Energy efficient construction and trainig practices - 1 Basics
Download as PPTX, PDF0 likes396 views
This document discusses energy-efficient construction practices, focusing on heat transfer, humidity, condensation, and historical changes in building regulations. It provides examples of how insulation improvements can reduce energy consumption and includes calculations for heat transfer through various building elements. The publication emphasizes the importance of proper ventilation, moisture management, and training in construction practices to ensure energy efficiency and structural integrity.
![Year
Building
regulation U-
value[W/Km2
]
Thickness of
insulation
Insulation
layers
U-value of
structure
[W/Km2
]
1976 0.4 100 0.37
1978 0.35 125 0.32
1985 0.28 150 0.27
2003 0.25 175 125 + 50 0.22
2007 0.24 175 125 + 50 0.22
2010 0.17 205 30 + 125 + 50 0.17
2012 0.17 205 30 + 125 + 50 0.17
Examples of wall structures from
different years – mineral wool
insulation](https://image.slidesharecdn.com/energyefficientconstructionandtrainnigpractices-1basics-150505000636-conversion-gate02/85/Energy-efficient-construction-and-trainig-practices-1-Basics-7-320.jpg)
![Condensation point
Question
When can the condensation point be reached inside a structure?
When is the condensation point harmful and when is it not?
Harmful: In winter, to the inner surface of the external leaf of a sandwich element. When the
ventilation works, the condensation is harmless.
Harmless: The under surface of a sheet metal roof when underlay is under the sheet metal.
Temperature [C]
Absolutehumidity[g/m3]
In the picture air humidity
has condensed on the
cold wall.
The curve illustrates the highest amount of
air humidity at different temperatures.](https://image.slidesharecdn.com/energyefficientconstructionandtrainnigpractices-1basics-150505000636-conversion-gate02/85/Energy-efficient-construction-and-trainig-practices-1-Basics-13-320.jpg)
![Mollier diagrams show that:
when outdoor temperature is less than 0 °C, the cube of air consists of max 5 grams of water vapour.
When the temperature inside the building site is 15 °C and RH 80 %, the cube of air consists of 10
grams of water vapour.
when the air exchanges in the site is 10 000 rm3 per hour, the exiting water amount is 50 litres.
The effect of ventilation on site conditions
Diagram of
planning the
building site
ventilation and
temperature :
www.tut.fi/site
0
5
10
15
20
25
30
35
-20 -15 -10 -5 0 5 10 15 20 25 30
Temperature [C ]
o
100 %
80 %
60 %
40 %
20 %
Absolutehumidity[g/m3]](https://image.slidesharecdn.com/energyefficientconstructionandtrainnigpractices-1basics-150505000636-conversion-gate02/85/Energy-efficient-construction-and-trainig-practices-1-Basics-22-320.jpg)
Energy efficient construction and trainig practices - 1 Basics
- 1. Energy Efficient Construction and Training Practices: Basics The sole responsibility for the content of this publication lies with the authors. It does not necessarily reflect the opinion of the European Union. Neither the EASME nor the European Commission are responsible for any use that may be made of the information contained therein.
- 2. Energy and moisture of building site • Introduction • Heat transfer • Humidity and condensation point • Correlation between heat and moisture
- 3. Construction site heating The construction site is heated to: 1) increase the firmness of the concrete 2) dry the structures 3) create good working conditions
- 4. Three ways of heat transfer Convection in air or smoke Radiation for example windows Conduction through the structures Speculation: Why are the floors of old houses often cold?
- 5. Three ways of heat transfer Answer: Warm air rises. If the roof is not tight, the warm air rises to the roof space and the cold air flows into the room from windows and door gaps.
- 6. Thermal transmittance (U-value) represents the capacity of heat insulation of different structural elements. The smaller the U-value, the better the heat insulation. In the 1970s and 1980s huge steps were taken in energy efficiency. Building regulation year -1969 1969- 1976- 1978- 1985- 10/2003- 2008- 2010- 2012- W/(K·m²) Warm rooms Exterior wall 0.81 0.81 0.4 0.35 0.28 0.25 0.24 0.17 0.17 Ground supported floor 0.47 0.47 0.4 0.4 0.36 0.25 0.24 0.16 0.16 Crawlway floor 0.47 0.47 0.4 0.4 0.4 0.2 0.2 0.17 0.17 Base floor adjacent to outdoors 0.35 0.35 0.35 0.29 0.222 0.16 0.16 0.09 0.09 Roof 0.47 0.47 0.35 0.29 0.22 0.16 0.15 0.09 0.09 Door 2.2 2.2 1.4 1.4 1.4 1.4 1.4 1 1.0 Window 2.8 2.8 2.1 2.1 2.1 1.4 1.4 1 1.0
- 7. Year Building regulation U- value[W/Km2 ] Thickness of insulation Insulation layers U-value of structure [W/Km2 ] 1976 0.4 100 0.37 1978 0.35 125 0.32 1985 0.28 150 0.27 2003 0.25 175 125 + 50 0.22 2007 0.24 175 125 + 50 0.22 2010 0.17 205 30 + 125 + 50 0.17 2012 0.17 205 30 + 125 + 50 0.17 Examples of wall structures from different years – mineral wool insulation
- 8. Example • Area 1.0 m x 2.1 m = 2.1 m2 • Temperature difference 36 K • Total heat transfer coefficient = 1 W/Km2 =2.1m2 x 36K x 1W/Km2 x 24h = 1.8kWh How much heat is conducted through the door from 1980s in a day? =2.1m2 x 36K x 1.4W/Km2 x 24h = 2.5 kWh Calculate how much heat is conducted during the day through a one- metre wide door. The inside temperature is 21 oC and outside temperature is -15 oC.
- 9. Example Area 120 m2 The improvement in total heat transfer coefficient 0.15–0.09 = 0.06 W/Km2 The difference of needed heating energy = 120 m2 x 0,06W/Km2 x 3878Cod x 24 h/d= 670118 Wh=670 kWh Saving 0,12 €/kWh x 670 kWh = 80 € What would be the saving if original level was from 1985 (0,22 W / Km2 )? The improvement of total heat transfer coefficient 0.22–0.09 = 0.13 W/Km2 The difference of heating energy needed = 120m2 x 0.3W/Km2 x 3878Cod x 24h/d = 1452 kWh Saving 0.12€/kWh x 1452 kWh = 174 € What about in a 1960s house? Answer: 630 € in a year Calculate: How much money can be saved in a year by insulating 120 m2 of the roof from the building regulation level of 2008 to the present level? • Heating degree day value in Helsinki is 3878 Cod. • The price of energy is 0.12 €/kWh.
- 10. I II III IV V VI VII VIII IX X XI XII Year Maarianha mina 592 567 551 406 216 34 3 17 135 308 432 542 3803 Vantaa 682 640 586 376 146 16 2 21 158 348 497 625 4097 Helsinki 647 612 566 383 153 11 1 12 125 316 464 588 3878 Pori 677 633 585 389 181 26 3 25 171 352 497 622 4161 Turku 663 625 575 377 161 19 2 18 149 338 486 608 4021 Tampere 724 675 612 400 176 28 5 34 192 382 529 667 4424 Lahti 726 677 610 395 159 20 4 31 191 383 528 668 4392 Lappeenra nta 759 699 621 403 165 22 5 28 184 386 546 692 4510 Jyväskylä 785 721 646 440 206 40 10 56 227 414 569 718 4832 Vaasa 719 666 619 424 214 29 5 35 192 377 526 663 4469 Kuopio 812 741 653 445 198 31 7 38 194 400 571 735 4825 Joensuu 826 753 665 456 216 39 10 47 215 416 589 752 4984 Kajaani 864 777 695 479 251 57 17 75 245 441 618 785 5304 Oulu 824 742 677 465 249 47 9 55 224 423 593 749 5057 Sodankylä 946 838 760 548 345 106 49 136 316 523 722 891 6180 Ivalo 923 819 755 557 377 146 69 147 318 523 722 875 6231 Heating degree days 1981-2010
- 11. Air humidity and condensation point Example: • In December the temperature is -20 oC outside. • The roof work is slightly behind schedule. • The roof insulation is not installed. • The heating has been just turned on. The floor slab is still cold. Air reaches condensation point.
- 12. Basic terms • Absolute humidity is the total amount of water vapour present in a cubic metre of air. • The maximum limit of absolute humidity is saturated humidity. It defines how much water vapour the air can contain at a certain temperature. Hot air can contain more water vapour than cold air. • The condensation point (condensation point temperature) is the temperature at which saturated humidity is reached. • Relative humidity defines what percentage of the saturated humidity of the current temperature is absolute humidity.
- 13. Condensation point Question When can the condensation point be reached inside a structure? When is the condensation point harmful and when is it not? Harmful: In winter, to the inner surface of the external leaf of a sandwich element. When the ventilation works, the condensation is harmless. Harmless: The under surface of a sheet metal roof when underlay is under the sheet metal. Temperature [C] Absolutehumidity[g/m3] In the picture air humidity has condensed on the cold wall. The curve illustrates the highest amount of air humidity at different temperatures.
- 14. Drying • Water evaporation binds energy. • About 10% of site energy consumed in concrete work goes to the evaporation of water. • Evaporated water is transferred to outdoor air through ventilation. Heating the ventilation accounts for half the total energy consumption. • Concrete needs to dry several weeks before it is possible to start coating work. • Drying must be slow in the early stage in order to avoid season cracks. • The plastic shield on the concreting and curing slow down the drying proper. • Proper drying significantly affects the energy consumption and ensures the quality and the schedule of construction.
- 15. Example • While making concrete, about 180 litres of water is used per cube of concrete. • 60-70 litres of water combine with concrete. At balance level, concrete contains 30-40 litres of water. • There are 70-90 litres of water to be evaporated. • Evaporated water amounts to 70-90 litres. 600 litres How much water evaporates from a slab 80 mm thick and 100 m2 wide?
- 16. Question How much energy is consumed by water evaporating from a concrete cube? • Evaporated water = 80 litres • The heat of evaporation = = 2260 kJ/kg 80 kg x 2260 kJ/kg = 180800 kJ =180.8 MJ = 50 kWh (0.12 € /kWh x 50 kWh = 6 €)
- 17. Moisture movement in a building element without a vapour barrier + -
- 18. Moisture movement in a building element with installed vapour barrier + -
- 19. Moisture proofing Question: • How is the vapour barrier installed in the corners of a building? • Draw a horizontal section of the corner.+- Vapour barrier
- 20. Construction moisture can be released by seepage, by evaporation or, in the worst case, by mechanical drying. For example, freezing water in the insulation of a sandwich element can ruin the building materials when it melts. The structures must be designed in a way that they dry by ventilation. The structures should stay dry during installation work. The ventilation systems of a structure must be made properly.
- 22. Mollier diagrams show that: when outdoor temperature is less than 0 °C, the cube of air consists of max 5 grams of water vapour. When the temperature inside the building site is 15 °C and RH 80 %, the cube of air consists of 10 grams of water vapour. when the air exchanges in the site is 10 000 rm3 per hour, the exiting water amount is 50 litres. The effect of ventilation on site conditions Diagram of planning the building site ventilation and temperature : www.tut.fi/site 0 5 10 15 20 25 30 35 -20 -15 -10 -5 0 5 10 15 20 25 30 Temperature [C ] o 100 % 80 % 60 % 40 % 20 % Absolutehumidity[g/m3]
- 23. Raising the temperature of concrete by 10 degrees almost always halves the drying time regardless of the drying circumstances By using heating cables and an infra dryer the heat is focused where it is specially needed.
- 24. An inch is enough for ventilation Don’t heat us!
- 25. 09/07/2015 Working order of crawling space! • How the wind shield board (5) should be installed to the Soffit? • The shielding board must be resistant to water. • Notice that the shielding board must cover all timber structures. • The floor and junctions must be made airtight.
- 26. • A breathable construction does not mean air movement; it is about the ability of materials to absorb and release vapour. • According to current thinking, the construction needs to be airtight and good indoor air is achieved by ventilation. • Who wants to breath the air flowing through old structures? Discuss in pairs: Air-tight construction or breathable construction?
- 27. Do you know that burning 33 kg of gasoline produces over 53 kg water vapour! 10 L 3 L 10 L10 L10 L 10 L
- 28. The good practices and principles required for the energy efficient building have been included in the teaching material. The writers are not responsible for their suitability to individual building projects as such. The individual building projects have to be made according to the building design of the targets in question.