Manu’s Employee Estimating Device

INTERNATIONAL JOURNAL FOR TRENDS IN ENGINEERING & TECHNOLOGY
VOLUME 5 ISSUE 2 – MAY 2015 - ISSN: 2349 - 9303
12
Manu’s Employee Estimating Device
MANU STEPHEN
III Year Ece Department,
Sri Krishna College Of Engineering And Technology,
EMAIL: manustephen510@gmail.com
Abstract- In the present era of computerization, computation has become a part and parcel of our technological life. Numerous methods have
been employed for counting purposes. MANU’S EMPLOYEE ESTIMATING DEVICE, is one of the counting device, which is used to count
the number of persons present in an hall or a company. The estimating device was made by using LDR, IC CD4026 and common cathode
seven segment display. It works on the principle that when the light falling on an LDR is interrupted the resistance increases which provides a
clock pulse to IC CD4026. CD4026 IC is used in the circuit to drive the seven segment display. At this occurrence, LED stops glowing to
indicate that someone is entering or exiting the hall. The interrupts are counted and then it is indicated in the seven segment display. The
main advantages of this device are low cost, less complexity and efficient performance.
Index Terms- estimating device, interrupts, efficiency, small-scale industries, counter.
——————————  ——————————
1. INTRODUCTION
A counter is a device which is used to store the number of times
a particular event or process occurred according to a clock signal
that is applied to the counter. A people counter, is an example of a
counter that is used to measure the number and direction of
people travelling through a certain passage or entrance path in a
unit time.
There are many technologies used in people counting devices.
Some of them are using infrared beams, computer vision, thermal
imaging and pressure-sensitive mats.
There are many applications for people’s counter .Some of them
are: The professionals, who are working in shopping malls, rely
on visitor statistics to calculate their marketing. It offers a
relatively accurate data. In non-profit organizations, like libraries
and museums ,where there are no tickets counting of clients are
either automated or the staff keeps a record of it.
MANU’S EMPLOYEE ESTIMATING DEVICE is a type of
people counter that is used at the entrance of a building so that the
total number of employees can be recorded.
2. OBJECTIVE
There are many technologies and devices to count the number of
persons that are entering or exiting a room like, using IR rays,
microcontrollers etc. Some are efficient but most of them are
costly, complex in design and needed to be programmed. So our
approach was to create simple , low cost, non programmable and
efficient counter, which was our MANU’S EED.
3. PRINCIPLE USED
Fig. 1. Representation of a photoresistor.
A light dependent resistor is also known as a photoresistor or a
photocell[1]. It is a light controlled device in which the resistance
decreases with increasing light intensity. It exhibits photoconductivity.
In the absence of light, resistance increases. The LDR is made of a
high resistance semiconductor in which during dark time it exhibits
high resistance ,while in the light it has low resistance.
4. CIRCUIT AND COMPONENTS
The circuit consists of two IC CD 4026, BC 547 npn transistor, 5
mm LED, common cathode seven segment display,1 kilo-ohm
resistor,10 kilo-ohm resistor , 100 ohm resistor ,4.7 kilo-ohm
resistor , Light dependent resistor (LDR),power supply,connecting
wires and push-to-on switch (S1). The two IC’s are synchronized
to get the required value.

13
Fig. 2. Pin Configuration of a seven segment
display.
Fig. 3 . Circuit Diagram of MANU’S EED
5. WORKING
The main component in the circuit is a LDR. LDR is used as a
sensor.
Fig. 4. The device after giving connection.
Fig 5. The reading noted on the device after 66th
interruption of
the LDR.
Fig. 6. The device having the count 69.
Fig. 7. Interrupting the LDR, which is having a count 69.

14
Fig. 8. During interruption the led glows off.
When the intensity of light that is falling on LDR increases the
resistance of it decreases to few milli ohms and in dark or in the
absence of light the resistance of LDR increases to mega –ohms.
When a person is entering or exiting a path or a room or a hall in
which the circuit is placed, the amount of light falling on the LDR
decreases and the shadow of the person falls on the LDR[2]. It
provides a clock pulse to pin 1 of the IC through transistor BC
547. The LED is connected parallel to the LDR. When 6V power
supply is applied to the LED ,it glows. When the person is
entering ,the LED stops glowing momentarily, indicating that
someone is passing through the entrance.
The IC CD 4026 is activated by the LDR. The IC comprises of a
Johnson decade counter that counts the number of persons
entering a hall and an output decoder that converts the code from
Johnson counter into a seven segment decode output, which is
used to drive the seven segment display. On each clock pulse
received by the IC the count on seven segment display is
incremented by 1.
When the count on the first seven segment display reaches 9 one
cycle of operation finishes and the pin 5 of IC 1 becomes high
which is connected in cascade to pin 1 of IC-2, which acts as a
clock pulse to IC-2. On the next clock, the counter of IC2 is
incremented by one and the operation cycle of IC 1 repeats again
and when its value reaches 9, the counter of IC2 is incremented
by 1.
The counter-1 shows the unit’s digit and counter-2 shows the
ten’s digit. The circuit can be used to count any number of
employees by adding corresponding number of IC’s and seven
segment display and connecting pin-5 of each IC to pin-1 of next
IC. Pin-15 of all the IC’s are connected to ground through a 4.7
kilo-ohm resistor. The pin-3 and pin-8 of the displays are
connected to ground. The reset switch is used to reset the displays
to 0 when required.
The Johnson counter used in the circuit, is also known as a switch
tail ring counter or a twisted-ring counter[3] . It is a modified
ring counter, where the output from the last flip-flop is inverted
and fed back as input to the first flip-flop. Johnson’s counter can
be implemented using D- or JK-type flip-flops.
6. 6. PRESENT TECHNOLOGIES USED
Some of the common people- counting systems used nowadays are :
A hand- held Tally counter is used for people counting purpose[6].
One press is given for each person. To reset the counter to 0 a knob
in the device is used.
In another type of technology single horizontal or vertical infrared
beams are used across an entrance and it is linked to an LCD or a PC,
which is kept at the side of the doorway. When the beam is broken
the count is made. Its accuracy depends on the width of the entrance
and and the amount of traffic. The Disadvantages of this technology
are: the sensors used are limited to non-directional counts, it can’t
differentiate when people walk side-by-side,it can’t be used for high
volume of traffic, it gets blocked when a person stands near the
entrance and also it is inefficient in direct sunlight.
Computer vision systems use a television or IP camera to send signal
to a computer. Some of the camera have built-in technologies to
process the image directly[4]. Its accuracy depends on the systems
used and their installations. Its disadvantages are: high cost, lower
lifetime, high power consumption, and less accurate.
In Thermal imaging systems array sensors are used to detect heat
sources. They are implemented using embedded technology and are
mounted overhead. They have high accuracy. They are susceptible to
external weather condition. Its Disadvantages are : higher cost, lower
field of view, susceptible to external weather conditions and cannot
be used for ceiling height below 2.2 metre.
Artificial intelligence system uses multiple IR transmitters and
receivers[5]. It creates a count zone. When a person passes through
this zone a pattern is created. The onboard processor takes a decision
based on this pattern. This system acts like a human brain. It gives
count per direction.
Fig. 9. AI using Pattern Recognition Technology
(SRT).
The disadvantages of artificial intelligence system are: complex
design, cannot be used for high volume of traffic and has high
potential to be blocked by people standing in an entrance.
3D camera technology is another technology ,which is used for
acquiring a 3D image. It uses 2 video cameras to produce human
3D vision. The accuracy depends on image processing and 3D
camera technology used. The sensors used are Time-of-flight
(TOF) sensors that use IR light to obtain the 3D image of the
scene and Structured light sensors that use projected light pattern

15
to obtain the 3D image. Its disadvantages are: high cost and
design is complex.
7. WHY TO USE MANU’S EED?
It is of less cost, can be used to count in a large scale, design is
simple ,best solution in small scale industries, can be used for a
long term and has sufficient efficiency.
It can be used to count large numbers by synchronizing sufficient
number of IC CD 4026 and seven segment display.
It has less power consumption, the sensor used is simple(LDR)
and has larger lifetime.
The cost of each counting devices are provided in optics
planet website on 2 Feb,2015 as :
Tab. 1. The cost of various counting devices.
Its cost efficiency comparing to other present counting devices
are shown through a pie-chart :
Graph. 1. Graph plotted according to the data provided in optics
planet website on 2 Feb,2015 comparing the cost of
various counting devices. The cost of MANU’S EED
is very less (near to 0%) comparing to other devices.
8. DRAWBACK
It is a light dependent device. The device doesn’t provide high
accuracy. Its working is satisfactory. No electronic system can be
100% accurate and therefore must not be entirely relied upon for the
purposes of health & safety.
9. APPLICATIONS
The MANU’S Employee Estimating Device can be used in future for
various applications. They can be used in the public transport sector
to record the passengers in it or it can be used in stores and at trade
fairs to record the flow of visitors.
For safety purposes, public buildings are often rated to hold a certain
number of people. This device can be used to ensure that the building
is below the safe level of occupancy. In retail stores the device can be
used as a form of intelligence-gathering. It is necessary in the retail
environment to calculate the conversion rate, i.e., the percentage of a
store's visitors that makes purchases. This may serve as a key
performance indicator of a store's performance and is superior to
traditional methods, which only take into account sales data. It can
also be used in the process of optimizing staff shifts. Staff
requirements are directly related to density of visitors arriving and
services such as cleaning and maintenance are typically done when
visitors are at its lowest. It may also be used in queue management
and customer tracking.
10. IMPACT OF MANU’S EED
An efficient counting device with simple design and that can be
used comfortably by small scale industries and has less drawbacks
compared to other present technologies used. It is cost efficient.
Implementing it in industries can help to count the number of
employees present during a day and to keep their records.
11. FUTURE PLANS
The works are done to construct a device that can be working in
synchronous with this device to be kept at the exit gate of an
industry so that number of employees entering and exiting can be
counted and recorded for security purposes.
12. CONCLUSION
Thus a people counting device to count the number of employees
present on a given day is constructed using simple components.
The sensor used is an LDR. It is very much affordable even to
small-scale industries. The implementation cost is very small
compared to present technologies. This circuit is very useful as it
does not require any knowledge of programming of
microcontrollers. Moreover, it has a flexibility of counting large
amount by expanding the circuit.
Computer
Vision
System
21%
Thermal
Imaging
System
30%
Tally
Counter
1%
IR
Technolog
y
7%
3D
Camera
Technolog
y
41%
MANU'S
Emoloyee
Estimating
Device
0%
COST(%)
Devi
ces
Comp
uter
Vision
Syste
m
Therm
al
Imagin
g
Syste
m
Tally
Count
er
IR
Techno
logy
3D
Camera
Techno
logy
MAN
U’s
EED
Cost(
in
Rupe
es)
27907
2.97
40288
4.85
9831.1
347
92362.
67
553865
.87
300

16
13. REFERENCES
[1] Staymates. M.E. , Grandner, J. and Verkouteren. J.R.,
―Pressure-Sensitive Sampling Wands for Homeland Security
Applications,‖ Sensors Journal, IEEE , Volume.13 , no. 12, pp.
4844 – 4850, July. 2013
[2] Da Silva Cascalheira.M. , Pinho.P. , Teixeira. D. and De
Carvalho. N.B., ―Indoor guidance system for the blind and the
visually impaired,‖ Microwaves, Antennas & Propagation, IET ,
Volume.6 , no. 10 , pp. 1149 – 1157, July . 2012
[3] Zhou Bin and Wu Xinchun, ―A Low Power Test-per-Clock
BIST Scheme through Selectively Activating Multi Two-Bit
TRCs,‖ Instrumentation and Measurement, Computer,
Communication and Control (IMCCC), pp. 505 – 509, Sept.
2014
[4] Agah. A., Walker. R. and Ziemer. R., ―A mobile camera
robotic system controlled via a head mounted display for
telepresence," Systems, Man, and Cybernetics, vol.4, pp.3526 –
3531, Oct .1998
[5] Hamidoun. K. ,Elassali. R. , El Hillali. Y. , Elbaamrani.K. ,
Rivenq-Menhaj. A. and Boukour, F., ―Multi-user interferences
in ultra wide band system based on Modified Gegenbauer
functions and M-OAM modulation,‖ Industrial Engineering and
Systems Management (IESM), pp.532, Oct. 2013
[6] Mikov. A. , Moschevikin.A. , Fedorov.A. and Sikora. A.,―A
localization system using inertial measurement units from
wireless commercial hand-held devices,‖ Indoor Positioning and
Indoor Navigation (IPIN), pp.1 – 7, Oct. 2013

Manu’s Employee Estimating Device

More Related Content

What's hot (20)

Viewers also liked (16)

Similar to Manu’s Employee Estimating Device (20)

More from IJTET Journal (20)

Recently uploaded (20)

Manu’s Employee Estimating Device