Navisworks freedom quick_reference

WP‐CAD‐00074 March 2012
Guide by Andy Davis
Autodesk Navisworks Freedom
Quick Reference Guide

Quick Reference Guide to Autodesk Navisworks Freedom

Opening a Model
To open a model, click on the Application Button to open the Application Menu then either choose from the list
of Recent Documents or click Open:

Alternatively, click on the Open icon on the Quick Access Toolbar:

Choose a file in the Open window and click the Open button.

Supported File Types
Navisworks Freedom can open the following types of file:
 NWD files are Navisworks model files that have been published using the Navisworks Publisher tool.
 DWF, DWFX files are free to view files produced by Autodesk software for sharing 2D and 3D information.

Starting Again
To close the current model and open a new one, choose the New option from the Application menu:

Alternatively, click on the New icon on the Quick Access toolbar:

Navigating the Model
Navisworks provides three mechanisms for navigating around a model: the ViewCube, the Navigation Bar and
SteeringWheels.
ViewCube
The ViewCube tool provides visual feedback about the current viewpoint of the model as view changes occur.
When the cursor is positioned over the ViewCube tool, it becomes active.
Drag or click the ViewCube, switch to one of the available pre‐set views, roll the current view, or change to the
Home view of the model.

Right‐click on the ViewCube or click on the down‐arrow glyph at the bottom right of the ViewCube to access the
ViewCube context menu.
When items are selected in the model, clicking the Lock to Selection option re‐defines the centre of the current
view and the distance from centre for the view based on the selection of item effectively setting the pivot point
for the view.

Tip: Set the Home View
The Home View is a special view stored with a model that makes it easy to return to a known or familiar view. Any
view of the model can be defined as the Home view.
Click on the house glyph at the top left of the ViewCube to return to the Home View:

The behaviour of the ViewCube is controlled by several configuration options set through the Navisworks Options
Editor. They are accessed by choosing the ViewCube Options… option from the ViewCube Context menu:

Note: if Fit‐to‐view on change is selected above, clicking on the ViewCube will cause the model to be rotated
around the current centre of the scene and zoomed out to fit the whole scene into the Scene View. If this check
box is clear, clicking or dragging the ViewCube rotates the model around the current pivot point and does not
zoom in or out.

Navigation Bar
The Navigation Bar is a dockable toolbar that provides quick access to all of the navigation tools that are available
in Navisworks.
Click on the down‐arrow glyph at the bottom right of the toolbar to access the Customize menu. Here the various
navigation tools can be turned on or removed from the Navigation Bar and the position of the toolbar itself can
be set relative to the Navisworks Scene Window.

Clicking on the Navigation Bar Options… menu item opens the Navisworks Options Editor to allow various
Navigation tool options to be set:

Navigation Tools
The tools available on the Navigation Bar are shown below:
 ViewCube. Shows the ViewCube – this tool is only displayed when the ViewCube is turned off.

 SteeringWheels. Accesses the SteeringWheel tools.

 Pan. Moves the view parallel to the screen.

 Zoom Window. Allows a box to be drawn and the model to be zoomed into that area.
 Zoom. Standard click/drag zoom.
 Zoom Selected. Zooms in/out to show the selected geometry.
 Zoom All. Zooms out to show the whole scene.

 Orbit. Moves the camera around the focal point of the model. The up direction is always
maintained, and no camera rolling is possible. Use CTRL + Left‐Click to set the focal point.
 Free Orbit. Rotates the model around the focal point in any direction. Use CTRL + Left‐Click to set
the focal point.
 Constrained Orbit. Spins the model around the up vector as though the model is sitting on a
turntable. The up direction is always maintained. Use CTRL + Left‐Click to set the focal point.

 Look Around. Looks around the scene from the current camera location.
 Look At. Looks at a particular point in the scene. The camera moves to align with that point.
 Focus. Looks at a particular point in the scene. The camera stays where it is.

 Walk. Moves through a model as if walking through it.

Press and hold the Left Mouse Button while dragging the mouse to walk, release the mouse button to
stop. Alternatively, use the Up, Down, Left and Right arrow keys for greater control.

Tip: Use in conjunction with the Tilt Window to control the vertical alignment of the camera.

The following options are available in walk mode:

 Collision. Adds ‘mass’ and a ‘collision volume’ to the camera to prevent navigation
through other objects, points or lines in the scene.
 Gravity. In conjunction with collision, adds the pull of gravity to the camera – walking
over empty space will pull the camera down to infinity.
 Crouch. In conjunction with collision, the camera will crouch under any objects that it
cannot walk under at its specified height
 Third Person. Adds an avatar to the screen to show navigation from the perspective of a
third person.
Tip: Collision settings are modified in the Collision Window which is accessed by clicking the Settings
button in the Edit Current Viewpoint Window:

 Fly. Moves through a model like in a flight simulator.
Press the Left Mouse Button to fly forwards. With the Left Mouse Button pressed: drag forward to climb,
drag back to descend, drag left or right to bank. Use the Left and Right arrow keys to roll left and right.
Use the Up and Down arrow keys to zoom in and zoom out.
 Gravity, Crouch and Third Person options are available as in Walk mode:

Navigating with the Wheel Mouse or Three Button Mouse

The Wheel Button or Middle Button of a three button mouse can be used in conjunction with other navigation
tools to navigate the Navisworks model. The following actions may be performed:

Mouse Control Navigation Action
Scroll Wheel Forward Zoom In
Scroll Wheel Backwards Zoom Out
Press Wheel / Middle Button and drag Pan
Press SHIFT key and Wheel / Middle Button and drag Orbit
Press CTRL + SHIFT keys and Wheel / Middle Button and drag Locate Pivot Point

SteeringWheels
SteeringWheels are tracking menus that follow the cursor. They combine many of the common navigation tools
into a single interface and are specific to the context in which a model is being viewed.
Using the mouse, press down and drag on a wedge of the wheel to interact with it; release the mouse button to
return to the wheel.
Click on the x glyph at the top right of the wheel to close it.
Click on the down‐arrow glyph at the bottom right of the wheel to access the wheel menu:

Click on the SteeringWheels Options… menu option to open the Navisworks Options Editor and access the
SteeringWheel configuration options:

View Object Wheel
The View Object Wheel is used to view individual objects or features in a model.

The wheel provides the following options:
 Center. Specifies a point on a model to adjust the centre of the current view or change the target point
used for some of the navigation tools.
 Zoom. Adjusts the magnification of the current view.
 Rewind. Restores the most recent view orientation. Move backward or forward by clicking and dragging
left or right.
 Orbit.
Tour building Wheel
The Tour Building Wheel is used to navigate a building or a full model.

 Forward. Adjusts the distance between the current point of view and the defined pivot point of the
model. Clicking once moves forward half the distance as far as the object that was clicked.
 Look. Swivels the current view.
 Rewind. Restores the most recent view. Move backward or forward by clicking and dragging left or right.
 Up/Down Tool. Slides the current view of a model along the Z axis of the model.
Full Navigation Wheel
The Full Navigation Wheel contains tools used for both viewing an object and navigating a full model.

 Zoom. Adjusts the magnification of the current view.
Rewind. Restores the most recent view. Move backward or forward by clicking and dragging left or right.
 Pan. Repositions the current view by panning.
 Orbit. Rotates the current view around a fixed pivot point.
 Center. Specifies a point on a model to adjust the centre of the current view or change the target point
2D Navigation Wheel
cess basic 2D navigation tools.

used for some of the navigation tools.
 Walk. Simulates walking through a model.
 Look. Swivels the current view.
The 2D Navigation Wheel provides to ac

 Pan. Repositions the current view by panning.
the current view.
Move backward or forward by clicking and dragging
 Zoom. Adjusts the magnification of
 Rewind. Restores the most recent view orientation.
left or right.

Selecting Items
Items may be selected by clicking on screen with the Select tool from the Quick Access Toolbar or Home
Ribbon > Select & Search Panel > Select button or by selecting entries in the Selection Tree window, accessed
from the Home Ribbon > Select & Search Panel > Selection Tree button.

Viewing Item Properties
The properties of Selected Items are viewed in the Properties Window, accessed from Home Ribbon > Display
Panel > Properties button.

Using Saved Viewpoints
Viewpoints and Viewpoint Animations that have been saved with the published Navisworks model are listed in
the Saved Viewpoints Window, accessed from Viewpoint Ribbon > Save, Load & Playback Panel > Launch button

Click on a view to switch the display to that view.

Controlling the Screen Layout
The View tab of the Navisworks ToolRibbon provides functions to control the screen layout.
The Workspace panel is shown below with the Windows button selected, listing all of the supplementary
windows that may be displayed in Navisworks. These windows are displayed automatically when the
corresponding Navisworks function is activated, but may be also turned on or off here.
The Navigation Bar and View Cube buttons toggle the display of the Navigation Bar and ViewCube controls
respectively. Similarly, the HUD button enables the XYZ axes and position readout windows to be displayed, as
shown in the bottom left corner of the window, below.
Save Workspace and Load Workspace may be used to save and reload configured Workspaces (screen layouts).

Navisworks ToolRibbons
Home Ribbon

Panel Function
Project Control the whole scene
Select & Search Select items and saved selections in the scene
Visibility Show and hide items of model geometry
Display Show and hide information including properties and links
Tools Launch TimeLiner Playback tool

Viewpoint Ribbon

Panel Function
Save, Load & Playback Load and playback Saved Viewpoints and Viewpoint Animations
Camera Apply settings to the camera
Navigate Navigate the model
Render Style Control lighting and real‐time rendering settings

Review Ribbon

Panel Function
Measure Measure distances and angles
Comments View comments

View Ribbon

Panel Function
Navigation Aids Toggle navigation aids
Scene View Control the scene view window
Workspace Control window layout and workspace settings

Animation Ribbon

Panel Function
Playback Control the playback of viewpoint and object animations
Script Enable scripts

Output Ribbon

Panel Function
Print Print and preview and set print settings
Send Email the current model

Item Tools Ribbon

Note: this ribbon is only displayed when an item is selected in the model.
Panel Function
Hold Hold the selected Items
Look At Focus and zoom the current view onto the selected items
Visibility Control the visibility of the selected items
Transform Reset the position, rotation and scale of selected items back to their original values
Appearance Reset the colour and transparency of the selected items back to their original values
Links Reset the links on the selected items back to their original values

Context Menus
Scene Menu
Right click on a blank area of the screen to display the Scene Menu:

Select Menu
Right click on an item in the current view to display the Select Menu:

Viewpoint Menu
The Viewpoint Menu is a submenu of the Scene and Select menus:

Editing Global Options
The Options editor is activated in several ways:
 Application Button > Options button
 Scene Menu > Global Options…
 F12 key

Navisworks freedom quick_reference

More Related Content

What's hot (20)

Similar to Navisworks freedom quick_reference (20)

Recently uploaded (20)

Navisworks freedom quick_reference