Risci robotics viirtual learning environment user manual2
- 1. ROBOTICS Virtual Learning Environment USERMANUAL rizal national science high school
- 2. 1 Visit the website: rnshsutakberde.wixsite.com/roboticsvle 2 Click on the Get Started button to begin. 3 Log-in using your google account by clicking the Log in with Google button. If you don’t have a google account, you can log-in by clicking the Log-in with E-mail button. Signing up
- 3. 4 After logging-in, you’ll be directed to the pre-test page. Before continuing, fill-out the necessary information given below: E-mail address (e.g. juandelacruz@ gmail.com) Compelete Name (e.g. Juan Dela Cruz) Grade and Section (e.g. 10-Generosity) These information are needed to record your scores in the quizzes, exams, and practicums. Getting started Click the next button when you’re done.
- 4. Pre-test 5 Afterwards, you’ll be brought to the actual pre-test. You must answer each item and you are not allowed to skip a question. 6 Once an item was answered, click on the Next button. Continue this procedure until you reach the last item. 7 When done answering the last item, click on the Submit button.
- 5. 8 Upon submission, you can see your result by clicking the View Score button. 9 Click on the Lessons button to proceed to the content of the Virtual Learning Environment in Robotics. Content Here is the lessons page. It contains 17 main topics that you will encounter through your virtual learning experience. 10 To start, click the Lesson 1 icon. You will again be delivered to a pre-test page but only for Lesson 1. Fill-out the required information, and repeat the steps 4-8 when answering.
- 6. 11 After answering the test, click on the Lesson Proper button to proceed to the discussion of the lesson. Features Here is the Lesson 1 (Serial Print) Page. In this page, you will see the following: Content/Introduction Discussion Example Code
- 7. 12 To make your learning experience more exciting, click on the simulation button. 13 The Simulation page. In here, you will get to see a video of a step-by- step procedure on how to perform and create the expected product of the lesson. 14 Click on the Simulate button to begin the simulation. 15 Click the Start Simulation button.
- 8. 16 Click the Code button to see the code used in the simulation. 17 Select the Serial Monitor button to see if the simulation worked. 18 To access more of its interactive features, go back and click the Webinar button. 19 Once you’re in the page, register as a guest by clicking the Guest icon.
- 9. 20 Type your username. Any friendly username will do. Click the Log In button subsequently. 21 At this point, you can see whoever’s online among your friends who use the VLE. Through this, you can communicate with them and ask for help or guidance about the lesson. 22 Aside from pure text, you can also send attachments like pictures and videos by clicking the paperclip-like button. 23 To broaden your experience, go back to the Lesson Page and click the Forum button.
- 10. 24 In this part, you may share your stories, ideas and more. To do this, click the Create New Post button. 25 Make a title for your post, and then share your thoughts. Click on the Publish button. You can wait to see if the teacher or your schoolmates had reacted and replied to it. 26 After visiting these features, go back to the Lesson Page and click on the Quiz button to assess how much you have learned in this part. 27 Similar to the pre- test page, fill-out the necessary information needed by the post-test and answer, then answer the exam.
- 11. 28 Afterwards, you may also submit your outputs or videos by clicking the Submit Outputs button. 29 Upon submission, you may now proceed to the next lessons. The same procedure applies to the remaining topics. 30 At the last part of the lesson, click the post-test and you need to answer it. The same procedure applies with the previous pre-tests and post-tests.
- 12. 31 For STEM teachers and IT Experts, you may give your feedback about the Virtual Learning Environment in Robotics by clicking the Rate Us button in the menu bar. 32 To approach the creators, click the Contact button. 33 To know the sources of the lessons, go to the references page by clicking the Reference button. Lastly, enjoy and explore the website by yourself.