Sine Pulse Width Modulation Inverter
Download as PPTX, PDF3 likes2,884 views
This document summarizes a MATLAB simulation of an SPWM inverter using bipolar and unipolar switching strategies. The objective is to analyze the output voltage using FFT. It describes how the SPWM technique works by comparing a reference sine wave to a high frequency triangular carrier wave to generate PWM signals. Circuit diagrams and output waveforms are shown for both bipolar and unipolar inverters, and FFT analysis is performed. The conclusion is that a unipolar inverter with a filter provides a more sinusoidal output waveform than a bipolar inverter.
Sine Pulse Width Modulation Inverter
- 1. MATLAB SIMULATION OF SPWM Inverter Using Bipolar and Unipolar Switching Strategy Aditya Parmar B.Tech Electrical Engineering Charotar University Of Science & Technology Changa - Anand
- 2. OBJECTIVE: To analyze the output voltage of a SPWM inverter using FFT. ■ In most of the inverter applications, the magnitude of the output AC voltage and the input DC voltage varies continuously. ■ This requires continous variation of the control pulse width inorder to achieve the desired output voltage waveform. ■ In this method a reference signal is compared with a high frequency triangular wave to generate PWM signal. ■ If the reference signal is a sine wave, the modulation is called Sine wave pulse width modulation(SPWM).
- 3. ■ The SPWM is realized by comparing a sine wave reference signal(Vr) with a high frequency triangular or sawtooth wave carrier signal(Vc). ■ The ratio Vr/Vc is called the modulation index and it determines the harmonic content in the inverter output voltage wave form. ■ The frequency of the reference signal determines the inverter output frequency and its peak magnitude determines the modulation index which inturn determines the RMS output voltage. ■ When the reference signal is compared with the carrier signal, their intersection determines the switching instants of the inverter switches.
- 4. CIRCUIT DIAGRAM OF BIPOLAR SWITCHING
- 7. FFT Analysis
- 8. CIRCUIT DIAGRAM OF BIPOLAR SWITCHING
- 10. FFT Analysis
- 11. CONCLUSION ■ A SPWM inverter was simulated and FFT analysis was made in Matlab for the 2 different switching strategies. It was found that unipolar inverter with a filter circuit will give better sinusoidal output waveform compared to bipolar inverter.
- 12. THANK YOU For Matlab Simulation File Download Following Files: http://downloads.ziddu.com/download/25104164/unipolar_SPWM_Copy.pdf.html http://downloads.ziddu.com/download/25104163/Bipolar_SPWM_Copy.pdf.html http://downloads.ziddu.com/download/25104161/Instruction.txt.html