Iai rcp2 rca_sra_specsheet

ROBO Cylinder RCP2/RCA-SRA
Short Length Type
Sold & Serviced By:
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com

We have reduced the length
by a maximum of 45%
compared to the existing model
11 Significantly shortened length
We have shortened the length of the
actuator by up to 129mm compared to
the current equivalent model. (*1)
Customers can now use the actuator in
narrow locations where there is very
little space.
(*1) Compared to RCA−RA3C
50
50
50
50
Length Comparison with Existing Model
Compared to RCA-RA3C Compared to RCA-RA3R
(　　　)
(　　　)
(　　　)
(　　　)
RCA-RA3C
50 stroke
RCA-SRA4R
50 stroke
RCA−RA3R
50 stroke
RCA−SRA4R
50 stroke
Shortened by 129mm Shortened by 63.5mm
Select pulse force lowering type during A selected applied or required. a selected, single 3 installed.
There surfaces We optional flanges (bottom, 1
Sold Serviced By:
ELECTROMATE
www.electromate.com

Example of use
Pulse motor: RCP2 Series
Low-speed raising and lowering operations,
Usage Usage
Single guide
Installed on left
such as clamping and press fitting
Single guide
Installed on bottom
Servo Motor: RCA Series
Positioning during high-speed transfer
Single guide
Installed on right
Double-guide
Flange
(Installed on front)
Flange
(Installed on rear)
Foot bracket
(Installed on bottom)
Foot bracket
(Installed on side)
Used to raise and lower
the stopper Used with a clamp
22 Choose between a pulse motor or servo motor
Select between 2 types of motors: a
pulse motor type suitable for push
force and low-speed raising and
lowering operations, or a servo motor
type effective for stable transportation
during high-speed operations
33 A guide type can be selected
A guide type can be
selected if a load is
applied to the end of a rod,
or if a straight motion is
required. A single guide or
a double guide can be
selected, and for the
single guide, there are
3 directions that it can be
installed.
44 Flexible Installation method
There are 5 installation
surfaces on the actuator.
We have also prepared
optional front and rear
flanges and foot brackets
(bottom, side).
2
Sold Serviced By:
ELECTROMATE
www.electromate.com

Product Specification List Model description
Product Specification List Model description
Maximum load capacity (*)
I 35P P1
Maximum load capacity (*)
Series Type Encoder type Motor type Ball screw lead Stroke Compatible Controllers Cable length Option
SRA4R
SRGS4R
SRGD4R
I Incremental
35P 35P pulse motor, 35 size
5 5mm
2.5 2.5mm
PCON/RPCON
PSEL
B Brake (*)
FL Flange bracket (front)
FLR Flange bracket (rear)
FT Foot bracket
FT2 Foot bracket (Mounted on right)
FT4 Foot bracket (Mounted on left)
GS2 Single guide, mounted on right
GS3 Single guide, mounted on bottom
GS4 Single guide, mounted on left
NM Reversed-home specification
P1
N No cable
P 1m
S 3m
M 5m
X Length Designation
Series Name Motor type Type Stroke
Ball screw
lead Maximum speed Rated thrust Maximum
Horizontal Vertical pushing force
RCP2
RCA
Pulse motor
35
5
2.5
5
2.5
5
2.5
5
2.5
5
2.5
5
2.5
250
125
250
125
250
125
250
125
250
125
250
125
—
—
—
—
—
—
41
81
41
81
41
81
10 to 25
30 to 35
9 to 24
30 to 35
9 to 24
30 to 35
9
18
9
18
9
18
2 to 9
3 to 15
1 to 8
3 to 15
1 to 8
3 to 15
3
6.5
2
5.5
2
5.5
90
170
90
170
90
170
—
—
—
—
—
—
20 to 200mm
20 to 100 are
set every 10mm.
100 to 200 are
set every 50mm.
Standard
(no guide)
With
single guide
With
double guide
Standard
(no guide)
With
single guide
With
double guide
Servo Motor
20W
Reversing Type
Short Rod Type
Reversing Type
Short Rod Type
with Single Guide
Reversing Type
Short Rod Type
with Double Guide
20 20mm
to to
200 200mm
P1
　　　20 to 100 are set every 10mm.
100 to 200 are set every 50mm.
*The brake specification can only be used with a 70mm or higher stroke.
I 20 A 1
I 20 A 1
SRA4R
SRGS4R
SRGD4R
I Incremental
20 Servo Motor 20W
5 5mm
2.5 2.5mm
ACON/RACON
A1
　 ASEL
N No cable
P 1m
S 3m
M 5m
RCP2
RCA
Reversing Type
Short Rod Type
Reversing Type
Short Rod Type
with Single Guide
Reversing Type
Short Rod Type
with Double Guide
B Brake (*)
FT Foot bracket
A1
20 20mm
to to
200 200mm
Pulse motor type
Servo Motor Type
I 35P P1
SRA4R
SRGS4R
SRGD4R
I Incremental
35P 35P pulse motor, 35 size
5 5mm
2.5 2.5mm
PCON/RPCON
PSEL
B Brake (*)
FT Foot bracket
N No cable
P 1m
S 3m
M 5m
Series Name Motor type Type Stroke
Ball screw
lead Maximum speed Rated thrust Maximum
Horizontal Vertical pushing force
RCP2
RCA
Pulse motor
35
5
2.5
5
2.5
5
2.5
5
2.5
5
2.5
5
2.5
250
125
250
125
250
125
250
125
250
125
250
125
—
—
—
—
—
—
41
81
41
81
41
81
10 to 25
30 to 35
9 to 24
30 to 35
9 to 24
30 to 35
9
18
9
18
9
18
2 to 9
3 to 15
1 to 8
3 to 15
1 to 8
3 to 15
3
6.5
2
5.5
2
5.5
90
170
90
170
90
170
—
—
—
—
—
—
20 to 200mm
20 to 100 are
set every 10mm.
100 to 200 are
set every 50mm.
Standard
(no guide)
With
single guide
With
double guide
Standard
(no guide)
With
single guide
With
double guide
Servo Motor
20W
Reversing Type
Short Rod Type
Reversing Type
Short Rod Type
with Single Guide
Reversing Type
Short Rod Type
with Double Guide
20 20mm
to to
200 200mm
SRA4R
SRGS4R
SRGD4R
I Incremental
20 Servo Motor 20W
5 5mm
2.5 2.5mm
ACON/RACON
ASEL
N No cable
P 1m
S 3m
M 5m
RCP2
RCA
Reversing Type
Short Rod Type
Reversing Type
Short Rod Type
with Single Guide
Reversing Type
Short Rod Type
with Double Guide
B Brake (*)
FT Foot bracket
20 20mm
to to
200 200mm
Pulse motor type
Servo Motor Type
3
Sold Serviced By:
ELECTROMATE
www.electromate.com

4
PLC
Actuator
No. Ti t le Type
I/O Cable
Actuator
Controller
connector
between cables
Positioner Type
Teaching Pendant
Positioner Type
PC software
Program Type
Teaching Pendant
Program Type
PC Software
DC24V
Power supply
simple absolute
unit
Field Network
DeviceNet
CC-Link
ProfiBus
Teaching Pendant
Model Remarks See page
CB-PAC-PIO020
CB-PACY-PIO020
CB-PACPU-PIO020
CB-PCS-MPA
CB-ACS-MPA
CON-T
RCM-E
RCM-P
RCM-101-MW
RCM-101-USB
SEL-T-J
SEL-TD-J
IA-101-X-MW-J
IA-101-X-USB
PS-241
PS-242
PCON-ABU
ACON-ABU
for use with C/CG Type
for use with CY Type
for use with PL/PO type (pulse train)
A motor/encoder integrated cable for use with RCP2 (PCON/RPCON/PSEL)
A motor/encoder integrated cable for use with RCA (ACON/RACON/ASEL)
Standard Teaching Pendant
Simple Teaching Pendant
Data Setting Unit
RS232 Connection Type
USB Connection Type
Standard specification
ANSI compatible specification
RS232 Connection Type
USB Connection Type
100-V input
200-V input
for PCON
for ACON
(*)
(*)
(*)
P19
P19
P22
P22
P22
P22
P22
P22
P22
P22
P22
(*)
(*)
(*)
(*)
Cable length 2m
(fitting for controller)
for both PCON/ACON
Cable lengths 1m/3m/5m
(required option for actuator)
Cable length 5m
for PCON/ACON/ROBONET
Auxillary cable for PC connection
(5m) for PCON/ACON/ROBONET
Cable length 5m
for both PSEL/ASEL
3 position enable switch
for both PSEL/ASEL
Auxillary cable for PC connection
(5m) for both PSEL/ASEL
1
2
3
4
5
6
7
8
9
10
1 2 3
4
5
6
7
8
9
10
Actuator
Controller
connector
between
cables
Controllers
(Positioner type) (Program Type)
PCON/ACON
C/CG type
Teaching Pendant
I/O Cable
PC-compatible software simple absolute unit DC24VPower supply PC-compatible
software
PCON/ACON
CY type
PCON/ACON
PL/PO type
PCON/ACON
SE type
RPCON/RACON
(ROBONET)
PSEL
ASEL
System Configuration
(*)Refer to ROBO Cylinder General Catalog 2008.
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCP2 ROBO Cylinder
RCP2-SRA4R ROBO Cylinder, Short Rod-Type, Actuator Diameter 45mm,
n Model Description RCP2 SRA4R 　 I 　　35P 　　　　　　　　　　　　　P1
n Speed vs. Payload Graph
Since the RCP2 Series uses a pulse motor, the
payload decreases as speed increases. Use the
table below to confirm that there is sufficient
payload at the desired speed.
5: 5mm
2.5: 2.5mm
O I N
Actuator Specification Table
nLeads and Payloads (Note 1) Note that the maximum load capacity decreases as the speed increases. nStroke and Maximum Speed
5 RCP2-SRA4R
Load capacity (kg) Load capacity (kg)
40
35
30
25
40
20
35
15
30
10
25
5
20
15
10
5
0
Horizontal
Horizontal
Lリeーadド 22..55
Lリeーadド 22..55
0 50 100 150 200 250
Speed (mm/s)
300
20
18
16
14
12
20
10
18
8
16
6
14
4
12
2
10
8
6
4
2
0
Lead 2.5
Lead 2.5
0 50 100 150 200 250
Speed (mm/s)
300
Vertical
Lead 5
リード5
リードLead 15
9
3
0
0 50 100 150 200 250
Speed (mm/s)
300
0
0 50 100 150 200 250
Speed (mm/s)
300
Vertical
Lead 5
リード5
リードLead 15
9
3
Maximum payload (Note 1) Maximum pushing
① Price List by Stroke ② Cable Length Price List
③ Option Price List
Pulse Motor, Motor Reversing Specification
* See P3 for model descriptions.
Legend Stroke Cable Length Option ③ ② ① (Unit = mm/s)
(Note 2) Refer to the push force graph on P17.
(Note 3) Every 50mm stroke at over 100mm.
Stroke
Lead
20 to 200
(every 10mm)
250
125
5
2.5
Lead
(mm)
5
2.5
Horizontal (kg)
25
35
Vertical (kg)
force
(N) (Note 2)
Model
9
15
90
170
Stroke
(mm)
RCP2-SRA4R-I-35P-5--P1-- ③ ② ①
RCP2-SRA4R-I-35P-2.5--P1-- ③ ② ①
20 to 200
(every 10mm)
(Note 3)
Type Cable symbol
Standard type
*A built-in motor-encoder cable is standard,
and meets the robot cable specification.
*See P19 for maintenance cables.
Type code
*The brake can be used at 70 stroke or above.
Special length
P (1m)
S (3m)
M (5m)
X06 (6m) – X10 (10m)
X11 (11m) – X15 (15m)
X16 (16m) – X20 (20m)
Actuator Specification
Item Descr ipt ion
Ball screw φ8mm rolled C10
±0.05mm
0.1mm or less
φ22mm
−
0 to 40°C, 85% RH or less (without condensation)
5000km
Drive System
Positioning Repeatability
Backlash
Rod diameter
Non-rotary Rod Precision
Ambient operating temperature, humidity
Service life
Title Option code See page
B
FL
FLR
FT
FT2/FT4
−
→P19
→P19
→P19
→P19
Brake
Flange bracket (front)
Flange bracket (rear)
Foot bracket 1 (mounted on bottom)
Foot brackets 2 (Mounted on right or left side)
35P: Pulse motor
35oSize
I: Incremental
specification
P1: PCON
RPCON
PSEL
N: None
P: 1m
S: 3m
M: 5m
Xoo: Length
designation
Options below
See Pricing Table
20:20mm
to
200:200mm
(10mm pitch setting)
*Every 50mm for strokes over 100mm.
—
—
—
—
①Stroke
(mm)
SRA4R
Encoder type
Incremental
20 to 50
60 to 100
150
200
Series 　Type 　Encoder type 　Motor type 　Lead 　Stroke 　Compatible Controllers 　　Cable length 　　Option
(1) The RCP2 series uses a pulse motor so the load capacity decreases at high speeds. Confirm the
payload at the desired speed in the Speed vs. Payload graph at right.
(2) The payload is the value when operated at 0.3G acceleration (0.2G acceleration in vertical operation
with lead 2.5).
The above values are maximum acceleration.
(3) The horizontal load capacity assumes use of an external guide.Take note that the interlock may get
damaged if external force is applied from any direction other than the moving direction of the rod.
P
T
Notes for
selection
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCP2 ROBO Cylinder
31.5 4.8 4.2
Cable joint
connector (*1)
34
E-M4, depth 10
(Opposite side is same)
B 22
nDimensions and Weight by Stroke (If the unit has a brake, add 0.2kg)
Stroke 20 30 40 50 60 70 80 90 100 150 200
Compatible Controllers
The RCP2 Series actuators can be operated with the following controllers. Select the type that is compatible with your application.
4-M6, depth 12
6 M10×1.25
Title External View Features Maximum number of
Model positioning points Input power Power-supply capacity See page
PCON-CG-35PI-NP-2-0
PCON-CY-35PI-NP-2-0
PCON-PL-35PI-NP-2-0
PCON-PO-35PI-NP-2-0
PCON-SE-35PI-N-0-0
RPCON-35P
PSEL-C-1-35PI-NP-2-0
Positioner
Type
Safety category
compatible
Positioner type
Solenoid valve
type
Pulse series
input type
(Differential line
driver specification)
Pulse series
input type
(Open collector
specification)
Serial
communication
type
Field
network
type(*1)
Program
control type
Up to 512-point
positioning
possible
(*1) In addition to the controller, the field network type also requires a Gateway unit (sold separately).
512 points
DC24V Maximum 2A
Same as solenoid
valve
Controlled
operation enabled
3 points
Differential line
driver compatible
Pulse series
input type
Open collector
compatible
Pulse series
input type
64 points
768 points
Serial
communications
Special Type
Field Network
Dedicated type
(−)
Programmed
operation enabled
Maximum biaxial
operation enabled
1500 points
PCON-C-35PI-NP-2-0
→P20
(19.6)
17
34
34
㪤10×1.25
㱢20
㱢22
㱢32
22 7.5 (2D width area)
4-M6, depth 12
45
95
45 50
34
14
14
22.5
(210)
Secure at least 100
E-M4, depth 10
34
24 C D×50 8
ME SE Home ME( 2)
34
17 C D×50 15
L
A
40.5
3
st
3
Dimensions of provided nut
ST: stroke
SE: stroke end
ME: mechanical end
Dimensions Drawing
(*1) Connect the motor and encoder cable. See P19 for cable details.
(*2) During home return, the slider moves to the mechanical end and then reverses.
Pay attention to prevent contact between the slider and surrounding parts.
* The brake specification does not effect the external dimensions.
However, 70 is the minimum stroke for the brake specification.
(The brake is not compatible at 60 strokes and under.)
RCP2-SRA4R6
L
A
B
C
D
E
Weight (kg)
124.5
84
62
30
0
4
0.83
134.5
94
72
40
0
4
0.89
144.5
104
82
50
0
4
0.96
154.5
114
92
60
0
4
1.02
164.5
124
102
70
0
4
1.08
174.5
134
112
30
1
6
1.14
184.5
144
122
40
1
6
1.21
194.5
154
132
50
1
6
1.27
204.5
164
142
60
1
6
1.33
254.5
214
192
60
2
8
1.64
304.5
264
242
60
3
10
1.95
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCP2 ROBO Cylinder
n Model Description RCP2 SRGS4R 　 I 　　35P 　　　　　　　　　　　　　P1
nSpeed vs. Payload Graph
RCP2-SRGS4R
5: 5mm
2.5: 2.5mm
(1) The RCP2 series uses a pulse motor so the load capacity decreases at high speeds. Confirm
the payload at the desired speed in the Speed vs. Payload graph at right.
(2) The payload is the value when operated at 0.3G acceleration (0.2G acceleration in vertical
O I N
7 RCP2-SRGS4R
40
35
30
25
40
20
35
15
30
10
25
5
20
15
10
5
0
リード2.5
24
リード2.5
24
9
9
Horizontal
Horizontal
Speed (mm/s)
0 50 100 150 200 250 300
20
18
16
14
12
20
10
18
8
16
6
14
4
12
2
10
8
6
4
2
0
Speed (mm/s)
Vertical
Vertical
リード5
3
リード5
リード2.5
リード2.5
15
15
1
1
3
0 50 100 150 200 250 300
Speed (mm/s)
Lead 5
Lead Lead 2.5
Lead 2.5
0
0 50 100 150 200 250 300
0
0 50 100 150 200 250 300
Speed (mm/s)
Lead 5
Lead Lead 2.5
Lead 2.5
ROBO Cylinder, Rod-Type with Short Single Guide, Actuator Diameter 45mm,
Servo Motor, Motor Reversing Specification
operation with lead 2.5).
(3) The horizontal load capacity assumes use of an external guide.See P.18 of the Technical
Reference for the load capacities that can be used with the single guide that is provided.
P
T
Notes for
selection
Stroke
Lead
20 to 200
(every 10mm)
250
125
5
2.5
Lead
(mm)
5
2.5
Horizontal (kg)
24
35
Vertical (kg)
force
(N) (Note 2)
Model
8
15
90
170
Stroke
(mm)
RCP2-SRGS4R-I-35P-5--P1-- ③ ② ①
RCP2-SRGS4R-I-35P-2.5--P1-- ③ ② ①
20 to 200
(every 10mm)
(Note 3)
Type Cable symbol
Standard type
Type code
*Always input the direction the guide should be mounted on the model.
*The guide and foot bracket cannot be used in the same direction.
Special length
P (1m)
S (3m)
M (5m)
X06 (6m) – X10 (10m)
X11 (11m) – X15 (15m)
X16 (16m) – X20 (20m)
Item Descr ipt ion
±0.05mm
0.1mm or less
φ22mm
±0.05 degrees
5000km
Drive System
Backlash
Rod diameter
Service life
B
FLR
FT
FT2/FT4
GS2 to GS4
−
→P19
→P19
→P19
→P8
Brake
Foot brackets 2 (Mounted on right and left sides)
Guide installation direction change
—
—
—
—
①Stroke
(mm)
SRGS4
Encoder type
Incremental
20 to 50
60 to 100
150
200
Series 　Type 　Encoder type 　Motor type 　Lead 　Stroke 　Compatible Controllers 　Cable length 　　Option
35P: Pulse motor
35oSize
I: Incremental
specification
P1: PCON
RPCON
PSEL
N: None
P: 1m
S: 3m
M: 5m
Xoo: Length
designation
Options below
See Pricing Table
20:20mm
to
200:200mm
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCP2 ROBO Cylinder
st 3 (Amount the shaft moves from the ME position on the home side to the home position)
st
17 C D×50 15
34.5 8 A
24 C D×50 8
Dimensions Drawing
0.5 44 50.5
Stroke 20 30 40 50 60 70 80 90 100 150 200
4-M6, depth 12
ST: stroke
SE: stroke end
ME: mechanical end
PCON-CG-35PI-NP-2-0
PCON-CY-35PI-NP-2-0
PCON-PL-35PI-NP-2-0
PCON-PO-35PI-NP-2-0
PCON-SE-35PI-N-0-0
RPCON-35P
Positioner
Type
Safety category
compatible
Positioner type
Solenoid valve
type
Pulse series
input type
(Differential line
Pulse series
input type
(Open collector
specification)
Serial
communication
type
Field
network
type(*1)
Program
control type
Up to 512-point
positioning
possible
512 points
DC24V Maximum 2A
Same as solenoid
valve
Controlled
operation enabled
3 points
Differential line
driver compatible
Pulse series
input type
Open collector
compatible
Pulse series
input type
64 points
768 points
Serial
communications
Special Type
Field Network
Dedicated type
(−)
Programmed
operation enabled
Maximum biaxial
operation enabled
1500 points
PCON-C-35PI-NP-2-0
→P20
34
34
ME SE Home ME䋨 2䋩
5.5
㱢10
2.5 80 8
20 45 15
42.5 st+60 4
3 5 (Amount shaft pulls out at the SE position)
3
E-M4, depth 10
34
6-M5, depth 12
90.5
45.5 45
95
20
7.5 30
22.5
30 30 5
E-M4, depth 10
20 14.5
34
L
B 22
Cable joint
connector (*1)
䋨210䋩
㱢34
Secure at least 100
GS3
Mounted
on bottom
GS4
Mounted
on left
Actuator
GS2
Mounted
on right
(Visual A)
Guide Mounting Direction (see Visual A)
RCP2-SRGS4R 8
L
A
B
C
D
E
Weight (kg)
126.5
84
62
30
0
4
1.2
136.5
94
72
40
0
4
1.27
146.5
104
82
50
0
4
1.34
156.5
114
92
60
0
4
1.41
166.5
124
102
70
0
4
1.48
176.5
134
112
30
1
6
1.54
186.5
144
122
40
1
6
1.61
196.5
154
132
50
1
6
1.68
206.5
164
142
60
1
6
1.75
256.5
214
192
60
2
8
2.09
306.5
264
242
60
3
10
2.43
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCP2 ROBO Cylinder
RCP2-SRGD4R
n Model Description RCP2 　 SRGD4R 　I 　35P 　　　　　　　　　　　　　P1
Series 　　Type 　Encoder type Motor type 　Lead 　Stroke 　　Compatible Controllers 　　Cable length 　　Option
35P: Pulse motor
35oSize
O I N
Title
Brake
nSpeed vs. Payload Graph
9 RCP2-SRGD4R
40
35
30
25
40
20
35
15
30
10
25
5
20
15
10
5
0
リード2.5
24
リード2.5
24
9
9
Horizontal
Horizontal
Speed (mm/s)
0 50 100 150 200 250 300
20
18
16
14
12
20
10
18
8
16
6
14
4
12
2
10
8
6
4
2
0
Speed (mm/s)
Vertical
Vertical
リード5
3
リード5
リード2.5
リード2.5
15
15
1
1
3
0 50 100 150 200 250 300
Speed (mm/s)
Lead 5
Lead Lead 2.5
Lead 2.5
0
0 50 100 150 200 250 300
0
0 50 100 150 200 250 300
Speed (mm/s)
Lead 5
Lead Lead 2.5
Lead 2.5
ROBO Cylinder, Rod-Type with Short Guide, Actuator Diameter 45mm,
Stroke
Lead
20 to 200
(every 10mm)
250
125
5
2.5
Lead
(mm)
5
2.5
Horizontal (kg)
24
35
Vertical (kg)
force
(N) (Note 2)
Model
8
15
90
170
Stroke
(mm)
RCP2-SRGD4R-I-35P-5--P1-- ③ ② ①
RCP2-SRGD4R-I-35P-2.5--P1-- ③ ② ①
20 to 200
(every 10mm)
(Note 3)
Type Cable symbol
Standard type
Type code
*The foot bracket cannot be mounted on the side.
Special length
P (1m)
S (3m)
M (5m)
X06 (6m) – X10 (10m)
X11 (11m) – X15 (15m)
X16 (16m) – X20 (20m)
Item Descr ipt ion
±0.05mm
0.1mm or less
φ22mm
±0.05 degrees
5000km
Drive System
Backlash
Rod diameter
Service life
Option code See page
B
FT
−
→P19
I: Incremental
specification
P1: PCON
RPCON
PSEL
N: None
P: 1m
S: 3m
M: 5m
Xoo: Length
designation
Options below
See Pricing
Table
20:20mm
to
200:200mm
5: 5mm
2.5: 2.5mm
—
—
—
—
①Stroke
(mm)
SRGD4R
Encoder type
Incremental
20 to 50
60 to 100
150
200
(1) The RCP2 series uses a pulse motor so the load capacity decreases at high speeds. Confirm the
payload at the desired speed in the Speed vs. Payload graph at right.
(2) The payload is the value when operated at 0.3G acceleration (0.2G acceleration in vertical operation
with lead 2.5).
(3) The horizontal load capacity assumes use of an external guide.See P.18 of the Technical Reference for
the load capacities that can be used with the double guide that is provided.
P
T
Notes for
selection
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCP2 ROBO Cylinder
17 C D×50 15
20 14.5
34.5 8 A
34
st
0.5 44 50.5
30 30 30
105
126
Stroke 20 30 40 50 60 70 80 90 100 150 200
ST: stroke
SE: stroke end
ME: mechanical end
PCON-CG-35PI-NP-2-0
PCON-CY-35PI-NP-2-0
PCON-PL-35PI-NP-2-0
PCON-PO-35PI-NP-2-0
PCON-SE-35PI-N-0-0
RPCON-35P
Positioner Type
Safety category
compatible
Positioner type
Solenoid valve
type
Pulse series
input type
(Differential line
Pulse series
input type
(Open collector
specification)
Serial
communication
type
Field
network
type(*1)
Program
control type
Up to 512-point
positioning
possible
512 points
DC24V Maximum 2A
Same as solenoid
valve
Controlled
operation enabled
3 points
Differential line
driver compatible
Pulse series
input type
Open collector
compatible
Pulse series
input type
64 points
768 points
Serial
communications
Special Type
Field Network
Dedicated type
(−)
Programmed
operation enabled
Maximum biaxial
operation enabled
1500 points
PCON-C-35PI-NP-2-0
→P20
15.5 7.5
8-M5, depth 12
(for mounting work piece)
34
L
B 22
E-M4, depth 10
24 C D×50 8
㱢34
5.5
㱢10
45 45 7.5 15.5
42.5 st+60 4
3 5 (Amount shaft pulls out at the SE position) st 3 (Amount the shaft moves from the ME position on the home side to the home position)
3
34
4-M6, depth 12
34
4-M5
(for mounting to main unit)
95
34
7.5 30
20
45.5 45 45.5
136
E-M4, depth 10
Cable joint
connector (*1)
䋨210䋩
Secure at least 100
22.5
Dimensions Drawing
RCP2-SRGD4R 10
L
A
B
C
D
E
Weight (kg)
126.5
84
62
30
0
4
1.47
136.5
94
72
40
0
4
1.55
146.5
104
82
50
0
4
1.62
156.5
114
92
60
0
4
1.7
166.5
124
102
70
0
4
1.77
176.5
134
112
30
1
6
1.84
186.5
144
122
40
1
6
1.92
196.5
154
132
50
1
6
1.99
206.5
164
142
60
1
6
2.07
256.5
214
192
60
2
8
2.44
306.5
264
242
60
3
10
2.81
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCA ROBO Cylinder
RCA-SRA4R
n Model Description RCA SRA4R 　 I 　　20 　　　　　　　　　　　　　A1
Series 　Type 　Encoder type 　Motor type 　Lead 　Stroke 　Compatible Controllers 　Cable length 　　Option
5 : 5mm
2.5 : 2.5mm
O I N
For low-power
applications
nLeads and Payloads nStroke and Maximum Speed
Stroke
Lead
5
2.5
Lead
(mm)
5
(N) Model
2.5
Maximum payload (Note 1) Rated thrust
Horizontal (kg)
9
18
Vertical (kg)
3
6.5
41
81
Stroke
(mm)
RCA-SRA4R-I-20-5--A1-- ③ ② ①
RCA-SRA4R-I-20-2.5--A1-- ③ ② ①
20 to 200
(every 10mm)
(Note 1)
11RCA-SRA4R
ROBO Cylinder, Short Rod-Type, Actuator Diameter 45mm, Servo Motor,
Motor Reversing Specification
20 to 200
(every 10mm)
250
125
Type Cable symbol
Standard type
Type code
Special length
P (1m)
S (3m)
M (5m)
X06 (6m) – X10 (10m)
X11 (11m) – X15 (15m)
X16 (16m) – X20 (20m)
Item Descr ipt ion
±0.05mm
0.1mm or less
φ22mm
−
5000km
Drive System
Backlash
Rod diameter
Service life
B
FL
FLR
FT
FT2/FT4
LA
−
→P19
→P19
→P19
→P19
−
Brake
Flange bracket (front)
Foot brackets 2 (Mounted on right or left sides)
for energy saving
A1: ACON
RACON
ASEL
—
—
—
—
①Stroke
(mm)
SRA4
Encoder type
Incremental
20 to 50
60 to 100
150
200
P
T
Notes for
selection
(1) The payload capacity acceleration is 0.3G acceleration (0.2G
acceleration in vertical operation with lead 2.5). The above value
is the maximum acceleration.
(2) There is horizontal load capacity when external guides are used.
Take note that if external force is applied in any direction other
than moving direction the rod, the interlock may get damaged.
(Note 1) Every 50mm for strokes over 100mm.
20: Servo motor
20W
I: Incremental
specification
N: None
P: 1m
S: 3m
M: 5m
Xoo: Length
designation
Options below
See Pricing Table
20:20mm
to
200:200mm
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCA ROBO Cylinder
4-M6, depth 12
6 M10×1.25
(19.6)
17
34
34
31.5 4.8 4.2
㪤10×1.25
㱢20
㱢22
㱢32
22 7.5 (2D width area)
Cable joint
connector (*1)
4-M6, depth 12
34
45
95
45 50
34
14
14
22.5
(210)
Secure at least 100
E-M4, depth 10
E-M4, depth 10
B 22
34
24 C D×50 8
ME SE Home ME( 2)
34
17 C D×50 15
L
A
40.5
3
st
3
Dimensions of provided nut
ST: stroke
SE: stroke end
ME: mechanical end
Dimensions Drawing
Stroke 20 30 40 50 60 70 80 90 100 150 200
See page
RCA-SRA4R12
L
A
B
C
D
E
Weight (kg)
124.5
84
62
30
0
4
0.78
134.5
94
72
40
0
4
0.84
144.5
104
82
50
0
4
0.9
154.5
114
92
60
0
4
0.96
164.5
124
102
70
0
4
1.03
174.5
134
112
30
1
6
1.09
184.5
144
122
40
1
6
1.15
194.5
154
132
50
1
6
1.21
204.5
164
142
60
1
6
1.27
254.5
214
192
60
2
8
1.59
304.5
264
242
60
3
10
1.9
RCA Series actuators can be operated with the following controllers.. Select the type that is compatible with your application.
Model positioning points Input power Power-supply capacity
ACON-CG-20I①-NP-2-0
ACON-CY-20I①-NP-2-0
ACON-PL-20①-NP-2-0
ACON-PO-20I①-NP-2-0
ACON-SE-20I①-N-0-0
RACON-20①
ASEL-C-1-20I①-NP-2-0
Positioner
Type
Safety category
compatible
Positioner type
Solenoid valve
type
Pulse series
input type
(Differential line
Pulse series
input type
(Open collector
specification)
Serial
communication
type
Field network
type (*1)
Program
control type
Up to 512-point
positioning
possible
512 points
DC24V
(Standard)
Rated 1.3A
Peak 4.4A
(energy-saving)
Rated 1.3A
Peak 2.5A
(*2)
Same as solenoid
valve
Controlled
operation enabled
3 points
Differential line
driver compatible
Pulse series
input type
Open collector
compatible
Pulse series
input type
64 points
Serial
communications
Special Type
(−)
Field Network
Dedicated type
Programmed
operation enabled
Maximum biaxial
operation enabled
768 points
1500 points
ACON-C-20I①-NP-2-0
→P20
*ASEL is for uniaxial specification.
(*2) is entered as the code (LA) when designating for low-power applications.　
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCA ROBO Cylinder
RCA-SRGS4R ROBO Cylinder, Rod-Type with Short Single Guide, Actuator Diameter 45mm, Servo
n Model Description RCA SRGS4R 　 I 　　20 　　　　　　　　　　　　　A1
A1: ACON
O I N
For low-power
applications
Stroke
Lead
5
2.5
Lead
(mm)
5
(N) Model
2.5
Horizontal (kg)
9
18
Vertical (kg)
2
5.5
41
81
Stroke
(mm)
RCA-SRGS4R-I-20-5--A1-- ③ ② ①
RCA-SRGS4R-I-20-2.5--A1-- ③ ② ①
20 to 200
(every 10mm)
(Note 1)
①Stroke
(mm)
20 to 50
60 to 100
150
200
13 RCA-SRGS4R
Motor, Motor Reversing Specification
20 to 200
(every 10mm)
250
125
Type Cable symbol
Standard type
Type code
SRGS4R
Encoder type
Incremental
—
—
—
—
*Always input the direction the guide should be mounted on the model.
*The guide and foot bracket cannot be used in the same direction.
Special length
P (1m)
S (3m)
M (5m)
X06 (6m) – X10 (10m)
X11 (11m) – X15 (15m)
X16 (16m) – X20 (20m)
Item Descr ipt ion
±0.05mm
0.1mm or less
φ22mm
±0.05 degrees
5000km
Drive System
Backlash
Rod diameter
Service life
B
FLR
FT
FT2/FT4
GS2 to GS4
LA
−
→P19
→P19
→P19
→P14
−
Brake
Foot brackets 2 (Mounted on right and left sides)
Guide mounting direction
For low-power applications
P
T
Notes for
selection
See P.18 of the Technical Reference for the load capacities that
can be used with the single guide that is provided.
RACON
ASEL
20: Servo motor
20W
I: Incremental
specification
N: None
P: 1m
S: 3m
M: 5m
Xoo : Length
designation
Options below
See Pricing Table
20:20mm
to
200:200mm
5 : 5mm
2.5 : 2.5mm
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCA ROBO Cylinder
st 3 (Amount the shaft moves from the ME position on the home side to the home position)
4-M6, depth 12
ST: stroke
SE: stroke end
ME: mechanical end
34
34
5.5
㱢10
2.5 80 8
20 45 15
42.5 st+60 4
st
3 5 (Amount shaft pulls out at the SE position)
3
17 C D×50 15
34.5 8 A
E-M4, depth 10
24 C D×50 8
34
6-M5, depth 12
90.5
45.5 45
Dimensions Drawing
0.5 44 50.5
95
20
7.5 30
22.5
30 30 5
E-M4, depth 10
20 14.5
34
L
B 22
Cable joint
connector (*1)
䋨210䋩
㱢34
Secure at least 100
GS3
Mounted
on bottom
GS4
Mounted
on left
Actuator
GS2
Mounted
on right
(Visual A)
Guide Mounting Direction (see Visual A)
Stroke 20 30 40 50 60 70 80 90 100 150 200
See page
RCA-SRGS4R14
L
A
B
C
D
E
Weight (kg)
126.5
84
62
30
0
4
1.15
136.5
94
72
40
0
4
1.21
146.5
104
82
50
0
4
1.28
156.5
114
92
60
0
4
1.35
166.5
124
102
70
0
4
1.42
176.5
134
112
30
1
6
1.49
186.5
144
122
40
1
6
1.56
196.5
154
132
50
1
6
1.62
206.5
164
142
60
1
6
1.69
256.5
214
192
60
2
8
2.03
306.5
264
242
60
3
10
2.38
RCA Series actuators can be operated with the following controllers.. Select the type that is compatible with your application.
ACON-PL-20I①-NP-2-0
RACON-20①
Positioner
Type
Safety category
compatible
Positioner type
Solenoid valve
type
Pulse series
input type
(Differential line
Pulse series
input type
(Open collector
specification)
Serial
communication
type
Field network
type (*1)
Program
control type
Up to 512-point
positioning
possible
512 points
DC24V
(Standard)
Rated 1.3A
Peak 4.4A
(energy-saving)
Rated 1.3A
Peak 2.5A
(*2)
Same as solenoid
valve
Controlled
operation enabled
3 points
Differential line
driver compatible
Pulse series
input type
Open collector
compatible
Pulse series
input type
64 points
Serial
communications
Special Type
(−)
Field Network
Dedicated type
Programmed
operation enabled
Maximum biaxial
operation enabled
768 points
1500 points
→P20
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCA ROBO Cylinder
For low-power
applications
RCA-SRGD4R
n Model Description RCA SRGD4R 　 I 　　20 　　　　　　　　　　　　　A1
O I N
A1: ACON
RACON
ASEL
Stroke
Lead
5
2.5
Lead
(mm)
5
(N) Model
2.5
Horizontal (kg)
9
18
Vertical (kg)
2
5.5
41
81
Stroke
(mm)
RCA-SRGD4R-I-20-5--A1-- ③ ② ①
RCA-SRGD4R-I-20-2.5--A1-- ③ ② ①
20 to 200
(every 10mm)
(Note 1)
15 RCA-SRGD4R
ROBO Cylinder, Rod-Type with Short Double Guide, Actuator Diameter 45mm,
20 to 200
(every 10mm)
250
125
Type Cable symbol
Standard type
Type code
*The foot bracket cannot be mounted on the side.
Special length
P (1m)
S (3m)
M (5m)
X06 (6m) – X10 (10m)
X11 (11m) – X15 (15m)
X16 (16m) – X20 (20m)
Item Descr ipt ion
±0.05mm
0.1mm or less
φ22mm
±0.05 degrees
5000km
Drive System
Backlash
Rod diameter
Service life
B
FT
−
→P19
Brake
Foot bracket1(mounted on bottom)
—
—
—
—
①Stroke
(mm)
SRGD4
Encoder type
Incremental
20 to 50
60 to 100
150
200
P
T
Notes for
selection
See P.18 of the Technical Reference for the load capacities that
can be used with the double guide that is provided.
20: Servo motor
20W
I: Incremental
specification
N: None
P: 1m
S: 3m
M: 5m
Xoo : Length
designation
Options below
See Pricing Table
20:20mm
to
200:200mm
5 : 5mm
2.5 : 2.5mm
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCA ROBO Cylinder
ST: stroke
SE: stroke end
ME: mechanical end
15.5 7.5
st
20
8-M5, depth 12
(for mounting work piece)
34
17 C D×50 15
20 14.5
34.5 8 A
L
B 22
E-M4, depth 10
34
24 C D×50 8
㱢34
5.5
㱢10
45 45 7.5 15.5
42.5 st+60 4
3 5 (Amount shaft pulls out at the SE position) st 3 (Amount the shaft moves from the ME position on the home side to the home position)
3
34
4-M6, depth 12
34
4-M5
(for mounting to main unit)
0.5 44 50.5
95
34
7.5 30
45.5 45 45.5
30 30 30
105
126
136
E-M4, depth 10
Cable joint
connector (*1)
䋨210䋩
Secure at least 100
22.5
Dimensions Drawing
Stroke 20 30 40 50 60 70 80 90 100 150 200
See page
RCA-SRGD4R 16
L
A
B
C
D
E
Weight (kg)
126.5
84
62
30
0
4
1.42
136.5
94
72
40
0
4
1.49
146.5
104
82
50
0
4
1.56
156.5
114
92
60
0
4
1.64
166.5
124
102
70
0
4
1.71
176.5
134
112
30
1
6
1.79
186.5
144
122
40
1
6
1.86
196.5
154
132
50
1
6
1.94
206.5
164
142
60
1
6
2.01
256.5
214
192
60
2
8
2.38
306.5
264
242
60
3
10
2.75
RCA Series actuators can be operated with the following controllers. Select the type that is compatible with your application.
ACON-PL-20I①-NP-2-0
RACON-20①
Positioner
Type
Safety category
compatible
Positioner type
Solenoid valve
type
Pulse series
input type
(Differential line
Pulse series
input type
(Open collector
specification)
Serial
communication
type
Field network
type (*1)
Program
control type
Up to 512-point
positioning
possible
512 points
DC24V
(Standard)
Rated 1.3A
Peak 4.4A
(energy-saving)
Rated 1.3A
Peak 2.5A
(*2)
Same as solenoid
valve
Controlled
operation enabled
3 points
Differential line
driver compatible
Pulse series
input type
Open collector
compatible
Pulse series
input type
64 points
Serial
communications
Special Type
(−)
Field Network
Dedicated type
Programmed
operation enabled
Maximum biaxial
operation enabled
768 points
1500 points
→P20
Sold Serviced By:
ELECTROMATE
www.electromate.com

Technical Reference
Diagram Showing Relationship Between Push Force Current-Limiting
The push force applied in push-motion operation can be changed freely by changing the current-limiting value in
the controller.
Use the graph below to check the required push force.
200
150
100
50
Allowable Rotating Torque
2.5
2.0
1.5
1.0
0.5
17
Caution for Use
• The relationships of push force the and current-limiting value represent reference values and may
differ slightly from actual values.
• If the current-limiting value is less than 20%, the push force may fluctuate. Keep the current-limiting
value to 20% or above.
• The travel speed is fixed to 20 mm/s during push-motion operation.
• For applications requiring the use of push operation, please use the RCP2. (Pulse Motor)
䊥Le䊷ad䊄 22..55
If rotating torque is to be applied, keep the torque within the range specified below.
Take note that standard and single-guide types cannot receive rotating torque.
Allowable Rotating Moment
0.0
0 20 40 60 80 100 120 140 160 180 200
Stroke (mm)
Allowable Rotating Moment (N·m)
0
0 10 20 30 40 50 60 70
Current Limitations (Percentage %)
Push Force (N)
RCP2-SRA4R/SRGS4R/SRGD4R
Drawing Showing Correlation Between
Push Force Current Limitations
Lead 5
Sold Serviced By:
ELECTROMATE
www.electromate.com

Technical Reference
18
Relationship Between Allowable Load at Tip Traveling Life
The greater the load at the guide tip, the shorter the
traveling life becomes.
Select an appropriate model by considering an optimal
balance between load and life.
Horizontal
Single guide type Double guide type (vertical and horizontal)
Relationship Between Load on the Tip and Service Life
by Stroke Single Guide
40
35
30
25
20
15
10
5
0
10 100 1000 10000
Service Life (km)
Radial Load (N)
20
50
100
150
200
Relationship Between Load on the Tip and Service Life,
by Stroke Double Guide
Service Life (km)
Radial Load (N)
20
50
100
150
200
50
45
40
35
30
25
20
15
10
5
0
10 100 1000 10000
Radial Load Deflection at Tip
Single guide type
Double guide type (horizontal)
0 5 10 15 20 25 30 35 40 45 50
Home
20st
30st
40st
50st
60st
70st
80st
90st
100st
110st
120st
130st
140st
150st
160st
170st
180st
190st
200st
Radial Load Deflection on the Tip, Single Guide
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Deflection (mm)
Load (N)
Horizontal
0 5 10 15 20 25 30 35 40 45 50
Home
20st
30st
40st
50st
60st
70st
80st
90st
100st
110st
120st
130st
140st
150st
160st
170st
180st
190st
200st
Radial Load Deflection on the Tip, Double Guide (Horizontal)
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Deflection (mm)
Load (N)
Double guide type (vertical)
Radial Load Deflection on the Tip, Double Guide (Vertical)
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0 5 10 15 20 25 30 35 40 40 50
Load (N)
Deflection (mm)
Home
20st
30st
40st
50st
60st
70st
80st
90st
10st
11st
12st
13st
14st
15st
16st
17st
18st
19st
200st
F↓
F
Vertical
F
The diagrams below show how the load applied at the tip of the guide correlates with the deflection that results.
F↓
F
Vertical
F
Sold Serviced By:
ELECTROMATE
www.electromate.com

RCP2/RCA-Compatible Controllers
Actuator options (flange/foot brackets)
Model Options [FL]
Single Model, RCP2-FL-SRA4
Model Options [FT]
Single Model, RCP2-FT-SRA4
10 95
60
75
Maintenance parts (motor-encoder cable)
Motor-encoder cable for RCP2
Motor-encoder cable for RCA
(10)
19
L
Model Options [FLR]
Single Model, RCP2-FL-SRA4
4-φ6.6, through 4-φ6.6, through
Model Options [FT2 (mounted on right side/FT4
(mounted on left side)]
Single Model, RCP2-FTS-SRA4
（18）
10
0.25 44.5
4-φ6.6, through
5.25 34
(Front view) (Front view)
Controller side Actuator Side
（15）
（φ12）
When flange bracket (rear) is mounted
10 45
Ａ
ＶＭＭ
／Ａ
Ｂ
ＶＭＭ
／Ｂ
10 60
Black
White
Red
Green
Yellow
Brown
Pink (Red)
Pink (Blue)
White (Red)
White (Blue)
Orange (Red)
Orange (Blue)
Gray (Red)
Gray (Blue)
Orange (Blue consecutive)
Gray (Red consecutive)
Gray (Blue consecutive)
Shield
Ｂ1
Ａ2
Ａ1
Ｂ3
Ｂ2
Ａ3
Ａ1
Ｂ1
Ａ2
Ｂ2
Ａ3
Ｂ3
Ａ4
Ｂ4
Ａ5
Ｂ5
Ａ6
Ｂ6
Ａ7
Ｂ7
Ａ8
Ｂ8
Ａ9
Ｂ9
Ａ10
Ｂ10
Ａ11
Ｂ11
Ａ
ＶＭＭ
／Ａ
Ｂ
ＶＭＭ
／Ｂ
ＮＣ
ＮＣ
ＢＫ＋
ＢＫ−
ＬＳ＋
ＬＳ−
Ａ＋
Ａ−
Ｂ＋
Ｂ−
ＮＣ
ＶＰＳ
ＶＣＣ
ＧＮＤ
ＮＣ
ＦＧ
ＢＫ＋
ＢＫ−
ＬＳ＋
ＬＳ−
Ａ＋
Ａ−
Ｂ＋
Ｂ−
ＮＣ
ＶＰＳ
ＶＣＣ
ＧＮＤ
ＮＣ
ＦＧ
14
13
16
15
12
11
10
9
8
7
6
5
4
1
（18）
（8）
（20）
（8）
（5）
（30）
（23）
Signal Pin No. (Wire color) Signal Pin No.
Model CB-PCS-MPA□□□
*Enter the cable length (L) for □□□, up to a maximum compatible length of 20m.
Example: 080=8m
(Front view)
L
Controller side Actuator Side
Signal Pin No. Pin No. Signal
Ｕ
Ｖ
Ｗ
(Wire color)
Red
Yellow
Black
Yellow (Red)
Yellow (Blue)
Pink (Red)
Pink (Blue)
White (Red)
White (Blue)
Orange (Red)
Orange (Blue)
Gray (Red)
Gray (Blue)
Orange (Red consecutive)
Orange (Blue consecutive)
Gray (Red consecutive)
Gray (Blue consecutive)
Shield
1
2
3
Ａ1
Ｂ1
Ａ2
Ｂ2
Ａ3
Ｂ3
Ａ4
Ｂ4
Ａ5
Ｂ5
Ａ6
Ｂ6
Ａ7
Ｂ7
Ａ8
Ｂ8
Ａ9
Ｂ9
Ａ10
Ｂ10
Ａ11
Ｂ11
Ｕ
Ｖ
Ｗ
ＮＣ
ＮＣ
ＮＣ
ＢＫ＋
ＢＫ−
ＬＳ＋
ＬＳ−
Ａ＋
Ａ−
Ｂ＋
Ｂ−
Ｚ＋
Ｚ−
−
／ＰＳ
ＶＣＣ
ＧＮＤ
ＮＣ
ＦＧ
ＢＫ＋
ＢＫ−
ＬＳ＋
ＬＳ−
Ａ＋
Ａ−
Ｂ＋
Ｂ−
Ｚ＋
Ｚ−
−
／ＰＳ
ＶＣＣ
ＧＮＤ
ＮＣ
ＦＧ
16
15
18
17
14
13
12
11
10
9
8
7
6
5
1
(Front view)
(12)
(18)
(8)
(12)
(23)
(8)
(5)
(30)
(18)
Model CB-ACS-MPA□□□
*Enter the cable length (L) for □□□, up to a maximum compatible length of 20m.
Example: 080=8m
st+10
4-φ6.6, through
71
57
20
105
st+10
121
107
20
55
0.25 44.5
5.25 34
75
(40.5)
When flange bracket (front) is mounted
When foot bracket (bottom) is mounted When foot bracket (side) is mounted
Sold Serviced By:
ELECTROMATE
www.electromate.com

absolute unit
Not for use with simple
absolute unit
20
Model List
Model
Model
PCON/ACON
Name
Appearance
Features
C CG CY PL/PO SE
RPCON
RACON
(ROBONET)
PSEL/ASEL
Positioner type Solenoid valve type
Serial Communication
Type Program Type
Safety category
compatible type
Pulse in-line control
type
Field Network
type
Positioner can be
positioned for up to
512 points.
Can be operated
using the same control
as an air cylinder.
An in-line pulse
can be used to control
as desired
Serial Communication
Dedicated Controller
(*1)
Can be operated through
DeviceNet
CC-Link
ProfiBus
Programmable, Built-in
Sequence Function
.
Safety category
compatible specification
(*1) A Gateway unit (sold separately) is required to use RPCON/RACON.
PCON/ACON Controller
PCON/ACON 0
Type Motor/Encoder Type I/O Type I/O Cable Length Power supply Simple absolute unit
NP NPN specification
(standard)
PN PNP specification
N No I/O (SE type)
DeviceNet connection
DV specification
CC-Link connection
CC specification
ProfiBus connection
PR specification
0 No cable (*)
2 2m
3 3m
5 5m
NP NPN specification
(standard)
PN PNP specification
ABU For use with simple
0 DC24V
DeviceNet connection
DV specification
CC-Link connection
CC specification
ProfiBus connection
PR specification
0 DC24V
0 No cable (*)
2 2m
3 3m
5 5m
ABU
C Positioner type
CG Safety Category
Compatible Type
CY Solenoid valve type
PL Pulse in-line control type
(differential receiver type)
Pulse in-line control type
(open collector type)
PO
SE Serial Communication Type
ROBONET Controller
35PI For RCP2-SRA4R/
RPCON/RACON
PSEL/ASEL Controller
1
2
-ais specification
2-ais specification
SRGS4R/SRGD4R
35PIB Use with the brake specifi-cations
in the above model
20I For C-S4/
SS4/SD4
20IB se with the brake specifi-cations
in the above model
SRGS4R/SRGD4R
35PIB Use with the brake specifi-cations
in the above model
20I For RCA-SRA4R/
SRGS4R/SRGD4R
20IB Use with the brake specifi-cations
in the above model
Motor type Simple absolute unit
PSEL/ASEL C 0
Number of axes
for connection
Motor/Encoder Type I/O Type I/O Cable Length Power supply
(2-axis)
Motor/Encoder Type
(first axis)
* A Gateway unit is required to connect a network when
using the RPCON/RACON types.
See the ROBONET catalog for details.
*Information under “2-axis”
is not required for a 1-axis
specification.
SRGS4R/SRGD4R
For RCA-SRA4R/
20I SRGS4R/SRGD4R
35P For RCP2-SRA4R/
SRGS4R/SRGD4R
For RCA-SRA4R/
20 SRGS4R/SRGD4R
(*) The PCON/ACON-SE and PCON/ACON-C(CG)-DV/CC/PR
types have no I/O.
(*) The network specification (DV/CC/PR)
types have no I/O.
The network specification (DV/CC/PR) is
only compatible with the positioner type (C)
and safety category compatible type (CG).
For use with simple
absolute unit
Not for use with simple
absolute unit
Controllers for RCP2/RCA
Sold Serviced By:
ELECTROMATE
www.electromate.com

Specification Table
Operation method
Number of positions
I/O connector
Serial communications
Command pulse input method
Maximum input pulse frequency
Position detection method
Motor/Encoder cable
Input power
Power-supply
capacity
RCP2 (all models)
SRA4R
SRGS4R
SRGD4R
Rated 1.3A, max. 4.4A (standard specification)
Rated 1.3A, max. 2.5A (low-power specification)
RCA (*2)
Dimensional Outline Drawing
21
Item Specification
Controller type
PCON/ACON
C CG CY PL PO SE
Maximum number of control axes
Number of I/O
Peripheral Device
Cables for communicating
Dielectric strength voltage
Ambient operating temperature,
Ambient operating humidity.
Ingress Protection
Mass
1-axis
RPCON/RACON
（ROBONET）
Up to 16-axis can be
connected and operated.
Field Network
768 points
−
CB-PAC-PIO CB-PACY-PIO CB-PACPU-PIO CB-RCB-CTL002
− Differential line driver Open collector
200kpps 60kpps
− −
Incremental encoder
CB-PCS-MPA (for PCON)/CB-ACS-MPA(for ACON)(Max. length 20m)
DC24V±10％
−
−
−
Maximum 2A Max. 2A (*1)
DC500V　1MΩ
0 to 40°C　10 to 95% (free from condensation or corrosive gases)
IP20
Approx. 300g Approx. 130g Approx. 200g
PSEL/ASEL
2-axes
Program
1500 points
34-pin connector
24 input
8 output
RS232
CB-DS-PIO
Max. 5.5A
DC500V
10MΩ
Approx. 450g
Positioner type
512 points
40-pin connector
16 input, 16 output
Solenoid valve type Pulse series input type
3 points −
12-pin connector 14-pin connector
4 input
6 output
4 input, 4 output
RS485
Serial Communication Type
64 points
−
−
(*1) During use, the following amount of power is required: 2A x the number of units used, plus the power consumed by the Gateway unit (approx. 0.6A).
(*2) The following power capacity is required for RACON: ACON power capacity x number of units used, plus the power consumed by the Gateway unit (approx. 0.6A).
(*3) The following power capacity is required for ASEL: ACON power capacity x number of control axes, plus the power for the control unit (1.2A).
(*3)
PCON-C/CG
ACON-C/CG
PCON-CY/PL/PO/SE
ACON-CY/PL/PO/SE
RPCON
RACON
PSEL
ASEL
35
178.5
170.5
㱢5
84
68.1
5
120
112
35
5
㱢5 68.1
䋨0.5䋩 34
䋨10䋩
5 100
䋨160䋩 (50 from the center
(69.3 from the DIN rail surface)
73.3
of the DIN rail)
35.4
*Can be mounted on the
DIN rail (35mm)
㱢5
159
151
137
5
3
43
(80) 110
Sold Serviced By:
ELECTROMATE
www.electromate.com

Controller Options
Teaching Pendant This is a teaching device that provides information on functions such as
position input, running tests, and monitoring.
RCM-P CON-T SEL-T-J SEL-TD-J
22
Item RCM-E

×

×
×

×

×
×
×
×
×
×
×
×
×
×

×
×
×

×

−
Approx. 400g
−
Approx. 360g Approx. 400g
IP54
Approx. 400g Approx. 400g
Exterior dimensions
Compatible controllers
Position input
Program input
Actuator operation
Display
3 position enabling switch
Compatible with the ANSI standard
Compatible with the CE mark
Compatible with the UL standard
Cable length
Ingress Protection
Mass
PCON/ACON/RPCON/RACON PSEL/ASEL
16 characters x 2 lines, LCD display 20 characters x 4 lines, LCD display
5m
0 to 40°C temperature, 85% RH or less
PC-compatible software
(Windows only)
Feature A startup support software program offering program/position
input function, test operation function, monitoring function,
and more. The functions needed for debugging have been
enhanced to help reduce the startup time.
PC-compatible software for PCON/ACON/RPCON/RACON (for RS232 connection)
RCM−101−USB (comes with external device communication cable + USB conversion adapter + USB cable)
5m 0.2m
Connector
conversion cable:
CB-SEL-SJ002
PC software (CD)
RS232C cable:
CB-ST-E1MW050-EB
Dummy plug
1m
DP-3
PC software (CD)
USB cable
CB-SEL-USB010
Model
Configuration
Model
Configuration
IA−101−X−MW−J (comes with RS232C cable + connector conversion cable)
Model
Configuration
IA−101−X−USB (for USB cable)
USB conversion adapter
RCB-CV-USB
1m 5m
PC software (CD)
USB cable
CB-SEL-USB010
Model
Configuration
RCM−101−MW (comes with external device communication cable + RS232 conversion unit)
RS232 conversion adapter
RCB-CV-MW
0.3m
5m
External device
communication cable
CB-RCA-SIO050
External device
communication cable
CB-RCA-SIO050
PC software (CD)
PC-compatible software for PCON/ACON/RPCON/RACON (for USB connection)
PC-compatible software for PSEL/ASEL (for RS232 connection)
PC-compatible software (for USB connection)
Sold Serviced By:
ELECTROMATE
www.electromate.com

Iai rcp2 rca_sra_specsheet

More Related Content

What's hot (20)

Similar to Iai rcp2 rca_sra_specsheet (20)

More from Electromate (20)

Recently uploaded (20)

Iai rcp2 rca_sra_specsheet