Basic guide of sap

SAP 4.6 Basic Skills
Self-Study
Edition 2.00

Doc#: S-010328-BAS-TT-2.00

Copyright 2001 © Massachusetts Institute of Technology

NOTE: SAP 4.6 Basic Skills Self-Study Errata Sheet

Page Step Correction
3-11 4 You may double-click on the text if you are not successful clicking on the
transaction cube.

3-18 4 Enter the following information:

Name: *wish* (include the asterisks *)

6-7 Pre 1 If you still have the Purchasing Overview by Cost Collector report open
proceed to Step 4. (Not Step 5.)

Table of Contents

Explains the purpose of the Self-Study,
Introduction prerequisites, and guidelines for use.
Page iii

Lesson 1: Introduces frequently used SAP terminology. Page 1-1
SAP Terminology

Lesson 2: Walks you through the SAP logon process for
Page 2-1
Logging In Macintosh and Windows.

Describes the basic SAP screen, explains
Lesson 3:
moving between menus, matchcode searches, Page 3-1
Basic SAP Navigation and other commonly used functions.

Lesson 4: Teaches how to define various search criteria
Page 4-1
Reporting Fundamentals necessary for report generation.

Lesson 5: Covers the basic printing functions available in
Page 5-1
Basic Report Printing SAP.

Lesson 6: (optional) Describes how to download an SAP report to a
Downloading SAP spreadsheet using either the SAP download Page 6-1
Reports button or menu path.

Shows how to set SAP system defaults, i.e.,
Lesson 7:
printer name, date format, telephone and Page 7-1
User Default Settings address.

Lesson 8: (optional) Shows how to customize some SAP screens on
Page 8-1
End User Customization Macintosh and Windows platforms.

Lesson 9: Walks you through the SAP logoff process for
Page 9-1
Log Off SAP Macintosh and Windows.

Doc#: S-010328-BAS-TT-2.00 i

ii Doc#: S-010328-BAS-TT-2.00

INTRODUCTION
SAP stands for System Applications and Products. It is the name of both the online financial and
administrative software and the company that developed it. SAP is made up of individual
modules that perform various organizational system tasks. MIT has customized and
implemented the SAP modules that best suit its organizational needs.

This self-study is designed for MIT employees new to SAP, and it is a prerequisite for all other
SAP training.

PREREQUISITES
Before you begin this self-study, you must have the following:

✔ Kerberos user ID. A Kerberos user ID identifies you to the MIT electronic security
system. You will use your Kerberos user ID and password for multiple purposes,
besides SAP.

✔ SAP user profile. An SAP user profile is established to identify the authenticity of the
individual logging on to SAP and to specify the functions that the user is allowed to
perform.

✔ Access to both the sap-edu “practice” environment and the SAP Production “live”
environment. (The practice environment has the same functions and transactions as
the Production environment but has specific data for practice exercises).

! Step # 1 is to obtain a Kerberos user ID, and step # 2 is to contact your Authorized
Requester (see next page) to obtain an SAP user profile.

If you do not have all of the above Prerequisites, or if you are not sure whether you have them,
please contact the Primary Authorizer in your department, lab or center. To find the name of your
Primary Authorizer, refer to the SAP for MIT web site at http://web.mit.edu/sapr3/

Doc#: S-010328-BAS-TT-2.00 iii

iv Doc#: S-010328-BAS-TT-2.00

How to Use This Self-Study

The SAP Basic Skills self-study is MIT-specific and is designed for new SAP users. The self-
study is divided into lessons, and you are encouraged to complete the lessons in the order
presented so that you may thoroughly understand the material in each lesson before attempting
to complete the next in the series. In some cases a lesson will include separate instructions for
Macintosh and PC users (eg. log in, log out) where the steps are different for the two platforms.
If there is a platform designation indicated, please be sure to follow the steps for the platform you
are using to complete the self-study.

OBJECTIVES
After completing this SAP Basic Skills self-study, you will be able to:

✔ Understand basic SAP and MIT terminology

✔ Log on and off SAP

✔ Navigate within SAP

✔ Enter selection criteria necessary to generate reports

✔ Print and download SAP reports

✔ Tailor your SAP user settings

LESSONS
This Self-Study is divided into nine Lessons, each focusing on a particular skill or function.
These lessons allow you to learn and practice some of the basic skills used throughout SAP, and
each lesson includes:

• Overview and Objectives: the purpose and goals of each lesson

! Getting Started: descriptive background material needed before a participant
can begin the hands-on portion of the lesson

✎ Practice: step-by-step exercises designed to familiarize the participant with the
given function in SAP

✔ Self-Check: optional exercises designed to reinforce learning

! Notes: blank pages for participants’ notes on the given Lesson

Doc#: S-010328-BAS-TT-2.00 v

As you continue to work on your own with the SAP system, you will discover that SAP offers
many ways of completing standard tasks. This great flexibility allows each user to develop his or
her own preferences for using navigation options and system shortcuts.

GETTING HELP
If you have difficulty completing this self-study at your desk:

✔ Attend an SAP Basic Skills lab course with an instructor present

✔ Contact the Business Liaison Team at business-help@mit.edu or 252-1177

✔ Contact your school or area Business Consultant

SAP Documentation, Training, and News Updates can be found on the web. Go
to http://web.mit.edu/sapr3/. Your Gateway to SAP Resources at MIT.

vi Doc#: S-010328-BAS-TT-2.00

Lesson 1:

SAP TERMINOLOGY
SAP terminology along with classic financial terminology is used for business at MIT. The
terminology presented in this lesson is used frequently both in this self-study and in financial
communications at MIT.

OBJECTIVES
In this lesson you will become familiar with basic SAP terminology. At the completion of this
lesson you will be able to:
✔ Recognize some with system-specific language
✔ Differentiate between a Cost Center,
Internal Order and WBS Element
✔ Distinguish between Master and Transactional data.

! Note: SAP financial terminology is based on general accounting functions. If you
do not have an accounting background, it is recommended that you attend the
Accounting Fundamentals course prior to taking Basic Skills.

SUMMARY OF BUSINESS RULES

✔ None

Doc#: S-010328-BAS-TT-2.00 1-1

1-2 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

Below is some SAP terminology that will be used throughout this training. Additional
terminology may be introduced in subsequent lessons as needed.

Environment: A completely self-contained version of the SAP database,
designated for a specific purpose. A Production environment
contains live, real-time data while a non-production environment
such as the practice environment holds valid, but not real-time
data, and is be used for learning examples. Separate
environments do not exchange information. If you enter data
into one environment, you will not be able to see that information
in another environment

GUI: Graphical User Interface. The SAPgui is the software on your
computer or local server that allows you to connect to one or
more of the SAP environments.

Master Data: Master data is a collection of information about a person or an
object, e.g. a cost object, vendor, or G/L account. For example,
a vendor master record contains not only general information
such as the vendor’s name and address, but also specific
information, such as payment terms and delivery instructions.
Generally for endusers, master data is reference data that you
will look up and use, but not create or change.

Material Group: Material Groups are codes that classify goods and services by
commodity or service type and are used by the Procurement
Office for reporting purposes. For example, desks belong to the
material group 1920 Furniture and Furnishings.

User Profile: The collection of authorizations a user or set of users has been
granted in order to perform transactions related to their jobs. For
example, someone designated as a requisitioner might only
have the ability to create and change, but not approve,
requisitions.

Transactional Data: Transactional data is data related to a single business event
such as a purchase requisition or a request for payment. When
you create a requisition, for example, SAP creates an electronic
document for that particular transaction. SAP gives the
transaction a document number and adds the document to the
transaction data that is already in the system. Whenever you
complete a transaction in SAP, that is, when you create,
change, or print a document in SAP, this document number
appears at the bottom of the screen.

Doc#: S-010328-BAS-TT-2.00 1-3

Transaction Code: A unique command that tells the location of a system task. A
transaction code may contain letters only or a combination of
letters and numbers. For example, the transaction code for
Display Purchase Requisition is ME53.

Workflow: A routing tool in SAP that forwards documents for review or
approval. For example, a requisition that needs to be approved
is sent to the appropriate approver's inbox. Workflow is also used
to route journal vouchers, credit card charges, and other
documents in SAP.

Cost Object: A Cost Object collects expenses and revenues for a particular
purpose, such as a research project. In SAP there are three
types of cost objects: Cost Center, Internal Order, and WBS
(Work Breakdown Structure) Element (see below for definition).

Cost Center: General or operating Cost Objects are known in SAP as Cost
Centers. Cost Centers are budgeted on the fiscal year.

Internal Order: A non-sponsored Cost Object (for example, funding from the MIT
Provost) used to track costs over periods other than fiscal years.
Internal Orders are often created to track gifts or endowments at
MIT.

WBS Element: WBS Elements are funded by outside sponsors and are used to
track costs of a particular research project over the entire span of
its activity. They may also be created to track other sponsored
activities, such as gifts.

G/L Account: G/L accounts are also called Cost Elements in SAP. They are a
classification by expense or revenue type. In the CO (Controlling)
module of SAP, the term Cost Element is used. In the FI
(Financial) module, the term G/L Account is used. These terms
are used interchangeably for reporting, requisitions, and journal
vouchers.

For a more detailed glossary of financial terminology used at MIT see the
Glossary at http://web.mit.edu/sapr3/docs/.

1-4 Doc#: S-010328-BAS-TT-2.00

✔SELF-CHECK
Answer the following questions using the information on the preceding pages for reference.
The correct answers may be found on the next page.

Questions

1. Explain the difference between Master data and Transactional
data:

2. What does GUI stand for?

3. Which of the following terms refers to a classification by expense
and revenue type?

a) Cost Object

b) G/L account

c) Material group

4. List the three types of Cost Objects:

Doc#: S-010328-BAS-TT-2.00 1-5

Answers to Self Check

1. Master data - is a collection of data (information) about a
person or an object. Transactional data - is data (information)
that is related to a single business event.

2. Graphical User Interface

3. c. G/L Account

4. Cost Center, WBS Element, Internal Order

1-6 Doc#: S-010328-BAS-TT-2.00

!NOTES:

Doc#: S-010328-BAS-TT-2.00 1-7

1-8 Doc#: S-010328-BAS-TT-2.00

Lesson 2:

LOGGING IN
For this self-study, new users should log into the SAP Practice (sap-edu) environment. The
Practice environment allows you to learn and practice the skills used throughout SAP without
affecting the live Production environment.

OBJECTIVES
In this lesson you will become familiar with the basic SAP Log On procedure, as well as SAP
security terminology. At the completion of this lesson you will be able to:
✔ Log on to SAP from your desktop computer
✔ Understand SAP and MIT security terminology
✔ Understand SAP Authorizations
✔ Identify your Authorized Requester

✔ SAP contains confidential MIT data, therefore new users are authorized (given
access to transactions) based on their job responsibility.
✔ Kerberos user IDs and passwords should not be shared.
✔ The Authorized Requester for each department, lab and center requests SAP user
profiles for new users.
✔ The SAP Production system logs you off after two hours of inactivity. However, the
Practice system (sap-edu) does not use this time-out security feature.

Doc#: S-010328-BAS-TT-2.00 2-1

2-2 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

SAP Authorization
An SAP authorization is the electronic permission for a person to perform certain SAP
functions. Authorizations consist of three parts:
✔ Person (needs a Kerberos ID)
✔ Function (e.g. reporting, requisitioning, approving requisitions)
✔ Qualifier (where can the person perform this function, e.g. profit center, fund center,
cost object)
For example: Jason Strums (person) can create requisitions (function) for cost object
1234500 (qualifier).

Authorized Requester
An Authorized Requester is a person designated in each department, lab, or center (DLC) to
be responsible for updating the Roles database or informing SAP User Accounts of any
authorization changes needed in the Production environments for SAP users. These
changes include:
✔ Requesting access for new SAP users
✔ Revising an existing user's authorizations
✔ Deactivating a user's SAP access

Roles Database
The Roles database is an MIT built application that allows departments to enter
authorization information for multiple systems (SAP, NIMBUS, etc.) in a single place. The
information entered into Roles by the Authorized Requester is fed to these other systems on
a regular schedule.
Authorizations that are created or changed via the Roles database are automatically
updated in both the Production and Practice environments on a nightly basis. For
departments with specialized authorizations that must go through SAP user accounts, an
update to the Practice environment must be specially requested at the same time the
Production authorization request is made. (See more on Environments in the next section.)

! Your first step is to obtain a Kerberos user ID, after which you need to obtain an SAP
user account. New SAP users should be given access to SAP (SAP user profile) by the
Authorized Requester in their department, lab or center. If you do not have a Kerberos
user ID or an SAP user profile, please contact your Authorized Requester (Primary
Authorizor). http://web.mit.edu/sapr3/

Doc#: S-010328-BAS-TT-2.00 2-3

SAP Environment
An SAP environment is a completely self-contained version of the SAP database,
designated for a specific purpose. As an SAP end-user, you will be working in the
Production environment to perform your departmental business transactions, and the
Practice environment for training purposes.

Production
The Production environment is where actual financial transactions take place and contains
the "data of record" for MIT. The Production environment runs on several application
servers: Production-1, Production-2 and Production-3.
The three production servers are identical and share data and tables. Using multiple servers
keeps the system from getting overloaded.
✔ If the name of your school or non-academic department begins with A-L, choose
Production 1
✔ If the name of your school or non-academic department begins with M-Z, choose
Production 2
✔ Production-3 has been reserved for future expansion, and Production-Batch is used
only for running batch jobs such as JV uploads or long reports

Practice Environment: sap-edu

The Practice environment has the same functions and transactions as the Production
environment, but also contains specially created data to support practice exercises.

✔ Your authorizations in sap-edu match Production following a 24-hour delay, as long
as your department uses the roles database.

✔ The data that is found in sap-edu is not up to date with Production. The data in sap-
edu consists of a periodic “snapshot” of the Production system, and it may be several
months old.

✔ The work that is done in the Practice environment (sap-edu) will not affect the
Production environment.

! The Practice environment (sap-edu) is the environment that we will be using for this
self-study. You will log into the Production environment after completing training in
order to perform "real" transactions in SAP.

2-4 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Logging On to the SAP Practice Environment (Macintosh)
In this exercise you will practice logging into the SAP Practice environment. If you have not
already launched a Kerberos ticket you will have to first get a Kerberos ticket before you log
into SAP. For example, if you checked your email, you already have a Kerberos ticket. If
you double-click on the SAPgui icon on your desktop and you do not have an active
Kerberos ticket, you will be prompted to enter your username and password before SAP will
log you in.

SAPgui Icon 1. Double-click on the SAPgui icon on your computer desktop.

The SAP Launch pad will appear on your screen. The Launch
Pad is used to connect you to a specific SAP environment.

2. In the SAP Launch pad double click on sap-edu.

Get a Kerberos 3. The “MIT Kerberos for Macintosh” screen will pop up. Enter
ticket the following information in the Kerberos Authentication
pop up box:
Name: your username
Password: your password

! If you have already launched a Kerberos ticket, for
example to read your Eudora email, this box will not
appear and the SAPgui will simply launch.

Doc#: S-010328-BAS-TT-2.00 2-5

4. Click the OK button.

! This will both establish your Kerberos ticket and launch
SAP.

Starting SAP When you have finished practicing and are ready to perform
real transactions in SAP use the SAP Launch Pad to log into
one of the Production environments instead of sap-edu.

2-6 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Logging On to the SAP Practice Environment (Windows)
In this exercise you will practice logging into the SAP Practice environment. If you have not
already launched a Kerberos ticket you will have to first get a Kerberos ticket before you log
into SAP. For example, if you checked your email, you already have a Kerberos ticket. If a
Kerberos ticket already exists you can double-click on the SAPgui icon on your desktop or
select it from the program menu and log into SAP.

Get a Kerberos 1. Follow the Menu Path:
Ticket
Start>>Programs>>SAP Frontend>>Leash32 Shortcut

! If you have checked your email in Eudora, you already
have a Kerberos ticket.

2. The Kerberos “Leash” screen pops up.

Doc#: S-010328-BAS-TT-2.00 2-7

3. Click on the Renew Ticket(s) button .

4. Enter your username and click OK.

5. Enter your password and click OK.

6. Minimize the Leash32 window by clicking the Minimize
button in the upper right corner of the window.

Starting SAP 7. Follow the Menu path:
Start>>Programs>>SAP Frontend>>sap-edu

When you have finished practicing and are ready to perform
real transactions in SAP use the SAP Launch Pad to log into
one of the Production environments instead of sap-edu.

2-8 Doc#: S-010328-BAS-TT-2.00

✔SELF-CHECK
Answer the following questions using the information on the preceding pages for reference.
The correct answers may be found on the next page.

Questions

1. Who is responsible for a Department, Lab or Center’s
authorizations in SAP?

2. True or False: If you create a document in the Practice
environment (sap-edu) it will automatically be created in the
Production environment.

3. An active is required
before a user can log in to SAP. This is a security feature.

Doc#: S-010328-BAS-TT-2.00 2-9


1. The Authorized Requester

2. False, activity performed in one environment does not affect any
other.

3. Kerberos Ticket

2-10 Doc#: S-010328-BAS-TT-2.00

! NOTES:

Doc#: S-010328-BAS-TT-2.00 2-11

2-12 Doc#: S-010328-BAS-TT-2.00

Lesson 3:

BASIC SAP NAVIGATION
This lesson introduces you to basic SAP navigation, including the basic screens, menus,
transaction codes and icons that you will use frequently. The first step to learning SAP is to
become familiar with SAP navigation. Understanding the skills presented in this lesson is necessary
prior to completing other lessons in this self-study course

OBJECTIVES
In this lesson you will become familiar with the basics of SAP navigation. At the completion of this
lesson you will be able to:
✔ Recognize typical SAP screen features
✔ Understand how to use the Navigation Area
✔ Navigate between the “SAP Standard” main menu and the
MIT custom ”User menu"
✔ Use the Matchcode search function
✔ Open a second session in SAP
✔ Use transaction codes

✔ None

! As you continue to work on your own with the SAP system, you will discover that it offers
many ways of completing standard tasks. This great flexibility allows each user to develop his
or her own preferences for using navigation options and system shortcuts.

Doc#: S-010328-BAS-TT-2.00 3-1

3-2 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

SAP Screen Features
A typical SAP screen has seven main areas: Screen Header, Menu Bar, Standard Toolbar, Title
Bar, either a Navigation Toolbar or Application Toolbar, Screen Body, and Status Bar. There are
some cosmetic differences between the SAP screens on a Macintosh and on a PC, but the
menus and most of the buttons are the same.

(1) Screen Header

(2) Menu Bar

(3) Standard Toolbar

(4) Title Bar

(5a) Navigation Toolbar

(6) Screen Body

(7) Status Bar

Figure 1
(1) Screen Header
On a Macintosh, the Screen Header displays the name of the current system, session, and client
(environment) you are working in. On a PC it displays standard Window buttons such as minimize,
maximize, and close.

(2) Menu Bar
The Menu Bar contains menus for the functional and administrative areas of the system. As you
navigate through SAP screens, the options on the menu bar will change, but every menu bar will
contain System and Help. Clicking on the System option on the menu bar opens a drop down
menu of useful functions such as Create session, End session and Log off.

Doc#: S-010328-BAS-TT-2.00 3-3

(3) Standard Toolbar
The Standard Toolbar contains the Command field and the standard SAP Toolbar buttons.

Command Field
The Command field is used to enter transaction codes that take you directly to a system task
without using menus. Sometimes the Command field is closed by default. To open it, click the
arrow to the left of the Save button. To use it, type the transaction code in the blank field to the
left and press Enter.

Closed Command Field:

Open Command Field:

Standard Toolbar Buttons
The SAP buttons displayed on the Toolbar provide quick access to commonly used SAP
functions. The table below describes the standard toolbar buttons. A list of other frequently used
buttons and functions can be found at <http://web.mit.edu/sapr3/docs/webdocs>

! If a Toolbar button is gray, it is not available for use on that particular screen.

Standard Toolbar Buttons
Keyboard Keyboard
Shortcut Description Button Shortcut Description Keyboard
Button Button Shortcut Description
Enter key Enter/Continue Ctrl P Print Page Down Next page

Ctrl S Save to database Ctrl F Find Ctrl Page Last page
Down
F3 Back Ctrl G Continue F1 Help
Search
(Mac only)

Shift F3 Exit system Ctrl Page First page None Create new
task Up (PC only) session

F12 Cancel Page Previous Alt 12 Customize
Up page local layout
(PC only)

Keyboard Shortcuts
Instead of an SAP button, you can sometimes use a keyboard shortcut. Keyboard shortcuts allow
the use of a key or combination of keys to perform the same function as a button. On a PC, the
button name and keyboard shortcut are displayed when you place the mouse over the button.
The Mac does not display keyboard shortcuts, but the keys function the same as on a PC. See
the SAP for MIT web documentation Getting Started: SAP Buttons for a list of the most frequently
used SAP buttons and their shortcuts <http://web.mit.edu/sapr3/docs/webdocs>.

3-4 Doc#: S-010328-BAS-TT-2.00

(4) Title Bar
The Title Bar displays the name of the screen you are working in.

(5a) Navigation Toolbar
The Navigation Toolbar contains the SAP Standard Menu, SAP User Menu buttons and
Favorites.

(5b) Application Toolbar

(6) Screen Body

Figure 2

(5b) Application Toolbar
The Application Toolbar is located directly below the screen title, in the place of the Navigation
Toolbar. It contains buttons that duplicate functions available from the menu bar but provide
quicker access to some of the most commonly used functions for the current screen and system
task. For instance, the Execute button is often available in the first position of the Application
Toolbar. For information on other frequently used function buttons see the SAP for MIT web
documentation Getting Started: SAP Buttons <http://web.mit.edu/sapr3/docs/webdocs>.

Doc#: S-010328-BAS-TT-2.00 3-5

(6) Screen Body
In SAP, the Screen Body will display different elements depending on where you are in the
system. On the SAP User Menu and the SAP Standard Menu screens, the screen body contains
the navigation area and the non-active work area. In the SAP Inbox, both the navigation area
and the work area are active. In an SAP transaction screen, the screen body contains only the
work area and has entry fields in which you can enter, change, or display information to
accomplish your system task.
SAP has three field types: Required, Default, and Optional
1. Required Entry fields are usually flagged with a question mark. You must enter data in
Required Entry fields in order to proceed with a system task.
2. Default Entry fields already have a system entry. However, you may be able to overwrite
the system entry depending on the system task and / or your SAP profile.
3. Optional Entry fields are those in which you may enter data, but an entry is not required
by the system in order to proceed with a system task. Some Optional Entry fields may
become required depending on the values entered in other fields.

! Some fields that are optional in SAP are required by MIT's business rules. SAP does not
enforce MIT business rules in every case, but you will be expected to learn the MIT business
rules for transactions you will enter in SAP.

(7) Status Bar
The Status Bar, located at the bottom of the SAP screen, displays system messages and other
session information.

Figure 3

System Messages
The large field to the left displays system messages including document numbers, error messages
or instructions, such as “Make an entry in all required fields.” It is important to check the status bar
if you need to record your document numbers for further processing.
Double-click on the message or click the red circle and a dialogue box pops up that explains the
message and what action to take.

3-6 Doc#: S-010328-BAS-TT-2.00

System Information
The second field on the status bar defaults to display the system information such as system
name (session number), and (client number). In the example above, the system is SF6, the
session number is (1) and the client number is (030).
You can open or close the second, third, and fourth fields. Click the arrow to the left of the
system name. To redisplay the information, click the arrow in the right corner of the Status Bar.
To change the information displayed in this area, click the Selection List button to the right of the
client number and select from the list that pops up:

On a Macintosh: System On a PC: System
Client Client
User User
Response Program
Transaction Transaction
Response Time Response Time
Round Trip/Flushes

Doc#: S-010328-BAS-TT-2.00 3-7

3-8 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

The SAP Standard and SAP User Menus

The Navigation Area is made up of folders and subfolders navigating to Transaction Cubes,
which access transactions. To access those folders and subfolders, you use dropdown
arrows, as will be described in the following exercise. Most departmental users at MIT will see
only the Role ZMIT folder on their User menu. However, some may see additional or different
“Roles”, especially those users who perform central financial functions.
There are two main menus you will encounter in SAP: the "SAP User menu" screen and the
"SAP Standard menu" screen. When you log onto SAP, you will see one of these two menus,
depending on how your SAP user profile is set up.
The “SAP User menu” screen is a custom menu designed to help MIT departmental users
navigate easily through SAP functions. It is sometimes called the ZMIT screen and will allow
you to accomplish most of your day-to-day functions without having to find your way through
the full SAP R/3 menu.

The SAP custom User menu screen

Figure 4

The SAP Standard menu, which is delivered with
the SAP system.

Figure 5

Doc#: S-010328-BAS-TT-2.00 3-9

3-10 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Use the Navigation Area
The area of the screen where the menu folders and Favorites folder are located is called the
Navigation Area. You can open and close the folders there by clicking on the arrows to the left of
each folder.

Navigation Access the SAP User menu screen, if you are not already there.

1. To open the Role ZMIT folder, click on the dropdown arrow
to the left of the Role ZMIT folder .

The dropdown arrow will reorient and the Role ZMIT
subfolders will be displayed.

2. Click on the dropdown arrow to the left of the Purchasing
folder .

3. Click on the dropdown arrow to the left of the
Requisitioning folder. A list of transactions will be displayed.

4. Double-click on the Transaction cube next to Display a
Requisition to open the transaction. The initial screen will be
displayed.

5. For this exercise, just navigate back to the User menu using

the yellow Exit arrow on the standard toolbar.

6. Click on the dropdown arrow next to the Requisitions
folder to collapse it.

Doc#: S-010328-BAS-TT-2.00 3-11

3-12 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Navigate Between SAP Menus
In this exercise you will practice moving between the SAP User menu and the SAP
Standard menu. MIT has built the custom User menu in order to provide a shortcut to frequently
used transactions, however you may need certain transactions that are not attached to the MIT
custom User menu in order to perform your job.

Navigate between 1. To go to the SAP Standard menu screen from the SAP User
main menus
menu screen, click on the SAP menu button on the
Navigation toolbar.

2. To navigate to the SAP User menu screen from the SAP

Standard Menu screen, click on the User menu button on
the Navigation toolbar.

! The menu you are in when you log out is where you will start
on log in.

Doc#: S-010328-BAS-TT-2.00 3-13

3-14 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED
Use Matchcode Search
In many cases, SAP requires the entry of a numerical code to indicate a chosen value, like a
vendor number to indicate the particular vendor from whom you wish to purchase. Because SAP
users cannot remember all of these thousands of numerical values, SAP offers a variety of search
functions to assist users in finding the values they need.
For most data fields, SAP provides a Matchcode, or search, feature. The Matchcode function
allows you to select from a list of possible entries for a field if the list is short enough, or if the
available list is too numerous to display, to search for information in a variety of ways.

If a field has a Matchcode option, you will see an ( on a Mac) at the right side of the field
when you click on it. Depending on how many entry options exist for that field, the system
displays one of the following:
✔ A simple list of possible entries, e.g., a list of Material groups (Figure 1)
✔ A graphical selection tool, e.g., a calendar to select a date
✔ A “Search help selection” window (Figure 2)

Figure 6

Doc#: S-010328-BAS-TT-2.00 3-15

Figure 7

Wildcard Search
The Wildcard search format is used in Matchcode search fields. The wildcards or (*)’s are placed
on either side of the search term in order to search for partial data in SAP. For example, if you
remember that there is a G/L Account for meetings but you are not sure of the full name, you can
use (*meet*) to search for that G/L Account. SAP will give you a list of all G/L Accounts with the
word meet in them.

3-16 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE

The following exercise demonstrates the use of the ”Search help selection” window.


1. From the SAP User Menu screen, follow the navigation path:
User Menu
"
Role ZMIT
"
Master Data
"
Purchasing Data
"
Display a Vendor (double-click)

The Display Vendor: Initial Screen is displayed.

2. Click on the Matchcode button ( on a Mac) to the right
of the Vendor field

The Restrict Value Range dialog box appears.

Restrict Value Restricting value ranges allows you to define your search better by
Range Searches limiting your search.

3. Click on the Tab List button in the upper right corner of the
dialog box:

Select E: Vendors: Purchasing

Doc#: S-010328-BAS-TT-2.00 3-17

Selection Criteria 4. Enter the following information:
Screen
Name: *wish*

5. Click the Enter button .

! On the Hit List, Deathwish is listed twice because that
vendor is used by both Procurement and Subcontracts (note
that the vendor number is the same).

You see the double entry because this particular selection
option displays vendors according to the Purchasing
organization.

6. Double-click on the first item on the list. You will return to the
previous screen with the vendor number entered in the field.

3-18 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE

The following exercise demonstrates restricting value ranges.

Navigation Access the SAP User menu screen, if you are not already there. Or, if
you are continuing from the previous Practice, skip directly to Step 3.

1. From the SAP User menu screen, follow the navigation path:
User Menu
"
Role ZMIT
"
Master Data
"
Purchasing Data
"
Display a Vendor (double-click)

2. Click on the Vendor field.

3. Click on the Matchcode button ( on a Mac).
The Restrict Value Range dialog box appears.

4. Click on the Tab List button in the upper right corner of the
dialog box:
This time select A: Vendors (General)

Selection In this scenario, you remember that the name of your vendor begins with
Options two Zs.

5. Click in the Name field.

6. Click on the Selection Options button

Doc#: S-010328-BAS-TT-2.00 3-19

7. Select the Greater than or Equal to button

8. Click the Enter button

9. Click on the Name field and type: ZZ

10. Click the Enter button and SAP returns a list of all vendors with
names beginning with ZZ.

11. Click the Exit button to return to Display Vendor: Initial Screen.

Multiple In this scenario, you remember that the vendor number you are looking
Selection for begins with four 1s.
Options

12. Click on the Matchcode button next to the Vendor field.

13. At the A: Vendors (General) screen, click in the Vendor field.

14. Click on the Multiple Selection button to set the value
ranges.

15. Click on the Ranges tab with the green button.

! Using the Ranges tab with the green button includes the range of
values selected. The Ranges tab with the red button is used to
exclude values in a range. This is explained in greater detail in
lesson 4.

16. Enter 111100 to 111199 in the two boxes on the top line.

3-20 Doc#: S-010328-BAS-TT-2.00

17. Click on the Copy button

We cannot display this here in black & white, but when you return to
the Restrict Value Range dialog box, you will know you have an

active “multiple selection” because the bar on the button
turns green.

18. Click the Enter button . The Hit List dialog box appears.

! The vendor listing includes all those with Vendor Numbers that
begin with four 1s.

Sort the list 19. Double-click on any vendor to select it. You will return to the
previous screen with the new vendor number entered in the field.

20. Click the Yellow Arrow button to return to the SAP User menu.

Doc#: S-010328-BAS-TT-2.00 3-21

3-22 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

Working With Multiple Sessions:
In SAP it is possible to have two or more windows or sessions open at one time. This feature
is useful in many situations, for example: If you want to have a report active in each window
so you could compare or If you want to copy information from a previously posted journal
voucher into a JV you are creating.

Although it is possible to have up to six sessions running at a time, as a general rule, please
only have two sessions open at any one time to minimize the impact on system resources.
When you are finished with the second session and no longer need it, follow the menu path
System>>End Session from that session to close it.

Figure 8
Example of several open sessions on a Mac

Doc#: S-010328-BAS-TT-2.00 3-23

3-24 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Open and Close a Second Session

In this exercise you will create a second session within SAP.

Open a second A second session may be opened from any screen in SAP.
session.

1. From the menu bar at the top of the screen, follow the menu
path:

System>>Create session

Result: A second session opens (it may take a moment).
The additional session will open to the SAP custom User Menu.

Example of two open sessions on a PC.

! In the Windows environment you can switch between
sessions by clicking on the appropriate box on the Windows
Task Bar at the bottom of the screen.

Close a second A second session may also be closed from any screen in SAP.
session.

2. Follow the menu path:
System>>End Session
Result: The additional session will close.

Doc#: S-010328-BAS-TT-2.00 3-25

3-26 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

Navigate Using Transaction Codes
SAP provides a unique multi-character identifier for each system task. This shorthand name is
called a transaction code. A transaction code may contain letters only, or a combination of letters
and numbers, for example, zstm (Summary Statement) or me53 (Display Requisition). Used in
conjunction with a prefix such as /n or /o, a transaction code becomes a navigation alternative to
using a menu path to get to a system task.

SAP only recognizes transaction codes when used with prefixes. Prefixes determine the way in
which SAP will access the indicated transaction. The two prefixes you will use most frequently
are:
/n ends the current transaction and switches to the new one without saving any data
in the current transaction

/o opens a new SAP session and accesses the new transaction without ending the
current one (which will remain open in the background session)

To navigate with transaction codes, combine a prefix with a transaction code and type the
resulting command (e.g. /nme53) in the Command field on the Standard Toolbar.

In the graphic below, the prefix /n indicates that the user wants to end the old transaction and
start a new one. The transaction code me53 tells the system which transaction screen (Display
Requisition) to view instead.

Command
field with
transaction
code

Figure 9

Doc#: S-010328-BAS-TT-2.00 3-27

Figure 10

The default setting for MIT users is to “Display technical names” (transaction codes) next to each
transaction name in the Navigation area. So if you are looking for the transaction code for a
particular function, you can find it just by following the menu path until it is displayed.

! If you do not see transactions codes listed next to transactions in the Navigation Area, refer
to Lesson 8 to change your settings so they are visible.

3-28 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Navigate Using Transaction Codes

Transaction codes can be entered from anywhere in SAP, but be careful if you are using the
prefix /n, as it will exit the current task without saving any data you have entered so far.

Navigation From wherever you are in SAP, follow the steps below.

Enter transaction code: 1. In the command field, enter the transaction code:
/n -- new transaction /nme53

2. Click the Enter button , or press Return on your
keyboard.

SAP will leave the current transaction and take you to
the Display: Purchase Requisition: Initial Screen.

Enter transaction code: 3. In the command field, enter the transaction code:
/o -- open new session /oxk03

! When using transaction codes, you must be careful to
distinguish between the letter ‘o’ and numeral zero. In
the example above, the prefix /o is the letter ‘o’, while
the transaction code xk03 uses numeral zero.

4. Click the Enter button , or Return on your
keyboard.

SAP will open a new session showing the Display
Vendor: Initial Screen. The previous transaction
Display: Purchase Requisition: Initial Screen will remain
open in the background session.

5. Close the new session and proceed to the next
Lesson.

Doc#: S-010328-BAS-TT-2.00 3-29

3-30 Doc#: S-010328-BAS-TT-2.00

✔SELF-CHECK
Using what you have learned in this lesson, perform the following tasks:

Questions
1. Locate the G/L account number for “Office Supplies”

2. Locate a book vendor with the word tatter in their name.

3. Identify the indicated parts of the screen:

a.

b.

c.

d.

Doc#: S-010328-BAS-TT-2.00 3-31


1. 420258

2. Tattered Cover Bookstore

3. a. Standard Toolbar
b. Application Toolbar
c. Screen Body
d. Status Bar

3-32 Doc#: S-010328-BAS-TT-2.00

!NOTES:

Doc#: S-010328-BAS-TT-2.00 3-33

3-34 Doc#: S-010328-BAS-TT-2.00

Lesson 4:

REPORTING FUNDAMENTALS
The first step in finding data or generating reports in SAP is defining search criteria to limit
the scope of the search. Search criteria are the values you have typed in or selected in the
fields on the SAP screen to perform a certain task. The amount of data stored in SAP is
huge. Limiting the search assures that you will get relevant information in a reasonable time
frame and without putting excessive demand on system resources.

OBJECTIVES
In this lesson you will become familiar with basic functions used in SAP reporting. At the
completion of this lesson you will be able to:

✔ Recognize the components of SAP basic search criteria screens
✔ Use two single-value search criteria types. For example: date search and text search
✔ Use Multiple Selection search criteria to create a report based on data from several
cost objects and multiple date ranges
✔ Use the Drill Down option to obtain more detailed information

Users can generate reports in SAP based on their SAP user profile and SAP authorizations.
Some data (e.g. Procurement data, some Master data) is “open” at MIT, which means that it
can be viewed by every user with access to the system. Other data is protected from view
by authorizations (e.g. Salary data), meaning that only users who are allowed to see that
specific data will be able to access it.

Doc#: S-010328-BAS-TT-2.00 4-1

4-2 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

Basic Search Selection Criteria
The purpose of this section is to familiarize you with the basic elements of a typical search
selection screen and to cover Basic Search selection criteria. Figure 1 on the next page is
an example of a typical search selection screen that we will use in the practice exercises in
this lesson.
In many instances you can specify the beginning and end of a range of values. In others
you are limited to a single value. Some fields are not used in MIT’s implementation of SAP
and therefore are not useful for searching (e.g., “sales document” and “network” in Figure 1).
Be sure to scroll down to the bottom of the selection screen to see all of the available fields;
some selection displays are longer than one screen.
Figure 1 on the next page shows an example of a search selection screen, in this case the
“Purchase Documents per Account Assignment” screen. In the following exercise you will
learn to access this basic search screen. This search will result in a list of Purchase Orders
that fit your selection criteria.
A Purchase Order is a document generated by Procurement from a requisition that has been
submitted and approved. A purchase order is an official order sent from MIT to a vendor
requesting goods and services. In the following exercise you will learn to access this screen.

! To learn more about Purchase Orders and Requisitions please see the SAP for MIT
web site or register for the SAP Requisition class <http://web.mit.edu/sapr3/>.

Drill Down
The process of double-clicking on an item to move to a level of greater detail is called
Drilling Down in SAP. In SAP, you can drill down to a detail document supporting a line item
in a report. For example you can drill down on a document listed on the Purchasing
Document for Cost Center report to view the detailed Purchase Order.

! To learn more about SAP reports, please see the SAP for MIT web site
<http://web.mit.edu/sapr3> or register for the SAP Reporting class.

Doc#: S-010328-BAS-TT-2.00 4-3

The selection screen consists of:

✔ Labels describing the fields available for searching (1)
✔ Single-value selection criteria entry fields into which you will type your criteria (2)
✔ Buttons indicating that multiple selection criteria are available (3)

(1) Field Labels

(2) Beginning
and ending
values for a
data range

(3) Multiple
Selection
Button

Figure1

! Be sure to scroll down to the bottom of the selection screen to see all of the available
fields; some selection displays are longer than one screen.

4-4 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Search Using the Document Date Field
In this exercise you will search for Purchase Orders created between 7/1/00 and 7/10/00.
You will generate an SAP Report using Basic Search criteria.


User Menu
"
Role ZMIT
"
Purchasing
"
PO Displays
"
PO Search Displays
"
ME2K - PO by Cost Object (double-click)

! You can enter the transaction: /nme2k in the Command field
and press the Enter/Return key.

2. In the Cost center field, enter 1633500.

! In many other selection screens you are permitted to enter only
one cost object type, i.e., Cost Centers or Internal Orders or WBS
Elements, but never a mix. If you want to report on several
different types of cost objects, you will need to run a separate
report for each cost object type or use a different search function
to capture the data you need.

Enter beginning date 3. Scroll down to Document Date and click in the leftmost field. Type
for date range 7/1/00 or click the Matchcode button to use the calendar to select
that date.

Enter ending date for 4. Click in the rightmost field for the Document Date criteria and type
date range 7/10/00 or click the Matchcode button to use the calendar to
select that date.

Doc#: S-010328-BAS-TT-2.00 4-5

View List Purchase 5. Click on the Execute button and review the resulting report.
Orders found within Scroll down, if necessary, to see the full report. (A sample screen
Date Range is shown below.)

6. Click on the Back button to return to the selection criteria
screen.

! The criteria you entered are gone. You will have to enter new
data to do another search. In some search selection screens,
search criteria are not “erased” when you back out of the report.

4-6 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Search Using Short Text & Vendor Fields
In this example you will search for Purchase Orders that were created for the vendor
Office Depot and also include tape. You will generate an SAP Report using basic
search selections that include vendor and short text fields.

Navigation If you are not at the Purchasing Documents selection screen
follow the Navigation path below. Otherwise, go to Step 2.

1. From the SAP User Menu screen, follow the navigation path:
User Menu
"
Role ZMIT
"
Purchasing
"
PO Displays
"
PO Search Displays
"


3. Scroll down the to the bottom of the search selection criteria
screen until you see the field labels Short text and Vendor
name.

Use wild card 4. Using the “wild card” technique, type *tape* in the Short text
search option (the field (this refers to the short text field in the purchase order
wild card search uses itself).
* * on either side of
the search term)

! Requisitions and Purchase Orders are covered in detail in the
SAP Requisitioning class.

Doc#: S-010328-BAS-TT-2.00 4-7

5. Using the “wild card” technique, type *Office Depot* in the
Vendor name field.

! When using wildcards remember that entering *office* might
get you additional listings for PO’s to other vendors with the
word “office” in their name. On the other hand it is possible to
miss some data if too specific a text string is entered, e.g.,
*envelopes* misses all the line items that have a description
of “envelope”. Wildcards should be used carefully and the
resulting data should be examined for completeness.

6. Click on the Execute button and review the resulting
PO’s. To view all documents, scroll down to see the full report.

! The display is in ascending order by SAP Purchase Order
number.

View resulting list of
PO’s, on which the
vendor is Office
Depot and tape was
ordered.

Purchase Order
number

4-8 Doc#: S-010328-BAS-TT-2.00

! The report displays only those line items which include the
purchase of tape, even if the Purchase Order has multiple
other line items. If you want to see the entire Purchase
Order, you need to drill down.

7. Double-click on a Purchase Order number (the PO number is
Drill Down
the 10 digit number in the display that begins with 45 or 55) in
order to view the entire PO with all the line items.

! The Drill Down feature gives you the ability to look at the
Purchase Order details screen by screen

8. Click on the Back button to return to the List Report.

9. Click on the Back button to return to the selection criteria
screen.

! The criteria you entered are gone. You will have to enter new
data to do another search. In some search selection screens,
search criteria are not “erased” when you back out of the
report.

Doc#: S-010328-BAS-TT-2.00 4-9

4-10 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

Multiple Selection Search Criteria

The purpose of this section is to familiarize you with the basic elements of Multiple
Selection searches.
You may need to generate reports using a more complex set of search criteria. For example,
you might need to look at a series of nonconsecutive cost objects within several date
ranges. To do this, SAP provides you with Multiple Selection search options on most
search criteria selection screens.
The availability of such an option is indicated by the presence of the Multiple Selection
button in the right-hand margin of the screen. The Multiple Selection button appears
to the right of the search field(s) for which it may be used, following along from left to right
across the screen. If the Multiple Selection button is not there, it means that multiple
selections are not available for the field(s) on that line. If the Multiple Selection arrow is
green, it indicates that complex search options have already been selected.

Multiple Selection
not available

Multiple Selection
button – multiple
selection available.

Figure 2

Doc#: S-010328-BAS-TT-2.00 4-11

Figure 3 Shows the Multiple Selection screen, which is standard across all SAP screens.
You can access the Multiple Selection screen by clicking on the Multiple Selection button
from any Basic Search screen.

The Multiple Selection button allows you to use these types of selection criteria for
reporting:
✔ Include or exclude individual nonconsecutive values
✔ Include or exclude multiple ranges values

Most of the time, the Multiple Selection button can be accessed either before or after
entering your values in the fields on the basic search selection screen. Occasionally you will
be forced to enter a value before clicking on the Multiple Selection button.
✔ Green buttons indicate to include values
✔ Red buttons indicate to exclude values

Use the green Single Vals
tab to include single non-
consecutive values.

Use the green Ranges tab
to include ranges of Use the red Single Vals
values. tab to exclude single
non-consecutive
values.

Use the red Ranges
tab (not shown) to
exclude ranges of
values.

Saves your search
criteria.
Figure 3

4-12 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Search Using Multiple Document Date Ranges
In this exercise you will search for all the Purchase Orders created on two specific dates, as
well as within several date ranges during 2000. You will generate an SAP report using
Multiple Selection criteria.

Navigation 1. From the SAP User menu screen, follow the navigation path:
User Menu
"
Role ZMIT
"
Purchasing
"
PO Displays
"
PO Search Displays
"


3. Scroll down until you can see the field name Document date
(the date the document was created).

Use Multiple
Selection search 4. Click the Multiple Selection button to the right of the
option Document date field. The multiple selection dialog box appears.

! When performing some searches in SAP you may be required
to enter an initial value in the main selection screen before
you will be permitted to open the multiple selection criteria
dialog box.

Doc#: S-010328-BAS-TT-2.00 4-13

Enter a single value
document date 5. Under the Single Vals tab (with the green button) enter the
following (observe the mm/dd/yy format):

First field: 07/02/00
Second field: 08/25/00

! You may also select the date by clicking the Matchcode
button to the right of the field, which opens a calendar
selection popup box.

Enter ranges of 6. Click on tab (with green button) titled Ranges and enter the
document dates following (observe the mm/dd/yy format):

Left box Right box
First row: 05/01/00 05/15/00
Second row: 09/01/00 09/07/00

! You told SAP that you want to see the PO’s for July
2, and Aug. 25, as well as all those between the
dates May 1–15, and Sept. 1–7 for cost object
number 1633500.

Copy dates to 7. Click on the Copy button to transfer these values to the
search selection “Purchasing Documents per Account Assignments“ search
screen selection screen. (This is an essential step!)

The Multiple Selection arrow for the Document date
field has turned green indicating that there are multiple
selection criteria in effect.

! If you need to delete a multiple selection, click the
Multiple Selection arrow, and then click on the Trash
Can icon at the bottom of the popped up dialog box.
(Do not do this now or you will not be able to
complete the exercise!) When you click the copy
button to return to the main screen, note that your
dates have been deleted.

4-14 Doc#: S-010328-BAS-TT-2.00

8. Click on the Execute button and review the resulting
PO’s. To view all documents, scroll down to see the full report.

View Purchase
Orders found.
The POs in this report
were created on July
2 nd and Aug. 25th, as
well as between May
1-5 and Sept. 1-7 for
cost object 1633500.

9. Click the Exit button return the SAP User Menu screen.

Doc#: S-010328-BAS-TT-2.00 4-15

4-16 Doc#: S-010328-BAS-TT-2.00

✔SELF-CHECK
Using what you have learned in this lesson, perform the following tasks:

Questions

1. Run a report for all of the Brinks Incorporated Purchase Orders
that were created for between 1/1/00 and 1/31/00. Your Cost
center is 1633500.

2. How would you Drill Down on a Purchase Order in order to see
the detailed line items?

3. Using the Multiple Selection criteria, run a report for all
Purchase Orders created between April 7th and May 5th 2000,
as well as June 4th and July 5th 2000. Use the Cost center
1633500.

Doc#: S-010328-BAS-TT-2.00 4-17


1. Use transaction ME2K.
Enter 1633500 in the Cost center field.
Enter 1/1/00 and 1/31/00 in the Document date fields.
Using the Matchcode on the Vendor field, search for vendor
Name *Brinks*

2. Double-click on the Purchase Order number within the report.

3. Use transaction ME2K.
Enter 1633500 in the Cost center field.
Access multiple selections on the Document date field.
On the Multiple Selections screen, enter the following:
Single values: 6/4/00 and 7/5/00
Ranges: 4/7/00 to 5/5/00

4-18 Doc#: S-010328-BAS-TT-2.00

!NOTES:

Doc#: S-010328-BAS-TT-2.00 4-19

4-20 Doc#: S-010328-BAS-TT-2.00

Lesson 5:

BASIC REPORT PRINTING
SAP reports can be printed via any SAP printer connected to MITnet. You should leave
these printers on at all times. They have a powersave feature that saves energy when they
are not being used, so there is no need to turn them off to conserve electricity.

OBJECTIVES
In this lesson you will become familiar with basic SAP report printing options. At the
completion of this lesson you will:
✔ Understand the printing environment
✔ Understand the basic procedure for printing reports
✔ Understand how and where to get help with printing problems

SAP users who are authorized to generate reports are also authorized to print reports. This
function tells SAP to send a copy of a report to the printer. The Print button can be found on
the Toolbar of many SAP screens.

Doc#: S-010328-BAS-TT-2.00 5-1

5-2 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

Printing Checklist (Before you begin printing)
✔ Make sure you know approximately how many pages of output will be printed by
paging through the report on-screen first, or by using the Print Preview button.
✔ If you do print more than you need, see the “Troubleshooting” section.
✔ Make sure you know to where you are printing. The default printer (the printer to
which your SAP printouts will be sent) is typically the one close to your office. Your
user profile should have a default printer. If it does not, you will be prompted to
enter the printer name each time you print the report. See Lesson 7 for
instructions on setting your default printer.

Troubleshooting
SAP contains a huge amount of data, and it is possible to generate a report that is tens and
even hundreds of pages long by running a report with overly broad selection criteria. If you
unintentionally send a large print job to the printer, here is what you can do:
✔ Pull out the printer paper tray to stop printing
✔ Collect the information needed to seek help (see the section below)

If your requested SAP print job is not printing, here is what to do:

Getting Help
Before you seek Help, you should collect some basic information for the Business Liaison
Team:
✔ The SAP environment that you are accessing: Production-1 or Production-2.
✔ The SAP spool request number, if you have one, from the bottom of your SAP
screen.
✔ The four-character name of your SAP printer. Follow the menu path
System>>User Profile>>Own data (transaction code: /nsu3) and click on the
Default tab, this will provide you with the name of your Default Printer. Many SAP
printers are labeled with the printer name, so check your printer for the label.

Doc#: S-010328-BAS-TT-2.00 5-3

5-4 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Practice Printing and Reviewing Requisitions

In this exercise you will first practice printing a List of Requisitions in order to become
familiar with one type of print procedure, and then practice printing an Individual
Requisition in order to become familiar with the second type of print procedure.

✔ The List Requisition report will print using the basic SAP font, the Requisitions will
be in a simple list format, and the report will have a cover page that indicates spool
requests, owner, and other selection options.
✔ The Individual Requisition report will have MIT-specific formatting that resembles a
spreadsheet and it will only include one requisition.
! You are not able to choose the format of your print job, the format is standard in SAP.


User Menu
"
Role ZMIT
"
Purchasing
"
Requisition
"
ZBP0 - Review/Print Req. (double-click)

Or type the transaction code: /nzbp0.

2. In the Plant / Int. Service Provider field enter GPLT.

3. In the Creation Date field enter 7/1/00 to 7/4/00.

4. Click on the Execute button .

Doc#: S-010328-BAS-TT-2.00 5-5

Review/Print
Requisitions List
Report

Print List 5. Click the Print button on the Standard toolbar to print the
List Requisitions report.

Continue
Button

6. Click the Continue button to start the print job.

5-6 Doc#: S-010328-BAS-TT-2.00

! The “Print Screen List” screen contains the name of your SAP
default printer. The screen also contains some customizing
options. Please be sure to scroll all the way down. Confirm that
all the Spool options boxes have been checked, and if you
want a cover sheet, select “D” in the SAP cover sheet field.
Cover sheets are useful in identifying your print job at the
printer.

Clicking “Continue” causes the print job to begin. In a few moments,
you should be able to collect a printout of the Requisition list at the
printer. At the end of the print job you will return to the “Review/Print
Requisition” screen.

From the “Review/Print Requisition” screen:

Print Individual 7. Check the boxes to the left of one or two Individual
Requisitions Requisitions that you want to print.

Print Req
button

Selected
Individual
Requisitions

8. Click the Print Req button on the Application tool bar, in order to
print the Individual Requisitions.

Doc#: S-010328-BAS-TT-2.00 5-7

The “Print:” popup box will appear.

Print button

Enter other printing ! Confirm that all the Output options boxes have been
selection options checked, as well as the Cover page options. Cover sheets
are useful in identifying your print job from others if you have
a printing problem.

9. Click on the Print button at the bottom of the screen.

Clicking the “Print” button causes the print job to begin.

A dialog box opens informing you of the number of Requisitions
printed and what printer they were sent to.

10. Click the Continue button.

In a few moments, you should be able to collect printouts of your
selected requisitions at the printer. At the end of the print job
you will return to the “Review/Print Requisition” screen.

You can now compare and contrast the two different print
functions. The differences between these two print functions can
be best viewed through the results of the print job.

11. Click the Exit button twice to return to the SAP User menu.

5-8 Doc#: S-010328-BAS-TT-2.00

!NOTES:

Doc#: S-010328-BAS-TT-2.00 5-9

5-10 Doc#: S-010328-BAS-TT-2.00

Lesson 6: (optional)

DOWNLOADING SAP REPORTS
Data from SAP reports can be downloaded, or transferred from SAP, into a local file on your
desktop or server. That file can then be opened in a spreadsheet application such as Microsoft
Excel, or imported into other applications. Downloaded data is typically unformatted – i.e. report
titles and column headings are not downloaded, only data.
Data from externally maintained files (e.g. Microsoft Excel) can also be uploaded into SAP for the
purpose of transferring large volumes of information. This is a convenient alternative to manually
entering the data. To learn more about the Upload process please refer to the on-line
documentation. http://web.mit.edu/sapr3/

Some users will never download or upload data, but others may use these functions, for
example to combine SAP report data with data that is not in SAP for the purpose of creating
customized reports in other applications.

OBJECTIVES
In this lesson you will become familiar with the SAP Download function, which permits you to
download a report to a local file and then open it in your spreadsheet of choice. At the completion
of this lesson you will be able to:
✔ Use the Download button to download an SAP report
✔ Use an SAP menu path to download an SAP report

Users can generate reports in SAP based on their SAP user Profile and SAP authorizations. You
must have proper authorization to generate reports on particular cost objects, cost element
groups, as well as SAP transactions.

Doc#: S-010328-BAS-TT-2.00 6-1

6-2 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Download the Purchasing Overview by Cost Collector Report
In this exercise you will download the Purchasing Overview by Cost Collector (this term is used
interchangeably with the term Cost Object) report into a Microsoft Excel spreadsheet by using the
Download button.


User Menu
!
Role ZMIT
!
Reports
!
Purchasing Reports
!
ZBP3 - By Cost Object (double-click)

"You can enter the transaction: /nzbp3 in the Command field and
press the Enter/Return key.

Enter selection 2. In the Invoice Posting Date fields, type 7/01/00 in the left and
criteria 8/01/00 in the right.

3. Enter a Cost Object (Cost center, Internal order, WBS element). In
this exercise you will use Cost center 1633500.

Doc#: S-010328-BAS-TT-2.00 6-3

Your report is displayed on the screen.

Begin Download 5. Click on the Download button on the toolbar.

Select folder and 6. The “Transfer to Local File” dialog box come up. Click on the
file name for the Matchcode button to open the “Save as……” dialog box..
downloaded report

Save Report as a 7. Use the standard PC or Mac procedures to choose a
spreadsheet directory/folder to save the file in.
document For the purpose of this exercise, save the file on your Desktop.
a) Enter the file name testdl.xls
b) Click the OK or Save button to accept your selection. The file
name appears in the “Transfer to a local file” dialog box.

6-4 Doc#: S-010328-BAS-TT-2.00

Select option to 8. In the “Transfer to a local file” box, click the Matchcode button for
download file as Data Format. Select DAT from the matchcode list.
data (DAT)

"The DAT format downloads data ready to import into a
spreadsheet. Column headings and cost element (G/L account)
subheadings are not downloaded and must be entered manually
into the spreadsheet.

9. Click the Transfer button to download your report.

"You will see a message, at the bottom of the SAP screen,
indicating the number of bytes downloaded. This confirms that
the download is complete.

10. To view the downloaded file, go to your Computer Desktop and
double click on the testdl.xls file. You may be prompted for an
application to use to open the file.

Opening/Viewing the
"Note: You may save the downloaded report in any folder that
you choose: you are not limited to saving it on the Computer
downloaded report
Desktop.

11. Return to SAP and click the Cancel button on the “Download
to local file” screen. This will take you back to report search screen
“ Purchasing Overview by Cost Collector”.

Doc#: S-010328-BAS-TT-2.00 6-5

6-6 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Alternate Download Procedure Using a Menu Path
In this exercise you will download the Purchasing Overview by Cost Collector (term used
interchangeably with Cost Object) report into a Microsoft Excel spreadsheet by using the
alternate menu path method. This method is used when your report does not have a Download
button, as is often the case with research reports.

Navigation If you still have the Purchasing Overview by Cost Collector report
open proceed to Step 5. Otherwise go to Step 1.

1. Type the transaction code /nzbp3. Or access the SAP User menu
screen and follow the Navigation path:
User Menu
!
Role ZMIT
!
Reports
!
Purchasing Reports
!
ZBP3 - By Cost Object (double-click)

Enter the selection 2. In the Invoice Posting Date fields type 7/01/00 in the left and
criteria 8/01/00 in the right.

3. Enter a Cost Object (Cost center, Internal order, WBS element). In
this exercise you will use Cost center 1633500.


Your report is displayed on the screen.

Begin download 5. Follow the menu path: System>>List>>Save>>Local file.

"This method is used when the Download button is not available
on the report.

Doc#: S-010328-BAS-TT-2.00 6-7

Save report as a 6. Click the radio button marked Spreadsheet to save the data with
spreadsheet
document numeric processing capability, then click the Enter button .

Select folder and 7. The “Transfer to Local File” dialog box (as displayed in the
file name for previous exercise) comes up. Click on the Matchcode button to
downloaded file open the “Save as…” dialog box.

6-8 Doc#: S-010328-BAS-TT-2.00

8. Use the standard PC or Mac procedures to choose a
directory/folder to save the file in.
For the purpose of this exercise, save the file on your Desktop.
a) Enter the file name test2dl.xls
b) Click the OK or Save button to accept your selection. The file
name appears in the “Transfer to a local file” dialog box.

9. Click on the Transfer button.

Download is
complete
"The dialog box disappears, the file is saved, and a message
appears on the status line of the SAP screen indicating that a
specific number of bytes were transferred. This confirms the
download has completed.

Downloaded file in 10. To view the downloaded file, go to your Computer Desktop and
spreadsheet double click on the file.

11. Return to SAP and click the Cancel button on the "Download
to local file" screen. This will take you back to the report search
screen "Purchasing Overview by Cost Collector".

Doc#: S-010328-BAS-TT-2.00 6-9

6-10 Doc#: S-010328-BAS-TT-2.00

"NOTES:

Doc#: S-010328-BAS-TT-2.00 6-11

6-12 Doc#: S-010328-BAS-TT-2.00

Lesson 7:

USER DEFAULT SETTINGS
Defaults are set when an SAP user profile is created. Most of these you should not change
unless your business position or location has changed. It is important that the user defaults are
correct in SAP, as SAP uses them in a number of reports and business transactions.

OBJECTIVES
In this lesson you will learn how to review and change user settings and user information. At the
completion of this lesson you will be:
✔ Familiar with the SAP user profile
✔ Able to set your user defaults
✔ Able to specify a default printer
✔ Able to review your user address

✔ None

Doc#: S-010328-BAS-TT-2.00 7-1

7-2 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

Configuration Options

Address
This screen shows personal data such as MIT address, MIT phone, etc. which is updated monthly
from Human Resources and Bursar records (via a feed from the Data Warehouse). If it is not
correct, contact Human Resources (for faculty and staff) or the Bursar’s Office (students) to have
your information updated. If you correct the data in SAP, but the correction is not made at the
data source, your correction will be overwritten by the monthly update.

Defaults
This screen shows the defaults that were set up when your SAP profile was created. Most of
these you should not change. The settings on this screen (shown in a later practice exercise)
include the Start menu and your printer name. Other settings include the date format and
decimal notation. Your userid cannot be changed.

Parameters
This screen shows default field data entries and screens used when working in SAP. You can
specify a default entry for some fields where you frequently enter the same data.

Doc#: S-010328-BAS-TT-2.00 7-3

7-4 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Review the User Address in Your User Profile
It is important that your Address data is correct in SAP, as SAP uses it in a number of reports.

Navigation 1. From the menu bar at the top of the screen follow the navigation path
System>>User profile>>Own data (transaction code: /nsu3).

When you do this, SAP opens a second session displaying the “Maintain
User Profile” screen.

The screen above is an example.

The Address tab is displayed. Review your address data on your own screen.

Doc#: S-010328-BAS-TT-2.00 7-5

If the data is incorrect, you will need to notify the Human Resources Office (for
faculty and staff) or the Bursar’s Office (for students), as their records are the
source of all this information except for “Department.” SAP is updated via a
monthly feed from the Human Resource and Bursar’s systems. If your
department field is incorrect, you can update it, as that data is not fed into SAP
from another system. If you would like your fax number(s) in SAP, enter it in
the Fax field.

Remember that you are reviewing data in the SAP practice environment, which
is not updated as frequently as the Production system. You should not call for
assistance unless the information in the Production system is incorrect.

Continue to the next exercise before saving.

7-6 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Reviewing the User Defaults in Your User Profile
The Default tab in your User Profile contains user defaults that should be reviewed.

Navigation If you are not at the Maintain User Profile screen follow the Navigation path
below. Otherwise, go to Step 2.

1. From the menu bar at the top of the screen follow the navigation path:

Accessing the User 2. Click on the Defaults tab.
defaults

3. The Start Menu field should be blank for MIT users.

Doc#: S-010328-BAS-TT-2.00 7-7

Set English as 4. The Logon language field should be set to “EN” (for English.) SAP
default language supports many different languages. However, at MIT, only English is
supported. This setting should not be changed.

SAP Default printer 5. The Output Device is the most important default setting for you to
review, as this is the name of the printer to which your SAP printouts will
be sent. When your SAP profile was initially set up, if your default printer
was known, it was entered here. If not, this field was left blank, and you
will want to enter it yourself. This will save having to specify an output
device (printer) each time you print something out of SAP.

!If the Output Device is blank or incorrect, first you need to find out the
name of your SAP printer. If you know where it is, the easiest way is to
go look at it. Many SAP printers are labeled with their four-character
names. Enter the printer name, and skip to the next step. If your printer
is not labeled, please see the next Practice Exercise for instructions on
setting your default printer.

6. On the "Maintain User Profile" screen, confirm that the boxes for Output
immediately and Delete after output are checked.

Confirm other 7. Confirm that the Decimal notation is set to 1234567.89, the center
defaults choice of the three formats offered.

8. Confirm that the Date format MM/DD/YYYY is selected.

9. Confirm that Personal time zone is set to EST.

Continue to next Continue to the next exercise before saving.
Practice

(optional) The next two Practice exercises are optional. If you are not going to complete
Save changes to the optional exercises, save the user defaults now by clicking the Save button
user defaults
. This will take you back to the SAP User Menu screen. To close this
window (end session), click the Close box in the upper left corner of the
Macintosh screen, or the X in the upper right on a PC.

7-8 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE (optional)
Select or Change your SAP Default Printer
The exercise below explains how to find the name(s) of your local SAP printer(s), and how to
enter a printer default into your SAP Profile. You need only complete this step if no Output
Device has been entered for you, or if the Output Device in your user profile is incorrect.
Entering a default here will save you from having to enter a printer name every time you print a
document from SAP.

Navigation If you are not at the Maintain User Profile screen follow the Navigation
path below. Otherwise, go to Step 2.

1. From the menu bar at the top of the screen follow the navigation
path:

Accessing the User 2. Click on the Defaults tab.
defaults

!If the Output Device field is filled in, that indicates that a default
printer is already set up for you.

Doc#: S-010328-BAS-TT-2.00 7-9

!If you have a default printer indicated in the Output Device field,
you do not have to continue with this practice exercise.

If you have a default printer entered and do not want to continue
with this exercise, save the user defaults now by clicking the Save

button . This will take you back to the SAP User Menu screen.
To close this window (end session), click the Close box in the
upper left corner of the Macintosh screen, or the X in the upper
right on a PC.

3. If you do not have a default printer set up or you wish to change
your default printer, click on the Matchcode button in the Output
Device field.

The "Restrict Value Range" dialog box is displayed.

!The “Restrict Value Range” dialog box allows you to search for
your SAP printer based on Output Device, Short Name,
Location, and Device Type. The Location search option is
based on MIT building locations.

4. Use the Wild Card search and enter your building number in the
Location field.

!This field is case sensitive.

7-10 Doc#: S-010328-BAS-TT-2.00


!You might need to scroll through the list in order to find the
correct Output device.

6. Select the Output device that is closest to your office.


You will return to the User Profile screen.

Doc#: S-010328-BAS-TT-2.00 7-11

!You have just practiced selecting and setting up your SAP
default printer in the sap-edu practice environment. Please
remember to check your User Profile and SAP Default printer
in the Production environment.

Continue to next Continue to the next exercise before saving.
Practice

(optional) The next Practice exercise is optional. If you are not going to complete
Save changes to the next exercise, save the user defaults now by clicking the Save
user defaults
button . This will take you back to the SAP User Menu screen. To
close this window (end session), click the Close box in the upper left
corner of the Macintosh screen, or the X in the upper right on a PC.

7-12 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Setting User Parameters (Optional)
Parameters allow you to make certain information default into a field or screen in SAP.

Change Parameters On the Maintain User Profile Screen:

1. Click on the Parameters tab.

Find the Parameter 2. Switch to your other open SAP session by clicking on the other
ID SAP screen (Mac) or using the Windows Task Bar (PC).

Doc#: S-010328-BAS-TT-2.00 7-13

3. From the SAP User menu Screen, follow the navigation path:
User Menu
"
Role ZMIT
"
Purchasing
"
Requisitions
"
Create a Requisition (double-click)

4. Click on the Acc. assignment cat. field.
This field is always completed with an X (except for Facilities users)
when creating a requisition. Making it default to X will make
creating requisitions easier.

5. Click the Help button .

6. Click the Technical Information button.

7. Look for the Parameter ID field on the Technical Information
dialog box and note the entry: KNT.

!Not all fields have a Parameter ID. If there is no Parameter ID,
it is not possible to set a default entry for that field.

8. Switch back to the open session displaying the "Maintain User
Profile" screen.

9. In the first blank field in the Parameters column, enter KNT.

7-14 Doc#: S-010328-BAS-TT-2.00

10. In the Value column, enter the default entry X.

Now, each time you access the “Create Requisition: Initial Screen,” the
Acc. assignment cat. field will be filled with an X.

!You can set a default of your most commonly used entry in a
field, but may also change the entry if you occasionally need to
enter something different.

Save changes to 11. When finished making changes, save the user defaults by clicking
user defaults
the Save button . This will take you back to the SAP User
Menu screen.

12. Close this Maintenance window (end session) by clicking the Close
button in the upper left corner of the Macintosh screen, or the X on
a PC.

Doc#: S-010328-BAS-TT-2.00 7-15

7-16 Doc#: S-010328-BAS-TT-2.00

!NOTES:

Doc#: S-010328-BAS-TT-2.00 7-17

7-18 Doc#: S-010328-BAS-TT-2.00

Lesson 8: (optional)

END USER CUSTOMIZATION

In this lesson you will learn how to customize SAP to your needs. All customization is optional,
and all settings are recommendations only. You can customize screen colors, frequently used
transactions, and specific user options.

For color settings, available options are different on Macs and PCs - you should use the
instructions that apply to the type of computer you are using to complete this self-study.

OBJECTIVES
In this lesson you will learn how to customize certain screens and navigation shortcuts in SAP.
At the completion of this lesson you will be able to:

✔ Set and save specific screen options

✔ Add and delete favorites

✔ Set and save color settings

✔ None

Doc#: S-010328-BAS-TT-2.00 8-1

8-2 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

User Settings
Like any other software package, SAP is delivered with a particular series of settings that
affect what each user sees on the screen. This section will describe some of those settings,
indicate what the default settings are for MIT, and make a recommendation about whether you
should or should not change these settings.

User Settings are formatting options that modify the look and feel of SAP. The Settings
screen allows you to choose whether you see the water graphic in the work area of certain
screens, whether transaction codes are viewed as part of each transaction title, where
Favorites are placed on the custom SAP User menu as well as the SAP Standard menu, and
whether all transactions or only Favorites are viewed.

For each of these settings we will provide a recommendation for how the setting should be
used. It is important to remember that customizing User Settings is optional, and our
recommendations are guidelines, not requirements.

Settings (For the SAP User menu Screen)

(1)
(2)
(3)
(4)
(5)

(1) Display favorites at end of list
The default for this setting is checked.
When this setting is checked, the Favorites folder is displayed below the User and SAP menus
in the Navigation Area. If it is unchecked, the Favorites menu moves to the top of the display.
You may check or uncheck this box according to personal preference.

Doc#: S-010328-BAS-TT-2.00 8-3

(2) Do not display menu, only display favorites
The default for this setting is unchecked.
When this setting is checked, the Favorites folder is the only thing displayed in the Navigation
Area, and the User and SAP menus are inaccessible. If it is unchecked, all menus are
displayed. We recommend that you leave this box unchecked so that all menu options are still
accessible.

(3) Do not display picture
The default for this setting is unchecked.
When this setting is checked, the water graphic on the right hand side of the Navigation Area
will disappear. If it is unchecked, the water graphic is displayed. You may check or uncheck
this box according to personal preference.

(4) Display technical names
When this setting is checked, the transaction code is displayed next to each item on the User
and SAP menus. If it is unchecked, the transaction code is not displayed. You may check or
uncheck this box according to personal preference.

(5) Show first level
When this setting is checked, the Role ZMIT subfolder is displayed on the User menu. If it is
unchecked, that submenu is not displayed. Although this setting primarily affects users with
access to multiple submenus we recommend that you leave this box checked so that all menu
options will display properly.

8-4 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
In this exercise you will confirm your screen settings and change them if you wish.

! Practicing with this customization in the Practice environment will not carry over to
Production. If you want to customize your view in Production, you will have to repeat these
steps in the Production environment.

Navigation Access the SAP User menu if you are not already there.

1. From the menu bar at the top of the screen, follow the
menu path:
Extras >> Settings

Doc#: S-010328-BAS-TT-2.00 8-5

Confirm Settings As explained in the Getting Started section, the default
menu screen settings (recommended settings) for MIT
users are as follows:

Display favorites at end of list (check)

Do not display menu, only display favorites (no check)

Do not display picture (no check)

Display technical names (check)

Show first level (check)

Change Settings 2. You may change any of these settings by checking or
unchecking the boxes next to each item.

Descriptions of Settings 3. When you have checked and unchecked the settings
according to your preference, click the Enter button

to activate your changes.

! You will be returned to the Navigation Area where you
can view the results of any changes you might have
made.

8-6 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

Create and Use Favorites
Favorites are shortcuts to your most frequently used functions. You can create, change, and
delete them in any way that suits you without affecting the User Menu or the SAP standard
menu.

Favorites allow you to get to those functions you use most often without having to navigate
through the menu paths or enter transaction codes.

Favorites
Folder

Figure 1

Doc#: S-010328-BAS-TT-2.00 8-7

8-8 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Create and Use Favorites

Creating Favorites in the Practice environment will not carry over to Production. If you want to
create Favorites in Production, you will have to repeat these steps in the Production
environment.

Navigation Access the SAP User menu screen, if you are not already
there. The Favorites folder is at the bottom of the
Navigation Area.

! You do not need to have authorization to perform a
particular transaction just to add it to your Favorites list.
However, if you are not authorized, you will be unable
to access the transaction when you try to double-click
on it.

1. Follow the navigation path:
User Menu
"
Role ZMIT
"
Master Data
"
Financial Data

2. Click only once on the Display Cost Object transaction
to highlight it.

3. On the toolbar, click the Add to Favorites button

.

4. Double-click on your new Favorite to go directly to the
Display Cost Object transaction.

5. Click the yellow arrow to return to the SAP User
Menu.

Doc#: S-010328-BAS-TT-2.00 8-9

Delete a Favorite 6. Click once on your new Favorite to highlight it.

7. On the toolbar, click the Delete Favorites button

.
Your Display Cost Object Favorite is deleted.

Change a favorite You can change the names of your Favorites to make
them easier to see on the screen (most are quite long).

! Completely changing the title of a favorite SAP
transaction could cause confusion if business help is
required, so we recommend that you simply delete the
file path portion of the name with the exception of the
transaction title. See the example below.

8. Recreate the Favorite Display Cost Object following
the steps on the previous page.

9. Click once on the Display Cost Object Favorite to
highlight it.

10. Follow the menu path at the top of the screen:
Favorites >> Change

The Change a favorite text box will appear.

11. Delete the menu path information while retaining the
transaction title. The easiest way to do this is to
highlight the text you want to remove and hit delete on
your keyboard.

Change:
Role ZMIT > Master Data > Financial Data >
Display Cost Object
To:
Display Cost Object

8-10 Doc#: S-010328-BAS-TT-2.00

12. Click the Enter button and see how the name of
your Favorite has changed.

Add other objects This option provides a shortcut to frequently used web
sites, such as the SAP for MIT online documentation. One
limitation, however, is that it launches those links in
Internet Explorer only on the Mac. If you do not have
Internet Explorer installed on your computer, you will not
be able to use this function.

Add a web address to 13. Follow the menu path at the top of the screen:
favorites
Favorites > Add other objects

The Add additional objects selection box will appear.

14. Click the radio button next to Web address or file


a) In the Add a Web address or file path pop-up box
that appears, enter the following title in the Text
field:
SAP Home Page

b) In the Web address or file field, enter:
http://web.mit.edu/sapr3


The web link will be added to your Favorites folder. To
access the documentation, simply double-click on the
web link in the Favorites folder.

Doc#: S-010328-BAS-TT-2.00 8-11

8-12 Doc#: S-010328-BAS-TT-2.00

! GETTING STARTED

Changing Color Settings
You may change the your SAP color settings according to your preference.

SAP Color Settings are GUI-specific. This means that they are attached to the software on
the desktop computer you are currently using, not to your user profile. So if another user logs
into SAP on your computer, your selected user settings will show. If you log into SAP at
different computer, your user settings will not be in effect.

The process for changing SAPgui colors is different on a Mac and a PC, and color options
vary.

On a PC, you can access color settings by clicking on the SAPgui Settings button at the
bottom right of the Windows screen, on the task bar.

Windows
Task Bar

Figure 2
SAPgui
Settings
Button
! It is important to remember that the color setting
button on a PC is located on the Windows task bar,
not on the SAP screen

Doc#: S-010328-BAS-TT-2.00 8-13

On a Mac, color settings can be accessed by clicking on the SAPgui Settings button, which
looks like a question mark in the upper right corner of the screen.

SAPgui
Settings
Button

Figure 3

8-14 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Hue Shifting (Macintosh)
The new SAPgui settings box allows you to change your screen colors.

Navigation From any screen in SAP:

1. Click on the SAPgui Settings button in the far
upper right corner of the SAP window.

! This button should not be confused with the Help
button, which looks like a question mark in a yellow
circle, and is located on the toolbar.

A dropdown box appears with the following options:

Hue Shifting refers to changing the colors on your SAP
screens. This choice is available to all users, although the
options are somewhat limited.

Theme Customizing box 2. Click on the SAP GUI Settings button

3. Select HueShifting

The SAP Theme Customizing box appears.

Doc#: S-010328-BAS-TT-2.00 8-15

Apply Custom Hue 4. Click once on the custom hue you would like to use in
order to select it. The default is BrightComplementary.

5. Click the Apply button

In the background, you will see the new color scheme
take effect.

6. Once you select the color scheme you like best, click

OK .

! Remember, these settings are GUI specific rather than
user or environment specific - if another user logs into
SAP on your computer, your selected custom hue will
show. If you log in to SAP from a different computer,
your custom settings will not be in effect.

8-16 Doc#: S-010328-BAS-TT-2.00

✎ PRACTICE
Customize SAPgui Colors-Settings (Windows)

Navigation Access the SAP User menu screen, if you are not already
there.

1. Go to the lower right corner of the Windows Task bar.

2. Click on the SAPgui Settings button .

SAPgui Settings Dialog A SAPgui dialog box opens which is used to specify
Box general settings and color settings for SAP screens.

The Dialog box consists of two tabs: General Settings and
Color Settings.

Doc#: S-010328-BAS-TT-2.00 8-17

General Setting Tab 3. Click and select any of the General Tab options that
you choose to change:

Change the Theme – for more contrast
Change Font Size
Enable Logon Video – the water graphic on startup
Turn the Sound on or off

Color Settings Tab 4. Click on the Color Settings tab.

5. Click and choose a color theme from the left side of the
screen.

! The color theme changed on the right side of the
screen.

6. If you choose to restore your color to the original
SAPgui color theme, click on the Restore button
in the center of the screen.

7. Choose a different color theme from the left side of the
screen

8. Once you have selected the color scheme you like,
click OK.

The colors of your SAP screen have changed.

! Remember, these settings are GUI specific rather than
user or environment specific - if another user logs into
SAP on your computer, your selected colors will show.
If you log in to SAP from a different computer, your
custom settings will not be in effect.

8-18 Doc#: S-010328-BAS-TT-2.00

! NOTES:

Doc#: S-010328-BAS-TT-2.00 8-19

8-20 Doc#: S-010328-BAS-TT-2.00

Lesson 9:

LOG OFF SAP

OBJECTIVES
In this lesson you will exit the practice environment. At the completion of this lesson you will be
able to:

✔ Log off the sap-edu environment

✔ Destroy your Kerberos ticket


It is important to remember to log off when you are not using the SAP system as it contains
confidential business information.

! The SAP Production system will automatically log you off after two hours without activity,
but it is recommended that you log out if you plan to leave your work area for an
extended period of time.

Doc#: S-010328-BAS-TT-2.00 9-1

9-2 Doc#: S-010328-BAS-TT-2.00

Log Off the SAP Practice Environment (Macintosh)

Navigation 1. From the menu bar at the top of the screen, follow the
menu path
System >> Log Off

A popup box will appear with the message "Unsaved data
will be lost. Do you want to log off?"

2. Click the Yes button .

Quit the SAPgui To Quit the SAPgui subsequent to logging off, please be
aware that the Quit command is now located under the Apple
menu when SAP is the active application on your desktop.

3. To quit the SAPgui application, use one of these options:

> Quit
or
command+q

4. Select Kerberos Manager from the Apple menu
Destroy your
(under Recent Applications or Control Panels).
Kerberos Ticket

5. Click the Destroy Tickets button.
This will destroy your Kerberos Ticket.

! It is not necessary to destroy your ticket if you will be
utilizing other Kerberized systems (such as Eudora) after
logging off SAP.

Doc#: S-010328-BAS-TT-2.00 9-3

9-4 Doc#: S-010328-BAS-TT-2.00

Log Off the SAP Practice Environment (Windows)

Log Off SAP 1. From the menu bar at the top of the screen, follow the menu path
System >> Log Off

A popup box will appear with the message "Unsaved data will be
lost. Do you want to log off?"

2. Click the Yes button .

Destroy Your
Kerberos Ticket 3. Click on the Windows Task bar.

This will open the Leash32 screen.

4. Click on your ticket, then click the Destroy Ticket(s) button .

5. Click .

6. Click the Close button in the upper right corner of the Kerberos
window.

! It is not necessary to destroy your ticket if you will be utilizing other
Kerberized systems (such as Eudora) after logging off SAP.

Doc#: S-010328-BAS-TT-2.00 9-5

9-6 Doc#: S-010328-BAS-TT-2.00

!NOTES:

Doc#: S-010328-BAS-TT-2.00 9-7

9-8 Doc#: S-010328-BAS-TT-2.00

Basic guide of sap

More Related Content

What's hot (19)

Similar to Basic guide of sap (20)

More from Ramesh Kumar (20)

Basic guide of sap