-Scripting Guide At times, you may wish to force an immediate buffer flush, as when securely deleting a file (see Example 15-60) or when the lights begin to flicker. losetup Sets up and configures loopback devices. Example 16-8. Creating a filesystem in a file SIZE=1000000 # 1 meg head -c $SIZE < /dev/zero > file # Set up file of designated size. losetup /dev/loop0 file # Set it up as loopback device. mke2fs /dev/loop0 # Create filesystem. mount -o loop /dev/loop0 /mnt # Mount it. # Thanks, S.C. mkswap Creates a swap partition or file. The swap area must subsequently be enabled with swapon. swapon, swapoff Enable / disable swap partitition or file. These commands usually take effect at bootup and shutdown. mke2fs Create a Linux ext2 filesystem. This command must be invoked as root. Example 16-9. Adding a new hard drive #!/bin/bash # Adding a second hard drive to system. # Software configuration. Assumes hardware already mounted. # From an article by the author of the ABS Guide. # In issue #38 of _Linux Gazette_, http://www.linuxgazette.com. ROOT_UID=0 # This script must be run as root. E_NOTROOT=67 # Non-root exit error. if [ "$UID" -ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi # Use with extreme caution! # If something goes wrong, you may wipe out your current filesystem. NEWDISK=/dev/hdb # Assumes /dev/hdb vacant. Check! MOUNTPOINT=/mnt/newdisk # Or choose another mount point. fdisk $NEWDISK mke2fs -cv $NEWDISK1 # Check for bad blocks (verbose output). # Note: ^ /dev/hdb1, *not* /dev/hdb! mkdir $MOUNTPOINT chmod 777 $MOUNTPOINT # Makes new drive accessible to all users. # Now, test ... Chapter 16. System and Administrative Commands 332
- 339. Advanced Bash-Scripting Guide # mount -t ext2 /dev/hdb1 /mnt/newdisk # Try creating a directory. # If it works, umount it, and proceed. # Final step: # Add the following line to /etc/fstab. # /dev/hdb1 /mnt/newdisk ext2 defaults 1 1 exit See also Example 16-8 and Example 28-3. tune2fs Tune ext2 filesystem. May be used to change filesystem parameters, such as maximum mount count. This must be invoked as root. This is an extremely dangerous command. Use it at your own risk, as you may inadvertently destroy your filesystem. dumpe2fs Dump (list to stdout) very verbose filesystem info. This must be invoked as root. root# dumpe2fs /dev/hda7 | grep 'ount count' dumpe2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 Mount count: 6 Maximum mount count: 20 hdparm List or change hard disk parameters. This command must be invoked as root, and it may be dangerous if misused. fdisk Create or change a partition table on a storage device, usually a hard drive. This command must be invoked as root. Use this command with extreme caution. If something goes wrong, you may destroy an existing filesystem. fsck, e2fsck, debugfs Filesystem check, repair, and debug command set. fsck: a front end for checking a UNIX filesystem (may invoke other utilities). The actual filesystem type generally defaults to ext2. e2fsck: ext2 filesystem checker. debugfs: ext2 filesystem debugger. One of the uses of this versatile, but dangerous command is to (attempt to) recover deleted files. For advanced users only! All of these should be invoked as root, and they can damage or destroy a filesystem if misused. badblocks Checks for bad blocks (physical media flaws) on a storage device. This command finds use when formatting a newly installed hard drive or testing the integrity of backup media. [81] As an example, badblocks /dev/fd0 tests a floppy disk. The badblocks command may be invoked destructively (overwrite all data) or in non-destructive read-only mode. If root user owns the device to be tested, as is generally the case, then root must Chapter 16. System and Administrative Commands 333
- 340. Advanced Bash-Scripting Guide invoke this command. lsusb, usbmodules The lsusb command lists all USB (Universal Serial Bus) buses and the devices hooked up to them. The usbmodules command outputs information about the driver modules for connected USB devices. bash$ lsusb Bus 001 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 9 Hub bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 . . . lspci Lists pci busses present. bash$ lspci 00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 04) 00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #3) (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) . . . mkbootdisk Creates a boot floppy which can be used to bring up the system if, for example, the MBR (master boot record) becomes corrupted. Of special interest is the --iso option, which uses mkisofs to create a bootable ISO9660 filesystem image suitable for burning a bootable CDR. The mkbootdisk command is actually a Bash script, written by Erik Troan, in the /sbin directory. mkisofs Creates an ISO9660 filesystem suitable for a CDR image. chroot CHange ROOT directory. Normally commands are fetched from $PATH, relative to /, the default root directory. This changes the root directory to a different one (and also changes the working directory to there). This is useful for security purposes, for instance when the system administrator wishes to restrict certain users, such as those telnetting in, to a secured portion of the filesystem (this is sometimes referred to as confining a guest user to a "chroot jail"). Note that after a chroot, the execution path for system binaries is no longer valid. A chroot /opt would cause references to /usr/bin to be translated to /opt/usr/bin. Likewise, chroot /aaa/bbb /bin/ls would redirect future instances of ls to /aaa/bbb as the base directory, rather than / as is normally the case. An alias XX 'chroot /aaa/bbb ls' in a user's Chapter 16. System and Administrative Commands 334
- 341. Advanced Bash-Scripting Guide ~/.bashrc effectively restricts which portion of the filesystem she may run command "XX" on. The chroot command is also handy when running from an emergency boot floppy (chroot to /dev/fd0), or as an option to lilo when recovering from a system crash. Other uses include installation from a different filesystem (an rpm option) or running a readonly filesystem from a CD ROM. Invoke only as root, and use with care. It might be necessary to copy certain system files to a chrooted directory, since the normal $PATH can no longer be relied upon. lockfile This utility is part of the procmail package (www.procmail.org). It creates a lock file, a semaphore that controls access to a file, device, or resource. Definition: A semaphore is a flag or signal. (The usage originated in railroading, where a colored flag, lantern, or striped movable arm semaphore indicated whether a particular track was in use and therefore unavailable for another train.) A UNIX process can check the appropriate semaphore to determine whether a particular resource is available/accessible. The lock file serves as a flag that this particular file, device, or resource is in use by a process (and is therefore "busy"). The presence of a lock file permits only restricted access (or no access) to other processes. lockfile /home/bozo/lockfiles/$0.lock # Creates a write-protected lockfile prefixed with the name of the script. lockfile /home/bozo/lockfiles/${0##*/}.lock # A safer version of the above, as pointed out by E. Choroba. Lock files are used in such applications as protecting system mail folders from simultaneously being changed by multiple users, indicating that a modem port is being accessed, and showing that an instance of Firefox is using its cache. Scripts may check for the existence of a lock file created by a certain process to check if that process is running. Note that if a script attempts to create a lock file that already exists, the script will likely hang. Normally, applications create and check for lock files in the /var/lock directory. [82] A script can test for the presence of a lock file by something like the following. appname=xyzip # Application "xyzip" created lock file "/var/lock/xyzip.lock". if [ -e "/var/lock/$appname.lock" ] then #+ Prevent other programs & scripts # from accessing files/resources used by xyzip. ... flock Much less useful than the lockfile command is flock. It sets an "advisory" lock on a file and then executes a command while the lock is on. This is to prevent any other process from setting a lock on that file until completion of the specified command. flock $0 cat $0 > lockfile__$0 # Set a lock on the script the above line appears in, #+ while listing the script to stdout. Chapter 16. System and Administrative Commands 335
- 342. Advanced Bash-Scripting Guide Unlike lockfile, flock does not automatically create a lock file. mknod Creates block or character device files (may be necessary when installing new hardware on the system). The MAKEDEV utility has virtually all of the functionality of mknod, and is easier to use. MAKEDEV Utility for creating device files. It must be run as root, and in the /dev directory. It is a sort of advanced version of mknod. tmpwatch Automatically deletes files which have not been accessed within a specified period of time. Usually invoked by cron to remove stale log files. Backup dump, restore The dump command is an elaborate filesystem backup utility, generally used on larger installations and networks. [83] It reads raw disk partitions and writes a backup file in a binary format. Files to be backed up may be saved to a variety of storage media, including disks and tape drives. The restore command restores backups made with dump. fdformat Perform a low-level format on a floppy disk (/dev/fd0*). System Resources ulimit Sets an upper limit on use of system resources. Usually invoked with the -f option, which sets a limit on file size (ulimit -f 1000 limits files to 1 meg maximum). [84] The -t option limits the coredump size (ulimit -c 0 eliminates coredumps). Normally, the value of ulimit would be set in /etc/profile and/or ~/.bash_profile (see Appendix G). Judicious use of ulimit can protect a system against the dreaded fork bomb. #!/bin/bash # This script is for illustrative purposes only. # Run it at your own peril -- it WILL freeze your system. while true # Endless loop. do $0 & # This script invokes itself . . . #+ forks an infinite number of times . . . #+ until the system freezes up because all resources exhausted. done # This is the notorious "sorcerer's appentice" scenario. exit 0 # Will not exit here, because this script will never terminate. A ulimit -Hu XX (where XX is the user process limit) in /etc/profile would abort this script when it exceeded the preset limit. quota Display user or group disk quotas. setquota Set user or group disk quotas from the command-line. umask User file creation permissions mask. Limit the default file attributes for a particular user. All files created by that user take on the attributes specified by umask. The (octal) value passed to umask Chapter 16. System and Administrative Commands 336
- 343. Advanced Bash-Scripting Guide defines the file permissions disabled. For example, umask 022 ensures that new files will have at most 755 permissions (777 NAND 022). [85] Of course, the user may later change the attributes of particular files with chmod. The usual practice is to set the value of umask in /etc/profile and/or ~/.bash_profile (see Appendix G). Example 16-10. Using umask to hide an output file from prying eyes #!/bin/bash # rot13a.sh: Same as "rot13.sh" script, but writes output to "secure" file. # Usage: ./rot13a.sh filename # or ./rot13a.sh <filename # or ./rot13a.sh and supply keyboard input (stdin) umask 177 # File creation mask. # Files created by this script #+ will have 600 permissions. OUTFILE=decrypted.txt # Results output to file "decrypted.txt" #+ which can only be read/written # by invoker of script (or root). cat "$@" | tr 'a-zA-Z' 'n-za-mN-ZA-M' > $OUTFILE # ^^ Input from stdin or a file. ^^^^^^^^^^ Output redirected to file. exit 0 rdev Get info about or make changes to root device, swap space, or video mode. The functionality of rdev has generally been taken over by lilo, but rdev remains useful for setting up a ram disk. This is a dangerous command, if misused. Modules lsmod List installed kernel modules. bash$ lsmod Module Size Used by autofs 9456 2 (autoclean) opl3 11376 0 serial_cs 5456 0 (unused) sb 34752 0 uart401 6384 0 [sb] sound 58368 0 [opl3 sb uart401] soundlow 464 0 [sound] soundcore 2800 6 [sb sound] ds 6448 2 [serial_cs] i82365 22928 2 pcmcia_core 45984 0 [serial_cs ds i82365] Doing a cat /proc/modules gives the same information. insmod Force installation of a kernel module (use modprobe instead, when possible). Must be invoked as root. Chapter 16. System and Administrative Commands 337
- 344. Advanced Bash-Scripting Guide rmmod Force unloading of a kernel module. Must be invoked as root. modprobe Module loader that is normally invoked automatically in a startup script. Must be invoked as root. depmod Creates module dependency file. Usually invoked from a startup script. modinfo Output information about a loadable module. bash$ modinfo hid filename: /lib/modules/2.4.20-6/kernel/drivers/usb/hid.o description: "USB HID support drivers" author: "Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>" license: "GPL" Miscellaneous env Runs a program or script with certain environmental variables set or changed (without changing the overall system environment). The [varname=xxx] permits changing the environmental variable varname for the duration of the script. With no options specified, this command lists all the environmental variable settings. [86] The first line of a script (the "sha-bang" line) may use env when the path to the shell or interpreter is unknown. #! /usr/bin/env perl print "This Perl script will run,n"; print "even when I don't know where to find Perl.n"; # Good for portable cross-platform scripts, # where the Perl binaries may not be in the expected place. # Thanks, S.C. Or even ... #!/bin/env bash # Queries the $PATH enviromental variable for the location of bash. # Therefore ... # This script will run where Bash is not in its usual place, in /bin. ... ldd Show shared lib dependencies for an executable file. bash$ ldd /bin/ls libc.so.6 => /lib/libc.so.6 (0x4000c000) /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x80000000) watch Run a command repeatedly, at specified time intervals. The default is two-second intervals, but this may be changed with the -n option. Chapter 16. System and Administrative Commands 338
- 345. Advanced Bash-Scripting Guide watch -n 5 tail /var/log/messages # Shows tail end of system log, /var/log/messages, every five seconds. Unfortunately, piping the output of watch command to grep does not work. strip Remove the debugging symbolic references from an executable binary. This decreases its size, but makes debugging it impossible. This command often occurs in a Makefile, but rarely in a shell script. nm List symbols in an unstripped compiled binary. rdist Remote distribution client: synchronizes, clones, or backs up a file system on a remote server. 16.1. Analyzing a System Script Using our knowledge of administrative commands, let us examine a system script. One of the shortest and simplest to understand scripts is "killall," [87] used to suspend running processes at system shutdown. Example 16-11. killall, from /etc/rc.d/init.d #!/bin/sh # --> Comments added by the author of this document marked by "# -->". # --> This is part of the 'rc' script package # --> by Miquel van Smoorenburg, <miquels@drinkel.nl.mugnet.org>. # --> This particular script seems to be Red Hat / FC specific # --> (may not be present in other distributions). # Bring down all unneeded services that are still running #+ (there shouldn't be any, so this is just a sanity check) for i in /var/lock/subsys/*; do # --> Standard for/in loop, but since "do" is on same line, # --> it is necessary to add ";". # Check if the script is there. [ ! -f $i ] && continue # --> This is a clever use of an "and list", equivalent to: # --> if [ ! -f "$i" ]; then continue # Get the subsystem name. subsys=${i#/var/lock/subsys/} # --> Match variable name, which, in this case, is the file name. # --> This is the exact equivalent of subsys=`basename $i`. # --> It gets it from the lock file name # -->+ (if there is a lock file, # -->+ that's proof the process has been running). # --> See the "lockfile" entry, above. # Bring the subsystem down. Chapter 16. System and Administrative Commands 339
- 346. Advanced Bash-Scripting Guide if [ -f /etc/rc.d/init.d/$subsys.init ]; then /etc/rc.d/init.d/$subsys.init stop else /etc/rc.d/init.d/$subsys stop # --> Suspend running jobs and daemons. # --> Note that "stop" is a positional parameter, # -->+ not a shell builtin. fi done That wasn't so bad. Aside from a little fancy footwork with variable matching, there is no new material there. Exercise 1. In /etc/rc.d/init.d, analyze the halt script. It is a bit longer than killall, but similar in concept. Make a copy of this script somewhere in your home directory and experiment with it (do not run it as root). Do a simulated run with the -vn flags (sh -vn scriptname). Add extensive comments. Change the "action" commands to "echos". Exercise 2. Look at some of the more complex scripts in /etc/rc.d/init.d. See if you can understand parts of them. Follow the above procedure to analyze them. For some additional insight, you might also examine the file sysvinitfiles in /usr/share/doc/initscripts-?.??, which is part of the "initscripts" documentation. Chapter 16. System and Administrative Commands 340
- 347. Part 5. Advanced Topics At this point, we are ready to delve into certain of the difficult and unusual aspects of scripting. Along the way, we will attempt to "push the envelope" in various ways and examine boundary conditions (what happens when we move into uncharted territory?). Table of Contents 17. Regular Expressions 17.1. A Brief Introduction to Regular Expressions 17.2. Globbing 18. Here Documents 18.1. Here Strings 19. I/O Redirection 19.1. Using exec 19.2. Redirecting Code Blocks 19.3. Applications 20. Subshells 21. Restricted Shells 22. Process Substitution 23. Functions 23.1. Complex Functions and Function Complexities 23.2. Local Variables 23.3. Recursion Without Local Variables 24. Aliases 25. List Constructs 26. Arrays 27. /dev and /proc 27.1. /dev 27.2. /proc 28. Of Zeros and Nulls 29. Debugging 30. Options 31. Gotchas 32. Scripting With Style 32.1. Unofficial Shell Scripting Stylesheet 33. Miscellany 33.1. Interactive and non-interactive shells and scripts 33.2. Operator Precedence 33.3. Shell Wrappers 33.4. Tests and Comparisons: Alternatives 33.5. A script calling itself (recursion) 33.6. "Colorizing" Scripts 33.7. Optimizations 33.8. Assorted Tips 33.9. Security Issues 33.10. Portability Issues 33.11. Shell Scripting Under Windows 34. Bash, versions 2, 3, and 4 34.1. Bash, version 2 Part 5. Advanced Topics 341
- 348. Advanced Bash-Scripting Guide 34.2. Bash, version 3 34.3. Bash, version 4 Part 5. Advanced Topics 342
- 349. Chapter 17. Regular Expressions . . . the intellectual activity associated with software development is largely one of gaining insight. --Stowe Boyd To fully utilize the power of shell scripting, you need to master Regular Expressions. Certain commands and utilities commonly used in scripts, such as grep, expr, sed and awk, interpret and use REs. As of version 3, Bash has acquired its own RE-match operator: =~. 17.1. A Brief Introduction to Regular Expressions An expression is a string of characters. Those characters having an interpretation above and beyond their literal meaning are called metacharacters. A quote symbol, for example, may denote speech by a person, ditto, or a meta-meaning [88] for the symbols that follow. Regular Expressions are sets of characters and/or metacharacters that match (or specify) patterns. A Regular Expression contains one or more of the following: • A character set. These are the characters retaining their literal meaning. The simplest type of Regular Expression consists only of a character set, with no metacharacters. • An anchor. These designate (anchor) the position in the line of text that the RE is to match. For example, ^, and $ are anchors. • Modifiers. These expand or narrow (modify) the range of text the RE is to match. Modifiers include the asterisk, brackets, and the backslash. The main uses for Regular Expressions (REs) are text searches and string manipulation. An RE matches a single character or a set of characters -- a string or a part of a string. • The asterisk -- * -- matches any number of repeats of the character string or RE preceding it, including zero instances. "1133*" matches 11 + one or more 3's: 113, 1133, 1133333, and so forth. • The dot -- . -- matches any one character, except a newline. [89] "13." matches 13 + at least one of any character (including a space): 1133, 11333, but not 13 (additional character missing). See Example 15-18 for a demonstration of dot single-character matching. • The caret -- ^ -- matches the beginning of a line, but sometimes, depending on context, negates the meaning of a set of characters in an RE. • The dollar sign -- $ -- at the end of an RE matches the end of a line. "XXX$" matches XXX at the end of a line. Chapter 17. Regular Expressions 343
- 350. Advanced Bash-Scripting Guide "^$" matches blank lines. • Brackets -- [...] -- enclose a set of characters to match in a single RE. "[xyz]" matches any one of the characters x, y, or z. "[c-n]" matches any one of the characters in the range c to n. "[B-Pk-y]" matches any one of the characters in the ranges B to P and k to y. "[a-z0-9]" matches any single lowercase letter or any digit. "[^b-d]" matches any character except those in the range b to d. This is an instance of ^ negating or inverting the meaning of the following RE (taking on a role similar to ! in a different context). Combined sequences of bracketed characters match common word patterns. "[Yy][Ee][Ss]" matches yes, Yes, YES, yEs, and so forth. "[0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9][0-9][0-9]" matches any Social Security number. • The backslash -- -- escapes a special character, which means that character gets interpreted literally (and is therefore no longer special). A "$" reverts back to its literal meaning of "$", rather than its RE meaning of end-of-line. Likewise a "" has the literal meaning of "". • Escaped "angle brackets" -- <...> -- mark word boundaries. The angle brackets must be escaped, since otherwise they have only their literal character meaning. "<the>" matches the word "the," but not the words "them," "there," "other," etc. bash$ cat textfile This is line 1, of which there is only one instance. This is the only instance of line 2. This is line 3, another line. This is line 4. bash$ grep 'the' textfile This is line 1, of which there is only one instance. This is the only instance of line 2. This is line 3, another line. bash$ grep '<the>' textfile This is the only instance of line 2. The only way to be certain that a particular RE works is to test it. TEST FILE: tstfile # No match. # No match. Chapter 17. Regular Expressions 344
- 351. Advanced Bash-Scripting Guide Run grep "1133*" on this file. # Match. # No match. # No match. This line contains the number 113. # Match. This line contains the number 13. # No match. This line contains the number 133. # No match. This line contains the number 1133. # Match. This line contains the number 113312. # Match. This line contains the number 1112. # No match. This line contains the number 113312312. # Match. This line contains no numbers at all. # No match. bash$ grep "1133*" tstfile Run grep "1133*" on this file. # Match. This line contains the number 113. # Match. This line contains the number 1133. # Match. This line contains the number 113312. # Match. This line contains the number 113312312. # Match. • Extended REs. Additional metacharacters added to the basic set. Used in egrep, awk, and Perl. • The question mark -- ? -- matches zero or one of the previous RE. It is generally used for matching single characters. • The plus -- + -- matches one or more of the previous RE. It serves a role similar to the *, but does not match zero occurrences. # GNU versions of sed and awk can use "+", # but it needs to be escaped. echo a111b | sed -ne '/a1+b/p' echo a111b | grep 'a1+b' echo a111b | gawk '/a1+b/' # All of above are equivalent. # Thanks, S.C. • Escaped "curly brackets" -- { } -- indicate the number of occurrences of a preceding RE to match. It is necessary to escape the curly brackets since they have only their literal character meaning otherwise. This usage is technically not part of the basic RE set. "[0-9]{5}" matches exactly five digits (characters in the range of 0 to 9). Curly brackets are not available as an RE in the "classic" (non-POSIX compliant) version of awk. However, the GNU extended version of awk, gawk, has the --re-interval option that permits them (without being escaped). bash$ echo 2222 | gawk --re-interval '/2{3}/' 2222 Perl and some egrep versions do not require escaping the curly brackets. • Parentheses -- ( ) -- enclose a group of REs. They are useful with the following "|" operator and in substring extraction using expr. Chapter 17. Regular Expressions 345
- 352. Advanced Bash-Scripting Guide • The -- | -- "or" RE operator matches any of a set of alternate characters. bash$ egrep 're(a|e)d' misc.txt People who read seem to be better informed than those who do not. The clarinet produces sound by the vibration of its reed. Some versions of sed, ed, and ex support escaped versions of the extended Regular Expressions described above, as do the GNU utilities. • POSIX Character Classes. [:class:] This is an alternate method of specifying a range of characters to match. • [:alnum:] matches alphabetic or numeric characters. This is equivalent to A-Za-z0-9. • [:alpha:] matches alphabetic characters. This is equivalent to A-Za-z. • [:blank:] matches a space or a tab. • [:cntrl:] matches control characters. • [:digit:] matches (decimal) digits. This is equivalent to 0-9. • [:graph:] (graphic printable characters). Matches characters in the range of ASCII 33 - 126. This is the same as [:print:], below, but excluding the space character. • [:lower:] matches lowercase alphabetic characters. This is equivalent to a-z. • [:print:] (printable characters). Matches characters in the range of ASCII 32 - 126. This is the same as [:graph:], above, but adding the space character. • [:space:] matches whitespace characters (space and horizontal tab). • [:upper:] matches uppercase alphabetic characters. This is equivalent to A-Z. • [:xdigit:] matches hexadecimal digits. This is equivalent to 0-9A-Fa-f. POSIX character classes generally require quoting or double brackets ([[ ]]). bash$ grep [[:digit:]] test.file abc=723 # ... if [[ $arow =~ [[:digit:]] ]] # Numerical input? then # POSIX char class if [[ $acol =~ [[:alpha:]] ]] # Number followed by a letter? Illegal! # ... # From ktour.sh example script. These character classes may even be used with globbing, to a limited extent. bash$ ls -l ?[[:digit:]][[:digit:]]? -rw-rw-r-- 1 bozo bozo 0 Aug 21 14:47 a33b POSIX character classes are used in Example 15-21 and Example 15-22. Sed, awk, and Perl, used as filters in scripts, take REs as arguments when "sifting" or transforming files or I/O streams. See Example A-12 and Example A-16 for illustrations of this. The standard reference on this complex topic is Friedl's Mastering Regular Expressions. Sed & Awk, by Dougherty and Robbins, also gives a very lucid treatment of REs. See the Bibliography for more information on these books. Chapter 17. Regular Expressions 346
- 353. Advanced Bash-Scripting Guide 17.2. Globbing Bash itself cannot recognize Regular Expressions. Inside scripts, it is commands and utilities -- such as sed and awk -- that interpret RE's. Bash does carry out filename expansion [90] -- a process known as globbing -- but this does not use the standard RE set. Instead, globbing recognizes and expands wild cards. Globbing interprets the standard wild card characters [91] -- * and ?, character lists in square brackets, and certain other special characters (such as ^ for negating the sense of a match). There are important limitations on wild card characters in globbing, however. Strings containing * will not match filenames that start with a dot, as, for example, .bashrc. [92] Likewise, the ? has a different meaning in globbing than as part of an RE. bash$ ls -l total 2 -rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 a.1 -rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 b.1 -rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 c.1 -rw-rw-r-- 1 bozo bozo 466 Aug 6 17:48 t2.sh -rw-rw-r-- 1 bozo bozo 758 Jul 30 09:02 test1.txt bash$ ls -l t?.sh -rw-rw-r-- 1 bozo bozo 466 Aug 6 17:48 t2.sh bash$ ls -l [ab]* -rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 a.1 -rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 b.1 bash$ ls -l [a-c]* -rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 a.1 -rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 b.1 -rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 c.1 bash$ ls -l [^ab]* -rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 c.1 -rw-rw-r-- 1 bozo bozo 466 Aug 6 17:48 t2.sh -rw-rw-r-- 1 bozo bozo 758 Jul 30 09:02 test1.txt bash$ ls -l {b*,c*,*est*} -rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 b.1 -rw-rw-r-- 1 bozo bozo 0 Aug 6 18:42 c.1 -rw-rw-r-- 1 bozo bozo 758 Jul 30 09:02 test1.txt Bash performs filename expansion on unquoted command-line arguments. The echo command demonstrates this. bash$ echo * a.1 b.1 c.1 t2.sh test1.txt bash$ echo t* t2.sh test1.txt bash$ echo t?.sh t2.sh Chapter 17. Regular Expressions 347
- 354. Advanced Bash-Scripting Guide It is possible to modify the way Bash interprets special characters in globbing. A set -f command disables globbing, and the nocaseglob and nullglob options to shopt change globbing behavior. See also Example 10-4. Chapter 17. Regular Expressions 348
- 355. Chapter 18. Here Documents Here and now, boys. --Aldous Huxley, Island A here document is a special-purpose code block. It uses a form of I/O redirection to feed a command list to an interactive program or a command, such as ftp, cat, or the ex text editor. COMMAND <<InputComesFromHERE ... InputComesFromHERE A limit string delineates (frames) the command list. The special symbol << designates the limit string. This has the effect of redirecting the output of a file into the stdin of the program or command. It is similar to interactive-program < command-file, where command-file contains command #1 command #2 ... The here document alternative looks like this: #!/bin/bash interactive-program <<LimitString command #1 command #2 ... LimitString Choose a limit string sufficiently unusual that it will not occur anywhere in the command list and confuse matters. Note that here documents may sometimes be used to good effect with non-interactive utilities and commands, such as, for example, wall. Example 18-1. broadcast: Sends message to everyone logged in #!/bin/bash wall <<zzz23EndOfMessagezzz23 E-mail your noontime orders for pizza to the system administrator. (Add an extra dollar for anchovy or mushroom topping.) # Additional message text goes here. # Note: 'wall' prints comment lines. zzz23EndOfMessagezzz23 # Could have been done more efficiently by # wall <message-file # However, embedding the message template in a script #+ is a quick-and-dirty one-off solution. exit Even such unlikely candidates as the vi text editor lend themselves to here documents. Chapter 18. Here Documents 349
- 356. Advanced Bash-Scripting Guide Example 18-2. dummyfile: Creates a 2-line dummy file #!/bin/bash # Noninteractive use of 'vi' to edit a file. # Emulates 'sed'. E_BADARGS=85 if [ -z "$1" ] then echo "Usage: `basename $0` filename" exit $E_BADARGS fi TARGETFILE=$1 # Insert 2 lines in file, then save. #--------Begin here document-----------# vi $TARGETFILE <<x23LimitStringx23 i This is line 1 of the example file. This is line 2 of the example file. ^[ ZZ x23LimitStringx23 #----------End here document-----------# # Note that ^[ above is a literal escape #+ typed by Control-V <Esc>. # Bram Moolenaar points out that this may not work with 'vim' #+ because of possible problems with terminal interaction. exit The above script could just as effectively have been implemented with ex, rather than vi. Here documents containing a list of ex commands are common enough to form their own category, known as ex scripts. #!/bin/bash # Replace all instances of "Smith" with "Jones" #+ in files with a ".txt" filename suffix. ORIGINAL=Smith REPLACEMENT=Jones for word in $(fgrep -l $ORIGINAL *.txt) do # ------------------------------------- ex $word <<EOF :%s/$ORIGINAL/$REPLACEMENT/g :wq EOF # :%s is the "ex" substitution command. # :wq is write-and-quit. # ------------------------------------- done Analogous to "ex scripts" are cat scripts. Chapter 18. Here Documents 350
- 357. Advanced Bash-Scripting Guide Example 18-3. Multi-line message using cat #!/bin/bash # 'echo' is fine for printing single line messages, #+ but somewhat problematic for for message blocks. # A 'cat' here document overcomes this limitation. cat <<End-of-message ------------------------------------- This is line 1 of the message. This is line 2 of the message. This is line 3 of the message. This is line 4 of the message. This is the last line of the message. ------------------------------------- End-of-message # Replacing line 7, above, with #+ cat > $Newfile <<End-of-message #+ ^^^^^^^^^^ #+ writes the output to the file $Newfile, rather than to stdout. exit 0 #-------------------------------------------- # Code below disabled, due to "exit 0" above. # S.C. points out that the following also works. echo "------------------------------------- This is line 1 of the message. This is line 2 of the message. This is line 3 of the message. This is line 4 of the message. This is the last line of the message. -------------------------------------" # However, text may not include double quotes unless they are escaped. The - option to mark a here document limit string (<<-LimitString) suppresses leading tabs (but not spaces) in the output. This may be useful in making a script more readable. Example 18-4. Multi-line message, with tabs suppressed #!/bin/bash # Same as previous example, but... # The - option to a here document <<- #+ suppresses leading tabs in the body of the document, #+ but *not* spaces. cat <<-ENDOFMESSAGE This is line 1 of the message. This is line 2 of the message. This is line 3 of the message. This is line 4 of the message. This is the last line of the message. ENDOFMESSAGE # The output of the script will be flush left. Chapter 18. Here Documents 351
- 358. Advanced Bash-Scripting Guide # Leading tab in each line will not show. # Above 5 lines of "message" prefaced by a tab, not spaces. # Spaces not affected by <<- . # Note that this option has no effect on *embedded* tabs. exit 0 A here document supports parameter and command substitution. It is therefore possible to pass different parameters to the body of the here document, changing its output accordingly. Example 18-5. Here document with replaceable parameters #!/bin/bash # Another 'cat' here document, using parameter substitution. # Try it with no command-line parameters, ./scriptname # Try it with one command-line parameter, ./scriptname Mortimer # Try it with one two-word quoted command-line parameter, # ./scriptname "Mortimer Jones" CMDLINEPARAM=1 # Expect at least command-line parameter. if [ $# -ge $CMDLINEPARAM ] then NAME=$1 # If more than one command-line param, #+ then just take the first. else NAME="John Doe" # Default, if no command-line parameter. fi RESPONDENT="the author of this fine script" cat <<Endofmessage Hello, there, $NAME. Greetings to you, $NAME, from $RESPONDENT. # This comment shows up in the output (why?). Endofmessage # Note that the blank lines show up in the output. # So does the comment. exit This is a useful script containing a here document with parameter substitution. Example 18-6. Upload a file pair to Sunsite incoming directory #!/bin/bash # upload.sh # Upload file pair (Filename.lsm, Filename.tar.gz) Chapter 18. Here Documents 352
- 359. Advanced Bash-Scripting Guide #+ to incoming directory at Sunsite/UNC (ibiblio.org). # Filename.tar.gz is the tarball itself. # Filename.lsm is the descriptor file. # Sunsite requires "lsm" file, otherwise will bounce contributions. E_ARGERROR=85 if [ -z "$1" ] then echo "Usage: `basename $0` Filename-to-upload" exit $E_ARGERROR fi Filename=`basename $1` # Strips pathname out of file name. Server="ibiblio.org" Directory="/incoming/Linux" # These need not be hard-coded into script, #+ but may instead be changed to command-line argument. Password="your.e-mail.address" # Change above to suit. ftp -n $Server <<End-Of-Session # -n option disables auto-logon user anonymous "$Password" # If this doesn't work, then try: # quote user anonymous "$Password" binary bell # Ring 'bell' after each file transfer. cd $Directory put "$Filename.lsm" put "$Filename.tar.gz" bye End-Of-Session exit 0 Quoting or escaping the "limit string" at the head of a here document disables parameter substitution within its body. The reason for this is that quoting/escaping the limit string effectively escapes the $, `, and special characters, and causes them to be interpreted literally. (Thank you, Allen Halsey, for pointing this out.) Example 18-7. Parameter substitution turned off #!/bin/bash # A 'cat' here-document, but with parameter substitution disabled. NAME="John Doe" RESPONDENT="the author of this fine script" cat <<'Endofmessage' Hello, there, $NAME. Greetings to you, $NAME, from $RESPONDENT. Endofmessage # No parameter substitution when the "limit string" is quoted or escaped. Chapter 18. Here Documents 353
- 360. Advanced Bash-Scripting Guide # Either of the following at the head of the here document would have #+ the same effect. # cat <<"Endofmessage" # cat <<Endofmessage # And, likewise: cat <<"SpecialCharTest" Directory listing would follow if limit string were not quoted. `ls -l` Arithmetic expansion would take place if limit string were not quoted. $((5 + 3)) A a single backslash would echo if limit string were not quoted. SpecialCharTest exit Disabling parameter substitution permits outputting literal text. Generating scripts or even program code is one use for this. Example 18-8. A script that generates another script #!/bin/bash # generate-script.sh # Based on an idea by Albert Reiner. OUTFILE=generated.sh # Name of the file to generate. # ----------------------------------------------------------- # 'Here document containing the body of the generated script. ( cat <<'EOF' #!/bin/bash echo "This is a generated shell script." # Note that since we are inside a subshell, #+ we can't access variables in the "outside" script. echo "Generated file will be named: $OUTFILE" # Above line will not work as normally expected #+ because parameter expansion has been disabled. # Instead, the result is literal output. a=7 b=3 let "c = $a * $b" Chapter 18. Here Documents 354
- 361. Advanced Bash-Scripting Guide echo "c = $c" exit 0 EOF ) > $OUTFILE # ----------------------------------------------------------- # Quoting the 'limit string' prevents variable expansion #+ within the body of the above 'here document.' # This permits outputting literal strings in the output file. if [ -f "$OUTFILE" ] then chmod 755 $OUTFILE # Make the generated file executable. else echo "Problem in creating file: "$OUTFILE"" fi # This method can also be used for generating #+ C programs, Perl programs, Python programs, Makefiles, #+ and the like. exit 0 It is possible to set a variable from the output of a here document. This is actually a devious form of command substitution. variable=$(cat <<SETVAR This variable runs over multiple lines. SETVAR) echo "$variable" A here document can supply input to a function in the same script. Example 18-9. Here documents and functions #!/bin/bash # here-function.sh GetPersonalData () { read firstname read lastname read address read city read state read zipcode } # This certainly looks like an interactive function, but... # Supply input to the above function. GetPersonalData <<RECORD001 Bozo Bozeman 2726 Nondescript Dr. Chapter 18. Here Documents 355
- 362. Advanced Bash-Scripting Guide Baltimore MD 21226 RECORD001 echo echo "$firstname $lastname" echo "$address" echo "$city, $state $zipcode" echo exit 0 It is possible to use : as a dummy command accepting output from a here document. This, in effect, creates an "anonymous" here document. Example 18-10. "Anonymous" Here Document #!/bin/bash : <<TESTVARIABLES ${HOSTNAME?}${USER?}${MAIL?} # Print error message if one of the variables not set. TESTVARIABLES exit $? A variation of the above technique permits "commenting out" blocks of code. Example 18-11. Commenting out a block of code #!/bin/bash # commentblock.sh : <<COMMENTBLOCK echo "This line will not echo." This is a comment line missing the "#" prefix. This is another comment line missing the "#" prefix. &*@!!++= The above line will cause no error message, because the Bash interpreter will ignore it. COMMENTBLOCK echo "Exit value of above "COMMENTBLOCK" is $?." # 0 # No error shown. echo # The above technique also comes in useful for commenting out #+ a block of working code for debugging purposes. # This saves having to put a "#" at the beginning of each line, #+ then having to go back and delete each "#" later. echo "Just before commented-out code block." # The lines of code between the double-dashed lines will not execute. # =================================================================== Chapter 18. Here Documents 356
- 363. Advanced Bash-Scripting Guide : <<DEBUGXXX for file in * do cat "$file" done DEBUGXXX # =================================================================== echo "Just after commented-out code block." exit 0 ###################################################################### # Note, however, that if a bracketed variable is contained within #+ the commented-out code block, #+ then this could cause problems. # for example: #/!/bin/bash : <<COMMENTBLOCK echo "This line will not echo." &*@!!++= ${foo_bar_bazz?} $(rm -rf /tmp/foobar/) $(touch my_build_directory/cups/Makefile) COMMENTBLOCK $ sh commented-bad.sh commented-bad.sh: line 3: foo_bar_bazz: parameter null or not set # The remedy for this is to strong-quote the 'COMMENTBLOCK' in line 49, above. : <<'COMMENTBLOCK' # Thank you, Kurt Pfeifle, for pointing this out. Yet another twist of this nifty trick makes "self-documenting" scripts possible. Example 18-12. A self-documenting script #!/bin/bash # self-document.sh: self-documenting script # Modification of "colm.sh". DOC_REQUEST=70 if [ "$1" = "-h" -o "$1" = "--help" ] # Request help. then echo; echo "Usage: $0 [directory-name]"; echo sed --silent -e '/DOCUMENTATIONXX$/,/^DOCUMENTATIONXX$/p' "$0" | sed -e '/DOCUMENTATIONXX$/d'; exit $DOC_REQUEST; fi : <<DOCUMENTATIONXX List the statistics of a specified directory in tabular format. --------------------------------------------------------------- Chapter 18. Here Documents 357
- 364. Advanced Bash-Scripting Guide The command-line parameter gives the directory to be listed. If no directory specified or directory specified cannot be read, then list the current working directory. DOCUMENTATIONXX if [ -z "$1" -o ! -r "$1" ] then directory=. else directory="$1" fi echo "Listing of "$directory":"; echo (printf "PERMISSIONS LINKS OWNER GROUP SIZE MONTH DAY HH:MM PROG-NAMEn" ; ls -l "$directory" | sed 1d) | column -t exit 0 Using a cat script is an alternate way of accomplishing this. DOC_REQUEST=70 if [ "$1" = "-h" -o "$1" = "--help" ] # Request help. then # Use a "cat script" . . . cat <<DOCUMENTATIONXX List the statistics of a specified directory in tabular format. --------------------------------------------------------------- The command-line parameter gives the directory to be listed. If no directory specified or directory specified cannot be read, then list the current working directory. DOCUMENTATIONXX exit $DOC_REQUEST fi See also Example A-28, Example A-40, Example A-41, and Example A-42 for more examples of self-documenting scripts. Here documents create temporary files, but these files are deleted after opening and are not accessible to any other process. bash$ bash -c 'lsof -a -p $$ -d0' << EOF > EOF lsof 1213 bozo 0r REG 3,5 0 30386 /tmp/t1213-0-sh (deleted) Some utilities will not work inside a here document. The closing limit string, on the final line of a here document, must start in the first character position. There can be no leading whitespace. Trailing whitespace after the limit string likewise causes unexpected behavior. The whitespace prevents the limit string from being recognized. #!/bin/bash echo "----------------------------------------------------------------------" Chapter 18. Here Documents 358
- 365. Advanced Bash-Scripting Guide cat <<LimitString echo "This is line 1 of the message inside the here document." echo "This is line 2 of the message inside the here document." echo "This is the final line of the message inside the here document." LimitString #^^^^Indented limit string. Error! This script will not behave as expected. echo "----------------------------------------------------------------------" # These comments are outside the 'here document', #+ and should not echo. echo "Outside the here document." exit 0 echo "This line had better not echo." # Follows an 'exit' command. Some people very cleverly use a single ! as a limit string. But, that's not necessarily a good idea. # This works. cat <<! Hello! ! Three more exclamations !!! ! # But . . . cat <<! Hello! Single exclamation point follows! ! ! # Crashes with an error message. # However, the following will work. cat <<EOF Hello! Single exclamation point follows! ! EOF # It's safer to use a multi-character limit string. For those tasks too complex for a here document, consider using the expect scripting language, which was specifically designed for feeding input into interactive programs. 18.1. Here Strings A here string can be considered as a stripped-down form of a here document. It consists of nothing more than COMMAND <<< $WORD, where $WORD is expanded and fed to the stdin of COMMAND. Chapter 18. Here Documents 359
- 366. Advanced Bash-Scripting Guide As a simple example, consider this alternative to the echo-grep construction. # Instead of: if echo "$VAR" | grep -q txt # if [[ $VAR = *txt* ]] # etc. # Try: if grep -q "txt" <<< "$VAR" then # ^^^ echo "$VAR contains the substring sequence "txt"" fi # Thank you, Sebastian Kaminski, for the suggestion. Or, in combination with read: String="This is a string of words." read -r -a Words <<< "$String" # The -a option to "read" #+ assigns the resulting values to successive members of an array. echo "First word in String is: ${Words[0]}" # This echo "Second word in String is: ${Words[1]}" # is echo "Third word in String is: ${Words[2]}" # a echo "Fourth word in String is: ${Words[3]}" # string echo "Fifth word in String is: ${Words[4]}" # of echo "Sixth word in String is: ${Words[5]}" # words. echo "Seventh word in String is: ${Words[6]}" # (null) # Past end of $String. # Thank you, Francisco Lobo, for the suggestion. Example 18-13. Prepending a line to a file #!/bin/bash # prepend.sh: Add text at beginning of file. # # Example contributed by Kenny Stauffer, #+ and slightly modified by document author. E_NOSUCHFILE=85 read -p "File: " file # -p arg to 'read' displays prompt. if [ ! -e "$file" ] then # Bail out if no such file. echo "File $file not found." exit $E_NOSUCHFILE fi read -p "Title: " title cat - $file <<<$title > $file.new echo "Modified file is $file.new" exit # Ends script execution. from 'man bash': Chapter 18. Here Documents 360
- 367. Advanced Bash-Scripting Guide Here Strings A variant of here documents, the format is: <<<word The word is expanded and supplied to the command on its standard input. Of course, the following also works: sed -e '1i Title: ' $file Example 18-14. Parsing a mailbox #!/bin/bash # Script by Francisco Lobo, #+ and slightly modified and commented by ABS Guide author. # Used in ABS Guide with permission. (Thank you!) # This script will not run under Bash versions < 3.0. E_MISSING_ARG=67 if [ -z "$1" ] then echo "Usage: $0 mailbox-file" exit $E_MISSING_ARG fi mbox_grep() # Parse mailbox file. { declare -i body=0 match=0 declare -a date sender declare mail header value while IFS= read -r mail # ^^^^ Reset $IFS. # Otherwise "read" will strip leading & trailing space from its input. do if [[ $mail =~ "^From " ]] # Match "From" field in message. then (( body = 0 )) # "Zero out" variables. (( match = 0 )) unset date elif (( body )) then (( match )) # echo "$mail" # Uncomment above line if you want entire body of message to display. elif [[ $mail ]]; then IFS=: read -r header value <<< "$mail" # ^^^ "here string" case "$header" in [Ff][Rr][Oo][Mm] ) [[ $value =~ "$2" ]] && (( match++ )) ;; # Match "From" line. [Dd][Aa][Tt][Ee] ) read -r -a date <<< "$value" ;; Chapter 18. Here Documents 361
- 368. Advanced Bash-Scripting Guide # ^^^ # Match "Date" line. [Rr][Ee][Cc][Ee][Ii][Vv][Ee][Dd] ) read -r -a sender <<< "$value" ;; # ^^^ # Match IP Address (may be spoofed). esac else (( body++ )) (( match )) && echo "MESSAGE ${date:+of: ${date[*]} }" # Entire $date array ^ echo "IP address of sender: ${sender[1]}" # Second field of "Received" line ^ fi done < "$1" # Redirect stdout of file into loop. } mbox_grep "$1" # Send mailbox file to function. exit $? # Exercises: # --------- # 1) Break the single function, above, into multiple functions, #+ for the sake of readability. # 2) Add additional parsing to the script, checking for various keywords. $ mailbox_grep.sh scam_mail MESSAGE of Thu, 5 Jan 2006 08:00:56 -0500 (EST) IP address of sender: 196.3.62.4 Exercise: Find other uses for here strings, such as, for example, feeding input to dc. Chapter 18. Here Documents 362
- 369. Chapter 19. I/O Redirection There are always three default files [93] open, stdin (the keyboard), stdout (the screen), and stderr (error messages output to the screen). These, and any other open files, can be redirected. Redirection simply means capturing output from a file, command, program, script, or even code block within a script (see Example 3-1 and Example 3-2) and sending it as input to another file, command, program, or script. Each open file gets assigned a file descriptor. [94] The file descriptors for stdin, stdout, and stderr are 0, 1, and 2, respectively. For opening additional files, there remain descriptors 3 to 9. It is sometimes useful to assign one of these additional file descriptors to stdin, stdout, or stderr as a temporary duplicate link. [95] This simplifies restoration to normal after complex redirection and reshuffling (see Example 19-1). COMMAND_OUTPUT > # Redirect stdout to a file. # Creates the file if not present, otherwise overwrites it. ls -lR > dir-tree.list # Creates a file containing a listing of the directory tree. : > filename # The > truncates file "filename" to zero length. # If file not present, creates zero-length file (same effect as 'touch'). # The : serves as a dummy placeholder, producing no output. > filename # The > truncates file "filename" to zero length. # If file not present, creates zero-length file (same effect as 'touch'). # (Same result as ": >", above, but this does not work with some shells.) COMMAND_OUTPUT >> # Redirect stdout to a file. # Creates the file if not present, otherwise appends to it. # Single-line redirection commands (affect only the line they are on): # -------------------------------------------------------------------- 1>filename # Redirect stdout to file "filename." 1>>filename # Redirect and append stdout to file "filename." 2>filename # Redirect stderr to file "filename." 2>>filename # Redirect and append stderr to file "filename." &>filename # Redirect both stdout and stderr to file "filename." # # Note that &>>filename #+ -- attempting to redirect and *append* #+ stdout and stderr to file "filename" -- #+ fails with the error message, #+ syntax error near unexpected token `>'. # The &>> operator is supposed to be functional in Bash 4, #+ but as of version 4.0 still is not. Chapter 19. I/O Redirection 363
- 370. Advanced Bash-Scripting Guide M>N # "M" is a file descriptor, which defaults to 1, if not explicitly set. # "N" is a filename. # File descriptor "M" is redirect to file "N." M>&N # "M" is a file descriptor, which defaults to 1, if not set. # "N" is another file descriptor. #============================================================================== # Redirecting stdout, one line at a time. LOGFILE=script.log echo "This statement is sent to the log file, "$LOGFILE"." 1>$LOGFILE echo "This statement is appended to "$LOGFILE"." 1>>$LOGFILE echo "This statement is also appended to "$LOGFILE"." 1>>$LOGFILE echo "This statement is echoed to stdout, and will not appear in "$LOGFILE"." # These redirection commands automatically "reset" after each line. # Redirecting stderr, one line at a time. ERRORFILE=script.errors bad_command1 2>$ERRORFILE # Error message sent to $ERRORFILE. bad_command2 2>>$ERRORFILE # Error message appended to $ERRORFILE. bad_command3 # Error message echoed to stderr, #+ and does not appear in $ERRORFILE. # These redirection commands also automatically "reset" after each line. #======================================================================= 2>&1 # Redirects stderr to stdout. # Error messages get sent to same place as standard output. >>filename 2>&1 bad_command >>filename 2>&1 # Appends both stdout and stderr to the file "filename" ... 2>&1 | [command(s)] bad_command 2>&1 | awk '{print $5}' # found # Sends stderr through a pipe. # |& was added to Bash 4 as an abbreviation for 2>& #+ but as of version 4.0 this still does not work. i>&j # Redirects file descriptor i to j. # All output of file pointed to by i gets sent to file pointed to by j. >&j # Redirects, by default, file descriptor 1 (stdout) to j. # All stdout gets sent to file pointed to by j. 0< FILENAME < FILENAME # Accept input from a file. # Companion command to ">", and often used in combination with it. # # grep search-word <filename [j]<>filename # Open file "filename" for reading and writing, Chapter 19. I/O Redirection 364
- 371. Advanced Bash-Scripting Guide #+ and assign file descriptor "j" to it. # If "filename" does not exist, create it. # If file descriptor "j" is not specified, default to fd 0, stdin. # # An application of this is writing at a specified place in a file. echo 1234567890 > File # Write string to "File". exec 3<> File # Open "File" and assign fd 3 to it. read -n 4 <&3 # Read only 4 characters. echo -n . >&3 # Write a decimal point there. exec 3>&- # Close fd 3. cat File # ==> 1234.67890 # Random access, by golly. | # Pipe. # General purpose process and command chaining tool. # Similar to ">", but more general in effect. # Useful for chaining commands, scripts, files, and programs together. cat *.txt | sort | uniq > result-file # Sorts the output of all the .txt files and deletes duplicate lines, # finally saves results to "result-file". Multiple instances of input and output redirection and/or pipes can be combined in a single command line. command < input-file > output-file command1 | command2 | command3 > output-file See Example 15-31 and Example A-14. Multiple output streams may be redirected to one file. ls -yz >> command.log 2>&1 # Capture result of illegal options "yz" in file "command.log." # Because stderr is redirected to the file, #+ any error messages will also be there. # Note, however, that the following does *not* give the same result. ls -yz 2>&1 >> command.log # Outputs an error message and does not write to file. # If redirecting both stdout and stderr, #+ the order of the commands makes a difference. Closing File Descriptors n<&- Close input file descriptor n. 0<&-, <&- Close stdin. n>&- Close output file descriptor n. 1>&-, >&- Close stdout. Chapter 19. I/O Redirection 365
- 372. Advanced Bash-Scripting Guide Child processes inherit open file descriptors. This is why pipes work. To prevent an fd from being inherited, close it. # Redirecting only stderr to a pipe. exec 3>&1 # Save current "value" of stdout. ls -l 2>&1 >&3 3>&- | grep bad 3>&- # Close fd 3 for 'grep' (but not 'ls'). # ^^^^ ^^^^ exec 3>&- # Now close it for the remainder of the script. # Thanks, S.C. For a more detailed introduction to I/O redirection see Appendix E. 19.1. Using exec An exec <filename command redirects stdin to a file. From that point on, all stdin comes from that file, rather than its normal source (usually keyboard input). This provides a method of reading a file line by line and possibly parsing each line of input using sed and/or awk. Example 19-1. Redirecting stdin using exec #!/bin/bash # Redirecting stdin using 'exec'. exec 6<&0 # Link file descriptor #6 with stdin. # Saves stdin. exec < data-file # stdin replaced by file "data-file" read a1 # Reads first line of file "data-file". read a2 # Reads second line of file "data-file." echo echo "Following lines read from file." echo "-------------------------------" echo $a1 echo $a2 echo; echo; echo exec 0<&6 6<&- # Now restore stdin from fd #6, where it had been saved, #+ and close fd #6 ( 6<&- ) to free it for other processes to use. # # <&6 6<&- also works. echo -n "Enter data " read b1 # Now "read" functions as expected, reading from normal stdin. echo "Input read from stdin." echo "----------------------" echo "b1 = $b1" echo exit 0 Chapter 19. I/O Redirection 366
- 373. Advanced Bash-Scripting Guide Similarly, an exec >filename command redirects stdout to a designated file. This sends all command output that would normally go to stdout to that file. exec N > filename affects the entire script or current shell. Redirection in the PID of the script or shell from that point on has changed. However . . . N > filename affects only the newly-forked process, not the entire script or shell. Thank you, Ahmed Darwish, for pointing this out. Example 19-2. Redirecting stdout using exec #!/bin/bash # reassign-stdout.sh LOGFILE=logfile.txt exec 6>&1 # Link file descriptor #6 with stdout. # Saves stdout. exec > $LOGFILE # stdout replaced with file "logfile.txt". # ----------------------------------------------------------- # # All output from commands in this block sent to file $LOGFILE. echo -n "Logfile: " date echo "-------------------------------------" echo echo "Output of "ls -al" command" echo ls -al echo; echo echo "Output of "df" command" echo df # ----------------------------------------------------------- # exec 1>&6 6>&- # Restore stdout and close file descriptor #6. echo echo "== stdout now restored to default == " echo ls -al echo exit 0 Example 19-3. Redirecting both stdin and stdout in the same script with exec #!/bin/bash # upperconv.sh # Converts a specified input file to uppercase. E_FILE_ACCESS=70 E_WRONG_ARGS=71 Chapter 19. I/O Redirection 367
- 374. Advanced Bash-Scripting Guide if [ ! -r "$1" ] # Is specified input file readable? then echo "Can't read from input file!" echo "Usage: $0 input-file output-file" exit $E_FILE_ACCESS fi # Will exit with same error #+ even if input file ($1) not specified (why?). if [ -z "$2" ] then echo "Need to specify output file." echo "Usage: $0 input-file output-file" exit $E_WRONG_ARGS fi exec 4<&0 exec < $1 # Will read from input file. exec 7>&1 exec > $2 # Will write to output file. # Assumes output file writable (add check?). # ----------------------------------------------- cat - | tr a-z A-Z # Uppercase conversion. # ^^^^^ # Reads from stdin. # ^^^^^^^^^^ # Writes to stdout. # However, both stdin and stdout were redirected. # Note that the 'cat' can be omitted. # ----------------------------------------------- exec 1>&7 7>&- # Restore stout. exec 0<&4 4<&- # Restore stdin. # After restoration, the following line prints to stdout as expected. echo "File "$1" written to "$2" as uppercase conversion." exit 0 I/O redirection is a clever way of avoiding the dreaded inaccessible variables within a subshell problem. Example 19-4. Avoiding a subshell #!/bin/bash # avoid-subshell.sh # Suggested by Matthew Walker. Lines=0 echo cat myfile.txt | while read line; do { echo $line (( Lines++ )); # Incremented values of this variable #+ inaccessible outside loop. # Subshell problem. } done Chapter 19. I/O Redirection 368
- 375. Advanced Bash-Scripting Guide echo "Number of lines read = $Lines" # 0 # Wrong! echo "------------------------" exec 3<> myfile.txt while read line <&3 do { echo "$line" (( Lines++ )); # Incremented values of this variable #+ accessible outside loop. # No subshell, no problem. } done exec 3>&- echo "Number of lines read = $Lines" # 8 echo exit 0 # Lines below not seen by script. $ cat myfile.txt Line 1. Line 2. Line 3. Line 4. Line 5. Line 6. Line 7. Line 8. 19.2. Redirecting Code Blocks Blocks of code, such as while, until, and for loops, even if/then test blocks can also incorporate redirection of stdin. Even a function may use this form of redirection (see Example 23-11). The < operator at the end of the code block accomplishes this. Example 19-5. Redirected while loop #!/bin/bash # redir2.sh if [ -z "$1" ] then Filename=names.data # Default, if no filename specified. else Filename=$1 fi #+ Filename=${1:-names.data} # can replace the above test (parameter substitution). count=0 Chapter 19. I/O Redirection 369
- 376. Advanced Bash-Scripting Guide echo while [ "$name" != Smith ] # Why is variable $name in quotes? do read name # Reads from $Filename, rather than stdin. echo $name let "count += 1" done <"$Filename" # Redirects stdin to file $Filename. # ^^^^^^^^^^^^ echo; echo "$count names read"; echo exit 0 # Note that in some older shell scripting languages, #+ the redirected loop would run as a subshell. # Therefore, $count would return 0, the initialized value outside the loop. # Bash and ksh avoid starting a subshell *whenever possible*, #+ so that this script, for example, runs correctly. # (Thanks to Heiner Steven for pointing this out.) # However . . . # Bash *can* sometimes start a subshell in a PIPED "while-read" loop, #+ as distinct from a REDIRECTED "while" loop. abc=hi echo -e "1n2n3" | while read l do abc="$l" echo $abc done echo $abc # Thanks, Bruno de Oliveira Schneider, for demonstrating this #+ with the above snippet of code. # And, thanks, Brian Onn, for correcting an annotation error. Example 19-6. Alternate form of redirected while loop #!/bin/bash # This is an alternate form of the preceding script. # Suggested by Heiner Steven #+ as a workaround in those situations when a redirect loop #+ runs as a subshell, and therefore variables inside the loop # +do not keep their values upon loop termination. if [ -z "$1" ] then Filename=names.data # Default, if no filename specified. else Filename=$1 fi exec 3<&0 # Save stdin to file descriptor 3. exec 0<"$Filename" # Redirect standard input. count=0 echo Chapter 19. I/O Redirection 370
- 377. Advanced Bash-Scripting Guide while [ "$name" != Smith ] do read name # Reads from redirected stdin ($Filename). echo $name let "count += 1" done # Loop reads from file $Filename #+ because of line 20. # The original version of this script terminated the "while" loop with #+ done <"$Filename" # Exercise: # Why is this unnecessary? exec 0<&3 # Restore old stdin. exec 3<&- # Close temporary fd 3. echo; echo "$count names read"; echo exit 0 Example 19-7. Redirected until loop #!/bin/bash # Same as previous example, but with "until" loop. if [ -z "$1" ] then Filename=names.data # Default, if no filename specified. else Filename=$1 fi # while [ "$name" != Smith ] until [ "$name" = Smith ] # Change != to =. do read name # Reads from $Filename, rather than stdin. echo $name done <"$Filename" # Redirects stdin to file $Filename. # ^^^^^^^^^^^^ # Same results as with "while" loop in previous example. exit 0 Example 19-8. Redirected for loop #!/bin/bash if [ -z "$1" ] then Filename=names.data # Default, if no filename specified. else Filename=$1 fi line_count=`wc $Filename | awk '{ print $1 }'` # Number of lines in target file. Chapter 19. I/O Redirection 371
- 378. Advanced Bash-Scripting Guide # # Very contrived and kludgy, nevertheless shows that #+ it's possible to redirect stdin within a "for" loop... #+ if you're clever enough. # # More concise is line_count=$(wc -l < "$Filename") for name in `seq $line_count` # Recall that "seq" prints sequence of numbers. # while [ "$name" != Smith ] -- more complicated than a "while" loop -- do read name # Reads from $Filename, rather than stdin. echo $name if [ "$name" = Smith ] # Need all this extra baggage here. then break fi done <"$Filename" # Redirects stdin to file $Filename. # ^^^^^^^^^^^^ exit 0 We can modify the previous example to also redirect the output of the loop. Example 19-9. Redirected for loop (both stdin and stdout redirected) #!/bin/bash if [ -z "$1" ] then Filename=names.data # Default, if no filename specified. else Filename=$1 fi Savefile=$Filename.new # Filename to save results in. FinalName=Jonah # Name to terminate "read" on. line_count=`wc $Filename | awk '{ print $1 }'` # Number of lines in target file. for name in `seq $line_count` do read name echo "$name" if [ "$name" = "$FinalName" ] then break fi done < "$Filename" > "$Savefile" # Redirects stdin to file $Filename, # ^^^^^^^^^^^^^^^^^^^^^^^^^^^ and saves it to backup file. exit 0 Example 19-10. Redirected if/then test #!/bin/bash if [ -z "$1" ] then Chapter 19. I/O Redirection 372
- 379. Advanced Bash-Scripting Guide Filename=names.data # Default, if no filename specified. else Filename=$1 fi TRUE=1 if [ "$TRUE" ] # if true and if : also work. then read name echo $name fi <"$Filename" # ^^^^^^^^^^^^ # Reads only first line of file. # An "if/then" test has no way of iterating unless embedded in a loop. exit 0 Example 19-11. Data file names.data for above examples Aristotle Belisarius Capablanca Euler Goethe Hamurabi Jonah Laplace Maroczy Purcell Schmidt Semmelweiss Smith Turing Venn Wilkinson Znosko-Borowski # This is a data file for #+ "redir2.sh", "redir3.sh", "redir4.sh", "redir4a.sh", "redir5.sh". Redirecting the stdout of a code block has the effect of saving its output to a file. See Example 3-2. Here documents are a special case of redirected code blocks. That being the case, it should be possible to feed the output of a here document into the stdin for a while loop. # This example by Albert Siersema # Used with permission (thanks!). function doesOutput() # Could be an external command too, of course. # Here we show you can use a function as well. { ls -al *.jpg | awk '{print $5,$9}' } nr=0 # We want the while loop to be able to manipulate these and totalSize=0 #+ to be able to see the changes after the while finished. Chapter 19. I/O Redirection 373
- 380. Advanced Bash-Scripting Guide while read fileSize fileName ; do echo "$fileName is $fileSize bytes" let nr++ totalSize=$((totalSize+fileSize)) # Or: "let totalSize+=fileSize" done<<EOF $(doesOutput) EOF echo "$nr files totaling $totalSize bytes" 19.3. Applications Clever use of I/O redirection permits parsing and stitching together snippets of command output (see Example 14-7). This permits generating report and log files. Example 19-12. Logging events #!/bin/bash # logevents.sh # Author: Stephane Chazelas. # Used in ABS Guide with permission. # Event logging to a file. # Must be run as root (for write access in /var/log). ROOT_UID=0 # Only users with $UID 0 have root privileges. E_NOTROOT=67 # Non-root exit error. if [ "$UID" -ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi FD_DEBUG1=3 FD_DEBUG2=4 FD_DEBUG3=5 # === Uncomment one of the two lines below to activate script. === # LOG_EVENTS=1 # LOG_VARS=1 log() # Writes time and date to log file. { echo "$(date) $*" >&7 # This *appends* the date to the file. # ^^^^^^^ command substitution # See below. } case $LOG_LEVEL in 1) exec 3>&2 4> /dev/null 5> /dev/null;; 2) exec 3>&2 4>&2 5> /dev/null;; 3) exec 3>&2 4>&2 5>&2;; Chapter 19. I/O Redirection 374
- 381. Advanced Bash-Scripting Guide *) exec 3> /dev/null 4> /dev/null 5> /dev/null;; esac FD_LOGVARS=6 if [[ $LOG_VARS ]] then exec 6>> /var/log/vars.log else exec 6> /dev/null # Bury output. fi FD_LOGEVENTS=7 if [[ $LOG_EVENTS ]] then # exec 7 >(exec gawk '{print strftime(), $0}' >> /var/log/event.log) # Above line fails in versions of Bash more recent than 2.04. Why? exec 7>> /var/log/event.log # Append to "event.log". log # Write time and date. else exec 7> /dev/null # Bury output. fi echo "DEBUG3: beginning" >&${FD_DEBUG3} ls -l >&5 2>&4 # command1 >&5 2>&4 echo "Done" # command2 echo "sending mail" >&${FD_LOGEVENTS} # Writes "sending mail" to file descriptor #7. exit 0 Chapter 19. I/O Redirection 375
- 382. Chapter 20. Subshells Running a shell script launches a new process, a subshell. Definition: A subshell is a child process launched by a shell (or shell script). A subshell is a separate instance of the command processor -- the shell that gives you the prompt at the console or in an xterm window. Just as your commands are interpreted at the command-line prompt, similarly does a script batch-process a list of commands. Each shell script running is, in effect, a subprocess (child process) of the parent shell. A shell script can itself launch subprocesses. These subshells let the script do parallel processing, in effect executing multiple subtasks simultaneously. #!/bin/bash # subshell-test.sh ( # Inside parentheses, and therefore a subshell . . . while [ 1 ] # Endless loop. do echo "Subshell running . . ." done ) # Script will run forever, #+ or at least until terminated by a Ctl-C. exit $? # End of script (but will never get here). Now, run the script: sh subshell-test.sh And, while the script is running, from a different xterm: ps -ef | grep subshell-test.sh UID PID PPID C STIME TTY TIME CMD 500 2698 2502 0 14:26 pts/4 00:00:00 sh subshell-test.sh 500 2699 2698 21 14:26 pts/4 00:00:24 sh subshell-test.sh ^^^^ Analysis: PID 2698, the script, launched PID 2699, the subshell. Note: The "UID ..." line would be filtered out by the "grep" command, but is shown here for illustrative purposes. In general, an external command in a script forks off a subprocess, [96] whereas a Bash builtin does not. For this reason, builtins execute more quickly and use fewer system resources than their external command equivalents. Command List within Parentheses Chapter 20. Subshells 376
- 383. Advanced Bash-Scripting Guide ( command1; command2; command3; ... ) A command list embedded between parentheses runs as a subshell. Variables in a subshell are not visible outside the block of code in the subshell. They are not accessible to the parent process, to the shell that launched the subshell. These are, in effect, variables local to the child process. Example 20-1. Variable scope in a subshell #!/bin/bash # subshell.sh echo echo "We are outside the subshell." echo "Subshell level OUTSIDE subshell = $BASH_SUBSHELL" # Bash, version 3, adds the new $BASH_SUBSHELL variable. echo; echo outer_variable=Outer global_variable= # Define global variable for "storage" of #+ value of subshell variable. ( echo "We are inside the subshell." echo "Subshell level INSIDE subshell = $BASH_SUBSHELL" inner_variable=Inner echo "From inside subshell, "inner_variable" = $inner_variable" echo "From inside subshell, "outer" = $outer_variable" global_variable="$inner_variable" # Will this allow "exporting" #+ a subshell variable? ) echo; echo echo "We are outside the subshell." echo "Subshell level OUTSIDE subshell = $BASH_SUBSHELL" echo if [ -z "$inner_variable" ] then echo "inner_variable undefined in main body of shell" else echo "inner_variable defined in main body of shell" fi echo "From main body of shell, "inner_variable" = $inner_variable" # $inner_variable will show as blank (uninitialized) #+ because variables defined in a subshell are "local variables". # Is there a remedy for this? echo "global_variable = "$global_variable"" # Why doesn't this work? echo # ======================================================================= # Additionally ... Chapter 20. Subshells 377
- 384. Advanced Bash-Scripting Guide echo "-----------------"; echo var=41 # Global variable. ( let "var+=1"; echo "$var INSIDE subshell = $var" ) # 42 echo "$var OUTSIDE subshell = $var" # 41 # Variable operations inside a subshell, even to a GLOBAL variable #+ do not affect the value of the variable outside the subshell! exit 0 # Question: # -------- # Once having exited a subshell, #+ is there any way to reenter that very same subshell #+ to modify or access the subshell variables? See also $BASHPID and Example 31-2. Definition: The scope of a variable is the context in which it has meaning, in which it has a value that can be referenced. For example, the scope of a local variable lies only within the function, block of code, or subshell within which it is defined, while the scope of a global variable is the entire script in which it appears. While the $BASH_SUBSHELL internal variable indicates the nesting level of a subshell, the $SHLVL variable shows no change within a subshell. echo " $BASH_SUBSHELL outside subshell = $BASH_SUBSHELL" # 0 ( echo " $BASH_SUBSHELL inside subshell = $BASH_SUBSHELL" ) # 1 ( ( echo " $BASH_SUBSHELL inside nested subshell = $BASH_SUBSHELL" ) ) # 2 # ^ ^ *** nested *** ^ ^ echo echo " $SHLVL outside subshell = $SHLVL" # 3 ( echo " $SHLVL inside subshell = $SHLVL" ) # 3 (No change!) Directory changes made in a subshell do not carry over to the parent shell. Example 20-2. List User Profiles #!/bin/bash # allprofs.sh: Print all user profiles. # This script written by Heiner Steven, and modified by the document author. FILE=.bashrc # File containing user profile, #+ was ".profile" in original script. for home in `awk -F: '{print $6}' /etc/passwd` do [ -d "$home" ] || continue # If no home directory, go to next. [ -r "$home" ] || continue # If not readable, go to next. (cd $home; [ -e $FILE ] && less $FILE) Chapter 20. Subshells 378
- 385. Advanced Bash-Scripting Guide done # When script terminates, there is no need to 'cd' back to original directory, #+ because 'cd $home' takes place in a subshell. exit 0 A subshell may be used to set up a "dedicated environment" for a command group. COMMAND1 COMMAND2 COMMAND3 ( IFS=: PATH=/bin unset TERMINFO set -C shift 5 COMMAND4 COMMAND5 exit 3 # Only exits the subshell! ) # The parent shell has not been affected, and the environment is preserved. COMMAND6 COMMAND7 As seen here, the exit command only terminates the subshell in which it is running, not the parent shell or script. One application of such a "dedicated environment" is testing whether a variable is defined. if (set -u; : $variable) 2> /dev/null then echo "Variable is set." fi # Variable has been set in current script, #+ or is an an internal Bash variable, #+ or is present in environment (has been exported). # Could also be written [[ ${variable-x} != x || ${variable-y} != y ]] # or [[ ${variable-x} != x$variable ]] # or [[ ${variable+x} = x ]] # or [[ ${variable-x} != x ]] Another application is checking for a lock file: if (set -C; : > lock_file) 2> /dev/null then : # lock_file didn't exist: no user running the script else echo "Another user is already running that script." exit 65 fi # Code snippet by Stéphane Chazelas, #+ with modifications by Paulo Marcel Coelho Aragao. + Processes may execute in parallel within different subshells. This permits breaking a complex task into subcomponents processed concurrently. Chapter 20. Subshells 379
- 386. Advanced Bash-Scripting Guide Example 20-3. Running parallel processes in subshells (cat list1 list2 list3 | sort | uniq > list123) & (cat list4 list5 list6 | sort | uniq > list456) & # Merges and sorts both sets of lists simultaneously. # Running in background ensures parallel execution. # # Same effect as # cat list1 list2 list3 | sort | uniq > list123 & # cat list4 list5 list6 | sort | uniq > list456 & wait # Don't execute the next command until subshells finish. diff list123 list456 Redirecting I/O to a subshell uses the "|" pipe operator, as in ls -al | (command). A code block between curly brackets does not launch a subshell. { command1; command2; command3; . . . commandN; } var1=23 echo "$var1" # 23 { var1=76; } echo "$var1" # 76 Chapter 20. Subshells 380
- 387. Chapter 21. Restricted Shells Disabled commands in restricted shells . Running a script or portion of a script in restricted mode disables certain commands that would otherwise be available. This is a security measure intended to limit the privileges of the script user and to minimize possible damage from running the script. The following commands and actions are disabled: • Using cd to change the working directory. • Changing the values of the $PATH, $SHELL, $BASH_ENV, or $ENV environmental variables. • Reading or changing the $SHELLOPTS, shell environmental options. • Output redirection. • Invoking commands containing one or more /'s. • Invoking exec to substitute a different process for the shell. • Various other commands that would enable monkeying with or attempting to subvert the script for an unintended purpose. • Getting out of restricted mode within the script. Example 21-1. Running a script in restricted mode #!/bin/bash # Starting the script with "#!/bin/bash -r" #+ runs entire script in restricted mode. echo echo "Changing directory." cd /usr/local echo "Now in `pwd`" echo "Coming back home." cd echo "Now in `pwd`" echo # Everything up to here in normal, unrestricted mode. set -r # set --restricted has same effect. echo "==> Now in restricted mode. <==" echo echo echo "Attempting directory change in restricted mode." cd .. echo "Still in `pwd`" echo echo echo "$SHELL = $SHELL" echo "Attempting to change shell in restricted mode." Chapter 21. Restricted Shells 381
- 388. Advanced Bash-Scripting Guide SHELL="/bin/ash" echo echo "$SHELL= $SHELL" echo echo echo "Attempting to redirect output in restricted mode." ls -l /usr/bin > bin.files ls -l bin.files # Try to list attempted file creation effort. echo exit 0 Chapter 21. Restricted Shells 382
- 389. Chapter 22. Process Substitution Piping the stdout of a command into the stdin of another is a powerful technique. But, what if you need to pipe the stdout of multiple commands? This is where process substitution comes in. Process substitution feeds the output of a process (or processes) into the stdin of another process. Template Command list enclosed within parentheses >(command_list) <(command_list) Process substitution uses /dev/fd/<n> files to send the results of the process(es) within parentheses to another process. [97] There is no space between the the "<" or ">" and the parentheses. Space there would give an error message. bash$ echo >(true) /dev/fd/63 bash$ echo <(true) /dev/fd/63 bash$ echo >(true) <(true) /dev/fd/63 /dev/fd/62 bash$ wc <(cat /usr/share/dict/linux.words) 483523 483523 4992010 /dev/fd/63 bash$ grep script /usr/share/dict/linux.words | wc 262 262 3601 bash$ wc <(grep script /usr/share/dict/linux.words) 262 262 3601 /dev/fd/63 Bash creates a pipe with two file descriptors, --fIn and fOut--. The stdin of true connects to fOut (dup2(fOut, 0)), then Bash passes a /dev/fd/fIn argument to echo. On systems lacking /dev/fd/<n> files, Bash may use temporary files. (Thanks, S.C.) Process substitution can compare the output of two different commands, or even the output of different options to the same command. bash$ comm <(ls -l) <(ls -al) total 12 -rw-rw-r-- 1 bozo bozo 78 Mar 10 12:58 File0 -rw-rw-r-- 1 bozo bozo 42 Mar 10 12:58 File2 -rw-rw-r-- 1 bozo bozo 103 Mar 10 12:58 t2.sh total 20 drwxrwxrwx 2 bozo bozo 4096 Mar 10 18:10 . Chapter 22. Process Substitution 383
- 390. Advanced Bash-Scripting Guide drwx------ 72 bozo bozo 4096 Mar 10 17:58 .. -rw-rw-r-- 1 bozo bozo 78 Mar 10 12:58 File0 -rw-rw-r-- 1 bozo bozo 42 Mar 10 12:58 File2 -rw-rw-r-- 1 bozo bozo 103 Mar 10 12:58 t2.sh Process substitution can compare the contents of two directories -- to see which filenames are in one, but not the other. diff <(ls $first_directory) <(ls $second_directory) Some other usages and uses of process substitution: read -a list < <( od -Ad -w24 -t u2 /dev/urandom ) # Read a list of random numbers from /dev/urandom, #+ process with "od" #+ and feed into stdin of "read" . . . # From "insertion-sort.bash" example script. # Courtesy of JuanJo Ciarlante. cat <(ls -l) # Same as ls -l | cat sort -k 9 <(ls -l /bin) <(ls -l /usr/bin) <(ls -l /usr/X11R6/bin) # Lists all the files in the 3 main 'bin' directories, and sorts by filename. # Note that three (count 'em) distinct commands are fed to 'sort'. diff <(command1) <(command2) # Gives difference in command output. tar cf >(bzip2 -c > file.tar.bz2) $directory_name # Calls "tar cf /dev/fd/?? $directory_name", and "bzip2 -c > file.tar.bz2". # # Because of the /dev/fd/<n> system feature, # the pipe between both commands does not need to be named. # # This can be emulated. # bzip2 -c < pipe > file.tar.bz2& tar cf pipe $directory_name rm pipe # or exec 3>&1 tar cf /dev/fd/4 $directory_name 4>&1 >&3 3>&- | bzip2 -c > file.tar.bz2 3>&- exec 3>&- # Thanks, Stéphane Chazelas Here is a method of circumventing the problem of an echo piped to a while-read loop running in a subshell. Example 22-1. Code block redirection without forking #!/bin/bash # wr-ps.bash: while-read loop with process substitution. # This example contributed by Tomas Pospisek. # (Heavily edited by the ABS Guide author.) Chapter 22. Process Substitution 384
- 391. Advanced Bash-Scripting Guide echo echo "random input" | while read i do global=3D": Not available outside the loop." # ... because it runs in a subshell. done echo "$global (from outside the subprocess) = $global" # $global (from outside the subprocess) = echo; echo "--"; echo while read i do echo $i global=3D": Available outside the loop." # ... because it does *not* run in a subshell. done < <( echo "random input" ) # ^ ^ echo "$global (using process substitution) = $global" # Random input # $global (using process substitution) = 3D: Available outside the loop. echo; echo "##########"; echo # And likewise . . . declare -a inloop index=0 cat $0 | while read line do inloop[$index]="$line" ((index++)) # It runs in a subshell, so ... done echo "OUTPUT = " echo ${inloop[*]} # ... nothing echoes. echo; echo "--"; echo declare -a outloop index=0 while read line do outloop[$index]="$line" ((index++)) # It does *not* run in a subshell, so ... done < <( cat $0 ) echo "OUTPUT = " echo ${outloop[*]} # ... the entire script echoes. exit $? A reader sent in the following interesting example of process substitution. Chapter 22. Process Substitution 385
- 392. Advanced Bash-Scripting Guide # Script fragment taken from SuSE distribution: # --------------------------------------------------------------# while read des what mask iface; do # Some commands ... done < <(route -n) # ^ ^ First < is redirection, second is process substitution. # To test it, let's make it do something. while read des what mask iface; do echo $des $what $mask $iface done < <(route -n) # Output: # Kernel IP routing table # Destination Gateway Genmask Flags Metric Ref Use Iface # 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo # --------------------------------------------------------------# # As Stéphane Chazelas points out, #+ an easier-to-understand equivalent is: route -n | while read des what mask iface; do # Variables set from output of pipe. echo $des $what $mask $iface done # This yields the same output as above. # However, as Ulrich Gayer points out . . . #+ this simplified equivalent uses a subshell for the while loop, #+ and therefore the variables disappear when the pipe terminates. # --------------------------------------------------------------# # However, Filip Moritz comments that there is a subtle difference #+ between the above two examples, as the following shows. ( route -n | while read x; do ((y++)); done echo $y # $y is still unset while read x; do ((y++)); done < <(route -n) echo $y # $y has the number of lines of output of route -n ) More generally spoken ( : | x=x # seems to start a subshell like : | ( x=x ) # while x=x < <(:) # does not ) # This is useful, when parsing csv and the like. # That is, in effect, what the original SuSE code fragment does. Chapter 22. Process Substitution 386
- 393. Chapter 23. Functions Like "real" programming languages, Bash has functions, though in a somewhat limited implementation. A function is a subroutine, a code block that implements a set of operations, a "black box" that performs a specified task. Wherever there is repetitive code, when a task repeats with only slight variations in procedure, then consider using a function. function function_name { command... } or function_name () { command... } This second form will cheer the hearts of C programmers (and is more portable). As in C, the function's opening bracket may optionally appear on the second line. function_name () { command... } A function may be "compacted" into a single line. fun () { echo "This is a function"; echo; } # ^ ^ In this case, however, a semicolon must follow the final command in the function. fun () { echo "This is a function"; echo } # Error! # ^ Functions are called, triggered, simply by invoking their names. A function call is equivalent to a command. Example 23-1. Simple functions #!/bin/bash JUST_A_SECOND=1 funky () { # This is about as simple as functions get. echo "This is a funky function." echo "Now exiting funky function." } # Function declaration must precede call. fun () Chapter 23. Functions 387
- 394. Advanced Bash-Scripting Guide { # A somewhat more complex function. i=0 REPEATS=30 echo echo "And now the fun really begins." echo sleep $JUST_A_SECOND # Hey, wait a second! while [ $i -lt $REPEATS ] do echo "----------FUNCTIONS---------->" echo "<------------ARE-------------" echo "<------------FUN------------>" echo let "i+=1" done } # Now, call the functions. funky fun exit 0 The function definition must precede the first call to it. There is no method of "declaring" the function, as, for example, in C. f1 # Will give an error message, since function "f1" not yet defined. declare -f f1 # This doesn't help either. f1 # Still an error message. # However... f1 () { echo "Calling function "f2" from within function "f1"." f2 } f2 () { echo "Function "f2"." } f1 # Function "f2" is not actually called until this point, #+ although it is referenced before its definition. # This is permissible. # Thanks, S.C. Functions may not be empty! #!/bin/bash # empty-function.sh Chapter 23. Functions 388
- 395. Advanced Bash-Scripting Guide empty () { } exit 0 # Will not exit here! # $ sh empty-function.sh # empty-function.sh: line 6: syntax error near unexpected token `}' # empty-function.sh: line 6: `}' # $ echo $? # 2 # However ... not_quite_empty () { illegal_command } # A script containing this function will *not* bomb #+ as long as the function is not called. # Thank you, Thiemo Kellner, for pointing this out. It is even possible to nest a function within another function, although this is not very useful. f1 () { f2 () # nested { echo "Function "f2", inside "f1"." } } f2 # Gives an error message. # Even a preceding "declare -f f2" wouldn't help. echo f1 # Does nothing, since calling "f1" does not automatically call "f2". f2 # Now, it's all right to call "f2", #+ since its definition has been made visible by calling "f1". # Thanks, S.C. Function declarations can appear in unlikely places, even where a command would otherwise go. ls -l | foo() { echo "foo"; } # Permissible, but useless. if [ "$USER" = bozo ] then bozo_greet () # Function definition embedded in an if/then construct. { echo "Hello, Bozo." } fi Chapter 23. Functions 389
- 396. Advanced Bash-Scripting Guide bozo_greet # Works only for Bozo, and other users get an error. # Something like this might be useful in some contexts. NO_EXIT=1 # Will enable function definition below. [[ $NO_EXIT -eq 1 ]] && exit() { true; } # Function definition in an "and-list". # If $NO_EXIT is 1, declares "exit ()". # This disables the "exit" builtin by aliasing it to "true". exit # Invokes "exit ()" function, not "exit" builtin. # Or, similarly: filename=file1 [ -f "$filename" ] && foo () { rm -f "$filename"; echo "File "$filename" deleted."; } || foo () { echo "File "$filename" not found."; touch bar; } foo # Thanks, S.C. and Christopher Head Functions can take strange forms. _(){ for i in {1..10}; do echo -n "$FUNCNAME"; done; echo; } # ^^^ No space between function name and parentheses. # This doesn't always work. Why not? # Now, let's invoke the function. _ # __________ # ^^^^^^^^^^ 10 underscores (10 x function name)! # A "naked" underscore is an acceptable function name. What happens when different versions of the same function appear in a script? # As Yan Chen points out, # when a function is defined multiple times, # the final version is what is invoked. # This is not, however, particularly useful. func () { echo "First version of func ()." } func () { echo "Second version of func ()." } func # Second version of func (). exit $? # It is even possible to use functions to override #+ or preempt system commands. Chapter 23. Functions 390
- 397. Advanced Bash-Scripting Guide # Of course, this is *not* advisable. 23.1. Complex Functions and Function Complexities Functions may process arguments passed to them and return an exit status to the script for further processing. function_name $arg1 $arg2 The function refers to the passed arguments by position (as if they were positional parameters), that is, $1, $2, and so forth. Example 23-2. Function Taking Parameters #!/bin/bash # Functions and parameters DEFAULT=default # Default param value. func2 () { if [ -z "$1" ] # Is parameter #1 zero length? then echo "-Parameter #1 is zero length.-" # Or no parameter passed. else echo "-Param #1 is "$1".-" fi variable=${1-$DEFAULT} # What does echo "variable = $variable" #+ parameter substitution show? # --------------------------- # It distinguishes between #+ no param and a null param. if [ "$2" ] then echo "-Parameter #2 is "$2".-" fi return 0 } echo echo "Nothing passed." func2 # Called with no params echo echo "Zero-length parameter passed." func2 "" # Called with zero-length param echo echo "Null parameter passed." func2 "$uninitialized_param" # Called with uninitialized param echo echo "One parameter passed." func2 first # Called with one param Chapter 23. Functions 391
- 398. Advanced Bash-Scripting Guide echo echo "Two parameters passed." func2 first second # Called with two params echo echo """ "second" passed." func2 "" second # Called with zero-length first parameter echo # and ASCII string as a second one. exit 0 The shift command works on arguments passed to functions (see Example 33-16). But, what about command-line arguments passed to the script? Does a function see them? Well, let's clear up the confusion. Example 23-3. Functions and command-line args passed to the script #!/bin/bash # func-cmdlinearg.sh # Call this script with a command-line argument, #+ something like $0 arg1. func () { echo "$1" } echo "First call to function: no arg passed." echo "See if command-line arg is seen." func # No! Command-line arg not seen. echo "============================================================" echo echo "Second call to function: command-line arg passed explicitly." func $1 # Now it's seen! exit 0 In contrast to certain other programming languages, shell scripts normally pass only value parameters to functions. Variable names (which are actually pointers), if passed as parameters to functions, will be treated as string literals. Functions interpret their arguments literally. Indirect variable references (see Example 34-2) provide a clumsy sort of mechanism for passing variable pointers to functions. Example 23-4. Passing an indirect reference to a function #!/bin/bash # ind-func.sh: Passing an indirect reference to a function. Chapter 23. Functions 392
- 399. Advanced Bash-Scripting Guide echo_var () { echo "$1" } message=Hello Hello=Goodbye echo_var "$message" # Hello # Now, let's pass an indirect reference to the function. echo_var "${!message}" # Goodbye echo "-------------" # What happens if we change the contents of "hello" variable? Hello="Hello, again!" echo_var "$message" # Hello echo_var "${!message}" # Hello, again! exit 0 The next logical question is whether parameters can be dereferenced after being passed to a function. Example 23-5. Dereferencing a parameter passed to a function #!/bin/bash # dereference.sh # Dereferencing parameter passed to a function. # Script by Bruce W. Clare. dereference () { y=$"$1" # Name of variable. echo $y # $Junk x=`eval "expr "$y" "` echo $1=$x eval "$1="Some Different Text "" # Assign new value. } Junk="Some Text" echo $Junk "before" # Some Text before dereference Junk echo $Junk "after" # Some Different Text after exit 0 Example 23-6. Again, dereferencing a parameter passed to a function #!/bin/bash # ref-params.sh: Dereferencing a parameter passed to a function. # (Complex Example) ITERATIONS=3 # How many times to get input. icount=1 my_read () { # Called with my_read varname, #+ outputs the previous value between brackets as the default value, Chapter 23. Functions 393
- 400. Advanced Bash-Scripting Guide #+ then asks for a new value. local local_var echo -n "Enter a value " eval 'echo -n "[$'$1'] "' # Previous value. # eval echo -n "[$$1] " # Easier to understand, #+ but loses trailing space in user prompt. read local_var [ -n "$local_var" ] && eval $1=$local_var # "And-list": if "local_var" then set "$1" to its value. } echo while [ "$icount" -le "$ITERATIONS" ] do my_read var echo "Entry #$icount = $var" let "icount += 1" echo done # Thanks to Stephane Chazelas for providing this instructive example. exit 0 Exit and Return exit status Functions return a value, called an exit status. This is analogous to the exit status returned by a command. The exit status may be explicitly specified by a return statement, otherwise it is the exit status of the last command in the function (0 if successful, and a non-zero error code if not). This exit status may be used in the script by referencing it as $?. This mechanism effectively permits script functions to have a "return value" similar to C functions. return Terminates a function. A return command [98] optionally takes an integer argument, which is returned to the calling script as the "exit status" of the function, and this exit status is assigned to the variable $?. Example 23-7. Maximum of two numbers #!/bin/bash # max.sh: Maximum of two integers. E_PARAM_ERR=250 # If less than 2 params passed to function. EQUAL=251 # Return value if both params equal. # Error values out of range of any #+ params that might be fed to the function. max2 () # Returns larger of two numbers. { # Note: numbers compared must be less than 257. if [ -z "$2" ] then Chapter 23. Functions 394
- 401. Advanced Bash-Scripting Guide return $E_PARAM_ERR fi if [ "$1" -eq "$2" ] then return $EQUAL else if [ "$1" -gt "$2" ] then return $1 else return $2 fi fi } max2 33 34 return_val=$? if [ "$return_val" -eq $E_PARAM_ERR ] then echo "Need to pass two parameters to the function." elif [ "$return_val" -eq $EQUAL ] then echo "The two numbers are equal." else echo "The larger of the two numbers is $return_val." fi exit 0 # Exercise (easy): # --------------- # Convert this to an interactive script, #+ that is, have the script ask for input (two numbers). For a function to return a string or array, use a dedicated variable. count_lines_in_etc_passwd() { [[ -r /etc/passwd ]] && REPLY=$(echo $(wc -l < /etc/passwd)) # If /etc/passwd is readable, set REPLY to line count. # Returns both a parameter value and status information. # The 'echo' seems unnecessary, but . . . #+ it removes excess whitespace from the output. } if count_lines_in_etc_passwd then echo "There are $REPLY lines in /etc/passwd." else echo "Cannot count lines in /etc/passwd." fi # Thanks, S.C. Example 23-8. Converting numbers to Roman numerals Chapter 23. Functions 395
- 402. Advanced Bash-Scripting Guide #!/bin/bash # Arabic number to Roman numeral conversion # Range: 0 - 200 # It's crude, but it works. # Extending the range and otherwise improving the script is left as an exercise. # Usage: roman number-to-convert LIMIT=200 E_ARG_ERR=65 E_OUT_OF_RANGE=66 if [ -z "$1" ] then echo "Usage: `basename $0` number-to-convert" exit $E_ARG_ERR fi num=$1 if [ "$num" -gt $LIMIT ] then echo "Out of range!" exit $E_OUT_OF_RANGE fi to_roman () # Must declare function before first call to it. { number=$1 factor=$2 rchar=$3 let "remainder = number - factor" while [ "$remainder" -ge 0 ] do echo -n $rchar let "number -= factor" let "remainder = number - factor" done return $number # Exercises: # --------- # 1) Explain how this function works. # Hint: division by successive subtraction. # 2) Extend to range of the function. # Hint: use "echo" and command-substitution capture. } to_roman $num 100 C num=$? to_roman $num 90 LXXXX num=$? to_roman $num 50 L num=$? to_roman $num 40 XL num=$? to_roman $num 10 X num=$? to_roman $num 9 IX num=$? Chapter 23. Functions 396
- 403. Advanced Bash-Scripting Guide to_roman $num 5 V num=$? to_roman $num 4 IV num=$? to_roman $num 1 I # Successive calls to conversion function! # Is this really necessary??? Can it be simplified? echo exit See also Example 10-28. The largest positive integer a function can return is 255. The return command is closely tied to the concept of exit status, which accounts for this particular limitation. Fortunately, there are various workarounds for those situations requiring a large integer return value from a function. Example 23-9. Testing large return values in a function #!/bin/bash # return-test.sh # The largest positive value a function can return is 255. return_test () # Returns whatever passed to it. { return $1 } return_test 27 # o.k. echo $? # Returns 27. return_test 255 # Still o.k. echo $? # Returns 255. return_test 257 # Error! echo $? # Returns 1 (return code for miscellaneous error). # ====================================================== return_test -151896 # Do large negative numbers work? echo $? # Will this return -151896? # No! It returns 168. # Version of Bash before 2.05b permitted #+ large negative integer return values. # Newer versions of Bash plug this loophole. # This may break older scripts. # Caution! # ====================================================== exit 0 A workaround for obtaining large integer "return values" is to simply assign the "return value" to a global variable. Return_Val= # Global variable to hold oversize return value of function. alt_return_test () Chapter 23. Functions 397
- 404. Advanced Bash-Scripting Guide { fvar=$1 Return_Val=$fvar return # Returns 0 (success). } alt_return_test 1 echo $? # 0 echo "return value = $Return_Val" # 1 alt_return_test 256 echo "return value = $Return_Val" # 256 alt_return_test 257 echo "return value = $Return_Val" # 257 alt_return_test 25701 echo "return value = $Return_Val" #25701 A more elegant method is to have the function echo its "return value to stdout," and then capture it by command substitution. See the discussion of this in Section 33.8. Example 23-10. Comparing two large integers #!/bin/bash # max2.sh: Maximum of two LARGE integers. # This is the previous "max.sh" example, #+ modified to permit comparing large integers. EQUAL=0 # Return value if both params equal. E_PARAM_ERR=-99999 # Not enough params passed to function. # ^^^^^^ Out of range of any params that might be passed. max2 () # "Returns" larger of two numbers. { if [ -z "$2" ] then echo $E_PARAM_ERR return fi if [ "$1" -eq "$2" ] then echo $EQUAL return else if [ "$1" -gt "$2" ] then retval=$1 else retval=$2 fi fi echo $retval # Echoes (to stdout), rather than returning value. # Why? } Chapter 23. Functions 398
- 405. Advanced Bash-Scripting Guide return_val=$(max2 33001 33997) # ^^^^ Function name # ^^^^^ ^^^^^ Params passed # This is actually a form of command substitution: #+ treating a function as if it were a command, #+ and assigning the stdout of the function to the variable "return_val." # ========================= OUTPUT ======================== if [ "$return_val" -eq "$E_PARAM_ERR" ] then echo "Error in parameters passed to comparison function!" elif [ "$return_val" -eq "$EQUAL" ] then echo "The two numbers are equal." else echo "The larger of the two numbers is $return_val." fi # ========================================================= exit 0 # Exercises: # --------- # 1) Find a more elegant way of testing #+ the parameters passed to the function. # 2) Simplify the if/then structure at "OUTPUT." # 3) Rewrite the script to take input from command-line parameters. Here is another example of capturing a function "return value." Understanding it requires some knowledge of awk. month_length () # Takes month number as an argument. { # Returns number of days in month. monthD="31 28 31 30 31 30 31 31 30 31 30 31" # Declare as local? echo "$monthD" | awk '{ print $'"${1}"' }' # Tricky. # ^^^^^^^^^ # Parameter passed to function ($1 -- month number), then to awk. # Awk sees this as "print $1 . . . print $12" (depending on month number) # Template for passing a parameter to embedded awk script: # $'"${script_parameter}"' # Needs error checking for correct parameter range (1-12) #+ and for February in leap year. } # ---------------------------------------------- # Usage example: month=4 # April, for example (4th month). days_in=$(month_length $month) echo $days_in # 30 # ---------------------------------------------- See also Example A-7 and Example A-37. Exercise: Using what we have just learned, extend the previous Roman numerals example to accept arbitrarily large input. Redirection Chapter 23. Functions 399
- 406. Advanced Bash-Scripting Guide Redirecting the stdin of a function A function is essentially a code block, which means its stdin can be redirected (as in Example 3-1). Example 23-11. Real name from username #!/bin/bash # realname.sh # # From username, gets "real name" from /etc/passwd. ARGCOUNT=1 # Expect one arg. E_WRONGARGS=65 file=/etc/passwd pattern=$1 if [ $# -ne "$ARGCOUNT" ] then echo "Usage: `basename $0` USERNAME" exit $E_WRONGARGS fi file_excerpt () # Scan file for pattern, { #+ then print relevant portion of line. while read line # "while" does not necessarily need [ condition ] do echo "$line" | grep $1 | awk -F":" '{ print $5 }' # Have awk use ":" delimiter. done } <$file # Redirect into function's stdin. file_excerpt $pattern # Yes, this entire script could be reduced to # grep PATTERN /etc/passwd | awk -F":" '{ print $5 }' # or # awk -F: '/PATTERN/ {print $5}' # or # awk -F: '($1 == "username") { print $5 }' # real name from username # However, it might not be as instructive. exit 0 There is an alternate, and perhaps less confusing method of redirecting a function's stdin. This involves redirecting the stdin to an embedded bracketed code block within the function. # Instead of: Function () { ... } < file # Try this: Function () { { ... } < file } Chapter 23. Functions 400
- 407. Advanced Bash-Scripting Guide # Similarly, Function () # This works. { { echo $* } | tr a b } Function () # This doesn't work. { echo $* } | tr a b # A nested code block is mandatory here. # Thanks, S.C. Emmanuel Rouat's sample bashrc file contains some instructive examples of functions. 23.2. Local Variables What makes a variable local? local variables A variable declared as local is one that is visible only within the block of code in which it appears. It has local scope. In a function, a local variable has meaning only within that function block. Example 23-12. Local variable visibility #!/bin/bash # Global and local variables inside a function. func () { local loc_var=23 # Declared as local variable. echo # Uses the 'local' builtin. echo ""loc_var" in function = $loc_var" global_var=999 # Not declared as local. # Defaults to global. echo ""global_var" in function = $global_var" } func # Now, to see if local variable "loc_var" exists outside function. echo echo ""loc_var" outside function = $loc_var" # $loc_var outside function = # No, $loc_var not visible globally. echo ""global_var" outside function = $global_var" # $global_var outside function = 999 # $global_var is visible globally. echo Chapter 23. Functions 401
- 408. Advanced Bash-Scripting Guide exit 0 # In contrast to C, a Bash variable declared inside a function #+ is local *only* if declared as such. Before a function is called, all variables declared within the function are invisible outside the body of the function, not just those explicitly declared as local. #!/bin/bash func () { global_var=37 # Visible only within the function block #+ before the function has been called. } # END OF FUNCTION echo "global_var = $global_var" # global_var = # Function "func" has not yet been called, #+ so $global_var is not visible here. func echo "global_var = $global_var" # global_var = 37 # Has been set by function call. 23.2.1. Local variables and recursion. Recursion is an interesting and sometimes useful form of self-reference. Herbert Mayer defines it as ". . . expressing an algorithm by using a simpler version of that same algorithm . . ." Consider a definition defined in terms of itself, [99] an expression implicit in its own expression, [100] a snake swallowing its own tail, [101] or . . . a function that calls itself. [102] Example 23-13. Demonstration of a simple recursive function #!/bin/bash # recursion-demo.sh # Demonstration of recursion. RECURSIONS=9 # How many times to recurse. r_count=0 # Must be global. Why? recurse () { var="$1" while [ "$var" -ge 0 ] do echo "Recursion count = "$r_count" +-+ $var = "$var"" (( var-- )); (( r_count++ )) recurse "$var" # Function calls itself (recurses) Chapter 23. Functions 402
- 409. Advanced Bash-Scripting Guide done #+ until what condition is met? } recurse $RECURSIONS exit $? Example 23-14. Another simple demonstration #!/bin/bash # recursion-def.sh # A script that defines "recursion" in a rather graphic way. RECURSIONS=10 r_count=0 sp=" " define_recursion () { ((r_count++)) sp="$sp"" " echo -n "$sp" echo ""The act of recurring ... "" # Per 1913 Webster's dictionary. while [ $r_count -le $RECURSIONS ] do define_recursion done } echo echo "Recursion: " define_recursion echo exit $? Local variables are a useful tool for writing recursive code, but this practice generally involves a great deal of computational overhead and is definitely not recommended in a shell script. [103] Example 23-15. Recursion, using a local variable #!/bin/bash # factorial # --------- # Does bash permit recursion? # Well, yes, but... # It's so slow that you gotta have rocks in your head to try it. MAX_ARG=5 E_WRONG_ARGS=85 E_RANGE_ERR=86 Chapter 23. Functions 403
- 410. Advanced Bash-Scripting Guide if [ -z "$1" ] then echo "Usage: `basename $0` number" exit $E_WRONG_ARGS fi if [ "$1" -gt $MAX_ARG ] then echo "Out of range ($MAX_ARG is maximum)." # Let's get real now. # If you want greater range than this, #+ rewrite it in a Real Programming Language. exit $E_RANGE_ERR fi fact () { local number=$1 # Variable "number" must be declared as local, #+ otherwise this doesn't work. if [ "$number" -eq 0 ] then factorial=1 # Factorial of 0 = 1. else let "decrnum = number - 1" fact $decrnum # Recursive function call (the function calls itself). let "factorial = $number * $?" fi return $factorial } fact $1 echo "Factorial of $1 is $?." exit 0 Also see Example A-15 for an example of recursion in a script. Be aware that recursion is resource-intensive and executes slowly, and is therefore generally not appropriate in a script. 23.3. Recursion Without Local Variables A function may recursively call itself even without use of local variables. Example 23-16. The Fibonacci Sequence #!/bin/bash # fibo.sh : Fibonacci sequence (recursive) # Author: M. Cooper # License: GPL3 # --------------------------------- # Fibo(0) = 0 # Fibo(1) = 1 # else Chapter 23. Functions 404
- 411. Advanced Bash-Scripting Guide # Fibo(j) = Fibo(j-1) + Fibo(j-2) # --------------------------------- MAXTERM=15 # Number of terms (+1) to generate. MINIDX=2 # If idx is less than 2, then Fibo(idx) = idx. Fibonacci () { idx=$1 # Doesn't need to be local. Why not? if [ "$idx" -lt "$MINIDX" ] then echo "$idx" # First two terms are 0 1 ... see above. else (( --idx )) # j-1 term1=$( Fibonacci $idx ) # Fibo(j-1) (( --idx )) # j-2 term2=$( Fibonacci $idx ) # Fibo(j-2) echo $(( term1 + term2 )) fi # An ugly, ugly kludge. # The more elegant implementation of recursive fibo in C #+ is a straightforward translation of the algorithm in lines 7 - 10. } for i in $(seq 0 $MAXTERM) do # Calculate $MAXTERM+1 terms. FIBO=$(Fibonacci $i) echo -n "$FIBO " done # 0 1 1 2 3 5 8 13 21 34 55 89 144 233 377 610 # Takes a while, doesn't it? Recursion in a script is slow. echo exit 0 Example 23-17. The Towers of Hanoi #! /bin/bash # # The Towers Of Hanoi # Bash script # Copyright (C) 2000 Amit Singh. All Rights Reserved. # http://hanoi.kernelthread.com # # Tested under Bash version 2.05b.0(13)-release. # Also works under Bash version 3.x. # # Used in "Advanced Bash Scripting Guide" #+ with permission of script author. # Slightly modified and commented by ABS author. #=================================================================# # The Tower of Hanoi is a mathematical puzzle attributed to #+ Edouard Lucas, a nineteenth-century French mathematician. # # There are three vertical posts set in a base. # The first post has a set of annular rings stacked on it. Chapter 23. Functions 405
- 412. Advanced Bash-Scripting Guide # These rings are disks with a hole drilled out of the center, #+ so they can slip over the posts and rest flat. # The rings have different diameters, and they stack in ascending #+ order, according to size. # The smallest ring is on top, and the largest on the bottom. # # The task is to transfer the stack of rings #+ to one of the other posts. # You can move only one ring at a time to another post. # You are permitted to move rings back to the original post. # You may place a smaller ring atop a larger one, #+ but *not* vice versa. # Again, it is forbidden to place a larger ring atop a smaller one. # # For a small number of rings, only a few moves are required. #+ For each additional ring, #+ the required number of moves approximately doubles, #+ and the "strategy" becomes increasingly complicated. # # For more information, see http://hanoi.kernelthread.com #+ or pp. 186-92 of _The Armchair Universe_ by A.K. Dewdney. # # # ... ... ... # | | | | | | # _|_|_ | | | | # |_____| | | | | # |_______| | | | | # |_________| | | | | # |___________| | | | | # | | | | | | # .--------------------------------------------------------------. # |**************************************************************| # #1 #2 #3 # #=================================================================# E_NOPARAM=66 # No parameter passed to script. E_BADPARAM=67 # Illegal number of disks passed to script. Moves= # Global variable holding number of moves. # Modification to original script. dohanoi() { # Recursive function. case $1 in 0) ;; *) dohanoi "$(($1-1))" $2 $4 $3 echo move $2 "-->" $3 ((Moves++)) # Modification to original script. dohanoi "$(($1-1))" $4 $3 $2 ;; esac } case $# in 1) case $(($1>0)) in # Must have at least one disk. 1) # Nested case statement. dohanoi $1 1 3 2 echo "Total moves = $Moves" # 2^n - 1, where n = # of disks. exit 0; Chapter 23. Functions 406
- 413. Advanced Bash-Scripting Guide ;; *) echo "$0: illegal value for number of disks"; exit $E_BADPARAM; ;; esac ;; *) echo "usage: $0 N" echo " Where "N" is the number of disks." exit $E_NOPARAM; ;; esac # Exercises: # --------- # 1) Would commands beyond this point ever be executed? # Why not? (Easy) # 2) Explain the workings of the workings of the "dohanoi" function. # (Difficult -- see the Dewdney reference, above.) Chapter 23. Functions 407
- 414. Chapter 24. Aliases A Bash alias is essentially nothing more than a keyboard shortcut, an abbreviation, a means of avoiding typing a long command sequence. If, for example, we include alias lm="ls -l | more" in the ~/.bashrc file, then each lm [104] typed at the command-line will automatically be replaced by a ls -l | more. This can save a great deal of typing at the command-line and avoid having to remember complex combinations of commands and options. Setting alias rm="rm -i" (interactive mode delete) may save a good deal of grief, since it can prevent inadvertently deleting important files. In a script, aliases have very limited usefulness. It would be nice if aliases could assume some of the functionality of the C preprocessor, such as macro expansion, but unfortunately Bash does not expand arguments within the alias body. [105] Moreover, a script fails to expand an alias itself within "compound constructs," such as if/then statements, loops, and functions. An added limitation is that an alias will not expand recursively. Almost invariably, whatever we would like an alias to do could be accomplished much more effectively with a function. Example 24-1. Aliases within a script #!/bin/bash # alias.sh shopt -s expand_aliases # Must set this option, else script will not expand aliases. # First, some fun. alias Jesse_James='echo ""Alias Jesse James" was a 1959 comedy starring Bob Hope."' Jesse_James echo; echo; echo; alias ll="ls -l" # May use either single (') or double (") quotes to define an alias. echo "Trying aliased "ll":" ll /usr/X11R6/bin/mk* #* Alias works. echo directory=/usr/X11R6/bin/ prefix=mk* # See if wild card causes problems. echo "Variables "directory" + "prefix" = $directory$prefix" echo alias lll="ls -l $directory$prefix" echo "Trying aliased "lll":" lll # Long listing of all files in /usr/X11R6/bin stating with mk. # An alias can handle concatenated variables -- including wild card -- o.k. TRUE=1 Chapter 24. Aliases 408
- 415. Advanced Bash-Scripting Guide echo if [ TRUE ] then alias rr="ls -l" echo "Trying aliased "rr" within if/then statement:" rr /usr/X11R6/bin/mk* #* Error message results! # Aliases not expanded within compound statements. echo "However, previously expanded alias still recognized:" ll /usr/X11R6/bin/mk* fi echo count=0 while [ $count -lt 3 ] do alias rrr="ls -l" echo "Trying aliased "rrr" within "while" loop:" rrr /usr/X11R6/bin/mk* #* Alias will not expand here either. # alias.sh: line 57: rrr: command not found let count+=1 done echo; echo alias xyz='cat $0' # Script lists itself. # Note strong quotes. xyz # This seems to work, #+ although the Bash documentation suggests that it shouldn't. # # However, as Steve Jacobson points out, #+ the "$0" parameter expands immediately upon declaration of the alias. exit 0 The unalias command removes a previously set alias. Example 24-2. unalias: Setting and unsetting an alias #!/bin/bash # unalias.sh shopt -s expand_aliases # Enables alias expansion. alias llm='ls -al | more' llm echo unalias llm # Unset alias. llm # Error message results, since 'llm' no longer recognized. exit 0 bash$ ./unalias.sh total 6 drwxrwxr-x 2 bozo bozo 3072 Feb 6 14:04 . Chapter 24. Aliases 409
- 416. Advanced Bash-Scripting Guide drwxr-xr-x 40 bozo bozo 2048 Feb 6 14:04 .. -rwxr-xr-x 1 bozo bozo 199 Feb 6 14:04 unalias.sh ./unalias.sh: llm: command not found Chapter 24. Aliases 410
- 417. Chapter 25. List Constructs The and list and or list constructs provide a means of processing a number of commands consecutively. These can effectively replace complex nested if/then or even case statements. Chaining together commands and list command-1 && command-2 && command-3 && ... command-n Each command executes in turn, provided that the previous command has given a return value of true (zero). At the first false (non-zero) return, the command chain terminates (the first command returning false is the last one to execute). Example 25-1. Using an and list to test for command-line arguments #!/bin/bash # and list if [ ! -z "$1" ] && echo "Argument #1 = $1" && [ ! -z "$2" ] && # ^^ ^^ ^^ echo "Argument #2 = $2" then echo "At least 2 arguments passed to script." # All the chained commands return true. else echo "Fewer than 2 arguments passed to script." # At least one of the chained commands returns false. fi # Note that "if [ ! -z $1 ]" works, but its alleged equivalent, # "if [ -n $1 ]" does not. # However, quoting fixes this. # if "[ -n "$1" ]" works. # ^ ^ Careful! # It is always best to QUOTE the variables being tested. # This accomplishes the same thing, using "pure" if/then statements. if [ ! -z "$1" ] then echo "Argument #1 = $1" fi if [ ! -z "$2" ] then echo "Argument #2 = $2" echo "At least 2 arguments passed to script." else echo "Fewer than 2 arguments passed to script." fi # It's longer and more ponderous than using an "and list". exit $? Example 25-2. Another command-line arg test using an and list Chapter 25. List Constructs 411
- 418. Advanced Bash-Scripting Guide #!/bin/bash ARGS=1 # Number of arguments expected. E_BADARGS=85 # Exit value if incorrect number of args passed. test $# -ne $ARGS && # ^^^^^^^^^^^^ condition #1 echo "Usage: `basename $0` $ARGS argument(s)" && exit $E_BADARGS # ^^ # If condition #1 tests true (wrong number of args passed to script), #+ then the rest of the line executes, and script terminates. # Line below executes only if the above test fails. echo "Correct number of arguments passed to this script." exit 0 # To check exit value, do a "echo $?" after script termination. Of course, an and list can also set variables to a default value. arg1=$@ && [ -z "$arg1" ] && arg1=DEFAULT # Set $arg1 to command-line arguments, if any. # But . . . set to DEFAULT if not specified on command-line. or list command-1 || command-2 || command-3 || ... command-n Each command executes in turn for as long as the previous command returns false. At the first true return, the command chain terminates (the first command returning true is the last one to execute). This is obviously the inverse of the "and list". Example 25-3. Using or lists in combination with an and list #!/bin/bash # delete.sh, a not-so-cunning file deletion utility. # Usage: delete filename E_BADARGS=85 if [ -z "$1" ] then echo "Usage: `basename $0` filename" exit $E_BADARGS # No arg? Bail out. else file=$1 # Set filename. fi [ ! -f "$file" ] && echo "File "$file" not found. Cowardly refusing to delete a nonexistent file." # AND LIST, to give error message if file not present. # Note echo message continuing on to a second line after an escape. [ ! -f "$file" ] || (rm -f $file; echo "File "$file" deleted.") # OR LIST, to delete file if present. # Note logic inversion above. Chapter 25. List Constructs 412
- 419. Advanced Bash-Scripting Guide # AND LIST executes on true, OR LIST on false. exit $? If the first command in an or list returns true, it will execute. # ==> The following snippets from the /etc/rc.d/init.d/single #+==> script by Miquel van Smoorenburg #+==> illustrate use of "and" and "or" lists. # ==> "Arrowed" comments added by document author. [ -x /usr/bin/clear ] && /usr/bin/clear # ==> If /usr/bin/clear exists, then invoke it. # ==> Checking for the existence of a command before calling it #+==> avoids error messages and other awkward consequences. # ==> . . . # If they want to run something in single user mode, might as well run it... for i in /etc/rc1.d/S[0-9][0-9]* ; do # Check if the script is there. [ -x "$i" ] || continue # ==> If corresponding file in $PWD *not* found, #+==> then "continue" by jumping to the top of the loop. # Reject backup files and files generated by rpm. case "$1" in *.rpmsave|*.rpmorig|*.rpmnew|*~|*.orig) continue;; esac [ "$i" = "/etc/rc1.d/S00single" ] && continue # ==> Set script name, but don't execute it yet. $i start done # ==> . . . The exit status of an and list or an or list is the exit status of the last command executed. Clever combinations of and and or lists are possible, but the logic may easily become convoluted and require close attention to operator precedence rules, and possibly extensive debugging. false && true || echo false # false # Same result as ( false && true ) || echo false # false # But NOT false && ( true || echo false ) # (nothing echoed) # Note left-to-right grouping and evaluation of statements, #+ since the logic operators "&&" and "||" have equal precedence. # It's usually best to avoid such complexities. # Thanks, S.C. See Example A-7 and Example 7-4 for illustrations of using and / or list constructs to test variables. Chapter 25. List Constructs 413
- 420. Chapter 26. Arrays Newer versions of Bash support one-dimensional arrays. Array elements may be initialized with the variable[xx] notation. Alternatively, a script may introduce the entire array by an explicit declare -a variable statement. To dereference (retrieve the contents of) an array element, use curly bracket notation, that is, ${element[xx]}. Example 26-1. Simple array usage #!/bin/bash area[11]=23 area[13]=37 area[51]=UFOs # Array members need not be consecutive or contiguous. # Some members of the array can be left uninitialized. # Gaps in the array are okay. # In fact, arrays with sparse data ("sparse arrays") #+ are useful in spreadsheet-processing software. echo -n "area[11] = " echo ${area[11]} # {curly brackets} needed. echo -n "area[13] = " echo ${area[13]} echo "Contents of area[51] are ${area[51]}." # Contents of uninitialized array variable print blank (null variable). echo -n "area[43] = " echo ${area[43]} echo "(area[43] unassigned)" echo # Sum of two array variables assigned to third area[5]=`expr ${area[11]} + ${area[13]}` echo "area[5] = area[11] + area[13]" echo -n "area[5] = " echo ${area[5]} area[6]=`expr ${area[11]} + ${area[51]}` echo "area[6] = area[11] + area[51]" echo -n "area[6] = " echo ${area[6]} # This fails because adding an integer to a string is not permitted. echo; echo; echo # ----------------------------------------------------------------- # Another array, "area2". Chapter 26. Arrays 414
- 421. Advanced Bash-Scripting Guide # Another way of assigning array variables... # array_name=( XXX YYY ZZZ ... ) area2=( zero one two three four ) echo -n "area2[0] = " echo ${area2[0]} # Aha, zero-based indexing (first element of array is [0], not [1]). echo -n "area2[1] = " echo ${area2[1]} # [1] is second element of array. # ----------------------------------------------------------------- echo; echo; echo # ----------------------------------------------- # Yet another array, "area3". # Yet another way of assigning array variables... # array_name=([xx]=XXX [yy]=YYY ...) area3=([17]=seventeen [24]=twenty-four) echo -n "area3[17] = " echo ${area3[17]} echo -n "area3[24] = " echo ${area3[24]} # ----------------------------------------------- exit 0 As we have seen, a convenient way of initializing an entire array is the array=( element1 element2 ... elementN ) notation. Bash permits array operations on variables, even if the variables are not explicitly declared as arrays. string=abcABC123ABCabc echo ${string[@]} # abcABC123ABCabc echo ${string[*]} # abcABC123ABCabc echo ${string[0]} # abcABC123ABCabc echo ${string[1]} # No output! # Why? echo ${#string[@]} # 1 # One element in the array. # The string itself. # Thank you, Michael Zick, for pointing this out. Once again this demonstrates that Bash variables are untyped. Example 26-2. Formatting a poem #!/bin/bash # poem.sh: Pretty-prints one of the ABS Guide author's favorite poems. # Lines of the poem (single stanza). Line[1]="I do not know which to prefer," Chapter 26. Arrays 415
- 422. Advanced Bash-Scripting Guide Line[2]="The beauty of inflections" Line[3]="Or the beauty of innuendoes," Line[4]="The blackbird whistling" Line[5]="Or just after." # Note that quoting permits embedding whitespace. # Attribution. Attrib[1]=" Wallace Stevens" Attrib[2]=""Thirteen Ways of Looking at a Blackbird"" # This poem is in the Public Domain (copyright expired). echo tput bold # Bold print. for index in 1 2 3 4 5 # Five lines. do printf " %sn" "${Line[index]}" done for index in 1 2 # Two attribution lines. do printf " %sn" "${Attrib[index]}" done tput sgr0 # Reset terminal. # See 'tput' docs. echo exit 0 # Exercise: # -------- # Modify this script to pretty-print a poem from a text data file. Array variables have a syntax all their own, and even standard Bash commands and operators have special options adapted for array use. Example 26-3. Various array operations #!/bin/bash # array-ops.sh: More fun with arrays. array=( zero one two three four five ) # Element 0 1 2 3 4 5 echo ${array[0]} # zero echo ${array:0} # zero # Parameter expansion of first element, #+ starting at position # 0 (1st character). echo ${array:1} # ero # Parameter expansion of first element, #+ starting at position # 1 (2nd character). echo "--------------" echo ${#array[0]} # 4 Chapter 26. Arrays 416
- 423. Advanced Bash-Scripting Guide # Length of first element of array. echo ${#array} # 4 # Length of first element of array. # (Alternate notation) echo ${#array[1]} # 3 # Length of second element of array. # Arrays in Bash have zero-based indexing. echo ${#array[*]} # 6 # Number of elements in array. echo ${#array[@]} # 6 # Number of elements in array. echo "--------------" array2=( [0]="first element" [1]="second element" [3]="fourth element" ) # ^ ^ ^ ^ ^ ^ ^ ^ ^ # Quoting permits embedding whitespace within individual array elements. echo ${array2[0]} # first element echo ${array2[1]} # second element echo ${array2[2]} # # Skipped in initialization, and therefore null. echo ${array2[3]} # fourth element echo ${#array2[0]} # 13 (length of first element) echo ${#array2[*]} # 3 (number of elements in array) exit Many of the standard string operations work on arrays. Example 26-4. String operations on arrays #!/bin/bash # array-strops.sh: String operations on arrays. # Script by Michael Zick. # Used in ABS Guide with permission. # Fixups: 05 May 08, 04 Aug 08. # In general, any string operation using the ${name ... } notation #+ can be applied to all string elements in an array, #+ with the ${name[@] ... } or ${name[*] ...} notation. arrayZ=( one two three four five five ) echo # Trailing Substring Extraction echo ${arrayZ[@]:0} # one two three four five five # ^ All elements. echo ${arrayZ[@]:1} # two three four five five # ^ All elements following element[0]. echo ${arrayZ[@]:1:2} # two three # ^ Only the two elements after element[0]. Chapter 26. Arrays 417
- 424. Advanced Bash-Scripting Guide echo "---------" # Substring Removal # Removes shortest match from front of string(s). echo ${arrayZ[@]#f*r} # one two three five five # ^ # Applied to all elements of the array. # Matches "four" and removes it. # Longest match from front of string(s) echo ${arrayZ[@]##t*e} # one two four five five # ^^ # Applied to all elements of the array. # Matches "three" and removes it. # Shortest match from back of string(s) echo ${arrayZ[@]%h*e} # one two t four five five # ^ # Applied to all elements of the array. # Matches "hree" and removes it. # Longest match from back of string(s) echo ${arrayZ[@]%%t*e} # one two four five five # ^^ # Applied to all elements of the array. # Matches "three" and removes it. echo "----------------------" # Substring Replacement # Replace first occurrence of substring with replacement. echo ${arrayZ[@]/fiv/XYZ} # one two three four XYZe XYZe # ^ # Applied to all elements of the array. # Replace all occurrences of substring. echo ${arrayZ[@]//iv/YY} # one two three four fYYe fYYe # Applied to all elements of the array. # Delete all occurrences of substring. # Not specifing a replacement defaults to 'delete' ... echo ${arrayZ[@]//fi/} # one two three four ve ve # ^^ # Applied to all elements of the array. # Replace front-end occurrences of substring. echo ${arrayZ[@]/#fi/XY} # one two three four XYve XYve # ^ # Applied to all elements of the array. # Replace back-end occurrences of substring. echo ${arrayZ[@]/%ve/ZZ} # one two three four fiZZ fiZZ # ^ # Applied to all elements of the array. echo ${arrayZ[@]/%o/XX} # one twXX three four five five # ^ # Why? echo "-----------------------------" replacement() { echo -n "!!!" } Chapter 26. Arrays 418
- 425. Advanced Bash-Scripting Guide echo ${arrayZ[@]/%e/$(replacement)} # ^ ^^^^^^^^^^^^^^ # on!!! two thre!!! four fiv!!! fiv!!! # The stdout of replacement() is the replacement string. # Q.E.D: The replacement action is, in effect, an 'assignment.' echo "------------------------------------" # Accessing the "for-each": echo ${arrayZ[@]//*/$(replacement optional_arguments)} # ^^ ^^^^^^^^^^^^^ # !!! !!! !!! !!! !!! !!! # Now, if Bash would only pass the matched string #+ to the function being called . . . echo exit 0 # Before reaching for a Big Hammer -- Perl, Python, or all the rest -- # recall: # $( ... ) is command substitution. # A function runs as a sub-process. # A function writes its output (if echo-ed) to stdout. # Assignment, in conjunction with "echo" and command substitution, #+ can read a function's stdout. # The name[@] notation specifies (the equivalent of) a "for-each" #+ operation. # Bash is more powerful than you think! Command substitution can construct the individual elements of an array. Example 26-5. Loading the contents of a script into an array #!/bin/bash # script-array.sh: Loads this script into an array. # Inspired by an e-mail from Chris Martin (thanks!). script_contents=( $(cat "$0") ) # Stores contents of this script ($0) #+ in an array. for element in $(seq 0 $((${#script_contents[@]} - 1))) do # ${#script_contents[@]} #+ gives number of elements in the array. # # Question: # Why is seq 0 necessary? # Try changing it to seq 1. echo -n "${script_contents[$element]}" # List each field of this script on a single line. # echo -n "${script_contents[element]}" also works because of ${ ... }. echo -n " -- " # Use " -- " as a field separator. done echo exit 0 # Exercise: Chapter 26. Arrays 419
- 426. Advanced Bash-Scripting Guide # -------- # Modify this script so it lists itself #+ in its original format, #+ complete with whitespace, line breaks, etc. In an array context, some Bash builtins have a slightly altered meaning. For example, unset deletes array elements, or even an entire array. Example 26-6. Some special properties of arrays #!/bin/bash declare -a colors # All subsequent commands in this script will treat #+ the variable "colors" as an array. echo "Enter your favorite colors (separated from each other by a space)." read -a colors # Enter at least 3 colors to demonstrate features below. # Special option to 'read' command, #+ allowing assignment of elements in an array. echo element_count=${#colors[@]} # Special syntax to extract number of elements in array. # element_count=${#colors[*]} works also. # # The "@" variable allows word splitting within quotes #+ (extracts variables separated by whitespace). # # This corresponds to the behavior of "$@" and "$*" #+ in positional parameters. index=0 while [ "$index" -lt "$element_count" ] do # List all the elements in the array. echo ${colors[$index]} # ${colors[index]} also works because it's within ${ ... } brackets. let "index = $index + 1" # Or: # ((index++)) done # Each array element listed on a separate line. # If this is not desired, use echo -n "${colors[$index]} " # # Doing it with a "for" loop instead: # for i in "${colors[@]}" # do # echo "$i" # done # (Thanks, S.C.) echo # Again, list all the elements in the array, but using a more elegant method. echo ${colors[@]} # echo ${colors[*]} also works. Chapter 26. Arrays 420
- 427. Advanced Bash-Scripting Guide echo # The "unset" command deletes elements of an array, or entire array. unset colors[1] # Remove 2nd element of array. # Same effect as colors[1]= echo ${colors[@]} # List array again, missing 2nd element. unset colors # Delete entire array. # unset colors[*] and #+ unset colors[@] also work. echo; echo -n "Colors gone." echo ${colors[@]} # List array again, now empty. exit 0 As seen in the previous example, either ${array_name[@]} or ${array_name[*]} refers to all the elements of the array. Similarly, to get a count of the number of elements in an array, use either ${#array_name[@]} or ${#array_name[*]}. ${#array_name} is the length (number of characters) of ${array_name[0]}, the first element of the array. Example 26-7. Of empty arrays and empty elements #!/bin/bash # empty-array.sh # Thanks to Stephane Chazelas for the original example, #+ and to Michael Zick and Omair Eshkenazi, for extending it. # And to Nathan Coulter for clarifications and corrections. # An empty array is not the same as an array with empty elements. array0=( first second third ) array1=( '' ) # "array1" consists of one empty element. array2=( ) # No elements . . . "array2" is empty. array3=( ) # What about this array? echo ListArray() { echo echo "Elements in array0: ${array0[@]}" echo "Elements in array1: ${array1[@]}" echo "Elements in array2: ${array2[@]}" echo "Elements in array3: ${array3[@]}" echo echo "Length of first element in array0 = ${#array0}" echo "Length of first element in array1 = ${#array1}" echo "Length of first element in array2 = ${#array2}" echo "Length of first element in array3 = ${#array3}" echo echo "Number of elements in array0 = ${#array0[*]}" # 3 echo "Number of elements in array1 = ${#array1[*]}" # 1 (Surprise!) echo "Number of elements in array2 = ${#array2[*]}" # 0 echo "Number of elements in array3 = ${#array3[*]}" # 0 } Chapter 26. Arrays 421
- 428. Advanced Bash-Scripting Guide # =================================================================== ListArray # Try extending those arrays. # Adding an element to an array. array0=( "${array0[@]}" "new1" ) array1=( "${array1[@]}" "new1" ) array2=( "${array2[@]}" "new1" ) array3=( "${array3[@]}" "new1" ) ListArray # or array0[${#array0[*]}]="new2" array1[${#array1[*]}]="new2" array2[${#array2[*]}]="new2" array3[${#array3[*]}]="new2" ListArray # When extended as above, arrays are 'stacks' ... # Above is the 'push' ... # The stack 'height' is: height=${#array2[@]} echo echo "Stack height for array2 = $height" # The 'pop' is: unset array2[${#array2[@]}-1] # Arrays are zero-based, height=${#array2[@]} #+ which means first element has index 0. echo echo "POP" echo "New stack height for array2 = $height" ListArray # List only 2nd and 3rd elements of array0. from=1 # Zero-based numbering. to=2 array3=( ${array0[@]:1:2} ) echo echo "Elements in array3: ${array3[@]}" # Works like a string (array of characters). # Try some other "string" forms. # Replacement: array4=( ${array0[@]/second/2nd} ) echo echo "Elements in array4: ${array4[@]}" # Replace all matching wildcarded string. array5=( ${array0[@]//new?/old} ) echo echo "Elements in array5: ${array5[@]}" # Just when you are getting the feel for this . . . array6=( ${array0[@]#*new} ) echo # This one might surprise you. echo "Elements in array6: ${array6[@]}" Chapter 26. Arrays 422
- 429. Advanced Bash-Scripting Guide array7=( ${array0[@]#new1} ) echo # After array6 this should not be a surprise. echo "Elements in array7: ${array7[@]}" # Which looks a lot like . . . array8=( ${array0[@]/new1/} ) echo echo "Elements in array8: ${array8[@]}" # So what can one say about this? # The string operations are performed on #+ each of the elements in var[@] in succession. # Therefore : Bash supports string vector operations. # If the result is a zero length string, #+ that element disappears in the resulting assignment. # However, if the expansion is in quotes, the null elements remain. # Michael Zick: Question, are those strings hard or soft quotes? # Nathan Coulter: There is no such thing as "soft quotes." #! What's really happening is that #!+ the pattern matching happens after #!+ all the other expansions of [word] #!+ in cases like ${parameter#word}. zap='new*' array9=( ${array0[@]/$zap/} ) echo echo "Number of elements in array9: ${#array9[@]}" array9=( "${array0[@]/$zap/}" ) echo "Elements in array9: ${array9[@]}" # This time the null elements remain. echo "Number of elements in array9: ${#array9[@]}" # Just when you thought you were still in Kansas . . . array10=( ${array0[@]#$zap} ) echo echo "Elements in array10: ${array10[@]}" # But, the asterisk in zap won't be interpreted if quoted. array10=( ${array0[@]#"$zap"} ) echo echo "Elements in array10: ${array10[@]}" # Well, maybe we _are_ still in Kansas . . . # (Revisions to above code block by Nathan Coulter.) # Compare array7 with array10. # Compare array8 with array9. # Reiterating: No such thing as soft quotes! # Nathan Coulter explains: # Pattern matching of 'word' in ${parameter#word} is done after #+ parameter expansion and *before* quote removal. # In the normal case, pattern matching is done *after* quote removal. exit The relationship of ${array_name[@]} and ${array_name[*]} is analogous to that between $@ and $*. This powerful array notation has a number of uses. Chapter 26. Arrays 423
- 430. Advanced Bash-Scripting Guide # Copying an array. array2=( "${array1[@]}" ) # or array2="${array1[@]}" # # However, this fails with "sparse" arrays, #+ arrays with holes (missing elements) in them, #+ as Jochen DeSmet points out. # ------------------------------------------ array1[0]=0 # array1[1] not assigned array1[2]=2 array2=( "${array1[@]}" ) # Copy it? echo ${array2[0]} # 0 echo ${array2[2]} # (null), should be 2 # ------------------------------------------ # Adding an element to an array. array=( "${array[@]}" "new element" ) # or array[${#array[*]}]="new element" # Thanks, S.C. The array=( element1 element2 ... elementN ) initialization operation, with the help of command substitution, makes it possible to load the contents of a text file into an array. #!/bin/bash filename=sample_file # cat sample_file # # 1 a b c # 2 d e fg declare -a array1 array1=( `cat "$filename"`) # Loads contents # List file to stdout #+ of $filename into array1. # # array1=( `cat "$filename" | tr 'n' ' '`) # change linefeeds in file to spaces. # Not necessary because Bash does word splitting, #+ changing linefeeds to spaces. echo ${array1[@]} # List the array. # 1 a b c 2 d e fg # # Each whitespace-separated "word" in the file #+ has been assigned to an element of the array. element_count=${#array1[*]} echo $element_count # 8 Clever scripting makes it possible to add array operations. Chapter 26. Arrays 424
- 431. Advanced Bash-Scripting Guide Example 26-8. Initializing arrays #! /bin/bash # array-assign.bash # Array operations are Bash-specific, #+ hence the ".bash" in the script name. # Copyright (c) Michael S. Zick, 2003, All rights reserved. # License: Unrestricted reuse in any form, for any purpose. # Version: $ID$ # # Clarification and additional comments by William Park. # Based on an example provided by Stephane Chazelas #+ which appeared in an earlier version of the #+ Advanced Bash Scripting Guide. # Output format of the 'times' command: # User CPU <space> System CPU # User CPU of dead children <space> System CPU of dead children # Bash has two versions of assigning all elements of an array #+ to a new array variable. # Both drop 'null reference' elements #+ in Bash versions 2.04 and later. # An additional array assignment that maintains the relationship of #+ [subscript]=value for arrays may be added to newer versions. # Constructs a large array using an internal command, #+ but anything creating an array of several thousand elements #+ will do just fine. declare -a bigOne=( /dev/* ) # All the files in /dev . . . echo echo 'Conditions: Unquoted, default IFS, All-Elements-Of' echo "Number of elements in array is ${#bigOne[@]}" # set -vx echo echo '- - testing: =( ${array[@]} ) - -' times declare -a bigTwo=( ${bigOne[@]} ) # Note parens: ^ ^ times echo echo '- - testing: =${array[@]} - -' times declare -a bigThree=${bigOne[@]} # No parentheses this time. times # Comparing the numbers shows that the second form, pointed out #+ by Stephane Chazelas, is faster. # # As William Park explains: #+ The bigTwo array assigned element by element (because of parentheses), Chapter 26. Arrays 425
- 432. Advanced Bash-Scripting Guide #+ whereas bigThree assigned as a single string. # So, in essence, you have: # bigTwo=( [0]="..." [1]="..." [2]="..." ... ) # bigThree=( [0]="... ... ..." ) # # Verify this by: echo ${bigTwo[0]} # echo ${bigThree[0]} # I will continue to use the first form in my example descriptions #+ because I think it is a better illustration of what is happening. # The reusable portions of my examples will actual contain #+ the second form where appropriate because of the speedup. # MSZ: Sorry about that earlier oversight folks. # Note: # ---- # The "declare -a" statements in lines 32 and 44 #+ are not strictly necessary, since it is implicit #+ in the Array=( ... ) assignment form. # However, eliminating these declarations slows down #+ the execution of the following sections of the script. # Try it, and see. exit 0 Adding a superfluous declare -a statement to an array declaration may speed up execution of subsequent operations on the array. Example 26-9. Copying and concatenating arrays #! /bin/bash # CopyArray.sh # # This script written by Michael Zick. # Used here with permission. # How-To "Pass by Name & Return by Name" #+ or "Building your own assignment statement". CpArray_Mac() { # Assignment Command Statement Builder echo -n 'eval ' echo -n "$2" # Destination name echo -n '=( ${' echo -n "$1" # Source name echo -n '[@]} )' # That could all be a single command. # Matter of style only. } declare -f CopyArray # Function "Pointer" Chapter 26. Arrays 426
- 433. Advanced Bash-Scripting Guide CopyArray=CpArray_Mac # Statement Builder Hype() { # Hype the array named $1. # (Splice it together with array containing "Really Rocks".) # Return in array named $2. local -a TMP local -a hype=( Really Rocks ) $($CopyArray $1 TMP) TMP=( ${TMP[@]} ${hype[@]} ) $($CopyArray TMP $2) } declare -a before=( Advanced Bash Scripting ) declare -a after echo "Array Before = ${before[@]}" Hype before after echo "Array After = ${after[@]}" # Too much hype? echo "What ${after[@]:3:2}?" declare -a modest=( ${after[@]:2:1} ${after[@]:3:2} ) # ---- substring extraction ---- echo "Array Modest = ${modest[@]}" # What happened to 'before' ? echo "Array Before = ${before[@]}" exit 0 Example 26-10. More on concatenating arrays #! /bin/bash # array-append.bash # Copyright (c) Michael S. Zick, 2003, All rights reserved. # License: Unrestricted reuse in any form, for any purpose. # Version: $ID$ # # Slightly modified in formatting by M.C. # Array operations are Bash-specific. # Legacy UNIX /bin/sh lacks equivalents. # Pipe the output of this script to 'more' #+ so it doesn't scroll off the terminal. # Or, redirect output to a file. Chapter 26. Arrays 427
- 434. Advanced Bash-Scripting Guide declare -a array1=( zero1 one1 two1 ) # Subscript packed. declare -a array2=( [0]=zero2 [2]=two2 [3]=three2 ) # Subscript sparse -- [1] is not defined. echo echo '- Confirm that the array is really subscript sparse. -' echo "Number of elements: 4" # Hard-coded for illustration. for (( i = 0 ; i < 4 ; i++ )) do echo "Element [$i]: ${array2[$i]}" done # See also the more general code example in basics-reviewed.bash. declare -a dest # Combine (append) two arrays into a third array. echo echo 'Conditions: Unquoted, default IFS, All-Elements-Of operator' echo '- Undefined elements not present, subscripts not maintained. -' # # The undefined elements do not exist; they are not being dropped. dest=( ${array1[@]} ${array2[@]} ) # dest=${array1[@]}${array2[@]} # Strange results, possibly a bug. # Now, list the result. echo echo '- - Testing Array Append - -' cnt=${#dest[@]} echo "Number of elements: $cnt" for (( i = 0 ; i < cnt ; i++ )) do echo "Element [$i]: ${dest[$i]}" done # Assign an array to a single array element (twice). dest[0]=${array1[@]} dest[1]=${array2[@]} # List the result. echo echo '- - Testing modified array - -' cnt=${#dest[@]} echo "Number of elements: $cnt" for (( i = 0 ; i < cnt ; i++ )) do echo "Element [$i]: ${dest[$i]}" done # Examine the modified second element. echo echo '- - Reassign and list second element - -' declare -a subArray=${dest[1]} cnt=${#subArray[@]} echo "Number of elements: $cnt" for (( i = 0 ; i < cnt ; i++ )) Chapter 26. Arrays 428
- 435. Advanced Bash-Scripting Guide do echo "Element [$i]: ${subArray[$i]}" done # The assignment of an entire array to a single element #+ of another array using the '=${ ... }' array assignment #+ has converted the array being assigned into a string, #+ with the elements separated by a space (the first character of IFS). # If the original elements didn't contain whitespace . . . # If the original array isn't subscript sparse . . . # Then we could get the original array structure back again. # Restore from the modified second element. echo echo '- - Listing restored element - -' declare -a subArray=( ${dest[1]} ) cnt=${#subArray[@]} echo "Number of elements: $cnt" for (( i = 0 ; i < cnt ; i++ )) do echo "Element [$i]: ${subArray[$i]}" done echo '- - Do not depend on this behavior. - -' echo '- - This behavior is subject to change - -' echo '- - in versions of Bash newer than version 2.05b - -' # MSZ: Sorry about any earlier confusion folks. exit 0 -- Arrays permit deploying old familiar algorithms as shell scripts. Whether this is necessarily a good idea is left for the reader to decide. Example 26-11. The Bubble Sort #!/bin/bash # bubble.sh: Bubble sort, of sorts. # Recall the algorithm for a bubble sort. In this particular version... # With each successive pass through the array to be sorted, #+ compare two adjacent elements, and swap them if out of order. # At the end of the first pass, the "heaviest" element has sunk to bottom. # At the end of the second pass, the next "heaviest" one has sunk next to bottom. # And so forth. # This means that each successive pass needs to traverse less of the array. # You will therefore notice a speeding up in the printing of the later passes. exchange() { # Swaps two members of the array. local temp=${Countries[$1]} # Temporary storage #+ for element getting swapped out. Chapter 26. Arrays 429
- 436. Advanced Bash-Scripting Guide Countries[$1]=${Countries[$2]} Countries[$2]=$temp return } declare -a Countries # Declare array, #+ optional here since it's initialized below. # Is it permissable to split an array variable over multiple lines #+ using an escape ()? # Yes. Countries=(Netherlands Ukraine Zaire Turkey Russia Yemen Syria Brazil Argentina Nicaragua Japan Mexico Venezuela Greece England Israel Peru Canada Oman Denmark Wales France Kenya Xanadu Qatar Liechtenstein Hungary) # "Xanadu" is the mythical place where, according to Coleridge, #+ Kubla Khan did a pleasure dome decree. clear # Clear the screen to start with. echo "0: ${Countries[*]}" # List entire array at pass 0. number_of_elements=${#Countries[@]} let "comparisons = $number_of_elements - 1" count=1 # Pass number. while [ "$comparisons" -gt 0 ] # Beginning of outer loop do index=0 # Reset index to start of array after each pass. while [ "$index" -lt "$comparisons" ] # Beginning of inner loop do if [ ${Countries[$index]} > ${Countries[`expr $index + 1`]} ] # If out of order... # Recalling that > is ASCII comparison operator #+ within single brackets. # if [[ ${Countries[$index]} > ${Countries[`expr $index + 1`]} ]] #+ also works. then exchange $index `expr $index + 1` # Swap. fi let "index += 1" # Or, index+=1 on Bash, ver. 3.1 or newer. done # End of inner loop # ---------------------------------------------------------------------- # Paulo Marcel Coelho Aragao suggests for-loops as a simpler altenative. # # for (( last = $number_of_elements - 1 ; last > 0 ; last-- )) ## Fix by C.Y. Hunt ^ (Thanks!) # do # for (( i = 0 ; i < last ; i++ )) # do # [[ "${Countries[$i]}" > "${Countries[$((i+1))]}" ]] # && exchange $i $((i+1)) # done Chapter 26. Arrays 430
- 437. Advanced Bash-Scripting Guide # done # ---------------------------------------------------------------------- let "comparisons -= 1" # Since "heaviest" element bubbles to bottom, #+ we need do one less comparison each pass. echo echo "$count: ${Countries[@]}" # Print resultant array at end of each pass. echo let "count += 1" # Increment pass count. done # End of outer loop # All done. exit 0 -- Is it possible to nest arrays within arrays? #!/bin/bash # "Nested" array. # Michael Zick provided this example, #+ with corrections and clarifications by William Park. AnArray=( $(ls --inode --ignore-backups --almost-all --directory --full-time --color=none --time=status --sort=time -l ${PWD} ) ) # Commands and options. # Spaces are significant . . . and don't quote anything in the above. SubArray=( ${AnArray[@]:11:1} ${AnArray[@]:6:5} ) # This array has six elements: #+ SubArray=( [0]=${AnArray[11]} [1]=${AnArray[6]} [2]=${AnArray[7]} # [3]=${AnArray[8]} [4]=${AnArray[9]} [5]=${AnArray[10]} ) # # Arrays in Bash are (circularly) linked lists #+ of type string (char *). # So, this isn't actually a nested array, #+ but it's functionally similar. echo "Current directory and date of last status change:" echo "${SubArray[@]}" exit 0 -- Embedded arrays in combination with indirect references create some fascinating possibilities Example 26-12. Embedded arrays and indirect references #!/bin/bash # embedded-arrays.sh # Embedded arrays and indirect references. Chapter 26. Arrays 431
- 438. Advanced Bash-Scripting Guide # This script by Dennis Leeuw. # Used with permission. # Modified by document author. ARRAY1=( VAR1_1=value11 VAR1_2=value12 VAR1_3=value13 ) ARRAY2=( VARIABLE="test" STRING="VAR1=value1 VAR2=value2 VAR3=value3" ARRAY21=${ARRAY1[*]} ) # Embed ARRAY1 within this second array. function print () { OLD_IFS="$IFS" IFS=$'n' # To print each array element #+ on a separate line. TEST1="ARRAY2[*]" local ${!TEST1} # See what happens if you delete this line. # Indirect reference. # This makes the components of $TEST1 #+ accessible to this function. # Let's see what we've got so far. echo echo "$TEST1 = $TEST1" # Just the name of the variable. echo; echo echo "{$TEST1} = ${!TEST1}" # Contents of the variable. # That's what an indirect #+ reference does. echo echo "-------------------------------------------"; echo echo # Print variable echo "Variable VARIABLE: $VARIABLE" # Print a string element IFS="$OLD_IFS" TEST2="STRING[*]" local ${!TEST2} # Indirect reference (as above). echo "String element VAR2: $VAR2 from STRING" # Print an array element TEST2="ARRAY21[*]" local ${!TEST2} # Indirect reference (as above). echo "Array element VAR1_1: $VAR1_1 from ARRAY21" } print echo exit 0 # As the author of the script notes, #+ "you can easily expand it to create named-hashes in bash." Chapter 26. Arrays 432
- 439. Advanced Bash-Scripting Guide # (Difficult) exercise for the reader: implement this. -- Arrays enable implementing a shell script version of the Sieve of Eratosthenes. Of course, a resource-intensive application of this nature should really be written in a compiled language, such as C. It runs excruciatingly slowly as a script. Example 26-13. The Sieve of Eratosthenes #!/bin/bash # sieve.sh (ex68.sh) # Sieve of Eratosthenes # Ancient algorithm for finding prime numbers. # This runs a couple of orders of magnitude slower #+ than the equivalent program written in C. LOWER_LIMIT=1 # Starting with 1. UPPER_LIMIT=1000 # Up to 1000. # (You may set this higher . . . if you have time on your hands.) PRIME=1 NON_PRIME=0 let SPLIT=UPPER_LIMIT/2 # Optimization: # Need to test numbers only halfway to upper limit. Why? declare -a Primes # Primes[] is an array. initialize () { # Initialize the array. i=$LOWER_LIMIT until [ "$i" -gt "$UPPER_LIMIT" ] do Primes[i]=$PRIME let "i += 1" done # Assume all array members guilty (prime) #+ until proven innocent. } print_primes () { # Print out the members of the Primes[] array tagged as prime. i=$LOWER_LIMIT until [ "$i" -gt "$UPPER_LIMIT" ] do if [ "${Primes[i]}" -eq "$PRIME" ] Chapter 26. Arrays 433
- 440. Advanced Bash-Scripting Guide then printf "%8d" $i # 8 spaces per number gives nice, even columns. fi let "i += 1" done } sift () # Sift out the non-primes. { let i=$LOWER_LIMIT+1 # Let's start with 2. until [ "$i" -gt "$UPPER_LIMIT" ] do if [ "${Primes[i]}" -eq "$PRIME" ] # Don't bother sieving numbers already sieved (tagged as non-prime). then t=$i while [ "$t" -le "$UPPER_LIMIT" ] do let "t += $i " Primes[t]=$NON_PRIME # Tag as non-prime all multiples. done fi let "i += 1" done } # ============================================== # main () # Invoke the functions sequentially. initialize sift print_primes # This is what they call structured programming. # ============================================== echo exit 0 # -------------------------------------------------------- # # Code below line will not execute, because of 'exit.' # This improved version of the Sieve, by Stephane Chazelas, #+ executes somewhat faster. Chapter 26. Arrays 434
- 441. Advanced Bash-Scripting Guide # Must invoke with command-line argument (limit of primes). UPPER_LIMIT=$1 # From command-line. let SPLIT=UPPER_LIMIT/2 # Halfway to max number. Primes=( '' $(seq $UPPER_LIMIT) ) i=1 until (( ( i += 1 ) > SPLIT )) # Need check only halfway. do if [[ -n $Primes[i] ]] then t=$i until (( ( t += i ) > UPPER_LIMIT )) do Primes[t]= done fi done echo ${Primes[*]} exit $? Example 26-14. The Sieve of Eratosthenes, Optimized #!/bin/bash # Optimized Sieve of Eratosthenes # Script by Jared Martin, with very minor changes by ABS Guide author. # Used in ABS Guide with permission (thanks!). # Based on script in Advanced Bash Scripting Guide. # http://tldp.org/LDP/abs/html/arrays.html#PRIMES0 (ex68.sh). # http://www.cs.hmc.edu/~oneill/papers/Sieve-JFP.pdf (reference) # Check results against http://primes.utm.edu/lists/small/1000.txt # Necessary but not sufficient would be, e.g., # (($(sieve 7919 | wc -w) == 1000)) && echo "7919 is the 1000th prime" UPPER_LIMIT=${1:?"Need an upper limit of primes to search."} Primes=( '' $(seq ${UPPER_LIMIT}) ) typeset -i i t Primes[i=1]='' # 1 is not a prime. until (( ( i += 1 ) > (${UPPER_LIMIT}/i) )) # Need check only ith-way. do # Why? if ((${Primes[t=i*(i-1), i]})) # Obscure, but instructive, use of arithmetic expansion in subscript. then until (( ( t += i ) > ${UPPER_LIMIT} )) do Primes[t]=; done fi done # echo ${Primes[*]} echo # Change to original script for pretty-printing (80-col. display). printf "%8d" ${Primes[*]} echo; echo Chapter 26. Arrays 435
- 442. Advanced Bash-Scripting Guide exit $? Compare these array-based prime number generators with alternatives that do not use arrays, Example A-15, and Example 15-46. -- Arrays lend themselves, to some extent, to emulating data structures for which Bash has no native support. Example 26-15. Emulating a push-down stack #!/bin/bash # stack.sh: push-down stack simulation # Similar to the CPU stack, a push-down stack stores data items #+ sequentially, but releases them in reverse order, last-in first-out. BP=100 # Base Pointer of stack array. # Begin at element 100. SP=$BP # Stack Pointer. # Initialize it to "base" (bottom) of stack. Data= # Contents of stack location. # Must use global variable, #+ because of limitation on function return range. # 100 Base pointer <-- Base Pointer # 99 First data item # 98 Second data item # ... More data # Last data item <-- Stack pointer declare -a stack push() # Push item on stack. { if [ -z "$1" ] # Nothing to push? then return fi let "SP -= 1" # Bump stack pointer. stack[$SP]=$1 return } pop() # Pop item off stack. { Data= # Empty out data item. if [ "$SP" -eq "$BP" ] # Stack empty? then Chapter 26. Arrays 436
- 443. Advanced Bash-Scripting Guide return fi # This also keeps SP from getting past 100, #+ i.e., prevents a runaway stack. Data=${stack[$SP]} let "SP += 1" # Bump stack pointer. return } status_report() # Find out what's happening. { echo "-------------------------------------" echo "REPORT" echo "Stack Pointer = $SP" echo "Just popped ""$Data"" off the stack." echo "-------------------------------------" echo } # ======================================================= # Now, for some fun. echo # See if you can pop anything off empty stack. pop status_report echo push garbage pop status_report # Garbage in, garbage out. value1=23; push $value1 value2=skidoo; push $value2 value3=LAST; push $value3 pop # LAST status_report pop # skidoo status_report pop # 23 status_report # Last-in, first-out! # Notice how the stack pointer decrements with each push, #+ and increments with each pop. echo exit 0 # ======================================================= # Exercises: # --------- # 1) Modify the "push()" function to permit pushing # + multiple element on the stack with a single function call. Chapter 26. Arrays 437
- 444. Advanced Bash-Scripting Guide # 2) Modify the "pop()" function to permit popping # + multiple element from the stack with a single function call. # 3) Add error checking to the critical functions. # That is, return an error code, depending on # + successful or unsuccessful completion of the operation, # + and take appropriate action. # 4) Using this script as a starting point, # + write a stack-based 4-function calculator. -- Fancy manipulation of array "subscripts" may require intermediate variables. For projects involving this, again consider using a more powerful programming language, such as Perl or C. Example 26-16. Complex array application: Exploring a weird mathematical series #!/bin/bash # Douglas Hofstadter's notorious "Q-series": # Q(1) = Q(2) = 1 # Q(n) = Q(n - Q(n-1)) + Q(n - Q(n-2)), for n>2 # This is a "chaotic" integer series with strange #+ and unpredictable behavior. # The first 20 terms of the series are: # 1 1 2 3 3 4 5 5 6 6 6 8 8 8 10 9 10 11 11 12 # See Hofstadter's book, _Goedel, Escher, Bach: An Eternal Golden Braid_, #+ p. 137, ff. LIMIT=100 # Number of terms to calculate. LINEWIDTH=20 # Number of terms printed per line. Q[1]=1 # First two terms of series are 1. Q[2]=1 echo echo "Q-series [$LIMIT terms]:" echo -n "${Q[1]} " # Output first two terms. echo -n "${Q[2]} " for ((n=3; n <= $LIMIT; n++)) # C-like loop expression. do # Q[n] = Q[n - Q[n-1]] + Q[n - Q[n-2]] for n>2 # Need to break the expression into intermediate terms, #+ since Bash doesn't handle complex array arithmetic very well. let "n1 = $n - 1" # n-1 let "n2 = $n - 2" # n-2 t0=`expr $n - ${Q[n1]}` # n - Q[n-1] t1=`expr $n - ${Q[n2]}` # n - Q[n-2] T0=${Q[t0]} # Q[n - Q[n-1]] T1=${Q[t1]} # Q[n - Q[n-2]] Q[n]=`expr $T0 + $T1` # Q[n - Q[n-1]] + Q[n - Q[n-2]] Chapter 26. Arrays 438
- 445. Advanced Bash-Scripting Guide echo -n "${Q[n]} " if [ `expr $n % $LINEWIDTH` -eq 0 ] # Format output. then # ^ modulo echo # Break lines into neat chunks. fi done echo exit 0 # This is an iterative implementation of the Q-series. # The more intuitive recursive implementation is left as an exercise. # Warning: calculating this series recursively takes a VERY long time #+ via a script. C/C++ would be orders of magnitude faster. -- Bash supports only one-dimensional arrays, though a little trickery permits simulating multi-dimensional ones. Example 26-17. Simulating a two-dimensional array, then tilting it #!/bin/bash # twodim.sh: Simulating a two-dimensional array. # A one-dimensional array consists of a single row. # A two-dimensional array stores rows sequentially. Rows=5 Columns=5 # 5 X 5 Array. declare -a alpha # char alpha [Rows] [Columns]; # Unnecessary declaration. Why? load_alpha () { local rc=0 local index for i in A B C D E F G H I J K L M N O P Q R S T U V W X Y do # Use different symbols if you like. local row=`expr $rc / $Columns` local column=`expr $rc % $Rows` let "index = $row * $Rows + $column" alpha[$index]=$i # alpha[$row][$column] let "rc += 1" done # Simpler would be #+ declare -a alpha=( A B C D E F G H I J K L M N O P Q R S T U V W X Y ) #+ but this somehow lacks the "flavor" of a two-dimensional array. } print_alpha () Chapter 26. Arrays 439
- 446. Advanced Bash-Scripting Guide { local row=0 local index echo while [ "$row" -lt "$Rows" ] # Print out in "row major" order: do #+ columns vary, #+ while row (outer loop) remains the same. local column=0 echo -n " " # Lines up "square" array with rotated one. while [ "$column" -lt "$Columns" ] do let "index = $row * $Rows + $column" echo -n "${alpha[index]} " # alpha[$row][$column] let "column += 1" done let "row += 1" echo done # The simpler equivalent is # echo ${alpha[*]} | xargs -n $Columns echo } filter () # Filter out negative array indices. { echo -n " " # Provides the tilt. # Explain how. if [[ "$1" -ge 0 && "$1" -lt "$Rows" && "$2" -ge 0 && "$2" -lt "$Columns" ]] then let "index = $1 * $Rows + $2" # Now, print it rotated. echo -n " ${alpha[index]}" # alpha[$row][$column] fi } rotate () # Rotate the array 45 degrees -- { #+ "balance" it on its lower lefthand corner. local row local column for (( row = Rows; row > -Rows; row-- )) do # Step through the array backwards. Why? for (( column = 0; column < Columns; column++ )) do if [ "$row" -ge 0 ] Chapter 26. Arrays 440
- 447. Advanced Bash-Scripting Guide then let "t1 = $column - $row" let "t2 = $column" else let "t1 = $column" let "t2 = $column + $row" fi filter $t1 $t2 # Filter out negative array indices. # What happens if you don't do this? done echo; echo done # Array rotation inspired by examples (pp. 143-146) in #+ "Advanced C Programming on the IBM PC," by Herbert Mayer #+ (see bibliography). # This just goes to show that much of what can be done in C #+ can also be done in shell scripting. } #--------------- Now, let the show begin. ------------# load_alpha # Load the array. print_alpha # Print it out. rotate # Rotate it 45 degrees counterclockwise. #-----------------------------------------------------# exit 0 # This is a rather contrived, not to mention inelegant simulation. # Exercises: # --------- # 1) Rewrite the array loading and printing functions # in a more intuitive and less kludgy fashion. # # 2) Figure out how the array rotation functions work. # Hint: think about the implications of backwards-indexing an array. # # 3) Rewrite this script to handle a non-square array, # such as a 6 X 4 one. # Try to minimize "distortion" when the array is rotated. A two-dimensional array is essentially equivalent to a one-dimensional one, but with additional addressing modes for referencing and manipulating the individual elements by row and column position. For an even more elaborate example of simulating a two-dimensional array, see Example A-10. -- For more interesting scripts using arrays, see: • Example 11-3 • Example 15-46 • Example A-22 • Example A-44 Chapter 26. Arrays 441
- 448. Advanced Bash-Scripting Guide • Example A-41 • Example A-42 Chapter 26. Arrays 442
- 449. Chapter 27. /dev and /proc A Linux or UNIX filesystem typically has the /dev and /proc special-purpose directories. 27.1. /dev The /dev directory contains entries for the physical devices that may or may not be present in the hardware. [106] Appropriately enough, these are called device files. As an example, the hard drive partitions containing the mounted filesystem(s) have entries in /dev, as df shows. bash$ df Filesystem 1k-blocks Used Available Use% Mounted on /dev/hda6 495876 222748 247527 48% / /dev/hda1 50755 3887 44248 9% /boot /dev/hda8 367013 13262 334803 4% /home /dev/hda5 1714416 1123624 503704 70% /usr Among other things, the /dev directory contains loopback devices, such as /dev/loop0. A loopback device is a gimmick that allows an ordinary file to be accessed as if it were a block device. [107] This permits mounting an entire filesystem within a single large file. See Example 16-8 and Example 16-7. A few of the pseudo-devices in /dev have other specialized uses, such as /dev/null, /dev/zero, /dev/urandom, /dev/sda1 (hard drive partition), /dev/udp (User Datagram Packet port), and /dev/tcp. For instance: To manually mount a USB flash drive, append the following line to /etc/fstab. [108] /dev/sda1 /mnt/flashdrive auto noauto,user,noatime 0 0 (See also Example A-23.) Checking whether a disk is in the CD-burner (soft-linked to /dev/hdc): head -1 /dev/hdc # head: cannot open '/dev/hdc' for reading: No medium found # (No disc in the drive.) # head: error reading '/dev/hdc': Input/output error # (There is a disk in the drive, but it can't be read; #+ possibly it's an unrecorded CDR blank.) # Stream of characters and assorted gibberish # (There is a pre-recorded disk in the drive, #+ and this is raw output -- a stream of ASCII and binary data.) # Here we see the wisdom of using 'head' to limit the output #+ to manageable proportions, rather than 'cat' or something similar. # Now, it's just a matter of checking/parsing the output and taking Chapter 27. /dev and /proc 443
- 450. Advanced Bash-Scripting Guide #+ appropriate action. When executing a command on a /dev/tcp/$host/$port pseudo-device file, Bash opens a TCP connection to the associated socket. A socket is a communications node associated with a specific I/O port. (This is analogous to a hardware socket, or receptacle, for a connecting cable.) It permits data transfer between hardware devices on the same machine, between machines on the same network, between machines across different networks, and, of course, between machines at different locations on the Internet. The following examples assume an active Internet connection. Getting the time from nist.gov: bash$ cat </dev/tcp/time.nist.gov/13 53082 04-03-18 04:26:54 68 0 0 502.3 UTC(NIST) * [Mark contributed the above example.] Downloading a URL: bash$ exec 5<>/dev/tcp/www.net.cn/80 bash$ echo -e "GET / HTTP/1.0n" >&5 bash$ cat <&5 [Thanks, Mark and Mihai Maties.] Example 27-1. Using /dev/tcp for troubleshooting #!/bin/bash # dev-tcp.sh: /dev/tcp redirection to check Internet connection. # Script by Troy Engel. # Used with permission. TCP_HOST=www.dns-diy.com # A known spam-friendly ISP. TCP_PORT=80 # Port 80 is http. # Try to connect. (Somewhat similar to a 'ping' . . .) echo "HEAD / HTTP/1.0" >/dev/tcp/${TCP_HOST}/${TCP_PORT} MYEXIT=$? : <<EXPLANATION If bash was compiled with --enable-net-redirections, it has the capability of using a special character device for both TCP and UDP redirections. These redirections are used identically as STDIN/STDOUT/STDERR. The device entries are 30,36 for /dev/tcp: mknod /dev/tcp c 30 36 >From the bash reference: /dev/tcp/host/port If host is a valid hostname or Internet address, and port is an integer port number or service name, Bash attempts to open a TCP connection to the corresponding socket. Chapter 27. /dev and /proc 444
- 451. Advanced Bash-Scripting Guide EXPLANATION if [ "X$MYEXIT" = "X0" ]; then echo "Connection successful. Exit code: $MYEXIT" else echo "Connection unsuccessful. Exit code: $MYEXIT" fi exit $MYEXIT Example 27-2. Playing music #!/bin/bash # music.sh # MUSIC WITHOUT EXTERNAL FILES # Author: Antonio Macchi # Used in ABS Guide with permission # /dev/dsp default = 8000 frames per second, 8 bits per frame (1 byte), #+ 1 channel (mono) duration=2000 # If 8000 bytes = 1 second, then 2000 = 1/4 second. volume=$'xc0' # Max volume = xff (or x00). mute=$'x80' # No volume = x80 (the middle). function mknote () # $1=Note Hz in bytes (e.g. A = 440Hz :: { #+ 8000 fps / 440 = 16 :: A = 16 bytes per second) for t in `seq 0 $duration` do test $(( $t % $1 )) = 0 && echo -n $volume || echo -n $mute done } e=`mknote 49` g=`mknote 41` a=`mknote 36` b=`mknote 32` c=`mknote 30` cis=`mknote 29` d=`mknote 27` e2=`mknote 24` n=`mknote 32767` # European notation. echo -n "$g$e2$d$c$d$c$a$g$n$g$e$n$g$e2$d$c$c$b$c$cis$n$cis$d $n$g$e2$d$c$d$c$a$g$n$g$e$n$g$a$d$c$b$a$b$c" > /dev/dsp # dsp = Digital Signal Processor exit # A "bonny" example of a shell script! 27.2. /proc The /proc directory is actually a pseudo-filesystem. The files in /proc mirror currently running system and kernel processes and contain information and statistics about them. Chapter 27. /dev and /proc 445
- 452. Advanced Bash-Scripting Guide bash$ cat /proc/devices Character devices: 1 mem 2 pty 3 ttyp 4 ttyS 5 cua 7 vcs 10 misc 14 sound 29 fb 36 netlink 128 ptm 136 pts 162 raw 254 pcmcia Block devices: 1 ramdisk 2 fd 3 ide0 9 md bash$ cat /proc/interrupts CPU0 0: 84505 XT-PIC timer 1: 3375 XT-PIC keyboard 2: 0 XT-PIC cascade 5: 1 XT-PIC soundblaster 8: 1 XT-PIC rtc 12: 4231 XT-PIC PS/2 Mouse 14: 109373 XT-PIC ide0 NMI: 0 ERR: 0 bash$ cat /proc/partitions major minor #blocks name rio rmerge rsect ruse wio wmerge wsect wuse running use aveq 3 0 3007872 hda 4472 22260 114520 94240 3551 18703 50384 549710 0 111550 644030 3 1 52416 hda1 27 395 844 960 4 2 14 180 0 800 1140 3 2 1 hda2 0 0 0 0 0 0 0 0 0 0 0 3 4 165280 hda4 10 0 20 210 0 0 0 0 0 210 210 ... bash$ cat /proc/loadavg 0.13 0.42 0.27 2/44 1119 bash$ cat /proc/apm 1.16 1.2 0x03 0x01 0xff 0x80 -1% -1 ? bash$ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 43200 mWh Chapter 27. /dev and /proc 446
- 453. Advanced Bash-Scripting Guide last full capacity: 36640 mWh battery technology: rechargeable design voltage: 10800 mV design capacity warning: 1832 mWh design capacity low: 200 mWh capacity granularity 1: 1 mWh capacity granularity 2: 1 mWh model number: IBM-02K6897 serial number: 1133 battery type: LION OEM info: Panasonic bash$ fgrep Mem /proc/meminfo MemTotal: 515216 kB MemFree: 266248 kB Shell scripts may extract data from certain of the files in /proc. [109] FS=iso # ISO filesystem support in kernel? grep $FS /proc/filesystems # iso9660 kernel_version=$( awk '{ print $3 }' /proc/version ) CPU=$( awk '/model name/ {print $5}' < /proc/cpuinfo ) if [ "$CPU" = "Pentium(R)" ] then run_some_commands ... else run_other_commands ... fi cpu_speed=$( fgrep "cpu MHz" /proc/cpuinfo | awk '{print $4}' ) # Current operating speed (in MHz) of the cpu on your machine. # On a laptop this may vary, depending on use of battery #+ or AC power. #!/bin/bash # get-commandline.sh # Get the command-line parameters of a process. OPTION=cmdline # Identify PID. pid=$( echo $(pidof "$1") | awk '{ print $1 }' ) # Get only first ^^^^^^^^^^^^^^^^^^ of multiple instances. echo echo "Process ID of (first instance of) "$1" = $pid" echo -n "Command-line arguments: " cat /proc/"$pid"/"$OPTION" | xargs -0 echo # Formats output: ^^^^^^^^^^^^^^^ # (Thanks, Han Holl, for the fixup!) Chapter 27. /dev and /proc 447
- 454. Advanced Bash-Scripting Guide echo; echo # For example: # sh get-commandline.sh xterm + devfile="/proc/bus/usb/devices" text="Spd" USB1="Spd=12" USB2="Spd=480" bus_speed=$(fgrep -m 1 "$text" $devfile | awk '{print $9}') # ^^^^ Stop after first match. if [ "$bus_speed" = "$USB1" ] then echo "USB 1.1 port found." # Do something appropriate for USB 1.1. fi It is even possible to control certain peripherals with commands sent to the /proc directory. root# echo on > /proc/acpi/ibm/light This turns on the Thinklight in certain models of IBM/Lenovo Thinkpads. (May not work on all Linux distros.) Of course, caution is advised when writing to /proc. The /proc directory contains subdirectories with unusual numerical names. Every one of these names maps to the process ID of a currently running process. Within each of these subdirectories, there are a number of files that hold useful information about the corresponding process. The stat and status files keep running statistics on the process, the cmdline file holds the command-line arguments the process was invoked with, and the exe file is a symbolic link to the complete path name of the invoking process. There are a few more such files, but these seem to be the most interesting from a scripting standpoint. Example 27-3. Finding the process associated with a PID #!/bin/bash # pid-identifier.sh: # Gives complete path name to process associated with pid. ARGNO=1 # Number of arguments the script expects. E_WRONGARGS=65 E_BADPID=66 E_NOSUCHPROCESS=67 E_NOPERMISSION=68 PROCFILE=exe if [ $# -ne $ARGNO ] then echo "Usage: `basename $0` PID-number" >&2 # Error message >stderr. Chapter 27. /dev and /proc 448
- 455. Advanced Bash-Scripting Guide exit $E_WRONGARGS fi pidno=$( ps ax | grep $1 | awk '{ print $1 }' | grep $1 ) # Checks for pid in "ps" listing, field #1. # Then makes sure it is the actual process, not the process invoked by this script. # The last "grep $1" filters out this possibility. # # pidno=$( ps ax | awk '{ print $1 }' | grep $1 ) # also works, as Teemu Huovila, points out. if [ -z "$pidno" ] # If, after all the filtering, the result is a zero-length string, then #+ no running process corresponds to the pid given. echo "No such process running." exit $E_NOSUCHPROCESS fi # Alternatively: # if ! ps $1 > /dev/null 2>&1 # then # no running process corresponds to the pid given. # echo "No such process running." # exit $E_NOSUCHPROCESS # fi # To simplify the entire process, use "pidof". if [ ! -r "/proc/$1/$PROCFILE" ] # Check for read permission. then echo "Process $1 running, but..." echo "Can't get read permission on /proc/$1/$PROCFILE." exit $E_NOPERMISSION # Ordinary user can't access some files in /proc. fi # The last two tests may be replaced by: # if ! kill -0 $1 > /dev/null 2>&1 # '0' is not a signal, but # this will test whether it is possible # to send a signal to the process. # then echo "PID doesn't exist or you're not its owner" >&2 # exit $E_BADPID # fi exe_file=$( ls -l /proc/$1 | grep "exe" | awk '{ print $11 }' ) # Or exe_file=$( ls -l /proc/$1/exe | awk '{print $11}' ) # # /proc/pid-number/exe is a symbolic link #+ to the complete path name of the invoking process. if [ -e "$exe_file" ] # If /proc/pid-number/exe exists, then #+ then the corresponding process exists. echo "Process #$1 invoked by $exe_file." else echo "No such process running." fi # This elaborate script can *almost* be replaced by # ps ax | grep $1 | awk '{ print $5 }' # However, this will not work... #+ because the fifth field of 'ps' is argv[0] of the process, Chapter 27. /dev and /proc 449
- 456. Advanced Bash-Scripting Guide #+ not the executable file path. # # However, either of the following would work. # find /proc/$1/exe -printf '%ln' # lsof -aFn -p $1 -d txt | sed -ne 's/^n//p' # Additional commentary by Stephane Chazelas. exit 0 Example 27-4. On-line connect status #!/bin/bash PROCNAME=pppd # ppp daemon PROCFILENAME=status # Where to look. NOTCONNECTED=65 INTERVAL=2 # Update every 2 seconds. pidno=$( ps ax | grep -v "ps ax" | grep -v grep | grep $PROCNAME | awk '{ print $1 }' ) # Finding the process number of 'pppd', the 'ppp daemon'. # Have to filter out the process lines generated by the search itself. # # However, as Oleg Philon points out, #+ this could have been considerably simplified by using "pidof". # pidno=$( pidof $PROCNAME ) # # Moral of the story: #+ When a command sequence gets too complex, look for a shortcut. if [ -z "$pidno" ] # If no pid, then process is not running. then echo "Not connected." exit $NOTCONNECTED else echo "Connected."; echo fi while [ true ] # Endless loop, script can be improved here. do if [ ! -e "/proc/$pidno/$PROCFILENAME" ] # While process running, then "status" file exists. then echo "Disconnected." exit $NOTCONNECTED fi netstat -s | grep "packets received" # Get some connect statistics. netstat -s | grep "packets delivered" sleep $INTERVAL echo; echo done exit 0 Chapter 27. /dev and /proc 450
- 457. Advanced Bash-Scripting Guide # As it stands, this script must be terminated with a Control-C. # Exercises: # --------- # Improve the script so it exits on a "q" keystroke. # Make the script more user-friendly in other ways. In general, it is dangerous to write to the files in /proc, as this can corrupt the filesystem or crash the machine. Chapter 27. /dev and /proc 451
- 458. Chapter 28. Of Zeros and Nulls Faultily faultless, icily regular, splendidly null Dead perfection; no more. --Alfred Lord Tennyson /dev/zero ... /dev/null Uses of /dev/null Think of /dev/null as a black hole. It is essentially the equivalent of a write-only file. Everything written to it disappears. Attempts to read or output from it result in nothing. All the same, /dev/null can be quite useful from both the command-line and in scripts. Suppressing stdout. cat $filename >/dev/null # Contents of the file will not list to stdout. Suppressing stderr (from Example 15-3). rm $badname 2>/dev/null # So error messages [stderr] deep-sixed. Suppressing output from both stdout and stderr. cat $filename 2>/dev/null >/dev/null # If "$filename" does not exist, there will be no error message output. # If "$filename" does exist, the contents of the file will not list to stdout. # Therefore, no output at all will result from the above line of code. # # This can be useful in situations where the return code from a command #+ needs to be tested, but no output is desired. # # cat $filename &>/dev/null # also works, as Baris Cicek points out. Deleting contents of a file, but preserving the file itself, with all attendant permissions (from Example 2-1 and Example 2-3): cat /dev/null > /var/log/messages # : > /var/log/messages has same effect, but does not spawn a new process. cat /dev/null > /var/log/wtmp Automatically emptying the contents of a logfile (especially good for dealing with those nasty "cookies" sent by commercial Web sites): Example 28-1. Hiding the cookie jar # Obsolete Netscape browser. # Same principle applies to newer browsers. if [ -f ~/.netscape/cookies ] # Remove, if exists. then Chapter 28. Of Zeros and Nulls 452
- 459. Advanced Bash-Scripting Guide rm -f ~/.netscape/cookies fi ln -s /dev/null ~/.netscape/cookies # All cookies now get sent to a black hole, rather than saved to disk. Uses of /dev/zero Like /dev/null, /dev/zero is a pseudo-device file, but it actually produces a stream of nulls (binary zeros, not the ASCII kind). Output written to /dev/zero disappears, and it is fairly difficult to actually read the nulls emitted there, though it can be done with od or a hex editor. The chief use of /dev/zero is creating an initialized dummy file of predetermined length intended as a temporary swap file. Example 28-2. Setting up a swapfile using /dev/zero #!/bin/bash # Creating a swap file. # A swap file provides a temporary storage cache #+ which helps speed up certain filesystem operations. ROOT_UID=0 # Root has $UID 0. E_WRONG_USER=85 # Not root? FILE=/swap BLOCKSIZE=1024 MINBLOCKS=40 SUCCESS=0 # This script must be run as root. if [ "$UID" -ne "$ROOT_UID" ] then echo; echo "You must be root to run this script."; echo exit $E_WRONG_USER fi blocks=${1:-$MINBLOCKS} # Set to default of 40 blocks, #+ if nothing specified on command-line. # This is the equivalent of the command block below. # -------------------------------------------------- # if [ -n "$1" ] # then # blocks=$1 # else # blocks=$MINBLOCKS # fi # -------------------------------------------------- if [ "$blocks" -lt $MINBLOCKS ] then blocks=$MINBLOCKS # Must be at least 40 blocks long. fi ###################################################################### echo "Creating swap file of size $blocks blocks (KB)." dd if=/dev/zero of=$FILE bs=$BLOCKSIZE count=$blocks # Zero out file. Chapter 28. Of Zeros and Nulls 453
- 460. Advanced Bash-Scripting Guide mkswap $FILE $blocks # Designate it a swap file. swapon $FILE # Activate swap file. retcode=$? # Everything worked? # Note that if one or more of these commands fails, #+ then it could cause nasty problems. ###################################################################### # Exercise: # Rewrite the above block of code so that if it does not execute #+ successfully, then: # 1) an error message is echoed to stderr, # 2) all temporary files are cleaned up, and # 3) the script exits in an orderly fashion with an #+ appropriate error code. echo "Swap file created and activated." exit $retcode Another application of /dev/zero is to "zero out" a file of a designated size for a special purpose, such as mounting a filesystem on a loopback device (see Example 16-8) or "securely" deleting a file (see Example 15-60). Example 28-3. Creating a ramdisk #!/bin/bash # ramdisk.sh # A "ramdisk" is a segment of system RAM memory #+ which acts as if it were a filesystem. # Its advantage is very fast access (read/write time). # Disadvantages: volatility, loss of data on reboot or powerdown. #+ less RAM available to system. # # Of what use is a ramdisk? # Keeping a large dataset, such as a table or dictionary on ramdisk, #+ speeds up data lookup, since memory access is much faster than disk access. E_NON_ROOT_USER=70 # Must run as root. ROOTUSER_NAME=root MOUNTPT=/mnt/ramdisk SIZE=2000 # 2K blocks (change as appropriate) BLOCKSIZE=1024 # 1K (1024 byte) block size DEVICE=/dev/ram0 # First ram device username=`id -nu` if [ "$username" != "$ROOTUSER_NAME" ] then echo "Must be root to run "`basename $0`"." exit $E_NON_ROOT_USER fi if [ ! -d "$MOUNTPT" ] # Test whether mount point already there, then #+ so no error if this script is run mkdir $MOUNTPT #+ multiple times. fi ############################################################################## Chapter 28. Of Zeros and Nulls 454
- 461. Advanced Bash-Scripting Guide dd if=/dev/zero of=$DEVICE count=$SIZE bs=$BLOCKSIZE # Zero out RAM device. # Why is this necessary? mke2fs $DEVICE # Create an ext2 filesystem on it. mount $DEVICE $MOUNTPT # Mount it. chmod 777 $MOUNTPT # Enables ordinary user to access ramdisk. # However, must be root to unmount it. ############################################################################## # Need to test whether above commands succeed. Could cause problems otherwise. # Exercise: modify this script to make it safer. echo ""$MOUNTPT" now available for use." # The ramdisk is now accessible for storing files, even by an ordinary user. # Caution, the ramdisk is volatile, and its contents will disappear #+ on reboot or power loss. # Copy anything you want saved to a regular directory. # After reboot, run this script to again set up ramdisk. # Remounting /mnt/ramdisk without the other steps will not work. # Suitably modified, this script can by invoked in /etc/rc.d/rc.local, #+ to set up ramdisk automatically at bootup. # That may be appropriate on, for example, a database server. exit 0 In addition to all the above, /dev/zero is needed by ELF (Executable and Linking Format) UNIX/Linux binaries. Chapter 28. Of Zeros and Nulls 455
- 462. Chapter 29. Debugging Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it. --Brian Kernighan The Bash shell contains no built-in debugger, and only bare-bones debugging-specific commands and constructs. Syntax errors or outright typos in the script generate cryptic error messages that are often of no help in debugging a non-functional script. Example 29-1. A buggy script #!/bin/bash # ex74.sh # This is a buggy script. # Where, oh where is the error? a=37 if [$a -gt 27 ] then echo $a fi exit 0 Output from script: ./ex74.sh: [37: command not found What's wrong with the above script? Hint: after the if. Example 29-2. Missing keyword #!/bin/bash # missing-keyword.sh: What error message will this generate? for a in 1 2 3 do echo "$a" # done # Required keyword 'done' commented out in line 7. exit 0 Output from script: missing-keyword.sh: line 10: syntax error: unexpected end of file Note that the error message does not necessarily reference the line in which the error occurs, but the line where the Bash interpreter finally becomes aware of the error. Error messages may disregard comment lines in a script when reporting the line number of a syntax error. Chapter 29. Debugging 456
- 463. Advanced Bash-Scripting Guide What if the script executes, but does not work as expected? This is the all too familiar logic error. Example 29-3. test24: another buggy script #!/bin/bash # This script is supposed to delete all filenames in current directory #+ containing embedded spaces. # It doesn't work. # Why not? badname=`ls | grep ' '` # Try this: # echo "$badname" rm "$badname" exit 0 Try to find out what's wrong with Example 29-3 by uncommenting the echo "$badname" line. Echo statements are useful for seeing whether what you expect is actually what you get. In this particular case, rm "$badname" will not give the desired results because $badname should not be quoted. Placing it in quotes ensures that rm has only one argument (it will match only one filename). A partial fix is to remove to quotes from $badname and to reset $IFS to contain only a newline, IFS=$'n'. However, there are simpler ways of going about it. # Correct methods of deleting filenames containing spaces. rm * * rm *" "* rm *' '* # Thank you. S.C. Summarizing the symptoms of a buggy script, 1. It bombs with a "syntax error" message, or 2. It runs, but does not work as expected (logic error). 3. It runs, works as expected, but has nasty side effects (logic bomb). Tools for debugging non-working scripts include 1. Inserting echo statements at critical points in the script to trace the variables, and otherwise give a snapshot of what is going on. Even better is an echo that echoes only when debug is on. ### debecho (debug-echo), by Stefano Falsetto ### ### Will echo passed parameters only if DEBUG is set to a value. ### debecho () { if [ ! -z "$DEBUG" ]; then echo "$1" >&2 # ^^^ to stderr fi Chapter 29. Debugging 457
- 464. Advanced Bash-Scripting Guide } DEBUG=on Whatever=whatnot debecho $Whatever # whatnot DEBUG= Whatever=notwhat debecho $Whatever # (Will not echo.) 2. Using the tee filter to check processes or data flows at critical points. 3. Setting option flags -n -v -x sh -n scriptname checks for syntax errors without actually running the script. This is the equivalent of inserting set -n or set -o noexec into the script. Note that certain types of syntax errors can slip past this check. sh -v scriptname echoes each command before executing it. This is the equivalent of inserting set -v or set -o verbose in the script. The -n and -v flags work well together. sh -nv scriptname gives a verbose syntax check. sh -x scriptname echoes the result each command, but in an abbreviated manner. This is the equivalent of inserting set -x or set -o xtrace in the script. Inserting set -u or set -o nounset in the script runs it, but gives an unbound variable error message at each attempt to use an undeclared variable. 4. Using an "assert" function to test a variable or condition at critical points in a script. (This is an idea borrowed from C.) Example 29-4. Testing a condition with an assert #!/bin/bash # assert.sh ####################################################################### assert () # If condition false, { #+ exit from script #+ with appropriate error message. E_PARAM_ERR=98 E_ASSERT_FAILED=99 if [ -z "$2" ] # Not enough parameters passed then #+ to assert() function. return $E_PARAM_ERR # No damage done. fi lineno=$2 if [ ! $1 ] then echo "Assertion failed: "$1"" echo "File "$0", line $lineno" # Give name of file and line number. exit $E_ASSERT_FAILED # else Chapter 29. Debugging 458
- 465. Advanced Bash-Scripting Guide # return # and continue executing the script. fi } # Insert a similar assert() function into a script you need to debug. ####################################################################### a=5 b=4 condition="$a -lt $b" # Error message and exit from script. # Try setting "condition" to something else #+ and see what happens. assert "$condition" $LINENO # The remainder of the script executes only if the "assert" does not fail. # Some commands. # Some more commands . . . echo "This statement echoes only if the "assert" does not fail." # . . . # More commands . . . exit $? 5. Using the $LINENO variable and the caller builtin. 6. Trapping at exit. The exit command in a script triggers a signal 0, terminating the process, that is, the script itself. [110] It is often useful to trap the exit, forcing a "printout" of variables, for example. The trap must be the first command in the script. Trapping signals trap Specifies an action on receipt of a signal; also useful for debugging. A signal is a message sent to a process, either by the kernel or another process, telling it to take some specified action (usually to terminate). For example, hitting a Control-C sends a user interrupt, an INT signal, to a running program. A simple instance: trap '' 2 # Ignore interrupt 2 (Control-C), with no action specified. trap 'echo "Control-C disabled."' 2 # Message when Control-C pressed. Example 29-5. Trapping at exit #!/bin/bash # Hunting variables with a trap. trap 'echo Variable Listing --- a = $a b = $b' EXIT Chapter 29. Debugging 459
- 466. Advanced Bash-Scripting Guide # EXIT is the name of the signal generated upon exit from a script. # # The command specified by the "trap" doesn't execute until #+ the appropriate signal is sent. echo "This prints before the "trap" --" echo "even though the script sees the "trap" first." echo a=39 b=36 exit 0 # Note that commenting out the 'exit' command makes no difference, #+ since the script exits in any case after running out of commands. Example 29-6. Cleaning up after Control-C #!/bin/bash # logon.sh: A quick 'n dirty script to check whether you are on-line yet. umask 177 # Make sure temp files are not world readable. TRUE=1 LOGFILE=/var/log/messages # Note that $LOGFILE must be readable #+ (as root, chmod 644 /var/log/messages). TEMPFILE=temp.$$ # Create a "unique" temp file name, using process id of the script. # Using 'mktemp' is an alternative. # For example: # TEMPFILE=`mktemp temp.XXXXXX` KEYWORD=address # At logon, the line "remote IP address xxx.xxx.xxx.xxx" # appended to /var/log/messages. ONLINE=22 USER_INTERRUPT=13 CHECK_LINES=100 # How many lines in log file to check. trap 'rm -f $TEMPFILE; exit $USER_INTERRUPT' TERM INT # Cleans up the temp file if script interrupted by control-c. echo while [ $TRUE ] #Endless loop. do tail -n $CHECK_LINES $LOGFILE> $TEMPFILE # Saves last 100 lines of system log file as temp file. # Necessary, since newer kernels generate many log messages at log on. search=`grep $KEYWORD $TEMPFILE` # Checks for presence of the "IP address" phrase, #+ indicating a successful logon. if [ ! -z "$search" ] # Quotes necessary because of possible spaces. then echo "On-line" rm -f $TEMPFILE # Clean up temp file. exit $ONLINE Chapter 29. Debugging 460
- 467. Advanced Bash-Scripting Guide else echo -n "." # The -n option to echo suppresses newline, #+ so you get continuous rows of dots. fi sleep 1 done # Note: if you change the KEYWORD variable to "Exit", #+ this script can be used while on-line #+ to check for an unexpected logoff. # Exercise: Change the script, per the above note, # and prettify it. exit 0 # Nick Drage suggests an alternate method: while true do ifconfig ppp0 | grep UP 1> /dev/null && echo "connected" && exit 0 echo -n "." # Prints dots (.....) until connected. sleep 2 done # Problem: Hitting Control-C to terminate this process may be insufficient. #+ (Dots may keep on echoing.) # Exercise: Fix this. # Stephane Chazelas has yet another alternative: CHECK_INTERVAL=1 while ! tail -n 1 "$LOGFILE" | grep -q "$KEYWORD" do echo -n . sleep $CHECK_INTERVAL done echo "On-line" # Exercise: Discuss the relative strengths and weaknesses # of each of these various approaches. The DEBUG argument to trap causes a specified action to execute after every command in a script. This permits tracing variables, for example. Example 29-7. Tracing a variable #!/bin/bash trap 'echo "VARIABLE-TRACE> $variable = "$variable""' DEBUG # Echoes the value of $variable after every command. variable=29 echo " Just initialized $variable to $variable." Chapter 29. Debugging 461
- 468. Advanced Bash-Scripting Guide let "variable *= 3" echo " Just multiplied $variable by 3." exit # The "trap 'command1 . . . command2 . . .' DEBUG" construct is #+ more appropriate in the context of a complex script, #+ where inserting multiple "echo $variable" statements might be #+ awkward and time-consuming. # Thanks, Stephane Chazelas for the pointer. Output of script: VARIABLE-TRACE> $variable = "" VARIABLE-TRACE> $variable = "29" Just initialized $variable to 29. VARIABLE-TRACE> $variable = "29" VARIABLE-TRACE> $variable = "87" Just multiplied $variable by 3. VARIABLE-TRACE> $variable = "87" Of course, the trap command has other uses aside from debugging, such as disabling certain keystrokes within a script (see Example A-43). Example 29-8. Running multiple processes (on an SMP box) #!/bin/bash # parent.sh # Running multiple processes on an SMP box. # Author: Tedman Eng # This is the first of two scripts, #+ both of which must be present in the current working directory. LIMIT=$1 # Total number of process to start NUMPROC=4 # Number of concurrent threads (forks?) PROCID=1 # Starting Process ID echo "My PID is $$" function start_thread() { if [ $PROCID -le $LIMIT ] ; then ./child.sh $PROCID& let "PROCID++" else echo "Limit reached." wait exit fi } while [ "$NUMPROC" -gt 0 ]; do start_thread; let "NUMPROC--" done Chapter 29. Debugging 462
- 469. Advanced Bash-Scripting Guide while true do trap "start_thread" SIGRTMIN done exit 0 # ======== Second script follows ======== #!/bin/bash # child.sh # Running multiple processes on an SMP box. # This script is called by parent.sh. # Author: Tedman Eng temp=$RANDOM index=$1 shift let "temp %= 5" let "temp += 4" echo "Starting $index Time:$temp" "$@" sleep ${temp} echo "Ending $index" kill -s SIGRTMIN $PPID exit 0 # ======================= SCRIPT AUTHOR'S NOTES ======================= # # It's not completely bug free. # I ran it with limit = 500 and after the first few hundred iterations, #+ one of the concurrent threads disappeared! # Not sure if this is collisions from trap signals or something else. # Once the trap is received, there's a brief moment while executing the #+ trap handler but before the next trap is set. During this time, it may #+ be possible to miss a trap signal, thus miss spawning a child process. # No doubt someone may spot the bug and will be writing #+ . . . in the future. # ===================================================================== # # ----------------------------------------------------------------------# ################################################################# # The following is the original script written by Vernia Damiano. # Unfortunately, it doesn't work properly. ################################################################# #!/bin/bash Chapter 29. Debugging 463
- 470. Advanced Bash-Scripting Guide # Must call script with at least one integer parameter #+ (number of concurrent processes). # All other parameters are passed through to the processes started. INDICE=8 # Total number of process to start TEMPO=5 # Maximum sleep time per process E_BADARGS=65 # No arg(s) passed to script. if [ $# -eq 0 ] # Check for at least one argument passed to script. then echo "Usage: `basename $0` number_of_processes [passed params]" exit $E_BADARGS fi NUMPROC=$1 # Number of concurrent process shift PARAMETRI=( "$@" ) # Parameters of each process function avvia() { local temp local index temp=$RANDOM index=$1 shift let "temp %= $TEMPO" let "temp += 1" echo "Starting $index Time:$temp" "$@" sleep ${temp} echo "Ending $index" kill -s SIGRTMIN $$ } function parti() { if [ $INDICE -gt 0 ] ; then avvia $INDICE "${PARAMETRI[@]}" & let "INDICE--" else trap : SIGRTMIN fi } trap parti SIGRTMIN while [ "$NUMPROC" -gt 0 ]; do parti; let "NUMPROC--" done wait trap - SIGRTMIN exit $? : <<SCRIPT_AUTHOR_COMMENTS I had the need to run a program, with specified options, on a number of different files, using a SMP machine. So I thought [I'd] keep running a specified number of processes and start a new one each time . . . one of these terminates. The "wait" instruction does not help, since it waits for a given process Chapter 29. Debugging 464
- 471. Advanced Bash-Scripting Guide or *all* process started in background. So I wrote [this] bash script that can do the job, using the "trap" instruction. --Vernia Damiano SCRIPT_AUTHOR_COMMENTS trap '' SIGNAL (two adjacent apostrophes) disables SIGNAL for the remainder of the script. trap SIGNAL restores the functioning of SIGNAL once more. This is useful to protect a critical portion of a script from an undesirable interrupt. trap '' 2 # Signal 2 is Control-C, now disabled. command command command trap 2 # Reenables Control-C Version 3 of Bash adds the following internal variables for use by the debugger. 1. $BASH_ARGC Number of command-line arguments passed to script, similar to $#. 2. $BASH_ARGV Final command-line parameter passed to script, equivalent ${!#}. 3. $BASH_COMMAND Command currently executing. 4. $BASH_EXECUTION_STRING The option string following the -c option to Bash. 5. $BASH_LINENO In a function, indicates the line number of the function call. 6. $BASH_REMATCH Array variable associated with =~ conditional regex matching. 7. $BASH_SOURCE Same as $0. 8. $BASH_SUBSHELL Chapter 29. Debugging 465
- 472. Chapter 30. Options Options are settings that change shell and/or script behavior. The set command enables options within a script. At the point in the script where you want the options to take effect, use set -o option-name or, in short form, set -option-abbrev. These two forms are equivalent. #!/bin/bash set -o verbose # Echoes all commands before executing. #!/bin/bash set -v # Exact same effect as above. To disable an option within a script, use set +o option-name or set +option-abbrev. #!/bin/bash set -o verbose # Command echoing on. command ... command set +o verbose # Command echoing off. command # Not echoed. set -v # Command echoing on. command ... command set +v # Command echoing off. command exit 0 An alternate method of enabling options in a script is to specify them immediately following the #! script header. #!/bin/bash -x # # Body of script follows. Chapter 30. Options 466
- 473. Advanced Bash-Scripting Guide It is also possible to enable script options from the command line. Some options that will not work with set are available this way. Among these are -i, force script to run interactive. bash -v script-name bash -o verbose script-name The following is a listing of some useful options. They may be specified in either abbreviated form (preceded by a single dash) or by complete name (preceded by a double dash or by -o). Table 30-1. Bash options Abbreviation Name Effect -B brace Enable brace expansion (default setting = on) expansion +B brace Disable brace expansion expansion -C noclobber Prevent overwriting of files by redirection (may be overridden by >|) -D (none) List double-quoted strings prefixed by $, but do not execute commands in script -a allexport Export all defined variables -b notify Notify when jobs running in background terminate (not of much use in a script) -c ... (none) Read commands from ... checkjobs Informs user of any open jobs upon shell exit. Introduced in version 4 of Bash, and still "experimental." Usage: shopt -s checkjobs (Caution: may hang!) -e errexit Abort script at first error, when a command exits with non-zero status (except in until or while loops, if-tests, list constructs) -f noglob Filename expansion (globbing) disabled globstar globbing Enables the ** globbing operator (version 4+ of Bash). Usage: shopt -s star-match globstar -i interactive Script runs in interactive mode -n noexec Read commands in script, but do not execute them (syntax check) -o (none) Invoke the Option-Name option Option-Name -o posix POSIX Change the behavior of Bash, or invoked script, to conform to POSIX standard. -o pipefail pipe failure Causes a pipeline to return the exit status of the last command in the pipe that returned a non-zero return value. -p privileged Script runs as "suid" (caution!) -r restricted Script runs in restricted mode (see Chapter 21). -s stdin Read commands from stdin -t (none) Exit after first command Chapter 30. Options 467
- 474. Advanced Bash-Scripting Guide -u nounset Attempt to use undefined variable outputs error message, and forces an exit -v verbose Print each command to stdout before executing it -x xtrace Similar to -v, but expands commands - (none) End of options flag. All other arguments are positional parameters. -- (none) Unset positional parameters. If arguments given (-- arg1 arg2), positional parameters set to arguments. Chapter 30. Options 468
- 475. Chapter 31. Gotchas Turandot: Gli enigmi sono tre, la morte una! Caleph: No, no! Gli enigmi sono tre, una la vita! --Puccini Here are some (non-recommended!) scripting practices that will bring excitement into an otherwise dull life. • Assigning reserved words or characters to variable names. case=value0 # Causes problems. 23skidoo=value1 # Also problems. # Variable names starting with a digit are reserved by the shell. # Try _23skidoo=value1. Starting variables with an underscore is okay. # However . . . using just an underscore will not work. _=25 echo $_ # $_ is a special variable set to last arg of last command. # But . . . _ is a valid function name! xyz((!*=value2 # Causes severe problems. # As of version 3 of Bash, periods are not allowed within variable names. • Using a hyphen or other reserved characters in a variable name (or function name). var-1=23 # Use 'var_1' instead. function-whatever () # Error # Use 'function_whatever ()' instead. # As of version 3 of Bash, periods are not allowed within function names. function.whatever () # Error # Use 'functionWhatever ()' instead. • Using the same name for a variable and a function. This can make a script difficult to understand. do_something () { echo "This function does something with "$1"." } do_something=do_something do_something do_something # All this is legal, but highly confusing. • Using whitespace inappropriately. In contrast to other programming languages, Bash can be quite finicky about whitespace. var1 = 23 # 'var1=23' is correct. # On line above, Bash attempts to execute command "var1" # with the arguments "=" and "23". Chapter 31. Gotchas 469
- 476. Advanced Bash-Scripting Guide let c = $a - $b # Instead: let c=$a-$b or let "c = $a - $b" if [ $a -le 5] # if [ $a -le 5 ] is correct. # ^^ if [ "$a" -le 5 ] is even better. # [[ $a -le 5 ]] also works. • Not terminating with a semicolon the final command in a code block within curly brackets. { ls -l; df; echo "Done." } # bash: syntax error: unexpected end of file { ls -l; df; echo "Done."; } # ^ ### Final command needs semicolon. • Assuming uninitialized variables (variables before a value is assigned to them) are "zeroed out". An uninitialized variable has a value of null, not zero. #!/bin/bash echo "uninitialized_var = $uninitialized_var" # uninitialized_var = • Mixing up = and -eq in a test. Remember, = is for comparing literal variables and -eq for integers. if [ "$a" = 273 ] # Is $a an integer or string? if [ "$a" -eq 273 ] # If $a is an integer. # Sometimes you can interchange -eq and = without adverse consequences. # However . . . a=273.0 # Not an integer. if [ "$a" = 273 ] then echo "Comparison works." else echo "Comparison does not work." fi # Comparison does not work. # Same with a=" 273" and a="0273". # Likewise, problems trying to use "-eq" with non-integer values. if [ "$a" -eq 273.0 ] then echo "a = $a" fi # Aborts with an error message. # test.sh: [: 273.0: integer expression expected • Misusing string comparison operators. Example 31-1. Numerical and string comparison are not equivalent #!/bin/bash Chapter 31. Gotchas 470
- 477. Advanced Bash-Scripting Guide # bad-op.sh: Trying to use a string comparison on integers. echo number=1 # The following while-loop has two errors: #+ one blatant, and the other subtle. while [ "$number" < 5 ] # Wrong! Should be: while [ "$number" -lt 5 ] do echo -n "$number " let "number += 1" done # Attempt to run this bombs with the error message: #+ bad-op.sh: line 10: 5: No such file or directory # Within single brackets, "<" must be escaped, #+ and even then, it's still wrong for comparing integers. echo "---------------------" while [ "$number" < 5 ] # 1 2 3 4 do # echo -n "$number " # It *seems* to work, but . . . let "number += 1" #+ it actually does an ASCII comparison, done #+ rather than a numerical one. echo; echo "---------------------" # This can cause problems. For example: lesser=5 greater=105 if [ "$greater" < "$lesser" ] then echo "$greater is less than $lesser" fi # 105 is less than 5 # In fact, "105" actually is less than "5" #+ in a string comparison (ASCII sort order). echo exit 0 • Attempting to use let to set string variables. let "a = hello, you" echo "$a" # 0 • Sometimes variables within "test" brackets ([ ]) need to be quoted (double quotes). Failure to do so may cause unexpected behavior. See Example 7-6, Example 19-5, and Example 9-6. • Quoting a variable containing whitespace prevents splitting. Sometimes this produces unintended consequences. • Commands issued from a script may fail to execute because the script owner lacks execute permission for them. If a user cannot invoke a command from the command-line, then putting it into a script will likewise fail. Try changing the attributes of the command in question, perhaps even setting the suid bit Chapter 31. Gotchas 471
- 478. Advanced Bash-Scripting Guide (as root, of course). • Attempting to use - as a redirection operator (which it is not) will usually result in an unpleasant surprise. command1 2> - | command2 # Trying to redirect error output of command1 into a pipe . . . # . . . will not work. command1 2>& - | command2 # Also futile. Thanks, S.C. • Using Bash version 2+ functionality may cause a bailout with error messages. Older Linux machines may have version 1.XX of Bash as the default installation. #!/bin/bash minimum_version=2 # Since Chet Ramey is constantly adding features to Bash, # you may set $minimum_version to 2.XX, 3.XX, or whatever is appropriate. E_BAD_VERSION=80 if [ "$BASH_VERSION" < "$minimum_version" ] then echo "This script works only with Bash, version $minimum or greater." echo "Upgrade strongly recommended." exit $E_BAD_VERSION fi ... • Using Bash-specific functionality in a Bourne shell script (#!/bin/sh) on a non-Linux machine may cause unexpected behavior. A Linux system usually aliases sh to bash, but this does not necessarily hold true for a generic UNIX machine. • Using undocumented features in Bash turns out to be a dangerous practice. In previous releases of this book there were several scripts that depended on the "feature" that, although the maximum value of an exit or return value was 255, that limit did not apply to negative integers. Unfortunately, in version 2.05b and later, that loophole disappeared. See Example 23-9. • A script with DOS-type newlines (rn) will fail to execute, since #!/bin/bashrn is not recognized, not the same as the expected #!/bin/bashn. The fix is to convert the script to UNIX-style newlines. #!/bin/bash echo "Here" unix2dos $0 # Script changes itself to DOS format. chmod 755 $0 # Change back to execute permission. # The 'unix2dos' command removes execute permission. ./$0 # Script tries to run itself again. # But it won't work as a DOS file. echo "There" Chapter 31. Gotchas 472
- 479. Advanced Bash-Scripting Guide exit 0 • A shell script headed by #!/bin/sh will not run in full Bash-compatibility mode. Some Bash-specific functions might be disabled. Scripts that need complete access to all the Bash-specific extensions should start with #!/bin/bash. • Putting whitespace in front of the terminating limit string of a here document will cause unexpected behavior in a script. • Putting more than one echo statement in a function whose output is captured. add2 () { echo "Whatever ... " # Delete this line! let "retval = $1 + $2" echo $retval } num1=12 num2=43 echo "Sum of $num1 and $num2 = $(add2 $num1 $num2)" # Sum of 12 and 43 = Whatever ... # 55 # The "echoes" concatenate. This will not work. • A script may not export variables back to its parent process, the shell, or to the environment. Just as we learned in biology, a child process can inherit from a parent, but not vice versa. WHATEVER=/home/bozo export WHATEVER exit 0 bash$ echo $WHATEVER bash$ Sure enough, back at the command prompt, $WHATEVER remains unset. • Setting and manipulating variables in a subshell, then attempting to use those same variables outside the scope of the subshell will result an unpleasant surprise. Example 31-2. Subshell Pitfalls #!/bin/bash # Pitfalls of variables in a subshell. outer_variable=outer echo echo "outer_variable = $outer_variable" echo ( # Begin subshell echo "outer_variable inside subshell = $outer_variable" inner_variable=inner # Set echo "inner_variable inside subshell = $inner_variable" Chapter 31. Gotchas 473
- 480. Advanced Bash-Scripting Guide outer_variable=inner # Will value change globally? echo "outer_variable inside subshell = $outer_variable" # Will 'exporting' make a difference? # export inner_variable # export outer_variable # Try it and see. # End subshell ) echo echo "inner_variable outside subshell = $inner_variable" # Unset. echo "outer_variable outside subshell = $outer_variable" # Unchanged. echo exit 0 # What happens if you uncomment lines 19 and 20? # Does it make a difference? • Piping echo output to a read may produce unexpected results. In this scenario, the read acts as if it were running in a subshell. Instead, use the set command (as in Example 14-18). Example 31-3. Piping the output of echo to a read #!/bin/bash # badread.sh: # Attempting to use 'echo and 'read' #+ to assign variables non-interactively. a=aaa b=bbb c=ccc echo "one two three" | read a b c # Try to reassign a, b, and c. echo echo "a = $a" # a = aaa echo "b = $b" # b = bbb echo "c = $c" # c = ccc # Reassignment failed. # ------------------------------ # Try the following alternative. var=`echo "one two three"` set -- $var a=$1; b=$2; c=$3 echo "-------" echo "a = $a" # a = one echo "b = $b" # b = two echo "c = $c" # c = three # Reassignment succeeded. # ------------------------------ Chapter 31. Gotchas 474
- 481. Advanced Bash-Scripting Guide # Note also that an echo to a 'read' works within a subshell. # However, the value of the variable changes *only* within the subshell. a=aaa # Starting all over again. b=bbb c=ccc echo; echo echo "one two three" | ( read a b c; echo "Inside subshell: "; echo "a = $a"; echo "b = $b"; echo "c = $c" ) # a = one # b = two # c = three echo "-----------------" echo "Outside subshell: " echo "a = $a" # a = aaa echo "b = $b" # b = bbb echo "c = $c" # c = ccc echo exit 0 In fact, as Anthony Richardson points out, piping to any loop can cause a similar problem. # Loop piping troubles. # This example by Anthony Richardson, #+ with addendum by Wilbert Berendsen. foundone=false find $HOME -type f -atime +30 -size 100k | while true do read f echo "$f is over 100KB and has not been accessed in over 30 days" echo "Consider moving the file to archives." foundone=true # ------------------------------------ echo "Subshell level = $BASH_SUBSHELL" # Subshell level = 1 # Yes, we're inside a subshell. # ------------------------------------ done # foundone will always be false here since it is #+ set to true inside a subshell if [ $foundone = false ] then echo "No files need archiving." fi # =====================Now, here is the correct way:================= foundone=false for f in $(find $HOME -type f -atime +30 -size 100k) # No pipe here. do echo "$f is over 100KB and has not been accessed in over 30 days" echo "Consider moving the file to archives." foundone=true done Chapter 31. Gotchas 475
- 482. Advanced Bash-Scripting Guide if [ $foundone = false ] then echo "No files need archiving." fi # ==================And here is another alternative================== # Places the part of the script that reads the variables #+ within a code block, so they share the same subshell. # Thank you, W.B. find $HOME -type f -atime +30 -size 100k | { foundone=false while read f do echo "$f is over 100KB and has not been accessed in over 30 days" echo "Consider moving the file to archives." foundone=true done if ! $foundone then echo "No files need archiving." fi } A lookalike problem occurs when trying to write the stdout of a tail -f piped to grep. tail -f /var/log/messages | grep "$ERROR_MSG" >> error.log # The "error.log" file will not have anything written to it. # As Samuli Kaipiainen points out, this results from grep #+ buffering its output. # The fix is to add the "--line-buffered" parameter to grep. • Using "suid" commands within scripts is risky, as it may compromise system security. [111] • Using shell scripts for CGI programming may be problematic. Shell script variables are not "typesafe," and this can cause undesirable behavior as far as CGI is concerned. Moreover, it is difficult to "cracker-proof" shell scripts. • Bash does not handle the double slash (//) string correctly. • Bash scripts written for Linux or BSD systems may need fixups to run on a commercial UNIX (or Apple OSX) machine. Such scripts often employ the GNU set of commands and filters, which have greater functionality than their generic UNIX counterparts. This is particularly true of such text processing utilites as tr. Danger is near thee -- Beware, beware, beware, beware. Many brave hearts are asleep in the deep. So beware -- Beware. Chapter 31. Gotchas 476
- 483. Advanced Bash-Scripting Guide --A.J. Lamb and H.W. Petrie Chapter 31. Gotchas 477
- 484. Chapter 32. Scripting With Style Get into the habit of writing shell scripts in a structured and systematic manner. Even on-the-fly and "written on the back of an envelope" scripts will benefit if you take a few minutes to plan and organize your thoughts before sitting down and coding. Herewith are a few stylistic guidelines. This is not (necessarily) intended as an Official Shell Scripting Stylesheet. 32.1. Unofficial Shell Scripting Stylesheet • Comment your code. This makes it easier for others to understand (and appreciate), and easier for you to maintain. PASS="$PASS${MATRIX:$(($RANDOM%${#MATRIX})):1}" # It made perfect sense when you wrote it last year, #+ but now it's a complete mystery. # (From Antek Sawicki's "pw.sh" script.) Add descriptive headers to your scripts and functions. #!/bin/bash #************************************************# # xyz.sh # # written by Bozo Bozeman # # July 05, 2001 # # # # Clean up project files. # #************************************************# E_BADDIR=85 # No such directory. projectdir=/home/bozo/projects # Directory to clean up. # --------------------------------------------------------- # # cleanup_pfiles () # # Removes all files in designated directory. # # Parameter: $target_directory # # Returns: 0 on success, $E_BADDIR if something went wrong. # # --------------------------------------------------------- # cleanup_pfiles () { if [ ! -d "$1" ] # Test if target directory exists. then echo "$1 is not a directory." return $E_BADDIR fi rm -f "$1"/* return 0 # Success. } cleanup_pfiles $projectdir exit $? • Avoid using "magic numbers," [112] that is, "hard-wired" literal constants. Use meaningful variable names instead. This makes the script easier to understand and permits making changes and updates without breaking the application. Chapter 32. Scripting With Style 478
- 485. Advanced Bash-Scripting Guide if [ -f /var/log/messages ] then ... fi # A year later, you decide to change the script to check /var/log/syslog. # It is now necessary to manually change the script, instance by instance, #+ and hope nothing breaks. # A better way: LOGFILE=/var/log/messages # Only line that needs to be changed. if [ -f "$LOGFILE" ] then ... fi • Choose descriptive names for variables and functions. fl=`ls -al $dirname` # Cryptic. file_listing=`ls -al $dirname` # Better. MAXVAL=10 # All caps used for a script constant. while [ "$index" -le "$MAXVAL" ] ... E_NOTFOUND=95 # Uppercase for an errorcode, #+ and name prefixed with E_. if [ ! -e "$filename" ] then echo "File $filename not found." exit $E_NOTFOUND fi MAIL_DIRECTORY=/var/spool/mail/bozo # Uppercase for an environmental export MAIL_DIRECTORY #+ variable. GetAnswer () # Mixed case works well for a { #+ function name, especially prompt=$1 #+ when it improves legibility. echo -n $prompt read answer return $answer } GetAnswer "What is your favorite number? " favorite_number=$? echo $favorite_number _uservariable=23 # Permissible, but not recommended. # It's better for user-defined variables not to start with an underscore. # Leave that for system variables. • Use exit codes in a systematic and meaningful way. E_WRONG_ARGS=95 ... ... exit $E_WRONG_ARGS See also Appendix D. Chapter 32. Scripting With Style 479
- 486. Advanced Bash-Scripting Guide Ender suggests using the exit codes in /usr/include/sysexits.h in shell scripts, though these are primarily intended for C and C++ programming. • Use standardized parameter flags for script invocation. Ender proposes the following set of flags. -a All: Return all information (including hidden file info). -b Brief: Short version, usually for other scripts. -c Copy, concatenate, etc. -d Daily: Use information from the whole day, and not merely information for a specific instance/user. -e Extended/Elaborate: (often does not include hidden file info). -h Help: Verbose usage w/descs, aux info, discussion, help. See also -V. -l Log output of script. -m Manual: Launch man-page for base command. -n Numbers: Numerical data only. -r Recursive: All files in a directory (and/or all sub-dirs). -s Setup & File Maintenance: Config files for this script. -u Usage: List of invocation flags for the script. -v Verbose: Human readable output, more or less formatted. -V Version / License / Copy(right|left) / Contribs (email too). See also Section F.1. • Break complex scripts into simpler modules. Use functions where appropriate. See Example 34-4. • Don't use a complex construct where a simpler one will do. COMMAND if [ $? -eq 0 ] ... # Redundant and non-intuitive. if COMMAND ... # More concise (if perhaps not quite as legible). ... reading the UNIX source code to the Bourne shell (/bin/sh). I was shocked at how much simple algorithms could be made cryptic, and therefore useless, by a poor choice of code style. I asked myself, "Could someone be proud of this code?" --Landon Noll Chapter 32. Scripting With Style 480
- 487. Chapter 33. Miscellany Nobody really knows what the Bourne shell's grammar is. Even examination of the source code is little help. --Tom Duff 33.1. Interactive and non-interactive shells and scripts An interactive shell reads commands from user input on a tty. Among other things, such a shell reads startup files on activation, displays a prompt, and enables job control by default. The user can interact with the shell. A shell running a script is always a non-interactive shell. All the same, the script can still access its tty. It is even possible to emulate an interactive shell in a script. #!/bin/bash MY_PROMPT='$ ' while : do echo -n "$MY_PROMPT" read line eval "$line" done exit 0 # This example script, and much of the above explanation supplied by # Stéphane Chazelas (thanks again). Let us consider an interactive script to be one that requires input from the user, usually with read statements (see Example 14-3). "Real life" is actually a bit messier than that. For now, assume an interactive script is bound to a tty, a script that a user has invoked from the console or an xterm. Init and startup scripts are necessarily non-interactive, since they must run without human intervention. Many administrative and system maintenance scripts are likewise non-interactive. Unvarying repetitive tasks cry out for automation by non-interactive scripts. Non-interactive scripts can run in the background, but interactive ones hang, waiting for input that never comes. Handle that difficulty by having an expect script or embedded here document feed input to an interactive script running as a background job. In the simplest case, redirect a file to supply input to a read statement (read variable <file). These particular workarounds make possible general purpose scripts that run in either interactive or non-interactive modes. If a script needs to test whether it is running in an interactive shell, it is simply a matter of finding whether the prompt variable, $PS1 is set. (If the user is being prompted for input, then the script needs to display a prompt.) if [ -z $PS1 ] # no prompt? then # non-interactive ... else Chapter 33. Miscellany 481
- 488. Advanced Bash-Scripting Guide # interactive ... fi Alternatively, the script can test for the presence of option "i" in the $- flag. case $- in *i*) # interactive shell ;; *) # non-interactive shell ;; # (Courtesy of "UNIX F.A.Q.," 1993) However, John Lange describes an alternative method, using the -t test operator. # Test for a terminal! fd=0 # stdin # As we recall, the -t test option checks whether the stdin, [ -t 0 ], #+ or stdout, [ -t 1 ], in a given script is running in a terminal. if [ -t "$fd" ] then echo interactive else echo non-interactive fi # But, as John points out: # if [ -t 0 ] works ... when you're logged in locally # but fails when you invoke the command remotely via ssh. # So for a true test you also have to test for a socket. if [[ -t "$fd" || -S /dev/stdin ]] then echo interactive else echo non-interactive fi Scripts may be forced to run in interactive mode with the -i option or with a #!/bin/bash -i header. Be aware that this can cause erratic script behavior or show error messages even when no error is present. 33.2. Operator Precedence In a script, operations execute in order of precedence: the higher precedence operations execute before the lower precedence ones. [113] Table 33-1. Operator Precedence Operator Meaning Comments HIGHEST PRECEDENCE var++ var-- post-increment, post-decrement C-style operators Chapter 33. Miscellany 482
- 489. Advanced Bash-Scripting Guide ++var --var pre-increment, pre-decrement ! ~ negation logical / bitwise, inverts sense of following operator ** exponentiation arithmetic operation * / % multiplication, division, modulo arithmetic operation + - addition, subtraction arithmetic operation << >> left, right shift bitwise -z -n unary comparison string is/is-not null -e -f -t -x, etc. unary comparison file-test < -lt > -gt <= -le >= -ge compound comparison string and integer -nt -ot -ef compound comparison file-test == -eq != -ne equality / inequality test operators, string and integer & AND bitwise ^ XOR exclusive OR, bitwise | OR bitwise && -a AND logical, compound comparison || -o OR logical, compound comparison ?: trinary operator C-style = assignment (do not confuse with equality test) *= /= %= += -= <<= >>= &= combination assignment times-equal, divide-equal, mod-equal, etc. , comma links a sequence of operations LOWEST PRECEDENCE In practice, all you really need to remember is the following: • The "My Dear Aunt Sally" mantra (multiply, divide, add, subtract) for the familiar arithmetic operations. • The compound logical operators, &&, ||, -a, and -o have low precedence. • The order of evaluation of equal-precedence operators is usually left-to-right. Now, let's utilize our knowledge of operator precedence to analyze a couple of lines from the /etc/init.d/functions file, as found in the Fedora Core Linux distro. while [ -n "$remaining" -a "$retry" -gt 0 ]; do # This looks rather daunting at first glance. Chapter 33. Miscellany 483
- 490. Advanced Bash-Scripting Guide # Separate the conditions: while [ -n "$remaining" -a "$retry" -gt 0 ]; do # --condition 1-- ^^ --condition 2- # If variable "$remaining" is not zero length #+ AND (-a) #+ variable "$retry" is greater-than zero #+ then #+ the [ expresion-within-condition-brackets ] returns success (0) #+ and the while-loop executes an iteration. # ============================================================== # Evaluate "condition 1" and "condition 2" ***before*** #+ ANDing them. Why? Because the AND (-a) has a lower precedence #+ than the -n and -gt operators, #+ and therefore gets evaluated *last*. ################################################################# if [ -f /etc/sysconfig/i18n -a -z "${NOLOCALE:-}" ] ; then # Again, separate the conditions: if [ -f /etc/sysconfig/i18n -a -z "${NOLOCALE:-}" ] ; then # --condition 1--------- ^^ --condition 2----- # If file "/etc/sysconfig/i18n" exists #+ AND (-a) #+ variable $NOLOCALE is zero length #+ then #+ the [ test-expresion-within-condition-brackets ] returns success (0) #+ and the commands following execute. # # As before, the AND (-a) gets evaluated *last* #+ because it has the lowest precedence of the operators within #+ the test brackets. # ============================================================== # Note: # ${NOLOCALE:-} is a parameter expansion that seems redundant. # But, if $NOLOCALE has not been declared, it gets set to *null*, #+ in effect declaring it. # This makes a difference in some contexts. To avoid confusion or error in a complex sequence of test operators, break up the sequence into bracketed sections. if [ "$v1" -gt "$v2" -o "$v1" -lt "$v2" -a -e "$filename" ] # Unclear what's going on here... if [[ "$v1" -gt "$v2" ]] || [[ "$v1" -lt "$v2" ]] && [[ -e "$filename" ]] # Much better -- the condition tests are grouped in logical sections. 33.3. Shell Wrappers A wrapper is a shell script that embeds a system command or utility, that accepts and passes a set of parameters to that command. [114] Wrapping a script around a complex command-line simplifies invoking it. Chapter 33. Miscellany 484
- 491. Advanced Bash-Scripting Guide This is expecially useful with sed and awk. A sed or awk script would normally be invoked from the command-line by a sed -e 'commands' or awk 'commands'. Embedding such a script in a Bash script permits calling it more simply, and makes it reusable. This also enables combining the functionality of sed and awk, for example piping the output of a set of sed commands to awk. As a saved executable file, you can then repeatedly invoke it in its original form or modified, without the inconvenience of retyping it on the command-line. Example 33-1. shell wrapper #!/bin/bash # This simple script removes blank lines from a file. # No argument checking. # # You might wish to add something like: # # E_NOARGS=85 # if [ -z "$1" ] # then # echo "Usage: `basename $0` target-file" # exit $E_NOARGS # fi sed -e /^$/d "$1" # Same as # sed -e '/^$/d' filename # invoked from the command-line. # The '-e' means an "editing" command follows (optional here). # '^' indicates the beginning of line, '$' the end. # This matches lines with nothing between the beginning and the end -- #+ blank lines. # The 'd' is the delete command. # Quoting the command-line arg permits #+ whitespace and special characters in the filename. # Note that this script doesn't actually change the target file. # If you need to do that, redirect its output. exit Example 33-2. A slightly more complex shell wrapper #!/bin/bash # subst.sh: a script that substitutes one pattern for #+ another in a file, #+ i.e., "sh subst.sh Smith Jones letter.txt". # Jones replaces Smith. ARGS=3 # Script requires 3 arguments. E_BADARGS=85 # Wrong number of arguments passed to script. if [ $# -ne "$ARGS" ] Chapter 33. Miscellany 485
- 492. Advanced Bash-Scripting Guide then echo "Usage: `basename $0` old-pattern new-pattern filename" exit $E_BADARGS fi old_pattern=$1 new_pattern=$2 if [ -f "$3" ] then file_name=$3 else echo "File "$3" does not exist." exit $E_BADARGS fi # ----------------------------------------------- # Here is where the heavy work gets done. sed -e "s/$old_pattern/$new_pattern/g" $file_name # ----------------------------------------------- # 's' is, of course, the substitute command in sed, #+ and /pattern/ invokes address matching. # The 'g,' or global flag causes substitution for EVERY #+ occurence of $old_pattern on each line, not just the first. # Read the 'sed' docs for an in-depth explanation. exit $? # Redirect the output of this script to write to a file. Example 33-3. A generic shell wrapper that writes to a logfile #!/bin/bash # Generic shell wrapper that performs an operation #+ and logs it. # Must set the following two variables. OPERATION= # Can be a complex chain of commands, #+ for example an awk script or a pipe . . . LOGFILE= # Command-line arguments, if any, for the operation. OPTIONS="$@" # Log it. echo "`date` + `whoami` + $OPERATION "$@"" >> $LOGFILE # Now, do it. exec $OPERATION "$@" # It's necessary to do the logging before the operation. # Why? Example 33-4. A shell wrapper around an awk script #!/bin/bash # pr-ascii.sh: Prints a table of ASCII characters. Chapter 33. Miscellany 486
- 493. Advanced Bash-Scripting Guide START=33 # Range of printable ASCII characters (decimal). END=127 # Will not work for unprintable characters (> 127). echo " Decimal Hex Character" # Header. echo " ------- --- ---------" for ((i=START; i<=END; i++)) do echo $i | awk '{printf(" %3d %2x %cn", $1, $1, $1)}' # The Bash printf builtin will not work in this context: # printf "%c" "$i" done exit 0 # Decimal Hex Character # ------- --- --------- # 33 21 ! # 34 22 " # 35 23 # # 36 24 $ # # . . . # # 122 7a z # 123 7b { # 124 7c | # 125 7d } # Redirect the output of this script to a file #+ or pipe it to "more": sh pr-asc.sh | more Example 33-5. A shell wrapper around another awk script #!/bin/bash # Adds up a specified column (of numbers) in the target file. # Floating-point (decimal) numbers okay, because awk can handle them. ARGS=2 E_WRONGARGS=85 if [ $# -ne "$ARGS" ] # Check for proper number of command-line args. then echo "Usage: `basename $0` filename column-number" exit $E_WRONGARGS fi filename=$1 column_number=$2 # Passing shell variables to the awk part of the script is a bit tricky. # One method is to strong-quote the Bash-script variable #+ within the awk script. # $'$BASH_SCRIPT_VAR' # ^ ^ # This is done in the embedded awk script below. # See the awk documentation for more details. Chapter 33. Miscellany 487
- 494. Advanced Bash-Scripting Guide # A multi-line awk script is here invoked by # awk ' # ... # ... # ... # ' # Begin awk script. # ----------------------------- awk ' { total += $'"${column_number}"' } END { print total } ' "$filename" # ----------------------------- # End awk script. # It may not be safe to pass shell variables to an embedded awk script, #+ so Stephane Chazelas proposes the following alternative: # --------------------------------------- # awk -v column_number="$column_number" ' # { total += $column_number # } # END { # print total # }' "$filename" # --------------------------------------- exit 0 For those scripts needing a single do-it-all tool, a Swiss army knife, there is Perl. Perl combines the capabilities of sed and awk, and throws in a large subset of C, to boot. It is modular and contains support for everything ranging from object-oriented programming up to and including the kitchen sink. Short Perl scripts lend themselves to embedding within shell scripts, and there may be some substance to the claim that Perl can totally replace shell scripting (though the author of the ABS Guide remains skeptical). Example 33-6. Perl embedded in a Bash script #!/bin/bash # Shell commands may precede the Perl script. echo "This precedes the embedded Perl script within "$0"." echo "===============================================================" perl -e 'print "This is an embedded Perl script.n";' # Like sed, Perl also uses the "-e" option. echo "===============================================================" echo "However, the script may also contain shell and system commands." exit Chapter 33. Miscellany 488
- 495. Advanced Bash-Scripting Guide It is even possible to combine a Bash script and Perl script within the same file. Depending on how the script is invoked, either the Bash part or the Perl part will execute. Example 33-7. Bash and Perl scripts combined #!/bin/bash # bashandperl.sh echo "Greetings from the Bash part of the script, $0." # More Bash commands may follow here. exit # End of Bash part of the script. # ======================================================= #!/usr/bin/perl # This part of the script must be invoked with # perl -x bashandperl.sh print "Greetings from the Perl part of the script, $0.n"; # Perl doesn't seem to like "echo" ... # More Perl commands may follow here. # End of Perl part of the script. bash$ bash bashandperl.sh Greetings from the Bash part of the script. bash$ perl -x bashandperl.sh Greetings from the Perl part of the script. One interesting example of a complex shell wrapper is Martin Matusiak's undvd script, which provides an easy-to-use command-line interface to the complex mencoder utility. Another example is Itzchak Rehberg's Ext3Undel, a set of scripts to recover deleted file on an ext3 filesystem. 33.4. Tests and Comparisons: Alternatives For tests, the [[ ]] construct may be more appropriate than [ ]. Likewise, arithmetic comparisons might benefit from the (( )) construct. a=8 # All of the comparisons below are equivalent. test "$a" -lt 16 && echo "yes, $a < 16" # "and list" /bin/test "$a" -lt 16 && echo "yes, $a < 16" [ "$a" -lt 16 ] && echo "yes, $a < 16" [[ $a -lt 16 ]] && echo "yes, $a < 16" # Quoting variables within (( a < 16 )) && echo "yes, $a < 16" # [[ ]] and (( )) not necessary. city="New York" # Again, all of the comparisons below are equivalent. test "$city" < Paris && echo "Yes, Paris is greater than $city" # Greater ASCII order. Chapter 33. Miscellany 489
- 496. Advanced Bash-Scripting Guide /bin/test "$city" < Paris && echo "Yes, Paris is greater than $city" [ "$city" < Paris ] && echo "Yes, Paris is greater than $city" [[ $city < Paris ]] && echo "Yes, Paris is greater than $city" # Need not quote $city. # Thank you, S.C. 33.5. A script calling itself (recursion) Can a script recursively call itself? Indeed. Example 33-8. A (useless) script that recursively calls itself #!/bin/bash # recurse.sh # Can a script recursively call itself? # Yes, but is this of any practical use? # (See the following.) RANGE=10 MAXVAL=9 i=$RANDOM let "i %= $RANGE" # Generate a random number between 0 and $RANGE - 1. if [ "$i" -lt "$MAXVAL" ] then echo "i = $i" ./$0 # Script recursively spawns a new instance of itself. fi # Each child script does the same, until #+ a generated $i equals $MAXVAL. # Using a "while" loop instead of an "if/then" test causes problems. # Explain why. exit 0 # Note: # ---- # This script must have execute permission for it to work properly. # This is the case even if it is invoked by an "sh" command. # Explain why. Example 33-9. A (useful) script that recursively calls itself #!/bin/bash # pb.sh: phone book # Written by Rick Boivie, and used with permission. # Modifications by ABS Guide author. MINARGS=1 # Script needs at least one argument. DATAFILE=./phonebook # A data file in current working directory #+ named "phonebook" must exist. Chapter 33. Miscellany 490
- 497. Advanced Bash-Scripting Guide PROGNAME=$0 E_NOARGS=70 # No arguments error. if [ $# -lt $MINARGS ]; then echo "Usage: "$PROGNAME" data-to-look-up" exit $E_NOARGS fi if [ $# -eq $MINARGS ]; then grep $1 "$DATAFILE" # 'grep' prints an error message if $DATAFILE not present. else ( shift; "$PROGNAME" $* ) | grep $1 # Script recursively calls itself. fi exit 0 # Script exits here. # Therefore, it's o.k. to put #+ non-hashmarked comments and data after this point. # ------------------------------------------------------------------------ Sample "phonebook" datafile: John Doe 1555 Main St., Baltimore, MD 21228 (410) 222-3333 Mary Moe 9899 Jones Blvd., Warren, NH 03787 (603) 898-3232 Richard Roe 856 E. 7th St., New York, NY 10009 (212) 333-4567 Sam Roe 956 E. 8th St., New York, NY 10009 (212) 444-5678 Zoe Zenobia 4481 N. Baker St., San Francisco, SF 94338 (415) 501-1631 # ------------------------------------------------------------------------ $bash pb.sh Roe Richard Roe 856 E. 7th St., New York, NY 10009 (212) 333-4567 Sam Roe 956 E. 8th St., New York, NY 10009 (212) 444-5678 $bash pb.sh Roe Sam Sam Roe 956 E. 8th St., New York, NY 10009 (212) 444-5678 # When more than one argument is passed to this script, #+ it prints *only* the line(s) containing all the arguments. Example 33-10. Another (useful) script that recursively calls itself #!/bin/bash # usrmnt.sh, written by Anthony Richardson # Used with permission. # usage: usrmnt.sh # description: mount device, invoking user must be listed in the # MNTUSERS group in the /etc/sudoers file. # ---------------------------------------------------------- # This is a usermount script that reruns itself using sudo. # A user with the proper permissions only has to type # usermount /dev/fd0 /mnt/floppy # instead of # sudo usermount /dev/fd0 /mnt/floppy Chapter 33. Miscellany 491
- 498. Advanced Bash-Scripting Guide # I use this same technique for all of my #+ sudo scripts, because I find it convenient. # ---------------------------------------------------------- # If SUDO_COMMAND variable is not set we are not being run through #+ sudo, so rerun ourselves. Pass the user's real and group id . . . if [ -z "$SUDO_COMMAND" ] then mntusr=$(id -u) grpusr=$(id -g) sudo $0 $* exit 0 fi # We will only get here if we are being run by sudo. /bin/mount $* -o uid=$mntusr,gid=$grpusr exit 0 # Additional notes (from the author of this script): # ------------------------------------------------- # 1) Linux allows the "users" option in the /etc/fstab # file so that any user can mount removable media. # But, on a server, I like to allow only a few # individuals access to removable media. # I find using sudo gives me more control. # 2) I also find sudo to be more convenient than # accomplishing this task through groups. # 3) This method gives anyone with proper permissions # root access to the mount command, so be careful # about who you allow access. # You can get finer control over which access can be mounted # by using this same technique in separate mntfloppy, mntcdrom, # and mntsamba scripts. Too many levels of recursion can exhaust the script's stack space, causing a segfault. 33.6. "Colorizing" Scripts The ANSI [115] escape sequences set screen attributes, such as bold text, and color of foreground and background. DOS batch files commonly used ANSI escape codes for color output, and so can Bash scripts. Example 33-11. A "colorized" address database #!/bin/bash # ex30a.sh: "Colorized" version of ex30.sh. # Crude address database clear # Clear the screen. echo -n " " echo -e 'E[37;44m'"033[1mContact List033[0m" # White on blue background Chapter 33. Miscellany 492
- 499. Advanced Bash-Scripting Guide echo; echo echo -e "033[1mChoose one of the following persons:033[0m" # Bold tput sgr0 # Reset attributes. echo "(Enter only the first letter of name.)" echo echo -en 'E[47;34m'"033[1mE033[0m" # Blue tput sgr0 # Reset colors to "normal." echo "vans, Roland" # "[E]vans, Roland" echo -en 'E[47;35m'"033[1mJ033[0m" # Magenta tput sgr0 echo "ones, Mildred" echo -en 'E[47;32m'"033[1mS033[0m" # Green tput sgr0 echo "mith, Julie" echo -en 'E[47;31m'"033[1mZ033[0m" # Red tput sgr0 echo "ane, Morris" echo read person case "$person" in # Note variable is quoted. "E" | "e" ) # Accept upper or lowercase input. echo echo "Roland Evans" echo "4321 Flash Dr." echo "Hardscrabble, CO 80753" echo "(303) 734-9874" echo "(303) 734-9892 fax" echo "revans@zzy.net" echo "Business partner & old friend" ;; "J" | "j" ) echo echo "Mildred Jones" echo "249 E. 7th St., Apt. 19" echo "New York, NY 10009" echo "(212) 533-2814" echo "(212) 533-9972 fax" echo "milliej@loisaida.com" echo "Girlfriend" echo "Birthday: Feb. 11" ;; # Add info for Smith & Zane later. * ) # Default option. # Empty input (hitting RETURN) fits here, too. echo echo "Not yet in database." ;; esac tput sgr0 # Reset colors to "normal." Chapter 33. Miscellany 493
- 500. Advanced Bash-Scripting Guide echo exit 0 Example 33-12. Drawing a box #!/bin/bash # Draw-box.sh: Drawing a box using ASCII characters. # Script by Stefano Palmeri, with minor editing by document author. # Minor edits suggested by Jim Angstadt. # Used in the ABS Guide with permission. ###################################################################### ### draw_box function doc ### # The "draw_box" function lets the user #+ draw a box in a terminal. # # Usage: draw_box ROW COLUMN HEIGHT WIDTH [COLOR] # ROW and COLUMN represent the position #+ of the upper left angle of the box you're going to draw. # ROW and COLUMN must be greater than 0 #+ and less than current terminal dimension. # HEIGHT is the number of rows of the box, and must be > 0. # HEIGHT + ROW must be <= than current terminal height. # WIDTH is the number of columns of the box and must be > 0. # WIDTH + COLUMN must be <= than current terminal width. # # E.g.: If your terminal dimension is 20x80, # draw_box 2 3 10 45 is good # draw_box 2 3 19 45 has bad HEIGHT value (19+2 > 20) # draw_box 2 3 18 78 has bad WIDTH value (78+3 > 80) # # COLOR is the color of the box frame. # This is the 5th argument and is optional. # 0=black 1=red 2=green 3=tan 4=blue 5=purple 6=cyan 7=white. # If you pass the function bad arguments, #+ it will just exit with code 65, #+ and no messages will be printed on stderr. # # Clear the terminal before you start to draw a box. # The clear command is not contained within the function. # This allows the user to draw multiple boxes, even overlapping ones. ### end of draw_box function doc ### ###################################################################### draw_box(){ #=============# HORZ="-" VERT="|" CORNER_CHAR="+" MINARGS=4 E_BADARGS=65 #=============# Chapter 33. Miscellany 494
- 501. Advanced Bash-Scripting Guide if [ $# -lt "$MINARGS" ]; then # If args are less than 4, exit. exit $E_BADARGS fi # Looking for non digit chars in arguments. # Probably it could be done better (exercise for the reader?). if echo $@ | tr -d [:blank:] | tr -d [:digit:] | grep . &> /dev/null; then exit $E_BADARGS fi BOX_HEIGHT=`expr $3 - 1` # -1 correction needed because angle char "+" BOX_WIDTH=`expr $4 - 1` #+ is a part of both box height and width. T_ROWS=`tput lines` # Define current terminal dimension T_COLS=`tput cols` #+ in rows and columns. if [ $1 -lt 1 ] || [ $1 -gt $T_ROWS ]; then # Start checking if arguments exit $E_BADARGS #+ are correct. fi if [ $2 -lt 1 ] || [ $2 -gt $T_COLS ]; then exit $E_BADARGS fi if [ `expr $1 + $BOX_HEIGHT + 1` -gt $T_ROWS ]; then exit $E_BADARGS fi if [ `expr $2 + $BOX_WIDTH + 1` -gt $T_COLS ]; then exit $E_BADARGS fi if [ $3 -lt 1 ] || [ $4 -lt 1 ]; then exit $E_BADARGS fi # End checking arguments. plot_char(){ # Function within a function. echo -e "E[${1};${2}H"$3 } echo -ne "E[3${5}m" # Set box frame color, if defined. # start drawing the box count=1 # Draw vertical lines using for (( r=$1; count<=$BOX_HEIGHT; r++)); do #+ plot_char function. plot_char $r $2 $VERT let count=count+1 done count=1 c=`expr $2 + $BOX_WIDTH` for (( r=$1; count<=$BOX_HEIGHT; r++)); do plot_char $r $c $VERT let count=count+1 done count=1 # Draw horizontal lines using for (( c=$2; count<=$BOX_WIDTH; c++)); do #+ plot_char function. plot_char $1 $c $HORZ let count=count+1 done count=1 r=`expr $1 + $BOX_HEIGHT` for (( c=$2; count<=$BOX_WIDTH; c++)); do plot_char $r $c $HORZ Chapter 33. Miscellany 495
- 502. Advanced Bash-Scripting Guide let count=count+1 done plot_char $1 $2 $CORNER_CHAR # Draw box angles. plot_char $1 `expr $2 + $BOX_WIDTH` $CORNER_CHAR plot_char `expr $1 + $BOX_HEIGHT` $2 $CORNER_CHAR plot_char `expr $1 + $BOX_HEIGHT` `expr $2 + $BOX_WIDTH` $CORNER_CHAR echo -ne "E[0m" # Restore old colors. P_ROWS=`expr $T_ROWS - 1` # Put the prompt at bottom of the terminal. echo -e "E[${P_ROWS};1H" } # Now, let's try drawing a box. clear # Clear the terminal. R=2 # Row C=3 # Column H=10 # Height W=45 # Width col=1 # Color (red) draw_box $R $C $H $W $col # Draw the box. exit 0 # Exercise: # -------- # Add the option of printing text within the drawn box. The simplest, and perhaps most useful ANSI escape sequence is bold text, 033[1m ... 033[0m. The 033 represents an escape, the "[1" turns on the bold attribute, while the "[0" switches it off. The "m" terminates each term of the escape sequence. bash$ echo -e "033[1mThis is bold text.033[0m" A similar escape sequence switches on the underline attribute (on an rxvt and an aterm). bash$ echo -e "033[4mThis is underlined text.033[0m" With an echo, the -e option enables the escape sequences. Other escape sequences change the text and/or background color. bash$ echo -e 'E[34;47mThis prints in blue.'; tput sgr0 bash$ echo -e 'E[33;44m'"yellow text on blue background"; tput sgr0 bash$ echo -e 'E[1;33;44m'"BOLD yellow text on blue background"; tput sgr0 It's usually advisable to set the bold attribute for light-colored foreground text. The tput sgr0 restores the terminal settings to normal. Omitting this lets all subsequent output from that particular terminal remain blue. Chapter 33. Miscellany 496
- 503. Advanced Bash-Scripting Guide Since tput sgr0 fails to restore terminal settings under certain circumstances, echo -ne E[0m may be a better choice. Use the following template for writing colored text on a colored background. echo -e 'E[COLOR1;COLOR2mSome text goes here.' The "E[" begins the escape sequence. The semicolon-separated numbers "COLOR1" and "COLOR2" specify a foreground and a background color, according to the table below. (The order of the numbers does not matter, since the foreground and background numbers fall in non-overlapping ranges.) The "m" terminates the escape sequence, and the text begins immediately after that. Note also that single quotes enclose the remainder of the command sequence following the echo -e. The numbers in the following table work for an rxvt terminal. Results may vary for other terminal emulators. Table 33-2. Numbers representing colors in Escape Sequences Color Foreground Background black 30 40 red 31 41 green 32 42 yellow 33 43 blue 34 44 magenta 35 45 cyan 36 46 white 37 47 Example 33-13. Echoing colored text #!/bin/bash # color-echo.sh: Echoing text messages in color. # Modify this script for your own purposes. # It's easier than hand-coding color. black='E[30;47m' red='E[31;47m' green='E[32;47m' yellow='E[33;47m' blue='E[34;47m' magenta='E[35;47m' cyan='E[36;47m' white='E[37;47m' alias Reset="tput sgr0" # Reset text attributes to normal #+ without clearing screen. Chapter 33. Miscellany 497
- 504. Advanced Bash-Scripting Guide cecho () # Color-echo. # Argument $1 = message # Argument $2 = color { local default_msg="No message passed." # Doesn't really need to be a local variable. message=${1:-$default_msg} # Defaults to default message. color=${2:-$black} # Defaults to black, if not specified. echo -e "$color" echo "$message" Reset # Reset to normal. return } # Now, let's try it out. # ---------------------------------------------------- cecho "Feeling blue..." $blue cecho "Magenta looks more like purple." $magenta cecho "Green with envy." $green cecho "Seeing red?" $red cecho "Cyan, more familiarly known as aqua." $cyan cecho "No color passed (defaults to black)." # Missing $color argument. cecho ""Empty" color passed (defaults to black)." "" # Empty $color argument. cecho # Missing $message and $color arguments. cecho "" "" # Empty $message and $color arguments. # ---------------------------------------------------- echo exit 0 # Exercises: # --------- # 1) Add the "bold" attribute to the 'cecho ()' function. # 2) Add options for colored backgrounds. Example 33-14. A "horserace" game #!/bin/bash # horserace.sh: Very simple horserace simulation. # Author: Stefano Palmeri # Used with permission. ################################################################ # Goals of the script: # playing with escape sequences and terminal colors. # # Exercise: # Edit the script to make it run less randomly, #+ set up a fake betting shop . . . # Um . . . um . . . it's starting to remind me of a movie . . . Chapter 33. Miscellany 498
- 505. Advanced Bash-Scripting Guide # # The script gives each horse a random handicap. # The odds are calculated upon horse handicap #+ and are expressed in European(?) style. # E.g., odds=3.75 means that if you bet $1 and win, #+ you receive $3.75. # # The script has been tested with a GNU/Linux OS, #+ using xterm and rxvt, and konsole. # On a machine with an AMD 900 MHz processor, #+ the average race time is 75 seconds. # On faster computers the race time would be lower. # So, if you want more suspense, reset the USLEEP_ARG variable. # # Script by Stefano Palmeri. ################################################################ E_RUNERR=65 # Check if md5sum and bc are installed. if ! which bc &> /dev/null; then echo bc is not installed. echo "Can't run . . . " exit $E_RUNERR fi if ! which md5sum &> /dev/null; then echo md5sum is not installed. echo "Can't run . . . " exit $E_RUNERR fi # Set the following variable to slow down script execution. # It will be passed as the argument for usleep (man usleep) #+ and is expressed in microseconds (500000 = half a second). USLEEP_ARG=0 # Clean up the temp directory, restore terminal cursor and #+ terminal colors -- if script interrupted by Ctl-C. trap 'echo -en "E[?25h"; echo -en "E[0m"; stty echo; tput cup 20 0; rm -fr $HORSE_RACE_TMP_DIR' TERM EXIT # See the chapter on debugging for an explanation of 'trap.' # Set a unique (paranoid) name for the temp directory the script needs. HORSE_RACE_TMP_DIR=$HOME/.horserace-`date +%s`-`head -c10 /dev/urandom | md5sum | head -c30` # Create the temp directory and move right in. mkdir $HORSE_RACE_TMP_DIR cd $HORSE_RACE_TMP_DIR # This function moves the cursor to line $1 column $2 and then prints $3. # E.g.: "move_and_echo 5 10 linux" is equivalent to #+ "tput cup 4 9; echo linux", but with one command instead of two. # Note: "tput cup" defines 0 0 the upper left angle of the terminal, #+ echo defines 1 1 the upper left angle of the terminal. move_and_echo() { echo -ne "E[${1};${2}H""$3" } # Function to generate a pseudo-random number between 1 and 9. random_1_9 () Chapter 33. Miscellany 499
- 506. Advanced Bash-Scripting Guide { head -c10 /dev/urandom | md5sum | tr -d [a-z] | tr -d 0 | cut -c1 } # Two functions that simulate "movement," when drawing the horses. draw_horse_one() { echo -n " "//$MOVE_HORSE// } draw_horse_two(){ echo -n " "$MOVE_HORSE } # Define current terminal dimension. N_COLS=`tput cols` N_LINES=`tput lines` # Need at least a 20-LINES X 80-COLUMNS terminal. Check it. if [ $N_COLS -lt 80 ] || [ $N_LINES -lt 20 ]; then echo "`basename $0` needs a 80-cols X 20-lines terminal." echo "Your terminal is ${N_COLS}-cols X ${N_LINES}-lines." exit $E_RUNERR fi # Start drawing the race field. # Need a string of 80 chars. See below. BLANK80=`seq -s "" 100 | head -c80` clear # Set foreground and background colors to white. echo -ne 'E[37;47m' # Move the cursor on the upper left angle of the terminal. tput cup 0 0 # Draw six white lines. for n in `seq 5`; do echo $BLANK80 # Use the 80 chars string to colorize the terminal. done # Sets foreground color to black. echo -ne 'E[30m' move_and_echo 3 1 "START 1" move_and_echo 3 75 FINISH move_and_echo 1 5 "|" move_and_echo 1 80 "|" move_and_echo 2 5 "|" move_and_echo 2 80 "|" move_and_echo 4 5 "| 2" move_and_echo 4 80 "|" move_and_echo 5 5 "V 3" move_and_echo 5 80 "V" # Set foreground color to red. echo -ne 'E[31m' # Some ASCII art. move_and_echo 1 8 "..@@@..@@@@@...@@@@@.@...@..@@@@..." Chapter 33. Miscellany 500
- 507. Advanced Bash-Scripting Guide move_and_echo 2 8 ".@...@...@.......@...@...@.@......." move_and_echo 3 8 ".@@@@@...@.......@...@@@@@.@@@@...." move_and_echo 4 8 ".@...@...@.......@...@...@.@......." move_and_echo 5 8 ".@...@...@.......@...@...@..@@@@..." move_and_echo 1 43 "@@@@...@@@...@@@@..@@@@..@@@@." move_and_echo 2 43 "@...@.@...@.@.....@.....@....." move_and_echo 3 43 "@@@@..@@@@@.@.....@@@@...@@@.." move_and_echo 4 43 "@..@..@...@.@.....@.........@." move_and_echo 5 43 "@...@.@...@..@@@@..@@@@.@@@@.." # Set foreground and background colors to green. echo -ne 'E[32;42m' # Draw eleven green lines. tput cup 5 0 for n in `seq 11`; do echo $BLANK80 done # Set foreground color to black. echo -ne 'E[30m' tput cup 5 0 # Draw the fences. echo "++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++" tput cup 15 0 echo "++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++++++++++++++" # Set foreground and background colors to white. echo -ne 'E[37;47m' # Draw three white lines. for n in `seq 3`; do echo $BLANK80 done # Set foreground color to black. echo -ne 'E[30m' # Create 9 files to stores handicaps. for n in `seq 10 7 68`; do touch $n done # Set the first type of "horse" the script will draw. HORSE_TYPE=2 # Create position-file and odds-file for every "horse". #+ In these files, store the current position of the horse, #+ the type and the odds. for HN in `seq 9`; do touch horse_${HN}_position touch odds_${HN} echo -1 > horse_${HN}_position echo $HORSE_TYPE >> horse_${HN}_position # Define a random handicap for horse. HANDICAP=`random_1_9` # Check if the random_1_9 function returned a good value. Chapter 33. Miscellany 501
- 508. Advanced Bash-Scripting Guide while ! echo $HANDICAP | grep [1-9] &> /dev/null; do HANDICAP=`random_1_9` done # Define last handicap position for horse. LHP=`expr $HANDICAP * 7 + 3` for FILE in `seq 10 7 $LHP`; do echo $HN >> $FILE done # Calculate odds. case $HANDICAP in 1) ODDS=`echo $HANDICAP * 0.25 + 1.25 | bc` echo $ODDS > odds_${HN} ;; 2 | 3) ODDS=`echo $HANDICAP * 0.40 + 1.25 | bc` echo $ODDS > odds_${HN} ;; 4 | 5 | 6) ODDS=`echo $HANDICAP * 0.55 + 1.25 | bc` echo $ODDS > odds_${HN} ;; 7 | 8) ODDS=`echo $HANDICAP * 0.75 + 1.25 | bc` echo $ODDS > odds_${HN} ;; 9) ODDS=`echo $HANDICAP * 0.90 + 1.25 | bc` echo $ODDS > odds_${HN} esac done # Print odds. print_odds() { tput cup 6 0 echo -ne 'E[30;42m' for HN in `seq 9`; do echo "#$HN odds->" `cat odds_${HN}` done } # Draw the horses at starting line. draw_horses() { tput cup 6 0 echo -ne 'E[30;42m' for HN in `seq 9`; do echo /$HN/" " done } print_odds echo -ne 'E[47m' # Wait for a enter key press to start the race. # The escape sequence 'E[?25l' disables the cursor. tput cup 17 0 echo -e 'E[?25l'Press [enter] key to start the race... read -s # Disable normal echoing in the terminal. # This avoids key presses that might "contaminate" the screen #+ during the race. stty -echo Chapter 33. Miscellany 502
- 509. Advanced Bash-Scripting Guide # -------------------------------------------------------- # Start the race. draw_horses echo -ne 'E[37;47m' move_and_echo 18 1 $BLANK80 echo -ne 'E[30m' move_and_echo 18 1 Starting... sleep 1 # Set the column of the finish line. WINNING_POS=74 # Define the time the race started. START_TIME=`date +%s` # COL variable needed by following "while" construct. COL=0 while [ $COL -lt $WINNING_POS ]; do MOVE_HORSE=0 # Check if the random_1_9 function has returned a good value. while ! echo $MOVE_HORSE | grep [1-9] &> /dev/null; do MOVE_HORSE=`random_1_9` done # Define old type and position of the "randomized horse". HORSE_TYPE=`cat horse_${MOVE_HORSE}_position | tail -n 1` COL=$(expr `cat horse_${MOVE_HORSE}_position | head -n 1`) ADD_POS=1 # Check if the current position is an handicap position. if seq 10 7 68 | grep -w $COL &> /dev/null; then if grep -w $MOVE_HORSE $COL &> /dev/null; then ADD_POS=0 grep -v -w $MOVE_HORSE $COL > ${COL}_new rm -f $COL mv -f ${COL}_new $COL else ADD_POS=1 fi else ADD_POS=1 fi COL=`expr $COL + $ADD_POS` echo $COL > horse_${MOVE_HORSE}_position # Store new position. # Choose the type of horse to draw. case $HORSE_TYPE in 1) HORSE_TYPE=2; DRAW_HORSE=draw_horse_two ;; 2) HORSE_TYPE=1; DRAW_HORSE=draw_horse_one esac echo $HORSE_TYPE >> horse_${MOVE_HORSE}_position # Store current type. # Set foreground color to black and background to green. echo -ne 'E[30;42m' # Move the cursor to new horse position. tput cup `expr $MOVE_HORSE + 5` Chapter 33. Miscellany 503
- 510. Advanced Bash-Scripting Guide `cat horse_${MOVE_HORSE}_position | head -n 1` # Draw the horse. $DRAW_HORSE usleep $USLEEP_ARG # When all horses have gone beyond field line 15, reprint odds. touch fieldline15 if [ $COL = 15 ]; then echo $MOVE_HORSE >> fieldline15 fi if [ `wc -l fieldline15 | cut -f1 -d " "` = 9 ]; then print_odds : > fieldline15 fi # Define the leading horse. HIGHEST_POS=`cat *position | sort -n | tail -1` # Set background color to white. echo -ne 'E[47m' tput cup 17 0 echo -n Current leader: `grep -w $HIGHEST_POS *position | cut -c7` " " done # Define the time the race finished. FINISH_TIME=`date +%s` # Set background color to green and enable blinking text. echo -ne 'E[30;42m' echo -en 'E[5m' # Make the winning horse blink. tput cup `expr $MOVE_HORSE + 5` `cat horse_${MOVE_HORSE}_position | head -n 1` $DRAW_HORSE # Disable blinking text. echo -en 'E[25m' # Set foreground and background color to white. echo -ne 'E[37;47m' move_and_echo 18 1 $BLANK80 # Set foreground color to black. echo -ne 'E[30m' # Make winner blink. tput cup 17 0 echo -e "E[5mWINNER: $MOVE_HORSEE[25m"" Odds: `cat odds_${MOVE_HORSE}`" " Race time: `expr $FINISH_TIME - $START_TIME` secs" # Restore cursor and old colors. echo -en "E[?25h" echo -en "E[0m" # Restore echoing. stty echo # Remove race temp directory. Chapter 33. Miscellany 504
- 511. Advanced Bash-Scripting Guide rm -rf $HORSE_RACE_TMP_DIR tput cup 19 0 exit 0 See also Example A-21, Example A-44, Example A-52, and Example A-40. There is, however, a major problem with all this. ANSI escape sequences are emphatically non-portable. What works fine on some terminal emulators (or the console) may work differently, or not at all, on others. A "colorized" script that looks stunning on the script author's machine may produce unreadable output on someone else's. This somewhat compromises the usefulness of colorizing scripts, and possibly relegates this technique to the status of a gimmick. Colorized scripts are probably inappropriate in a commercial setting, i.e., your supervisor might disapprove. Moshe Jacobson's color utility (http://runslinux.net/projects.html#color) considerably simplifies using ANSI escape sequences. It substitutes a clean and logical syntax for the clumsy constructs just discussed. Henry/teikedvl has likewise created a utility (http://scriptechocolor.sourceforge.net/) to simplify creation of colorized scripts. 33.7. Optimizations Most shell scripts are quick 'n dirty solutions to non-complex problems. As such, optimizing them for speed is not much of an issue. Consider the case, though, where a script carries out an important task, does it well, but runs too slowly. Rewriting it in a compiled language may not be a palatable option. The simplest fix would be to rewrite the parts of the script that slow it down. Is it possible to apply principles of code optimization even to a lowly shell script? Check the loops in the script. Time consumed by repetitive operations adds up quickly. If at all possible, remove time-consuming operations from within loops. Use builtin commands in preference to system commands. Builtins execute faster and usually do not launch a subshell when invoked. Avoid unnecessary commands, particularly in a pipe. cat "$file" | grep "$word" grep "$word" "$file" # The above command-lines have an identical effect, #+ but the second runs faster since it launches one fewer subprocess. The cat command seems especially prone to overuse in scripts. Use the time and times tools to profile computation-intensive commands. Consider rewriting time-critical code sections in C, or even in assembler. Try to minimize file I/O. Bash is not particularly efficient at handling files, so consider using more appropriate tools for this within the script, such as awk or Perl. Write your scripts in a modular and coherent form, [116] so they can be reorganized and tightened up as Chapter 33. Miscellany 505
- 512. Advanced Bash-Scripting Guide necessary. Some of the optimization techniques applicable to high-level languages may work for scripts, but others, such as loop unrolling, are mostly irrelevant. Above all, use common sense. For an excellent demonstration of how optimization can dramatically reduce the execution time of a script, see Example 15-47. 33.8. Assorted Tips 33.8.1. Ideas for more powerful scripts • You have a problem that you want to solve by writing a Bash script. Unfortunately, you don't know quite where to start. One method is to plunge right in and code those parts of the script that come easily, and write the hard parts as pseudo-code. #!/bin/bash ARGCOUNT=1 # Need name as argument. E_WRONGARGS=65 if [ number-of-arguments is-not-equal-to "$ARGCOUNT" ] # ^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^ # Can't figure out how to code this . . . #+ . . . so write it in pseudo-code. then echo "Usage: name-of-script name" # ^^^^^^^^^^^^^^ More pseudo-code. exit $E_WRONGARGS fi . . . exit 0 # Later on, substitute working code for the pseudo-code. # Line 6 becomes: if [ $# -ne "$ARGCOUNT" ] # Line 12 becomes: echo "Usage: `basename $0` name" For an example of using pseudo-code, see the Square Root exercise. • To keep a record of which user scripts have run during a particular session or over a number of sessions, add the following lines to each script you want to keep track of. This will keep a continuing file record of the script names and invocation times. # Append (>>) following to end of each script tracked. whoami>> $SAVE_FILE # User invoking the script. echo $0>> $SAVE_FILE # Script name. date>> $SAVE_FILE # Date and time. echo>> $SAVE_FILE # Blank line as separator. Chapter 33. Miscellany 506
- 513. Advanced Bash-Scripting Guide # Of course, SAVE_FILE defined and exported as environmental variable in ~/.bashrc #+ (something like ~/.scripts-run) • The >> operator appends lines to a file. What if you wish to prepend a line to an existing file, that is, to paste it in at the beginning? file=data.txt title="***This is the title line of data text file***" echo $title | cat - $file >$file.new # "cat -" concatenates stdout to $file. # End result is #+ to write a new file with $title appended at *beginning*. This is a simplified variant of the Example 18-13 script given earlier. And, of course, sed can also do this. • A shell script may act as an embedded command inside another shell script, a Tcl or wish script, or even a Makefile. It can be invoked as an external shell command in a C program using the system() call, i.e., system("script_name");. • Setting a variable to the contents of an embedded sed or awk script increases the readability of the surrounding shell wrapper. See Example A-1 and Example 14-20. • Put together files containing your favorite and most useful definitions and functions. As necessary, "include" one or more of these "library files" in scripts with either the dot (.) or source command. # SCRIPT LIBRARY # ------ ------- # Note: # No "#!" here. # No "live code" either. # Useful variable definitions ROOT_UID=0 # Root has $UID 0. E_NOTROOT=101 # Not root user error. MAXRETVAL=255 # Maximum (positive) return value of a function. SUCCESS=0 FAILURE=-1 # Functions Usage () # "Usage:" message. { if [ -z "$1" ] # No arg passed. then msg=filename else msg=$@ fi echo "Usage: `basename $0` "$msg"" } Chapter 33. Miscellany 507
- 514. Advanced Bash-Scripting Guide Check_if_root () # Check if root running script. { # From "ex39.sh" example. if [ "$UID" -ne "$ROOT_UID" ] then echo "Must be root to run this script." exit $E_NOTROOT fi } CreateTempfileName () # Creates a "unique" temp filename. { # From "ex51.sh" example. prefix=temp suffix=`eval date +%s` Tempfilename=$prefix.$suffix } isalpha2 () # Tests whether *entire string* is alphabetic. { # From "isalpha.sh" example. [ $# -eq 1 ] || return $FAILURE case $1 in *[!a-zA-Z]*|"") return $FAILURE;; *) return $SUCCESS;; esac # Thanks, S.C. } abs () # Absolute value. { # Caution: Max return value = 255. E_ARGERR=-999999 if [ -z "$1" ] # Need arg passed. then return $E_ARGERR # Obvious error value returned. fi if [ "$1" -ge 0 ] # If non-negative, then # absval=$1 # stays as-is. else # Otherwise, let "absval = (( 0 - $1 ))" # change sign. fi return $absval } tolower () # Converts string(s) passed as argument(s) { #+ to lowercase. if [ -z "$1" ] # If no argument(s) passed, then #+ send error message echo "(null)" #+ (C-style void-pointer error message) return #+ and return from function. fi echo "$@" | tr A-Z a-z # Translate all passed arguments ($@). Chapter 33. Miscellany 508
- 515. Advanced Bash-Scripting Guide return # Use command substitution to set a variable to function output. # For example: # oldvar="A seT of miXed-caSe LEtTerS" # newvar=`tolower "$oldvar"` # echo "$newvar" # a set of mixed-case letters # # Exercise: Rewrite this function to change lowercase passed argument(s) # to uppercase ... toupper() [easy]. } • Use special-purpose comment headers to increase clarity and legibility in scripts. ## Caution. rm -rf *.zzy ## The "-rf" options to "rm" are very dangerous, ##+ especially with wild cards. #+ Line continuation. # This is line 1 #+ of a multi-line comment, #+ and this is the final line. #* Note. #o List item. #> Another point of view. while [ "$var1" != "end" ] #> while test "$var1" != "end" • Dotan Barak contributes template code for a progress bar in a script. Example 33-15. A Progress Bar #!/bin/bash # progress-bar.sh # Author: Dotan Barak (very minor revisions by ABS Guide author). # Used in ABS Guide with permission (thanks!). BAR_WIDTH=50 BAR_CHAR_START="[" BAR_CHAR_END="]" BAR_CHAR_EMPTY="." BAR_CHAR_FULL="=" BRACKET_CHARS=2 LIMIT=100 print_progress_bar() { # Calculate how many characters will be full. let "full_limit = ((($1 - $BRACKET_CHARS) * $2) / $LIMIT)" # Calculate how many characters will be empty. let "empty_limit = ($1 - $BRACKET_CHARS) - ${full_limit}" # Prepare the bar. Chapter 33. Miscellany 509
- 516. Advanced Bash-Scripting Guide bar_line="${BAR_CHAR_START}" for ((j=0; j<full_limit; j++)); do bar_line="${bar_line}${BAR_CHAR_FULL}" done for ((j=0; j<empty_limit; j++)); do bar_line="${bar_line}${BAR_CHAR_EMPTY}" done bar_line="${bar_line}${BAR_CHAR_END}" printf "%3d%% %s" $2 ${bar_line} } # Here is a sample of code that uses it. MAX_PERCENT=100 for ((i=0; i<=MAX_PERCENT; i++)); do # usleep 10000 # ... Or run some other commands ... # print_progress_bar ${BAR_WIDTH} ${i} echo -en "r" done echo "" exit • A particularly clever use of if-test constructs is for comment blocks. #!/bin/bash COMMENT_BLOCK= # Try setting the above variable to some value #+ for an unpleasant surprise. if [ $COMMENT_BLOCK ]; then Comment block -- ================================= This is a comment line. This is another comment line. This is yet another comment line. ================================= echo "This will not echo." Comment blocks are error-free! Whee! fi echo "No more comments, please." exit 0 Compare this with using here documents to comment out code blocks. • Using the $? exit status variable, a script may test if a parameter contains only digits, so it can be treated as an integer. Chapter 33. Miscellany 510
- 517. Advanced Bash-Scripting Guide #!/bin/bash SUCCESS=0 E_BADINPUT=85 test "$1" -ne 0 -o "$1" -eq 0 2>/dev/null # An integer is either equal to 0 or not equal to 0. # 2>/dev/null suppresses error message. if [ $? -ne "$SUCCESS" ] then echo "Usage: `basename $0` integer-input" exit $E_BADINPUT fi let "sum = $1 + 25" # Would give error if $1 not integer. echo "Sum = $sum" # Any variable, not just a command-line parameter, can be tested this way. exit 0 • The 0 - 255 range for function return values is a severe limitation. Global variables and other workarounds are often problematic. An alternative method for a function to communicate a value back to the main body of the script is to have the function write to stdout (usually with echo) the "return value," and assign this to a variable. This is actually a variant of command substitution. Example 33-16. Return value trickery #!/bin/bash # multiplication.sh multiply () # Multiplies params passed. { # Will accept a variable number of args. local product=1 until [ -z "$1" ] # Until uses up arguments passed... do let "product *= $1" shift done echo $product # Will not echo to stdout, } #+ since this will be assigned to a variable. mult1=15383; mult2=25211 val1=`multiply $mult1 $mult2` echo "$mult1 X $mult2 = $val1" # 387820813 mult1=25; mult2=5; mult3=20 val2=`multiply $mult1 $mult2 $mult3` echo "$mult1 X $mult2 X $mult3 = $val2" # 2500 mult1=188; mult2=37; mult3=25; mult4=47 val3=`multiply $mult1 $mult2 $mult3 $mult4` echo "$mult1 X $mult2 X $mult3 X $mult4 = $val3" # 8173300 Chapter 33. Miscellany 511
- 518. Advanced Bash-Scripting Guide exit 0 The same technique also works for alphanumeric strings. This means that a function can "return" a non-numeric value. capitalize_ichar () # Capitalizes initial character { #+ of argument string(s) passed. string0="$@" # Accepts multiple arguments. firstchar=${string0:0:1} # First character. string1=${string0:1} # Rest of string(s). FirstChar=`echo "$firstchar" | tr a-z A-Z` # Capitalize first character. echo "$FirstChar$string1" # Output to stdout. } newstring=`capitalize_ichar "every sentence should start with a capital letter."` echo "$newstring" # Every sentence should start with a capital letter. It is even possible for a function to "return" multiple values with this method. Example 33-17. Even more return value trickery #!/bin/bash # sum-product.sh # A function may "return" more than one value. sum_and_product () # Calculates both sum and product of passed args. { echo $(( $1 + $2 )) $(( $1 * $2 )) # Echoes to stdout each calculated value, separated by space. } echo echo "Enter first number " read first echo echo "Enter second number " read second echo retval=`sum_and_product $first $second` # Assigns output of function. sum=`echo "$retval" | awk '{print $1}'` # Assigns first field. product=`echo "$retval" | awk '{print $2}'` # Assigns second field. echo "$first + $second = $sum" echo "$first * $second = $product" echo exit 0 There can be only one echo statement in the function for this to work. If you alter the previous example: Chapter 33. Miscellany 512
- 519. Advanced Bash-Scripting Guide sum_and_product () { echo "This is the sum_and_product function." # This messes things up! echo $(( $1 + $2 )) $(( $1 * $2 )) } ... retval=`sum_and_product $first $second` # Assigns output of function. # Now, this will not work correctly. • Next in our bag of tricks are techniques for passing an array to a function, then "returning" an array back to the main body of the script. Passing an array involves loading the space-separated elements of the array into a variable with command substitution. Getting an array back as the "return value" from a function uses the previously mentioned strategem of echoing the array in the function, then invoking command substitution and the ( ... ) operator to assign it to an array. Example 33-18. Passing and returning arrays #!/bin/bash # array-function.sh: Passing an array to a function and ... # "returning" an array from a function Pass_Array () { local passed_array # Local variable! passed_array=( `echo "$1"` ) echo "${passed_array[@]}" # List all the elements of the new array #+ declared and set within the function. } original_array=( element1 element2 element3 element4 element5 ) echo echo "original_array = ${original_array[@]}" # List all elements of original array. # This is the trick that permits passing an array to a function. # ********************************** argument=`echo ${original_array[@]}` # ********************************** # Pack a variable #+ with all the space-separated elements of the original array. # # Attempting to just pass the array itself will not work. # This is the trick that allows grabbing an array as a "return value". # ***************************************** returned_array=( `Pass_Array "$argument"` ) # ***************************************** # Assign 'echoed' output of function to array variable. echo "returned_array = ${returned_array[@]}" Chapter 33. Miscellany 513
- 520. Advanced Bash-Scripting Guide echo "=============================================================" # Now, try it again, #+ attempting to access (list) the array from outside the function. Pass_Array "$argument" # The function itself lists the array, but ... #+ accessing the array from outside the function is forbidden. echo "Passed array (within function) = ${passed_array[@]}" # NULL VALUE since the array is a variable local to the function. echo ############################################ # And here is an even more explicit example: ret_array () { for element in {11..20} do echo "$element " # Echo individual elements done #+ of what will be assembled into an array. } arr=( $(ret_array) ) # Assemble into array. echo "Capturing array "arr" from function ret_array () ..." echo "Third element of array "arr" is ${arr[2]}." # 13 (zero-indexed) echo -n "Entire array is: " echo ${arr[@]} # 11 12 13 14 15 16 17 18 19 20 echo exit 0 For a more elaborate example of passing arrays to functions, see Example A-10. • Using the double-parentheses construct, it is possible to use C-style syntax for setting and incrementing/decrementing variables and in for and while loops. See Example 10-12 and Example 10-17. • Setting the path and umask at the beginning of a script makes it more "portable" -- more likely to run on a "foreign" machine whose user may have bollixed up the $PATH and umask. #!/bin/bash PATH=/bin:/usr/bin:/usr/local/bin ; export PATH umask 022 # Files that the script creates will have 755 permission. # Thanks to Ian D. Allen, for this tip. • A useful scripting technique is to repeatedly feed the output of a filter (by piping) back to the same filter, but with a different set of arguments and/or options. Especially suitable for this are tr and grep. # From "wstrings.sh" example. wlist=`strings "$1" | tr A-Z a-z | tr '[:space:]' Z | tr -cs '[:alpha:]' Z | tr -s '173-377' Z | tr Z ' '` Chapter 33. Miscellany 514
- 521. Advanced Bash-Scripting Guide Example 33-19. Fun with anagrams #!/bin/bash # agram.sh: Playing games with anagrams. # Find anagrams of... LETTERSET=etaoinshrdlu FILTER='.......' # How many letters minimum? # 1234567 anagram "$LETTERSET" | # Find all anagrams of the letterset... grep "$FILTER" | # With at least 7 letters, grep '^is' | # starting with 'is' grep -v 's$' | # no plurals grep -v 'ed$' # no past tense verbs # Possible to add many combinations of conditions and filters. # Uses "anagram" utility #+ that is part of the author's "yawl" word list package. # http://ibiblio.org/pub/Linux/libs/yawl-0.3.2.tar.gz # http://bash.neuralshortcircuit.com/yawl-0.3.2.tar.gz exit 0 # End of code. bash$ sh agram.sh islander isolate isolead isotheral # Exercises: # --------- # Modify this script to take the LETTERSET as a command-line parameter. # Parameterize the filters in lines 11 - 13 (as with $FILTER), #+ so that they can be specified by passing arguments to a function. # For a slightly different approach to anagramming, #+ see the agram2.sh script. See also Example 27-4, Example 15-25, and Example A-9. • Use "anonymous here documents" to comment out blocks of code, to save having to individually comment out each line with a #. See Example 18-11. • Running a script on a machine that relies on a command that might not be installed is dangerous. Use whatis to avoid potential problems with this. CMD=command1 # First choice. PlanB=command2 # Fallback option. command_test=$(whatis "$CMD" | grep 'nothing appropriate') # If 'command1' not found on system , 'whatis' will return #+ "command1: nothing appropriate." # # A safer alternative is: # command_test=$(whereis "$CMD" | grep /) # But then the sense of the following test would have to be reversed, #+ since the $command_test variable holds content only if Chapter 33. Miscellany 515
- 522. Advanced Bash-Scripting Guide #+ the $CMD exists on the system. # (Thanks, bojster.) if [[ -z "$command_test" ]] # Check whether command present. then $CMD option1 option2 # Run command1 with options. else # Otherwise, $PlanB #+ run command2. fi • An if-grep test may not return expected results in an error case, when text is output to stderr, rather that stdout. if ls -l nonexistent_filename | grep -q 'No such file or directory' then echo "File "nonexistent_filename" does not exist." fi Redirecting stderr to stdout fixes this. if ls -l nonexistent_filename 2>&1 | grep -q 'No such file or directory' # ^^^^ then echo "File "nonexistent_filename" does not exist." fi # Thanks, Chris Martin, for pointing this out. • If you absolutely must access a subshell variable outside the subshell, here's a way to do it. TMPFILE=tmpfile # Create a temp file to store the variable. ( # Inside the subshell ... inner_variable=Inner echo $inner_variable echo $inner_variable >>$TMPFILE # Append to temp file. ) # Outside the subshell ... echo; echo "-----"; echo echo $inner_variable # Null, as expected. echo "-----"; echo # Now ... read inner_variable <$TMPFILE # Read back shell variable. rm -f "$TMPFILE" # Get rid of temp file. echo "$inner_variable" # It's an ugly kludge, but it works. • The run-parts command is handy for running a set of command scripts in a particular sequence, especially in combination with cron or at. • For doing multiple revisions on a complex script, use the rcs Revision Control System package. Among other benefits of this is automatically updated ID header tags. The co command in rcs does a parameter replacement of certain reserved key words, for example, replacing # $Id$ in a script with something like: # $Id: hello-world.sh,v 1.1 2004/10/16 02:43:05 bozo Exp $ Chapter 33. Miscellany 516
- 523. Advanced Bash-Scripting Guide 33.8.2. Widgets It would be nice to be able to invoke X-Windows widgets from a shell script. There happen to exist several packages that purport to do so, namely Xscript, Xmenu, and widtools. The first two of these no longer seem to be maintained. Fortunately, it is still possible to obtain widtools here. The widtools (widget tools) package requires the XForms library to be installed. Additionally, the Makefile needs some judicious editing before the package will build on a typical Linux system. Finally, three of the six widgets offered do not work (and, in fact, segfault). The dialog family of tools offers a method of calling "dialog" widgets from a shell script. The original dialog utility works in a text console, but its successors, gdialog, Xdialog, and kdialog use X-Windows-based widget sets. Example 33-20. Widgets invoked from a shell script #!/bin/bash # dialog.sh: Using 'gdialog' widgets. # Must have 'gdialog' installed on your system to run this script. # Or, you can replace all instance of 'gdialog' below with 'kdialog' ... # Version 1.1 (corrected 04/05/05) # This script was inspired by the following article. # "Scripting for X Productivity," by Marco Fioretti, # LINUX JOURNAL, Issue 113, September 2003, pp. 86-9. # Thank you, all you good people at LJ. # Input error in dialog box. E_INPUT=65 # Dimensions of display, input widgets. HEIGHT=50 WIDTH=60 # Output file name (constructed out of script name). OUTFILE=$0.output # Display this script in a text widget. gdialog --title "Displaying: $0" --textbox $0 $HEIGHT $WIDTH # Now, we'll try saving input in a file. echo -n "VARIABLE=" > $OUTFILE gdialog --title "User Input" --inputbox "Enter variable, please:" $HEIGHT $WIDTH 2>> $OUTFILE if [ "$?" -eq 0 ] # It's good practice to check exit status. then echo "Executed "dialog box" without errors." else echo "Error(s) in "dialog box" execution." Chapter 33. Miscellany 517
- 524. Advanced Bash-Scripting Guide # Or, clicked on "Cancel", instead of "OK" button. rm $OUTFILE exit $E_INPUT fi # Now, we'll retrieve and display the saved variable. . $OUTFILE # 'Source' the saved file. echo "The variable input in the "input box" was: "$VARIABLE"" rm $OUTFILE # Clean up by removing the temp file. # Some applications may need to retain this file. exit $? # Exercise: Rewrite this script using the 'zenity' widget set. The xmessage command is a simple method of popping up a message/query window. For example: xmessage Fatal error in script! -button exit The latest entry in the widget sweepstakes is zenity. This utility pops up GTK+ dialog widgets-and-windows, and it works very nicely within a script. get_info () { zenity --entry # Pops up query window . . . #+ and prints user entry to stdout. # Also try the --calendar and --scale options. } answer=$( get_info ) # Capture stdout in $answer variable. echo "User entered: "$answer"" For other methods of scripting with widgets, try Tk or wish (Tcl derivatives), PerlTk (Perl with Tk extensions), tksh (ksh with Tk extensions), XForms4Perl (Perl with XForms extensions), Gtk-Perl (Perl with Gtk extensions), or PyQt (Python with Qt extensions). 33.9. Security Issues 33.9.1. Infected Shell Scripts A brief warning about script security is indicated. A shell script may contain a worm, trojan, or even a virus. For that reason, never run as root a script (or permit it to be inserted into the system startup scripts in /etc/rc.d) unless you have obtained said script from a trusted source or you have carefully analyzed it to make certain it does nothing harmful. Various researchers at Bell Labs and other sites, including M. Douglas McIlroy, Tom Duff, and Fred Cohen have investigated the implications of shell script viruses. They conclude that it is all too easy for even a novice, a "script kiddie," to write one. [117] Here is yet another reason to learn scripting. Being able to look at and understand scripts may protect your system from being compromised by a rogue script. Chapter 33. Miscellany 518
- 525. Advanced Bash-Scripting Guide 33.9.2. Hiding Shell Script Source For security purposes, it may be necessary to render a script unreadable. If only there were a utility to create a stripped binary executable from a script. Francisco Rosales' shc -- generic shell script compiler does exactly that. Unfortunately, according to an article in the October, 2005 Linux Journal, the binary can, in at least some cases, be decrypted to recover the original script source. Still, this could be a useful method of keeping scripts secure from all but the most skilled hackers. 33.9.3. Writing Secure Shell Scripts Dan Stromberg suggests the following guidelines for writing (relatively) secure shell scripts. • Don't put secret data in environment variables. • Don't pass secret data in an external command's arguments (pass them in via a pipe or redirection instead). • Set your $PATH carefully. Don't just trust whatever path you inherit from the caller if your script is running as root. In fact, whenever you use an environment variable inherited from the caller, think about what could happen if the caller put something misleading in the variable, e.g., if the caller set $HOME to /etc. 33.10. Portability Issues It is easier to port a shell than a shell script. --Larry Wall This book deals specifically with Bash scripting on a GNU/Linux system. All the same, users of sh and ksh will find much of value here. As it happens, many of the various shells and scripting languages seem to be converging toward the POSIX 1003.2 standard. Invoking Bash with the --posix option or inserting a set -o posix at the head of a script causes Bash to conform very closely to this standard. Another alternative is to use a #!/bin/sh sha-bang header in the script, rather than #!/bin/bash. [118] Note that /bin/sh is a link to /bin/bash in Linux and certain other flavors of UNIX, and a script invoked this way disables extended Bash functionality. Most Bash scripts will run as-is under ksh, and vice-versa, since Chet Ramey has been busily porting ksh features to the latest versions of Bash. On a commercial UNIX machine, scripts using GNU-specific features of standard commands may not work. This has become less of a problem in the last few years, as the GNU utilities have pretty much displaced their proprietary counterparts even on "big-iron" UNIX. Caldera's release of the source to many of the original UNIX utilities has accelerated the trend. Bash has certain features that the traditional Bourne shell lacks. Among these are: Chapter 33. Miscellany 519
- 526. Advanced Bash-Scripting Guide • Certain extended invocation options • Command substitution using $( ) notation • Brace expansion • Certain array operations, and associative arrays • The double brackets extended test construct • The double-parentheses arithmetic-evaluation construct • Certain string manipulation operations • Process substitution • A Regular Expression matching operator • Bash-specific builtins • Coprocesses See the Bash F.A.Q. for a complete listing. 33.10.1. A Test Suite Let us illustrate some of the incompatibilities between Bash and the classic Bourne shell. Download and install the "Heirloom Bourne Shell" and run the following script, first using Bash, then the classic sh. Example 33-21. Test Suite #!/bin/bash # test-suite.sh # A partial Bash compatibility test suite. # Double brackets (test) String="Double brackets supported?" echo -n "Double brackets test: " if [[ "$String" = "Double brackets supported?" ]] then echo "PASS" else echo "FAIL" fi # Double brackets and regex matching String="Regex matching supported?" echo -n "Regex matching: " if [[ "$String" =~ R.....matching* ]] then echo "PASS" else echo "FAIL" fi # Arrays test_arr=FAIL Array=( If supports arrays will print PASS ) test_arr=${Array[5]} echo "Array test: $test_arr" # Completing this script is an exercise for the reader. Chapter 33. Miscellany 520
- 527. Advanced Bash-Scripting Guide # Add to the above similar tests for double parentheses, #+ brace expansion, $() command substitution, etc. exit $? 33.11. Shell Scripting Under Windows Even users running that other OS can run UNIX-like shell scripts, and therefore benefit from many of the lessons of this book. The Cygwin package from Cygnus and the MKS utilities from Mortice Kern Associates add shell scripting capabilities to Windows. There have been intimations that a future release of Windows will contain Bash-like command-line scripting capabilities, but that remains to be seen. Chapter 33. Miscellany 521
- 528. Chapter 34. Bash, versions 2, 3, and 4 34.1. Bash, version 2 The current version of Bash, the one you have running on your machine, is most likely version 2.xx.yy, 3.xx.yy, or 4.xx.yy. bash$ echo $BASH_VERSION 3.2.25(1)-release The version 2 update of the classic Bash scripting language added array variables, string and parameter expansion, and a better method of indirect variable references, among other features. Example 34-1. String expansion #!/bin/bash # String expansion. # Introduced with version 2 of Bash. # Strings of the form $'xxx' #+ have the standard escaped characters interpreted. echo $'Ringing bell 3 times a a a' # May only ring once with certain terminals. # Or ... # May not ring at all, depending on terminal settings. echo $'Three form feeds f f f' echo $'10 newlines nnnnnnnnnn' echo $'102141163150' # B a s h # Octal equivalent of characters. exit Example 34-2. Indirect variable references - the new way #!/bin/bash # Indirect variable referencing. # This has a few of the attributes of references in C++. a=letter_of_alphabet letter_of_alphabet=z echo "a = $a" # Direct reference. echo "Now a = ${!a}" # Indirect reference. # The ${!variable} notation is more intuitive than the old #+ eval var1=$$var2 echo Chapter 34. Bash, versions 2, 3, and 4 522
- 529. Advanced Bash-Scripting Guide t=table_cell_3 table_cell_3=24 echo "t = ${!t}" # t = 24 table_cell_3=387 echo "Value of t changed to ${!t}" # 387 # No 'eval' necessary. # This is useful for referencing members of an array or table, #+ or for simulating a multi-dimensional array. # An indexing option (analogous to pointer arithmetic) #+ would have been nice. Sigh. exit 0 # See also, ind-ref.sh example. Example 34-3. Simple database application, using indirect variable referencing #!/bin/bash # resistor-inventory.sh # Simple database / table-lookup application. # ============================================================== # # Data B1723_value=470 # Ohms B1723_powerdissip=.25 # Watts B1723_colorcode="yellow-violet-brown" # Color bands B1723_loc=173 # Where they are B1723_inventory=78 # How many B1724_value=1000 B1724_powerdissip=.25 B1724_colorcode="brown-black-red" B1724_loc=24N B1724_inventory=243 B1725_value=10000 B1725_powerdissip=.125 B1725_colorcode="brown-black-orange" B1725_loc=24N B1725_inventory=89 # ============================================================== # echo PS3='Enter catalog number: ' echo select catalog_number in "B1723" "B1724" "B1725" do Inv=${catalog_number}_inventory Val=${catalog_number}_value Pdissip=${catalog_number}_powerdissip Loc=${catalog_number}_loc Ccode=${catalog_number}_colorcode Chapter 34. Bash, versions 2, 3, and 4 523
- 530. Advanced Bash-Scripting Guide echo echo "Catalog number $catalog_number:" # Now, retrieve value, using indirect referencing. echo "There are ${!Inv} of [${!Val} ohm / ${!Pdissip} watt] resistors in stock." # ^ ^ echo "These are located in bin # ${!Loc}." echo "Their color code is "${!Ccode}"." break done echo; echo # Exercises: # --------- # 1) Rewrite this script to read its data from an external file. # 2) Rewrite this script to use arrays, #+ rather than indirect variable referencing. # Which method is more straightforward and intuitive? # Which method is easier to code? # Notes: # ----- # Shell scripts are inappropriate for anything except the most simple #+ database applications, and even then it involves workarounds and kludges. # Much better is to use a language with native support for data structures, #+ such as C++ or Java (or even Perl). exit 0 Example 34-4. Using arrays and other miscellaneous trickery to deal four random hands from a deck of cards #!/bin/bash # cards.sh # Deals four random hands from a deck of cards. UNPICKED=0 PICKED=1 DUPE_CARD=99 LOWER_LIMIT=0 UPPER_LIMIT=51 CARDS_IN_SUIT=13 CARDS=52 declare -a Deck declare -a Suits declare -a Cards # It would have been easier to implement and more intuitive #+ with a single, 3-dimensional array. # Perhaps a future version of Bash will support multidimensional arrays. initialize_Deck () { i=$LOWER_LIMIT until [ "$i" -gt $UPPER_LIMIT ] Chapter 34. Bash, versions 2, 3, and 4 524
- 531. Advanced Bash-Scripting Guide do Deck[i]=$UNPICKED # Set each card of "Deck" as unpicked. let "i += 1" done echo } initialize_Suits () { Suits[0]=C #Clubs Suits[1]=D #Diamonds Suits[2]=H #Hearts Suits[3]=S #Spades } initialize_Cards () { Cards=(2 3 4 5 6 7 8 9 10 J Q K A) # Alternate method of initializing an array. } pick_a_card () { card_number=$RANDOM let "card_number %= $CARDS" # Restrict range to 0 - 51, i.e., 52 cards. if [ "${Deck[card_number]}" -eq $UNPICKED ] then Deck[card_number]=$PICKED return $card_number else return $DUPE_CARD fi } parse_card () { number=$1 let "suit_number = number / CARDS_IN_SUIT" suit=${Suits[suit_number]} echo -n "$suit-" let "card_no = number % CARDS_IN_SUIT" Card=${Cards[card_no]} printf %-4s $Card # Print cards in neat columns. } seed_random () # Seed random number generator. { # What happens if you don't do this? seed=`eval date +%s` let "seed %= 32766" RANDOM=$seed # What are some other methods #+ of seeding the random number generator? } deal_cards () { echo cards_picked=0 while [ "$cards_picked" -le $UPPER_LIMIT ] do Chapter 34. Bash, versions 2, 3, and 4 525
- 532. Advanced Bash-Scripting Guide pick_a_card t=$? if [ "$t" -ne $DUPE_CARD ] then parse_card $t u=$cards_picked+1 # Change back to 1-based indexing (temporarily). Why? let "u %= $CARDS_IN_SUIT" if [ "$u" -eq 0 ] # Nested if/then condition test. then echo echo fi # Each hand set apart with a blank line. let "cards_picked += 1" fi done echo return 0 } # Structured programming: # Entire program logic modularized in functions. #=============== seed_random initialize_Deck initialize_Suits initialize_Cards deal_cards #=============== exit # Exercise 1: # Add comments to thoroughly document this script. # Exercise 2: # Add a routine (function) to print out each hand sorted in suits. # You may add other bells and whistles if you like. # Exercise 3: # Simplify and streamline the logic of the script. 34.2. Bash, version 3 On July 27, 2004, Chet Ramey released version 3 of Bash. This update fixed quite a number of bugs and added new features. Some of the more important added features: Chapter 34. Bash, versions 2, 3, and 4 526
- 533. Advanced Bash-Scripting Guide • A new, more generalized {a..z} brace expansion operator. #!/bin/bash for i in {1..10} # Simpler and more straightforward than #+ for i in $(seq 10) do echo -n "$i " done echo # 1 2 3 4 5 6 7 8 9 10 # Or just . . . echo {a..z} # a b c d e f g h i j k l m n o p q r s t u v w x y z echo {e..m} # e f g h i j k l m echo {z..a} # z y x w v u t s r q p o n m l k j i h g f e d c b a # Works backwards, too. echo {25..30} # 25 26 27 28 29 30 echo {3..-2} # 3 2 1 0 -1 -2 echo {X..d} # X Y Z [ ] ^ _ ` a b c d # Shows (some of) the ASCII characters between Z and a, #+ but don't rely on this type of behavior because . . . echo {]..a} # {]..a} # Why? # You can tack on prefixes and suffixes. echo "Number #"{1..4}, "..." # Number #1, Number #2, Number #3, Number #4, ... # You can concatenate brace-expansion sets. echo {1..3}{x..z}" +" "..." # 1x + 1y + 1z + 2x + 2y + 2z + 3x + 3y + 3z + ... # Generates an algebraic expression. # This could be used to find permutations. # You can nest brace-expansion sets. echo {{a..c},{1..3}} # a b c 1 2 3 # The "comma operator" splices together strings. # Unfortunately, brace expansion does not lend itself to parameterization. var1=1 var2=5 echo {$var1..$var2} # {1..5} • The ${!array[@]} operator, which expands to all the indices of a given array. #!/bin/bash Array=(element-zero element-one element-two element-three) echo ${Array[0]} # element-zero # First element of array. Chapter 34. Bash, versions 2, 3, and 4 527
- 534. Advanced Bash-Scripting Guide echo ${!Array[@]} # 0 1 2 3 # All the indices of Array. for i in ${!Array[@]} do echo ${Array[i]} # element-zero # element-one # element-two # element-three # # All the elements in Array. done • The =~ Regular Expression matching operator within a double brackets test expression. (Perl has a similar operator.) #!/bin/bash variable="This is a fine mess." echo "$variable" # Regex matching with =~ operator within [[ double brackets ]]. if [[ "$variable" =~ T.........fin*es* ]] # NOTE: As of version 3.2 of Bash, expression to match no longer quoted. then echo "match found" # match found fi Or, more usefully: #!/bin/bash input=$1 if [[ "$input" =~ "[1-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9][0-9][0-9]" ]] # ^ NOTE: Quoting not necessary, as of version 3.2 of Bash. # NNN-NN-NNNN (where each N is a digit). Initial digit must not be 0. then echo "Social Security number." # Process SSN. else echo "Not a Social Security number!" # Or, ask for corrected input. fi For additional examples of using the =~ operator, see Example A-29, Example 18-14, Example A-35, and Example A-24. • The new set -o pipefail option is useful for debugging pipes. If this option is set, then the exit status of a pipe is the exit status of the last command in the pipe to fail (return a non-zero value), rather than the actual final command in the pipe. See Example 15-43. Chapter 34. Bash, versions 2, 3, and 4 528
- 535. Advanced Bash-Scripting Guide The update to version 3 of Bash breaks a few scripts that worked under earlier versions. Test critical legacy scripts to make sure they still work! As it happens, a couple of the scripts in the Advanced Bash Scripting Guide had to be fixed up (see Example 9-4, for instance). 34.2.1. Bash, version 3.1 The version 3.1 update of Bash introduces a number of bugfixes and a few minor changes. • The += operator is now permitted in in places where previously only the = assignment operator was recognized. a=1 echo $a # 1 a+=5 # Won't work under versions of Bash earlier than 3.1. echo $a # 15 a+=Hello echo $a # 15Hello Here, += functions as a string concatenation operator. Note that its behavior in this particular context is different than within a let construct. a=1 echo $a # 1 let a+=5 # Integer arithmetic, rather than string concatenation. echo $a # 6 let a+=Hello # Doesn't "add" anything to a. echo $a # 6 34.2.2. Bash, version 3.2 This is pretty much a bugfix update. • In global parameter substitutions, the pattern no longer anchors at the start of the string. • The --wordexp option disables process substitution. • The =~ Regular Expression match operator no longer requires quoting of the pattern within [[ ... ]]. In fact, quoting in this context is not advisable as it may cause regex evaluation to fail. Chet Ramey states in the Bash FAQ that quoting explicitly disables regex evaluation. See also the Ubuntu Bug List and Wikinerds on Bash syntax. Setting shopt -s compat31 in a script causes reversion to the original behavior. Chapter 34. Bash, versions 2, 3, and 4 529
- 536. Advanced Bash-Scripting Guide 34.3. Bash, version 4 Chet Ramey announced Version 4 of Bash on the 20th of February, 2009. This release has a number of significant new features, as well as some important bugfixes. Among the new goodies: • Associative arrays. An associative array can be thought of as a set of two linked arrays -- one holding the data, and the other the keys that index the individual elements of the data array. Example 34-5. A simple address database #!/bin/bash4 # fetch_address.sh declare -A address # -A option declares associative array. address[Charles]="414 W. 10th Ave., Baltimore, MD 21236" address[John]="202 E. 3rd St., New York, NY 10009" address[Wilma]="1854 Vermont Ave, Los Angeles, CA 90023" echo "Charles's address is ${address[Charles]}." # Charles's address is 414 W. 10th Ave., Baltimore, MD 21236. echo "Wilma's address is ${address[Wilma]}." # Wilma's address is 1854 Vermont Ave, Los Angeles, CA 90023. echo "John's address is ${address[John]}." # John's address is 202 E. 3rd St., New York, NY 10009. Example 34-6. A somewhat more elaborate address database #!/bin/bash4 # fetch_address-2.sh # A more elaborate version of fetch_address.sh. SUCCESS=0 E_DB=99 # Error code for missing entry. declare -A address # -A option declares associative array. store_address () { address[$1]="$2" return $? } fetch_address () { if [[ -z "${address[$1]}" ]] Chapter 34. Bash, versions 2, 3, and 4 530
- 537. Advanced Bash-Scripting Guide then echo "$1's address is not in database." return $E_DB fi echo "$1's address is ${address[$1]}." return $? } store_address "Charles Jones" "414 W. 10th Ave., Baltimore, MD 21236" store_address "John Smith" "202 E. 3rd St., New York, NY 10009" store_address "Wilma Wilson" "1854 Vermont Ave, Los Angeles, CA 90023" # Exercise: # Rewrite the above store_address calls to read data from a file, #+ then assign field 1 to name, field 2 to address in the array. # Each line in the file would have a format corresponding to the above. # Use a while-read loop to read from file, sed or awk to parse the fields. fetch_address "Charles Jones" # Charles Jones's address is 414 W. 10th Ave., Baltimore, MD 21236. fetch_address "Wilma Wilson" # Wilma Wilson's address is 1854 Vermont Ave, Los Angeles, CA 90023. fetch_address "John Smith" # John Smith's address is 202 E. 3rd St., New York, NY 10009. fetch_address "Bozo Bozeman" # Bozo Bozeman's address is not in database. exit $? # In this case, exit code = 99, since that is function return. • Enhancements to the case construct: the ;;& and ;& terminators. Example 34-7. Testing characters #!/bin/bash4 test_char () { case "$1" in [[:print:]] ) echo "$1 is a printable character.";;& # | # The ;;& terminator continues to the next pattern test. | [[:alnum:]] ) echo "$1 is an alpha/numeric character.";;& # v [[:alpha:]] ) echo "$1 is an alphabetic character.";;& # v [[:lower:]] ) echo "$1 is a lowercase alphabetic character.";;& [[:digit:]] ) echo "$1 is an numeric character.";& # | # The ;& terminator executes the next statement ... # | %%%@@@@@ ) echo "********************************";; # v # ^^^^^^^^ ... even with a dummy pattern. esac } echo test_char 3 # 3 is a printable character. # 3 is an alpha/numeric character. # 3 is an numeric character. # ******************************** echo test_char m # m is a printable character. Chapter 34. Bash, versions 2, 3, and 4 531
- 538. Advanced Bash-Scripting Guide # m is an alpha/numeric character. # m is an alphabetic character. # m is a lowercase alphabetic character. echo test_char / # / is a printable character. echo # The ;;& terminator can save complex if/then conditions. # The ;& is somewhat less useful. • The new coproc builtin enables two parallel processes to communicate and interact. As Chet Ramey states in the Bash FAQ [119] , ver. 4.01: There is a new 'coproc' reserved word that specifies a coprocess: an asynchronous command run with two pipes connected to the creat shell. Coprocs can be named. The input and output file descriptor and the PID of the coprocess are available to the calling shell i variables with coproc-specific names. George Dimitriu explains, "... coproc ... is a feature used in Bash process substitution, which now is made publicly available." This means it can be explicitly invoked in a script, rather than just being a behind-the-scenes mechanism used by Bash. See http://linux010.blogspot.com/2008/12/bash-process-substitutio Coprocesses use file descriptors. File descriptors enable processes and pipes to communicate. #!/bin/bash4 # A coprocess communicates with a while-read loop. coproc { cat mx_data.txt; sleep 2; } # ^^^^^^^ # Try running this without "sleep 2" and see what happens. while read -u ${COPROC[0]} line # ${COPROC[0]} is the do #+ file descriptor of the coprocess. echo "$line" | sed -e 's/line/NOT-ORIGINAL-TEXT/' done kill $COPROC_PID # No longer need the coprocess, #+ so kill its PID. But, be careful! #!/bin/bash4 echo; echo a=aaa b=bbb c=ccc coproc echo "one two three" while read -u ${COPROC[0]} a b c; # Note that this loop Chapter 34. Bash, versions 2, 3, and 4 532
- 539. Advanced Bash-Scripting Guide do #+ runs in a subshell. echo "Inside while-read loop: "; echo "a = $a"; echo "b = $b"; echo "c = $c" echo "coproc file descriptor: ${COPROC[0]}" done # a = one # b = two # c = three # So far, so good, but ... echo "-----------------" echo "Outside while-read loop: " echo "a = $a" # a = echo "b = $b" # b = echo "c = $c" # c = echo "coproc file descriptor: ${COPROC[0]}" echo # The coproc is still running, but ... #+ it still doesn't enable the parent process #+ to "inherit" variables from the child process, the while-read loop. # Compare this to the "badread.sh" script. The coprocess is asynchronous, and this might cause a problem. It may terminate before another process has finished communicating with it. #!/bin/bash4 coproc cpname { for i in {0..10}; do echo "index = $i"; done; } # ^^^^^^ This is a *named* coprocess. read -u ${cpname[0]} echo $REPLY # index = 0 echo ${COPROC[0]} #+ No output ... the coprocess timed out # after the first loop iteration. # However, George Dimitriu has a partial fix. coproc cpname { for i in {0..10}; do echo "index = $i"; done; sleep 1; echo hi > myo; cat - >> myo; } # ^^^^^ This is a *named* coprocess. echo "I am main"$'04' >&${cpname[1]} myfd=${cpname[0]} echo myfd=$myfd ### while read -u $myfd ### do ### echo $REPLY; ### done echo $cpname_PID # Run this with and without the commented-out while-loop, and it is #+ apparent that each process, the executing shell and the coprocess, #+ waits for the other to finish writing in its own write-enabled pipe. • The new mapfile builtin makes it possible to load an array with the contents of a text file without using a loop or command substitution. Chapter 34. Bash, versions 2, 3, and 4 533
- 540. Advanced Bash-Scripting Guide #!/bin/bash4 mapfile Arr1 < $0 # Same result as Arr1=( $(cat $0) ) echo "${Arr1[@]}" # Copies this entire script out to stdout. echo "--"; echo # But, not the same as read -a !!! read -a Arr2 < $0 echo "${Arr2[@]}" # Reads only first line of script into the array. exit • The read builtin got a minor facelift. The -t timeout option now accepts (decimal) fractional values [120] and the -i option permits preloading the edit buffer. [121] Unfortunately, these enhancements are still a work in progress and not (yet) usable in scripts. • Parameter substitution gets case-modification operators. #!/bin/bash4 var=veryMixedUpVariable echo ${var} # veryMixedUpVariable echo ${var^} # VeryMixedUpVariable # * First char --> uppercase. echo ${var^^} # VERYMIXEDUPVARIABLE # ** All chars --> uppercase. echo ${var,} # veryMixedUpVariable # * First char --> lowercase. echo ${var,,} # verymixedupvariable # ** All chars --> lowercase. • The declare builtin now accepts the -l lowercase and -c capitalize options. #!/bin/bash4 declare -l var1 # Will change to lowercase var1=MixedCaseVARIABLE echo "$var1" # mixedcasevariable # Same effect as echo $var1 | tr A-Z a-z declare -c var2 # Changes only initial char to uppercase. var2=originally_lowercase echo "$var2" # Originally_lowercase # NOT the same effect as echo $var2 | tr a-z A-Z • Brace expansion has more options. Increment/decrement, specified in the final term within braces. #!/bin/bash4 echo {40..60..2} # 40 42 44 46 48 50 52 54 56 58 60 # All the even numbers, between 40 and 60. echo {60..40..2} # 60 58 56 54 52 50 48 46 44 42 40 # All the even numbers, between 40 and 60, counting backwards. # In effect, a decrement. echo {60..40..-2} Chapter 34. Bash, versions 2, 3, and 4 534
- 541. Advanced Bash-Scripting Guide # The same output. The minus sign is not necessary. # But, what about letters and symbols? echo {X..d} # X Y Z [ ] ^ _ ` a b c d echo {X..d..2} # X Z ^ ` b d # It seems to work for upper/lowercase letters, #+ but the increment is a bit inconsistent on symbols. Zero-padding, specified in the first term within braces, prefixes each term in the output with the same number of zeroes. bash4$ echo {010..15} 010 011 012 013 014 015 bash4$ echo {000..10} 000 001 002 003 004 005 006 007 008 009 010 • Substring extraction on positional parameters now starts with $0 as the zero-index. (This corrects an inconsistency in the treatment of positional parameters.) #!/bin/bash4 # show-params.bash4 # Invoke this scripts with at least one positional parameter. E_BADPARAMS=99 if [ -z "$1" ] then echo "Usage $0 param1 ..." exit $E_BADPARAMS fi echo ${@:0} # bash3 show-params.bash4 one two three # one two three # bash4 show-params.bash4 one two three # show-params.bash4 one two three # $0 $1 $2 $3 • The new ** globbing operator matches filenames and directories recursively. #!/bin/bash4 # filelist.bash4 shopt -s globstar # Must enable globstar, otherwise ** doesn't work. # The globstar shell option is new to version 4 of Bash. echo "Using *"; echo for filename in * do echo "$filename" done # Lists only files in current directory ($PWD). Chapter 34. Bash, versions 2, 3, and 4 535
- 542. Advanced Bash-Scripting Guide echo; echo "--------------"; echo echo "Using **" for filename in ** do echo "$filename" done # Lists complete file tree, recursively. exit Using * allmyfiles filelist.bash4 -------------- Using ** allmyfiles allmyfiles/file.index.txt allmyfiles/my_music allmyfiles/my_music/me-singing-60s-folksongs.ogg allmyfiles/my_music/me-singing-opera.ogg allmyfiles/my_music/piano-lesson.1.ogg allmyfiles/my_pictures allmyfiles/my_pictures/at-beach-with-Jade.png allmyfiles/my_pictures/picnic-with-Melissa.png filelist.bash4 • The new $BASHPID internal variable. • There is a new builtin error-handling function named command_not_found_handle. #!/bin/bash4 command_not_found_handle () { # Accepts implicit parameters. echo "The following command is not valid: ""$1""" echo "With the following argument(s): ""$2"" ""$3""" # $4, $5 ... } # $1, $2, etc. are not explicitly passed to the function. bad_command arg1 arg2 # The following command is not valid: "bad_command" # With the following argument(s): "arg1" "arg2" Editorial comment Associative arrays? Coprocesses? Whatever happened to the lean and mean Bash we have come to know and love? Could it be suffering from (horrors!) "feature creep"? Or perhaps even Korn shell envy? Note to Chet Ramey: Please add only essential features in future Bash releases -- perhaps for-each loops and support for multi-dimensional arrays. [122] Most Bash users won't need, won't use, and likely won't greatly appreciate complex "features" like built-in debuggers, Perl interfaces, and bolt-on rocket boosters. Chapter 34. Bash, versions 2, 3, and 4 536
- 543. Chapter 35. Endnotes 35.1. Author's Note doce ut discas (Teach, that you yourself may learn.) How did I come to write a Bash scripting book? It's a strange tale. It seems that a few years back I needed to learn shell scripting -- and what better way to do that than to read a good book on the subject? I was looking to buy a tutorial and reference covering all aspects of the subject. I was looking for a book that would take difficult concepts, turn them inside out, and explain them in excruciating detail, with well-commented examples. [123] In fact, I was looking for this very book, or something very much like it. Unfortunately, it didn't exist, and if I wanted it, I'd have to write it. And so, here we are, folks. That reminds me of the apocryphal story about a mad professor. Crazy as a loon, the fellow was. At the sight of a book, any book -- at the library, at a bookstore, anywhere -- he would become totally obsessed with the idea that he could have written it, should have written it -- and done a better job of it to boot. He would thereupon rush home and proceed to do just that, write a book with the very same title. When he died some years later, he allegedly had several thousand books to his credit, probably putting even Asimov to shame. The books might not have been any good, who knows, but does that really matter? Here's a fellow who lived his dream, even if he was obsessed by it, driven by it . . . and somehow I can't help admiring the old coot. 35.2. About the Author Who is this guy anyhow? The author claims no credentials or special qualifications, [124] other than a compulsion to write. [125] This book is somewhat of a departure from his other major work, HOW-2 Meet Women: The Shy Man's Guide to Relationships. He has also written the Software-Building HOWTO. Of late, he has been trying his (heavy) hand at short fiction. A Linux user since 1995 (Slackware 2.2, kernel 1.2.1), the author has emitted a few software truffles, including the cruft one-time pad encryption utility, the mcalc mortgage calculator, the judge Scrabble® adjudicator, the yawl word gaming list package, and the Quacky anagramming gaming package. He got off to a rather shaky start in the computer game -- programming FORTRAN IV on a CDC 3800 -- and is not the least bit nostalgic for those days. Living in a secluded desert community with wife and orange tabby, he cherishes human frailty, especially his own. [126] 35.3. Where to Go For Help The author will sometimes, if not too busy (and in a good mood), answer general scripting questions. [127] However, if you have a problem getting a specific script to work, you would be well advised to post to the comp.os.unix.shell Usenet newsgroup. If you need assistance with a schoolwork assignment, read the pertinent sections of this and other reference works. Do your best to solve the problem using your own wits and resources. Kindly do not waste the author's Chapter 35. Endnotes 537
- 544. Advanced Bash-Scripting Guide time. You will get neither help nor sympathy. [128] ... sophisticated in mechanism but possibly agile operating under noises being extremely suppressed ... --CI-300 printer manual 35.4. Tools Used to Produce This Book 35.4.1. Hardware A used IBM Thinkpad, model 760XL laptop (P166, 104 meg RAM) running Red Hat 7.1/7.3. Sure, it's slow and has a funky keyboard, but it beats the heck out of a No. 2 pencil and a Big Chief tablet. Update: upgraded to a 770Z Thinkpad (P2-366, 192 meg RAM) running FC3. Anyone feel like donating a later-model laptop to a starving writer <g>? Update: upgraded to a A31 Thinkpad (P4-1.6, 512 meg RAM) running FC8. No longer starving, and no longer soliciting donations <g>. 35.4.2. Software and Printware i. Bram Moolenaar's powerful SGML-aware vim text editor. ii. OpenJade, a DSSSL rendering engine for converting SGML documents into other formats. iii. Norman Walsh's DSSSL stylesheets. iv. DocBook, The Definitive Guide, by Norman Walsh and Leonard Muellner (O'Reilly, ISBN 1-56592-580-7). This is still the standard reference for anyone attempting to write a document in Docbook SGML format. 35.5. Credits Community participation made this project possible. The author gratefully acknowledges that writing this book would have been unthinkable without help and feedback from all you people out there. Philippe Martin translated the first version (0.1) of this document into DocBook/SGML. While not on the job at a small French company as a software developer, he enjoys working on GNU/Linux documentation and software, reading literature, playing music, and, for his peace of mind, making merry with friends. You may run across him somewhere in France or in the Basque Country, or you can email him at feloy@free.fr. Philippe Martin also pointed out that positional parameters past $9 are possible using {bracket} notation. (See Example 4-5). Stéphane Chazelas sent a long list of corrections, additions, and example scripts. More than a contributor, he had, in effect, for a while taken on the role of co-editor for this document. Merci beaucoup! Paulo Marcel Coelho Aragao offered many corrections, both major and minor, and contributed quite a number of helpful suggestions. Chapter 35. Endnotes 538
- 545. Advanced Bash-Scripting Guide I would like to especially thank Patrick Callahan, Mike Novak, and Pal Domokos for catching bugs, pointing out ambiguities, and for suggesting clarifications and changes in the preliminary version (0.1) of this document. Their lively discussion of shell scripting and general documentation issues inspired me to try to make this document more readable. I'm grateful to Jim Van Zandt for pointing out errors and omissions in version 0.2 of this document. He also contributed an instructive example script. Many thanks to Jordi Sanfeliu for giving permission to use his fine tree script (Example A-16), and to Rick Boivie for revising it. Likewise, thanks to Michel Charpentier for permission to use his dc factoring script (Example 15-52). Kudos to Noah Friedman for permission to use his string function script (Example A-18). Emmanuel Rouat suggested corrections and additions on command substitution and aliases. He also contributed a very nice sample .bashrc file (Appendix L). Heiner Steven kindly gave permission to use his base conversion script, Example 15-48. He also made a number of corrections and many helpful suggestions. Special thanks. Rick Boivie contributed the delightfully recursive pb.sh script (Example 33-9), revised the tree.sh script (Example A-16), and suggested performance improvements for the monthlypmt.sh script (Example 15-47). Florian Wisser enlightened me on some of the fine points of testing strings (see Example 7-6), and on other matters. Oleg Philon sent suggestions concerning cut and pidof. Michael Zick extended the empty array example to demonstrate some surprising array properties. He also contributed the isspammer scripts (Example 15-41 and Example A-28). Marc-Jano Knopp sent corrections and clarifications on DOS batch files. Hyun Jin Cha found several typos in the document in the process of doing a Korean translation. Thanks for pointing these out. Andreas Abraham sent in a long list of typographical errors and other corrections. Special thanks! Others contributing scripts, making helpful suggestions, and pointing out errors were Gabor Kiss, Leopold Toetsch, Peter Tillier, Marcus Berglof, Tony Richardson, Nick Drage (script ideas!), Rich Bartell, Jess Thrysoee, Adam Lazur, Bram Moolenaar, Baris Cicek, Greg Keraunen, Keith Matthews, Sandro Magi, Albert Reiner, Dim Segebart, Rory Winston, Lee Bigelow, Wayne Pollock, "jipe," "bojster," "nyal," "Hobbit," "Ender," "Little Monster" (Alexis), "Mark," "Patsie," Peggy Russell, Emilio Conti, Ian. D. Allen, Hans-Joerg Diers, Arun Giridhar, Dennis Leeuw, Dan Jacobson, Aurelio Marinho Jargas, Edward Scholtz, Jean Helou, Chris Martin, Lee Maschmeyer, Bruno Haible, Wilbert Berendsen, Sebastien Godard, Bjön Eriksson, John MacDonald, John Lange, Joshua Tschida, Troy Engel, Manfred Schwarb, Amit Singh, Bill Gradwohl, E. Choroba, David Lombard, Jason Parker, Steve Parker, Bruce W. Clare, William Park, Vernia Damiano, Mihai Maties, Mark Alexander, Jeremy Impson, Ken Fuchs, Jared Martin, Frank Wang, Sylvain Fourmanoit, Matthew Sage, Matthew Walker, Kenny Stauffer, Filip Moritz, Andrzej Stefanski, Daniel Albers, Stefano Palmeri, Nils Radtke, Serghey Rodin, Jeroen Domburg, Alfredo Pironti, Phil Braham, Bruno de Oliveira Chapter 35. Endnotes 539
- 546. Advanced Bash-Scripting Guide Schneider, Stefano Falsetto, Chris Morgan, Walter Dnes, Linc Fessenden, Michael Iatrou, Pharis Monalo, Jesse Gough, Fabian Kreutz, Mark Norman, Harald Koenig, Dan Stromberg, Peter Knowles, Francisco Lobo, Mariusz Gniazdowski, Sebastian Arming, Chetankumar Phulpagare, Benno Schulenberg, Tedman Eng, Jochen DeSmet, Juan Nicolas Ruiz, Oliver Beckstein, Achmed Darwish, Dotan Barak, Richard Neill, Albert Siersema, Omair Eshkenazi, Geoff Lee, JuanJo Ciarlante, Cliff Bamford, Nathan Coulter, George Dimitriu, Antonio Macchi, Tomas Pospisek, Andreas Kühne, Pádraig Brady, and David Lawyer (himself an author of four HOWTOs). My gratitude to Chet Ramey and Brian Fox for writing Bash, and building into it elegant and powerful scripting capabilities rivaling those of ksh. Very special thanks to the hard-working volunteers at the Linux Documentation Project. The LDP hosts a repository of Linux knowledge and lore, and has, to a great extent, enabled the publication of this book. Thanks and appreciation to IBM, Red Hat, the Free Software Foundation, and all the good people fighting the good fight to keep Open Source software free and open. Belated thanks to my fourth grade teacher, Miss Spencer, for emotional support and for convincing me that maybe, just maybe I wasn't a total loss. Thanks most of all to my wife, Anita, for her encouragement, inspiration, and emotional support. 35.6. Disclaimer (This is a variant of the standard LDP disclaimer.) No liability for the contents of this document can be accepted. Use the concepts, examples and information at your own risk. There may be errors, omissions, and inaccuracies that could cause you to lose data or harm your system, so proceed with appropriate caution. The author takes no responsibility for any damages, incidental or otherwise. As it happens, it is highly unlikely that either you or your system will suffer ill effects. In fact, the raison d'etre of this book is to enable its readers to analyze shell scripts and determine whether they have unanticipated consequences. Chapter 35. Endnotes 540
- 547. Bibliography Those who do not understand UNIX are condemned to reinvent it, poorly. --Henry Spencer Edited by Peter Denning, Computers Under Attack: Intruders, Worms, and Viruses, ACM Press, 1990, 0-201-53067-8. This compendium contains a couple of articles on shell script viruses. * Ken Burtch, Linux Shell Scripting with Bash, 1st edition, Sams Publishing (Pearson), 2004, 0672326426. Covers much of the same material as the ABS Guide, though in a different style. * Dale Dougherty and Arnold Robbins, Sed and Awk, 2nd edition, O'Reilly and Associates, 1997, 1-156592-225-5. Unfolding the full power of shell scripting requires at least a passing familiarity with sed and awk. This is the standard tutorial. It includes an excellent introduction to Regular Expressions. Recommended. * Jeffrey Friedl, Mastering Regular Expressions, O'Reilly and Associates, 2002, 0-596-00289-0. Still the best all-around reference on Regular Expressions. * Aeleen Frisch, Essential System Administration, 3rd edition, O'Reilly and Associates, 2002, 0-596-00343-9. This excellent manual provides a decent introduction to shell scripting from a sys admin point of view. It includes comprehensive explanations of the startup and initialization scripts in a UNIX system. * Stephen Kochan and Patrick Wood, Unix Shell Programming, Hayden, 1990, 067248448X. Bibliography 541
- 548. Advanced Bash-Scripting Guide Still considered a standard reference, though somewhat dated, and a bit "wooden" stylistically speaking. [129] In fact, this book was the ABS Guide author's first exposure to UNIX shell scripting, lo these many years ago. For more information, see the Kochan-Wood website. * Neil Matthew and Richard Stones, Beginning Linux Programming, Wrox Press, 1996, 1874416680. Surprisingly good in-depth coverage of various programming languages available for Linux, including a fairly strong chapter on shell scripting. * Herbert Mayer, Advanced C Programming on the IBM PC, Windcrest Books, 1989, 0830693637. Excellent coverage of algorithms and general programming practices. Highly recommended, but unfortunately out of print. * David Medinets, Unix Shell Programming Tools, McGraw-Hill, 1999, 0070397333. Pretty good treatment of shell scripting, with examples, and a short intro to Tcl and Perl. * Cameron Newham and Bill Rosenblatt, Learning the Bash Shell, 2nd edition, O'Reilly and Associates, 1998, 1-56592-347-2. This is a valiant effort at a decent shell primer, but sadly deficient in its coverage of writing scripts and lacking sufficient examples. * Anatole Olczak, Bourne Shell Quick Reference Guide, ASP, Inc., 1991, 093573922X. A very handy pocket reference, despite lacking coverage of Bash-specific features. * Jerry Peek, Tim O'Reilly, and Mike Loukides, Unix Power Tools, 3rd edition, O'Reilly and Associates, Random House, 2002, 0-596-00330-7. Bibliography 542
- 549. Advanced Bash-Scripting Guide Contains a couple of sections of very informative in-depth articles on shell programming, but falls short of being a self-teaching manual. It reproduces much of the Regular Expressions tutorial from the Dougherty and Robbins book, above. The comprehensive coverage of UNIX commands makes this book worthy of a place on your bookshelf. * Clifford Pickover, Computers, Pattern, Chaos, and Beauty, St. Martin's Press, 1990, 0-312-04123-3. A treasure trove of ideas and recipes for computer-based exploration of mathematical oddities. * George Polya, How To Solve It, Princeton University Press, 1973, 0-691-02356-5. The classic tutorial on problem-solving methods (i.e., algorithms), with special emphasis on how to teach them. * Chet Ramey and Brian Fox, The GNU Bash Reference Manual, Network Theory Ltd, 2003, 0-9541617-7-7. This manual is the definitive reference for GNU Bash. The authors of this manual, Chet Ramey and Brian Fox, are the original developers of GNU Bash. For each copy sold, the publisher donates $1 to the Free Software Foundation. * Arnold Robbins, Bash Reference Card, SSC, 1998, 1-58731-010-5. Excellent Bash pocket reference (don't leave home without it, especially if you're a sysadmin). A bargain at $4.95, but unfortunately no longer available for free download. * Arnold Robbins, Effective Awk Programming, Free Software Foundation / O'Reilly and Associates, 2000, 1-882114-26-4. The absolute best awk tutorial and reference. The free electronic version of this book is part of the awk documentation, and printed copies of the latest version are available from O'Reilly and Associates. This book has served as an inspiration for the author of the ABS Guide. * Bibliography 543
- 550. Advanced Bash-Scripting Guide Bill Rosenblatt, Learning the Korn Shell, O'Reilly and Associates, 1993, 1-56592-054-6. This well-written book contains some excellent pointers on shell scripting in general. * Paul Sheer, LINUX: Rute User's Tutorial and Exposition, 1st edition, , 2002, 0-13-033351-4. Very detailed and readable introduction to Linux system administration. The book is available in print, or on-line. * Ellen Siever and the staff of O'Reilly and Associates, Linux in a Nutshell, 2nd edition, O'Reilly and Associates, 1999, 1-56592-585-8. The all-around best Linux command reference. It even has a Bash section. * Dave Taylor, Wicked Cool Shell Scripts: 101 Scripts for Linux, Mac OS X, and Unix Systems, 1st edition, No Starch Press, 2004, 1-59327-012-7. Just what the title promises . . . * The UNIX CD Bookshelf, 3rd edition, O'Reilly and Associates, 2003, 0-596-00392-7. An array of seven UNIX books on CD ROM, including UNIX Power Tools, Sed and Awk, and Learning the Korn Shell. A complete set of all the UNIX references and tutorials you would ever need at about $130. Buy this one, even if it means going into debt and not paying the rent. Update: Seems to have somehow fallen out of print. Ah, well. You can still buy the dead-tree editions of these books. * The O'Reilly books on Perl. (Actually, any O'Reilly books.) *** Other Resources Bibliography 544
- 551. Advanced Bash-Scripting Guide Fioretti, Marco, "Scripting for X Productivity," Linux Journal, Issue 113, September, 2003, pp. 86-9. Ben Okopnik's well-written introductory Bash scripting articles in issues 53, 54, 55, 57, and 59 of the Linux Gazette, and his explanation of "The Deep, Dark Secrets of Bash" in issue 56. Chet Ramey's Bash - The GNU Shell, a two-part series published in issues 3 and 4 of the Linux Journal, July-August 1994. Mike G's Bash-Programming-Intro HOWTO. Richard's Unix Scripting Universe. Chet Ramey's Bash FAQ, and mirror site. Greg's WIKI: Bash FAQ. Ed Schaefer's Shell Corner in Unix Review. Example shell scripts at Lucc's Shell Scripts . Example shell scripts at SHELLdorado . Example shell scripts at Noah Friedman's script site. Examples from the The Bash Scripting Cookbook, by Albing, Vossen, and Newham. Example shell scripts at zazzybob. Example shell scripts at joyent. Steve Parker's Shell Programming Stuff. An excellent collection of Bash scripting tips, tricks, and resources at the Bash Hackers Wiki. Giles Orr's Bash-Prompt HOWTO. Bibliography 545
- 552. Advanced Bash-Scripting Guide The Pixelbeat command-line reference. Very nice sed, awk, and regular expression tutorials at The UNIX Grymoire. The GNU sed and gawk manuals. As you recall, gawk is the enhanced GNU version of awk. Another site for the GNU gawk reference manual. Eric Pement's sed resources page. Many interesting sed scripts at the seder's grab bag. Tips and tricks at Linux Reviews. Trent Fisher's groff tutorial. "Shelltris" and "shellitaire" at Shell Script Games. Mark Komarinski's Printing-Usage HOWTO. The Linux USB subsystem (helpful in writing scripts affecting USB peripherals). There is some nice material on I/O redirection in chapter 10 of the textutils documentation at the University of Alberta site. Rick Hohensee has written the osimpa i386 assembler entirely as Bash scripts. Aurelio Marinho Jargas has written a Regular expression wizard. He has also written an informative book on Regular Expressions, in Portuguese. Ben Tomkins has created the Bash Navigator directory management tool. William Park has been working on a project to incorporate certain Awk and Python features into Bash. Among these is a gdbm interface. He has released bashdiff on Freshmeat.net. He has an article in the November, 2004 issue of the Linux Gazette on adding string functions to Bash, with a followup article in the December issue, and yet another in the January, 2005 issue. Bibliography 546
- 553. Advanced Bash-Scripting Guide Peter Knowles has written an elaborate Bash script that generates a book list on the Sony Librie e-book reader. This useful tool facilitates loading non-DRM user content on the Librie (and the newer PRS-50X-series devices). Tim Waugh's xmlto is an elaborate Bash script for converting Docbook XML documents to other formats. Philip Patterson's logforbash logging/debugging script. Of historical interest are Colin Needham's original International Movie Database (IMDB) reader polling scripts, which nicely illustrate the use of awk for string parsing. Unfortunately, the URL link is broken. --- Fritz Mehner has written a bash-support plugin for the vim text editor. He has also also come up with his own stylesheet for Bash. Compare it with the ABS Guide Unofficial Stylesheet. --- Penguin Pete has quite a number of shell scripting tips and hints on his superb site. Highly recommended. The excellent Bash Reference Manual, by Chet Ramey and Brian Fox, distributed as part of the bash-2-doc package (available as an rpm). See especially the instructive example scripts in this package. John Lion's classic, A Commentary on the Sixth Edition UNIX Operating System. The comp.os.unix.shell newsgroup. The dd thread on Linux Questions. The comp.os.unix.shell FAQ. Assorted comp.os.unix FAQs. The Wikipedia article covering dc. The manpages for bash and bash2, date, expect, expr, find, grep, gzip, ln, patch, tar, tr, bc, xargs. The texinfo documentation on bash, dd, m4, gawk, and sed. Bibliography 547
- 555. Appendix A. Contributed Scripts These scripts, while not fitting into the text of this document, do illustrate some interesting shell programming techniques. They are useful, too. Have fun analyzing and running them. Example A-1. mailformat: Formatting an e-mail message #!/bin/bash # mail-format.sh (ver. 1.1): Format e-mail messages. # Gets rid of carets, tabs, and also folds excessively long lines. # ================================================================= # Standard Check for Script Argument(s) ARGS=1 E_BADARGS=65 E_NOFILE=66 if [ $# -ne $ARGS ] # Correct number of arguments passed to script? then echo "Usage: `basename $0` filename" exit $E_BADARGS fi if [ -f "$1" ] # Check if file exists. then file_name=$1 else echo "File "$1" does not exist." exit $E_NOFILE fi # ================================================================= MAXWIDTH=70 # Width to fold excessively long lines to. # --------------------------------- # A variable can hold a sed script. sedscript='s/^>// s/^ *>// s/^ *// s/ *//' # --------------------------------- # Delete carets and tabs at beginning of lines, #+ then fold lines to $MAXWIDTH characters. sed "$sedscript" $1 | fold -s --width=$MAXWIDTH # -s option to "fold" #+ breaks lines at whitespace, if possible. # This script was inspired by an article in a well-known trade journal #+ extolling a 164K MS Windows utility with similar functionality. # # An nice set of text processing utilities and an efficient #+ scripting language provide an alternative to bloated executables. exit Appendix A. Contributed Scripts 549
- 556. Advanced Bash-Scripting Guide Example A-2. rn: A simple-minded file renaming utility This script is a modification of Example 15-22. #! /bin/bash # rn.sh # Very simpleminded filename "rename" utility (based on "lowercase.sh"). # # The "ren" utility, by Vladimir Lanin (lanin@csd2.nyu.edu), #+ does a much better job of this. ARGS=2 E_BADARGS=85 ONE=1 # For getting singular/plural right (see below). if [ $# -ne "$ARGS" ] then echo "Usage: `basename $0` old-pattern new-pattern" # As in "rn gif jpg", which renames all gif files in working directory to jpg. exit $E_BADARGS fi number=0 # Keeps track of how many files actually renamed. for filename in *$1* #Traverse all matching files in directory. do if [ -f "$filename" ] # If finds match... then fname=`basename $filename` # Strip off path. n=`echo $fname | sed -e "s/$1/$2/"` # Substitute new for old in filename. mv $fname $n # Rename. let "number += 1" fi done if [ "$number" -eq "$ONE" ] # For correct grammar. then echo "$number file renamed." else echo "$number files renamed." fi exit $? # Exercises: # --------- # What types of files will this not work on? # How can this be fixed? Example A-3. blank-rename: Renames filenames containing blanks This is an even simpler-minded version of previous script. #! /bin/bash # blank-rename.sh # Appendix A. Contributed Scripts 550
- 557. Advanced Bash-Scripting Guide # Substitutes underscores for blanks in all the filenames in a directory. ONE=1 # For getting singular/plural right (see below). number=0 # Keeps track of how many files actually renamed. FOUND=0 # Successful return value. for filename in * #Traverse all files in directory. do echo "$filename" | grep -q " " # Check whether filename if [ $? -eq $FOUND ] #+ contains space(s). then fname=$filename # Yes, this filename needs work. n=`echo $fname | sed -e "s/ /_/g"` # Substitute underscore for blank. mv "$fname" "$n" # Do the actual renaming. let "number += 1" fi done if [ "$number" -eq "$ONE" ] # For correct grammar. then echo "$number file renamed." else echo "$number files renamed." fi exit 0 Example A-4. encryptedpw: Uploading to an ftp site, using a locally encrypted password #!/bin/bash # Example "ex72.sh" modified to use encrypted password. # Note that this is still rather insecure, #+ since the decrypted password is sent in the clear. # Use something like "ssh" if this is a concern. E_BADARGS=85 if [ -z "$1" ] then echo "Usage: `basename $0` filename" exit $E_BADARGS fi Username=bozo # Change to suit. pword=/home/bozo/secret/password_encrypted.file # File containing encrypted password. Filename=`basename $1` # Strips pathname out of file name. Server="XXX" Directory="YYY" # Change above to actual server name & directory. Password=`cruft <$pword` # Decrypt password. # Uses the author's own "cruft" file encryption package, #+ based on the classic "onetime pad" algorithm, #+ and obtainable from: #+ Primary-site: ftp://ibiblio.org/pub/Linux/utils/file #+ cruft-0.2.tar.gz [16k] Appendix A. Contributed Scripts 551
- 558. Advanced Bash-Scripting Guide ftp -n $Server <<End-Of-Session user $Username $Password binary bell cd $Directory put $Filename bye End-Of-Session # -n option to "ftp" disables auto-logon. # Note that "bell" rings 'bell' after each file transfer. exit 0 Example A-5. copy-cd: Copying a data CD #!/bin/bash # copy-cd.sh: copying a data CD CDROM=/dev/cdrom # CD ROM device OF=/home/bozo/projects/cdimage.iso # output file # /xxxx/xxxxxxxx/ Change to suit your system. BLOCKSIZE=2048 # SPEED=10 # If unspecified, uses max spd. # DEVICE=/dev/cdrom older version. DEVICE="1,0,0" echo; echo "Insert source CD, but do *not* mount it." echo "Press ENTER when ready. " read ready # Wait for input, $ready not used. echo; echo "Copying the source CD to $OF." echo "This may take a while. Please be patient." dd if=$CDROM of=$OF bs=$BLOCKSIZE # Raw device copy. echo; echo "Remove data CD." echo "Insert blank CDR." echo "Press ENTER when ready. " read ready # Wait for input, $ready not used. echo "Copying $OF to CDR." # cdrecord -v -isosize speed=$SPEED dev=$DEVICE $OF # Old version. wodim -v -isosize dev=$DEVICE $OF # Uses Joerg Schilling's "cdrecord" package (see its docs). # http://www.fokus.gmd.de/nthp/employees/schilling/cdrecord.html # Newer Linux distros may use "wodim" rather than "cdrecord" ... echo; echo "Done copying $OF to CDR on device $CDROM." echo "Do you want to erase the image file (y/n)? " # Probably a huge file. read answer case "$answer" in [yY]) rm -f $OF echo "$OF erased." ;; Appendix A. Contributed Scripts 552
- 559. Advanced Bash-Scripting Guide *) echo "$OF not erased.";; esac echo # Exercise: # Change the above "case" statement to also accept "yes" and "Yes" as input. exit 0 Example A-6. Collatz series #!/bin/bash # collatz.sh # The notorious "hailstone" or Collatz series. # ------------------------------------------- # 1) Get the integer "seed" from the command-line. # 2) NUMBER <-- seed # 3) Print NUMBER. # 4) If NUMBER is even, divide by 2, or # 5)+ if odd, multiply by 3 and add 1. # 6) NUMBER <-- result # 7) Loop back to step 3 (for specified number of iterations). # # The theory is that every sequence, #+ no matter how large the initial value, #+ eventually settles down to repeating "4,2,1..." cycles, #+ even after fluctuating through a wide range of values. # # This is an instance of an "iterate," #+ an operation that feeds its output back into its input. # Sometimes the result is a "chaotic" series. MAX_ITERATIONS=200 # For large seed numbers (>32000), try increasing MAX_ITERATIONS. h=${1:-$$} # Seed. # Use $PID as seed, #+ if not specified as command-line arg. echo echo "C($h) --- $MAX_ITERATIONS Iterations" echo for ((i=1; i<=MAX_ITERATIONS; i++)) do # echo -n "$h " # ^^^ # tab # printf does it better ... COLWIDTH=%7d printf $COLWIDTH $h let "remainder = h % 2" if [ "$remainder" -eq 0 ] # Even? then let "h /= 2" # Divide by 2. else Appendix A. Contributed Scripts 553
- 560. Advanced Bash-Scripting Guide let "h = h*3 + 1" # Multiply by 3 and add 1. fi COLUMNS=10 # Output 10 values per line. let "line_break = i % $COLUMNS" if [ "$line_break" -eq 0 ] then echo fi done echo # For more information on this strange mathematical function, #+ see _Computers, Pattern, Chaos, and Beauty_, by Pickover, p. 185 ff., #+ as listed in the bibliography. exit 0 Example A-7. days-between: Days between two dates #!/bin/bash # days-between.sh: Number of days between two dates. # Usage: ./days-between.sh [M]M/[D]D/YYYY [M]M/[D]D/YYYY # # Note: Script modified to account for changes in Bash, v. 2.05b +, #+ that closed the loophole permitting large negative #+ integer return values. ARGS=2 # Two command-line parameters expected. E_PARAM_ERR=85 # Param error. REFYR=1600 # Reference year. CENTURY=100 DIY=365 ADJ_DIY=367 # Adjusted for leap year + fraction. MIY=12 DIM=31 LEAPCYCLE=4 MAXRETVAL=255 # Largest permissible #+ positive return value from a function. diff= # Declare global variable for date difference. value= # Declare global variable for absolute value. day= # Declare globals for day, month, year. month= year= Param_Error () # Command-line parameters wrong. { echo "Usage: `basename $0` [M]M/[D]D/YYYY [M]M/[D]D/YYYY" echo " (date must be after 1/3/1600)" exit $E_PARAM_ERR } Appendix A. Contributed Scripts 554
- 561. Advanced Bash-Scripting Guide Parse_Date () # Parse date from command-line params. { month=${1%%/**} dm=${1%/**} # Day and month. day=${dm#*/} let "year = `basename $1`" # Not a filename, but works just the same. } check_date () # Checks for invalid date(s) passed. { [ "$day" -gt "$DIM" ] || [ "$month" -gt "$MIY" ] || [ "$year" -lt "$REFYR" ] && Param_Error # Exit script on bad value(s). # Uses or-list / and-list. # # Exercise: Implement more rigorous date checking. } strip_leading_zero () # Better to strip possible leading zero(s) { #+ from day and/or month return ${1#0} #+ since otherwise Bash will interpret them } #+ as octal values (POSIX.2, sect 2.9.2.1). day_index () # Gauss' Formula: { # Days from March 1, 1600 to date passed as param. # ^^^^^^^^^^^^^ day=$1 month=$2 year=$3 let "month = $month - 2" if [ "$month" -le 0 ] then let "month += 12" let "year -= 1" fi let "year -= $REFYR" let "indexyr = $year / $CENTURY" let "Days = $DIY*$year + $year/$LEAPCYCLE - $indexyr + $indexyr/$LEAPCYCLE + $ADJ_DIY*$month/$MIY + $day - $DIM" # For an in-depth explanation of this algorithm, see #+ http://weblogs.asp.net/pgreborio/archive/2005/01/06/347968.aspx echo $Days } calculate_difference () # Difference between two day indices. { let "diff = $1 - $2" # Global variable. } abs () # Absolute value Appendix A. Contributed Scripts 555
- 562. Advanced Bash-Scripting Guide { # Uses global "value" variable. if [ "$1" -lt 0 ] # If negative then #+ then let "value = 0 - $1" #+ change sign, else #+ else let "value = $1" #+ leave it alone. fi } if [ $# -ne "$ARGS" ] # Require two command-line params. then Param_Error fi Parse_Date $1 check_date $day $month $year # See if valid date. strip_leading_zero $day # Remove any leading zeroes day=$? #+ on day and/or month. strip_leading_zero $month month=$? let "date1 = `day_index $day $month $year`" Parse_Date $2 check_date $day $month $year strip_leading_zero $day day=$? strip_leading_zero $month month=$? date2=$(day_index $day $month $year) # Command substitution. calculate_difference $date1 $date2 abs $diff # Make sure it's positive. diff=$value echo $diff exit 0 # Exercise: # -------- # If given only one command-line parameter, have the script #+ use today's date as the second. # Compare this script with #+ the implementation of Gauss' Formula in a C program at #+ http://buschencrew.hypermart.net/software/datedif Example A-8. Making a dictionary #!/bin/bash # makedict.sh [make dictionary] Appendix A. Contributed Scripts 556
- 563. Advanced Bash-Scripting Guide # Modification of /usr/sbin/mkdict (/usr/sbin/cracklib-forman) script. # Original script copyright 1993, by Alec Muffett. # # This modified script included in this document in a manner #+ consistent with the "LICENSE" document of the "Crack" package #+ that the original script is a part of. # This script processes text files to produce a sorted list #+ of words found in the files. # This may be useful for compiling dictionaries #+ and for other lexicographic purposes. E_BADARGS=65 if [ ! -r "$1" ] # Need at least one then #+ valid file argument. echo "Usage: $0 files-to-process" exit $E_BADARGS fi # SORT="sort" # No longer necessary to define options #+ to sort. Changed from original script. cat $* | # Contents of specified files to stdout. tr A-Z a-z | # Convert to lowercase. tr ' ' '012' | # New: change spaces to newlines. # tr -cd '012[a-z][0-9]' | # Get rid of everything non-alphanumeric #+ (in original script). tr -c '012a-z' '012' | # Rather than deleting non-alpha chars, #+ change them to newlines. sort | # $SORT options unnecessary now. uniq | # Remove duplicates. grep -v '^#' | # Delete lines beginning with a hashmark. grep -v '^$' # Delete blank lines. exit 0 Example A-9. Soundex conversion #!/bin/bash # soundex.sh: Calculate "soundex" code for names # ======================================================= # Soundex script # by # Mendel Cooper # thegrendel.abs@gmail.com # reldate: 23 January, 2002 # # Placed in the Public Domain. # # A slightly different version of this script appeared in #+ Ed Schaefer's July, 2002 "Shell Corner" column #+ in "Unix Review" on-line, #+ http://www.unixreview.com/documents/uni1026336632258/ # ======================================================= Appendix A. Contributed Scripts 557
- 564. Advanced Bash-Scripting Guide ARGCOUNT=1 # Need name as argument. E_WRONGARGS=90 if [ $# -ne "$ARGCOUNT" ] then echo "Usage: `basename $0` name" exit $E_WRONGARGS fi assign_value () # Assigns numerical value { #+ to letters of name. val1=bfpv # 'b,f,p,v' = 1 val2=cgjkqsxz # 'c,g,j,k,q,s,x,z' = 2 val3=dt # etc. val4=l val5=mn val6=r # Exceptionally clever use of 'tr' follows. # Try to figure out what is going on here. value=$( echo "$1" | tr -d wh | tr $val1 1 | tr $val2 2 | tr $val3 3 | tr $val4 4 | tr $val5 5 | tr $val6 6 | tr -s 123456 | tr -d aeiouy ) # Assign letter values. # Remove duplicate numbers, except when separated by vowels. # Ignore vowels, except as separators, so delete them last. # Ignore 'w' and 'h', even as separators, so delete them first. # # The above command substitution lays more pipe than a plumber <g>. } input_name="$1" echo echo "Name = $input_name" # Change all characters of name input to lowercase. # ------------------------------------------------ name=$( echo $input_name | tr A-Z a-z ) # ------------------------------------------------ # Just in case argument to script is mixed case. # Prefix of soundex code: first letter of name. # -------------------------------------------- char_pos=0 # Initialize character position. prefix0=${name:$char_pos:1} prefix=`echo $prefix0 | tr a-z A-Z` # Uppercase 1st letter of soundex. Appendix A. Contributed Scripts 558
- 565. Advanced Bash-Scripting Guide let "char_pos += 1" # Bump character position to 2nd letter of name. name1=${name:$char_pos} # ++++++++++++++++++++++++++ Exception Patch ++++++++++++++++++++++++++++++ # Now, we run both the input name and the name shifted one char #+ to the right through the value-assigning function. # If we get the same value out, that means that the first two characters #+ of the name have the same value assigned, and that one should cancel. # However, we also need to test whether the first letter of the name #+ is a vowel or 'w' or 'h', because otherwise this would bollix things up. char1=`echo $prefix | tr A-Z a-z` # First letter of name, lowercased. assign_value $name s1=$value assign_value $name1 s2=$value assign_value $char1 s3=$value s3=9$s3 # If first letter of name is a vowel #+ or 'w' or 'h', #+ then its "value" will be null (unset). #+ Therefore, set it to 9, an otherwise #+ unused value, which can be tested for. if [[ "$s1" -ne "$s2" || "$s3" -eq 9 ]] then suffix=$s2 else suffix=${s2:$char_pos} fi # ++++++++++++++++++++++ end Exception Patch ++++++++++++++++++++++++++++++ padding=000 # Use at most 3 zeroes to pad. soun=$prefix$suffix$padding # Pad with zeroes. MAXLEN=4 # Truncate to maximum of 4 chars. soundex=${soun:0:$MAXLEN} echo "Soundex = $soundex" echo # The soundex code is a method of indexing and classifying names #+ by grouping together the ones that sound alike. # The soundex code for a given name is the first letter of the name, #+ followed by a calculated three-number code. # Similar sounding names should have almost the same soundex codes. # Examples: # Smith and Smythe both have a "S-530" soundex. # Harrison = H-625 # Hargison = H-622 # Harriman = H-655 # This works out fairly well in practice, but there are numerous anomalies. # Appendix A. Contributed Scripts 559
- 566. Advanced Bash-Scripting Guide # # The U.S. Census and certain other governmental agencies use soundex, # as do genealogical researchers. # # For more information, #+ see the "National Archives and Records Administration home page", #+ http://www.nara.gov/genealogy/soundex/soundex.html # Exercise: # -------- # Simplify the "Exception Patch" section of this script. exit 0 Example A-10. Game of Life #!/bin/bash # life.sh: "Life in the Slow Lane" # Version 0.2: Patched by Daniel Albers #+ to allow non-square grids as input. # Version 0.2.1: Added 2-second delay between generations. # ##################################################################### # # This is the Bash script version of John Conway's "Game of Life". # # "Life" is a simple implementation of cellular automata. # # --------------------------------------------------------------------- # # On a rectangular grid, let each "cell" be either "living" or "dead." # # Designate a living cell with a dot, and a dead one with a blank space.# # Begin with an arbitrarily drawn dot-and-blank grid, # #+ and let this be the starting generation, "generation 0." # # Determine each successive generation by the following rules: # # 1) Each cell has 8 neighbors, the adjoining cells # #+ left, right, top, bottom, and the 4 diagonals. # # # # 123 # # 4*5 The * is the cell under consideration. # # 678 # # # # 2) A living cell with either 2 or 3 living neighbors remains alive. # SURVIVE=2 # # 3) A dead cell with 3 living neighbors comes alive (a "birth"). # BIRTH=3 # # 4) All other cases result in a dead cell for the next generation. # # ##################################################################### # startfile=gen0 # Read the starting generation from the file "gen0" ... # Default, if no other file specified when invoking script. # if [ -n "$1" ] # Specify another "generation 0" file. then startfile="$1" fi ############################################ # Abort script if "startfile" not specified #+ and Appendix A. Contributed Scripts 560
- 567. Advanced Bash-Scripting Guide #+ default file "gen0" not present. E_NOSTARTFILE=86 if [ ! -e "$startfile" ] then echo "Startfile ""$startfile"" missing!" exit $E_NOSTARTFILE fi ############################################ ALIVE1=. DEAD1=_ # Represent living and dead cells in the start-up file. # ---------------------------------------------------------- # # This script uses a 10 x 10 grid (may be increased, #+ but a large grid will slow execution). ROWS=10 COLS=10 # Change above two variables to match grid size, as desired. # ---------------------------------------------------------- # GENERATIONS=10 # How many generations to cycle through. # Adjust this upwards #+ if you have time on your hands. NONE_ALIVE=85 # Exit status on premature bailout, #+ if no cells left alive. DELAY=2 # Pause between generations, etc. TRUE=0 FALSE=1 ALIVE=0 DEAD=1 avar= # Global; holds current generation. generation=0 # Initialize generation count. # ================================================================= let "cells = $ROWS * $COLS" # How many cells. # Arrays containing "cells." declare -a initial declare -a current display () { alive=0 # How many cells alive at any given time. # Initially zero. declare -a arr arr=( `echo "$1"` ) # Convert passed arg to array. element_count=${#arr[*]} local i local rowcheck for ((i=0; i<$element_count; i++)) Appendix A. Contributed Scripts 561
- 568. Advanced Bash-Scripting Guide do # Insert newline at end of each row. let "rowcheck = $i % COLS" if [ "$rowcheck" -eq 0 ] then echo # Newline. echo -n " " # Indent. fi cell=${arr[i]} if [ "$cell" = . ] then let "alive += 1" fi echo -n "$cell" | sed -e 's/_/ /g' # Print out array, changing underscores to spaces. done return } IsValid () # Test whether cell coordinate valid. { if [ -z "$1" -o -z "$2" ] # Mandatory arguments missing? then return $FALSE fi local row local lower_limit=0 # Disallow negative coordinate. local upper_limit local left local right let "upper_limit = $ROWS * $COLS - 1" # Total number of cells. if [ "$1" -lt "$lower_limit" -o "$1" -gt "$upper_limit" ] then return $FALSE # Out of array bounds. fi row=$2 let "left = $row * $COLS" # Left limit. let "right = $left + $COLS - 1" # Right limit. if [ "$1" -lt "$left" -o "$1" -gt "$right" ] then return $FALSE # Beyond row boundary. fi return $TRUE # Valid coordinate. } IsAlive () # Test whether cell is alive. Appendix A. Contributed Scripts 562
- 569. Advanced Bash-Scripting Guide # Takes array, cell number, and { #+ state of cell as arguments. GetCount "$1" $2 # Get alive cell count in neighborhood. local nhbd=$? if [ "$nhbd" -eq "$BIRTH" ] # Alive in any case. then return $ALIVE fi if [ "$3" = "." -a "$nhbd" -eq "$SURVIVE" ] then # Alive only if previously alive. return $ALIVE fi return $DEAD # Dead, by default. } GetCount () # Count live cells in passed cell's neighborhood. # Two arguments needed: # $1) variable holding array # $2) cell number { local cell_number=$2 local array local top local center local bottom local r local row local i local t_top local t_cen local t_bot local count=0 local ROW_NHBD=3 array=( `echo "$1"` ) let "top = $cell_number - $COLS - 1" # Set up cell neighborhood. let "center = $cell_number - 1" let "bottom = $cell_number + $COLS - 1" let "r = $cell_number / $COLS" for ((i=0; i<$ROW_NHBD; i++)) # Traverse from left to right. do let "t_top = $top + $i" let "t_cen = $center + $i" let "t_bot = $bottom + $i" let "row = $r" # Count center row. IsValid $t_cen $row # Valid cell position? if [ $? -eq "$TRUE" ] then if [ ${array[$t_cen]} = "$ALIVE1" ] # Is it alive? then # If yes, then ... let "count += 1" # Increment count. fi fi Appendix A. Contributed Scripts 563
- 570. Advanced Bash-Scripting Guide let "row = $r - 1" # Count top row. IsValid $t_top $row if [ $? -eq "$TRUE" ] then if [ ${array[$t_top]} = "$ALIVE1" ] # Redundancy here. then # Can be optimized? let "count += 1" fi fi let "row = $r + 1" # Count bottom row. IsValid $t_bot $row if [ $? -eq "$TRUE" ] then if [ ${array[$t_bot]} = "$ALIVE1" ] then let "count += 1" fi fi done if [ ${array[$cell_number]} = "$ALIVE1" ] then let "count -= 1" # Make sure value of tested cell itself fi #+ is not counted. return $count } next_gen () # Update generation array. { local array local i=0 array=( `echo "$1"` ) # Convert passed arg to array. while [ "$i" -lt "$cells" ] do IsAlive "$1" $i ${array[$i]} # Is cell alive? if [ $? -eq "$ALIVE" ] then # If alive, then array[$i]=. #+ represent the cell as a period. else array[$i]="_" # Otherwise underscore fi #+ (will later be converted to space). let "i += 1" done # let "generation += 1" # Increment generation count. # Why was the above line commented out? # Set variable to pass as parameter to "display" function. avar=`echo ${array[@]}` # Convert array back to string variable. display "$avar" # Display it. Appendix A. Contributed Scripts 564
- 571. Advanced Bash-Scripting Guide echo; echo echo "Generation $generation - $alive alive" if [ "$alive" -eq 0 ] then echo echo "Premature exit: no more cells alive!" exit $NONE_ALIVE # No point in continuing fi #+ if no live cells. } # ========================================================= # main () # Load initial array with contents of startup file. initial=( `cat "$startfile" | sed -e '/#/d' | tr -d 'n' | # Delete lines containing '#' comment character. sed -e 's/./. /g' -e 's/_/_ /g'` ) # Remove linefeeds and insert space between elements. clear # Clear screen. echo # Title setterm -reverse on echo "=======================" setterm -reverse off echo " $GENERATIONS generations" echo " of" echo ""Life in the Slow Lane"" setterm -reverse on echo "=======================" setterm -reverse off sleep $DELAY # Display "splash screen" for 2 seconds. # -------- Display first generation. -------- Gen0=`echo ${initial[@]}` display "$Gen0" # Display only. echo; echo echo "Generation $generation - $alive alive" sleep $DELAY # ------------------------------------------- let "generation += 1" # Bump generation count. echo # ------- Display second generation. ------- Cur=`echo ${initial[@]}` next_gen "$Cur" # Update & display. sleep $DELAY # ------------------------------------------ let "generation += 1" # Increment generation count. # ------ Main loop for displaying subsequent generations ------ while [ "$generation" -le "$GENERATIONS" ] do Appendix A. Contributed Scripts 565
- 572. Advanced Bash-Scripting Guide Cur="$avar" next_gen "$Cur" let "generation += 1" sleep $DELAY done # ============================================================== echo exit 0 # CEOF:EOF # The grid in this script has a "boundary problem." # The the top, bottom, and sides border on a void of dead cells. # Exercise: Change the script to have the grid wrap around, # + so that the left and right sides will "touch," # + as will the top and bottom. # # Exercise: Create a new "gen0" file to seed this script. # Use a 12 x 16 grid, instead of the original 10 x 10 one. # Make the necessary changes to the script, #+ so it will run with the altered file. # # Exercise: Modify this script so that it can determine the grid size #+ from the "gen0" file, and set any variables necessary #+ for the script to run. # This would make unnecessary any changes to variables #+ in the script for an altered grid size. # # Exercise: Optimize this script. # It has some redundant code. Example A-11. Data file for Game of Life # gen0 # # This is an example "generation 0" start-up file for "life.sh". # -------------------------------------------------------------- # The "gen0" file is a 10 x 10 grid using a period (.) for live cells, #+ and an underscore (_) for dead ones. We cannot simply use spaces #+ for dead cells in this file because of a peculiarity in Bash arrays. # [Exercise for the reader: explain this.] # # Lines beginning with a '#' are comments, and the script ignores them. __.__..___ ___._.____ ____.___.. _._______. ____._____ ..__...___ ____._____ ___...____ __.._..___ _..___..__ +++ The following script is by Mark Moraes of the University of Toronto. See the file Moraes-COPYRIGHT for permissions and restrictions. This file is included in the combined HTML/source tarball of the ABS Guide. Appendix A. Contributed Scripts 566
- 573. Advanced Bash-Scripting Guide Example A-12. behead: Removing mail and news message headers #! /bin/sh # Strips off the header from a mail/News message i.e. till the first # empty line. # Author: Mark Moraes, University of Toronto # ==> These comments added by author of this document. if [ $# -eq 0 ]; then # ==> If no command-line args present, then works on file redirected to stdin. sed -e '1,/^$/d' -e '/^[ ]*$/d' # --> Delete empty lines and all lines until # --> first one beginning with white space. else # ==> If command-line args present, then work on files named. for i do sed -e '1,/^$/d' -e '/^[ ]*$/d' $i # --> Ditto, as above. done fi exit # ==> Exercise: Add error checking and other options. # ==> # ==> Note that the small sed script repeats, except for the arg passed. # ==> Does it make sense to embed it in a function? Why or why not? /* * Copyright University of Toronto 1988, 1989. * Written by Mark Moraes * * Permission is granted to anyone to use this software for any purpose on * any computer system, and to alter it and redistribute it freely, subject * to the following restrictions: * * 1. The author and the University of Toronto are not responsible * for the consequences of use of this software, no matter how awful, * even if they arise from flaws in it. * * 2. The origin of this software must not be misrepresented, either by * explicit claim or by omission. Since few users ever read sources, * credits must appear in the documentation. * * 3. Altered versions must be plainly marked as such, and must not be * misrepresented as being the original software. Since few users * ever read sources, credits must appear in the documentation. * * 4. This notice may not be removed or altered. */ + Antek Sawicki contributed the following script, which makes very clever use of the parameter substitution operators discussed in Section 9.3. Example A-13. password: Generating random 8-character passwords Appendix A. Contributed Scripts 567
- 574. Advanced Bash-Scripting Guide #!/bin/bash # May need to be invoked with #!/bin/bash2 on older machines. # # Random password generator for Bash 2.x + #+ by Antek Sawicki <tenox@tenox.tc>, #+ who generously gave usage permission to the ABS Guide author. # # ==> Comments added by document author ==> MATRIX="0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" # ==> Password will consist of alphanumeric characters. LENGTH="8" # ==> May change 'LENGTH' for longer password. while [ "${n:=1}" -le "$LENGTH" ] # ==> Recall that := is "default substitution" operator. # ==> So, if 'n' has not been initialized, set it to 1. do PASS="$PASS${MATRIX:$(($RANDOM%${#MATRIX})):1}" # ==> Very clever, but tricky. # ==> Starting from the innermost nesting... # ==> ${#MATRIX} returns length of array MATRIX. # ==> $RANDOM%${#MATRIX} returns random number between 1 # ==> and [length of MATRIX] - 1. # ==> ${MATRIX:$(($RANDOM%${#MATRIX})):1} # ==> returns expansion of MATRIX at random position, by length 1. # ==> See {var:pos:len} parameter substitution in Chapter 9. # ==> and the associated examples. # ==> PASS=... simply pastes this result onto previous PASS (concatenation). # ==> To visualize this more clearly, uncomment the following line # echo "$PASS" # ==> to see PASS being built up, # ==> one character at a time, each iteration of the loop. let n+=1 # ==> Increment 'n' for next pass. done echo "$PASS" # ==> Or, redirect to a file, as desired. exit 0 + James R. Van Zandt contributed this script which uses named pipes and, in his words, "really exercises quoting and escaping." Example A-14. fifo: Making daily backups, using named pipes #!/bin/bash # ==> Script by James R. Van Zandt, and used here with his permission. # ==> Comments added by author of this document. Appendix A. Contributed Scripts 568
- 575. Advanced Bash-Scripting Guide HERE=`uname -n` # ==> hostname THERE=bilbo echo "starting remote backup to $THERE at `date +%r`" # ==> `date +%r` returns time in 12-hour format, i.e. "08:08:34 PM". # make sure /pipe really is a pipe and not a plain file rm -rf /pipe mkfifo /pipe # ==> Create a "named pipe", named "/pipe" ... # ==> 'su xyz' runs commands as user "xyz". # ==> 'ssh' invokes secure shell (remote login client). su xyz -c "ssh $THERE "cat > /home/xyz/backup/${HERE}-daily.tar.gz" < /pipe"& cd / tar -czf - bin boot dev etc home info lib man root sbin share usr var > /pipe # ==> Uses named pipe, /pipe, to communicate between processes: # ==> 'tar/gzip' writes to /pipe and 'ssh' reads from /pipe. # ==> The end result is this backs up the main directories, from / on down. # ==> What are the advantages of a "named pipe" in this situation, # ==>+ as opposed to an "anonymous pipe", with |? # ==> Will an anonymous pipe even work here? # ==> Is it necessary to delete the pipe before exiting the script? # ==> How could that be done? exit 0 + Stéphane Chazelas used the following script to demonstrate generating prime numbers without arrays. Example A-15. Generating prime numbers using the modulo operator #!/bin/bash # primes.sh: Generate prime numbers, without using arrays. # Script contributed by Stephane Chazelas. # This does *not* use the classic "Sieve of Eratosthenes" algorithm, #+ but instead the more intuitive method of testing each candidate number #+ for factors (divisors), using the "%" modulo operator. LIMIT=1000 # Primes, 2 ... 1000. Primes() { (( n = $1 + 1 )) # Bump to next integer. shift # Next parameter in list. # echo "_n=$n i=$i_" if (( n == LIMIT )) then echo $* return fi Appendix A. Contributed Scripts 569
- 576. Advanced Bash-Scripting Guide for i; do # "i" set to "@", previous values of $n. # echo "-n=$n i=$i-" (( i * i > n )) && break # Optimization. (( n % i )) && continue # Sift out non-primes using modulo operator. Primes $n $@ # Recursion inside loop. return done Primes $n $@ $n # Recursion outside loop. # Successively accumulate #+ positional parameters. # "$@" is the accumulating list of primes. } Primes 1 exit $? # Pipe output of the script to 'fmt' for prettier printing. # Uncomment lines 16 and 24 to help figure out what is going on. # Compare the speed of this algorithm for generating primes #+ with the Sieve of Eratosthenes (ex68.sh). # Exercise: Rewrite this script without recursion. + Rick Boivie's revision of Jordi Sanfeliu's tree script. Example A-16. tree: Displaying a directory tree #!/bin/bash # tree.sh # Written by Rick Boivie. # Used with permission. # This is a revised and simplified version of a script #+ by Jordi Sanfeliu (the original author), and patched by Ian Kjos. # This script replaces the earlier version used in #+ previous releases of the Advanced Bash Scripting Guide. # Copyright (c) 2002, by Jordi Sanfeliu, Rick Boivie, and Ian Kjos. # ==> Comments added by the author of this document. search () { for dir in `echo *` # ==> `echo *` lists all the files in current working directory, #+ ==> without line breaks. # ==> Similar effect to for dir in * # ==> but "dir in `echo *`" will not handle filenames with blanks. do if [ -d "$dir" ] ; then # ==> If it is a directory (-d)... zz=0 # ==> Temp variable, keeping track of # directory level. while [ $zz != $1 ] # Keep track of inner nested loop. Appendix A. Contributed Scripts 570
- 577. Advanced Bash-Scripting Guide do echo -n "| " # ==> Display vertical connector symbol, # ==> with 2 spaces & no line feed # in order to indent. zz=`expr $zz + 1` # ==> Increment zz. done if [ -L "$dir" ] ; then # ==> If directory is a symbolic link... echo "+---$dir" `ls -l $dir | sed 's/^.*'$dir' //'` # ==> Display horiz. connector and list directory name, but... # ==> delete date/time part of long listing. else echo "+---$dir" # ==> Display horizontal connector symbol... # ==> and print directory name. numdirs=`expr $numdirs + 1` # ==> Increment directory count. if cd "$dir" ; then # ==> If can move to subdirectory... search `expr $1 + 1` # with recursion ;-) # ==> Function calls itself. cd .. fi fi fi done } if [ $# != 0 ] ; then cd $1 # Move to indicated directory. #else # stay in current directory fi echo "Initial directory = `pwd`" numdirs=0 search 0 echo "Total directories = $numdirs" exit 0 Patsie's version of a directory tree script. Example A-17. tree2: Alternate directory tree script #!/bin/bash # tree2.sh # Lightly modified/reformatted by ABS Guide author. # Included in ABS Guide with permission of script author (thanks!). ## Recursive file/dirsize checking script, by Patsie ## ## This script builds a list of files/directories and their size (du -akx) ## and processes this list to a human readable tree shape ## The 'du -akx' is only as good as the permissions the owner has. ## So preferably run as root* to get the best results, or use only on ## directories for which you have read permissions. Anything you can't ## read is not in the list. #* ABS Guide author advises caution when running scripts as root! ########## THIS IS CONFIGURABLE ########## Appendix A. Contributed Scripts 571
- 578. Advanced Bash-Scripting Guide TOP=5 # Top 5 biggest (sub)directories. MAXRECURS=5 # Max 5 subdirectories/recursions deep. E_BL=80 # Blank line already returned. E_DIR=81 # Directory not specified. ########## DON'T CHANGE ANYTHING BELOW THIS LINE ########## PID=$$ # Our own process ID. SELF=`basename $0` # Our own program name. TMP="/tmp/${SELF}.${PID}.tmp" # Temporary 'du' result. # Convert number to dotted thousand. function dot { echo " $*" | sed -e :a -e 's/(.*[0-9])([0-9]{3})/1,2/;ta' | tail -c 12; } # Usage: tree <recursion> <indent prefix> <min size> <directory> function tree { recurs="$1" # How deep nested are we? prefix="$2" # What do we display before file/dirname? minsize="$3" # What is the minumum file/dirsize? dirname="$4" # Which directory are we checking? # Get ($TOP) biggest subdirs/subfiles from TMP file. LIST=`egrep "[[:space:]]${dirname}/[^/]*$" "$TMP" | awk '{if($1>'$minsize') print;}' | sort -nr | head -$TOP` [ -z "$LIST" ] && return # Empty list, then go back. cnt=0 num=`echo "$LIST" | wc -l` # How many entries in the list. ## Main loop echo "$LIST" | while read size name; do ((cnt+=1)) # Count entry number. bname=`basename "$name"` # We only need a basename of the entry. [ -d "$name" ] && bname="$bname/" # If it's a directory, append a slash. echo "`dot $size`$prefix +-$bname" # Display the result. # Call ourself recursively if it's a directory #+ and we're not nested too deep ($MAXRECURS). # The recursion goes up: $((recurs+1)) # The prefix gets a space if it's the last entry, #+ or a pipe if there are more entries. # The minimum file/dirsize becomes #+ a tenth of his parent: $((size/10)). # Last argument is the full directory name to check. if [ -d "$name" -a $recurs -lt $MAXRECURS ]; then [ $cnt -lt $num ] || (tree $((recurs+1)) "$prefix " $((size/10)) "$name") && (tree $((recurs+1)) "$prefix |" $((size/10)) "$name") fi done [ $? -eq 0 ] && echo " $prefix" # Every time we jump back add a 'blank' line. return $E_BL # We return 80 to tell we added a blank line already. } Appendix A. Contributed Scripts 572
- 579. Advanced Bash-Scripting Guide ### ### ### main program ### ### ### rootdir="$@" [ -d "$rootdir" ] || { echo "$SELF: Usage: $SELF <directory>" >&2; exit $E_DIR; } # We should be called with a directory name. echo "Building inventory list, please wait ..." # Show "please wait" message. du -akx "$rootdir" 1>"$TMP" 2>/dev/null # Build a temporary list of all files/dirs and their size. size=`tail -1 "$TMP" | awk '{print $1}'` # What is our rootdirectory's size? echo "`dot $size` $rootdir" # Display rootdirectory's entry. tree 0 "" 0 "$rootdir" # Display the tree below our rootdirectory. rm "$TMP" 2>/dev/null # Clean up TMP file. exit $? Noah Friedman permitted use of his string function script. It essentially reproduces some of the C-library string manipulation functions. Example A-18. string functions: C-style string functions #!/bin/bash # string.bash --- bash emulation of string(3) library routines # Author: Noah Friedman <friedman@prep.ai.mit.edu> # ==> Used with his kind permission in this document. # Created: 1992-07-01 # Last modified: 1993-09-29 # Public domain # Conversion to bash v2 syntax done by Chet Ramey # Commentary: # Code: #:docstring strcat: # Usage: strcat s1 s2 # # Strcat appends the value of variable s2 to variable s1. # # Example: # a="foo" # b="bar" # strcat a b # echo $a # => foobar # #:end docstring: ###;;;autoload ==> Autoloading of function commented out. function strcat () Appendix A. Contributed Scripts 573
- 580. Advanced Bash-Scripting Guide { local s1_val s2_val s1_val=${!1} # indirect variable expansion s2_val=${!2} eval "$1"='"${s1_val}${s2_val}"' # ==> eval $1='${s1_val}${s2_val}' avoids problems, # ==> if one of the variables contains a single quote. } #:docstring strncat: # Usage: strncat s1 s2 $n # # Line strcat, but strncat appends a maximum of n characters from the value # of variable s2. It copies fewer if the value of variabl s2 is shorter # than n characters. Echoes result on stdout. # # Example: # a=foo # b=barbaz # strncat a b 3 # echo $a # => foobar # #:end docstring: ###;;;autoload function strncat () { local s1="$1" local s2="$2" local -i n="$3" local s1_val s2_val s1_val=${!s1} # ==> indirect variable expansion s2_val=${!s2} if [ ${#s2_val} -gt ${n} ]; then s2_val=${s2_val:0:$n} # ==> substring extraction fi eval "$s1"='"${s1_val}${s2_val}"' # ==> eval $1='${s1_val}${s2_val}' avoids problems, # ==> if one of the variables contains a single quote. } #:docstring strcmp: # Usage: strcmp $s1 $s2 # # Strcmp compares its arguments and returns an integer less than, equal to, # or greater than zero, depending on whether string s1 is lexicographically # less than, equal to, or greater than string s2. #:end docstring: ###;;;autoload function strcmp () { [ "$1" = "$2" ] && return 0 [ "${1}" '<' "${2}" ] > /dev/null && return -1 return 1 Appendix A. Contributed Scripts 574
- 581. Advanced Bash-Scripting Guide } #:docstring strncmp: # Usage: strncmp $s1 $s2 $n # # Like strcmp, but makes the comparison by examining a maximum of n # characters (n less than or equal to zero yields equality). #:end docstring: ###;;;autoload function strncmp () { if [ -z "${3}" -o "${3}" -le "0" ]; then return 0 fi if [ ${3} -ge ${#1} -a ${3} -ge ${#2} ]; then strcmp "$1" "$2" return $? else s1=${1:0:$3} s2=${2:0:$3} strcmp $s1 $s2 return $? fi } #:docstring strlen: # Usage: strlen s # # Strlen returns the number of characters in string literal s. #:end docstring: ###;;;autoload function strlen () { eval echo "${#${1}}" # ==> Returns the length of the value of the variable # ==> whose name is passed as an argument. } #:docstring strspn: # Usage: strspn $s1 $s2 # # Strspn returns the length of the maximum initial segment of string s1, # which consists entirely of characters from string s2. #:end docstring: ###;;;autoload function strspn () { # Unsetting IFS allows whitespace to be handled as normal chars. local IFS= local result="${1%%[!${2}]*}" echo ${#result} } #:docstring strcspn: # Usage: strcspn $s1 $s2 # # Strcspn returns the length of the maximum initial segment of string s1, Appendix A. Contributed Scripts 575
- 582. Advanced Bash-Scripting Guide # which consists entirely of characters not from string s2. #:end docstring: ###;;;autoload function strcspn () { # Unsetting IFS allows whitspace to be handled as normal chars. local IFS= local result="${1%%[${2}]*}" echo ${#result} } #:docstring strstr: # Usage: strstr s1 s2 # # Strstr echoes a substring starting at the first occurrence of string s2 in # string s1, or nothing if s2 does not occur in the string. If s2 points to # a string of zero length, strstr echoes s1. #:end docstring: ###;;;autoload function strstr () { # if s2 points to a string of zero length, strstr echoes s1 [ ${#2} -eq 0 ] && { echo "$1" ; return 0; } # strstr echoes nothing if s2 does not occur in s1 case "$1" in *$2*) ;; *) return 1;; esac # use the pattern matching code to strip off the match and everything # following it first=${1/$2*/} # then strip off the first unmatched portion of the string echo "${1##$first}" } #:docstring strtok: # Usage: strtok s1 s2 # # Strtok considers the string s1 to consist of a sequence of zero or more # text tokens separated by spans of one or more characters from the # separator string s2. The first call (with a non-empty string s1 # specified) echoes a string consisting of the first token on stdout. The # function keeps track of its position in the string s1 between separate # calls, so that subsequent calls made with the first argument an empty # string will work through the string immediately following that token. In # this way subsequent calls will work through the string s1 until no tokens # remain. The separator string s2 may be different from call to call. # When no token remains in s1, an empty value is echoed on stdout. #:end docstring: ###;;;autoload function strtok () { : } Appendix A. Contributed Scripts 576
- 583. Advanced Bash-Scripting Guide #:docstring strtrunc: # Usage: strtrunc $n $s1 {$s2} {$...} # # Used by many functions like strncmp to truncate arguments for comparison. # Echoes the first n characters of each string s1 s2 ... on stdout. #:end docstring: ###;;;autoload function strtrunc () { n=$1 ; shift for z; do echo "${z:0:$n}" done } # provide string # string.bash ends here # ========================================================================== # # ==> Everything below here added by the document author. # ==> Suggested use of this script is to delete everything below here, # ==> and "source" this file into your own scripts. # strcat string0=one string1=two echo echo "Testing "strcat" function:" echo "Original "string0" = $string0" echo ""string1" = $string1" strcat string0 string1 echo "New "string0" = $string0" echo # strlen echo echo "Testing "strlen" function:" str=123456789 echo ""str" = $str" echo -n "Length of "str" = " strlen str echo # Exercise: # -------- # Add code to test all the other string functions above. exit 0 Michael Zick's complex array example uses the md5sum check sum command to encode directory information. Example A-19. Directory information Appendix A. Contributed Scripts 577
- 584. Advanced Bash-Scripting Guide #! /bin/bash # directory-info.sh # Parses and lists directory information. # NOTE: Change lines 273 and 353 per "README" file. # Michael Zick is the author of this script. # Used here with his permission. # Controls # If overridden by command arguments, they must be in the order: # Arg1: "Descriptor Directory" # Arg2: "Exclude Paths" # Arg3: "Exclude Directories" # # Environment Settings override Defaults. # Command arguments override Environment Settings. # Default location for content addressed file descriptors. MD5UCFS=${1:-${MD5UCFS:-'/tmpfs/ucfs'}} # Directory paths never to list or enter declare -a EXCLUDE_PATHS=${2:-${EXCLUDE_PATHS:-'(/proc /dev /devfs /tmpfs)'}} # Directories never to list or enter declare -a EXCLUDE_DIRS=${3:-${EXCLUDE_DIRS:-'(ucfs lost+found tmp wtmp)'}} # Files never to list or enter declare -a EXCLUDE_FILES=${3:-${EXCLUDE_FILES:-'(core "Name with Spaces")'}} # Here document used as a comment block. : <<LSfieldsDoc # # # # # List Filesystem Directory Information # # # # # # # ListDirectory "FileGlob" "Field-Array-Name" # or # ListDirectory -of "FileGlob" "Field-Array-Filename" # '-of' meaning 'output to filename' # # # # # String format description based on: ls (GNU fileutils) version 4.0.36 Produces a line (or more) formatted: inode permissions hard-links owner group ... 32736 -rw------- 1 mszick mszick size day month date hh:mm:ss year path 2756608 Sun Apr 20 08:53:06 2003 /home/mszick/core Unless it is formatted: inode permissions hard-links owner group ... 266705 crw-rw---- 1 root uucp major minor day month date hh:mm:ss year path 4, 68 Sun Apr 20 09:27:33 2003 /dev/ttyS4 NOTE: that pesky comma after the major number NOTE: the 'path' may be multiple fields: Appendix A. Contributed Scripts 578
- 585. Advanced Bash-Scripting Guide /home/mszick/core /proc/982/fd/0 -> /dev/null /proc/982/fd/1 -> /home/mszick/.xsession-errors /proc/982/fd/13 -> /tmp/tmpfZVVOCs (deleted) /proc/982/fd/7 -> /tmp/kde-mszick/ksycoca /proc/982/fd/8 -> socket:[11586] /proc/982/fd/9 -> pipe:[11588] If that isn't enough to keep your parser guessing, either or both of the path components may be relative: ../Built-Shared -> Built-Static ../linux-2.4.20.tar.bz2 -> ../../../SRCS/linux-2.4.20.tar.bz2 The first character of the 11 (10?) character permissions field: 's' Socket 'd' Directory 'b' Block device 'c' Character device 'l' Symbolic link NOTE: Hard links not marked - test for identical inode numbers on identical filesystems. All information about hard linked files are shared, except for the names and the name's location in the directory system. NOTE: A "Hard link" is known as a "File Alias" on some systems. '-' An undistingushed file Followed by three groups of letters for: User, Group, Others Character 1: '-' Not readable; 'r' Readable Character 2: '-' Not writable; 'w' Writable Character 3, User and Group: Combined execute and special '-' Not Executable, Not Special 'x' Executable, Not Special 's' Executable, Special 'S' Not Executable, Special Character 3, Others: Combined execute and sticky (tacky?) '-' Not Executable, Not Tacky 'x' Executable, Not Tacky 't' Executable, Tacky 'T' Not Executable, Tacky Followed by an access indicator Haven't tested this one, it may be the eleventh character or it may generate another field ' ' No alternate access '+' Alternate access LSfieldsDoc ListDirectory() { local -a T local -i of=0 # Default return in variable # OLD_IFS=$IFS # Using BASH default ' tn' case "$#" in 3) case "$1" in -of) of=1 ; shift ;; * ) return 1 ;; esac ;; 2) : ;; # Poor man's "continue" *) return 1 ;; esac Appendix A. Contributed Scripts 579
- 586. Advanced Bash-Scripting Guide # NOTE: the (ls) command is NOT quoted (") T=( $(ls --inode --ignore-backups --almost-all --directory --full-time --color=none --time=status --sort=none --format=long $1) ) case $of in # Assign T back to the array whose name was passed as $2 0) eval $2=( "${T[@]}" ) ;; # Write T into filename passed as $2 1) echo "${T[@]}" > "$2" ;; esac return 0 } # # # # # Is that string a legal number? # # # # # # # IsNumber "Var" # # # # # There has to be a better way, sigh... IsNumber() { local -i int if [ $# -eq 0 ] then return 1 else (let int=$1) 2>/dev/null return $? # Exit status of the let thread fi } # # # # # Index Filesystem Directory Information # # # # # # # IndexList "Field-Array-Name" "Index-Array-Name" # or # IndexList -if Field-Array-Filename Index-Array-Name # IndexList -of Field-Array-Name Index-Array-Filename # IndexList -if -of Field-Array-Filename Index-Array-Filename # # # # # : <<IndexListDoc Walk an array of directory fields produced by ListDirectory Having suppressed the line breaks in an otherwise line oriented report, build an index to the array element which starts each line. Each line gets two index entries, the first element of each line (inode) and the element that holds the pathname of the file. The first index entry pair (Line-Number==0) are informational: Index-Array-Name[0] : Number of "Lines" indexed Index-Array-Name[1] : "Current Line" pointer into Index-Array-Name The following index pairs (if any) hold element indexes into the Field-Array-Name per: Index-Array-Name[Line-Number * 2] : The "inode" field element. NOTE: This distance may be either +11 or +12 elements. Index-Array-Name[(Line-Number * 2) + 1] : The "pathname" element. NOTE: This distance may be a variable number of elements. Next line index pair for Line-Number+1. IndexListDoc Appendix A. Contributed Scripts 580
- 587. Advanced Bash-Scripting Guide IndexList() { local -a LIST # Local of listname passed local -a -i INDEX=( 0 0 ) # Local of index to return local -i Lidx Lcnt local -i if=0 of=0 # Default to variable names case "$#" in # Simplistic option testing 0) return 1 ;; 1) return 1 ;; 2) : ;; # Poor man's continue 3) case "$1" in -if) if=1 ;; -of) of=1 ;; * ) return 1 ;; esac ; shift ;; 4) if=1 ; of=1 ; shift ; shift ;; *) return 1 esac # Make local copy of list case "$if" in 0) eval LIST=( "${$1[@]}" ) ;; 1) LIST=( $(cat $1) ) ;; esac # Grok (grope?) the array Lcnt=${#LIST[@]} Lidx=0 until (( Lidx >= Lcnt )) do if IsNumber ${LIST[$Lidx]} then local -i inode name local ft inode=Lidx local m=${LIST[$Lidx+2]} # Hard Links field ft=${LIST[$Lidx+1]:0:1} # Fast-Stat case $ft in b) ((Lidx+=12)) ;; # Block device c) ((Lidx+=12)) ;; # Character device *) ((Lidx+=11)) ;; # Anything else esac name=Lidx case $ft in -) ((Lidx+=1)) ;; # The easy one b) ((Lidx+=1)) ;; # Block device c) ((Lidx+=1)) ;; # Character device d) ((Lidx+=1)) ;; # The other easy one l) ((Lidx+=3)) ;; # At LEAST two more fields # A little more elegance here would handle pipes, #+ sockets, deleted files - later. *) until IsNumber ${LIST[$Lidx]} || ((Lidx >= Lcnt)) do ((Lidx+=1)) done ;; # Not required esac INDEX[${#INDEX[*]}]=$inode Appendix A. Contributed Scripts 581
- 588. Advanced Bash-Scripting Guide INDEX[${#INDEX[*]}]=$name INDEX[0]=${INDEX[0]}+1 # One more "line" found # echo "Line: ${INDEX[0]} Type: $ft Links: $m Inode: # ${LIST[$inode]} Name: ${LIST[$name]}" else ((Lidx+=1)) fi done case "$of" in 0) eval $2=( "${INDEX[@]}" ) ;; 1) echo "${INDEX[@]}" > "$2" ;; esac return 0 # What could go wrong? } # # # # # Content Identify File # # # # # # # DigestFile Input-Array-Name Digest-Array-Name # or # DigestFile -if Input-FileName Digest-Array-Name # # # # # # Here document used as a comment block. : <<DigestFilesDoc The key (no pun intended) to a Unified Content File System (UCFS) is to distinguish the files in the system based on their content. Distinguishing files by their name is just, so, 20th Century. The content is distinguished by computing a checksum of that content. This version uses the md5sum program to generate a 128 bit checksum representative of the file's contents. There is a chance that two files having different content might generate the same checksum using md5sum (or any checksum). Should that become a problem, then the use of md5sum can be replace by a cyrptographic signature. But until then... The md5sum program is documented as outputting three fields (and it does), but when read it appears as two fields (array elements). This is caused by the lack of whitespace between the second and third field. So this function gropes the md5sum output and returns: [0] 32 character checksum in hexidecimal (UCFS filename) [1] Single character: ' ' text file, '*' binary file [2] Filesystem (20th Century Style) name Note: That name may be the character '-' indicating STDIN read. DigestFilesDoc DigestFile() { local if=0 # Default, variable name local -a T1 T2 case "$#" in 3) case "$1" in -if) if=1 ; shift ;; * ) return 1 ;; esac ;; 2) : ;; # Poor man's "continue" Appendix A. Contributed Scripts 582
- 589. Advanced Bash-Scripting Guide *) return 1 ;; esac case $if in 0) eval T1=( "${$1[@]}" ) T2=( $(echo ${T1[@]} | md5sum -) ) ;; 1) T2=( $(md5sum $1) ) ;; esac case ${#T2[@]} in 0) return 1 ;; 1) return 1 ;; 2) case ${T2[1]:0:1} in # SanScrit-2.0.5 *) T2[${#T2[@]}]=${T2[1]:1} T2[1]=* ;; *) T2[${#T2[@]}]=${T2[1]} T2[1]=" " ;; esac ;; 3) : ;; # Assume it worked *) return 1 ;; esac local -i len=${#T2[0]} if [ $len -ne 32 ] ; then return 1 ; fi eval $2=( "${T2[@]}" ) } # # # # # Locate File # # # # # # # LocateFile [-l] FileName Location-Array-Name # or # LocateFile [-l] -of FileName Location-Array-FileName # # # # # # A file location is Filesystem-id and inode-number # Here document used as a comment block. : <<StatFieldsDoc Based on stat, version 2.2 stat -t and stat -lt fields [0] name [1] Total size File - number of bytes Symbolic link - string length of pathname [2] Number of (512 byte) blocks allocated [3] File type and Access rights (hex) [4] User ID of owner [5] Group ID of owner [6] Device number [7] Inode number [8] Number of hard links [9] Device type (if inode device) Major [10] Device type (if inode device) Minor [11] Time of last access May be disabled in 'mount' with noatime atime of files changed by exec, read, pipe, utime, mknod (mmap?) atime of directories changed by addition/deletion of files Appendix A. Contributed Scripts 583
- 590. Advanced Bash-Scripting Guide [12] Time of last modification mtime of files changed by write, truncate, utime, mknod mtime of directories changed by addtition/deletion of files [13] Time of last change ctime reflects time of changed inode information (owner, group permissions, link count -*-*- Per: Return code: 0 Size of array: 14 Contents of array Element 0: /home/mszick Element 1: 4096 Element 2: 8 Element 3: 41e8 Element 4: 500 Element 5: 500 Element 6: 303 Element 7: 32385 Element 8: 22 Element 9: 0 Element 10: 0 Element 11: 1051221030 Element 12: 1051214068 Element 13: 1051214068 For a link in the form of linkname -> realname stat -t linkname returns the linkname (link) information stat -lt linkname returns the realname information stat -tf and stat -ltf fields [0] name [1] ID-0? # Maybe someday, but Linux stat structure [2] ID-0? # does not have either LABEL nor UUID # fields, currently information must come # from file-system specific utilities These will be munged into: [1] UUID if possible [2] Volume Label if possible Note: 'mount -l' does return the label and could return the UUID [3] Maximum length of filenames [4] Filesystem type [5] Total blocks in the filesystem [6] Free blocks [7] Free blocks for non-root user(s) [8] Block size of the filesystem [9] Total inodes [10] Free inodes -*-*- Per: Return code: 0 Size of array: 11 Contents of array Element 0: /home/mszick Element 1: 0 Element 2: 0 Element 3: 255 Element 4: ef53 Element 5: 2581445 Element 6: 2277180 Element 7: 2146050 Element 8: 4096 Appendix A. Contributed Scripts 584
- 591. Advanced Bash-Scripting Guide Element 9: 1311552 Element 10: 1276425 StatFieldsDoc # LocateFile [-l] FileName Location-Array-Name # LocateFile [-l] -of FileName Location-Array-FileName LocateFile() { local -a LOC LOC1 LOC2 local lk="" of=0 case "$#" in 0) return 1 ;; 1) return 1 ;; 2) : ;; *) while (( "$#" > 2 )) do case "$1" in -l) lk=-1 ;; -of) of=1 ;; *) return 1 ;; esac shift done ;; esac # More Sanscrit-2.0.5 # LOC1=( $(stat -t $lk $1) ) # LOC2=( $(stat -tf $lk $1) ) # Uncomment above two lines if system has "stat" command installed. LOC=( ${LOC1[@]:0:1} ${LOC1[@]:3:11} ${LOC2[@]:1:2} ${LOC2[@]:4:1} ) case "$of" in 0) eval $2=( "${LOC[@]}" ) ;; 1) echo "${LOC[@]}" > "$2" ;; esac return 0 # Which yields (if you are lucky, and have "stat" installed) # -*-*- Location Discriptor -*-*- # Return code: 0 # Size of array: 15 # Contents of array # Element 0: /home/mszick 20th Century name # Element 1: 41e8 Type and Permissions # Element 2: 500 User # Element 3: 500 Group # Element 4: 303 Device # Element 5: 32385 inode # Element 6: 22 Link count # Element 7: 0 Device Major # Element 8: 0 Device Minor # Element 9: 1051224608 Last Access # Element 10: 1051214068 Last Modify # Element 11: 1051214068 Last Status # Element 12: 0 UUID (to be) # Element 13: 0 Volume Label (to be) # Element 14: ef53 Filesystem type } Appendix A. Contributed Scripts 585
- 592. Advanced Bash-Scripting Guide # And then there was some test code ListArray() # ListArray Name { local -a Ta eval Ta=( "${$1[@]}" ) echo echo "-*-*- List of Array -*-*-" echo "Size of array $1: ${#Ta[*]}" echo "Contents of array $1:" for (( i=0 ; i<${#Ta[*]} ; i++ )) do echo -e "tElement $i: ${Ta[$i]}" done return 0 } declare -a CUR_DIR # For small arrays ListDirectory "${PWD}" CUR_DIR ListArray CUR_DIR declare -a DIR_DIG DigestFile CUR_DIR DIR_DIG echo "The new "name" (checksum) for ${CUR_DIR[9]} is ${DIR_DIG[0]}" declare -a DIR_ENT # BIG_DIR # For really big arrays - use a temporary file in ramdisk # BIG-DIR # ListDirectory -of "${CUR_DIR[11]}/*" "/tmpfs/junk2" ListDirectory "${CUR_DIR[11]}/*" DIR_ENT declare -a DIR_IDX # BIG-DIR # IndexList -if "/tmpfs/junk2" DIR_IDX IndexList DIR_ENT DIR_IDX declare -a IDX_DIG # BIG-DIR # DIR_ENT=( $(cat /tmpfs/junk2) ) # BIG-DIR # DigestFile -if /tmpfs/junk2 IDX_DIG DigestFile DIR_ENT IDX_DIG # Small (should) be able to parallize IndexList & DigestFile # Large (should) be able to parallize IndexList & DigestFile & the assignment echo "The "name" (checksum) for the contents of ${PWD} is ${IDX_DIG[0]}" declare -a FILE_LOC LocateFile ${PWD} FILE_LOC ListArray FILE_LOC exit 0 Stéphane Chazelas demonstrates object-oriented programming in a Bash script. Mariusz Gniazdowski contributed a hash library for use in scripts. Example A-20. Library of hash functions # Hash: Appendix A. Contributed Scripts 586
- 593. Advanced Bash-Scripting Guide # Hash function library # Author: Mariusz Gniazdowski <mariusz.gn-at-gmail.com> # Date: 2005-04-07 # Functions making emulating hashes in Bash a little less painful. # Limitations: # * Only global variables are supported. # * Each hash instance generates one global variable per value. # * Variable names collisions are possible #+ if you define variable like __hash__hashname_key # * Keys must use chars that can be part of a Bash variable name #+ (no dashes, periods, etc.). # * The hash is created as a variable: # ... hashname_keyname # So if somone will create hashes like: # myhash_ + mykey = myhash__mykey # myhash + _mykey = myhash__mykey # Then there will be a collision. # (This should not pose a major problem.) Hash_config_varname_prefix=__hash__ # Emulates: hash[key]=value # # Params: # 1 - hash # 2 - key # 3 - value function hash_set { eval "${Hash_config_varname_prefix}${1}_${2}="${3}"" } # Emulates: value=hash[key] # # Params: # 1 - hash # 2 - key # 3 - value (name of global variable to set) function hash_get_into { eval "$3="$${Hash_config_varname_prefix}${1}_${2}"" } # Emulates: echo hash[key] # # Params: # 1 - hash # 2 - key # 3 - echo params (like -n, for example) function hash_echo { eval "echo $3 "$${Hash_config_varname_prefix}${1}_${2}"" } # Emulates: hash1[key1]=hash2[key2] # # Params: Appendix A. Contributed Scripts 587
- 594. Advanced Bash-Scripting Guide # 1 - hash1 # 2 - key1 # 3 - hash2 # 4 - key2 function hash_copy { eval "${Hash_config_varname_prefix}${1}_${2} ="$${Hash_config_varname_prefix}${3}_${4}"" } # Emulates: hash[keyN-1]=hash[key2]=...hash[key1] # # Copies first key to rest of keys. # # Params: # 1 - hash1 # 2 - key1 # 3 - key2 # . . . # N - keyN function hash_dup { local hashName="$1" keyName="$2" shift 2 until [ ${#} -le 0 ]; do eval "${Hash_config_varname_prefix}${hashName}_${1} ="$${Hash_config_varname_prefix}${hashName}_${keyName}"" shift; done; } # Emulates: unset hash[key] # # Params: # 1 - hash # 2 - key function hash_unset { eval "unset ${Hash_config_varname_prefix}${1}_${2}" } # Emulates something similar to: ref=&hash[key] # # The reference is name of the variable in which value is held. # # Params: # 1 - hash # 2 - key # 3 - ref - Name of global variable to set. function hash_get_ref_into { eval "$3="${Hash_config_varname_prefix}${1}_${2}"" } # Emulates something similar to: echo &hash[key] # # That reference is name of variable in which value is held. # # Params: # 1 - hash # 2 - key # 3 - echo params (like -n for example) Appendix A. Contributed Scripts 588
- 595. Advanced Bash-Scripting Guide function hash_echo_ref { eval "echo $3 "${Hash_config_varname_prefix}${1}_${2}"" } # Emulates something similar to: $$hash[key](param1, param2, ...) # # Params: # 1 - hash # 2 - key # 3,4, ... - Function parameters function hash_call { local hash key hash=$1 key=$2 shift 2 eval "eval "$${Hash_config_varname_prefix}${hash}_${key} "$@""" } # Emulates something similar to: isset(hash[key]) or hash[key]==NULL # # Params: # 1 - hash # 2 - key # Returns: # 0 - there is such key # 1 - there is no such key function hash_is_set { eval "if [[ "${${Hash_config_varname_prefix}${1}_${2}-a}" = "a" && "${${Hash_config_varname_prefix}${1}_${2}-b}" = "b" ]] then return 1; else return 0; fi" } # Emulates something similar to: # foreach($hash as $key => $value) { fun($key,$value); } # # It is possible to write different variations of this function. # Here we use a function call to make it as "generic" as possible. # # Params: # 1 - hash # 2 - function name function hash_foreach { local keyname oldIFS="$IFS" IFS=' ' for i in $(eval "echo ${!${Hash_config_varname_prefix}${1}_*}"); do keyname=$(eval "echo ${i##${Hash_config_varname_prefix}${1}_}") eval "$2 $keyname "$$i"" done IFS="$oldIFS" } # NOTE: In lines 103 and 116, ampersand changed. # But, it doesn't matter, because these are comment lines anyhow. Here is an example script using the foregoing hash library. Example A-21. Colorizing text using hash functions Appendix A. Contributed Scripts 589
- 596. Advanced Bash-Scripting Guide #!/bin/bash # hash-example.sh: Colorizing text. # Author: Mariusz Gniazdowski <mariusz.gn-at-gmail.com> . Hash.lib # Load the library of functions. hash_set colors red "033[0;31m" hash_set colors blue "033[0;34m" hash_set colors light_blue "033[1;34m" hash_set colors light_red "033[1;31m" hash_set colors cyan "033[0;36m" hash_set colors light_green "033[1;32m" hash_set colors light_gray "033[0;37m" hash_set colors green "033[0;32m" hash_set colors yellow "033[1;33m" hash_set colors light_purple "033[1;35m" hash_set colors purple "033[0;35m" hash_set colors reset_color "033[0;00m" # $1 - keyname # $2 - value try_colors() { echo -en "$2" echo "This line is $1." } hash_foreach colors try_colors hash_echo colors reset_color -en echo -e 'nLet us overwrite some colors with yellow.n' # It's hard to read yellow text on some terminals. hash_dup colors yellow red light_green blue green light_gray cyan hash_foreach colors try_colors hash_echo colors reset_color -en echo -e 'nLet us delete them and try colors once more . . .n' for i in red light_green blue green light_gray cyan; do hash_unset colors $i done hash_foreach colors try_colors hash_echo colors reset_color -en hash_set other txt "Other examples . . ." hash_echo other txt hash_get_into other txt text echo $text hash_set other my_fun try_colors hash_call other my_fun purple "`hash_echo colors purple`" hash_echo colors reset_color -en echo; echo "Back to normal?"; echo exit $? # On some terminals, the "light" colors print in bold, # and end up looking darker than the normal ones. # Why is this? An example illustrating the mechanics of hashing, but from a different point of view. Appendix A. Contributed Scripts 590
- 597. Advanced Bash-Scripting Guide Example A-22. More on hash functions #!/bin/bash # $Id: ha.sh,v 1.2 2005/04/21 23:24:26 oliver Exp $ # Copyright 2005 Oliver Beckstein # Released under the GNU Public License # Author of script granted permission for inclusion in ABS Guide. # (Thank you!) #---------------------------------------------------------------- # pseudo hash based on indirect parameter expansion # API: access through functions: # # create the hash: # # newhash Lovers # # add entries (note single quotes for spaces) # # addhash Lovers Tristan Isolde # addhash Lovers 'Romeo Montague' 'Juliet Capulet' # # access value by key # # gethash Lovers Tristan ----> Isolde # # show all keys # # keyshash Lovers ----> 'Tristan' 'Romeo Montague' # # # Convention: instead of perls' foo{bar} = boing' syntax, # use # '_foo_bar=boing' (two underscores, no spaces) # # 1) store key in _NAME_keys[] # 2) store value in _NAME_values[] using the same integer index # The integer index for the last entry is _NAME_ptr # # NOTE: No error or sanity checks, just bare bones. function _inihash () { # private function # call at the beginning of each procedure # defines: _keys _values _ptr # # Usage: _inihash NAME local name=$1 _keys=_${name}_keys _values=_${name}_values _ptr=_${name}_ptr } function newhash () { # Usage: newhash NAME # NAME should not contain spaces or dots. # Actually: it must be a legal name for a Bash variable. # We rely on Bash automatically recognising arrays. local name=$1 local _keys _values _ptr _inihash ${name} Appendix A. Contributed Scripts 591
- 598. Advanced Bash-Scripting Guide eval ${_ptr}=0 } function addhash () { # Usage: addhash NAME KEY 'VALUE with spaces' # arguments with spaces need to be quoted with single quotes '' local name=$1 k="$2" v="$3" local _keys _values _ptr _inihash ${name} #echo "DEBUG(addhash): ${_ptr}=${!_ptr}" eval let ${_ptr}=${_ptr}+1 eval "$_keys[${!_ptr}]="${k}"" eval "$_values[${!_ptr}]="${v}"" } function gethash () { # Usage: gethash NAME KEY # Returns boing # ERR=0 if entry found, 1 otherwise # That's not a proper hash -- #+ we simply linearly search through the keys. local name=$1 key="$2" local _keys _values _ptr local k v i found h _inihash ${name} # _ptr holds the highest index in the hash found=0 for i in $(seq 1 ${!_ptr}); do h="${${_keys}[${i}]}" # Safer to do it in two steps, eval k=${h} #+ especially when quoting for spaces. if [ "${k}" = "${key}" ]; then found=1; break; fi done; [ ${found} = 0 ] && return 1; # else: i is the index that matches the key h="${${_values}[${i}]}" eval echo "${h}" return 0; } function keyshash () { # Usage: keyshash NAME # Returns list of all keys defined for hash name. local name=$1 key="$2" local _keys _values _ptr local k i h _inihash ${name} # _ptr holds the highest index in the hash for i in $(seq 1 ${!_ptr}); do h="${${_keys}[${i}]}" # Safer to do it in two steps, eval k=${h} #+ especially when quoting for spaces. echo -n "'${k}' " done; } Appendix A. Contributed Scripts 592
- 599. Advanced Bash-Scripting Guide # ----------------------------------------------------------------------- # Now, let's test it. # (Per comments at the beginning of the script.) newhash Lovers addhash Lovers Tristan Isolde addhash Lovers 'Romeo Montague' 'Juliet Capulet' # Output results. echo gethash Lovers Tristan # Isolde echo keyshash Lovers # 'Tristan' 'Romeo Montague' echo; echo exit 0 # Exercise: # -------- # Add error checks to the functions. Now for a script that installs and mounts those cute USB keychain solid-state "hard drives." Example A-23. Mounting USB keychain storage devices #!/bin/bash # ==> usb.sh # ==> Script for mounting and installing pen/keychain USB storage devices. # ==> Runs as root at system startup (see below). # ==> # ==> Newer Linux distros (2004 or later) autodetect # ==> and install USB pen drives, and therefore don't need this script. # ==> But, it's still instructive. # This code is free software covered by GNU GPL license version 2 or above. # Please refer to http://www.gnu.org/ for the full license text. # # Some code lifted from usb-mount by Michael Hamilton's usb-mount (LGPL) #+ see http://users.actrix.co.nz/michael/usbmount.html # # INSTALL # ------- # Put this in /etc/hotplug/usb/diskonkey. # Then look in /etc/hotplug/usb.distmap, and copy all usb-storage entries #+ into /etc/hotplug/usb.usermap, substituting "usb-storage" for "diskonkey". # Otherwise this code is only run during the kernel module invocation/removal #+ (at least in my tests), which defeats the purpose. # # TODO # ---- # Handle more than one diskonkey device at one time (e.g. /dev/diskonkey1 #+ and /mnt/diskonkey1), etc. The biggest problem here is the handling in #+ devlabel, which I haven't yet tried. # # AUTHOR and SUPPORT # ------------------ # Konstantin Riabitsev, <icon linux duke edu>. # Send any problem reports to my email address at the moment. # Appendix A. Contributed Scripts 593
- 600. Advanced Bash-Scripting Guide # ==> Comments added by ABS Guide author. SYMLINKDEV=/dev/diskonkey MOUNTPOINT=/mnt/diskonkey DEVLABEL=/sbin/devlabel DEVLABELCONFIG=/etc/sysconfig/devlabel IAM=$0 ## # Functions lifted near-verbatim from usb-mount code. # function allAttachedScsiUsb { find /proc/scsi/ -path '/proc/scsi/usb-storage*' -type f | xargs grep -l 'Attached: Yes' } function scsiDevFromScsiUsb { echo $1 | awk -F"[-/]" '{ n=$(NF-1); print "/dev/sd" substr("abcdefghijklmnopqrstuvwxyz", n+1, 1) }' } if [ "${ACTION}" = "add" ] && [ -f "${DEVICE}" ]; then ## # lifted from usbcam code. # if [ -f /var/run/console.lock ]; then CONSOLEOWNER=`cat /var/run/console.lock` elif [ -f /var/lock/console.lock ]; then CONSOLEOWNER=`cat /var/lock/console.lock` else CONSOLEOWNER= fi for procEntry in $(allAttachedScsiUsb); do scsiDev=$(scsiDevFromScsiUsb $procEntry) # Some bug with usb-storage? # Partitions are not in /proc/partitions until they are accessed #+ somehow. /sbin/fdisk -l $scsiDev >/dev/null ## # Most devices have partitioning info, so the data would be on #+ /dev/sd?1. However, some stupider ones don't have any partitioning #+ and use the entire device for data storage. This tries to #+ guess semi-intelligently if we have a /dev/sd?1 and if not, then #+ it uses the entire device and hopes for the better. # if grep -q `basename $scsiDev`1 /proc/partitions; then part="$scsiDev""1" else part=$scsiDev fi ## # Change ownership of the partition to the console user so they can #+ mount it. # if [ ! -z "$CONSOLEOWNER" ]; then chown $CONSOLEOWNER:disk $part fi ## # This checks if we already have this UUID defined with devlabel. # If not, it then adds the device to the list. # Appendix A. Contributed Scripts 594
- 601. Advanced Bash-Scripting Guide prodid=`$DEVLABEL printid -d $part` if ! grep -q $prodid $DEVLABELCONFIG; then # cross our fingers and hope it works $DEVLABEL add -d $part -s $SYMLINKDEV 2>/dev/null fi ## # Check if the mount point exists and create if it doesn't. # if [ ! -e $MOUNTPOINT ]; then mkdir -p $MOUNTPOINT fi ## # Take care of /etc/fstab so mounting is easy. # if ! grep -q "^$SYMLINKDEV" /etc/fstab; then # Add an fstab entry echo -e "$SYMLINKDEVtt$MOUNTPOINTttautotnoauto,owner,kudzu 0 0" >> /etc/fstab fi done if [ ! -z "$REMOVER" ]; then ## # Make sure this script is triggered on device removal. # mkdir -p `dirname $REMOVER` ln -s $IAM $REMOVER fi elif [ "${ACTION}" = "remove" ]; then ## # If the device is mounted, unmount it cleanly. # if grep -q "$MOUNTPOINT" /etc/mtab; then # unmount cleanly umount -l $MOUNTPOINT fi ## # Remove it from /etc/fstab if it's there. # if grep -q "^$SYMLINKDEV" /etc/fstab; then grep -v "^$SYMLINKDEV" /etc/fstab > /etc/.fstab.new mv -f /etc/.fstab.new /etc/fstab fi fi exit 0 Converting a text file to HTML format. Example A-24. Converting to HTML #!/bin/bash # tohtml.sh [v. 0.2, reldate: 06/26/08, still buggy] # Convert a text file to HTML format. # Author: Mendel Cooper # License: GPL3 # Usage: sh tohtml.sh < textfile > htmlfile # Script can easily be modified to accept source and target filenames. # Assumptions: Appendix A. Contributed Scripts 595
- 602. Advanced Bash-Scripting Guide # 1) Paragraphs in (target) text file are separated by a blank line. # 2) Jpeg images (*.jpg) are located in "images" subdirectory. # In the target file, the image names are enclosed in square brackets, # for example, [image01.jpg]. # 3) Emphasized (italic) phrases begin with a space+underscore #+ or the first character on the line is an underscore, #+ and end with an underscore+space or underscore+end-of-line. # Settings FNTSIZE=2 # Small-medium font size IMGDIR="images" # Image directory # Headers HDR01='<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">' HDR02='<!-- Converted to HTML by ***tohtml.sh*** script -->' HDR03='<!-- script author: M. Leo Cooper <thegrendel.abs@gmail.com> -->' HDR10='<html>' HDR11='<head>' HDR11a='</head>' HDR12a='<title>' HDR12b='</title>' HDR121='<META NAME="GENERATOR" CONTENT="tohtml.sh script">' HDR13='<body bgcolor="#dddddd">' # Change background color to suit. HDR14a='<font size=' HDR14b='>' # Footers FTR10='</body>' FTR11='</html>' # Tags BOLD="<b>" CENTER="<center>" END_CENTER="</center>" LF="<br>" write_headers () { echo "$HDR01" echo echo "$HDR02" echo "$HDR03" echo echo echo "$HDR10" echo "$HDR11" echo "$HDR121" echo "$HDR11a" echo "$HDR13" echo echo -n "$HDR14a" echo -n "$FNTSIZE" echo "$HDR14b" echo echo "$BOLD" # Everything in bold (more easily readable). } process_text () { while read line # Read one line at a time. do { Appendix A. Contributed Scripts 596
- 603. Advanced Bash-Scripting Guide if [ ! "$line" ] # Blank line? then # Then new paragraph must follow. echo echo "$LF" # Insert two <br> tags. echo "$LF" echo continue # Skip the underscore test. else # Otherwise . . . if [[ "$line" =~ "[*jpg]" ]] # Is a graphic? then # Strip away brackets. temp=$( echo "$line" | sed -e 's/[//' -e 's/]//' ) line=""$CENTER" <img src=""$IMGDIR"/$temp"> "$END_CENTER" " # Add image tag. # And, center it. fi fi echo "$line" | grep -q _ if [ "$?" -eq 0 ] # If line contains underscore ... then # =================================================== # Convert underscored phrase to italics. temp=$( echo "$line" | sed -e 's/ _/ <i>/' -e 's/_/</i> /' | sed -e 's/^_/<i>/' -e 's/_/</i>/' ) # Process only underscores prefixed by space, #+ or at beginning or end of line. # Do not convert underscores embedded within a word! line="$temp" # Slows script execution. Can be optimized? # =================================================== fi echo echo "$line" echo } # End while done } # End process_text () write_footers () # Termination tags. { echo "$FTR10" echo "$FTR11" } # main () { # ========= write_headers process_text write_footers # ========= # } exit $? Appendix A. Contributed Scripts 597
- 604. Advanced Bash-Scripting Guide # Exercises: # --------- # 1) Fixup: Check for closing underscore before a comma or period. # 2) Add a test for the presence of a closing underscore #+ in phrases to be italicized. Here is something to warm the hearts of webmasters and mistresses: a script that saves weblogs. Example A-25. Preserving weblogs #!/bin/bash # archiveweblogs.sh v1.0 # Troy Engel <tengel@fluid.com> # Slightly modified by document author. # Used with permission. # # This script will preserve the normally rotated and #+ thrown away weblogs from a default RedHat/Apache installation. # It will save the files with a date/time stamp in the filename, #+ bzipped, to a given directory. # # Run this from crontab nightly at an off hour, #+ as bzip2 can suck up some serious CPU on huge logs: # 0 2 * * * /opt/sbin/archiveweblogs.sh PROBLEM=66 # Set this to your backup dir. BKP_DIR=/opt/backups/weblogs # Default Apache/RedHat stuff LOG_DAYS="4 3 2 1" LOG_DIR=/var/log/httpd LOG_FILES="access_log error_log" # Default RedHat program locations LS=/bin/ls MV=/bin/mv ID=/usr/bin/id CUT=/bin/cut COL=/usr/bin/column BZ2=/usr/bin/bzip2 # Are we root? USER=`$ID -u` if [ "X$USER" != "X0" ]; then echo "PANIC: Only root can run this script!" exit $PROBLEM fi # Backup dir exists/writable? if [ ! -x $BKP_DIR ]; then echo "PANIC: $BKP_DIR doesn't exist or isn't writable!" exit $PROBLEM fi # Move, rename and bzip2 the logs for logday in $LOG_DAYS; do Appendix A. Contributed Scripts 598
- 605. Advanced Bash-Scripting Guide for logfile in $LOG_FILES; do MYFILE="$LOG_DIR/$logfile.$logday" if [ -w $MYFILE ]; then DTS=`$LS -lgo --time-style=+%Y%m%d $MYFILE | $COL -t | $CUT -d ' ' -f7` $MV $MYFILE $BKP_DIR/$logfile.$DTS $BZ2 $BKP_DIR/$logfile.$DTS else # Only spew an error if the file exits (ergo non-writable). if [ -f $MYFILE ]; then echo "ERROR: $MYFILE not writable. Skipping." fi fi done done exit 0 How to keep the shell from expanding and reinterpreting text strings. Example A-26. Protecting literal strings #! /bin/bash # protect_literal.sh # set -vx :<<-'_Protect_Literal_String_Doc' Copyright (c) Michael S. Zick, 2003; All Rights Reserved License: Unrestricted reuse in any form, for any purpose. Warranty: None Revision: $ID$ Documentation redirected to the Bash no-operation. Bash will '/dev/null' this block when the script is first read. (Uncomment the above set command to see this action.) Remove the first (Sha-Bang) line when sourcing this as a library procedure. Also comment out the example use code in the two places where shown. Usage: _protect_literal_str 'Whatever string meets your ${fancy}' Just echos the argument to standard out, hard quotes restored. $(_protect_literal_str 'Whatever string meets your ${fancy}') as the right-hand-side of an assignment statement. Does: As the right-hand-side of an assignment, preserves the hard quotes protecting the contents of the literal during assignment. Notes: The strange names (_*) are used to avoid trampling on the user's chosen names when this is sourced as a library. _Protect_Literal_String_Doc Appendix A. Contributed Scripts 599
- 606. Advanced Bash-Scripting Guide # The 'for illustration' function form _protect_literal_str() { # Pick an un-used, non-printing character as local IFS. # Not required, but shows that we are ignoring it. local IFS=$'x1B' # ESC character # Enclose the All-Elements-Of in hard quotes during assignment. local tmp=$'x27'$@$'x27' # local tmp=$'''$@$''' # Even uglier. local len=${#tmp} # Info only. echo $tmp is $len long. # Output AND information. } # This is the short-named version. _pls() { local IFS=$'x1B' # ESC character (not required) echo $'x27'$@$'x27' # Hard quoted parameter glob } # :<<-'_Protect_Literal_String_Test' # # # Remove the above "# " to disable this code. # # # # See how that looks when printed. echo echo "- - Test One - -" _protect_literal_str 'Hello $user' _protect_literal_str 'Hello "${username}"' echo # Which yields: # - - Test One - - # 'Hello $user' is 13 long. # 'Hello "${username}"' is 21 long. # Looks as expected, but why all of the trouble? # The difference is hidden inside the Bash internal order #+ of operations. # Which shows when you use it on the RHS of an assignment. # Declare an array for test values. declare -a arrayZ # Assign elements with various types of quotes and escapes. arrayZ=( zero "$(_pls 'Hello ${Me}')" 'Hello ${You}' "'Pass: ${pw}'" ) # Now list that array and see what is there. echo "- - Test Two - -" for (( i=0 ; i<${#arrayZ[*]} ; i++ )) do echo Element $i: ${arrayZ[$i]} is: ${#arrayZ[$i]} long. done echo # Which yields: # - - Test Two - - # Element 0: zero is: 4 long. # Our marker element # Element 1: 'Hello ${Me}' is: 13 long. # Our "$(_pls '...' )" # Element 2: Hello ${You} is: 12 long. # Quotes are missing Appendix A. Contributed Scripts 600
- 607. Advanced Bash-Scripting Guide # Element 3: 'Pass: ' is: 10 long. # ${pw} expanded to nothing # Now make an assignment with that result. declare -a array2=( ${arrayZ[@]} ) # And print what happened. echo "- - Test Three - -" for (( i=0 ; i<${#array2[*]} ; i++ )) do echo Element $i: ${array2[$i]} is: ${#array2[$i]} long. done echo # Which yields: # - - Test Three - - # Element 0: zero is: 4 long. # Our marker element. # Element 1: Hello ${Me} is: 11 long. # Intended result. # Element 2: Hello is: 5 long. # ${You} expanded to nothing. # Element 3: 'Pass: is: 6 long. # Split on the whitespace. # Element 4: ' is: 1 long. # The end quote is here now. # Our Element 1 has had its leading and trailing hard quotes stripped. # Although not shown, leading and trailing whitespace is also stripped. # Now that the string contents are set, Bash will always, internally, #+ hard quote the contents as required during its operations. # Why? # Considering our "$(_pls 'Hello ${Me}')" construction: # " ... " -> Expansion required, strip the quotes. # $( ... ) -> Replace with the result of..., strip this. # _pls ' ... ' -> called with literal arguments, strip the quotes. # The result returned includes hard quotes; BUT the above processing #+ has already been done, so they become part of the value assigned. # # Similarly, during further usage of the string variable, the ${Me} #+ is part of the contents (result) and survives any operations # (Until explicitly told to evaluate the string). # Hint: See what happens when the hard quotes ($'x27') are replaced #+ with soft quotes ($'x22') in the above procedures. # Interesting also is to remove the addition of any quoting. # _Protect_Literal_String_Test # # # Remove the above "# " to disable this code. # # # exit 0 But, what if you want the shell to expand and reinterpret strings? Example A-27. Unprotecting literal strings #! /bin/bash # unprotect_literal.sh # set -vx :<<-'_UnProtect_Literal_String_Doc' Copyright (c) Michael S. Zick, 2003; All Rights Reserved License: Unrestricted reuse in any form, for any purpose. Warranty: None Appendix A. Contributed Scripts 601
- 608. Advanced Bash-Scripting Guide Revision: $ID$ Documentation redirected to the Bash no-operation. Bash will '/dev/null' this block when the script is first read. (Uncomment the above set command to see this action.) Remove the first (Sha-Bang) line when sourcing this as a library procedure. Also comment out the example use code in the two places where shown. Usage: Complement of the "$(_pls 'Literal String')" function. (See the protect_literal.sh example.) StringVar=$(_upls ProtectedSringVariable) Does: When used on the right-hand-side of an assignment statement; makes the substitions embedded in the protected string. Notes: The strange names (_*) are used to avoid trampling on the user's chosen names when this is sourced as a library. _UnProtect_Literal_String_Doc _upls() { local IFS=$'x1B' # ESC character (not required) eval echo $@ # Substitution on the glob. } # :<<-'_UnProtect_Literal_String_Test' # # # Remove the above "# " to disable this code. # # # _pls() { local IFS=$'x1B' # ESC character (not required) echo $'x27'$@$'x27' # Hard quoted parameter glob } # Declare an array for test values. declare -a arrayZ # Assign elements with various types of quotes and escapes. arrayZ=( zero "$(_pls 'Hello ${Me}')" 'Hello ${You}' "'Pass: ${pw}'" ) # Now make an assignment with that result. declare -a array2=( ${arrayZ[@]} ) # Which yielded: # - - Test Three - - # Element 0: zero is: 4 long # Our marker element. # Element 1: Hello ${Me} is: 11 long # Intended result. # Element 2: Hello is: 5 long # ${You} expanded to nothing. # Element 3: 'Pass: is: 6 long # Split on the whitespace. # Element 4: ' is: 1 long # The end quote is here now. # set -vx Appendix A. Contributed Scripts 602
- 609. Advanced Bash-Scripting Guide # Initialize 'Me' to something for the embedded ${Me} substitution. # This needs to be done ONLY just prior to evaluating the #+ protected string. # (This is why it was protected to begin with.) Me="to the array guy." # Set a string variable destination to the result. newVar=$(_upls ${array2[1]}) # Show what the contents are. echo $newVar # Do we really need a function to do this? newerVar=$(eval echo ${array2[1]}) echo $newerVar # I guess not, but the _upls function gives us a place to hang #+ the documentation on. # This helps when we forget what a # construction like: #+ $(eval echo ... ) means. # What if Me isn't set when the protected string is evaluated? unset Me newestVar=$(_upls ${array2[1]}) echo $newestVar # Just gone, no hints, no runs, no errors. # Why in the world? # Setting the contents of a string variable containing character #+ sequences that have a meaning in Bash is a general problem in #+ script programming. # # This problem is now solved in eight lines of code #+ (and four pages of description). # Where is all this going? # Dynamic content Web pages as an array of Bash strings. # Content set per request by a Bash 'eval' command #+ on the stored page template. # Not intended to replace PHP, just an interesting thing to do. ### # Don't have a webserver application? # No problem, check the example directory of the Bash source; #+ there is a Bash script for that also. # _UnProtect_Literal_String_Test # # # Remove the above "# " to disable this code. # # # exit 0 This interesting script helps hunt down spammers. Example A-28. Spammer Identification #!/bin/bash # $Id: is_spammer.bash,v 1.12.2.11 2004/10/01 21:42:33 mszick Exp $ Appendix A. Contributed Scripts 603
- 610. Advanced Bash-Scripting Guide # Above line is RCS info. # The latest version of this script is available from http://www.morethan.org. # # Spammer-identification # by Michael S. Zick # Used in the ABS Guide with permission. ####################################################### # Documentation # See also "Quickstart" at end of script. ####################################################### :<<-'__is_spammer_Doc_' Copyright (c) Michael S. Zick, 2004 License: Unrestricted reuse in any form, for any purpose. Warranty: None -{Its a script; the user is on their own.}- Impatient? Application code: goto "# # # Hunt the Spammer' program code # # #" Example output: ":<<-'_is_spammer_outputs_'" How to use: Enter script name without arguments. Or goto "Quickstart" at end of script. Provides Given a domain name or IP(v4) address as input: Does an exhaustive set of queries to find the associated network resources (short of recursing into TLDs). Checks the IP(v4) addresses found against Blacklist nameservers. If found to be a blacklisted IP(v4) address, reports the blacklist text records. (Usually hyper-links to the specific report.) Requires A working Internet connection. (Exercise: Add check and/or abort if not on-line when running script.) Bash with arrays (2.05b+). The external program 'dig' -- a utility program provided with the 'bind' set of programs. Specifically, the version which is part of Bind series 9.x See: http://www.isc.org All usages of 'dig' are limited to wrapper functions, which may be rewritten as required. See: dig_wrappers.bash for details. ("Additional documentation" -- below) Usage Script requires a single argument, which may be: 1) A domain name; 2) An IP(v4) address; 3) A filename, with one name or address per line. Script accepts an optional second argument, which may be: Appendix A. Contributed Scripts 604
- 611. Advanced Bash-Scripting Guide 1) A Blacklist server name; 2) A filename, with one Blacklist server name per line. If the second argument is not provided, the script uses a built-in set of (free) Blacklist servers. See also, the Quickstart at the end of this script (after 'exit'). Return Codes 0 - All OK 1 - Script failure 2 - Something is Blacklisted Optional environment variables SPAMMER_TRACE If set to a writable file, script will log an execution flow trace. SPAMMER_DATA If set to a writable file, script will dump its discovered data in the form of GraphViz file. See: http://www.research.att.com/sw/tools/graphviz SPAMMER_LIMIT Limits the depth of resource tracing. Default is 2 levels. A setting of 0 (zero) means 'unlimited' . . . Caution: script might recurse the whole Internet! A limit of 1 or 2 is most useful when processing a file of domain names and addresses. A higher limit can be useful when hunting spam gangs. Additional documentation Download the archived set of scripts explaining and illustrating the function contained within this script. http://bash.neuralshortcircuit.com/mszick_clf.tar.bz2 Study notes This script uses a large number of functions. Nearly all general functions have their own example script. Each of the example scripts have tutorial level comments. Scripting project Add support for IP(v6) addresses. IP(v6) addresses are recognized but not processed. Advanced project Add the reverse lookup detail to the discovered information. Report the delegation chain and abuse contacts. Modify the GraphViz file output to include the newly discovered information. __is_spammer_Doc_ ####################################################### Appendix A. Contributed Scripts 605
- 612. Advanced Bash-Scripting Guide #### Special IFS settings used for string parsing. #### # Whitespace == :Space:Tab:Line Feed:Carriage Return: WSP_IFS=$'x20'$'x09'$'x0A'$'x0D' # No Whitespace == Line Feed:Carriage Return NO_WSP=$'x0A'$'x0D' # Field separator for dotted decimal IP addresses ADR_IFS=${NO_WSP}'.' # Array to dotted string conversions DOT_IFS='.'${WSP_IFS} # # # Pending operations stack machine # # # # This set of functions described in func_stack.bash. # (See "Additional documentation" above.) # # # # Global stack of pending operations. declare -f -a _pending_ # Global sentinel for stack runners declare -i _p_ctrl_ # Global holder for currently executing function declare -f _pend_current_ # # # Debug version only - remove for regular use # # # # # The function stored in _pend_hook_ is called # immediately before each pending function is # evaluated. Stack clean, _pend_current_ set. # # This thingy demonstrated in pend_hook.bash. declare -f _pend_hook_ # # # # The do nothing function pend_dummy() { : ; } # Clear and initialize the function stack. pend_init() { unset _pending_[@] pend_func pend_stop_mark _pend_hook_='pend_dummy' # Debug only. } # Discard the top function on the stack. pend_pop() { if [ ${#_pending_[@]} -gt 0 ] then local -i _top_ _top_=${#_pending_[@]}-1 unset _pending_[$_top_] fi } # pend_func function_name [$(printf '%qn' arguments)] pend_func() { Appendix A. Contributed Scripts 606
- 613. Advanced Bash-Scripting Guide local IFS=${NO_WSP} set -f _pending_[${#_pending_[@]}]=$@ set +f } # The function which stops the release: pend_stop_mark() { _p_ctrl_=0 } pend_mark() { pend_func pend_stop_mark } # Execute functions until 'pend_stop_mark' . . . pend_release() { local -i _top_ # Declare _top_ as integer. _p_ctrl_=${#_pending_[@]} while [ ${_p_ctrl_} -gt 0 ] do _top_=${#_pending_[@]}-1 _pend_current_=${_pending_[$_top_]} unset _pending_[$_top_] $_pend_hook_ # Debug only. eval $_pend_current_ done } # Drop functions until 'pend_stop_mark' . . . pend_drop() { local -i _top_ local _pd_ctrl_=${#_pending_[@]} while [ ${_pd_ctrl_} -gt 0 ] do _top_=$_pd_ctrl_-1 if [ "${_pending_[$_top_]}" == 'pend_stop_mark' ] then unset _pending_[$_top_] break else unset _pending_[$_top_] _pd_ctrl_=$_top_ fi done if [ ${#_pending_[@]} -eq 0 ] then pend_func pend_stop_mark fi } #### Array editors #### # This function described in edit_exact.bash. # (See "Additional documentation," above.) # edit_exact <excludes_array_name> <target_array_name> edit_exact() { [ $# -eq 2 ] || [ $# -eq 3 ] || return 1 local -a _ee_Excludes local -a _ee_Target local _ee_x Appendix A. Contributed Scripts 607
- 614. Advanced Bash-Scripting Guide local _ee_t local IFS=${NO_WSP} set -f eval _ee_Excludes=( ${$1[@]} ) eval _ee_Target=( ${$2[@]} ) local _ee_len=${#_ee_Target[@]} # Original length. local _ee_cnt=${#_ee_Excludes[@]} # Exclude list length. [ ${_ee_len} -ne 0 ] || return 0 # Can't edit zero length. [ ${_ee_cnt} -ne 0 ] || return 0 # Can't edit zero length. for (( x = 0; x < ${_ee_cnt} ; x++ )) do _ee_x=${_ee_Excludes[$x]} for (( n = 0 ; n < ${_ee_len} ; n++ )) do _ee_t=${_ee_Target[$n]} if [ x"${_ee_t}" == x"${_ee_x}" ] then unset _ee_Target[$n] # Discard match. [ $# -eq 2 ] && break # If 2 arguments, then done. fi done done eval $2=( ${_ee_Target[@]} ) set +f return 0 } # This function described in edit_by_glob.bash. # edit_by_glob <excludes_array_name> <target_array_name> edit_by_glob() { [ $# -eq 2 ] || [ $# -eq 3 ] || return 1 local -a _ebg_Excludes local -a _ebg_Target local _ebg_x local _ebg_t local IFS=${NO_WSP} set -f eval _ebg_Excludes=( ${$1[@]} ) eval _ebg_Target=( ${$2[@]} ) local _ebg_len=${#_ebg_Target[@]} local _ebg_cnt=${#_ebg_Excludes[@]} [ ${_ebg_len} -ne 0 ] || return 0 [ ${_ebg_cnt} -ne 0 ] || return 0 for (( x = 0; x < ${_ebg_cnt} ; x++ )) do _ebg_x=${_ebg_Excludes[$x]} for (( n = 0 ; n < ${_ebg_len} ; n++ )) do [ $# -eq 3 ] && _ebg_x=${_ebg_x}'*' # Do prefix edit if [ ${_ebg_Target[$n]:=} ] #+ if defined & set. then _ebg_t=${_ebg_Target[$n]/#${_ebg_x}/} [ ${#_ebg_t} -eq 0 ] && unset _ebg_Target[$n] fi done done eval $2=( ${_ebg_Target[@]} ) set +f return 0 } Appendix A. Contributed Scripts 608
- 615. Advanced Bash-Scripting Guide # This function described in unique_lines.bash. # unique_lines <in_name> <out_name> unique_lines() { [ $# -eq 2 ] || return 1 local -a _ul_in local -a _ul_out local -i _ul_cnt local -i _ul_pos local _ul_tmp local IFS=${NO_WSP} set -f eval _ul_in=( ${$1[@]} ) _ul_cnt=${#_ul_in[@]} for (( _ul_pos = 0 ; _ul_pos < ${_ul_cnt} ; _ul_pos++ )) do if [ ${_ul_in[${_ul_pos}]:=} ] # If defined & not empty then _ul_tmp=${_ul_in[${_ul_pos}]} _ul_out[${#_ul_out[@]}]=${_ul_tmp} for (( zap = _ul_pos ; zap < ${_ul_cnt} ; zap++ )) do [ ${_ul_in[${zap}]:=} ] && [ 'x'${_ul_in[${zap}]} == 'x'${_ul_tmp} ] && unset _ul_in[${zap}] done fi done eval $2=( ${_ul_out[@]} ) set +f return 0 } # This function described in char_convert.bash. # to_lower <string> to_lower() { [ $# -eq 1 ] || return 1 local _tl_out _tl_out=${1//A/a} _tl_out=${_tl_out//B/b} _tl_out=${_tl_out//C/c} _tl_out=${_tl_out//D/d} _tl_out=${_tl_out//E/e} _tl_out=${_tl_out//F/f} _tl_out=${_tl_out//G/g} _tl_out=${_tl_out//H/h} _tl_out=${_tl_out//I/i} _tl_out=${_tl_out//J/j} _tl_out=${_tl_out//K/k} _tl_out=${_tl_out//L/l} _tl_out=${_tl_out//M/m} _tl_out=${_tl_out//N/n} _tl_out=${_tl_out//O/o} _tl_out=${_tl_out//P/p} _tl_out=${_tl_out//Q/q} _tl_out=${_tl_out//R/r} _tl_out=${_tl_out//S/s} _tl_out=${_tl_out//T/t} _tl_out=${_tl_out//U/u} _tl_out=${_tl_out//V/v} _tl_out=${_tl_out//W/w} _tl_out=${_tl_out//X/x} _tl_out=${_tl_out//Y/y} Appendix A. Contributed Scripts 609
- 616. Advanced Bash-Scripting Guide _tl_out=${_tl_out//Z/z} echo ${_tl_out} return 0 } #### Application helper functions #### # Not everybody uses dots as separators (APNIC, for example). # This function described in to_dot.bash # to_dot <string> to_dot() { [ $# -eq 1 ] || return 1 echo ${1//[#|@|%]/.} return 0 } # This function described in is_number.bash. # is_number <input> is_number() { [ "$#" -eq 1 ] || return 1 # is blank? [ x"$1" == 'x0' ] && return 0 # is zero? local -i tst let tst=$1 2>/dev/null # else is numeric! return $? } # This function described in is_address.bash. # is_address <input> is_address() { [ $# -eq 1 ] || return 1 # Blank ==> false local -a _ia_input local IFS=${ADR_IFS} _ia_input=( $1 ) if [ ${#_ia_input[@]} -eq 4 ] && is_number ${_ia_input[0]} && is_number ${_ia_input[1]} && is_number ${_ia_input[2]} && is_number ${_ia_input[3]} && [ ${_ia_input[0]} -lt 256 ] && [ ${_ia_input[1]} -lt 256 ] && [ ${_ia_input[2]} -lt 256 ] && [ ${_ia_input[3]} -lt 256 ] then return 0 else return 1 fi } # This function described in split_ip.bash. # split_ip <IP_address> #+ <array_name_norm> [<array_name_rev>] split_ip() { [ $# -eq 3 ] || # Either three [ $# -eq 2 ] || return 1 #+ or two arguments local -a _si_input local IFS=${ADR_IFS} _si_input=( $1 ) IFS=${WSP_IFS} eval $2=( ${_si_input[@]} ) if [ $# -eq 3 ] then Appendix A. Contributed Scripts 610
- 617. Advanced Bash-Scripting Guide # Build query order array. local -a _dns_ip _dns_ip[0]=${_si_input[3]} _dns_ip[1]=${_si_input[2]} _dns_ip[2]=${_si_input[1]} _dns_ip[3]=${_si_input[0]} eval $3=( ${_dns_ip[@]} ) fi return 0 } # This function described in dot_array.bash. # dot_array <array_name> dot_array() { [ $# -eq 1 ] || return 1 # Single argument required. local -a _da_input eval _da_input=( ${$1[@]} ) local IFS=${DOT_IFS} local _da_output=${_da_input[@]} IFS=${WSP_IFS} echo ${_da_output} return 0 } # This function described in file_to_array.bash # file_to_array <file_name> <line_array_name> file_to_array() { [ $# -eq 2 ] || return 1 # Two arguments required. local IFS=${NO_WSP} local -a _fta_tmp_ _fta_tmp_=( $(cat $1) ) eval $2=( ${_fta_tmp_[@]} ) return 0 } # Columnized print of an array of multi-field strings. # col_print <array_name> <min_space> < #+ tab_stop [tab_stops]> col_print() { [ $# -gt 2 ] || return 0 local -a _cp_inp local -a _cp_spc local -a _cp_line local _cp_min local _cp_mcnt local _cp_pos local _cp_cnt local _cp_tab local -i _cp local -i _cpf local _cp_fld # WARNING: FOLLOWING LINE NOT BLANK -- IT IS QUOTED SPACES. local _cp_max=' ' set -f local IFS=${NO_WSP} eval _cp_inp=( ${$1[@]} ) [ ${#_cp_inp[@]} -gt 0 ] || return 0 # Empty is easy. _cp_mcnt=$2 _cp_min=${_cp_max:1:${_cp_mcnt}} shift shift _cp_cnt=$# Appendix A. Contributed Scripts 611
- 618. Advanced Bash-Scripting Guide for (( _cp = 0 ; _cp < _cp_cnt ; _cp++ )) do _cp_spc[${#_cp_spc[@]}]="${_cp_max:2:$1}" #" shift done _cp_cnt=${#_cp_inp[@]} for (( _cp = 0 ; _cp < _cp_cnt ; _cp++ )) do _cp_pos=1 IFS=${NO_WSP}$'x20' _cp_line=( ${_cp_inp[${_cp}]} ) IFS=${NO_WSP} for (( _cpf = 0 ; _cpf < ${#_cp_line[@]} ; _cpf++ )) do _cp_tab=${_cp_spc[${_cpf}]:${_cp_pos}} if [ ${#_cp_tab} -lt ${_cp_mcnt} ] then _cp_tab="${_cp_min}" fi echo -n "${_cp_tab}" (( _cp_pos = ${_cp_pos} + ${#_cp_tab} )) _cp_fld="${_cp_line[${_cpf}]}" echo -n ${_cp_fld} (( _cp_pos = ${_cp_pos} + ${#_cp_fld} )) done echo done set +f return 0 } # # # # 'Hunt the Spammer' data flow # # # # # Application return code declare -i _hs_RC # Original input, from which IP addresses are removed # After which, domain names to check declare -a uc_name # Original input IP addresses are moved here # After which, IP addresses to check declare -a uc_address # Names against which address expansion run # Ready for name detail lookup declare -a chk_name # Addresses against which name expansion run # Ready for address detail lookup declare -a chk_address # Recursion is depth-first-by-name. # The expand_input_address maintains this list #+ to prohibit looking up addresses twice during #+ domain name recursion. declare -a been_there_addr been_there_addr=( '127.0.0.1' ) # Whitelist localhost # Names which we have checked (or given up on) declare -a known_name Appendix A. Contributed Scripts 612
- 619. Advanced Bash-Scripting Guide # Addresses which we have checked (or given up on) declare -a known_address # List of zero or more Blacklist servers to check. # Each 'known_address' will be checked against each server, #+ with negative replies and failures suppressed. declare -a list_server # Indirection limit - set to zero == no limit indirect=${SPAMMER_LIMIT:=2} # # # # 'Hunt the Spammer' information output data # # # # # Any domain name may have multiple IP addresses. # Any IP address may have multiple domain names. # Therefore, track unique address-name pairs. declare -a known_pair declare -a reverse_pair # In addition to the data flow variables; known_address #+ known_name and list_server, the following are output to the #+ external graphics interface file. # Authority chain, parent -> SOA fields. declare -a auth_chain # Reference chain, parent name -> child name declare -a ref_chain # DNS chain - domain name -> address declare -a name_address # Name and service pairs - domain name -> service declare -a name_srvc # Name and resource pairs - domain name -> Resource Record declare -a name_resource # Parent and Child pairs - parent name -> child name # This MAY NOT be the same as the ref_chain followed! declare -a parent_child # Address and Blacklist hit pairs - address->server declare -a address_hits # Dump interface file data declare -f _dot_dump _dot_dump=pend_dummy # Initially a no-op # Data dump is enabled by setting the environment variable SPAMMER_DATA #+ to the name of a writable file. declare _dot_file # Helper function for the dump-to-dot-file function # dump_to_dot <array_name> <prefix> dump_to_dot() { local -a _dda_tmp local -i _dda_cnt local _dda_form=' '${2}'%04u %sn' local IFS=${NO_WSP} eval _dda_tmp=( ${$1[@]} ) _dda_cnt=${#_dda_tmp[@]} Appendix A. Contributed Scripts 613
- 620. Advanced Bash-Scripting Guide if [ ${_dda_cnt} -gt 0 ] then for (( _dda = 0 ; _dda < _dda_cnt ; _dda++ )) do printf "${_dda_form}" "${_dda}" "${_dda_tmp[${_dda}]}" >>${_dot_file} done fi } # Which will also set _dot_dump to this function . . . dump_dot() { local -i _dd_cnt echo '# Data vintage: '$(date -R) >${_dot_file} echo '# ABS Guide: is_spammer.bash; v2, 2004-msz' >>${_dot_file} echo >>${_dot_file} echo 'digraph G {' >>${_dot_file} if [ ${#known_name[@]} -gt 0 ] then echo >>${_dot_file} echo '# Known domain name nodes' >>${_dot_file} _dd_cnt=${#known_name[@]} for (( _dd = 0 ; _dd < _dd_cnt ; _dd++ )) do printf ' N%04u [label="%s"] ;n' "${_dd}" "${known_name[${_dd}]}" >>${_dot_file} done fi if [ ${#known_address[@]} -gt 0 ] then echo >>${_dot_file} echo '# Known address nodes' >>${_dot_file} _dd_cnt=${#known_address[@]} for (( _dd = 0 ; _dd < _dd_cnt ; _dd++ )) do printf ' A%04u [label="%s"] ;n' "${_dd}" "${known_address[${_dd}]}" >>${_dot_file} done fi echo >>${_dot_file} echo '/*' >>${_dot_file} echo ' * Known relationships :: User conversion to' >>${_dot_file} echo ' * graphic form by hand or program required.' >>${_dot_file} echo ' *' >>${_dot_file} if [ ${#auth_chain[@]} -gt 0 ] then echo >>${_dot_file} echo '# Authority ref. edges followed & field source.' >>${_dot_file} dump_to_dot auth_chain AC fi if [ ${#ref_chain[@]} -gt 0 ] then echo >>${_dot_file} echo '# Name ref. edges followed and field source.' >>${_dot_file} dump_to_dot ref_chain RC fi Appendix A. Contributed Scripts 614
- 621. Advanced Bash-Scripting Guide if [ ${#name_address[@]} -gt 0 ] then echo >>${_dot_file} echo '# Known name->address edges' >>${_dot_file} dump_to_dot name_address NA fi if [ ${#name_srvc[@]} -gt 0 ] then echo >>${_dot_file} echo '# Known name->service edges' >>${_dot_file} dump_to_dot name_srvc NS fi if [ ${#name_resource[@]} -gt 0 ] then echo >>${_dot_file} echo '# Known name->resource edges' >>${_dot_file} dump_to_dot name_resource NR fi if [ ${#parent_child[@]} -gt 0 ] then echo >>${_dot_file} echo '# Known parent->child edges' >>${_dot_file} dump_to_dot parent_child PC fi if [ ${#list_server[@]} -gt 0 ] then echo >>${_dot_file} echo '# Known Blacklist nodes' >>${_dot_file} _dd_cnt=${#list_server[@]} for (( _dd = 0 ; _dd < _dd_cnt ; _dd++ )) do printf ' LS%04u [label="%s"] ;n' "${_dd}" "${list_server[${_dd}]}" >>${_dot_file} done fi unique_lines address_hits address_hits if [ ${#address_hits[@]} -gt 0 ] then echo >>${_dot_file} echo '# Known address->Blacklist_hit edges' >>${_dot_file} echo '# CAUTION: dig warnings can trigger false hits.' >>${_dot_file} dump_to_dot address_hits AH fi echo >>${_dot_file} echo ' *' >>${_dot_file} echo ' * That is a lot of relationships. Happy graphing.' >>${_dot_file} echo ' */' >>${_dot_file} echo '}' >>${_dot_file} return 0 } # # # # 'Hunt the Spammer' execution flow # # # # # Execution trace is enabled by setting the #+ environment variable SPAMMER_TRACE to the name of a writable file. declare -a _trace_log declare _log_file Appendix A. Contributed Scripts 615
- 622. Advanced Bash-Scripting Guide # Function to fill the trace log trace_logger() { _trace_log[${#_trace_log[@]}]=${_pend_current_} } # Dump trace log to file function variable. declare -f _log_dump _log_dump=pend_dummy # Initially a no-op. # Dump the trace log to a file. dump_log() { local -i _dl_cnt _dl_cnt=${#_trace_log[@]} for (( _dl = 0 ; _dl < _dl_cnt ; _dl++ )) do echo ${_trace_log[${_dl}]} >> ${_log_file} done _dl_cnt=${#_pending_[@]} if [ ${_dl_cnt} -gt 0 ] then _dl_cnt=${_dl_cnt}-1 echo '# # # Operations stack not empty # # #' >> ${_log_file} for (( _dl = ${_dl_cnt} ; _dl >= 0 ; _dl-- )) do echo ${_pending_[${_dl}]} >> ${_log_file} done fi } # # # Utility program 'dig' wrappers # # # # # These wrappers are derived from the #+ examples shown in dig_wrappers.bash. # # The major difference is these return #+ their results as a list in an array. # # See dig_wrappers.bash for details and #+ use that script to develop any changes. # # # # # Short form answer: 'dig' parses answer. # Forward lookup :: Name -> Address # short_fwd <domain_name> <array_name> short_fwd() { local -a _sf_reply local -i _sf_rc local -i _sf_cnt IFS=${NO_WSP} echo -n '.' # echo 'sfwd: '${1} _sf_reply=( $(dig +short ${1} -c in -t a 2>/dev/null) ) _sf_rc=$? if [ ${_sf_rc} -ne 0 ] then _trace_log[${#_trace_log[@]}]='## Lookup error '${_sf_rc}' on '${1}' ##' # [ ${_sf_rc} -ne 9 ] && pend_drop return ${_sf_rc} else Appendix A. Contributed Scripts 616
- 623. Advanced Bash-Scripting Guide # Some versions of 'dig' return warnings on stdout. _sf_cnt=${#_sf_reply[@]} for (( _sf = 0 ; _sf < ${_sf_cnt} ; _sf++ )) do [ 'x'${_sf_reply[${_sf}]:0:2} == 'x;;' ] && unset _sf_reply[${_sf}] done eval $2=( ${_sf_reply[@]} ) fi return 0 } # Reverse lookup :: Address -> Name # short_rev <ip_address> <array_name> short_rev() { local -a _sr_reply local -i _sr_rc local -i _sr_cnt IFS=${NO_WSP} echo -n '.' # echo 'srev: '${1} _sr_reply=( $(dig +short -x ${1} 2>/dev/null) ) _sr_rc=$? if [ ${_sr_rc} -ne 0 ] then _trace_log[${#_trace_log[@]}]='## Lookup error '${_sr_rc}' on '${1}' ##' # [ ${_sr_rc} -ne 9 ] && pend_drop return ${_sr_rc} else # Some versions of 'dig' return warnings on stdout. _sr_cnt=${#_sr_reply[@]} for (( _sr = 0 ; _sr < ${_sr_cnt} ; _sr++ )) do [ 'x'${_sr_reply[${_sr}]:0:2} == 'x;;' ] && unset _sr_reply[${_sr}] done eval $2=( ${_sr_reply[@]} ) fi return 0 } # Special format lookup used to query blacklist servers. # short_text <ip_address> <array_name> short_text() { local -a _st_reply local -i _st_rc local -i _st_cnt IFS=${NO_WSP} # echo 'stxt: '${1} _st_reply=( $(dig +short ${1} -c in -t txt 2>/dev/null) ) _st_rc=$? if [ ${_st_rc} -ne 0 ] then _trace_log[${#_trace_log[@]}]='##Text lookup error '${_st_rc}' on '${1}'##' # [ ${_st_rc} -ne 9 ] && pend_drop return ${_st_rc} else # Some versions of 'dig' return warnings on stdout. _st_cnt=${#_st_reply[@]} for (( _st = 0 ; _st < ${#_st_cnt} ; _st++ )) do [ 'x'${_st_reply[${_st}]:0:2} == 'x;;' ] && Appendix A. Contributed Scripts 617
- 624. Advanced Bash-Scripting Guide unset _st_reply[${_st}] done eval $2=( ${_st_reply[@]} ) fi return 0 } # The long forms, a.k.a., the parse it yourself versions # RFC 2782 Service lookups # dig +noall +nofail +answer _ldap._tcp.openldap.org -t srv # _<service>._<protocol>.<domain_name> # _ldap._tcp.openldap.org. 3600 IN SRV 0 0 389 ldap.openldap.org. # domain TTL Class SRV Priority Weight Port Target # Forward lookup :: Name -> poor man's zone transfer # long_fwd <domain_name> <array_name> long_fwd() { local -a _lf_reply local -i _lf_rc local -i _lf_cnt IFS=${NO_WSP} echo -n ':' # echo 'lfwd: '${1} _lf_reply=( $( dig +noall +nofail +answer +authority +additional ${1} -t soa ${1} -t mx ${1} -t any 2>/dev/null) ) _lf_rc=$? if [ ${_lf_rc} -ne 0 ] then _trace_log[${#_trace_log[@]}]='# Zone lookup err '${_lf_rc}' on '${1}' #' # [ ${_lf_rc} -ne 9 ] && pend_drop return ${_lf_rc} else # Some versions of 'dig' return warnings on stdout. _lf_cnt=${#_lf_reply[@]} for (( _lf = 0 ; _lf < ${_lf_cnt} ; _lf++ )) do [ 'x'${_lf_reply[${_lf}]:0:2} == 'x;;' ] && unset _lf_reply[${_lf}] done eval $2=( ${_lf_reply[@]} ) fi return 0 } # The reverse lookup domain name corresponding to the IPv6 address: # 4321:0:1:2:3:4:567:89ab # would be (nibble, I.E: Hexdigit) reversed: # b.a.9.8.7.6.5.0.4.0.0.0.3.0.0.0.2.0.0.0.1.0.0.0.0.0.0.0.1.2.3.4.IP6.ARPA. # Reverse lookup :: Address -> poor man's delegation chain # long_rev <rev_ip_address> <array_name> long_rev() { local -a _lr_reply local -i _lr_rc local -i _lr_cnt local _lr_dns _lr_dns=${1}'.in-addr.arpa.' IFS=${NO_WSP} echo -n ':' # echo 'lrev: '${1} _lr_reply=( $( Appendix A. Contributed Scripts 618
- 625. Advanced Bash-Scripting Guide dig +noall +nofail +answer +authority +additional ${_lr_dns} -t soa ${_lr_dns} -t any 2>/dev/null) ) _lr_rc=$? if [ ${_lr_rc} -ne 0 ] then _trace_log[${#_trace_log[@]}]='# Deleg lkp error '${_lr_rc}' on '${1}' #' # [ ${_lr_rc} -ne 9 ] && pend_drop return ${_lr_rc} else # Some versions of 'dig' return warnings on stdout. _lr_cnt=${#_lr_reply[@]} for (( _lr = 0 ; _lr < ${_lr_cnt} ; _lr++ )) do [ 'x'${_lr_reply[${_lr}]:0:2} == 'x;;' ] && unset _lr_reply[${_lr}] done eval $2=( ${_lr_reply[@]} ) fi return 0 } # # # Application specific functions # # # # Mung a possible name; suppresses root and TLDs. # name_fixup <string> name_fixup(){ local -a _nf_tmp local -i _nf_end local _nf_str local IFS _nf_str=$(to_lower ${1}) _nf_str=$(to_dot ${_nf_str}) _nf_end=${#_nf_str}-1 [ ${_nf_str:${_nf_end}} != '.' ] && _nf_str=${_nf_str}'.' IFS=${ADR_IFS} _nf_tmp=( ${_nf_str} ) IFS=${WSP_IFS} _nf_end=${#_nf_tmp[@]} case ${_nf_end} in 0) # No dots, only dots. echo return 1 ;; 1) # Only a TLD. echo return 1 ;; 2) # Maybe okay. echo ${_nf_str} return 0 # Needs a lookup table? if [ ${#_nf_tmp[1]} -eq 2 ] then # Country coded TLD. echo return 1 else echo ${_nf_str} return 0 fi ;; esac Appendix A. Contributed Scripts 619
- 626. Advanced Bash-Scripting Guide echo ${_nf_str} return 0 } # Grope and mung original input(s). split_input() { [ ${#uc_name[@]} -gt 0 ] || return 0 local -i _si_cnt local -i _si_len local _si_str unique_lines uc_name uc_name _si_cnt=${#uc_name[@]} for (( _si = 0 ; _si < _si_cnt ; _si++ )) do _si_str=${uc_name[$_si]} if is_address ${_si_str} then uc_address[${#uc_address[@]}]=${_si_str} unset uc_name[$_si] else if ! uc_name[$_si]=$(name_fixup ${_si_str}) then unset ucname[$_si] fi fi done uc_name=( ${uc_name[@]} ) _si_cnt=${#uc_name[@]} _trace_log[${#_trace_log[@]}]='#Input '${_si_cnt}' unchkd name input(s).#' _si_cnt=${#uc_address[@]} _trace_log[${#_trace_log[@]}]='#Input '${_si_cnt}' unchkd addr input(s).#' return 0 } # # # Discovery functions -- recursively interlocked by external data # # # # # # The leading 'if list is empty; return 0' in each is required. # # # # Recursion limiter # limit_chk() <next_level> limit_chk() { local -i _lc_lmt # Check indirection limit. if [ ${indirect} -eq 0 ] || [ $# -eq 0 ] then # The 'do-forever' choice echo 1 # Any value will do. return 0 # OK to continue. else # Limiting is in effect. if [ ${indirect} -lt ${1} ] then echo ${1} # Whatever. return 1 # Stop here. else _lc_lmt=${1}+1 # Bump the given limit. echo ${_lc_lmt} # Echo it. return 0 # OK to continue. fi fi } # For each name in uc_name: Appendix A. Contributed Scripts 620
- 627. Advanced Bash-Scripting Guide # Move name to chk_name. # Add addresses to uc_address. # Pend expand_input_address. # Repeat until nothing new found. # expand_input_name <indirection_limit> expand_input_name() { [ ${#uc_name[@]} -gt 0 ] || return 0 local -a _ein_addr local -a _ein_new local -i _ucn_cnt local -i _ein_cnt local _ein_tst _ucn_cnt=${#uc_name[@]} if ! _ein_cnt=$(limit_chk ${1}) then return 0 fi for (( _ein = 0 ; _ein < _ucn_cnt ; _ein++ )) do if short_fwd ${uc_name[${_ein}]} _ein_new then for (( _ein_cnt = 0 ; _ein_cnt < ${#_ein_new[@]}; _ein_cnt++ )) do _ein_tst=${_ein_new[${_ein_cnt}]} if is_address ${_ein_tst} then _ein_addr[${#_ein_addr[@]}]=${_ein_tst} fi done fi done unique_lines _ein_addr _ein_addr # Scrub duplicates. edit_exact chk_address _ein_addr # Scrub pending detail. edit_exact known_address _ein_addr # Scrub already detailed. if [ ${#_ein_addr[@]} -gt 0 ] # Anything new? then uc_address=( ${uc_address[@]} ${_ein_addr[@]} ) pend_func expand_input_address ${1} _trace_log[${#_trace_log[@]}]='#Add '${#_ein_addr[@]}' unchkd addr inp.#' fi edit_exact chk_name uc_name # Scrub pending detail. edit_exact known_name uc_name # Scrub already detailed. if [ ${#uc_name[@]} -gt 0 ] then chk_name=( ${chk_name[@]} ${uc_name[@]} ) pend_func detail_each_name ${1} fi unset uc_name[@] return 0 } # For each address in uc_address: # Move address to chk_address. # Add names to uc_name. # Pend expand_input_name. # Repeat until nothing new found. # expand_input_address <indirection_limit> expand_input_address() { [ ${#uc_address[@]} -gt 0 ] || return 0 local -a _eia_addr Appendix A. Contributed Scripts 621
- 628. Advanced Bash-Scripting Guide local -a _eia_name local -a _eia_new local -i _uca_cnt local -i _eia_cnt local _eia_tst unique_lines uc_address _eia_addr unset uc_address[@] edit_exact been_there_addr _eia_addr _uca_cnt=${#_eia_addr[@]} [ ${_uca_cnt} -gt 0 ] && been_there_addr=( ${been_there_addr[@]} ${_eia_addr[@]} ) for (( _eia = 0 ; _eia < _uca_cnt ; _eia++ )) do if short_rev ${_eia_addr[${_eia}]} _eia_new then for (( _eia_cnt = 0 ; _eia_cnt < ${#_eia_new[@]} ; _eia_cnt++ )) do _eia_tst=${_eia_new[${_eia_cnt}]} if _eia_tst=$(name_fixup ${_eia_tst}) then _eia_name[${#_eia_name[@]}]=${_eia_tst} fi done fi done unique_lines _eia_name _eia_name # Scrub duplicates. edit_exact chk_name _eia_name # Scrub pending detail. edit_exact known_name _eia_name # Scrub already detailed. if [ ${#_eia_name[@]} -gt 0 ] # Anything new? then uc_name=( ${uc_name[@]} ${_eia_name[@]} ) pend_func expand_input_name ${1} _trace_log[${#_trace_log[@]}]='#Add '${#_eia_name[@]}' unchkd name inp.#' fi edit_exact chk_address _eia_addr # Scrub pending detail. edit_exact known_address _eia_addr # Scrub already detailed. if [ ${#_eia_addr[@]} -gt 0 ] # Anything new? then chk_address=( ${chk_address[@]} ${_eia_addr[@]} ) pend_func detail_each_address ${1} fi return 0 } # The parse-it-yourself zone reply. # The input is the chk_name list. # detail_each_name <indirection_limit> detail_each_name() { [ ${#chk_name[@]} -gt 0 ] || return 0 local -a _den_chk # Names to check local -a _den_name # Names found here local -a _den_address # Addresses found here local -a _den_pair # Pairs found here local -a _den_rev # Reverse pairs found here local -a _den_tmp # Line being parsed local -a _den_auth # SOA contact being parsed local -a _den_new # The zone reply local -a _den_pc # Parent-Child gets big fast local -a _den_ref # So does reference chain local -a _den_nr # Name-Resource can be big local -a _den_na # Name-Address Appendix A. Contributed Scripts 622
- 629. Advanced Bash-Scripting Guide local -a _den_ns # Name-Service local -a _den_achn # Chain of Authority local -i _den_cnt # Count of names to detail local -i _den_lmt # Indirection limit local _den_who # Named being processed local _den_rec # Record type being processed local _den_cont # Contact domain local _den_str # Fixed up name string local _den_str2 # Fixed up reverse local IFS=${WSP_IFS} # Local, unique copy of names to check unique_lines chk_name _den_chk unset chk_name[@] # Done with globals. # Less any names already known edit_exact known_name _den_chk _den_cnt=${#_den_chk[@]} # If anything left, add to known_name. [ ${_den_cnt} -gt 0 ] && known_name=( ${known_name[@]} ${_den_chk[@]} ) # for the list of (previously) unknown names . . . for (( _den = 0 ; _den < _den_cnt ; _den++ )) do _den_who=${_den_chk[${_den}]} if long_fwd ${_den_who} _den_new then unique_lines _den_new _den_new if [ ${#_den_new[@]} -eq 0 ] then _den_pair[${#_den_pair[@]}]='0.0.0.0 '${_den_who} fi # Parse each line in the reply. for (( _line = 0 ; _line < ${#_den_new[@]} ; _line++ )) do IFS=${NO_WSP}$'x09'$'x20' _den_tmp=( ${_den_new[${_line}]} ) IFS=${WSP_IFS} # If usable record and not a warning message . . . if [ ${#_den_tmp[@]} -gt 4 ] && [ 'x'${_den_tmp[0]} != 'x;;' ] then _den_rec=${_den_tmp[3]} _den_nr[${#_den_nr[@]}]=${_den_who}' '${_den_rec} # Begin at RFC1033 (+++) case ${_den_rec} in #<name> [<ttl>] [<class>] SOA <origin> <person> SOA) # Start Of Authority if _den_str=$(name_fixup ${_den_tmp[0]}) then _den_name[${#_den_name[@]}]=${_den_str} _den_achn[${#_den_achn[@]}]=${_den_who}' '${_den_str}' SOA' # SOA origin -- domain name of master zone record if _den_str2=$(name_fixup ${_den_tmp[4]}) then _den_name[${#_den_name[@]}]=${_den_str2} _den_achn[${#_den_achn[@]}]=${_den_who}' '${_den_str2}' SOA.O' fi # Responsible party e-mail address (possibly bogus). Appendix A. Contributed Scripts 623
- 630. Advanced Bash-Scripting Guide # Possibility of first.last@domain.name ignored. set -f if _den_str2=$(name_fixup ${_den_tmp[5]}) then IFS=${ADR_IFS} _den_auth=( ${_den_str2} ) IFS=${WSP_IFS} if [ ${#_den_auth[@]} -gt 2 ] then _den_cont=${_den_auth[1]} for (( _auth = 2 ; _auth < ${#_den_auth[@]} ; _auth++ )) do _den_cont=${_den_cont}'.'${_den_auth[${_auth}]} done _den_name[${#_den_name[@]}]=${_den_cont}'.' _den_achn[${#_den_achn[@]}]=${_den_who}' '${_den_cont}'. SOA.C' fi fi set +f fi ;; A) # IP(v4) Address Record if _den_str=$(name_fixup ${_den_tmp[0]}) then _den_name[${#_den_name[@]}]=${_den_str} _den_pair[${#_den_pair[@]}]=${_den_tmp[4]}' '${_den_str} _den_na[${#_den_na[@]}]=${_den_str}' '${_den_tmp[4]} _den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' A' else _den_pair[${#_den_pair[@]}]=${_den_tmp[4]}' unknown.domain' _den_na[${#_den_na[@]}]='unknown.domain '${_den_tmp[4]} _den_ref[${#_den_ref[@]}]=${_den_who}' unknown.domain A' fi _den_address[${#_den_address[@]}]=${_den_tmp[4]} _den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_tmp[4]} ;; NS) # Name Server Record # Domain name being serviced (may be other than current) if _den_str=$(name_fixup ${_den_tmp[0]}) then _den_name[${#_den_name[@]}]=${_den_str} _den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' NS' # Domain name of service provider if _den_str2=$(name_fixup ${_den_tmp[4]}) then _den_name[${#_den_name[@]}]=${_den_str2} _den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str2}' NSH' _den_ns[${#_den_ns[@]}]=${_den_str2}' NS' _den_pc[${#_den_pc[@]}]=${_den_str}' '${_den_str2} fi fi ;; MX) # Mail Server Record # Domain name being serviced (wildcards not handled here) if _den_str=$(name_fixup ${_den_tmp[0]}) then _den_name[${#_den_name[@]}]=${_den_str} Appendix A. Contributed Scripts 624
- 631. Advanced Bash-Scripting Guide _den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' MX' fi # Domain name of service provider if _den_str=$(name_fixup ${_den_tmp[5]}) then _den_name[${#_den_name[@]}]=${_den_str} _den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' MXH' _den_ns[${#_den_ns[@]}]=${_den_str}' MX' _den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_str} fi ;; PTR) # Reverse address record # Special name if _den_str=$(name_fixup ${_den_tmp[0]}) then _den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' PTR' # Host name (not a CNAME) if _den_str2=$(name_fixup ${_den_tmp[4]}) then _den_rev[${#_den_rev[@]}]=${_den_str}' '${_den_str2} _den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str2}' PTRH' _den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_str} fi fi ;; AAAA) # IP(v6) Address Record if _den_str=$(name_fixup ${_den_tmp[0]}) then _den_name[${#_den_name[@]}]=${_den_str} _den_pair[${#_den_pair[@]}]=${_den_tmp[4]}' '${_den_str} _den_na[${#_den_na[@]}]=${_den_str}' '${_den_tmp[4]} _den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' AAAA' else _den_pair[${#_den_pair[@]}]=${_den_tmp[4]}' unknown.domain' _den_na[${#_den_na[@]}]='unknown.domain '${_den_tmp[4]} _den_ref[${#_den_ref[@]}]=${_den_who}' unknown.domain' fi # No processing for IPv6 addresses _den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_tmp[4]} ;; CNAME) # Alias name record # Nickname if _den_str=$(name_fixup ${_den_tmp[0]}) then _den_name[${#_den_name[@]}]=${_den_str} _den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' CNAME' _den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_str} fi # Hostname if _den_str=$(name_fixup ${_den_tmp[4]}) then _den_name[${#_den_name[@]}]=${_den_str} _den_ref[${#_den_ref[@]}]=${_den_who}' '${_den_str}' CHOST' _den_pc[${#_den_pc[@]}]=${_den_who}' '${_den_str} fi ;; # TXT) # ;; esac Appendix A. Contributed Scripts 625
- 632. Advanced Bash-Scripting Guide fi done else # Lookup error == 'A' record 'unknown address' _den_pair[${#_den_pair[@]}]='0.0.0.0 '${_den_who} fi done # Control dot array growth. unique_lines _den_achn _den_achn # Works best, all the same. edit_exact auth_chain _den_achn # Works best, unique items. if [ ${#_den_achn[@]} -gt 0 ] then IFS=${NO_WSP} auth_chain=( ${auth_chain[@]} ${_den_achn[@]} ) IFS=${WSP_IFS} fi unique_lines _den_ref _den_ref # Works best, all the same. edit_exact ref_chain _den_ref # Works best, unique items. if [ ${#_den_ref[@]} -gt 0 ] then IFS=${NO_WSP} ref_chain=( ${ref_chain[@]} ${_den_ref[@]} ) IFS=${WSP_IFS} fi unique_lines _den_na _den_na edit_exact name_address _den_na if [ ${#_den_na[@]} -gt 0 ] then IFS=${NO_WSP} name_address=( ${name_address[@]} ${_den_na[@]} ) IFS=${WSP_IFS} fi unique_lines _den_ns _den_ns edit_exact name_srvc _den_ns if [ ${#_den_ns[@]} -gt 0 ] then IFS=${NO_WSP} name_srvc=( ${name_srvc[@]} ${_den_ns[@]} ) IFS=${WSP_IFS} fi unique_lines _den_nr _den_nr edit_exact name_resource _den_nr if [ ${#_den_nr[@]} -gt 0 ] then IFS=${NO_WSP} name_resource=( ${name_resource[@]} ${_den_nr[@]} ) IFS=${WSP_IFS} fi unique_lines _den_pc _den_pc edit_exact parent_child _den_pc if [ ${#_den_pc[@]} -gt 0 ] then IFS=${NO_WSP} parent_child=( ${parent_child[@]} ${_den_pc[@]} ) IFS=${WSP_IFS} fi Appendix A. Contributed Scripts 626
- 633. Advanced Bash-Scripting Guide # Update list known_pair (Address and Name). unique_lines _den_pair _den_pair edit_exact known_pair _den_pair if [ ${#_den_pair[@]} -gt 0 ] # Anything new? then IFS=${NO_WSP} known_pair=( ${known_pair[@]} ${_den_pair[@]} ) IFS=${WSP_IFS} fi # Update list of reverse pairs. unique_lines _den_rev _den_rev edit_exact reverse_pair _den_rev if [ ${#_den_rev[@]} -gt 0 ] # Anything new? then IFS=${NO_WSP} reverse_pair=( ${reverse_pair[@]} ${_den_rev[@]} ) IFS=${WSP_IFS} fi # Check indirection limit -- give up if reached. if ! _den_lmt=$(limit_chk ${1}) then return 0 fi # Execution engine is LIFO. Order of pend operations is important. # Did we define any new addresses? unique_lines _den_address _den_address # Scrub duplicates. edit_exact known_address _den_address # Scrub already processed. edit_exact un_address _den_address # Scrub already waiting. if [ ${#_den_address[@]} -gt 0 ] # Anything new? then uc_address=( ${uc_address[@]} ${_den_address[@]} ) pend_func expand_input_address ${_den_lmt} _trace_log[${#_trace_log[@]}]='# Add '${#_den_address[@]}' unchkd addr. #' fi # Did we find any new names? unique_lines _den_name _den_name # Scrub duplicates. edit_exact known_name _den_name # Scrub already processed. edit_exact uc_name _den_name # Scrub already waiting. if [ ${#_den_name[@]} -gt 0 ] # Anything new? then uc_name=( ${uc_name[@]} ${_den_name[@]} ) pend_func expand_input_name ${_den_lmt} _trace_log[${#_trace_log[@]}]='#Added '${#_den_name[@]}' unchkd name#' fi return 0 } # The parse-it-yourself delegation reply # Input is the chk_address list. # detail_each_address <indirection_limit> detail_each_address() { [ ${#chk_address[@]} -gt 0 ] || return 0 unique_lines chk_address chk_address edit_exact known_address chk_address if [ ${#chk_address[@]} -gt 0 ] then known_address=( ${known_address[@]} ${chk_address[@]} ) unset chk_address[@] Appendix A. Contributed Scripts 627
- 634. Advanced Bash-Scripting Guide fi return 0 } # # # Application specific output functions # # # # Pretty print the known pairs. report_pairs() { echo echo 'Known network pairs.' col_print known_pair 2 5 30 if [ ${#auth_chain[@]} -gt 0 ] then echo echo 'Known chain of authority.' col_print auth_chain 2 5 30 55 fi if [ ${#reverse_pair[@]} -gt 0 ] then echo echo 'Known reverse pairs.' col_print reverse_pair 2 5 55 fi return 0 } # Check an address against the list of blacklist servers. # A good place to capture for GraphViz: address->status(server(reports)) # check_lists <ip_address> check_lists() { [ $# -eq 1 ] || return 1 local -a _cl_fwd_addr local -a _cl_rev_addr local -a _cl_reply local -i _cl_rc local -i _ls_cnt local _cl_dns_addr local _cl_lkup split_ip ${1} _cl_fwd_addr _cl_rev_addr _cl_dns_addr=$(dot_array _cl_rev_addr)'.' _ls_cnt=${#list_server[@]} echo ' Checking address '${1} for (( _cl = 0 ; _cl < _ls_cnt ; _cl++ )) do _cl_lkup=${_cl_dns_addr}${list_server[${_cl}]} if short_text ${_cl_lkup} _cl_reply then if [ ${#_cl_reply[@]} -gt 0 ] then echo ' Records from '${list_server[${_cl}]} address_hits[${#address_hits[@]}]=${1}' '${list_server[${_cl}]} _hs_RC=2 for (( _clr = 0 ; _clr < ${#_cl_reply[@]} ; _clr++ )) do echo ' '${_cl_reply[${_clr}]} done fi fi done Appendix A. Contributed Scripts 628
- 635. Advanced Bash-Scripting Guide return 0 } # # # The usual application glue # # # # Who did it? credits() { echo echo 'Advanced Bash Scripting Guide: is_spammer.bash, v2, 2004-msz' } # How to use it? # (See also, "Quickstart" at end of script.) usage() { cat <<-'_usage_statement_' The script is_spammer.bash requires either one or two arguments. arg 1) May be one of: a) A domain name b) An IPv4 address c) The name of a file with any mix of names and addresses, one per line. arg 2) May be one of: a) A Blacklist server domain name b) The name of a file with Blacklist server domain names, one per line. c) If not present, a default list of (free) Blacklist servers is used. d) If a filename of an empty, readable, file is given, Blacklist server lookup is disabled. All script output is written to stdout. Return codes: 0 -> All OK, 1 -> Script failure, 2 -> Something is Blacklisted. Requires the external program 'dig' from the 'bind-9' set of DNS programs. See: http://www.isc.org The domain name lookup depth limit defaults to 2 levels. Set the environment variable SPAMMER_LIMIT to change. SPAMMER_LIMIT=0 means 'unlimited' Limit may also be set on the command-line. If arg#1 is an integer, the limit is set to that value and then the above argument rules are applied. Setting the environment variable 'SPAMMER_DATA' to a filename will cause the script to write a GraphViz graphic file. For the development version; Setting the environment variable 'SPAMMER_TRACE' to a filename will cause the execution engine to log a function call trace. _usage_statement_ } # The default list of Blacklist servers: # Many choices, see: http://www.spews.org/lists.html Appendix A. Contributed Scripts 629
- 636. Advanced Bash-Scripting Guide declare -a default_servers # See: http://www.spamhaus.org (Conservative, well maintained) default_servers[0]='sbl-xbl.spamhaus.org' # See: http://ordb.org (Open mail relays) default_servers[1]='relays.ordb.org' # See: http://www.spamcop.net/ (You can report spammers here) default_servers[2]='bl.spamcop.net' # See: http://www.spews.org (An 'early detect' system) default_servers[3]='l2.spews.dnsbl.sorbs.net' # See: http://www.dnsbl.us.sorbs.net/using.shtml default_servers[4]='dnsbl.sorbs.net' # See: http://dsbl.org/usage (Various mail relay lists) default_servers[5]='list.dsbl.org' default_servers[6]='multihop.dsbl.org' default_servers[7]='unconfirmed.dsbl.org' # User input argument #1 setup_input() { if [ -e ${1} ] && [ -r ${1} ] # Name of readable file then file_to_array ${1} uc_name echo 'Using filename >'${1}'< as input.' else if is_address ${1} # IP address? then uc_address=( ${1} ) echo 'Starting with address >'${1}'<' else # Must be a name. uc_name=( ${1} ) echo 'Starting with domain name >'${1}'<' fi fi return 0 } # User input argument #2 setup_servers() { if [ -e ${1} ] && [ -r ${1} ] # Name of a readable file then file_to_array ${1} list_server echo 'Using filename >'${1}'< as blacklist server list.' else list_server=( ${1} ) echo 'Using blacklist server >'${1}'<' fi return 0 } # User environment variable SPAMMER_TRACE live_log_die() { if [ ${SPAMMER_TRACE:=} ] # Wants trace log? then if [ ! -e ${SPAMMER_TRACE} ] then if ! touch ${SPAMMER_TRACE} 2>/dev/null then pend_func echo $(printf '%qn' 'Unable to create log file >'${SPAMMER_TRACE}'<') pend_release exit 1 fi _log_file=${SPAMMER_TRACE} Appendix A. Contributed Scripts 630
- 637. Advanced Bash-Scripting Guide _pend_hook_=trace_logger _log_dump=dump_log else if [ ! -w ${SPAMMER_TRACE} ] then pend_func echo $(printf '%qn' 'Unable to write log file >'${SPAMMER_TRACE}'<') pend_release exit 1 fi _log_file=${SPAMMER_TRACE} echo '' > ${_log_file} _pend_hook_=trace_logger _log_dump=dump_log fi fi return 0 } # User environment variable SPAMMER_DATA data_capture() { if [ ${SPAMMER_DATA:=} ] # Wants a data dump? then if [ ! -e ${SPAMMER_DATA} ] then if ! touch ${SPAMMER_DATA} 2>/dev/null then pend_func echo $(printf '%q]n' 'Unable to create data output file >'${SPAMMER_DATA}'<') pend_release exit 1 fi _dot_file=${SPAMMER_DATA} _dot_dump=dump_dot else if [ ! -w ${SPAMMER_DATA} ] then pend_func echo $(printf '%qn' 'Unable to write data output file >'${SPAMMER_DATA}'<') pend_release exit 1 fi _dot_file=${SPAMMER_DATA} _dot_dump=dump_dot fi fi return 0 } # Grope user specified arguments. do_user_args() { if [ $# -gt 0 ] && is_number $1 then indirect=$1 shift fi case $# in # Did user treat us well? 1) if ! setup_input $1 # Needs error checking. then pend_release Appendix A. Contributed Scripts 631
- 638. Advanced Bash-Scripting Guide $_log_dump exit 1 fi list_server=( ${default_servers[@]} ) _list_cnt=${#list_server[@]} echo 'Using default blacklist server list.' echo 'Search depth limit: '${indirect} ;; 2) if ! setup_input $1 # Needs error checking. then pend_release $_log_dump exit 1 fi if ! setup_servers $2 # Needs error checking. then pend_release $_log_dump exit 1 fi echo 'Search depth limit: '${indirect} ;; *) pend_func usage pend_release $_log_dump exit 1 ;; esac return 0 } # A general purpose debug tool. # list_array <array_name> list_array() { [ $# -eq 1 ] || return 1 # One argument required. local -a _la_lines set -f local IFS=${NO_WSP} eval _la_lines=( ${$1[@]} ) echo echo "Element count "${#_la_lines[@]}" array "${1} local _ln_cnt=${#_la_lines[@]} for (( _i = 0; _i < ${_ln_cnt}; _i++ )) do echo 'Element '$_i' >'${_la_lines[$_i]}'<' done set +f return 0 } # # # 'Hunt the Spammer' program code # # # pend_init # Ready stack engine. pend_func credits # Last thing to print. # # # Deal with user # # # live_log_die # Setup debug trace log. data_capture # Setup data capture file. echo Appendix A. Contributed Scripts 632
- 639. Advanced Bash-Scripting Guide do_user_args $@ # # # Haven't exited yet - There is some hope # # # # Discovery group - Execution engine is LIFO - pend # in reverse order of execution. _hs_RC=0 # Hunt the Spammer return code pend_mark pend_func report_pairs # Report name-address pairs. # The two detail_* are mutually recursive functions. # They also pend expand_* functions as required. # These two (the last of ???) exit the recursion. pend_func detail_each_address # Get all resources of addresses. pend_func detail_each_name # Get all resources of names. # The two expand_* are mutually recursive functions, #+ which pend additional detail_* functions as required. pend_func expand_input_address 1 # Expand input names by address. pend_func expand_input_name 1 # #xpand input addresses by name. # Start with a unique set of names and addresses. pend_func unique_lines uc_address uc_address pend_func unique_lines uc_name uc_name # Separate mixed input of names and addresses. pend_func split_input pend_release # # # Pairs reported -- Unique list of IP addresses found echo _ip_cnt=${#known_address[@]} if [ ${#list_server[@]} -eq 0 ] then echo 'Blacklist server list empty, none checked.' else if [ ${_ip_cnt} -eq 0 ] then echo 'Known address list empty, none checked.' else _ip_cnt=${_ip_cnt}-1 # Start at top. echo 'Checking Blacklist servers.' for (( _ip = _ip_cnt ; _ip >= 0 ; _ip-- )) do pend_func check_lists $( printf '%qn' ${known_address[$_ip]} ) done fi fi pend_release $_dot_dump # Graphics file dump $_log_dump # Execution trace echo ############################## # Example output from script # ############################## :<<-'_is_spammer_outputs_' ./is_spammer.bash 0 web4.alojamentos7.com Starting with domain name >web4.alojamentos7.com< Using default blacklist server list. Appendix A. Contributed Scripts 633
- 640. Advanced Bash-Scripting Guide Search depth limit: 0 .:....::::...:::...:::.......::..::...:::.......:: Known network pairs. 66.98.208.97 web4.alojamentos7.com. 66.98.208.97 ns1.alojamentos7.com. 69.56.202.147 ns2.alojamentos.ws. 66.98.208.97 alojamentos7.com. 66.98.208.97 web.alojamentos7.com. 69.56.202.146 ns1.alojamentos.ws. 69.56.202.146 alojamentos.ws. 66.235.180.113 ns1.alojamentos.org. 66.235.181.192 ns2.alojamentos.org. 66.235.180.113 alojamentos.org. 66.235.180.113 web6.alojamentos.org. 216.234.234.30 ns1.theplanet.com. 12.96.160.115 ns2.theplanet.com. 216.185.111.52 mail1.theplanet.com. 69.56.141.4 spooling.theplanet.com. 216.185.111.40 theplanet.com. 216.185.111.40 www.theplanet.com. 216.185.111.52 mail.theplanet.com. Checking Blacklist servers. Checking address 66.98.208.97 Records from dnsbl.sorbs.net "Spam Received See: http://www.dnsbl.sorbs.net/lookup.shtml?66.98.208.97" Checking address 69.56.202.147 Checking address 69.56.202.146 Checking address 66.235.180.113 Checking address 66.235.181.192 Checking address 216.185.111.40 Checking address 216.234.234.30 Checking address 12.96.160.115 Checking address 216.185.111.52 Checking address 69.56.141.4 Advanced Bash Scripting Guide: is_spammer.bash, v2, 2004-msz _is_spammer_outputs_ exit ${_hs_RC} #################################################### # The script ignores everything from here on down # #+ because of the 'exit' command, just above. # #################################################### Quickstart ========== Prerequisites Bash version 2.05b or 3.00 (bash --version) A version of Bash which supports arrays. Array support is included by default Bash configurations. 'dig,' version 9.x.x (dig $HOSTNAME, see first line of output) A version of dig which supports the +short options. See: dig_wrappers.bash for details. Appendix A. Contributed Scripts 634
- 641. Advanced Bash-Scripting Guide Optional Prerequisites 'named,' a local DNS caching program. Any flavor will do. Do twice: dig $HOSTNAME Check near bottom of output for: SERVER: 127.0.0.1#53 That means you have one running. Optional Graphics Support 'date,' a standard *nix thing. (date -R) dot Program to convert graphic description file to a diagram. (dot -V) A part of the Graph-Viz set of programs. See: [http://www.research.att.com/sw/tools/graphviz||GraphViz] 'dotty,' a visual editor for graphic description files. Also a part of the Graph-Viz set of programs. Quick Start In the same directory as the is_spammer.bash script; Do: ./is_spammer.bash Usage Details 1. Blacklist server choices. (a) To use default, built-in list: Do nothing. (b) To use your own list: i. Create a file with a single Blacklist server domain name per line. ii. Provide that filename as the last argument to the script. (c) To use a single Blacklist server: Last argument to the script. (d) To disable Blacklist lookups: i. Create an empty file (touch spammer.nul) Your choice of filename. ii. Provide the filename of that empty file as the last argument to the script. 2. Search depth limit. (a) To use the default value of 2: Do nothing. (b) To set a different limit: A limit of 0 means: no limit. i. export SPAMMER_LIMIT=1 Appendix A. Contributed Scripts 635
- 642. Advanced Bash-Scripting Guide or whatever limit you want. ii. OR provide the desired limit as the first argument to the script. 3. Optional execution trace log. (a) To use the default setting of no log output: Do nothing. (b) To write an execution trace log: export SPAMMER_TRACE=spammer.log or whatever filename you want. 4. Optional graphic description file. (a) To use the default setting of no graphic file: Do nothing. (b) To write a Graph-Viz graphic description file: export SPAMMER_DATA=spammer.dot or whatever filename you want. 5. Where to start the search. (a) Starting with a single domain name: i. Without a command-line search limit: First argument to script. ii. With a command-line search limit: Second argument to script. (b) Starting with a single IP address: i. Without a command-line search limit: First argument to script. ii. With a command-line search limit: Second argument to script. (c) Starting with (mixed) multiple name(s) and/or address(es): Create a file with one name or address per line. Your choice of filename. i. Without a command-line search limit: Filename as first argument to script. ii. With a command-line search limit: Filename as second argument to script. 6. What to do with the display output. (a) To view display output on screen: Do nothing. (b) To save display output to a file: Redirect stdout to a filename. (c) To discard display output: Redirect stdout to /dev/null. 7. Temporary end of decision making. press RETURN wait (optionally, watch the dots and colons). 8. Optionally check the return code. Appendix A. Contributed Scripts 636
- 643. Advanced Bash-Scripting Guide (a) Return code 0: All OK (b) Return code 1: Script setup failure (c) Return code 2: Something was blacklisted. 9. Where is my graph (diagram)? The script does not directly produce a graph (diagram). It only produces a graphic description file. You can process the graphic descriptor file that was output with the 'dot' program. Until you edit that descriptor file, to describe the relationships you want shown, all that you will get is a bunch of labeled name and address nodes. All of the script's discovered relationships are within a comment block in the graphic descriptor file, each with a descriptive heading. The editing required to draw a line between a pair of nodes from the information in the descriptor file may be done with a text editor. Given these lines somewhere in the descriptor file: # Known domain name nodes N0000 [label="guardproof.info."] ; N0002 [label="third.guardproof.info."] ; # Known address nodes A0000 [label="61.141.32.197"] ; /* # Known name->address edges NA0000 third.guardproof.info. 61.141.32.197 # Known parent->child edges PC0000 guardproof.info. third.guardproof.info. */ Turn that into the following lines by substituting node identifiers into the relationships: # Known domain name nodes N0000 [label="guardproof.info."] ; Appendix A. Contributed Scripts 637
- 644. Advanced Bash-Scripting Guide N0002 [label="third.guardproof.info."] ; # Known address nodes A0000 [label="61.141.32.197"] ; # PC0000 guardproof.info. third.guardproof.info. N0000->N0002 ; # NA0000 third.guardproof.info. 61.141.32.197 N0002->A0000 ; /* # Known name->address edges NA0000 third.guardproof.info. 61.141.32.197 # Known parent->child edges PC0000 guardproof.info. third.guardproof.info. */ Process that with the 'dot' program, and you have your first network diagram. In addition to the conventional graphic edges, the descriptor file includes similar format pair-data that describes services, zone records (sub-graphs?), blacklisted addresses, and other things which might be interesting to include in your graph. This additional information could be displayed as different node shapes, colors, line sizes, etc. The descriptor file can also be read and edited by a Bash script (of course). You should be able to find most of the functions required within the "is_spammer.bash" script. # End Quickstart. Additional Note ========== ==== Michael Zick points out that there is a "makeviz.bash" interactive Web site at rediris.es. Can't give the full URL, since this is not Appendix A. Contributed Scripts 638
- 645. Advanced Bash-Scripting Guide a publically accessible site. Another anti-spam script. Example A-29. Spammer Hunt #!/bin/bash # whx.sh: "whois" spammer lookup # Author: Walter Dnes # Slight revisions (first section) by ABS Guide author. # Used in ABS Guide with permission. # Needs version 3.x or greater of Bash to run (because of =~ operator). # Commented by script author and ABS Guide author. E_BADARGS=65 # Missing command-line arg. E_NOHOST=66 # Host not found. E_TIMEOUT=67 # Host lookup timed out. E_UNDEF=68 # Some other (undefined) error. HOSTWAIT=10 # Specify up to 10 seconds for host query reply. # The actual wait may be a bit longer. OUTFILE=whois.txt # Output file. PORT=4321 if [ -z "$1" ] # Check for (required) command-line arg. then echo "Usage: $0 domain name or IP address" exit $E_BADARGS fi if [[ "$1" =~ "[a-zA-Z][a-zA-Z]$" ]] # Ends in two alpha chars? then # It's a domain name && must do host lookup. IPADDR=$(host -W $HOSTWAIT $1 | awk '{print $4}') # Doing host lookup to get IP address. # Extract final field. else IPADDR="$1" # Command-line arg was IP address. fi echo; echo "IP Address is: "$IPADDR""; echo if [ -e "$OUTFILE" ] then rm -f "$OUTFILE" echo "Stale output file "$OUTFILE" removed."; echo fi # Sanity checks. # (This section needs more work.) # =============================== if [ -z "$IPADDR" ] # No response. then echo "Host not found!" Appendix A. Contributed Scripts 639
- 646. Advanced Bash-Scripting Guide exit $E_NOHOST # Bail out. fi if [[ "$IPADDR" =~ "^[;;]" ]] # ;; connection timed out; no servers could be reached then echo "Host lookup timed out!" exit $E_TIMEOUT # Bail out. fi if [[ "$IPADDR" =~ "[(NXDOMAIN)]$" ]] # Host xxxxxxxxx.xxx not found: 3(NXDOMAIN) then echo "Host not found!" exit $E_NOHOST # Bail out. fi if [[ "$IPADDR" =~ "[(SERVFAIL)]$" ]] # Host xxxxxxxxx.xxx not found: 2(SERVFAIL) then echo "Host not found!" exit $E_NOHOST # Bail out. fi # ======================== Main body of script ======================== AFRINICquery() { # Define the function that queries AFRINIC. Echo a notification to the #+ screen, and then run the actual query, redirecting output to $OUTFILE. echo "Searching for $IPADDR in whois.afrinic.net" whois -h whois.afrinic.net "$IPADDR" > $OUTFILE # Check for presence of reference to an rwhois. # Warn about non-functional rwhois.infosat.net server #+ and attempt rwhois query. if grep -e "^remarks: .*rwhois.[^ ]+" "$OUTFILE" then echo " " >> $OUTFILE echo "***" >> $OUTFILE echo "***" >> $OUTFILE echo "Warning: rwhois.infosat.net was not working as of 2005/02/02" >> $OUTFILE echo " when this script was written." >> $OUTFILE echo "***" >> $OUTFILE echo "***" >> $OUTFILE echo " " >> $OUTFILE RWHOIS=`grep "^remarks: .*rwhois.[^ ]+" "$OUTFILE" | tail -n 1 | sed "s/(^.*)(rwhois..*)(:4.*)/2/"` whois -h ${RWHOIS}:${PORT} "$IPADDR" >> $OUTFILE fi } APNICquery() { echo "Searching for $IPADDR in whois.apnic.net" whois -h whois.apnic.net "$IPADDR" > $OUTFILE # Just about every country has its own internet registrar. # I don't normally bother consulting them, because the regional registry #+ usually supplies sufficient information. Appendix A. Contributed Scripts 640
- 647. Advanced Bash-Scripting Guide # There are a few exceptions, where the regional registry simply #+ refers to the national registry for direct data. # These are Japan and South Korea in APNIC, and Brasil in LACNIC. # The following if statement checks $OUTFILE (whois.txt) for the presence #+ of "KR" (South Korea) or "JP" (Japan) in the country field. # If either is found, the query is re-run against the appropriate #+ national registry. if grep -E "^country:[ ]+KR$" "$OUTFILE" then echo "Searching for $IPADDR in whois.krnic.net" whois -h whois.krnic.net "$IPADDR" >> $OUTFILE elif grep -E "^country:[ ]+JP$" "$OUTFILE" then echo "Searching for $IPADDR in whois.nic.ad.jp" whois -h whois.nic.ad.jp "$IPADDR"/e >> $OUTFILE fi } ARINquery() { echo "Searching for $IPADDR in whois.arin.net" whois -h whois.arin.net "$IPADDR" > $OUTFILE # Several large internet providers listed by ARIN have their own #+ internal whois service, referred to as "rwhois". # A large block of IP addresses is listed with the provider #+ under the ARIN registry. # To get the IP addresses of 2nd-level ISPs or other large customers, #+ one has to refer to the rwhois server on port 4321. # I originally started with a bunch of "if" statements checking for #+ the larger providers. # This approach is unwieldy, and there's always another rwhois server #+ that I didn't know about. # A more elegant approach is to check $OUTFILE for a reference #+ to a whois server, parse that server name out of the comment section, #+ and re-run the query against the appropriate rwhois server. # The parsing looks a bit ugly, with a long continued line inside #+ backticks. # But it only has to be done once, and will work as new servers are added. #@ ABS Guide author comment: it isn't all that ugly, and is, in fact, #@+ an instructive use of Regular Expressions. if grep -E "^Comment: .*rwhois.[^ ]+" "$OUTFILE" then RWHOIS=`grep -e "^Comment:.*rwhois.[^ ]+" "$OUTFILE" | tail -n 1 | sed "s/^(.*)(rwhois.[^ ]+)(.*$)/2/"` echo "Searching for $IPADDR in ${RWHOIS}" whois -h ${RWHOIS}:${PORT} "$IPADDR" >> $OUTFILE fi } LACNICquery() { echo "Searching for $IPADDR in whois.lacnic.net" whois -h whois.lacnic.net "$IPADDR" > $OUTFILE # The following if statement checks $OUTFILE (whois.txt) for the presence of #+ "BR" (Brasil) in the country field. # If it is found, the query is re-run against whois.registro.br. if grep -E "^country:[ ]+BR$" "$OUTFILE" then echo "Searching for $IPADDR in whois.registro.br" Appendix A. Contributed Scripts 641
- 648. Advanced Bash-Scripting Guide whois -h whois.registro.br "$IPADDR" >> $OUTFILE fi } RIPEquery() { echo "Searching for $IPADDR in whois.ripe.net" whois -h whois.ripe.net "$IPADDR" > $OUTFILE } # Initialize a few variables. # * slash8 is the most significant octet # * slash16 consists of the two most significant octets # * octet2 is the second most significant octet slash8=`echo $IPADDR | cut -d. -f 1` if [ -z "$slash8" ] # Yet another sanity check. then echo "Undefined error!" exit $E_UNDEF fi slash16=`echo $IPADDR | cut -d. -f 1-2` # ^ Period specified as 'cut" delimiter. if [ -z "$slash16" ] then echo "Undefined error!" exit $E_UNDEF fi octet2=`echo $slash16 | cut -d. -f 2` if [ -z "$octet2" ] then echo "Undefined error!" exit $E_UNDEF fi # Check for various odds and ends of reserved space. # There is no point in querying for those addresses. if [ $slash8 == 0 ]; then echo $IPADDR is '"This Network"' space; Not querying elif [ $slash8 == 10 ]; then echo $IPADDR is RFC1918 space; Not querying elif [ $slash8 == 14 ]; then echo $IPADDR is '"Public Data Network"' space; Not querying elif [ $slash8 == 127 ]; then echo $IPADDR is loopback space; Not querying elif [ $slash16 == 169.254 ]; then echo $IPADDR is link-local space; Not querying elif [ $slash8 == 172 ] && [ $octet2 -ge 16 ] && [ $octet2 -le 31 ];then echo $IPADDR is RFC1918 space; Not querying elif [ $slash16 == 192.168 ]; then echo $IPADDR is RFC1918 space; Not querying elif [ $slash8 -ge 224 ]; then echo $IPADDR is either Multicast or reserved space; Not querying elif [ $slash8 -ge 200 ] && [ $slash8 -le 201 ]; then LACNICquery "$IPADDR" elif [ $slash8 -ge 202 ] && [ $slash8 -le 203 ]; then APNICquery "$IPADDR" elif [ $slash8 -ge 210 ] && [ $slash8 -le 211 ]; then APNICquery "$IPADDR" elif [ $slash8 -ge 218 ] && [ $slash8 -le 223 ]; then APNICquery "$IPADDR" Appendix A. Contributed Scripts 642
- 649. Advanced Bash-Scripting Guide # If we got this far without making a decision, query ARIN. # If a reference is found in $OUTFILE to APNIC, AFRINIC, LACNIC, or RIPE, #+ query the appropriate whois server. else ARINquery "$IPADDR" if grep "whois.afrinic.net" "$OUTFILE"; then AFRINICquery "$IPADDR" elif grep -E "^OrgID:[ ]+RIPE$" "$OUTFILE"; then RIPEquery "$IPADDR" elif grep -E "^OrgID:[ ]+APNIC$" "$OUTFILE"; then APNICquery "$IPADDR" elif grep -E "^OrgID:[ ]+LACNIC$" "$OUTFILE"; then LACNICquery "$IPADDR" fi fi #@ --------------------------------------------------------------- # Try also: # wget http://logi.cc/nw/whois.php3?ACTION=doQuery&DOMAIN=$IPADDR #@ --------------------------------------------------------------- # We've now finished the querying. # Echo a copy of the final result to the screen. cat $OUTFILE # Or "less $OUTFILE" . . . exit 0 #@ ABS Guide author comments: #@ Nothing fancy here, but still a very useful tool for hunting spammers. #@ Sure, the script can be cleaned up some, and it's still a bit buggy, #@+ (exercise for reader), but all the same, it's a nice piece of coding #@+ by Walter Dnes. #@ Thank you! "Little Monster's" front end to wget. Example A-30. Making wget easier to use #!/bin/bash # wgetter2.bash # Author: Little Monster [monster@monstruum.co.uk] # ==> Used in ABS Guide with permission of script author. # ==> This script still needs debugging and fixups (exercise for reader). # ==> It could also use some additional editing in the comments. # This is wgetter2 -- #+ a Bash script to make wget a bit more friendly, and save typing. # Carefully crafted by Little Monster. # More or less complete on 02/02/2005. # If you think this script can be improved, #+ email me at: monster@monstruum.co.uk # ==> and cc: to the author of the ABS Guide, please. # This script is licenced under the GPL. # You are free to copy, alter and re-use it, Appendix A. Contributed Scripts 643
- 650. Advanced Bash-Scripting Guide #+ but please don't try to claim you wrote it. # Log your changes here instead. # ======================================================================= # changelog: # 07/02/2005. Fixups by Little Monster. # 02/02/2005. Minor additions by Little Monster. # (See after # +++++++++++ ) # 29/01/2005. Minor stylistic edits and cleanups by author of ABS Guide. # Added exit error codes. # 22/11/2004. Finished initial version of second version of wgetter: # wgetter2 is born. # 01/12/2004. Changed 'runn' function so it can be run 2 ways -- # either ask for a file name or have one input on the CL. # 01/12/2004. Made sensible handling of no URL's given. # 01/12/2004. Made loop of main options, so you don't # have to keep calling wgetter 2 all the time. # Runs as a session instead. # 01/12/2004. Added looping to 'runn' function. # Simplified and improved. # 01/12/2004. Added state to recursion setting. # Enables re-use of previous value. # 05/12/2004. Modified the file detection routine in the 'runn' function # so it's not fooled by empty values, and is cleaner. # 01/02/2004. Added cookie finding routine from later version (which # isn't ready yet), so as not to have hard-coded paths. # ======================================================================= # Error codes for abnormal exit. E_USAGE=67 # Usage message, then quit. E_NO_OPTS=68 # No command-line args entered. E_NO_URLS=69 # No URLs passed to script. E_NO_SAVEFILE=70 # No save filename passed to script. E_USER_EXIT=71 # User decides to quit. # Basic default wget command we want to use. # This is the place to change it, if required. # NB: if using a proxy, set http_proxy = yourproxy in .wgetrc. # Otherwise delete --proxy=on, below. # ==================================================================== CommandA="wget -nc -c -t 5 --progress=bar --random-wait --proxy=on -r" # ==================================================================== # -------------------------------------------------------------------- # Set some other variables and explain them. pattern=" -A .jpg,.JPG,.jpeg,.JPEG,.gif,.GIF,.htm,.html,.shtml,.php" # wget's option to only get certain types of file. # comment out if not using today=`date +%F` # Used for a filename. home=$HOME # Set HOME to an internal variable. # In case some other path is used, change it here. depthDefault=3 # Set a sensible default recursion. Depth=$depthDefault # Otherwise user feedback doesn't tie in properly. RefA="" # Set blank referring page. Flag="" # Default to not saving anything, #+ or whatever else might be wanted in future. lister="" # Used for passing a list of urls directly to wget. Appendix A. Contributed Scripts 644
- 651. Advanced Bash-Scripting Guide Woptions="" # Used for passing wget some options for itself. inFile="" # Used for the run function. newFile="" # Used for the run function. savePath="$home/w-save" Config="$home/.wgetter2rc" # This is where some variables can be stored, #+ if permanently changed from within the script. Cookie_List="$home/.cookielist" # So we know where the cookies are kept . . . cFlag="" # Part of the cookie file selection routine. # Define the options available. Easy to change letters here if needed. # These are the optional options; you don't just wait to be asked. save=s # Save command instead of executing it. cook=c # Change cookie file for this session. help=h # Usage guide. list=l # Pass wget the -i option and URL list. runn=r # Run saved commands as an argument to the option. inpu=i # Run saved commands interactively. wopt=w # Allow to enter options to pass directly to wget. # -------------------------------------------------------------------- if [ -z "$1" ]; then # Make sure we get something for wget to eat. echo "You must at least enter a URL or option!" echo "-$help for usage." exit $E_NO_OPTS fi # +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ # added added added added added added added added added added added added if [ ! -e "$Config" ]; then # See if configuration file exists. echo "Creating configuration file, $Config" echo "# This is the configuration file for wgetter2" > "$Config" echo "# Your customised settings will be saved in this file" >> "$Config" else source $Config # Import variables we set outside the script. fi if [ ! -e "$Cookie_List" ]; then # Set up a list of cookie files, if there isn't one. echo "Hunting for cookies . . ." find -name cookies.txt >> $Cookie_List # Create the list of cookie files. fi # Isolate this in its own 'if' statement, #+ in case we got interrupted while searching. if [ -z "$cFlag" ]; then # If we haven't already done this . . . echo # Make a nice space after the command prompt. echo "Looks like you haven't set up your source of cookies yet." n=0 # Make sure the counter #+ doesn't contain random values. while read; do Cookies[$n]=$REPLY # Put the cookie files we found into an array. echo "$n) ${Cookies[$n]}" # Create a menu. n=$(( n + 1 )) # Increment the counter. done < $Cookie_List # Feed the read statement. echo "Enter the number of the cookie file you want to use." echo "If you won't be using cookies, just press RETURN." Appendix A. Contributed Scripts 645
- 652. Advanced Bash-Scripting Guide echo echo "I won't be asking this again. Edit $Config" echo "If you decide to change at a later date" echo "or use the -${cook} option for per session changes." read if [ ! -z $REPLY ]; then # User didn't just press return. Cookie=" --load-cookies ${Cookies[$REPLY]}" # Set the variable here as well as in the config file. echo "Cookie=" --load-cookies ${Cookies[$REPLY]}"" >> $Config fi echo "cFlag=1" >> $Config # So we know not to ask again. fi # end added section end added section end added section end added section # +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ # Another variable. # This one may or may not be subject to variation. # A bit like the small print. CookiesON=$Cookie # echo "cookie file is $CookiesON" # For debugging. # echo "home is ${home}" # For debugging. # Got caught with this one! wopts() { echo "Enter options to pass to wget." echo "It is assumed you know what you're doing." echo echo "You can pass their arguments here too." # That is to say, everything passed here is passed to wget. read Wopts # Read in the options to be passed to wget. Woptions=" $Wopts" # ^ Why the leading space? # Assign to another variable. # Just for fun, or something . . . echo "passing options ${Wopts} to wget" # Mainly for debugging. # Is cute. return } save_func() { echo "Settings will be saved." if [ ! -d $savePath ]; then # See if directory exists. mkdir $savePath # Create the directory to save things in #+ if it isn't already there. fi Flag=S # Tell the final bit of code what to do. Appendix A. Contributed Scripts 646
- 653. Advanced Bash-Scripting Guide # Set a flag since stuff is done in main. return } usage() # Tell them how it works. { echo "Welcome to wgetter. This is a front end to wget." echo "It will always run wget with these options:" echo "$CommandA" echo "and the pattern to match: $pattern (which you can change at the top of this script)." echo "It will also ask you for recursion depth, and if you want to use a referring page." echo "Wgetter accepts the following options:" echo "" echo "-$help : Display this help." echo "-$save : Save the command to a file $savePath/wget-($today) instead of running it." echo "-$runn : Run saved wget commands instead of starting a new one -" echo "Enter filename as argument to this option." echo "-$inpu : Run saved wget commands interactively --" echo "The script will ask you for the filename." echo "-$cook : Change the cookies file for this session." echo "-$list : Tell wget to use URL's from a list instead of from the command-line." echo "-$wopt : Pass any other options direct to wget." echo "" echo "See the wget man page for additional options you can pass to wget." echo "" exit $E_USAGE # End here. Don't process anything else. } list_func() # Gives the user the option to use the -i option to wget, #+ and a list of URLs. { while [ 1 ]; do echo "Enter the name of the file containing URL's (press q to change your mind)." read urlfile if [ ! -e "$urlfile" ] && [ "$urlfile" != q ]; then # Look for a file, or the quit option. echo "That file does not exist!" elif [ "$urlfile" = q ]; then # Check quit option. echo "Not using a url list." return else echo "using $urlfile." echo "If you gave url's on the command-line, I'll use those first." # Report wget standard behaviour to the user. lister=" -i $urlfile" # This is what we want to pass to wget. return fi done } Appendix A. Contributed Scripts 647
- 654. Advanced Bash-Scripting Guide cookie_func() # Give the user the option to use a different cookie file. { while [ 1 ]; do echo "Change the cookies file. Press return if you don't want to change it." read Cookies # NB: this is not the same as Cookie, earlier. # There is an 's' on the end. # Bit like chocolate chips. if [ -z "$Cookies" ]; then # Escape clause for wusses. return elif [ ! -e "$Cookies" ]; then echo "File does not exist. Try again." # Keep em going . . . else CookiesON=" --load-cookies $Cookies" # File is good -- use it! return fi done } run_func() { if [ -z "$OPTARG" ]; then # Test to see if we used the in-line option or the query one. if [ ! -d "$savePath" ]; then # If directory doesn't exist . . . echo "$savePath does not appear to exist." echo "Please supply path and filename of saved wget commands:" read newFile until [ -f "$newFile" ]; do # Keep going till we get something. echo "Sorry, that file does not exist. Please try again." # Try really hard to get something. read newFile done # ----------------------------------------------------------------------- # if [ -z ( grep wget ${newfile} ) ]; then # Assume they haven't got the right file and bail out. # echo "Sorry, that file does not contain wget commands. Aborting." # exit # fi # # This is bogus code. # It doesn't actually work. # If anyone wants to fix it, feel free! # ----------------------------------------------------------------------- filePath="${newFile}" else echo "Save path is $savePath" echo "Please enter name of the file which you want to use." echo "You have a choice of:" ls $savePath # Give them a choice. read inFile until [ -f "$savePath/$inFile" ]; do # Keep going till #+ we get something. if [ ! -f "${savePath}/${inFile}" ]; then # If file doesn't exist. echo "Sorry, that file does not exist. Please choose from:" ls $savePath # If a mistake is made. Appendix A. Contributed Scripts 648
- 655. Advanced Bash-Scripting Guide read inFile fi done filePath="${savePath}/${inFile}" # Make one variable . . . fi else filePath="${savePath}/${OPTARG}" # Which can be many things . . . fi if [ ! -f "$filePath" ]; then # If a bogus file got through. echo "You did not specify a suitable file." echo "Run this script with the -${save} option first." echo "Aborting." exit $E_NO_SAVEFILE fi echo "Using: $filePath" while read; do eval $REPLY echo "Completed: $REPLY" done < $filePath # Feed the actual file we are using into a 'while' loop. exit } # Fish out any options we are using for the script. # This is based on the demo in "Learning The Bash Shell" (O'Reilly). while getopts ":$save$cook$help$list$runn:$inpu$wopt" opt do case $opt in $save) save_func;; # Save some wgetter sessions for later. $cook) cookie_func;; # Change cookie file. $help) usage;; # Get help. $list) list_func;; # Allow wget to use a list of URLs. $runn) run_func;; # Useful if you are calling wgetter from, #+ for example, a cron script. $inpu) run_func;; # When you don't know what your files are named. $wopt) wopts;; # Pass options directly to wget. ?) echo "Not a valid option." echo "Use -${wopt} to pass options directly to wget," echo "or -${help} for help";; # Catch anything else. esac done shift $((OPTIND - 1)) # Do funky magic stuff with $#. if [ -z "$1" ] && [ -z "$lister" ]; then # We should be left with at least one URL #+ on the command-line, unless a list is #+ being used -- catch empty CL's. echo "No URL's given! You must enter them on the same line as wgetter2." echo "E.g., wgetter2 http://somesite http://anothersite." echo "Use $help option for more information." exit $E_NO_URLS # Bail out, with appropriate error code. fi URLS=" $@" # Use this so that URL list can be changed if we stay in the option loop. while [ 1 ]; do # This is where we ask for the most used options. # (Mostly unchanged from version 1 of wgetter) Appendix A. Contributed Scripts 649
- 656. Advanced Bash-Scripting Guide if [ -z $curDepth ]; then Current="" else Current=" Current value is $curDepth" fi echo "How deep should I go? (integer: Default is $depthDefault.$Current)" read Depth # Recursion -- how far should we go? inputB="" # Reset this to blank on each pass of the loop. echo "Enter the name of the referring page (default is none)." read inputB # Need this for some sites. echo "Do you want to have the output logged to the terminal" echo "(y/n, default is yes)?" read noHide # Otherwise wget will just log it to a file. case $noHide in # Now you see me, now you don't. y|Y ) hide="";; n|N ) hide=" -b";; * ) hide="";; esac if [ -z ${Depth} ]; then # User accepted either default or current depth, #+ in which case Depth is now empty. if [ -z ${curDepth} ]; then # See if a depth was set on a previous iteration. Depth="$depthDefault" # Set the default recursion depth if nothing #+ else to use. else Depth="$curDepth" # Otherwise, set the one we used before. fi fi Recurse=" -l $Depth" # Set how deep we want to go. curDepth=$Depth # Remember setting for next time. if [ ! -z $inputB ]; then RefA=" --referer=$inputB" # Option to use referring page. fi WGETTER="${CommandA}${pattern}${hide}${RefA}${Recurse} ${CookiesON}${lister}${Woptions}${URLS}" # Just string the whole lot together . . . # NB: no embedded spaces. # They are in the individual elements so that if any are empty, #+ we don't get an extra space. if [ -z "${CookiesON}" ] && [ "$cFlag" = "1" ] ; then echo "Warning -- can't find cookie file" # This should be changed, #+ in case the user has opted to not use cookies. fi if [ "$Flag" = "S" ]; then echo "$WGETTER" >> $savePath/wget-${today} # Create a unique filename for today, or append to it if it exists. echo "$inputB" >> $savePath/site-list-${today} # Make a list, so it's easy to refer back to, #+ since the whole command is a bit confusing to look at. echo "Command saved to the file $savePath/wget-${today}" # Tell the user. echo "Referring page URL saved to the file$ savePath/site-list-${today}" Appendix A. Contributed Scripts 650
- 657. Advanced Bash-Scripting Guide # Tell the user. Saver=" with save option" # Stick this somewhere, so it appears in the loop if set. else echo "*****************" echo "*****Getting*****" echo "*****************" echo "" echo "$WGETTER" echo "" echo "*****************" eval "$WGETTER" fi echo "" echo "Starting over$Saver." echo "If you want to stop, press q." echo "Otherwise, enter some URL's:" # Let them go again. Tell about save option being set. read case $REPLY in # Need to change this to a 'trap' clause. q|Q ) exit $E_USER_EXIT;; # Exercise for the reader? * ) URLS=" $REPLY";; esac echo "" done exit 0 Example A-31. A podcasting script #!/bin/bash # bashpodder.sh: # By Linc 10/1/2004 # Find the latest script at #+ http://linc.homeunix.org:8080/scripts/bashpodder # Last revision 12/14/2004 - Many Contributors! # If you use this and have made improvements or have comments #+ drop me an email at linc dot fessenden at gmail dot com # I'd appreciate it! # ==> ABS Guide extra comments. # ==> Author of this script has kindly granted permission # ==>+ for inclusion in ABS Guide. # ==> ################################################################ # # ==> What is "podcasting"? # ==> It's broadcasting "radio shows" over the Internet. # ==> These shows can be played on iPods and other music file players. # ==> This script makes it possible. # ==> See documentation at the script author's site, above. Appendix A. Contributed Scripts 651
- 658. Advanced Bash-Scripting Guide # ==> ################################################################ # Make script crontab friendly: cd $(dirname $0) # ==> Change to directory where this script lives. # datadir is the directory you want podcasts saved to: datadir=$(date +%Y-%m-%d) # ==> Will create a date-labeled directory, named: YYYY-MM-DD # Check for and create datadir if necessary: if test ! -d $datadir then mkdir $datadir fi # Delete any temp file: rm -f temp.log # Read the bp.conf file and wget any url not already #+ in the podcast.log file: while read podcast do # ==> Main action follows. file=$(wget -q $podcast -O - | tr 'r' 'n' | tr ' " | sed -n 's/.*url="([^"]*)".*/1/p') for url in $file do echo $url >> temp.log if ! grep "$url" podcast.log > /dev/null then wget -q -P $datadir "$url" fi done done < bp.conf # Move dynamically created log file to permanent log file: cat podcast.log >> temp.log sort temp.log | uniq > podcast.log rm temp.log # Create an m3u playlist: ls $datadir | grep -v m3u > $datadir/podcast.m3u exit 0 ################################################# For a different scripting approach to Podcasting, see Phil Salkie's article, "Internet Radio to Podcast with Shell Tools" in the September, 2005 issue of LINUX JOURNAL, http://www.linuxjournal.com/article/8171 ################################################# Example A-32. Nightly backup to a firewire HD #!/bin/bash # nightly-backup.sh # http://www.richardneill.org/source.php#nightly-backup-rsync # Copyright (c) 2005 Richard Neill <backup@richardneill.org>. Appendix A. Contributed Scripts 652
- 659. Advanced Bash-Scripting Guide # This is Free Software licensed under the GNU GPL. # ==> Included in ABS Guide with script author's kind permission. # ==> (Thanks!) # This does a backup from the host computer to a locally connected #+ firewire HDD using rsync and ssh. # It then rotates the backups. # Run it via cron every night at 5am. # This only backs up the home directory. # If ownerships (other than the user's) should be preserved, #+ then run the rsync process as root (and re-instate the -o). # We save every day for 7 days, then every week for 4 weeks, #+ then every month for 3 months. # See: http://www.mikerubel.org/computers/rsync_snapshots/ #+ for more explanation of the theory. # Save as: $HOME/bin/nightly-backup_firewire-hdd.sh # Known bugs: # ---------- # i) Ideally, we want to exclude ~/.tmp and the browser caches. # ii) If the user is sitting at the computer at 5am, #+ and files are modified while the rsync is occurring, #+ then the BACKUP_JUSTINCASE branch gets triggered. # To some extent, this is a #+ feature, but it also causes a "disk-space leak". ##### BEGIN CONFIGURATION SECTION ############################################ LOCAL_USER=rjn # User whose home directory should be backed up. MOUNT_POINT=/backup # Mountpoint of backup drive. # NO trailing slash! # This must be unique (eg using a udev symlink) SOURCE_DIR=/home/$LOCAL_USER # NO trailing slash - it DOES matter to rsync. BACKUP_DEST_DIR=$MOUNT_POINT/backup/`hostname -s`.${LOCAL_USER}.nightly_backup DRY_RUN=false #If true, invoke rsync with -n, to do a dry run. # Comment out or set to false for normal use. VERBOSE=false # If true, make rsync verbose. # Comment out or set to false otherwise. COMPRESS=false # If true, compress. # Good for internet, bad on LAN. # Comment out or set to false otherwise. ### Exit Codes ### E_VARS_NOT_SET=64 E_COMMANDLINE=65 E_MOUNT_FAIL=70 E_NOSOURCEDIR=71 E_UNMOUNTED=72 E_BACKUP=73 ##### END CONFIGURATION SECTION ############################################## # Check that all the important variables have been set: if [ -z "$LOCAL_USER" ] || [ -z "$SOURCE_DIR" ] || [ -z "$MOUNT_POINT" ] || [ -z "$BACKUP_DEST_DIR" ] Appendix A. Contributed Scripts 653
- 660. Advanced Bash-Scripting Guide then echo 'One of the variables is not set! Edit the file: $0. BACKUP FAILED.' exit $E_VARS_NOT_SET fi if [ "$#" != 0 ] # If command-line param(s) . . . then # Here document(ation). cat <<-ENDOFTEXT Automatic Nightly backup run from cron. Read the source for more details: $0 The backup directory is $BACKUP_DEST_DIR . It will be created if necessary; initialisation is no longer required. WARNING: Contents of $BACKUP_DEST_DIR are rotated. Directories named 'backup.$i' will eventually be DELETED. We keep backups from every day for 7 days (1-8), then every week for 4 weeks (9-12), then every month for 3 months (13-15). You may wish to add this to your crontab using 'crontab -e' # Back up files: $SOURCE_DIR to $BACKUP_DEST_DIR #+ every night at 3:15 am 15 03 * * * /home/$LOCAL_USER/bin/nightly-backup_firewire-hdd.sh Don't forget to verify the backups are working, especially if you don't read cron's mail!" ENDOFTEXT exit $E_COMMANDLINE fi # Parse the options. # ================== if [ "$DRY_RUN" == "true" ]; then DRY_RUN="-n" echo "WARNING:" echo "THIS IS A 'DRY RUN'!" echo "No data will actually be transferred!" else DRY_RUN="" fi if [ "$VERBOSE" == "true" ]; then VERBOSE="-v" else VERBOSE="" fi if [ "$COMPRESS" == "true" ]; then COMPRESS="-z" else COMPRESS="" fi # Every week (actually of 8 days) and every month, #+ extra backups are preserved. DAY_OF_MONTH=`date +%d` # Day of month (01..31). if [ $DAY_OF_MONTH = 01 ]; then # First of month. MONTHSTART=true elif [ $DAY_OF_MONTH = 08 Appendix A. Contributed Scripts 654
- 661. Advanced Bash-Scripting Guide -o $DAY_OF_MONTH = 16 -o $DAY_OF_MONTH = 24 ]; then # Day 8,16,24 (use 8, not 7 to better handle 31-day months) WEEKSTART=true fi # Check that the HDD is mounted. # At least, check that *something* is mounted here! # We can use something unique to the device, rather than just guessing #+ the scsi-id by having an appropriate udev rule in #+ /etc/udev/rules.d/10-rules.local #+ and by putting a relevant entry in /etc/fstab. # Eg: this udev rule: # BUS="scsi", KERNEL="sd*", SYSFS{vendor}="WDC WD16", # SYSFS{model}="00JB-00GVA0 ", NAME="%k", SYMLINK="lacie_1394d%n" if mount | grep $MOUNT_POINT >/dev/null; then echo "Mount point $MOUNT_POINT is indeed mounted. OK" else echo -n "Attempting to mount $MOUNT_POINT..." # If it isn't mounted, try to mount it. sudo mount $MOUNT_POINT 2>/dev/null if mount | grep $MOUNT_POINT >/dev/null; then UNMOUNT_LATER=TRUE echo "OK" # Note: Ensure that this is also unmounted #+ if we exit prematurely with failure. else echo "FAILED" echo -e "Nothing is mounted at $MOUNT_POINT. BACKUP FAILED!" exit $E_MOUNT_FAIL fi fi # Check that source dir exists and is readable. if [ ! -r $SOURCE_DIR ] ; then echo "$SOURCE_DIR does not exist, or cannot be read. BACKUP FAILED." exit $E_NOSOURCEDIR fi # Check that the backup directory structure is as it should be. # If not, create it. # Create the subdirectories. # Note that backup.0 will be created as needed by rsync. for ((i=1;i<=15;i++)); do if [ ! -d $BACKUP_DEST_DIR/backup.$i ]; then if /bin/mkdir -p $BACKUP_DEST_DIR/backup.$i ; then # ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ No [ ] test brackets. Why? echo "Warning: directory $BACKUP_DEST_DIR/backup.$i is missing," echo "or was not initialised. (Re-)creating it." else echo "ERROR: directory $BACKUP_DEST_DIR/backup.$i" echo "is missing and could not be created." if [ "$UNMOUNT_LATER" == "TRUE" ]; then # Before we exit, unmount the mount point if necessary. cd Appendix A. Contributed Scripts 655
- 662. Advanced Bash-Scripting Guide sudo umount $MOUNT_POINT && echo "Unmounted $MOUNT_POINT again. Giving up." fi exit $E_UNMOUNTED fi fi done # Set the permission to 700 for security #+ on an otherwise permissive multi-user system. if ! /bin/chmod 700 $BACKUP_DEST_DIR ; then echo "ERROR: Could not set permissions on $BACKUP_DEST_DIR to 700." if [ "$UNMOUNT_LATER" == "TRUE" ]; then # Before we exit, unmount the mount point if necessary. cd ; sudo umount $MOUNT_POINT && echo "Unmounted $MOUNT_POINT again. Giving up." fi exit $E_UNMOUNTED fi # Create the symlink: current -> backup.1 if required. # A failure here is not critical. cd $BACKUP_DEST_DIR if [ ! -h current ] ; then if ! /bin/ln -s backup.1 current ; then echo "WARNING: could not create symlink current -> backup.1" fi fi # Now, do the rsync. echo "Now doing backup with rsync..." echo "Source dir: $SOURCE_DIR" echo -e "Backup destination dir: $BACKUP_DEST_DIRn" /usr/bin/rsync $DRY_RUN $VERBOSE -a -S --delete --modify-window=60 --link-dest=../backup.1 $SOURCE_DIR $BACKUP_DEST_DIR/backup.0/ # Only warn, rather than exit if the rsync failed, #+ since it may only be a minor problem. # E.g., if one file is not readable, rsync will fail. # This shouldn't prevent the rotation. # Not using, e.g., `date +%a` since these directories #+ are just full of links and don't consume *that much* space. if [ $? != 0 ]; then BACKUP_JUSTINCASE=backup.`date +%F_%T`.justincase echo "WARNING: the rsync process did not entirely succeed." echo "Something might be wrong." echo "Saving an extra copy at: $BACKUP_JUSTINCASE" echo "WARNING: if this occurs regularly, a LOT of space will be consumed," echo "even though these are just hard-links!" fi # Save a readme in the backup parent directory. # Save another one in the recent subdirectory. echo "Backup of $SOURCE_DIR on `hostname` was last run on `date`" > $BACKUP_DEST_DIR/README.txt Appendix A. Contributed Scripts 656
- 663. Advanced Bash-Scripting Guide echo "This backup of $SOURCE_DIR on `hostname` was created on `date`" > $BACKUP_DEST_DIR/backup.0/README.txt # If we are not in a dry run, rotate the backups. [ -z "$DRY_RUN" ] && # Check how full the backup disk is. # Warn if 90%. if 98% or more, we'll probably fail, so give up. # (Note: df can output to more than one line.) # We test this here, rather than before #+ so that rsync may possibly have a chance. DISK_FULL_PERCENT=`/bin/df $BACKUP_DEST_DIR | tr "n" ' ' | awk '{print $12}' | grep -oE [0-9]+ ` echo "Disk space check on backup partition $MOUNT_POINT $DISK_FULL_PERCENT% full." if [ $DISK_FULL_PERCENT -gt 90 ]; then echo "Warning: Disk is greater than 90% full." fi if [ $DISK_FULL_PERCENT -gt 98 ]; then echo "Error: Disk is full! Giving up." if [ "$UNMOUNT_LATER" == "TRUE" ]; then # Before we exit, unmount the mount point if necessary. cd; sudo umount $MOUNT_POINT && echo "Unmounted $MOUNT_POINT again. Giving up." fi exit $E_UNMOUNTED fi # Create an extra backup. # If this copy fails, give up. if [ -n "$BACKUP_JUSTINCASE" ]; then if ! /bin/cp -al $BACKUP_DEST_DIR/backup.0 $BACKUP_DEST_DIR/$BACKUP_JUSTINCASE then echo "ERROR: Failed to create extra copy $BACKUP_DEST_DIR/$BACKUP_JUSTINCASE" if [ "$UNMOUNT_LATER" == "TRUE" ]; then # Before we exit, unmount the mount point if necessary. cd ;sudo umount $MOUNT_POINT && echo "Unmounted $MOUNT_POINT again. Giving up." fi exit $E_UNMOUNTED fi fi # At start of month, rotate the oldest 8. if [ "$MONTHSTART" == "true" ]; then echo -e "nStart of month. Removing oldest backup: $BACKUP_DEST_DIR/backup.15" && /bin/rm -rf $BACKUP_DEST_DIR/backup.15 && echo "Rotating monthly,weekly backups: $BACKUP_DEST_DIR/backup.[8-14] -> $BACKUP_DEST_DIR/backup.[9-15]" && /bin/mv $BACKUP_DEST_DIR/backup.14 $BACKUP_DEST_DIR/backup.15 && /bin/mv $BACKUP_DEST_DIR/backup.13 $BACKUP_DEST_DIR/backup.14 && /bin/mv $BACKUP_DEST_DIR/backup.12 $BACKUP_DEST_DIR/backup.13 && /bin/mv $BACKUP_DEST_DIR/backup.11 $BACKUP_DEST_DIR/backup.12 && /bin/mv $BACKUP_DEST_DIR/backup.10 $BACKUP_DEST_DIR/backup.11 && /bin/mv $BACKUP_DEST_DIR/backup.9 $BACKUP_DEST_DIR/backup.10 && /bin/mv $BACKUP_DEST_DIR/backup.8 $BACKUP_DEST_DIR/backup.9 Appendix A. Contributed Scripts 657
- 664. Advanced Bash-Scripting Guide # At start of week, rotate the second-oldest 4. elif [ "$WEEKSTART" == "true" ]; then echo -e "nStart of week. Removing oldest weekly backup: $BACKUP_DEST_DIR/backup.12" && /bin/rm -rf $BACKUP_DEST_DIR/backup.12 && echo "Rotating weekly backups: $BACKUP_DEST_DIR/backup.[8-11] -> $BACKUP_DEST_DIR/backup.[9-12]" && /bin/mv $BACKUP_DEST_DIR/backup.11 $BACKUP_DEST_DIR/backup.12 && /bin/mv $BACKUP_DEST_DIR/backup.10 $BACKUP_DEST_DIR/backup.11 && /bin/mv $BACKUP_DEST_DIR/backup.9 $BACKUP_DEST_DIR/backup.10 && /bin/mv $BACKUP_DEST_DIR/backup.8 $BACKUP_DEST_DIR/backup.9 else echo -e "nRemoving oldest daily backup: $BACKUP_DEST_DIR/backup.8" && /bin/rm -rf $BACKUP_DEST_DIR/backup.8 fi && # Every day, rotate the newest 8. echo "Rotating daily backups: $BACKUP_DEST_DIR/backup.[1-7] -> $BACKUP_DEST_DIR/backup.[2-8]" && /bin/mv $BACKUP_DEST_DIR/backup.7 $BACKUP_DEST_DIR/backup.8 && /bin/mv $BACKUP_DEST_DIR/backup.6 $BACKUP_DEST_DIR/backup.7 && /bin/mv $BACKUP_DEST_DIR/backup.5 $BACKUP_DEST_DIR/backup.6 && /bin/mv $BACKUP_DEST_DIR/backup.4 $BACKUP_DEST_DIR/backup.5 && /bin/mv $BACKUP_DEST_DIR/backup.3 $BACKUP_DEST_DIR/backup.4 && /bin/mv $BACKUP_DEST_DIR/backup.2 $BACKUP_DEST_DIR/backup.3 && /bin/mv $BACKUP_DEST_DIR/backup.1 $BACKUP_DEST_DIR/backup.2 && /bin/mv $BACKUP_DEST_DIR/backup.0 $BACKUP_DEST_DIR/backup.1 && SUCCESS=true if [ "$UNMOUNT_LATER" == "TRUE" ]; then # Unmount the mount point if it wasn't mounted to begin with. cd ; sudo umount $MOUNT_POINT && echo "Unmounted $MOUNT_POINT again." fi if [ "$SUCCESS" == "true" ]; then echo 'SUCCESS!' exit 0 fi # Should have already exited if backup worked. echo 'BACKUP FAILED! Is this just a dry run? Is the disk full?) ' exit $E_BACKUP Example A-33. An expanded cd command ########################################################################### # # cdll # by Phil Braham # # ############################################ # Latest version of this script available from # http://freshmeat.net/projects/cd/ # ############################################ # Appendix A. Contributed Scripts 658
- 665. Advanced Bash-Scripting Guide # .cd_new # # An enhancement of the Unix cd command # # There are unlimited stack entries and special entries. The stack # entries keep the last cd_maxhistory # directories that have been used. The special entries can be # assigned to commonly used directories. # # The special entries may be pre-assigned by setting the environment # variables CDSn or by using the -u or -U command. # # The following is a suggestion for the .profile file: # # . cdll # Set up the cd command # alias cd='cd_new' # Replace the cd command # cd -U # Upload pre-assigned entries for # #+ the stack and special entries # cd -D # Set non-default mode # alias @="cd_new @" # Allow @ to be used to get history # # For help type: # # cd -h or # cd -H # # ########################################################################### # # Version 1.2.1 # # Written by Phil Braham - Realtime Software Pty Ltd # (realtime@mpx.com.au) # Please send any suggestions or enhancements to the author (also at # phil@braham.net) # ############################################################################ cd_hm () { ${PRINTF} "%s" "cd [dir] [0-9] [@[s|h] [-g [<dir>]] [-d] [-D] [-r<n>] [dir|0-9] [-R<n>] [<dir>|0-9] [-s<n>] [-S<n>] [-u] [-U] [-f] [-F] [-h] [-H] [-v] <dir> Go to directory 0-n Go to previous directory (0 is previous, 1 is last but 1 etc) n is up to max history (default is 50) @ List history and special entries @h List history entries @s List special entries -g [<dir>] Go to literal name (bypass special names) This is to allow access to dirs called '0','1','-h' etc -d Change default action - verbose. (See note) -D Change default action - silent. (See note) -s<n> Go to the special entry <n>* -S<n> Go to the special entry <n> and replace it with the current dir* -r<n> [<dir>] Go to directory <dir> and then put it on special entry <n>* -R<n> [<dir>] Go to directory <dir> and put current dir on special entry <n>* -a<n> Alternative suggested directory. See note below. -f [<file>] File entries to <file>. Appendix A. Contributed Scripts 659
- 666. Advanced Bash-Scripting Guide -u [<file>] Update entries from <file>. If no filename supplied then default file (${CDPath}${2:-"$CDFile"}) is used -F and -U are silent versions -v Print version number -h Help -H Detailed help *The special entries (0 - 9) are held until log off, replaced by another entry or updated with the -u command Alternative suggested directories: If a directory is not found then CD will suggest any possibilities. These are directories starting with the same letters and if any are found they are listed prefixed with -a<n> where <n> is a number. It's possible to go to the directory by entering cd -a<n> on the command line. The directory for -r<n> or -R<n> may be a number. For example: $ cd -r3 4 Go to history entry 4 and put it on special entry 3 $ cd -R3 4 Put current dir on the special entry 3 and go to history entry 4 $ cd -s3 Go to special entry 3 Note that commands R,r,S and s may be used without a number and refer to 0: $ cd -s Go to special entry 0 $ cd -S Go to special entry 0 and make special entry 0 current dir $ cd -r 1 Go to history entry 1 and put it on special entry 0 $ cd -r Go to history entry 0 and put it on special entry 0 " if ${TEST} "$CD_MODE" = "PREV" then ${PRINTF} "$cd_mnset" else ${PRINTF} "$cd_mset" fi } cd_Hm () { cd_hm ${PRINTF} "%s" " The previous directories (0-$cd_maxhistory) are stored in the environment variables CD[0] - CD[$cd_maxhistory] Similarly the special directories S0 - $cd_maxspecial are in the environment variable CDS[0] - CDS[$cd_maxspecial] and may be accessed from the command line The default pathname for the -f and -u commands is $CDPath The default filename for the -f and -u commands is $CDFile Set the following environment variables: CDL_PROMPTLEN - Set to the length of prompt you require. Prompt string is set to the right characters of the current directory. If not set then prompt is left unchanged CDL_PROMPT_PRE - Set to the string to prefix the prompt. Default is: Appendix A. Contributed Scripts 660
- 667. Advanced Bash-Scripting Guide non-root: "[e[01;34m]" (sets colour to blue). root: "[e[01;31m]" (sets colour to red). CDL_PROMPT_POST - Set to the string to suffix the prompt. Default is: non-root: "[e[00m]$" (resets colour and displays $). root: "[e[00m]#" (resets colour and displays #). CDPath - Set the default path for the -f & -u options. Default is home directory CDFile - Set the default filename for the -f & -u options. Default is cdfile " cd_version } cd_version () { printf "Version: ${VERSION_MAJOR}.${VERSION_MINOR} Date: ${VERSION_DATE}n" } # # Truncate right. # # params: # p1 - string # p2 - length to truncate to # # returns string in tcd # cd_right_trunc () { local tlen=${2} local plen=${#1} local str="${1}" local diff local filler="<--" if ${TEST} ${plen} -le ${tlen} then tcd="${str}" else let diff=${plen}-${tlen} elen=3 if ${TEST} ${diff} -le 2 then let elen=${diff} fi tlen=-${tlen} let tlen=${tlen}+${elen} tcd=${filler:0:elen}${str:tlen} fi } # # Three versions of do history: # cd_dohistory - packs history and specials side by side # cd_dohistoryH - Shows only hstory # cd_dohistoryS - Shows only specials # cd_dohistory () Appendix A. Contributed Scripts 661
- 668. Advanced Bash-Scripting Guide { cd_getrc ${PRINTF} "History:n" local -i count=${cd_histcount} while ${TEST} ${count} -ge 0 do cd_right_trunc "${CD[count]}" ${cd_lchar} ${PRINTF} "%2d %-${cd_lchar}.${cd_lchar}s " ${count} "${tcd}" cd_right_trunc "${CDS[count]}" ${cd_rchar} ${PRINTF} "S%d %-${cd_rchar}.${cd_rchar}sn" ${count} "${tcd}" count=${count}-1 done } cd_dohistoryH () { cd_getrc ${PRINTF} "History:n" local -i count=${cd_maxhistory} while ${TEST} ${count} -ge 0 do ${PRINTF} "${count} %-${cd_flchar}.${cd_flchar}sn" ${CD[$count]} count=${count}-1 done } cd_dohistoryS () { cd_getrc ${PRINTF} "Specials:n" local -i count=${cd_maxspecial} while ${TEST} ${count} -ge 0 do ${PRINTF} "S${count} %-${cd_flchar}.${cd_flchar}sn" ${CDS[$count]} count=${count}-1 done } cd_getrc () { cd_flchar=$(stty -a | awk -F ; '/rows/ { print $2 $3 }' | awk -F '{ print $4 }') if ${TEST} ${cd_flchar} -ne 0 then cd_lchar=${cd_flchar}/2-5 cd_rchar=${cd_flchar}/2-5 cd_flchar=${cd_flchar}-5 else cd_flchar=${FLCHAR:=75} # cd_flchar is used for for the @s & @h history cd_lchar=${LCHAR:=35} cd_rchar=${RCHAR:=35} fi } cd_doselection () { local -i nm=0 cd_doflag="TRUE" if ${TEST} "${CD_MODE}" = "PREV" then Appendix A. Contributed Scripts 662
- 669. Advanced Bash-Scripting Guide if ${TEST} -z "$cd_npwd" then cd_npwd=0 fi fi tm=$(echo "${cd_npwd}" | cut -b 1) if ${TEST} "${tm}" = "-" then pm=$(echo "${cd_npwd}" | cut -b 2) nm=$(echo "${cd_npwd}" | cut -d $pm -f2) case "${pm}" in a) cd_npwd=${cd_sugg[$nm]} ;; s) cd_npwd="${CDS[$nm]}" ;; S) cd_npwd="${CDS[$nm]}" ; CDS[$nm]=`pwd` ;; r) cd_npwd="$2" ; cd_specDir=$nm ; cd_doselection "$1" "$2";; R) cd_npwd="$2" ; CDS[$nm]=`pwd` ; cd_doselection "$1" "$2";; esac fi if ${TEST} "${cd_npwd}" != "." -a "${cd_npwd}" != ".." -a "${cd_npwd}" -le ${cd_maxhistory} >>/dev/null 2>&1 then cd_npwd=${CD[$cd_npwd]} else case "$cd_npwd" in @) cd_dohistory ; cd_doflag="FALSE" ;; @h) cd_dohistoryH ; cd_doflag="FALSE" ;; @s) cd_dohistoryS ; cd_doflag="FALSE" ;; -h) cd_hm ; cd_doflag="FALSE" ;; -H) cd_Hm ; cd_doflag="FALSE" ;; -f) cd_fsave "SHOW" $2 ; cd_doflag="FALSE" ;; -u) cd_upload "SHOW" $2 ; cd_doflag="FALSE" ;; -F) cd_fsave "NOSHOW" $2 ; cd_doflag="FALSE" ;; -U) cd_upload "NOSHOW" $2 ; cd_doflag="FALSE" ;; -g) cd_npwd="$2" ;; -d) cd_chdefm 1; cd_doflag="FALSE" ;; -D) cd_chdefm 0; cd_doflag="FALSE" ;; -r) cd_npwd="$2" ; cd_specDir=0 ; cd_doselection "$1" "$2";; -R) cd_npwd="$2" ; CDS[0]=`pwd` ; cd_doselection "$1" "$2";; -s) cd_npwd="${CDS[0]}" ;; -S) cd_npwd="${CDS[0]}" ; CDS[0]=`pwd` ;; -v) cd_version ; cd_doflag="FALSE";; esac fi } cd_chdefm () { if ${TEST} "${CD_MODE}" = "PREV" then CD_MODE="" if ${TEST} $1 -eq 1 then ${PRINTF} "${cd_mset}" fi else CD_MODE="PREV" if ${TEST} $1 -eq 1 then ${PRINTF} "${cd_mnset}" fi fi Appendix A. Contributed Scripts 663
- 670. Advanced Bash-Scripting Guide } cd_fsave () { local sfile=${CDPath}${2:-"$CDFile"} if ${TEST} "$1" = "SHOW" then ${PRINTF} "Saved to %sn" $sfile fi ${RM} -f ${sfile} local -i count=0 while ${TEST} ${count} -le ${cd_maxhistory} do echo "CD[$count]="${CD[$count]}"" >> ${sfile} count=${count}+1 done count=0 while ${TEST} ${count} -le ${cd_maxspecial} do echo "CDS[$count]="${CDS[$count]}"" >> ${sfile} count=${count}+1 done } cd_upload () { local sfile=${CDPath}${2:-"$CDFile"} if ${TEST} "${1}" = "SHOW" then ${PRINTF} "Loading from %sn" ${sfile} fi . ${sfile} } cd_new () { local -i count local -i choose=0 cd_npwd="${1}" cd_specDir=-1 cd_doselection "${1}" "${2}" if ${TEST} ${cd_doflag} = "TRUE" then if ${TEST} "${CD[0]}" != "`pwd`" then count=$cd_maxhistory while ${TEST} $count -gt 0 do CD[$count]=${CD[$count-1]} count=${count}-1 done CD[0]=`pwd` fi command cd "${cd_npwd}" 2>/dev/null if ${TEST} $? -eq 1 then ${PRINTF} "Unknown dir: %sn" "${cd_npwd}" local -i ftflag=0 for i in "${cd_npwd}"* do Appendix A. Contributed Scripts 664
- 671. Advanced Bash-Scripting Guide if ${TEST} -d "${i}" then if ${TEST} ${ftflag} -eq 0 then ${PRINTF} "Suggest:n" ftflag=1 fi ${PRINTF} "t-a${choose} %sn" "$i" cd_sugg[$choose]="${i}" choose=${choose}+1 fi done fi fi if ${TEST} ${cd_specDir} -ne -1 then CDS[${cd_specDir}]=`pwd` fi if ${TEST} ! -z "${CDL_PROMPTLEN}" then cd_right_trunc "${PWD}" ${CDL_PROMPTLEN} cd_rp=${CDL_PROMPT_PRE}${tcd}${CDL_PROMPT_POST} export PS1="$(echo -ne ${cd_rp})" fi } ######################################################################### # # # Initialisation here # # # ######################################################################### # VERSION_MAJOR="1" VERSION_MINOR="2.1" VERSION_DATE="24-MAY-2003" # alias cd=cd_new # # Set up commands RM=/bin/rm TEST=test PRINTF=printf # Use builtin printf ######################################################################### # # # Change this to modify the default pre- and post prompt strings. # # These only come into effect if CDL_PROMPTLEN is set. # # # ######################################################################### if ${TEST} ${EUID} -eq 0 then # CDL_PROMPT_PRE=${CDL_PROMPT_PRE:="$HOSTNAME@"} CDL_PROMPT_PRE=${CDL_PROMPT_PRE:="[e[01;31m]"} # Root is in red CDL_PROMPT_POST=${CDL_PROMPT_POST:="[e[00m]#"} else CDL_PROMPT_PRE=${CDL_PROMPT_PRE:="[e[01;34m]"} # Users in blue CDL_PROMPT_POST=${CDL_PROMPT_POST:="[e[00m]$"} fi ######################################################################### # # cd_maxhistory defines the max number of history entries allowed. Appendix A. Contributed Scripts 665
- 672. Advanced Bash-Scripting Guide typeset -i cd_maxhistory=50 ######################################################################### # # cd_maxspecial defines the number of special entries. typeset -i cd_maxspecial=9 # # ######################################################################### # # cd_histcount defines the number of entries displayed in #+ the history command. typeset -i cd_histcount=9 # ######################################################################### export CDPath=${HOME}/ # Change these to use a different # #+ default path and filename # export CDFile=${CDFILE:=cdfile} # for the -u and -f commands # # ######################################################################### # typeset -i cd_lchar cd_rchar cd_flchar # This is the number of chars to allow for the # cd_flchar=${FLCHAR:=75} #+ cd_flchar is used for for the @s & @h history# typeset -ax CD CDS # cd_mset="ntDefault mode is now set - entering cd with no parameters has the default actionntUse cd -d or -D for cd to go to previous directory with no parametersn" cd_mnset="ntNon-default mode is now set - entering cd with no parameters is the same as entering cd 0ntUse cd -d or -D to change default cd actionn" # ==================================================================== # : <<DOCUMENTATION Written by Phil Braham. Realtime Software Pty Ltd. Released under GNU license. Free to use. Please pass any modifications or comments to the author Phil Braham: realtime@mpx.com.au ======================================================================= cdll is a replacement for cd and incorporates similar functionality to the bash pushd and popd commands but is independent of them. This version of cdll has been tested on Linux using Bash. It will work on most Linux versions but will probably not work on other shells without modification. Introduction ============ cdll allows easy moving about between directories. When changing to a new directory the current one is automatically put onto a stack. By default 50 entries are kept, but this is configurable. Special directories can be kept for easy access - by default up to 10, but this is configurable. The Appendix A. Contributed Scripts 666
- 673. Advanced Bash-Scripting Guide most recent stack entries and the special entries can be easily viewed. The directory stack and special entries can be saved to, and loaded from, a file. This allows them to be set up on login, saved before logging out or changed when moving project to project. In addition, cdll provides a flexible command prompt facility that allows, for example, a directory name in colour that is truncated from the left if it gets too long. Setting up cdll =============== Copy cdll to either your local home directory or a central directory such as /usr/bin (this will require root access). Copy the file cdfile to your home directory. It will require read and write access. This a default file that contains a directory stack and special entries. To replace the cd command you must add commands to your login script. The login script is one or more of: /etc/profile ~/.bash_profile ~/.bash_login ~/.profile ~/.bashrc /etc/bash.bashrc.local To setup your login, ~/.bashrc is recommended, for global (and root) setup add the commands to /etc/bash.bashrc.local To set up on login, add the command: . <dir>/cdll For example if cdll is in your local home directory: . ~/cdll If in /usr/bin then: . /usr/bin/cdll If you want to use this instead of the buitin cd command then add: alias cd='cd_new' We would also recommend the following commands: alias @='cd_new @' cd -U cd -D If you want to use cdll's prompt facilty then add the following: CDL_PROMPTLEN=nn Where nn is a number described below. Initially 99 would be suitable number. Thus the script looks something like this: ###################################################################### # CD Setup ###################################################################### CDL_PROMPTLEN=21 # Allow a prompt length of up to 21 characters . /usr/bin/cdll # Initialise cdll alias cd='cd_new' # Replace the built in cd command alias @='cd_new @' # Allow @ at the prompt to display history Appendix A. Contributed Scripts 667
- 674. Advanced Bash-Scripting Guide cd -U # Upload directories cd -D # Set default action to non-posix ###################################################################### The full meaning of these commands will become clear later. There are a couple of caveats. If another program changes the directory without calling cdll, then the directory won't be put on the stack and also if the prompt facility is used then this will not be updated. Two programs that can do this are pushd and popd. To update the prompt and stack simply enter: cd . Note that if the previous entry on the stack is the current directory then the stack is not updated. Usage ===== cd [dir] [0-9] [@[s|h] [-g <dir>] [-d] [-D] [-r<n>] [dir|0-9] [-R<n>] [<dir>|0-9] [-s<n>] [-S<n>] [-u] [-U] [-f] [-F] [-h] [-H] [-v] <dir> Go to directory 0-n Goto previous directory (0 is previous, 1 is last but 1, etc.) n is up to max history (default is 50) @ List history and special entries (Usually available as $ @) @h List history entries @s List special entries -g [<dir>] Go to literal name (bypass special names) This is to allow access to dirs called '0','1','-h' etc -d Change default action - verbose. (See note) -D Change default action - silent. (See note) -s<n> Go to the special entry <n> -S<n> Go to the special entry <n> and replace it with the current dir -r<n> [<dir>] Go to directory <dir> and then put it on special entry <n> -R<n> [<dir>] Go to directory <dir> and put current dir on special entry <n> -a<n> Alternative suggested directory. See note below. -f [<file>] File entries to <file>. -u [<file>] Update entries from <file>. If no filename supplied then default file (~/cdfile) is used -F and -U are silent versions -v Print version number -h Help -H Detailed help Examples ======== These examples assume non-default mode is set (that is, cd with no parameters will go to the most recent stack directory), that aliases have been set up for cd and @ as described above and that cd's prompt facility is active and the prompt length is 21 characters. /home/phil$ @ # List the entries with the @ Appendix A. Contributed Scripts 668
- 675. Advanced Bash-Scripting Guide History: # Output of the @ command ..... # Skipped these entries for brevity 1 /home/phil/ummdev S1 /home/phil/perl # Most recent two history entries 0 /home/phil/perl/eg S0 /home/phil/umm/ummdev # and two special entries are shown /home/phil$ cd /home/phil/utils/Cdll # Now change directories /home/phil/utils/Cdll$ @ # Prompt reflects the directory. History: # New history ..... 1 /home/phil/perl/eg S1 /home/phil/perl # History entry 0 has moved to 1 0 /home/phil S0 /home/phil/umm/ummdev # and the most recent has entered To go to a history entry: /home/phil/utils/Cdll$ cd 1 # Go to history entry 1. /home/phil/perl/eg$ # Current directory is now what was 1 To go to a special entry: /home/phil/perl/eg$ cd -s1 # Go to special entry 1 /home/phil/umm/ummdev$ # Current directory is S1 To go to a directory called, for example, 1: /home/phil$ cd -g 1 # -g ignores the special meaning of 1 /home/phil/1$ To put current directory on the special list as S1: cd -r1 . # OR cd -R1 . # These have the same effect if the directory is #+ . (the current directory) To go to a directory and add it as a special The directory for -r<n> or -R<n> may be a number. For example: $ cd -r3 4 Go to history entry 4 and put it on special entry 3 $ cd -R3 4 Put current dir on the special entry 3 and go to history entry 4 $ cd -s3 Go to special entry 3 Note that commands R,r,S and s may be used without a number and refer to 0: $ cd -s Go to special entry 0 $ cd -S Go to special entry 0 and make special entry 0 current dir $ cd -r 1 Go to history entry 1 and put it on special entry 0 $ cd -r Go to history entry 0 and put it on special entry 0 Appendix A. Contributed Scripts 669
- 676. Advanced Bash-Scripting Guide Alternative suggested directories: If a directory is not found, then CD will suggest any possibilities. These are directories starting with the same letters and if any are found they are listed prefixed with -a<n> where <n> is a number. It's possible to go to the directory by entering cd -a<n> on the command line. Use cd -d or -D to change default cd action. cd -H will show current action. The history entries (0-n) are stored in the environment variables CD[0] - CD[n] Similarly the special directories S0 - 9 are in the environment variable CDS[0] - CDS[9] and may be accessed from the command line, for example: ls -l ${CDS[3]} cat ${CD[8]}/file.txt The default pathname for the -f and -u commands is ~ The default filename for the -f and -u commands is cdfile Configuration ============= The following environment variables can be set: CDL_PROMPTLEN - Set to the length of prompt you require. Prompt string is set to the right characters of the current directory. If not set, then prompt is left unchanged. Note that this is the number of characters that the directory is shortened to, not the total characters in the prompt. CDL_PROMPT_PRE - Set to the string to prefix the prompt. Default is: non-root: "[e[01;34m]" (sets colour to blue). root: "[e[01;31m]" (sets colour to red). CDL_PROMPT_POST - Set to the string to suffix the prompt. Default is: non-root: "[e[00m]$" (resets colour and displays $). root: "[e[00m]#" (resets colour and displays #). Note: CDL_PROMPT_PRE & _POST only t CDPath - Set the default path for the -f & -u options. Default is home directory CDFile - Set the default filename for the -f & -u options. Default is cdfile There are three variables defined in the file cdll which control the number of entries stored or displayed. They are in the section labeled 'Initialisation here' towards the end of the file. cd_maxhistory - The number of history entries stored. Appendix A. Contributed Scripts 670
- 677. Advanced Bash-Scripting Guide Default is 50. cd_maxspecial - The number of special entries allowed. Default is 9. cd_histcount - The number of history and special entries displayed. Default is 9. Note that cd_maxspecial should be >= cd_histcount to avoid displaying special entries that can't be set. Version: 1.2.1 Date: 24-MAY-2003 DOCUMENTATION Example A-34. A soundcard setup script #!/bin/bash # soundcard-on.sh # Script author: Mkarcher # http://www.thinkwiki.org/wiki ... # /Script_for_configuring_the_CS4239_sound_chip_in_PnP_mode # ABS Guide author made minor changes and added comments. # Couldn't contact script author to ask for permission to use, but ... #+ the script was released under the FDL, #+ so its use here should be both legal and ethical. # Sound-via-pnp-script for Thinkpad 600E #+ and possibly other computers with onboard CS4239/CS4610 #+ that do not work with the PCI driver #+ and are not recognized by the PnP code of snd-cs4236. # Also for some 770-series Thinkpads, such as the 770x. # Run as root user, of course. # # These are old and very obsolete laptop computers, #+ but this particular script is very instructive, #+ as it shows how to set up and hack device files. # Search for sound card pnp device: for dev in /sys/bus/pnp/devices/* do grep CSC0100 $dev/id > /dev/null && WSSDEV=$dev grep CSC0110 $dev/id > /dev/null && CTLDEV=$dev done # On 770x: # WSSDEV = /sys/bus/pnp/devices/00:07 # CTLDEV = /sys/bus/pnp/devices/00:06 # These are symbolic links to /sys/devices/pnp0/ ... # Activate devices: # Thinkpad boots with devices disabled unless "fast boot" is turned off #+ (in BIOS). echo activate > $WSSDEV/resources echo activate > $CTLDEV/resources Appendix A. Contributed Scripts 671
- 678. Advanced Bash-Scripting Guide # Parse resource settings. { read # Discard "state = active" (see below). read bla port1 read bla port2 read bla port3 read bla irq read bla dma1 read bla dma2 # The "bla's" are labels in the first field: "io," "state," etc. # These are discarded. # Hack: with PnPBIOS: ports are: port1: WSS, port2: #+ OPL, port3: sb (unneeded) # with ACPI-PnP:ports are: port1: OPL, port2: sb, port3: WSS # (ACPI bios seems to be wrong here, the PnP-card-code in snd-cs4236.c #+ uses the PnPBIOS port order) # Detect port order using the fixed OPL port as reference. if [ ${port2%%-*} = 0x388 ] # ^^^^ Strip out everything following hyphen in port address. # So, if port1 is 0x530-0x537 #+ we're left with 0x530 -- the start address of the port. then # PnPBIOS: usual order port=${port1%%-*} oplport=${port2%%-*} else # ACPI: mixed-up order port=${port3%%-*} oplport=${port1%%-*} fi } < $WSSDEV/resources # To see what's going on here: # --------------------------- # cat /sys/devices/pnp0/00:07/resources # # state = active # io 0x530-0x537 # io 0x388-0x38b # io 0x220-0x233 # irq 5 # dma 1 # dma 0 # ^^^ "bla" labels in first field (discarded). { read # Discard first line, as above. read bla port1 cport=${port1%%-*} # ^^^^ # Just want _start_ address of port. } < $CTLDEV/resources # Load the module: modprobe --ignore-install snd-cs4236 port=$port cport=$cport fm_port=$oplport irq=$irq dma1=$dma1 dma2=$dma2 isapnp=0 index=0 # See the modprobe manpage. exit $? Appendix A. Contributed Scripts 672
- 679. Advanced Bash-Scripting Guide Example A-35. Locating split paragraphs in a text file #!/bin/bash # find-splitpara.sh # Finds split paragraphs in a text file, #+ and tags the line numbers. ARGCOUNT=1 # Expect one arg. E_WRONGARGS=65 file="$1" # Target filename. lineno=1 # Line number. Start at 1. Flag=0 # Blank line flag. if [ $# -ne "$ARGCOUNT" ] then echo "Usage: `basename $0` FILENAME" exit $E_WRONGARGS fi file_read () # Scan file for pattern, then print line. { while read line do if [[ "$line" =~ ^[a-z] && $Flag -eq 1 ]] then # Line begins with lc character, following blank line. echo -n "$lineno:: " echo "$line" fi if [[ "$line" =~ "^$" ]] then # If blank line, Flag=1 #+ set flag. else Flag=0 fi ((lineno++)) done } < $file # Redirect file into function's stdin. file_read exit $? # ---------------------------------------------------------------- This is line one of an example paragraph, bla, bla, bla. This is line two, and line three should follow on next line, but there is a blank line separating the two parts of the paragraph. # ---------------------------------------------------------------- Running this script on a file containing the above paragraph yields: 4:: there is a blank line separating the two parts of the paragraph. Appendix A. Contributed Scripts 673
- 680. Advanced Bash-Scripting Guide There will be additional output for all the other split paragraphs in the target file. Example A-36. Insertion sort #!/bin/bash # insertion-sort.bash: Insertion sort implementation in Bash # Heavy use of Bash array features: #+ (string) slicing, merging, etc # URL: http://www.lugmen.org.ar/~jjo/jjotip/insertion-sort.bash.d #+ /insertion-sort.bash.sh # # Author: JuanJo Ciarlante <jjo@irrigacion.gov.ar> # Lightly reformatted by ABS Guide author. # License: GPLv2 # Used in ABS Guide with author's permission (thanks!). # # Test with: ./insertion-sort.bash -t # Or: bash insertion-sort.bash -t # The following *doesn't* work: # sh insertion-sort.bash -t # Why not? Hint: which Bash-specific features are disabled #+ when running a script by 'sh script.sh'? # : ${DEBUG:=0} # Debug, override with: DEBUG=1 ./scriptname . . . # Parameter substitution -- set DEBUG to 0 if not previously set. # Global array: "list" typeset -a list # Load whitespace-separated numbers from stdin. if [ "$1" = "-t" ]; then DEBUG=1 read -a list < <( od -Ad -w24 -t u2 /dev/urandom ) # Random list. # ^ ^ process substition else read -a list fi numelem=${#list[*]} # Shows the list, marking the element whose index is $1 #+ by surrounding it with the two chars passed as $2. # Whole line prefixed with $3. showlist() { echo "$3"${list[@]:0:$1} ${2:0:1}${list[$1]}${2:1:1} ${list[@]:$1+1}; } # Loop _pivot_ -- from second element to end of list. for(( i=1; i<numelem; i++ )) do ((DEBUG))&&showlist i "[]" " " # From current _pivot_, back to first element. for(( j=i; j; j-- )) do # Search for the 1st elem. less than current "pivot" . . . [[ "${list[j-1]}" -le "${list[i]}" ]] && break done (( i==j )) && continue ## No insertion was needed for this element. # . . . Move list[i] (pivot) to the left of list[j]: list=(${list[@]:0:j} ${list[i]} ${list[j]} Appendix A. Contributed Scripts 674
- 681. Advanced Bash-Scripting Guide # {0,j-1} {i} {j} ${list[@]:j+1:i-(j+1)} ${list[@]:i+1}) # {j+1,i-1} {i+1,last} ((DEBUG))&&showlist j "<>" "*" done echo echo "------" echo $'Result:n'${list[@]} exit $? Example A-37. Standard Deviation #!/bin/bash # sd.sh: Standard Deviation # The Standard Deviation indicates how consistent a set of data is. # It shows to what extent the individual data points deviate from the #+ arithmetic mean, i.e., how much they "bounce around" (or cluster). # It is essentially the average deviation-distance of the #+ data points from the mean. # =========================================================== # # To calculate the Standard Deviation: # # 1 Find the arithmetic mean (average) of all the data points. # 2 Subtract each data point from the arithmetic mean, # and square that difference. # 3 Add all of the individual difference-squares in # 2. # 4 Divide the sum in # 3 by the number of data points. # This is known as the "variance." # 5 The square root of # 4 gives the Standard Deviation. # =========================================================== # count=0 # Number of data points; global. SC=9 # Scale to be used by bc. Nine decimal places. E_DATAFILE=90 # Data file error. # ----------------- Set data file --------------------- if [ ! -z "$1" ] # Specify filename as cmd-line arg? then datafile="$1" # ASCII text file, else #+ one (numerical) data point per line! datafile=sample.dat fi # See example data file, below. if [ ! -e "$datafile" ] then echo """$datafile"" does not exist!" exit $E_DATAFILE fi # ----------------------------------------------------- arith_mean () { local rt=0 # Running total. local am=0 # Arithmetic mean. local ct=0 # Number of data points. Appendix A. Contributed Scripts 675
- 682. Advanced Bash-Scripting Guide while read value # Read one data point at a time. do rt=$(echo "scale=$SC; $rt + $value" | bc) (( ct++ )) done am=$(echo "scale=$SC; $rt / $ct" | bc) echo $am; return $ct # This function "returns" TWO values! # Caution: This little trick will not work if $ct > 255! # To handle a larger number of data points, #+ simply comment out the "return $ct" above. } <"$datafile" # Feed in data file. sd () { mean1=$1 # Arithmetic mean (passed to function). n=$2 # How many data points. sum2=0 # Sum of squared differences ("variance"). avg2=0 # Average of $sum2. sdev=0 # Standard Deviation. while read value # Read one line at a time. do diff=$(echo "scale=$SC; $mean1 - $value" | bc) # Difference between arith. mean and data point. dif2=$(echo "scale=$SC; $diff * $diff" | bc) # Squared. sum2=$(echo "scale=$SC; $sum2 + $dif2" | bc) # Sum of squares. done avg2=$(echo "scale=$SC; $sum2 / $n" | bc) # Avg. of sum of squares. sdev=$(echo "scale=$SC; sqrt($avg2)" | bc) # Square root = echo $sdev # Standard Deviation. } <"$datafile" # Rewinds data file. # ======================================================= # mean=$(arith_mean); count=$? # Two returns from function! std_dev=$(sd $mean $count) echo echo "Number of data points in ""$datafile"" = $count" echo "Arithmetic mean (average) = $mean" echo "Standard Deviation = $std_dev" echo # ======================================================= # exit # This script could stand some drastic streamlining, #+ but not at the cost of reduced legibility, please. # ++++++++++++++++++++++++++++++++++++++++ # # A sample data file (sample1.dat): # 18.35 # 19.0 # 18.88 # 18.91 Appendix A. Contributed Scripts 676
- 683. Advanced Bash-Scripting Guide # 18.64 # $ sh sd.sh sample1.dat # Number of data points in "sample1.dat" = 5 # Arithmetic mean (average) = 18.756000000 # Standard Deviation = .235338054 # ++++++++++++++++++++++++++++++++++++++++ # Example A-38. A pad file generator for shareware authors #!/bin/bash # pad.sh ####################################################### # PAD (xml) file creator #+ Written by Mendel Cooper <thegrendel.abs@gmail.com>. #+ Released to the Public Domain. # # Generates a "PAD" descriptor file for shareware #+ packages, according to the specifications #+ of the ASP. # http://www.asp-shareware.org/pad ####################################################### # Accepts (optional) save filename as a command-line argument. if [ -n "$1" ] then savefile=$1 else savefile=save_file.xml # Default save_file name. fi # ===== PAD file headers ===== HDR1="<?xml version="1.0" encoding="Windows-1252" ?>" HDR2="<XML_DIZ_INFO>" HDR3="<MASTER_PAD_VERSION_INFO>" HDR4="t<MASTER_PAD_VERSION>1.15</MASTER_PAD_VERSION>" HDR5="t<MASTER_PAD_INFO>Portable Application Description, or PAD for short, is a data set that is used by shareware authors to disseminate information to anyone interested in their software products. To find out more go to http://www.asp-shareware.org/pad</MASTER_PAD_INFO>" HDR6="</MASTER_PAD_VERSION_INFO>" # ============================ fill_in () { if [ -z "$2" ] then echo -n "$1? " # Get user input. else echo -n "$1 $2? " # Additional query? fi read var # May paste to fill in field. # This shows how flexible "read" can be. Appendix A. Contributed Scripts 677
- 684. Advanced Bash-Scripting Guide if [ -z "$var" ] then echo -e "tt<$1 />" >>$savefile # Indent with 2 tabs. return else echo -e "tt<$1>$var</$1>" >>$savefile return ${#var} # Return length of input string. fi } check_field_length () # Check length of program description fields. { # $1 = maximum field length # $2 = actual field length if [ "$2" -gt "$1" ] then echo "Warning: Maximum field length of $1 characters exceeded!" fi } clear # Clear screen. echo "PAD File Creator" echo "--- ---- -------" echo # Write File Headers to file. echo $HDR1 >$savefile echo $HDR2 >>$savefile echo $HDR3 >>$savefile echo -e $HDR4 >>$savefile echo -e $HDR5 >>$savefile echo $HDR6 >>$savefile # Company_Info echo "COMPANY INFO" CO_HDR="Company_Info" echo "<$CO_HDR>" >>$savefile fill_in Company_Name fill_in Address_1 fill_in Address_2 fill_in City_Town fill_in State_Province fill_in Zip_Postal_Code fill_in Country # If applicable: # fill_in ASP_Member "[Y/N]" # fill_in ASP_Member_Number # fill_in ESC_Member "[Y/N]" fill_in Company_WebSite_URL clear # Clear screen between sections. # Contact_Info echo "CONTACT INFO" CONTACT_HDR="Contact_Info" echo "<$CONTACT_HDR>" >>$savefile fill_in Author_First_Name fill_in Author_Last_Name Appendix A. Contributed Scripts 678
- 685. Advanced Bash-Scripting Guide fill_in Author_Email fill_in Contact_First_Name fill_in Contact_Last_Name fill_in Contact_Email echo -e "t</$CONTACT_HDR>" >>$savefile # END Contact_Info clear # Support_Info echo "SUPPORT INFO" SUPPORT_HDR="Support_Info" echo "<$SUPPORT_HDR>" >>$savefile fill_in Sales_Email fill_in Support_Email fill_in General_Email fill_in Sales_Phone fill_in Support_Phone fill_in General_Phone fill_in Fax_Phone echo -e "t</$SUPPORT_HDR>" >>$savefile # END Support_Info echo "</$CO_HDR>" >>$savefile # END Company_Info clear # Program_Info echo "PROGRAM INFO" PROGRAM_HDR="Program_Info" echo "<$PROGRAM_HDR>" >>$savefile fill_in Program_Name fill_in Program_Version fill_in Program_Release_Month fill_in Program_Release_Day fill_in Program_Release_Year fill_in Program_Cost_Dollars fill_in Program_Cost_Other fill_in Program_Type "[Shareware/Freeware/GPL]" fill_in Program_Release_Status "[Beta, Major Upgrade, etc.]" fill_in Program_Install_Support fill_in Program_OS_Support "[Win9x/Win2k/Linux/etc.]" fill_in Program_Language "[English/Spanish/etc.]" echo; echo # File_Info echo "FILE INFO" FILEINFO_HDR="File_Info" echo "<$FILEINFO_HDR>" >>$savefile fill_in Filename_Versioned fill_in Filename_Previous fill_in Filename_Generic fill_in Filename_Long fill_in File_Size_Bytes fill_in File_Size_K fill_in File_Size_MB echo -e "t</$FILEINFO_HDR>" >>$savefile # END File_Info clear Appendix A. Contributed Scripts 679
- 686. Advanced Bash-Scripting Guide # Expire_Info echo "EXPIRE INFO" EXPIRE_HDR="Expire_Info" echo "<$EXPIRE_HDR>" >>$savefile fill_in Has_Expire_Info "Y/N" fill_in Expire_Count fill_in Expire_Based_On fill_in Expire_Other_Info fill_in Expire_Month fill_in Expire_Day fill_in Expire_Year echo -e "t</$EXPIRE_HDR>" >>$savefile # END Expire_Info clear # More Program_Info echo "ADDITIONAL PROGRAM INFO" fill_in Program_Change_Info fill_in Program_Specific_Category fill_in Program_Categories fill_in Includes_JAVA_VM "[Y/N]" fill_in Includes_VB_Runtime "[Y/N]" fill_in Includes_DirectX "[Y/N]" # END More Program_Info echo "</$PROGRAM_HDR>" >>$savefile # END Program_Info clear # Program Description echo "PROGRAM DESCRIPTIONS" PROGDESC_HDR="Program_Descriptions" echo "<$PROGDESC_HDR>" >>$savefile LANG="English" echo "<$LANG>" >>$savefile fill_in Keywords "[comma + space separated]" echo echo "45, 80, 250, 450, 2000 word program descriptions" echo "(may cut and paste into field)" # It would be highly appropriate to compose the following #+ "Char_Desc" fields with a text editor, #+ then cut-and-paste the text into the answer fields. echo echo " |---------------45 characters---------------|" fill_in Char_Desc_45 check_field_length 45 "$?" echo fill_in Char_Desc_80 check_field_length 80 "$?" fill_in Char_Desc_250 check_field_length 250 "$?" fill_in Char_Desc_450 fill_in Char_Desc_2000 echo "</$LANG>" >>$savefile Appendix A. Contributed Scripts 680
- 687. Advanced Bash-Scripting Guide echo "</$PROGDESC_HDR>" >>$savefile # END Program Description clear echo "Done."; echo; echo echo "Save file is: ""$savefile""" exit 0 Example A-39. A man page editor #!/bin/bash # maned.sh # A rudimentary man page editor # Version: 0.1 (Alpha, probably buggy) # Author: Mendel Cooper <thegrendel.abs@gmail.com> # Reldate: 16 June 2008 # License: GPL3 savefile= # Global, used in multiple functions. E_NOINPUT=90 # User input missing (error). May or may not be critical. # =========== Markup Tags ============ # TopHeader=".TH" NameHeader=".SH NAME" SyntaxHeader=".SH SYNTAX" SynopsisHeader=".SH SYNOPSIS" InstallationHeader=".SH INSTALLATION" DescHeader=".SH DESCRIPTION" OptHeader=".SH OPTIONS" FilesHeader=".SH FILES" EnvHeader=".SH ENVIRONMENT" AuthHeader=".SH AUTHOR" BugsHeader=".SH BUGS" SeeAlsoHeader=".SH SEE ALSO" BOLD=".B" # Add more tags, as needed. # See groff docs for markup meanings. # ==================================== # start () { clear # Clear screen. echo "ManEd" echo "-----" echo echo "Simple man page creator" echo "Author: Mendel Cooper" echo; echo; echo } progname () { echo -n "Program name? " read name echo -n "Manpage section? [Hit RETURN for default ("1") ] " read section if [ -z "$section" ] Appendix A. Contributed Scripts 681
- 688. Advanced Bash-Scripting Guide then section=1 # Most man pages are in section 1. fi if [ -n "$name" ] then savefile=""$name"."$section"" # Filename suffix = section. echo -n "$1 " >>$savefile name1=$(echo "$name" | tr a-z A-Z) # Change to uppercase, #+ per man page convention. echo -n "$name1" >>$savefile else echo "Error! No input." # Mandatory input. exit $E_NOINPUT # Critical! fi echo -n " "$section"">>$savefile # Append, always append. echo -n "Version? " read ver echo -n " "Version $ver "">>$savefile echo >>$savefile echo -n "Short description [0 - 5 words]? " read sdesc echo "$NameHeader">>$savefile echo ""$BOLD" "$name"">>$savefile echo "- "$sdesc"">>$savefile } fill_in () { # This function more or less copied from "pad.sh" script. echo -n "$2? " # Get user input. read var # May paste (a single line only!) to fill in field. if [ -n "$var" ] then echo "$1 " >>$savefile echo -n "$var" >>$savefile else # Don't append empty field to file. return $E_NOINPUT # Not critical here. fi echo >>$savefile } end () { clear echo -n "Would you like to view the saved man page (y/n)? " read ans if [ "$ans" = "n" -o "$ans" = "N" ]; then exit; fi exec less "$savefile" # Exit script and hand off control to "less" ... #+ ... which formats for viewing man page source. } # ---------------------------------------- # start Appendix A. Contributed Scripts 682
- 689. Advanced Bash-Scripting Guide progname "$TopHeader" fill_in "$SynopsisHeader" "Synopsis" fill_in "$DescHeader" "Long description" # May paste in *single line* of text. fill_in "$OptHeader" "Options" fill_in "$FilesHeader" "Files" fill_in "$AuthHeader" "Author" fill_in "$BugsHeader" "Bugs" fill_in "$SeeAlsoHeader" "See also" # fill_in "$OtherHeader" ... as necessary. end # ... exit not needed. # ---------------------------------------- # # Note that the generated man page will usually #+ require manual fine-tuning with a text editor. # However, it's a distinct improvement upon #+ writing man source from scratch #+ or even editing a blank man page template. # The main deficiency of the script is that it permits #+ pasting only a single text line into the input fields. # This may be a long, cobbled-together line, which groff # will automatically wrap and hyphenate. # However, if you want multiple (newline-separated) paragraphs, #+ these must be inserted by manual text editing on the #+ script-generated man page. # Exercise (difficult): Fix this! # This script is not nearly as elaborate as the #+ full-featured "manedit" package (http://wolfpack.twu.net), #+ but it's much easier to use. Example A-40. Petals Around the Rose #!/bin/bash -i # petals.sh ######################################################################### # Petals Around the Rose # # # # Version 0.1 Created by Serghey Rodin # # Version 0.2 Modded by ABS Guide Author # # # # License: GPL3 # # Used in ABS Guide with permission. # # ##################################################################### # hits=0 # Correct guesses. WIN=6 # Mastered the game. ALMOST=5 # One short of mastery. EXIT=exit # Give up early? RANDOM=$$ # Seeds the random number generator from PID of script. # Bones (ASCII graphics for dice) bone1[1]="| |" bone1[2]="| o |" bone1[3]="| o |" bone1[4]="| o o |" bone1[5]="| o o |" Appendix A. Contributed Scripts 683
- 690. Advanced Bash-Scripting Guide bone1[6]="| o o |" bone2[1]="| o |" bone2[2]="| |" bone2[3]="| o |" bone2[4]="| |" bone2[5]="| o |" bone2[6]="| o o |" bone3[1]="| |" bone3[2]="| o |" bone3[3]="| o |" bone3[4]="| o o |" bone3[5]="| o o |" bone3[6]="| o o |" bone="+---------+" # Functions instructions () { clear echo -n "Do you need instructions? (y/n) "; read ans if [ "$ans" = "y" -o "$ans" = "Y" ]; then clear echo -e 'E[34;47m' # Blue type. # "cat document" cat <<INSTRUCTIONSZZZ The name of the game is Petals Around the Rose, and that name is significant. Five dice will roll and you must guess the "answer" for each roll. It will be zero or an even number. After your guess, you will be told the answer for the roll, but . . . that's ALL the information you will get. Six consecutive correct guesses admits you to the Fellowship of the Rose. INSTRUCTIONSZZZ echo -e "033[0m" # Turn off blue. else clear fi } fortune () { RANGE=7 FLOOR=0 number=0 while [ "$number" -le $FLOOR ] do number=$RANDOM let "number %= $RANGE" # 1 - 6. done return $number } Appendix A. Contributed Scripts 684
- 691. Advanced Bash-Scripting Guide throw () { # Calculate each individual die. fortune; B1=$? fortune; B2=$? fortune; B3=$? fortune; B4=$? fortune; B5=$? calc () { # Function embedded within a function! case "$1" in 3 ) rose=2;; 5 ) rose=4;; * ) rose=0;; esac # Simplified algorithm. # Doesn't really get to the heart of the matter. return $rose } answer=0 calc "$B1"; answer=$(expr $answer + $(echo $?)) calc "$B2"; answer=$(expr $answer + $(echo $?)) calc "$B3"; answer=$(expr $answer + $(echo $?)) calc "$B4"; answer=$(expr $answer + $(echo $?)) calc "$B5"; answer=$(expr $answer + $(echo $?)) } game () { # Generate graphic display of dice throw. throw echo -e "033[1m" # Bold. echo -e "n" echo -e "$bonet$bonet$bonet$bonet$bone" echo -e "${bone1[$B1]}t${bone1[$B2]}t${bone1[$B3]}t${bone1[$B4]}t${bone1[$B5]}" echo -e "${bone2[$B1]}t${bone2[$B2]}t${bone2[$B3]}t${bone2[$B4]}t${bone2[$B5]}" echo -e "${bone3[$B1]}t${bone3[$B2]}t${bone3[$B3]}t${bone3[$B4]}t${bone3[$B5]}" echo -e "$bonet$bonet$bonet$bonet$bone" echo -e "nntt" echo -e "033[0m" # Turn off bold. echo -n "There are how many petals around the rose? " } # ============================================================== # instructions while [ "$petal" != "$EXIT" ] # Main loop. do game read petal echo "$petal" | grep [0-9] >/dev/null # Filter response for digit. # Otherwise just roll dice again. if [ "$?" -eq 0 ] # If-loop #1. then if [ "$petal" == "$answer" ]; then # If-loop #2. echo -e "nCorrect. There are $petal petals around the rose.n" Appendix A. Contributed Scripts 685
- 692. Advanced Bash-Scripting Guide (( hits++ )) if [ "$hits" -eq "$WIN" ]; then # If-loop #3. echo -e 'E[31;47m' # Red type. echo -e "033[1m" # Bold. echo "You have unraveled the mystery of the Rose Petals!" echo "Welcome to the Fellowship of the Rose!!!" echo "(You are herewith sworn to secrecy.)"; echo echo -e "033[0m" # Turn off red & bold. break # Exit! else echo "You have $hits correct so far."; echo if [ "$hits" -eq "$ALMOST" ]; then echo "Just one more gets you to the heart of the mystery!"; echo fi fi # Close if-loop #3. else echo -e "nWrong. There are $answer petals around the rose.n" hits=0 # Reset number of correct guesses. fi # Close if-loop #2. echo -n "Hit ENTER for the next roll, or type "exit" to end. " read if [ "$REPLY" = "$EXIT" ]; then exit fi fi # Close if-loop #1. clear done # End of main (while) loop. ### exit $? # Resources: # --------- # 1) http://en.wikipedia.org/wiki/Petals_Around_the_Rose # (Wikipedia entry.) # 2) http://www.borrett.id.au/computing/petals-bg.htm # (How Bill Gates coped with the Petals Around the Rose challenge.) Example A-41. Quacky: a Perquackey-type word game #!/bin/bash # qky.sh ############################################################## # QUACKEY: a somewhat simplified version of Perquackey [TM]. # # # # Author: Mendel Cooper <thegrendel.abs@gmail.com> # # version 0.1.02 03 May, 2008 # # License: GPL3 # ############################################################## WLIST=/usr/share/dict/word.lst # ^^^^^^^^ Word list file found here. # ASCII word list, one word per line, UNIX format. # A suggested list is the script author's "yawl" word list package. Appendix A. Contributed Scripts 686
- 693. Advanced Bash-Scripting Guide # http://bash.neuralshortciruit.com/yawl-0.3.2.tar.gz # or # http://ibiblio.org/pub/Linux/libs/yawl-0.3.2.tar.gz NONCONS=0 # Word not constructable from letter set. CONS=1 # Constructable. SUCCESS=0 NG=1 FAILURE='' NULL=0 # Zero out value of letter (if found). MINWLEN=3 # Minimum word length. MAXCAT=5 # Maximum number of words in a given category. PENALTY=200 # General-purpose penalty for unacceptable words. total= E_DUP=70 # Duplicate word error. TIMEOUT=10 # Time for word input. NVLET=10 # 10 letters for non-vulnerable. VULET=13 # 13 letters for vulnerable (not yet implemented). declare -a Words declare -a Status declare -a Score=( 0 0 0 0 0 0 0 0 0 0 0 ) letters=( a n s r t m l k p r b c i d s i d z e w u e t f e y e r e f e g t g h h i t r s c i t i d i j a t a o l a m n a n o v n w o s e l n o s p a q e e r a b r s a o d s t g t i t l u e u v n e o x y m r k ) # Letter distribution table shamelessly borrowed from "Wordy" game, #+ ca. 1992, written by a certain fine fellow named Mendel Cooper. declare -a LS numelements=${#letters[@]} randseed="$1" instructions () { clear echo "Welcome to QUACKEY, the anagramming word construction game."; echo echo -n "Do you need instructions? (y/n) "; read ans if [ "$ans" = "y" -o "$ans" = "Y" ]; then clear echo -e 'E[31;47m' # Red foreground. 'E[34;47m' for blue. cat <<INSTRUCTION1 QUACKEY is a variant of Perquackey [TM]. The rules are the same, but the scoring is simplified and plurals of previously played words are allowed. "Vulnerable" play is not yet implemented, but it is otherwise feature-complete. As the game begins, the player gets 10 letters. The object is to construct valid dictionary words of at least 3-letter-length from the letterset. Each word-length category -- 3-letter, 4-letter, 5-letter, ... -- fills up with the fifth word entered, and no further words in that category are accepted. Appendix A. Contributed Scripts 687
- 694. Advanced Bash-Scripting Guide The penalty for too-short (two-letter), duplicate, unconstructable, and invalid (not in dictionary) words is -200. The same penalty applies to attempts to enter a word in a filled-up category. INSTRUCTION1 echo -n "Hit ENTER for next page of instructions. "; read az1 cat <<INSTRUCTION2 The scoring mostly corresponds to classic Perquackey: The first 3-letter word scores 60, plus 10 for each additional one. The first 4-letter word scores 120, plus 20 for each additional one. The first 5-letter word scores 200, plus 50 for each additional one. The first 6-letter word scores 300, plus 100 for each additional one. The first 7-letter word scores 500, plus 150 for each additional one. The first 8-letter word scores 750, plus 250 for each additional one. The first 9-letter word scores 1000, plus 500 for each additional one. The first 10-letter word scores 2000, plus 2000 for each additional one. Category completion bonuses are: 3-letter words 100 4-letter words 200 5-letter words 400 6-letter words 800 7-letter words 2000 8-letter words 10000 This is a simplification of the absurdly complicated Perquackey bonus scoring system. INSTRUCTION2 echo -n "Hit ENTER for final page of instructions. "; read az1 cat <<INSTRUCTION3 Hitting just ENTER for a word entry ends the game. Individual word entry is timed to a maximum of 10 seconds. *** Timing out on an entry ends the game. *** Other than that, the game is untimed. -------------------------------------------------- Game statistics are automatically saved to a file. -------------------------------------------------- For competitive ("duplicate") play, a previous letterset may be duplicated by repeating the script's random seed, command-line parameter $1. For example, "qky 7633" specifies the letterset c a d i f r h u s k ... INSTRUCTION3 echo; echo -n "Hit ENTER to begin game. "; read az1 echo -e "033[0m" # Turn off red. else clear fi clear Appendix A. Contributed Scripts 688
- 695. Advanced Bash-Scripting Guide } seed_random () { # Seed random number generator. if [ -n "$randseed" ] # Can specify random seed. then #+ for play in competitive mode. # RANDOM="$randseed" echo "RANDOM seed set to "$randseed"" else randseed="$$" # Or get random seed from process ID. echo "RANDOM seed not specified, set to Process ID of script ($$)." fi RANDOM="$randseed" echo } get_letset () { element=0 echo -n "Letterset:" for lset in $(seq $NVLET) do # Pick random letters to fill out letterset. LS[element]="${letters[$((RANDOM%numelements))]}" ((element++)) done echo echo "${LS[@]}" } add_word () { wrd="$1" local idx=0 Status[0]="" Status[3]="" Status[4]="" while [ "${Words[idx]}" != '' ] do if [ "${Words[idx]}" = "$wrd" ] then Status[3]="Duplicate-word-PENALTY" let "Score[0]= 0 - $PENALTY" let "Score[1]-=$PENALTY" return $E_DUP fi ((idx++)) done Words[idx]="$wrd" Appendix A. Contributed Scripts 689
- 696. Advanced Bash-Scripting Guide get_score } get_score() { local wlen=0 local score=0 local bonus=0 local first_word=0 local add_word=0 local numwords=0 wlen=${#wrd} numwords=${Score[wlen]} Score[2]=0 Status[4]="" # Initialize "bonus" to 0. case "$wlen" in 3) first_word=60 add_word=10;; 4) first_word=120 add_word=20;; 5) first_word=200 add_word=50;; 6) first_word=300 add_word=100;; 7) first_word=500 add_word=150;; 8) first_word=750 add_word=250;; 9) first_word=1000 add_word=500;; 10) first_word=2000 add_word=2000;; # This category modified from original rules! esac ((Score[wlen]++)) if [ ${Score[wlen]} -eq $MAXCAT ] then # Category completion bonus scoring simplified! case $wlen in 3 ) bonus=100;; 4 ) bonus=200;; 5 ) bonus=400;; 6 ) bonus=800;; 7 ) bonus=2000;; 8 ) bonus=10000;; esac # Needn't worry about 9's and 10's. Status[4]="Category-$wlen-completion***BONUS***" Score[2]=$bonus else Status[4]="" # Erase it. fi let "score = $first_word + $add_word * $numwords" if [ "$numwords" -eq 0 ] then Score[0]=$score else Score[0]=$add_word fi # All this to distinguish last-word score Appendix A. Contributed Scripts 690
- 697. Advanced Bash-Scripting Guide #+ from total running score. let "Score[1] += ${Score[0]}" let "Score[1] += ${Score[2]}" } get_word () { local wrd='' read -t $TIMEOUT wrd # Timed read. echo $wrd } is_constructable () { # This was the most complex and difficult-to-write function. local -a local_LS=( "${LS[@]}" ) # Local copy of letter set. local is_found=0 local idx=0 local pos local strlen local local_word=( "$1" ) strlen=${#local_word} while [ "$idx" -lt "$strlen" ] do is_found=$(expr index "${local_LS[*]}" "${local_word:idx:1}") if [ "$is_found" -eq "$NONCONS" ] # Not constructable! then echo "$FAILURE"; return else ((pos = ($is_found - 1) / 2)) # Compensate for spaces betw. letters! local_LS[pos]=$NULL # Zero out used letters. ((idx++)) # Bump index. fi done echo "$SUCCESS" return } is_valid () { # Surprisingly easy to check if word in dictionary ... fgrep -qw "$1" "$WLIST" # ... thanks to 'grep' ... echo $? } check_word () { if [ -z "$1" ] then return fi Status[1]="" Status[2]="" Status[3]="" Status[4]="" iscons=$(is_constructable "$1") if [ "$iscons" ] Appendix A. Contributed Scripts 691
- 698. Advanced Bash-Scripting Guide then Status[1]="constructable" v=$(is_valid "$1") if [ "$v" -eq "$SUCCESS" ] then Status[2]="valid" strlen=${#1} if [ ${Score[strlen]} -eq "$MAXCAT" ] # Category full! then Status[3]="Category-$strlen-overflow-PENALTY" return $NG fi case "$strlen" in 1 | 2 ) Status[3]="Two-letter-word-PENALTY" return $NG;; * ) Status[3]="" return $SUCCESS;; esac else Status[3]="Not-valid-PENALTY" return $NG fi else Status[3]="Not-constructable-PENALTY" return $NG fi ### FIXME: Streamline the above code. } display_words () { local idx=0 local wlen0 clear echo "Letterset: ${LS[@]}" echo "Threes: Fours: Fives: Sixes: Sevens: Eights:" echo "------------------------------------------------------------" while [ "${Words[idx]}" != '' ] do wlen0=${#Words[idx]} case "$wlen0" in 3) ;; 4) echo -n " " ;; 5) echo -n " " ;; 6) echo -n " " ;; 7) echo -n " " ;; 8) echo -n " " ;; esac echo "${Words[idx]}" ((idx++)) done Appendix A. Contributed Scripts 692
- 699. Advanced Bash-Scripting Guide ### FIXME: The word display is pretty crude. } play () { word="Start game" # Dummy word, to start ... while [ "$word" ] # If player just hits return (blank word), do #+ then game ends. echo "$word: "${Status[@]}"" echo -n "Last score: [${Score[0]}] TOTAL score: [${Score[1]}]: Next word: " total=${Score[1]} word=$(get_word) check_word "$word" if [ "$?" -eq "$SUCCESS" ] then add_word "$word" else let "Score[0]= 0 - $PENALTY" let "Score[1]-=$PENALTY" fi display_words done # Exit game. ### FIXME: The play () function calls too many other functions. ### This is perilously close to "spaghetti code" ... } end_of_game () { # Save and display stats. #######################Autosave########################## savefile=qky.save.$$ # ^^ PID of script echo `date` >> $savefile echo "Letterset # $randseed (random seed) ">> $savefile echo -n "Letterset: " >> $savefile echo "${LS[@]}" >> $savefile echo "---------" >> $savefile echo "Words constructed:" >> $savefile echo "${Words[@]}" >> $savefile echo >> $savefile echo "Score: $total" >> $savefile echo "Statistics for this round saved in ""$savefile""" ######################################################### echo "Score for this round: $total" echo "Words: ${Words[@]}" } # ---------# instructions seed_random get_letset play end_of_game # ---------# Appendix A. Contributed Scripts 693
- 700. Advanced Bash-Scripting Guide exit $? # TODO: # # 1) Clean up code! # 2) Prettify the display_words () function (maybe with widgets?). # 3) Improve the time-out ... maybe change to untimed entry, #+ but with a time limit for the overall round. # 4) An on-screen countdown timer would be nice. # 5) Implement "vulnerable" mode of play. # 6) Improve save-to-file capability (and maybe make it optional). # 7) Fix bugs!!! # Reference for more info: # http://bash.neuralshortcircuit.com/qky.README.html Example A-42. Nim #!/bin/bash # nim.sh: Game of Nim # Author: Mendel Cooper # Reldate: 15 July 2008 # License: GPL3 ROWS=5 # Five rows of pegs (or matchsticks). WON=91 # Exit codes to keep track of wins/losses. LOST=92 # Possibly useful if running in batch mode. QUIT=99 peg_msg= # Peg/Pegs? Rows=( 0 5 4 3 2 1 ) # Array holding play info. # ${Rows[0]} holds total number of pegs, updated after each turn. # Other array elements hold number of pegs in corresponding row. instructions () { clear tput bold echo "Welcome to the game of Nim."; echo echo -n "Do you need instructions? (y/n) "; read ans if [ "$ans" = "y" -o "$ans" = "Y" ]; then clear echo -e 'E[33;41m' # Yellow fg., over red bg.; bold. cat <<INSTRUCTIONS Nim is a game with roots in the distant past. This particular variant starts with five rows of pegs. 1: | | | | | 2: | | | | 3: | | | 4: | | 5: | The number at the left identifies the row. The human player moves first, and alternates turns with the bot. A turn consists of removing at least one peg from a single row. It is permissable to remove ALL the pegs from a row. Appendix A. Contributed Scripts 694
- 701. Advanced Bash-Scripting Guide For example, in row 2, above, the player can remove 1, 2, 3, or 4 pegs. The player who removes the last peg loses. The strategy consists of trying to be the one who removes the next-to-last peg(s), leaving the loser with the final peg. To exit the game early, hit ENTER during your turn. INSTRUCTIONS echo; echo -n "Hit ENTER to begin game. "; read azx echo -e "033[0m" # Restore display. else tput sgr0; clear fi clear } tally_up () { let "Rows[0] = ${Rows[1]} + ${Rows[2]} + ${Rows[3]} + ${Rows[4]} + ${Rows[5]}" # Add up how many pegs remaining. } display () { index=1 # Start with top row. echo while [ "$index" -le "$ROWS" ] do p=${Rows[index]} echo -n "$index: " # Show row number. # ------------------------------------------------ # Two concurrent inner loops. indent=$index while [ "$indent" -gt 0 ] do echo -n " " # Staggered rows. ((indent--)) # Spacing between pegs. done while [ "$p" -gt 0 ] do echo -n "| " ((p--)) done # ----------------------------------------------- echo ((index++)) done tally_up rp=${Rows[0]} Appendix A. Contributed Scripts 695
- 702. Advanced Bash-Scripting Guide if [ "$rp" -eq 1 ] then peg_msg=peg final_msg="Game over." else # Game not yet over . . . peg_msg=pegs final_msg="" # . . . So "final message" is blank. fi echo " $rp $peg_msg remaining." echo " "$final_msg"" echo } player_move () { echo "Your move:" echo -n "Which row? " while read idx do # Validity check, etc. if [ -z "$idx" ] # Hitting return quits. then echo "Premature exit."; echo tput sgr0 # Restore display. exit $QUIT fi if [ "$idx" -gt "$ROWS" -o "$idx" -lt 1 ] # Bounds check. then echo "Invalid row number!" echo -n "Which row? " else break fi # TODO: # Add check for non-numeric input. # Also, script crashes on input outside of range of long double. # Fix this. done echo -n "Remove how many? " while read num do # Validity check. if [ -z "$num" ] then echo "Premature exit."; echo tput sgr0 # Restore display. exit $QUIT fi if [ "$num" -gt ${Rows[idx]} -o "$num" -lt 1 ] then echo "Cannot remove $num!" echo -n "Remove how many? " else Appendix A. Contributed Scripts 696
- 703. Advanced Bash-Scripting Guide break fi done # TODO: # Add check for non-numeric input. # Also, script crashes on input outside of range of long double. # Fix this. let "Rows[idx] -= $num" display tally_up if [ ${Rows[0]} -eq 1 ] then echo " Human wins!" echo " Congratulations!" tput sgr0 # Restore display. echo exit $WON fi if [ ${Rows[0]} -eq 0 ] then # Snatching defeat from the jaws of victory . . . echo " Fool!" echo " You just removed the last peg!" echo " Bot wins!" tput sgr0 # Restore display. echo exit $LOST fi } bot_move () { row_b=0 while [[ $row_b -eq 0 || ${Rows[row_b]} -eq 0 ]] do row_b=$RANDOM # Choose random row. let "row_b %= $ROWS" done num_b=0 r0=${Rows[row_b]} if [ "$r0" -eq 1 ] then num_b=1 else let "num_b = $r0 - 1" # Leave only a single peg in the row. fi # Not a very strong strategy, #+ but probably a bit better than totally random. let "Rows[row_b] -= $num_b" echo -n "Bot: " echo "Removing from row $row_b ... " if [ "$num_b" -eq 1 ] Appendix A. Contributed Scripts 697
- 704. Advanced Bash-Scripting Guide then peg_msg=peg else peg_msg=pegs fi echo " $num_b $peg_msg." display tally_up if [ ${Rows[0]} -eq 1 ] then echo " Bot wins!" tput sgr0 # Restore display. exit $WON fi } # ================================================== # instructions # If human player needs them . . . tput bold # Bold characters for easier viewing. display # Show game board. while [ true ] # Main loop. do # Alternate human and bot turns. player_move bot_move done # ================================================== # # Exercise: # -------- # Improve the bot's strategy. # There is, in fact, a Nim strategy that can force a win. # See the Wikipedia article on Nim: http://en.wikipedia.org/wiki/Nim # Recode the bot to use this strategy (rather difficult). # Curiosities: # ----------- # Nim played a prominent role in Alain Resnais' 1961 New Wave film, #+ Last Year at Marienbad. # # In 1978, Leo Christopherson wrote an animated version of Nim, #+ Android Nim, for the TRS-80 Model I. Example A-43. A command-line stopwatch #!/bin/sh # sw.sh # A command-line Stopwatch # Author: Pádraig Brady # http://www.pixelbeat.org/scripts/sw # (Minor reformatting by ABS Guide author.) # Used in ABS Guide with script author's permission. # Notes: # This script starts a few processes per lap, in addition to # the shell loop processing, so the assumption is made that Appendix A. Contributed Scripts 698
- 705. Advanced Bash-Scripting Guide # this takes an insignificant amount of time compared to # the response time of humans (~.1s) (or the keyboard # interrupt rate (~.05s)). # '?' for splits must be entered twice if characters # (erroneously) entered before it (on the same line). # '?' since not generating a signal may be slightly delayed # on heavily loaded systems. # Lap timings on ubuntu may be slightly delayed due to: # https://bugs.launchpad.net/bugs/62511 # Changes: # V1.0, 23 Aug 2005, Initial release # V1.1, 26 Jul 2007, Allow both splits and laps from single invocation. # Only start timer after a key is pressed. # Indicate lap number # Cache programs at startup so there is less error # due to startup delays. # V1.2, 01 Aug 2007, Work around `date` commands that don't have # nanoseconds. # Use stty to change interrupt keys to space for # laps etc. # Ignore other input as it causes problems. # V1.3, 01 Aug 2007, Testing release. # V1.4, 02 Aug 2007, Various tweaks to get working under ubuntu # and Mac OS X. # V1.5, 27 Jun 2008, set LANG=C as got vague bug report about it. export LANG=C ulimit -c 0 # No coredumps from SIGQUIT. trap '' TSTP # Ignore Ctrl-Z just in case. save_tty=`stty -g` && trap "stty $save_tty" EXIT # Restore tty on exit. stty quit ' ' # Space for laps rather than Ctrl-. stty eof '?' # ? for splits rather than Ctrl-D. stty -echo # Don't echo input. cache_progs() { stty > /dev/null date > /dev/null grep . < /dev/null (echo "import time" | python) 2> /dev/null bc < /dev/null sed '' < /dev/null printf '1' > /dev/null /usr/bin/time false 2> /dev/null cat < /dev/null } cache_progs # To minimise startup delay. date +%s.%N | grep -qF 'N' && use_python=1 # If `date` lacks nanoseconds. now() { if [ "$use_python" ]; then echo "import time; print time.time()" 2>/dev/null | python else printf "%.2f" `date +%s.%N` fi } fmt_seconds() { seconds=$1 mins=`echo $seconds/60 | bc` if [ "$mins" != "0" ]; then seconds=`echo "$seconds - ($mins*60)" | bc` Appendix A. Contributed Scripts 699
- 706. Advanced Bash-Scripting Guide echo "$mins:$seconds" else echo "$seconds" fi } total() { end=`now` total=`echo "$end - $start" | bc` fmt_seconds $total } stop() { [ "$lapped" ] && lap "$laptime" "display" total exit } lap() { laptime=`echo "$1" | sed -n 's/.*real[^0-9.]*(.*)/1/p'` [ ! "$laptime" -o "$laptime" = "0.00" ] && return # Signals too frequent. laptotal=`echo $laptime+0$laptotal | bc` if [ "$2" = "display" ]; then lapcount=`echo 0$lapcount+1 | bc` laptime=`fmt_seconds $laptotal` echo $laptime "($lapcount)" lapped="true" laptotal="0" fi } echo -n "Space for lap | ? for split | Ctrl-C to stop | Space to start...">&2 while true; do trap true INT QUIT # Set signal handlers. laptime=`/usr/bin/time -p 2>&1 cat >/dev/null` ret=$? trap '' INT QUIT # Ignore signals within this script. if [ $ret -eq 1 -o $ret -eq 2 -o $ret -eq 130 ]; then # SIGINT = stop [ ! "$start" ] && { echo >&2; exit; } stop elif [ $ret -eq 3 -o $ret -eq 131 ]; then # SIGQUIT = lap if [ ! "$start" ]; then start=`now` || exit 1 echo >&2 continue fi lap "$laptime" "display" else # eof = split [ ! "$start" ] && continue total lap "$laptime" # Update laptotal. fi done exit $? Example A-44. An all-purpose shell scripting homework assignment solution #!/bin/bash Appendix A. Contributed Scripts 700
- 707. Advanced Bash-Scripting Guide # homework.sh: All-purpose homework assignment solution. # Author: M. Leo Cooper # If you substitute your own name as author, then it is plagiarism, #+ possibly a lesser sin than cheating on your homework! # License: Public Domain # This script may be turned in to your instructor #+ in fulfillment of ALL shell scripting homework assignments. # It's sparsely commented, but you, the student, can easily remedy that. # The script author repudiates all responsibility! DLA=1 P1=2 P2=4 P3=7 PP1=0 PP2=8 MAXL=9 E_LZY=99 declare -a L L[0]="3 4 0 17 29 8 13 18 19 17 20 2 19 14 17 28" L[1]="8 29 12 14 18 19 29 4 12 15 7 0 19 8 2 0 11 11 24 29 17 4 6 17 4 19" L[2]="29 19 7 0 19 29 8 29 7 0 21 4 29 13 4 6 11 4 2 19 4 3" L[3]="19 14 29 2 14 12 15 11 4 19 4 29 19 7 8 18 29" L[4]="18 2 7 14 14 11 22 14 17 10 29 0 18 18 8 6 13 12 4 13 19 26" L[5]="15 11 4 0 18 4 29 0 2 2 4 15 19 29 12 24 29 7 20 12 1 11 4 29" L[6]="4 23 2 20 18 4 29 14 5 29 4 6 17 4 6 8 14 20 18 29" L[7]="11 0 25 8 13 4 18 18 27" L[8]="0 13 3 29 6 17 0 3 4 29 12 4 29 0 2 2 14 17 3 8 13 6 11 24 26" L[9]="19 7 0 13 10 29 24 14 20 26" declare -a alph=( A B C D E F G H I J K L M N O P Q R S T U V W X Y Z . , : ' ' ) pt_lt () { echo -n "${alph[$1]}" echo -n -e "a" sleep $DLA } b_r () { echo -e 'E[31;48m033[1m' } cr () { echo -e "a" sleep $DLA } restore () { echo -e '033[0m' # Bold off. tput sgr0 # Normal. } p_l () Appendix A. Contributed Scripts 701
- 708. Advanced Bash-Scripting Guide { for ltr in $1 do pt_lt "$ltr" done } # ---------------------- b_r for i in $(seq 0 $MAXL) do p_l "${L[i]}" if [[ "$i" -eq "$P1" || "$i" -eq "$P2" || "$i" -eq "$P3" ]] then cr elif [[ "$i" -eq "$PP1" || "$i" -eq "$PP2" ]] then cr; cr fi done restore # ---------------------- echo exit $E_LZY # A typical example of an obfuscated script that is difficult #+ to understand, and frustrating to maintain. # In your career as a sysadmin, you'll run into these critters #+ all too often. Example A-45. The Knight's Tour #!/bin/bash # ktour.sh # author: mendel cooper # reldate: 12 Jan 2009 # license: public domain # (Not much sense GPLing something that's pretty much in the common #+ domain anyhow.) ################################################################### # The Knight's Tour, a classic problem. # # ===================================== # # The knight must move onto every square of the chess board, # # but cannot revisit any square he has already visited. # # # # And just why is Sir Knight unwelcome for a return visit? # # Could it be that he has a habit of partying into the wee hours # #+ of the morning? # # Possibly he leaves pizza crusts in the bed, empty beer bottles # #+ all over the floor, and clogs the plumbing. . . . # # # # ------------------------------------------------------------- # # # # Usage: ktour.sh [start-square] [stupid] # Appendix A. Contributed Scripts 702
- 709. Advanced Bash-Scripting Guide # # # Note that start-square can be a square number # #+ in the range 0 - 63 ... or # # a square designator in conventional chess notation, # # such as a1, f5, h3, etc. # # # # If start-square-number not supplied, # #+ then starts on a random square somewhere on the board. # # # # "stupid" as second parameter sets the stupid strategy. # # # # Examples: # # ktour.sh 23 starts on square #23 (h3) # # ktour.sh g6 stupid starts on square #46, # # using "stupid" (non-Warnsdorff) strategy. # ################################################################### DEBUG= # Set this to echo debugging info to stdout. SUCCESS=0 FAIL=99 BADMOVE=-999 FAILURE=1 LINELEN=21 # How many moves to display per line. # ---------------------------------------- # # Board array params ROWS=8 # 8 x 8 board. COLS=8 let "SQUARES = $ROWS * $COLS" let "MAX = $SQUARES - 1" MIN=0 # 64 squares on board, indexed from 0 to 63. VISITED=1 UNVISITED=-1 UNVSYM="##" # ---------------------------------------- # # Global variables. startpos= # Starting position (square #, 0 - 63). currpos= # Current position. movenum= # Move number. CRITPOS=37 # Have to patch for f5 starting position! declare -i board # Use a one-dimensional array to simulate a two-dimensional one. # This can make life difficult and result in ugly kludges; see below. declare -i moves # Offsets from current knight position. initialize_board () { local idx for idx in {0..63} do board[$idx]=$UNVISITED done } print_board () { Appendix A. Contributed Scripts 703
- 710. Advanced Bash-Scripting Guide local idx echo " _____________________________________" for row in {7..0} # Reverse order of rows ... do #+ so it prints in chessboard order. let "rownum = $row + 1" # Start numbering rows at 1. echo -n "$rownum |" # Mark board edge with border and for column in {0..7} #+ "algebraic notation." do let "idx = $ROWS*$row + $column" if [ ${board[idx]} -eq $UNVISITED ] then echo -n "$UNVSYM " ## else # Mark square with move number. printf "%02d " "${board[idx]}"; echo -n " " fi done echo -e -n "bbb|" # b is a backspace. echo # -e enables echoing escaped chars. done echo " -------------------------------------" echo " a b c d e f g h" } failure() { # Whine, then bail out. echo print_board echo echo " Waah!!! Ran out of squares to move to!" echo -n " Knight's Tour attempt ended" echo " on $(to_algebraic $currpos) [square #$currpos]" echo " after just $movenum moves!" echo exit $FAIL } xlat_coords () # Translate x/y coordinates to board position { #+ (board-array element #). # For user input of starting board position as x/y coords. # This function not used in initial release of ktour.sh. # May be used in an updated version, for compatibility with #+ standard implementation of the Knight's Tour in C, Python, etc. if [ -z "$1" -o -z "$2" ] then return $FAIL fi local xc=$1 local yc=$2 let "board_index = $xc * $ROWS + yc" if [ $board_index -lt $MIN -o $board_index -gt $MAX ] then return $FAIL # Strayed off the board! else Appendix A. Contributed Scripts 704
- 711. Advanced Bash-Scripting Guide return $board_index fi } to_algebraic () # Translate board position (board-array element #) { #+ to standard algebraic notation used by chess players. if [ -z "$1" ] then return $FAIL fi local element_no=$1 # Numerical board position. local col_arr=( a b c d e f g h ) local row_arr=( 1 2 3 4 5 6 7 8 ) let "row_no = $element_no / $ROWS" let "col_no = $element_no % $ROWS" t1=${col_arr[col_no]}; t2=${row_arr[row_no]} local apos=$t1$t2 # Concatenate. echo $apos } from_algebraic () # Translate standard algebraic chess notation { #+ to numerical board position (board-array element #). # Or recognize numerical input & return it unchanged. if [ -z "$1" ] then return $FAIL fi # If no command-line arg, then will default to random start pos. local ix local ix_count=0 local b_index # Board index [0-63] local alpos="$1" arow=${alpos:0:1} # position = 0, length = 1 acol=${alpos:1:1} if [[ $arow =~ [[:digit:]] ]] # Numerical input? then # POSIX char class if [[ $acol =~ [[:alpha:]] ]] # Number followed by a letter? Illegal! then return $FAIL else if [ $alpos -gt $MAX ] # Off board? then return $FAIL else return $alpos # Return digit(s) unchanged . . . fi #+ if within range. fi fi if [[ $acol -eq $MIN || $acol -gt $ROWS ]] then # Outside of range 1 - 8? return $FAIL fi for ix in a b c d e f g h do # Convert column letter to column number. if [ "$arow" = "$ix" ] then Appendix A. Contributed Scripts 705
- 712. Advanced Bash-Scripting Guide break fi ((ix_count++)) # Find index count. done ((acol--)) # Decrementing converts to zero-based array. let "b_index = $ix_count + $acol * $ROWS" if [ $b_index -gt $MAX ] # Off board? then return $FAIL fi return $b_index } generate_moves () # Calculate all valid knight moves, { #+ relative to current position ($1), #+ and store in ${moves} array. local kt_hop=1 # One square :: short leg of knight move. local kt_skip=2 # Two squares :: long leg of knight move. local valmov=0 # Valid moves. local row_pos; let "row_pos = $1 % $COLS" let "move1 = -$kt_skip + $ROWS" # 2 sideways to-the-left, 1 up if [[ `expr $row_pos - $kt_skip` -lt $MIN ]] # An ugly, ugly kludge! then # Can't move off board. move1=$BADMOVE # Not even temporarily. else ((valmov++)) fi let "move2 = -$kt_hop + $kt_skip * $ROWS" # 1 sideways to-the-left, 2 up if [[ `expr $row_pos - $kt_hop` -lt $MIN ]] # Kludge continued ... then move2=$BADMOVE else ((valmov++)) fi let "move3 = $kt_hop + $kt_skip * $ROWS" # 1 sideways to-the-right, 2 up if [[ `expr $row_pos + $kt_hop` -ge $COLS ]] then move3=$BADMOVE else ((valmov++)) fi let "move4 = $kt_skip + $ROWS" # 2 sideways to-the-right, 1 up if [[ `expr $row_pos + $kt_skip` -ge $COLS ]] then move4=$BADMOVE else ((valmov++)) fi let "move5 = $kt_skip - $ROWS" # 2 sideways to-the-right, 1 dn if [[ `expr $row_pos + $kt_skip` -ge $COLS ]] then move5=$BADMOVE else ((valmov++)) fi Appendix A. Contributed Scripts 706
- 713. Advanced Bash-Scripting Guide let "move6 = $kt_hop - $kt_skip * $ROWS" # 1 sideways to-the-right, 2 dn if [[ `expr $row_pos + $kt_hop` -ge $COLS ]] then move6=$BADMOVE else ((valmov++)) fi let "move7 = -$kt_hop - $kt_skip * $ROWS" # 1 sideways to-the-left, 2 dn if [[ `expr $row_pos - $kt_hop` -lt $MIN ]] then move7=$BADMOVE else ((valmov++)) fi let "move8 = -$kt_skip - $ROWS" # 2 sideways to-the-left, 1 dn if [[ `expr $row_pos - $kt_skip` -lt $MIN ]] then move8=$BADMOVE else ((valmov++)) fi # There must be a better way to do this. local m=( $valmov $move1 $move2 $move3 $move4 $move5 $move6 $move7 $move8 ) # ${moves[0]} = number of valid moves. # ${moves[1]} ... ${moves[8]} = possible moves. echo "${m[*]}" # Elements of array to stdout for capture in a var. } is_on_board () # Is position actually on the board? { if [[ "$1" -lt "$MIN" || "$1" -gt "$MAX" ]] then return $FAILURE else return $SUCCESS fi } do_move () # Move the knight! { local valid_moves=0 local aapos currposl="$1" lmin=$ROWS iex=0 squarel= mpm= mov= declare -a p_moves ########################## DECIDE-MOVE ############################# if [ $startpos -ne $CRITPOS ] then # CRITPOS = square #37 decide_move else # Needs a special patch for startpos=37 !!! decide_move_patched # Why this particular move and no other ??? fi Appendix A. Contributed Scripts 707
- 714. Advanced Bash-Scripting Guide #################################################################### (( ++movenum )) # Increment move count. let "square = $currposl + ${moves[iex]}" ################## DEBUG ############### if [ "$DEBUG" ] then debug # Echo debugging information. fi ############################################## if [[ "$square" -gt $MAX || "$square" -lt $MIN || ${board[square]} -ne $UNVISITED ]] then (( --movenum )) # Decrement move count, echo "RAN OUT OF SQUARES!!!" #+ since previous one was invalid. return $FAIL fi board[square]=$movenum currpos=$square # Update current position. ((valid_moves++)); # moves[0]=$valid_moves aapos=$(to_algebraic $square) echo -n "$aapos " test $(( $Moves % $LINELEN )) -eq 0 && echo # Print LINELEN=21 moves per line. A valid tour shows 3 complete lines. return $valid_moves # Found a square to move to! } do_move_stupid() # Dingbat algorithm, { #+ courtesy of script author, *not* Warnsdorff. local valid_moves=0 local movloc local squareloc local aapos local cposloc="$1" for movloc in {1..8} do # Move to first-found unvisited square. let "squareloc = $cposloc + ${moves[movloc]}" is_on_board $squareloc if [ $? -eq $SUCCESS ] && [ ${board[squareloc]} -eq $UNVISITED ] then # Add conditions to above if-test to improve algorithm. (( ++movenum )) board[squareloc]=$movenum currpos=$squareloc # Update current position. ((valid_moves++)); # moves[0]=$valid_moves aapos=$(to_algebraic $squareloc) echo -n "$aapos " test $(( $Moves % $LINELEN )) -eq 0 && echo # Print 21 moves/line. return $valid_moves # Found a square to move to! fi done return $FAIL # If no square found in all 8 loop iterations, #+ then Knight's Tour attempt ends in failure. # Dingbat algorithm will typically fail after about 30 - 40 moves, #+ but executes _much_ faster than Warnsdorff's in do_move() function. Appendix A. Contributed Scripts 708
- 715. Advanced Bash-Scripting Guide } decide_move () # Which move will we make? { # But, fails on startpos=37 !!! for mov in {1..8} do let "squarel = $currposl + ${moves[mov]}" is_on_board $squarel if [[ $? -eq $SUCCESS && ${board[squarel]} -eq $UNVISITED ]] then # Find accessible square with least possible future moves. # This is Warnsdorff's algorithm. # What happens is that the knight wanders toward the outer edge #+ of the board, then pretty much spirals inward. # Given two or more possible moves with same value of #+ least-possible-future-moves, this implementation chooses #+ the _first_ of those moves. # This means that there is not necessarily a unique solution #+ for any given starting position. possible_moves $squarel mpm=$? p_moves[mov]=$mpm if [ $mpm -lt $lmin ] # If less than previous minimum ... then # ^^ lmin=$mpm # Update minimum. iex=$mov # Save index. fi fi done } decide_move_patched () # Decide which move to make, { # ^^^^^^^ #+ but only if startpos=37 !!! for mov in {1..8} do let "squarel = $currposl + ${moves[mov]}" is_on_board $squarel if [[ $? -eq $SUCCESS && ${board[squarel]} -eq $UNVISITED ]] then possible_moves $squarel mpm=$? p_moves[mov]=$mpm if [ $mpm -le $lmin ] # If less-than-or equal to prev. minimum! then # ^^ lmin=$mpm iex=$mov fi fi done # There has to be a better way to do this. } possible_moves () # Calculate number of possible moves, Appendix A. Contributed Scripts 709
- 716. Advanced Bash-Scripting Guide { #+ given the current position. if [ -z "$1" ] then return $FAIL fi local curr_pos=$1 local valid_movl=0 local icx=0 local movl local sq declare -a movesloc movesloc=( $(generate_moves $curr_pos) ) for movl in {1..8} do let "sq = $curr_pos + ${movesloc[movl]}" is_on_board $sq if [ $? -eq $SUCCESS ] && [ ${board[sq]} -eq $UNVISITED ] then ((valid_movl++)); fi done return $valid_movl # Found a square to move to! } strategy () { echo if [ -n "$STUPID" ] then for Moves in {1..63} do cposl=$1 moves=( $(generate_moves $currpos) ) do_move_stupid "$currpos" if [ $? -eq $FAIL ] then failure fi done fi # Don't need an "else" clause here, #+ because Stupid Strategy will always fail and exit! for Moves in {1..63} do cposl=$1 moves=( $(generate_moves $currpos) ) do_move "$currpos" if [ $? -eq $FAIL ] then failure fi done # Could have condensed above two do-loops into a single one, Appendix A. Contributed Scripts 710
- 717. Advanced Bash-Scripting Guide echo #+ but this would have slowed execution. print_board echo echo "Knight's Tour ends on $(to_algebraic $currpos) [square #$currpos]." return $SUCCESS } debug () { # Enable this by setting DEBUG=1 near beginning of script. local n echo "=================================" echo " At move number $movenum:" echo " *** possible moves = $mpm ***" # echo "### square = $square ###" echo "lmin = $lmin" echo "${moves[@]}" for n in {1..8} do echo -n "($n):${p_moves[n]} " done echo echo "iex = $iex :: moves[iex] = ${moves[iex]}" echo "square = $square" echo "=================================" echo } # Gives pretty complete status after ea. move. # =============================================================== # # int main () { from_algebraic "$1" startpos=$? if [ "$startpos" -eq "$FAIL" ] # Okay even if no $1. then # ^^^^^^^^^^^ Okay even if input -lt 0. echo "No starting square specified (or illegal input)." let "startpos = $RANDOM % $SQUARES" # 0 - 63 permissable range. fi if [ "$2" = "stupid" ] then STUPID=1 echo -n " ### Stupid Strategy ###" else STUPID='' echo -n " *** Warnsdorff's Algorithm ***" fi initialize_board movenum=0 board[startpos]=$movenum # Mark each board square with move number. currpos=$startpos algpos=$(to_algebraic $startpos) echo; echo "Starting from $algpos [square #$startpos] ..."; echo Appendix A. Contributed Scripts 711
- 718. Advanced Bash-Scripting Guide echo -n "Moves:" strategy "$currpos" echo exit 0 # return 0; # } # End of main() pseudo-function. # =============================================================== # # Exercises: # --------- # # 1) Extend this example to a 10 x 10 board or larger. # 2) Improve the "stupid strategy" by modifying the # do_move_stupid function. # Hint: Prevent straying into corner squares in early moves # (the exact opposite of Warnsdorff's algorithm!). # 3) This script could stand considerable improvement and # streamlining, especially in the poorly-written # generate_moves() function # and in the DECIDE-MOVE patch in the do_move() function. # Must figure out why standard algorithm fails for startpos=37 ... #+ but _not_ on any other, including symmetrical startpos=26. # Possibly, when calculating possible moves, counts the move back #+ to the originating square. If so, it might be a relatively easy fix. Example A-46. Magic Squares #!/bin/bash # msquare.sh # Magic Square generator (odd-order squares only!) # Author: mendel cooper # reldate: 19 Jan. 2009 # License: Public Domain # A C-program by Kwon Young Shin inspired this script. # See http://user.chollian.net/~brainstm/MagicSquare.htm ... # Definition: A "magic square" is a two-dimensional array # of integers in which all the rows, columns, # and *long* diagonals add up to the same number. # Being "square," the array has the same number # of rows and columns. # An example of a magic square of order 3 is: # 8 1 6 # 3 5 7 # 4 9 2 # All the rows, columns, and long diagonals add up to 15. # Globals EVEN=2 MAXSIZE=31 # 31 rows x 31 cols. E_usage=90 # Invocation error. dimension= declare -i square usage_message () Appendix A. Contributed Scripts 712
- 719. Advanced Bash-Scripting Guide { echo "Usage: $0 square-size" echo " ... where "square-size" is an ODD integer" echo " in the range 3 - 31." # Actually works for squares up to order 159, #+ but large squares will not display pretty-printed in a term window. # Try increasing MAXSIZE, above. exit $E_usage } calculate () # Here's where the actual work gets done. { local row col index dimadj j k cell_val=1 dimension=$1 let "dimadj = $dimension * 3"; let "dimadj /= 2" # x 1.5, then truncate. for ((j=0; j < dimension; j++)) do for ((k=0; k < dimension; k++)) do # Calculate indices, then convert to 1-dim. array index. # Bash doesn't support multidimensional arrays. Pity. let "col = $k - $j + $dimadj"; let "col %= $dimension" let "row = $j * 2 - $k + $dimension"; let "row %= $dimension" let "index = $row*($dimension) + $col" square[$index]=cell_val; ((cell_val++)) done done } # Plain math, no visualization required. print_square () # Output square, one row at a time. { local row col idx d1 let "d1 = $dimension - 1" # Adjust for zero-indexed array. for row in $(seq 0 $d1) do for col in $(seq 0 $d1) do let "idx = $row * $dimension + $col" printf "%3d " "${square[idx]}"; echo -n " " done # Displays up to 13-order neatly in 80-column term window. echo # Newline after each row. done } ################################################# if [[ -z "$1" ]] || [[ "$1" -gt $MAXSIZE ]] then usage_message fi let "test_even = $1 % $EVEN" if [ $test_even -eq 0 ] then # Can't handle even-order squares. usage_message fi Appendix A. Contributed Scripts 713
- 720. Advanced Bash-Scripting Guide calculate $1 print_square # echo "${square[@]}" # DEBUG exit $? ################################################# # Exercises: # --------- # 1) Add a function to calculate the sum of each row, column, # and *long* diagonal. The sums must match. # This is the "magic constant" of that particular order square. # 2) Have the print_square function auto-calculate how much space # to allot between square elements for optimized display. # This might require parameterizing the "printf" line. # 3) Add appropriate functions for generating magic squares # with an *even* number of rows/columns. # This is non-trivial(!). # See the URL for Kwon Young Shin, above, for help. Example A-47. Fifteen Puzzle #!/bin/bash # fifteen.sh # Classic "Fifteen Puzzle" # Author: Antonio Macchi # Lightly edited and commented by ABS Guide author. # Used in ABS Guide with permission. (Thanks!) # The invention of the Fifteen Puzzle is attributed to either #+ Sam Loyd or Noyes Palmer Chapman. # The puzzle was wildly popular in the late 19th-century. # Object: Rearrange the numbers so they read in order, #+ from 1 - 15: ________________ # | 1 2 3 4 | # | 5 6 7 8 | # | 9 10 11 12 | # | 13 14 15 | # ---------------- ####################### # Constants # SQUARES=16 # FAIL=70 # E_PREMATURE_EXIT=80 # ####################### ######## # Data # ######## Puzzle=( 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 " " ) ############# # Functions # Appendix A. Contributed Scripts 714
- 721. Advanced Bash-Scripting Guide ############# function swap { local tmp tmp=${Puzzle[$1]} Puzzle[$1]=${Puzzle[$2]} Puzzle[$2]=$tmp } function Jumble { # Scramble the pieces at beginning of round. local i pos1 pos2 for i in {1..100} do pos1=$(( $RANDOM % $SQUARES)) pos2=$(( $RANDOM % $SQUARES )) swap $pos1 $pos2 done } function PrintPuzzle { local i1 i2 puzpos puzpos=0 clear echo "Enter quit to exit."; echo # Better that than Ctl-C. echo ",----.----.----.----." # Top border. for i1 in {1..4} do for i2 in {1..4} do printf "| %2s " "${Puzzle[$puzpos]}" (( puzpos++ )) done echo "|" # Right-side border. test $i1 = 4 || echo "+----+----+----+----+" done echo "'----'----'----'----'" # Bottom border. } function GetNum { # Test for valid input. local puznum garbage while true do echo "Moves: $moves" # Also counts invalid moves. read -p "Number to move: " puznum garbage if [ "$puznum" = "quit" ]; then echo; exit $E_PREMATURE_EXIT; fi test -z "$puznum" -o -n "${puznum//[0-9]/}" && continue test $puznum -gt 0 -a $puznum -lt $SQUARES && break done return $puznum } Appendix A. Contributed Scripts 715
- 722. Advanced Bash-Scripting Guide function GetPosFromNum { # $1 = puzzle-number local puzpos for puzpos in {0..15} do test "${Puzzle[$puzpos]}" = "$1" && break done return $puzpos } function Move { # $1=Puzzle-pos test $1 -gt 3 && test "${Puzzle[$(( $1 - 4 ))]}" = " " && swap $1 $(( $1 - 4 )) && return 0 test $(( $1%4 )) -ne 3 && test "${Puzzle[$(( $1 + 1 ))]}" = " " && swap $1 $(( $1 + 1 )) && return 0 test $1 -lt 12 && test "${Puzzle[$(( $1 + 4 ))]}" = " " && swap $1 $(( $1 + 4 )) && return 0 test $(( $1%4 )) -ne 0 && test "${Puzzle[$(( $1 - 1 ))]}" = " " && swap $1 $(( $1 - 1 )) && return 0 return 1 } function Solved { local pos for pos in {0..14} do test "${Puzzle[$pos]}" = $(( $pos + 1 )) || return $FAIL # Check whether number in each square = square number. done return 0 # Successful solution. } ################### MAIN () ######################## moves=0 Jumble while true # Loop continuously until puzzle solved. do echo; echo PrintPuzzle echo while true do GetNum puznum=$? GetPosFromNum $puznum puzpos=$? ((moves++)) Move $puzpos && break done Solved && break done Appendix A. Contributed Scripts 716
- 723. Advanced Bash-Scripting Guide echo;echo PrintPuzzle echo; echo "BRAVO!"; echo exit 0 #################################################### # Exercise: # -------- # Rewrite the script to display the letters A - O, #+ rather than the numbers 1 - 15. Example A-48. The Towers of Hanoi, graphic version #! /bin/bash # The Towers Of Hanoi # Original script (hanoi.bash) copyright (C) 2000 Amit Singh. # All Rights Reserved. # http://hanoi.kernelthread.com # hanoi2.bash # Version 2.00: modded for ASCII-graphic display. # Version 2.01: fixed no command-line param bug. # Uses code contributed by Antonio Macchi, #+ with heavy editing by ABS Guide author. # This variant falls under the original copyright, see above. # Used in ABS Guide with Amit Singh's permission (thanks!). ### Variables && sanity check ### E_NOPARAM=86 E_BADPARAM=87 # Illegal no. of disks passed to script. E_NOEXIT=88 DISKS=${1:-E_NOPARAM} # Must specify how many disks. Moves=0 MWIDTH=7 MARGIN=2 # Arbitrary "magic" constants; work okay for relatively small # of disks. # BASEWIDTH=51 # Original code. let "basewidth = $MWIDTH * $DISKS + $MARGIN" # "Base" beneath rods. # Above "algorithm" could likely stand improvement. ### Display variables ### let "disks1 = $DISKS - 1" let "spaces1 = $DISKS" let "spaces2 = 2 * $DISKS" let "lastmove_t = $DISKS - 1" # Final move? declare -a Rod1 Rod2 Rod3 ### ######################### ### function repeat { # $1=char $2=number of repetitions local n # Repeat-print a character. Appendix A. Contributed Scripts 717
- 724. Advanced Bash-Scripting Guide for (( n=0; n<$2; n++ )); do echo -n "$1" done } function FromRod { local rod summit weight sequence while true; do rod=$1 test ${rod/[^123]/} || continue sequence=$(echo $(seq 0 $disks1 | tac)) for summit in $sequence; do eval weight=${Rod${rod}[$summit]} test $weight -ne 0 && { echo "$rod $summit $weight"; return; } done done } function ToRod { # $1=previous (FromRod) weight local rod firstfree weight sequence while true; do rod=$2 test ${rod/[^123]} || continue sequence=$(echo $(seq 0 $disks1 | tac)) for firstfree in $sequence; do eval weight=${Rod${rod}[$firstfree]} test $weight -gt 0 && { (( firstfree++ )); break; } done test $weight -gt $1 -o $firstfree = 0 && { echo "$rod $firstfree"; return; } done } function PrintRods { local disk rod empty fill sp sequence repeat " " $spaces1 echo -n "|" repeat " " $spaces2 echo -n "|" repeat " " $spaces2 echo "|" sequence=$(echo $(seq 0 $disks1 | tac)) for disk in $sequence; do for rod in {1..3}; do eval empty=$(( $DISKS - (Rod${rod}[$disk] / 2) )) eval fill=${Rod${rod}[$disk]} repeat " " $empty test $fill -gt 0 && repeat "*" $fill || echo -n "|" repeat " " $empty done echo Appendix A. Contributed Scripts 718
- 725. Advanced Bash-Scripting Guide done repeat "=" $basewidth # Print "base" beneath rods. echo } display () { echo PrintRods # Get rod-number, summit and weight first=( `FromRod $1` ) eval Rod${first[0]}[${first[1]}]=0 # Get rod-number and first-free position second=( `ToRod ${first[2]} $2` ) eval Rod${second[0]}[${second[1]}]=${first[2]} echo; echo; echo if [ "${Rod3[lastmove_t]}" = 1 ] then # Last move? If yes, then display final position. echo "+ Final Position: $Moves moves"; echo PrintRods fi } # From here down, almost the same as original (hanoi.bash) script. dohanoi() { # Recursive function. case $1 in 0) ;; *) dohanoi "$(($1-1))" $2 $4 $3 if [ "$Moves" -ne 0 ] then echo "+ Position after move $Moves" fi ((Moves++)) echo -n " Next move will be: " echo $2 "-->" $3 display $2 $3 dohanoi "$(($1-1))" $4 $3 $2 ;; esac } setup_arrays () { local dim n elem let "dim1 = $1 - 1" elem=$dim1 for n in $(seq 0 $dim1) do let "Rod1[$elem] = 2 * $n + 1" Rod2[$n]=0 Appendix A. Contributed Scripts 719
- 726. Advanced Bash-Scripting Guide Rod3[$n]=0 ((elem--)) done } ### Main ### setup_arrays $DISKS echo; echo "+ Start Position" case $# in 1) case $(($1>0)) in # Must have at least one disk. 1) disks=$1 dohanoi $1 1 3 2 # Total moves = 2^n - 1, where n = number of disks. echo exit 0; ;; *) echo "$0: Illegal value for number of disks"; exit $E_BADPARAM; ;; esac ;; *) clear echo "usage: $0 N" echo " Where "N" is the number of disks." exit $E_NOPARAM; ;; esac exit $E_NOEXIT # Shouldn't exit here. # Note: # Redirect script output to a file, otherwise it scrolls off display. Example A-49. The Towers of Hanoi, alternate graphic version #! /bin/bash # The Towers Of Hanoi # Original script (hanoi.bash) copyright (C) 2000 Amit Singh. # All Rights Reserved. # http://hanoi.kernelthread.com # hanoi2.bash # Version 2: modded for ASCII-graphic display. # Uses code contributed by Antonio Macchi, #+ with heavy editing by ABS Guide author. # This variant also falls under the original copyright, see above. # Used in ABS Guide with Amit Singh's permission (thanks!). # Variables # E_NOPARAM=86 E_BADPARAM=87 # Illegal no. of disks passed to script. E_NOEXIT=88 DELAY=2 # Interval, in seconds, between moves. Change, if desired. Appendix A. Contributed Scripts 720
- 727. Advanced Bash-Scripting Guide DISKS=$1 Moves=0 MWIDTH=7 MARGIN=2 # Arbitrary "magic" constants, work okay for relatively small # of disks. # BASEWIDTH=51 # Original code. let "basewidth = $MWIDTH * $DISKS + $MARGIN" # "Base" beneath rods. # Above "algorithm" could likely stand improvement. # Display variables. let "disks1 = $DISKS - 1" let "spaces1 = $DISKS" let "spaces2 = 2 * $DISKS" let "lastmove_t = $DISKS - 1" # Final move? declare -a Rod1 Rod2 Rod3 ################# function repeat { # $1=char $2=number of repetitions local n # Repeat-print a character. for (( n=0; n<$2; n++ )); do echo -n "$1" done } function FromRod { local rod summit weight sequence while true; do rod=$1 test ${rod/[^123]/} || continue sequence=$(echo $(seq 0 $disks1 | tac)) for summit in $sequence; do eval weight=${Rod${rod}[$summit]} test $weight -ne 0 && { echo "$rod $summit $weight"; return; } done done } function ToRod { # $1=previous (FromRod) weight local rod firstfree weight sequence while true; do rod=$2 test ${rod/[^123]} || continue sequence=$(echo $(seq 0 $disks1 | tac)) for firstfree in $sequence; do eval weight=${Rod${rod}[$firstfree]} test $weight -gt 0 && { (( firstfree++ )); break; } done test $weight -gt $1 -o $firstfree = 0 && { echo "$rod $firstfree"; return; } Appendix A. Contributed Scripts 721
- 728. Advanced Bash-Scripting Guide done } function PrintRods { local disk rod empty fill sp sequence tput cup 5 0 repeat " " $spaces1 echo -n "|" repeat " " $spaces2 echo -n "|" repeat " " $spaces2 echo "|" sequence=$(echo $(seq 0 $disks1 | tac)) for disk in $sequence; do for rod in {1..3}; do eval empty=$(( $DISKS - (Rod${rod}[$disk] / 2) )) eval fill=${Rod${rod}[$disk]} repeat " " $empty test $fill -gt 0 && repeat "*" $fill || echo -n "|" repeat " " $empty done echo done repeat "=" $basewidth # Print "base" beneath rods. echo } display () { echo PrintRods # Get rod-number, summit and weight first=( `FromRod $1` ) eval Rod${first[0]}[${first[1]}]=0 # Get rod-number and first-free position second=( `ToRod ${first[2]} $2` ) eval Rod${second[0]}[${second[1]}]=${first[2]} if [ "${Rod3[lastmove_t]}" = 1 ] then # Last move? If yes, then display final position. tput cup 0 0 echo; echo "+ Final Position: $Moves moves" PrintRods fi sleep $DELAY } # From here down, almost the same as original (hanoi.bash) script. dohanoi() { # Recursive function. case $1 in 0) ;; Appendix A. Contributed Scripts 722
- 729. Advanced Bash-Scripting Guide *) dohanoi "$(($1-1))" $2 $4 $3 if [ "$Moves" -ne 0 ] then tput cup 0 0 echo; echo "+ Position after move $Moves" fi ((Moves++)) echo -n " Next move will be: " echo $2 "-->" $3 display $2 $3 dohanoi "$(($1-1))" $4 $3 $2 ;; esac } setup_arrays () { local dim n elem let "dim1 = $1 - 1" elem=$dim1 for n in $(seq 0 $dim1) do let "Rod1[$elem] = 2 * $n + 1" Rod2[$n]=0 Rod3[$n]=0 ((elem--)) done } ### Main ### trap "tput cnorm" 0 tput civis clear setup_arrays $DISKS tput cup 0 0 echo; echo "+ Start Position" case $# in 1) case $(($1>0)) in # Must have at least one disk. 1) disks=$1 dohanoi $1 1 3 2 # Total moves = 2^n - 1, where n = # of disks. echo exit 0; ;; *) echo "$0: Illegal value for number of disks"; exit $E_BADPARAM; ;; esac ;; *) echo "usage: $0 N" echo " Where "N" is the number of disks." Appendix A. Contributed Scripts 723
- 730. Advanced Bash-Scripting Guide exit $E_NOPARAM; ;; esac exit $E_NOEXIT # Shouldn't exit here. # Exercise: # -------- # There is a minor bug in the script that causes the display of #+ the next-to-last move to be skipped. #+ Fix this. Example A-50. An alternate version of the getopt-simple.sh script #!/bin/bash # UseGetOpt.sh # Author: Peggy Russell <prusselltechgroup@gmail.com> UseGetOpt () { declare inputOptions declare -r E_OPTERR=85 declare -r ScriptName=${0##*/} declare -r ShortOpts="adf:hlt" declare -r LongOpts="aoption,debug,file:,help,log,test" DoSomething () { echo "The function name is '${FUNCNAME}'" # Recall that $FUNCNAME is an internal variable #+ holding the name of the function it is in. } inputOptions=$(getopt -o "${ShortOpts}" --long "${LongOpts}" --name "${ScriptName}" -- "${@}") if [[ ($? -ne 0) || ($# -eq 0) ]]; then echo "Usage: ${ScriptName} [-dhlt] {OPTION...}" exit $E_OPTERR fi eval set -- "${inputOptions}" # Only for educational purposes. Can be removed. #----------------------------------------------- echo "++ Test: Number of arguments: [$#]" echo '++ Test: Looping through "$@"' for a in "$@"; do echo " ++ [$a]" done #----------------------------------------------- while true; do case "${1}" in --aoption | -a) # Argument found. echo "Option [$1]" ;; --debug | -d) # Enable informational messages. echo "Option [$1] Debugging enabled" ;; Appendix A. Contributed Scripts 724
- 731. Advanced Bash-Scripting Guide --file | -f) # Check for optional argument. case "$2" in #+ Double colon is optional argument. "") # Not there. echo "Option [$1] Use default" shift ;; *) # Got it echo "Option [$1] Using input [$2]" shift ;; esac DoSomething ;; --log | -l) # Enable Logging. echo "Option [$1] Logging enabled" ;; --test | -t) # Enable testing. echo "Option [$1] Testing enabled" ;; --help | -h) echo "Option [$1] Display help" break ;; --) # Done! $# is argument number for "--", $@ is "--" echo "Option [$1] Dash Dash" break ;; *) echo "Major internal error!" exit 8 ;; esac echo "Number of arguments: [$#]" shift done shift # Only for educational purposes. Can be removed. #---------------------------------------------------------------------- echo "++ Test: Number of arguments after "--" is [$#] They are: [$@]" echo '++ Test: Looping through "$@"' for a in "$@"; do echo " ++ [$a]" done #---------------------------------------------------------------------- } ################################### M A I N ######################## # If you remove "function UseGetOpt () {" and corresponding "}", #+ you can uncomment the "exit 0" line below, and invoke this script #+ with the various options from the command-line. #------------------------------------------------------------------- # exit 0 Appendix A. Contributed Scripts 725
- 732. Advanced Bash-Scripting Guide echo "Test 1" UseGetOpt -f myfile one "two three" four echo;echo "Test 2" UseGetOpt -h echo;echo "Test 3 - Short Options" UseGetOpt -adltf myfile anotherfile echo;echo "Test 4 - Long Options" UseGetOpt --aoption --debug --log --test --file myfile anotherfile exit Example A-51. The version of the UseGetOpt.sh example used in the Tab Expansion appendix #!/bin/bash # UseGetOpt-2.sh # Modified version of the script for illustrating tab-expansion #+ of command-line options. # See the "Introduction to Tab Expansion" appendix. # Possible options: -a -d -f -l -t -h #+ --aoption, --debug --file --log --test -- help -- # Author of original script: Peggy Russell <prusselltechgroup@gmail.com> # UseGetOpt () { declare inputOptions declare -r E_OPTERR=85 declare -r ScriptName=${0##*/} declare -r ShortOpts="adf:hlt" declare -r LongOpts="aoption,debug,file:,help,log,test" DoSomething () { echo "The function name is '${FUNCNAME}'" } inputOptions=$(getopt -o "${ShortOpts}" --long "${LongOpts}" --name "${ScriptName}" -- "${@}") if [[ ($? -ne 0) || ($# -eq 0) ]]; then echo "Usage: ${ScriptName} [-dhlt] {OPTION...}" exit $E_OPTERR fi eval set -- "${inputOptions}" while true; do case "${1}" in --aoption | -a) # Argument found. echo "Option [$1]" ;; --debug | -d) # Enable informational messages. echo "Option [$1] Debugging enabled" ;; Appendix A. Contributed Scripts 726
- 733. Advanced Bash-Scripting Guide --file | -f) # Check for optional argument. case "$2" in #+ Double colon is optional argument. "") # Not there. echo "Option [$1] Use default" shift ;; *) # Got it echo "Option [$1] Using input [$2]" shift ;; esac DoSomething ;; --log | -l) # Enable Logging. echo "Option [$1] Logging enabled" ;; --test | -t) # Enable testing. echo "Option [$1] Testing enabled" ;; --help | -h) echo "Option [$1] Display help" break ;; --) # Done! $# is argument number for "--", $@ is "--" echo "Option [$1] Dash Dash" break ;; *) echo "Major internal error!" exit 8 ;; esac echo "Number of arguments: [$#]" shift done shift # } exit Example A-52. Cycling through all the possible color backgrounds #!/bin/bash # show-all-colors.sh # Displays all 256 possible background colors, using ANSI escape sequences. # Author: Chetankumar Phulpagare # Used in ABS Guide with permission. T1=8 Appendix A. Contributed Scripts 727
- 734. Advanced Bash-Scripting Guide T2=6 T3=36 offset=0 for num1 in {0..7} do { for num2 in {0,1} do { shownum=`echo "$offset + $T1 * ${num2} + $num1" | bc` echo -en "E[0;48;5;${shownum}m color ${shownum} E[0m" } done echo } done offset=16 for num1 in {0..5} do { for num2 in {0..5} do { for num3 in {0..5} do { shownum=`echo "$offset + $T2 * ${num3} + $num2 + $T3 * ${num1}" | bc` echo -en "E[0;48;5;${shownum}m color ${shownum} E[0m" } done echo } done } done offset=232 for num1 in {0..23} do { shownum=`expr $offset + $num1` echo -en "E[0;48;5;${shownum}m ${shownum}E[0m" } done echo To end this section, a review of the basics . . . and more. Example A-53. Basics Reviewed #!/bin/bash # basics-reviewed.bash # File extension == *.bash == specific to Bash # Copyright (c) Michael S. Zick, 2003; All rights reserved. # License: Use in any form, for any purpose. # Revision: $ID$ # # Edited for layout by M.C. # (author of the "Advanced Bash Scripting Guide") # Fixes and updates (04/08) by Cliff Bamford. Appendix A. Contributed Scripts 728
- 735. Advanced Bash-Scripting Guide # This script tested under Bash versions 2.04, 2.05a and 2.05b. # It may not work with earlier versions. # This demonstration script generates one --intentional-- #+ "command not found" error message. See line 436. # The current Bash maintainer, Chet Ramey, has fixed the items noted #+ for later versions of Bash. ###-------------------------------------------### ### Pipe the output of this script to 'more' ### ###+ else it will scroll off the page. ### ### ### ### You may also redirect its output ### ###+ to a file for examination. ### ###-------------------------------------------### # Most of the following points are described at length in #+ the text of the foregoing "Advanced Bash Scripting Guide." # This demonstration script is mostly just a reorganized presentation. # -- msz # Variables are not typed unless otherwise specified. # Variables are named. Names must contain a non-digit. # File descriptor names (as in, for example: 2>&1) #+ contain ONLY digits. # Parameters and Bash array elements are numbered. # (Parameters are very similar to Bash arrays.) # A variable name may be undefined (null reference). unset VarNull # A variable name may be defined but empty (null contents). VarEmpty='' # Two, adjacent, single quotes. # A variable name may be defined and non-empty. VarSomething='Literal' # A variable may contain: # * A whole number as a signed 32-bit (or larger) integer # * A string # A variable may also be an array. # A string may contain embedded blanks and may be treated #+ as if it where a function name with optional arguments. # The names of variables and the names of functions #+ are in different namespaces. # A variable may be defined as a Bash array either explicitly or #+ implicitly by the syntax of the assignment statement. # Explicit: declare -a ArrayVar Appendix A. Contributed Scripts 729
- 736. Advanced Bash-Scripting Guide # The echo command is a builtin. echo $VarSomething # The printf command is a builtin. # Translate %s as: String-Format printf %s $VarSomething # No linebreak specified, none output. echo # Default, only linebreak output. # The Bash parser word breaks on whitespace. # Whitespace, or the lack of it is significant. # (This holds true in general; there are, of course, exceptions.) # Translate the DOLLAR_SIGN character as: Content-Of. # Extended-Syntax way of writing Content-Of: echo ${VarSomething} # The ${ ... } Extended-Syntax allows more than just the variable #+ name to be specified. # In general, $VarSomething can always be written as: ${VarSomething}. # Call this script with arguments to see the following in action. # Outside of double-quotes, the special characters @ and * #+ specify identical behavior. # May be pronounced as: All-Elements-Of. # Without specification of a name, they refer to the #+ pre-defined parameter Bash-Array. # Glob-Pattern references echo $* # All parameters to script or function echo ${*} # Same # Bash disables filename expansion for Glob-Patterns. # Only character matching is active. # All-Elements-Of references echo $@ # Same as above echo ${@} # Same as above # Within double-quotes, the behavior of Glob-Pattern references #+ depends on the setting of IFS (Input Field Separator). # Within double-quotes, All-Elements-Of references behave the same. # Specifying only the name of a variable holding a string refers Appendix A. Contributed Scripts 730
- 737. Advanced Bash-Scripting Guide #+ to all elements (characters) of a string. # To specify an element (character) of a string, #+ the Extended-Syntax reference notation (see below) MAY be used. # Specifying only the name of a Bash array references #+ the subscript zero element, #+ NOT the FIRST DEFINED nor the FIRST WITH CONTENTS element. # Additional qualification is needed to reference other elements, #+ which means that the reference MUST be written in Extended-Syntax. # The general form is: ${name[subscript]}. # The string forms may also be used: ${name:subscript} #+ for Bash-Arrays when referencing the subscript zero element. # Bash-Arrays are implemented internally as linked lists, #+ not as a fixed area of storage as in some programming languages. # Characteristics of Bash arrays (Bash-Arrays): # -------------------------------------------- # If not otherwise specified, Bash-Array subscripts begin with #+ subscript number zero. Literally: [0] # This is called zero-based indexing. ### # If not otherwise specified, Bash-Arrays are subscript packed #+ (sequential subscripts without subscript gaps). ### # Negative subscripts are not allowed. ### # Elements of a Bash-Array need not all be of the same type. ### # Elements of a Bash-Array may be undefined (null reference). # That is, a Bash-Array may be "subscript sparse." ### # Elements of a Bash-Array may be defined and empty (null contents). ### # Elements of a Bash-Array may contain: # * A whole number as a signed 32-bit (or larger) integer # * A string # * A string formated so that it appears to be a function name # + with optional arguments ### # Defined elements of a Bash-Array may be undefined (unset). # That is, a subscript packed Bash-Array may be changed # + into a subscript sparse Bash-Array. ### # Elements may be added to a Bash-Array by defining an element #+ not previously defined. ### # For these reasons, I have been calling them "Bash-Arrays". # I'll return to the generic term "array" from now on. # -- msz Appendix A. Contributed Scripts 731
- 738. Advanced Bash-Scripting Guide echo "=========================================================" # Lines 202 - 334 supplied by Cliff Bamford. (Thanks!) # Demo --- Interaction with Arrays, quoting, IFS, echo, * and @ --- #+ all affect how things work ArrayVar[0]='zero' # 0 normal ArrayVar[1]=one # 1 unquoted literal ArrayVar[2]='two' # 2 normal ArrayVar[3]='three' # 3 normal ArrayVar[4]='I am four' # 4 normal with spaces ArrayVar[5]='five' # 5 normal unset ArrayVar[6] # 6 undefined ArrayValue[7]='seven' # 7 normal ArrayValue[8]='' # 8 defined but empty ArrayValue[9]='nine' # 9 normal echo '--- Here is the array we are using for this test' echo echo "ArrayVar[0]='zero' # 0 normal" echo "ArrayVar[1]=one # 1 unquoted literal" echo "ArrayVar[2]='two' # 2 normal" echo "ArrayVar[3]='three' # 3 normal" echo "ArrayVar[4]='I am four' # 4 normal with spaces" echo "ArrayVar[5]='five' # 5 normal" echo "unset ArrayVar[6] # 6 undefined" echo "ArrayValue[7]='seven' # 7 normal" echo "ArrayValue[8]='' # 8 defined but empty" echo "ArrayValue[9]='nine' # 9 normal" echo echo echo '---Case0: No double-quotes, Default IFS of space,tab,newline ---' IFS=$'x20'$'x09'$'x0A' # In exactly this order. echo 'Here is: printf %q {${ArrayVar[*]}' printf %q ${ArrayVar[*]} echo echo 'Here is: printf %q {${ArrayVar[@]}' printf %q ${ArrayVar[@]} echo echo 'Here is: echo ${ArrayVar[*]}' echo ${ArrayVar[@]} echo 'Here is: echo {${ArrayVar[@]}' echo ${ArrayVar[@]} echo echo '---Case1: Within double-quotes - Default IFS of space-tab- newline ---' IFS=$'x20'$'x09'$'x0A' # These three bytes, echo 'Here is: printf %q "{${ArrayVar[*]}"' printf %q "${ArrayVar[*]}" echo echo 'Here is: printf %q "{${ArrayVar[@]}"' printf %q "${ArrayVar[@]}" echo echo 'Here is: echo "${ArrayVar[*]}"' echo "${ArrayVar[@]}" echo 'Here is: echo "{${ArrayVar[@]}"' echo "${ArrayVar[@]}" Appendix A. Contributed Scripts 732
- 739. Advanced Bash-Scripting Guide echo echo '---Case2: Within double-quotes - IFS is q' IFS='q' echo 'Here is: printf %q "{${ArrayVar[*]}"' printf %q "${ArrayVar[*]}" echo echo 'Here is: printf %q "{${ArrayVar[@]}"' printf %q "${ArrayVar[@]}" echo echo 'Here is: echo "${ArrayVar[*]}"' echo "${ArrayVar[@]}" echo 'Here is: echo "{${ArrayVar[@]}"' echo "${ArrayVar[@]}" echo echo '---Case3: Within double-quotes - IFS is ^' IFS='^' echo 'Here is: printf %q "{${ArrayVar[*]}"' printf %q "${ArrayVar[*]}" echo echo 'Here is: printf %q "{${ArrayVar[@]}"' printf %q "${ArrayVar[@]}" echo echo 'Here is: echo "${ArrayVar[*]}"' echo "${ArrayVar[@]}" echo 'Here is: echo "{${ArrayVar[@]}"' echo "${ArrayVar[@]}" echo echo '---Case4: Within double-quotes - IFS is ^ followed by space,tab,newline' IFS=$'^'$'x20'$'x09'$'x0A' # ^ + space tab newline echo 'Here is: printf %q "{${ArrayVar[*]}"' printf %q "${ArrayVar[*]}" echo echo 'Here is: printf %q "{${ArrayVar[@]}"' printf %q "${ArrayVar[@]}" echo echo 'Here is: echo "${ArrayVar[*]}"' echo "${ArrayVar[@]}" echo 'Here is: echo "{${ArrayVar[@]}"' echo "${ArrayVar[@]}" echo echo '---Case6: Within double-quotes - IFS set and empty ' IFS='' echo 'Here is: printf %q "{${ArrayVar[*]}"' printf %q "${ArrayVar[*]}" echo echo 'Here is: printf %q "{${ArrayVar[@]}"' printf %q "${ArrayVar[@]}" echo echo 'Here is: echo "${ArrayVar[*]}"' echo "${ArrayVar[@]}" echo 'Here is: echo "{${ArrayVar[@]}"' echo "${ArrayVar[@]}" echo echo '---Case7: Within double-quotes - IFS is unset' unset IFS echo 'Here is: printf %q "{${ArrayVar[*]}"' printf %q "${ArrayVar[*]}" Appendix A. Contributed Scripts 733
- 740. Advanced Bash-Scripting Guide echo echo 'Here is: printf %q "{${ArrayVar[@]}"' printf %q "${ArrayVar[@]}" echo echo 'Here is: echo "${ArrayVar[*]}"' echo "${ArrayVar[@]}" echo 'Here is: echo "{${ArrayVar[@]}"' echo "${ArrayVar[@]}" echo echo '---End of Cases---' echo "========================================================="; echo # Put IFS back to the default. # Default is exactly these three bytes. IFS=$'x20'$'x09'$'x0A' # In exactly this order. # Interpretation of the above outputs: # A Glob-Pattern is I/O; the setting of IFS matters. ### # An All-Elements-Of does not consider IFS settings. ### # Note the different output using the echo command and the #+ quoted format operator of the printf command. # Recall: # Parameters are similar to arrays and have the similar behaviors. ### # The above examples demonstrate the possible variations. # To retain the shape of a sparse array, additional script #+ programming is required. ### # The source code of Bash has a routine to output the #+ [subscript]=value array assignment format. # As of version 2.05b, that routine is not used, #+ but that might change in future releases. # The length of a string, measured in non-null elements (characters): echo echo '- - Non-quoted references - -' echo 'Non-Null character count: '${#VarSomething}' characters.' # test='Lit'$'x00''eral' # $'x00' is a null character. # echo ${#test} # See that? # The length of an array, measured in defined elements, #+ including null content elements. echo echo 'Defined content count: '${#ArrayVar[@]}' elements.' # That is NOT the maximum subscript (4). # That is NOT the range of the subscripts (1 . . 4 inclusive). # It IS the length of the linked list. ### # Both the maximum subscript and the range of the subscripts may #+ be found with additional script programming. Appendix A. Contributed Scripts 734
- 741. Advanced Bash-Scripting Guide # The length of a string, measured in non-null elements (characters): echo echo '- - Quoted, Glob-Pattern references - -' echo 'Non-Null character count: '"${#VarSomething}"' characters.' # The length of an array, measured in defined elements, #+ including null-content elements. echo echo 'Defined element count: '"${#ArrayVar[*]}"' elements.' # Interpretation: Substitution does not effect the ${# ... } operation. # Suggestion: # Always use the All-Elements-Of character #+ if that is what is intended (independence from IFS). # Define a simple function. # I include an underscore in the name #+ to make it distinctive in the examples below. ### # Bash separates variable names and function names #+ in different namespaces. # The Mark-One eyeball isn't that advanced. ### _simple() { echo -n 'SimpleFunc'$@ # Newlines are swallowed in } #+ result returned in any case. # The ( ... ) notation invokes a command or function. # The $( ... ) notation is pronounced: Result-Of. # Invoke the function _simple echo echo '- - Output of function _simple - -' _simple # Try passing arguments. echo # or (_simple) # Try passing arguments. echo echo '- Is there a variable of that name? -' echo $_simple not defined # No variable by that name. # Invoke the result of function _simple (Error msg intended) ### $(_simple) # Gives an error message: # line 436: SimpleFunc: command not found # --------------------------------------- echo ### # The first word of the result of function _simple #+ is neither a valid Bash command nor the name of a defined function. ### # This demonstrates that the output of _simple is subject to evaluation. ### Appendix A. Contributed Scripts 735
- 742. Advanced Bash-Scripting Guide # Interpretation: # A function can be used to generate in-line Bash commands. # A simple function where the first word of result IS a bash command: ### _print() { echo -n 'printf %q '$@ } echo '- - Outputs of function _print - -' _print parm1 parm2 # An Output NOT A Command. echo $(_print parm1 parm2) # Executes: printf %q parm1 parm2 # See above IFS examples for the #+ various possibilities. echo $(_print $VarSomething) # The predictable result. echo # Function variables # ------------------ echo echo '- - Function variables - -' # A variable may represent a signed integer, a string or an array. # A string may be used like a function name with optional arguments. # set -vx # Enable if desired declare -f funcVar #+ in namespace of functions funcVar=_print # Contains name of function. $funcVar parm1 # Same as _print at this point. echo funcVar=$(_print ) # Contains result of function. $funcVar # No input, No output. $funcVar $VarSomething # The predictable result. echo funcVar=$(_print $VarSomething) # $VarSomething replaced HERE. $funcVar # The expansion is part of the echo #+ variable contents. funcVar="$(_print $VarSomething)" # $VarSomething replaced HERE. $funcVar # The expansion is part of the echo #+ variable contents. # The difference between the unquoted and the double-quoted versions #+ above can be seen in the "protect_literal.sh" example. # The first case above is processed as two, unquoted, Bash-Words. # The second case above is processed as one, quoted, Bash-Word. # Delayed replacement # ------------------- Appendix A. Contributed Scripts 736
- 743. Advanced Bash-Scripting Guide echo echo '- - Delayed replacement - -' funcVar="$(_print '$VarSomething')" # No replacement, single Bash-Word. eval $funcVar # $VarSomething replaced HERE. echo VarSomething='NewThing' eval $funcVar # $VarSomething replaced HERE. echo # Restore the original setting trashed above. VarSomething=Literal # There are a pair of functions demonstrated in the #+ "protect_literal.sh" and "unprotect_literal.sh" examples. # These are general purpose functions for delayed replacement literals #+ containing variables. # REVIEW: # ------ # A string can be considered a Classic-Array of elements (characters). # A string operation applies to all elements (characters) of the string #+ (in concept, anyway). ### # The notation: ${array_name[@]} represents all elements of the #+ Bash-Array: array_name. ### # The Extended-Syntax string operations can be applied to all #+ elements of an array. ### # This may be thought of as a For-Each operation on a vector of strings. ### # Parameters are similar to an array. # The initialization of a parameter array for a script #+ and a parameter array for a function only differ #+ in the initialization of ${0}, which never changes its setting. ### # Subscript zero of the script's parameter array contains #+ the name of the script. ### # Subscript zero of a function's parameter array DOES NOT contain #+ the name of the function. # The name of the current function is accessed by the $FUNCNAME variable. ### # A quick, review list follows (quick, not short). echo echo '- - Test (but not change) - -' echo '- null reference -' echo -n ${VarNull-'NotSet'}' ' # NotSet echo ${VarNull} # NewLine only echo -n ${VarNull:-'NotSet'}' ' # NotSet echo ${VarNull} # Newline only echo '- null contents -' echo -n ${VarEmpty-'Empty'}' ' # Only the space Appendix A. Contributed Scripts 737
- 744. Advanced Bash-Scripting Guide echo ${VarEmpty} # Newline only echo -n ${VarEmpty:-'Empty'}' ' # Empty echo ${VarEmpty} # Newline only echo '- contents -' echo ${VarSomething-'Content'} # Literal echo ${VarSomething:-'Content'} # Literal echo '- Sparse Array -' echo ${ArrayVar[@]-'not set'} # ASCII-Art time # State Y==yes, N==no # - :- # Unset Y Y ${# ... } == 0 # Empty N Y ${# ... } == 0 # Contents N N ${# ... } > 0 # Either the first and/or the second part of the tests #+ may be a command or a function invocation string. echo echo '- - Test 1 for undefined - -' declare -i t _decT() { t=$t-1 } # Null reference, set: t == -1 t=${#VarNull} # Results in zero. ${VarNull- _decT } # Function executes, t now -1. echo $t # Null contents, set: t == 0 t=${#VarEmpty} # Results in zero. ${VarEmpty- _decT } # _decT function NOT executed. echo $t # Contents, set: t == number of non-null characters VarSomething='_simple' # Set to valid function name. t=${#VarSomething} # non-zero length ${VarSomething- _decT } # Function _simple executed. echo $t # Note the Append-To action. # Exercise: clean up that example. unset t unset _decT VarSomething=Literal echo echo '- - Test and Change - -' echo '- Assignment if null reference -' echo -n ${VarNull='NotSet'}' ' # NotSet NotSet echo ${VarNull} unset VarNull echo '- Assignment if null reference -' echo -n ${VarNull:='NotSet'}' ' # NotSet NotSet echo ${VarNull} unset VarNull echo '- No assignment if null contents -' echo -n ${VarEmpty='Empty'}' ' # Space only Appendix A. Contributed Scripts 738
- 745. Advanced Bash-Scripting Guide echo ${VarEmpty} VarEmpty='' echo '- Assignment if null contents -' echo -n ${VarEmpty:='Empty'}' ' # Empty Empty echo ${VarEmpty} VarEmpty='' echo '- No change if already has contents -' echo ${VarSomething='Content'} # Literal echo ${VarSomething:='Content'} # Literal # "Subscript sparse" Bash-Arrays ### # Bash-Arrays are subscript packed, beginning with #+ subscript zero unless otherwise specified. ### # The initialization of ArrayVar was one way #+ to "otherwise specify". Here is the other way: ### echo declare -a ArraySparse ArraySparse=( [1]=one [2]='' [4]='four' ) # [0]=null reference, [2]=null content, [3]=null reference echo '- - Array-Sparse List - -' # Within double-quotes, default IFS, Glob-Pattern IFS=$'x20'$'x09'$'x0A' printf %q "${ArraySparse[*]}" echo # Note that the output does not distinguish between "null content" #+ and "null reference". # Both print as escaped whitespace. ### # Note also that the output does NOT contain escaped whitespace #+ for the "null reference(s)" prior to the first defined element. ### # This behavior of 2.04, 2.05a and 2.05b has been reported #+ and may change in a future version of Bash. # To output a sparse array and maintain the [subscript]=value #+ relationship without change requires a bit of programming. # One possible code fragment: ### # local l=${#ArraySparse[@]} # Count of defined elements # local f=0 # Count of found subscripts # local i=0 # Subscript to test ( # Anonymous in-line function for (( l=${#ArraySparse[@]}, f = 0, i = 0 ; f < l ; i++ )) do # 'if defined then...' ${ArraySparse[$i]+ eval echo ' ['$i']='${ArraySparse[$i]} ; (( f++ )) } done ) # The reader coming upon the above code fragment cold #+ might want to review "command lists" and "multiple commands on a line" #+ in the text of the foregoing "Advanced Bash Scripting Guide." ### Appendix A. Contributed Scripts 739
- 746. Advanced Bash-Scripting Guide # Note: # The "read -a array_name" version of the "read" command #+ begins filling array_name at subscript zero. # ArraySparse does not define a value at subscript zero. ### # The user needing to read/write a sparse array to either #+ external storage or a communications socket must invent #+ a read/write code pair suitable for their purpose. ### # Exercise: clean it up. unset ArraySparse echo echo '- - Conditional alternate (But not change)- -' echo '- No alternate if null reference -' echo -n ${VarNull+'NotSet'}' ' echo ${VarNull} unset VarNull echo '- No alternate if null reference -' echo -n ${VarNull:+'NotSet'}' ' echo ${VarNull} unset VarNull echo '- Alternate if null contents -' echo -n ${VarEmpty+'Empty'}' ' # Empty echo ${VarEmpty} VarEmpty='' echo '- No alternate if null contents -' echo -n ${VarEmpty:+'Empty'}' ' # Space only echo ${VarEmpty} VarEmpty='' echo '- Alternate if already has contents -' # Alternate literal echo -n ${VarSomething+'Content'}' ' # Content Literal echo ${VarSomething} # Invoke function echo -n ${VarSomething:+ $(_simple) }' ' # SimpleFunc Literal echo ${VarSomething} echo echo '- - Sparse Array - -' echo ${ArrayVar[@]+'Empty'} # An array of 'Empty'(ies) echo echo '- - Test 2 for undefined - -' declare -i t _incT() { t=$t+1 } # Note: # This is the same test used in the sparse array #+ listing code fragment. # Null reference, set: t == -1 Appendix A. Contributed Scripts 740
- 747. Advanced Bash-Scripting Guide t=${#VarNull}-1 # Results in minus-one. ${VarNull+ _incT } # Does not execute. echo $t' Null reference' # Null contents, set: t == 0 t=${#VarEmpty}-1 # Results in minus-one. ${VarEmpty+ _incT } # Executes. echo $t' Null content' # Contents, set: t == (number of non-null characters) t=${#VarSomething}-1 # non-null length minus-one ${VarSomething+ _incT } # Executes. echo $t' Contents' # Exercise: clean up that example. unset t unset _incT # ${name?err_msg} ${name:?err_msg} # These follow the same rules but always exit afterwards #+ if an action is specified following the question mark. # The action following the question mark may be a literal #+ or a function result. ### # ${name?} ${name:?} are test-only, the return can be tested. # Element operations # ------------------ echo echo '- - Trailing sub-element selection - -' # Strings, Arrays and Positional parameters # Call this script with multiple arguments #+ to see the parameter selections. echo '- All -' echo ${VarSomething:0} # all non-null characters echo ${ArrayVar[@]:0} # all elements with content echo ${@:0} # all parameters with content; # ignoring parameter[0] echo echo '- All after -' echo ${VarSomething:1} # all non-null after character[0] echo ${ArrayVar[@]:1} # all after element[0] with content echo ${@:2} # all after param[1] with content echo echo '- Range after -' echo ${VarSomething:4:3} # ral # Three characters after # character[3] echo '- Sparse array gotch -' echo ${ArrayVar[@]:1:2} # four - The only element with content. # Two elements after (if that many exist). # the FIRST WITH CONTENTS Appendix A. Contributed Scripts 741
- 748. Advanced Bash-Scripting Guide #+ (the FIRST WITH CONTENTS is being #+ considered as if it #+ were subscript zero). # Executed as if Bash considers ONLY array elements with CONTENT # printf %q "${ArrayVar[@]:0:3}" # Try this one # In versions 2.04, 2.05a and 2.05b, #+ Bash does not handle sparse arrays as expected using this notation. # # The current Bash maintainer, Chet Ramey, has corrected this. echo '- Non-sparse array -' echo ${@:2:2} # Two parameters following parameter[1] # New victims for string vector examples: stringZ=abcABC123ABCabc arrayZ=( abcabc ABCABC 123123 ABCABC abcabc ) sparseZ=( [1]='abcabc' [3]='ABCABC' [4]='' [5]='123123' ) echo echo ' - - Victim string - -'$stringZ'- - ' echo ' - - Victim array - -'${arrayZ[@]}'- - ' echo ' - - Sparse array - -'${sparseZ[@]}'- - ' echo ' - [0]==null ref, [2]==null ref, [4]==null content - ' echo ' - [1]=abcabc [3]=ABCABC [5]=123123 - ' echo ' - non-null-reference count: '${#sparseZ[@]}' elements' echo echo '- - Prefix sub-element removal - -' echo '- - Glob-Pattern match must include the first character. - -' echo '- - Glob-Pattern may be a literal or a function result. - -' echo # Function returning a simple, Literal, Glob-Pattern _abc() { echo -n 'abc' } echo '- Shortest prefix -' echo ${stringZ#123} # Unchanged (not a prefix). echo ${stringZ#$(_abc)} # ABC123ABCabc echo ${arrayZ[@]#abc} # Applied to each element. # echo ${sparseZ[@]#abc} # Version-2.05b core dumps. # Has since been fixed by Chet Ramey. # The -it would be nice- First-Subscript-Of # echo ${#sparseZ[@]#*} # This is NOT valid Bash. echo echo '- Longest prefix -' echo ${stringZ##1*3} # Unchanged (not a prefix) echo ${stringZ##a*C} # abc echo ${arrayZ[@]##a*c} # ABCABC 123123 ABCABC # echo ${sparseZ[@]##a*c} # Version-2.05b core dumps. # Has since been fixed by Chet Ramey. echo echo '- - Suffix sub-element removal - -' Appendix A. Contributed Scripts 742
- 749. Advanced Bash-Scripting Guide echo '- - Glob-Pattern match must include the last character. - -' echo '- - Glob-Pattern may be a literal or a function result. - -' echo echo '- Shortest suffix -' echo ${stringZ%1*3} # Unchanged (not a suffix). echo ${stringZ%$(_abc)} # abcABC123ABC echo ${arrayZ[@]%abc} # Applied to each element. # echo ${sparseZ[@]%abc} # Version-2.05b core dumps. # Has since been fixed by Chet Ramey. # The -it would be nice- Last-Subscript-Of # echo ${#sparseZ[@]%*} # This is NOT valid Bash. echo echo '- Longest suffix -' echo ${stringZ%%1*3} # Unchanged (not a suffix) echo ${stringZ%%b*c} # a echo ${arrayZ[@]%%b*c} # a ABCABC 123123 ABCABC a # echo ${sparseZ[@]%%b*c} # Version-2.05b core dumps. # Has since been fixed by Chet Ramey. echo echo '- - Sub-element replacement - -' echo '- - Sub-element at any location in string. - -' echo '- - First specification is a Glob-Pattern - -' echo '- - Glob-Pattern may be a literal or Glob-Pattern function result. - -' echo '- - Second specification may be a literal or function result. - -' echo '- - Second specification may be unspecified. Pronounce that' echo ' as: Replace-With-Nothing (Delete) - -' echo # Function returning a simple, Literal, Glob-Pattern _123() { echo -n '123' } echo '- Replace first occurrence -' echo ${stringZ/$(_123)/999} # Changed (123 is a component). echo ${stringZ/ABC/xyz} # xyzABC123ABCabc echo ${arrayZ[@]/ABC/xyz} # Applied to each element. echo ${sparseZ[@]/ABC/xyz} # Works as expected. echo echo '- Delete first occurrence -' echo ${stringZ/$(_123)/} echo ${stringZ/ABC/} echo ${arrayZ[@]/ABC/} echo ${sparseZ[@]/ABC/} # The replacement need not be a literal, #+ since the result of a function invocation is allowed. # This is general to all forms of replacement. echo echo '- Replace first occurrence with Result-Of -' echo ${stringZ/$(_123)/$(_simple)} # Works as expected. echo ${arrayZ[@]/ca/$(_simple)} # Applied to each element. echo ${sparseZ[@]/ca/$(_simple)} # Works as expected. Appendix A. Contributed Scripts 743
- 750. Advanced Bash-Scripting Guide echo echo '- Replace all occurrences -' echo ${stringZ//[b2]/X} # X-out b's and 2's echo ${stringZ//abc/xyz} # xyzABC123ABCxyz echo ${arrayZ[@]//abc/xyz} # Applied to each element. echo ${sparseZ[@]//abc/xyz} # Works as expected. echo echo '- Delete all occurrences -' echo ${stringZ//[b2]/} echo ${stringZ//abc/} echo ${arrayZ[@]//abc/} echo ${sparseZ[@]//abc/} echo echo '- - Prefix sub-element replacement - -' echo '- - Match must include the first character. - -' echo echo '- Replace prefix occurrences -' echo ${stringZ/#[b2]/X} # Unchanged (neither is a prefix). echo ${stringZ/#$(_abc)/XYZ} # XYZABC123ABCabc echo ${arrayZ[@]/#abc/XYZ} # Applied to each element. echo ${sparseZ[@]/#abc/XYZ} # Works as expected. echo echo '- Delete prefix occurrences -' echo ${stringZ/#[b2]/} echo ${stringZ/#$(_abc)/} echo ${arrayZ[@]/#abc/} echo ${sparseZ[@]/#abc/} echo echo '- - Suffix sub-element replacement - -' echo '- - Match must include the last character. - -' echo echo '- Replace suffix occurrences -' echo ${stringZ/%[b2]/X} # Unchanged (neither is a suffix). echo ${stringZ/%$(_abc)/XYZ} # abcABC123ABCXYZ echo ${arrayZ[@]/%abc/XYZ} # Applied to each element. echo ${sparseZ[@]/%abc/XYZ} # Works as expected. echo echo '- Delete suffix occurrences -' echo ${stringZ/%[b2]/} echo ${stringZ/%$(_abc)/} echo ${arrayZ[@]/%abc/} echo ${sparseZ[@]/%abc/} echo echo '- - Special cases of null Glob-Pattern - -' echo echo '- Prefix all -' # null substring pattern means 'prefix' echo ${stringZ/#/NEW} # NEWabcABC123ABCabc echo ${arrayZ[@]/#/NEW} # Applied to each element. echo ${sparseZ[@]/#/NEW} # Applied to null-content also. # That seems reasonable. echo Appendix A. Contributed Scripts 744
- 751. Advanced Bash-Scripting Guide echo '- Suffix all -' # null substring pattern means 'suffix' echo ${stringZ/%/NEW} # abcABC123ABCabcNEW echo ${arrayZ[@]/%/NEW} # Applied to each element. echo ${sparseZ[@]/%/NEW} # Applied to null-content also. # That seems reasonable. echo echo '- - Special case For-Each Glob-Pattern - -' echo '- - - - This is a nice-to-have dream - - - -' echo _GenFunc() { echo -n ${0} # Illustration only. # Actually, that would be an arbitrary computation. } # All occurrences, matching the AnyThing pattern. # Currently //*/ does not match null-content nor null-reference. # /#/ and /%/ does match null-content but not null-reference. echo ${sparseZ[@]//*/$(_GenFunc)} # A possible syntax would be to make #+ the parameter notation used within this construct mean: # ${1} - The full element # ${2} - The prefix, if any, to the matched sub-element # ${3} - The matched sub-element # ${4} - The suffix, if any, to the matched sub-element # # echo ${sparseZ[@]//*/$(_GenFunc ${3})} # Same as ${1} here. # Perhaps it will be implemented in a future version of Bash. exit 0 Appendix A. Contributed Scripts 745
- 752. Appendix B. Reference Cards The following reference cards provide a useful summary of certain scripting concepts. The foregoing text treats these matters in more depth, as well as giving usage examples. Table B-1. Special Shell Variables Variable Meaning $0 Filename of script $1 Positional parameter #1 $2 - $9 Positional parameters #2 - #9 ${10} Positional parameter #10 $# Number of positional parameters "$*" All the positional parameters (as a single word) * "$@" All the positional parameters (as separate strings) ${#*} Number of command-line parameters passed to script ${#@} Number of command-line parameters passed to script $? Return value $$ Process ID (PID) of script $- Flags passed to script (using set) $_ Last argument of previous command $! Process ID (PID) of last job run in background * Must be quoted, otherwise it defaults to "$@". Table B-2. TEST Operators: Binary Comparison Operator Meaning ----- Operator Meaning Arithmetic Comparison String Comparison -eq Equal to = Equal to == Equal to -ne Not equal to != Not equal to -lt Less than < Less than (ASCII) * -le Less than or equal to -gt Greater than > Greater than (ASCII) * -ge Greater than or equal to Appendix B. Reference Cards 746
- 753. Advanced Bash-Scripting Guide -z String is empty -n String is not empty Arithmetic Comparison within double parentheses (( ... )) > Greater than >= Greater than or equal to < Less than <= Less than or equal to * If within a double-bracket [[ ... ]] test construct, then no escape is needed. Table B-3. TEST Operators: Files Operator Tests Whether ----- Operator Tests Whether -e File exists -s File is not zero size -f File is a regular file -d File is a directory -r File has read permission -h File is a symbolic link -w File has write permission -L File is a symbolic link -x File has execute permission -b File is a block device -c File is a character device -g sgid flag set -p File is a pipe -u suid flag set -S File is a socket -k "sticky bit" set -t File is associated with a terminal -N File modified since it was last read F1 -nt F2 File F1 is newer than F2 * -O You own the file F1 -ot F2 File F1 is older than F2 * -G Group id of file same as yours F1 -ef F2 Files F1 and F2 are hard links to the same file * ! NOT (inverts sense of above tests) * Binary operator (requires two operands). Table B-4. Parameter Substitution and Expansion Expression Meaning ${var} Value of var, same as $var ${var-DEFAULT} If var not set, evaluate expression as $DEFAULT * ${var:-DEFAULT} If var not set or is empty, evaluate expression as $DEFAULT * Appendix B. Reference Cards 747
- 754. Advanced Bash-Scripting Guide ${var=DEFAULT} If var not set, evaluate expression as $DEFAULT * ${var:=DEFAULT} If var not set, evaluate expression as $DEFAULT * ${var+OTHER} If var set, evaluate expression as $OTHER, otherwise as null string ${var:+OTHER} If var set, evaluate expression as $OTHER, otherwise as null string ${var?ERR_MSG} If var not set, print $ERR_MSG * ${var:?ERR_MSG} If var not set, print $ERR_MSG * ${!varprefix*} Matches all previously declared variables beginning with varprefix ${!varprefix@} Matches all previously declared variables beginning with varprefix * Of course if var is set, evaluate the expression as $var. Table B-5. String Operations Expression Meaning ${#string} Length of $string ${string:position} Extract substring from $string at $position ${string:position:length} Extract $length characters substring from $string at $position ${string#substring} Strip shortest match of $substring from front of $string ${string##substring} Strip longest match of $substring from front of $string ${string%substring} Strip shortest match of $substring from back of $string ${string%%substring} Strip longest match of $substring from back of $string ${string/substring/replacement} Replace first match of $substring with $replacement ${string//substring/replacement} Replace all matches of $substring with $replacement ${string/#substring/replacement} If $substring matches front end of $string, substitute $replacement for $substring ${string/%substring/replacement} If $substring matches back end of $string, substitute $replacement for $substring expr match "$string" '$substring' Length of matching $substring* at beginning of Appendix B. Reference Cards 748
- 755. Advanced Bash-Scripting Guide $string expr "$string" : '$substring' Length of matching $substring* at beginning of $string expr index "$string" $substring Numerical position in $string of first character in $substring that matches expr substr $string $position Extract $length characters from $string starting $length at $position expr match "$string" Extract $substring* at beginning of $string '($substring)' expr "$string" : '($substring)' Extract $substring* at beginning of $string expr match "$string" Extract $substring* at end of $string '.*($substring)' expr "$string" : '.*($substring)' Extract $substring* at end of $string * Where $substring is a Regular Expression. Table B-6. Miscellaneous Constructs Expression Interpretation Brackets if [ CONDITION ] Test construct if [[ CONDITION ]] Extended test construct Array[1]=element1 Array initialization [a-z] Range of characters within a Regular Expression Curly Brackets ${variable} Parameter substitution ${!variable} Indirect variable reference { command1; command2; . . . commandN; } Block of code {string1,string2,string3,...} Brace expansion {a..z} Extended brace expansion {} Text replacement, after find and xargs Parentheses ( command1; command2 ) Command group executed within a subshell Array=(element1 element2 element3) Array initialization result=$(COMMAND) Command substitution, new style >(COMMAND) Process substitution <(COMMAND) Process substitution Double Parentheses Appendix B. Reference Cards 749
- 756. Advanced Bash-Scripting Guide (( var = 78 )) Integer arithmetic var=$(( 20 + 5 )) Integer arithmetic, with variable assignment (( var++ )) C-style variable increment (( var-- )) C-style variable decrement (( var0 = var1<98?9:21 )) C-style trinary operation Quoting "$variable" "Weak" quoting 'string' 'Strong' quoting Back Quotes result=`COMMAND` Command substitution, classic style Appendix B. Reference Cards 750
- 757. Appendix C. A Sed and Awk Micro-Primer This is a very brief introduction to the sed and awk text processing utilities. We will deal with only a few basic commands here, but that will suffice for understanding simple sed and awk constructs within shell scripts. sed: a non-interactive text file editor awk: a field-oriented pattern processing language with a C-style syntax For all their differences, the two utilities share a similar invocation syntax, use regular expressions , read input by default from stdin, and output to stdout. These are well-behaved UNIX tools, and they work together well. The output from one can be piped to the other, and their combined capabilities give shell scripts some of the power of Perl. One important difference between the utilities is that while shell scripts can easily pass arguments to sed, it is more complicated for awk (see Example 33-5 and Example 9-25). C.1. Sed Sed is a non-interactive [130] stream editor. It receives text input, whether from stdin or from a file, performs certain operations on specified lines of the input, one line at a time, then outputs the result to stdout or to a file. Within a shell script, sed is usually one of several tool components in a pipe. Sed determines which lines of its input that it will operate on from the address range passed to it. [131] Specify this address range either by line number or by a pattern to match. For example, 3d signals sed to delete line 3 of the input, and /Windows/d tells sed that you want every line of the input containing a match to "Windows" deleted. Of all the operations in the sed toolkit, we will focus primarily on the three most commonly used ones. These are printing (to stdout), deletion, and substitution. Table C-1. Basic sed operators Operator Effect Name [address-range]/p print Print [specified address range] [address-range]/d delete Delete [specified address range] s/pattern1/pattern2/ substitute Substitute pattern2 for first instance of pattern1 in a line [address-range]/s/pattern1/pattern2/ substitute Substitute pattern2 for first instance of pattern1 in a line, over address-range [address-range]/y/pattern1/pattern2/ transform replace any character in pattern1 with the corresponding character in pattern2, over address-range (equivalent of tr) Appendix C. A Sed and Awk Micro-Primer 751
- 758. Advanced Bash-Scripting Guide g global Operate on every pattern match within each matched line of input Unless the g (global) operator is appended to a substitute command, the substitution operates only on the first instance of a pattern match within each line. From the command-line and in a shell script, a sed operation may require quoting and certain options. sed -e '/^$/d' $filename # The -e option causes the next string to be interpreted as an editing instruction. # (If passing only a single instruction to sed, the "-e" is optional.) # The "strong" quotes ('') protect the RE characters in the instruction #+ from reinterpretation as special characters by the body of the script. # (This reserves RE expansion of the instruction for sed.) # # Operates on the text contained in file $filename. In certain cases, a sed editing command will not work with single quotes. filename=file1.txt pattern=BEGIN sed "/^$pattern/d" "$filename" # Works as specified. # sed '/^$pattern/d' "$filename" has unexpected results. # In this instance, with strong quoting (' ... '), #+ "$pattern" will not expand to "BEGIN". Sed uses the -e option to specify that the following string is an instruction or set of instructions. If there is only a single instruction contained in the string, then this may be omitted. sed -n '/xzy/p' $filename # The -n option tells sed to print only those lines matching the pattern. # Otherwise all input lines would print. # The -e option not necessary here since there is only a single editing instruction. Table C-2. Examples of sed operators Notation Effect 8d Delete 8th line of input. /^$/d Delete all blank lines. 1,/^$/d Delete from beginning of input up to, and including first blank line. /Jones/p Print only lines containing "Jones" (with -n option). s/Windows/Linux/ Substitute "Linux" for first instance of "Windows" found in each input line. s/BSOD/stability/g Substitute "stability" for every instance of "BSOD" found in each input line. s/ *$// Delete all spaces at the end of every line. s/00*/0/g Compress all consecutive sequences of zeroes into a single zero. /GUI/d Delete all lines containing "GUI". s/GUI//g Delete all instances of "GUI", leaving the remainder of each line intact. Substituting a zero-length string for another is equivalent to deleting that string within a line of input. This leaves the remainder of the line intact. Applying s/GUI// to the line Appendix C. A Sed and Awk Micro-Primer 752
- 759. Advanced Bash-Scripting Guide The most important parts of any application are its GUI and sound effects results in The most important parts of any application are its and sound effects A backslash forces the sed replacement command to continue on to the next line. This has the effect of using the newline at the end of the first line as the replacement string. s/^ */ /g This substitution replaces line-beginning spaces with a newline. The net result is to replace paragraph indents with a blank line between paragraphs. An address range followed by one or more operations may require open and closed curly brackets, with appropriate newlines. /[0-9A-Za-z]/,/^$/{ /^$/d } This deletes only the first of each set of consecutive blank lines. That might be useful for single-spacing a text file, but retaining the blank line(s) between paragraphs. The usual delimiter that sed uses is /. However, sed allows other delimiters, such as %. This is useful when / is part of a replacement string, as in a file pathname. See Example 10-9 and Example 15-32. A quick way to double-space a text file is sed G filename. For illustrative examples of sed within shell scripts, see: 1. Example 33-1 2. Example 33-2 3. Example 15-3 4. Example A-2 5. Example 15-17 6. Example 15-27 7. Example A-12 8. Example A-16 9. Example A-17 10. Example 15-32 11. Example 10-9 12. Example 15-48 13. Example A-1 14. Example 15-14 15. Example 15-12 16. Example A-10 17. Example 18-12 18. Example 15-19 19. Example A-29 20. Example A-31 21. Example A-24 22. Example A-43 For a more extensive treatment of sed, check the appropriate references in the Bibliography. Appendix C. A Sed and Awk Micro-Primer 753
- 760. Advanced Bash-Scripting Guide C.2. Awk Awk [132] is a full-featured text processing language with a syntax reminiscent of C. While it possesses an extensive set of operators and capabilities, we will cover only a few of these here - the ones most useful in shell scripts. Awk breaks each line of input passed to it into fields. By default, a field is a string of consecutive characters delimited by whitespace, though there are options for changing this. Awk parses and operates on each separate field. This makes it ideal for handling structured text files -- especially tables -- data organized into consistent chunks, such as rows and columns. Strong quoting and curly brackets enclose blocks of awk code within a shell script. # $1 is field #1, $2 is field #2, etc. echo one two | awk '{print $1}' # one echo one two | awk '{print $2}' # two # But what is field #0 ($0)? echo one two | awk '{print $0}' # one two # All the fields! awk '{print $3}' $filename # Prints field #3 of file $filename to stdout. awk '{print $1 $5 $6}' $filename # Prints fields #1, #5, and #6 of file $filename. awk '{print $0}' $filename # Prints the entire file! # Same effect as: cat $filename . . . or . . . sed '' $filename We have just seen the awk print command in action. The only other feature of awk we need to deal with here is variables. Awk handles variables similarly to shell scripts, though a bit more flexibly. { total += ${column_number} } This adds the value of column_number to the running total of total>. Finally, to print "total", there is an END command block, executed after the script has processed all its input. END { print total } Corresponding to the END, there is a BEGIN, for a code block to be performed before awk starts processing its input. The following example illustrates how awk can add text-parsing tools to a shell script. Example C-1. Counting Letter Occurrences #! /bin/sh Appendix C. A Sed and Awk Micro-Primer 754
- 761. Advanced Bash-Scripting Guide # letter-count2.sh: Counting letter occurrences in a text file. # # Script by nyal [nyal@voila.fr]. # Used in ABS Guide with permission. # Recommented and reformatted by ABS Guide author. # Version 1.1: Modified to work with gawk 3.1.3. # (Will still work with earlier versions.) INIT_TAB_AWK="" # Parameter to initialize awk script. count_case=0 FILE_PARSE=$1 E_PARAMERR=85 usage() { echo "Usage: letter-count.sh file letters" 2>&1 # For example: ./letter-count2.sh filename.txt a b c exit $E_PARAMERR # Too few arguments passed to script. } if [ ! -f "$1" ] ; then echo "$1: No such file." 2>&1 usage # Print usage message and exit. fi if [ -z "$2" ] ; then echo "$2: No letters specified." 2>&1 usage fi shift # Letters specified. for letter in `echo $@` # For each one . . . do INIT_TAB_AWK="$INIT_TAB_AWK tab_search[${count_case}] = "$letter"; final_tab[${count_case}] = 0; " # Pass as parameter to awk script below. count_case=`expr $count_case + 1` done # DEBUG: # echo $INIT_TAB_AWK; cat $FILE_PARSE | # Pipe the target file to the following awk script. # --------------------------------------------------------------------- # Earlier version of script: # awk -v tab_search=0 -v final_tab=0 -v tab=0 -v # nb_letter=0 -v chara=0 -v chara2=0 awk "BEGIN { $INIT_TAB_AWK } { split($0, tab, ""); for (chara in tab) { for (chara2 in tab_search) { if (tab_search[chara2] == tab[chara]) { final_tab[chara2]++ } } } } END { for (chara in final_tab) { print tab_search[chara] " => " final_tab[chara] } }" # --------------------------------------------------------------------- Appendix C. A Sed and Awk Micro-Primer 755
- 762. Advanced Bash-Scripting Guide # Nothing all that complicated, just . . . #+ for-loops, if-tests, and a couple of specialized functions. exit $? # Compare this script to letter-count.sh. For simpler examples of awk within shell scripts, see: 1. Example 14-14 2. Example 19-8 3. Example 15-32 4. Example 33-5 5. Example 9-25 6. Example 14-20 7. Example 27-3 8. Example 27-4 9. Example 10-3 10. Example 15-60 11. Example 9-31 12. Example 15-4 13. Example 9-15 14. Example 33-17 15. Example 10-8 16. Example 33-4 17. Example 15-53 That's all the awk we'll cover here, folks, but there's lots more to learn. See the appropriate references in the Bibliography. Appendix C. A Sed and Awk Micro-Primer 756
- 763. Appendix D. Exit Codes With Special Meanings Table D-1. Reserved Exit Codes Exit Code Meaning Example Comments Number 1 Catchall for general errors let "var1 = 1/0" Miscellaneous errors, such as "divide by zero" and other impermissible operations 2 Misuse of shell builtins (according empty_function() {} Seldom seen, usually defaults to Bash documentation) to exit code 1 126 Command invoked cannot execute Permission problem or command is not an executable 127 "command not found" illegal_command Possible problem with $PATH or a typo 128 Invalid argument to exit exit 3.14159 exit takes only integer args in the range 0 - 255 (see first footnote) 128+n Fatal error signal "n" kill -9 $PPID of script $? returns 137 (128 + 9) 130 Script terminated by Control-C Control-C is fatal error signal 2, (130 = 128 + 2, see above) 255* Exit status out of range exit -1 exit takes only integer args in the range 0 - 255 According to the above table, exit codes 1 - 2, 126 - 165, and 255 [133] have special meanings, and should therefore be avoided for user-specified exit parameters. Ending a script with exit 127 would certainly cause confusion when troubleshooting (is the error code a "command not found" or a user-defined one?). However, many scripts use an exit 1 as a general bailout-upon-error. Since exit code 1 signifies so many possible errors, it is not particularly useful in debugging. There has been an attempt to systematize exit status numbers (see /usr/include/sysexits.h), but this is intended for C and C++ programmers. A similar standard for scripting might be appropriate. The author of this document proposes restricting user-defined exit codes to the range 64 - 113 (in addition to 0, for success), to conform with the C/C++ standard. This would allot 50 valid codes, and make troubleshooting scripts more straightforward. [134] All user-defined exit codes in the accompanying examples to this document conform to this standard, except where overriding circumstances exist, as in Example 9-2. Issuing a $? from the command-line after a shell script exits gives results consistent with the table above only from the Bash or sh prompt. Running the C-shell or tcsh may give different values in some cases. Appendix D. Exit Codes With Special Meanings 757
- 764. Appendix E. A Detailed Introduction to I/O and I/O Redirection written by Stéphane Chazelas, and revised by the document author A command expects the first three file descriptors to be available. The first, fd 0 (standard input, stdin), is for reading. The other two (fd 1, stdout and fd 2, stderr) are for writing. There is a stdin, stdout, and a stderr associated with each command. ls 2>&1 means temporarily connecting the stderr of the ls command to the same "resource" as the shell's stdout. By convention, a command reads its input from fd 0 (stdin), prints normal output to fd 1 (stdout), and error ouput to fd 2 (stderr). If one of those three fd's is not open, you may encounter problems: bash$ cat /etc/passwd >&- cat: standard output: Bad file descriptor For example, when xterm runs, it first initializes itself. Before running the user's shell, xterm opens the terminal device (/dev/pts/<n> or something similar) three times. At this point, Bash inherits these three file descriptors, and each command (child process) run by Bash inherits them in turn, except when you redirect the command. Redirection means reassigning one of the file descriptors to another file (or a pipe, or anything permissible). File descriptors may be reassigned locally (for a command, a command group, a subshell, a while or if or case or for loop...), or globally, for the remainder of the shell (using exec). ls > /dev/null means running ls with its fd 1 connected to /dev/null. bash$ lsof -a -p $$ -d0,1,2 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME bash 363 bozo 0u CHR 136,1 3 /dev/pts/1 bash 363 bozo 1u CHR 136,1 3 /dev/pts/1 bash 363 bozo 2u CHR 136,1 3 /dev/pts/1 bash$ exec 2> /dev/null bash$ lsof -a -p $$ -d0,1,2 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME bash 371 bozo 0u CHR 136,1 3 /dev/pts/1 bash 371 bozo 1u CHR 136,1 3 /dev/pts/1 bash 371 bozo 2w CHR 1,3 120 /dev/null bash$ bash -c 'lsof -a -p $$ -d0,1,2' | cat COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME lsof 379 root 0u CHR 136,1 3 /dev/pts/1 lsof 379 root 1w FIFO 0,0 7118 pipe lsof 379 root 2u CHR 136,1 3 /dev/pts/1 bash$ echo "$(bash -c 'lsof -a -p $$ -d0,1,2' 2>&1)" COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME lsof 426 root 0u CHR 136,1 3 /dev/pts/1 Appendix E. A Detailed Introduction to I/O and I/O Redirection 758
- 765. Advanced Bash-Scripting Guide lsof 426 root 1w FIFO 0,0 7520 pipe lsof 426 root 2w FIFO 0,0 7520 pipe This works for different types of redirection. Exercise: Analyze the following script. #! /usr/bin/env bash mkfifo /tmp/fifo1 /tmp/fifo2 while read a; do echo "FIFO1: $a"; done < /tmp/fifo1 & exec 7> /tmp/fifo1 exec 8> >(while read a; do echo "FD8: $a, to fd7"; done >&7) exec 3>&1 ( ( ( while read a; do echo "FIFO2: $a"; done < /tmp/fifo2 | tee /dev/stderr | tee /dev/fd/4 | tee /dev/fd/5 | tee /dev/fd/6 >&7 & exec 3> /tmp/fifo2 echo 1st, to stdout sleep 1 echo 2nd, to stderr >&2 sleep 1 echo 3rd, to fd 3 >&3 sleep 1 echo 4th, to fd 4 >&4 sleep 1 echo 5th, to fd 5 >&5 sleep 1 echo 6th, through a pipe | sed 's/.*/PIPE: &, to fd 5/' >&5 sleep 1 echo 7th, to fd 6 >&6 sleep 1 echo 8th, to fd 7 >&7 sleep 1 echo 9th, to fd 8 >&8 ) 4>&1 >&3 3>&- | while read a; do echo "FD4: $a"; done 1>&3 5>&- 6>&- ) 5>&1 >&3 | while read a; do echo "FD5: $a"; done 1>&3 6>&- ) 6>&1 >&3 | while read a; do echo "FD6: $a"; done 3>&- rm -f /tmp/fifo1 /tmp/fifo2 # For each command and subshell, figure out which fd points to what. # Good luck! exit 0 Appendix E. A Detailed Introduction to I/O and I/O Redirection 759
- 766. Appendix F. Command-Line Options Many executables, whether binaries or script files, accept options to modify their run-time behavior. For example: from the command-line, typing command -o would invoke command, with option o. F.1. Standard Command-Line Options Over time, there has evolved a loose standard for the meanings of command-line option flags. The GNU utilities conform more closely to this "standard" than older UNIX utilities. Traditionally, UNIX command-line options consist of a dash, followed by one or more lowercase letters. The GNU utilities added a double-dash, followed by a complete word or compound word. The two most widely-accepted options are: • -h --help Help: Give usage message and exit. • -v --version Version: Show program version and exit. Other common options are: • -a --all All: show all information or operate on all arguments. • -l --list List: list files or arguments without taking other action. • -o Output filename • -q --quiet Quiet: suppress stdout. • -r -R Appendix F. Command-Line Options 760
- 767. Advanced Bash-Scripting Guide --recursive Recursive: Operate recursively (down directory tree). • -v --verbose Verbose: output additional information to stdout or stderr. • -z --compress Compress: apply compression (usually gzip). However: • In tar and gawk: -f --file File: filename follows. • In cp, mv, rm: -f --force Force: force overwrite of target file(s). Many UNIX and Linux utilities deviate from this "standard," so it is dangerous to assume that a given option will behave in a standard way. Always check the man page for the command in question when in doubt. A complete table of recommended options for the GNU utilities is available at the GNU standards page. F.2. Bash Command-Line Options Bash itself has a number of command-line options. Here are some of the more useful ones. • -c Read commands from the following string and assign any arguments to the positional parameters. bash$ bash -c 'set a b c d; IFS="+-;"; echo "$*"' a+b+c+d • -r Appendix F. Command-Line Options 761
- 768. Advanced Bash-Scripting Guide --restricted Runs the shell, or a script, in restricted mode. • --posix Forces Bash to conform to POSIX mode. • --version Display Bash version information and exit. • -- End of options. Anything further on the command line is an argument, not an option. Appendix F. Command-Line Options 762
- 769. Appendix G. Important Files startup files These files contain the aliases and environmental variables made available to Bash running as a user shell and to all Bash scripts invoked after system initialization. /etc/profile Systemwide defaults, mostly setting the environment (all Bourne-type shells, not just Bash [135]) /etc/bashrc systemwide functions and aliases for Bash $HOME/.bash_profile user-specific Bash environmental default settings, found in each user's home directory (the local counterpart to /etc/profile) $HOME/.bashrc user-specific Bash init file, found in each user's home directory (the local counterpart to /etc/bashrc). Only interactive shells and user scripts read this file. See Appendix L for a sample .bashrc file. logout file $HOME/.bash_logout user-specific instruction file, found in each user's home directory. Upon exit from a login (Bash) shell, the commands in this file execute. data files /etc/passwd A listing of all the user accounts on the system, their identities, their home directories, the groups they belong to, and their default shell. Note that the user passwords are not stored in this file, [136] but in /etc/shadow in encrypted form. system configuration files /etc/sysconfig/hwconf Listing and description of attached hardware devices. This information is in text form and can be extracted and parsed. bash$ grep -A 5 AUDIO /etc/sysconfig/hwconf class: AUDIO bus: PCI detached: 0 driver: snd-intel8x0 desc: "Intel Corporation 82801CA/CAM AC'97 Audio Controller" vendorId: 8086 This file is present on Red Hat and Fedora Core installations, but may be missing from other distros. Appendix G. Important Files 763
- 770. Appendix H. Important System Directories Sysadmins and anyone else writing administrative scripts should be intimately familiar with the following system directories. • /bin Binaries (executables). Basic system programs and utilities (such as bash). • /usr/bin [137] More system binaries. • /usr/local/bin Miscellaneous binaries local to the particular machine. • /sbin System binaries. Basic system administrative programs and utilities (such as fsck). • /usr/sbin More system administrative programs and utilities. • /etc Et cetera. Systemwide configuration scripts. Of particular interest are the /etc/fstab (filesystem table), /etc/mtab (mounted filesystem table), and the /etc/inittab files. • /etc/rc.d Boot scripts, on Red Hat and derivative distributions of Linux. • /usr/share/doc Documentation for installed packages. • /usr/man The systemwide manpages. • /dev Device directory. Entries (but not mount points) for physical and virtual devices. See Chapter 27. • /proc Process directory. Contains information and statistics about running processes and kernel parameters. See Chapter 27. • /sys Systemwide device directory. Contains information and statistics about device and device names. This is newly added to Linux with the 2.6.X kernels. • /mnt Mount. Directory for mounting hard drive partitions, such as /mnt/dos, and physical devices. In newer Linux distros, the /media directory has taken over as the preferred mount point for I/O Appendix H. Important System Directories 764
- 771. Advanced Bash-Scripting Guide devices. • /media In newer Linux distros, the preferred mount point for I/O devices, such as CD/DVD drives or USB flash drives. • /var Variable (changeable) system files. This is a catchall "scratchpad" directory for data generated while a Linux/UNIX machine is running. • /var/log Systemwide log files. • /var/spool/mail User mail spool. • /lib Systemwide library files. • /usr/lib More systemwide library files. • /tmp System temporary files. • /boot System boot directory. The kernel, module links, system map, and boot manager reside here. Altering files in this directory may result in an unbootable system. Appendix H. Important System Directories 765
- 772. Appendix I. An Introduction to Programmable Completion The programmable completion feature in Bash permits typing a partial command, then pressing the [Tab] key to auto-complete the command sequence. [138] If multiple completions are possible, then [Tab] lists them all. Let's see how it works. bash$ xtra[Tab] xtraceroute xtrapin xtrapproto xtraceroute.real xtrapinfo xtrapreset xtrapchar xtrapout xtrapstats bash$ xtrac[Tab] xtraceroute xtraceroute.real bash$ xtraceroute.r[Tab] xtraceroute.real Tab completion also works for variables and path names. bash$ echo $BASH[Tab] $BASH $BASH_COMPLETION $BASH_SUBSHELL $BASH_ARGC $BASH_COMPLETION_DIR $BASH_VERSINFO $BASH_ARGV $BASH_LINENO $BASH_VERSION $BASH_COMMAND $BASH_SOURCE bash$ echo /usr/local/[Tab] bin/ etc/ include/ libexec/ sbin/ src/ doc/ games/ lib/ man/ share/ The Bash complete and compgen builtins make it possible for tab completion to recognize partial parameters and options to commands. In a very simple case, we can use complete from the command-line to specify a short list of acceptable parameters. bash$ touch sample_command bash$ touch file1.txt file2.txt file2.doc file30.txt file4.zzz bash$ chmod +x sample_command bash$ complete -f -X '!*.txt' sample_command bash$ ./sample[Tab][Tab] sample_command file1.txt file2.txt file30.txt The -f option to complete specifies filenames, and -X the filter pattern. For anything more complex, we could write a script that specifies a list of acceptable command-line parameters. The compgen builtin expands a list of arguments to generate completion matches. Appendix I. An Introduction to Programmable Completion 766
- 773. Advanced Bash-Scripting Guide Let us take a modified version of the UseGetOpt.sh script as an example command. This script accepts a number of command-line parameters, preceded by either a single or double dash. And here is the corresponding completion script, by convention given a filename corresponding to its associated command. Example I-1. Completion script for UseGetOpt.sh # file: UseGetOpt-2 # UseGetOpt-2.sh parameter-completion _UseGetOpt-2 () # By convention, the function name { #+ starts with an underscore. local cur # Pointer to current completion word. # By convention, it's named "cur" but this isn't strictly necessary. COMPREPLY=() # Array variable storing the possible completions. cur=${COMP_WORDS[COMP_CWORD]} case "$cur" in -*) COMPREPLY=( $( compgen -W '-a -d -f -l -t -h --aoption --debug --file --log --test --help --' -- $cur ) );; # Generate the completion matches and load them into $COMPREPLY array. # xx) May add more cases here. # yy) # zz) esac return 0 } complete -F _UseGetOpt-2 -o filenames ./UseGetOpt-2.sh # ^^ ^^^^^^^^^^^^ Invokes the function _UseGetOpt-2. Now, let's try it. bash$ source UseGetOpt-2 bash$ ./UseGetOpt-2.sh -[Tab] -- --aoption --debug --file --help --log --test -a -d -f -h -l -t bash$ ./UseGetOpt-2.sh --[Tab] -- --aoption --debug --file --help --log --test We begin by sourcing the "completion script." This sets the command-line parameters. [139] In the first instance, hitting [Tab] after a single dash, the output is all the possible parameters preceded by one or more dashes. Hitting [Tab] after two dashes gives the possible parameters preceded by two or more dashes. Now, just what is the point of having to jump through flaming hoops to enable command-line tab completion? It saves keystrokes. [140] -- Resources: Appendix I. An Introduction to Programmable Completion 767
- 774. Advanced Bash-Scripting Guide Bash programmable completion project Mitch Frazier's Linux Journal article, More on Using the Bash Complete Command Steve's excellent two-part article, "An Introduction to Bash Completion": Part 1 and Part 2 Appendix I. An Introduction to Programmable Completion 768
- 775. Appendix J. Localization Localization is an undocumented Bash feature. A localized shell script echoes its text output in the language defined as the system's locale. A Linux user in Berlin, Germany, would get script output in German, whereas his cousin in Berlin, Maryland, would get output from the same script in English. To create a localized script, use the following template to write all messages to the user (error messages, prompts, etc.). #!/bin/bash # localized.sh # Script by Stéphane Chazelas, #+ modified by Bruno Haible, bugfixed by Alfredo Pironti. . gettext.sh E_CDERROR=65 error() { printf "$@" >&2 exit $E_CDERROR } cd $var || error "`eval_gettext "Can't cd to $var."`" # The triple backslashes (escapes) in front of $var needed #+ "because eval_gettext expects a string #+ where the variable values have not yet been substituted." # -- per Bruno Haible read -p "`gettext "Enter the value: "`" var # ... # ------------------------------------------------------------------ # Alfredo Pironti comments: # This script has been modified to not use the $"..." syntax in #+ favor of the "`gettext "..."`" syntax. # This is ok, but with the new localized.sh program, the commands #+ "bash -D filename" and "bash --dump-po-string filename" #+ will produce no output #+ (because those command are only searching for the $"..." strings)! # The ONLY way to extract strings from the new file is to use the # 'xgettext' program. However, the xgettext program is buggy. # Note that 'xgettext' has another bug. # # The shell fragment: # gettext -s "I like Bash" # will be correctly extracted, but . . . # xgettext -s "I like Bash" # . . . fails! # 'xgettext' will extract "-s" because #+ the command only extracts the #+ very first argument after the 'gettext' word. Appendix J. Localization 769
- 776. Advanced Bash-Scripting Guide # Escape characters: # # To localize a sentence like # echo -e "Hellotworld!" #+ you must use # echo -e "`gettext "Hellotworld"`" # The "double escape character" before the `t' is needed because #+ 'gettext' will search for a string like: 'Hellotworld' # This is because gettext will read one literal `') #+ and will output a string like "Bonjourtmonde", #+ so the 'echo' command will display the message correctly. # # You may not use # echo "`gettext -e "Hellotworld"`" #+ due to the xgettext bug explained above. # Let's localize the following shell fragment: # echo "-h display help and exit" # # First, one could do this: # echo "`gettext "-h display help and exit"`" # This way 'xgettext' will work ok, #+ but the 'gettext' program will read "-h" as an option! # # One solution could be # echo "`gettext -- "-h display help and exit"`" # This way 'gettext' will work, #+ but 'xgettext' will extract "--", as referred to above. # # The workaround you may use to get this string localized is # echo -e "`gettext "0-h display help and exit"`" # We have added a 0 (NULL) at the beginning of the sentence. # This way 'gettext' works correctly, as does 'xgettext.' # Moreover, the NULL character won't change the behavior #+ of the 'echo' command. # ------------------------------------------------------------------ bash$ bash -D localized.sh "Can't cd to %s." "Enter the value: " This lists all the localized text. (The -D option lists double-quoted strings prefixed by a $, without executing the script.) bash$ bash --dump-po-strings localized.sh #: a:6 msgid "Can't cd to %s." msgstr "" #: a:7 msgid "Enter the value: " msgstr "" The --dump-po-strings option to Bash resembles the -D option, but uses gettext "po" format. Bruno Haible points out: Starting with gettext-0.12.2, xgettext -o - localized.sh is recommended instead of bash --dump-po-strings localized.sh, because xgettext . . . Appendix J. Localization 770
- 777. Advanced Bash-Scripting Guide 1. understands the gettext and eval_gettext commands (whereas bash --dump-po-strings understands only its deprecated $"..." syntax) 2. can extract comments placed by the programmer, intended to be read by the translator. This shell code is then not specific to Bash any more; it works the same way with Bash 1.x and other /bin/sh implementations. Now, build a language.po file for each language that the script will be translated into, specifying the msgstr. Alfredo Pironti gives the following example: fr.po: #: a:6 msgid "Can't cd to $var." msgstr "Impossible de se positionner dans le repertoire $var." #: a:7 msgid "Enter the value: " msgstr "Entrez la valeur : " # The string are dumped with the variable names, not with the %s syntax, #+ similar to C programs. #+ This is a very cool feature if the programmer uses #+ variable names that make sense! Then, run msgfmt. msgfmt -o localized.sh.mo fr.po Place the resulting localized.sh.mo file in the /usr/local/share/locale/fr/LC_MESSAGES directory, and at the beginning of the script, insert the lines: TEXTDOMAINDIR=/usr/local/share/locale TEXTDOMAIN=localized.sh If a user on a French system runs the script, she will get French messages. With older versions of Bash or other shells, localization requires gettext, using the -s option. In this case, the script becomes: #!/bin/bash # localized.sh E_CDERROR=65 error() { local format=$1 shift printf "$(gettext -s "$format")" "$@" >&2 exit $E_CDERROR } cd $var || error "Can't cd to %s." "$var" read -p "$(gettext -s "Enter the value: ")" var # ... The TEXTDOMAIN and TEXTDOMAINDIR variables need to be set and exported to the environment. This should be done within the script itself. Appendix J. Localization 771
- 778. Advanced Bash-Scripting Guide --- This appendix written by Stéphane Chazelas, with modifications suggested by Alfredo Pironti, and by Bruno Haible, maintainer of GNU gettext. Appendix J. Localization 772
- 779. Appendix K. History Commands The Bash shell provides command-line tools for editing and manipulating a user's command history. This is primarily a convenience, a means of saving keystrokes. Bash history commands: 1. history 2. fc bash$ history 1 mount /mnt/cdrom 2 cd /mnt/cdrom 3 ls ... Internal variables associated with Bash history commands: 1. $HISTCMD 2. $HISTCONTROL 3. $HISTIGNORE 4. $HISTFILE 5. $HISTFILESIZE 6. $HISTSIZE 7. $HISTTIMEFORMAT (Bash, ver. 3.0 or later) 8. !! 9. !$ 10. !# 11. !N 12. !-N 13. !STRING 14. !?STRING? 15. ^STRING^string^ Unfortunately, the Bash history tools find no use in scripting. #!/bin/bash # history.sh # A (vain) attempt to use the 'history' command in a script. history # No output. var=$(history); echo "$var" # $var is empty. # History commands disabled within a script. bash$ ./history.sh (no output) The Advancing in the Bash Shell site gives a good introduction to the use of history commands in Bash. Appendix K. History Commands 773
- 780. Appendix L. A Sample .bashrc File The ~/.bashrc file determines the behavior of interactive shells. A good look at this file can lead to a better understanding of Bash. Emmanuel Rouat contributed the following very elaborate .bashrc file, written for a Linux system. He welcomes reader feedback on it. Study the file carefully, and feel free to reuse code snippets and functions from it in your own .bashrc file or even in your scripts. Example L-1. Sample .bashrc file #============================================================= # # PERSONAL $HOME/.bashrc FILE for bash-3.0 (or later) # By Emmanuel Rouat <no-email> # # Last modified: Sun Nov 30 16:27:45 CET 2008 # This file is read (normally) by interactive shells only. # Here is the place to define your aliases, functions and # other interactive features like your prompt. # # The majority of the code here assumes you are on a GNU # system (most likely a Linux box) and is based on code found # on Usenet or internet. See for instance: # # http://tldp.org/LDP/abs/html/index.html # http://www.caliban.org/bash/ # http://www.shelldorado.com/scripts/categories.html # http://www.dotfiles.org/ # # This bashrc file is a bit overcrowded -- remember it is just # just an example. Tailor it to your needs. # # #============================================================= # --> Comments added by HOWTO author. #------------------------------------------------------------- # Source global definitions (if any) #------------------------------------------------------------- if [ -f /etc/bashrc ]; then . /etc/bashrc # --> Read /etc/bashrc, if present. fi #------------------------------------------------------------- # Automatic setting of $DISPLAY (if not set already). # This works for linux - your mileage may vary. ... # The problem is that different types of terminals give # different answers to 'who am i' (rxvt in particular can be # troublesome). # I have not found a 'universal' method yet. Appendix L. A Sample .bashrc File 774
- 781. Advanced Bash-Scripting Guide #------------------------------------------------------------- function get_xserver () { case $TERM in xterm ) XSERVER=$(who am i | awk '{print $NF}' | tr -d ')''(' ) # Ane-Pieter Wieringa suggests the following alternative: # I_AM=$(who am i) # SERVER=${I_AM#*(} # SERVER=${SERVER%*)} XSERVER=${XSERVER%%:*} ;; aterm | rxvt) # Find some code that works here. ... ;; esac } if [ -z ${DISPLAY:=""} ]; then get_xserver if [[ -z ${XSERVER} || ${XSERVER} == $(hostname) || ${XSERVER} == "unix" ]]; then DISPLAY=":0.0" # Display on local host. else DISPLAY=${XSERVER}:0.0 # Display on remote host. fi fi export DISPLAY #------------------------------------------------------------- # Some settings #------------------------------------------------------------- ulimit -S -c 0 # Don't want any coredumps. set -o notify set -o noclobber set -o ignoreeof set -o nounset #set -o xtrace # Useful for debuging. # Enable options: shopt -s cdspell shopt -s cdable_vars shopt -s checkhash shopt -s checkwinsize shopt -s sourcepath shopt -s no_empty_cmd_completion shopt -s cmdhist shopt -s histappend histreedit histverify shopt -s extglob # Necessary for programmable completion. # Disable options: shopt -u mailwarn unset MAILCHECK # Don't want my shell to warn me of incoming mail. export TIMEFORMAT=$'nreal %3Rtuser %3Utsys %3Stpcpu %Pn' export HISTTIMEFORMAT="%H:%M > " export HISTIGNORE="&:bg:fg:ll:h" Appendix L. A Sample .bashrc File 775
- 782. Advanced Bash-Scripting Guide export HOSTFILE=$HOME/.hosts # Put list of remote hosts in ~/.hosts ... #------------------------------------------------------------- # Greeting, motd etc... #------------------------------------------------------------- # Define some colors first: red='e[0;31m' RED='e[1;31m' blue='e[0;34m' BLUE='e[1;34m' cyan='e[0;36m' CYAN='e[1;36m' NC='e[0m' # No Color # --> Nice. Has the same effect as using "ansi.sys" in DOS. # Looks best on a terminal with black background..... echo -e "${CYAN}This is BASH ${RED}${BASH_VERSION%.*} ${CYAN} - DISPLAY on ${RED}$DISPLAY${NC}n" date if [ -x /usr/games/fortune ]; then /usr/games/fortune -s # Makes our day a bit more fun.... :-) fi function _exit() # Function to run upon exit of shell. { echo -e "${RED}Hasta la vista, baby${NC}" } trap _exit EXIT #------------------------------------------------------------- # Shell Prompt #------------------------------------------------------------- if [[ "${DISPLAY%%:0*}" != "" ]]; then HILIT=${red} # remote machine: prompt will be partly red else HILIT=${cyan} # local machine: prompt will be partly cyan fi # --> Replace instances of W with w in prompt functions below #+ --> to get display of full path name. function fastprompt() { unset PROMPT_COMMAND case $TERM in *term | rxvt ) PS1="${HILIT}[h]$NC W > [033]0;${TERM} [u@h] w007]" ;; linux ) PS1="${HILIT}[h]$NC W > " ;; *) PS1="[h] W > " ;; esac } Appendix L. A Sample .bashrc File 776
- 783. Advanced Bash-Scripting Guide _powerprompt() { LOAD=$(uptime|sed -e "s/.*: ([^,]*).*/1/" -e "s/ //g") } function powerprompt() { PROMPT_COMMAND=_powerprompt case $TERM in *term | rxvt ) PS1="${HILIT}[A - $LOAD]$NCn[u@h #] W > [033]0;${TERM} [u@h] w007]" ;; linux ) PS1="${HILIT}[A - $LOAD]$NCn[u@h #] W > " ;; * ) PS1="[A - $LOAD]n[u@h #] W > " ;; esac } powerprompt # This is the default prompt -- might be slow. # If too slow, use fastprompt instead. ... #=============================================================== # # ALIASES AND FUNCTIONS # # Arguably, some functions defined here are quite big. # If you want to make this file smaller, these functions can # be converted into scripts and removed from here. # # Many functions were taken (almost) straight from the bash-2.04 # examples. # #=============================================================== #------------------- # Personnal Aliases #------------------- alias rm='rm -i' alias cp='cp -i' alias mv='mv -i' # -> Prevents accidentally clobbering files. alias mkdir='mkdir -p' alias h='history' alias j='jobs -l' alias which='type -a' alias ..='cd ..' alias path='echo -e ${PATH//:/n}' alias libpath='echo -e ${LD_LIBRARY_PATH//:/n}' alias print='/usr/bin/lp -o nobanner -d $LPDEST' # Assumes LPDEST is defined (default printer) alias pjet='enscript -h -G -fCourier9 -d $LPDEST' # Pretty-print using enscript alias du='du -kh' # Makes a more readable output. alias df='df -kTh' #------------------------------------------------------------- # The 'ls' family (this assumes you use a recent GNU ls) Appendix L. A Sample .bashrc File 777
- 784. Advanced Bash-Scripting Guide #------------------------------------------------------------- alias ll="ls -l --group-directories-first" alias ls='ls -hF --color' # add colors for filetype recognition alias la='ls -Al' # show hidden files alias lx='ls -lXB' # sort by extension alias lk='ls -lSr' # sort by size, biggest last alias lc='ls -ltcr' # sort by and show change time, most recent last alias lu='ls -ltur' # sort by and show access time, most recent last alias lt='ls -ltr' # sort by date, most recent last alias lm='ls -al |more' # pipe through 'more' alias lr='ls -lR' # recursive ls alias tree='tree -Csu' # nice alternative to 'recursive ls' # If your version of 'ls' doesn't support --group-directories-first try this: # function ll(){ ls -l "$@"| egrep "^d" ; ls -lXB "$@" 2>&-| # egrep -v "^d|total "; } #------------------------------------------------------------- # tailoring 'less' #------------------------------------------------------------- alias more='less' export PAGER=less export LESSCHARSET='latin1' export LESSOPEN='|/usr/bin/lesspipe.sh %s 2>&-' # Use this if lesspipe.sh exists export LESS='-i -N -w -z-4 -g -e -M -X -F -R -P%t?f%f :stdin .?pb%pb%:?lbLine %lb:?bbByte %bb:-...' #------------------------------------------------------------- # spelling typos - highly personnal and keyboard-dependent :-) #------------------------------------------------------------- alias xs='cd' alias vf='cd' alias moer='more' alias moew='more' alias kk='ll' #------------------------------------------------------------- # A few fun ones #------------------------------------------------------------- function xtitle() # Adds some text in the terminal frame. { case "$TERM" in *term | rxvt) echo -n -e "033]0;$*007" ;; *) ;; esac } # aliases that use xtitle alias top='xtitle Processes on $HOST && top' alias make='xtitle Making $(basename $PWD) ; make' alias ncftp="xtitle ncFTP ; ncftp" Appendix L. A Sample .bashrc File 778
- 785. Advanced Bash-Scripting Guide # .. and functions function man() { for i ; do xtitle The $(basename $1|tr -d .[:digit:]) manual command man -F -a "$i" done } #------------------------------------------------------------- # Make the following commands run in background automatically: #------------------------------------------------------------- function te() # Wrapper around xemacs/gnuserv ... { if [ "$(gnuclient -batch -eval t 2>&-)" == "t" ]; then gnuclient -q "$@"; else ( xemacs "$@" &); fi } function soffice() { command soffice "$@" & } function firefox() { command firefox "$@" & } function xpdf() { command xpdf "$@" & } #------------------------------------------------------------- # File & string-related functions: #------------------------------------------------------------- # Find a file with a pattern in name: function ff() { find . -type f -iname '*'$*'*' -ls ; } # Find a file with pattern $1 in name and Execute $2 on it: function fe() { find . -type f -iname '*'${1:-}'*' -exec ${2:-file} {} ; ; } # Find a pattern in a set of files and highlight them: # (needs a recent version of egrep) function fstr() { OPTIND=1 local case="" local usage="fstr: find string in files. Usage: fstr [-i] "pattern" ["filename pattern"] " while getopts :it opt do case "$opt" in i) case="-i " ;; *) echo "$usage"; return;; esac done shift $(( $OPTIND - 1 )) if [ "$#" -lt 1 ]; then echo "$usage" return; fi find . -type f -name "${2:-*}" -print0 | xargs -0 egrep --color=always -sn ${case} "$1" 2>&- | more Appendix L. A Sample .bashrc File 779
- 786. Advanced Bash-Scripting Guide } function cuttail() # cut last n lines in file, 10 by default { nlines=${2:-10} sed -n -e :a -e "1,${nlines}!{P;N;D;};N;ba" $1 } function lowercase() # move filenames to lowercase { for file ; do filename=${file##*/} case "$filename" in */*) dirname==${file%/*} ;; *) dirname=.;; esac nf=$(echo $filename | tr A-Z a-z) newname="${dirname}/${nf}" if [ "$nf" != "$filename" ]; then mv "$file" "$newname" echo "lowercase: $file --> $newname" else echo "lowercase: $file not changed." fi done } function swap() # Swap 2 filenames around, if they exist { #(from Uzi's bashrc). local TMPFILE=tmp.$$ [ $# -ne 2 ] && echo "swap: 2 arguments needed" && return 1 [ ! -e $1 ] && echo "swap: $1 does not exist" && return 1 [ ! -e $2 ] && echo "swap: $2 does not exist" && return 1 mv "$1" $TMPFILE mv "$2" "$1" mv $TMPFILE "$2" } function extract() # Handy Extract Program. { if [ -f $1 ] ; then case $1 in *.tar.bz2) tar xvjf $1 ;; *.tar.gz) tar xvzf $1 ;; *.bz2) bunzip2 $1 ;; *.rar) unrar x $1 ;; *.gz) gunzip $1 ;; *.tar) tar xvf $1 ;; *.tbz2) tar xvjf $1 ;; *.tgz) tar xvzf $1 ;; *.zip) unzip $1 ;; *.Z) uncompress $1 ;; *.7z) 7z x $1 ;; *) echo "'$1' cannot be extracted via >extract<" ;; esac else echo "'$1' is not a valid file" fi Appendix L. A Sample .bashrc File 780
- 787. Advanced Bash-Scripting Guide } #------------------------------------------------------------- # Process/system related functions: #------------------------------------------------------------- function my_ps() { ps $@ -u $USER -o pid,%cpu,%mem,bsdtime,command ; } function pp() { my_ps f | awk '!/awk/ && $0~var' var=${1:-".*"} ; } function killps() # Kill by process name. { local pid pname sig="-TERM" # Default signal. if [ "$#" -lt 1 ] || [ "$#" -gt 2 ]; then echo "Usage: killps [-SIGNAL] pattern" return; fi if [ $# = 2 ]; then sig=$1 ; fi for pid in $(my_ps| awk '!/awk/ && $0~pat { print $1 }' pat=${!#} ) ; do pname=$(my_ps | awk '$1~var { print $5 }' var=$pid ) if ask "Kill process $pid <$pname> with signal $sig?" then kill $sig $pid fi done } function my_ip() # Get IP adresses. { MY_IP=$(/sbin/ifconfig ppp0 | awk '/inet/ { print $2 } ' | sed -e s/addr://) MY_ISP=$(/sbin/ifconfig ppp0 | awk '/P-t-P/ { print $3 } ' | sed -e s/P-t-P://) } function ii() # Get current host related info. { echo -e "nYou are logged on ${RED}$HOST" echo -e "nAdditionnal information:$NC " ; uname -a echo -e "n${RED}Users logged on:$NC " ; w -h echo -e "n${RED}Current date :$NC " ; date echo -e "n${RED}Machine stats :$NC " ; uptime echo -e "n${RED}Memory stats :$NC " ; free my_ip 2>&- ; echo -e "n${RED}Local IP Address :$NC" ; echo ${MY_IP:-"Not connected"} echo -e "n${RED}ISP Address :$NC" ; echo ${MY_ISP:-"Not connected"} echo -e "n${RED}Open connections :$NC "; netstat -pan --inet; echo } #------------------------------------------------------------- # Misc utilities: #------------------------------------------------------------- function repeat() # Repeat n times command. { local i max max=$1; shift; for ((i=1; i <= max ; i++)); do # --> C-like syntax eval "$@"; done } Appendix L. A Sample .bashrc File 781
- 788. Advanced Bash-Scripting Guide function ask() # See 'killps' for example of use. { echo -n "$@" '[y/n] ' ; read ans case "$ans" in y*|Y*) return 0 ;; *) return 1 ;; esac } function corename() # Get name of app that created a corefile. { for file ; do echo -n $file : ; gdb --core=$file --batch | head -1 done } #========================================================================= # PROGRAMMABLE COMPLETION - ONLY SINCE BASH-2.04 # Most are taken from the bash 2.05 documentation and from Ian McDonald's # 'Bash completion' package (http://www.caliban.org/bash/#completion). # You will in fact need bash more recent than 3.0 for some features. #========================================================================= if [ "${BASH_VERSION%.*}" < "3.0" ]; then echo "You will need to upgrade to version 3.0 for full programmable completion features." return fi shopt -s extglob # Necessary, #set +o nounset # otherwise some completions will fail. complete -A hostname rsh rcp telnet rlogin r ftp ping disk complete -A export printenv complete -A variable export local readonly unset complete -A enabled builtin complete -A alias alias unalias complete -A function function complete -A user su mail finger complete -A helptopic help # Currently, same as builtins. complete -A shopt shopt complete -A stopped -P '%' bg complete -A job -P '%' fg jobs disown complete -A directory mkdir rmdir complete -A directory -o default cd # Compression complete -f -o default -X '*.+(zip|ZIP)' zip complete -f -o default -X '!*.+(zip|ZIP)' unzip complete -f -o default -X '*.+(z|Z)' compress complete -f -o default -X '!*.+(z|Z)' uncompress complete -f -o default -X '*.+(gz|GZ)' gzip complete -f -o default -X '!*.+(gz|GZ)' gunzip complete -f -o default -X '*.+(bz2|BZ2)' bzip2 complete -f -o default -X '!*.+(bz2|BZ2)' bunzip2 Appendix L. A Sample .bashrc File 782
- 789. Advanced Bash-Scripting Guide complete -f -o default -X '!*.+(zip|ZIP|z|Z|gz|GZ|bz2|BZ2)' extract # Documents - Postscript,pdf,dvi..... complete -f -o default -X '!*.+(ps|PS)' gs ghostview ps2pdf ps2ascii complete -f -o default -X '!*.+(dvi|DVI)' dvips dvipdf xdvi dviselect dvitype complete -f -o default -X '!*.+(pdf|PDF)' acroread pdf2ps complete -f -o default -X '!*.@(@(?(e)ps|?(E)PS|pdf|PDF)?(.gz|.GZ|.bz2|.BZ2|.Z))' gv ggv complete -f -o default -X '!*.texi*' makeinfo texi2dvi texi2html texi2pdf complete -f -o default -X '!*.tex' tex latex slitex complete -f -o default -X '!*.lyx' lyx complete -f -o default -X '!*.+(htm*|HTM*)' lynx html2ps complete -f -o default -X '!*.+(doc|DOC|xls|XLS|ppt|PPT|sx?|SX?|csv|CSV|od?|OD?|ott|OTT)' soffice # Multimedia complete -f -o default -X '!*.+(gif|GIF|jp*g|JP*G|bmp|BMP|xpm|XPM|png|PNG)' xv gimp ee gqview complete -f -o default -X '!*.+(mp3|MP3)' mpg123 mpg321 complete -f -o default -X '!*.+(ogg|OGG)' ogg123 complete -f -o default -X '!*.@(mp[23]|MP[23]|ogg|OGG|wav|WAV|pls|m3u|xm|mod|s[3t]m|it|mtm|ult|flac)' xmms complete -f -o default -X '!*.@(mp?(e)g|MP?(E)G|wma|avi|AVI|asf|vob|VOB|bin|dat|vcd| ps|pes|fli|viv|rm|ram|yuv|mov|MOV|qt|QT|wmv|mp3|MP3|ogg|OGG| ogm|OGM|mp4|MP4|wav|WAV|asx|ASX)' xine complete -f -o default -X '!*.pl' perl perl5 # This is a 'universal' completion function - it works when commands have # a so-called 'long options' mode , ie: 'ls --all' instead of 'ls -a' # Needs the '-o' option of grep # (try the commented-out version if not available). # First, remove '=' from completion word separators # (this will allow completions like 'ls --color=auto' to work correctly). COMP_WORDBREAKS=${COMP_WORDBREAKS/=/} _get_longopts() { #$1 --help | sed -e '/--/!d' -e 's/.*--([^[:space:].,]*).*/--1/'| #grep ^"$2" |sort -u ; $1 --help | grep -o -e "--[^[:space:].,]*" | grep -e "$2" |sort -u } _longopts() { local cur cur=${COMP_WORDS[COMP_CWORD]} case "${cur:-*}" in -*) ;; *) return ;; esac case "$1" in Appendix L. A Sample .bashrc File 783
- 790. Advanced Bash-Scripting Guide ~*) eval cmd="$1" ;; *) cmd="$1" ;; esac COMPREPLY=( $(_get_longopts ${1} ${cur} ) ) } complete -o default -F _longopts configure bash complete -o default -F _longopts wget id info a2ps ls recode _tar() { local cur ext regex tar untar COMPREPLY=() cur=${COMP_WORDS[COMP_CWORD]} # If we want an option, return the possible long options. case "$cur" in -*) COMPREPLY=( $(_get_longopts $1 $cur ) ); return 0;; esac if [ $COMP_CWORD -eq 1 ]; then COMPREPLY=( $( compgen -W 'c t x u r d A' -- $cur ) ) return 0 fi case "${COMP_WORDS[1]}" in ?(-)c*f) COMPREPLY=( $( compgen -f $cur ) ) return 0 ;; +([^Izjy])f) ext='tar' regex=$ext ;; *z*f) ext='tar.gz' regex='t(ar.)(gz|Z)' ;; *[Ijy]*f) ext='t?(ar.)bz?(2)' regex='t(ar.)bz2?' ;; *) COMPREPLY=( $( compgen -f $cur ) ) return 0 ;; esac if [[ "$COMP_LINE" == tar*.$ext' '* ]]; then # Complete on files in tar file. # # Get name of tar file from command line. tar=$( echo "$COMP_LINE" | sed -e 's|^.* ([^ ]*'$regex') .*$|1|' ) # Devise how to untar and list it. untar=t${COMP_WORDS[1]//[^Izjyf]/} COMPREPLY=( $( compgen -W "$( echo $( tar $untar $tar 2>/dev/null ) )" -- "$cur" ) ) return 0 Appendix L. A Sample .bashrc File 784
- 791. Advanced Bash-Scripting Guide else # File completion on relevant files. COMPREPLY=( $( compgen -G $cur*.$ext ) ) fi return 0 } complete -F _tar -o default tar _make() { local mdef makef makef_dir="." makef_inc gcmd cur prev i; COMPREPLY=(); cur=${COMP_WORDS[COMP_CWORD]}; prev=${COMP_WORDS[COMP_CWORD-1]}; case "$prev" in -*f) COMPREPLY=($(compgen -f $cur )); return 0 ;; esac; case "$cur" in -*) COMPREPLY=($(_get_longopts $1 $cur )); return 0 ;; esac; # make reads `GNUmakefile', then `makefile', then `Makefile' if [ -f ${makef_dir}/GNUmakefile ]; then makef=${makef_dir}/GNUmakefile elif [ -f ${makef_dir}/makefile ]; then makef=${makef_dir}/makefile elif [ -f ${makef_dir}/Makefile ]; then makef=${makef_dir}/Makefile else makef=${makef_dir}/*.mk # Local convention. fi # Before we scan for targets, see if a Makefile name was # specified with -f ... for (( i=0; i < ${#COMP_WORDS[@]}; i++ )); do if [[ ${COMP_WORDS[i]} == -f ]]; then # eval for tilde expansion eval makef=${COMP_WORDS[i+1]} break fi done [ ! -f $makef ] && return 0 # deal with included Makefiles makef_inc=$( grep -E '^-?include' $makef | sed -e "s,^.* ,"$makef_dir"/," ) for file in $makef_inc; do [ -f $file ] && makef="$makef $file" done Appendix L. A Sample .bashrc File 785
- 792. Advanced Bash-Scripting Guide # If we have a partial word to complete, restrict completions to # matches of that word. if [ -n "$cur" ]; then gcmd='grep "^$cur"' ; else gcmd=cat ; fi COMPREPLY=( $( awk -F':' '/^[a-zA-Z0-9][^$#/t=]*:([^=]|$)/ {split($1,A,/ /);for(i in A)print A[i]}' $makef 2>/dev/null | eval $gcmd )) } complete -F _make -X '+($*|*.[cho])' make gmake pmake _killall() { local cur prev COMPREPLY=() cur=${COMP_WORDS[COMP_CWORD]} # get a list of processes (the first sed evaluation # takes care of swapped out processes, the second # takes care of getting the basename of the process) COMPREPLY=( $( /usr/bin/ps -u $USER -o comm | sed -e '1,1d' -e 's#[][]##g' -e 's#^.*/##'| awk '{if ($0 ~ /^'$cur'/) print $0}' )) return 0 } complete -F _killall killall killps # A meta-command completion function for commands like sudo(8), which need to # first complete on a command, then complete according to that command's own # completion definition - currently not quite foolproof, # but still quite useful (By Ian McDonald, modified by me). _meta_comp() { local cur func cline cspec COMPREPLY=() cur=${COMP_WORDS[COMP_CWORD]} cmdline=${COMP_WORDS[@]} if [ $COMP_CWORD = 1 ]; then COMPREPLY=( $( compgen -c $cur ) ) else cmd=${COMP_WORDS[1]} # Find command. cspec=$( complete -p ${cmd} ) # Find spec of that command. # COMP_CWORD and COMP_WORDS() are not read-only, # so we can set them before handing off to regular # completion routine: # Get current command line minus initial command, cline="${COMP_LINE#$1 }" # split current command line tokens into array, COMP_WORDS=( $cline ) # set current token number to 1 less than now. Appendix L. A Sample .bashrc File 786
- 793. Advanced Bash-Scripting Guide COMP_CWORD=$(( $COMP_CWORD - 1 )) # If current arg is empty, add it to COMP_WORDS array # (otherwise that information will be lost). if [ -z $cur ]; then COMP_WORDS[COMP_CWORD]="" ; fi if [ "${cspec%%-F *}" != "${cspec}" ]; then # if -F then get function: func=${cspec#*-F } func=${func%% *} eval $func $cline # Evaluate it. else func=$( echo $cspec | sed -e 's/^complete//' -e 's/[^ ]*$//' ) COMPREPLY=( $( eval compgen $func $cur ) ) fi fi } complete -o default -F _meta_comp nohup eval exec trace truss strace sotruss gdb complete -o default -F _meta_comp command type which man nice time # Local Variables: # mode:shell-script # sh-shell:bash # End: Appendix L. A Sample .bashrc File 787
- 794. Appendix M. Converting DOS Batch Files to Shell Scripts Quite a number of programmers learned scripting on a PC running DOS. Even the crippled DOS batch file language allowed writing some fairly powerful scripts and applications, though they often required extensive kludges and workarounds. Occasionally, the need still arises to convert an old DOS batch file to a UNIX shell script. This is generally not difficult, as DOS batch file operators are only a limited subset of the equivalent shell scripting ones. Table M-1. Batch file keywords / variables / operators, and their shell equivalents Batch File Operator Shell Script Equivalent Meaning % $ command-line parameter prefix / - command option flag / directory path separator == = (equal-to) string comparison test !==! != (not equal-to) string comparison test | | pipe @ set +v do not echo current command * * filename "wild card" > > file redirection (overwrite) >> >> file redirection (append) < < redirect stdin %VAR% $VAR environmental variable REM # comment NOT ! negate following test NUL /dev/null "black hole" for burying command output ECHO echo echo (many more option in Bash) ECHO. echo echo blank line ECHO OFF set +v do not echo command(s) following FOR %%VAR IN (LIST) DO for var in [list]; do "for" loop :LABEL none (unnecessary) label GOTO none (use a function) jump to another location in the script PAUSE sleep pause or wait an interval CHOICE case or select menu choice IF if if-test Appendix M. Converting DOS Batch Files to Shell Scripts 788
- 795. Advanced Bash-Scripting Guide IF EXIST FILENAME if [ -e filename ] test if file exists IF !%N==! if [ -z "$N" ] if replaceable parameter "N" not present CALL source or . (dot operator) "include" another script COMMAND /C source or . (dot operator) "include" another script (same as CALL) SET export set an environmental variable SHIFT shift left shift command-line argument list SGN -lt or -gt sign (of integer) ERRORLEVEL $? exit status CON stdin "console" (stdin) PRN /dev/lp0 (generic) printer device LPT1 /dev/lp0 first printer device COM1 /dev/ttyS0 first serial port Batch files usually contain DOS commands. These must be translated into their UNIX equivalents in order to convert a batch file into a shell script. Table M-2. DOS commands and their UNIX equivalents DOS Command UNIX Equivalent Effect ASSIGN ln link file or directory ATTRIB chmod change file permissions CD cd change directory CHDIR cd change directory CLS clear clear screen COMP diff, comm, cmp file compare COPY cp file copy Ctl-C Ctl-C break (signal) Ctl-Z Ctl-D EOF (end-of-file) DEL rm delete file(s) DELTREE rm -rf delete directory recursively DIR ls -l directory listing ERASE rm delete file(s) EXIT exit exit current process FC comm, cmp file compare FIND grep find strings in files MD mkdir make directory Appendix M. Converting DOS Batch Files to Shell Scripts 789
- 796. Advanced Bash-Scripting Guide MKDIR mkdir make directory MORE more text file paging filter MOVE mv move PATH $PATH path to executables REN mv rename (move) RENAME mv rename (move) RD rmdir remove directory RMDIR rmdir remove directory SORT sort sort file TIME date display system time TYPE cat output file to stdout XCOPY cp (extended) file copy Virtually all UNIX and shell operators and commands have many more options and enhancements than their DOS and batch file counterparts. Many DOS batch files rely on auxiliary utilities, such as ask.com, a crippled counterpart to read. DOS supports only a very limited and incompatible subset of filename wild-card expansion, recognizing just the * and ? characters. Converting a DOS batch file into a shell script is generally straightforward, and the result ofttimes reads better than the original. Example M-1. VIEWDATA.BAT: DOS Batch File REM VIEWDATA REM INSPIRED BY AN EXAMPLE IN "DOS POWERTOOLS" REM BY PAUL SOMERSON @ECHO OFF IF !%1==! GOTO VIEWDATA REM IF NO COMMAND-LINE ARG... FIND "%1" C:BOZOBOOKLIST.TXT GOTO EXIT0 REM PRINT LINE WITH STRING MATCH, THEN EXIT. :VIEWDATA TYPE C:BOZOBOOKLIST.TXT | MORE REM SHOW ENTIRE FILE, 1 PAGE AT A TIME. :EXIT0 The script conversion is somewhat of an improvement. [141] Appendix M. Converting DOS Batch Files to Shell Scripts 790
- 797. Advanced Bash-Scripting Guide Example M-2. viewdata.sh: Shell Script Conversion of VIEWDATA.BAT #!/bin/bash # viewdata.sh # Conversion of VIEWDATA.BAT to shell script. DATAFILE=/home/bozo/datafiles/book-collection.data ARGNO=1 # @ECHO OFF Command unnecessary here. if [ $# -lt "$ARGNO" ] # IF !%1==! GOTO VIEWDATA then less $DATAFILE # TYPE C:MYDIRBOOKLIST.TXT | MORE else grep "$1" $DATAFILE # FIND "%1" C:MYDIRBOOKLIST.TXT fi exit 0 # :EXIT0 # GOTOs, labels, smoke-and-mirrors, and flimflam unnecessary. # The converted script is short, sweet, and clean, #+ which is more than can be said for the original. Ted Davis' Shell Scripts on the PC site has a set of comprehensive tutorials on the old-fashioned art of batch file programming. Certain of his ingenious techniques could conceivably have relevance for shell scripts. Appendix M. Converting DOS Batch Files to Shell Scripts 791
- 798. Appendix N. Exercises The exercises that follow test and extend your knowledge of scripting. Think of them as a challenge, as an entertaining way to take you further along the stony path toward UNIX wizardry. On a dingy side street in a run-down section of Hoboken, New Jersey, there sits a nondescript squat two-story brick building with an inscriptio incised on a marble plate in its wall: Bash Scripting Hall of Fame. Inside, among various dusty uninteresting exhibits is a corroding, cobweb-festooned brass plaque inscribed with a short, very short list of those few persons who have successfully mastered the material in the Advanced Bash Scripting Guide, as evidenced by their performance on the following Exercise sections. (Alas, the author of the ABS Guide is not represented among the exhibits. This is possibly due to malicious rumors about lack of credentials and deficient scripting skills.) N.1. Analyzing Scripts Examine the following script. Run it, then explain what it does. Annotate the script and rewrite it in a more compact and elegant manner. #!/bin/bash MAX=10000 for((nr=1; nr<$MAX; nr++)) do let "t1 = nr % 5" if [ "$t1" -ne 3 ] then continue fi let "t2 = nr % 7" if [ "$t2" -ne 4 ] then continue fi let "t3 = nr % 9" if [ "$t3" -ne 5 ] then Appendix N. Exercises 792
- 799. Advanced Bash-Scripting Guide continue fi break # What happens when you comment out this line? Why? done echo "Number = $nr" exit 0 --- Explain what the following script does. It is really just a parameterized command-line pipe. #!/bin/bash DIRNAME=/usr/bin FILETYPE="shell script" LOGFILE=logfile file "$DIRNAME"/* | fgrep "$FILETYPE" | tee $LOGFILE | wc -l exit 0 --- Examine and explain the following script. For hints, you might refer to the listings for find and stat. #!/bin/bash # Author: Nathan Coulter # This code is released to the public domain. # The author gave permission to use this code snippet in the ABS Guide. find -maxdepth 1 -type f -printf '%f000' | { while read -d $'000'; do mv "$REPLY" "$(date -d "$(stat -c '%y' "$REPLY") " '+%Y%m%d%H%M%S' )-$REPLY" done } # Warning: Test-drive this script in a "scratch" directory. # It will somehow affect all the files there. --- A reader sent in the following code snippet. while read LINE do echo $LINE done < `tail -f /var/log/messages` He wished to write a script tracking changes to the system log file, /var/log/messages. Unfortunately, the above code block hangs and does nothing useful. Why? Fix this so it does work. (Hint: rather than redirecting the stdin of the loop, try a pipe.) --- Appendix N. Exercises 793
- 800. Advanced Bash-Scripting Guide Analyze the following "one-liner" (here split into two lines for clarity) contributed by Rory Winston: export SUM=0; for f in $(find src -name "*.java"); do export SUM=$(($SUM + $(wc -l $f | awk '{ print $1 }'))); done; echo $SUM Hint: First, break the script up into bite-sized sections. Then, carefully examine its use of double-parentheses arithmetic, the export command, the find command, the wc command, and awk. --- Analyze Example A-10, and reorganize it in a simplified and more logical style. See how many of the variables can be eliminated, and try to optimize the script to speed up its execution time. Alter the script so that it accepts any ordinary ASCII text file as input for its initial "generation". The script will read the first $ROW*$COL characters, and set the occurrences of vowels as "living" cells. Hint: be sure to translate the spaces in the input file to underscore characters. N.2. Writing Scripts Write a script to carry out each of the following tasks. EASY Self-reproducing Script Write a script that backs itself up, that is, copies itself to a file named backup.sh. Hint: Use the cat command and the appropriate positional parameter. Home Directory Listing Perform a recursive directory listing on the user's home directory and save the information to a file. Compress the file, have the script prompt the user to insert a USB flash drive, then press ENTER. Finally, save the file to the flash drive after making certain the flash drive has properly mounted by parsing the output of df. Converting for loops to while and until loops Convert the for loops in Example 10-1 to while loops. Hint: store the data in an array and step through the array elements. Having already done the "heavy lifting," now convert the loops in the example to until loops. Changing the line spacing of a text file Write a script that reads each line of a target file, then writes the line back to stdout, but with an extra blank line following. This has the effect of double-spacing the file. Include all necessary code to check whether the script gets the necessary command-line argument (a filename), and whether the specified file exists. When the script runs correctly, modify it to triple-space the target file. Finally, write a script to remove all blank lines from the target file, single-spacing it. Backwards Listing Write a script that echoes itself to stdout, but backwards. Automatically Decompressing Files Appendix N. Exercises 794
- 801. Advanced Bash-Scripting Guide Given a list of filenames as input, this script queries each target file (parsing the output of the file command) for the type of compression used on it. Then the script automatically invokes the appropriate decompression command (gunzip, bunzip2, unzip, uncompress, or whatever). If a target file is not compressed, the script emits a warning message, but takes no other action on that particular file. Unique System ID Generate a "unique" 6-digit hexadecimal identifier for your computer. Do not use the flawed hostid command. Hint: md5sum /etc/passwd, then select the first 6 digits of output. Backup Archive as a "tarball" (*.tar.gz file) all the files in your home directory tree (/home/your-name) that have been modified in the last 24 hours. Hint: use find. Checking whether a process is still running Given a process ID (PID) as an argument, this script will check, at user-specified intervals, whether the given process is still running. You may use the ps and sleep commands. Primes Print (to stdout) all prime numbers between 60000 and 63000. The output should be nicely formatted in columns (hint: use printf). Lottery Numbers One type of lottery involves picking five different numbers, in the range of 1 - 50. Write a script that generates five pseudorandom numbers in this range, with no duplicates. The script will give the option of echoing the numbers to stdout or saving them to a file, along with the date and time the particular number set was generated. (If your script consistently generates winning lottery numbers, then you can retire on the proceeds and leave shell scripting to those of us who have to work for a living.) INTERMEDIATE Integer or String Write a script function that determines if an argument passed to it is an integer or a string. The function will return TRUE (0) if passed an integer, and FALSE (1) if passed a string. Hint: What does the following expression return when $1 is not an integer? expr $1 + 0 Managing Disk Space List, one at a time, all files larger than 100K in the /home/username directory tree. Give the user the option to delete or compress the file, then proceed to show the next one. Write to a logfile the names of all deleted files and the deletion times. Banner Simulate the functionality of the deprecated banner command in a script. Removing Inactive Accounts Inactive accounts on a network waste disk space and may become a security risk. Write an administrative script (to be invoked by root or the cron daemon) that checks for and deletes user accounts that have not been accessed within the last 90 days. Enforcing Disk Quotas Write a script for a multi-user system that checks users' disk usage. If a user surpasses a preset limit (100 MB, for example) in her /home/username directory, then the script automatically sends her a warning e-mail. The script will use the du and mail commands. As an option, it will allow setting and enforcing quotas using the quota and setquota commands. Appendix N. Exercises 795
- 802. Advanced Bash-Scripting Guide Logged in User Information For all logged in users, show their real names and the time and date of their last login. Hint: use who, lastlog, and parse /etc/passwd. Safe Delete Implement, as a script, a "safe" delete command, sdel.sh. Filenames passed as command-line arguments to this script are not deleted, but instead gzipped if not already compressed (use file to check), then moved to a ~/TRASH directory. Upon invocation, the script checks the ~/TRASH directory for files older than 48 hours and permanently deletes them. (An better alternative might be to have a second script handle this, periodically invoked by the cron daemon.) Extra credit: Write the script so it can handle files and directories recursively. This would give it the capability of "safely deleting" entire directory structures. Making Change What is the most efficient way to make change for $1.68, using only coins in common circulations (up to 25c)? It's 6 quarters, 1 dime, a nickel, and three cents. Given any arbitrary command-line input in dollars and cents ($*.??), calculate the change, using the minimum number of coins. If your home country is not the United States, you may use your local currency units instead. The script will need to parse the command-line input, then change it to multiples of the smallest monetary unit (cents or whatever). Hint: look at Example 23-8. Quadratic Equations Solve a quadratic equation of the form Ax^2 + Bx + C = 0. Have a script take as arguments the coefficients, A, B, and C, and return the solutions to four decimal places. Hint: pipe the coefficients to bc, using the well-known formula, x = ( -B +/- sqrt( B^2 - 4AC ) ) / 2A. Table of Logarithms Using the bc and printf commands, print out a nicely-formatted table of eight-place natural logarithms in the interval between 0.00 and 100.00, in steps of .01. Hint: bc requires the -l option to load the math library. Sum of Matching Numbers Find the sum of all five-digit numbers (in the range 10000 - 99999) containing exactly two out of the following set of digits: { 4, 5, 6 }. These may repeat within the same number, and if so, they count once for each occurrence. Some examples of matching numbers are 42057, 74638, and 89515. Lucky Numbers A lucky number is one whose individual digits add up to 7, in successive additions. For example, 62431 is a lucky number (6 + 2 + 4 + 3 + 1 = 16, 1 + 6 = 7). Find all the lucky numbers between 1000 and 10000. Craps Borrowing the ASCII graphics from Example A-40, write a script that plays the well-known gambling game of craps. The script will accept bets from one or more players, roll the dice, and keep track of wins and losses, as well as of each player's bankroll. Tic-tac-toe Write a script that plays the child's game of tic-tac-toe against a human player. The script will let the human choose whether to take the first move. The script will follow an optimal strategy, and therefore never lose. To simplify matters, you may use ASCII graphics: Appendix N. Exercises 796
- 803. Advanced Bash-Scripting Guide o | x | ---------- | x | ---------- | o | Your move, human (row, column)? Alphabetizing a String Alphabetize (in ASCII order) an arbitrary string read from the command-line. Parsing Parse /etc/passwd, and output its contents in nice, easy-to-read tabular form. Logging Logins Parse /var/log/messages to produce a nicely formatted file of user logins and login times. The script may need to run as root. (Hint: Search for the string "LOGIN.") Pretty-Printing a Data File Certain database and spreadsheet packages use save-files with comma-separated values (CSVs). Other applications often need to parse these files. Given a data file with comma-separated fields, of the form: Jones,Bill,235 S. Williams St.,Denver,CO,80221,(303) 244-7989 Smith,Tom,404 Polk Ave.,Los Angeles,CA,90003,(213) 879-5612 ... Reformat the data and print it out to stdout in labeled, evenly-spaced columns. Justification Given ASCII text input either from stdin or a file, adjust the word spacing to right-justify each line to a user-specified line-width, then send the output to stdout. Mailing List Using the mail command, write a script that manages a simple mailing list. The script automatically e-mails the monthly company newsletter, read from a specified text file, and sends it to all the addresses on the mailing list, which the script reads from another specified file. Generating Passwords Generate pseudorandom 8-character passwords, using characters in the ranges [0-9], [A-Z], [a-z]. Each password must contain at least two digits. Monitoring a User You suspect that one particular user on the network has been abusing his privileges and possibly attempting to hack the system. Write a script to automatically monitor and log his activities when he's signed on. The log file will save entries for the previous week, and delete those entries more than seven days old. You may use last, lastlog, and lastcomm to aid your surveillance of the suspected malefactor. Checking for Broken Links Using lynx with the -traversal option, write a script that checks a Web site for broken links. DIFFICULT Testing Passwords Write a script to check and validate passwords. The object is to flag "weak" or easily guessed password candidates. A trial password will be input to the script as a command-line parameter. To be considered acceptable, a password must meet the following minimum qualifications: Appendix N. Exercises 797
- 804. Advanced Bash-Scripting Guide ◊ Minimum length of 8 characters ◊ Must contain at least one numeric character ◊ Must contain at least one of the following non-alphabetic characters: @, #, $, %, &, *, +, -, = Optional: ◊ Do a dictionary check on every sequence of at least four consecutive alphabetic characters in the password under test. This will eliminate passwords containing embedded "words" found in a standard dictionary. ◊ Enable the script to check all the passwords on your system. These probably do not reside in /etc/passwd. This exercise tests mastery of Regular Expressions. Cross Reference Write a script that generates a cross-reference (concordance) on a target file. The output will be a listing of all word occurrences in the target file, along with the line numbers in which each word occurs. Traditionally, linked list constructs would be used in such applications. Therefore, you should investigate arrays in the course of this exercise. Example 15-12 is probably not a good place to start. Square Root Write a script to calculate square roots of numbers using Newton's Method. The algorithm for this, expressed as a snippet of Bash pseudo-code is: # (Isaac) Newton's Method for speedy extraction #+ of square roots. guess = $argument # $argument is the number to find the square root of. # $guess is each successive calculated "guess" -- or trial solution -- #+ of the square root. # Our first "guess" at a square root is the argument itself. oldguess = 0 # $oldguess is the previous $guess. tolerance = .000001 # To how close a tolerance we wish to calculate. loopcnt = 0 # Let's keep track of how many times through the loop. # Some arguments will require more loop iterations than others. while [ ABS( $guess $oldguess ) -gt $tolerance ] # ^^^^^^^^^^^^^^^^^^^^^^^ Fix up syntax, of course. # "ABS" is a (floating point) function to find the absolute value #+ of the difference between the two terms. # So, as long as difference between current and previous #+ trial solution (guess) exceeds the tolerance, keep looping. do oldguess = $guess # Update $oldguess to previous $guess. # ======================================================= guess = ( $oldguess + ( $argument / $oldguess ) ) / 2.0 # = 1/2 ( ($oldguess **2 + $argument) / $oldguess ) # equivalent to: # = 1/2 ( $oldguess + $argument / $oldguess ) Appendix N. Exercises 798
- 805. Advanced Bash-Scripting Guide # that is, "averaging out" the trial solution and #+ the proportion of argument deviation #+ (in effect, splitting the error in half). # This converges on an accurate solution #+ with surprisingly few loop iterations . . . #+ for arguments > $tolerance, of course. # ======================================================= (( loopcnt++ )) # Update loop counter. done It's a simple enough recipe, and seems at first glance easy enough to convert into a working Bash script. The problem, though, is that Bash has no native support for floating point numbers. So, the script writer needs to use bc or possibly awk to convert the numbers and do the calculations. It may get rather messy . . . Logging File Accesses Log all accesses to the files in /etc during the course of a single day. This information should include the filename, user name, and access time. If any alterations to the files take place, that should be flagged. Write this data as neatly formatted records in a logfile. Monitoring Processes Write a script to continually monitor all running processes and to keep track of how many child processes each parent spawns. If a process spawns more than five children, then the script sends an e-mail to the system administrator (or root) with all relevant information, including the time, PID of the parent, PIDs of the children, etc. The script appends a report to a log file every ten minutes. Strip Comments Strip all comments from a shell script whose name is specified on the command-line. Note that the #! line must not be stripped out. Strip HTML Tags Strip all HTML tags from a specified HTML file, then reformat it into lines between 60 and 75 characters in length. Reset paragraph and block spacing, as appropriate, and convert HTML tables to their approximate text equivalent. XML Conversion Convert an XML file to both HTML and text format. Chasing Spammers Write a script that analyzes a spam e-mail by doing DNS lookups on the IP addresses in the headers to identify the relay hosts as well as the originating ISP. The script will forward the unaltered spam message to the responsible ISPs. Of course, it will be necessary to filter out your own ISP's IP address, so you don't end up complaining about yourself. As necessary, use the appropriate network analysis commands. For some ideas, see Example 15-41 and Example A-28. Optional: Write a script that searches through a list of e-mail messages and deletes the spam according to specified filters. Creating man pages Write a script that automates the process of creating man pages. Given a text file which contains information to be formatted into a man page, the script will read the file, then invoke the appropriate groff commands to output the corresponding man page to stdout. The text file contains blocks of information under the standard man page headings, i.e., NAME, SYNOPSIS, DESCRIPTION, etc. Appendix N. Exercises 799
- 806. Advanced Bash-Scripting Guide Example A-39 is an instructive first step. Morse Code Convert a text file to Morse code. Each character of the text file will be represented as a corresponding Morse code group of dots and dashes (underscores), separated by whitespace from the next. For example: Invoke the "morse.sh" script with "script" as an argument to convert to Morse. $ sh morse.sh script ... _._. ._. .. .__. _ s c r i p t Hex Dump Do a hex(adecimal) dump on a binary file specified as an argument. The output should be in neat tabular fields, with the first field showing the address, each of the next 8 fields a 4-byte hex number, and the final field the ASCII equivalent of the previous 8 fields. The obvious followup to this is to extend the hex dump script into a disassembler. Using a lookup table, or some other clever gimmick, convert the hex values into 80x86 op codes. Emulating a Shift Register Using Example 26-15 as an inspiration, write a script that emulates a 64-bit shift register as an array. Implement functions to load the register, shift left, shift right, and rotate it. Finally, write a function that interprets the register contents as eight 8-bit ASCII characters. Calculating Determinants Write a script that calculates determinants [142] by recursively expanding the minors. Use a 4 x 4 determinant as a test case. Hidden Words Write a "word-find" puzzle generator, a script that hides 10 input words in a 10 x 10 array of random letters. The words may be hidden across, down, or diagonally. Optional: Write a script that solves word-find puzzles. To keep this from becoming too difficult, the solution script will find only horizontal and vertical words. (Hint: Treat each row and column as a string, and search for substrings.) Anagramming Anagram 4-letter input. For example, the anagrams of word are: do or rod row word. You may use /usr/share/dict/linux.words as the reference list. Word Ladders A "word ladder" is a sequence of words, with each successive word in the sequence differing from the previous one by a single letter. For example, to "ladder" from mark to vase: mark --> park --> part --> past --> vast --> vase ^ ^ ^ ^ ^ Write a script that solves word ladder puzzles. Given a starting and an ending word, the script will list all intermediate steps in the "ladder." Note that all words in the sequence must be legitimate dictionary words. Fog Index The "fog index" of a passage of text estimates its reading difficulty, as a number corresponding roughly to a school grade level. For example, a passage with a fog index of 12 should be Appendix N. Exercises 800
- 807. Advanced Bash-Scripting Guide comprehensible to anyone with 12 years of schooling. The Gunning version of the fog index uses the following algorithm. 1. Choose a section of the text at least 100 words in length. 2. Count the number of sentences (a portion of a sentence truncated by the boundary of the text section counts as one). 3. Find the average number of words per sentence. AVE_WDS_SEN = TOTAL_WORDS / SENTENCES 4. Count the number of "difficult" words in the segment -- those containing at least 3 syllables. Divide this quantity by total words to get the proportion of difficult words. PRO_DIFF_WORDS = LONG_WORDS / TOTAL_WORDS 5. The Gunning fog index is the sum of the above two quantities, multiplied by 0.4, then rounded to the nearest integer. G_FOG_INDEX = int ( 0.4 * ( AVE_WDS_SEN + PRO_DIFF_WORDS ) ) Step 4 is by far the most difficult portion of the exercise. There exist various algorithms for estimating the syllable count of a word. A rule-of-thumb formula might consider the number of letters in a word and the vowel-consonant mix. A strict interpretation of the Gunning fog index does not count compound words and proper nouns as "difficult" words, but this would enormously complicate the script. Calculating PI using Buffon's Needle The Eighteenth Century French mathematician de Buffon came up with a novel experiment. Repeatedly drop a needle of length n onto a wooden floor composed of long and narrow parallel boards. The cracks separating the equal-width floorboards are a fixed distance d apart. Keep track of the total drops and the number of times the needle intersects a crack on the floor. The ratio of these two quantities turns out to be a fractional multiple of PI. In the spirit of Example 15-50, write a script that runs a Monte Carlo simulation of Buffon's Needle. To simplify matters, set the needle length equal to the distance between the cracks, n = d. Hint: there are actually two critical variables: the distance from the center of the needle to the nearest crack, and the inclination angle of the needle to that crack. You may use bc to handle the calculations. Playfair Cipher Implement the Playfair (Wheatstone) Cipher in a script. The Playfair Cipher encrypts text by substitution of digrams (2-letter groupings). It is traditional to use a 5 x 5 letter scrambled-alphabet key square for the encryption and decryption. C O D E S A B F G H I K L M N P Q R T U V W X Y Z Each letter of the alphabet appears once, except "I" also represents "J". The arbitrarily chosen key word, "CODES" comes first, then all the rest of the alphabet, in order from left to right, skipping letters already used. Appendix N. Exercises 801
- 808. Advanced Bash-Scripting Guide To encrypt, separate the plaintext message into digrams (2-letter groups). If a group has two identical letters, delete the second, and form a new group. If there is a single letter left over at the end, insert a "null" character, typically an "X." THIS IS A TOP SECRET MESSAGE TH IS IS AT OP SE CR ET ME SA GE For each digram, there are three possibilities. ----------------------------------------------- 1) Both letters will be on the same row of the key square: For each letter, substitute the one immediately to the right, in that row. If necessary, wrap around left to the beginning of the row. or 2) Both letters will be in the same column of the key square: For each letter, substitute the one immediately below it, in that row. If necessary, wrap around to the top of the column. or 3) Both letters will form the corners of a rectangle within the key square: For each letter, substitute the one on the other corner the rectangle which lies on the same row. The "TH" digram falls under case #3. G H M N T U (Rectangle with "T" and "H" at corners) T --> U H --> G The "SE" digram falls under case #1. C O D E S (Row containing "S" and "E") S --> C (wraps around left to beginning of row) E --> S ========================================================================= To decrypt encrypted text, reverse the above procedure under cases #1 and #2 (move in opposite direction for substitution). Under case #3, just take the remaining two corners of the rectangle. Helen Fouche Gaines' classic work, ELEMENTARY CRYPTANALYSIS (1939), gives a fairly detailed description of the Playfair Cipher and its solution methods. This script will have three main sections I. Generating the key square, based on a user-input keyword. II. Encrypting a plaintext message. III. Decrypting encrypted text. Appendix N. Exercises 802
- 809. Advanced Bash-Scripting Guide The script will make extensive use of arrays and functions. -- Please do not send the author your solutions to these exercises. There are more appropriate ways to impress him with your cleverness, such as submitting bugfixes and suggestions for improving this book. Appendix N. Exercises 803
- 810. Appendix O. Revision History This document first appeared as a 60-page HOWTO in the late spring of 2000. Since then, it has gone through quite a number of updates and revisions. This book could not have been written without the assistance of the Linux community, and especially of the volunteers of the Linux Documentation Project. Here is the e-mail to the LDP requesting permission to submit version 0.1. From thegrendel@theriver.com Sat Jun 10 09:05:33 2000 -0700 Date: Sat, 10 Jun 2000 09:05:28 -0700 (MST) From: "M. Leo Cooper" <thegrendel@theriver.com> X-Sender: thegrendel@localhost To: ldp-discuss@lists.linuxdoc.org Subject: Permission to submit HOWTO Dear HOWTO Coordinator, I am working on and would like to submit to the LDP a HOWTO on the subject of "Bash Scripting" (shell scripting, using 'bash'). As it happens, I have been writing this document, off and on, for about the last eight months or so, and I could produce a first draft in ASCII text format in a matter of just a few more days. I began writing this out of frustration at being unable to find a decent book on shell scripting. I managed to locate some pretty good articles on various aspects of scripting, but nothing like a complete, beginning-to-end tutorial. Well, in keeping with my philosophy, if all else fails, do it yourself. As it stands, this proposed "Bash-Scripting HOWTO" would serve as a combination tutorial and reference, with the heavier emphasis on the tutorial. It assumes Linux experience, but only a very basic level of programming skills. Interspersed with the text are 79 illustrative example scripts of varying complexity, all liberally commented. There are even exercises for the reader. At this stage, I'm up to 18,000+ words (124k), and that's over 50 pages of text (whew!). I haven't mentioned that I've previously authored an LDP HOWTO, the "Software-Building HOWTO", which I wrote in Linuxdoc/SGML. I don't know if I could handle Docbook/SGML, and I'm glad you have volunteers to do the conversion. You people seem to have gotten on a more organized basis these last few months. Working with Greg Hankins and Tim Bynum was nice, but a professional team is even nicer. Anyhow, please advise. Mendel Cooper thegrendel@theriver.com Table O-1. Revision History Release Date Comments Appendix O. Revision History 804
- 811. Advanced Bash-Scripting Guide 0.1 14 Jun 2000 Initial release. 0.2 30 Oct 2000 Bugs fixed, plus much additional material and more example scripts. 0.3 12 Feb 2001 Major update. 0.4 08 Jul 2001 Complete revision and expansion of the book. 0.5 03 Sep 2001 Major update: Bugfixes, material added, sections reorganized. 1.0 14 Oct 2001 Stable release: Bugfixes, reorganization, material added. 1.1 06 Jan 2002 Bugfixes, material and scripts added. 1.2 31 Mar 2002 Bugfixes, material and scripts added. 1.3 02 Jun 2002 TANGERINE release: A few bugfixes, much more material and scripts added. 1.4 16 Jun 2002 MANGO release: A number of typos fixed, more material and scripts. 1.5 13 Jul 2002 PAPAYA release: A few bugfixes, much more material and scripts added. 1.6 29 Sep 2002 POMEGRANATE release: Bugfixes, more material, one more script. 1.7 05 Jan 2003 COCONUT release: A couple of bugfixes, more material, one more script. 1.8 10 May 2003 BREADFRUIT release: A number of bugfixes, more scripts and material. 1.9 21 Jun 2003 PERSIMMON release: Bugfixes, and more material. 2.0 24 Aug 2003 GOOSEBERRY release: Major update. 2.1 14 Sep 2003 HUCKLEBERRY release: Bugfixes, and more material. 2.2 31 Oct 2003 CRANBERRY release: Major update. 2.3 03 Jan 2004 STRAWBERRY release: Bugfixes and more material. 2.4 25 Jan 2004 MUSKMELON release: Bugfixes. 2.5 15 Feb 2004 STARFRUIT release: Bugfixes and more material. 2.6 15 Mar 2004 SALAL release: Minor update. 2.7 18 Apr 2004 MULBERRY release: Minor update. 2.8 11 Jul 2004 ELDERBERRY release: Minor update. 3.0 03 Oct 2004 LOGANBERRY release: Major update. 3.1 14 Nov 2004 BAYBERRY release: Bugfix update. 3.2 06 Feb 2005 BLUEBERRY release: Minor update. 3.3 20 Mar 2005 RASPBERRY release: Bugfixes, much material added. 3.4 08 May 2005 TEABERRY release: Bugfixes, stylistic revisions. 3.5 05 Jun 2005 BOXBERRY release: Bugfixes, some material added. 3.6 28 Aug 2005 POKEBERRY release: Bugfixes, some material added. 3.7 23 Oct 2005 WHORTLEBERRY release: Bugfixes, some material added. 3.8 26 Feb 2006 BLAEBERRY release: Bugfixes, some material added. 3.9 15 May 2006 SPICEBERRY release: Bugfixes, some material added. 4.0 18 Jun 2006 WINTERBERRY release: Major reorganization. 4.1 08 Oct 2006 WAXBERRY release: Minor update. 4.2 10 Dec 2006 SPARKLEBERRY release: Important update. 4.3 29 Apr 2007 INKBERRY release: Bugfixes, material added. 5.0 24 Jun 2007 SERVICEBERRY release: Major update. 5.1 10 Nov 2007 LINGONBERRY release: Minor update. 5.2 16 Mar 2008 SILVERBERRY release: Important update. 5.3 11 May 2008 GOLDENBERRY release: Minor update. Appendix O. Revision History 805
- 812. Advanced Bash-Scripting Guide 5.4 21 Jul 2008 ANGLEBERRY release: Major update. 5.5 23 Nov 2008 FARKLEBERRY release: Minor update. 5.6 26 Jan 2009 WORCESTERBERRY release: Minor update. 6.0 23 Mar 2009 THIMBLEBERRY release: Major update. 6.1 30 Sep 2009 BUFFALOBERRY release: Minor update. Appendix O. Revision History 806
- 813. Appendix P. Download and Mirror Sites The latest update of this document, as an archived, bzip2-ed "tarball" including both the SGML source and rendered HTML, may be downloaded from the author's home site). A pdf version is also available. The change log gives a detailed revision history. The ABS Guide even has its own freshmeat.net page to keep track of major updates, user comments, and popularity ratings for the project. The main hosting site for this document is the Linux Documentation Project, which maintains many other Guides and HOWTOs as well. Many thanks to Ronny Bangsund for donating server space to host this project. Appendix P. Download and Mirror Sites 807
- 814. Appendix Q. To Do List • A comprehensive survey of incompatibilities between Bash and the classic Bourne shell. • Same as above, but for the Korn shell (ksh). • A primer on CGI programming, using Bash. Here is a simple CGI script to get you started. Example Q-1. Print the server environment #!/bin/bash # May have to change the location for your site. # (At the ISP's servers, Bash may not be in the usual place.) # Other places: /usr/bin or /usr/local/bin # Might even try it without any path in sha-bang. # test-cgi.sh # by Michael Zick # Used with permission # Disable filename globbing. set -f # Header tells browser what to expect. echo Content-type: text/plain echo echo CGI/1.0 test script report: echo echo environment settings: set echo echo whereis bash? whereis bash echo echo who are we? echo ${BASH_VERSINFO[*]} echo echo argc is $#. argv is "$*". echo # CGI/1.0 expected environment variables. echo SERVER_SOFTWARE = $SERVER_SOFTWARE echo SERVER_NAME = $SERVER_NAME echo GATEWAY_INTERFACE = $GATEWAY_INTERFACE echo SERVER_PROTOCOL = $SERVER_PROTOCOL echo SERVER_PORT = $SERVER_PORT echo REQUEST_METHOD = $REQUEST_METHOD echo HTTP_ACCEPT = "$HTTP_ACCEPT" echo PATH_INFO = "$PATH_INFO" echo PATH_TRANSLATED = "$PATH_TRANSLATED" Appendix Q. To Do List 808
- 815. Advanced Bash-Scripting Guide echo SCRIPT_NAME = "$SCRIPT_NAME" echo QUERY_STRING = "$QUERY_STRING" echo REMOTE_HOST = $REMOTE_HOST echo REMOTE_ADDR = $REMOTE_ADDR echo REMOTE_USER = $REMOTE_USER echo AUTH_TYPE = $AUTH_TYPE echo CONTENT_TYPE = $CONTENT_TYPE echo CONTENT_LENGTH = $CONTENT_LENGTH exit 0 # Here document to give short instructions. :<<-'_test_CGI_' 1) Drop this in your http://domain.name/cgi-bin directory. 2) Then, open http://domain.name/cgi-bin/test-cgi.sh. _test_CGI_ Appendix Q. To Do List 809
- 816. Appendix R. Copyright The Advanced Bash Scripting Guide is copyright © 2000, by Mendel Cooper. [143] The author also asserts copyright on all previous versions of this document. [144] This blanket copyright recognizes and protects the rights of all contributors to this document. This document may only be distributed subject to the terms and conditions set forth in the Open Publication License (version 1.0 or later), http://www.opencontent.org/openpub/. The following license options also apply. A. Distribution of substantively modified versions of this document is permitted only under the following provisions. A1. The modified document must clearly indicate that it is derivative of the original Advanced Bash Scripting Guide, and the original author, Mendel Cooper, must be listed as the primary author. A2. The modified or derivative document must clearly indicate which portions of the text differ or deviate from the original document. A notice must be present, stating that the original author does not necessarily endorse the changes to the original. A3. The modified or derivative document must be distributed under this same license, and the original author's copyright, as applicable, may not be modified. B. This document, or any modified or derivative version thereof, may NOT be distributed encrypted or with any form of DRM (Digital Rights Management) or content-control mechanism embedded in it. Nor may this document or any derivative thereof be bundled with other DRM-ed works. C. If this document (or any previous version or derivative thereof) is made available on a Web or ftp site, then the file(s) must be publicly accessible. No password or other access restrictions to its download may be imposed. D. Distribution of the original work in any standard (paper) book form requires permission from the copyright holder. E. In the event that the author or maintainer of this document cannot be contacted, the Linux Documentation Project is authorized to take over custodianship of the document and name a new maintainer, who would then have the right to update and modify the document. Without explicit written permission from the author, distributors and publishers (including on-line publishers) are prohibited from imposing any additional conditions, strictures, or provisions on this document, any previous versions, or any derivative versions. As of this update, the author asserts that he has not entered into any contractual obligations that would alter the foregoing declarations. Essentially, you may freely distribute this book or any derivative thereof in electronic form. If you display or distribute this document, any previous versions thereof, or any derivatives thereof under any license except the one above, then you are required to obtain the author's written permission. Failure to do so may terminate your distribution rights. Appendix R. Copyright 810
- 817. Advanced Bash-Scripting Guide Additionally, the following waiver applies: By copying or distributing this book you WAIVE THE RIGHT to use the materials within, or any portion thereof, in a patent or copyright lawsuit against the Open Source community, its developers, its distributors, or against any of its associated software or documentation including, but not limited to, the Linux kernel, Open Office, Samba, and Wine. You further WAIVE THE RIGHT to use any of the materials within this book in testimony or depositions as a plaintiff's "expert witness" in any lawsuit against the Open Source community, any of its developers, its distributors, or any of its associated software or documentation. These are very liberal terms, and they should not hinder any legitimate distribution or use of this book. The author especially encourages its use for classroom and instructional purposes. Certain of the scripts contained in this document are, where noted, in the Public Domain. These scripts are exempt from the foregoing license and copyright restrictions. The commercial print and other rights to this book are available. Please contact the author if interested. The author produced this book in a manner consistent with the spirit of the LDP Manifesto. Linux is a trademark registered to Linus Torvalds. Fedora is a trademark registered to Red Hat. Unix and UNIX are trademarks registered to the Open Group. MS Windows is a trademark registered to the Microsoft Corp. Solaris is a trademark registered to Sun, Inc. OSX is a trademark registered to Apple, Inc. Yahoo is a trademark registered to Yahoo, Inc. Pentium is a trademark registered to Intel, Inc. Thinkpad is a trademark registered to Lenovo, Inc. Scrabble is a trademark registered to Hasbro, Inc. Librie, PRS-500, and PRS-505 are trademarks registered to Sony, Inc. All other commercial trademarks mentioned in the body of this work are registered to their respective owners. Hyun Jin Cha has done a Korean translation of version 1.0.11 of this book. Spanish, Portuguese, French, German, Italian, Russian, Czech, Chinese, Indonesian, and Dutch translations are also available or in progress. If you wish to translate this document into another language, please feel free to do so, subject to the terms stated above. The author wishes to be notified of such efforts. Appendix R. Copyright 811
- 818. Appendix S. ASCII Table In a book of this sort it is traditional to have an ASCII Table appendix. This book does not. Instead, here is a short shell script that generates a complete ASCII table and writes it to the file ASCII.txt. Example S-1. A script that generates an ASCII table #!/bin/bash # ascii.sh # ver. 0.2, reldate 26 Aug 2008 # Patched by ABS Guide author. # Original script by Sebastian Arming. # Used with permission (thanks!). exec >ASCII.txt # Save stdout to file, #+ as in the example scripts #+ reassign-stdout.sh and upperconv.sh. MAXNUM=256 COLUMNS=5 OCT=8 OCTSQU=64 LITTLESPACE=-3 BIGSPACE=-5 i=1 # Decimal counter o=1 # Octal counter while [ "$i" -lt "$MAXNUM" ]; do # We don't have to count past 400 octal. paddi=" $i" echo -n "${paddi: $BIGSPACE} " # Column spacing. paddo="00$o" # echo -ne "${paddo: $LITTLESPACE}" # Original. echo -ne "0${paddo: $LITTLESPACE}" # Fixup. # ^ echo -n " " if (( i % $COLUMNS == 0)); then # New line. echo fi ((i++, o++)) # The octal notation for 8 is 10, and 64 decimal is 100 octal. (( i % $OCT == 0)) && ((o+=2)) (( i % $OCTSQU == 0)) && ((o+=20)) done exit $? # Compare this script with the "pr-asc.sh" example. # This one handles "unprintable" characters. # Exercise: # Rewrite this script to use decimal numbers, rather than octal. Appendix S. ASCII Table 812
- 819. Advanced Bash-Scripting Guide Index This index / glossary / quick-reference lists many of the important topics covered in the text. Terms are arranged in approximate ASCII sorting order, modified as necessary for enhanced clarity. Note that commands are indexed in Part 4. *** ^ (caret) • Beginning-of-line, in a Regular Expression •^ ^^ Uppercase conversion in parameter substitution ~ Tilde • ~ home directory, corresponds to $HOME • ~/ Current user's home directory • ~+ Current working directory • ~- Previous working directory = Equals sign • = Variable assignment operator • = String comparison operator == String comparison operator • =~ Regular Expression match operator Example script < Left angle bracket • Is-less-than String comparison Integer comparison within double parentheses • Redirection < stdin << Here document <<< Here string Appendix S. ASCII Table 813
- 820. Advanced Bash-Scripting Guide <> Opening a file for both reading and writing > Right angle bracket • Is-greater-than String comparison Integer comparison, within double parentheses • Redirection > Redirect stdout to a file >> Redirect stdout to a file, but append i>&j Redirect file descriptor i to file descriptor j >&j Redirect stdout to file descriptor j >&2 Redirect stdout of a command to stderr 2>&1 Redirect stderr to stdout &> Redirect both stdout and stderr of a command to a file :> file Truncate file to zero length | Pipe, a device for passing the output of a command to another command or to the shell || Logical OR test operator - (dash) • Prefix to default parameter, in parameter substitution • Prefix to option flag • Indicating redirection from stdin or stdout • -- (double-dash) Prefix to long command options C-style variable decrement within double parentheses ; (semicolon) • As command separator • ; Escaped semicolon, terminates a find command • ;; Double-semicolon, terminator in a case option Required when ... do keyword is on the first line of loop Appendix S. ASCII Table 814
- 821. Advanced Bash-Scripting Guide terminating curly-bracketed code block • ;;& ;& Terminators in a case option (version 4+ of Bash). : Colon, null command, equivalent to the true Bash builtin • :> file Truncate file to zero length ! Negation operator, inverts exit status of a test or command • != not-equal-to String comparison operator ? (question mark) • Match zero or one characters, in an Extended Regular Expression • Single-character wild card, in globbing • In a C-style Trinary operator // Double forward slash, behavior of cd command toward . (dot / period) • . Load a file (into a script), equivalent to source command • . Match single character, in a Regular Expression • . Current working directory ./ Current working directory • .. Parent directory ' ... ' (single quotes) strong quoting " ... " (double quotes) weak quoting • Double-quoting the backslash () character , • Comma operator •, ,, Lowercase conversion in parameter substitution () Parentheses • ( ... ) Command group; starts a subshell • ( ... ) Enclose group of Extended Regular Expressions • >( ... ) <( ... ) Process substitution • ... ) Terminates test-condition in case construct Appendix S. ASCII Table 815
- 822. Advanced Bash-Scripting Guide • (( ... )) Double parentheses, in arithmetic expansion [ Left bracket, test construct [ ]Brackets • Array element • Enclose character set to match in a Regular Expression • Test construct [[ ... ]] Double brackets, extended test construct $ Anchor, in a Regular Expression $ Prefix to a variable name $( ... ) Command substitution, setting a variable with output of a command, using parentheses notation ` ... ` Command substitution, using backquotes notation $[ ... ] Integer expansion (deprecated) ${ ... } Variable manipulation / evaluation • ${var} Value of a variable • ${#var} Length of a variable • ${#@} ${#*} Number of positional parameters • ${parameter?err_msg} Parameter-unset message • ${parameter-default} ${parameter:-default} ${parameter=default} ${parameter:=default} Set default parameter • ${parameter+alt_value} ${parameter:+alt_value} Alternate value of parameter, if set • ${!var} Indirect referencing of a variable, new notation • ${!#} Final positional parameter. (This is an indirect reference to $#.) • ${!varprefix*} ${!varprefix@} Appendix S. ASCII Table 816
- 823. Advanced Bash-Scripting Guide Match names of all previously declared variables beginning with varprefix • ${string:position} ${string:position:length} Substring extraction • ${var#Pattern} ${var##Pattern} Substring removal • ${var%Pattern} ${var%%Pattern} Substring removal • ${string/substring/replacement} ${string//substring/replacement} ${string/#substring/replacement} ${string/%substring/replacement} Substring replacement Escape the character following • < ... > Angle brackets, escaped, word boundary in a Regular Expression • { N } "Curly" brackets, escaped, number of character sets to match in an Extended RE • ; Semicolon, escaped, terminates a find command • $$ Indirect reverencing of a variable, old-style notation • Escaping a newline, to write a multi-line command & • &> Redirect both stdout and stderr of a command to a file • >&j Redirect stdout to file descriptor j >&2 Redirect stdout of a command to stderr • i>&j Redirect file descriptor i to file descriptor j 2>&1 Redirect stderr to stdout • Closing file descriptors n<&- Close input file descriptor n 0<&-, <&- Close stdin n>&- Close output file descriptor n 1>&-, >&- Close stdout • && Logical AND test operator • Command & Run job in background # Hashmark, special symbol beginning a script comment #! Sha-bang, special string starting a shell script Appendix S. ASCII Table 817
- 824. Advanced Bash-Scripting Guide * Asterisk • Wild card, in globbing • Any number of characters in a Regular Expression • ** Exponentiation, arithmetic operator • ** Extended globbing file-match operator % Percent sign • Modulo, division-remainder arithmetic operation • Substring removal (pattern matching) operator + Plus sign • Character match, in an extended Regular Expression • Prefix to alternate parameter, in parameter substitution • ++ C-style variable increment, within double parentheses *** Shell Variables $_ Last argument to previous command $- Flags passed to script, using set $! Process ID of last background job $? Exit status of a command $@ All the positional parameters, as separate words $* All the positional parameters, as a single word $$ Process ID of the script $# Number of arguments passed to a function, or to the script itself $0 Filename of the script $1 First argument passed to script $9 Ninth argument passed to script Table of shell variables ****** -a Logical AND compound comparison test Address database, script example Appendix S. ASCII Table 818
- 825. Advanced Bash-Scripting Guide Advanced Bash Scripting Guide, where to download Alias • Removing an alias, using unalias Anagramming And list • To supply default command-line argument And logical operator && Angle brackets, escaped, < . . . > word boundary in a Regular Expression Anonymous here document, using : Archiving • rpm • tar Arithmetic expansion • variations of Arithmetic operators • combination operators, C-style += -= *= /= %= In certain contexts, += can also function as a string concatenation operator. Arrays • Associative arrays • Bracket notation • Concatenating, example script • Copying • Declaring declare -a array_name • Embedded arrays • Empty arrays, empty elements, example script • Indirect references • Initialization array=( element1 element2 ... elementN) Appendix S. ASCII Table 819
- 826. Advanced Bash-Scripting Guide Example script Using command substitution • Loading a file into an array • Multidimensional, simulating • Nesting and embedding • Notation and usage • Number of elements in ${#array_name[@]} ${#array_name[*]} • Operations • Passing an array to a function • As return value from a function • Special properties, example script • String operations, example script • unset deletes array elements Arrow keys, detecting ASCII table awk field-oriented text processing language • rand(), random function • String manipulation • Using export to pass a variable to an embedded awk script *** Backquotes, used in command substitution Base conversion, example script Bash • Bad scripting practices • Basics reviewed, script example • Command-line options Table • Features that classic Bourne shell lacks • Internal variables • Version 2 • Version 3 • Version 4 .bashrc $BASH_SUBSHELL Appendix S. ASCII Table 820
- 827. Advanced Bash-Scripting Guide Basic commands, external Batch files, DOS Batch processing bc, calculator utility • In a here document • Template for calculating a script variable Bibliography Bison utility Bitwise operators Block devices • testing for Blocks of code • Redirection Script example: redirecting output of a a code block Brace expansion • Extended, {a..z} • With increment and zero-padding (new feature in Bash, version 4) Brackets, [ ] • Array element • Enclose character set to match in a Regular Expression • Test construct Brackets, curly, {}, used in • Code block • find • Extended Regular Expressions • Positional parameters • xargs break loop control command • Parameter (optional) Builtins in Bash Appendix S. ASCII Table 821
- 828. Advanced Bash-Scripting Guide • Do not fork a subprocess *** case construct • Command-line parameters, handling • Globbing, filtering strings with cat, concatentate file(s) • Abuse of • cat scripts • Less efficient than redirecting stdin • Piping the output of, to a read • Uses of Character devices • testing for Checksum Child processes Colon, : , equivalent to the true Bash builtin Colorizing scripts • Cycling through the background colors, example script • Table of color escape sequences • Template, colored text on colored background Comma operator, linking commands or operations Command-line options command_not_found_handle () builtin error-handling function (version 4+ of Bash) Command substitution • $( ... ), preferred notation • Backquotes • Extending the Bash toolset • Invokes a subshell • Nesting • Removes trailing newlines • Setting variable from loop output • Word splitting Comment headers, special purpose Appendix S. ASCII Table 822
- 829. Advanced Bash-Scripting Guide Commenting out blocks of code • Using an anonymous here document • Using an if-then construct Communications and hosts Compound comparison operators Compression utilities • bzip2 • compress • gzip • zip continue loop control command Control characters • Control-C, break • Control-D, terminate / log out / erase • Control-G, BEL (beep) • Control-H, rubout • Control-J, newline • Control-M, carriage return Coprocesses cron, scheduling daemon C-style syntax , for handling variables Crossword puzzle solver Curly brackets {} • in find command • in an Extended Regular Expression • in xargs *** Daemons, in UNIX-type OS date dc, calculator utility dd, data duplicator command Appendix S. ASCII Table 823
- 830. Advanced Bash-Scripting Guide • Conversions • Copying raw data to/from devices • File deletion, secure • Keystrokes, capturing • Options • Random access on a data stream • Swapfiles, initializing • Thread on www.linuxquestions.org Debugging scripts • Tools • Trapping at exit • Trapping signals Decimal number, Bash interprets numbers as declare builtin • options case-modification options (version 4+ of Bash) Default parameters /dev directory • /dev/null pseudo-device file • /dev/urandom pseudo-device file, generating pseudorandom numbers with • /dev/zero, pseudo-device file Device file dialog, utility for generating dialog boxes in a script $DIRSTACK directory stack Disabled commands, in restricted shells do keyword, begins execution of commands within a loop done keyword, terminates a loop DOS batch files, converting to shell scripts DOS commands, UNIX equivalents of (table) dot files, "hidden" setup and configuration files Double brackets [[ ... ]] test construct Appendix S. ASCII Table 824
- 831. Advanced Bash-Scripting Guide • and evaluation of octal/hex constants Double parentheses (( ... )) arithmetic expansion/evaluation construct Double quotes " ... " weak quoting • Double-quoting the backslash () character Double-spacing a text file, using sed *** -e File exists test echo • Feeding commands down a pipe • Setting a variable using command substitution • /bin/echo, external echo command elif, Contraction of else and if else Encrypting files, using openssl esac, keyword terminating case construct Environmental variables -eq , is-equal-to integer comparison test Eratosthenes, Sieve of, algorithm for generating prime numbers Escaped characters, special meanings of /etc/fstab (filesystem mount) file /etc/passwd (user account) file $EUID, Effective user ID eval, Combine and evaluate expression(s), with variable expansion • Effects of, Example script • Forces reevaluation of arguments • And indirect references • Risk of using • Using eval to select among variables Evaluation of octal/hex constants within [[ ... ]] Appendix S. ASCII Table 825
- 832. Advanced Bash-Scripting Guide exec command, using in redirection Exercises Exit and Exit status • exit command • Exit status (exit code, return status of a command) Table, Exit codes with special meanings Out of range Pipe exit status Specified by a function return Successful, 0 /usr/include/sysexits.h, system file listing C/C++ standard exit codes Export, to make available variables to child processes • Passing a variable to an embedded awk script expr, Expression evaluator • Substring extraction • Substring index (numerical position in string) • Substring matching Extended Regular Expressions • ? (question mark) Match zero / one characters • ( ... ) Group of expressions • { N } "Curly" brackets, escaped, number of character sets to match • + Character match *** factor, decomposes an integer into its prime factors • Application: Generating prime numbers false, returns unsuccessful (1) exit status Field, a group of characters that comprises an item of data Files / Archiving File descriptors Appendix S. ASCII Table 826
- 833. Advanced Bash-Scripting Guide • Closing n<&- Close input file descriptor n 0<&-, <&- Close stdin n>&- Close output file descriptor n 1>&-, >&- Close stdout • File handles in C, similarity to File encryption find • {} Curly brackets • ; Escaped semicolon Filter • Using - with file-processing utility as a filter • Feeding output of a filter back to same filter Floating point numbers, Bash does not recognize fold, a filter to wrap lines of text Forking a child process for loops Functions • Arguments passed referred to by position • Capturing the return value of a function using echo • Definition must precede first call to function • Exit status • Local variables and recursion • Passing an array to a function • Passing pointers to a function • Positional parameters • Recursion • Redirecting stdin of a function • return Multiple return values from a function, example script Returning an array from a function Appendix S. ASCII Table 827
- 834. Advanced Bash-Scripting Guide return range limits, workarounds • shift arguments passed to a function *** Games and amusements • Anagrams • Anagrams, again • Crossword puzzle solver • Crypto-Quotes • Dealing a deck of cards • Fifteen Puzzle • Horse race • Knight's Tour • "Life" game • Magic Squares • Music-playing script • Nim • Pachinko • Perquackey • Petals Around the Rose • Podcasting • Poem • Towers of Hanoi Graphic version Alternate graphic version getopt, external command for parsing script command-line arguments • Emulated in a script getopts, Bash builtin for parsing script command-line arguments • $OPTIND / $OPTARG Global variable Globbing, filename expansion • Wild cards • Will not match dot files Golden Ratio (Phi) -ge , greater-than or equal integer comparison test -gt , greater-than integer comparison test Appendix S. ASCII Table 828
- 835. Advanced Bash-Scripting Guide groff, text markup and formatting language $GROUPS, Groups user belongs to gzip, compression utility *** Hashing, creating lookup keys in a table • Example script head, echo to stdout lines at the beginning of a text file help, gives usage summary of a Bash builtin Here documents • Anonymous here documents, using : Commenting out blocks of code Self-documenting scripts • bc in a here document • cat scripts • Command substitution • ex scripts • Function, supplying input to • Here strings Calculating the Golden Ratio Prepending text Using read • Limit string ! as a limit string Closing limit string may not be indented Dash option to limit string, <<-LimitString • Literal text output, for generating program code • Parameter substitution Disabling parameter substitution • Passing parameters • Temporary files • Using vi non-interactively History commands Appendix S. ASCII Table 829
- 836. Advanced Bash-Scripting Guide $HOME, user's home directory Homework assignment solver $HOSTNAME, system host name *** $Id parameter, in rcs (Revision Control System) if [ condition ]; then ... test construct • if-grep, if and grep in combination Fixup for if-grep test $IFS, Internal field separator variable • Defaults to whitespace Integer comparison operators in, keyword preceding [list] in a for loop Initialization table, /etc/inittab Inline group, i.e., code block Interactive script, test for I/O redirection Indirect referencing of variables • New notation, introduced in version 2 of Bash ( example script) Iteration *** Job IDs, table jot, Emit a sequence of integers. Equivalent to seq. • Random sequence generation *** Keywords kill, terminate a process by process ID Appendix S. ASCII Table 830
- 837. Advanced Bash-Scripting Guide • Options (-l, -9) killall, terminate a process by name killall script in /etc/rc.d/init.d *** -le , less-than or equal integer comparison test let, setting and carrying out arithmetic operations on variables • C-style increment and decrement operators Limit string, in a here document $LINENO, variable indicating the line number where it appears in a script Link, file (using ln command) • Invoking script with multiple names, using ln • symbolic links, ln -s List constructs • And list • Or list Local variables • and recursion Localization Logical operators (&&, ||, etc.) Logout file, the ~/.bash_logout file Loopback device, mounting a file on a block device Loops • break loop control command • continue loop control command • C-style loop within double parentheses for loop while loop • do (keyword), begins execution of commands within a loop • done (keyword), terminates a loop Appendix S. ASCII Table 831
- 838. Advanced Bash-Scripting Guide • for loops for arg in [list]; do Command substitution to generate [list] Filename expansion in [list] Multiple parameters in each [list] element Omitting [list], defaults to positional parameters Parameterizing [list] Redirection • in, (keyword) preceding [list] in a for loop • Nested loops • Running a loop in the background, script example • Semicolon required, when do is on first line of loop for loop while loop • until loop until [ condition-is-true ]; do • while loop while [ condition ]; do Function call inside test brackets Multiple conditions Omitting test brackets Redirection while read construct • Which type of loop to use Loopback devices • In /dev directory • Mounting an ISO image -lt , less-than integer comparison test *** m4, macro processing language Appendix S. ASCII Table 832
- 839. Advanced Bash-Scripting Guide $MACHTYPE, Machine type Magic number, marker at the head of a file indicating the file type Makefile, file containing the list of dependencies used by make command man, manual page (lookup) • Man page editor (script) mapfile builtin, loads an array with a text file Math commands Meta-meaning Modulo, arithmetic remainder operator • Application: Generating prime numbers Mortgage calculations, example script *** -n String not null test Named pipe, a temporary FIFO buffer • Example script nc, netcat, a toolkit for TCP and UDP ports -ne, not-equal-to integer comparison test Negation operator, !, reverses the sense of a test netstat, Network statistics nl, a filter to number lines of text Noclobber, -C option to Bash to prevent overwriting of files NOT logical operator, ! null variable assignment, avoiding *** -o Logical OR compound comparison test octal, base-8 numbers Appendix S. ASCII Table 833
- 840. Advanced Bash-Scripting Guide od, octal dump $OLDPWD Previous working directory openssl encryption utility Operator • Definition of • Precedence Options, passed to shell or script on command line or by set command Or list Or logical operator, || *** Parameter substitution • ${parameter+alt_value} ${parameter:+alt_value} Alternate value of parameter, if set • ${parameter-default} ${parameter:-default} ${parameter=default} ${parameter:=default} Default parameters • ${!varprefix*} ${!varprefix@} Parameter name match • ${parameter?err_msg} Parameter-unset message • ${parameter} Value of parameter • Case modification (version 4+ of Bash). • Script example • Table of parameter substitution Parent / child process problem, a child process cannot export variables to a parent process Appendix S. ASCII Table 834
- 841. Advanced Bash-Scripting Guide Parentheses • Command group • Enclose group of Extended Regular Expressions • Double parentheses, in arithmetic expansion $PATH, the path (location of system binaries) Perl, programming language • Combined in the same file with a Bash script • Embedded in a Bash script Perquackey-type anagramming game (Quackey script) Petals Around the Rose PID, Process ID, an identification number assigned to a running process. Pipe, | , a device for passing the output of a command to another command or to the shell • Avoiding unnecessary commands in a pipe • Comments embedded within • Exit status of a pipe • Pipefail, set -o pipefail option to indicate exit status within a pipe • $PIPESTATUS, exit status of last executed pipe • Piping output of a command to a script • Redirecting stdin, rather than using cat in a pipe Pitfalls • - (dash) is not redirection operator • // (double forward slash), behavior of cd command toward • #!/bin/sh script header disables extended Bash features • Abuse of cat • CGI programming, using scripts for • Closing limit string in a here document, indenting • DOS-type newlines (rn) crash a script • Double-quoting the backslash () character • eval, risk of using • Execute permission lacking for commands within a script • Export problem, child process to parent process • Extended Bash features not available • Failing to quote variables within test brackets • GNU command set, in cross-platform scripts • let misuse: attempting to set string variables • Multiple echo statements in a function whose output is captured • null variable assignment • Numerical and string comparison operators not equivalent = and -eq not interchangeable Appendix S. ASCII Table 835
- 842. Advanced Bash-Scripting Guide • Omitting terminal semicolon, in a curly-bracketed code block • Piping echo to a loop echo to read (however, this problem can be circumvented) tail -f to grep • Preserving whitespace within a variable, unintended consequences • suid commands inside a script • Undocumented Bash features, danger of • Uninitialized variables • Variable names, inappropriate • Variables in a subshell, scope limited • Subshell in while-read loop • Whitespace, misuse of Pointers • and file descriptors • and functions • and indirect references • and variables Portability issues in shell scripting • Setting path and umask • A test suite script (Bash versus classic Bourne shell) • Using whatis Positional parameters • $@, as separate words • $*, as a single word • in functions POSIX, Portable Operating System Interface / UNIX • --posix option • 1003.2 standard • Character classes $PPID, process ID of parent process Precedence, operator Prepending lines at head of a file, script example Prime numbers • Generating primes using the factor command Appendix S. ASCII Table 836
- 843. Advanced Bash-Scripting Guide • Generating primes using the modulo operator • Sieve of Eratosthenes, example script printf, formatted print command /proc directory • Running processes, files describing • Writing to files in /proc, warning Process • Child process • Parent process • Process ID (PID) Process substitution • To compare contents of directories • To supply stdin of a command • Template • while-read loop without a subshell Programmable completion (tab expansion) Prompt • $PS1, Main prompt, seen at command line • $PS2, Secondary prompt Pseudo-code, as problem-solving method $PWD, Current working directory *** Quackey, a Perquackey-type anagramming game (script) Question mark, ? • Character match in an Extended Regular Expression • Single-character wild card, in globbing • In a C-style Trinary operator Quoting • Character string • Variables within test brackets • Whitespace, using quoting to preserve Appendix S. ASCII Table 837
- 844. Advanced Bash-Scripting Guide *** Random numbers • /dev/urandom • rand(), random function in awk • $RANDOM, Bash function that returns a pseudorandom integer • Random sequence generation, using date command • Random sequence generation, using jot • Random string, generating rcs read, set value of a variable from stdin • Detecting arrow keys • Options • Piping output of cat to read • "Prepending" text • Problems piping echo to read • Redirection from a file to read • $REPLY, default read variable • Timed input • while read construct readline library Recursion • Demonstration of • Factorial • Fibonacci sequence • Local variables • Script calling itself recursively • Towers of Hanoi Redirection • Code blocks • exec <filename, to reassign file descriptors • Introductory-level explanation of I/O redirection • Open a file for both reading and writing <>filename • read input redirected from a file • stderr to stdout 2>&1 • stdin / stdout, using - Appendix S. ASCII Table 838
- 845. Advanced Bash-Scripting Guide • stdinof a function • stdout to a file > ... >> • stdout to file descriptor j >&j • file descriptori to file descriptor j i>&j • stdout of a command to stderr >&2 • stdout and stderr of a command to a file &> • tee, redirect to a file output of command(s) partway through a pipe Reference Cards • Miscellaneous constructs • Parameter substitution/expansion • Special shell variables • String operations • Test operators Binary comparison Files Regular Expressions • ^ (caret) Beginning-of-line • $ (dollar sign) Anchor • . (dot) Match single character • * (asterisk) Any number of characters • [ ] (brackets) Enclose character set to match • (backslash) Escape, interpret following character literally • < ... > (angle brackets, escaped) Word boundary • Extended REs + Character match { } Escaped "curly" brackets [: :] POSIX character classes $REPLY, Default value associated with read command Restricted shell, shell (or script) with certain commands disabled Appendix S. ASCII Table 839
- 846. Advanced Bash-Scripting Guide return, command that terminates a function run-parts • Running scripts in sequence, without user intervention *** Scope of a variable, definition Script options, set at command line Scripting routines, library of useful definitions and functions Secondary prompt, $PS2 Security issues • nmap, network mapper / port scanner • sudo • suid commands inside a script • Viruses, trojans, and worms in scripts • Writing secure scripts sed, pattern-based programming language • Table, basic operators • Table, examples of operators select, construct for menu building • in list omitted Semaphore Semicolon required, when do keyword is on first line of loop • When terminating curly-bracketed code block seq, Emit a sequence of integers. Equivalent to jot. set, Change value of internal script variables Shell script, definition of Shell wrapper, script embedding a command or utility shift, reassigning positional parameters $SHLVL, shell level, depth to which the shell (or script) is nested Appendix S. ASCII Table 840
- 847. Advanced Bash-Scripting Guide shopt, change shell options Signal, a message sent to a process Simulations • Brownian motion • Galton board • Horserace • Life, game of • PI, approximating by firing cannonballs • Pushdown stack Single quotes (' ... ') strong quoting Socket, a communication node associated with an I/O port Sorting • Bubble sort • Insertion sort source, execute a script or, within a script, import a file • Passing positional parameters Spam, dealing with • Example script • Example script • Example script • Example script Special characters Stack • Definition • Emulating a push-down stack, example script Standard Deviation, example script Startup files, Bash stdin and stdout Stopwatch, example script Strings • =~ String match operator Appendix S. ASCII Table 841
- 848. Advanced Bash-Scripting Guide • Comparison • Length ${#string} • Manipulation • Manipulation, using awk • Null string, testing for • Protecting strings from expansion and/or reinterpretation, script example Unprotecting strings, script example • strchr(), equivalent of • strlen(), equivalent of • strings command, find printable strings in a binary or data file • Substring extraction ${string:position} ${string:position:length} Using expr • Substring index (numerical position in string) • Substring matching, using expr • Substring removal ${var#Pattern} ${var##Pattern} ${var%Pattern} ${var%%Pattern} • Substring replacement ${string/substring/replacement} ${string//substring/replacement} ${string/#substring/replacement} ${string/%substring/replacement} Script example • Table of string/substring manipulation and extraction operators Strong quoting ' ... ' Stylesheet for writing scripts Subshell • Command list within parentheses Appendix S. ASCII Table 842
- 849. Advanced Bash-Scripting Guide • Variables, $BASH_SUBSHELL and $SHLVL • Variables in a subshell scope limited, but ... ... can be accessed outside the subshell? su Substitute user, log on as a different user or as root suid (set user id) file flag • suid commands inside a script, not advisable Symbolic links Swapfiles *** Tab completion Table lookup, script example tail, echo to stdout lines at the (tail) end of a text file tar, archiving utility tee, redirect to a file output of command(s) partway through a pipe Terminals • setserial • setterm • stty • tput • wall test command • Bash builtin • external command, /usr/bin/test (equivalent to /usr/bin/[) Test constructs Test operators • -a Logical AND compound comparison • -e File exists • -eq is-equal-to (integer comparison) • -f File is a regular file • -ge greater-than or equal (integer comparison) Appendix S. ASCII Table 843
- 850. Advanced Bash-Scripting Guide • -gt greater-than (integer comparison) • -le less-than or equal (integer comparison) • -lt less-than (integer comparison) • -n not-zero-length (string comparison) • -ne not-equal-to (integer comparison) • -o Logical OR compound comparison • -u suid flag set, file test • -z is-zero-length (string comparison) • = is-equal-to (string comparison) == is-equal-to (string comparison) • < less-than (string comparison) • < less-than, (integer comparison, within double parentheses) • <= less-than-or-equal, (integer comparison, within double parentheses) • > greater-than (string comparison) • > greater-than, (integer comparison, within double parentheses) • >= greater-than-or-equal, (integer comparison, within double parentheses) • || Logical OR • && Logical AND • ! Negation operator, inverts exit status of a test != not-equal-to (string comparison) • Tables of test operators Binary comparison File Text and text file processing Time / Date Timed input • Using read -t • Using stty • Using timing loop • Using $TMOUT Tips and hints for Bash scripts • Array, as return value from a function • Capturing the return value of a function, using echo • Comment blocks Using anonymous here documents Using if-then constructs • Comment headers, special purpose • C-style syntax , for manipulating variables • Double-spacing a text file Appendix S. ASCII Table 844
- 851. Advanced Bash-Scripting Guide • Filenames prefixed with a dash, removing • Filter, feeding output back to same filter • Function return value workarounds • if-grep test fixup • Library of useful definitions and functions • null variable assignment, avoiding • Passing an array to a function • Prepending lines at head of a file • Progress bar template • Pseudo-code • rcs • Redirecting a test to /dev/null to suppress output • Running scripts in sequence without user intervention, using run-parts • Script as embedded command • Script portability Setting path and umask Using whatis • Setting script variable to a block of embedded sed or awk code • Subshell variable, accessing outside the subshell • Testing a variable to see if it contains only digits • Testing whether a command exists, using type • Tracking script usage • while-read loop without a subshell • Widgets, invoking from a script $TMOUT, Timeout interval Token, a symbol that may expand to a keyword or command tput, terminal-control command tr, character translation filter • DOS to Unix text file conversion • Options • Soundex, example script • Variants Trap, specifying an action upon receipt of a signal Trinary operator, C-style, var>10?88:99 • in double-parentheses construct • in let construct true, returns successful (0) exit status typeset builtin Appendix S. ASCII Table 845
- 852. Advanced Bash-Scripting Guide • options *** $UID, User ID number unalias, to remove an alias uname, output system information Uninitialized variables uniq, filter to remove duplicate lines from a sorted file unset, delete a shell variable until loop until [ condition-is-true ]; do *** Variables • Array operations on • Assignment Script example Script example Script example • Bash internal variables • Block of sed or awk code, setting a variable to • C-style increment/decrement/trinary operations • Change value of internal script variables using set • declare, to modify the properties of variables • Deleting a shell variable using unset • Environmental • Expansion / Substring replacement operators • Indirect referencing eval variable1=$$variable2 Newer notation ${!variable} • Integer • Integer / string (variables are untyped) • Length Appendix S. ASCII Table 846
- 853. Advanced Bash-Scripting Guide ${#var} • Lvalue • Manipulating and expanding • Name and value of a variable, distinguishing between • Null string, testing for • Null variable assignment, avoiding • Quoting within test brackets to preserve whitespace • rvalue • Setting to null value • In subshell not visible to parent shell • Testing a variable if it contains only digits • Typing, restricting the properties of a variable • Undeclared, error message • Uninitialized • Unquoted variable, splitting • Unsetting • Untyped *** wait, suspend script execution • To remedy script hang Weak quoting " ... " while loop while [ condition ]; do • C-style syntax • Calling a function within test brackets • Multiple conditions • Omitting test brackets • while read construct Avoiding a subshell Whitespace, spaces, tabs, and newline characters • $IFS defaults to • Inappropriate use of • Preceding closing limit string in a here document, error • Preceding script comments • Quoting, to preserve whitespace within strings or variables • [:space:], POSIX character class Appendix S. ASCII Table 847
- 854. Advanced Bash-Scripting Guide who, information about logged on users •w • whoami • logname Widgets Wild card characters • Asterisk * • In [list] constructs • Question mark ? • Will not match dot files Word splitting • Definition • Resulting from command substitution Wrapper, shell *** xargs, Filter for grouping arguments • Curly brackets • Limiting arguments passed • Options • Processes arguments one at a time • Whitespace, handling *** yes • Emulation *** -z String is null Zombie, a process that has terminated, but not yet been killed by its parent Notes [1] These are referred to as builtins, features internal to the shell. [2] Although recursion is possible in a shell script, it tends to be slow and its implementation is often an ugly kludge. [3] Many of the features of ksh88, and even a few from the updated ksh93 have been merged into Bash. Appendix S. ASCII Table 848
- 855. Advanced Bash-Scripting Guide [4] By convention, user-written shell scripts that are Bourne shell compliant generally take a name with a .sh extension. System scripts, such as those found in /etc/rc.d, do not conform to this nomenclature. [5] Also seen in the literature as she-bang or sh-bang. This derives from the concatenation of the tokens sharp (#) and bang (!). [6] Some flavors of UNIX (those based on 4.2 BSD) allegedly take a four-byte magic number, requiring a blank after the ! -- #! /bin/sh. According to Sven Mascheck this is probably a myth. [7] The #! line in a shell script will be the first thing the command interpreter (sh or bash) sees. Since this line begins with a #, it will be correctly interpreted as a comment when the command interpreter finally executes the script. The line has already served its purpose - calling the command interpreter. If, in fact, the script includes an extra #! line, then bash will interpret it as a comment. #!/bin/bash echo "Part 1 of script." a=1 #!/bin/bash # This does *not* launch a new script. echo "Part 2 of script." echo $a # Value of $a stays at 1. [8] This allows some cute tricks. #!/bin/rm # Self-deleting script. # Nothing much seems to happen when you run this... except that the file disappears. WHATEVER=85 echo "This line will never print (betcha!)." exit $WHATEVER # Doesn't matter. The script will not exit here. # Try an echo $? after script termination. # You'll get a 0, not a 85. Also, try starting a README file with a #!/bin/more, and making it executable. The result is a self-listing documentation file. (A here document using cat is possibly a better alternative -- see Example 18-3). [9] Portable Operating System Interface, an attempt to standardize UNIX-like OSes. The POSIX specifications are listed on the Open Group site. [10] To avoid this possibility, a script may begin with a #!/bin/env bash sha-bang line. This may be useful on UNIX machines where bash is not located in /bin [11] If Bash is your default shell, then the #! isn't necessary at the beginning of a script. However, if launching a script from a different shell, such as tcsh, then you will need the #!. [12] Caution: invoking a Bash script by sh scriptname turns off Bash-specific extensions, and the script may therefore fail to execute. [13] A script needs read, as well as execute permission for it to run, since the shell needs to be able to read it. [14] Why not simply invoke the script with scriptname? If the directory you are in ($PWD) is where scriptname is located, why doesn't this work? This fails because, for security reasons, the current Appendix S. ASCII Table 849
- 856. Advanced Bash-Scripting Guide directory (./) is not by default included in a user's $PATH. It is therefore necessary to explicitly invoke the script in the current directory with a ./scriptname. [15] An operator is an agent that carries out an operation. Some examples are the common arithmetic operators, + - * /. In Bash, there is some overlap between the concepts of operator and keyword. [16] A PID, or process ID, is a number assigned to a running process. The PIDs of running processes may be viewed with a ps command. Definition: A process is a currently executing command (or program), sometimes referred to as a job. [17] The shell does the brace expansion. The command itself acts upon the result of the expansion. [18] Exception: a code block in braces as part of a pipe may run as a subshell. ls | { read firstline; read secondline; } # Error. The code block in braces runs as a subshell, #+ so the output of "ls" cannot be passed to variables within the block. echo "First line is $firstline; second line is $secondline" # Won't work. # Thanks, S.C. [19] Even as in olden times a philtre denoted a potion alleged to have magical transformative powers, so does a UNIX filter transform its target in (roughly) analogous fashion. (The coder who comes up with a "love philtre" that runs on a Linux machine will likely win accolades and honors.) [20] Bash stores a list of commands previously issued from the command-line in a buffer, or memory space, for recall with the builtin history commands. [21] A linefeed (newline) is also a whitespace character. This explains why a blank line, consisting only of a linefeed, is considered whitespace. [22] Technically, the name of a variable is called an lvalue, meaning that it appears on the left side of an assignment statment, as in VARIABLE=23. A variable's value is an rvalue, meaning that it appears on the right side of an assignment statement, as in VAR2=$VARIABLE. A variable's name is, in fact, a reference, a pointer to the memory location(s) where the actual data associated with that variable is kept. [23] Note that functions also take positional parameters. [24] The process calling the script sets the $0 parameter. By convention, this parameter is the name of the script. See the manpage (manual page) for execv. From the command-line, however, $0 is the name of the shell. bash$ echo $0 bash tcsh% echo $0 tcsh [25] Unless there is a file named first in the current working directory. Yet another reason to quote. (Thank you, Harald Koenig, for pointing this out. [26] Encapsulating "!" within double quotes gives an error when used from the command line. This is interpreted as a history command. Within a script, though, this problem does not occur, since the Bash Appendix S. ASCII Table 850
- 857. Advanced Bash-Scripting Guide history mechanism is disabled then. Of more concern is the apparently inconsistent behavior of within double quotes, and especially following an echo -e command. bash$ echo hello! hello! bash$ echo "hello!" hello! bash$ echo > bash$ echo "" > bash$ echo a a bash$ echo "a" a bash$ echo xty xty bash$ echo "xty" xty bash$ echo -e xty xty bash$ echo -e "xty" x y Double quotes following an echo sometimes escape . Moreover, the -e option to echo causes the "t" to be interpreted as a tab. (Thank you, Wayne Pollock, for pointing this out, and Geoff Lee and Daniel Barclay for explaining it.) [27] "Word splitting," in this context, means dividing a character string into separate and discrete arguments. [28] In those instances when there is no return terminating the function. [29] A token is a symbol or short string with a special meaning attached to it (a meta-meaning). In Bash, certain tokens, such as [ and . (dot-command), may expand to keywords and commands. [30] Per the 1913 edition of Webster's Dictionary: Deprecate ... To pray against, as an evil; to seek to avert by prayer; to desire the removal of; to seek deliverance from; to express deep regret for; to disapprove of strongly. [31] Be aware that suid binaries may open security holes. The suid flag has no effect on shell scripts. [32] On modern UNIX systems, the sticky bit is no longer used for files, only on directories. [33] As S.C. points out, in a compound test, even quoting the string variable might not suffice. [ -n "$string" -o "$a" = "$b" ] may cause an error with some versions of Bash if $string is Appendix S. ASCII Table 851
- 858. Advanced Bash-Scripting Guide empty. The safe way is to append an extra character to possibly empty variables, [ "x$string" != x -o "x$a" = "x$b" ] (the "x's" cancel out). [34] Side effects are, of course, unintended -- and usually undesirable -- consequences. [35] A stack register is a set of consecutive memory locations, such that the values stored (pushed) are retrieved (popped) in reverse order. The last value stored is the first retrieved. This is sometimes called a LIFO (last-in-first-out) or pushdown stack. [36] The PID of the currently running script is $$, of course. [37] Somewhat analogous to recursion, in this context nesting refers to a pattern embedded within a larger pattern. One of the definitions of nest, according to the 1913 edition of Webster's Dictionary, illustrates this beautifully: "A collection of boxes, cases, or the like, of graduated size, each put within the one next larger." [38] The words "argument" and "parameter" are often used interchangeably. In the context of this document, they have the same precise meaning: a variable passed to a script or function. [39] Within a script, inside a subshell, $$ returns the PID of the script, not the subshell. [40] This applies to either command-line arguments or parameters passed to a function. [41] Note that $substring and $replacement may refer to either literal strings or variables, depending on context. See the first usage example. [42] If $parameter is null in a non-interactive script, it will terminate with a 127 exit status (the Bash error code for "command not found"). [43] In this context, typing a variable means to classify it and restrict its properties. For example, a variable declared or typed as an integer is no longer available for string operations. declare -i intvar intvar=23 echo "$intvar" # 23 intvar=stringval echo "$intvar" # 0 [44] True "randomness," insofar as it exists at all, can only be found in certain incompletely understood natural phenomena, such as radioactive decay. Computers only simulate randomness, and computer-generated sequences of "random" numbers are therefore referred to as pseudorandom. [45] The seed of a computer-generated pseudorandom number series can be considered an identification label. For example, think of the pseudorandom series with a seed of 23 as Series #23. A property of a pseurandom number series is the length of the cycle before it starts repeating itself. A good pseurandom generator will produce series with very long cycles. [46] Iteration: Repeated execution of a command or group of commands, usually -- but not always, while a given condition holds, or until a given condition is met. [47] These are shell builtins, whereas other loop commands, such as while and case, are keywords. [48] For purposes of command substitution, a command may be an external system command, an internal scripting builtin, or even a script function. [49] In a more technically correct sense, command substitution extracts the stdout of a command, then assigns it to a variable using the = operator. [50] In fact, nesting with backticks is also possible, but only by escaping the inner backticks, as John Default points out. word_count=` wc -w `echo * | awk '{print $8}'` ` Appendix S. ASCII Table 852
- 859. Advanced Bash-Scripting Guide [51] As Nathan Coulter points out, "while forking a process is a low-cost operation, executing a new program in the newly-forked child process adds more overhead." [52] An exception to this is the time command, listed in the official Bash documentation as a keyword ("reserved word"). [53] Note that let cannot be used for setting string variables. [54] To Export information is to make it available in a more general context. See also scope. [55] An option is an argument that acts as a flag, switching script behaviors on or off. The argument associated with a particular option indicates the behavior that the option (flag) switches on or off. [56] Technically, an exit only terminates the process (or shell) in which it is running, not the parent process. [57] Unless the exec is used to reassign file descriptors. [58] Hashing is a method of creating lookup keys for data stored in a table. The data items themselves are "scrambled" to create keys, using one of a number of simple mathematical algorithms (methods, or recipes). An advantage of hashing is that it is fast. A disadvantage is that collisions -- where a single key maps to more than one data item -- are possible. For examples of hashing see Example A-20 and Example A-21. [59] The readline library is what Bash uses for reading input in an interactive shell. [60] The C source for a number of loadable builtins is typically found in the /usr/share/doc/bash-?.??/functions directory. Note that the -f option to enable is not portable to all systems. [61] The same effect as autoload can be achieved with typeset -fu. [62] Dotfiles are files whose names begin with a dot, such as ~/.Xdefaults. Such filenames do not appear in a normal ls listing (although an ls -a will show them), and they cannot be deleted by an accidental rm -rf *. Dotfiles are generally used as setup and configuration files in a user's home directory. [63] This particular feature may not yet be implemented in the version of the ext2/ext3 filesystem installed on your system. Check the documentation for your Linux distro. [64] And even when xargs is not strictly necessary, it can speed up execution of a command involving batch-processing of multiple files. [65] This is only true of the GNU version of tr, not the generic version often found on commercial UNIX systems. [66] An archive, in the sense discussed here, is simply a set of related files stored in a single location. [67] A tar czvf ArchiveName.tar.gz * will include dotfiles in subdirectories below the current working directory. This is an undocumented GNU tar "feature." [68] The checksum may be expressed as a hexadecimal number, or to some other base. [69] For even better security, use the sha256sum, sha512, and sha1pass commands. [70] This is a symmetric block cipher, used to encrypt files on a single system or local network, as opposed to the public key cipher class, of which pgp is a well-known example. [71] Creates a temporary directory when invoked with the -d option. [72] Appendix S. ASCII Table 853
- 860. Advanced Bash-Scripting Guide A daemon is a background process not attached to a terminal session. Daemons perform designated services either at specified times or explicitly triggered by certain events. The word "daemon" means ghost in Greek, and there is certainly something mysterious, almost supernatural, about the way UNIX daemons wander about behind the scenes, silently carrying out their appointed tasks. [73] This is actually a script adapted from the Debian Linux distribution. [74] The print queue is the group of jobs "waiting in line" to be printed. [75] For an excellent overview of this topic, see Andy Vaught's article, Introduction to Named Pipes, in the September, 1997 issue of Linux Journal. [76] EBCDIC (pronounced "ebb-sid-ick") is an acronym for Extended Binary Coded Decimal Interchange Code. This is an IBM data format no longer in much use. A bizarre application of the conv=ebcdic option of dd is as a quick 'n easy, but not very secure text file encoder. cat $file | dd conv=swab,ebcdic > $file_encrypted # Encode (looks like gibberish). # Might as well switch bytes (swab), too, for a little extra obscurity. cat $file_encrypted | dd conv=swab,ascii > $file_plaintext # Decode. [77] A macro is a symbolic constant that expands into a command string or a set of operations on parameters. Simply put, it's a shortcut or abbreviation. [78] This is the case on a Linux machine or a UNIX system with disk quotas. [79] The userdel command will fail if the particular user being deleted is still logged on. [80] For more detail on burning CDRs, see Alex Withers' article, Creating CDs, in the October, 1999 issue of Linux Journal. [81] The -c option to mke2fs also invokes a check for bad blocks. [82] Since only root has write permission in the /var/lock directory, a user script cannot set a lock file there. [83] Operators of single-user Linux systems generally prefer something simpler for backups, such as tar. [84] As of the version 4 update of Bash, the -f and -c options take a block size of 512 when in POSIX mode. Additionally, there are two new options: -b for socket buffer size, and -T for the limit on the number of threads. [85] NAND is the logical not-and operator. Its effect is somewhat similar to subtraction. [86] In Bash and other Bourne shell derivatives, it is possible to set variables in a single command's environment. var1=value1 var2=value2 commandXXX # $var1 and $var2 set in the environment of 'commandXXX' only. [87] The killall system script should not be confused with the killall command in /usr/bin. [88] A meta-meaning is the meaning of a term or expression on a higher level of abstraction. For example, the literal meaning of regular expression is an ordinary expression that conforms to accepted usage. The meta-meaning is drastically different, as discussed at length in this chapter. [89] Since sed, awk, and grep process single lines, there will usually not be a newline to match. In those cases where there is a newline in a multiple line expression, the dot will match the newline. #!/bin/bash Appendix S. ASCII Table 854
- 861. Advanced Bash-Scripting Guide sed -e 'N;s/.*/[&]/' << EOF # Here Document line1 line2 EOF # OUTPUT: # [line1 # line2] echo awk '{ $0=$1 "n" $2; if (/line.1/) {print}}' << EOF line 1 line 2 EOF # OUTPUT: # line # 1 # Thanks, S.C. exit 0 [90] Filename expansion means expanding filename patterns or templates containing special characters. For example, example.??? might expand to example.001 and/or example.txt. [91] A wild card character, analogous to a wild card in poker, can represent (almost) any other character. [92] Filename expansion can match dotfiles, but only if the pattern explicitly includes the dot as a literal character. ~/[.]bashrc # Will not expand to ~/.bashrc ~/?bashrc # Neither will this. # Wild cards and metacharacters will NOT #+ expand to a dot in globbing. ~/.[b]ashrc # Will expand to ~/.bashrc ~/.ba?hrc # Likewise. ~/.bashr* # Likewise. # Setting the "dotglob" option turns this off. # Thanks, S.C. [93] By convention in UNIX and Linux, data streams and peripherals (device files) are treated as files, in a fashion analogous to ordinary files. [94] A file descriptor is simply a number that the operating system assigns to an open file to keep track of it. Consider it a simplified type of file pointer. It is analogous to a file handle in C. [95] Using file descriptor 5 might cause problems. When Bash creates a child process, as with exec, the child inherits fd 5 (see Chet Ramey's archived e-mail, SUBJECT: RE: File descriptor 5 is held open). Best leave this particular fd alone. [96] An external command invoked with an exec does not (usually) fork off a subprocess / subshell. [97] This has the same effect as a named pipe (temp file), and, in fact, named pipes were at one time used in process substitution. [98] The return command is a Bash builtin. [99] Otherwise known as redundancy. Appendix S. ASCII Table 855
- 862. Advanced Bash-Scripting Guide [100] Otherwise known as tautology. [101] Otherwise known as a metaphor. [102] Otherwise known as a recursive function. [103] Too many levels of recursion may crash a script with a segfault. #!/bin/bash # Warning: Running this script could possibly lock up your system! # If you're lucky, it will segfault before using up all available memory. recursive_function () { echo "$1" # Makes the function do something, and hastens the segfault. (( $1 < $2 )) && recursive_function $(( $1 + 1 )) $2; # As long as 1st parameter is less than 2nd, #+ increment 1st and recurse. } recursive_function 1 50000 # Recurse 50,000 levels! # Most likely segfaults (depending on stack size, set by ulimit -m). # Recursion this deep might cause even a C program to segfault, #+ by using up all the memory allotted to the stack. echo "This will probably not print." exit 0 # This script will not exit normally. # Thanks, Stéphane Chazelas. [104] ... as the first word of a command string. Obviously, an alias is only meaningful at the beginning of a command. [105] However, aliases do seem to expand positional parameters. [106] The entries in /dev provide mount points for physical and virtual devices. These entries use very little drive space. Some devices, such as /dev/null, /dev/zero, and /dev/urandom are virtual. They are not actual physical devices and exist only in software. [107] A block device reads and/or writes data in chunks, or blocks, in contrast to a character device, which acesses data in character units. Examples of block devices are hard drives, CDROM drives, and flash drives. Examples of character devices are keyboards, modems, sound cards. [108] Of course, the mount point /mnt/flashdrive must exist. If not, then, as root, mkdir /mnt/flashdrive. To actually mount the drive, use the following command: mount /mnt/flashdrive Newer Linux distros automount flash drives in the /media directory without user intervention. [109] Certain system commands, such as procinfo, free, vmstat, lsdev, and uptime do this as well. [110] By convention, signal 0 is assigned to exit. [111] Setting the suid permission on the script itself has no effect in Linux and most other UNIX flavors. [112] In this context, "magic numbers" have an entirely different meaning than the magic numbers used to designate file types. [113] Precedence, in this context, has approximately the same meaning as priority Appendix S. ASCII Table 856
- 863. Advanced Bash-Scripting Guide [114] Quite a number of Linux utilities are, in fact, shell wrappers. Some examples are /usr/bin/pdf2ps, /usr/bin/batch, and /usr/bin/xmkmf. [115] ANSI is, of course, the acronym for the American National Standards Institute. This august body establishes and maintains various technical and industrial standards. [116] This usually means liberal use of functions. [117] See Marius van Oers' article, Unix Shell Scripting Malware, and also the Denning reference in the bibliography. [118] Or, better yet, #!/bin/env sh. [119] Copyright 1995-2009 by Chester Ramey. [120] This only works with pipes and certain other special files. [121] But only in conjunction with readline, i.e., from the command-line. [122] And while you're at it, consider fixing the notorious piped read problem. [123] This is the notorious flog it to death technique. [124] In fact, he is a school dropout and has no formal credentials or qualifications whatsoever. Aside from the ABS Guide, his main claim to fame is a First Place in the sack race at the Colfax Elementary School Field Day in June, 1958. [125] Those who can, do. Those who can't . . . get an MCSE. [126] Sometimes it seems as if he has spent his entire life flouting conventional wisdom and defying the sonorous Voice of Authority: "Hey, you can't do that!" [127] E-mails from certain spam-infested TLDs (61, 202, 211, 218, 220, etc.) will be trapped by spam filters and deleted unread. If your ISP is located on one of these, please use a Webmail account to contact the author. [128] Well, if you absolutely insist, you can try modifying Example A-44 to suit your purposes. [129] It was hard to resist the obvious pun. No slight intended, since the book is a pretty decent introduction to the basic concepts of shell scripting. [130] Sed executes without user intervention. [131] If no address range is specified, the default is all lines. [132] Its name derives from the initials of its authors, Aho, Weinberg, and Kernighan. [133] Out of range exit values can result in unexpected exit codes. An exit value greater than 255 returns an exit code modulo 256. For example, exit 3809 gives an exit code of 225 (3809 % 256 = 225). [134] An update of /usr/include/sysexits.h allocates previously unused exit codes from 64 - 78. It may be anticipated that the range of unallotted exit codes will be further restricted in the future. The author of this document will not do fixups on the scripting examples to conform to the changing standard. This should not cause any problems, since there is no overlap or conflict in usage of exit codes between compiled C/C++ binaries and shell scripts. [135] This does not apply to csh, tcsh, and other shells not related to or descended from the classic Bourne shell (sh). [136] In older versions of UNIX, passwords were stored in /etc/passwd, and that explains the name of the file. [137] Some early UNIX systems had a fast, small-capacity fixed disk (containing /, the root partition), and a second drive which was larger, but slower (containing /usr and other partitions). The most frequently used programs and utilities therefore resided on the small-but-fast drive, in /bin, and the others on the slower drive, in /usr/bin. This likewise accounts for the split between /sbin and /usr/sbin, /lib and /usr/lib, etc. Appendix S. ASCII Table 857
- 864. Advanced Bash-Scripting Guide [138] This works only from the command line, of course, and not within a script. [139] Normally the default parameter completion files reside in either the /etc/profile.d directory or in /etc/bash_completion. These autoload on system startup. So, after writing a useful completion script, you might wish to move it (as root, of course) to one of these directories. [140] It has been extensively documented that programmers are willing to put in long hours of effort in order to save ten minutes of "unnecessary" labor. This is known as optimization. [141] Various readers have suggested modifications of the above batch file to prettify it and make it more compact and efficient. In the opinion of the ABS Guide author, this is wasted effort. A Bash script can access a DOS filesystem, or even an NTFS partition (with the help of ntfs-3g) to do batch or scripted operations. [142] For all you fine people who failed second-year algebra, a determinant is a numerical quantity associated with a multidimensional matrix (array of numbers). For the simple case of a 2 x 2 determinant: |a b| |b a| The solution is a*a - b*b, where "a" and "b" represent numbers. [143] A printed edition of a substantively rewritten version of the book will be released in fall of 2010. [144] The author intends that this book be released into the Public Domain after a period of 14 years from initial publication, that is, in 2014. In the early years of the American republic this was the duration statutorily granted to a copyrighted work. Appendix S. ASCII Table 858