Understand PMBoK 4th

Understand the
PMBOK Guide
4th edition
Prepared by:

Amr Miqdadi,MCSE,MCTS,PMP
info@pmlead.net
http://www.pmlead.net


PMI, what is it?
PMI (Project Management Institute) provides practitioners and organizations with
management standards that describe good practices, globally recognized credentials that
certify project management expertise, and resources for professional development, networking
and community.

What is Project Management (PM)?
Project Management is the application of knowledge, skills, tools, and techniques to project
activities in order to meet needed project's requirements. This application of knowledge requires
effective management of appropriate processes and procedures, which means that we need a
process / processes to carry out a certain project. According PMI, any project should be carried
out by using 5 process groups.

PMBok Guide
In order to understand PMBOK and for a better studying approach, you need to understand
how it is organized and formulated. According PMI, “the Project Management Body of
Knowledge (BMBOK) Guide is a recognized standard for the project management profession; a
standard is a formal document that describes established norms, methods, processes, and
practices”. Through looking into the PMBOK Guide 4th edition, it is recognized that the book's
content is organized under three main categories:
 Three sections containing 12 chapters
 Seven appendices
 Glossary

The first section contains the first and the second chapters and focuses on “The Project
Management Framework”, while the second section consists of the third chapter that covers
“The Standards for Project Management ". The third section of the PMBok, which is considered
as a main core of the book starts with the fourth chapter and ends by the twelfth, this section
focuses on the project management knowledge areas where each chapter explains in details
one knowledge area.

For a successful understanding for the book, you have to read section 1 and 2 carefully as you
will learn what does the project management mean, what makes a project, and how do we
establish; guide and close a project. It is worth noting that you may find the second section to
be a bit confusing; however, you don’t need to worry as the more you go ahead with the book, a
clearer understanding you will get. It is well known and as previously mentioned, each project
consists of the following five main project process groups: Initiating, Planning, Executing,
Monitoring and Controlling, and Closing


Initiating means kicking off the project and the start point. The second process is the planning
where we (project managers) take our time in thinking and putting on papers how are we
going to achieve our goal. Following planning, we start the implementation (Executing) that
refers to implementing what we have planned, in parallel with implementation of the project,
we need to be so careful and fully following up on the project to ensure that our project is on
the right track, which is known as (monitoring and controlling). Finally, by the time the
project achieved its objectives, it comes to an end where we close the project 

The third section of the guide, which is the heart of PMbok and project management focuses
on explaining how we are going to manage and execute our project in each process group. For
example, we need to identify what we need to do in order to implement the initiation process
group to carry out this process successfully. This identification is known to be Knowledge
Areas, which consist of main 9 knowledge areas, and each of those areas includes a number of
activities.

It is a bit confusing here as the PMBok uses the term processes for both the 5 process groups
(initiating, planning…) and for the activities that make each knowledge Area. To that end and
for a better and clearer understanding, it is recommended that you refer to the 5 process
groups (initiating, planning…) as the five Project Management process groups, while refer to
the knowledge areas activities as Processes. The 9 Knowledge Areas, which contain 42
processes and cover an important part of the project are the main tools to implement the five
process groups are. These areas are:
1. Project Integration Management
2. Project Scope Management
3. Project Time Management
4. Project Cost Management
5. Project Quality Management
6. Project Human Resource Management
7. Project Communications Management
8. Project Risk Management
9. Project Procurement Management


The Project Life Cycle:
According to PMBok, the Project life cycle is a collection of generally sequential ( and
sometimes overlapping) project phases and it defines the beginning, the end, the activities and
the deliverables of the project. As every project is unique then every project has its own project
life cycle sometimes it may consist of one phase or many phases that depend on the nature of
the project.

What you have to understand that the 5 Project Management Processes Groups (Initiating,
Planning, Executing, Monitoring and Controlling, and Closing) exist within every project phase.
In a simple way you initiate, plan, execute, control and monitor then close each phase.

Do not get confused , it is so simple: 5 main groups (initiating ,planning, executing,…) and 9
knowledge areas contains 42 processes. Each process can exist in one or more of the 5 main
groups. The 42 processes need input that can be used by some tool to generate output.

Here is an example: let's say we want to close a project, this is our process group number1
Here there are 2 knowledge areas should be included in(Project Integration Management and
Project Procurement Management). From Project Integration Management, we have to use the
close project or phase process (which is one of the 42 knowledge areas processes we talked
about) and from the project procurement management, we need the close procurement
process (which is another process of the 42 knowledge areas processes we talked about). Each
one of the 42 processes has its own input tools and techniques and output and it is normal that
one of the outputs of one process becomes an input for another processes. The inputs are
usually documents, information, procedures, policies, supporting detail, etc.

The tools and techniques are the project management methodologies and systems, such as
network diagramming, earned value analysis, PERT, estimating tools, etc. As a result of
applying tools and techniques, an output is produced, in pother words, outputs are deliverables
or tangible results from each major process.

Do not forget that project management process groups are interactive and interrelated,
which means you may need to revisit the planning process while executing process or keep
revisiting the monitoring and controlling during planning process. Finally, each knowledge area
process has its inputs; tools; techniques, and outputs. In other simple words, you have an input
and you implement tool or technique on it towards producing an output. There are many
outputs from one knowledge area that become an input for another knowledge area.


Visit PMLead.net and get your free copy of :
•The Short Guide To Becoming A PMP
•PMBoK Introduction-1
•PMBoK Introduction-2
•The 9 knowledge Areas and the 42 Processes
•PMP Formulas
•Code of Ethics and Professional Conduct
•PMP Exam (Points to remember) - 1
•PMP Exam (Points to remember) - 2
•3 days free PMP exam simulator
•All in One...PMBok summary sheet
•All Processes...summary sheet

Click here to get access to the best PMP exam preparation tools

Register to PMLEAD newsletter to receive PMP exam tips, tools and special
offers

AND
Do not hesitate to contact me any time at info@pmlead.net if you have any
question.

For your success
Amr Miqdadi


Understand PMBoK 4th

More Related Content

What's hot (19)

Viewers also liked (11)

Similar to Understand PMBoK 4th (20)

Recently uploaded (20)

Understand PMBoK 4th