ANALYSIS ON CLASS-A VOLTAGE FOLLOWER
1 like1,135 views
This paper analyzes various types of voltage followers, emphasizing their advantages, limitations, and applications in analog circuits. It outlines the operational principles of voltage followers as buffers to transfer voltage between high and low impedance circuits, describing ideal characteristics such as high input impedance and low output impedance. The study also discusses different voltage follower topologies, including basic and flipped voltage followers, and concludes with design considerations based on specific application requirements.
![Analysis of Class-A Voltage Follower
(J4R/ Volume 01 / Issue 01 / 003)
All rights reserved by www.journalforresearch.org 12
III. VOLTAGE FOLLOWER AS A CURRENT BUFFER
Typically, a current buffer amplifier is used for transferring a current from a first circuit, having a level of high output
impedance, to a second circuit to a low level of input impedance. The buffer amplifier interposed prevents the second charging
circuit of the first current circuit and unacceptably interfere with the desired operation. In the ideal current buffer in the diagram,
the output impedance is zero and the infinite input impedance. Again, other properties of the ideal buffer are: perfect linearity
whatever signal amplitudes; and an instantaneous response output, regardless of the speed of the input signal.
Fig. 2: Voltage Follower
Voltage Follower must satisfy certain requirements.
These are:
High input impedance,
Low output impedance,
High bandwidth,
Low power dissipation,
Linearity and Unity voltage gain,
High current gain and power gain, etc.
IV. TOPOLOGIES OF VOLTAGE FOLLOWER
Basic Voltage Follower:A.
The simple design voltage follower is the basis source follower or source voltage follower. It is a common drain amplifier circuit
with a voltage gain of unity. The output the source terminal follows the input applied to the door. Therefore it is called as a
source follower. The diagram in circuit is shown in Fig.3. [6]
Fig. 3: Basic Voltage Follower
It is designed with the ideal source of PMOS and current. We can use current mirror also in place the power source. Source
follower can also be designed with the resistance connected between the source and supply. But it does not provide a constant
amount of current flowing through the source terminal of the PMOS. This results in non-linearity in the exit and we cannot get a
voltage gain of unity always. [2] it also has a high output impedance. Thus, the resistive configuration is not used. We can use
PMOS and NMOS as an expense. But the implemented with current mirror gives good results [1].
The most important parameters related to the voltage follower design in any technology are the voltage gain and output
impedance. For this circuit, the output impedance and the voltage gain is given by (1) and (2).
Ro = (1)
Av = (2)](https://image.slidesharecdn.com/j4rv1i10272-150925121614-lva1-app6891/85/ANALYSIS-ON-CLASS-A-VOLTAGE-FOLLOWER-2-320.jpg)
![Analysis of Class-A Voltage Follower
(J4R/ Volume 01 / Issue 01 / 003)
All rights reserved by www.journalforresearch.org 13
Here, gm indicates the transconductance. The index denotes the transconductance with body effect. The value of output
impedance can be reduced by increasing the body effect [1]. But, it reduces the voltage gain.
Transconductance and output impedance are inversely bonded to each other. Considering (3) and (4), we can say that to
increase transconductance and reduce production impedance, drain current ID must be increased. However, this leads to large
ratio W / L This is not acceptable in submicron technologies, since the main objective is to reduce the transistor size. In addition,
the power dissipation increases with an increase in the W/L [6].
√ (3)
= (4)
Flipped Voltage FollowerB.
It is essentially a cascade amplifier with negative feedback where the gate terminal of M1 is used as an input terminal and its
source as the output terminal. It is characterized by a very low output impedance due shunt feedback provided by M2, high low
supply requirement close to a transistor threshold voltage VTH , low static power dissipation and high gain bandwidth. The flipped
(inverted) voltage follower name is based on the fact that FVF is applied on the drain side than on the side of the source.
Variation of the output current is absorbed by transistor M2 which is current sensing transistor, while the current remains constant
M1, because of this source voltage of the gate of M1 is constant and remains low distortion even at high frequency. A practical
limitation of the FVF cell is that it gives very small input and output signal swing [15].
Fig. 4: Flipped Voltage Follower
It has high input impedance. Because of the low output impedance, there is a large supply capacity [5]. The damping capacity
of FVF is limited by the bias current source. For analysis of the FVF output impedance analysis in the open loop gain can be
used. There are two MOSFETs are used in the topology.
There transconductance are and respectively. The output impedance of FVF can be given by (5).
R0 = (5)
Minimum supply voltage required for flipped voltage follower is VTH+2VDSAT. The voltage follower output level is reversed
decreased VGS-2VDSAT [5]. It limits the output swing in deep submicron technology. This is the main disadvantage of this
topology.
Table-1 shows the comparison between two voltage followers
Table - 1
Comparision of Two Voltage Followers
Topology Output Impedance Output Voltage Swing
Basic Source Follower VDD-VGS-VDSAT
Flipped Voltage Follower VGS-2VDSAT
V. CONCLUSION
The simplest design is basic source follower. But, it has many limitations for deep-sub micron design. Flipped voltage follower
achieves low output impedance. But, it suffers from non-linearity due to feedback path. Basic source follower and flipped
voltage follower posses non-linear distortion, Other designs like super source follower, bulk-driven voltage follower, and class-
AB based voltage followers have also been designed to overcome non-linearity problem. But, selection of voltage follower is
dependent on application and requirements since, all designs have certain advantages and limitations.](https://image.slidesharecdn.com/j4rv1i10272-150925121614-lva1-app6891/85/ANALYSIS-ON-CLASS-A-VOLTAGE-FOLLOWER-3-320.jpg)
![Analysis of Class-A Voltage Follower
(J4R/ Volume 01 / Issue 01 / 003)
All rights reserved by www.journalforresearch.org 14
REFERENCES
[1] Behzad Razavi, “Design of Analog CMOS Integrated Circuits”, McGraw-Hill Publication, pp. 67-76, 2001.
[2] P.E.Allen and D.R.Holberg, “CMOS Analog Circuit Design”, Oxford University Press,2002.
[3] Carvajal R.G., Ramirez-Angulo J., Lopez-Martin A.J., Torralba A. Galan, J.A.G. Carlosena A. and Chavero F.M., “The Flipped Voltage Follower: A
Useful Cell for Low Voltage Low Power Circuit Design”, IEEE circuits and systems, pp. 1276-1291, July 2005.
[4] Gaurang P. Banker, Amisha P. Naik and N.M. Devashrayee, “Comparative Analysis of Low Power CMOS Class-A Voltage Followers with Current Mirror
as a Load”, International Journal of Electronics and Communication Technology (IJECT), “to appear” in vol.2 Issue. 2, June 2011.
[5] Neeraj Yadav, “Low Voltage Analog Circuit Design Based on the Flipped Voltage Follower”, IJECSE, vol. 1, no. 2, pp/ 258-273.ISSN.](https://image.slidesharecdn.com/j4rv1i10272-150925121614-lva1-app6891/85/ANALYSIS-ON-CLASS-A-VOLTAGE-FOLLOWER-4-320.jpg)
ANALYSIS ON CLASS-A VOLTAGE FOLLOWER
- 1. Journal for Research| Volume 01| Issue 01 | March 2015 ISSN: 2395-7549 All rights reserved by www.journalforresearch.org 11 Analysis of Class-A Voltage Follower Bhautik D. Pandya Hardik H. Makwana Assistant Professor Assistant Professor Department of Electronics and Communication Engineering Department of Electronics and Communication Engineering Narnarayan Shastri Institute of Technology, Ahmedabad Hasmukh Goshwami College of Engineering, Ahmedabad Abstract This paper describes about different types of voltage followers. Each follower has its own advantages and limitations. The voltage follower can be characterized with current mirror source current or it can be used as a ideal current source. Voltage Follower is one of the most important analog circuits required in many analog integrated circuits. Input impedance of op amp is very high, giving effective isolation of the output from the signal source. Keywords: Voltage Follower, Op-Amp, Buffer, Transconductance _______________________________________________________________________________________________________ I. INTRODUCTION THIS A voltage follower (also known as a unity gain amplifier, a buffer amplifier, and an isolation amplifier) is an operational amplifier circuit having a voltage gain of one. This means that the operational amplifier provides no signal amplification. The reason why it is called a voltage follower is because the output voltage follows the input voltage directly, means that the output voltage is the same as the input voltage. For example, if 10 V enters the operational amplifier as an input, output will be 10V. A voltage follower acts as a buffer, providing no amplification or attenuation of the signal. II. PURPOSE OF VOLTAGE FOLLOWER A voltage buffer amplifier is used to transfer a voltage from a first circuit, having a high output impedance level, to a second circuit with a low input impedance level. The interposed buffer amplifier prevents the second circuit from loading the first circuit unacceptably and interfering with its desired operation. In the ideal voltage buffer in the diagram, the input resistance is infinite, the output resistance zero (impedance of an ideal voltage source is zero). Other properties of the ideal buffer are: perfect linearity, regardless of signal amplitudes; and instant output response, regardless of the speed of the input signal. One may ask then what is the purpose of a voltage follower? Since it displays the same computer signals input, what is its purpose in a circuit? This will now be explained. Fig. 1: Power source feeds a low impedance load Operational amplifier circuit is a circuit having very high input impedance. Due to this high input impedance of voltage follower are used. This will in Fig.1. above. When a circuit has very high input impedance, very little current is drawn from the circuit. If you know Ohm's law, you know that the current, I = V / R. Thus, the higher the resistance, the less current is drawn from a power source. Thus, the power of the circuit is not affected when the current is input to a high impedance load. The above circuit is a circuit in which a power source feeds a low-impedance load. Voltage followers are important to buffer or isolate a low impedance load from a voltage source. This means that instead of connecting a relatively low value of the load resistor across the power source, the operational amplifier can be used to eliminate any charge that may occur. Thus, the power source will not load down. The circuit acts as a source of great tension with near zero internal impedance because it uses almost no power, still full voltage outputs.
- 2. Analysis of Class-A Voltage Follower (J4R/ Volume 01 / Issue 01 / 003) All rights reserved by www.journalforresearch.org 12 III. VOLTAGE FOLLOWER AS A CURRENT BUFFER Typically, a current buffer amplifier is used for transferring a current from a first circuit, having a level of high output impedance, to a second circuit to a low level of input impedance. The buffer amplifier interposed prevents the second charging circuit of the first current circuit and unacceptably interfere with the desired operation. In the ideal current buffer in the diagram, the output impedance is zero and the infinite input impedance. Again, other properties of the ideal buffer are: perfect linearity whatever signal amplitudes; and an instantaneous response output, regardless of the speed of the input signal. Fig. 2: Voltage Follower Voltage Follower must satisfy certain requirements. These are: High input impedance, Low output impedance, High bandwidth, Low power dissipation, Linearity and Unity voltage gain, High current gain and power gain, etc. IV. TOPOLOGIES OF VOLTAGE FOLLOWER Basic Voltage Follower:A. The simple design voltage follower is the basis source follower or source voltage follower. It is a common drain amplifier circuit with a voltage gain of unity. The output the source terminal follows the input applied to the door. Therefore it is called as a source follower. The diagram in circuit is shown in Fig.3. [6] Fig. 3: Basic Voltage Follower It is designed with the ideal source of PMOS and current. We can use current mirror also in place the power source. Source follower can also be designed with the resistance connected between the source and supply. But it does not provide a constant amount of current flowing through the source terminal of the PMOS. This results in non-linearity in the exit and we cannot get a voltage gain of unity always. [2] it also has a high output impedance. Thus, the resistive configuration is not used. We can use PMOS and NMOS as an expense. But the implemented with current mirror gives good results [1]. The most important parameters related to the voltage follower design in any technology are the voltage gain and output impedance. For this circuit, the output impedance and the voltage gain is given by (1) and (2). Ro = (1) Av = (2)
- 3. Analysis of Class-A Voltage Follower (J4R/ Volume 01 / Issue 01 / 003) All rights reserved by www.journalforresearch.org 13 Here, gm indicates the transconductance. The index denotes the transconductance with body effect. The value of output impedance can be reduced by increasing the body effect [1]. But, it reduces the voltage gain. Transconductance and output impedance are inversely bonded to each other. Considering (3) and (4), we can say that to increase transconductance and reduce production impedance, drain current ID must be increased. However, this leads to large ratio W / L This is not acceptable in submicron technologies, since the main objective is to reduce the transistor size. In addition, the power dissipation increases with an increase in the W/L [6]. √ (3) = (4) Flipped Voltage FollowerB. It is essentially a cascade amplifier with negative feedback where the gate terminal of M1 is used as an input terminal and its source as the output terminal. It is characterized by a very low output impedance due shunt feedback provided by M2, high low supply requirement close to a transistor threshold voltage VTH , low static power dissipation and high gain bandwidth. The flipped (inverted) voltage follower name is based on the fact that FVF is applied on the drain side than on the side of the source. Variation of the output current is absorbed by transistor M2 which is current sensing transistor, while the current remains constant M1, because of this source voltage of the gate of M1 is constant and remains low distortion even at high frequency. A practical limitation of the FVF cell is that it gives very small input and output signal swing [15]. Fig. 4: Flipped Voltage Follower It has high input impedance. Because of the low output impedance, there is a large supply capacity [5]. The damping capacity of FVF is limited by the bias current source. For analysis of the FVF output impedance analysis in the open loop gain can be used. There are two MOSFETs are used in the topology. There transconductance are and respectively. The output impedance of FVF can be given by (5). R0 = (5) Minimum supply voltage required for flipped voltage follower is VTH+2VDSAT. The voltage follower output level is reversed decreased VGS-2VDSAT [5]. It limits the output swing in deep submicron technology. This is the main disadvantage of this topology. Table-1 shows the comparison between two voltage followers Table - 1 Comparision of Two Voltage Followers Topology Output Impedance Output Voltage Swing Basic Source Follower VDD-VGS-VDSAT Flipped Voltage Follower VGS-2VDSAT V. CONCLUSION The simplest design is basic source follower. But, it has many limitations for deep-sub micron design. Flipped voltage follower achieves low output impedance. But, it suffers from non-linearity due to feedback path. Basic source follower and flipped voltage follower posses non-linear distortion, Other designs like super source follower, bulk-driven voltage follower, and class- AB based voltage followers have also been designed to overcome non-linearity problem. But, selection of voltage follower is dependent on application and requirements since, all designs have certain advantages and limitations.
- 4. Analysis of Class-A Voltage Follower (J4R/ Volume 01 / Issue 01 / 003) All rights reserved by www.journalforresearch.org 14 REFERENCES [1] Behzad Razavi, “Design of Analog CMOS Integrated Circuits”, McGraw-Hill Publication, pp. 67-76, 2001. [2] P.E.Allen and D.R.Holberg, “CMOS Analog Circuit Design”, Oxford University Press,2002. [3] Carvajal R.G., Ramirez-Angulo J., Lopez-Martin A.J., Torralba A. Galan, J.A.G. Carlosena A. and Chavero F.M., “The Flipped Voltage Follower: A Useful Cell for Low Voltage Low Power Circuit Design”, IEEE circuits and systems, pp. 1276-1291, July 2005. [4] Gaurang P. Banker, Amisha P. Naik and N.M. Devashrayee, “Comparative Analysis of Low Power CMOS Class-A Voltage Followers with Current Mirror as a Load”, International Journal of Electronics and Communication Technology (IJECT), “to appear” in vol.2 Issue. 2, June 2011. [5] Neeraj Yadav, “Low Voltage Analog Circuit Design Based on the Flipped Voltage Follower”, IJECSE, vol. 1, no. 2, pp/ 258-273.ISSN.